select SPI
imply CMD_DM
-config TARGET_DEVKIT3250
- bool "Support devkit3250"
- select CPU_ARM926EJS
- select SUPPORT_SPL
-
-config TARGET_WORK_92105
- bool "Support work_92105"
- select CPU_ARM926EJS
- select SUPPORT_SPL
-
config TARGET_APF27
bool "Support apf27"
select CPU_ARM926EJS
imply CMD_DM
imply FAT_WRITE
+config ARCH_BCM63158
+ bool "Broadcom BCM63158 family"
+ select DM
+ select OF_CONTROL
+ imply CMD_DM
+
+config ARCH_BCM6858
+ bool "Broadcom BCM6858 family"
+ select DM
+ select OF_CONTROL
+ imply CMD_DM
+
config TARGET_VEXPRESS_CA15_TC2
bool "Support vexpress_ca15_tc2"
select CPU_V7A
select DM_SPI
select DM_SPI_FLASH
select SPI
+ imply SYS_THUMB_BUILD
imply CMD_DM
imply FAT_WRITE
targeted at media players and tablet computers. We currently
support the S905 (GXBaby) 64-bit SoC.
+config ARCH_MEDIATEK
+ bool "MediaTek SoCs"
+ select BINMAN
+ select DM
+ select OF_CONTROL
+ select SPL_DM if SPL
+ select SPL_LIBCOMMON_SUPPORT if SPL
+ select SPL_LIBGENERIC_SUPPORT if SPL
+ select SPL_OF_CONTROL if SPL
+ select SUPPORT_SPL
+ help
+ Support for the MediaTek SoCs family developed by MediaTek Inc.
+ Please refer to doc/README.mediatek for more information.
+
+config ARCH_LPC32XX
+ bool "NXP LPC32xx platform"
+ select CPU_ARM926EJS
+ select DM
+ select DM_GPIO
+ select DM_SERIAL
+ select SPL_DM if SPL
+ select SUPPORT_SPL
+ imply CMD_DM
+
config ARCH_IMX8
bool "NXP i.MX8 platform"
select ARM64
select DM
select OF_CONTROL
-config ARCH_MX8M
+config ARCH_IMX8M
bool "NXP i.MX8M platform"
select ARM64
select DM
imply CMD_DM
imply FAT_WRITE
imply SYS_THUMB_BUILD
+ imply ARCH_MISC_INIT if DISPLAY_CPUINFO
config TARGET_S32V234EVB
bool "Support s32v234evb"
select SPL_DM_RESET if DM_RESET
select SPL_DM_SERIAL
select SPL_LIBCOMMON_SUPPORT
- select SPL_LIBDISK_SUPPORT
select SPL_LIBGENERIC_SUPPORT
- select SPL_MMC_SUPPORT if DM_MMC
select SPL_NAND_SUPPORT if SPL_NAND_DENALI
select SPL_OF_CONTROL
select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10
select SPL_SERIAL_SUPPORT
- select SPL_SPI_FLASH_SUPPORT if SPL_SPI_SUPPORT
- select SPL_SPI_SUPPORT if DM_SPI
select SPL_WATCHDOG_SUPPORT
select SUPPORT_SPL
- select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
select SYS_NS16550
select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
imply CMD_DM
imply DM_SPI
imply DM_SPI_FLASH
imply FAT_WRITE
+ imply SPL_LIBDISK_SUPPORT
+ imply SPL_MMC_SUPPORT
imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
+ imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
+ imply SPL_SPI_FLASH_SUPPORT
+ imply SPL_SPI_SUPPORT
config ARCH_SUNXI
bool "Support sunxi (Allwinner) SoCs"
select CMD_GPIO
select CMD_MMC if MMC
select CMD_USB if DISTRO_DEFAULTS
+ select CLK
select DM
select DM_ETH
select DM_GPIO
select DM_KEYBOARD
+ select DM_MMC if MMC
+ select DM_SCSI if SCSI
select DM_SERIAL
select DM_USB if DISTRO_DEFAULTS
select OF_BOARD_SETUP
imply CMD_UBI if NAND
imply DISTRO_DEFAULTS
imply FAT_WRITE
+ imply FIT
imply OF_LIBFDT_OVERLAY
imply PRE_CONSOLE_BUFFER
imply SPL_GPIO_SUPPORT
imply SPL_LIBCOMMON_SUPPORT
- imply SPL_LIBDISK_SUPPORT
imply SPL_LIBGENERIC_SUPPORT
imply SPL_MMC_SUPPORT if MMC
imply SPL_POWER_SUPPORT
imply SPL_SERIAL_SUPPORT
imply USB_GADGET
+config ARCH_VERSAL
+ bool "Support Xilinx Versal Platform"
+ select ARM64
+ select CLK
+ select DM
+ select DM_ETH if NET
+ select DM_MMC if MMC
+ select DM_SERIAL
+ select OF_CONTROL
+
config ARCH_VF610
bool "Freescale Vybrid"
select CPU_V7A
select CLK
select CPU_V7R
select DM
+ select DM_ETH if NET
+ select DM_MMC if MMC
select DM_SERIAL
select OF_CONTROL
imply CMD_DM
+ imply DM_USB_GADGET
config ARCH_ZYNQMP
bool "Xilinx ZynqMP based platform"
select ARM64
select CLK
select DM
+ select DM_ETH if NET
+ select DM_MMC if MMC
select DM_SERIAL
+ select DM_SPI if SPI
+ select DM_SPI_FLASH if DM_SPI
select DM_USB if USB
select OF_CONTROL
select SPL_BOARD_INIT if SPL
select SPL_CLK if SPL
+ select SPL_SEPARATE_BSS if SPL
select SUPPORT_SPL
imply BOARD_LATE_INIT
imply CMD_DM
imply FAT_WRITE
+ imply MP
+ imply DM_USB_GADGET
config TEGRA
bool "NVIDIA Tegra"
select ARCH_MISC_INIT
select ARM64
select ARMV8_MULTIENTRY
+ select FSL_DDR_SYNC_REFRESH
help
Support for Freescale LS2080A_EMU platform
The LS2080A Development System (EMULATOR) is a pre silicon
select ARMV8_MULTIENTRY
select BOARD_LATE_INIT
select SUPPORT_SPL
+ select FSL_DDR_INTERACTIVE if !SD_BOOT
help
Support for NXP LS1088AQDS platform
The LS1088A Development System (QDS) is a high-performance
select SUPPORT_SPL
imply SCSI
imply SCSI_AHCI
+ select FSL_DDR_BIST
+ select FSL_DDR_INTERACTIVE if !SPL
help
Support for Freescale LS2080AQDS platform
The LS2080A Development System (QDS) is a high-performance
select ARMV8_MULTIENTRY
select BOARD_LATE_INIT
select SUPPORT_SPL
+ select FSL_DDR_BIST
+ select FSL_DDR_INTERACTIVE if !SPL
imply SCSI
imply SCSI_AHCI
help
development platform that supports the QorIQ LS2081A/LS2041A
Layerscape Architecture processor.
+config TARGET_LX2160ARDB
+ bool "Support lx2160ardb"
+ select ARCH_LX2160A
+ select ARCH_MISC_INIT
+ select ARM64
+ select ARMV8_MULTIENTRY
+ select BOARD_LATE_INIT
+ help
+ Support for NXP LX2160ARDB platform.
+ The lx2160ardb (LX2160A Reference design board (RDB)
+ is a high-performance development platform that supports the
+ QorIQ LX2160A/LX2120A/LX2080A Layerscape Architecture processor.
+
+config TARGET_LX2160AQDS
+ bool "Support lx2160aqds"
+ select ARCH_LX2160A
+ select ARCH_MISC_INIT
+ select ARM64
+ select ARMV8_MULTIENTRY
+ select BOARD_LATE_INIT
+ help
+ Support for NXP LX2160AQDS platform.
+ The lx2160aqds (LX2160A QorIQ Development System (QDS)
+ is a high-performance development platform that supports the
+ QorIQ LX2160A/LX2120A/LX2080A Layerscape Architecture processor.
+
config TARGET_HIKEY
bool "Support HiKey 96boards Consumer Edition Platform"
select ARM64
select ARMV8_MULTIENTRY
select BOARD_LATE_INIT
select SUPPORT_SPL
+ select FSL_DDR_INTERACTIVE if !SD_BOOT
help
Support for NXP LS1088ARDB platform.
The LS1088A Reference design board (RDB) is a high-performance
select LS1_DEEP_SLEEP
select SUPPORT_SPL
select SYS_FSL_DDR
+ select FSL_DDR_INTERACTIVE
imply SCSI
config TARGET_LS1021ATWR
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select SUPPORT_SPL
+ select FSL_DDR_INTERACTIVE if !SPL
imply SCSI
+ imply SCSI_AHCI
help
Support for Freescale LS1043AQDS platform.
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
select SUPPORT_SPL
- imply SCSI
help
Support for Freescale LS1043ARDB platform.
select BOARD_LATE_INIT
select DM_SPI_FLASH if DM_SPI
select SUPPORT_SPL
+ select FSL_DDR_BIST if !SPL
+ select FSL_DDR_INTERACTIVE if !SPL
+ select FSL_DDR_INTERACTIVE if !SPL
imply SCSI
help
Support for Freescale LS1046AQDS platform.
select DM_SPI_FLASH if DM_SPI
select POWER_MC34VR500
select SUPPORT_SPL
+ select FSL_DDR_BIST
+ select FSL_DDR_INTERACTIVE if !SPL
imply SCSI
help
Support for Freescale LS1046ARDB platform.
select SYSRESET
select SYS_THUMB_BUILD
imply CMD_DM
+ imply CMD_POWEROFF
+ imply ENV_VARS_UBOOT_RUNTIME_CONFIG
help
Support for STM32MP SoC family developed by STMicroelectronics,
MPUs based on ARM cortex A core
- U-BOOT is running in DDR and SPL support is the unsecure First Stage
- BootLoader (FSBL)
+ U-BOOT is running in DDR, loaded by the First Stage BootLoader (FSBL).
+ FSBL can be TF-A: Trusted Firmware for Cortex A, for trusted boot
+ chain.
+ SPL is the unsecure FSBL for the basic boot chain.
config ARCH_ROCKCHIP
bool "Support Rockchip SoCs"
authenticated) and the code. See the doc/README.ti-secure
file for further details.
+if AM43XX || AM33XX || OMAP54XX || ARCH_KEYSTONE
+config ISW_ENTRY_ADDR
+ hex "Address in memory or XIP address of bootloader entry point"
+ default 0x402F4000 if AM43XX
+ default 0x402F0400 if AM33XX
+ default 0x40301350 if OMAP54XX
+ help
+ After any reset, the boot ROM searches the boot media for a valid
+ boot image. For non-XIP devices, the ROM then copies the image into
+ internal memory. For all boot modes, after the ROM processes the
+ boot image it eventually computes the entry point address depending
+ on the device type (secure/non-secure), boot media (xip/non-xip) and
+ image headers.
+endif
+
source "arch/arm/mach-aspeed/Kconfig"
source "arch/arm/mach-at91/Kconfig"
source "arch/arm/mach-kirkwood/Kconfig"
+source "arch/arm/cpu/arm926ejs/lpc32xx/Kconfig"
+
source "arch/arm/mach-mvebu/Kconfig"
source "arch/arm/cpu/armv7/ls102xa/Kconfig"
source "arch/arm/mach-imx/imx8/Kconfig"
-source "arch/arm/mach-imx/mx8m/Kconfig"
+source "arch/arm/mach-imx/imx8m/Kconfig"
source "arch/arm/mach-imx/mxs/Kconfig"
source "arch/arm/mach-meson/Kconfig"
+source "arch/arm/mach-mediatek/Kconfig"
+
source "arch/arm/mach-qemu/Kconfig"
source "arch/arm/mach-rockchip/Kconfig"
source "arch/arm/mach-zynq/Kconfig"
+source "arch/arm/mach-zynqmp/Kconfig"
+
+source "arch/arm/mach-versal/Kconfig"
+
source "arch/arm/mach-zynqmp-r5/Kconfig"
source "arch/arm/cpu/armv7/Kconfig"
-source "arch/arm/cpu/armv8/zynqmp/Kconfig"
-
source "arch/arm/cpu/armv8/Kconfig"
source "arch/arm/mach-imx/Kconfig"
source "board/bosch/shc/Kconfig"
+source "board/bosch/guardian/Kconfig"
source "board/CarMediaLab/flea3/Kconfig"
source "board/Marvell/aspenite/Kconfig"
source "board/Marvell/gplugd/Kconfig"
source "board/armltd/vexpress64/Kconfig"
source "board/broadcom/bcm23550_w1d/Kconfig"
source "board/broadcom/bcm28155_ap/Kconfig"
+source "board/broadcom/bcm963158/Kconfig"
+source "board/broadcom/bcm968580xref/Kconfig"
source "board/broadcom/bcmcygnus/Kconfig"
source "board/broadcom/bcmnsp/Kconfig"
source "board/broadcom/bcmns2/Kconfig"
source "board/cavium/thunderx/Kconfig"
source "board/cirrus/edb93xx/Kconfig"
source "board/eets/pdu001/Kconfig"
+source "board/emulation/qemu-arm/Kconfig"
source "board/freescale/ls2080a/Kconfig"
source "board/freescale/ls2080aqds/Kconfig"
source "board/freescale/ls2080ardb/Kconfig"
source "board/freescale/ls1012aqds/Kconfig"
source "board/freescale/ls1012ardb/Kconfig"
source "board/freescale/ls1012afrdm/Kconfig"
+source "board/freescale/lx2160a/Kconfig"
source "board/freescale/mx35pdk/Kconfig"
source "board/freescale/s32v234evb/Kconfig"
source "board/grinn/chiliboard/Kconfig"
source "board/tcl/sl50/Kconfig"
source "board/ucRobotics/bubblegum_96/Kconfig"
source "board/birdland/bav335x/Kconfig"
-source "board/timll/devkit3250/Kconfig"
source "board/toradex/colibri_pxa270/Kconfig"
source "board/vscom/baltos/Kconfig"
source "board/woodburn/Kconfig"
-source "board/work-microwave/work_92105/Kconfig"
source "board/xilinx/Kconfig"
source "board/xilinx/zynq/Kconfig"
source "board/xilinx/zynqmp/Kconfig"
projects / oweals / u-boot.git / blobdiff