ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.

[oweals/u-boot.git] / Makefile

diff --git a/Makefile b/Makefile
index 17066ca8055f313996bbea94ca19a76e536d1546..8e551eb555d12cf5e910b455872f01ee330c9042 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -146,7 +146,7 @@ ifeq ($(ARCH),microblaze)
 CROSS_COMPILE = mb-
 endif
 ifeq ($(ARCH),blackfin)
-CROSS_COMPILE = bfin-elf-
+CROSS_COMPILE = bfin-uclinux-
 endif
 ifeq ($(ARCH),avr32)
 CROSS_COMPILE = avr32-
@@ -178,7 +178,15 @@ OBJS += cpu/$(CPU)/resetvec.o
 endif
 ifeq ($(CPU),bf533)
 OBJS += cpu/$(CPU)/start1.o    cpu/$(CPU)/interrupt.o  cpu/$(CPU)/cache.o
-OBJS += cpu/$(CPU)/cplbhdlr.o  cpu/$(CPU)/cplbmgr.o    cpu/$(CPU)/flush.o
+OBJS += cpu/$(CPU)/flush.o     cpu/$(CPU)/init_sdram.o
+endif
+ifeq ($(CPU),bf537)
+OBJS += cpu/$(CPU)/start1.o    cpu/$(CPU)/interrupt.o  cpu/$(CPU)/cache.o
+OBJS += cpu/$(CPU)/flush.o     cpu/$(CPU)/init_sdram.o
+endif
+ifeq ($(CPU),bf561)
+OBJS += cpu/$(CPU)/start1.o    cpu/$(CPU)/interrupt.o  cpu/$(CPU)/cache.o
+OBJS += cpu/$(CPU)/flush.o     cpu/$(CPU)/init_sdram.o
 endif
 
 OBJS := $(addprefix $(obj),$(OBJS))
@@ -422,6 +430,7 @@ inka4x0_config:     unconfig
        @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
 
 lite5200b_config       \
+lite5200b_PM_config    \
 lite5200b_LOWBOOT_config:      unconfig
        @mkdir -p $(obj)include
        @mkdir -p $(obj)board/icecube
@@ -430,6 +439,10 @@ lite5200b_LOWBOOT_config:  unconfig
        @ echo "... DDR memory revision"
        @ echo "#define CONFIG_MPC5200"         >>$(obj)include/config.h
        @ echo "#define CONFIG_LITE5200B"       >>$(obj)include/config.h
+       @[ -z "$(findstring _PM_,$@)" ] || \
+               { echo "#define CONFIG_LITE5200B_PM"    >>$(obj)include/config.h ; \
+                 echo "... with power management (low-power mode) support" ; \
+               }
        @[ -z "$(findstring LOWBOOT_,$@)" ] || \
                { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
                  echo "... with LOWBOOT configuration" ; \
@@ -2338,17 +2351,30 @@ suzaku_config:  unconfig
        @echo "#define CONFIG_SUZAKU 1" >> $(obj)include/config.h
        @$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
 
+ml401_config:  unconfig
+       @ >include/config.h
+       @echo "#define CONFIG_ML401 1" >> include/config.h
+       @./mkconfig -a $(@:_config=) microblaze microblaze ml401 xilinx
+
+xupv2p_config: unconfig
+       @ >include/config.h
+       @echo "#define CONFIG_XUPV2P 1" >> include/config.h
+       @./mkconfig -a $(@:_config=) microblaze microblaze xupv2p xilinx
+
 #########################################################################
 ## Blackfin
 #########################################################################
-ezkit533_config        :       unconfig
-       @$(MKCONFIG) $(@:_config=) blackfin bf533 ezkit533
+bf533-ezkit_config:    unconfig
+       @$(MKCONFIG) $(@:_config=) blackfin bf533 bf533-ezkit
+
+bf533-stamp_config:    unconfig
+       @$(MKCONFIG) $(@:_config=) blackfin bf533 bf533-stamp
 
-stamp_config   :       unconfig
-       @$(MKCONFIG) $(@:_config=) blackfin bf533 stamp
+bf537-stamp_config:    unconfig
+       @$(MKCONFIG) $(@:_config=) blackfin bf537 bf537-stamp
 
-dspstamp_config        :       unconfig
-       @$(MKCONFIG) $(@:_config=) blackfin bf533 dsp_stamp
+bf561-ezkit_config:    unconfig
+       @$(MKCONFIG) $(@:_config=) blackfin bf561 bf561-ezkit
 
 #========================================================================
 # AVR32
@@ -2385,6 +2411,8 @@ clean:
        rm -f $(obj)board/netstar/*.srec $(obj)board/netstar/*.bin
        rm -f $(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom
        rm -f $(obj)board/integratorap/u-boot.lds $(obj)board/integratorcp/u-boot.lds
+       rm -f $(obj)board/bf533-ezkit/u-boot.lds $(obj)board/bf533-stamp/u-boot.lds
+       rm -f $(obj)board/bf537-stamp/u-boot.lds $(obj)board/bf561-ezkit/u-boot.lds
        rm -f $(obj)include/bmp_logo.h
        rm -f $(obj)nand_spl/u-boot-spl $(obj)nand_spl/u-boot-spl.map