# SPDX-License-Identifier: GPL-2.0+
-VERSION = 2018
-PATCHLEVEL = 11
+VERSION = 2019
+PATCHLEVEL = 01
SUBLEVEL =
EXTRAVERSION =
NAME =
libs-y += drivers/mtd/spi/
libs-y += drivers/net/
libs-y += drivers/net/phy/
-libs-y += drivers/pci/
libs-y += drivers/power/ \
drivers/power/domain/ \
drivers/power/fuel_gauge/ \
libs-y += drivers/usb/common/
libs-y += drivers/usb/emul/
libs-y += drivers/usb/eth/
-libs-y += drivers/usb/gadget/
-libs-y += drivers/usb/gadget/udc/
+libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/
+libs-$(CONFIG_USB_GADGET) += drivers/usb/gadget/udc/
libs-y += drivers/usb/host/
libs-y += drivers/usb/musb/
libs-y += drivers/usb/musb-new/
libs-y += env/
libs-$(CONFIG_API) += api/
libs-$(CONFIG_HAS_POST) += post/
-libs-y += test/
-libs-y += test/dm/
+libs-$(CONFIG_UNIT_TEST) += test/ test/dm/
libs-$(CONFIG_UT_ENV) += test/env/
libs-$(CONFIG_UT_OVERLAY) += test/overlay/
>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
quiet_cmd_mkfitimage = MKIMAGE $@
-cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -E $@ \
+cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -E $@ -p $(CONFIG_FIT_EXTERNAL_OFFSET)\
>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
quiet_cmd_cat = CAT $@
all: $(ALL-y) cfg
ifeq ($(CONFIG_DM_I2C_COMPAT)$(CONFIG_SANDBOX),y)
- @echo "===================== WARNING ======================"
- @echo "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
- @echo "(possibly in a subsequent patch in your series)"
- @echo "before sending patches to the mailing list."
- @echo "===================================================="
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
+ @echo >&2 "(possibly in a subsequent patch in your series)"
+ @echo >&2 "before sending patches to the mailing list."
+ @echo >&2 "===================================================="
+endif
+ifeq ($(CONFIG_MMC),y)
+ifneq ($(CONFIG_DM_MMC)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "This board does not use CONFIG_DM_MMC. Please update"
+ @echo >&2 "the board to use CONFIG_DM_MMC before the v2019.04 release."
+ @echo >&2 "Failure to update by the deadline may result in board removal."
+ @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+ @echo >&2 "===================================================="
+endif
+endif
+ifeq ($(CONFIG_USB),y)
+ifneq ($(CONFIG_DM_USB)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "This board does not use CONFIG_DM_USB. Please update"
+ @echo >&2 "the board to use CONFIG_DM_USB before the v2019.07 release."
+ @echo >&2 "Failure to update by the deadline may result in board removal."
+ @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+ @echo >&2 "===================================================="
+endif
+endif
+ifeq ($(CONFIG_LIBATA)$(CONFIG_MVSATA_IDE),y)
+ifneq ($(CONFIG_DM_SCSI),y)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "This board does not use CONFIG_DM_SCSI. Please update"
+ @echo >&2 "the storage controller to use CONFIG_DM_SCSI before the v2019.07 release."
+ @echo >&2 "Failure to update by the deadline may result in board removal."
+ @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+ @echo >&2 "===================================================="
+endif
+endif
+ifeq ($(CONFIG_PCI),y)
+ifneq ($(CONFIG_DM_PCI),y)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "This board does not use CONFIG_DM_PCI Please update"
+ @echo >&2 "the board to use CONFIG_DM_PCI before the v2019.07 release."
+ @echo >&2 "Failure to update by the deadline may result in board removal."
+ @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+ @echo >&2 "===================================================="
+endif
+endif
+ifneq ($(CONFIG_LCD)$(CONFIG_VIDEO),)
+ifneq ($(CONFIG_DM_VIDEO),y)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "This board does not use CONFIG_DM_VIDEO Please update"
+ @echo >&2 "the board to use CONFIG_DM_VIDEO before the v2019.07 release."
+ @echo >&2 "Failure to update by the deadline may result in board removal."
+ @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+ @echo >&2 "===================================================="
+endif
+endif
+ifeq ($(CONFIG_OF_EMBED),y)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "CONFIG_OF_EMBED is enabled. This option should only"
+ @echo >&2 "be used for debugging purposes. Please use"
+ @echo >&2 "CONFIG_OF_SEPARATE for boards in mainline."
+ @echo >&2 "See doc/README.fdt-control for more info."
+ @echo >&2 "===================================================="
+endif
+ifeq ($(CONFIG_SPI),y)
+ifneq ($(CONFIG_DM_SPI)$(CONFIG_OF_CONTROL),yy)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "This board does not use CONFIG_DM_SPI. Please update"
+ @echo >&2 "the board before v2019.04 for no dm conversion"
+ @echo >&2 "and v2019.07 for partially dm converted drivers."
+ @echo >&2 "Failure to update can lead to driver/board removal"
+ @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+ @echo >&2 "===================================================="
+endif
+endif
+ifeq ($(CONFIG_SPI_FLASH),y)
+ifneq ($(CONFIG_DM_SPI_FLASH)$(CONFIG_OF_CONTROL),yy)
+ @echo >&2 "===================== WARNING ======================"
+ @echo >&2 "This board does not use CONFIG_DM_SPI_FLASH. Please update"
+ @echo >&2 "the board to use CONFIG_SPI_FLASH before the v2019.07 release."
+ @echo >&2 "Failure to update by the deadline may result in board removal."
+ @echo >&2 "See doc/driver-model/MIGRATION.txt for more info."
+ @echo >&2 "===================================================="
+endif
endif
@# Check that this build does not use CONFIG options that we do not
@# know about unless they are in Kconfig. All the existing CONFIG
else
ifneq ($(CONFIG_SPL_FIT_GENERATOR),"")
U_BOOT_ITS := u-boot.its
+ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-imx/mkimage_fit_atf.sh")
+U_BOOT_ITS_DEPS += u-boot-nodtb.bin
+endif
ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-rockchip/make_fit_atf.py")
U_BOOT_ITS_DEPS += u-boot
endif
SPL: spl/u-boot-spl.bin FORCE
$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+ifeq ($(CONFIG_ARCH_IMX8M), y)
+flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
+endif
+
u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE
$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@