# If you have a "pristine" source directory, point BB_SRC_DIR to it.
# Experimental and incomplete; tell the mailing list
# <busybox@opensource.lineo.com> if you do or don't like it so far.
-BB_SRC_DIR = .
+BB_SRC_DIR =
# If you are running a cross compiler, you may want to set this
# to something more interesting, like "powerpc-linux-".
CROSS =
CC = $(CROSS)gcc
+AR = $(CROSS)ar
STRIPTOOL = $(CROSS)strip
# To compile vs uClibc, just use the compiler wrapper built by uClibc...
-# Isn't that easy? Right now, uClibc needs BB_FEATURE_NFSMOUNT disabled
-# since uClibc's nfs support isn't ready yet.
+# This make things very easy? Everything should compile and work as
+# expected these days...
#CC = ../uClibc/extra/gcc-uClibc/gcc-uClibc-i386
# To compile vs some other alternative libc, you may need to use/adjust
# the following lines to meet your needs...
-#LIBCDIR=/usr/i486-linuxlibc1/
+#
+# If you are using Red Hat 6.x with the compatible RPMs (for developing under
+# Red Hat 5.x and glibc 2.0) uncomment the following. Be sure to read about
+# using the compatible RPMs (compat-*) at http://www.redhat.com !
+#LIBCDIR=/usr/i386-glibc20-linux
+#
+# The following is used for libc5 (if you install altgcc and libc5-altdev
+# on a Debian system).
+#LIBCDIR=/usr/i486-linuxlibc1
+#
+# For other libraries, you are on your own...
#LDFLAGS+=-nostdlib
-#LIBRARIES = $(LIBCDIR)/libc.a -lgcc
+#LIBRARIES = $(LIBCDIR)/lib/libc.a -lgcc
#CROSS_CFLAGS+=-nostdinc -I$(LIBCDIR)/include -I$(GCCINCDIR)
#GCCINCDIR = $(shell gcc -print-search-dirs | sed -ne "s/install: \(.*\)/\1include/gp")
-#--------------------------------------------------------
-
# use '-Os' optimization if available, else use -O2
-OPTIMIZATION = $(shell if $(CC) -Os -S -o /dev/null -xc /dev/null >/dev/null 2>&1; \
+OPTIMIZATION := $(shell if $(CC) -Os -S -o /dev/null -xc /dev/null >/dev/null 2>&1; \
then echo "-Os"; else echo "-O2" ; fi)
WARNINGS = -Wall
+#
+#--------------------------------------------------------
+# If you're going to do a lot of builds with a non-vanilla configuration,
+# it makes sense to adjust parameters above, so you can type "make"
+# by itself, instead of following it by the same half-dozen overrides
+# every time. The stuff below, on the other hand, is probably less
+# prone to casual user adjustment.
+#
+
ifeq ($(strip $(DOLFS)),true)
# For large file summit support
CFLAGS+=-D_FILE_OFFSET_BITS=64
endif
# Additional complications due to support for pristine source dir.
-# Config.h in the build directory should take precedence over the
-# copy in BB_SRC_DIR, both during the compilation phase and the
+# Include files in the build directory should take precedence over
+# the copy in BB_SRC_DIR, both during the compilation phase and the
# shell script that finds the list of object files.
-#
# Work in progress by <ldoolitt@recycle.lbl.gov>.
-# If it gets in your way, set DISABLE_VPATH=yes
-ifeq ($(strip $(DISABLE_VPATH)),yes)
- CONFIG_H = Config.h
-else
- VPATH = .:$(BB_SRC_DIR)
- CONFIG_LIST = $(addsuffix /Config.h,$(subst :, ,$(VPATH)))
- CONFIG_H = $(word 1,$(shell ls -f -1 $(CONFIG_LIST) 2>/dev/null))
- CFLAGS += -I- $(patsubst %,-I%,$(subst :, ,$(VPATH)))
+#
+ifneq ($(strip $(BB_SRC_DIR)),)
+ VPATH = $(BB_SRC_DIR)
endif
-
-OBJECTS = $(shell $(BB_SRC_DIR)/busybox.sh $(CONFIG_H) $(BB_SRC_DIR)) busybox.o messages.o usage.o utility.o
+#ifneq ($(strip $(VPATH)),)
+# CFLAGS += -I- -I. $(patsubst %,-I%,$(subst :, ,$(VPATH)))
+#endif
+
+# We need to set APPLET_SOURCES to something like
+# $(shell busybox.sh Config.h)
+# but in a manner that works with VPATH and BB_SRC_DIR.
+# Possible ways to approach this:
+#
+# 1. Explicitly search through .:$(VPATH) for busybox.sh and config.h,
+# then $(shell $(BUSYBOX_SH) $(CONFIG_H) $(BB_SRC_DIR))
+#
+# 2. Explicity search through .:$(VPATH) for slist.mk,
+# then $(shell $(MAKE) -f $(SLIST_MK) VPATH=$(VPATH) BB_SRC_DIR=$(BB_SRC_DIR))
+#
+# 3. Create slist.mk in this directory, with commands embedded in
+# a $(shell ...) command, and $(MAKE) it immediately.
+#
+# 4. Use a real rule within this makefile to create a file that sets
+# APPLET_SOURCE_LIST, then include that file. Has complications
+# with the first trip through the makefile (before processing the
+# include) trying to do too much, and a spurious warning the first
+# time make is run.
+#
+# This is option 3:
+#
+#APPLET_SOURCES = $(shell \
+# echo -e 'all: busybox.sh Config.h\n\t@ $$(SHELL) $$^ $$(BB_SRC_DIR)' >slist.mk; \
+# make -f slist.mk VPATH=$(VPATH) BB_SRC_DIR=$(BB_SRC_DIR) \
+#)
+# And option 4:
+-include applet_source_list
+
+OBJECTS = $(APPLET_SOURCES:.c=.o) busybox.o messages.o usage.o utility.o
CFLAGS += $(CROSS_CFLAGS)
CFLAGS += -DBB_VER='"$(VERSION)"'
CFLAGS += -DBB_BT='"$(BUILDTIME)"'
endif
ifneq ($(strip $(USE_SYSTEM_PWD_GRP)),true)
- PWD_LIB = pwd_grp/libpwd.a
- LIBRARIES += $(PWD_LIB)
+ PWD_GRP = pwd_grp
+ PWD_GRP_DIR = $(BB_SRC_DIR)$(PWD_GRP)
+ PWD_LIB = libpwd.a
+ PWD_CSRC=__getpwent.c pwent.c getpwnam.c getpwuid.c putpwent.c getpw.c \
+ fgetpwent.c __getgrent.c grent.c getgrnam.c getgrgid.c fgetgrent.c \
+ initgroups.c setgroups.c
+ PWD_OBJS=$(patsubst %.c,$(PWD_GRP)/%.o, $(PWD_CSRC))
+ PWD_CFLAGS = -I$(PWD_GRP_DIR)
else
CFLAGS += -DUSE_SYSTEM_PWD_GRP
endif
-
# Put user-supplied flags at the end, where they
# have a chance of winning.
CFLAGS += $(CFLAGS_EXTRA)
.EXPORT_ALL_VARIABLES:
-all: busybox busybox.links doc
+all: applet_source_list busybox busybox.links doc
+
+applet_source_list: busybox.sh Config.h
+ (echo -n "APPLET_SOURCES := "; $(SHELL) $^ $(BB_SRC_DIR)) > $@
doc: olddoc
@echo BusyBox Documentation
@echo
-mkdir -p docs
- -pod2text $(BB_SRC_DIR)/docs/busybox.pod > docs/BusyBox.txt
+ -pod2text $< > $@
docs/BusyBox.1: docs/busybox.pod
- mkdir -p docs
- pod2man --center=BusyBox --release="version $(VERSION)" \
- $(BB_SRC_DIR)/docs/busybox.pod > docs/BusyBox.1
+ $< > $@
docs/BusyBox.html: docs/busybox.lineo.com/BusyBox.html
+ - mkdir -p docs
-@ rm -f docs/BusyBox.html
-@ ln -s busybox.lineo.com/BusyBox.html docs/BusyBox.html
docs/busybox.lineo.com/BusyBox.html: docs/busybox.pod
-@ mkdir -p docs/busybox.lineo.com
- - pod2html --noindex $(BB_SRC_DIR)/docs/busybox.pod > \
+ - pod2html --noindex $< > \
docs/busybox.lineo.com/BusyBox.html
-@ rm -f pod2html*
(cd docs/busybox.lineo.com; sgmltools -b html ../busybox.sgml)
-
busybox: $(PWD_LIB) $(OBJECTS)
- $(CC) $(LDFLAGS) -o $@ $^ $(LIBRARIES)
+ $(CC) $(LDFLAGS) -o $@ $(OBJECTS) $(LIBRARIES) $(PWD_LIB)
$(STRIP)
-$(PWD_LIB):
- $(MAKE) -eC pwd_grp
-
-busybox.links: Config.h applets.h
- - $(BB_SRC_DIR)/busybox.mkll $(CONFIG_H) $(BB_SRC_DIR)/applets.h >$@
+# Without VPATH, rule expands to "/bin/sh busybox.mkll Config.h applets.h"
+# but with VPATH, some or all of those file names are resolved to the
+# directories in which they live.
+busybox.links: busybox.mkll Config.h applets.h
+ - $(SHELL) $^ >$@
nfsmount.o cmdedit.o: %.o: %.h
$(OBJECTS): %.o: %.c Config.h busybox.h applets.h Makefile
+ $(CC) -I- $(CFLAGS) -I. $(patsubst %,-I%,$(subst :, ,$(BB_SRC_DIR))) -c $< -o $*.o
+
+$(PWD_OBJS): %.o: %.c Config.h busybox.h applets.h Makefile
+ - mkdir -p $(PWD_GRP)
+ $(CC) $(CFLAGS) $(PWD_CFLAGS) -c $< -o $*.o
+
+libpwd.a: $(PWD_OBJS)
+ $(AR) $(ARFLAGS) $@ $^
usage.o: usage.h
utility.o: loop.h
loop.h: mk_loop_h.sh
- @ sh $<
+ @ $(SHELL) $< > $@
test tests:
cd tests && $(MAKE) all
clean:
- cd tests && $(MAKE) clean
- - cd pwd_grp && $(MAKE) clean
- rm -f docs/BusyBox.txt docs/BusyBox.1 docs/BusyBox.html \
docs/busybox.lineo.com/BusyBox.html
- rm -f docs/busybox.txt docs/busybox.dvi docs/busybox.ps \
docs/busybox.pdf docs/busybox.lineo.com/busybox.html
- rm -f multibuild.log Config.h.orig
- - rm -rf docs/busybox _install
- - rm -f busybox.links loop.h *~ *.o core
+ - rm -rf docs/busybox _install libpwd.a
+ - rm -f busybox.links loop.h *~ slist.mk core applet_source_list
+ - find -name \*.o -exec rm -f {} \;
distclean: clean
- rm -f busybox
- cd tests && $(MAKE) distclean
-install: busybox busybox.links
- $(BB_SRC_DIR)/install.sh $(PREFIX)
+install: install.sh busybox busybox.links
+ $(SHELL) $< $(PREFIX)
-install-hardlinks: busybox busybox.links
- $(BB_SRC_DIR)/install.sh $(PREFIX) --hardlinks
+install-hardlinks: install.sh busybox busybox.links
+ $(SHELL) $< $(PREFIX) --hardlinks
debug_pristine:
@ echo VPATH=\"$(VPATH)\"
- @ echo CONFIG_LIST=\"$(CONFIG_LIST)\"
- @ echo CONFIG_H=\"$(CONFIG_H)\"
@ echo OBJECTS=\"$(OBJECTS)\"
dist release: distclean doc
find busybox-$(VERSION)/ -type d \
-name CVS \
-print \
- | xargs rm -rf; \
+ -exec rm -rf {} \; \
\
find busybox-$(VERSION)/ -type f \
-name .cvsignore \
-print \
- | xargs rm -f; \
+ -exec rm -f {} \; \
\
find busybox-$(VERSION)/ -type f \
-name .\#* \
-print \
- | xargs rm -f; \
+ -exec rm -f {} \; \
\
tar -cvzf busybox-$(VERSION).tar.gz busybox-$(VERSION)/;