-# Makefile for busybox
+VERSION = 1
+PATCHLEVEL = 30
+SUBLEVEL = 0
+EXTRAVERSION = .git
+NAME = Unnamed
+
+# *DOCUMENTATION*
+# To see a list of typical targets execute "make help"
+# More info can be located in ./README
+# Comments in this file are targeted only to the developer, do not
+# expect to learn how to build the kernel reading this file.
+
+# Do not print "Entering directory ..."
+MAKEFLAGS += --no-print-directory
+
+# We are using a recursive build, so we need to do a little thinking
+# to get the ordering right.
#
-# Copyright (C) 1999-2004 by Erik Andersen <andersen@codepoet.org>
+# Most importantly: sub-Makefiles should only ever modify files in
+# their own directory. If in some directory we have a dependency on
+# a file in another dir (which doesn't happen often, but it's often
+# unavoidable when linking the built-in.o targets which finally
+# turn into busybox), we will call a sub make in that other dir, and
+# after that we are sure that everything which is in that other dir
+# is now up to date.
#
-# Licensed under GPLv2, see the file LICENSE in this tarball for details.
-#
-
-# You shouldn't have to edit anything in this file for configuration
-# purposes, try "make help" or read http://busybox.net/FAQ.html.
+# The only cases where we need to modify files which have global
+# effects are thus separated out and done before the recursive
+# descending is started. They are now explicitly listed as the
+# prepare rule.
-.PHONY: dummy subdirs release distclean clean config oldconfig menuconfig \
- tags check test depend dep buildtree hosttools _all checkhelp \
- sizes bloatcheck baseline objsizes
+# To put more focus on warnings, be less verbose as default
+# Use 'make V=1' to see the full commands
-noconfig_targets := menuconfig config oldconfig randconfig hosttools \
- defconfig allyesconfig allnoconfig allbareconfig \
- clean distclean help \
- release tags
+ifdef V
+ ifeq ("$(origin V)", "command line")
+ KBUILD_VERBOSE = $(V)
+ endif
+endif
+ifndef KBUILD_VERBOSE
+ KBUILD_VERBOSE = 0
+endif
-nocheck_targets := clean distclean help release tags
+# Call sparse as part of compilation of C files
+# Use 'make C=1' to enable sparse checking
-# the toplevel sourcedir
-ifndef top_srcdir
-top_srcdir=$(CURDIR)
+ifdef C
+ ifeq ("$(origin C)", "command line")
+ KBUILD_CHECKSRC = $(C)
+ endif
endif
-# toplevel directory of the object-tree
-ifndef top_builddir
-top_builddir=$(CURDIR)
+ifndef KBUILD_CHECKSRC
+ KBUILD_CHECKSRC = 0
endif
-export srctree=$(top_srcdir)
-vpath %/Config.in $(srctree)
+# Use make M=dir to specify directory of external module to build
+# Old syntax make ... SUBDIRS=$PWD is still supported
+# Setting the environment variable KBUILD_EXTMOD take precedence
+ifdef SUBDIRS
+ KBUILD_EXTMOD ?= $(SUBDIRS)
+endif
+ifdef M
+ ifeq ("$(origin M)", "command line")
+ KBUILD_EXTMOD := $(M)
+ endif
+endif
-DIRS:=applets archival archival/libunarchive coreutils console-tools \
- debianutils editors findutils init miscutils modutils networking \
- networking/libiproute networking/udhcp procps loginutils shell \
- sysklogd util-linux e2fsprogs libpwdgrp coreutils/libcoreutils libbb
-SRC_DIRS:=$(patsubst %,$(top_srcdir)/%,$(DIRS))
+# kbuild supports saving output files in a separate directory.
+# To locate output files in a separate directory two syntaxes are supported.
+# In both cases the working directory must be the root of the kernel src.
+# 1) O=
+# Use "make O=dir/to/store/output/files/"
+#
+# 2) Set KBUILD_OUTPUT
+# Set the environment variable KBUILD_OUTPUT to point to the directory
+# where the output files shall be placed.
+# export KBUILD_OUTPUT=dir/to/store/output/files/
+# make
+#
+# The O= assignment takes precedence over the KBUILD_OUTPUT environment
+# variable.
-# That's our default target when none is given on the command line
-_all:
-CONFIG_CONFIG_IN = $(top_srcdir)/Config.in
+# KBUILD_SRC is set on invocation of make in OBJ directory
+# KBUILD_SRC is not intended to be used by the regular user (for now)
+ifeq ($(KBUILD_SRC),)
-ifeq ($(BUILD_SRC),)
+# OK, Make called in directory where kernel src resides
+# Do we want to locate output files in a separate directory?
ifdef O
ifeq ("$(origin O)", "command line")
- BUILD_OUTPUT := $(O)
- top_builddir := $(O)
+ KBUILD_OUTPUT := $(O)
endif
+endif
+
+# That's our default target when none is given on the command line
+PHONY := _all
+_all:
+
+ifneq ($(KBUILD_OUTPUT),)
+# Invoke a second make in the output directory, passing relevant variables
+# check that the output directory actually exists
+saved-output := $(KBUILD_OUTPUT)
+KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
+$(if $(KBUILD_OUTPUT),, \
+ $(error output directory "$(saved-output)" does not exist))
+
+PHONY += $(MAKECMDGOALS)
+
+$(filter-out _all,$(MAKECMDGOALS)) _all:
+ $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
+ KBUILD_SRC=$(CURDIR) \
+ KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile $@
+
+# Leave processing to above invocation of make
+skip-makefile := 1
+endif # ifneq ($(KBUILD_OUTPUT),)
+endif # ifeq ($(KBUILD_SRC),)
+
+# We process the rest of the Makefile if this is the final invocation of make
+ifeq ($(skip-makefile),)
+
+# If building an external module we do not care about the all: rule
+# but instead _all depend on modules
+PHONY += all
+ifeq ($(KBUILD_EXTMOD),)
+_all: all
else
-# If no alternate output-dir was specified, we build in cwd
-# We are using BUILD_OUTPUT nevertheless to make sure that we create
-# Rules.mak and the toplevel Makefile, in case they don't exist.
- BUILD_OUTPUT := $(top_builddir)
+_all: modules
endif
-# see if we are in verbose mode
-BUILD_VERBOSE :=
-ifdef V
- ifeq ("$(origin V)", "command line")
- BUILD_VERBOSE := $(V)
- endif
+srctree := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
+TOPDIR := $(srctree)
+# FIXME - TOPDIR is obsolete, use srctree/objtree
+objtree := $(CURDIR)
+src := $(srctree)
+obj := $(objtree)
+
+VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
+
+export srctree objtree VPATH TOPDIR
+
+
+# Cross compiling and selecting different set of gcc/bin-utils
+# ---------------------------------------------------------------------------
+#
+# When performing cross compilation for other architectures ARCH shall be set
+# to the target architecture. (See arch/* for the possibilities).
+# ARCH can be set during invocation of make:
+# make ARCH=ia64
+# Another way is to have ARCH set in the environment.
+# The default ARCH is the host where make is executed.
+
+# CROSS_COMPILE specify the prefix used for all executables used
+# during compilation. Only gcc and related bin-utils executables
+# are prefixed with $(CROSS_COMPILE).
+# CROSS_COMPILE can be set on the command line
+# make CROSS_COMPILE=ia64-linux-
+# Alternatively CROSS_COMPILE can be set in the environment.
+# Default value for CROSS_COMPILE is not to prefix executables
+# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
+
+CROSS_COMPILE ?=
+# bbox: we may have CONFIG_CROSS_COMPILER_PREFIX in .config,
+# and it has not been included yet... thus using an awkward syntax.
+ifeq ($(CROSS_COMPILE),)
+CROSS_COMPILE := $(shell grep ^CONFIG_CROSS_COMPILER_PREFIX .config 2>/dev/null)
+CROSS_COMPILE := $(subst CONFIG_CROSS_COMPILER_PREFIX=,,$(CROSS_COMPILE))
+CROSS_COMPILE := $(subst ",,$(CROSS_COMPILE))
+#")
endif
-ifdef VERBOSE
- ifeq ("$(origin VERBOSE)", "command line")
- BUILD_VERBOSE := $(VERBOSE)
- endif
+
+# SUBARCH tells the usermode build what the underlying arch is. That is set
+# first, and if a usermode build is happening, the "ARCH=um" on the command
+# line overrides the setting of ARCH below. If a native build is happening,
+# then ARCH is assigned, getting whatever value it gets normally, and
+# SUBARCH is subsequently ignored.
+
+ifneq ($(CROSS_COMPILE),)
+SUBARCH := $(shell echo $(CROSS_COMPILE) | cut -d- -f1 | sed 's:^.*/::g')
+else
+SUBARCH := $(shell uname -m)
+endif
+SUBARCH := $(shell echo $(SUBARCH) | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
+ -e s/arm.*/arm/ -e s/sa110/arm/ \
+ -e s/s390x/s390/ -e s/parisc64/parisc/ \
+ -e s/ppc.*/powerpc/ -e s/mips.*/mips/ )
+
+ARCH ?= $(SUBARCH)
+
+# Architecture as present in compile.h
+UTS_MACHINE := $(ARCH)
+
+# SHELL used by kbuild
+CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
+ else if [ -x /bin/bash ]; then echo /bin/bash; \
+ else echo sh; fi ; fi)
+
+# Decide whether to build built-in, modular, or both.
+# Normally, just do built-in.
+
+KBUILD_MODULES :=
+KBUILD_BUILTIN := 1
+
+# If we have only "make modules", don't compile built-in objects.
+# When we're building modules with modversions, we need to consider
+# the built-in objects during the descend as well, in order to
+# make sure the checksums are uptodate before we record them.
+
+ifeq ($(MAKECMDGOALS),modules)
+ KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
endif
-ifneq ($(strip $(BUILD_VERBOSE)),)
- export BUILD_VERBOSE
- CHECK_VERBOSE := -v
-# ARFLAGS+=v
+# If we have "make <whatever> modules", compile modules
+# in addition to whatever we do anyway.
+# Just "make" or "make all" shall build modules as well
+
+ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
+ KBUILD_MODULES := 1
endif
-ifneq ($(strip $(HAVE_DOT_CONFIG)),y)
-# pull in settings early
--include $(top_srcdir)/Rules.mak
+ifeq ($(MAKECMDGOALS),)
+ KBUILD_MODULES := 1
endif
-# All object directories.
-OBJ_DIRS := $(DIRS)
-all_tree := $(patsubst %,$(top_builddir)/%,$(OBJ_DIRS) scripts scripts/config include)
-all_tree: $(all_tree)
-$(all_tree):
- @mkdir -p "$@"
+export KBUILD_MODULES KBUILD_BUILTIN
+export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
-ifneq ($(BUILD_OUTPUT),)
-# Invoke a second make in the output directory, passing relevant variables
-# Check that the output directory actually exists
-saved-output := $(BUILD_OUTPUT)
-BUILD_OUTPUT := $(shell cd $(BUILD_OUTPUT) && /bin/pwd)
-$(if $(wildcard $(BUILD_OUTPUT)),, \
- $(error output directory "$(saved-output)" does not exist))
+# Beautify output
+# ---------------------------------------------------------------------------
+#
+# Normally, we echo the whole command before executing it. By making
+# that echo $($(quiet)$(cmd)), we now have the possibility to set
+# $(quiet) to choose other forms of output instead, e.g.
+#
+# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
+# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
+#
+# If $(quiet) is empty, the whole command will be printed.
+# If it is set to "quiet_", only the short version will be printed.
+# If it is set to "silent_", nothing wil be printed at all, since
+# the variable $(silent_cmd_cc_o_c) doesn't exist.
+#
+# A simple variant is to prefix commands with $(Q) - that's useful
+# for commands that shall be hidden in non-verbose mode.
+#
+# $(Q)ln $@ :<
+#
+# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
+# If KBUILD_VERBOSE equals 1 then the above command is displayed.
-.PHONY: $(MAKECMDGOALS)
+ifeq ($(KBUILD_VERBOSE),1)
+ quiet =
+ Q =
+else
+ quiet=quiet_
+ Q = @
+endif
-$(filter-out _all,$(MAKECMDGOALS)) _all: $(BUILD_OUTPUT)/Rules.mak $(BUILD_OUTPUT)/Makefile all_tree
- $(Q)$(MAKE) -C $(BUILD_OUTPUT) \
- top_srcdir=$(top_srcdir) \
- top_builddir=$(top_builddir) \
- BUILD_SRC=$(top_srcdir) \
- -f $(CURDIR)/Makefile $@
+# If the user is running make -s (silent mode), suppress echoing of
+# commands
-$(BUILD_OUTPUT)/Rules.mak:
- @echo > $@
- @echo top_srcdir=$(top_srcdir) >> $@
- @echo top_builddir=$(BUILD_OUTPUT) >> $@
- @echo include $(top_srcdir)/Rules.mak >> $@
+ifneq ($(findstring s,$(MAKEFLAGS)),)
+ quiet=silent_
+endif
-$(BUILD_OUTPUT)/Makefile:
- @echo > $@
- @echo top_srcdir=$(top_srcdir) >> $@
- @echo top_builddir=$(BUILD_OUTPUT) >> $@
- @echo BUILD_SRC='$$(top_srcdir)' >> $@
- @echo include '$$(BUILD_SRC)'/Makefile >> $@
+export quiet Q KBUILD_VERBOSE
+
+
+# Look for make include files relative to root of kernel src
+MAKEFLAGS += --include-dir=$(srctree)
+
+HOSTCC = gcc
+HOSTCXX = g++
+HOSTCFLAGS :=
+HOSTCXXFLAGS :=
+# We need some generic definitions
+include $(srctree)/scripts/Kbuild.include
+
+HOSTCFLAGS += $(call hostcc-option,-Wall -Wstrict-prototypes -O2 -fomit-frame-pointer,)
+HOSTCXXFLAGS += -O2
+
+# For maximum performance (+ possibly random breakage, uncomment
+# the following)
+
+MAKEFLAGS += -rR
+
+# Make variables (CC, etc...)
+
+AS = $(CROSS_COMPILE)as
+CC = $(CROSS_COMPILE)gcc
+LD = $(CC) -nostdlib
+CPP = $(CC) -E
+AR = $(CROSS_COMPILE)ar
+NM = $(CROSS_COMPILE)nm
+STRIP = $(CROSS_COMPILE)strip
+OBJCOPY = $(CROSS_COMPILE)objcopy
+OBJDUMP = $(CROSS_COMPILE)objdump
+PKG_CONFIG ?= $(CROSS_COMPILE)pkg-config
+AWK = awk
+GENKSYMS = scripts/genksyms/genksyms
+DEPMOD = /sbin/depmod
+KALLSYMS = scripts/kallsyms
+PERL = perl
+CHECK = sparse
+
+CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ -Wbitwise $(CF)
+MODFLAGS = -DMODULE
+CFLAGS_MODULE = $(MODFLAGS)
+AFLAGS_MODULE = $(MODFLAGS)
+LDFLAGS_MODULE = -r
+CFLAGS_KERNEL =
+AFLAGS_KERNEL =
+
+
+# Use LINUXINCLUDE when you must reference the include/ directory.
+# Needed to be compatible with the O= option
+CFLAGS := $(CFLAGS)
+# Added only to final link stage of busybox binary
+CFLAGS_busybox := $(CFLAGS_busybox)
+CPPFLAGS := $(CPPFLAGS)
+AFLAGS := $(AFLAGS)
+LDFLAGS := $(LDFLAGS)
+LDLIBS :=
+
+# Read KERNELRELEASE from .kernelrelease (if it exists)
+KERNELRELEASE = $(shell cat .kernelrelease 2> /dev/null)
+KERNELVERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
+
+export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION \
+ ARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC \
+ CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE \
+ HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
+
+export CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
+export CFLAGS CFLAGS_KERNEL CFLAGS_MODULE
+export AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
+export FLTFLAGS
+
+# When compiling out-of-tree modules, put MODVERDIR in the module
+# tree rather than in the kernel tree. The kernel tree might
+# even be read-only.
+export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
+
+# Files to ignore in find ... statements
+
+RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg -o -name .git \) -prune -o
+export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg --exclude .git
+
+# ===========================================================================
+# Rules shared between *config targets and build targets
+
+# Basic helpers built in scripts/
+PHONY += scripts_basic
+scripts_basic:
+ $(Q)$(MAKE) $(build)=scripts/basic
+
+# To avoid any implicit rule to kick in, define an empty command.
+scripts/basic/%: scripts_basic ;
+
+# This target generates Kbuild's and Config.in's from *.c files
+PHONY += gen_build_files
+gen_build_files: $(wildcard $(srctree)/*/*.c) $(wildcard $(srctree)/*/*/*.c) $(wildcard $(srctree)/embed/*)
+ $(Q)$(srctree)/scripts/gen_build_files.sh $(srctree) $(objtree)
+
+# bbox: we have helpers in applets/
+# we depend on scripts_basic, since scripts/basic/fixdep
+# must be built before any other host prog
+PHONY += applets_dir
+applets_dir: scripts_basic gen_build_files include/config/MARKER
+ $(Q)$(MAKE) $(build)=applets
+
+applets/%: applets_dir ;
+
+PHONY += outputmakefile
+# outputmakefile generates a Makefile in the output directory, if using a
+# separate output directory. This allows convenient use of make in the
+# output directory.
+outputmakefile:
+ifneq ($(KBUILD_SRC),)
+ $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
+ $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
+endif
-# Leave processing to above invocation of make
-skip-makefile := 1
-endif # ifneq ($(BUILD_OUTPUT),)
-endif # ifeq ($(BUILD_SRC),)
+# To make sure we do not include .config for any of the *config targets
+# catch them early, and hand them over to scripts/kconfig/Makefile
+# It is allowed to specify more targets when calling make, including
+# mixing *config targets and build targets.
+# For example 'make oldconfig all'.
+# Detect when mixed targets is specified, and make a second invocation
+# of make so .config is not included in this case either (for *config).
+
+no-dot-config-targets := clean mrproper distclean \
+ cscope TAGS tags help %docs
+#bbox# check% is removed from above
+
+config-targets := 0
+mixed-targets := 0
+dot-config := 1
+
+ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
+ ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
+ dot-config := 0
+ endif
+endif
-ifeq ($(skip-makefile),)
+ifeq ($(KBUILD_EXTMOD),)
+ ifneq ($(filter config %config,$(MAKECMDGOALS)),)
+ config-targets := 1
+ ifneq ($(filter-out config %config,$(MAKECMDGOALS)),)
+ mixed-targets := 1
+ endif
+ endif
+endif
-# We only need a copy of the Makefile for the config targets and reuse
-# the rest from the source directory, i.e. we do not cp ALL_MAKEFILES.
-scripts/config/Makefile: $(top_srcdir)/scripts/config/Makefile
- cp $< $@
+ifeq ($(mixed-targets),1)
+# ===========================================================================
+# We're called with mixed targets (*config and build targets).
+# Handle them one by one.
-_all: all
+%:: FORCE
+ $(Q)$(MAKE) -C $(srctree) KBUILD_SRC= $@
-help:
- @echo 'Cleaning:'
- @echo ' clean - delete temporary files created by build'
- @echo ' distclean - delete all non-source files (including .config)'
- @echo
- @echo 'Build:'
- @echo ' all - Executable and documentation'
- @echo ' busybox - the swiss-army executable'
- @echo ' doc - docs/BusyBox.{txt,html,1}'
- @echo ' html - create html-based cross-reference'
- @echo
- @echo 'Configuration:'
- @echo ' allnoconfig - disable all symbols in .config'
- @echo ' allyesconfig - enable all symbols in .config (see defconfig)'
- @echo ' allbareconfig - enable all applets without any sub-features'
- @echo ' config - text based configurator (of last resort)'
- @echo ' defconfig - set .config to largest generic configuration'
- @echo ' menuconfig - interactive curses-based configurator'
- @echo ' oldconfig - resolve any unresolved symbols in .config'
- @echo ' hosttools - build sed for the host.'
- @echo ' You can use these commands if the commands on the host'
- @echo ' is unusable. Afterwards use it like:'
- @echo ' make SED="$(top_builddir)/sed"'
- @echo
- @echo 'Installation:'
- @echo ' install - install busybox into $(PREFIX)'
- @echo ' uninstall'
- @echo
- @echo 'Development:'
- @echo ' baseline - create busybox_old for bloatcheck.'
- @echo ' bloatcheck - show size difference between old and new versions'
- @echo ' check - run the test suite for all applets'
- @echo ' checkhelp - check for missing help-entries in Config.in'
- @echo ' randconfig - generate a random configuration'
- @echo ' release - create a distribution tarball'
- @echo ' sizes - show size of all enabled busybox symbols'
- @echo ' objsizes - show size of each .o object built'
- @echo
+else
+ifeq ($(config-targets),1)
+# ===========================================================================
+# *config targets only - make sure prerequisites are updated, and descend
+# in scripts/kconfig to make the *config target
+
+# Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
+# KBUILD_DEFCONFIG may point out an alternative default configuration
+# used for 'make defconfig'
+-include $(srctree)/arch/$(ARCH)/Makefile
+export KBUILD_DEFCONFIG
+
+config: scripts_basic outputmakefile gen_build_files FORCE
+ $(Q)mkdir -p include
+ $(Q)$(MAKE) $(build)=scripts/kconfig $@
+ $(Q)$(MAKE) -C $(srctree) KBUILD_SRC= .kernelrelease
+
+%config: scripts_basic outputmakefile gen_build_files FORCE
+ $(Q)mkdir -p include
+ $(Q)$(MAKE) $(build)=scripts/kconfig $@
+ $(Q)$(MAKE) -C $(srctree) KBUILD_SRC= .kernelrelease
+
+else
+# ===========================================================================
+# Build targets only - this includes busybox, arch specific targets, clean
+# targets and others. In general all targets except *config targets.
+
+ifeq ($(KBUILD_EXTMOD),)
+# Additional helpers built in scripts/
+# Carefully list dependencies so we do not try to build scripts twice
+# in parallel
+PHONY += scripts
+scripts: gen_build_files scripts_basic include/config/MARKER
+ $(Q)$(MAKE) $(build)=$(@)
+
+scripts_basic: include/autoconf.h
+
+# Objects we will link into busybox / subdirs we need to visit
+core-y := \
+ applets/ \
+
+libs-y := \
+ archival/ \
+ archival/libarchive/ \
+ console-tools/ \
+ coreutils/ \
+ coreutils/libcoreutils/ \
+ debianutils/ \
+ klibc-utils/ \
+ e2fsprogs/ \
+ editors/ \
+ findutils/ \
+ init/ \
+ libbb/ \
+ libpwdgrp/ \
+ loginutils/ \
+ mailutils/ \
+ miscutils/ \
+ modutils/ \
+ networking/ \
+ networking/libiproute/ \
+ networking/udhcp/ \
+ printutils/ \
+ procps/ \
+ runit/ \
+ selinux/ \
+ shell/ \
+ sysklogd/ \
+ util-linux/ \
+ util-linux/volume_id/ \
+
+endif # KBUILD_EXTMOD
+
+ifeq ($(dot-config),1)
+# In this section, we need .config
+# Read in dependencies to all Kconfig* files, make sure to run
+# oldconfig if changes are detected.
+-include .kconfig.d
-include $(top_srcdir)/Rules.mak
+-include .config
-ifneq ($(strip $(HAVE_DOT_CONFIG)),y)
+# If .config needs to be updated, it will be done via the dependency
+# that autoconf has on .config.
+# To avoid any implicit rule to kick in, define an empty command
+.config .kconfig.d: ;
-# Default target if none was requested explicitly
-all: menuconfig
+-include $(srctree)/arch/$(ARCH)/Makefile
-# warn if no configuration exists and we are asked to build a non-config target
-.config:
- @echo ""
- @echo "No $(top_builddir)/$@ found!"
- @echo "Please refer to 'make help', section Configuration."
- @echo ""
- @exit 1
+# Now we can define CFLAGS etc according to .config
+include $(srctree)/Makefile.flags
+
+# If .config is newer than include/autoconf.h, someone tinkered
+# with it and forgot to run make oldconfig.
+# If kconfig.d is missing then we are probarly in a cleaned tree so
+# we execute the config step to be sure to catch updated Kconfig files
+include/autoconf.h: .kconfig.d .config $(wildcard $(srctree)/*/*.c) $(wildcard $(srctree)/*/*/*.c) | gen_build_files
+ $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
+
+include/usage.h: gen_build_files
+
+else
+# Dummy target needed, because used as prerequisite
+include/autoconf.h: ;
+endif
+
+# The all: target is the default when no target is given on the
+# command line.
+# This allow a user to issue only 'make' to build a kernel including modules
+# Defaults busybox but it is usually overridden in the arch makefile
+all: busybox doc
+
+# arch Makefile may override CC so keep this after arch Makefile is included
+#bbox# NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
+CHECKFLAGS += $(NOSTDINC_FLAGS)
+
+# Default kernel image to build when no specific target is given.
+# KBUILD_IMAGE may be overruled on the commandline or
+# set in the environment
+# Also any assignments in arch/$(ARCH)/Makefile take precedence over
+# this default value
+export KBUILD_IMAGE ?= busybox
+
+#
+# INSTALL_PATH specifies where to place the updated kernel and system map
+# images. Default is /boot, but you can set it to other values
+export INSTALL_PATH ?= /boot
+
+#
+# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
+# relocations required by build roots. This is not defined in the
+# makefile but the argument can be passed to make if needed.
+#
+
+MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
+export MODLIB
+
+
+ifeq ($(KBUILD_EXTMOD),)
+busybox-dirs := $(patsubst %/,%,$(filter %/, $(core-y) $(core-m) $(libs-y) $(libs-m)))
+
+busybox-alldirs := $(sort $(busybox-dirs) $(patsubst %/,%,$(filter %/, \
+ $(core-n) $(core-) $(libs-n) $(libs-) \
+ )))
+
+core-y := $(patsubst %/, %/built-in.o, $(core-y))
+libs-y1 := $(patsubst %/, %/lib.a, $(libs-y))
+libs-y2 := $(patsubst %/, %/built-in.o, $(libs-y))
+libs-y := $(libs-y1) $(libs-y2)
-# configuration
+# Build busybox
# ---------------------------------------------------------------------------
+# busybox is build from the objects selected by $(busybox-init) and
+# $(busybox-main). Most are built-in.o files from top-level directories
+# in the kernel tree, others are specified in arch/$(ARCH)Makefile.
+# Ordering when linking is important, and $(busybox-init) must be first.
+#
+# busybox
+# ^
+# |
+# +-< $(busybox-init)
+# | +--< init/version.o + more
+# |
+# +--< $(busybox-main)
+# | +--< driver/built-in.o mm/built-in.o + more
+# |
+# +-< kallsyms.o (see description in CONFIG_KALLSYMS section)
+#
+# busybox version (uname -v) cannot be updated during normal
+# descending-into-subdirs phase since we do not yet know if we need to
+# update busybox.
+# Therefore this step is delayed until just before final link of busybox -
+# except in the kallsyms case where it is done just before adding the
+# symbols to the kernel.
+#
+# System.map is generated to document addresses of all kernel symbols
+
+busybox-all := $(core-y) $(libs-y)
+
+# Rule to link busybox - also used during CONFIG_KALLSYMS
+# May be overridden by arch/$(ARCH)/Makefile
+quiet_cmd_busybox__ ?= LINK $@
+ cmd_busybox__ ?= $(srctree)/scripts/trylink \
+ "$@" \
+ "$(CC)" \
+ "$(CFLAGS) $(CFLAGS_busybox)" \
+ "$(LDFLAGS) $(EXTRA_LDFLAGS)" \
+ "$(core-y)" \
+ "$(libs-y)" \
+ "$(LDLIBS)" \
+ && $(srctree)/scripts/generate_BUFSIZ.sh --post include/common_bufsiz.h
+
+# Generate System.map
+quiet_cmd_sysmap = SYSMAP
+ cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap
+
+# Link of busybox
+# If CONFIG_KALLSYMS is set .version is already updated
+# Generate System.map and verify that the content is consistent
+# Use + in front of the busybox_version rule to silent warning with make -j2
+# First command is ':' to allow us to use + in front of the rule
+define rule_busybox__
+ :
+ $(call cmd,busybox__)
+ $(Q)echo 'cmd_$@ := $(cmd_busybox__)' > $(@D)/.$(@F).cmd
+endef
+
+
+ifdef CONFIG_KALLSYMS
+# Generate section listing all symbols and add it into busybox $(kallsyms.o)
+# It's a three stage process:
+# o .tmp_busybox1 has all symbols and sections, but __kallsyms is
+# empty
+# Running kallsyms on that gives us .tmp_kallsyms1.o with
+# the right size - busybox version (uname -v) is updated during this step
+# o .tmp_busybox2 now has a __kallsyms section of the right size,
+# but due to the added section, some addresses have shifted.
+# From here, we generate a correct .tmp_kallsyms2.o
+# o The correct .tmp_kallsyms2.o is linked into the final busybox.
+# o Verify that the System.map from busybox matches the map from
+# .tmp_busybox2, just in case we did not generate kallsyms correctly.
+# o If CONFIG_KALLSYMS_EXTRA_PASS is set, do an extra pass using
+# .tmp_busybox3 and .tmp_kallsyms3.o. This is only meant as a
+# temporary bypass to allow the kernel to be built while the
+# maintainers work out what went wrong with kallsyms.
+
+ifdef CONFIG_KALLSYMS_EXTRA_PASS
+last_kallsyms := 3
+else
+last_kallsyms := 2
+endif
-scripts/config/conf: scripts/config/Makefile
- $(Q)$(MAKE) -C scripts/config conf
- -@if [ ! -f .config ] ; then \
- touch .config; \
- fi
+kallsyms.o := .tmp_kallsyms$(last_kallsyms).o
-scripts/config/mconf: scripts/config/Makefile
- $(Q)$(MAKE) -C scripts/config ncurses conf mconf
- -@if [ ! -f .config ] ; then \
- touch .config; \
- fi
+define verify_kallsyms
+ $(Q)$(if $($(quiet)cmd_sysmap), \
+ echo ' $($(quiet)cmd_sysmap) .tmp_System.map' &&) \
+ $(cmd_sysmap) .tmp_busybox$(last_kallsyms) .tmp_System.map
+ $(Q)cmp -s System.map .tmp_System.map || \
+ (echo Inconsistent kallsyms data; \
+ echo Try setting CONFIG_KALLSYMS_EXTRA_PASS; \
+ rm .tmp_kallsyms* ; /bin/false )
+endef
-menuconfig: scripts/config/mconf
- @[ -f .config ] || $(MAKE) $(MAKEFLAGS) defconfig
- @./scripts/config/mconf $(CONFIG_CONFIG_IN)
+# Update busybox version before link
+# Use + in front of this rule to silent warning about make -j1
+# First command is ':' to allow us to use + in front of this rule
+cmd_ksym_ld = $(cmd_busybox__)
+define rule_ksym_ld
+ :
+ +$(call cmd,busybox_version)
+ $(call cmd,busybox__)
+ $(Q)echo 'cmd_$@ := $(cmd_busybox__)' > $(@D)/.$(@F).cmd
+endef
-config: scripts/config/conf
- @./scripts/config/conf $(CONFIG_CONFIG_IN)
+# Generate .S file with all kernel symbols
+quiet_cmd_kallsyms = KSYM $@
+ cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \
+ $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@
-oldconfig: scripts/config/conf
- @./scripts/config/conf -o $(CONFIG_CONFIG_IN)
+.tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE
+ $(call if_changed_dep,as_o_S)
-randconfig: scripts/config/conf
- @./scripts/config/conf -r $(CONFIG_CONFIG_IN)
+.tmp_kallsyms%.S: .tmp_busybox% $(KALLSYMS)
+ $(call cmd,kallsyms)
-allyesconfig: scripts/config/conf
- @./scripts/config/conf -y $(CONFIG_CONFIG_IN) > /dev/null
- @$(SED) -i -r -e "s/^(USING_CROSS_COMPILER)=.*/# \1 is not set/" .config
- @./scripts/config/conf -o $(CONFIG_CONFIG_IN) > /dev/null
+# .tmp_busybox1 must be complete except kallsyms, so update busybox version
+.tmp_busybox1: $(busybox-lds) $(busybox-all) FORCE
+ $(call if_changed_rule,ksym_ld)
-allnoconfig: scripts/config/conf
- @./scripts/config/conf -n $(CONFIG_CONFIG_IN) > /dev/null
+.tmp_busybox2: $(busybox-lds) $(busybox-all) .tmp_kallsyms1.o FORCE
+ $(call if_changed,busybox__)
-# defconfig is allyesconfig minus any features that are specialized enough
-# or cause enough behavior change that the user really should switch them on
-# manually if that's what they want. Sort of "maximum sane config".
+.tmp_busybox3: $(busybox-lds) $(busybox-all) .tmp_kallsyms2.o FORCE
+ $(call if_changed,busybox__)
-defconfig: scripts/config/conf
- @./scripts/config/conf -y $(CONFIG_CONFIG_IN) > /dev/null
- @$(SED) -i -r -e "s/^(USING_CROSS_COMPILER|CONFIG_(DEBUG.*|STATIC|SELINUX|BUILD_(AT_ONCE|LIBBUSYBOX)|FEATURE_(DEVFS|FULL_LIBBUSYBOX|SHARED_BUSYBOX|MTAB_SUPPORT|CLEAN_UP|UDHCP_DEBUG)|INSTALL_NO_USR))=.*/# \1 is not set/" .config
- @./scripts/config/conf -o $(CONFIG_CONFIG_IN) > /dev/null
+# Needs to visit scripts/ before $(KALLSYMS) can be used.
+$(KALLSYMS): scripts ;
+# Generate some data for debugging strange kallsyms problems
+debug_kallsyms: .tmp_map$(last_kallsyms)
-allbareconfig: scripts/config/conf
- @./scripts/config/conf -y $(CONFIG_CONFIG_IN) > /dev/null
- @$(SED) -i -r -e "s/^(USING_CROSS_COMPILER|CONFIG_(DEBUG|STATIC|SELINUX|DEVFSD|NC_GAPING_SECURITY_HOLE|BUILD_AT_ONCE)).*/# \1 is not set/" .config
- @$(SED) -i -e "/FEATURE/s/=.*//;/^[^#]/s/.*FEATURE.*/# \0 is not set/;" .config
- @echo "CONFIG_FEATURE_BUFFERS_GO_ON_STACK=y" >> .config
- @yes n | ./scripts/config/conf -o $(CONFIG_CONFIG_IN) > /dev/null
+.tmp_map%: .tmp_busybox% FORCE
+ ($(OBJDUMP) -h $< | $(AWK) '/^ +[0-9]/{print $$4 " 0 " $$2}'; $(NM) $<) | sort > $@
-hosttools:
- $(Q)cp .config .config.bak || noold=yea
- $(Q)$(MAKE) CC="$(HOSTCC)" CFLAGS="$(HOSTCFLAGS) $(INCS)" allnoconfig
- $(Q)mv .config .config.in
- $(Q)(grep -v CONFIG_SED .config.in ; \
- echo "CONFIG_SED=y" ; ) > .config
- $(Q)$(MAKE) CC="$(HOSTCC)" CFLAGS="$(HOSTCFLAGS) $(INCS)" oldconfig include/bb_config.h
- $(Q)$(MAKE) CC="$(HOSTCC)" CFLAGS="$(HOSTCFLAGS) $(INCS)" busybox
- $(Q)[ -f .config.bak ] && mv .config.bak .config || rm .config
- mv busybox sed
- @echo "Now do: $(MAKE) SED=$(top_builddir)/sed <target>"
+.tmp_map3: .tmp_map2
-else # ifneq ($(strip $(HAVE_DOT_CONFIG)),y)
+.tmp_map2: .tmp_map1
-all: busybox busybox.links doc
+endif # ifdef CONFIG_KALLSYMS
-# In this section, we need .config
--include $(top_builddir)/.config.cmd
-include $(patsubst %,%/Makefile.in, $(SRC_DIRS))
-
-endif # ifneq ($(strip $(HAVE_DOT_CONFIG)),y)
-
--include $(top_builddir)/.config
--include $(top_builddir)/.depend
-
-
-ifeq ($(strip $(CONFIG_BUILD_AT_ONCE)),y)
-libraries-y:=
-# Which parts of the internal libs are requested?
-# Per default we only want what was actually selected.
-# -a denotes all while -y denotes the selected ones.
-ifeq ($(strip $(CONFIG_FEATURE_FULL_LIBBUSYBOX)),y)
-LIBRARY_DEFINE:=$(LIBRARY_DEFINE-a)
-LIBRARY_SRC :=$(LIBRARY_SRC-a)
-else # CONFIG_FEATURE_FULL_LIBBUSYBOX
-LIBRARY_DEFINE:=$(LIBRARY_DEFINE-y)
-LIBRARY_SRC :=$(LIBRARY_SRC-y)
-endif # CONFIG_FEATURE_FULL_LIBBUSYBOX
-APPLET_SRC:=$(APPLET_SRC-y)
-APPLETS_DEFINE:=$(APPLETS_DEFINE-y)
-else # CONFIG_BUILD_AT_ONCE
-# no --combine, build archives out of the individual .o
-# This was the old way the binary was built.
-libbusybox-obj:=archival/libunarchive/libunarchive.a \
- networking/libiproute/libiproute.a \
- libpwdgrp/libpwdgrp.a \
- coreutils/libcoreutils/libcoreutils.a \
- libbb/libbb.a
-libbusybox-obj:=$(patsubst %,$(top_builddir)/%,$(libbusybox-obj))
-
-ifeq ($(strip $(CONFIG_FEATURE_SHARED_BUSYBOX)),y)
-# linking against libbusybox, so don't build the .a already contained in the .so
-libraries-y:=$(filter-out $(libbusybox-obj),$(libraries-y))
-endif # CONFIG_FEATURE_SHARED_BUSYBOX
-endif # CONFIG_BUILD_AT_ONCE
-
-
-ifeq ($(strip $(CONFIG_BUILD_LIBBUSYBOX)),y)
-LD_LIBBUSYBOX:=libbusybox.so
-LIBBUSYBOX_SONAME:=$(LD_LIBBUSYBOX).$(MAJOR_VERSION).$(MINOR_VERSION).$(SUBLEVEL_VERSION)
-DO_INSTALL_LIBS:=$(LD_LIBBUSYBOX) \
- $(LD_LIBBUSYBOX).$(MAJOR_VERSION) \
- $(LD_LIBBUSYBOX).$(MAJOR_VERSION).$(MINOR_VERSION)
-endif # CONFIG_BUILD_LIBBUSYBOX
-
-ifeq ($(strip $(CONFIG_BUILD_AT_ONCE)),y)
-ifneq ($(strip $(CONFIG_FEATURE_SHARED_BUSYBOX)),y)
-# --combine but not linking against libbusybox, so compile all
-BUSYBOX_SRC := $(LIBRARY_SRC)
-BUSYBOX_DEFINE:= $(LIBRARY_DEFINE)
-endif # !CONFIG_FEATURE_SHARED_BUSYBOX
-$(LIBBUSYBOX_SONAME): $(LIBRARY_SRC)
-else # CONFIG_BUILD_AT_ONCE
-$(LIBBUSYBOX_SONAME): $(libbusybox-obj)
-endif # CONFIG_BUILD_AT_ONCE
-
-ifeq ($(strip $(CONFIG_FEATURE_SHARED_BUSYBOX)),y)
-LDBUSYBOX:=-L$(top_builddir) -lbusybox
+# busybox image - including updated kernel symbols
+busybox_unstripped: $(busybox-all) FORCE
+ $(call if_changed_rule,busybox__)
+ $(Q)rm -f .old_version
+
+busybox: busybox_unstripped
+ifeq ($(SKIP_STRIP),y)
+ $(Q)cp $< $@
+else
+ $(Q)$(STRIP) -s --remove-section=.note --remove-section=.comment \
+ busybox_unstripped -o $@
+# strip is confused by PIE executable and does not set exec bits
+ $(Q)chmod a+x $@
endif
-ifeq ($(strip $(CONFIG_BUILD_LIBBUSYBOX)),y)
-$(LIBBUSYBOX_SONAME):
-ifndef MAJOR_VERSION
- $(error MAJOR_VERSION needed for $@ is not defined)
+# The actual objects are generated when descending,
+# make sure no implicit rule kicks in
+$(sort $(busybox-all)): $(busybox-dirs) ;
+
+# Handle descending into subdirectories listed in $(busybox-dirs)
+# Preset locale variables to speed up the build process. Limit locale
+# tweaks to this spot to avoid wrong language settings when running
+# make menuconfig etc.
+# Error messages still appears in the original language
+
+PHONY += $(busybox-dirs)
+$(busybox-dirs): prepare scripts
+ $(Q)$(MAKE) $(build)=$@
+
+# Build the kernel release string
+# The KERNELRELEASE is stored in a file named .kernelrelease
+# to be used when executing for example make install or make modules_install
+#
+# Take the contents of any files called localversion* and the config
+# variable CONFIG_LOCALVERSION and append them to KERNELRELEASE.
+# LOCALVERSION from the command line override all of this
+
+nullstring :=
+space := $(nullstring) # end of line
+
+___localver = $(objtree)/localversion* $(srctree)/localversion*
+__localver = $(sort $(wildcard $(___localver)))
+# skip backup files (containing '~')
+_localver = $(foreach f, $(__localver), $(if $(findstring ~, $(f)),,$(f)))
+
+localver = $(subst $(space),, \
+ $(shell cat /dev/null $(_localver)) \
+ $(patsubst "%",%,$(CONFIG_LOCALVERSION)))
+
+# If CONFIG_LOCALVERSION_AUTO is set scripts/setlocalversion is called
+# and if the SCM is know a tag from the SCM is appended.
+# The appended tag is determinded by the SCM used.
+#
+# Currently, only git is supported.
+# Other SCMs can edit scripts/setlocalversion and add the appropriate
+# checks as needed.
+ifdef _BB_DISABLED_CONFIG_LOCALVERSION_AUTO
+ _localver-auto = $(shell $(CONFIG_SHELL) \
+ $(srctree)/scripts/setlocalversion $(srctree))
+ localver-auto = $(LOCALVERSION)$(_localver-auto)
endif
- $(do_link.so) \
- -Wl,-soname=$(LD_LIBBUSYBOX).$(MAJOR_VERSION) \
- -Wl,-z,combreloc
- @rm -f $(DO_INSTALL_LIBS)
- @for i in $(DO_INSTALL_LIBS); do ln -s $(@) $$i ; done
- $(do_strip)
-endif # ifeq ($(strip $(CONFIG_BUILD_LIBBUSYBOX)),y)
+localver-full = $(localver)$(localver-auto)
+
+# Store (new) KERNELRELASE string in .kernelrelease
+kernelrelease = $(KERNELVERSION)$(localver-full)
+.kernelrelease: FORCE
+ $(Q)rm -f $@
+ $(Q)echo $(kernelrelease) > $@
+
+
+# Things we need to do before we recursively start building the kernel
+# or the modules are listed in "prepare".
+# A multi level approach is used. prepareN is processed before prepareN-1.
+# archprepare is used in arch Makefiles and when processed asm symlink,
+# version.h and scripts_basic is processed / created.
+
+# Listed in dependency order
+PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
+
+# prepare-all is deprecated, use prepare as valid replacement
+PHONY += prepare-all
+
+# prepare3 is used to check if we are building in a separate output directory,
+# and if so do:
+# 1) Check that make has not been executed in the kernel src $(srctree)
+# 2) Create the include2 directory, used for the second asm symlink
+prepare3: .kernelrelease
+ifneq ($(KBUILD_SRC),)
+ @echo ' Using $(srctree) as source for busybox'
+ $(Q)if [ -f $(srctree)/.config ]; then \
+ echo " $(srctree) is not clean, please run 'make mrproper'";\
+ echo " in the '$(srctree)' directory.";\
+ /bin/false; \
+ fi;
+ $(Q)if [ ! -d include2 ]; then mkdir -p include2; fi;
+ $(Q)ln -fsn $(srctree)/include/asm-$(ARCH) include2/asm
+endif
-busybox_unstripped: .depend $(LIBBUSYBOX_SONAME) $(BUSYBOX_SRC) $(APPLET_SRC) $(libraries-y)
- $(do_link)
+# prepare2 creates a makefile if using a separate output directory
+prepare2: prepare3 outputmakefile
-busybox: busybox_unstripped
- $(Q)cp busybox_unstripped busybox
- $(do_strip)
+prepare1: prepare2 include/config/MARKER
+ifneq ($(KBUILD_MODULES),)
+ $(Q)mkdir -p $(MODVERDIR)
+ $(Q)rm -f $(MODVERDIR)/*
+endif
-%.bflt: %_unstripped
- $(do_elf2flt)
+archprepare: prepare1 scripts_basic applets_dir
+
+prepare0: archprepare FORCE
+ $(Q)$(MAKE) $(build)=.
+
+# All the preparing..
+prepare prepare-all: prepare0
+
+# Leave this as default for preprocessing busybox.lds.S, which is now
+# done in arch/$(ARCH)/kernel/Makefile
+
+export CPPFLAGS_busybox.lds += -P -C -U$(ARCH)
+
+# FIXME: The asm symlink changes when $(ARCH) changes. That's
+# hard to detect, but I suppose "make mrproper" is a good idea
+# before switching between archs anyway.
+
+#bbox# include/asm:
+#bbox# @echo ' SYMLINK $@ -> include/asm-$(ARCH)'
+#bbox# $(Q)if [ ! -d include ]; then mkdir -p include; fi;
+#bbox# @ln -fsn asm-$(ARCH) $@
+
+# Split autoconf.h into include/linux/config/*
+quiet_cmd_gen_bbconfigopts = GEN include/bbconfigopts.h
+ cmd_gen_bbconfigopts = $(srctree)/scripts/mkconfigs include/bbconfigopts.h include/bbconfigopts_bz2.h
+quiet_cmd_gen_common_bufsiz = GEN include/common_bufsiz.h
+ cmd_gen_common_bufsiz = $(srctree)/scripts/generate_BUFSIZ.sh include/common_bufsiz.h
+quiet_cmd_split_autoconf = SPLIT include/autoconf.h -> include/config/*
+ cmd_split_autoconf = scripts/basic/split-include include/autoconf.h include/config
+quiet_cmd_gen_embedded_scripts = GEN include/embedded_scripts.h
+ cmd_gen_embedded_scripts = $(srctree)/scripts/embedded_scripts include/embedded_scripts.h $(srctree)/embed $(srctree)/applets_sh
+#bbox# piggybacked generation of few .h files
+include/config/MARKER: scripts/basic/split-include include/autoconf.h $(wildcard $(srctree)/embed/*) $(srctree)/scripts/embedded_scripts
+ $(call cmd,split_autoconf)
+ $(call cmd,gen_bbconfigopts)
+ $(call cmd,gen_common_bufsiz)
+ $(call cmd,gen_embedded_scripts)
+ @touch $@
+
+# Generate some files
+# ---------------------------------------------------------------------------
-busybox.links: $(top_srcdir)/applets/busybox.mkll include/bb_config.h $(top_srcdir)/include/applets.h
- $(Q)-$(SHELL) $^ >$@
+# KERNELRELEASE can change from a few different places, meaning version.h
+# needs to be updated, so this check is forced on all builds
-install: $(top_srcdir)/applets/install.sh busybox busybox.links
- $(Q)DO_INSTALL_LIBS="$(strip $(LIBBUSYBOX_SONAME) $(DO_INSTALL_LIBS))" \
- $(SHELL) $< $(PREFIX) $(INSTALL_OPTS)
-ifeq ($(strip $(CONFIG_FEATURE_SUID)),y)
- @echo
+uts_len := 64
+
+define filechk_version.h
+ if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
+ echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \
+ exit 1; \
+ fi; \
+ (echo \#define UTS_RELEASE \"$(KERNELRELEASE)\"; \
+ echo \#define LINUX_VERSION_CODE `expr $(VERSION) \\* 65536 + $(PATCHLEVEL) \\* 256 + $(SUBLEVEL)`; \
+ echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))'; \
+ )
+endef
+
+# ---------------------------------------------------------------------------
+
+PHONY += depend dep
+depend dep:
+ @echo '*** Warning: make $@ is unnecessary now.'
+
+# ---------------------------------------------------------------------------
+# Modules
+
+ifdef _BB_DISABLED_CONFIG_MODULES
+
+# By default, build modules as well
+
+all: modules
+
+# Build modules
+
+PHONY += modules
+modules: $(busybox-dirs) $(if $(KBUILD_BUILTIN),busybox)
+ @echo ' Building modules, stage 2.';
+ $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
+
+
+# Target to prepare building external modules
+PHONY += modules_prepare
+modules_prepare: prepare scripts
+
+# Target to install modules
+PHONY += modules_install
+modules_install: _modinst_ _modinst_post
+
+PHONY += _modinst_
+_modinst_:
+ @if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \
+ echo "Warning: you may need to install module-init-tools"; \
+ echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\
+ sleep 1; \
+ fi
+ @rm -rf $(MODLIB)/kernel
+ @rm -f $(MODLIB)/source
+ @mkdir -p $(MODLIB)/kernel
+ @ln -s $(srctree) $(MODLIB)/source
+ @if [ ! $(objtree) -ef $(MODLIB)/build ]; then \
+ rm -f $(MODLIB)/build ; \
+ ln -s $(objtree) $(MODLIB)/build ; \
+ fi
+ $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modinst
+
+# If System.map exists, run depmod. This deliberately does not have a
+# dependency on System.map since that would run the dependency tree on
+# busybox. This depmod is only for convenience to give the initial
+# boot a modules.dep even before / is mounted read-write. However the
+# boot script depmod is the master version.
+ifeq "$(strip $(INSTALL_MOD_PATH))" ""
+depmod_opts :=
+else
+depmod_opts := -b $(INSTALL_MOD_PATH) -r
+endif
+PHONY += _modinst_post
+_modinst_post: _modinst_
+ if [ -r System.map -a -x $(DEPMOD) ]; then $(DEPMOD) -ae -F System.map $(depmod_opts) $(KERNELRELEASE); fi
+
+else # CONFIG_MODULES
+
+# Modules not configured
+# ---------------------------------------------------------------------------
+
+modules modules_install: FORCE
@echo
- @echo --------------------------------------------------
- @echo You will probably need to make your busybox binary
- @echo setuid root to ensure all configured applets will
- @echo work properly.
- @echo --------------------------------------------------
+ @echo "The present busybox configuration has modules disabled."
+ @echo "Type 'make config' and enable loadable module support."
+ @echo "Then build a kernel with module support enabled."
@echo
+ @exit 1
+
+endif # CONFIG_MODULES
+
+###
+# Cleaning is done on three levels.
+# make clean Delete most generated files
+# Leave enough to build external modules
+# make mrproper Delete the current configuration, and all generated files
+# make distclean Remove editor backup files, patch leftover files and the like
+
+# Directories & files removed with 'make clean'
+CLEAN_DIRS += $(MODVERDIR) _install 0_lib
+CLEAN_FILES += busybox busybox_unstripped* busybox.links \
+ System.map .kernelrelease \
+ .tmp_kallsyms* .tmp_version .tmp_busybox* .tmp_System.map
+
+# Directories & files removed with 'make mrproper'
+MRPROPER_DIRS += include/config include2
+MRPROPER_FILES += .config .config.old include/asm .version .old_version \
+ include/NUM_APPLETS.h \
+ include/common_bufsiz.h \
+ include/autoconf.h \
+ include/bbconfigopts.h \
+ include/bbconfigopts_bz2.h \
+ include/embedded_scripts.h \
+ include/usage_compressed.h \
+ include/applet_tables.h \
+ include/applets.h \
+ include/usage.h \
+ applets/usage \
+ .kernelrelease Module.symvers tags TAGS cscope* \
+ busybox_old
+
+# clean - Delete most, but leave enough to build external modules
+#
+clean: rm-dirs := $(CLEAN_DIRS)
+clean: rm-files := $(CLEAN_FILES)
+clean-dirs := $(addprefix _clean_,$(srctree) $(busybox-alldirs))
+
+PHONY += $(clean-dirs) clean archclean
+$(clean-dirs):
+ $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
+
+clean: archclean $(clean-dirs)
+ $(call cmd,rmdirs)
+ $(call cmd,rmfiles)
+ @find . $(RCS_FIND_IGNORE) \
+ \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
+ -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \
+ -type f -print | xargs rm -f
+
+PHONY += doc-clean
+doc-clean: rm-files := docs/busybox.pod \
+ docs/BusyBox.html docs/busybox.1 docs/BusyBox.txt
+doc-clean:
+ $(call cmd,rmfiles)
+
+# mrproper - Delete all generated files, including .config
+#
+mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
+mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
+mrproper-dirs := $(addprefix _mrproper_,scripts)
+
+PHONY += $(mrproper-dirs) mrproper archmrproper
+$(mrproper-dirs):
+ $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
+
+mrproper: clean archmrproper $(mrproper-dirs)
+ $(call cmd,rmdirs)
+ $(call cmd,rmfiles)
+ @find . -name Config.src | sed 's/.src$$/.in/' | xargs -r rm -f
+ @find . -name Kbuild.src | sed 's/.src$$//' | xargs -r rm -f
+
+# distclean
+#
+PHONY += distclean
+
+distclean: mrproper
+ @find $(srctree) $(RCS_FIND_IGNORE) \
+ \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
+ -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
+ -o -name '.*.rej' -o -name '*.tmp' -o -size 0 \
+ -o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \
+ -type f -print | xargs rm -f
+
+
+# Packaging of the kernel to various formats
+# ---------------------------------------------------------------------------
+# rpm target kept for backward compatibility
+package-dir := $(srctree)/scripts/package
+
+%pkg: FORCE
+ $(Q)$(MAKE) $(build)=$(package-dir) $@
+rpm: FORCE
+ $(Q)$(MAKE) $(build)=$(package-dir) $@
+
+
+# Brief documentation of the typical targets used
+# ---------------------------------------------------------------------------
+
+boards := $(wildcard $(srctree)/configs/*_defconfig)
+boards := $(notdir $(boards))
+
+-include $(srctree)/Makefile.help
+
+# Documentation targets
+# ---------------------------------------------------------------------------
+%docs: scripts_basic FORCE
+ $(Q)$(MAKE) $(build)=Documentation/DocBook $@
+
+else # KBUILD_EXTMOD
+
+###
+# External module support.
+# When building external modules the kernel used as basis is considered
+# read-only, and no consistency checks are made and the make
+# system is not used on the basis kernel. If updates are required
+# in the basis kernel ordinary make commands (without M=...) must
+# be used.
+#
+# The following are the only valid targets when building external
+# modules.
+# make M=dir clean Delete all automatically generated files
+# make M=dir modules Make all modules in specified dir
+# make M=dir Same as 'make M=dir modules'
+# make M=dir modules_install
+# Install the modules build in the module directory
+# Assumes install directory is already created
+
+# We are always building modules
+KBUILD_MODULES := 1
+PHONY += crmodverdir
+crmodverdir:
+ $(Q)mkdir -p $(MODVERDIR)
+ $(Q)rm -f $(MODVERDIR)/*
+
+PHONY += $(objtree)/Module.symvers
+$(objtree)/Module.symvers:
+ @test -e $(objtree)/Module.symvers || ( \
+ echo; \
+ echo " WARNING: Symbol version dump $(objtree)/Module.symvers"; \
+ echo " is missing; modules will have no dependencies and modversions."; \
+ echo )
+
+module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD))
+PHONY += $(module-dirs) modules
+$(module-dirs): crmodverdir $(objtree)/Module.symvers
+ $(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)
+
+modules: $(module-dirs)
+ @echo ' Building modules, stage 2.';
+ $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
+
+PHONY += modules_install
+modules_install: _emodinst_ _emodinst_post
+
+install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra)
+PHONY += _emodinst_
+_emodinst_:
+ $(Q)mkdir -p $(MODLIB)/$(install-dir)
+ $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modinst
+
+# Run depmod only is we have System.map and depmod is executable
+quiet_cmd_depmod = DEPMOD $(KERNELRELEASE)
+ cmd_depmod = if [ -r System.map -a -x $(DEPMOD) ]; then \
+ $(DEPMOD) -ae -F System.map \
+ $(if $(strip $(INSTALL_MOD_PATH)), \
+ -b $(INSTALL_MOD_PATH) -r) \
+ $(KERNELRELEASE); \
+ fi
+
+PHONY += _emodinst_post
+_emodinst_post: _emodinst_
+ $(call cmd,depmod)
+
+clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD))
+
+PHONY += $(clean-dirs) clean
+$(clean-dirs):
+ $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
+
+clean: rm-dirs := $(MODVERDIR)
+clean: $(clean-dirs)
+ $(call cmd,rmdirs)
+ @find $(KBUILD_EXTMOD) $(RCS_FIND_IGNORE) \
+ \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
+ -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \
+ -type f -print | xargs rm -f
+
+# Dummies...
+PHONY += prepare scripts
+prepare: ;
+scripts: ;
+endif # KBUILD_EXTMOD
+
+# Generate tags for editors
+# ---------------------------------------------------------------------------
+
+#We want __srctree to totally vanish out when KBUILD_OUTPUT is not set
+#(which is the most common case IMHO) to avoid unneeded clutter in the big tags file.
+#Adding $(srctree) adds about 20M on i386 to the size of the output file!
+
+ifeq ($(src),$(obj))
+__srctree =
+else
+__srctree = $(srctree)/
endif
-uninstall: busybox.links
- rm -f $(PREFIX)/bin/busybox
- for i in `cat busybox.links` ; do rm -f $(PREFIX)$$i; done
-ifneq ($(strip $(DO_INSTALL_LIBS)),n)
- for i in $(LIBBUSYBOX_SONAME) $(DO_INSTALL_LIBS); do \
- rm -f $(PREFIX)$$i; \
- done
+ifeq ($(ALLSOURCE_ARCHS),)
+ifeq ($(ARCH),um)
+ALLINCLUDE_ARCHS := $(ARCH) $(SUBARCH)
+else
+ALLINCLUDE_ARCHS := $(ARCH)
+endif
+else
+#Allow user to specify only ALLSOURCE_PATHS on the command line, keeping existing behaviour.
+ALLINCLUDE_ARCHS := $(ALLSOURCE_ARCHS)
endif
-check test: busybox
- bindir=$(top_builddir) srcdir=$(top_srcdir)/testsuite SED="$(SED)" \
- $(SHELL) $(top_srcdir)/testsuite/runtest $(CHECK_VERBOSE)
+ALLSOURCE_ARCHS := $(ARCH)
-checkhelp:
- $(Q)$(top_srcdir)/scripts/checkhelp.awk \
- $(wildcard $(patsubst %,%/Config.in,$(SRC_DIRS) ./))
+define all-sources
+ ( find -regex '.*\.[ch]$$' )
+endef
-sizes: busybox_unstripped
- $(NM) --size-sort $(<)
+quiet_cmd_cscope-file = FILELST cscope.files
+ cmd_cscope-file = (echo \-k; echo \-q; $(all-sources)) > cscope.files
-bloatcheck: busybox_old busybox_unstripped
- @$(top_srcdir)/scripts/bloat-o-meter busybox_old busybox_unstripped
+quiet_cmd_cscope = MAKE cscope.out
+ cmd_cscope = cscope -b
-baseline: busybox_unstripped
- @mv busybox_unstripped busybox_old
+cscope: FORCE
+ $(call cmd,cscope-file)
+ $(call cmd,cscope)
-objsizes: busybox_unstripped
- $(SHELL) $(top_srcdir)/scripts/objsizes
+quiet_cmd_TAGS = MAKE $@
+define cmd_TAGS
+ rm -f $@; \
+ ETAGSF=`etags --version | grep -i exuberant >/dev/null && \
+ echo "-I __initdata,__exitdata,__acquires,__releases \
+ -I EXPORT_SYMBOL,EXPORT_SYMBOL_GPL \
+ --extra=+f --c-kinds=+px"`; \
+ $(all-sources) | xargs etags $$ETAGSF -a
+endef
-# Documentation Targets
-doc: docs/busybox.pod docs/BusyBox.txt docs/BusyBox.1 docs/BusyBox.html
+TAGS: FORCE
+ $(call cmd,TAGS)
-docs/busybox.pod : $(top_srcdir)/docs/busybox_header.pod $(top_srcdir)/include/usage.h $(top_srcdir)/docs/busybox_footer.pod $(top_srcdir)/docs/autodocifier.pl
- $(disp_doc)
- $(Q)-mkdir -p docs
- $(Q)-( cat $(top_srcdir)/docs/busybox_header.pod ; \
- $(top_srcdir)/docs/autodocifier.pl $(top_srcdir)/include/usage.h ; \
- cat $(top_srcdir)/docs/busybox_footer.pod ; ) > docs/busybox.pod
-docs/BusyBox.txt: docs/busybox.pod
- $(disp_doc)
- $(Q)-mkdir -p docs
- $(Q)-pod2text $< > $@
+quiet_cmd_tags = MAKE $@
+define cmd_tags
+ rm -f $@; \
+ CTAGSF=`ctags --version | grep -i exuberant >/dev/null && \
+ echo "-I __initdata,__exitdata,__acquires,__releases \
+ -I EXPORT_SYMBOL,EXPORT_SYMBOL_GPL \
+ --extra=+f --c-kinds=+px"`; \
+ $(all-sources) | xargs ctags $$CTAGSF -a
+endef
-docs/BusyBox.1: docs/busybox.pod
- $(disp_doc)
- $(Q)-mkdir -p docs
- $(Q)-pod2man --center=BusyBox --release="version $(VERSION)" \
- $< > $@
+tags: FORCE
+ $(call cmd,tags)
-docs/BusyBox.html: docs/busybox.net/BusyBox.html
- $(disp_doc)
- $(Q)-mkdir -p docs
- $(Q)-rm -f docs/BusyBox.html
- $(Q)-cp docs/busybox.net/BusyBox.html docs/BusyBox.html
-docs/busybox.net/BusyBox.html: docs/busybox.pod
- $(Q)-mkdir -p docs/busybox.net
- $(Q)-pod2html --noindex $< > \
- docs/busybox.net/BusyBox.html
- $(Q)-rm -f pod2htm*
+# Scripts to check various things for consistency
+# ---------------------------------------------------------------------------
-# The nifty new dependency stuff
-scripts/bb_mkdep: $(top_srcdir)/scripts/bb_mkdep.c
- $(do_link.h)
+includecheck:
+ find * $(RCS_FIND_IGNORE) \
+ -name '*.[hcS]' -type f -print | sort \
+ | xargs $(PERL) -w scripts/checkincludes.pl
-DEP_INCLUDES := include/bb_config.h
+versioncheck:
+ find * $(RCS_FIND_IGNORE) \
+ -name '*.[hcS]' -type f -print | sort \
+ | xargs $(PERL) -w scripts/checkversion.pl
-ifeq ($(strip $(CONFIG_BBCONFIG)),y)
-DEP_INCLUDES += include/bbconfigopts.h
+namespacecheck:
+ $(PERL) $(srctree)/scripts/namespace.pl
-include/bbconfigopts.h: .config $(top_srcdir)/scripts/config/mkconfigs
- $(disp_gen)
- $(Q)$(top_srcdir)/scripts/config/mkconfigs > $@
-endif
+endif #ifeq ($(config-targets),1)
+endif #ifeq ($(mixed-targets),1)
-ifeq ($(strip $(CONFIG_FEATURE_COMPRESS_USAGE)),y)
-USAGE_BIN:=scripts/usage
-$(USAGE_BIN): $(top_srcdir)/scripts/usage.c .config
- $(do_link.h)
+PHONY += checkstack
+checkstack:
+ $(OBJDUMP) -d busybox $$(find . -name '*.ko') | \
+ $(PERL) $(src)/scripts/checkstack.pl $(ARCH)
-DEP_INCLUDES += include/usage_compressed.h
+kernelrelease:
+ $(if $(wildcard .kernelrelease), $(Q)echo $(KERNELRELEASE), \
+ $(error kernelrelease not valid - run 'make *config' to update it))
+kernelversion:
+ @echo $(KERNELVERSION)
-include/usage_compressed.h: .config $(USAGE_BIN) $(top_srcdir)/scripts/usage_compressed
- $(Q)SED="$(SED)" $(SHELL) $(top_srcdir)/scripts/usage_compressed "$(top_builddir)/scripts" > $@
-endif # CONFIG_FEATURE_COMPRESS_USAGE
+# Single targets
+# ---------------------------------------------------------------------------
+# Single targets are compatible with:
+# - build whith mixed source and output
+# - build with separate output dir 'make O=...'
+# - external modules
+#
+# target-dir => where to store outputfile
+# build-dir => directory in kernel source tree to use
-# workaround alleged bug in make-3.80, make-3.81
-.NOTPARALLEL: .depend
+ifeq ($(KBUILD_EXTMOD),)
+ build-dir = $(patsubst %/,%,$(dir $@))
+ target-dir = $(dir $@)
+else
+ zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
+ build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
+ target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
+endif
-depend dep: .depend
-.depend: scripts/bb_mkdep $(USAGE_BIN) $(DEP_INCLUDES)
- $(disp_gen)
- $(Q)rm -f .depend
- $(Q)mkdir -p include/config
- $(Q)scripts/bb_mkdep -I $(top_srcdir)/include $(top_srcdir) > $@.tmp
- $(Q)mv $@.tmp $@
+%.s: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.i: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.o: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.lst: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.s: %.S prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.o: %.S prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+
+# Modules
+%/: prepare scripts FORCE
+ $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
+ $(build)=$(build-dir)
+/: prepare scripts FORCE
+ $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
+ $(build)=$(build-dir)
+
+%.ko: prepare scripts FORCE
+ $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
+ $(build)=$(build-dir) $(@:.ko=.o)
+ $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
+
+# FIXME Should go into a make.lib or something
+# ===========================================================================
+
+quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
+ cmd_rmdirs = rm -rf $(rm-dirs)
+
+quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
+ cmd_rmfiles = rm -f $(rm-files)
+
+
+a_flags = -Wp,-MD,$(depfile) $(AFLAGS) $(AFLAGS_KERNEL) \
+ $(NOSTDINC_FLAGS) $(CPPFLAGS) \
+ $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(*F).o)
+
+quiet_cmd_as_o_S = AS $@
+cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
+
+# read all saved command lines
+
+targets := $(wildcard $(sort $(targets)))
+cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
+
+ifneq ($(cmd_files),)
+ $(cmd_files): ; # Do not try to update included dependency files
+ include $(cmd_files)
+endif
-include/bb_config.h: .config
- @if [ ! -x $(top_builddir)/scripts/config/conf ] ; then \
- $(MAKE) -C scripts/config conf; \
- fi;
- @$(top_builddir)/scripts/config/conf -o $(CONFIG_CONFIG_IN)
-
-clean:
- - $(MAKE) -C scripts/config $@
- - rm -f docs/busybox.dvi docs/busybox.ps \
- docs/busybox.pod docs/busybox.net/busybox.html \
- docs/busybox pod2htm* *.gdb *.elf *~ core .*config.log \
- docs/BusyBox.txt docs/BusyBox.1 docs/BusyBox.html \
- docs/busybox.net/BusyBox.html busybox.links \
- libbusybox.so* \
- .config.old busybox busybox_unstripped
- - rm -r -f _install testsuite/links
- - find . -name .\*.flags -o -name \*.o -o -name \*.om -o -name \*.syn \
- -o -name \*.os -o -name \*.osm -o -name \*.a | xargs rm -f
-
-distclean: clean
- rm -f scripts/bb_mkdep scripts/usage
- rm -r -f include/config include/config.h $(DEP_INCLUDES)
- find . -name .depend'*' -print0 | xargs -0 rm -f
- rm -f .hdepend
- rm -f .config .config.old .config.cmd
-
-release: distclean #doc
- cd ..; \
- rm -r -f $(PROG)-$(VERSION); \
- cp -a busybox $(PROG)-$(VERSION); \
- \
- find $(PROG)-$(VERSION)/ -type d \
- -name .svn \
- -print \
- -exec rm -r -f {} \; ; \
- \
- find $(PROG)-$(VERSION)/ -type f \
- -name .\#* \
- -print \
- -exec rm -f {} \; ; \
- \
- tar -cvzf $(PROG)-$(VERSION).tar.gz $(PROG)-$(VERSION)/;
-
-tags:
- ctags -R .
-
-# documentation, cross-reference
-# Modern distributions already ship synopsis packages (e.g. debian)
-# If you have an old distribution go to http://synopsis.fresco.org/
-syn_tgt := $(wildcard $(patsubst %,%/*.c,$(SRC_DIRS)))
-syn := $(patsubst %.c, %.syn, $(syn_tgt))
-
-%.syn: %.c
- synopsis -p C -l Comments.SSDFilter,Comments.Previous $(INCS) -Wp,verbose,debug,preprocess,cppflags="'$(CFLAGS) $(EXTRA_CFLAGS) $(LDFLAGS) $(PROG_CFLAGS) $(PROG_LDFLAGS) $(CFLAGS_COMBINE) $(APPLETS_DEFINE) $(BUSYBOX_DEFINE)'" -o $@ $<
-html: $(syn)
- synopsis -f HTML -Wf,title="'BusyBox Documentation'" -o $@ $^
-
-
-endif # ifeq ($(skip-makefile),)
+# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
+# Usage:
+# $(Q)$(MAKE) $(clean)=dir
+clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
+
+endif # skip-makefile
+
+PHONY += FORCE
+FORCE:
+
+-include $(srctree)/Makefile.custom
+# Declare the contents of the .PHONY variable as phony. We keep that
+# information in a variable se we can use it in if_changed and friends.
+.PHONY: $(PHONY)