CONFIGURE_ARGS=
SHLIB_TARGET=
+# HERE indicates where this Makefile lives. This can be used to indicate
+# where sub-Makefiles are expected to be. Currently has very limited usage,
+# and should probably not be bothered with at all.
+HERE=.
+
# INSTALL_PREFIX is for package builders so that they can configure
# for, say, /usr/ and yet have everything installed to /tmp/somedir/usr/.
# Normally it is left empty.
# equal 4.
# PKCS1_CHECK - pkcs1 tests.
-CC= gcc
-#CFLAG= -DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall -Wuninitialized -DSHA1_ASM -DMD5_ASM -DRMD160_ASM
-CFLAG= -DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall -DSHA1_ASM -DMD5_ASM -DRMD160_ASM
+CC= cc
+CFLAG= -O
DEPFLAG=
PEX_LIBS=
EX_LIBS=
EXE_EXT=
-AR=ar r
+ARFLAGS=
+AR=ar $(ARFLAGS) r
RANLIB= ranlib
PERL= perl
TAR= tar
TARFLAGS= --no-recursion
MAKEDEPPROG=makedepend
-# Set BN_ASM to bn_asm.o if you want to use the C version
-BN_ASM= bn_asm.o
-#BN_ASM= bn_asm.o
-#BN_ASM= asm/bn86-elf.o # elf, linux-elf
-#BN_ASM= asm/bn86-sol.o # solaris
-#BN_ASM= asm/bn86-out.o # a.out, FreeBSD
-#BN_ASM= asm/bn86bsdi.o # bsdi
-#BN_ASM= asm/alpha.o # DEC Alpha
-#BN_ASM= asm/pa-risc2.o # HP-UX PA-RISC
-#BN_ASM= asm/r3000.o # SGI MIPS cpu
-#BN_ASM= asm/sparc.o # Sun solaris/SunOS
-#BN_ASM= asm/bn-win32.o # Windows 95/NT
-#BN_ASM= asm/x86w16.o # 16 bit code for Windows 3.1/DOS
-#BN_ASM= asm/x86w32.o # 32 bit code for Windows 3.1
+# We let the C compiler driver to take care of .s files. This is done in
+# order to be excused from maintaining a separate set of architecture
+# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
+# gcc, then the driver will automatically translate it to -xarch=v8plus
+# and pass it down to assembler.
+AS=$(CC) -c
+ASFLAG=$(CFLAG)
# For x86 assembler: Set PROCESSOR to 386 if you want to support
# the 80386.
PROCESSOR=
-# Set DES_ENC to des_enc.o if you want to use the C version
-#There are 4 x86 assember options.
-DES_ENC= asm/dx86-out.o asm/yx86-out.o
-#DES_ENC= des_enc.o fcrypt_b.o # C
-#DES_ENC= asm/dx86-elf.o asm/yx86-elf.o # elf
-#DES_ENC= asm/dx86-sol.o asm/yx86-sol.o # solaris
-#DES_ENC= asm/dx86-out.o asm/yx86-out.o # a.out, FreeBSD
-#DES_ENC= asm/dx86bsdi.o asm/yx86bsdi.o # bsdi
-
-# Set BF_ENC to bf_enc.o if you want to use the C version
-#There are 4 x86 assember options.
-BF_ENC= asm/bx86-out.o
-#BF_ENC= bf_enc.o
-#BF_ENC= asm/bx86-elf.o # elf
-#BF_ENC= asm/bx86-sol.o # solaris
-#BF_ENC= asm/bx86-out.o # a.out, FreeBSD
-#BF_ENC= asm/bx86bsdi.o # bsdi
-
-# Set CAST_ENC to c_enc.o if you want to use the C version
-#There are 4 x86 assember options.
-CAST_ENC= asm/cx86-out.o
-#CAST_ENC= c_enc.o
-#CAST_ENC= asm/cx86-elf.o # elf
-#CAST_ENC= asm/cx86-sol.o # solaris
-#CAST_ENC= asm/cx86-out.o # a.out, FreeBSD
-#CAST_ENC= asm/cx86bsdi.o # bsdi
-
-# Set RC4_ENC to rc4_enc.o if you want to use the C version
-#There are 4 x86 assember options.
-RC4_ENC= asm/rx86-out.o
-#RC4_ENC= rc4_enc.o
-#RC4_ENC= asm/rx86-elf.o # elf
-#RC4_ENC= asm/rx86-sol.o # solaris
-#RC4_ENC= asm/rx86-out.o # a.out, FreeBSD
-#RC4_ENC= asm/rx86bsdi.o # bsdi
-
-# Set RC5_ENC to rc5_enc.o if you want to use the C version
-#There are 4 x86 assember options.
-RC5_ENC= asm/r586-out.o
-#RC5_ENC= rc5_enc.o
-#RC5_ENC= asm/r586-elf.o # elf
-#RC5_ENC= asm/r586-sol.o # solaris
-#RC5_ENC= asm/r586-out.o # a.out, FreeBSD
-#RC5_ENC= asm/r586bsdi.o # bsdi
-
-# Also need MD5_ASM defined
-MD5_ASM_OBJ= asm/mx86-out.o
-#MD5_ASM_OBJ= asm/mx86-elf.o # elf
-#MD5_ASM_OBJ= asm/mx86-sol.o # solaris
-#MD5_ASM_OBJ= asm/mx86-out.o # a.out, FreeBSD
-#MD5_ASM_OBJ= asm/mx86bsdi.o # bsdi
-
-# Also need SHA1_ASM defined
-SHA1_ASM_OBJ= asm/sx86-out.o
-#SHA1_ASM_OBJ= asm/sx86-elf.o # elf
-#SHA1_ASM_OBJ= asm/sx86-sol.o # solaris
-#SHA1_ASM_OBJ= asm/sx86-out.o # a.out, FreeBSD
-#SHA1_ASM_OBJ= asm/sx86bsdi.o # bsdi
-
-# Also need RMD160_ASM defined
-RMD160_ASM_OBJ= asm/rm86-out.o
-#RMD160_ASM_OBJ= asm/rm86-elf.o # elf
-#RMD160_ASM_OBJ= asm/rm86-sol.o # solaris
-#RMD160_ASM_OBJ= asm/rm86-out.o # a.out, FreeBSD
-#RMD160_ASM_OBJ= asm/rm86bsdi.o # bsdi
+# CPUID module collects small commonly used assembler snippets
+CPUID_OBJ=
+BN_ASM= bn_asm.o
+DES_ENC= des_enc.o fcrypt_b.o
+AES_ASM_OBJ=aes_core.o aes_cbc.o
+BF_ENC= bf_enc.o
+CAST_ENC= c_enc.o
+RC4_ENC= rc4_enc.o
+RC5_ENC= rc5_enc.o
+MD5_ASM_OBJ=
+SHA1_ASM_OBJ=
+RMD160_ASM_OBJ=
# KRB5 stuff
KRB5_INCLUDES=
LIBKRB5=
-# When we're prepared to use shared libraries in the programs we link here
-# we might set SHLIB_MARK to '$(SHARED_LIBS)'.
-SHLIB_MARK=
-
-DIRS= crypto ssl $(SHLIB_MARK) apps test tools
+DIRS= crypto ssl engines apps test tools
SHLIBDIRS= crypto ssl
# dirs in crypto to build
SDIRS= \
+ objects \
md2 md4 md5 sha mdc2 hmac ripemd \
- des rc2 rc4 rc5 idea bf cast \
- bn ec rsa dsa dh dso engine rijndael \
- buffer bio stack lhash rand err objects \
- evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5
+ des aes rc2 rc4 rc5 idea bf cast \
+ bn ec rsa dsa ecdsa dh ecdh dso engine \
+ buffer bio stack lhash rand err \
+ evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \
+ store pqueue
# tests to perform. "alltests" is a special word indicating that all tests
# should be performed.
TESTS = alltests
-MAKEFILE= Makefile.ssl
-MAKE= make -f Makefile.ssl
+MAKEFILE= Makefile
MANDIR=$(OPENSSLDIR)/man
MAN1=1
MAN3=3
+MANSUFFIX=
SHELL=/bin/sh
TOP= .
SHARED_SSL=libssl$(SHLIB_EXT)
SHARED_LIBS=
SHARED_LIBS_LINK_EXTS=
+SHARED_LDFLAGS=
GENERAL= Makefile
BASENAME= openssl
EXHEADER= e_os2.h
HEADER= e_os.h
-# When we're prepared to use shared libraries in the programs we link here
-# we might remove 'clean-shared' from the targets to perform at this stage
-
-all: clean-shared Makefile.ssl sub_all
-
-sub_all:
- @for i in $(DIRS); \
- do \
- if [ -d "$$i" ]; then \
- (cd $$i && echo "making all in $$i..." && \
- $(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PROCESSOR='${PROCESSOR}' PERL='${PERL}' RANLIB='${RANLIB}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' all ) || exit 1; \
+all: Makefile build_all openssl.pc
+
+BUILDENV= PLATFORM='${PLATFORM}' PROCESSOR='${PROCESSOR}' \
+ CC='${CC}' CFLAG='${CFLAG}' \
+ AS='${CC}' ASFLAG='${CFLAG} -c' \
+ AR='${AR}' PERL='${PERL}' RANLIB='${RANLIB}' \
+ SDIRS='${SDIRS}' LIBRPATH='${INSTALLTOP}/lib' \
+ INSTALLTOP='${INSTALLTOP}' OPENSSLDIR='${OPENSSLDIR}' \
+ MAKEDEPEND='$${TOP}/util/domd $${TOP} -MD ${MAKEDEPPROG}'\
+ DEPFLAG='-DOPENSSL_NO_DEPRECATED ${DEPFLAG}' \
+ MAKEDEPPROG='${MAKEDEPPROG}' \
+ LDFLAGS='${LDFLAGS}' SHARED_LDFLAGS='${SHARED_LDFLAGS}' \
+ KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' \
+ EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' \
+ SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' \
+ PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' \
+ CPUID_OBJ='${CPUID_OBJ}' \
+ BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' \
+ AES_ASM_OBJ='${AES_ASM_OBJ}' \
+ BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' \
+ RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' \
+ SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' \
+ MD5_ASM_OBJ='${MD5_ASM_OBJ}' \
+ RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' \
+ THIS=$${THIS:-$@}
+
+BUILD_CMD=if echo " $(DIRS) " | grep " $$dir " >/dev/null 2>/dev/null; then \
+ if [ -d "$$dir" ]; then \
+ (cd $$dir && echo "making $$target in $$dir..." && \
+ $(MAKE) $(BUILDENV) BUILDENV="$(BUILDENV)" $$target ) || exit 1; \
else \
- $(MAKE) $$i; \
- fi; \
- done; \
- if echo "$(DIRS)" | \
- egrep '(^| )(crypto|ssl)( |$$)' > /dev/null 2>&1 && \
- [ -n "$(SHARED_LIBS)" ]; then \
- $(MAKE) $(SHARED_LIBS); \
- fi
+ $(MAKE) $$dir; \
+ fi; fi
+
+reflect:
+ @[ -n "$(THIS)" ] && $(MAKE) $(THIS) $(BUILDENV)
+
+sub_all: build_all
+build_all: build_libs build_apps build_tests build_tools
+
+build_libs: build_crypto build_ssl build_engines
+
+build_crypto:
+ @dir=crypto; target=all; $(BUILD_CMD)
+build_ssl:
+ @dir=ssl; target=all; $(BUILD_CMD)
+build_engines:
+ @dir=engines; target=all; $(BUILD_CMD)
+build_apps:
+ @dir=apps; target=all; $(BUILD_CMD)
+build_tests:
+ @dir=test; target=all; $(BUILD_CMD)
+build_tools:
+ @dir=tools; target=all; $(BUILD_CMD)
+
+all_testapps: build_libs build_testapps
+build_testapps:
+ @dir=crypto; target=testapps; $(BUILD_CMD)
libcrypto$(SHLIB_EXT): libcrypto.a
@if [ "$(SHLIB_TARGET)" != "" ]; then \
$(MAKE) SHLIBDIRS=crypto build-shared; \
else \
echo "There's no support for shared libraries on this platform" >&2; \
+ exit 1; \
fi
+
libssl$(SHLIB_EXT): libcrypto$(SHLIB_EXT) libssl.a
@if [ "$(SHLIB_TARGET)" != "" ]; then \
$(MAKE) SHLIBDIRS=ssl SHLIBDEPS='-lcrypto' build-shared; \
else \
echo "There's no support for shared libraries on this platform" >&2; \
+ exit 1; \
fi
clean-shared:
- @for i in $(SHLIBDIRS); do \
+ @set -e; for i in $(SHLIBDIRS); do \
if [ -n "$(SHARED_LIBS_LINK_EXTS)" ]; then \
tmp="$(SHARED_LIBS_LINK_EXTS)"; \
for j in $${tmp:-x}; do \
done; \
fi; \
( set -x; rm -f lib$$i$(SHLIB_EXT) ); \
- done
-
-link-shared:
- @for i in $(SHLIBDIRS); do \
- prev=lib$$i$(SHLIB_EXT); \
- if [ -n "$(SHARED_LIBS_LINK_EXTS)" ]; then \
- tmp="$(SHARED_LIBS_LINK_EXTS)"; \
- for j in $${tmp:-x}; do \
- ( set -x; ln -f -s $$prev lib$$i$$j ); \
- prev=lib$$i$$j; \
- done; \
+ if [ "$(PLATFORM)" = "Cygwin" ]; then \
+ ( set -x; rm -f cyg$$i$(SHLIB_EXT) lib$$i$(SHLIB_EXT).a ); \
fi; \
done
-build-shared: clean-shared do_$(SHLIB_TARGET) link-shared
-
-do_bsd-gcc-shared: do_gnu-shared
-do_linux-shared: do_gnu-shared
-do_gnu-shared:
- libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
- ( set -x; ${CC} -shared -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
- -Wl,-soname=lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
- -Wl,--whole-archive lib$$i.a \
- -Wl,--no-whole-archive $$libs ${EX_LIBS} -lc ) || exit 1; \
- libs="$$libs -l$$i"; \
- done
-
-# This assumes that GNU utilities are *not* used
-do_alpha-osf1-shared:
- libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
- ( set -x; ${CC} -shared -o lib$$i.so \
- -set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}" \
- -all lib$$i.a -none $$libs ${EX_LIBS} -lc ) || exit 1; \
- libs="$$libs -l$$i"; \
- done
-
-# This assumes that GNU utilities are *not* used
-# The difference between alpha-osf1-shared and tru64-shared is the `-msym'
-# option passed to the linker.
-do_tru64-shared:
- libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
- ( set -x; ${CC} -shared -msym -o lib$$i.so \
- -set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}" \
- -all lib$$i.a -none $$libs ${EX_LIBS} -lc ) || exit 1; \
- libs="$$libs -l$$i"; \
- done
-
-# This assumes that GNU utilities are *not* used
-# The difference between tru64-shared and tru64-shared-rpath is the
-# -rpath ${INSTALLTOP}/lib passed to the linker.
-do_tru64-shared-rpath:
- libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
- ( set -x; ${CC} -shared -msym -o lib$$i.so \
- -rpath ${INSTALLTOP}/lib \
- -set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}" \
- -all lib$$i.a -none $$libs ${EX_LIBS} -lc ) || exit 1; \
- libs="$$libs -l$$i"; \
- done
-
-
-# This assumes that GNU utilities are *not* used
-do_solaris-shared:
- libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
- ( PATH=/usr/ccs/bin:$$PATH ; export PATH; \
- set -x; ${CC} -G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
- -h lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
- -z allextract lib$$i.a $$libs ${EX_LIBS} -lc ) || exit 1; \
- libs="$$libs -l$$i"; \
- done
-
-# UnixWare 7 and OpenUNIX 8 native compilers used
-do_svr5-shared:
- libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
- touch lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
- ( PATH=/usr/ccs/bin:$$PATH ; export PATH; \
- set -x; ${CC} -G -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
- -h lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
- -z allextract lib$$i.a $$libs ${EX_LIBS} ) || exit 1; \
- libs="$$libs -l$$i"; \
- done
-
-# This assumes that GNU utilities are *not* used
-do_irix-shared:
- libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
- ( set -x; ${CC} -shared -o lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
- -Wl,-soname,lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
- -all lib$$i.a $$libs ${EX_LIBS} -lc) || exit 1; \
- libs="$$libs -l$$i"; \
- done
-
-# This assumes that GNU utilities are *not* used
-# HP-UX includes the full pathname of libs we depend on, so we would get
-# ./libcrypto (with ./ as path information) compiled into libssl, hence
-# we omit the SHLIBDEPS. Applications must be linked with -lssl -lcrypto
-# anyway.
-# The object modules are loaded from lib$i.a using the undocumented -Fl
-# option.
-#
-# WARNING: Until DSO is fixed to support a search path, we support SHLIB_PATH
-# by temporarily specifying "+s"!
-#
-do_hpux-shared:
- for i in ${SHLIBDIRS}; do \
- ( set -x; /usr/ccs/bin/ld +vnocompatwarnings \
- -b -z +s \
- -o lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR} \
- +h lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR} \
- -Fl lib$$i.a -ldld -lc ) || exit 1; \
+link-shared:
+ @ set -e; for i in ${SHLIBDIRS}; do \
+ $(MAKE) -f $(HERE)/Makefile.shared \
+ LIBNAME=$$i LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \
+ LIBCOMPATVERSIONS=";${SHLIB_VERSION_HISTORY}" \
+ symlink.$(SHLIB_TARGET); \
+ libs="$$libs -l$$i"; \
done
-# This assumes that GNU utilities are *not* used
-# HP-UX includes the full pathname of libs we depend on, so we would get
-# ./libcrypto (with ./ as path information) compiled into libssl, hence
-# we omit the SHLIBDEPS. Applications must be linked with -lssl -lcrypto
-# anyway.
-#
-# HP-UX in 64bit mode has "+s" enabled by default; it will search for
-# shared libraries along LD_LIBRARY_PATH _and_ SHLIB_PATH.
-#
-do_hpux64-shared:
- for i in ${SHLIBDIRS}; do \
- ( set -x; /usr/ccs/bin/ld -b -z \
- -o lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR} \
- +h lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR} \
- +forceload lib$$i.a -ldl -lc ) || exit 1; \
- done
+build-shared: do_$(SHLIB_TARGET) link-shared
-# The following method is said to work on all platforms. Tests will
-# determine if that's how it's gong to be used.
-# This assumes that for all but GNU systems, GNU utilities are *not* used.
-# ALLSYMSFLAGS would be:
-# GNU systems: --whole-archive
-# Tru64 Unix: -all
-# Solaris: -z allextract
-# Irix: -all
-# HP/UX-32bit: -Fl
-# HP/UX-64bit: +forceload
-# AIX: -bnogc
-# SHAREDFLAGS would be:
-# GNU systems: -shared -Wl,-soname=lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR}
-# Tru64 Unix: -shared \
-# -set_version "${SHLIB_VERSION_HISTORY}${SHLIB_VERSION_NUMBER}"
-# Solaris: -G -h lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR}
-# Irix: -shared -Wl,-soname,lib$$i.so.${SHLIB_MAJOR}.${SHLIB_MINOR}
-# HP/UX-32bit: +vnocompatwarnings -b -z +s \
-# +h lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR}
-# HP/UX-64bit: -b -z +h lib$$i.sl.${SHLIB_MAJOR}.${SHLIB_MINOR}
-# AIX: -G -bE:lib$$i.exp -bM:SRE
-# SHAREDCMD would be:
-# GNU systems: $(CC)
-# Tru64 Unix: $(CC)
-# Solaris: $(CC)
-# Irix: $(CC)
-# HP/UX-32bit: /usr/ccs/bin/ld
-# HP/UX-64bit: /usr/ccs/bin/ld
-# AIX: $(CC)
-ALLSYMSFLAG=-bnogc
-SHAREDFLAGS=-G -bE:lib$$i.exp -bM:SRE
-SHAREDCMD=$(CC)
-do_aix-shared:
- libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
- ( set -x; \
- ld -r -o $$i.o $(ALLSYMSFLAG) lib$$i.a && \
- ( nm -Pg lib$$i.o | grep ' [BD] ' | cut -f1 -d' ' > lib$$i.exp; \
- $(SHAREDCMD) $(SHAREDFLAG) -o lib$$i.so lib$$i.o \
- $$libs ${EX_LIBS} ) ) \
- || exit 1; \
- libs="$$libs -l$$i"; \
+do_$(SHLIB_TARGET):
+ @ set -e; libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
+ if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+ libs="$(LIBKRB5) $$libs"; \
+ fi; \
+ $(MAKE) -f Makefile.shared $(BUILDENV) \
+ LIBNAME=$$i LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \
+ LIBCOMPATVERSIONS=";${SHLIB_VERSION_HISTORY}" \
+ LIBDEPS="$$libs $(EX_LIBS)" \
+ link_a.$(SHLIB_TARGET); \
+ libs="-l$$i $$libs"; \
done
-Makefile.ssl: Makefile.org
- @echo "Makefile.ssl is older than Makefile.org."
+openssl.pc: Makefile
+ @ ( echo 'prefix=$(INSTALLTOP)'; \
+ echo 'exec_prefix=$${prefix}'; \
+ echo 'libdir=$${exec_prefix}/lib'; \
+ echo 'includedir=$${prefix}/include'; \
+ echo ''; \
+ echo 'Name: OpenSSL'; \
+ echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
+ echo 'Version: '$(VERSION); \
+ echo 'Requires: '; \
+ echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
+ echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > openssl.pc
+
+Makefile: Makefile.org Configure config
+ @echo "Makefile is older than Makefile.org, Configure or config."
@echo "Reconfigure the source tree (via './config' or 'perl Configure'), please."
@false
libclean:
- rm -f *.a */lib */*/lib
+ rm -f *.map *.so *.so.* *.dll engines/*.so engines/*.dll *.a engines/*.a */lib */*/lib
-clean:
- rm -f shlib/*.o *.o core a.out fluff *.map rehash.time testlog make.log cctest cctest.c
- @for i in $(DIRS) ;\
+clean: libclean
+ rm -f shlib/*.o *.o core a.out fluff rehash.time testlog make.log cctest cctest.c
+ @set -e; for i in $(DIRS) ;\
do \
if [ -d "$$i" ]; then \
(cd $$i && echo "making clean in $$i..." && \
rm -f $(LIBS); \
fi; \
done;
- rm -f *.a *.o speed.* *.map *.so .pure core
+ rm -f openssl.pc
+ rm -f speed.* .pure
rm -f $(TARFILE)
- @for i in $(ONEDIRS) ;\
+ @set -e; for i in $(ONEDIRS) ;\
do \
rm -fr $$i/*; \
done
sh util/do_ms.sh
files:
- $(PERL) $(TOP)/util/files.pl Makefile.ssl > $(TOP)/MINFO
- @for i in $(DIRS) ;\
+ $(PERL) $(TOP)/util/files.pl Makefile > $(TOP)/MINFO
+ @set -e; for i in $(DIRS) ;\
do \
if [ -d "$$i" ]; then \
(cd $$i && echo "making 'files' in $$i..." && \
done;
links:
- @$(TOP)/util/point.sh Makefile.ssl Makefile
@$(PERL) $(TOP)/util/mkdir-p.pl include/openssl
@$(PERL) $(TOP)/util/mklink.pl include/openssl $(EXHEADER)
- @for i in $(DIRS); do \
- if [ -d "$$i" ]; then \
- (cd $$i && echo "making links in $$i..." && \
- $(MAKE) CC='${CC}' PLATFORM='${PLATFORM}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PERL='${PERL}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' links ) || exit 1; \
- fi; \
- done;
+ @set -e; target=links; for dir in $(DIRS); do $(BUILD_CMD); done
+
+gentests:
+ @(cd test && echo "generating dummy tests (if needed)..." && \
+ $(MAKE) $(BUILDENV) TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on generate );
dclean:
rm -f *.bak
- @for i in $(DIRS) ;\
+ @set -e; for i in $(DIRS) ;\
do \
if [ -d "$$i" ]; then \
(cd $$i && echo "making dclean in $$i..." && \
rehash: rehash.time
rehash.time: certs
- @(OPENSSL="`pwd`/apps/openssl"; OPENSSL_DEBUG_MEMORY=on; export OPENSSL OPENSSL_DEBUG_MEMORY; $(PERL) tools/c_rehash certs)
+ @(OPENSSL="`pwd`/util/opensslwrap.sh"; \
+ OPENSSL_DEBUG_MEMORY=on; \
+ export OPENSSL OPENSSL_DEBUG_MEMORY; \
+ $(PERL) tools/c_rehash certs)
touch rehash.time
test: tests
tests: rehash
@(cd test && echo "testing..." && \
- $(MAKE) CC='${CC}' CFLAG='${CFLAG}' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SDIRS='${SDIRS}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' PERL='${PERL}' TESTS='${TESTS}' KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' EXE_EXT='${EXE_EXT}' OPENSSL_DEBUG_MEMORY=on tests );
- @apps/openssl version -a
+ $(MAKE) $(BUILDENV) TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on tests );
+ util/opensslwrap.sh version -a
report:
@$(PERL) util/selftest.pl
depend:
- @for i in $(DIRS) ;\
+ @set -e; for i in $(DIRS) ;\
do \
if [ -d "$$i" ]; then \
(cd $$i && echo "making dependencies $$i..." && \
- $(MAKE) SDIRS='${SDIRS}' DEPFLAG='${DEPFLAG}' MAKEDEPPROG='${MAKEDEPPROG}' KRB5_INCLUDES='${KRB5_INCLUDES}' depend ) || exit 1; \
+ $(MAKE) $(BUILDENV) depend ) || exit 1; \
fi; \
done;
lint:
- @for i in $(DIRS) ;\
+ @set -e; for i in $(DIRS) ;\
do \
if [ -d "$$i" ]; then \
(cd $$i && echo "making lint $$i..." && \
done;
tags:
- @for i in $(DIRS) ;\
- do \
- if [ -d "$$i" ]; then \
- (cd $$i && echo "making tags $$i..." && \
- $(MAKE) SDIRS='${SDIRS}' tags ) || exit 1; \
- fi; \
- done;
+ rm -f TAGS
+ find . -name '[^.]*.[ch]' | xargs etags -a
errors:
$(PERL) util/mkerr.pl -recurse -write
+ (cd engines; $(MAKE) PERL=$(PERL) errors)
+ $(PERL) util/ck_errf.pl */*.c */*/*.c
stacks:
$(PERL) util/mkstack.pl -write
crypto/objects/obj_mac.h: crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num
$(PERL) crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num crypto/objects/obj_mac.h
+apps/openssl-vms.cnf: apps/openssl.cnf
+ $(PERL) VMS/VMSify-conf.pl < apps/openssl.cnf > apps/openssl-vms.cnf
+
TABLE: Configure
(echo 'Output of `Configure TABLE'"':"; \
$(PERL) Configure TABLE) > TABLE
-update: depend errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h TABLE
+update: depend errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h apps/openssl-vms.cnf TABLE
+# Build distribution tar-file. As the list of files returned by "find" is
+# pretty long, on several platforms a "too many arguments" error or similar
+# would occur. Therefore the list of files is temporarily stored into a file
+# and read directly, requiring GNU-Tar. Call "make TAR=gtar dist" if the normal
+# tar does not support the --files-from option.
tar:
- @$(TAR) $(TARFLAGS) -cvf - \
- `find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE | sort` |\
+ find . -type d -print | xargs chmod 755
+ find . -type f -print | xargs chmod a+r
+ find . -type f -perm -0100 -print | xargs chmod a+x
+ find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE | sort > ../$(TARFILE).list; \
+ $(TAR) $(TARFLAGS) --files-from ../$(TARFILE).list -cvf - | \
tardy --user_number=0 --user_name=openssl \
--group_number=0 --group_name=openssl \
--prefix=openssl-$(VERSION) - |\
gzip --best >../$(TARFILE).gz; \
+ rm -f ../$(TARFILE).list; \
ls -l ../$(TARFILE).gz
tar-snap:
@$(TAR) $(TARFLAGS) -cvf - \
- `find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE \! -name '*.o' \! -name '*.a' \! -name '*.so' \! -name '*.so.*' \! -name 'openssl' \! -name '*test' \! -name '.#*' | sort` |\
+ `find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE \! -name '*.o' \! -name '*.a' \! -name '*.so' \! -name '*.so.*' \! -name 'openssl' \! -name '*test' \! -name '.#*' \! -name '*~' | sort` |\
tardy --user_number=0 --user_name=openssl \
--group_number=0 --group_name=openssl \
--prefix=openssl-$(VERSION) - > ../$(TARFILE);\
$(PERL) Configure dist
@$(MAKE) dist_pem_h
@$(MAKE) SDIRS='${SDIRS}' clean
- @$(MAKE) tar
+ @$(MAKE) TAR='${TAR}' TARFLAGS='${TARFLAGS}' tar
dist_pem_h:
- (cd crypto/pem; $(MAKE) CC='${CC}' SDIRS='${SDIRS}' CFLAG='${CFLAG}' pem.h; $(MAKE) clean)
+ (cd crypto/pem; $(MAKE) $(BUILDENV) pem.h; $(MAKE) clean)
+
+install: all install_docs install_sw
-install: all install_docs
+install_sw:
@$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALL_PREFIX)$(INSTALLTOP)/bin \
$(INSTALL_PREFIX)$(INSTALLTOP)/lib \
+ $(INSTALL_PREFIX)$(INSTALLTOP)/lib/engines \
+ $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig \
$(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl \
$(INSTALL_PREFIX)$(OPENSSLDIR)/misc \
$(INSTALL_PREFIX)$(OPENSSLDIR)/certs \
- $(INSTALL_PREFIX)$(OPENSSLDIR)/private \
- $(INSTALL_PREFIX)$(OPENSSLDIR)/lib
- @for i in $(EXHEADER) ;\
+ $(INSTALL_PREFIX)$(OPENSSLDIR)/private
+ @set -e; headerlist="$(EXHEADER)"; for i in $$headerlist;\
do \
(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
done;
- @for i in $(DIRS) ;\
+ @set -e; for i in $(DIRS) ;\
do \
if [ -d "$$i" ]; then \
(cd $$i; echo "installing $$i..."; \
- $(MAKE) CC='${CC}' CFLAG='${CFLAG}' INSTALL_PREFIX='${INSTALL_PREFIX}' INSTALLTOP='${INSTALLTOP}' OPENSSLDIR='${OPENSSLDIR}' EX_LIBS='${EX_LIBS}' SDIRS='${SDIRS}' RANLIB='${RANLIB}' EXE_EXT='${EXE_EXT}' install ); \
+ $(MAKE) $(BUILDENV) install ); \
fi; \
done
- @for i in $(LIBS) ;\
+ @set -e; for i in $(LIBS) ;\
do \
if [ -f "$$i" ]; then \
( echo installing $$i; \
- cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
- $(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
- chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \
- fi \
- done
- @if [ -n "$(SHARED_LIBS)" ]; then \
+ cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+ $(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+ chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+ mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \
+ fi; \
+ done;
+ @set -e; if [ -n "$(SHARED_LIBS)" ]; then \
tmp="$(SHARED_LIBS)"; \
for i in $${tmp:-x}; \
do \
- if [ -f "$$i" ]; then \
+ if [ -f "$$i" -o -f "$$i.a" ]; then \
( echo installing $$i; \
- cp -f $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
- chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \
- fi \
+ if [ "$(PLATFORM)" != "Cygwin" ]; then \
+ cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+ chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+ mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
+ else \
+ c=`echo $$i | sed 's/^lib\(.*\)\.dll\.a/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
+ cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
+ chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
+ mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
+ cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+ chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+ mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
+ fi ); \
+ fi; \
done; \
( here="`pwd`"; \
cd $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
- make -f $$here/Makefile link-shared ); \
+ $(MAKE) -f $$here/Makefile HERE="$$here" link-shared ); \
+ if [ "$(INSTALLTOP)" != "/usr" ]; then \
+ echo 'OpenSSL shared libraries have been installed in:'; \
+ echo ' $(INSTALLTOP)'; \
+ echo ''; \
+ sed -e '1,/^$$/d' doc/openssl-shared.txt; \
+ fi; \
fi
+ cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig
+ chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig/openssl.pc
install_docs:
@$(PERL) $(TOP)/util/mkdir-p.pl \
$(INSTALL_PREFIX)$(MANDIR)/man3 \
$(INSTALL_PREFIX)$(MANDIR)/man5 \
$(INSTALL_PREFIX)$(MANDIR)/man7
- @for i in doc/apps/*.pod; do \
+ @pod2man="`cd util; ./pod2mantest $(PERL)`"; \
+ here="`pwd`"; \
+ filecase=; \
+ if [ "$(PLATFORM)" = "DJGPP" -o "$(PLATFORM)" = "Cygwin" -o "$(PLATFORM)" = "mingw" ]; then \
+ filecase=-i; \
+ fi; \
+ set -e; for i in doc/apps/*.pod; do \
fn=`basename $$i .pod`; \
- if [ "$$fn" = "config" ]; then sec=5; else sec=1; fi; \
- echo "installing man$$sec/`basename $$i .pod`.$$sec"; \
- (cd `dirname $$i`; \
- $(PERL) ../../util/pod2man.pl --section=$$sec --center=OpenSSL \
- --release=$(VERSION) `basename $$i`) \
- > $(INSTALL_PREFIX)$(MANDIR)/man$$sec/`basename $$i .pod`.$$sec; \
- done
- @for i in doc/crypto/*.pod doc/ssl/*.pod; do \
+ sec=`$(PERL) util/extract-section.pl 1 < $$i`; \
+ echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
+ (cd `$(PERL) util/dirname.pl $$i`; \
+ sh -c "$$pod2man \
+ --section=$$sec --center=OpenSSL \
+ --release=$(VERSION) `basename $$i`") \
+ > $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
+ $(PERL) util/extract-names.pl < $$i | \
+ grep -v $$filecase "^$$fn\$$" | \
+ grep -v "[ ]" | \
+ (cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
+ while read n; do \
+ $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
+ done); \
+ done; \
+ set -e; for i in doc/crypto/*.pod doc/ssl/*.pod; do \
fn=`basename $$i .pod`; \
- if [ "$$fn" = "des_modes" ]; then sec=7; else sec=3; fi; \
- echo "installing man$$sec/`basename $$i .pod`.$$sec"; \
- (cd `dirname $$i`; \
- $(PERL) ../../util/pod2man.pl --section=$$sec --center=OpenSSL \
- --release=$(VERSION) `basename $$i`) \
- > $(INSTALL_PREFIX)$(MANDIR)/man$$sec/`basename $$i .pod`.$$sec; \
+ sec=`$(PERL) util/extract-section.pl 3 < $$i`; \
+ echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
+ (cd `$(PERL) util/dirname.pl $$i`; \
+ sh -c "$$pod2man \
+ --section=$$sec --center=OpenSSL \
+ --release=$(VERSION) `basename $$i`") \
+ > $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
+ $(PERL) util/extract-names.pl < $$i | \
+ grep -v $$filecase "^$$fn\$$" | \
+ grep -v "[ ]" | \
+ (cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
+ while read n; do \
+ $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
+ done); \
done
# DO NOT DELETE THIS LINE -- make depend depends on it.