projects / oweals / u-boot.git / blobdiff
? search:
summary | shortlog | log | commit | commitdiff | tree
raw | inline | side by side
ARM: zynq: Change zc770 xm011 Nand x16 configurations
[oweals/u-boot.git] / arch / arm / Kconfig
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 36c9c2fecd01599e176198879b77f0d07ab532e6..bbb1e2738bfe76a48ff0371ed2d80d638ffae243 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -12,6 +12,7 @@ config ARM64
 if ARM64
 config POSITION_INDEPENDENT
        bool "Generate position-independent pre-relocation code"
+       select INIT_SP_RELATIVE
        help
          U-Boot expects to be linked to a specific hard-coded address, and to
          be loaded to and run from that address. This option lifts that
@@ -61,6 +62,16 @@ config LNX_KRNL_IMG_TEXT_OFFSET_BASE
 endif
 endif
 
+config GIC_V3_ITS
+       bool "ARM GICV3 ITS"
+       help
+         ARM GICV3 Interrupt translation service (ITS).
+         Basic support for programming locality specific peripheral
+         interrupts (LPI) configuration tables and enable LPI tables.
+         LPI configuration table can be used by u-boot or Linux.
+         ARM GICV3 has limitation, once the LPI table is enabled, LPI
+         configuration table can not be re-programmed, unless GICV3 reset.
+
 config STATIC_RELA
        bool
        default y if ARM64 && !POSITION_INDEPENDENT
@@ -587,15 +598,6 @@ config TARGET_X600
        select PL011_SERIAL
        select SUPPORT_SPL
 
-config TARGET_WOODBURN
-       bool "Support woodburn"
-       select CPU_ARM1136
-
-config TARGET_WOODBURN_SD
-       bool "Support woodburn_sd"
-       select CPU_ARM1136
-       select SUPPORT_SPL
-
 config TARGET_FLEA3
        bool "Support flea3"
        select CPU_ARM1136
@@ -622,6 +624,12 @@ config ARCH_BCM63158
        select OF_CONTROL
        imply CMD_DM
 
+config ARCH_BCM68360
+       bool "Broadcom BCM68360 family"
+       select DM
+       select OF_CONTROL
+       imply CMD_DM
+
 config ARCH_BCM6858
        bool "Broadcom BCM6858 family"
        select DM
@@ -761,7 +769,6 @@ config ARCH_MESON
 
 config ARCH_MEDIATEK
        bool "MediaTek SoCs"
-       select BINMAN
        select DM
        select OF_CONTROL
        select SPL_DM if SPL
@@ -797,6 +804,14 @@ config ARCH_IMX8M
        select SUPPORT_SPL
        imply CMD_DM
 
+config ARCH_IMXRT
+       bool "NXP i.MXRT platform"
+       select CPU_V7M
+       select DM
+       select DM_SERIAL
+       select SUPPORT_SPL
+       imply CMD_DM
+
 config ARCH_MX23
        bool "NXP i.MX23 family"
        select CPU_ARM926EJS
@@ -823,6 +838,7 @@ config ARCH_MX7ULP
        select CPU_V7A
        select ROM_UNIFIED_SECTIONS
        imply MXC_GPIO
+       imply SYS_THUMB_BUILD
 
 config ARCH_MX7
        bool "Freescale MX7"
@@ -833,6 +849,7 @@ config ARCH_MX7
        select SYS_FSL_SEC_COMPAT_4
        select SYS_FSL_SEC_LE
        imply MXC_GPIO
+       imply SYS_THUMB_BUILD
 
 config ARCH_MX6
        bool "Freescale MX6"
@@ -840,8 +857,8 @@ config ARCH_MX6
        select SYS_FSL_HAS_SEC if IMX_HAB
        select SYS_FSL_SEC_COMPAT_4
        select SYS_FSL_SEC_LE
-       select SYS_THUMB_BUILD if SPL
        imply MXC_GPIO
+       imply SYS_THUMB_BUILD
 
 if ARCH_MX6
 config SPL_LDSCRIPT
@@ -905,7 +922,7 @@ config ARCH_SOCFPGA
        bool "Altera SOCFPGA family"
        select ARCH_EARLY_INIT_R
        select ARCH_MISC_INIT if !TARGET_SOCFPGA_ARRIA10
-       select ARM64 if TARGET_SOCFPGA_STRATIX10
+       select ARM64 if TARGET_SOCFPGA_STRATIX10 || TARGET_SOCFPGA_AGILEX
        select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
        select DM
        select DM_SERIAL
@@ -917,7 +934,7 @@ config ARCH_SOCFPGA
        select SPL_LIBGENERIC_SUPPORT
        select SPL_NAND_SUPPORT if SPL_NAND_DENALI
        select SPL_OF_CONTROL
-       select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10
+       select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10 || TARGET_SOCFPGA_AGILEX
        select SPL_SERIAL_SUPPORT
        select SPL_SYSRESET
        select SPL_WATCHDOG_SUPPORT
@@ -972,6 +989,8 @@ config ARCH_SUNXI
        select USB_KEYBOARD if DISTRO_DEFAULTS
        select USB_STORAGE if DISTRO_DEFAULTS
        select SPL_USE_TINY_PRINTF
+       select USE_PREBOOT
+       select SYS_RELOC_GD_ENV_ADDR
        imply CMD_DM
        imply CMD_GPT
        imply CMD_UBI if MTD_RAW_NAND
@@ -988,6 +1007,24 @@ config ARCH_SUNXI
        imply SPL_SERIAL_SUPPORT
        imply USB_GADGET
 
+config ARCH_U8500
+       bool "ST-Ericsson U8500 Series"
+       select CPU_V7A
+       select DM
+       select DM_GPIO
+       select DM_MMC if MMC
+       select DM_SERIAL
+       select DM_USB if USB
+       select OF_CONTROL
+       select SYSRESET
+       select TIMER
+       imply ARM_PL180_MMCI
+       imply DM_RTC
+       imply NOMADIK_MTU_TIMER
+       imply PL01X_SERIAL
+       imply RTC_PL031
+       imply SYSRESET_SYSCON
+
 config ARCH_VERSAL
        bool "Support Xilinx Versal Platform"
        select ARM64
@@ -1096,7 +1133,6 @@ config TARGET_VEXPRESS64_JUNO
 config TARGET_LS2080A_EMU
        bool "Support ls2080a_emu"
        select ARCH_LS2080A
-       select ARCH_MISC_INIT
        select ARM64
        select ARMV8_MULTIENTRY
        select FSL_DDR_SYNC_REFRESH
@@ -1109,7 +1145,6 @@ config TARGET_LS2080A_EMU
 config TARGET_LS2080A_SIMU
        bool "Support ls2080a_simu"
        select ARCH_LS2080A
-       select ARCH_MISC_INIT
        select ARM64
        select ARMV8_MULTIENTRY
        select BOARD_LATE_INIT
@@ -1122,7 +1157,6 @@ config TARGET_LS2080A_SIMU
 config TARGET_LS1088AQDS
        bool "Support ls1088aqds"
        select ARCH_LS1088A
-       select ARCH_MISC_INIT
        select ARM64
        select ARMV8_MULTIENTRY
        select ARCH_SUPPORT_TFABOOT
@@ -1138,7 +1172,6 @@ config TARGET_LS1088AQDS
 config TARGET_LS2080AQDS
        bool "Support ls2080aqds"
        select ARCH_LS2080A
-       select ARCH_MISC_INIT
        select ARM64
        select ARMV8_MULTIENTRY
        select ARCH_SUPPORT_TFABOOT
@@ -1157,7 +1190,6 @@ config TARGET_LS2080AQDS
 config TARGET_LS2080ARDB
        bool "Support ls2080ardb"
        select ARCH_LS2080A
-       select ARCH_MISC_INIT
        select ARM64
        select ARMV8_MULTIENTRY
        select ARCH_SUPPORT_TFABOOT
@@ -1176,7 +1208,6 @@ config TARGET_LS2080ARDB
 config TARGET_LS2081ARDB
        bool "Support ls2081ardb"
        select ARCH_LS2080A
-       select ARCH_MISC_INIT
        select ARM64
        select ARMV8_MULTIENTRY
        select BOARD_LATE_INIT
@@ -1190,7 +1221,6 @@ config TARGET_LS2081ARDB
 config TARGET_LX2160ARDB
        bool "Support lx2160ardb"
        select ARCH_LX2160A
-       select ARCH_MISC_INIT
        select ARM64
        select ARMV8_MULTIENTRY
        select ARCH_SUPPORT_TFABOOT
@@ -1204,7 +1234,6 @@ config TARGET_LX2160ARDB
 config TARGET_LX2160AQDS
        bool "Support lx2160aqds"
        select ARCH_LX2160A
-       select ARCH_MISC_INIT
        select ARM64
        select ARMV8_MULTIENTRY
        select ARCH_SUPPORT_TFABOOT
@@ -1327,7 +1356,6 @@ config TARGET_LS1028AQDS
        select ARMV8_MULTIENTRY
        select ARCH_SUPPORT_TFABOOT
        select BOARD_LATE_INIT
-       select ARCH_MISC_INIT
        help
          Support for Freescale LS1028AQDS platform
          The LS1028A Development System (QDS) is a high-performance
@@ -1340,6 +1368,7 @@ config TARGET_LS1028ARDB
        select ARM64
        select ARMV8_MULTIENTRY
        select ARCH_SUPPORT_TFABOOT
+       select BOARD_LATE_INIT
        help
          Support for Freescale LS1028ARDB platform
          The LS1028A Development System (RDB) is a high-performance
@@ -1349,7 +1378,6 @@ config TARGET_LS1028ARDB
 config TARGET_LS1088ARDB
        bool "Support ls1088ardb"
        select ARCH_LS1088A
-       select ARCH_MISC_INIT
        select ARM64
        select ARMV8_MULTIENTRY
        select ARCH_SUPPORT_TFABOOT
@@ -1513,6 +1541,7 @@ config ARCH_UNIPHIER
        select DM_GPIO
        select DM_I2C
        select DM_MMC
+       select DM_MTD
        select DM_RESET
        select DM_SERIAL
        select DM_USB
@@ -1590,6 +1619,7 @@ config ARCH_STM32MP
 config ARCH_ROCKCHIP
        bool "Support Rockchip SoCs"
        select BLK
+       select BINMAN if !ARM64
        select DM
        select DM_GPIO
        select DM_I2C
@@ -1638,6 +1668,10 @@ config TARGET_DURIAN
          Support for durian platform.
          It has 2GB Sdram, uart and pcie.
 
+config TARGET_PRESIDIO_ASIC
+       bool "Support Cortina Presidio ASIC Platform"
+       select ARM64
+
 endchoice
 
 config ARCH_SUPPORT_TFABOOT
@@ -1720,6 +1754,8 @@ source "arch/arm/mach-imx/imx8/Kconfig"
 
 source "arch/arm/mach-imx/imx8m/Kconfig"
 
+source "arch/arm/mach-imx/imxrt/Kconfig"
+
 source "arch/arm/mach-imx/mxs/Kconfig"
 
 source "arch/arm/mach-omap2/Kconfig"
@@ -1756,6 +1792,8 @@ source "arch/arm/mach-sunxi/Kconfig"
 
 source "arch/arm/mach-tegra/Kconfig"
 
+source "arch/arm/mach-u8500/Kconfig"
+
 source "arch/arm/mach-uniphier/Kconfig"
 
 source "arch/arm/cpu/armv7/vf610/Kconfig"
@@ -1782,9 +1820,11 @@ source "board/Marvell/gplugd/Kconfig"
 source "board/armadeus/apf27/Kconfig"
 source "board/armltd/vexpress/Kconfig"
 source "board/armltd/vexpress64/Kconfig"
+source "board/cortina/presidio-asic/Kconfig"
 source "board/broadcom/bcm23550_w1d/Kconfig"
 source "board/broadcom/bcm28155_ap/Kconfig"
 source "board/broadcom/bcm963158/Kconfig"
+source "board/broadcom/bcm968360bg/Kconfig"
 source "board/broadcom/bcm968580xref/Kconfig"
 source "board/broadcom/bcmcygnus/Kconfig"
 source "board/broadcom/bcmnsp/Kconfig"
@@ -1833,7 +1873,6 @@ source "board/birdland/bav335x/Kconfig"
 source "board/toradex/colibri_pxa270/Kconfig"
 source "board/variscite/dart_6ul/Kconfig"
 source "board/vscom/baltos/Kconfig"
-source "board/woodburn/Kconfig"
 source "board/xilinx/Kconfig"
 source "board/xilinx/zynq/Kconfig"
 source "board/xilinx/zynqmp/Kconfig"
Unnamed repository; edit this file 'description' to name the repository.