rockchip: make_fit_atf: use elf entry point

[oweals/u-boot.git] / Makefile

diff --git a/Makefile b/Makefile
index a3d9df81a68a193ff596d679833320fc32767dd3..73a080c2fb92e82b7f14a9bddc137b33fd5850ac 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -1,9 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0+
 
 VERSION = 2018
-PATCHLEVEL = 07
+PATCHLEVEL = 11
 SUBLEVEL =
-EXTRAVERSION =
+EXTRAVERSION = -rc1
 NAME =
 
 # *DOCUMENTATION*
@@ -372,9 +372,13 @@ KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__
 KBUILD_CFLAGS   := -Wall -Wstrict-prototypes \
                   -Wno-format-security \
                   -fno-builtin -ffreestanding $(CSTD_FLAG)
-KBUILD_CFLAGS  += -fshort-wchar
+KBUILD_CFLAGS  += -fshort-wchar -fno-strict-aliasing
 KBUILD_AFLAGS   := -D__ASSEMBLY__
 
+# Don't generate position independent code
+KBUILD_CFLAGS  += $(call cc-option,-fno-PIE)
+KBUILD_AFLAGS  += $(call cc-option,-fno-PIE)
+
 # Read UBOOTRELEASE from include/config/uboot.release (if it exists)
 UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
 UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
@@ -685,7 +689,7 @@ libs-y += drivers/dma/
 libs-y += drivers/gpio/
 libs-y += drivers/i2c/
 libs-y += drivers/mtd/
-libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/
+libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/raw/
 libs-y += drivers/mtd/onenand/
 libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/
 libs-y += drivers/mtd/spi/
@@ -857,6 +861,10 @@ ifneq ($(CONFIG_SYS_INIT_SP_BSS_OFFSET),)
 ALL-y += init_sp_bss_offset_check
 endif
 
+ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
+ALL-y += u-boot-with-dtb.bin
+endif
+
 LDFLAGS_u-boot += $(LDFLAGS_FINAL)
 
 # Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
@@ -979,7 +987,13 @@ spl/u-boot-spl.srec: spl/u-boot-spl FORCE
        $(call if_changed,objcopy)
 
 OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
-               $(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec)
+               $(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec) \
+               $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR),-R .bootpg -R .resetvec)
+
+OBJCOPYFLAGS_u-boot-spl.hex = $(OBJCOPYFLAGS_u-boot.hex)
+
+spl/u-boot-spl.hex: spl/u-boot-spl FORCE
+       $(call if_changed,objcopy)
 
 binary_size_check: u-boot-nodtb.bin FORCE
        @file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \
@@ -1111,8 +1125,8 @@ u-boot.sha1:      u-boot.bin
 u-boot.dis:    u-boot
                $(OBJDUMP) -d $< > $@
 
-ifdef CONFIG_TPL
-SPL_PAYLOAD := tpl/u-boot-with-tpl.bin
+ifneq ($(CONFIG_SPL_PAYLOAD),)
+SPL_PAYLOAD := $(CONFIG_SPL_PAYLOAD:"%"=%)
 else
 SPL_PAYLOAD := u-boot.bin
 endif
@@ -1198,6 +1212,18 @@ u-boot-with-spl.sfp: spl/u-boot-spl.sfp u-boot.img FORCE
        $(call if_changed,socboot)
 endif
 
+ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
+u-boot-with-dtb.bin: u-boot.bin u-boot.dtb \
+       $(if $(CONFIG_MPC85XX_HAVE_RESET_VECTOR), u-boot-br.bin) FORCE
+       $(call if_changed,binman)
+
+ifeq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR),y)
+OBJCOPYFLAGS_u-boot-br.bin := -O binary -j .bootpg -j .resetvec
+u-boot-br.bin: u-boot FORCE
+       $(call if_changed,objcopy)
+endif
+endif
+
 # x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including
 # reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
 # the middle. This is handled by binman based on an image description in the
@@ -1292,8 +1318,12 @@ spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
 ifeq ($(ARCH),arm)
 UBOOT_BINLOAD := u-boot.img
 else
+ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy)
+UBOOT_BINLOAD := u-boot-with-dtb.bin
+else
 UBOOT_BINLOAD := u-boot.bin
 endif
+endif
 
 OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
                          --gap-fill=0xff