drivers/net/vsc9953: Fix missing reserved register

[oweals/u-boot.git] / README

diff --git a/README b/README
index 1bcb63c7e39b8316ca8642dce640f543a5f6b012..a13705ae7a846bc5d7f51a21e21f81c4fc87810e 100644 (file)
--- a/README
+++ b/README
@@ -705,6 +705,7 @@ The following options need to be configured:
                CONFIG_ARM_ERRATA_454179
                CONFIG_ARM_ERRATA_621766
                CONFIG_ARM_ERRATA_798870
+               CONFIG_ARM_ERRATA_801819
 
 - Tegra SoC options:
                CONFIG_TEGRA_SUPPORT_NON_SECURE
@@ -839,18 +840,6 @@ The following options need to be configured:
                define this to a list of base addresses for each (supported)
                port. See e.g. include/configs/versatile.h
 
-               CONFIG_PL011_SERIAL_RLCR
-
-               Some vendor versions of PL011 serial ports (e.g. ST-Ericsson U8500)
-               have separate receive and transmit line control registers.  Set
-               this variable to initialize the extra register.
-
-               CONFIG_PL011_SERIAL_FLUSH_ON_INIT
-
-               On some platforms (e.g. U8500) U-Boot is loaded by a second stage
-               boot loader that has already initialized the UART.  Define this
-               variable to flush the UART at init time.
-
                CONFIG_SERIAL_HW_FLOW_CONTROL
 
                Define this variable to enable hw flow control in serial driver.
@@ -1381,9 +1370,6 @@ The following options need to be configured:
                Management command for E1000 devices.  When used on devices
                with SPI support you can reprogram the EEPROM from U-Boot.
 
-               CONFIG_E1000_FALLBACK_MAC
-               default MAC for empty EEPROM after production.
-
                CONFIG_EEPRO100
                Support for Intel 82557/82559/82559ER chips.
                Optional CONFIG_EEPRO100_SROM_WRITE enables EEPROM
@@ -1496,12 +1482,6 @@ The following options need to be configured:
                Support for i2c bus TPM devices. Only one device
                per system is supported at this time.
 
-                       CONFIG_TPM_TIS_I2C_BUS_NUMBER
-                       Define the the i2c bus number for the TPM device
-
-                       CONFIG_TPM_TIS_I2C_SLAVE_ADDRESS
-                       Define the TPM's address on the i2c bus
-
                        CONFIG_TPM_TIS_I2C_BURST_LIMITATION
                        Define the burst count bytes upper limit