ARM_SOC_BOOT0_HOOK which contains the required assembler
preprocessor code.
+config USE_ARCH_MEMCPY
+ bool "Use an assembly optimized implementation of memcpy"
+ default y if CPU_V7
+ depends on !ARM64
+ help
+ Enable the generation of an optimized version of memcpy.
+ Such implementation may be faster under some conditions
+ but may increase the binary size.
+
+config USE_ARCH_MEMSET
+ bool "Use an assembly optimized implementation of memset"
+ default y if CPU_V7
+ depends on !ARM64
+ help
+ Enable the generation of an optimized version of memset.
+ Such implementation may be faster under some conditions
+ but may increase the binary size.
+
+config ARCH_OMAP2
+ bool
+ select CPU_V7
+ select SUPPORT_SPL
+
+config ARM64_SUPPORT_AARCH32
+ bool "ARM64 system support AArch32 execution state"
+ default y if ARM64 && !TARGET_THUNDERX_88XX
+ help
+ This ARM64 system supports AArch32 execution state.
+
choice
prompt "Target select"
default TARGET_HIKEY
bool "Support edb93xx"
select CPU_ARM920T
-config TARGET_VCMA9
- bool "Support VCMA9"
- select CPU_ARM920T
-
-config TARGET_SMDK2410
- bool "Support smdk2410"
- select CPU_ARM920T
-
config TARGET_ASPENITE
bool "Support aspenite"
select CPU_ARM926EJS
select CPU_ARM926EJS
config ARCH_MVEBU
- bool "Marvell MVEBU family (Armada XP/375/38x)"
- select CPU_V7
- select SUPPORT_SPL
+ bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
select OF_CONTROL
select OF_SEPARATE
select DM
select DM_SERIAL
select DM_SPI
select DM_SPI_FLASH
- select SPL_DM
- select SPL_DM_SEQ_ALIAS
- select SPL_OF_CONTROL
- select SPL_SIMPLE_BUS
config TARGET_DEVKIT3250
bool "Support devkit3250"
select DM
select DM_SERIAL
select DM_GPIO
+ select OF_CONTROL
config TARGET_VEXPRESS_CA15_TC2
bool "Support vexpress_ca15_tc2"
config TARGET_BRXRE1
bool "Support BRXRE1"
- select CPU_V7
- select SUPPORT_SPL
+ select ARCH_OMAP2
config TARGET_BRPPT1
bool "Support BRPPT1"
- select CPU_V7
- select SUPPORT_SPL
-
-config TARGET_CM_T335
- bool "Support cm_t335"
- select CPU_V7
- select SUPPORT_SPL
- select DM
- select DM_SERIAL
- select DM_GPIO
-
-config TARGET_PEPPER
- bool "Support pepper"
- select CPU_V7
- select SUPPORT_SPL
- select DM
- select DM_SERIAL
- select DM_GPIO
-
-config TARGET_AM335X_IGEP0033
- bool "Support am335x_igep0033"
- select CPU_V7
- select SUPPORT_SPL
- select DM
- select DM_SERIAL
- select DM_GPIO
-
-config TARGET_PCM051
- bool "Support pcm051"
- select CPU_V7
- select SUPPORT_SPL
- select DM
- select DM_SERIAL
- select DM_GPIO
+ select ARCH_OMAP2
config TARGET_DRACO
bool "Support draco"
- select CPU_V7
- select SUPPORT_SPL
+ select ARCH_OMAP2
select DM
select DM_SERIAL
select DM_GPIO
config TARGET_THUBAN
bool "Support thuban"
- select CPU_V7
- select SUPPORT_SPL
+ select ARCH_OMAP2
select DM
select DM_SERIAL
select DM_GPIO
config TARGET_RASTABAN
bool "Support rastaban"
- select CPU_V7
- select SUPPORT_SPL
+ select ARCH_OMAP2
select DM
select DM_SERIAL
select DM_GPIO
config TARGET_ETAMIN
bool "Support etamin"
- select CPU_V7
- select SUPPORT_SPL
+ select ARCH_OMAP2
select DM
select DM_SERIAL
select DM_GPIO
config TARGET_PXM2
bool "Support pxm2"
- select CPU_V7
- select SUPPORT_SPL
+ select ARCH_OMAP2
select DM
select DM_SERIAL
select DM_GPIO
config TARGET_RUT
bool "Support rut"
- select CPU_V7
- select SUPPORT_SPL
- select DM
- select DM_SERIAL
- select DM_GPIO
-
-config TARGET_PENGWYN
- bool "Support pengwyn"
- select CPU_V7
- select SUPPORT_SPL
- select DM
- select DM_SERIAL
- select DM_GPIO
-
-config TARGET_AM335X_BALTOS
- bool "Support am335x_baltos"
- select CPU_V7
- select SUPPORT_SPL
- select DM
- select DM_SERIAL
- select DM_GPIO
-
-config TARGET_AM335X_EVM
- bool "Support am335x_evm"
- select CPU_V7
- select SUPPORT_SPL
- select DM
- select DM_SERIAL
- select DM_GPIO
- select TI_I2C_BOARD_DETECT
-
-config TARGET_AM335X_SHC
- bool "Support am335x based shc board from bosch"
- select CPU_V7
- select SUPPORT_SPL
+ select ARCH_OMAP2
select DM
select DM_SERIAL
select DM_GPIO
-config TARGET_AM335X_SL50
- bool "Support am335x_sl50"
- select CPU_V7
- select SUPPORT_SPL
- select DM
- select DM_GPIO
- select DM_SERIAL
-
-config TARGET_BAV335X
- bool "Support bav335x"
- select CPU_V7
- select SUPPORT_SPL
- select DM
- select DM_SERIAL
- help
- The BAV335x OEM Network Processor integrates all the functions of an
- embedded network computer in a small, easy to use SODIMM module which
- incorporates the popular Texas Instruments Sitara 32bit ARM Coretex-A8
- processor, with fast DDR3 512MB SDRAM, 4GB of embedded MMC and a Gigabit
- ethernet with simple connection to external connectors.
-
- For more information, visit: http://birdland.com/oem
-
config TARGET_TI814X_EVM
bool "Support ti814x_evm"
- select CPU_V7
- select SUPPORT_SPL
+ select ARCH_OMAP2
config TARGET_TI816X_EVM
bool "Support ti816x_evm"
- select CPU_V7
- select SUPPORT_SPL
+ select ARCH_OMAP2
config TARGET_BCM23550_W1D
bool "Support bcm23550_w1d"
config ARCH_EXYNOS
bool "Samsung EXYNOS"
select DM
+ select DM_I2C
select DM_SPI_FLASH
select DM_SERIAL
select DM_SPI
select DM
select DM_SERIAL
select DM_GPIO
+ select DM_I2C
config ARCH_HIGHBANK
bool "Calxeda Highbank"
config ARCH_MX7
bool "Freescale MX7"
select CPU_V7
+ select SYS_FSL_HAS_SEC if SECURE_BOOT
+ select SYS_FSL_SEC_COMPAT_4
+ select SYS_FSL_SEC_LE
config ARCH_MX6
bool "Freescale MX6"
select CPU_V7
+ select SYS_FSL_HAS_SEC if SECURE_BOOT
+ select SYS_FSL_SEC_COMPAT_4
+ select SYS_FSL_SEC_LE
config ARCH_MX5
bool "Freescale MX5"
config OMAP34XX
bool "OMAP34XX SoC"
- select CPU_V7
- select SUPPORT_SPL
+ select ARCH_OMAP2
select USE_TINY_PRINTF
config OMAP44XX
bool "OMAP44XX SoC"
- select CPU_V7
- select SUPPORT_SPL
+ select ARCH_OMAP2
select USE_TINY_PRINTF
config OMAP54XX
bool "OMAP54XX SoC"
- select CPU_V7
- select SUPPORT_SPL
+ select ARCH_OMAP2
config AM43XX
bool "AM43XX SoC"
- select CPU_V7
- select SUPPORT_SPL
+ select ARCH_OMAP2
help
Support for AM43xx SOC from Texas Instruments.
The AM43xx high performance SOC features a Cortex-A9
protocols, dual camera support, optional 3D graphics
and an optional customer programmable secure boot.
+config AM33XX
+ bool "AM33XX SoC"
+ select ARCH_OMAP2
+ help
+ Support for AM335x SOC from Texas Instruments.
+ The AM335x high performance SOC features a Cortex-A8
+ ARM core, a dual core PRU-ICSS for industrial Ethernet
+ protocols, optional 3D graphics and an optional customer
+ programmable secure boot.
+
config ARCH_RMOBILE
bool "Renesas ARM SoCs"
select DM
config TARGET_S32V234EVB
bool "Support s32v234evb"
select ARM64
+ select SYS_FSL_ERRATUM_ESDHC111
config ARCH_SNAPDRAGON
bool "Qualcomm Snapdragon SoCs"
select DM
select DM_SPI_FLASH
select DM_SPI
+ select ENABLE_ARM_SOC_BOOT0_HOOK
config TARGET_CM_T43
bool "Support cm_t43"
- select CPU_V7
- select SUPPORT_SPL
+ select ARCH_OMAP2
config ARCH_SUNXI
bool "Support sunxi (Allwinner) SoCs"
select CMD_GPIO
select CMD_MMC if MMC
- select CMD_USB
+ select CMD_USB if DISTRO_DEFAULTS
select DM
select DM_ETH
select DM_GPIO
select DM_KEYBOARD
select DM_SERIAL
- select DM_USB
+ select DM_USB if DISTRO_DEFAULTS
select OF_BOARD_SETUP
select OF_CONTROL
select OF_SEPARATE
select SPL_STACK_R if SUPPORT_SPL
select SPL_SYS_MALLOC_SIMPLE if SUPPORT_SPL
select SYS_NS16550
- select USB
- select USB_STORAGE
- select USB_KEYBOARD
+ select USB if DISTRO_DEFAULTS
+ select USB_STORAGE if DISTRO_DEFAULTS
+ select USB_KEYBOARD if DISTRO_DEFAULTS
select USE_TINY_PRINTF
+config TARGET_TS4600
+ bool "Support TS4600"
+ select CPU_ARM926EJS
+ select SUPPORT_SPL
+
config TARGET_TS4800
bool "Support TS4800"
select CPU_V7
+ select SYS_FSL_ERRATUM_ESDHC_A001
config TARGET_VF610TWR
bool "Support vf610twr"
select CPU_V7
+ select SYS_FSL_ERRATUM_ESDHC111
config TARGET_COLIBRI_VF
bool "Support Colibri VF50/61"
select CPU_V7
+ select SYS_FSL_ERRATUM_ESDHC111
config TARGET_PCM052
bool "Support pcm-052"
select CPU_V7
+ select SYS_FSL_ERRATUM_ESDHC111
+ select SYS_FSL_ERRATUM_ESDHC135
+ select SYS_FSL_ERRATUM_ESDHC_A001
+
+config TARGET_BK4R1
+ bool "Support BK4r1"
+ select CPU_V7
+ select SYS_FSL_ERRATUM_ESDHC111
+ select SYS_FSL_ERRATUM_ESDHC135
+ select SYS_FSL_ERRATUM_ESDHC_A001
config ARCH_ZYNQ
bool "Xilinx Zynq Platform"
config TARGET_LS2080A_EMU
bool "Support ls2080a_emu"
+ select ARCH_LS2080A
select ARM64
select ARMV8_MULTIENTRY
help
config TARGET_LS2080A_SIMU
bool "Support ls2080a_simu"
+ select ARCH_LS2080A
select ARM64
select ARMV8_MULTIENTRY
help
config TARGET_LS2080AQDS
bool "Support ls2080aqds"
+ select ARCH_LS2080A
select ARM64
select ARMV8_MULTIENTRY
select SUPPORT_SPL
config TARGET_LS2080ARDB
bool "Support ls2080ardb"
+ select ARCH_LS2080A
select ARM64
select ARMV8_MULTIENTRY
select SUPPORT_SPL
config TARGET_LS1012AQDS
bool "Support ls1012aqds"
+ select ARCH_LS1012A
select ARM64
help
Support for Freescale LS1012AQDS platform.
config TARGET_LS1012ARDB
bool "Support ls1012ardb"
+ select ARCH_LS1012A
select ARM64
help
Support for Freescale LS1012ARDB platform.
config TARGET_LS1012AFRDM
bool "Support ls1012afrdm"
+ select ARCH_LS1012A
select ARM64
help
Support for Freescale LS1012AFRDM platform.
config TARGET_LS1021AQDS
bool "Support ls1021aqds"
select CPU_V7
+ select CPU_V7_HAS_NONSEC
+ select CPU_V7_HAS_VIRT
select SUPPORT_SPL
+ select ARCH_LS1021A
select ARCH_SUPPORT_PSCI
+ select LS1_DEEP_SLEEP
+ select SYS_FSL_DDR
config TARGET_LS1021ATWR
bool "Support ls1021atwr"
select CPU_V7
+ select CPU_V7_HAS_NONSEC
+ select CPU_V7_HAS_VIRT
+ select SUPPORT_SPL
+ select ARCH_LS1021A
+ select ARCH_SUPPORT_PSCI
+ select LS1_DEEP_SLEEP
+
+config TARGET_LS1021AIOT
+ bool "Support ls1021aiot"
+ select CPU_V7
+ select CPU_V7_HAS_NONSEC
+ select CPU_V7_HAS_VIRT
select SUPPORT_SPL
+ select ARCH_LS1021A
select ARCH_SUPPORT_PSCI
+ help
+ Support for Freescale LS1021AIOT platform.
+ The LS1021A Freescale board (IOT) is a high-performance
+ development platform that supports the QorIQ LS1021A
+ Layerscape Architecture processor.
config TARGET_LS1043AQDS
bool "Support ls1043aqds"
+ select ARCH_LS1043A
select ARM64
select ARMV8_MULTIENTRY
select SUPPORT_SPL
config TARGET_LS1043ARDB
bool "Support ls1043ardb"
+ select ARCH_LS1043A
select ARM64
select ARMV8_MULTIENTRY
select SUPPORT_SPL
help
Support for Freescale LS1043ARDB platform.
+config TARGET_LS1046AQDS
+ bool "Support ls1046aqds"
+ select ARCH_LS1046A
+ select ARM64
+ select ARMV8_MULTIENTRY
+ select SUPPORT_SPL
+ select DM_SPI_FLASH if DM_SPI
+ help
+ Support for Freescale LS1046AQDS platform.
+ The LS1046A Development System (QDS) is a high-performance
+ development platform that supports the QorIQ LS1046A
+ Layerscape Architecture processor.
+
config TARGET_LS1046ARDB
bool "Support ls1046ardb"
+ select ARCH_LS1046A
select ARM64
select ARMV8_MULTIENTRY
select SUPPORT_SPL
select DM_SPI_FLASH if DM_SPI
+ select POWER_MC34VR500
help
Support for Freescale LS1046ARDB platform.
The LS1046A Reference Design Board (RDB) is a high-performance
config ARCH_UNIPHIER
bool "Socionext UniPhier SoCs"
select CLK_UNIPHIER
- select SUPPORT_SPL
- select SPL
- select OF_CONTROL
- select SPL_OF_CONTROL
- select OF_LIBFDT
select DM
- select SPL_DM
select DM_GPIO
- select DM_SERIAL
select DM_I2C
select DM_MMC
+ select DM_RESET
+ select DM_SERIAL
+ select DM_USB
+ select OF_CONTROL
+ select OF_LIBFDT
+ select PINCTRL
+ select SPL
+ select SPL_DM
+ select SPL_LIBCOMMON_SUPPORT
+ select SPL_LIBGENERIC_SUPPORT
+ select SPL_OF_CONTROL
+ select SPL_PINCTRL
+ select SUPPORT_SPL
help
Support for UniPhier SoC family developed by Socionext Inc.
(formerly, System LSI Business Division of Panasonic Corporation)
select DM_SERIAL
select DM_SPI
select DM_SPI_FLASH
+ select DM_USB if USB
+ select DM_PWM
+ select DM_REGULATOR
config TARGET_THUNDERX_88XX
bool "Support ThunderX 88xx"
source "arch/arm/mach-kirkwood/Kconfig"
+source "arch/arm/mach-litesom/Kconfig"
+
source "arch/arm/mach-mvebu/Kconfig"
+source "arch/arm/cpu/armv7/ls102xa/Kconfig"
+
source "arch/arm/cpu/armv7/mx7/Kconfig"
source "arch/arm/cpu/armv7/mx6/Kconfig"
source "arch/arm/cpu/armv7/mx5/Kconfig"
-source "arch/arm/cpu/armv7/omap-common/Kconfig"
+source "arch/arm/mach-omap2/Kconfig"
+
+source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
source "arch/arm/mach-orion5x/Kconfig"
source "board/freescale/ls1021aqds/Kconfig"
source "board/freescale/ls1043aqds/Kconfig"
source "board/freescale/ls1021atwr/Kconfig"
+source "board/freescale/ls1021aiot/Kconfig"
+source "board/freescale/ls1046aqds/Kconfig"
source "board/freescale/ls1043ardb/Kconfig"
source "board/freescale/ls1046ardb/Kconfig"
source "board/freescale/ls1012aqds/Kconfig"
source "board/hisilicon/hikey/Kconfig"
source "board/imx31_phycore/Kconfig"
source "board/isee/igep0033/Kconfig"
-source "board/mpl/vcma9/Kconfig"
source "board/olimex/mx23_olinuxino/Kconfig"
source "board/phytec/pcm051/Kconfig"
source "board/phytec/pcm052/Kconfig"
source "board/ppcag/bg0900/Kconfig"
-source "board/samsung/smdk2410/Kconfig"
source "board/sandisk/sansa_fuze_plus/Kconfig"
source "board/schulercontrol/sc_sps_1/Kconfig"
source "board/siemens/draco/Kconfig"
source "board/timll/devkit3250/Kconfig"
source "board/toradex/colibri_pxa270/Kconfig"
source "board/toradex/colibri_vf/Kconfig"
+source "board/technologic/ts4600/Kconfig"
source "board/technologic/ts4800/Kconfig"
source "board/vscom/baltos/Kconfig"
source "board/woodburn/Kconfig"