+#
+# Yangfl <mmyangfl@gmail.com>, 2017, 2018.
+#
msgid ""
msgstr ""
-"Project-Id-Version: \n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-02 13:44+0100\n"
-"PO-Revision-Date: 2015-04-23 13:00+0800\n"
-"Last-Translator: Syrone Wong <wong.syrone@gmail.com>\n"
+"Project-Id-Version: luci-app-ddns 2.4.0-1\n"
+"POT-Creation-Date: 2016-01-30 11:07+0100\n"
+"PO-Revision-Date: 2018-08-08 08:38+0800\n"
+"Last-Translator: Yangfl <mmyangfl@gmail.com>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Poedit 1.7.5\n"
+"X-Generator: Gtranslator 2.91.7\n"
+"Language-Team: <debian-l10n-chinese@lists.debian.org>\n"
+
+msgid "&"
+msgstr "&"
msgid "-- custom --"
msgstr "-- 自定义 --"
msgstr "高级设置"
msgid "Allow non-public IP's"
-msgstr "允许非公网IP"
+msgstr "允许非公网 IP"
msgid "Applying changes"
msgstr "正在应用更改"
msgid "Basic Settings"
msgstr "基础设置"
-msgid "Below a list of configuration tips for your system to run Dynamic DNS updates without limitations"
-msgstr "以下是一个能够让你的系统不受限制地进行动态DNS更新的设置贴士."
+msgid ""
+"Below a list of configuration tips for your system to run Dynamic DNS "
+"updates without limitations"
+msgstr "以下是一个能够让您的系统不受限制地进行动态 DNS 更新设置的提示列表"
-msgid "Below is a list of configured DDNS configurations and their current state."
-msgstr "一下是当前已经配置好的DDNS设置项列表以及它们的当前状态."
+msgid ""
+"Below is a list of configured DDNS configurations and their current state."
+msgstr "以下是当前已经配置好的 DDNS 设置项列表以及它们的当前状态。"
msgid "Bind Network"
msgstr "使用的接口"
msgid "Binding to a specific network not supported"
msgstr "不支持绑定到一个指定的网络"
-msgid "BusyBox's nslookup and Wget do not support to specify the IP version to use for communication with DDNS Provider."
-msgstr "与DDNS供应商通讯时BusyBox的nslookup和Wget不支持设置特定的IP协议版本."
+msgid ""
+"BusyBox's nslookup and Wget do not support to specify the IP version to use "
+"for communication with DDNS Provider!"
+msgstr ""
+"与 DDNS 供应商通讯时,BusyBox 的 nslookup 和 Wget 不支持设置特定的 IP 协议版"
+"本。"
-msgid "BusyBox's nslookup does not support to specify to use TCP instead of default UDP when requesting DNS server"
-msgstr "BusyBox的nslookup不支持使用TCP协议代替UDP协议请求DNS记录"
+msgid ""
+"BusyBox's nslookup and hostip do not support to specify to use TCP instead "
+"of default UDP when requesting DNS server!"
+msgstr ""
+"向 DNS 服务器查询时,BusyBox 的 nslookup 和 hostip 不支持使用 TCP 而不是默认"
+"的 UDP!"
+
+msgid ""
+"BusyBox's nslookup in the current compiled version does not handle given DNS "
+"Servers correctly!"
+msgstr "当前编译版本中 BusyBox 的 nslookup 在处理给定的 DNS 服务器不正确!"
msgid "Casual users should not change this setting"
msgstr "普通用户不应该改变这个设置"
+msgid "Change provider"
+msgstr "更改提供者"
+
msgid "Check Interval"
msgstr "检查时间周期"
msgid "Collecting data..."
-msgstr "正在收集数据..."
+msgstr "正在收集数据…"
msgid "Config error"
msgstr "配置错误"
msgid "Configuration"
msgstr "设置"
-msgid "Configure here the details for all Dynamic DNS services including this LuCI application."
-msgstr "在这里修改动态DNS服务的详细配置"
+msgid ""
+"Configure here the details for all Dynamic DNS services including this LuCI "
+"application."
+msgstr "在这里修改动态 DNS 服务的详细配置。"
msgid "Configure here the details for selected Dynamic DNS service."
-msgstr "在这里修改选择的DDNS服务的详细配置"
+msgstr "在这里修改选择的 DDNS 服务的详细配置。"
msgid "Current setting"
msgstr "当前设置"
-msgid "Currently DDNS updates are not started at boot or on interface events.<br />This is the default if you run DDNS scripts by yourself (i.e. via cron with force_interval set to '0')"
-msgstr "现在,DDNS更新在开机或者接口动作时不会被触发<br />如果你手工运行DDNS脚本的话(例如使用cron时把force_interval设置为0),这是默认设置."
+msgid ""
+"Currently DDNS updates are not started at boot or on interface events.<br /"
+">This is the default if you run DDNS scripts by yourself (i.e. via cron with "
+"force_interval set to '0')"
+msgstr ""
+"现在,DDNS 更新在开机或者接口动作时不会被触发。<br />如果您手工运行 DDNS 脚本"
+"的话(例如使用 cron 时把 force_interval 设置为 0),这是默认设置。"
-msgid "Currently DDNS updates are not started at boot or on interface events.<br />You can start/stop each configuration here. It will run until next reboot."
-msgstr "现在,DDNS更新在开机或者接口动作时不会被触发<br />你可以在这里开始/停止每一个设置的条目.它在下次重启之前一直有效."
+msgid ""
+"Currently DDNS updates are not started at boot or on interface events.<br /"
+">You can start/stop each configuration here. It will run until next reboot."
+msgstr ""
+"现在,DDNS 更新在开机或者接口动作时不会被触发。<br />您可以在这里开始/停止每"
+"一个设置的条目。它在下次重启之前一直有效。"
msgid "Custom update script to be used for updating your DDNS Provider."
-msgstr "用来更新动态DNS的自定义脚本"
+msgstr "用来更新动态 DNS 的自定义脚本。"
msgid "Custom update-URL"
-msgstr "自定义更新URL"
+msgstr "自定义更新 URL"
msgid "Custom update-script"
msgstr "自定义更新脚本"
msgid "DDNS Autostart disabled"
-msgstr "DDNS自动启动已禁用."
+msgstr "DDNS 自动启动已禁用。"
+
+msgid "DDNS Client Configuration"
+msgstr "DDNS 客户端配置"
+
+msgid "DDNS Client Documentation"
+msgstr "DDNS 客户端文档"
msgid "DDNS Service provider"
-msgstr "DDNS服务提供商"
+msgstr "DDNS 服务提供商"
msgid "DNS requests via TCP not supported"
-msgstr "不支持使用TCP进行DNS解析"
+msgstr "不支持使用 TCP 进行 DNS 解析"
msgid "DNS-Server"
-msgstr "DNS服务器"
+msgstr "DNS-服务器"
msgid "Date format"
msgstr "日期格式"
msgid "Defines the Web page to read systems IPv4-Address from"
-msgstr "设定用来读取系统IPv4地址的网页"
+msgstr "设定用来读取系统 IPv4 地址的网页"
msgid "Defines the Web page to read systems IPv6-Address from"
-msgstr "设定用来读取系统IPv6地址的网页"
+msgstr "设定用来读取系统 IPv6 地址的网页"
msgid "Defines the interface to read systems IP-Address from"
-msgstr "设定用来读取系统IP地址的接口"
+msgstr "设定用来读取系统 IP 地址的接口"
msgid "Defines the network to read systems IPv4-Address from"
-msgstr "设定用来读取系统IPv4地址的网络"
+msgstr "设定用来读取系统 IPv4 地址的网络"
msgid "Defines the network to read systems IPv6-Address from"
-msgstr "设定用来读取系统IPv6地址的网络"
+msgstr "设定用来读取系统 IPv6 地址的网络"
-msgid "Defines the source to read systems IPv4-Address from, that will be send to the DDNS provider"
-msgstr "设定IPv4地址的来源.这将会被发送给DDNS提供商"
+msgid ""
+"Defines the source to read systems IPv4-Address from, that will be send to "
+"the DDNS provider"
+msgstr "设定 IPv4 地址的来源。这将会被发送给 DDNS 提供商"
-msgid "Defines the source to read systems IPv6-Address from, that will be send to the DDNS provider"
-msgstr "设定IPv6地址的来源.这将会被发送给DDNS提供商"
+msgid ""
+"Defines the source to read systems IPv6-Address from, that will be send to "
+"the DDNS provider"
+msgstr "设定 IPv6 地址的来源。这将会被发送给 DDNS 提供商"
msgid "Defines which IP address 'IPv4/IPv6' is send to the DDNS provider"
-msgstr "设定哪一个IP地址(IPv4或IPv6)会被发送给DDNS提供商"
+msgstr "设定哪一个 IP 地址(IPv4 或 IPv6)会被发送给 DDNS 提供商"
msgid "Details for"
-msgstr "详情:"
+msgstr "详情"
msgid "Directory contains Log files for each running section"
msgstr "保存每一个运行中的设置的运行日志的目录"
-msgid "Directory contains PID and other status information for each running section"
+msgid ""
+"Directory contains PID and other status information for each running section"
msgstr "保存每个运行中的设置的PID以及其它状态信息的目录"
msgid "Disabled"
msgstr "已禁用"
+msgid "Domain"
+msgstr "域名"
+
msgid "Dynamic DNS"
-msgstr "动态DNS"
+msgstr "动态 DNS"
-msgid "Dynamic DNS allows that your router can be reached with a fixed hostname while having a dynamically changing IP address."
-msgstr "动态DNS允许为拥有动态IP的主机配置一个固定的可访问域名."
+msgid ""
+"Dynamic DNS allows that your router can be reached with a fixed hostname "
+"while having a dynamically changing IP address."
+msgstr "动态 DNS 允许为拥有动态 IP 的主机配置一个固定的可访问域名。"
msgid "Enable secure communication with DDNS provider"
-msgstr "启用安全连接与DDNS供应商联系"
+msgstr "启用安全连接与 DDNS 提供商联系"
msgid "Enabled"
msgstr "已启用"
msgid "File not found or empty"
msgstr "文件未找到或为空"
-msgid "Follow this link<br />You will find more hints to optimize your system to run DDNS scripts with all options"
-msgstr "打开这个链接<br />你将会得到更多关于如何通过所有设置项优化你的系统以运行DDNS脚本的提示."
+msgid ""
+"Follow this link<br />You will find more hints to optimize your system to "
+"run DDNS scripts with all options"
+msgstr ""
+"打开这个链接<br />您将会得到更多关于如何通过所有设置项优化您的系统以运行 "
+"DDNS 脚本的提示"
msgid "For detailed information about parameter settings look here."
msgstr "请看这里获得关于参数设置的详细信息"
msgstr "查看这里获取支持的编码"
msgid "Force IP Version"
-msgstr "强制设定IP版本"
+msgstr "强制设定 IP 版本"
msgid "Force IP Version not supported"
-msgstr "不支持强制设定IP版本"
+msgstr "不支持强制设定 IP 版本"
msgid "Force Interval"
msgstr "设定周期"
msgid "Force TCP on DNS"
-msgstr "强制使用TCP进行DNS查询"
+msgstr "强制使用 TCP 进行 DNS 查询"
msgid "Forced IP Version don't matched"
-msgstr "强制设定的IP版本不匹配"
+msgstr "强制设定的 IP 版本不匹配"
msgid "Format"
msgstr "格式"
msgid "Format: IP or FQDN"
-msgstr "格式:IP或者FQDN"
+msgstr "格式:IP 或者 FQDN"
-msgid "GNU Wget will use the IP of given network, cURL will use the physical interface."
-msgstr "GNU Wget将会使用给定的网络的IP地址,而cURL将会使用物理接口"
+msgid ""
+"GNU Wget will use the IP of given network, cURL will use the physical "
+"interface."
+msgstr "GNU Wget 将会使用给定的网络的 IP 地址,而 cURL 将会使用物理接口。"
msgid "Global Settings"
msgstr "全局设置"
msgid "HTTPS not supported"
-msgstr "不支持HTTPS"
+msgstr "不支持 HTTPS"
msgid "Hints"
msgstr "提示"
-msgid "Hostname/Domain"
-msgstr "主机名/域名"
+msgid "Hostname/FQDN to validate, if IP update happen or necessary"
+msgstr "主机名/FQDN 验证,如果 IP 更新发生或必要"
msgid "IP address source"
-msgstr "IP地址来源"
+msgstr "IP 地址来源"
msgid "IP address version"
-msgstr "IP地址版本"
+msgstr "IP 地址版本"
msgid "IPv4-Address"
-msgstr "IPv4地址"
+msgstr "IPv4 地址"
msgid "IPv6 address must be given in square brackets"
-msgstr "IPv6地址必须填写在中括号(\"[ ]\")内"
+msgstr "IPv6 地址必须填写在中括号(\"[ ]\")内"
-msgid "IPv6 is currently not (fully) supported by this system<br />Please follow the instructions on OpenWrt's homepage to enable IPv6 support<br />or update your system to the latest OpenWrt Release"
-msgstr "当前系统暂时不能(完整地)支持IPv6<br />请查看OpenWrt首页的介绍以启用IPv6支持<br />或者更新你的系统到最新OpenWrt版本"
+msgid ""
+"IPv6 is currently not (fully) supported by this system<br />Please follow "
+"the instructions on OpenWrt's homepage to enable IPv6 support<br />or update "
+"your system to the latest OpenWrt Release"
+msgstr ""
+"当前系统暂时不能(完整地)支持 IPv6<br />请查看 OpenWrt 首页的介绍以启用 "
+"IPv6 支持<br />或者更新您的系统到最新 OpenWrt 版本"
msgid "IPv6 not supported"
-msgstr "IPv6不被支持"
+msgstr "IPv6 不被支持"
msgid "IPv6-Address"
-msgstr "IPv6地址"
+msgstr "IPv6 地址"
msgid "If both cURL and GNU Wget are installed, Wget is used by default."
-msgstr "如果cURL和GNU Wget同时被安装,那么Wget将会被优先使用."
+msgstr "如果 cURL 和 GNU Wget 同时被安装,那么 Wget 将会被优先使用。"
-msgid "If this service section is disabled it could not be started.<br />Neither from LuCI interface nor from console"
-msgstr "如果服务配置被禁用那么它将不能被启动.<br />无论是通过LuCI页面或者是通过终端."
+msgid ""
+"If this service section is disabled it could not be started.<br />Neither "
+"from LuCI interface nor from console"
+msgstr ""
+"如果服务配置被禁用,那么它将不能被启动。<br />无论是通过 LuCI 页面或者是通过"
+"终端。"
-msgid "If you want to send updates for IPv4 and IPv6 you need to define two separate Configurations i.e. 'myddns_ipv4' and 'myddns_ipv6'"
-msgstr "å¦\82æ\9e\9cä½ é\9c\80è¦\81å\90\8cæ\97¶æ\9b´æ\96°IPv4å\92\8cIPv6å\9c°å\9d\80,ä½ é\9c\80è¦\81å\8d\95ç\8b¬æ·»å\8a 两个é\85\8d置项(ä¾\8bå¦\82'myddns_ipv4'å\92\8c'myddns_ipv6')"
+msgid "If using secure communication you should verify server certificates!"
+msgstr "å¦\82æ\9e\9c使ç\94¨å®\89å\85¨é\80\9aä¿¡ï¼\8cæ\82¨åº\94该éª\8cè¯\81æ\9c\8då\8a¡å\99¨è¯\81书ï¼\81"
-msgid "In some versions cURL/libcurl in OpenWrt is compiled without proxy support."
-msgstr "OpenWrt中,cURL/libcurl的某些版本编译时没有启用代理服务器支持"
+msgid ""
+"If you want to send updates for IPv4 and IPv6 you need to define two "
+"separate Configurations i.e. 'myddns_ipv4' and 'myddns_ipv6'"
+msgstr ""
+"如果您需要同时更新 IPv4 和 IPv6 地址,您需要单独添加两个配置项(例"
+"如'myddns_ipv4'和'myddns_ipv6')"
+
+msgid ""
+"In some versions cURL/libcurl in OpenWrt is compiled without proxy support."
+msgstr "OpenWrt 中,cURL/libcurl 的某些版本编译时没有启用代理服务器支持"
msgid "Info"
msgstr "信息"
+msgid ""
+"Install 'ca-certificates' package or needed certificates by hand into /etc/"
+"ssl/certs default directory"
+msgstr ""
+"手动将“ca-certificates”包或需要的证书安装到 /etc/ssl/certs 的默认目录中"
+
msgid "Interface"
msgstr "接口"
-msgid "Interval to check for changed IP<br />Values below 5 minutes == 300 seconds are not supported"
-msgstr "检查IP是否改变的时间隔<br />不支持低于5分钟(300秒)的数值."
+msgid ""
+"Interval to check for changed IP<br />Values below 5 minutes == 300 seconds "
+"are not supported"
+msgstr "检查 IP 是否改变的时间隔<br />不支持小于 5 分钟(300 秒)的数值。"
-msgid "Interval to force updates send to DDNS Provider<br />Setting this parameter to 0 will force the script to only run once<br />Values lower 'Check Interval' except '0' are not supported"
-msgstr "强制向提供商更新DDNS的时间周期<br />把这个参数设置为0将会让脚本仅执行一次<br />不支持低于\"检查时间周期\"的数值(除了0)."
+msgid ""
+"Interval to force updates send to DDNS Provider<br />Setting this parameter "
+"to 0 will force the script to only run once<br />Values lower 'Check "
+"Interval' except '0' are not supported"
+msgstr ""
+"强制向提供商更新 DDNS 的时间周期<br />将这个参数设置为 0 则会让脚本仅执行一次"
+"<br />不支持小于\"检查时间周期\"的数值(除了 0)。"
msgid "It is NOT recommended for casual users to change settings on this page."
-msgstr "强烈不建议初次使用的用户修改本页设定."
+msgstr "强烈不建议初次使用的用户修改本页设定。"
msgid "Last Update"
msgstr "上次更新"
msgid "Log to syslog"
msgstr "把日志记录到系统日志"
-msgid "Neither GNU Wget with SSL nor cURL installed to select a network to use for communication."
-msgstr "包含SSL支持的GNU Wget或者cURL均未被安装.无法选择一个网络用于通信."
+msgid "Lookup Hostname"
+msgstr "查询主机名"
-msgid "Neither GNU Wget with SSL nor cURL installed to support updates via HTTPS protocol."
-msgstr "包含SSL支持的GNU Wget或者cURL均未被安装.无法使用HTTPS更新DDNS"
+msgid "NOT installed"
+msgstr "未安装"
+
+msgid ""
+"Neither GNU Wget with SSL nor cURL installed to select a network to use for "
+"communication."
+msgstr "包含 SSL 支持的 GNU Wget 或者 cURL 均未安装,无法选择网络用于通信。"
+
+msgid ""
+"Neither GNU Wget with SSL nor cURL installed to support secure updates via "
+"HTTPS protocol."
+msgstr ""
+"包含 SSL 支持的 GNU Wget 或者 cURL 均未安装,无法通过 HTTPS 协议进行安全的更"
+"新。"
msgid "Network"
msgstr "网络"
msgid "Network on which the ddns-updater scripts will be started"
-msgstr "DDNS更新脚本将会被运行于该网络"
+msgstr "DDNS 更新脚本将会运行于该网络"
msgid "Never"
msgstr "从不"
msgid "Next Update"
msgstr "下次更新"
+msgid "No certificates found"
+msgstr "找不到证书"
+
msgid "No data"
msgstr "无数据"
msgstr "无日志"
msgid "Non-public and by default blocked IP's"
-msgstr "非公网IP以及默认被锁定的IP"
+msgstr "非公网 IP 以及默认被锁定的 IP"
msgid "Notice"
msgstr "提示"
msgstr "日志文件中的最后几行"
msgid "OPTIONAL: Force the usage of pure IPv4/IPv6 only communication."
-msgstr "可选:强制使用仅IPv4/IPv6通信."
+msgstr "可选:强制仅使用 IPv4/IPv6 通信。"
msgid "OPTIONAL: Force the use of TCP instead of default UDP on DNS requests."
-msgstr "可选:强制使用TCP而非UDP请求DNS."
+msgstr "可选:强制使用 TCP 而非 UDP 请求 DNS。"
msgid "OPTIONAL: Network to use for communication"
-msgstr "可选:用于通信的网络"
+msgstr "可选:用于通信的网络"
msgid "OPTIONAL: Proxy-Server for detection and updates."
-msgstr "可选:用于检测以及更新的代理服务器"
+msgstr "可选:用于检测以及更新的代理服务器。"
msgid "OPTIONAL: Use non-default DNS-Server to detect 'Registered IP'."
-msgstr "可选:使用非默认DNS服务器检测\"已注册的IP地址\""
+msgstr "可选:使用非默认 DNS 服务器检测\"已注册的 IP 地址\"。"
msgid "On Error the script will retry the failed action after given time"
-msgstr "当出错时,脚本将会重试失败的动作的次数"
+msgstr "当出错时,脚本将会重试失败的动作的次数"
msgid "On Error the script will stop execution after given number of retrys"
-msgstr "当出错时,脚本将会重试该次数之后退出"
+msgstr "当出错时,脚本将会重试该次数之后退出"
+
+msgid "OpenWrt Wiki"
+msgstr "OpenWrt Wiki"
+
+msgid "Optional Encoded Parameter"
+msgstr "可选编码参数"
+
+msgid "Optional Parameter"
+msgstr "可选参数"
+
+msgid "Optional: Replaces [PARAMENC] in Update-URL (URL-encoded)"
+msgstr "可选:替换更新 URL(已编码 URL)中的 [PARAMENC]"
+
+msgid "Optional: Replaces [PARAMOPT] in Update-URL (NOT URL-encoded)"
+msgstr "可选:替换更新 URL(未编码 URL)中的 [PARAMENC]"
msgid "Overview"
msgstr "总览"
msgstr "密码"
msgid "Path to CA-Certificate"
-msgstr "CA证书路径"
+msgstr "CA 证书路径"
msgid "Please [Save & Apply] your changes first"
msgstr "请先保存并应用您的设置"
msgstr "请更新到最新版本!"
msgid "Process ID"
-msgstr "处理ID"
+msgstr "进程 ID"
msgid "Read / Reread log file"
msgstr "读取/重新读取日志文件"
+msgid "Really change DDNS provider?"
+msgstr "确定更改 DDNS 提供商吗?"
+
msgid "Registered IP"
-msgstr "已注册的IP地址"
+msgstr "已注册的 IP 地址"
msgid "Replaces [DOMAIN] in Update-URL"
-msgstr "在更新URL中使用[DOMAIN]替换域名"
+msgstr "替换更新 URL 中的 [DOMAIN]"
-msgid "Replaces [PASSWORD] in Update-URL"
-msgstr "在更新URL中使用[PASSWORD]替换密码"
+msgid "Replaces [PASSWORD] in Update-URL (URL-encoded)"
+msgstr "替换更新 URL(已编码 URL)中的 [PASSWORD]"
-msgid "Replaces [USERNAME] in Update-URL"
-msgstr "在更新URL中使用[USERNAME]替换用户名"
+msgid "Replaces [USERNAME] in Update-URL (URL-encoded)"
+msgstr "替换更新 URL(已编码 URL)中的 [USERNAME]"
msgid "Run once"
msgstr "运行一次"
msgid "Software update required"
msgstr "需要进行软件更新"
+msgid "Specifying a DNS-Server is not supported"
+msgstr "不支持指定 DNS 服务器"
+
msgid "Start"
-msgstr "启ç\94¨"
+msgstr "启å\8a¨"
msgid "Start / Stop"
-msgstr "启用/禁用"
+msgstr "启动 / 停止"
msgid "Status directory"
msgstr "状态目录"
msgid "Stopped"
msgstr "已停止"
-msgid "The currently installed 'ddns-scripts' package did not support all available settings."
-msgstr "当前已安装的'ddns-scripts'软件包暂不支持所有可用设置项"
+msgid ""
+"The currently installed 'ddns-scripts' package did not support all available "
+"settings."
+msgstr "当前已安装的“ddns-scripts”软件包不支持所有可用设置项。"
+
+msgid "The default setting of '0' will retry infinite."
+msgstr "默认设置“0”将无限重试。"
msgid "There is no service configured."
msgstr "没有已经配置好的服务项"
msgstr "计时器设定"
msgid "To change global settings click here"
-msgstr "点击这里以更改全局设置"
+msgstr "点击这里更改全局设置"
msgid "To use cURL activate this option."
-msgstr "选中这个项以使用cURL"
+msgstr "选中此项以使用 cURL"
msgid "URL"
msgstr "URL"
msgid "URL to detect"
-msgstr "用于检测的URL"
+msgstr "用于检测的 URL"
msgid "Unknown error"
msgstr "未知错误"
-msgid "Update URL to be used for updating your DDNS Provider.<br />Follow instructions you will find on their WEB page."
-msgstr "DDNS提供商用于更新DDNS的URL<br />跟随教程你将会在它们的网站上提供这个URL."
+msgid ""
+"Update URL to be used for updating your DDNS Provider.<br />Follow "
+"instructions you will find on their WEB page."
+msgstr ""
+"DDNS 提供商用于更新 DDNS 的 URL。<br />跟随教程,您可以在它们的网站上找到这"
+"个 URL。"
msgid "Update error"
msgstr "更新错误"
msgid "Use HTTP Secure"
-msgstr "使用HTTPS"
+msgstr "使用 HTTPS"
msgid "Use cURL"
-msgstr "使用cURL"
+msgstr "使用 cURL"
msgid "User defined script to read systems IP-Address"
-msgstr "使用设定的脚本来读取系统IP地址"
+msgstr "使用设定的脚本来读取系统 IP 地址"
msgid "Username"
msgstr "用户名"
+msgid "Using specific DNS Server not supported"
+msgstr "不支持使用特定的 DNS 服务器"
+
msgid "Verify"
msgstr "验证"
msgstr "版本信息"
msgid "Waiting for changes to be applied..."
-msgstr "正在应用更改..."
+msgstr "正在应用更改…"
msgid "Warning"
msgstr "等待"
-msgid "Writes detailed messages to log file. File will be truncated automatically."
-msgstr "向日志中写入详细信息.文件将会被自动减小."
+msgid ""
+"Writes detailed messages to log file. File will be truncated automatically."
+msgstr "向日志中写入详细信息。文件将自动缩小。"
-msgid "Writes log messages to syslog. Critical Errors will always be written to syslog."
-msgstr "把日志写入系统日志.无论是否启用这项,错误信息总是会被写入系统日志"
+msgid ""
+"Writes log messages to syslog. Critical Errors will always be written to "
+"syslog."
+msgstr "把日志写入系统日志。无论是否启用这项,错误信息总是会被写入系统日志。"
-msgid "You should install BIND host package for DNS requests."
-msgstr "你需要安装BIND以请求DNS记录."
+msgid ""
+"You should install 'bind-host' or 'knot-host' or 'drill' or 'hostip' "
+"package, if you need to specify a DNS server to detect your registered IP."
+msgstr ""
+"如果您需要指定 DNS 服务器来检测您注册的 IP,您应该安装“bind-host”或“knot-"
+"host”或“drill”或“hostip”软件包。"
-msgid "You should install GNU Wget with SSL (prefered) or cURL package."
-msgstr "你需要安装包含SSL支持的GNU Wget(推荐)或是cURL软件包."
+msgid ""
+"You should install 'bind-host' or 'knot-host' or 'drill' package for DNS "
+"requests."
+msgstr "您应该为 DNS 请求安装“bind-host”或“knot-host”或“drill”软件包。"
-msgid "You should install GNU Wget with SSL or cURL package."
-msgstr "你需要安装包含SSL支持的GNU Wget或是cURL软件包."
+msgid "You should install 'wget' or 'curl' or 'uclient-fetch' package."
+msgstr "您应该安装“wget”或“curl”或“uclient-fetch”软件包。"
-msgid "You should install GNU Wget with SSL or replace libcurl."
-msgstr "你需要安装包含SSL支持的GNU Wget或替换libcurl."
+msgid ""
+"You should install 'wget' or 'curl' or 'uclient-fetch' with 'libustream-"
+"*ssl' package."
+msgstr "您应该安装“wget”或“curl”或“uclient-fetch”,及“libustream-*ssl”软件包。"
+
+msgid "You should install 'wget' or 'curl' package."
+msgstr "您应该安装“wget”或“curl”软件包。"
+
+msgid ""
+"You should install 'wget' or 'uclient-fetch' package or replace libcurl."
+msgstr "您应该安装“wget”或“uclient-fetch”软件包,或替换 libcurl。"
msgid "cURL is installed, but libcurl was compiled without proxy support."
-msgstr "cURL已经安装,但是libcurl编译时没有启用代理支持."
+msgstr "cURL 已经安装,但是 libcurl 编译时没有启用代理支持。"
msgid "cURL without Proxy Support"
-msgstr "cURL不包含代理支持"
+msgstr "cURL 没有包含代理支持"
msgid "can not detect local IP. Please select a different Source combination"
-msgstr "不能确定本地IP.请更换IP来源."
+msgstr "无法确定本地 IP。请更换 IP 来源。"
msgid "can not resolve host:"
-msgstr "不能解析主机:"
+msgstr "无法解析主机:"
msgid "config error"
msgstr "配置错误"
msgstr "目录或者到文件的路径"
msgid "either url or script could be set"
-msgstr "接受URL或者脚本"
+msgstr "接受 URL 或者脚本"
msgid "enable here"
msgstr "在这里启用"
msgid "installed"
msgstr "已安装"
-msgid "invalid - Sample"
-msgstr "不合法 - 示例"
+msgid "invalid FQDN / required - Sample"
+msgstr "FQDN 无效 / 必需 - 示例"
msgid "minimum value '0'"
-msgstr "最小值0"
+msgstr "最小值 0"
msgid "minimum value '1'"
-msgstr "最小值1"
+msgstr "最小值 1"
msgid "minimum value 5 minutes == 300 seconds"
-msgstr "最小值为5分钟(300秒)"
+msgstr "最小值为 5 分钟(300 秒)"
msgid "minutes"
msgstr "分钟"
msgstr "必须以'http://'开头"
msgid "nc (netcat) can not connect"
-msgstr "nc(netcat)不可连接"
+msgstr "nc(netcat)不可连接"
msgid "never"
msgstr "从不"
msgstr "无数据"
msgid "not found or not executable - Sample: '/path/to/script.sh'"
-msgstr "未找到或者不可执行 - 示例: '/path/to/script.sh'"
+msgstr "未找到或者不可执行 - 示例:“/path/to/script.sh”"
msgid "nslookup can not resolve host"
-msgstr "nslookup不能解析主机"
+msgstr "nslookup 不能解析主机"
msgid "or"
msgstr "或者"
msgstr "请移除该字段"
msgid "please select 'IPv4' address version"
-msgstr "请设定IPv4地址"
+msgstr "请设定 IPv4 地址"
msgid "please select 'IPv4' address version in"
-msgstr "请设定IPv4地址于"
+msgstr "请设定 IPv4 地址于"
msgid "please set to 'default'"
msgstr "请设置为\"默认\""
msgstr "秒"
msgid "to run HTTPS without verification of server certificates (insecure)"
-msgstr "使用HTTPS但不检查服务器证书(不安全)"
+msgstr "使用 HTTPS 但不检查服务器证书(不安全)"
msgid "unknown error"
msgstr "未知错误"
msgstr "未指定的错误"
msgid "use hostname, FQDN, IPv4- or IPv6-Address"
-msgstr "使用主机名或IPv4/IPv6地址"
+msgstr "使用主机名或 IPv4/IPv6 地址"
+
+#~ msgid ""
+#~ "Neither GNU Wget with SSL nor cURL installed to support updates via HTTPS "
+#~ "protocol."
+#~ msgstr "包含SSL支持的GNU Wget或者cURL均未被安装.无法使用HTTPS更新DDNS"
+
+#~ msgid "You should install BIND host package for DNS requests."
+#~ msgstr "您需要安装BIND以请求DNS记录."
+
+#~ msgid "You should install GNU Wget with SSL (preferred) or cURL package."
+#~ msgstr "您需要安装包含SSL支持的GNU Wget(推荐)或是cURL软件包."
+
+#~ msgid "You should install GNU Wget with SSL or cURL package."
+#~ msgstr "您需要安装包含SSL支持的GNU Wget或是cURL软件包."
+
+#~ msgid "You should install GNU Wget with SSL or replace libcurl."
+#~ msgstr "您需要安装包含SSL支持的GNU Wget或替换libcurl."