- SSLeay 0.8.1b 29-Jun-1998
- Copyright (c) 1997, Eric Young
- All rights reserved.
-
-This directory contains Eric Young's (eay@cryptsoft.com) implementation
-of SSL and supporting libraries.
-
-The current version of this library is available from
- ftp://ftp.psy.uq.oz.au/pub/Crypto/SSL/SSLeay-x.x.x.tar.gz
-
-There are patches to a number of internet applications which can be found in
- ftp://ftp.psy.uq.oz.au/pub/Crypto/SSLapps/
-
-A Web page containing the SSLeay FAQ written by Tim Hudson <tjh@cryptsoft.com>
-can be found at
- http://www.psy.uq.oz.au/~ftp/Crypto
-
-Additional documentation is being slowly written by Eric Young, and is being
-added to http://www.cryptsoft.com/ssleay/doc. It will normally also be
-available on http://www.psy.uq.oz.au/~ftp/Crypto/ssleay
-
-This Library and programs are FREE for commercial and non-commercial
-usage. The only restriction is that I must be attributed with the
-development of this code. See the COPYRIGHT file for more details.
-Donations would still be accepted :-).
-
-THIS LIBRARY IS NOT %100 COMPATABLE WITH SSLeay 0.6.6
-
-The package includes
-
-libssl.a:
- My implementation of SSLv2, SSLv3 and the required code to support
- both SSLv2 and SSLv3 in the one server.
-
-libcrypto.a:
- General encryption and X509 stuff needed by SSL but not
- actually logically part of it. It includes routines for the following:
-
- Ciphers
- libdes - My libdes DES encryption package which has been floating
- around the net for a few years. It includes 15
- 'modes/variations' of DES (1, 2 and 3 key versions of ecb,
- cbc, cfb and ofb; pcbc and a more general form of cfb and ofb)
- including desx in cbc mode,
- a fast crypt(3), and routines to read passwords from the
- keyboard.
- RC4 encryption,
- RC2 encryption - 4 different modes, ecb, cbc, cfb and ofb.
- Blowfish encryption - 4 different modes, ecb, cbc, cfb and ofb.
- IDEA encryption - 4 different modes, ecb, cbc, cfb and ofb.
-
- Digests
- MD5 and MD2 message digest algorithms, fast implementations,
- SHA (SHA-0) and SHA-1 message digest algorithms,
- MDC2 message digest. A DES based hash that is polular on smart cards.
-
- Public Key
- RSA encryption/decryption/generation. There is no limit
- on the number of bits.
- DSA encryption/decryption/generation. There is no limit on the
- number of bits.
- Diffie-Hellman key-exchange/key generation. There is no limit
- on the number of bits.
-
- X509v3 certificates
- X509 encoding/decoding into/from binary ASN1 and a PEM
- based ascii-binary encoding which supports encryption with
- a private key.
- Program to generate RSA and DSA certificate requests and to
- generate RSA and DSA certificates.
-
- Systems
- The normal digital envelope routines and base64 encoding.
- Higher level access to ciphers and digests by name. New ciphers can be
- loaded at run time.
- The BIO io system which is a simple non-blocking IO abstraction.
- Current methods supported are file descriptors, sockets,
- socket accept, socket connect, memory buffer, buffering,
- SSL client/server, file pointer, encryption, digest,
- non-blocking testing and null.
- Data structures
- A dynamically growing hashing system
- A simple stack.
- A Configuration loader that uses a format similar to MS .ini files.
-
-Programs in this package include
- enc - a general encryption program that can encrypt/decrypt using
- one of 17 different cipher/mode combinations. The
- input/output can also be converted to/from base64
- ascii encoding.
- dgst - a generate message digesting program that will generate
- message digests for any of md2, md5, sha (sha-0 or sha-1)
- or mdc2.
- asn1parse - parse and display the structure of an asn1 encoded
- binary file.
- rsa - Manipulate RSA private keys.
- dsa - Manipulate DSA private keys.
- dh - Manipulate Diffie-Hellman parameter files.
- dsaparam- Manipulate and generate DSA parameter files.
- crl - Manipulate certificate revocation lists.
- crt2pkcs7- Generate a pkcs7 object containing a crl and a certificate.
- x509 - Manipulate x509 certificates, self-sign certificates.
- req - Manipulate PKCS#10 certificate requests and also
- generate certificate requests.
- genrsa - Generates an arbitrary sized RSA private key.
- gendh - Generates a set of Diffie-Hellman parameters, the prime
- will be a strong prime.
- ca - Create certificates from PKCS#10 certificate requests.
- This program also maintains a database of certificates
- issued.
- verify - Check x509 certificate signatures.
- speed - Benchmark SSLeay's ciphers.
- s_server- A test SSL server.
- s_client- A test SSL client.
- s_time - Benchmark SSL performance of SSL server programs.
- errstr - Convert from SSLeay hex error codes to a readable form.
-
-Documents avaliable are
- A Postscript and html reference manual
- (written by Tim Hudson tjh@cryptsoft.com).
-
- A list of text protocol references I used.
- An initial version of the library manual.
-
-To install this package, read the INSTALL file.
-For the Microsoft word, read MICROSOFT
-This library has been compiled and tested on Solaris 2.[34] (sparc and x86),
-SunOS 4.1.3, DGUX, OSF1 Alpha, HPUX 9, AIX 3.5(?), IRIX 5.[23],
-LINUX, NeXT (intel), linux, Windows NT, Windows 3.1, MSDOS 6.22.
-
-Multithreading has been tested under Windows NT and Solaris 2.5.1
-
-Due to time constraints, the current release has only be rigorously tested
-on Solaris 2.[45], Linux and Windows NT.
-
-For people in the USA, it is possible to compile SSLeay to use RSA
-Inc.'s public key library, RSAref. From my understanding, it is
-claimed by RSA Inc. to be illegal to use my public key routines inside the USA.
-Read doc/rsaref.doc on how to build with RSAref.
-
-Read the documentation in the doc directory. It is quite rough,
-but it lists the functions, you will probably have to look at
-the code to work out how to used them. I will be working on
-documentation. Look at the example programs.
-
-There should be a SSL reference manual which is being put together by
-Tim Hudson (tjh@cryptsoft.com) in the same location as this
-distribution. This contains a lot more information that is very
-useful. For a description of X509 Certificates, their use, and
-certification, read rfc1421, rfc1422, rfc1423 and rfc1424. ssl/README
-also goes over the mechanism.
-
-We have setup some mailing lists for use by people that are interested
-in helping develop this code and/or ask questions.
- ssl-bugs@mincom.oz.au
- ssl-users@mincom.oz.au
- ssl-bugs-request@mincom.oz.au
- ssl-users-request@mincom.oz.au
-
-I have recently read about a new form of software, that which is in
-a permanent state of beta release. Linux and Netscape are 2 good
-examples of this, and I would also add SSLeay to this category.
-The Current stable release is 0.6.6. It has a few minor problems.
-0.8.0 is not call compatable so make sure you have the correct version
-of SSLeay to link with.
-
-eric (Jun 1997)
-
-Eric Young (eay@cryptsoft.com)
-86 Taunton St.
-Annerley 4103.
-Australia.
+ OpenSSL 1.1.0-pre6-dev
+
+ Copyright (c) 1998-2016 The OpenSSL Project
+ Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson
+ All rights reserved.
+
+ DESCRIPTION
+ -----------
+
+ The OpenSSL Project is a collaborative effort to develop a robust,
+ commercial-grade, fully featured, and Open Source toolkit implementing the
+ Secure Sockets Layer (SSLv3) and Transport Layer Security (TLS) protocols as
+ well as a full-strength general purpose cryptographic library. The project is
+ managed by a worldwide community of volunteers that use the Internet to
+ communicate, plan, and develop the OpenSSL toolkit and its related
+ documentation.
+
+ OpenSSL is descended from the SSLeay library developed by Eric A. Young
+ and Tim J. Hudson. The OpenSSL toolkit is licensed under a dual-license (the
+ OpenSSL license plus the SSLeay license), which means that you are free to
+ get and use it for commercial and non-commercial purposes as long as you
+ fulfill the conditions of both licenses.
+
+ OVERVIEW
+ --------
+
+ The OpenSSL toolkit includes:
+
+ libssl (with platform specific naming):
+ Provides the client and server-side implementations for SSLv3 and TLS.
+
+ libcrypto (with platform specific naming):
+ Provides general cryptographic and X.509 support needed by SSL/TLS but
+ not logically part of it.
+
+ openssl:
+ A command line tool that can be used for:
+ Creation of key parameters
+ Creation of X.509 certificates, CSRs and CRLs
+ Calculation of message digests
+ Encryption and decryption
+ SSL/TLS client and server tests
+ Handling of S/MIME signed or encrypted mail
+ And more...
+
+ INSTALLATION
+ ------------
+
+ See the appropriate file:
+ INSTALL Linux, Unix, Windows, OpenVMS
+ INSTALL.DJGPP DOS platform with DJGPP
+ INSTALL.WCE Windows CE
+
+ SUPPORT
+ -------
+
+ See the OpenSSL website www.openssl.org for details on how to obtain
+ commercial technical support.
+
+ If you have any problems with OpenSSL then please take the following steps
+ first:
+
+ - Download the current snapshot from ftp://ftp.openssl.org/snapshot/
+ to see if the problem has already been addressed
+ - Remove ASM versions of libraries
+ - Remove compiler optimisation flags
+
+ If you wish to report a bug then please include the following information in
+ any bug report:
+
+ - On Unix systems:
+ Self-test report generated by 'make report'
+ - On other systems:
+ OpenSSL version: output of 'openssl version -a'
+ OS Name, Version, Hardware platform
+ Compiler Details (name, version)
+ - Application Details (name, version)
+ - Problem Description (steps that will reproduce the problem, if known)
+ - Stack Traceback (if the application dumps core)
+
+ Email the report to:
+
+ rt@openssl.org
+
+ In order to avoid spam, this is a moderated mailing list, and it might
+ take a day for the ticket to show up. (We also scan posts to make sure
+ that security disclosures aren't publically posted by mistake.) Mail
+ to this address is recorded in the public RT (request tracker) database
+ (see https://www.openssl.org/community/index.html#bugs for details) and
+ also forwarded the public openssl-dev mailing list. Confidential mail
+ may be sent to openssl-security@openssl.org (PGP key available from the
+ key servers).
+
+ Please do NOT use this for general assistance or support queries.
+ Just because something doesn't work the way you expect does not mean it
+ is necessarily a bug in OpenSSL.
+
+ You can also make GitHub pull requests. If you do this, please also send
+ mail to rt@openssl.org with a link to the PR so that we can more easily
+ keep track of it.
+
+ HOW TO CONTRIBUTE TO OpenSSL
+ ----------------------------
+
+ See CONTRIBUTING
+
+ LEGALITIES
+ ----------
+
+ A number of nations, in particular the U.S., restrict the use or export
+ of cryptography. If you are potentially subject to such restrictions
+ you should seek competent professional legal advice before attempting to
+ develop or distribute cryptographic code.