VERSION = 1
-PATCHLEVEL = 2
-SUBLEVEL = 2
+PATCHLEVEL = 6
+SUBLEVEL = 0
EXTRAVERSION = .svn
NAME = Unnamed
# In both cases the working directory must be the root of the kernel src.
# 1) O=
# Use "make O=dir/to/store/output/files/"
-#
+#
# 2) Set KBUILD_OUTPUT
# Set the environment variable KBUILD_OUTPUT to point to the directory
# where the output files shall be placed.
# SUBARCH tells the usermode build what the underlying arch is. That is set
# first, and if a usermode build is happening, the "ARCH=um" on the command
# line overrides the setting of ARCH below. If a native build is happening,
-# then ARCH is assigned, getting whatever value it gets normally, and
+# then ARCH is assigned, getting whatever value it gets normally, and
# SUBARCH is subsequently ignored.
SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
#
# If $(quiet) is empty, the whole command will be printed.
-# If it is set to "quiet_", only the short version will be printed.
+# If it is set to "quiet_", only the short version will be printed.
# If it is set to "silent_", nothing wil be printed at all, since
# the variable $(silent_cmd_cc_o_c) doesn't exist.
#
# Make variables (CC, etc...)
AS = $(CROSS_COMPILE)as
-LD = $(CROSS_COMPILE)ld
CC = $(CROSS_COMPILE)gcc
+LD = $(CC) -nostdlib
CPP = $(CC) -E
AR = $(CROSS_COMPILE)ar
NM = $(CROSS_COMPILE)nm
# Use LINUXINCLUDE when you must reference the include/ directory.
# Needed to be compatible with the O= option
-CFLAGS :=
-CPPFLAGS :=
-AFLAGS :=
+CFLAGS := $(CFLAGS)
+CPPFLAGS := $(CPPFLAGS)
+AFLAGS := $(AFLAGS)
# Read KERNELRELEASE from .kernelrelease (if it exists)
KERNELRELEASE = $(shell cat .kernelrelease 2> /dev/null)
HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
export CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
-export CFLAGS CFLAGS_KERNEL CFLAGS_MODULE
+export CFLAGS CFLAGS_KERNEL CFLAGS_MODULE
export AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
# When compiling out-of-tree modules, put MODVERDIR in the module
# catch them early, and hand them over to scripts/kconfig/Makefile
# It is allowed to specify more targets when calling make, including
# mixing *config targets and build targets.
-# For example 'make oldconfig all'.
+# For example 'make oldconfig all'.
# Detect when mixed targets is specified, and make a second invocation
# of make so .config is not included in this case either (for *config).
coreutils/libcoreutils/ \
debianutils/ \
e2fsprogs/ \
- e2fsprogs/blkid/ \
- e2fsprogs/e2p/ \
- e2fsprogs/ext2fs/ \
- e2fsprogs/uuid/ \
editors/ \
findutils/ \
init/ \
networking/udhcp/ \
procps/ \
runit/ \
+ selinux/ \
shell/ \
sysklogd/ \
util-linux/ \
# The all: target is the default when no target is given on the
# command line.
# This allow a user to issue only 'make' to build a kernel including modules
-# Defaults busybox but it is usually overriden in the arch makefile
+# Defaults busybox but it is usually overridden in the arch makefile
all: busybox
-include $(srctree)/arch/$(ARCH)/Makefile
libs-y2 := $(patsubst %/, %/built-in.o, $(libs-y))
libs-y := $(libs-y1) $(libs-y2)
-
# Build busybox
# ---------------------------------------------------------------------------
# busybox is build from the objects selected by $(busybox-init) and
# Rule to link busybox - also used during CONFIG_KALLSYMS
# May be overridden by arch/$(ARCH)/Makefile
quiet_cmd_busybox__ ?= LINK $@
-ifdef CONFIG_STATIC
- cmd_busybox__ ?= $(srctree)/scripts/trylink $(CC) \
- -static \
- -o $@ \
- -Wl,--warn-common -Wl,--sort-common -Wl,--gc-sections \
- -Wl,--start-group $(busybox-all) -Wl,--end-group
-else
- cmd_busybox__ ?= $(srctree)/scripts/trylink $(CC) -o $@ \
+ cmd_busybox__ ?= $(srctree)/scripts/trylink $(CC) $(LDFLAGS) \
+ -o $@ -Wl,-M \
-Wl,--warn-common -Wl,--sort-common -Wl,--gc-sections \
-Wl,--start-group $(busybox-all) -Wl,--end-group
-endif
# Generate System.map
-quiet_cmd_sysmap = SYSMAP
+quiet_cmd_sysmap = SYSMAP
cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap
# Link of busybox
# First command is ':' to allow us to use + in front of this rule
cmd_ksym_ld = $(cmd_busybox__)
define rule_ksym_ld
- :
+ :
+$(call cmd,busybox_version)
$(call cmd,busybox__)
$(Q)echo 'cmd_$@ := $(cmd_busybox__)' > $(@D)/.$(@F).cmd
$(Q)$(STRIP) -s --remove-section=.note --remove-section=.comment \
busybox_unstripped -o $@
-# The actual objects are generated when descending,
+# The actual objects are generated when descending,
# make sure no implicit rule kicks in
$(sort $(busybox-all)): $(busybox-dirs) ;
localver = $(subst $(space),, \
$(shell cat /dev/null $(_localver)) \
$(patsubst "%",%,$(CONFIG_LOCALVERSION)))
-
+
# If CONFIG_LOCALVERSION_AUTO is set scripts/setlocalversion is called
# and if the SCM is know a tag from the SCM is appended.
# The appended tag is determinded by the SCM used.
#bbox# @ln -fsn asm-$(ARCH) $@
# Split autoconf.h into include/linux/config/*
+quiet_cmd_gen_bbconfigopts = GEN include/bbconfigopts.h
+ cmd_gen_bbconfigopts = $(srctree)/scripts/mkconfigs > include/bbconfigopts.h
+quiet_cmd_split_autoconf = SPLIT include/autoconf.h -> include/config/*
+ cmd_split_autoconf = scripts/basic/split-include include/autoconf.h include/config
#bbox# piggybacked generation of few .h files
include/config/MARKER: scripts/basic/split-include include/autoconf.h
- @echo ' SPLIT include/autoconf.h -> include/config/*'
- @scripts/basic/split-include include/autoconf.h include/config
- @echo ' GEN include/bbconfigopts.h'
- @$(srctree)/scripts/mkconfigs >include/bbconfigopts.h
+ $(call cmd,split_autoconf)
+ $(call cmd,gen_bbconfigopts)
@touch $@
# Generate some files
modules modules_install: FORCE
@echo
- @echo "The present kernel configuration has modules disabled."
+ @echo "The present busybox configuration has modules disabled."
@echo "Type 'make config' and enable loadable module support."
@echo "Then build a kernel with module support enabled."
@echo
# Directories & files removed with 'make clean'
CLEAN_DIRS += $(MODVERDIR)
-CLEAN_FILES += busybox* System.map \
+CLEAN_FILES += busybox* System.map .kernelrelease \
.tmp_kallsyms* .tmp_version .tmp_busybox* .tmp_System.map
# Directories & files removed with 'make mrproper'
$(build)=$(build-dir) $(@:.ko=.o)
$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
-# FIXME Should go into a make.lib or something
+# FIXME Should go into a make.lib or something
# ===========================================================================
quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
projects / oweals / busybox.git / blobdiff