#!/bin/bash
+# Tool mainly for U-Boot Quality Assurance: build one or more board
+# configurations with minimal verbosity, showing only warnings and
+# errors.
+#
+# SPDX-License-Identifier: GPL-2.0+
+
+usage()
+{
+ # if exiting with 0, write to stdout, else write to stderr
+ local ret=${1:-0}
+ [ "${ret}" -eq 1 ] && exec 1>&2
+ cat <<-EOF
+ Usage: MAKEALL [options] [--] [boards-to-build]
+
+ Options:
+ -a ARCH, --arch ARCH Build all boards with arch ARCH
+ -c CPU, --cpu CPU Build all boards with cpu CPU
+ -v VENDOR, --vendor VENDOR Build all boards with vendor VENDOR
+ -s SOC, --soc SOC Build all boards with soc SOC
+ -b BOARD, --board BOARD Build all boards with board name BOARD
+ -l, --list List all targets to be built
+ -m, --maintainers List all targets and maintainer email
+ -M, --mails List all targets and all affilated emails
+ -C, --check Enable build checking
+ -n, --continue Continue (skip boards already built)
+ -r, --rebuild-errors Rebuild any boards that errored
+ -h, --help This help output
+
+ Selections by these options are logically ANDed; if the same option
+ is used repeatedly, such selections are ORed. So "-v FOO -v BAR"
+ will select all configurations where the vendor is either FOO or
+ BAR. Any additional arguments specified on the command line are
+ always build additionally. See the boards.cfg file for more info.
+
+ If no boards are specified, then the default is "powerpc".
+
+ Environment variables:
+ BUILD_NCPUS number of parallel make jobs (default: auto)
+ CROSS_COMPILE cross-compiler toolchain prefix (default: "")
+ CROSS_COMPILE_<ARCH> cross-compiler toolchain prefix for
+ architecture "ARCH". Substitute "ARCH" for any
+ supported architecture (default: "")
+ MAKEALL_LOGDIR output all logs to here (default: ./LOG/)
+ BUILD_DIR output build directory (default: ./)
+ BUILD_NBUILDS number of parallel targets (default: 1)
+
+ Examples:
+ - build all Power Architecture boards:
+ MAKEALL -a powerpc
+ MAKEALL --arch powerpc
+ MAKEALL powerpc
+ - build all PowerPC boards manufactured by vendor "esd":
+ MAKEALL -a powerpc -v esd
+ - build all PowerPC boards manufactured either by "keymile" or "siemens":
+ MAKEALL -a powerpc -v keymile -v siemens
+ - build all Freescale boards with MPC83xx CPUs, plus all 4xx boards:
+ MAKEALL -c mpc83xx -v freescale 4xx
+ EOF
+ exit ${ret}
+}
+
+SHORT_OPTS="ha:c:v:s:b:lmMCnr"
+LONG_OPTS="help,arch:,cpu:,vendor:,soc:,board:,list,maintainers,mails,check,continue,rebuild-errors"
+
+# Option processing based on util-linux-2.13/getopt-parse.bash
+
+# Note that we use `"$@"' to let each command-line parameter expand to a
+# separate word. The quotes around `$@' are essential!
+# We need TEMP as the `eval set --' would nuke the return value of
+# getopt.
+TEMP=`getopt -o ${SHORT_OPTS} --long ${LONG_OPTS} \
+ -n 'MAKEALL' -- "$@"`
+
+[ $? != 0 ] && usage 1
+
+# Note the quotes around `$TEMP': they are essential!
+eval set -- "$TEMP"
+
+SELECTED=''
+ONLY_LIST=''
+PRINT_MAINTS=''
+MAINTAINERS_ONLY=''
+CONTINUE=''
+REBUILD_ERRORS=''
+
+while true ; do
+ case "$1" in
+ -a|--arch)
+ # echo "Option ARCH: argument \`$2'"
+ if [ "$opt_a" ] ; then
+ opt_a="${opt_a%)} || \$2 == \"$2\")"
+ else
+ opt_a="(\$2 == \"$2\")"
+ fi
+ SELECTED='y'
+ shift 2 ;;
+ -c|--cpu)
+ # echo "Option CPU: argument \`$2'"
+ if [ "$opt_c" ] ; then
+ opt_c="${opt_c%)} || \$3 == \"$2\" || \$3 ~ /$2:/)"
+ else
+ opt_c="(\$3 == \"$2\" || \$3 ~ /$2:/)"
+ fi
+ SELECTED='y'
+ shift 2 ;;
+ -s|--soc)
+ # echo "Option SoC: argument \`$2'"
+ if [ "$opt_s" ] ; then
+ opt_s="${opt_s%)} || \$4 == \"$2\" || \$4 ~ /$2/)"
+ else
+ opt_s="(\$4 == \"$2\" || \$4 ~ /$2/)"
+ fi
+ SELECTED='y'
+ shift 2 ;;
+ -v|--vendor)
+ # echo "Option VENDOR: argument \`$2'"
+ if [ "$opt_v" ] ; then
+ opt_v="${opt_v%)} || \$5 == \"$2\")"
+ else
+ opt_v="(\$5 == \"$2\")"
+ fi
+ SELECTED='y'
+ shift 2 ;;
+ -b|--board)
+ # echo "Option BOARD: argument \`$2'"
+ if [ "$opt_b" ] ; then
+ opt_b="${opt_b%)} || \$6 == \"$2\" || \$7 == \"$2\")"
+ else
+ # We need to check the 7th field too
+ # for boards whose 6th field is "-"
+ opt_b="(\$6 == \"$2\" || \$7 == \"$2\")"
+ fi
+ SELECTED='y'
+ shift 2 ;;
+ -C|--check)
+ CHECK='C=1'
+ shift ;;
+ -n|--continue)
+ CONTINUE='y'
+ shift ;;
+ -r|--rebuild-errors)
+ REBUILD_ERRORS='y'
+ shift ;;
+ -l|--list)
+ ONLY_LIST='y'
+ shift ;;
+ -m|--maintainers)
+ ONLY_LIST='y'
+ PRINT_MAINTS='y'
+ MAINTAINERS_ONLY='y'
+ shift ;;
+ -M|--mails)
+ ONLY_LIST='y'
+ PRINT_MAINTS='y'
+ shift ;;
+ -h|--help)
+ usage ;;
+ --)
+ shift ; break ;;
+ *)
+ echo "Internal error!" >&2 ; exit 1 ;;
+ esac
+done
+# echo "Remaining arguments:"
+# for arg do echo '--> '"\`$arg'" ; done
+
+FILTER="\$1 !~ /^#/"
+[ "$opt_a" ] && FILTER="${FILTER} && $opt_a"
+[ "$opt_c" ] && FILTER="${FILTER} && $opt_c"
+[ "$opt_s" ] && FILTER="${FILTER} && $opt_s"
+[ "$opt_v" ] && FILTER="${FILTER} && $opt_v"
+[ "$opt_b" ] && FILTER="${FILTER} && $opt_b"
+
+if [ "$SELECTED" ] ; then
+ SELECTED=$(awk '('"$FILTER"') { print $7 }' boards.cfg)
+
+ # Make sure some boards from boards.cfg are actually found
+ if [ -z "$SELECTED" ] ; then
+ echo "Error: No boards selected, invalid arguments"
+ exit 1
+ fi
+fi
+
+#########################################################################
# Print statistics when we exit
trap exit 1 2 3 15
JOBS=""
fi
-
-if [ "${CROSS_COMPILE}" ] ; then
- MAKE="make CROSS_COMPILE=${CROSS_COMPILE}"
-else
- MAKE=make
-fi
-
if [ "${MAKEALL_LOGDIR}" ] ; then
LOG_DIR=${MAKEALL_LOGDIR}
else
LOG_DIR="LOG"
fi
-if [ ! "${BUILD_DIR}" ] ; then
- BUILD_DIR="."
+: ${BUILD_NBUILDS:=1}
+BUILD_MANY=0
+
+if [ "${BUILD_NBUILDS}" -gt 1 ] ; then
+ BUILD_MANY=1
+ : ${BUILD_DIR:=./build}
+ mkdir -p "${BUILD_DIR}/ERR"
+ find "${BUILD_DIR}/ERR/" -type f -exec rm -f {} +
fi
-[ -d ${LOG_DIR} ] || mkdir ${LOG_DIR} || exit 1
+: ${BUILD_DIR:=.}
+
+OUTPUT_PREFIX="${BUILD_DIR}"
+
+[ -d ${LOG_DIR} ] || mkdir "${LOG_DIR}" || exit 1
+if [ "$CONTINUE" != 'y' -a "$REBUILD_ERRORS" != 'y' ] ; then
+ find "${LOG_DIR}/" -type f -exec rm -f {} +
+fi
LIST=""
# Keep track of the number of builds and errors
ERR_CNT=0
ERR_LIST=""
+WRN_CNT=0
+WRN_LIST=""
TOTAL_CNT=0
+SKIP_CNT=0
+CURRENT_CNT=0
+OLDEST_IDX=1
RC=0
+# Helper funcs for parsing boards.cfg
+targets_by_field()
+{
+ field=$1
+ regexp=$2
+
+ awk '($1 !~ /^#/ && $'"$field"' ~ /^'"$regexp"'$/) { print $7 }' \
+ boards.cfg
+}
+
+targets_by_arch() { targets_by_field 2 "$@" ; }
+targets_by_cpu() { targets_by_field 3 "$@" ; targets_by_field 3 "$@:.*" ; }
+targets_by_soc() { targets_by_field 4 "$@" ; }
+
#########################################################################
## MPC5xx Systems
#########################################################################
-LIST_5xx=" \
- cmi_mpc5xx \
-"
+LIST_5xx="$(targets_by_cpu mpc5xx)"
#########################################################################
## MPC5xxx Systems
#########################################################################
-LIST_5xxx=" \
- BC3450 \
- cm5200 \
- cpci5200 \
- digsy_mtc \
- EVAL5200 \
- fo300 \
- galaxy5200 \
- icecube_5200 \
- inka4x0 \
- ipek01 \
- lite5200b \
- mcc200 \
- mecp5200 \
- motionpro \
- munices \
- MVBC_P \
- MVSMR \
- o2dnt \
- pcm030 \
- pf5200 \
- PM520 \
- TB5200 \
- Total5200 \
- Total5200_Rev2 \
- TQM5200 \
- TQM5200_B \
- TQM5200S \
- v38b \
-"
+LIST_5xxx="$(targets_by_cpu mpc5xxx)"
#########################################################################
## MPC512x Systems
#########################################################################
-LIST_512x=" \
- aria \
- mecp5123 \
- mpc5121ads \
- pdm360ng \
-"
+LIST_512x="$(targets_by_cpu mpc512x)"
#########################################################################
## MPC8xx Systems
#########################################################################
-LIST_8xx=" \
- Adder87x \
- AdderII \
- ADS860 \
- AMX860 \
- c2mon \
- CCM \
- cogent_mpc8xx \
- ELPT860 \
- EP88x \
- ESTEEM192E \
- ETX094 \
- FADS823 \
- FADS850SAR \
- FADS860T \
- FLAGADM \
- FPS850L \
- GEN860T \
- GEN860T_SC \
- GENIETV \
- GTH \
- hermes \
- IAD210 \
- ICU862_100MHz \
- IP860 \
- IVML24 \
- IVML24_128 \
- IVML24_256 \
- IVMS8 \
- IVMS8_128 \
- IVMS8_256 \
- KUP4K \
- KUP4X \
- LANTEC \
- lwmon \
- kmsupx4 \
- MBX \
- MBX860T \
- mgsuvd \
- MHPC \
- MPC86xADS \
- MPC885ADS \
- NETPHONE \
- NETTA \
- NETTA2 \
- NETTA_ISDN \
- NETVIA \
- NETVIA_V2 \
- NX823 \
- pcu_e \
- QS823 \
- QS850 \
- QS860T \
- quantum \
- R360MPI \
- RBC823 \
- rmu \
- RPXClassic \
- RPXlite \
- RPXlite_DW \
- RRvision \
- SM850 \
- spc1920 \
- SPD823TS \
- svm_sc8xx \
- SXNI855T \
- TK885D \
- TOP860 \
- TQM823L \
- TQM823L_LCD \
- TQM850L \
- TQM855L \
- TQM860L \
- TQM885D \
- uc100 \
- v37 \
-"
-
-#########################################################################
-## PPC4xx Systems
-#########################################################################
-LIST_4xx=" \
- acadia \
- acadia_nand \
- ADCIOP \
- alpr \
- AP1000 \
- APC405 \
- AR405 \
- arches \
- ASH405 \
- bamboo \
- bamboo_nand \
- bubinga \
- CANBT \
- canyonlands \
- canyonlands_nand \
- CMS700 \
- CPCI2DP \
- CPCI405 \
- CPCI4052 \
- CPCI405AB \
- CPCI405DT \
- CPCIISER4 \
- CRAYL1 \
- csb272 \
- csb472 \
- DASA_SIM \
- devconcenter \
- dlvision \
- DP405 \
- DU405 \
- DU440 \
- ebony \
- ERIC \
- fx12mm \
- G2000 \
- gdppc440etx \
- glacier \
- haleakala \
- haleakala_nand \
- hcu4 \
- hcu5 \
- HH405 \
- HUB405 \
- icon \
- intip \
- JSE \
- KAREF \
- katmai \
- kilauea \
- kilauea_nand \
- korat \
- luan \
- lwmon5 \
- makalu \
- mcu25 \
- METROBOX \
- MIP405 \
- MIP405T \
- ML2 \
- ml507 \
- ml507_flash \
- neo \
- ocotea \
- OCRTC \
- ORSG \
- p3p440 \
- PCI405 \
- pcs440ep \
- PIP405 \
- PLU405 \
- PMC405 \
- PMC405DE \
- PMC440 \
- PPChameleonEVB \
- quad100hd \
- rainier \
- redwood \
- sbc405 \
- sc3 \
- sequoia \
- sequoia_nand \
- t3corp \
- taihu \
- taishan \
- v5fx30teval \
- v5fx30teval_flash \
- VOH405 \
- VOM405 \
- W7OLMC \
- W7OLMG \
- walnut \
- WUH405 \
- xilinx-ppc440-generic \
- xilinx-ppc440-generic_flash \
- XPEDITE1000 \
- yellowstone \
- yosemite \
- yucca \
- zeus \
-"
+LIST_8xx="$(targets_by_cpu mpc8xx)"
#########################################################################
-## MPC8220 Systems
+## PPC4xx Systems
#########################################################################
-LIST_8220=" \
- Alaska8220 \
- Yukon8220 \
-"
+LIST_4xx="$(targets_by_cpu ppc4xx)"
#########################################################################
## MPC824x Systems
#########################################################################
-LIST_824x=" \
- A3000 \
- barco \
- BMW \
- CPC45 \
- CU824 \
- debris \
- eXalion \
- HIDDEN_DRAGON \
- IDS8247 \
- linkstation_HGLAN \
- MOUSSE \
- MUSENKI \
- MVBLUE \
- OXC \
- PN62 \
- Sandpoint8240 \
- Sandpoint8245 \
- sbc8240 \
- utx8245 \
-"
+LIST_824x="$(targets_by_cpu mpc824x)"
#########################################################################
## MPC8260 Systems (includes 8250, 8255 etc.)
#########################################################################
-LIST_8260=" \
- atc \
- cogent_mpc8260 \
- CPU86 \
- CPU87 \
- ep8248 \
- ep8260 \
- ep82xxm \
- gw8260 \
- hymod \
- IPHASE4539 \
- ISPAN \
- mgcoge \
- MPC8260ADS \
- MPC8266ADS \
- MPC8272ADS \
- PM826 \
- PM828 \
- ppmc8260 \
- Rattler8248 \
- RPXsuper \
- rsdproto \
- sacsng \
- sbc8260 \
- SCM \
- TQM8260_AC \
- TQM8260_AD \
- TQM8260_AE \
- TQM8272 \
- ZPC1900 \
-"
+LIST_8260="$(targets_by_cpu mpc8260)"
#########################################################################
## MPC83xx Systems (includes 8349, etc.)
#########################################################################
-LIST_83xx=" \
- caddy2 \
- kmeter1 \
- MPC8313ERDB_33 \
- MPC8313ERDB_NAND_66 \
- MPC8315ERDB \
- MPC8315ERDB_NAND \
- MPC8323ERDB \
- MPC832XEMDS \
- MPC832XEMDS_ATM \
- MPC8349EMDS \
- MPC8349ITX \
- MPC8349ITXGP \
- MPC8360EMDS \
- MPC8360EMDS_ATM \
- MPC8360ERDK_33 \
- MPC8360ERDK_66 \
- MPC837XEMDS \
- MPC837XERDB \
- MVBLM7 \
- sbc8349 \
- SIMPC8313_LP \
- TQM834x \
- vme8349 \
-"
-
+LIST_83xx="$(targets_by_cpu mpc83xx)"
#########################################################################
## MPC85xx Systems (includes 8540, 8560 etc.)
#########################################################################
-LIST_85xx=" \
- ATUM8548 \
- MPC8536DS \
- MPC8536DS_NAND \
- MPC8536DS_SDCARD \
- MPC8536DS_SPIFLASH \
- MPC8536DS_36BIT \
- MPC8540ADS \
- MPC8540EVAL \
- MPC8541CDS \
- MPC8544DS \
- MPC8548CDS \
- MPC8555CDS \
- MPC8560ADS \
- MPC8568MDS \
- MPC8569MDS \
- MPC8569MDS_ATM \
- MPC8569MDS_NAND \
- MPC8572DS \
- MPC8572DS_36BIT \
- P2020DS \
- P2020DS_36BIT \
- P1011RDB \
- P1011RDB_NAND \
- P1011RDB_SDCARD \
- P1011RDB_SPIFLASH \
- P1020RDB \
- P1020RDB_NAND \
- P1020RDB_SDCARD \
- P1020RDB_SPIFLASH \
- P2010RDB \
- P2010RDB_NAND \
- P2010RDB_SDCARD \
- P2010RDB_SPIFLASH \
- P2020RDB \
- P2020RDB_NAND \
- P2020RDB_SDCARD \
- P2020RDB_SPIFLASH \
- PM854 \
- PM856 \
- sbc8540 \
- sbc8548 \
- sbc8548_PCI_33 \
- sbc8548_PCI_66 \
- sbc8548_PCI_33_PCIE \
- sbc8548_PCI_66_PCIE \
- sbc8560 \
- socrates \
- stxgp3 \
- stxssa \
- TQM8540 \
- TQM8541 \
- TQM8548 \
- TQM8548_AG \
- TQM8548_BE \
- TQM8555 \
- TQM8560 \
- XPEDITE5200 \
- XPEDITE5370 \
-"
+LIST_85xx="$(targets_by_cpu mpc85xx)"
#########################################################################
## MPC86xx Systems
#########################################################################
-LIST_86xx=" \
- MPC8610HPCD \
- MPC8641HPCN_36BIT \
- MPC8641HPCN \
- sbc8641d \
- XPEDITE5170 \
-"
+LIST_86xx="$(targets_by_cpu mpc86xx)"
#########################################################################
## 74xx/7xx Systems
#########################################################################
-LIST_74xx=" \
- DB64360 \
- DB64460 \
- EVB64260 \
- mpc7448hpc2 \
- P3G4 \
- p3m7448 \
- PCIPPC2 \
- PCIPPC6 \
- ZUMA \
-"
-
-LIST_7xx=" \
- BAB7xx \
- CPCI750 \
- ELPPC \
- p3m750 \
- ppmc7xx \
-"
+LIST_74xx_7xx="$(targets_by_cpu 74xx_7xx)"
#########################################################################
## PowerPC groups
${LIST_512x} \
${LIST_5xxx} \
${LIST_8xx} \
- ${LIST_8220} \
${LIST_824x} \
${LIST_8260} \
${LIST_83xx} \
${LIST_85xx} \
${LIST_86xx} \
${LIST_4xx} \
- ${LIST_74xx} \
- ${LIST_7xx} \
+ ${LIST_74xx_7xx}\
"
# Alias "ppc" -> "powerpc" to not break compatibility with older scripts
## StrongARM Systems
#########################################################################
-LIST_SA=" \
- assabet \
- dnp1110 \
- gcplus \
- lart \
- shannon \
-"
+LIST_SA="$(targets_by_cpu sa1100)"
#########################################################################
## ARM7 Systems
#########################################################################
-LIST_ARM7=" \
- ap7 \
- ap720t \
- armadillo \
- B2 \
- ep7312 \
- evb4510 \
- impa7 \
- integratorap \
- lpc2292sodimm \
- modnet50 \
- SMN42 \
-"
+LIST_ARM7="$(targets_by_cpu arm720t)"
#########################################################################
## ARM9 Systems
#########################################################################
-LIST_ARM9=" \
- a320evb \
- ap920t \
- ap922_XA10 \
- ap926ejs \
- ap946es \
- ap966 \
- cp920t \
- cp922_XA10 \
- cp926ejs \
- cp946es \
- cp966 \
- da830evm \
- da850evm \
- edb9301 \
- edb9302 \
- edb9302a \
- edb9307 \
- edb9307a \
- edb9312 \
- edb9315 \
- edb9315a \
- edminiv2 \
- guruplug \
- imx27lite \
- lpd7a400 \
- magnesium \
- mv88f6281gtw_ge \
- mx1ads \
- mx1fs2 \
- netstar \
- nhk8815 \
- nhk8815_onenand \
- omap1510inn \
- omap1610h2 \
- omap1610inn \
- omap5912osk \
- omap730p2 \
- openrd_base \
- rd6281a \
- sbc2410x \
- scb9328 \
- sheevaplug \
- smdk2400 \
- smdk2410 \
- spear300 \
- spear310 \
- spear320 \
- spear600 \
- suen3 \
- trab \
- VCMA9 \
- versatile \
- versatileab \
- versatilepb \
- voiceblue \
- davinci_dvevm \
- davinci_schmoogie \
- davinci_sffsdr \
- davinci_sonata \
- davinci_dm355evm \
- davinci_dm355leopard \
- davinci_dm365evm \
- davinci_dm6467evm \
+LIST_ARM9="$(targets_by_cpu arm920t) \
+ $(targets_by_cpu arm926ejs) \
+ $(targets_by_cpu arm946es) \
"
#########################################################################
-## ARM10 Systems
+## ARM11 Systems
#########################################################################
-LIST_ARM10=" \
- integratorcp \
- cp1026 \
+LIST_ARM11="$(targets_by_cpu arm1136) \
+ $(targets_by_cpu arm1176) \
"
#########################################################################
-## ARM11 Systems
+## ARMV7 Systems
#########################################################################
-LIST_ARM11=" \
- cp1136 \
- omap2420h4 \
- apollon \
- imx31_litekit \
- imx31_phycore \
- imx31_phycore_eet \
- mx31ads \
- mx31pdk \
- mx31pdk_nand \
- qong \
- smdk6400 \
- tnetv107x_evm \
-"
+
+LIST_ARMV7="$(targets_by_cpu armv7)"
#########################################################################
-## ARMV7 Systems
+## ARMV8 Systems
#########################################################################
-LIST_ARMV7=" \
- am3517_evm \
- devkit8000 \
- mx51evk \
- omap3_beagle \
- omap3_overo \
- omap3_evm \
- omap3_pandora \
- omap3_sdp3430 \
- omap3_zoom1 \
- omap3_zoom2 \
- omap4_panda \
- omap4_sdp4430 \
- s5p_goni \
- smdkc100 \
-"
+
+LIST_ARMV8="$(targets_by_cpu armv8)"
#########################################################################
## AT91 Systems
#########################################################################
-LIST_at91=" \
- afeb9260 \
- at91cap9adk \
- at91rm9200dk \
- at91rm9200ek \
- at91sam9260ek \
- at91sam9261ek \
- at91sam9263ek \
- at91sam9g10ek \
- at91sam9g20ek \
- at91sam9m10g45ek \
- at91sam9rlek \
- cmc_pu2 \
- CPUAT91 \
- CPU9260 \
- CPU9G20 \
- csb637 \
- eb_cpux9k2 \
- kb9202 \
- meesc \
- mp2usb \
- m501sk \
- otc570 \
- pm9261 \
- pm9263 \
- pm9g45 \
- SBC35_A9G20 \
- TNY_A9260 \
- TNY_A9G20 \
-"
+LIST_at91="$(targets_by_soc at91)"
#########################################################################
## Xscale Systems
#########################################################################
-LIST_pxa=" \
- cerf250 \
- cradle \
- csb226 \
- delta \
- innokom \
- lubbock \
- pleb2 \
- polaris \
- pxa255_idp \
- trizepsiv \
- wepep250 \
- xaeniax \
- xm250 \
- xsengine \
- zylonite \
-"
+LIST_pxa="$(targets_by_cpu pxa)"
-LIST_ixp=" \
- actux1 \
- actux2 \
- actux3 \
- actux4 \
- ixdp425 \
- ixdpg425 \
- pdnb3 \
- scpu \
-"
+#########################################################################
+## SPEAr Systems
+#########################################################################
+
+LIST_spear="$(targets_by_soc spear)"
#########################################################################
## ARM groups
#########################################################################
-LIST_arm=" \
- ${LIST_SA} \
- ${LIST_ARM7} \
- ${LIST_ARM9} \
- ${LIST_ARM10} \
- ${LIST_ARM11} \
- ${LIST_ARMV7} \
- ${LIST_at91} \
- ${LIST_pxa} \
- ${LIST_ixp} \
+LIST_arm="$(targets_by_arch arm | \
+ for ARMV8_TARGET in $LIST_ARMV8; \
+ do sed "/$ARMV8_TARGET/d"; \
+ done) \
"
#########################################################################
LIST_mips4kc=" \
incaip \
+ incaip_100MHz \
+ incaip_133MHz \
+ incaip_150MHz \
qemu_mips \
vct_platinum \
vct_platinum_small \
vct_premium_onenand_small \
"
-LIST_mips5kc=" \
- purple \
-"
-
LIST_au1xx0=" \
dbau1000 \
dbau1100 \
dbau1500 \
dbau1550 \
- dbau1550_el \
- gth2 \
"
LIST_mips=" \
## MIPS Systems (little endian)
#########################################################################
-LIST_mips4kc_el=""
-
-LIST_mips5kc_el=""
-
LIST_au1xx0_el=" \
dbau1550_el \
pb1000 \
"
-
LIST_mips_el=" \
- ${LIST_mips4kc_el} \
- ${LIST_mips5kc_el} \
${LIST_au1xx0_el} \
"
-
#########################################################################
-## i386 Systems
+## OpenRISC Systems
#########################################################################
-LIST_I486=" \
- sc520_cdp \
- sc520_eNET \
- sc520_spunk \
- sc520_spunk_rel \
-"
+LIST_openrisc="$(targets_by_arch openrisc)"
-LIST_x86=" \
- ${LIST_I486} \
-"
+#########################################################################
+## x86 Systems
+#########################################################################
+
+LIST_x86="$(targets_by_arch x86)"
#########################################################################
## Nios-II Systems
#########################################################################
-LIST_nios2=" \
- EP1C20 \
- EP1S10 \
- EP1S40 \
- PCI5441 \
- PK1C20 \
- nios2-generic \
-"
+LIST_nios2="$(targets_by_arch nios2)"
#########################################################################
## MicroBlaze Systems
#########################################################################
-LIST_microblaze=" \
- microblaze-generic \
-"
+LIST_microblaze="$(targets_by_arch microblaze)"
#########################################################################
## ColdFire Systems
#########################################################################
-LIST_coldfire=" \
- astro_mcf5373l \
- cobra5272 \
- EB+MCF-EV123 \
- EB+MCF-EV123_internal \
- idmr \
- M5208EVBE \
- M52277EVB \
- M5235EVB \
- M5249EVB \
- M5253DEMO \
- M5253EVBE \
- M5271EVB \
- M5272C3 \
- M5275EVB \
- M5282EVB \
- M53017EVB \
- M5329AFEE \
- M5373EVB \
- M54451EVB \
- M54455EVB \
- M5475AFE \
- M5485AFE \
- TASREG \
-"
+LIST_m68k="$(targets_by_arch m68k)"
+LIST_coldfire=${LIST_m68k}
#########################################################################
## AVR32 Systems
#########################################################################
-LIST_avr32=" \
- atstk1002 \
- atstk1003 \
- atstk1004 \
- atstk1006 \
- atngw100 \
- favr-32-ezkit \
- hammerhead \
- mimc200 \
-"
+LIST_avr32="$(targets_by_arch avr32)"
#########################################################################
## Blackfin Systems
#########################################################################
-LIST_blackfin=" \
- bf518f-ezbrd \
- bf526-ezbrd \
- bf527-ezkit \
- bf527-ezkit-v2 \
- bf533-ezkit \
- bf533-stamp \
- bf537-minotaur \
- bf537-pnav \
- bf537-srv1 \
- bf537-stamp \
- bf538f-ezkit \
- bf548-ezkit \
- bf561-acvilon \
- bf561-ezkit \
- blackstamp \
- cm-bf527 \
- cm-bf533 \
- cm-bf537e \
- cm-bf537u \
- cm-bf548 \
- cm-bf561 \
- ibf-dsp561 \
- ip04 \
- tcm-bf518 \
- tcm-bf537 \
-"
+LIST_blackfin="$(targets_by_arch blackfin)"
#########################################################################
## SH Systems
#########################################################################
-LIST_sh2=" \
- rsk7203 \
-"
-LIST_sh3=" \
- mpr2 \
- ms7720se \
-"
-
-LIST_sh4=" \
- ms7750se \
- ms7722se \
- MigoR \
- r7780mp \
- r2dplus \
- sh7763rdp \
- sh7785lcr \
- ap325rxa \
- espt \
-"
+LIST_sh2="$(targets_by_cpu sh2)"
+LIST_sh3="$(targets_by_cpu sh3)"
+LIST_sh4="$(targets_by_cpu sh4)"
-LIST_sh=" \
- ${LIST_sh2} \
- ${LIST_sh3} \
- ${LIST_sh4} \
-"
+LIST_sh="$(targets_by_arch sh)"
#########################################################################
## SPARC Systems
#########################################################################
-LIST_sparc="gr_xc3s_1500 gr_cpci_ax2000 gr_ep2s60 grsim grsim_leon2"
+LIST_sparc="$(targets_by_arch sparc)"
-#-----------------------------------------------------------------------
+#########################################################################
+## NDS32 Systems
+#########################################################################
+
+LIST_nds32="$(targets_by_arch nds32)"
-#----- for now, just run PowerPC by default -----
-[ $# = 0 ] && set $LIST_powerpc
+#########################################################################
+## ARC Systems
+#########################################################################
+
+LIST_arc="$(targets_by_arch arc)"
#-----------------------------------------------------------------------
+get_target_location() {
+ local target=$1
+ local BOARD_NAME=""
+ local CONFIG_NAME=""
+ local board=""
+ local vendor=""
+
+ # Automatic mode
+ local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
+ if [ -z "${line}" ] ; then echo "" ; return ; fi
+
+ set ${line}
+
+ CONFIG_NAME="${7%_config}"
+
+ [ "${BOARD_NAME}" ] || BOARD_NAME="${7%_config}"
+
+ if [ $# -gt 5 ]; then
+ if [ "$6" = "-" ] ; then
+ board=${BOARD_NAME}
+ else
+ board="$6"
+ fi
+ fi
+
+ [ $# -gt 4 ] && [ "$5" != "-" ] && vendor="$5"
+ [ $# -gt 6 ] && [ "$8" != "-" ] && {
+ tmp="${8%:*}"
+ if [ "$tmp" ] ; then
+ CONFIG_NAME="$tmp"
+ fi
+ }
+
+ # Assign board directory to BOARDIR variable
+ if [ "${vendor}" == "-" ] ; then
+ BOARDDIR=${board}
+ else
+ BOARDDIR=${vendor}/${board}
+ fi
+
+ echo "${CONFIG_NAME}:${BOARDDIR}:${BOARD_NAME}"
+}
+
+get_target_maintainers() {
+ local name=`echo $1 | cut -d : -f 3`
+
+ local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
+ if [ -z "${line}" ]; then
+ echo ""
+ return ;
+ fi
+
+ local mails=`echo ${line} | cut -d ' ' -f 9- | sed -e 's/[^<]*<//' -e 's/>.*</ /' -e 's/>[^>]*$//'`
+ [ "$mails" == "-" ] && mails=""
+ echo "$mails"
+}
+
+get_target_arch() {
+ local target=$1
+
+ # Automatic mode
+ local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
+
+ if [ -z "${line}" ] ; then echo "" ; return ; fi
+
+ set ${line}
+ echo "$2"
+}
+
+list_target() {
+ if [ "$PRINT_MAINTS" != 'y' ] ; then
+ echo "$1"
+ return
+ fi
+
+ echo -n "$1:"
+
+ local loc=`get_target_location $1`
+
+ if [ -z "${loc}" ] ; then echo "ERROR" ; return ; fi
+
+ local maintainers_result=`get_target_maintainers ${loc} | tr " " "\n"`
+
+ if [ "$MAINTAINERS_ONLY" != 'y' ] ; then
+
+ local dir=`echo ${loc} | cut -d ":" -f 2`
+ local cfg=`echo ${loc} | cut -d ":" -f 1`
+ local git_result=`git log --format=%aE board/${dir} \
+ include/configs/${cfg}.h | grep "@"`
+ local git_result_recent=`echo ${git_result} | tr " " "\n" | \
+ head -n 3`
+ local git_result_top=`echo ${git_result} | tr " " "\n" | \
+ sort | uniq -c | sort -nr | head -n 3 | \
+ sed "s/^ \+[0-9]\+ \+//"`
+
+ echo -e "$git_result_recent\n$git_result_top\n$maintainers_result" | \
+ sort -u | tr "\n" " " | sed "s/ $//" ;
+ else
+ echo -e "$maintainers_result" | sort -u | tr "\n" " " | \
+ sed "s/ $//" ;
+ fi
+
+ echo ""
+}
+
+# Each finished build will have a file called ${donep}${n},
+# where n is the index of the build. Each build
+# we've already noted as finished will have ${skipp}${n}.
+# The code managing the build process will use this information
+# to ensure that only BUILD_NBUILDS builds are in flight at once
+donep="${LOG_DIR}/._done_"
+skipp="${LOG_DIR}/._skip_"
+
+build_target_killed() {
+ echo "Aborted $target build."
+ # Remove the logs for this board since it was aborted
+ rm -f ${LOG_DIR}/$target.MAKELOG ${LOG_DIR}/$target.ERR
+ exit
+}
+
build_target() {
target=$1
+ build_idx=$2
+
+ if [ "$ONLY_LIST" == 'y' ] ; then
+ list_target ${target}
+ return
+ fi
+
+ if [ $BUILD_MANY == 1 ] ; then
+ output_dir="${OUTPUT_PREFIX}/${target}"
+ mkdir -p "${output_dir}"
+ trap build_target_killed TERM
+ else
+ output_dir="${OUTPUT_PREFIX}"
+ fi
+
+ target_arch=$(get_target_arch ${target})
+ eval cross_toolchain=\$CROSS_COMPILE_`echo $target_arch | tr '[:lower:]' '[:upper:]'`
+ if [ "${cross_toolchain}" ] ; then
+ MAKE="make CROSS_COMPILE=${cross_toolchain}"
+ elif [ "${CROSS_COMPILE}" ] ; then
+ MAKE="make CROSS_COMPILE=${CROSS_COMPILE}"
+ else
+ MAKE=make
+ fi
+
+ if [ "${output_dir}" != "." ] ; then
+ MAKE="${MAKE} O=${output_dir}"
+ fi
${MAKE} distclean >/dev/null
- ${MAKE} ${target}_config
+ ${MAKE} -s ${target}_config
- ${MAKE} ${JOBS} all 2>&1 >${LOG_DIR}/$target.MAKELOG \
- | tee ${LOG_DIR}/$target.ERR
+ ${MAKE} ${JOBS} ${CHECK} all \
+ >${LOG_DIR}/$target.MAKELOG 2> ${LOG_DIR}/$target.ERR
# Check for 'make' errors
if [ ${PIPESTATUS[0]} -ne 0 ] ; then
RC=1
fi
- if [ -s ${LOG_DIR}/$target.ERR ] ; then
- ERR_CNT=$((ERR_CNT + 1))
- ERR_LIST="${ERR_LIST} $target"
+ if [ $BUILD_MANY == 1 ] ; then
+ trap - TERM
+
+ ${MAKE} -s clean
+
+ if [ -s ${LOG_DIR}/${target}.ERR ] ; then
+ cp ${LOG_DIR}/${target}.ERR ${OUTPUT_PREFIX}/ERR/${target}
+ else
+ rm ${LOG_DIR}/${target}.ERR
+ fi
else
- rm ${LOG_DIR}/$target.ERR
+ if [ -s ${LOG_DIR}/${target}.ERR ] ; then
+ if grep -iw error ${LOG_DIR}/${target}.ERR ; then
+ : $(( ERR_CNT += 1 ))
+ ERR_LIST="${ERR_LIST} $target"
+ else
+ : $(( WRN_CNT += 1 ))
+ WRN_LIST="${WRN_LIST} $target"
+ fi
+ else
+ rm ${LOG_DIR}/${target}.ERR
+ fi
+ fi
+
+ OBJS=${output_dir}/u-boot
+ if [ -e ${output_dir}/spl/u-boot-spl ]; then
+ OBJS="${OBJS} ${output_dir}/spl/u-boot-spl"
fi
- TOTAL_CNT=$((TOTAL_CNT + 1))
+ ${CROSS_COMPILE}size ${OBJS} | tee -a ${LOG_DIR}/$target.MAKELOG
+
+ [ -e "${LOG_DIR}/${target}.ERR" ] && cat "${LOG_DIR}/${target}.ERR"
+
+ touch "${donep}${build_idx}"
+}
+
+manage_builds() {
+ search_idx=${OLDEST_IDX}
+ if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
+
+ while true; do
+ if [ -e "${donep}${search_idx}" ] ; then
+ : $(( CURRENT_CNT-- ))
+ [ ${OLDEST_IDX} -eq ${search_idx} ] &&
+ : $(( OLDEST_IDX++ ))
+
+ # Only want to count it once
+ rm -f "${donep}${search_idx}"
+ touch "${skipp}${search_idx}"
+ elif [ -e "${skipp}${search_idx}" ] ; then
+ [ ${OLDEST_IDX} -eq ${search_idx} ] &&
+ : $(( OLDEST_IDX++ ))
+ fi
+ : $(( search_idx++ ))
+ if [ ${search_idx} -gt ${TOTAL_CNT} ] ; then
+ if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
+ search_idx=${OLDEST_IDX}
+ sleep 1
+ else
+ break
+ fi
+ fi
+ done
+}
- ${CROSS_COMPILE}size ${BUILD_DIR}/u-boot \
- | tee -a ${LOG_DIR}/$target.MAKELOG
+build_targets() {
+ for t in "$@" ; do
+ # If a LIST_xxx var exists, use it. But avoid variable
+ # expansion in the eval when a board name contains certain
+ # characters that the shell interprets.
+ case ${t} in
+ *[-+=]*) list= ;;
+ *) list=$(eval echo '${LIST_'$t'}') ;;
+ esac
+ if [ -n "${list}" ] ; then
+ build_targets ${list}
+ else
+ : $((TOTAL_CNT += 1))
+ : $((CURRENT_CNT += 1))
+ rm -f "${donep}${TOTAL_CNT}"
+ rm -f "${skipp}${TOTAL_CNT}"
+ if [ "$CONTINUE" = 'y' -a -e ${LOG_DIR}/$t.MAKELOG ] ; then
+ : $((SKIP_CNT += 1))
+ touch "${donep}${TOTAL_CNT}"
+ elif [ "$REBUILD_ERRORS" = 'y' -a ! -e ${LOG_DIR}/$t.ERR ] ; then
+ : $((SKIP_CNT += 1))
+ touch "${donep}${TOTAL_CNT}"
+ else
+ if [ $BUILD_MANY == 1 ] ; then
+ build_target ${t} ${TOTAL_CNT} &
+ else
+ CUR_TGT="${t}"
+ build_target ${t} ${TOTAL_CNT}
+ CUR_TGT=''
+ fi
+ fi
+ fi
+
+ # We maintain a running count of all the builds we have done.
+ # Each finished build will have a file called ${donep}${n},
+ # where n is the index of the build. Each build
+ # we've already noted as finished will have ${skipp}${n}.
+ # We track the current index via TOTAL_CNT, and the oldest
+ # index. When we exceed the maximum number of parallel builds,
+ # We look from oldest to current for builds that have completed,
+ # and update the current count and oldest index as appropriate.
+ # If we've gone through the entire list, wait a second, and
+ # reprocess the entire list until we find a build that has
+ # completed
+ if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
+ manage_builds
+ fi
+ done
}
#-----------------------------------------------------------------------
+kill_children() {
+ local OS=$(uname -s)
+ local children=""
+ case "${OS}" in
+ "Darwin")
+ # Mac OS X is known to have BSD style ps
+ local pgid=$(ps -p $$ -o pgid | sed -e "/PGID/d")
+ children=$(ps -g $pgid -o pid | sed -e "/PID\|$$\|$pgid/d")
+ ;;
+ *)
+ # everything else tries the GNU style
+ local pgid=$(ps -p $$ --no-headers -o "%r" | tr -d ' ')
+ children=$(pgrep -g $pgid | sed -e "/$$\|$pgid/d")
+ ;;
+ esac
+
+ kill $children 2> /dev/null
+ wait $children 2> /dev/null
+
+ exit
+}
+
print_stats() {
+ if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
+
+ # Only count boards that completed
+ : $((TOTAL_CNT = `find ${skipp}* 2> /dev/null | wc -l`))
+
+ rm -f ${donep}* ${skipp}*
+
+ if [ $BUILD_MANY == 1 ] && [ -e "${OUTPUT_PREFIX}/ERR" ] ; then
+ ERR_LIST=`grep -riwl error ${OUTPUT_PREFIX}/ERR/`
+ ERR_LIST=`for f in $ERR_LIST ; do echo -n " $(basename $f)" ; done`
+ ERR_CNT=`echo $ERR_LIST | wc -w | awk '{print $1}'`
+ WRN_LIST=`grep -riwL error ${OUTPUT_PREFIX}/ERR/`
+ WRN_LIST=`for f in $WRN_LIST ; do echo -n " $(basename $f)" ; done`
+ WRN_CNT=`echo $WRN_LIST | wc -w | awk '{print $1}'`
+ else
+ # Remove the logs for any board that was interrupted
+ rm -f ${LOG_DIR}/${CUR_TGT}.MAKELOG ${LOG_DIR}/${CUR_TGT}.ERR
+ fi
+
+ : $((TOTAL_CNT -= ${SKIP_CNT}))
echo ""
echo "--------------------- SUMMARY ----------------------------"
+ if [ "$CONTINUE" = 'y' -o "$REBUILD_ERRORS" = 'y' ] ; then
+ echo "Boards skipped: ${SKIP_CNT}"
+ fi
echo "Boards compiled: ${TOTAL_CNT}"
if [ ${ERR_CNT} -gt 0 ] ; then
- echo "Boards with warnings or errors: ${ERR_CNT} (${ERR_LIST} )"
+ echo "Boards with errors: ${ERR_CNT} (${ERR_LIST} )"
+ fi
+ if [ ${WRN_CNT} -gt 0 ] ; then
+ echo "Boards with warnings but no errors: ${WRN_CNT} (${WRN_LIST} )"
fi
echo "----------------------------------------------------------"
+ if [ $BUILD_MANY == 1 ] ; then
+ kill_children
+ fi
+
exit $RC
}
#-----------------------------------------------------------------------
-for arg in $@
-do
- case "$arg" in
- arm|SA|ARM7|ARM9|ARM10|ARM11|ARMV7|at91|ixp|pxa \
- |avr32 \
- |blackfin \
- |coldfire \
- |microblaze \
- |mips|mips_el \
- |nios2 \
- |ppc|powerpc|5xx|5xxx|512x|8xx|8220|824x|8260|83xx|85xx|86xx|4xx|7xx|74xx|TSEC \
- |sh|sh2|sh3|sh4 \
- |sparc \
- |x86|I486 \
- )
- for target in `eval echo '$LIST_'${arg}`
- do
- build_target ${target}
- done
- ;;
- *) build_target ${arg}
- ;;
- esac
-done
+
+# Build target groups selected by options, plus any command line args
+set -- ${SELECTED} "$@"
+# run PowerPC by default
+[ $# = 0 ] && set -- powerpc
+build_targets "$@"
+wait