add c structures for SoC access

[oweals/u-boot.git] / README

diff --git a/README b/README
index 8047c778887051693fda45a41be5c6b63b433aad..1158e24de776b4f1ad01c987c6200855a1d77424 100644 (file)
--- a/README
+++ b/README
@@ -777,7 +777,7 @@ The following options need to be configured:
                CONFIG_LBA48
 
                Set this to enable support for disks larger than 137GB
-               Also look at CONFIG_SYS_64BIT_LBA ,CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
+               Also look at CONFIG_SYS_64BIT_LBA.
                Whithout these , LBA48 support uses 32bit variables and will 'only'
                support disks up to 2.1TB.
 
@@ -822,6 +822,16 @@ The following options need to be configured:
 
 - NETWORK Support (other):
 
+               CONFIG_DRIVER_AT91EMAC
+               Support for AT91RM9200 EMAC.
+
+                       CONFIG_RMII
+                       Define this to use reduced MII inteface
+
+                       CONFIG_DRIVER_AT91EMAC_QUIET
+                       If this defined, the driver is quiet.
+                       The driver doen't show link status messages.
+
                CONFIG_DRIVER_LAN91C96
                Support for SMSC's LAN91C96 chips.
 
@@ -846,20 +856,20 @@ The following options need to be configured:
                        Define this to use i/o functions instead of macros
                        (some hardware wont work with macros)
 
-               CONFIG_DRIVER_SMC911X
+               CONFIG_SMC911X
                Support for SMSC's LAN911x and LAN921x chips
 
-                       CONFIG_DRIVER_SMC911X_BASE
+                       CONFIG_SMC911X_BASE
                        Define this to hold the physical address
                        of the device (I/O space)
 
-                       CONFIG_DRIVER_SMC911X_32_BIT
+                       CONFIG_SMC911X_32_BIT
                        Define this if data bus is 32 bits
 
-                       CONFIG_DRIVER_SMC911X_16_BIT
+                       CONFIG_SMC911X_16_BIT
                        Define this if data bus is 16 bits. If your processor
                        automatically converts one 32 bit word to two 16 bit
-                       words you may also try CONFIG_DRIVER_SMC911X_32_BIT.
+                       words you may also try CONFIG_SMC911X_32_BIT.
 
 - USB Support:
                At the moment only the UHCI host controller is
@@ -2447,6 +2457,19 @@ to save the current settings.
        - CONFIG_SYS_EEPROM_SIZE:
          The size in bytes of the EEPROM device.
 
+       - CONFIG_ENV_EEPROM_IS_ON_I2C
+         define this, if you have I2C and SPI activated, and your
+         EEPROM, which holds the environment, is on the I2C bus.
+
+       - CONFIG_I2C_ENV_EEPROM_BUS
+         if you have an Environment on an EEPROM reached over
+         I2C muxes, you can define here, how to reach this
+         EEPROM. For example:
+
+         #define CONFIG_I2C_ENV_EEPROM_BUS       "pca9547:70:d\0"
+
+         EEPROM which holds the environment, is reached over
+         a pca9547 i2c mux with address 0x70, channel 3.
 
 - CONFIG_ENV_IS_IN_DATAFLASH:
 
@@ -2524,13 +2547,6 @@ use the "saveenv" command to store a valid environment.
 - CONFIG_SYS_FAULT_MII_ADDR:
                MII address of the PHY to check for the Ethernet link state.
 
-- CONFIG_SYS_64BIT_VSPRINTF:
-               Makes vsprintf (and all *printf functions) support printing
-               of 64bit values by using the L quantifier
-
-- CONFIG_SYS_64BIT_STRTOUL:
-               Adds simple_strtoull that returns a 64bit value
-
 - CONFIG_NS16550_MIN_FUNCTIONS:
                Define this if you desire to only have use of the NS16550_init
                and NS16550_putc functions for the serial driver located at
@@ -3916,7 +3932,9 @@ For PowerPC, the following registers have specific use:
        R30:    GOT pointer
        R31:    frame pointer
 
-       (U-Boot also uses R14 as internal GOT pointer.)
+       (U-Boot also uses R12 as internal GOT pointer. r12
+       is a volatile register so r12 needs to be reset when
+       going back and forth between asm and C)
 
     ==> U-Boot will use R2 to hold a pointer to the global data