- OpenSSL 0.9.5-dev xx XXX 1999
+ OpenSSL 0.9.8h-dev
- Copyright (c) 1998-1999 The OpenSSL Project
+ Copyright (c) 1998-2007 The OpenSSL Project
Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson
All rights reserved.
The OpenSSL Project is a collaborative effort to develop a robust,
commercial-grade, fully featured, and Open Source toolkit implementing the
Secure Sockets Layer (SSL v2/v3) and Transport Layer Security (TLS v1)
- protocols with full-strength cryptography world-wide. The project is managed
- by a worldwide community of volunteers that use the Internet to communicate,
- plan, and develop the OpenSSL toolkit and its related documentation.
+ protocols as well as a full-strength general purpose cryptography library.
+ The project is managed by a worldwide community of volunteers that use the
+ Internet to communicate, plan, and develop the OpenSSL toolkit and its
+ related documentation.
OpenSSL is based on the excellent SSLeay library developed from Eric A. Young
and Tim J. Hudson. The OpenSSL toolkit is licensed under a dual-license (the
OpenSSL license plus the SSLeay license) situation, which basically means
that you are free to get and use it for commercial and non-commercial
- purposes as long as you fulfill the conditions of both licenses.
+ purposes as long as you fulfill the conditions of both licenses.
OVERVIEW
--------
actually logically part of it. It includes routines for the following:
Ciphers
- libdes - EAY's libdes DES encryption package which has been floating
- around the net for a few years. It includes 15
- 'modes/variations' of DES (1, 2 and 3 key versions of ecb,
- cbc, cfb and ofb; pcbc and a more general form of cfb and
- ofb) including desx in cbc mode, a fast crypt(3), and
- routines to read passwords from the keyboard.
+ libdes - EAY's libdes DES encryption package which was floating
+ around the net for a few years, and was then relicensed by
+ him as part of SSLeay. It includes 15 'modes/variations'
+ of DES (1, 2 and 3 key versions of ecb, cbc, cfb and ofb;
+ pcbc and a more general form of cfb and ofb) including desx
+ in cbc mode, a fast crypt(3), and routines to read
+ passwords from the keyboard.
RC4 encryption,
RC2 encryption - 4 different modes, ecb, cbc, cfb and ofb.
Blowfish encryption - 4 different modes, ecb, cbc, cfb and ofb.
MDC2 message digest. A DES based hash that is popular on smart cards.
Public Key
- RSA encryption/decryption/generation.
+ RSA encryption/decryption/generation.
There is no limit on the number of bits.
- DSA encryption/decryption/generation.
+ DSA encryption/decryption/generation.
There is no limit on the number of bits.
- Diffie-Hellman key-exchange/key generation.
+ Diffie-Hellman key-exchange/key generation.
There is no limit on the number of bits.
X.509v3 certificates
X509 encoding/decoding into/from binary ASN1 and a PEM
- based ascii-binary encoding which supports encryption with a
+ based ASCII-binary encoding which supports encryption with a
private key. Program to generate RSA and DSA certificate
requests and to generate RSA and DSA certificates.
A simple stack.
A Configuration loader that uses a format similar to MS .ini files.
- openssl:
- A command line tool which provides the following functions:
-
- enc - a general encryption program that can encrypt/decrypt using
- one of 17 different cipher/mode combinations. The
- input/output can also be converted to/from base64
- ascii encoding.
- dgst - a generate message digesting program that will generate
- message digests for any of md2, md5, sha (sha-0 or sha-1)
- or mdc2.
- asn1parse - parse and display the structure of an asn1 encoded
- binary file.
- rsa - Manipulate RSA private keys.
- dsa - Manipulate DSA private keys.
- dh - Manipulate Diffie-Hellman parameter files.
- dsaparam- Manipulate and generate DSA parameter files.
- crl - Manipulate certificate revocation lists.
- crt2pkcs7- Generate a pkcs7 object containing a crl and a certificate.
- x509 - Manipulate x509 certificates, self-sign certificates.
- req - Manipulate PKCS#10 certificate requests and also
- generate certificate requests.
- genrsa - Generates an arbitrary sized RSA private key.
- gendsa - Generates DSA parameters.
- gendh - Generates a set of Diffie-Hellman parameters, the prime
- will be a strong prime.
- ca - Create certificates from PKCS#10 certificate requests.
- This program also maintains a database of certificates
- issued.
- verify - Check x509 certificate signatures.
- speed - Benchmark OpenSSL's ciphers.
- s_server- A test SSL server.
- s_client- A test SSL client.
- s_time - Benchmark SSL performance of SSL server programs.
- errstr - Convert from OpenSSL hex error codes to a readable form.
- nseq - Netscape certificate sequence utility
-
+ openssl:
+ A command line tool that can be used for:
+ Creation of RSA, DH and DSA key parameters
+ Creation of X.509 certificates, CSRs and CRLs
+ Calculation of Message Digests
+ Encryption and Decryption with Ciphers
+ SSL/TLS Client and Server Tests
+ Handling of S/MIME signed or encrypted mail
+
+
PATENTS
-------
locations around the world. _YOU_ are responsible for ensuring that your use
of any algorithms is legal by checking if there are any patents in your
country. The file contains some of the patents that we know about or are
- rumoured to exist. This is not a definitive list.
+ rumored to exist. This is not a definitive list.
- RSA Data Security holds software patents on the RSA and RC5 algorithms. If
- their ciphers are used used inside the USA (and Japan?), you must contact RSA
- Data Security for licensing conditions. Their web page is
- http://www.rsa.com/.
+ RSA Security holds software patents on the RC5 algorithm. If you
+ intend to use this cipher, you must contact RSA Security for
+ licensing conditions. Their web page is http://www.rsasecurity.com/.
- RC4 is a trademark of RSA Data Security, so use of this label should perhaps
- only be used with RSA Data Security's permission.
+ RC4 is a trademark of RSA Security, so use of this label should perhaps
+ only be used with RSA Security's permission.
The IDEA algorithm is patented by Ascom in Austria, France, Germany, Italy,
- Japan, Netherlands, Spain, Sweden, Switzerland, UK and the USA. They should
- be contacted if that algorithm is to be used, their web page is
+ Japan, the Netherlands, Spain, Sweden, Switzerland, UK and the USA. They
+ should be contacted if that algorithm is to be used; their web page is
http://www.ascom.ch/.
+ The MDC2 algorithm is patented by IBM.
+
+ NTT and Mitsubishi have patents and pending patents on the Camellia
+ algorithm, but allow use at no charge without requiring an explicit
+ licensing agreement: http://info.isl.ntt.co.jp/crypt/eng/info/chiteki.html
+
INSTALLATION
------------
a Win32 platform, read the INSTALL.W32 file. For OpenVMS systems, read
INSTALL.VMS.
- For people in the USA, it is possible to compile OpenSSL to use RSA Inc.'s
- public key library, RSAREF, by configuring OpenSSL with the option "rsaref".
-
Read the documentation in the doc/ directory. It is quite rough, but it
- lists the functions, you will probably have to look at the code to work out
- how to used them. Look at the example programs.
+ lists the functions; you will probably have to look at the code to work out
+ how to use them. Look at the example programs.
+
+ PROBLEMS
+ --------
+
+ For some platforms, there are some known problems that may affect the user
+ or application author. We try to collect those in doc/PROBLEMS, with current
+ thoughts on how they should be solved in a future of OpenSSL.
- SUPPORT
+ SUPPORT
-------
If you have any problems with OpenSSL then please take the following steps
first:
+ - Download the current snapshot from ftp://ftp.openssl.org/snapshot/
+ to see if the problem has already been addressed
- Remove ASM versions of libraries
- - Remove compiler optimisation flags
- - Add compiler debug flags (if using gcc then remove -fomit-frame-pointer
- before you try to debug things)
+ - Remove compiler optimisation flags
If you wish to report a bug then please include the following information in
any bug report:
- OpenSSL Details
- - Version, most of these details can be got from the
- 'openssl version -a' command.
- Operating System Details
- - On Unix systems: Output of './config -t'
- - OS Name, Version
- - Hardware platform
- Compiler Details
- - Name
- - Version
- Application Details
- - Name
- - Version
- Problem Description
- - include steps that will reproduce the problem (if known)
- Stack Traceback (if the application dumps core)
-
- Report the bug to the OpenSSL project at:
+ - On Unix systems:
+ Self-test report generated by 'make report'
+ - On other systems:
+ OpenSSL version: output of 'openssl version -a'
+ OS Name, Version, Hardware platform
+ Compiler Details (name, version)
+ - Application Details (name, version)
+ - Problem Description (steps that will reproduce the problem, if known)
+ - Stack Traceback (if the application dumps core)
+
+ Report the bug to the OpenSSL project via the Request Tracker
+ (http://www.openssl.org/support/rt.html) by mail to:
openssl-bugs@openssl.org
+ Note that mail to openssl-bugs@openssl.org is recorded in the publicly
+ readable request tracker database and is forwarded to a public
+ mailing list. Confidential mail may be sent to openssl-security@openssl.org
+ (PGP key available from the key servers).
+
HOW TO CONTRIBUTE TO OpenSSL
----------------------------
Development is coordinated on the openssl-dev mailing list (see
http://www.openssl.org for information on subscribing). If you
- would like to submit a patch, send it to openssl-dev@openssl.org.
- Please be sure to include a textual explanation of what your patch
- does.
-
- The preferred format for changes is "diff -u" output. You might
+ would like to submit a patch, send it to openssl-dev@openssl.org with
+ the string "[PATCH]" in the subject. Please be sure to include a
+ textual explanation of what your patch does.
+
+ Note: For legal reasons, contributions from the US can be accepted only
+ if a TSU notification and a copy of the patch are sent to crypt@bis.doc.gov
+ (formerly BXA) with a copy to the ENC Encryption Request Coordinator;
+ please take some time to look at
+ http://www.bis.doc.gov/Encryption/PubAvailEncSourceCodeNofify.html [sic]
+ and
+ http://w3.access.gpo.gov/bis/ear/pdf/740.pdf (EAR Section 740.13(e))
+ for the details. If "your encryption source code is too large to serve as
+ an email attachment", they are glad to receive it by fax instead; hope you
+ have a cheap long-distance plan.
+
+ Our preferred format for changes is "diff -u" output. You might
generate it like this:
# cd openssl-work
# [your changes]
# ./Configure dist; make clean
# cd ..
- # diff -urN openssl-orig openssl-work > mydiffs.patch
+ # diff -ur openssl-orig openssl-work > mydiffs.patch
+