#!/bin/bash
-
# Tool mainly for U-Boot Quality Assurance: build one or more board
# configurations with minimal verbosity, showing only warnings and
# errors.
#
-# There are several ways to select which boards to build.
-#
-# Traditionally, architecture names (like "powerpc"), CPU family names
-# (like "mpc83xx") or board names can be specified on the command
-# line; without any arguments, MAKEALL defaults to building all Power
-# Architecture systems (i. e. same as for "MAKEALL powerpc").
-#
-# With the introduction of the board.cfg file, it has become possible
-# to provide additional selections. We use standard command line
-# options for this:
-#
-# -a or --arch : Select architecture
-# -c or --cpu : Select CPU family
-# -s or --soc : Select SoC type
-# -v or --vendor: Select board vendor
-#
-# Selections by these options are logically ANDed; if the same option
-# is used repeatedly, such selections are ORed. So "-v FOO -v BAR"
-# will select all configurations where the vendor is either FOO or
-# BAR. Any additional arguments specified on the command line are
-# always build additionally.
-#
-# Examples:
-#
-# - build all Power Architecture boards:
-#
-# MAKEALL -a powerpc
-# or
-# MAKEALL --arch powerpc
-# or
-# MAKEALL powerpc
-#
-# - build all PowerPC boards manufactured by vendor "esd":
-#
-# MAKEALL -a powerpc -v esd
-#
-# - build all PowerPC boards manufactured either by "keymile" or
-# "siemens":
-#
-# MAKEALL -a powerpc -v keymile -v siemens
-#
-# - build all Freescale boards with MPC83xx CPUs, plus all 4xx boards:
-#
-# MAKEALL -c mpc83xx -v freescale 4xx
-#
-#########################################################################
+# SPDX-License-Identifier: GPL-2.0+
-SHORT_OPTS="a:c:v:s:"
-LONG_OPTS="arch:,cpu:,vendor:,soc:"
+usage()
+{
+ # if exiting with 0, write to stdout, else write to stderr
+ local ret=${1:-0}
+ [ "${ret}" -eq 1 ] && exec 1>&2
+ cat <<-EOF
+ Usage: MAKEALL [options] [--] [boards-to-build]
+
+ Options:
+ -a ARCH, --arch ARCH Build all boards with arch ARCH
+ -c CPU, --cpu CPU Build all boards with cpu CPU
+ -v VENDOR, --vendor VENDOR Build all boards with vendor VENDOR
+ -s SOC, --soc SOC Build all boards with soc SOC
+ -b BOARD, --board BOARD Build all boards with board name BOARD
+ -l, --list List all targets to be built
+ -m, --maintainers List all targets and maintainer email
+ -M, --mails List all targets and all affilated emails
+ -C, --check Enable build checking
+ -n, --continue Continue (skip boards already built)
+ -r, --rebuild-errors Rebuild any boards that errored
+ -h, --help This help output
+
+ Selections by these options are logically ANDed; if the same option
+ is used repeatedly, such selections are ORed. So "-v FOO -v BAR"
+ will select all configurations where the vendor is either FOO or
+ BAR. Any additional arguments specified on the command line are
+ always build additionally. See the boards.cfg file for more info.
+
+ If no boards are specified, then the default is "powerpc".
+
+ Environment variables:
+ BUILD_NCPUS number of parallel make jobs (default: auto)
+ CROSS_COMPILE cross-compiler toolchain prefix (default: "")
+ CROSS_COMPILE_<ARCH> cross-compiler toolchain prefix for
+ architecture "ARCH". Substitute "ARCH" for any
+ supported architecture (default: "")
+ MAKEALL_LOGDIR output all logs to here (default: ./LOG/)
+ BUILD_DIR output build directory (default: ./)
+ BUILD_NBUILDS number of parallel targets (default: 1)
+
+ Examples:
+ - build all Power Architecture boards:
+ MAKEALL -a powerpc
+ MAKEALL --arch powerpc
+ MAKEALL powerpc
+ - build all PowerPC boards manufactured by vendor "esd":
+ MAKEALL -a powerpc -v esd
+ - build all PowerPC boards manufactured either by "keymile" or "siemens":
+ MAKEALL -a powerpc -v keymile -v siemens
+ - build all Freescale boards with MPC83xx CPUs, plus all 4xx boards:
+ MAKEALL -c mpc83xx -v freescale 4xx
+ EOF
+ exit ${ret}
+}
+
+SHORT_OPTS="ha:c:v:s:b:lmMCnr"
+LONG_OPTS="help,arch:,cpu:,vendor:,soc:,board:,list,maintainers,mails,check,continue,rebuild-errors"
# Option processing based on util-linux-2.13/getopt-parse.bash
TEMP=`getopt -o ${SHORT_OPTS} --long ${LONG_OPTS} \
-n 'MAKEALL' -- "$@"`
-if [ $? != 0 ] ; then echo "Terminating..." >&2 ; exit 1 ; fi
+[ $? != 0 ] && usage 1
# Note the quotes around `$TEMP': they are essential!
eval set -- "$TEMP"
SELECTED=''
+ONLY_LIST=''
+PRINT_MAINTS=''
+MAINTAINERS_ONLY=''
+CONTINUE=''
+REBUILD_ERRORS=''
while true ; do
case "$1" in
-c|--cpu)
# echo "Option CPU: argument \`$2'"
if [ "$opt_c" ] ; then
- opt_c="${opt_c%)} || \$3 == \"$2\")"
+ opt_c="${opt_c%)} || \$3 == \"$2\" || \$3 ~ /$2:/)"
else
- opt_c="(\$3 == \"$2\")"
+ opt_c="(\$3 == \"$2\" || \$3 ~ /$2:/)"
fi
SELECTED='y'
shift 2 ;;
-s|--soc)
# echo "Option SoC: argument \`$2'"
if [ "$opt_s" ] ; then
- opt_s="${opt_s%)} || \$6 == \"$2\")"
+ opt_s="${opt_s%)} || \$4 == \"$2\" || \$4 ~ /$2/)"
else
- opt_s="(\$6 == \"$2\")"
+ opt_s="(\$4 == \"$2\" || \$4 ~ /$2/)"
fi
SELECTED='y'
shift 2 ;;
fi
SELECTED='y'
shift 2 ;;
+ -b|--board)
+ # echo "Option BOARD: argument \`$2'"
+ if [ "$opt_b" ] ; then
+ opt_b="${opt_b%)} || \$6 == \"$2\" || \$7 == \"$2\")"
+ else
+ # We need to check the 7th field too
+ # for boards whose 6th field is "-"
+ opt_b="(\$6 == \"$2\" || \$7 == \"$2\")"
+ fi
+ SELECTED='y'
+ shift 2 ;;
+ -C|--check)
+ CHECK='C=1'
+ shift ;;
+ -n|--continue)
+ CONTINUE='y'
+ shift ;;
+ -r|--rebuild-errors)
+ REBUILD_ERRORS='y'
+ shift ;;
+ -l|--list)
+ ONLY_LIST='y'
+ shift ;;
+ -m|--maintainers)
+ ONLY_LIST='y'
+ PRINT_MAINTS='y'
+ MAINTAINERS_ONLY='y'
+ shift ;;
+ -M|--mails)
+ ONLY_LIST='y'
+ PRINT_MAINTS='y'
+ shift ;;
+ -h|--help)
+ usage ;;
--)
shift ; break ;;
*)
[ "$opt_c" ] && FILTER="${FILTER} && $opt_c"
[ "$opt_s" ] && FILTER="${FILTER} && $opt_s"
[ "$opt_v" ] && FILTER="${FILTER} && $opt_v"
+[ "$opt_b" ] && FILTER="${FILTER} && $opt_b"
if [ "$SELECTED" ] ; then
- SELECTED=$(awk '('"$FILTER"') { print $1 }' boards.cfg)
+ SELECTED=$(awk '('"$FILTER"') { print $7 }' boards.cfg)
# Make sure some boards from boards.cfg are actually found
if [ -z "$SELECTED" ] ; then
JOBS=""
fi
-
-if [ "${CROSS_COMPILE}" ] ; then
- MAKE="make CROSS_COMPILE=${CROSS_COMPILE}"
-else
- MAKE=make
-fi
-
if [ "${MAKEALL_LOGDIR}" ] ; then
LOG_DIR=${MAKEALL_LOGDIR}
else
LOG_DIR="LOG"
fi
-if [ ! "${BUILD_DIR}" ] ; then
- BUILD_DIR="."
+: ${BUILD_NBUILDS:=1}
+BUILD_MANY=0
+
+if [ "${BUILD_NBUILDS}" -gt 1 ] ; then
+ BUILD_MANY=1
+ : ${BUILD_DIR:=./build}
+ mkdir -p "${BUILD_DIR}/ERR"
+ find "${BUILD_DIR}/ERR/" -type f -exec rm -f {} +
fi
-[ -d ${LOG_DIR} ] || mkdir ${LOG_DIR} || exit 1
+: ${BUILD_DIR:=.}
+
+OUTPUT_PREFIX="${BUILD_DIR}"
+
+[ -d ${LOG_DIR} ] || mkdir "${LOG_DIR}" || exit 1
+if [ "$CONTINUE" != 'y' -a "$REBUILD_ERRORS" != 'y' ] ; then
+ find "${LOG_DIR}/" -type f -exec rm -f {} +
+fi
LIST=""
# Keep track of the number of builds and errors
ERR_CNT=0
ERR_LIST=""
+WRN_CNT=0
+WRN_LIST=""
TOTAL_CNT=0
+SKIP_CNT=0
+CURRENT_CNT=0
+OLDEST_IDX=1
RC=0
# Helper funcs for parsing boards.cfg
-boards_by_field()
+targets_by_field()
{
- awk \
- -v field="$1" \
- -v select="$2" \
- '($1 !~ /^#/ && $field == select) { print $1 }' \
- boards.cfg
+ field=$1
+ regexp=$2
+
+ awk '($1 !~ /^#/ && $'"$field"' ~ /^'"$regexp"'$/) { print $7 }' \
+ boards.cfg
}
-boards_by_arch() { boards_by_field 2 "$@" ; }
-boards_by_cpu() { boards_by_field 3 "$@" ; }
-boards_by_soc() { boards_by_field 6 "$@" ; }
+
+targets_by_arch() { targets_by_field 2 "$@" ; }
+targets_by_cpu() { targets_by_field 3 "$@" ; targets_by_field 3 "$@:.*" ; }
+targets_by_soc() { targets_by_field 4 "$@" ; }
#########################################################################
## MPC5xx Systems
#########################################################################
-LIST_5xx="$(boards_by_cpu mpc5xx)"
+LIST_5xx="$(targets_by_cpu mpc5xx)"
#########################################################################
## MPC5xxx Systems
#########################################################################
-LIST_5xxx="$(boards_by_cpu mpc5xxx)"
+LIST_5xxx="$(targets_by_cpu mpc5xxx)"
#########################################################################
## MPC512x Systems
#########################################################################
-LIST_512x="$(boards_by_cpu mpc512x)"
+LIST_512x="$(targets_by_cpu mpc512x)"
#########################################################################
## MPC8xx Systems
#########################################################################
-LIST_8xx="$(boards_by_cpu mpc8xx)"
+LIST_8xx="$(targets_by_cpu mpc8xx)"
#########################################################################
## PPC4xx Systems
#########################################################################
-LIST_4xx="$(boards_by_cpu ppc4xx)"
-
-#########################################################################
-## MPC8220 Systems
-#########################################################################
-
-LIST_8220="$(boards_by_cpu mpc8220)"
+LIST_4xx="$(targets_by_cpu ppc4xx)"
#########################################################################
## MPC824x Systems
#########################################################################
-LIST_824x="$(boards_by_cpu mpc824x)"
+LIST_824x="$(targets_by_cpu mpc824x)"
#########################################################################
## MPC8260 Systems (includes 8250, 8255 etc.)
#########################################################################
-LIST_8260="$(boards_by_cpu mpc8260)"
+LIST_8260="$(targets_by_cpu mpc8260)"
#########################################################################
## MPC83xx Systems (includes 8349, etc.)
#########################################################################
-LIST_83xx="$(boards_by_cpu mpc83xx)"
+LIST_83xx="$(targets_by_cpu mpc83xx)"
#########################################################################
## MPC85xx Systems (includes 8540, 8560 etc.)
#########################################################################
-LIST_85xx="$(boards_by_cpu mpc85xx)"
+LIST_85xx="$(targets_by_cpu mpc85xx)"
#########################################################################
## MPC86xx Systems
#########################################################################
-LIST_86xx="$(boards_by_cpu mpc86xx)"
+LIST_86xx="$(targets_by_cpu mpc86xx)"
#########################################################################
## 74xx/7xx Systems
#########################################################################
-LIST_74xx_7xx="$(boards_by_cpu 74xx_7xx)"
+LIST_74xx_7xx="$(targets_by_cpu 74xx_7xx)"
#########################################################################
## PowerPC groups
${LIST_512x} \
${LIST_5xxx} \
${LIST_8xx} \
- ${LIST_8220} \
${LIST_824x} \
${LIST_8260} \
${LIST_83xx} \
## StrongARM Systems
#########################################################################
-LIST_SA="$(boards_by_cpu sa1100)"
+LIST_SA="$(targets_by_cpu sa1100)"
#########################################################################
## ARM7 Systems
#########################################################################
-LIST_ARM7=" \
- ap7 \
- ap720t \
- armadillo \
- B2 \
- ep7312 \
- evb4510 \
- impa7 \
- integratorap \
- lpc2292sodimm \
- modnet50 \
- SMN42 \
-"
+LIST_ARM7="$(targets_by_cpu arm720t)"
#########################################################################
## ARM9 Systems
#########################################################################
-LIST_ARM9=" \
- a320evb \
- ap920t \
- ap922_XA10 \
- ap926ejs \
- ap946es \
- ap966 \
- aspenite \
- cp920t \
- cp922_XA10 \
- cp926ejs \
- cp946es \
- cp966 \
- da830evm \
- da850evm \
- edb9301 \
- edb9302 \
- edb9302a \
- edb9307 \
- edb9307a \
- edb9312 \
- edb9315 \
- edb9315a \
- edminiv2 \
- guruplug \
- imx27lite \
- jadecpu \
- lpd7a400 \
- magnesium \
- mv88f6281gtw_ge \
- mx1ads \
- mx1fs2 \
- netstar \
- nhk8815 \
- nhk8815_onenand \
- omap1510inn \
- omap1610h2 \
- omap1610inn \
- omap5912osk \
- omap730p2 \
- openrd_base \
- rd6281a \
- sbc2410x \
- scb9328 \
- sheevaplug \
- smdk2400 \
- smdk2410 \
- spear300 \
- spear310 \
- spear320 \
- spear600 \
- suen3 \
- trab \
- VCMA9 \
- versatile \
- versatileab \
- versatilepb \
- voiceblue \
- davinci_dvevm \
- davinci_schmoogie \
- davinci_sffsdr \
- davinci_sonata \
- davinci_dm355evm \
- davinci_dm355leopard \
- davinci_dm365evm \
- davinci_dm6467evm \
+LIST_ARM9="$(targets_by_cpu arm920t) \
+ $(targets_by_cpu arm926ejs) \
+ $(targets_by_cpu arm946es) \
"
#########################################################################
-## ARM10 Systems
+## ARM11 Systems
#########################################################################
-LIST_ARM10=" \
- integratorcp \
- cp1026 \
+LIST_ARM11="$(targets_by_cpu arm1136) \
+ $(targets_by_cpu arm1176) \
"
#########################################################################
-## ARM11 Systems
+## ARMV7 Systems
#########################################################################
-LIST_ARM11=" \
- cp1136 \
- omap2420h4 \
- apollon \
- imx31_litekit \
- imx31_phycore \
- imx31_phycore_eet \
- mx31ads \
- mx31pdk \
- mx31pdk_nand \
- qong \
- smdk6400 \
- tnetv107x_evm \
-"
+
+LIST_ARMV7="$(targets_by_cpu armv7)"
#########################################################################
-## ARMV7 Systems
+## ARMV8 Systems
#########################################################################
-LIST_ARMV7=" \
- am3517_evm \
- ca9x4_ct_vxp \
- devkit8000 \
- igep0020 \
- igep0030 \
- mx51evk \
- omap3_beagle \
- omap3_overo \
- omap3_evm \
- omap3_pandora \
- omap3_sdp3430 \
- omap3_zoom1 \
- omap3_zoom2 \
- omap4_panda \
- omap4_sdp4430 \
- s5p_goni \
- smdkc100 \
-"
+
+LIST_ARMV8="$(targets_by_cpu armv8)"
#########################################################################
## AT91 Systems
#########################################################################
-LIST_at91="$(boards_by_soc at91)\
- $(boards_by_soc at91rm9200)\
- at91sam9260ek \
- at91sam9261ek \
- at91sam9263ek \
- at91sam9g10ek \
- at91sam9g20ek \
- at91sam9m10g45ek \
- at91sam9rlek \
- CPUAT91 \
- CPU9260 \
- CPU9G20 \
- pm9g45 \
- SBC35_A9G20 \
- TNY_A9260 \
- TNY_A9G20 \
-"
+LIST_at91="$(targets_by_soc at91)"
#########################################################################
## Xscale Systems
#########################################################################
-LIST_pxa="$(boards_by_cpu pxa)"
+LIST_pxa="$(targets_by_cpu pxa)"
-LIST_ixp="$(boards_by_cpu ixp)
- pdnb3 \
- scpu \
-"
+#########################################################################
+## SPEAr Systems
+#########################################################################
+
+LIST_spear="$(targets_by_soc spear)"
#########################################################################
## ARM groups
#########################################################################
-LIST_arm=" \
- ${LIST_SA} \
- ${LIST_ARM7} \
- ${LIST_ARM9} \
- ${LIST_ARM10} \
- ${LIST_ARM11} \
- ${LIST_ARMV7} \
- ${LIST_at91} \
- ${LIST_pxa} \
- ${LIST_ixp} \
+LIST_arm="$(targets_by_arch arm | \
+ for ARMV8_TARGET in $LIST_ARMV8; \
+ do sed "/$ARMV8_TARGET/d"; \
+ done) \
"
#########################################################################
LIST_mips4kc=" \
incaip \
+ incaip_100MHz \
+ incaip_133MHz \
+ incaip_150MHz \
qemu_mips \
vct_platinum \
vct_platinum_small \
vct_premium_onenand_small \
"
-LIST_mips5kc=" \
- purple \
-"
-
LIST_au1xx0=" \
dbau1000 \
dbau1100 \
dbau1500 \
dbau1550 \
- dbau1550_el \
- gth2 \
"
LIST_mips=" \
## MIPS Systems (little endian)
#########################################################################
-LIST_mips4kc_el=""
-
-LIST_mips5kc_el=""
-
LIST_au1xx0_el=" \
dbau1550_el \
pb1000 \
"
-
LIST_mips_el=" \
- ${LIST_mips4kc_el} \
- ${LIST_mips5kc_el} \
${LIST_au1xx0_el} \
"
+#########################################################################
+## OpenRISC Systems
+#########################################################################
+
+LIST_openrisc="$(targets_by_arch openrisc)"
#########################################################################
-## i386 Systems
+## x86 Systems
#########################################################################
-LIST_x86="$(boards_by_arch i386)"
+LIST_x86="$(targets_by_arch x86)"
#########################################################################
## Nios-II Systems
#########################################################################
-LIST_nios2="$(boards_by_arch nios2)
- nios2-generic \
-"
+LIST_nios2="$(targets_by_arch nios2)"
#########################################################################
## MicroBlaze Systems
#########################################################################
-LIST_microblaze="$(boards_by_arch microblaze)"
+LIST_microblaze="$(targets_by_arch microblaze)"
#########################################################################
## ColdFire Systems
#########################################################################
-LIST_coldfire="$(boards_by_arch m68k)
- astro_mcf5373l \
- cobra5272 \
- EB+MCF-EV123 \
- EB+MCF-EV123_internal \
- M52277EVB \
- M5235EVB \
- M5329AFEE \
- M5373EVB \
- M54451EVB \
- M54455EVB \
- M5475AFE \
- M5485AFE \
-"
+LIST_m68k="$(targets_by_arch m68k)"
+LIST_coldfire=${LIST_m68k}
#########################################################################
## AVR32 Systems
#########################################################################
-LIST_avr32="$(boards_by_arch avr32)"
+LIST_avr32="$(targets_by_arch avr32)"
#########################################################################
## Blackfin Systems
#########################################################################
-LIST_blackfin="$(boards_by_arch blackfin)"
+LIST_blackfin="$(targets_by_arch blackfin)"
#########################################################################
## SH Systems
#########################################################################
-LIST_sh2="$(boards_by_cpu sh2)"
-LIST_sh3="$(boards_by_cpu sh3)"
-LIST_sh4="$(boards_by_cpu sh4)"
+LIST_sh2="$(targets_by_cpu sh2)"
+LIST_sh3="$(targets_by_cpu sh3)"
+LIST_sh4="$(targets_by_cpu sh4)"
-LIST_sh="$(boards_by_arch sh)"
+LIST_sh="$(targets_by_arch sh)"
#########################################################################
## SPARC Systems
#########################################################################
-LIST_sparc="$(boards_by_arch sparc)"
+LIST_sparc="$(targets_by_arch sparc)"
+
+#########################################################################
+## NDS32 Systems
+#########################################################################
+
+LIST_nds32="$(targets_by_arch nds32)"
+
+#########################################################################
+## ARC Systems
+#########################################################################
+
+LIST_arc="$(targets_by_arch arc)"
#-----------------------------------------------------------------------
+get_target_location() {
+ local target=$1
+ local BOARD_NAME=""
+ local CONFIG_NAME=""
+ local board=""
+ local vendor=""
+
+ # Automatic mode
+ local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
+ if [ -z "${line}" ] ; then echo "" ; return ; fi
+
+ set ${line}
+
+ CONFIG_NAME="${7%_config}"
+
+ [ "${BOARD_NAME}" ] || BOARD_NAME="${7%_config}"
+
+ if [ $# -gt 5 ]; then
+ if [ "$6" = "-" ] ; then
+ board=${BOARD_NAME}
+ else
+ board="$6"
+ fi
+ fi
+
+ [ $# -gt 4 ] && [ "$5" != "-" ] && vendor="$5"
+ [ $# -gt 6 ] && [ "$8" != "-" ] && {
+ tmp="${8%:*}"
+ if [ "$tmp" ] ; then
+ CONFIG_NAME="$tmp"
+ fi
+ }
+
+ # Assign board directory to BOARDIR variable
+ if [ "${vendor}" == "-" ] ; then
+ BOARDDIR=${board}
+ else
+ BOARDDIR=${vendor}/${board}
+ fi
+
+ echo "${CONFIG_NAME}:${BOARDDIR}:${BOARD_NAME}"
+}
+
+get_target_maintainers() {
+ local name=`echo $1 | cut -d : -f 3`
+
+ local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
+ if [ -z "${line}" ]; then
+ echo ""
+ return ;
+ fi
+
+ local mails=`echo ${line} | cut -d ' ' -f 9- | sed -e 's/[^<]*<//' -e 's/>.*</ /' -e 's/>[^>]*$//'`
+ [ "$mails" == "-" ] && mails=""
+ echo "$mails"
+}
+
+get_target_arch() {
+ local target=$1
+
+ # Automatic mode
+ local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
+
+ if [ -z "${line}" ] ; then echo "" ; return ; fi
+
+ set ${line}
+ echo "$2"
+}
+
+list_target() {
+ if [ "$PRINT_MAINTS" != 'y' ] ; then
+ echo "$1"
+ return
+ fi
+
+ echo -n "$1:"
+
+ local loc=`get_target_location $1`
+
+ if [ -z "${loc}" ] ; then echo "ERROR" ; return ; fi
+
+ local maintainers_result=`get_target_maintainers ${loc} | tr " " "\n"`
+
+ if [ "$MAINTAINERS_ONLY" != 'y' ] ; then
+
+ local dir=`echo ${loc} | cut -d ":" -f 2`
+ local cfg=`echo ${loc} | cut -d ":" -f 1`
+ local git_result=`git log --format=%aE board/${dir} \
+ include/configs/${cfg}.h | grep "@"`
+ local git_result_recent=`echo ${git_result} | tr " " "\n" | \
+ head -n 3`
+ local git_result_top=`echo ${git_result} | tr " " "\n" | \
+ sort | uniq -c | sort -nr | head -n 3 | \
+ sed "s/^ \+[0-9]\+ \+//"`
+
+ echo -e "$git_result_recent\n$git_result_top\n$maintainers_result" | \
+ sort -u | tr "\n" " " | sed "s/ $//" ;
+ else
+ echo -e "$maintainers_result" | sort -u | tr "\n" " " | \
+ sed "s/ $//" ;
+ fi
+
+ echo ""
+}
+
+# Each finished build will have a file called ${donep}${n},
+# where n is the index of the build. Each build
+# we've already noted as finished will have ${skipp}${n}.
+# The code managing the build process will use this information
+# to ensure that only BUILD_NBUILDS builds are in flight at once
+donep="${LOG_DIR}/._done_"
+skipp="${LOG_DIR}/._skip_"
+
+build_target_killed() {
+ echo "Aborted $target build."
+ # Remove the logs for this board since it was aborted
+ rm -f ${LOG_DIR}/$target.MAKELOG ${LOG_DIR}/$target.ERR
+ exit
+}
+
build_target() {
target=$1
+ build_idx=$2
+
+ if [ "$ONLY_LIST" == 'y' ] ; then
+ list_target ${target}
+ return
+ fi
+
+ if [ $BUILD_MANY == 1 ] ; then
+ output_dir="${OUTPUT_PREFIX}/${target}"
+ mkdir -p "${output_dir}"
+ trap build_target_killed TERM
+ else
+ output_dir="${OUTPUT_PREFIX}"
+ fi
+
+ target_arch=$(get_target_arch ${target})
+ eval cross_toolchain=\$CROSS_COMPILE_`echo $target_arch | tr '[:lower:]' '[:upper:]'`
+ if [ "${cross_toolchain}" ] ; then
+ MAKE="make CROSS_COMPILE=${cross_toolchain}"
+ elif [ "${CROSS_COMPILE}" ] ; then
+ MAKE="make CROSS_COMPILE=${CROSS_COMPILE}"
+ else
+ MAKE=make
+ fi
+
+ if [ "${output_dir}" != "." ] ; then
+ MAKE="${MAKE} O=${output_dir}"
+ fi
${MAKE} distclean >/dev/null
${MAKE} -s ${target}_config
- ${MAKE} ${JOBS} all 2>&1 >${LOG_DIR}/$target.MAKELOG \
- | tee ${LOG_DIR}/$target.ERR
+ ${MAKE} ${JOBS} ${CHECK} all \
+ >${LOG_DIR}/$target.MAKELOG 2> ${LOG_DIR}/$target.ERR
# Check for 'make' errors
if [ ${PIPESTATUS[0]} -ne 0 ] ; then
RC=1
fi
- if [ -s ${LOG_DIR}/$target.ERR ] ; then
- ERR_CNT=$((ERR_CNT + 1))
- ERR_LIST="${ERR_LIST} $target"
+ if [ $BUILD_MANY == 1 ] ; then
+ trap - TERM
+
+ ${MAKE} -s clean
+
+ if [ -s ${LOG_DIR}/${target}.ERR ] ; then
+ cp ${LOG_DIR}/${target}.ERR ${OUTPUT_PREFIX}/ERR/${target}
+ else
+ rm ${LOG_DIR}/${target}.ERR
+ fi
else
- rm ${LOG_DIR}/$target.ERR
+ if [ -s ${LOG_DIR}/${target}.ERR ] ; then
+ if grep -iw error ${LOG_DIR}/${target}.ERR ; then
+ : $(( ERR_CNT += 1 ))
+ ERR_LIST="${ERR_LIST} $target"
+ else
+ : $(( WRN_CNT += 1 ))
+ WRN_LIST="${WRN_LIST} $target"
+ fi
+ else
+ rm ${LOG_DIR}/${target}.ERR
+ fi
fi
- TOTAL_CNT=$((TOTAL_CNT + 1))
+ OBJS=${output_dir}/u-boot
+ if [ -e ${output_dir}/spl/u-boot-spl ]; then
+ OBJS="${OBJS} ${output_dir}/spl/u-boot-spl"
+ fi
+
+ ${CROSS_COMPILE}size ${OBJS} | tee -a ${LOG_DIR}/$target.MAKELOG
+
+ [ -e "${LOG_DIR}/${target}.ERR" ] && cat "${LOG_DIR}/${target}.ERR"
- ${CROSS_COMPILE}size ${BUILD_DIR}/u-boot \
- | tee -a ${LOG_DIR}/$target.MAKELOG
+ touch "${donep}${build_idx}"
+}
+
+manage_builds() {
+ search_idx=${OLDEST_IDX}
+ if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
+
+ while true; do
+ if [ -e "${donep}${search_idx}" ] ; then
+ : $(( CURRENT_CNT-- ))
+ [ ${OLDEST_IDX} -eq ${search_idx} ] &&
+ : $(( OLDEST_IDX++ ))
+
+ # Only want to count it once
+ rm -f "${donep}${search_idx}"
+ touch "${skipp}${search_idx}"
+ elif [ -e "${skipp}${search_idx}" ] ; then
+ [ ${OLDEST_IDX} -eq ${search_idx} ] &&
+ : $(( OLDEST_IDX++ ))
+ fi
+ : $(( search_idx++ ))
+ if [ ${search_idx} -gt ${TOTAL_CNT} ] ; then
+ if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
+ search_idx=${OLDEST_IDX}
+ sleep 1
+ else
+ break
+ fi
+ fi
+ done
}
+
build_targets() {
for t in "$@" ; do
# If a LIST_xxx var exists, use it. But avoid variable
if [ -n "${list}" ] ; then
build_targets ${list}
else
- build_target ${t}
+ : $((TOTAL_CNT += 1))
+ : $((CURRENT_CNT += 1))
+ rm -f "${donep}${TOTAL_CNT}"
+ rm -f "${skipp}${TOTAL_CNT}"
+ if [ "$CONTINUE" = 'y' -a -e ${LOG_DIR}/$t.MAKELOG ] ; then
+ : $((SKIP_CNT += 1))
+ touch "${donep}${TOTAL_CNT}"
+ elif [ "$REBUILD_ERRORS" = 'y' -a ! -e ${LOG_DIR}/$t.ERR ] ; then
+ : $((SKIP_CNT += 1))
+ touch "${donep}${TOTAL_CNT}"
+ else
+ if [ $BUILD_MANY == 1 ] ; then
+ build_target ${t} ${TOTAL_CNT} &
+ else
+ CUR_TGT="${t}"
+ build_target ${t} ${TOTAL_CNT}
+ CUR_TGT=''
+ fi
+ fi
+ fi
+
+ # We maintain a running count of all the builds we have done.
+ # Each finished build will have a file called ${donep}${n},
+ # where n is the index of the build. Each build
+ # we've already noted as finished will have ${skipp}${n}.
+ # We track the current index via TOTAL_CNT, and the oldest
+ # index. When we exceed the maximum number of parallel builds,
+ # We look from oldest to current for builds that have completed,
+ # and update the current count and oldest index as appropriate.
+ # If we've gone through the entire list, wait a second, and
+ # reprocess the entire list until we find a build that has
+ # completed
+ if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
+ manage_builds
fi
done
}
#-----------------------------------------------------------------------
+kill_children() {
+ local OS=$(uname -s)
+ local children=""
+ case "${OS}" in
+ "Darwin")
+ # Mac OS X is known to have BSD style ps
+ local pgid=$(ps -p $$ -o pgid | sed -e "/PGID/d")
+ children=$(ps -g $pgid -o pid | sed -e "/PID\|$$\|$pgid/d")
+ ;;
+ *)
+ # everything else tries the GNU style
+ local pgid=$(ps -p $$ --no-headers -o "%r" | tr -d ' ')
+ children=$(pgrep -g $pgid | sed -e "/$$\|$pgid/d")
+ ;;
+ esac
+
+ kill $children 2> /dev/null
+ wait $children 2> /dev/null
+
+ exit
+}
+
print_stats() {
+ if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
+
+ # Only count boards that completed
+ : $((TOTAL_CNT = `find ${skipp}* 2> /dev/null | wc -l`))
+
+ rm -f ${donep}* ${skipp}*
+
+ if [ $BUILD_MANY == 1 ] && [ -e "${OUTPUT_PREFIX}/ERR" ] ; then
+ ERR_LIST=`grep -riwl error ${OUTPUT_PREFIX}/ERR/`
+ ERR_LIST=`for f in $ERR_LIST ; do echo -n " $(basename $f)" ; done`
+ ERR_CNT=`echo $ERR_LIST | wc -w | awk '{print $1}'`
+ WRN_LIST=`grep -riwL error ${OUTPUT_PREFIX}/ERR/`
+ WRN_LIST=`for f in $WRN_LIST ; do echo -n " $(basename $f)" ; done`
+ WRN_CNT=`echo $WRN_LIST | wc -w | awk '{print $1}'`
+ else
+ # Remove the logs for any board that was interrupted
+ rm -f ${LOG_DIR}/${CUR_TGT}.MAKELOG ${LOG_DIR}/${CUR_TGT}.ERR
+ fi
+
+ : $((TOTAL_CNT -= ${SKIP_CNT}))
echo ""
echo "--------------------- SUMMARY ----------------------------"
+ if [ "$CONTINUE" = 'y' -o "$REBUILD_ERRORS" = 'y' ] ; then
+ echo "Boards skipped: ${SKIP_CNT}"
+ fi
echo "Boards compiled: ${TOTAL_CNT}"
if [ ${ERR_CNT} -gt 0 ] ; then
- echo "Boards with warnings or errors: ${ERR_CNT} (${ERR_LIST} )"
+ echo "Boards with errors: ${ERR_CNT} (${ERR_LIST} )"
+ fi
+ if [ ${WRN_CNT} -gt 0 ] ; then
+ echo "Boards with warnings but no errors: ${WRN_CNT} (${WRN_LIST} )"
fi
echo "----------------------------------------------------------"
+ if [ $BUILD_MANY == 1 ] ; then
+ kill_children
+ fi
+
exit $RC
}
# run PowerPC by default
[ $# = 0 ] && set -- powerpc
build_targets "$@"
+wait