--- Copyright 2017 Stan Grishin <stangri@melmac.net>
+-- Copyright 2017-2018 Stan Grishin <stangri@melmac.net>
-- Licensed to the public under the Apache License 2.0.
module("luci.controller.advanced_reboot", package.seeall)
--- device_name, board_name, part1, part2, offset, env_var_1, value_1_1, value_1_2, env_var_2, value_2_1, value_2_2
devices = {
+ -- deviceName, boardName, partition1, partition2, offset, envVar1, envVar1Value1, envVar1Value2, envVar2, envVar2Value1, envVar2Value2
{"Linksys EA3500", "linksys-audi", "mtd3", "mtd5", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
{"Linksys E4200v2/EA4500", "linksys-viper", "mtd3", "mtd5", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
+ {"Linksys EA6350v3", "linksys-ea6350v3", "mtd10", "mtd12", 192, "boot_part", 1, 2},
+ {"Linksys EA8300", "linksys-ea8300", "mtd10", "mtd12", 192, "boot_part", 1, 2},
{"Linksys EA8500", "ea8500", "mtd13", "mtd15", 32, "boot_part", 1, 2},
--- {"Linksys EA9500", "linksys,panamera", "mtd3", "mtd6", 28, "boot_part", 1, 2},
+-- {"Linksys EA9500", "linksys-panamera", "mtd3", "mtd6", 28, "boot_part", 1, 2},
{"Linksys WRT1200AC", "linksys-caiman", "mtd4", "mtd6", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
{"Linksys WRT1900AC", "linksys-mamba", "mtd4", "mtd6", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
{"Linksys WRT1900ACv2", "linksys-cobra", "mtd4", "mtd6", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
{"Linksys WRT1900ACS", "linksys-shelby", "mtd4", "mtd6", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
{"Linksys WRT3200ACM", "linksys-rango", "mtd5", "mtd7", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
- {"ZyXEL NBG6817","nbg6817","mmcblk0p4","mmcblk0p7",32,nil,255,1}
+ {"Linksys WRT32X", "linksys-venom", "mtd5", "mtd7", nil, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
+ {"ZyXEL NBG6817","nbg6817","mmcblk0p4","mmcblk0p7", 32, nil, 255, 1}
}
-errorMessage = ""
-device_board_name = luci.util.trim(luci.sys.exec("cat /tmp/sysinfo/board_name"))
+errorMessage = nil
+rom_board_name = luci.util.trim(luci.sys.exec("cat /tmp/sysinfo/board_name"))
for i=1, #devices do
- table_board_name = devices[i][2]:gsub('%p','')
- if device_board_name and device_board_name:gsub('%p',''):match(table_board_name) then
+ device_board_name = devices[i][2]:gsub('%p','')
+ if rom_board_name and rom_board_name:gsub('%p',''):match(device_board_name) then
device_name = devices[i][1]
partition_one_mtd = devices[i][3] or nil
partition_two_mtd = devices[i][4] or nil
boot_envvar2_partition_one = devices[i][10] or nil
boot_envvar2_partition_two = devices[i][11] or nil
if partition_one_mtd and partition_skip then
- partition_one_label = luci.util.trim(luci.sys.exec("dd if=/dev/" .. partition_one_mtd .. " bs=1 skip=" .. partition_skip .. " count=25" .. " 2>/dev/null"))
+ partition_one_label = luci.util.trim(luci.sys.exec("dd if=/dev/" .. partition_one_mtd .. " bs=1 skip=" .. partition_skip .. " count=128" .. " 2>/dev/null"))
n, partition_one_version = string.match(partition_one_label, '(Linux)-([%d|.]+)')
end
if partition_two_mtd and partition_skip then
- partition_two_label = luci.util.trim(luci.sys.exec("dd if=/dev/" .. partition_two_mtd .. " bs=1 skip=" .. partition_skip .. " count=25" .. " 2>/dev/null"))
+ partition_two_label = luci.util.trim(luci.sys.exec("dd if=/dev/" .. partition_two_mtd .. " bs=1 skip=" .. partition_skip .. " count=128" .. " 2>/dev/null"))
n, partition_two_version = string.match(partition_two_label, '(Linux)-([%d|.]+)')
end
- if string.find(partition_one_label, "LEDE") then partition_one_os = "LEDE" end
- if string.find(partition_one_label, "OpenWrt") then partition_one_os = "OpenWrt" end
- if string.find(partition_one_label, "Linksys") then partition_one_os = "Linksys" end
- if string.find(partition_two_label, "LEDE") then partition_two_os = "LEDE" end
- if string.find(partition_two_label, "OpenWrt") then partition_two_os = "OpenWrt" end
- if string.find(partition_two_label, "Linksys") then partition_two_os = "Linksys" end
+ if partition_one_label and string.find(partition_one_label, "LEDE") then partition_one_os = "LEDE" end
+ if partition_one_label and string.find(partition_one_label, "OpenWrt") then partition_one_os = "OpenWrt" end
+ if partition_one_label and string.find(partition_one_label, "Linksys") then partition_one_os = "Linksys" end
+ if partition_two_label and string.find(partition_two_label, "LEDE") then partition_two_os = "LEDE" end
+ if partition_two_label and string.find(partition_two_label, "OpenWrt") then partition_two_os = "OpenWrt" end
+ if partition_two_label and string.find(partition_two_label, "Linksys") then partition_two_os = "Linksys" end
if device_name and device_name == "ZyXEL NBG6817" then
if not partition_one_os then partition_one_os = "ZyXEL" end
if not partition_two_os then partition_two_os = "ZyXEL" end
end
+ if device_name and device_name == "Linksys WRT32X" then
+ if not partition_one_os then partition_one_os = "Unknown/Compressed" end
+ if not partition_two_os then partition_two_os = "Unknown/Compressed" end
+ end
if not partition_one_os then partition_one_os = "Unknown" end
if not partition_two_os then partition_two_os = "Unknown" end
if partition_one_os and partition_one_version then partition_one_os = partition_one_os .. " (Linux " .. partition_one_version .. ")" end
if device_name and device_name == "ZyXEL NBG6817" then
if not zyxelFlagPartition then zyxelFlagPartition = luci.util.trim(luci.sys.exec("source /lib/functions.sh; find_mtd_part 0:DUAL_FLAG")) end
if not zyxelFlagPartition then
- errorMessage = errorMessage .. luci.i18n.translate("Unable to find Dual Boot Flag Partition." .. " ")
+ errorMessage = errorMessage or "" .. luci.i18n.translate("Unable to find Dual Boot Flag Partition." .. " ")
luci.util.perror(luci.i18n.translate("Unable to find Dual Boot Flag Partition."))
else
current_partition = tonumber(luci.sys.exec("dd if=" .. zyxelFlagPartition .. " bs=1 count=1 2>/dev/null | hexdump -n 1 -e '1/1 \"%d\"'"))
function index()
entry({"admin", "system", "advanced_reboot"}, template("advanced_reboot/advanced_reboot"), _("Advanced Reboot"), 90)
entry({"admin", "system", "advanced_reboot", "reboot"}, post("action_reboot"))
--- if device_name then entry({"admin", "system", "advanced_reboot", "altreboot"}, post("action_altreboot")) end
entry({"admin", "system", "advanced_reboot", "alternative_reboot"}, post("action_altreboot"))
entry({"admin", "system", "advanced_reboot", "power_off"}, post("action_poweroff"))
end
function action_reboot()
local uci = require "luci.model.uci".cursor()
+ local ip = uci:get("network", "lan", "ipaddr")
luci.template.render("admin_system/applyreboot", {
title = luci.i18n.translate("Rebooting..."),
msg = luci.i18n.translate("The system is rebooting now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a few minutes before you try to reconnect. It might be necessary to renew the address of your computer to reach the device again, depending on your settings."),
- addr = luci.ip.new(uci:get("network", "lan", "ipaddr")) or "192.168.1.1"
+ addr = luci.ip.new(type(ip) == "string" and ip or "192.168.1.1") or "192.168.1.1"
})
luci.sys.reboot()
end
function action_altreboot()
local uci = require "luci.model.uci".cursor()
local zyxelFlagPartition, zyxelBootFlag, zyxelNewBootFlag, errorCode, curEnvSetting, newEnvSetting
- errorMessage = ""
+ errorMessage = nil
errorCode = 0
if luci.http.formvalue("cancel") then
luci.http.redirect(luci.dispatcher.build_url('admin/system/advanced_reboot'))
--- luci.template.render("advanced_reboot/advanced_reboot",{
--- device_name=device_name,
--- boot_envvar1_partition_one=boot_envvar1_partition_one,
--- partition_one_os=partition_one_os,
--- boot_envvar1_partition_two=boot_envvar1_partition_two,
--- partition_two_os=partition_two_os,
--- current_partition=current_partition,
--- errorMessage = luci.i18n.translate("Alternative reboot cancelled.")})
return
end
local step = tonumber(luci.http.formvalue("step") or 1)
newEnvSetting = curEnvSetting == boot_envvar1_partition_one and boot_envvar1_partition_two or boot_envvar1_partition_one
errorCode = luci.sys.call("/usr/sbin/fw_setenv " .. boot_envvar1 .. " " .. newEnvSetting)
if errorCode ~= 0 then
- errorMessage = errorMessage .. luci.i18n.translate("Unable to set firmware environment variable") .. ": " .. boot_envvar1 .. " " .. luci.i18n.translate("to") .. " " .. newEnvSetting .. ". "
+ errorMessage = errorMessage or "" .. luci.i18n.translate("Unable to set firmware environment variable") .. ": " .. boot_envvar1 .. " " .. luci.i18n.translate("to") .. " " .. newEnvSetting .. ". "
luci.util.perror(luci.i18n.translate("Unable to set firmware environment variable") .. ": " .. boot_envvar1 .. " " .. luci.i18n.translate("to") .. " " .. newEnvSetting .. ".")
end
end
if boot_envvar2 then
curEnvSetting = luci.util.trim(luci.sys.exec("/usr/sbin/fw_printenv -n " .. boot_envvar2))
if not curEnvSetting then
- errorMessage = errorMessage .. luci.i18n.translate("Unable to obtain firmware environment variable") .. ": " .. boot_envvar2 .. ". "
+ errorMessage = errorMessage or "" .. luci.i18n.translate("Unable to obtain firmware environment variable") .. ": " .. boot_envvar2 .. ". "
luci.util.perror(luci.i18n.translate("Unable to obtain firmware environment variable") .. ": " .. boot_envvar2 .. ".")
else
newEnvSetting = curEnvSetting == boot_envvar2_partition_one and boot_envvar2_partition_two or boot_envvar2_partition_one
errorCode = luci.sys.call("/usr/sbin/fw_setenv " .. boot_envvar2 .. " '" .. newEnvSetting .. "'")
if errorCode ~= 0 then
- errorMessage = errorMessage .. luci.i18n.translate("Unable to set firmware environment variable") .. ": " .. boot_envvar2 .. " " .. luci.i18n.translate("to") .. " " .. newEnvSetting .. ". "
+ errorMessage = errorMessage or "" .. luci.i18n.translate("Unable to set firmware environment variable") .. ": " .. boot_envvar2 .. " " .. luci.i18n.translate("to") .. " " .. newEnvSetting .. ". "
luci.util.perror(luci.i18n.translate("Unable to set firmware environment variable") .. ": " .. boot_envvar2 .. " " .. luci.i18n.translate("to") .. " " .. newEnvSetting .. ".")
end
end
if zyxelNewBootFlag then
errorCode = luci.sys.call("printf \"" .. zyxelNewBootFlag .. "\" >" .. zyxelFlagPartition )
if errorCode ~= 0 then
- errorMessage = errorMessage .. luci.i18n.translate("Unable to set Dual Boot Flag Partition entry for partition") .. ": " .. zyxelFlagPartition .. ". "
+ errorMessage = errorMessage or "" .. luci.i18n.translate("Unable to set Dual Boot Flag Partition entry for partition") .. ": " .. zyxelFlagPartition .. ". "
luci.util.perror(luci.i18n.translate("Unable to set Dual Boot Flag Partition entry for partition") .. ": " .. zyxelFlagPartition .. ".")
end
end
end
end
- if errorMessage == "" then
+ if not errorMessage then
luci.template.render("admin_system/applyreboot", {
title = luci.i18n.translate("Rebooting..."),
msg = luci.i18n.translate("The system is rebooting to an alternative partition now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a few minutes before you try to reconnect. It might be necessary to renew the address of your computer to reach the device again, depending on your settings."),
luci.sys.reboot()
else
luci.template.render("advanced_reboot/advanced_reboot",{
+ rom_board_name=rom_board_name,
device_name=device_name,
boot_envvar1_partition_one=boot_envvar1_partition_one,
partition_one_os=partition_one_os,