# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
# gcc, then the driver will automatically translate it to -xarch=v8plus
# and pass it down to assembler.
-AS=$(CC) -c
+#AS=$(CC) -c
ASFLAG=$(CFLAG)
# For x86 assembler: Set PROCESSOR to 386 if you want to support
RMD160_ASM_OBJ=
WP_ASM_OBJ=
CMLL_ENC=
+MODES_ASM_OBJ=
PERLASM_SCHEME=
# KRB5 stuff
ZLIB_INCLUDE=
LIBZLIB=
-DIRS= crypto ssl engines apps test tools
+# This is the location of fipscanister.o and friends.
+# The FIPS module build will place it $(INSTALLTOP)/lib
+# but since $(INSTALLTOP) can only take the default value
+# when the module is built it will be in /usr/local/ssl/lib
+# $(INSTALLTOP) for this build may be different so hard
+# code the path.
+
+FIPSLIBDIR=/usr/local/ssl/$(LIBDIR)/
+
+# This is set to "y" if fipscanister.o is compiled internally as
+# opposed to coming from an external validated location.
+
+FIPSCANISTERINTERNAL=n
+
+# The location of the library which contains fipscanister.o
+# normally it will be libcrypto unless fipsdso is set in which
+# case it will be libfips. If not compiling in FIPS mode at all
+# this is empty making it a useful test for a FIPS compile.
+
+FIPSCANLIB=
+
+# Shared library base address. Currently only used on Windows.
+#
+
+BASEADDR=
+
+DIRS= crypto fips ssl engines apps test tools
ENGDIRS= ccgost
SHLIBDIRS= crypto ssl
bn ec rsa dsa ecdsa dh ecdh dso engine \
buffer bio stack lhash rand err \
evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \
- cms pqueue ts jpake store cmac
+ cms pqueue ts jpake srp store cmac
# keep in mind that the above list is adjusted by ./Configure
# according to no-xxx arguments...
BUILDENV= PLATFORM='$(PLATFORM)' PROCESSOR='$(PROCESSOR)' \
CC='$(CC)' CFLAG='$(CFLAG)' \
- AS='$(CC)' ASFLAG='$(CFLAG) -c' \
+ ASFLAG='$(CFLAG) -c' \
AR='$(AR)' NM='$(NM)' RANLIB='$(RANLIB)' \
CROSS_COMPILE='$(CROSS_COMPILE)' \
PERL='$(PERL)' ENGDIRS='$(ENGDIRS)' \
MD5_ASM_OBJ='$(MD5_ASM_OBJ)' \
RMD160_ASM_OBJ='$(RMD160_ASM_OBJ)' \
WP_ASM_OBJ='$(WP_ASM_OBJ)' \
+ MODES_ASM_OBJ='$(MODES_ASM_OBJ)' \
PERLASM_SCHEME='$(PERLASM_SCHEME)' \
+ FIPSLIBDIR='${FIPSLIBDIR}' \
+ FIPSCANLIB="$${FIPSCANLIB:-$(FIPSCANLIB)}" \
+ FIPSCANISTERINTERNAL='${FIPSCANISTERINTERNAL}' \
+ FIPS_EX_OBJ='${FIPS_EX_OBJ}' \
THIS=$${THIS:-$@} MAKEFILE=Makefile MAKEOVERRIDES=
# MAKEOVERRIDES= effectively "equalizes" GNU-ish and SysV-ish make flavors,
# which in turn eliminates ambiguities in variable treatment with -e.
reflect:
@[ -n "$(THIS)" ] && $(CLEARENV) && $(MAKE) $(THIS) -e $(BUILDENV)
+FIPS_EX_OBJ= ../crypto/aes/aes_cfb.o \
+ ../crypto/aes/aes_ecb.o \
+ ../crypto/aes/aes_ofb.o \
+ ../crypto/bn/bn_add.o \
+ ../crypto/bn/bn_blind.o \
+ ../crypto/bn/bn_ctx.o \
+ ../crypto/bn/bn_div.o \
+ ../crypto/bn/bn_exp2.o \
+ ../crypto/bn/bn_exp.o \
+ ../crypto/bn/bn_gcd.o \
+ ../crypto/bn/bn_gf2m.o \
+ ../crypto/bn/bn_lib.o \
+ ../crypto/bn/bn_mod.o \
+ ../crypto/bn/bn_mont.o \
+ ../crypto/bn/bn_mul.o \
+ ../crypto/bn/bn_nist.o \
+ ../crypto/bn/bn_prime.o \
+ ../crypto/bn/bn_rand.o \
+ ../crypto/bn/bn_recp.o \
+ ../crypto/bn/bn_shift.o \
+ ../crypto/bn/bn_sqr.o \
+ ../crypto/bn/bn_word.o \
+ ../crypto/bn/bn_x931p.o \
+ ../crypto/buffer/buf_str.o \
+ ../crypto/cmac/cmac.o \
+ ../crypto/cryptlib.o \
+ ../crypto/des/cfb64ede.o \
+ ../crypto/des/cfb64enc.o \
+ ../crypto/des/cfb_enc.o \
+ ../crypto/des/ecb3_enc.o \
+ ../crypto/des/ofb64ede.o \
+ ../crypto/des/fcrypt.o \
+ ../crypto/des/set_key.o \
+ ../crypto/dh/dh_check.o \
+ ../crypto/dh/dh_gen.o \
+ ../crypto/dh/dh_key.o \
+ ../crypto/dsa/dsa_gen.o \
+ ../crypto/dsa/dsa_key.o \
+ ../crypto/dsa/dsa_ossl.o \
+ ../crypto/ec/ec_curve.o \
+ ../crypto/ec/ec_cvt.o \
+ ../crypto/ec/ec_key.o \
+ ../crypto/ec/ec_lib.o \
+ ../crypto/ec/ecp_mont.o \
+ ../crypto/ec/ec_mult.o \
+ ../crypto/ec/ecp_nist.o \
+ ../crypto/ec/ecp_smpl.o \
+ ../crypto/ec/ec2_mult.o \
+ ../crypto/ec/ec2_smpl.o \
+ ../crypto/ecdh/ech_key.o \
+ ../crypto/ecdh/ech_ossl.o \
+ ../crypto/ecdsa/ecs_ossl.o \
+ ../crypto/evp/e_aes.o \
+ ../crypto/evp/e_des3.o \
+ ../crypto/evp/m_sha1.o \
+ ../crypto/hmac/hmac.o \
+ ../crypto/modes/cbc128.o \
+ ../crypto/modes/ccm128.o \
+ ../crypto/modes/cfb128.o \
+ ../crypto/modes/ctr128.o \
+ ../crypto/modes/gcm128.o \
+ ../crypto/modes/ofb128.o \
+ ../crypto/modes/xts128.o \
+ ../crypto/rsa/rsa_eay.o \
+ ../crypto/rsa/rsa_gen.o \
+ ../crypto/rsa/rsa_crpt.o \
+ ../crypto/rsa/rsa_none.o \
+ ../crypto/rsa/rsa_oaep.o \
+ ../crypto/rsa/rsa_pk1.o \
+ ../crypto/rsa/rsa_pss.o \
+ ../crypto/rsa/rsa_ssl.o \
+ ../crypto/rsa/rsa_x931.o \
+ ../crypto/rsa/rsa_x931g.o \
+ ../crypto/sha/sha1dgst.o \
+ ../crypto/sha/sha256.o \
+ ../crypto/sha/sha512.o \
+ ../crypto/thr_id.o \
+ ../crypto/uid.o
+
sub_all: build_all
build_all: build_libs build_apps build_tests build_tools
-build_libs: build_crypto build_ssl build_engines
+build_libs: build_crypto build_fips build_ssl build_engines
+
+build_fips:
+ @dir=fips; target=all; [ -z "$(FIPSCANLIB)" ] || $(BUILD_ONE_CMD)
build_crypto:
- @dir=crypto; target=all; $(BUILD_ONE_CMD)
+ if [ -n "$(FIPSCANLIB)" ]; then \
+ EXCL_OBJ='$(AES_ENC) $(BN_ASM) $(DES_ENC) $(CPUID_OBJ) $(SHA1_ASM_OBJ) $(MODES_ASM_OBJ) $(FIPS_EX_OBJ)' ; export EXCL_OBJ ; \
+ ARX='$(PERL) $${TOP}/util/arx.pl $(AR)' ; \
+ else \
+ ARX='${AR}' ; \
+ fi ; export ARX ; \
+ if [ $(FIPSCANISTERINTERNAL) = "y" ]; then \
+ AS='$(PERL) $${TOP}/util/fipsas.pl $${TOP} $${<} $(CC) -c' ; \
+ else \
+ AS='$(CC) -c' ; \
+ fi ; export AS ; \
+ dir=crypto; target=all; $(BUILD_ONE_CMD)
build_ssl:
@dir=ssl; target=all; $(BUILD_ONE_CMD)
build_engines:
build_testapps:
@dir=crypto; target=testapps; $(BUILD_ONE_CMD)
-libcrypto$(SHLIB_EXT): libcrypto.a
+libcrypto$(SHLIB_EXT): libcrypto.a build_fips
@if [ "$(SHLIB_TARGET)" != "" ]; then \
- $(MAKE) SHLIBDIRS=crypto build-shared; \
+ if [ "$(FIPSCANLIB)" = "libcrypto" ]; then \
+ FIPSLD_CC="$(CC)"; CC=fips/fipsld; \
+ export CC FIPSLD_CC; \
+ fi; \
+ $(MAKE) -e SHLIBDIRS=crypto build-shared; \
else \
echo "There's no support for shared libraries on this platform" >&2; \
exit 1; \
@$(PERL) $(TOP)/util/mkdir-p.pl include/openssl
@$(PERL) $(TOP)/util/mklink.pl include/openssl $(EXHEADER)
@set -e; target=links; $(RECURSIVE_BUILD_CMD)
+ @if [ -z "$(FIPSCANLIB)" ]; then \
+ set -e; target=links; dir=fips ; $(BUILD_CMD) ; \
+ fi
gentests:
@(cd test && echo "generating dummy tests (if needed)..." && \