ARM: dts: da850-evm: Re-sync with Kernel 5.0

[oweals/u-boot.git] / README

diff --git a/README b/README
index f7ed7eaae16c8460625a6b38727dfab3db7fdb9e..da033dc66f2969b6ce78e97f183c5d2f668d3cff 100644 (file)
--- a/README
+++ b/README
@@ -1146,9 +1146,6 @@ The following options need to be configured:
                CONFIG_DFU_OVER_USB
                This enables the USB portion of the DFU USB class
 
-               CONFIG_DFU_MMC
-               This enables support for exposing (e)MMC devices via DFU.
-
                CONFIG_DFU_NAND
                This enables support for exposing NAND devices via DFU.
 
@@ -1429,15 +1426,6 @@ The following options need to be configured:
                forwarded through a router.
                (Environment variable "netmask")
 
-- Multicast TFTP Mode:
-               CONFIG_MCAST_TFTP
-
-               Defines whether you want to support multicast TFTP as per
-               rfc-2090; for example to work with atftp.  Lets lots of targets
-               tftp down the same boot image concurrently.  Note: the Ethernet
-               driver in use must provide a function: mcast() to join/leave a
-               multicast group.
-
 - BOOTP Recovery Mode:
                CONFIG_BOOTP_RANDOM_DELAY
 
@@ -1932,14 +1920,6 @@ The following options need to be configured:
                SPI configuration items (port pins to use, etc). For
                an example, see include/configs/sacsng.h.
 
-               CONFIG_HARD_SPI
-
-               Enables a hardware SPI driver for general-purpose reads
-               and writes.  As with CONFIG_SOFT_SPI, the board configuration
-               must define a list of chip-select function pointers.
-               Currently supported on some MPC8xxx processors.  For an
-               example, see include/configs/mpc8349emds.h.
-
                CONFIG_SYS_SPI_MXC_WAIT
                Timeout for waiting until spi transfer completed.
                default: (CONFIG_SYS_HZ/100)     /* 10 ms */
@@ -3237,8 +3217,8 @@ Low Level (hardware related) configuration options:
                a 16 bit bus.
                Not all NAND drivers use this symbol.
                Example of drivers that use it:
-               - drivers/mtd/nand/ndfc.c
-               - drivers/mtd/nand/mxc_nand.c
+               - drivers/mtd/nand/raw/ndfc.c
+               - drivers/mtd/nand/raw/mxc_nand.c
 
 - CONFIG_SYS_NDFC_EBC0_CFG
                Sets the EBC0_CFG register for the NDFC. If not defined
@@ -3355,7 +3335,7 @@ Low Level (hardware related) configuration options:
 - CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
                Option to disable subpage write in NAND driver
                driver that uses this:
-               drivers/mtd/nand/davinci_nand.c
+               drivers/mtd/nand/raw/davinci_nand.c
 
 Freescale QE/FMAN Firmware Support:
 -----------------------------------