checkpatch: Support wide strings

[oweals/u-boot.git] / README

diff --git a/README b/README
index c0c8b559f9bcac54a706cad7f4adf0a70550b1a2..f28817622820eace9a7d6c95c7e372aaa3033ab1 100644 (file)
--- a/README
+++ b/README
@@ -322,6 +322,10 @@ build a config tool - later.
                Defined For SoC that has cache coherent interconnect
                CCN-400
 
+               CONFIG_SYS_FSL_HAS_CCN504
+
+               Defined for SoC that has cache coherent interconnect CCN-504
+
 The following options need to be configured:
 
 - CPU Type:    Define exactly one, e.g. CONFIG_MPC85XX.
@@ -1024,21 +1028,6 @@ The following options need to be configured:
                        control registers. This behavior won't affect the
                        correctnessof 10/100 link speed update.
 
-               CONFIG_SMC911X
-               Support for SMSC's LAN911x and LAN921x chips
-
-                       CONFIG_SMC911X_BASE
-                       Define this to hold the physical address
-                       of the device (I/O space)
-
-                       CONFIG_SMC911X_32_BIT
-                       Define this if data bus is 32 bits
-
-                       CONFIG_SMC911X_16_BIT
-                       Define this if data bus is 16 bits. If your processor
-                       automatically converts one 32 bit word to two 16 bit
-                       words you may also try CONFIG_SMC911X_32_BIT.
-
                CONFIG_SH_ETHER
                Support for Renesas on-chip Ethernet controller
 
@@ -2308,13 +2297,6 @@ The following options need to be configured:
                this is instead controlled by the value of
                /config/load-environment.
 
-- DataFlash Support:
-               CONFIG_HAS_DATAFLASH
-
-               Defining this option enables DataFlash features and
-               allows to read/write in Dataflash via the standard
-               commands cp, md...
-
 - Serial Flash support
                Usage requires an initial 'sf probe' to define the serial
                flash parameters, followed by read/write/erase/update