dts: riscv: update makefile to also clean the RISC-V dts directory

[oweals/u-boot.git] / Makefile

diff --git a/Makefile b/Makefile
index 7b5e06a63f30438dea9134b85432eb874359767c..aeb1c1455b9d77a53b176b3781a43099a6f30e1a 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -3,7 +3,7 @@
 VERSION = 2018
 PATCHLEVEL = 11
 SUBLEVEL =
-EXTRAVERSION = -rc1
+EXTRAVERSION =
 NAME =
 
 # *DOCUMENTATION*
@@ -689,7 +689,7 @@ libs-y += drivers/dma/
 libs-y += drivers/gpio/
 libs-y += drivers/i2c/
 libs-y += drivers/mtd/
-libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/
+libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/raw/
 libs-y += drivers/mtd/onenand/
 libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/
 libs-y += drivers/mtd/spi/
@@ -1048,9 +1048,11 @@ u-boot.ldr:      u-boot
 
 # binman
 # ---------------------------------------------------------------------------
+# Use 'make BINMAN_DEBUG=1' to enable debugging
 quiet_cmd_binman = BINMAN  $@
-cmd_binman = $(srctree)/tools/binman/binman -d u-boot.dtb -O . \
-               -I . -I $(srctree)/board/$(BOARDDIR) $<
+cmd_binman = $(srctree)/tools/binman/binman -u -d u-boot.dtb -O . -m \
+               -I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \
+               $(if $(BINMAN_DEBUG),-D) $(BINMAN_$(@F)) $<
 
 OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
 
@@ -1074,7 +1076,10 @@ U_BOOT_ITS = $(subst ",,$(CONFIG_SPL_FIT_SOURCE))
 else
 ifneq ($(CONFIG_SPL_FIT_GENERATOR),"")
 U_BOOT_ITS := u-boot.its
-$(U_BOOT_ITS): FORCE
+ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-rockchip/make_fit_atf.py")
+U_BOOT_ITS_DEPS += u-boot
+endif
+$(U_BOOT_ITS): $(U_BOOT_ITS_DEPS) FORCE
        $(srctree)/$(CONFIG_SPL_FIT_GENERATOR) \
        $(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) > $@
 endif
@@ -1136,6 +1141,7 @@ OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
 u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD) FORCE
        $(call if_changed,pad_cat)
 
+ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)
 MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
 
 lpc32xx-spl.img: spl/u-boot-spl.bin FORCE
@@ -1155,6 +1161,7 @@ lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img FORCE
        $(call if_changed,cat)
 
 CLEAN_FILES += lpc32xx-*
+endif
 
 OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
                                   --pad-to=$(CONFIG_TPL_PAD_TO)
@@ -1521,7 +1528,7 @@ $(defaultenv_h): $(CONFIG_DEFAULT_ENV_FILE:"%"=%) FORCE
 # ---------------------------------------------------------------------------
 quiet_cmd_cpp_lds = LDS     $@
 cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) \
-               -D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $<
+               -D__ASSEMBLY__ -x assembler-with-cpp -std=c99 -P -o $@ $<
 
 u-boot.lds: $(LDSCRIPT) prepare FORCE
        $(call if_changed_dep,cpp_lds)
@@ -1695,6 +1702,10 @@ help:
        @echo  'Configuration targets:'
        @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
        @echo  ''
+       @echo  'Test targets:'
+       @echo  ''
+       @echo  '  check           - Run all automated tests that use sandbox'
+       @echo  ''
        @echo  'Other generic targets:'
        @echo  '  all             - Build all necessary images depending on configuration'
        @echo  '  tests           - Build U-Boot for sandbox and run tests'
@@ -1733,7 +1744,7 @@ help:
        @echo  'Execute "make" or "make all" to build all targets marked with [*] '
        @echo  'For further info see the ./README file'
 
-tests:
+tests check:
        $(srctree)/test/run
 
 # Documentation targets