#
-# (C) Copyright 2000 - 2012
+# (C) Copyright 2000 - 2013
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
+# SPDX-License-Identifier: GPL-2.0+
#
Summary:
/mpc5xx Files specific to Freescale MPC5xx CPUs
/mpc5xxx Files specific to Freescale MPC5xxx CPUs
/mpc8xx Files specific to Freescale MPC8xx CPUs
- /mpc8220 Files specific to Freescale MPC8220 CPUs
/mpc824x Files specific to Freescale MPC824x CPUs
/mpc8260 Files specific to Freescale MPC8260 CPUs
/mpc85xx Files specific to Freescale MPC85xx CPUs
See Freescale App Note 4493 for more information about
this erratum.
+ CONFIG_A003399_NOR_WORKAROUND
+ Enables a workaround for IFC erratum A003399. It is only
+ requred during NOR boot.
+
CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY
This is the value to write into CCSR offset 0x18600
according to the A004510 workaround.
+ CONFIG_SYS_FSL_DSP_M2_RAM_ADDR
+ This value denotes start offset of M2 memory
+ which is directly connected to the DSP core.
+
+ CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
+ This value denotes start offset of DSP CCSR space.
+
- Generic CPU options:
CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN
exists, unlike the similar options in the Linux kernel. Do not
set these options unless they apply!
+- CPU timer options:
+ CONFIG_SYS_HZ
+
+ The frequency of the timer returned by get_timer().
+ get_timer() must operate in milliseconds and this CONFIG
+ option must be set to 1000.
+
- Linux Kernel Interface:
CONFIG_CLOCKS_IN_MHZ
CONFIG_CMD_FDOS * Dos diskette Support
CONFIG_CMD_FLASH flinfo, erase, protect
CONFIG_CMD_FPGA FPGA device initialization support
+ CONFIG_CMD_FUSE * Device fuse support
CONFIG_CMD_GETTIME * Get time since boot
CONFIG_CMD_GO * the 'go' command (exec code)
CONFIG_CMD_GREPENV * search environment
CONFIG_CMD_IDE * IDE harddisk support
CONFIG_CMD_IMI iminfo
CONFIG_CMD_IMLS List all images found in NOR flash
- CONFIG_CMD_IMLS_NAND List all images found in NAND flash
+ CONFIG_CMD_IMLS_NAND * List all images found in NAND flash
CONFIG_CMD_IMMAP * IMMR dump support
CONFIG_CMD_IMPORTENV * import an environment
CONFIG_CMD_INI * import data from an ini file into the env
CONFIG_CMD_ITEST Integer/string test of 2 values
CONFIG_CMD_JFFS2 * JFFS2 Support
CONFIG_CMD_KGDB * kgdb
- CONFIG_CMD_LDRINFO ldrinfo (display Blackfin loader)
+ CONFIG_CMD_LDRINFO * ldrinfo (display Blackfin loader)
CONFIG_CMD_LINK_LOCAL * link-local IP address auto-configuration
(169.254.*.*)
CONFIG_CMD_LOADB loadb
CONFIG_CMD_LOADS loads
- CONFIG_CMD_MD5SUM print md5 message digest
+ CONFIG_CMD_MD5SUM * print md5 message digest
(requires CONFIG_CMD_MEMORY and CONFIG_MD5)
CONFIG_CMD_MEMINFO * Display detailed memory information
CONFIG_CMD_MEMORY md, mm, nm, mw, cp, cmp, crc, base,
loop, loopw
- CONFIG_CMD_MEMTEST mtest
+ CONFIG_CMD_MEMTEST * mtest
CONFIG_CMD_MISC Misc functions like sleep etc
CONFIG_CMD_MMC * MMC memory mapped support
CONFIG_CMD_MII * MII utility commands
CONFIG_CMD_MTDPARTS * MTD partition support
CONFIG_CMD_NAND * NAND support
CONFIG_CMD_NET bootp, tftpboot, rarpboot
+ CONFIG_CMD_NFS NFS support
CONFIG_CMD_PCA953X * PCA953x I2C gpio commands
CONFIG_CMD_PCA953X_INFO * PCA953x I2C gpio info command
CONFIG_CMD_PCI * pciinfo
CONFIG_CMD_SETGETDCR Support for DCR Register access
(4xx only)
CONFIG_CMD_SF * Read/write/erase SPI NOR flash
- CONFIG_CMD_SHA1SUM print sha1 memory digest
+ CONFIG_CMD_SHA1SUM * print sha1 memory digest
(requires CONFIG_CMD_MEMORY)
+ CONFIG_CMD_SOFTSWITCH * Soft switch setting command for BF60x
CONFIG_CMD_SOURCE "source" command Support
CONFIG_CMD_SPI * SPI serial bus support
CONFIG_CMD_TFTPSRV * TFTP transfer in server mode
CONFIG_CMD_USB * USB support
CONFIG_CMD_CDP * Cisco Discover Protocol support
CONFIG_CMD_MFSL * Microblaze FSL support
+ CONFIG_CMD_XIMG Load part of Multi Image
EXAMPLE: If you want all functions except of network
XXX - this list needs to get updated!
+- Regular expression support:
+ CONFIG_REGEX
+ If this variable is defined, U-Boot is linked against
+ the SLRE (Super Light Regular Expression) library,
+ which adds regex support to some commands, as for
+ example "env grep" and "setexpr".
+
- Device tree:
CONFIG_OF_CONTROL
If this variable is defined, U-Boot will use a device tree
If this option is set, the driver enables cache flush.
- TPM Support:
- CONFIG_GENERIC_LPC_TPM
+ CONFIG_TPM
+ Support TPM devices.
+
+ CONFIG_TPM_TIS_I2C
+ Support for i2c bus TPM devices. Only one device
+ per system is supported at this time.
+
+ CONFIG_TPM_TIS_I2C_BUS_NUMBER
+ Define the the i2c bus number for the TPM device
+
+ CONFIG_TPM_TIS_I2C_SLAVE_ADDRESS
+ Define the TPM's address on the i2c bus
+
+ CONFIG_TPM_TIS_I2C_BURST_LIMITATION
+ Define the burst count bytes upper limit
+
+ CONFIG_TPM_ATMEL_TWI
+ Support for Atmel TWI TPM device. Requires I2C support.
+
+ CONFIG_TPM_TIS_LPC
Support for generic parallel port TPM devices. Only one device
per system is supported at this time.
to. Contemporary x86 systems usually map it at
0xfed40000.
+ CONFIG_CMD_TPM
+ Add tpm monitor functions.
+ Requires CONFIG_TPM. If CONFIG_TPM_AUTH_SESSIONS is set, also
+ provides monitor access to authorized functions.
+
+ CONFIG_TPM
+ Define this to enable the TPM support library which provides
+ functional interfaces to some TPM commands.
+ Requires support for a TPM device.
+
+ CONFIG_TPM_AUTH_SESSIONS
+ Define this to enable authorized functions in the TPM library.
+ Requires CONFIG_TPM and CONFIG_SHA1.
+
- USB Support:
At the moment only the UHCI host controller is
supported (PIP405, MIP405, MPC5200); define
CONFIG_USB_EHCI_TXFIFO_THRESH enables setting of the
txfilltuning field in the EHCI controller on reset.
+ CONFIG_USB_HUB_MIN_POWER_ON_DELAY defines the minimum
+ interval for usb hub power-on delay.(minimum 100msec)
+
- USB Device:
Define the below if you wish to use the USB console.
Once firmware is rebuilt from a serial console issue the
CONFIG_SH_MMCIF_CLK
Define the clock frequency for MMCIF
+- USB Device Firmware Update (DFU) class support:
+ CONFIG_DFU_FUNCTION
+ This enables the USB portion of the DFU USB class
+
+ CONFIG_CMD_DFU
+ This enables the command "dfu" which is used to have
+ U-Boot create a DFU class device via USB. This command
+ requires that the "dfu_alt_info" environment variable be
+ set and define the alt settings to expose to the host.
+
+ CONFIG_DFU_MMC
+ This enables support for exposing (e)MMC devices via DFU.
+
+ CONFIG_DFU_NAND
+ This enables support for exposing NAND devices via DFU.
+
+ CONFIG_SYS_DFU_DATA_BUF_SIZE
+ Dfu transfer uses a buffer before writing data to the
+ raw storage device. Make the size (in bytes) of this buffer
+ configurable. The size of this buffer is also configurable
+ through the "dfu_bufsiz" environment variable.
+
+ CONFIG_SYS_DFU_MAX_FILE_SIZE
+ When updating files rather than the raw storage device,
+ we use a static buffer to copy the file into and then write
+ the buffer once we've been given the whole file. Define
+ this to the maximum filesize (in bytes) for the buffer.
+ Default is 4 MiB if undefined.
+
- Journaling Flash filesystem support:
CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE,
CONFIG_JFFS2_NAND_DEV
Export function i8042_kbd_init, i8042_tstc and i8042_getc
for cfb_console. Supports cursor blinking.
+ CONFIG_CROS_EC_KEYB
+ Enables a Chrome OS keyboard using the CROS_EC interface.
+ This uses CROS_EC to communicate with a second microcontroller
+ which provides key scans on request.
+
- Video support:
CONFIG_VIDEO
=> vertically centered image
at x = dspWidth - bmpWidth - 9
- CONFIG_SPLASH_SCREEN_PREPARE
-
- If this option is set then the board_splash_screen_prepare()
- function, which must be defined in your code, is called as part
- of the splash screen display sequence. It gives the board an
- opportunity to prepare the splash image data before it is
- processed and sent to the frame buffer by U-Boot.
-
- Gzip compressed BMP image support: CONFIG_VIDEO_BMP_GZIP
If this option is set, additionally to standard BMP
on those systems that support this (optional)
feature, like the TQM8xxL modules.
-- I2C Support: CONFIG_HARD_I2C | CONFIG_SOFT_I2C
-
- These enable I2C serial bus commands. Defining either of
- (but not both of) CONFIG_HARD_I2C or CONFIG_SOFT_I2C will
- include the appropriate I2C driver for the selected CPU.
+- I2C Support: CONFIG_SYS_I2C
+
+ This enable the NEW i2c subsystem, and will allow you to use
+ i2c commands at the u-boot command line (as long as you set
+ CONFIG_CMD_I2C in CONFIG_COMMANDS) and communicate with i2c
+ based realtime clock chips or other i2c devices. See
+ common/cmd_i2c.c for a description of the command line
+ interface.
+
+ ported i2c driver to the new framework:
+ - drivers/i2c/soft_i2c.c:
+ - activate first bus with CONFIG_SYS_I2C_SOFT define
+ CONFIG_SYS_I2C_SOFT_SPEED and CONFIG_SYS_I2C_SOFT_SLAVE
+ for defining speed and slave address
+ - activate second bus with I2C_SOFT_DECLARATIONS2 define
+ CONFIG_SYS_I2C_SOFT_SPEED_2 and CONFIG_SYS_I2C_SOFT_SLAVE_2
+ for defining speed and slave address
+ - activate third bus with I2C_SOFT_DECLARATIONS3 define
+ CONFIG_SYS_I2C_SOFT_SPEED_3 and CONFIG_SYS_I2C_SOFT_SLAVE_3
+ for defining speed and slave address
+ - activate fourth bus with I2C_SOFT_DECLARATIONS4 define
+ CONFIG_SYS_I2C_SOFT_SPEED_4 and CONFIG_SYS_I2C_SOFT_SLAVE_4
+ for defining speed and slave address
+
+ - drivers/i2c/fsl_i2c.c:
+ - activate i2c driver with CONFIG_SYS_I2C_FSL
+ define CONFIG_SYS_FSL_I2C_OFFSET for setting the register
+ offset CONFIG_SYS_FSL_I2C_SPEED for the i2c speed and
+ CONFIG_SYS_FSL_I2C_SLAVE for the slave addr of the first
+ bus.
+ - If your board supports a second fsl i2c bus, define
+ CONFIG_SYS_FSL_I2C2_OFFSET for the register offset
+ CONFIG_SYS_FSL_I2C2_SPEED for the speed and
+ CONFIG_SYS_FSL_I2C2_SLAVE for the slave address of the
+ second bus.
+
+ - drivers/i2c/tegra_i2c.c:
+ - activate this driver with CONFIG_SYS_I2C_TEGRA
+ - This driver adds 4 i2c buses with a fix speed from
+ 100000 and the slave addr 0!
+
+ - drivers/i2c/ppc4xx_i2c.c
+ - activate this driver with CONFIG_SYS_I2C_PPC4XX
+ - CONFIG_SYS_I2C_PPC4XX_CH0 activate hardware channel 0
+ - CONFIG_SYS_I2C_PPC4XX_CH1 activate hardware channel 1
+
+ additional defines:
+
+ CONFIG_SYS_NUM_I2C_BUSES
+ Hold the number of i2c busses you want to use. If you
+ don't use/have i2c muxes on your i2c bus, this
+ is equal to CONFIG_SYS_NUM_I2C_ADAPTERS, and you can
+ omit this define.
+
+ CONFIG_SYS_I2C_DIRECT_BUS
+ define this, if you don't use i2c muxes on your hardware.
+ if CONFIG_SYS_I2C_MAX_HOPS is not defined or == 0 you can
+ omit this define.
+
+ CONFIG_SYS_I2C_MAX_HOPS
+ define how many muxes are maximal consecutively connected
+ on one i2c bus. If you not use i2c muxes, omit this
+ define.
+
+ CONFIG_SYS_I2C_BUSES
+ hold a list of busses you want to use, only used if
+ CONFIG_SYS_I2C_DIRECT_BUS is not defined, for example
+ a board with CONFIG_SYS_I2C_MAX_HOPS = 1 and
+ CONFIG_SYS_NUM_I2C_BUSES = 9:
+
+ CONFIG_SYS_I2C_BUSES {{0, {I2C_NULL_HOP}}, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 1}}}, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 2}}}, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 3}}}, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 4}}}, \
+ {0, {{I2C_MUX_PCA9547, 0x70, 5}}}, \
+ {1, {I2C_NULL_HOP}}, \
+ {1, {{I2C_MUX_PCA9544, 0x72, 1}}}, \
+ {1, {{I2C_MUX_PCA9544, 0x72, 2}}}, \
+ }
+
+ which defines
+ bus 0 on adapter 0 without a mux
+ bus 1 on adapter 0 with a PCA9547 on address 0x70 port 1
+ bus 2 on adapter 0 with a PCA9547 on address 0x70 port 2
+ bus 3 on adapter 0 with a PCA9547 on address 0x70 port 3
+ bus 4 on adapter 0 with a PCA9547 on address 0x70 port 4
+ bus 5 on adapter 0 with a PCA9547 on address 0x70 port 5
+ bus 6 on adapter 1 without a mux
+ bus 7 on adapter 1 with a PCA9544 on address 0x72 port 1
+ bus 8 on adapter 1 with a PCA9544 on address 0x72 port 2
+
+ If you do not have i2c muxes on your board, omit this define.
+
+- Legacy I2C Support: CONFIG_HARD_I2C
+
+ NOTE: It is intended to move drivers to CONFIG_SYS_I2C which
+ provides the following compelling advantages:
+
+ - more than one i2c adapter is usable
+ - approved multibus support
+ - better i2c mux support
+
+ ** Please consider updating your I2C driver now. **
+
+ These enable legacy I2C serial bus commands. Defining
+ CONFIG_HARD_I2C will include the appropriate I2C driver
+ for the selected CPU.
This will allow you to use i2c commands at the u-boot
command line (as long as you set CONFIG_CMD_I2C in
CONFIG_HARD_I2C selects a hardware I2C controller.
- CONFIG_SOFT_I2C configures u-boot to use a software (aka
- bit-banging) driver instead of CPM or similar hardware
- support for I2C.
-
There are several other quantities that must also be
- defined when you define CONFIG_HARD_I2C or CONFIG_SOFT_I2C.
+ defined when you define CONFIG_HARD_I2C.
In both cases you will need to define CONFIG_SYS_I2C_SPEED
to be the frequency (in Hz) at which you wish your i2c bus
That's all that's required for CONFIG_HARD_I2C.
- If you use the software i2c interface (CONFIG_SOFT_I2C)
+ If you use the software i2c interface (CONFIG_SYS_I2C_SOFT)
then the following macros need to be defined (examples are
from include/configs/lwmon.h):
I2C_READ
- Code that returns TRUE if the I2C data line is high,
- FALSE if it is low.
+ Code that returns true if the I2C data line is high,
+ false if it is low.
eg: #define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
I2C_SDA(bit)
- If <bit> is TRUE, sets the I2C data line high. If it
- is FALSE, it clears it (low).
+ If <bit> is true, sets the I2C data line high. If it
+ is false, it clears it (low).
eg: #define I2C_SDA(bit) \
if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \
I2C_SCL(bit)
- If <bit> is TRUE, sets the I2C clock line high. If it
- is FALSE, it clears it (low).
+ If <bit> is true, sets the I2C clock line high. If it
+ is false, it clears it (low).
eg: #define I2C_SCL(bit) \
if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
If not defined, then U-Boot uses predefined value for
specified DTT device.
- CONFIG_FSL_I2C
-
- Define this option if you want to use Freescale's I2C driver in
- drivers/i2c/fsl_i2c.c.
-
- CONFIG_I2C_MUX
-
- Define this option if you have I2C devices reached over 1 .. n
- I2C Muxes like the pca9544a. This option addes a new I2C
- Command "i2c bus [muxtype:muxaddr:muxchannel]" which adds a
- new I2C Bus to the existing I2C Busses. If you select the
- new Bus with "i2c dev", u-bbot sends first the commandos for
- the muxes to activate this new "bus".
-
- CONFIG_I2C_MULTI_BUS must be also defined, to use this
- feature!
-
- Example:
- Adding a new I2C Bus reached over 2 pca9544a muxes
- The First mux with address 70 and channel 6
- The Second mux with address 71 and channel 4
-
- => i2c bus pca9544a:70:6:pca9544a:71:4
-
- Use the "i2c bus" command without parameter, to get a list
- of I2C Busses with muxes:
-
- => i2c bus
- Busses reached over muxes:
- Bus ID: 2
- reached over Mux(es):
- pca9544a@70 ch: 4
- Bus ID: 3
- reached over Mux(es):
- pca9544a@70 ch: 6
- pca9544a@71 ch: 4
- =>
-
- If you now switch to the new I2C Bus 3 with "i2c dev 3"
- u-boot first sends the command to the mux@70 to enable
- channel 6, and then the command to the mux@71 to enable
- the channel 4.
-
- After that, you can use the "normal" i2c commands as
- usual to communicate with your I2C devices behind
- the 2 muxes.
-
- This option is actually implemented for the bitbanging
- algorithm in common/soft_i2c.c and for the Hardware I2C
- Bus on the MPC8260. But it should be not so difficult
- to add this option to other architectures.
-
CONFIG_SOFT_I2C_READ_REPEATED_START
defining this will force the i2c_read() function in
Define this option to include a destructive SPI flash
test ('sf test').
+ CONFIG_SPI_FLASH_BAR Ban/Extended Addr Reg
+
+ Define this option to use the Bank addr/Extended addr
+ support on SPI flashes which has size > 16Mbytes.
+
- SystemACE Support:
CONFIG_SYSTEMACE
Note: There is also a sha1sum command, which should perhaps
be deprecated in favour of 'hash sha1'.
+- Freescale i.MX specific commands:
+ CONFIG_CMD_HDMIDETECT
+ This enables 'hdmidet' command which returns true if an
+ HDMI monitor is detected. This command is i.MX 6 specific.
+
+ CONFIG_CMD_BMODE
+ This enables the 'bmode' (bootmode) command for forcing
+ a boot from specific media.
+
+ This is useful for forcing the ROM's usb downloader to
+ activate upon a watchdog reset which is nice when iterating
+ on U-Boot. Using the reset button or running bmode normal
+ will set it back to normal. This command currently
+ supports i.MX53 and i.MX6.
+
+- Signing support:
+ CONFIG_RSA
+
+ This enables the RSA algorithm used for FIT image verification
+ in U-Boot. See doc/uImage/signature for more information.
+
+ The signing part is build into mkimage regardless of this
+ option.
+
+
- Show boot progress:
CONFIG_SHOW_BOOT_PROGRESS
most specific compatibility entry of U-Boot's fdt's root node.
The order of entries in the configuration's fdt is ignored.
+ CONFIG_FIT_SIGNATURE
+ This option enables signature verification of FIT uImages,
+ using a hash signed and verified using RSA. See
+ doc/uImage.FIT/signature.txt for more details.
+
- Standalone program support:
CONFIG_STANDALONE_LOAD_ADDR
Adds the MTD partitioning infrastructure from the Linux
kernel. Needed for UBI support.
+- UBI support
+ CONFIG_CMD_UBI
+
+ Adds commands for interacting with MTD partitions formatted
+ with the UBI flash translation layer
+
+ Requires also defining CONFIG_RBTREE
+
+ CONFIG_UBI_SILENCE_MSG
+
+ Make the verbose messages from UBI stop printing. This leaves
+ warnings and errors enabled.
+
+- UBIFS support
+ CONFIG_CMD_UBIFS
+
+ Adds commands for interacting with UBI volumes formatted as
+ UBIFS. UBIFS is read-only in u-boot.
+
+ Requires UBI support as well as CONFIG_LZO
+
+ CONFIG_UBIFS_SILENCE_MSG
+
+ Make the verbose messages from UBIFS stop printing. This leaves
+ warnings and errors enabled.
+
- SPL framework
CONFIG_SPL
Enable building of SPL globally.
CONFIG_SPL_LDSCRIPT
LDSCRIPT for linking the SPL binary.
+ CONFIG_SPL_MAX_FOOTPRINT
+ Maximum size in memory allocated to the SPL, BSS included.
+ When defined, the linker checks that the actual memory
+ used by SPL from _start to __bss_end does not exceed it.
+ CONFIG_SPL_MAX_FOOTPRINT and CONFIG_SPL_BSS_MAX_SIZE
+ must not be both defined at the same time.
+
CONFIG_SPL_MAX_SIZE
- Maximum binary size (text, data and rodata) of the SPL binary.
+ Maximum size of the SPL image (text, data, rodata, and
+ linker lists sections), BSS excluded.
+ When defined, the linker checks that the actual size does
+ not exceed it.
CONFIG_SPL_TEXT_BASE
TEXT_BASE for linking the SPL binary.
Link address for the BSS within the SPL binary.
CONFIG_SPL_BSS_MAX_SIZE
- Maximum binary size of the BSS section of the SPL binary.
+ Maximum size in memory allocated to the SPL BSS.
+ When defined, the linker checks that the actual memory used
+ by SPL from __bss_start to __bss_end does not exceed it.
+ CONFIG_SPL_MAX_FOOTPRINT and CONFIG_SPL_BSS_MAX_SIZE
+ must not be both defined at the same time.
CONFIG_SPL_STACK
Adress of the start of the stack SPL will use
Address, size and partition on the MMC to load U-Boot from
when the MMC is being used in raw mode.
+ CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR
+ Sector to load kernel uImage from when MMC is being
+ used in raw mode (for Falcon mode)
+
+ CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR,
+ CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS
+ Sector and number of sectors to load kernel argument
+ parameters from when MMC is being used in raw mode
+ (for falcon mode)
+
CONFIG_SPL_FAT_SUPPORT
Support for fs/fat/libfat.o in SPL binary
CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME
Filename to read to load U-Boot when reading from FAT
+ CONFIG_SPL_FAT_LOAD_KERNEL_NAME
+ Filename to read to load kernel uImage when reading
+ from FAT (for Falcon mode)
+
+ CONFIG_SPL_FAT_LOAD_ARGS_NAME
+ Filename to read to load kernel argument parameters
+ when reading from FAT (for Falcon mode)
+
CONFIG_SPL_MPC83XX_WAIT_FOR_NAND
Set this for NAND SPL on PPC mpc83xx targets, so that
start.S waits for the rest of the SPL to load before
CONFIG_SPL_LIBGENERIC_SUPPORT
Support for lib/libgeneric.o in SPL binary
+ CONFIG_SPL_ENV_SUPPORT
+ Support for the environment operating in SPL binary
+
+ CONFIG_SPL_NET_SUPPORT
+ Support for the net/libnet.o in SPL binary.
+ It conflicts with SPL env from storage medium specified by
+ CONFIG_ENV_IS_xxx but CONFIG_ENV_IS_NOWHERE
+
CONFIG_SPL_PAD_TO
- Linker address to which the SPL should be padded before
- appending the SPL payload.
+ Image offset to which the SPL should be padded before appending
+ the SPL payload. By default, this is defined as
+ CONFIG_SPL_MAX_SIZE, or 0 if CONFIG_SPL_MAX_SIZE is undefined.
+ CONFIG_SPL_PAD_TO must be either 0, meaning to append the SPL
+ payload without any padding, or >= CONFIG_SPL_MAX_SIZE.
CONFIG_SPL_TARGET
Final target image containing SPL and payload. Some SPLs
use an arch-specific makefile fragment instead, for
example if more than one image needs to be produced.
+ CONFIG_FIT_SPL_PRINT
+ Printing information about a FIT image adds quite a bit of
+ code to SPL. So this is normally disabled in SPL. Use this
+ option to re-enable it. This will affect the output of the
+ bootm command when booting a FIT image.
+
Modem Support:
--------------
digits and dots. Recommended value: 45 (9..1) for 80
column displays, 15 (3..1) for 40 column displays.
+- CONFIG_FLASH_VERIFY
+ If defined, the content of the flash (destination) is compared
+ against the source after the write operation. An error message
+ will be printed when the contents are not identical.
+ Please note that this option is useless in nearly all cases,
+ since such flash programming errors usually are detected earlier
+ while unprotecting/erasing/programming. Please only enable
+ this option if you really know what you are doing.
+
- CONFIG_SYS_RX_ETH_BUFFER:
Defines the number of Ethernet receive buffers. On some
Ethernet controllers it is recommended to set this value
offset _bss_start_ofs from CONFIG_SYS_TEXT_BASE, rather than
directly. You should not need to touch this setting.
+- CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC (OMAP only)
+ This is set by OMAP boards for the max time that reset should
+ be asserted. See doc/README.omap-reset-time for details on how
+ the value can be calulated on a given board.
The following definitions that deal with the placement and management
of environment data (variable area); in general, we support the
I2C muxes, you can define here, how to reach this
EEPROM. For example:
- #define CONFIG_I2C_ENV_EEPROM_BUS "pca9547:70:d\0"
+ #define CONFIG_I2C_ENV_EEPROM_BUS 1
EEPROM which holds the environment, is reached over
a pca9547 i2c mux with address 0x70, channel 3.
environment. If redundant environment is used, it will be copied to
CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE.
+- CONFIG_ENV_IS_IN_UBI:
+
+ Define this if you have an UBI volume that you want to use for the
+ environment. This has the benefit of wear-leveling the environment
+ accesses, which is important on NAND.
+
+ - CONFIG_ENV_UBI_PART:
+
+ Define this to a string that is the mtd partition containing the UBI.
+
+ - CONFIG_ENV_UBI_VOLUME:
+
+ Define this to the name of the volume that you want to store the
+ environment in.
+
+ - CONFIG_ENV_UBI_VOLUME_REDUND:
+
+ Define this to the name of another volume to store a second copy of
+ the environment in. This will enable redundant environments in UBI.
+ It is assumed that both volumes are in the same MTD partition.
+
+ - CONFIG_UBI_SILENCE_MSG
+ - CONFIG_UBIFS_SILENCE_MSG
+
+ You will probably want to define these to avoid a really noisy system
+ when storing the env in UBI.
+
+- CONFIG_ENV_IS_IN_MMC:
+
+ Define this if you have an MMC device which you want to use for the
+ environment.
+
+ - CONFIG_SYS_MMC_ENV_DEV:
+
+ Specifies which MMC device the environment is stored in.
+
+ - CONFIG_SYS_MMC_ENV_PART (optional):
+
+ Specifies which MMC partition the environment is stored in. If not
+ set, defaults to partition 0, the user area. Common values might be
+ 1 (first MMC boot partition), 2 (second MMC boot partition).
+
+ - CONFIG_ENV_OFFSET:
+ - CONFIG_ENV_SIZE:
+
+ These two #defines specify the offset and size of the environment
+ area within the specified MMC device.
+
+ If offset is positive (the usual case), it is treated as relative to
+ the start of the MMC partition. If offset is negative, it is treated
+ as relative to the end of the MMC partition. This can be useful if
+ your board may be fitted with different MMC devices, which have
+ different sizes for the MMC partitions, and you always want the
+ environment placed at the very end of the partition, to leave the
+ maximum possible space before it, to store other data.
+
+ These two values are in units of bytes, but must be aligned to an
+ MMC sector boundary.
+
+ - CONFIG_ENV_OFFSET_REDUND (optional):
+
+ Specifies a second storage area, of CONFIG_ENV_SIZE size, used to
+ hold a redundant copy of the environment data. This provides a
+ valid backup copy in case the other copy is corrupted, e.g. due
+ to a power failure during a "saveenv" operation.
+
+ This value may also be positive or negative; this is handled in the
+ same way as CONFIG_ENV_OFFSET.
+
+ This value is also in units of bytes, but must also be aligned to
+ an MMC sector boundary.
+
+ - CONFIG_ENV_SIZE_REDUND (optional):
+
+ This value need not be set, even when CONFIG_ENV_OFFSET_REDUND is
+ set. If this value is set, it must be set to the same value as
+ CONFIG_ENV_SIZE.
+
- CONFIG_SYS_SPI_INIT_OFFSET
Defines offset to the initial SPI buffer area in DPRAM. The
a second time. Useful for platforms that are pre-booted
by coreboot or similar.
+- CONFIG_PCI_INDIRECT_BRIDGE:
+ Enable support for indirect PCI bridges.
+
- CONFIG_SYS_SRIO:
Chip has SRIO or not
- CONFIG_SRIO2:
Board has SRIO 2 port available
+- CONFIG_SRIO_PCIE_BOOT_MASTER
+ Board can support master function for Boot from SRIO and PCIE
+
- CONFIG_SYS_SRIOn_MEM_VIRT:
Virtual Address of SRIO port 'n' memory region
Defined to tell the NAND controller that the NAND chip is using
a 16 bit bus.
Not all NAND drivers use this symbol.
- Example of driver that uses it:
+ Example of drivers that use it:
- drivers/mtd/nand/ndfc.c
+ - drivers/mtd/nand/mxc_nand.c
- CONFIG_SYS_NDFC_EBC0_CFG
Sets the EBC0_CFG register for the NDFC. If not defined
that is executed before the actual U-Boot. E.g. when
compiling a NAND SPL.
+- CONFIG_SYS_MPC85XX_NO_RESETVEC
+ Only for 85xx systems. If this variable is specified, the section
+ .resetvec is not kept and the section .bootpg is placed in the
+ previous 4k of the .text section.
+
- CONFIG_ARCH_MAP_SYSMEM
Generally U-Boot (and in particular the md command) uses
effective address. It is therefore not necessary to regard
using the "bootz" command. The syntax of "bootz" command is the same
as the syntax of "bootm" command.
-Note, defining the CONFIG_SUPPORT_INITRD_RAW allows user to supply
+Note, defining the CONFIG_SUPPORT_RAW_INITRD allows user to supply
kernel with raw initrd images. The syntax is slightly different, the
address of the initrd must be augmented by it's size, in the following
format: "<initrd addres>:<initrd size>".