Merge tag 'uniphier-v2020.04-3' of https://gitlab.denx.de/u-boot/custodians/u-boot...

[oweals/u-boot.git] / arch / arm / Kconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 0bc4322c51b7ede4634833902056e0f05a598d93..8d9f7fcce78dcb934f44598252b98355dd5a9ee7 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -12,6 +12,7 @@ config ARM64
 if ARM64
 config POSITION_INDEPENDENT
        bool "Generate position-independent pre-relocation code"
+       select INIT_SP_RELATIVE
        help
          U-Boot expects to be linked to a specific hard-coded address, and to
          be loaded to and run from that address. This option lifts that
@@ -61,6 +62,16 @@ config LNX_KRNL_IMG_TEXT_OFFSET_BASE
 endif
 endif
 
+config GIC_V3_ITS
+       bool "ARM GICV3 ITS"
+       help
+         ARM GICV3 Interrupt translation service (ITS).
+         Basic support for programming locality specific peripheral
+         interrupts (LPI) configuration tables and enable LPI tables.
+         LPI configuration table can be used by u-boot or Linux.
+         ARM GICV3 has limitation, once the LPI table is enabled, LPI
+         configuration table can not be re-programmed, unless GICV3 reset.
+
 config STATIC_RELA
        bool
        default y if ARM64 && !POSITION_INDEPENDENT
@@ -622,6 +633,12 @@ config ARCH_BCM63158
        select OF_CONTROL
        imply CMD_DM
 
+config ARCH_BCM68360
+       bool "Broadcom BCM68360 family"
+       select DM
+       select OF_CONTROL
+       imply CMD_DM
+
 config ARCH_BCM6858
        bool "Broadcom BCM6858 family"
        select DM
@@ -797,6 +814,14 @@ config ARCH_IMX8M
        select SUPPORT_SPL
        imply CMD_DM
 
+config ARCH_IMXRT
+       bool "NXP i.MXRT platform"
+       select CPU_V7M
+       select DM
+       select DM_SERIAL
+       select SUPPORT_SPL
+       imply CMD_DM
+
 config ARCH_MX23
        bool "NXP i.MX23 family"
        select CPU_ARM926EJS
@@ -907,7 +932,7 @@ config ARCH_SOCFPGA
        bool "Altera SOCFPGA family"
        select ARCH_EARLY_INIT_R
        select ARCH_MISC_INIT if !TARGET_SOCFPGA_ARRIA10
-       select ARM64 if TARGET_SOCFPGA_STRATIX10
+       select ARM64 if TARGET_SOCFPGA_STRATIX10 || TARGET_SOCFPGA_AGILEX
        select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
        select DM
        select DM_SERIAL
@@ -919,7 +944,7 @@ config ARCH_SOCFPGA
        select SPL_LIBGENERIC_SUPPORT
        select SPL_NAND_SUPPORT if SPL_NAND_DENALI
        select SPL_OF_CONTROL
-       select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10
+       select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10 || TARGET_SOCFPGA_AGILEX
        select SPL_SERIAL_SUPPORT
        select SPL_SYSRESET
        select SPL_WATCHDOG_SUPPORT
@@ -990,6 +1015,24 @@ config ARCH_SUNXI
        imply SPL_SERIAL_SUPPORT
        imply USB_GADGET
 
+config ARCH_U8500
+       bool "ST-Ericsson U8500 Series"
+       select CPU_V7A
+       select DM
+       select DM_GPIO
+       select DM_MMC if MMC
+       select DM_SERIAL
+       select DM_USB if USB
+       select OF_CONTROL
+       select SYSRESET
+       select TIMER
+       imply ARM_PL180_MMCI
+       imply DM_RTC
+       imply NOMADIK_MTU_TIMER
+       imply PL01X_SERIAL
+       imply RTC_PL031
+       imply SYSRESET_SYSCON
+
 config ARCH_VERSAL
        bool "Support Xilinx Versal Platform"
        select ARM64
@@ -1098,7 +1141,6 @@ config TARGET_VEXPRESS64_JUNO
 config TARGET_LS2080A_EMU
        bool "Support ls2080a_emu"
        select ARCH_LS2080A
-       select ARCH_MISC_INIT
        select ARM64
        select ARMV8_MULTIENTRY
        select FSL_DDR_SYNC_REFRESH
@@ -1111,7 +1153,6 @@ config TARGET_LS2080A_EMU
 config TARGET_LS2080A_SIMU
        bool "Support ls2080a_simu"
        select ARCH_LS2080A
-       select ARCH_MISC_INIT
        select ARM64
        select ARMV8_MULTIENTRY
        select BOARD_LATE_INIT
@@ -1124,7 +1165,6 @@ config TARGET_LS2080A_SIMU
 config TARGET_LS1088AQDS
        bool "Support ls1088aqds"
        select ARCH_LS1088A
-       select ARCH_MISC_INIT
        select ARM64
        select ARMV8_MULTIENTRY
        select ARCH_SUPPORT_TFABOOT
@@ -1140,7 +1180,6 @@ config TARGET_LS1088AQDS
 config TARGET_LS2080AQDS
        bool "Support ls2080aqds"
        select ARCH_LS2080A
-       select ARCH_MISC_INIT
        select ARM64
        select ARMV8_MULTIENTRY
        select ARCH_SUPPORT_TFABOOT
@@ -1159,7 +1198,6 @@ config TARGET_LS2080AQDS
 config TARGET_LS2080ARDB
        bool "Support ls2080ardb"
        select ARCH_LS2080A
-       select ARCH_MISC_INIT
        select ARM64
        select ARMV8_MULTIENTRY
        select ARCH_SUPPORT_TFABOOT
@@ -1178,7 +1216,6 @@ config TARGET_LS2080ARDB
 config TARGET_LS2081ARDB
        bool "Support ls2081ardb"
        select ARCH_LS2080A
-       select ARCH_MISC_INIT
        select ARM64
        select ARMV8_MULTIENTRY
        select BOARD_LATE_INIT
@@ -1192,7 +1229,6 @@ config TARGET_LS2081ARDB
 config TARGET_LX2160ARDB
        bool "Support lx2160ardb"
        select ARCH_LX2160A
-       select ARCH_MISC_INIT
        select ARM64
        select ARMV8_MULTIENTRY
        select ARCH_SUPPORT_TFABOOT
@@ -1206,7 +1242,6 @@ config TARGET_LX2160ARDB
 config TARGET_LX2160AQDS
        bool "Support lx2160aqds"
        select ARCH_LX2160A
-       select ARCH_MISC_INIT
        select ARM64
        select ARMV8_MULTIENTRY
        select ARCH_SUPPORT_TFABOOT
@@ -1329,7 +1364,6 @@ config TARGET_LS1028AQDS
        select ARMV8_MULTIENTRY
        select ARCH_SUPPORT_TFABOOT
        select BOARD_LATE_INIT
-       select ARCH_MISC_INIT
        help
          Support for Freescale LS1028AQDS platform
          The LS1028A Development System (QDS) is a high-performance
@@ -1351,7 +1385,6 @@ config TARGET_LS1028ARDB
 config TARGET_LS1088ARDB
        bool "Support ls1088ardb"
        select ARCH_LS1088A
-       select ARCH_MISC_INIT
        select ARM64
        select ARMV8_MULTIENTRY
        select ARCH_SUPPORT_TFABOOT
@@ -1515,6 +1548,7 @@ config ARCH_UNIPHIER
        select DM_GPIO
        select DM_I2C
        select DM_MMC
+       select DM_MTD
        select DM_RESET
        select DM_SERIAL
        select DM_USB
@@ -1592,6 +1626,7 @@ config ARCH_STM32MP
 config ARCH_ROCKCHIP
        bool "Support Rockchip SoCs"
        select BLK
+       select BINMAN if !ARM64
        select DM
        select DM_GPIO
        select DM_I2C
@@ -1640,6 +1675,10 @@ config TARGET_DURIAN
          Support for durian platform.
          It has 2GB Sdram, uart and pcie.
 
+config TARGET_PRESIDIO_ASIC
+       bool "Support Cortina Presidio ASIC Platform"
+       select ARM64
+
 endchoice
 
 config ARCH_SUPPORT_TFABOOT
@@ -1722,6 +1761,8 @@ source "arch/arm/mach-imx/imx8/Kconfig"
 
 source "arch/arm/mach-imx/imx8m/Kconfig"
 
+source "arch/arm/mach-imx/imxrt/Kconfig"
+
 source "arch/arm/mach-imx/mxs/Kconfig"
 
 source "arch/arm/mach-omap2/Kconfig"
@@ -1758,6 +1799,8 @@ source "arch/arm/mach-sunxi/Kconfig"
 
 source "arch/arm/mach-tegra/Kconfig"
 
+source "arch/arm/mach-u8500/Kconfig"
+
 source "arch/arm/mach-uniphier/Kconfig"
 
 source "arch/arm/cpu/armv7/vf610/Kconfig"
@@ -1784,9 +1827,11 @@ source "board/Marvell/gplugd/Kconfig"
 source "board/armadeus/apf27/Kconfig"
 source "board/armltd/vexpress/Kconfig"
 source "board/armltd/vexpress64/Kconfig"
+source "board/cortina/presidio-asic/Kconfig"
 source "board/broadcom/bcm23550_w1d/Kconfig"
 source "board/broadcom/bcm28155_ap/Kconfig"
 source "board/broadcom/bcm963158/Kconfig"
+source "board/broadcom/bcm968360bg/Kconfig"
 source "board/broadcom/bcm968580xref/Kconfig"
 source "board/broadcom/bcmcygnus/Kconfig"
 source "board/broadcom/bcmnsp/Kconfig"