select CMD_PART if PARTITIONS
select CMD_PING if CMD_NET
select CMD_PXE if NET
+ select CMD_SYSBOOT
select ENV_VARS_UBOOT_CONFIG
select HUSH_PARSER
select SUPPORT_RAW_INITRD
config SYS_MALLOC_LEN
hex "Define memory for Dynamic allocation"
- depends on ARCH_ZYNQ || ARCH_VERSAL || ARCH_STM32MP
+ depends on ARCH_ZYNQ || ARCH_VERSAL || ARCH_STM32MP || ARCH_ROCKCHIP
+ default 0x2000000 if ARCH_ROCKCHIP
help
This defines memory to be allocated for Dynamic allocation
TODO: Use for other architectures
config SPL_SYS_MALLOC_F_LEN
hex "Size of malloc() pool in SPL before relocation"
- depends on SYS_MALLOC_F
+ depends on SYS_MALLOC_F && SPL
default 0x2800 if RCAR_GEN3
default SYS_MALLOC_F_LEN
help
config TPL_SYS_MALLOC_F_LEN
hex "Size of malloc() pool in TPL before relocation"
- depends on SYS_MALLOC_F
+ depends on SYS_MALLOC_F && TPL
default SYS_MALLOC_F_LEN
help
Before relocation, memory is very limited on many platforms. Still,
string "SPL image used in the combined SPL+U-Boot image"
default "spl/boot.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
default "spl/u-boot-spl.bin"
+ depends on SPL
help
Select the SPL build target that shall be generated by the SPL
build process (default spl/u-boot-spl.bin). This image will be
default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_GEN5
default "u-boot-spl.kwb" if ARCH_MVEBU && SPL
default "u-boot-elf.srec" if RCAR_GEN3
- default "u-boot.itb" if SPL_LOAD_FIT && (ROCKCHIP_RK3399 || ARCH_SUNXI)
+ default "u-boot.itb" if SPL_LOAD_FIT && (ARCH_ROCKCHIP || \
+ ARCH_SUNXI || RISCV)
default "u-boot.kwb" if KIRKWOOD
default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
+ default "u-boot-with-spl.imx" if ARCH_MX6 && SPL
help
Some SoCs need special image types (e.g. U-Boot binary
with a special header) as build targets. By defining
Path within the source tree to the linker script to use for the
main U-Boot binary.
+config ERR_PTR_OFFSET
+ hex
+ default 0x0
+ help
+ Some U-Boot pointers have redundant information, so we can use a
+ scheme where we can return either an error code or a pointer with the
+ same return value. The default implementation just casts the pointer
+ to a number, however, this may fail on platforms where the end of the
+ address range is used for valid pointers (e.g. 0xffffff00 is a valid
+ heap pointer in socfpga SPL).
+ For such platforms, this value provides an upper range of those error
+ pointer values - up to 'MAX_ERRNO' bytes below this value must be
+ unused/invalid addresses.
+
endmenu # General setup
menu "Boot images"
check the legacy image format is disabled by default, so that
unsigned images cannot be loaded. If a board needs the legacy image
format support in this case, enable it using
- CONFIG_IMAGE_FORMAT_LEGACY.
+ CONFIG_LEGACY_IMAGE_FORMAT.
config FIT_SIGNATURE_MAX_SIZE
hex "Max size of signed FIT structures"
depends on SPL_FIT
default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI
default "arch/arm/mach-rockchip/make_fit_atf.py" if SPL_LOAD_FIT && ARCH_ROCKCHIP
+ default "arch/riscv/lib/mkimage_fit_opensbi.sh" if SPL_LOAD_FIT && RISCV
help
Specifies a (platform specific) script file to generate the FIT
source file used to build the U-Boot FIT image file. This gets
endif # FIT
-config IMAGE_FORMAT_LEGACY
+config LEGACY_IMAGE_FORMAT
bool "Enable support for the legacy image format"
default y if !FIT_SIGNATURE
help
configuration to Kconfig. Since this option will be removed sometime,
new boards should not use this option.
-config SYS_TEXT_BASE
+config HAVE_SYS_TEXT_BASE
+ bool
depends on !NIOS2 && !XTENSA
depends on !EFI_APP
+ default y
+
+config SYS_TEXT_BASE
+ depends on HAVE_SYS_TEXT_BASE
default 0x80800000 if ARCH_OMAP2PLUS || ARCH_K3
default 0x4a000000 if ARCH_SUNXI && !MACH_SUN9I && !MACH_SUN8I_V3S
default 0x2a000000 if ARCH_SUNXI && MACH_SUN9I
help
The address in memory that U-Boot will be running from, initially.
-
-
config SYS_CLK_FREQ
depends on ARC || ARCH_SUNXI || MPC83xx
int "CPU clock frequency"