# equal 4.
# PKCS1_CHECK - pkcs1 tests.
-CC= gcc
-#CFLAG= -DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall -Wuninitialized -DSHA1_ASM -DMD5_ASM -DRMD160_ASM
-CFLAG= -DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall -DSHA1_ASM -DMD5_ASM -DRMD160_ASM
+CC= cc
+CFLAG= -O
DEPFLAG=
PEX_LIBS=
EX_LIBS=
ARFLAGS=
AR=ar $(ARFLAGS) r
RANLIB= ranlib
+NM= nm
PERL= perl
TAR= tar
TARFLAGS= --no-recursion
# CPUID module collects small commonly used assembler snippets
CPUID_OBJ=
-
-# Set BN_ASM to bn_asm.o if you want to use the C version
BN_ASM= bn_asm.o
-#BN_ASM= bn_asm.o
-#BN_ASM= asm/bn86-elf.o # elf, linux-elf
-#BN_ASM= asm/bn86-sol.o # solaris
-#BN_ASM= asm/bn86-out.o # a.out, FreeBSD
-#BN_ASM= asm/bn86bsdi.o # bsdi
-#BN_ASM= asm/alpha.o # DEC Alpha
-#BN_ASM= asm/pa-risc2.o # HP-UX PA-RISC
-#BN_ASM= asm/r3000.o # SGI MIPS cpu
-#BN_ASM= asm/sparc.o # Sun solaris/SunOS
-#BN_ASM= asm/bn-win32.o # Windows 95/NT
-#BN_ASM= asm/x86w16.o # 16 bit code for Windows 3.1/DOS
-#BN_ASM= asm/x86w32.o # 32 bit code for Windows 3.1
-
-# Set DES_ENC to des_enc.o if you want to use the C version
-#There are 4 x86 assember options.
-DES_ENC= asm/dx86-out.o asm/yx86-out.o
-#DES_ENC= des_enc.o fcrypt_b.o # C
-#DES_ENC= asm/dx86-elf.o asm/yx86-elf.o # elf
-#DES_ENC= asm/dx86-sol.o asm/yx86-sol.o # solaris
-#DES_ENC= asm/dx86-out.o asm/yx86-out.o # a.out, FreeBSD
-#DES_ENC= asm/dx86bsdi.o asm/yx86bsdi.o # bsdi
-
-AES_ASM_OBJ=aes_core.o aes_cbc.o
-
-# Set BF_ENC to bf_enc.o if you want to use the C version
-#There are 4 x86 assember options.
-BF_ENC= asm/bx86-out.o
-#BF_ENC= bf_enc.o
-#BF_ENC= asm/bx86-elf.o # elf
-#BF_ENC= asm/bx86-sol.o # solaris
-#BF_ENC= asm/bx86-out.o # a.out, FreeBSD
-#BF_ENC= asm/bx86bsdi.o # bsdi
-
-# Set CAST_ENC to c_enc.o if you want to use the C version
-#There are 4 x86 assember options.
-CAST_ENC= asm/cx86-out.o
-#CAST_ENC= c_enc.o
-#CAST_ENC= asm/cx86-elf.o # elf
-#CAST_ENC= asm/cx86-sol.o # solaris
-#CAST_ENC= asm/cx86-out.o # a.out, FreeBSD
-#CAST_ENC= asm/cx86bsdi.o # bsdi
-
-# Set RC4_ENC to rc4_enc.o if you want to use the C version
-#There are 4 x86 assember options.
-RC4_ENC= asm/rx86-out.o
-#RC4_ENC= rc4_enc.o
-#RC4_ENC= asm/rx86-elf.o # elf
-#RC4_ENC= asm/rx86-sol.o # solaris
-#RC4_ENC= asm/rx86-out.o # a.out, FreeBSD
-#RC4_ENC= asm/rx86bsdi.o # bsdi
-
-# Set RC5_ENC to rc5_enc.o if you want to use the C version
-#There are 4 x86 assember options.
-RC5_ENC= asm/r586-out.o
-#RC5_ENC= rc5_enc.o
-#RC5_ENC= asm/r586-elf.o # elf
-#RC5_ENC= asm/r586-sol.o # solaris
-#RC5_ENC= asm/r586-out.o # a.out, FreeBSD
-#RC5_ENC= asm/r586bsdi.o # bsdi
-
-# Also need MD5_ASM defined
-MD5_ASM_OBJ= asm/mx86-out.o
-#MD5_ASM_OBJ= asm/mx86-elf.o # elf
-#MD5_ASM_OBJ= asm/mx86-sol.o # solaris
-#MD5_ASM_OBJ= asm/mx86-out.o # a.out, FreeBSD
-#MD5_ASM_OBJ= asm/mx86bsdi.o # bsdi
-
-# Also need SHA1_ASM defined
-SHA1_ASM_OBJ= asm/sx86-out.o
-#SHA1_ASM_OBJ= asm/sx86-elf.o # elf
-#SHA1_ASM_OBJ= asm/sx86-sol.o # solaris
-#SHA1_ASM_OBJ= asm/sx86-out.o # a.out, FreeBSD
-#SHA1_ASM_OBJ= asm/sx86bsdi.o # bsdi
-
-# Also need RMD160_ASM defined
-RMD160_ASM_OBJ= asm/rm86-out.o
-#RMD160_ASM_OBJ= asm/rm86-elf.o # elf
-#RMD160_ASM_OBJ= asm/rm86-sol.o # solaris
-#RMD160_ASM_OBJ= asm/rm86-out.o # a.out, FreeBSD
-#RMD160_ASM_OBJ= asm/rm86bsdi.o # bsdi
+DES_ENC= des_enc.o fcrypt_b.o
+AES_ENC= aes_core.o aes_cbc.o
+BF_ENC= bf_enc.o
+CAST_ENC= c_enc.o
+RC4_ENC= rc4_enc.o
+RC5_ENC= rc5_enc.o
+MD5_ASM_OBJ=
+SHA1_ASM_OBJ=
+RMD160_ASM_OBJ=
+WP_ASM_OBJ=
+CMLL_ENC=
+PERLASM_SCHEME=
# KRB5 stuff
KRB5_INCLUDES=
LIBKRB5=
+# Zlib stuff
+ZLIB_INCLUDE=
+LIBZLIB=
+
DIRS= crypto ssl engines apps test tools
SHLIBDIRS= crypto ssl
# dirs in crypto to build
SDIRS= \
objects \
- md2 md4 md5 sha mdc2 hmac ripemd \
- des rc2 rc4 rc5 idea bf cast \
- bn ec rsa dsa ecdsa dh ecdh dso engine aes \
+ md2 md4 md5 sha mdc2 hmac ripemd whrlpool \
+ des aes rc2 rc4 rc5 idea bf cast camellia seed modes \
+ bn ec rsa dsa ecdsa dh ecdh dso engine \
buffer bio stack lhash rand err \
evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \
- store
+ cms pqueue ts jpake
+# keep in mind that the above list is adjusted by ./Configure
+# according to no-xxx arguments...
# tests to perform. "alltests" is a special word indicating that all tests
# should be performed.
TESTS = alltests
-MAKEFILE= Makefile.ssl
-NEWMAKE= make
-MAKE= $(NEWMAKE) -f Makefile.ssl
+MAKEFILE= Makefile
MANDIR=$(OPENSSLDIR)/man
MAN1=1
MAN3=3
MANSUFFIX=
+HTMLSUFFIX=html
+HTMLDIR=$(OPENSSLDIR)/html
SHELL=/bin/sh
TOP= .
EXHEADER= e_os2.h
HEADER= e_os.h
-all: Makefile.ssl build_all openssl.pc
-
-BUILDENV= PLATFORM='${PLATFORM}' PROCESSOR='${PROCESSOR}' \
- SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' \
- CC='${CC}' CFLAG='${CFLAG}' \
- AS='${CC}' ASFLAG='${CFLAG} -c' \
- AR='${AR}' PERL='${PERL}' RANLIB='${RANLIB}' \
- LDFLAGS="$(LDFLAGS)" SHARED_LDFLAGS="$(SHARED_LDFLAGS)" \
- KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' \
- EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' \
- SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' \
- PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' \
- CPUID_OBJ='${CPUID_OBJ}' \
- BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' \
- AES_ASM_OBJ='${AES_ASM_OBJ}' \
- BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' \
- RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' \
- SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' \
- MD5_ASM_OBJ='${MD5_ASM_OBJ}' \
- RMD160_ASM_OBJ='${RMD160_ASM_OBJ}'
-
-BUILD_CMD=if echo " $(DIRS) " | grep " $$dir " >/dev/null 2>/dev/null; then \
- if [ -d "$$dir" ]; then \
- (cd $$dir && echo "making $$target in $$dir..." && \
- $(MAKE) -e $(BUILDENV) $$target ) || exit 1; \
- else \
- $(MAKE) $$dir; \
- fi; fi
+all: Makefile build_all openssl.pc libssl.pc libcrypto.pc
+
+# as we stick to -e, CLEARENV ensures that local variables in lower
+# Makefiles remain local and variable. $${VAR+VAR} is tribute to Korn
+# shell, which [annoyingly enough] terminates unset with error if VAR
+# is not present:-( TOP= && unset TOP is tribute to HP-UX /bin/sh,
+# which terminates unset with error if no variable was present:-(
+CLEARENV= TOP= && unset TOP $${LIB+LIB} $${LIBS+LIBS} \
+ $${INCLUDE+INCLUDE} $${INCLUDES+INCLUDES} \
+ $${DIR+DIR} $${DIRS+DIRS} $${SRC+SRC} \
+ $${LIBSRC+LIBSRC} $${LIBOBJ+LIBOBJ} $${ALL+ALL} \
+ $${EXHEADER+EXHEADER} $${HEADER+HEADER} \
+ $${GENERAL+GENERAL} $${CFLAGS+CFLAGS} \
+ $${ASFLAGS+ASFLAGS} $${AFLAGS+AFLAGS} \
+ $${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS} \
+ $${SHAREDCMD+SHAREDCMD} $${SHAREDFLAGS+SHAREDFLAGS} \
+ $${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS}
+
+BUILDENV= PLATFORM='$(PLATFORM)' PROCESSOR='$(PROCESSOR)' \
+ CC='$(CC)' CFLAG='$(CFLAG)' \
+ AS='$(CC)' ASFLAG='$(CFLAG) -c' \
+ AR='$(AR)' NM='$(NM)' RANLIB='$(RANLIB)' \
+ CROSS_COMPILE_PREFIX='$(CROSS_COMPILE_PREFIX)' \
+ PERL='$(PERL)' \
+ SDIRS='$(SDIRS)' LIBRPATH='$(INSTALLTOP)/lib' \
+ INSTALL_PREFIX='$(INSTALL_PREFIX)' \
+ INSTALLTOP='$(INSTALLTOP)' OPENSSLDIR='$(OPENSSLDIR)' \
+ MAKEDEPEND='$$$${TOP}/util/domd $$$${TOP} -MD $(MAKEDEPPROG)' \
+ DEPFLAG='-DOPENSSL_NO_DEPRECATED $(DEPFLAG)' \
+ MAKEDEPPROG='$(MAKEDEPPROG)' \
+ SHARED_LDFLAGS='$(SHARED_LDFLAGS)' \
+ KRB5_INCLUDES='$(KRB5_INCLUDES)' LIBKRB5='$(LIBKRB5)' \
+ EXE_EXT='$(EXE_EXT)' SHARED_LIBS='$(SHARED_LIBS)' \
+ SHLIB_EXT='$(SHLIB_EXT)' SHLIB_TARGET='$(SHLIB_TARGET)' \
+ PEX_LIBS='$(PEX_LIBS)' EX_LIBS='$(EX_LIBS)' \
+ CPUID_OBJ='$(CPUID_OBJ)' \
+ BN_ASM='$(BN_ASM)' DES_ENC='$(DES_ENC)' \
+ AES_ENC='$(AES_ENC)' CMLL_ENC='$(CMLL_ENC)' \
+ BF_ENC='$(BF_ENC)' CAST_ENC='$(CAST_ENC)' \
+ RC4_ENC='$(RC4_ENC)' RC5_ENC='$(RC5_ENC)' \
+ SHA1_ASM_OBJ='$(SHA1_ASM_OBJ)' \
+ MD5_ASM_OBJ='$(MD5_ASM_OBJ)' \
+ RMD160_ASM_OBJ='$(RMD160_ASM_OBJ)' \
+ WP_ASM_OBJ='$(WP_ASM_OBJ)' \
+ PERLASM_SCHEME='$(PERLASM_SCHEME)' \
+ THIS=$${THIS:-$@} MAKEFILE=Makefile MAKEOVERRIDES=
+# MAKEOVERRIDES= effectively "equalizes" GNU-ish and SysV-ish make flavors,
+# which in turn eliminates ambiguities in variable treatment with -e.
+
+# BUILD_CMD is a generic macro to build a given target in a given
+# subdirectory. The target must be given through the shell variable
+# `target' and the subdirectory to build in must be given through `dir'.
+# This macro shouldn't be used directly, use RECURSIVE_BUILD_CMD or
+# BUILD_ONE_CMD instead.
+#
+# BUILD_ONE_CMD is a macro to build a given target in a given
+# subdirectory if that subdirectory is part of $(DIRS). It requires
+# exactly the same shell variables as BUILD_CMD.
+#
+# RECURSIVE_BUILD_CMD is a macro to build a given target in all
+# subdirectories defined in $(DIRS). It requires that the target
+# is given through the shell variable `target'.
+BUILD_CMD= if [ -d "$$dir" ]; then \
+ ( cd $$dir && echo "making $$target in $$dir..." && \
+ $(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. DIR=$$dir $$target \
+ ) || exit 1; \
+ fi
+RECURSIVE_BUILD_CMD=for dir in $(DIRS); do $(BUILD_CMD); done
+BUILD_ONE_CMD=\
+ if expr " $(DIRS) " : ".* $$dir " >/dev/null 2>&1; then \
+ $(BUILD_CMD); \
+ fi
+
+reflect:
+ @[ -n "$(THIS)" ] && $(CLEARENV) && $(MAKE) $(THIS) -e $(BUILDENV)
sub_all: build_all
build_all: build_libs build_apps build_tests build_tools
build_libs: build_crypto build_ssl build_engines
build_crypto:
- @dir=crypto; target=all; $(BUILD_CMD)
+ @dir=crypto; target=all; $(BUILD_ONE_CMD)
build_ssl:
- @dir=ssl; target=all; $(BUILD_CMD)
+ @dir=ssl; target=all; $(BUILD_ONE_CMD)
build_engines:
- @dir=engines; target=all; $(BUILD_CMD)
+ @dir=engines; target=all; $(BUILD_ONE_CMD)
build_apps:
- @dir=apps; target=all; $(BUILD_CMD)
+ @dir=apps; target=all; $(BUILD_ONE_CMD)
build_tests:
- @dir=test; target=all; $(BUILD_CMD)
+ @dir=test; target=all; $(BUILD_ONE_CMD)
build_tools:
- @dir=tools; target=all; $(BUILD_CMD)
+ @dir=tools; target=all; $(BUILD_ONE_CMD)
all_testapps: build_libs build_testapps
build_testapps:
- @dir=crypto; target=testapps; $(BUILD_CMD)
+ @dir=crypto; target=testapps; $(BUILD_ONE_CMD)
libcrypto$(SHLIB_EXT): libcrypto.a
@if [ "$(SHLIB_TARGET)" != "" ]; then \
done
link-shared:
- @ set -e; for i in ${SHLIBDIRS}; do \
- $(NEWMAKE) -f $(HERE)/Makefile.shared \
- LIBNAME=$$i LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \
- LIBCOMPATVERSIONS=";${SHLIB_VERSION_HISTORY}" \
+ @ set -e; for i in $(SHLIBDIRS); do \
+ $(MAKE) -f $(HERE)/Makefile.shared -e $(BUILDENV) \
+ LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
+ LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
symlink.$(SHLIB_TARGET); \
libs="$$libs -l$$i"; \
done
build-shared: do_$(SHLIB_TARGET) link-shared
do_$(SHLIB_TARGET):
- @ set -e; libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
- if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+ @ set -e; libs='-L. $(SHLIBDEPS)'; for i in $(SHLIBDIRS); do \
+ if [ "$(SHLIBDIRS)" = "ssl" -a -n "$(LIBKRB5)" ]; then \
libs="$(LIBKRB5) $$libs"; \
fi; \
- $(NEWMAKE) -f Makefile.shared \
- $(BUILDENV) \
- LIBNAME=$$i LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \
- LIBCOMPATVERSIONS=";${SHLIB_VERSION_HISTORY}" \
+ $(CLEARENV) && $(MAKE) -f Makefile.shared -e $(BUILDENV) \
+ LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
+ LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
LIBDEPS="$$libs $(EX_LIBS)" \
- LIBRPATH="$(INSTALLTOP)/lib" \
link_a.$(SHLIB_TARGET); \
libs="-l$$i $$libs"; \
done
-openssl.pc: Makefile.ssl
+libcrypto.pc: Makefile
+ @ ( echo 'prefix=$(INSTALLTOP)'; \
+ echo 'exec_prefix=$${prefix}'; \
+ echo 'libdir=$${exec_prefix}/lib'; \
+ echo 'includedir=$${prefix}/include'; \
+ echo ''; \
+ echo 'Name: OpenSSL-libcrypto'; \
+ echo 'Description: OpenSSL cryptography library'; \
+ echo 'Version: '$(VERSION); \
+ echo 'Requires: '; \
+ echo 'Libs: -L$${libdir} -lcrypto $(EX_LIBS)'; \
+ echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libcrypto.pc
+
+libssl.pc: Makefile
+ @ ( echo 'prefix=$(INSTALLTOP)'; \
+ echo 'exec_prefix=$${prefix}'; \
+ echo 'libdir=$${exec_prefix}/lib'; \
+ echo 'includedir=$${prefix}/include'; \
+ echo ''; \
+ echo 'Name: OpenSSL'; \
+ echo 'Description: Secure Sockets Layer and cryptography libraries'; \
+ echo 'Version: '$(VERSION); \
+ echo 'Requires: '; \
+ echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
+ echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libssl.pc
+
+openssl.pc: Makefile
@ ( echo 'prefix=$(INSTALLTOP)'; \
echo 'exec_prefix=$${prefix}'; \
echo 'libdir=$${exec_prefix}/lib'; \
echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > openssl.pc
-Makefile.ssl: Makefile.org
- @echo "Makefile.ssl is older than Makefile.org."
+Makefile: Makefile.org Configure config
+ @echo "Makefile is older than Makefile.org, Configure or config."
@echo "Reconfigure the source tree (via './config' or 'perl Configure'), please."
@false
libclean:
- rm -f *.map *.so *.so.* engines/*.so *.a */lib */*/lib
+ rm -f *.map *.so *.so.* *.dll engines/*.so engines/*.dll *.a engines/*.a */lib */*/lib
clean: libclean
rm -f shlib/*.o *.o core a.out fluff rehash.time testlog make.log cctest cctest.c
- @set -e; for i in $(DIRS) ;\
- do \
- if [ -d "$$i" ]; then \
- (cd $$i && echo "making clean in $$i..." && \
- $(MAKE) SDIRS='${SDIRS}' clean ) || exit 1; \
- rm -f $(LIBS); \
- fi; \
- done;
- rm -f openssl.pc
+ @set -e; target=clean; $(RECURSIVE_BUILD_CMD)
+ rm -f $(LIBS)
+ rm -f openssl.pc libssl.pc libcrypto.pc
rm -f speed.* .pure
rm -f $(TARFILE)
@set -e; for i in $(ONEDIRS) ;\
sh util/do_ms.sh
files:
- $(PERL) $(TOP)/util/files.pl Makefile.ssl > $(TOP)/MINFO
- @set -e; for i in $(DIRS) ;\
- do \
- if [ -d "$$i" ]; then \
- (cd $$i && echo "making 'files' in $$i..." && \
- $(MAKE) SDIRS='${SDIRS}' PERL='${PERL}' files ) || exit 1; \
- fi; \
- done;
+ $(PERL) $(TOP)/util/files.pl Makefile > $(TOP)/MINFO
+ @set -e; target=files; $(RECURSIVE_BUILD_CMD)
links:
- @$(TOP)/util/point.sh Makefile.ssl Makefile
@$(PERL) $(TOP)/util/mkdir-p.pl include/openssl
@$(PERL) $(TOP)/util/mklink.pl include/openssl $(EXHEADER)
- @set -e; target=links; for dir in $(DIRS); do $(BUILD_CMD); done
+ @set -e; target=links; $(RECURSIVE_BUILD_CMD)
gentests:
@(cd test && echo "generating dummy tests (if needed)..." && \
- $(MAKE) $(BUILDENV) TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on generate );
+ $(CLEARENV) && $(MAKE) -e $(BUILDENV) TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on generate );
dclean:
- rm -f *.bak
- @set -e; for i in $(DIRS) ;\
- do \
- if [ -d "$$i" ]; then \
- (cd $$i && echo "making dclean in $$i..." && \
- $(MAKE) SDIRS='${SDIRS}' PERL='${PERL}' dclean ) || exit 1; \
- fi; \
- done;
+ rm -rf *.bak include/openssl certs/.0
+ @set -e; target=dclean; $(RECURSIVE_BUILD_CMD)
rehash: rehash.time
-rehash.time: certs
- @(OPENSSL="`pwd`/apps/openssl$(EXE_EXT)"; OPENSSL_DEBUG_MEMORY=on; \
- export OPENSSL OPENSSL_DEBUG_MEMORY; \
- if [ -n "$(SHARED_LIBS)" ]; then \
- LD_LIBRARY_PATH="`pwd`:$$LD_LIBRARY_PATH"; \
- DYLD_LIBRARY_PATH="`pwd`:$$DYLD_LIBRARY_PATH"; \
- SHLIB_PATH="`pwd`:$$SHLIB_PATH"; \
- LIBPATH="`pwd`:$$LIBPATH"; \
- if [ "$(PLATFORM)" = "Cygwin" ]; then \
- PATH="`pwd`:$$PATH"; \
- fi; \
- LD_PRELOAD="`pwd`/libssl.so `pwd`/libcrypto.so"; \
- export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; \
- export LD_PRELOAD; \
- fi; \
- $(PERL) tools/c_rehash certs)
- touch rehash.time
+rehash.time: certs apps
+ @if [ -z "$(CROSS_COMPILE_PREFIX)" ]; then \
+ (OPENSSL="`pwd`/util/opensslwrap.sh"; \
+ [ -x "apps/openssl.exe" ] && OPENSSL="apps/openssl.exe" || :; \
+ OPENSSL_DEBUG_MEMORY=on; \
+ export OPENSSL OPENSSL_DEBUG_MEMORY; \
+ $(PERL) tools/c_rehash certs) && \
+ touch rehash.time; \
+ else :; fi
test: tests
tests: rehash
@(cd test && echo "testing..." && \
- $(MAKE) $(BUILDENV) TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on tests );
- @if [ -n "$(SHARED_LIBS)" ]; then \
- LD_LIBRARY_PATH="`pwd`:$$LD_LIBRARY_PATH"; \
- DYLD_LIBRARY_PATH="`pwd`:$$DYLD_LIBRARY_PATH"; \
- SHLIB_PATH="`pwd`:$$SHLIB_PATH"; \
- LIBPATH="`pwd`:$$LIBPATH"; \
- if [ "$(PLATFORM)" = "Cygwin" ]; then PATH="`pwd`:$$PATH"; fi; \
- LD_PRELOAD="`pwd`/libssl.so `pwd`/libcrypto.so"; \
- export LD_LIBRARY_PATH DYLD_LIBRARY_PATH SHLIB_PATH LIBPATH PATH; \
- export LD_PRELOAD; \
- fi; \
- apps/openssl version -a
+ $(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on tests );
+ util/opensslwrap.sh version -a
report:
@$(PERL) util/selftest.pl
depend:
- @set -e; for i in $(DIRS) ;\
- do \
- if [ -d "$$i" ]; then \
- (cd $$i && echo "making dependencies $$i..." && \
- $(MAKE) SDIRS='${SDIRS}' CFLAG='-DOPENSSL_NO_DEPRECATED ${CFLAG}' DEPFLAG='${DEPFLAG}' MAKEDEPPROG='${MAKEDEPPROG}' KRB5_INCLUDES='${KRB5_INCLUDES}' PERL='${PERL}' depend ) || exit 1; \
- fi; \
- done;
+ @set -e; target=depend; $(RECURSIVE_BUILD_CMD)
lint:
- @set -e; for i in $(DIRS) ;\
- do \
- if [ -d "$$i" ]; then \
- (cd $$i && echo "making lint $$i..." && \
- $(MAKE) SDIRS='${SDIRS}' lint ) || exit 1; \
- fi; \
- done;
+ @set -e; target=lint; $(RECURSIVE_BUILD_CMD)
tags:
- @set -e; for i in $(DIRS) ;\
- do \
- if [ -d "$$i" ]; then \
- (cd $$i && echo "making tags $$i..." && \
- $(MAKE) SDIRS='${SDIRS}' tags ) || exit 1; \
- fi; \
- done;
+ rm -f TAGS
+ find . -name '[^.]*.[ch]' | xargs etags -a
errors:
$(PERL) util/mkerr.pl -recurse -write
(cd engines; $(MAKE) PERL=$(PERL) errors)
+ $(PERL) util/ck_errf.pl */*.c */*/*.c
stacks:
$(PERL) util/mkstack.pl -write
$(PERL) crypto/objects/obj_dat.pl crypto/objects/obj_mac.h crypto/objects/obj_dat.h
crypto/objects/obj_mac.h: crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num
$(PERL) crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num crypto/objects/obj_mac.h
+crypto/objects/obj_xref.h: crypto/objects/objxref.pl crypto/objects/obj_xref.txt crypto/objects/obj_mac.num
+ $(PERL) crypto/objects/objxref.pl > crypto/objects/obj_xref.h
apps/openssl-vms.cnf: apps/openssl.cnf
$(PERL) VMS/VMSify-conf.pl < apps/openssl.cnf > apps/openssl-vms.cnf
+crypto/bn/bn_prime.h: crypto/bn/bn_prime.pl
+ $(PERL) crypto/bn/bn_prime.pl >crypto/bn/bn_prime.h
+
+
TABLE: Configure
(echo 'Output of `Configure TABLE'"':"; \
$(PERL) Configure TABLE) > TABLE
-update: depend errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h apps/openssl-vms.cnf TABLE
+update: errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h crypto/objects/obj_xref.h apps/openssl-vms.cnf crypto/bn/bn_prime.h TABLE depend
# Build distribution tar-file. As the list of files returned by "find" is
# pretty long, on several platforms a "too many arguments" error or similar
dist:
$(PERL) Configure dist
@$(MAKE) dist_pem_h
- @$(MAKE) SDIRS='${SDIRS}' clean
- @$(MAKE) TAR='${TAR}' TARFLAGS='${TARFLAGS}' tar
+ @$(MAKE) SDIRS='$(SDIRS)' clean
+ @$(MAKE) TAR='$(TAR)' TARFLAGS='$(TARFLAGS)' tar
dist_pem_h:
- (cd crypto/pem; $(MAKE) $(BUILDENV) pem.h; $(MAKE) clean)
+ (cd crypto/pem; $(MAKE) -e $(BUILDENV) pem.h; $(MAKE) clean)
install: all install_docs install_sw
(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
done;
- @set -e; for i in $(DIRS) ;\
- do \
- if [ -d "$$i" ]; then \
- (cd $$i; echo "installing $$i..."; \
- $(MAKE) $(BUILDENV) INSTALL_PREFIX='${INSTALL_PREFIX}' OPENSSLDIR='${OPENSSLDIR}' install ); \
- fi; \
- done
+ @set -e; target=install; $(RECURSIVE_BUILD_CMD)
@set -e; for i in $(LIBS) ;\
do \
if [ -f "$$i" ]; then \
chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
else \
- c=`echo $$i | sed 's/^lib/cyg/'`; \
+ c=`echo $$i | sed 's/^lib\(.*\)\.dll\.a/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
- cp $$i.a $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new; \
- chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new; \
- mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.a; \
+ cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+ chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
+ mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
fi ); \
+ if expr $(PLATFORM) : 'mingw' > /dev/null; then \
+ ( case $$i in \
+ *crypto*) i=libeay32.dll;; \
+ *ssl*) i=ssleay32.dll;; \
+ esac; \
+ echo installing $$i; \
+ cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
+ chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
+ mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i ); \
+ fi; \
fi; \
done; \
( here="`pwd`"; \
cd $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
- $(NEWMAKE) -f $$here/Makefile HERE="$$here" link-shared ); \
+ $(MAKE) -f $$here/Makefile HERE="$$here" link-shared ); \
if [ "$(INSTALLTOP)" != "/usr" ]; then \
echo 'OpenSSL shared libraries have been installed in:'; \
echo ' $(INSTALLTOP)'; \
sed -e '1,/^$$/d' doc/openssl-shared.txt; \
fi; \
fi
+ cp libcrypto.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig
+ chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig/libcrypto.pc
+ cp libssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig
+ chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig/libssl.pc
cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig
chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig/openssl.pc
+install_html_docs:
+ here="`pwd`"; \
+ for subdir in apps crypto ssl; do \
+ mkdir -p $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \
+ for i in doc/$$subdir/*.pod; do \
+ fn=`basename $$i .pod`; \
+ echo "installing html/$$fn.$(HTMLSUFFIX)"; \
+ cat $$i \
+ | sed -r 's/L<([^)]*)(\([0-9]\))?\|([^)]*)(\([0-9]\))?>/L<\1|\3>/g' \
+ | pod2html --podroot=doc --htmlroot=.. --podpath=apps:crypto:ssl \
+ | sed -r 's/<!DOCTYPE.*//g' \
+ > $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir/$$fn.$(HTMLSUFFIX); \
+ $(PERL) util/extract-names.pl < $$i | \
+ grep -v $$filecase "^$$fn\$$" | \
+ (cd $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \
+ while read n; do \
+ $$here/util/point.sh $$fn.$(HTMLSUFFIX) "$$n".$(HTMLSUFFIX); \
+ done); \
+ done; \
+ done
+
install_docs:
@$(PERL) $(TOP)/util/mkdir-p.pl \
$(INSTALL_PREFIX)$(MANDIR)/man1 \
@pod2man="`cd util; ./pod2mantest $(PERL)`"; \
here="`pwd`"; \
filecase=; \
- if [ "$(PLATFORM)" = "DJGPP" -o "$(PLATFORM)" = "Cygwin" ]; then \
+ if [ "$(PLATFORM)" = "DJGPP" -o "$(PLATFORM)" = "Cygwin" -o "$(PLATFORM)" = "mingw" ]; then \
filecase=-i; \
fi; \
set -e; for i in doc/apps/*.pod; do \
--release=$(VERSION) `basename $$i`") \
> $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
$(PERL) util/extract-names.pl < $$i | \
- grep -v $$filecase "^$$fn\$$" | \
- grep -v "[ ]" | \
+ (grep -v $$filecase "^$$fn\$$"; true) | \
+ (grep -v "[ ]"; true) | \
(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
while read n; do \
$$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
--release=$(VERSION) `basename $$i`") \
> $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
$(PERL) util/extract-names.pl < $$i | \
- grep -v $$filecase "^$$fn\$$" | \
- grep -v "[ ]" | \
+ (grep -v $$filecase "^$$fn\$$"; true) | \
+ (grep -v "[ ]"; true) | \
(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
while read n; do \
$$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \