--- Copyright 2017-2018 Dirk Brenken (dev@brenken.org)
+-- Copyright 2017-2019 Dirk Brenken (dev@brenken.org)
-- This is free software, licensed under the Apache License, Version 2.0
local fs = require("nixio.fs")
m:chain("network")
m:chain("firewall")
-function m.on_apply(self)
- luci.sys.call("env -i /etc/init.d/travelmate restart >/dev/null 2>&1")
-end
-
-- Interface Wizard
if uplink == "" then
s = m:section(NamedSection, "global", "travelmate")
-o1 = s:option(Flag, "trm_enabled", translate("Enable travelmate"))
+o1 = s:option(Flag, "trm_enabled", translate("Enable Travelmate"))
o1.default = o1.disabled
o1.rmempty = false
o2.default = o2.enabled
o2.rmempty = false
-o3 = s:option(ListValue, "trm_iface", translate("Uplink / Trigger interface"),
+o3 = s:option(Flag, "trm_netcheck", translate("Net Error Check"),
+ translate("Treat missing internet availability as an error."))
+o3:depends("trm_captive", 1)
+o3.default = o3.disabled
+o3.rmempty = false
+
+o4 = s:option(Flag, "trm_proactive", translate("ProActive Uplink Switch"),
+ translate("Proactively scan and switch to a higher prioritized uplink, despite of an already existing connection."))
+o4.default = o4.enabled
+o4.rmempty = false
+
+o5 = s:option(Flag, "trm_autoadd", translate("Add Open Uplinks"),
+ translate("Automatically add open uplinks like hotel captive portals to your wireless config."))
+o5.default = o5.disabled
+o5.rmempty = false
+
+o6 = s:option(ListValue, "trm_iface", translate("Uplink / Trigger interface"),
translate("Name of the used uplink interface."))
if dump then
local i, v
for i, v in ipairs(dump.interface) do
if v.interface ~= "loopback" and v.interface ~= "lan" then
- o3:value(v.interface)
+ local device = v.l3_device or v.device or "-"
+ o6:value(v.interface, v.interface.. " (" ..device.. ")")
end
end
end
-o3.default = trmiface
-o3.rmempty = false
-
-if fs.access("/usr/bin/qrencode") then
- btn = s:option(Button, "btn", translate("View AP QR-Codes"),
- translate("Connect your Android or iOS devices to your router's WiFi using the shown QR code."))
- btn.inputtitle = translate("QR-Codes")
- btn.inputstyle = "apply"
- btn.disabled = false
-
- function btn.write()
- luci.http.redirect(luci.dispatcher.build_url("admin", "services", "travelmate", "apqr"))
- end
-end
+o6.default = trmiface
+o6.rmempty = false
-- Runtime information
-- Extra options
-e = m:section(NamedSection, "global", "travelmate", translate("Extra options"),
+e = m:section(NamedSection, "global", "travelmate", translate("Extra Options"),
translate("Options for further tweaking in case the defaults are not suitable for you."))
-e1 = e:option(Flag, "trm_debug", translate("Enable verbose debug logging"))
+e1 = e:option(Flag, "trm_debug", translate("Enable Verbose Debug Logging"))
e1.default = e1.disabled
e1.rmempty = false
-e2 = e:option(Value, "trm_radio", translate("Radio selection"),
- translate("Restrict travelmate to a dedicated radio, e.g. 'radio0'."))
-e2.datatype = "and(uciname,rangelength(6,6))"
+e2 = e:option(Value, "trm_radio", translate("Radio Selection / Order"),
+ translate("Restrict travelmate to a single radio (e.g. 'radio1') or change the overall scanning order (e.g. 'radio1 radio2 radio0')."))
e2.rmempty = true
-e3 = e:option(Value, "trm_triggerdelay", translate("Trigger Delay"),
- translate("Additional trigger delay in seconds before travelmate processing begins."))
-e3.datatype = "range(1,60)"
-e3.default = 2
+e3 = e:option(Value, "trm_listexpiry", translate("List Auto Expiry"),
+ translate("Automatically resets the 'Faulty Stations' list after n minutes. Default is '0' which means no expiry."))
+e3.datatype = "range(0,300)"
+e3.default = 0
e3.rmempty = false
-e4 = e:option(Value, "trm_maxretry", translate("Connection Limit"),
- translate("Retry limit to connect to an uplink."))
-e4.default = 3
-e4.datatype = "range(1,10)"
+e4 = e:option(Value, "trm_triggerdelay", translate("Trigger Delay"),
+ translate("Additional trigger delay in seconds before travelmate processing begins."))
+e4.datatype = "range(1,60)"
+e4.default = 2
e4.rmempty = false
-e5 = e:option(Value, "trm_minquality", translate("Signal Quality Threshold"),
- translate("Minimum signal quality threshold as percent for conditional uplink (dis-) connections."))
-e5.default = 35
-e5.datatype = "range(20,80)"
+e5 = e:option(Value, "trm_maxretry", translate("Connection Limit"),
+ translate("Retry limit to connect to an uplink."))
+e5.default = 5
+e5.datatype = "range(1,10)"
e5.rmempty = false
-e6 = e:option(Value, "trm_maxwait", translate("Interface Timeout"),
- translate("How long should travelmate wait for a successful wlan uplink connection."))
-e6.default = 30
-e6.datatype = "range(20,40)"
+e6 = e:option(Value, "trm_minquality", translate("Signal Quality Threshold"),
+ translate("Minimum signal quality threshold as percent for conditional uplink (dis-) connections."))
+e6.default = 35
+e6.datatype = "range(20,80)"
e6.rmempty = false
-e7 = e:option(Value, "trm_timeout", translate("Overall Timeout"),
- translate("Overall retry timeout in seconds."))
-e7.default = 60
-e7.datatype = "range(30,300)"
+e7 = e:option(Value, "trm_maxwait", translate("Interface Timeout"),
+ translate("How long should travelmate wait for a successful wlan uplink connection."))
+e7.default = 30
+e7.datatype = "range(20,40)"
e7.rmempty = false
+e8 = e:option(Value, "trm_timeout", translate("Overall Timeout"),
+ translate("Overall retry timeout in seconds."))
+e8.default = 60
+e8.datatype = "range(30,300)"
+e8.rmempty = false
+
+e10 = e:option(Value, "trm_scanbuffer", translate("Scan Buffer Size"),
+ translate("Buffer size in bytes to prepare nearby scan results."))
+e10.default = 1024
+e10.datatype = "range(512,4096)"
+e10.optional = true
+
return m