INSTALLATION ON THE WIN32 PLATFORM
----------------------------------
- Heres a few comments about building OpenSSL in Windows environments. Most of
- this is tested on Win32 but it may also work in Win 3.1 with some
- modification. See the end of this file for Eric's original comments.
+ [Instructions for building for Windows CE can be found in INSTALL.WCE]
+
+ Heres a few comments about building OpenSSL in Windows environments. Most
+ of this is tested on Win32 but it may also work in Win 3.1 with some
+ modification.
+
+ You need Perl for Win32. Unless you will build on Cygwin, you will need
+ ActiveState Perl, available from http://www.activestate.com/ActivePerl.
- You need Perl for Win32 (available from http://www.activestate.com/ActivePerl)
and one of the following C compilers:
* Visual C++
* Borland C
- * GNU C (Mingw32 or Cygwin32)
+ * GNU C (Cygwin or MinGW)
+
+ If you are compiling from a tarball or a CVS snapshot then the Win32 files
+ may well be not up to date. This may mean that some "tweaking" is required to
+ get it all to work. See the trouble shooting section later on for if (when?)
+ it goes wrong.
+
+ Visual C++
+ ----------
If you want to compile in the assembly language routines with Visual C++ then
you will need an assembler. This is worth doing because it will result in
* Microsoft MASM (aka "ml")
* Free Netwide Assembler NASM.
- MASM was I believe distributed in the past with VC++ and it is also part of
- the MSDN SDKs. It is no longer distributed as part of VC++ and can be hard
- to get hold of. It can be purchased: see Microsoft's site for details at:
- http://www.microsoft.com/
+ MASM is distributed with most versions of VC++. For the versions where it is
+ not included in VC++, it is also distributed with some Microsoft DDKs, for
+ example the Windows NT 4.0 DDK and the Windows 98 DDK. If you do not have
+ either of these DDKs then you can just download the binaries for the Windows
+ 98 DDK and extract and rename the two files XXXXXml.exe and XXXXXml.err, to
+ ml.exe and ml.err and install somewhere on your PATH. Both DDKs can be
+ downloaded from the Microsoft developers site www.msdn.com.
NASM is freely available. Version 0.98 was used during testing: other versions
may also work. It is available from many places, see for example:
http://www.kernel.org/pub/software/devel/nasm/binaries/win32/
The NASM binary nasmw.exe needs to be installed anywhere on your PATH.
- If you are compiling from a tarball or a CVS snapshot then the Win32 files
- may well be not up to date. This may mean that some "tweaking" is required to
- get it all to work. See the trouble shooting section later on for if (when?)
- it goes wrong.
-
- Visual C++
- ----------
-
- Firstly you should run Configure:
+ Firstly you should run Configure (to build a FIPS-certified variant of
+ OpenSSL, add the option "fips"):
> perl Configure VC-WIN32
Next you need to build the Makefiles and optionally the assembly language
- files:
+ files (to build a FIPS-certified variant of OpenSSL, add the argument "fips"):
- If you are using MASM then run:
> ms\do_ms
If you get errors about things not having numbers assigned then check the
- troubleshooting section: you probably wont be able to compile it as it
+ troubleshooting section: you probably won't be able to compile it as it
stands.
Then from the VC++ environment at a prompt do:
There are various changes you can make to the Win32 compile environment. By
default the library is not compiled with debugging symbols. If you add 'debug'
- to the mk1mk.pl lines in the do_* batch file then debugging symbols will be
- compiled in.
+ to the mk1mf.pl lines in the do_* batch file then debugging symbols will be
+ compiled in. Note that mk1mf.pl expects the platform to be the last argument
+ on the command line, so 'debug' must appear before that, as all other options.
The default Win32 environment is to leave out any Windows NT specific
features.
You can also build a static version of the library using the Makefile
ms\nt.mak
+ Borland C++ builder 5
+ ---------------------
+
+ * Configure for building with Borland Builder (to build a FIPS-certified
+ variant of OpenSSL, add the option "fips"):
+ > perl Configure BC-32
+
+ * Create the appropriate makefile (to build a FIPS-certified variant of
+ OpenSSL, add the argument "fips")
+ > ms\do_nasm
+
+ * Build
+ > make -f ms\bcb.mak
+
Borland C++ builder 3 and 4
---------------------------
* Run make:
> make -f bcb.mak
- GNU C (Mingw32)
- ---------------
+ GNU C (Cygwin)
+ --------------
- To build OpenSSL, you need the Mingw32 package and GNU make.
+ Cygwin provides a bash shell and GNU tools environment running
+ on NT 4.0, Windows 9x, Windows ME, Windows 2000, and Windows XP.
+ Consequently, a make of OpenSSL with Cygwin is closer to a GNU
+ bash environment such as Linux than to other the other Win32
+ makes.
+
+ Cygwin implements a Posix/Unix runtime system (cygwin1.dll).
+ It is also possible to create Win32 binaries that only use the
+ Microsoft C runtime system (msvcrt.dll or crtdll.dll) using
+ MinGW. MinGW can be used in the Cygwin development environment
+ or in a standalone setup as described in the following section.
+
+ To build OpenSSL using Cygwin:
+
+ * Install Cygwin (see http://cygwin.com/)
+
+ * Install Perl and ensure it is in the path. Both Cygwin perl
+ (5.6.1-2 or newer) and ActivePerl work.
+
+ * Run the Cygwin bash shell
+
+ * $ tar zxvf openssl-x.x.x.tar.gz
+ $ cd openssl-x.x.x
+
+ To build the Cygwin version of OpenSSL:
+
+ $ ./config
+ [...]
+ $ make
+ [...]
+ $ make test
+ $ make install
+
+ This will create a default install in /usr/local/ssl.
+
+ To build the MinGW version (native Windows) in Cygwin:
+
+ $ ./Configure mingw
+ [...]
+ $ make
+ [...]
+ $ make test
+ $ make install
+
+ Cygwin Notes:
+
+ "make test" and normal file operations may fail in directories
+ mounted as text (i.e. mount -t c:\somewhere /home) due to Cygwin
+ stripping of carriage returns. To avoid this ensure that a binary
+ mount is used, e.g. mount -b c:\somewhere /home.
+
+ "bc" is not provided in older Cygwin distribution. This causes a
+ non-fatal error in "make test" but is otherwise harmless. If
+ desired and needed, GNU bc can be built with Cygwin without change.
+
+ GNU C (MinGW)
+ -------------
* Compiler installation:
- Mingw32 is available from <ftp://ftp.xraylith.wisc.edu/pub/khan/gnu-win32/
- mingw32/egcs-1.1.2/egcs-1.1.2-mingw32.zip>. GNU make is at
- <ftp://agnes.dida.physik.uni-essen.de/home/janjaap/mingw32/binaries/
- make-3.76.1.zip>. Install both of them in C:\egcs-1.1.2 and run
- C:\egcs-1.1.2\mingw32.bat to set the PATH.
+ MinGW is available from http://www.mingw.org. Run the installer and
+ set the MinGW bin directory to the PATH in "System Properties" or
+ autoexec.bat.
* Compile OpenSSL:
- > perl Configure Mingw32
- > ms\mw.bat
+ > ms\mingw32
- This will create the library and binaries in out.
+ This will create the library and binaries in out. In case any problems
+ occur, try
+ > ms\mingw32 no-asm
+ instead.
+ If you want to build a FIPS-certified variant of OpenSSL, add the argument
+ "fips"
libcrypto.a and libssl.a are the static libraries. To use the DLLs,
link with libeay32.a and libssl32.a instead.
> cd out
> ..\ms\test
+
+ Installation
+ ------------
+
+ If you used the Cygwin procedure above, you have already installed and
+ can skip this section. For all other procedures, there's currently no real
+ installation procedure for Win32. There are, however, some suggestions:
+
+ - do nothing. The include files are found in the inc32/ subdirectory,
+ all binaries are found in out32dll/ or out32/ depending if you built
+ dynamic or static libraries.
+
+ - do as is written in INSTALL.Win32 that comes with modssl:
+
+ $ md c:\openssl
+ $ md c:\openssl\bin
+ $ md c:\openssl\lib
+ $ md c:\openssl\include
+ $ md c:\openssl\include\openssl
+ $ copy /b inc32\openssl\* c:\openssl\include\openssl
+ $ copy /b out32dll\ssleay32.lib c:\openssl\lib
+ $ copy /b out32dll\libeay32.lib c:\openssl\lib
+ $ copy /b out32dll\ssleay32.dll c:\openssl\bin
+ $ copy /b out32dll\libeay32.dll c:\openssl\bin
+ $ copy /b out32dll\openssl.exe c:\openssl\bin
+
+ Of course, you can choose another device than c:. C: is used here
+ because that's usually the first (and often only) harddisk device.
+ Note: in the modssl INSTALL.Win32, p: is used rather than c:.
+
+
Troubleshooting
---------------
assigned in the CVS tree: so anything linked against this version of the
library may need to be recompiled.
- If you get errors about unresolved externals then this means that either you
- didn't read the note above about functions not having numbers assigned or
- someone forgot to add a function to the header file.
+ If you get errors about unresolved symbols there are several possible
+ causes.
+
+ If this happens when the DLL is being linked and you have disabled some
+ ciphers then it is possible the DEF file generator hasn't removed all
+ the disabled symbols: the easiest solution is to edit the DEF files manually
+ to delete them. The DEF files are ms\libeay32.def ms\ssleay32.def.
- In this latter case check out the header file to see if the function is
- defined in the header file.
+ Another cause is if you missed or ignored the errors about missing numbers
+ mentioned above.
If you get warnings in the code then the compilation will halt.
malloc(), free() and realloc() as the application. However there are many
standard library functions used by OpenSSL that call malloc() internally
(e.g. fopen()), and OpenSSL cannot change these; so in general you cannot
- rely on CYRPTO_malloc_init() solving your problem, and you should
+ rely on CRYPTO_malloc_init() solving your problem, and you should
consistently use the multithreaded library.