Examples:
U-Boot v2009.11 - Release November 2009
U-Boot v2009.11.1 - Release 1 in version November 2009 stable tree
- U-Boot v2010.09-rc1 - Release candiate 1 for September 2010 release
+ U-Boot v2010.09-rc1 - Release candidate 1 for September 2010 release
Directory Hierarchy:
Defines the string to utilize when trying to match PCIe device
tree nodes for the given platform.
- CONFIG_SYS_PPC_E500_DEBUG_TLB
-
- Enables a temporary TLB entry to be used during boot to work
- around limitations in e500v1 and e500v2 external debugger
- support. This reduces the portions of the boot code where
- breakpoints and single stepping do not work. The value of this
- symbol should be set to the TLB1 entry to be used for this
- purpose.
-
CONFIG_SYS_FSL_ERRATUM_A004510
Enables a workaround for erratum A004510. If set,
CONFIG_SYS_FSL_IFC_LE
Defines the IFC controller register space as Little Endian
+ CONFIG_SYS_FSL_IFC_CLK_DIV
+ Defines divider of platform clock(clock input to IFC controller).
+
+ CONFIG_SYS_FSL_LBC_CLK_DIV
+ Defines divider of platform clock(clock input to eLBC controller).
+
CONFIG_SYS_FSL_PBL_PBI
It enables addition of RCW (Power on reset configuration) in built image.
Please refer doc/README.pblimage for more details
Thumb2 this flag will result in Thumb2 code generated by
GCC.
- CONFIG_ARM_ERRATA_716044
- CONFIG_ARM_ERRATA_742230
- CONFIG_ARM_ERRATA_743622
- CONFIG_ARM_ERRATA_751472
- CONFIG_ARM_ERRATA_761320
- CONFIG_ARM_ERRATA_773022
- CONFIG_ARM_ERRATA_774769
- CONFIG_ARM_ERRATA_794072
-
- If set, the workarounds for these ARM errata are applied early
- during U-Boot startup. Note that these options force the
- workarounds to be applied; no CPU-type/version detection
- exists, unlike the similar options in the Linux kernel. Do not
- set these options unless they apply!
-
COUNTER_FREQUENCY
Generic timer clock source frequency.
different from COUNTER_FREQUENCY, and can only be determined
at run time.
- NOTE: The following can be machine specific errata. These
- do have ability to provide rudimentary version and machine
- specific checks, but expect no product checks.
- CONFIG_ARM_ERRATA_430973
- CONFIG_ARM_ERRATA_454179
- CONFIG_ARM_ERRATA_621766
- CONFIG_ARM_ERRATA_798870
- CONFIG_ARM_ERRATA_801819
-
- Tegra SoC options:
CONFIG_TEGRA_SUPPORT_NON_SECURE
port routines must be defined elsewhere
(i.e. serial_init(), serial_getc(), ...)
- CONFIG_CFB_CONSOLE
- Enables console device for a color framebuffer. Needs following
- defines (cf. smiLynxEM, i8042)
- VIDEO_FB_LITTLE_ENDIAN graphic memory organisation
- (default big endian)
- VIDEO_HW_RECTFILL graphic chip supports
- rectangle fill
- (cf. smiLynxEM)
- VIDEO_HW_BITBLT graphic chip supports
- bit-blit (cf. smiLynxEM)
- VIDEO_VISIBLE_COLS visible pixel columns
- (cols=pitch)
- VIDEO_VISIBLE_ROWS visible pixel rows
- VIDEO_PIXEL_SIZE bytes per pixel
- VIDEO_DATA_FORMAT graphic data format
- (0-5, cf. cfb_console.c)
- VIDEO_FB_ADRS framebuffer address
- VIDEO_KBD_INIT_FCT keyboard int fct
- (i.e. rx51_kp_init())
- VIDEO_TSTC_FCT test char fct
- (i.e. rx51_kp_tstc)
- VIDEO_GETC_FCT get char fct
- (i.e. rx51_kp_getc)
- CONFIG_VIDEO_LOGO display Linux logo in
- upper left corner
- CONFIG_VIDEO_BMP_LOGO use bmp_logo.h instead of
- linux_logo.h for logo.
- Requires CONFIG_VIDEO_LOGO
- CONFIG_CONSOLE_EXTRA_INFO
- additional board info beside
- the logo
- CONFIG_HIDE_LOGO_VERSION
- do not display bootloader
- version string
-
- When CONFIG_CFB_CONSOLE_ANSI is defined, console will support
- a limited number of ANSI escape sequences (cursor control,
- erase functions and limited graphics rendition control).
-
- When CONFIG_CFB_CONSOLE is defined, video console is
- default i/o. Serial console can be forced with
- environment 'console=serial'.
-
- When CONFIG_SILENT_CONSOLE is defined, all console
- messages (by U-Boot and Linux!) can be silenced with
- the "silent" environment variable. See
- doc/README.silent for more information.
-
- CONFIG_SYS_CONSOLE_BG_COL: define the backgroundcolor, default
- is 0x00.
- CONFIG_SYS_CONSOLE_FG_COL: define the foregroundcolor, default
- is 0xa0.
-
- Console Baudrate:
CONFIG_BAUDRATE - in bps
Select one of the baudrates listed in
must be defined, to setup the maximum idle timeout for
the SMC.
-- Pre-Console Buffer:
- Prior to the console being initialised (i.e. serial UART
- initialised etc) all console output is silently discarded.
- Defining CONFIG_PRE_CONSOLE_BUFFER will cause U-Boot to
- buffer any console messages prior to the console being
- initialised to a buffer of size CONFIG_PRE_CON_BUF_SZ
- bytes located at CONFIG_PRE_CON_BUF_ADDR. The buffer is
- a circular buffer, so if more than CONFIG_PRE_CON_BUF_SZ
- bytes are output before the console is initialised, the
- earlier bytes are discarded.
-
- Note that when printing the buffer a copy is made on the
- stack so CONFIG_PRE_CON_BUF_SZ must fit on the stack.
-
- 'Sane' compilers will generate smaller code if
- CONFIG_PRE_CON_BUF_SZ is a power of 2
-
- Autoboot Command:
CONFIG_BOOTCOMMAND
Only needed when CONFIG_BOOTDELAY is enabled;
- PWM Support:
CONFIG_PWM_IMX
- Support for PWM modul on the imx6.
+ Support for PWM module on the imx6.
- TPM Support:
CONFIG_TPM
CONFIG_SH_MMCIF_CLK
Define the clock frequency for MMCIF
- CONFIG_GENERIC_MMC
- Enable the generic MMC driver
-
CONFIG_SUPPORT_EMMC_BOOT
Enable some additional features of the eMMC boot partitions.
This will also enable the command "fatwrite" enabling the
user to write files to FAT.
-CBFS (Coreboot Filesystem) support
+- CBFS (Coreboot Filesystem) support:
CONFIG_CMD_CBFS
Define this to enable support for reading from a Coreboot
instead.
- Video support:
- CONFIG_VIDEO
-
- Define this to enable video support (for output to
- video).
-
- CONFIG_VIDEO_CT69000
-
- Enable Chips & Technologies 69000 Video chip
-
- CONFIG_VIDEO_SMI_LYNXEM
- Enable Silicon Motion SMI 712/710/810 Video chip. The
- video output is selected via environment 'videoout'
- (1 = LCD and 2 = CRT). If videoout is undefined, CRT is
- assumed.
-
- For the CT69000 and SMI_LYNXEM drivers, videomode is
- selected via environment 'videomode'. Two different ways
- are possible:
- - "videomode=num" 'num' is a standard LiLo mode numbers.
- Following standard modes are supported (* is default):
-
- Colors 640x480 800x600 1024x768 1152x864 1280x1024
- -------------+---------------------------------------------
- 8 bits | 0x301* 0x303 0x305 0x161 0x307
- 15 bits | 0x310 0x313 0x316 0x162 0x319
- 16 bits | 0x311 0x314 0x317 0x163 0x31A
- 24 bits | 0x312 0x315 0x318 ? 0x31B
- -------------+---------------------------------------------
- (i.e. setenv videomode 317; saveenv; reset;)
-
- - "videomode=bootargs" all the video parameters are parsed
- from the bootargs. (See drivers/video/videomodes.c)
-
-
- CONFIG_VIDEO_SED13806
- Enable Epson SED13806 driver. This driver supports 8bpp
- and 16bpp modes defined by CONFIG_VIDEO_SED13806_8BPP
- or CONFIG_VIDEO_SED13806_16BPP
-
CONFIG_FSL_DIU_FB
Enable the Freescale DIU video driver. Reference boards for
SOCs that have a DIU should define this macro to enable DIU
here, since it is cheaper to change data cache settings on
a per-section basis.
- CONFIG_CONSOLE_SCROLL_LINES
-
- When the console need to be scrolled, this is the number of
- lines to scroll by. It defaults to 1. Increasing this makes
- the console jump but can help speed up operation when scrolling
- is slow.
CONFIG_LCD_ROTATION
can be displayed via the splashscreen support or the
bmp command.
-- Do compressing for memory range:
- CONFIG_CMD_ZIP
-
- If this option is set, it would use zlib deflate method
- to compress the specified memory at its best effort.
-
- Compression support:
CONFIG_GZIP
A byte containing the id of the VLAN.
-- Status LED: CONFIG_STATUS_LED
+- Status LED: CONFIG_LED_STATUS
Several configurations allow to display the current
status using a LED. For instance, the LED will blink
soon as a reply to a BOOTP request was received, and
start blinking slow once the Linux kernel is running
(supported by a status LED driver in the Linux
- kernel). Defining CONFIG_STATUS_LED enables this
+ kernel). Defining CONFIG_LED_STATUS enables this
feature in U-Boot.
Additional options:
- CONFIG_GPIO_LED
+ CONFIG_LED_STATUS_GPIO
The status LED can be connected to a GPIO pin.
In such cases, the gpio_led driver can be used as a
- status LED backend implementation. Define CONFIG_GPIO_LED
+ status LED backend implementation. Define CONFIG_LED_STATUS_GPIO
to include the gpio_led driver in the U-Boot binary.
CONFIG_GPIO_LED_INVERTED_TABLE
this is instead controlled by the value of
/config/load-environment.
-- Parallel Flash support:
- CONFIG_SYS_NO_FLASH
-
- Traditionally U-Boot was run on systems with parallel NOR
- flash. This option is used to disable support for parallel NOR
- flash. This option should be defined if the board does not have
- parallel flash.
-
- If this option is not defined one of the generic flash drivers
- (e.g. CONFIG_FLASH_CFI_DRIVER or CONFIG_ST_SMI) must be
- selected or the board must provide an implementation of the
- flash API (see include/flash.h).
-
- DataFlash Support:
CONFIG_HAS_DATAFLASH
CONFIG_SPL_INIT_MINIMAL
Arch init code should be built for a very small image
- CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR,
- CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS,
- Address and partition on the MMC to load U-Boot from
- when the MMC is being used in raw mode.
-
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
Partition on the MMC to load U-Boot from when the MMC is being
used in raw mode
- CONFIG_SYS_BAUDRATE_TABLE:
List of legal baudrate settings for this board.
-- CONFIG_SYS_CONSOLE_INFO_QUIET
- Suppress display of console information at boot.
-
-- CONFIG_SYS_CONSOLE_IS_IN_ENV
- If the board specific function
- extern int overwrite_console (void);
- returns 1, the stdin, stderr and stdout are switched to the
- serial port, else the settings in the environment are used.
-
-- CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
- Enable the call to overwrite_console().
-
-- CONFIG_SYS_CONSOLE_ENV_OVERWRITE
- Enable overwrite of previous console environment settings.
-
- CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END:
Begin and End addresses of the area used by the
simple memory test.
Define this to a string that is the name of the block device.
- - FAT_ENV_DEV_AND_PART:
+ - FAT_ENV_DEVICE_AND_PART:
Define this to a string to specify the partition of the device. It can
be as following:
enable SPI microcode relocation patch (MPC8xx);
define relocation offset in DPRAM [SCC4]
-- CONFIG_SYS_USE_OSCCLK:
- Use OSCM clock mode on MBX8xx board. Be careful,
- wrong setting might damage your board. Read
- doc/README.MBX before setting this variable!
-
- CONFIG_SYS_CPM_POST_WORD_ADDR: (MPC8xx, MPC8260 only)
Offset of the bootmode word in DPRAM used by post
(Power On Self Tests). This definition overrides
addressable memory. This option causes some memory accesses
to be mapped through map_sysmem() / unmap_sysmem().
-- CONFIG_USE_ARCH_MEMCPY
- CONFIG_USE_ARCH_MEMSET
- If these options are used a optimized version of memcpy/memset will
- be used if available. These functions may be faster under some
- conditions but may increase the binary size.
-
- CONFIG_X86_RESET_VECTOR
If defined, the x86 reset vector code is included. This is not
needed when U-Boot is running from Coreboot.