INSTALLATION ON THE WIN32 PLATFORM
----------------------------------
- Heres a few comments about building OpenSSL in Windows environments. Most of
- this is tested on Win32 but it may also work in Win 3.1 with some
+ [Instructions for building for Windows CE can be found in INSTALL.WCE]
+
+ Heres a few comments about building OpenSSL in Windows environments. Most
+ of this is tested on Win32 but it may also work in Win 3.1 with some
modification.
- You need Perl for Win32 (available from http://www.activestate.com/ActivePerl)
+ You need Perl for Win32. Unless you will build on Cygwin, you will need
+ ActiveState Perl, available from http://www.activestate.com/ActivePerl.
+
and one of the following C compilers:
* Visual C++
* Borland C
- * GNU C (Mingw32 or Cygwin32)
+ * GNU C (Cygwin or MinGW)
+
+ If you are compiling from a tarball or a CVS snapshot then the Win32 files
+ may well be not up to date. This may mean that some "tweaking" is required to
+ get it all to work. See the trouble shooting section later on for if (when?)
+ it goes wrong.
+
+ Visual C++
+ ----------
If you want to compile in the assembly language routines with Visual C++ then
you will need an assembler. This is worth doing because it will result in
* Microsoft MASM (aka "ml")
* Free Netwide Assembler NASM.
- MASM was at one point distributed with VC++. It is now distributed with some
- Microsoft DDKs, for example the Windows NT 4.0 DDK and the Windows 98 DDK. If
- you do not have either of these DDKs then you can just download the binaries
- for the Windows 98 DDK and extract and rename the two files XXXXXml.exe and
- XXXXXml.err, to ml.exe and ml.err and install somewhere on your PATH. Both
- DDKs can be downloaded from the Microsoft developers site www.msdn.com.
+ MASM is distributed with most versions of VC++. For the versions where it is
+ not included in VC++, it is also distributed with some Microsoft DDKs, for
+ example the Windows NT 4.0 DDK and the Windows 98 DDK. If you do not have
+ either of these DDKs then you can just download the binaries for the Windows
+ 98 DDK and extract and rename the two files XXXXXml.exe and XXXXXml.err, to
+ ml.exe and ml.err and install somewhere on your PATH. Both DDKs can be
+ downloaded from the Microsoft developers site www.msdn.com.
NASM is freely available. Version 0.98 was used during testing: other versions
may also work. It is available from many places, see for example:
http://www.kernel.org/pub/software/devel/nasm/binaries/win32/
The NASM binary nasmw.exe needs to be installed anywhere on your PATH.
- If you are compiling from a tarball or a CVS snapshot then the Win32 files
- may well be not up to date. This may mean that some "tweaking" is required to
- get it all to work. See the trouble shooting section later on for if (when?)
- it goes wrong.
-
- Visual C++
- ----------
-
- Firstly you should run Configure:
+ Firstly you should run Configure (to build a FIPS-certified variant of
+ OpenSSL, add the option "fips"):
> perl Configure VC-WIN32
Next you need to build the Makefiles and optionally the assembly language
- files:
+ files (to build a FIPS-certified variant of OpenSSL, add the argument "fips"):
- If you are using MASM then run:
There are various changes you can make to the Win32 compile environment. By
default the library is not compiled with debugging symbols. If you add 'debug'
- to the mk1mk.pl lines in the do_* batch file then debugging symbols will be
- compiled in.
+ to the mk1mf.pl lines in the do_* batch file then debugging symbols will be
+ compiled in. Note that mk1mf.pl expects the platform to be the last argument
+ on the command line, so 'debug' must appear before that, as all other options.
The default Win32 environment is to leave out any Windows NT specific
features.
You can also build a static version of the library using the Makefile
ms\nt.mak
+ Borland C++ builder 5
+ ---------------------
+
+ * Configure for building with Borland Builder (to build a FIPS-certified
+ variant of OpenSSL, add the option "fips"):
+ > perl Configure BC-32
+
+ * Create the appropriate makefile (to build a FIPS-certified variant of
+ OpenSSL, add the argument "fips")
+ > ms\do_nasm
+
+ * Build
+ > make -f ms\bcb.mak
+
Borland C++ builder 3 and 4
---------------------------
* Run make:
> make -f bcb.mak
- GNU C (Mingw32)
- ---------------
-
- To build OpenSSL, you need the Mingw32 package and GNU make.
+ GNU C (Cygwin)
+ --------------
- * Compiler installation:
-
- Mingw32 is available from <ftp://ftp.xraylith.wisc.edu/pub/khan/
- gnu-win32/mingw32/gcc-2.95.2/gcc-2.95.2-msvcrt.exe>. GNU make is at
- <ftp://agnes.dida.physik.uni-essen.de/home/janjaap/mingw32/binaries/
- make-3.76.1.zip>. Install both of them in C:\egcs-1.1.2 and run
- C:\egcs-1.1.2\mingw32.bat to set the PATH.
+ Cygwin provides a bash shell and GNU tools environment running
+ on NT 4.0, Windows 9x, Windows ME, Windows 2000, and Windows XP.
+ Consequently, a make of OpenSSL with Cygwin is closer to a GNU
+ bash environment such as Linux than to other the other Win32
+ makes.
- * Compile OpenSSL:
-
- > ms\mingw32
+ Cygwin implements a Posix/Unix runtime system (cygwin1.dll).
+ It is also possible to create Win32 binaries that only use the
+ Microsoft C runtime system (msvcrt.dll or crtdll.dll) using
+ MinGW. MinGW can be used in the Cygwin development environment
+ or in a standalone setup as described in the following section.
- This will create the library and binaries in out. In case any problems
- occur, try
- > ms\mingw32 no-asm
- instead.
+ To build OpenSSL using Cygwin:
- libcrypto.a and libssl.a are the static libraries. To use the DLLs,
- link with libeay32.a and libssl32.a instead.
+ * Install Cygwin (see http://cygwin.com/)
- See troubleshooting if you get error messages about functions not having
- a number assigned.
+ * Install Perl and ensure it is in the path. Both Cygwin perl
+ (5.6.1-2 or newer) and ActivePerl work.
- * You can now try the tests:
+ * Run the Cygwin bash shell
- > cd out
- > ..\ms\test
-
- GNU C (CygWin32)
- ---------------
-
- CygWin32 provides a bash shell and GNU tools environment running on
- NT 4.0, Windows 9x and Windows 2000. Consequently, a make of OpenSSL
- with CygWin is closer to a GNU bash environment such as Linux rather
- than other W32 makes that are based on a single makefile approach.
- CygWin32 implements Posix/Unix calls through cygwin1.dll, and is
- contrasted to Mingw32 which links dynamically to msvcrt.dll or
- crtdll.dll.
+ * $ tar zxvf openssl-x.x.x.tar.gz
+ $ cd openssl-x.x.x
- To build OpenSSL using CygWin32:
+ To build the Cygwin version of OpenSSL:
- * Install CygWin32 (see http://sourceware.cygnus.com/cygwin)
+ $ ./config
+ [...]
+ $ make
+ [...]
+ $ make test
+ $ make install
- * Install Perl and ensure it is in the path (recent Cygwin perl or
- ActivePerl)
+ This will create a default install in /usr/local/ssl.
- * Run the CygWin bash shell
+ To build the MinGW version (native Windows) in Cygwin:
- * $ tar zxvf openssl-x.x.x.tar.gz
- $ cd openssl-x.x.x
- $ ./Configure no-threads CygWin32
+ $ ./Configure mingw
[...]
$ make
[...]
$ make test
$ make install
- This will create a default install in /usr/local/ssl.
-
- CygWin32 Notes:
+ Cygwin Notes:
"make test" and normal file operations may fail in directories
- mounted as text (i.e. mount -t c:\somewhere /home) due to CygWin
+ mounted as text (i.e. mount -t c:\somewhere /home) due to Cygwin
stripping of carriage returns. To avoid this ensure that a binary
mount is used, e.g. mount -b c:\somewhere /home.
- As of version 1.1.1 CygWin32 is relatively unstable in its handling
- of cr/lf issues. These make procedures succeeded with versions 1.1 and
- the snapshot 20000524 (Slow!).
-
- "bc" is not provided in the CygWin32 distribution. This causes a
+ "bc" is not provided in older Cygwin distribution. This causes a
non-fatal error in "make test" but is otherwise harmless. If
- desired, GNU bc can be built with CygWin32 without change.
+ desired and needed, GNU bc can be built with Cygwin without change.
+
+ GNU C (MinGW)
+ -------------
+
+ * Compiler installation:
+
+ MinGW is available from http://www.mingw.org. Run the installer and
+ set the MinGW bin directory to the PATH in "System Properties" or
+ autoexec.bat.
+
+ * Compile OpenSSL:
+
+ > ms\mingw32
+
+ This will create the library and binaries in out. In case any problems
+ occur, try
+ > ms\mingw32 no-asm
+ instead.
+ If you want to build a FIPS-certified variant of OpenSSL, add the argument
+ "fips"
+
+ libcrypto.a and libssl.a are the static libraries. To use the DLLs,
+ link with libeay32.a and libssl32.a instead.
+
+ See troubleshooting if you get error messages about functions not having
+ a number assigned.
+
+ * You can now try the tests:
+
+ > cd out
+ > ..\ms\test
Installation
------------
- There's currently no real installation procedure for Win32. There are,
- however, some suggestions:
+ If you used the Cygwin procedure above, you have already installed and
+ can skip this section. For all other procedures, there's currently no real
+ installation procedure for Win32. There are, however, some suggestions:
- do nothing. The include files are found in the inc32/ subdirectory,
all binaries are found in out32dll/ or out32/ depending if you built
$ md c:\openssl\lib
$ md c:\openssl\include
$ md c:\openssl\include\openssl
- $ copy /b inc32\* c:\openssl\include\openssl
+ $ copy /b inc32\openssl\* c:\openssl\include\openssl
$ copy /b out32dll\ssleay32.lib c:\openssl\lib
$ copy /b out32dll\libeay32.lib c:\openssl\lib
$ copy /b out32dll\ssleay32.dll c:\openssl\bin
malloc(), free() and realloc() as the application. However there are many
standard library functions used by OpenSSL that call malloc() internally
(e.g. fopen()), and OpenSSL cannot change these; so in general you cannot
- rely on CYRPTO_malloc_init() solving your problem, and you should
+ rely on CRYPTO_malloc_init() solving your problem, and you should
consistently use the multithreaded library.