Don't remove lzma host utility with make clean{_all}

[oweals/u-boot_mod.git] / README.md

diff --git a/README.md b/README.md
index 4145fcc7e8cc85c9af3d9fbdb26574a886d3d166..5c44c5eaf9bf2f39a11e438fb8ec6673f0928f4f 100644 (file)
--- a/README.md
+++ b/README.md
@@ -93,6 +93,8 @@ Currently supported devices:
   - TP-Link TL-WR820N (version for Chinese market)
   - TP-Link TL-WR802N
   - Wallys DR531
+  - Zbtlink ZBT-WE1526
+  - Comfast CF-E520N
 
 I tested this modification on most of these devices, with OpenWrt and OFW firmware. If you are not sure about the version of your device, please contact with me **before** you try to make an upgrade. Changing bootloader to a wrong version will probably damage your router and you will need special hardware to fix it, so please, **be very careful**.
 
@@ -127,6 +129,8 @@ More information about supported devices:
 | [TP-Link TL-WR820N](https://wiki.openwrt.org/toh/tp-link/tl-wr820n) | QCA9531 | 4 MiB | 64 MiB DDR2 | 64 KiB, LZMA | RO |
 | [TP-Link TL-WR802N](https://wikidevi.com/wiki/TP-LINK_TL-WR802N_v1.0) | QCA9533 | 4 MiB | 32 MiB DDR1 | 64 KiB, LZMA | RO |
 | Wallys DR531 | QCA9531 | 8 MiB | 64 MiB DDR2 | 192 KiB | R/W |
+| Zbtlink ZBT-WE1526 | QCA9531 | 16 MiB | 128 MiB DDR2 | 256 KiB | R/W |
+| Comfast CF-E520N | QCA9531 | 8 MiB | 32 MiB DDR2 | 64 KiB, LZMA | RO |
 
 *(LZMA) - U-Boot binary image is compressed with LZMA.*  
 *(R/W) - environment exists in separate FLASH block which allows you to save it and keep after power down.*
@@ -321,6 +325,7 @@ Currently supported FLASH types:
 **16 MiB**:
 
 - Winbond W25Q128 (16 MB, JEDEC ID: EF 4018)*
+- Winbond W25Q128FW (16 MB, JEDEC ID: EF 6018, 1,8 V)*
 - Macronix MX25L128 (16 MB, JEDEC ID: C2 2018, C2 2618)
 - Spansion S25FL127S (16 MB, JEDEC ID: 01 2018)*
 - Micron N25Q128 (16 MB, JEDEC ID: 20 BA18)
@@ -674,9 +679,9 @@ make tplink_wr703n
 
 will start building U-Boot image for **TP-Link TL-WR703N**.
 
-### Building on OS X
+### Building on macOS (OS X)
 
-You can build using the openwrt/lede toolchain as above under OS X as long as you install several gnu command line tools via brew. Note that bash is required to correct the usage of colorized echo output within the Makefiles (I was suprised how inconsistent FreeBSD is with Linux in this regard).
+You can build using the OpenWrt/LEDE toolchain as above under macOS (OS X) as long as you install several gnu command line tools via brew. Note that bash is required to correct the usage of colorized echo output within the Makefiles (I was suprised how inconsistent FreeBSD is with Linux/GNU in this regard).
 
 ```
 brew install bash coreutils gnu-sed
@@ -688,8 +693,6 @@ Subsequently, in addition to the toolchain being in your path, you will need to
 export PATH=/usr/local/opt/coreutils/libexec/gnubin:/usr/local/opt/gnu-sed/libexec/gnubin:$PATH
 ```
 
-Lastly, you will need a localised (osx) build of lzma replacing the supplied ELF32 binary in the host_utils folder. I have tested with [lzma-4.32.7](http://tukaani.org/lzma/lzma-4.32.7.tar.gz) ; just run ./configure and then make and grab the executable from src/lzma.
-
 This process was tested on Yosemite and El Capitan.
 
 FAQ