# see INSTALL for instructions.
-my $usage="Usage: Configure [no-<cipher> ...] [enable-<cipher> ...] [experimental-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [no-hw-xxx|no-hw] [[no-]threads] [[no-]shared] [[no-]zlib|zlib-dynamic] [no-asm] [no-dso] [no-krb5] [sctp] [386] [--prefix=DIR] [--openssldir=OPENSSLDIR] [--with-xxx[=vvv]] [--test-sanity] [--config=FILE] os/compiler[:flags]\n";
+my $usage="Usage: Configure [no-<cipher> ...] [enable-<cipher> ...] [experimental-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [no-hw-xxx|no-hw] [[no-]threads] [[no-]shared] [[no-]zlib|zlib-dynamic] [no-asm] [no-dso] [sctp] [386] [--prefix=DIR] [--openssldir=OPENSSLDIR] [--with-xxx[=vvv]] [--test-sanity] [--config=FILE] os/compiler[:flags]\n";
# Options:
#
# default). This needn't be set in advance, you can
# just as well use "make INSTALL_PREFIX=/whatever install".
#
-# --with-krb5-dir Declare where Kerberos 5 lives. The libraries are expected
-# to live in the subdirectory lib/ and the header files in
-# include/. A value is required.
-# --with-krb5-lib Declare where the Kerberos 5 libraries live. A value is
-# required.
-# (Default: KRB5_DIR/lib)
-# --with-krb5-include Declare where the Kerberos 5 header files live. A
-# value is required.
-# (Default: KRB5_DIR/include)
-# --with-krb5-flavor Declare what flavor of Kerberos 5 is used. Currently
-# supported values are "MIT" and "Heimdal". A value is required.
-#
# --test-sanity Make a number of sanity checks on the data in this file.
# This is a debugging tool for OpenSSL developers.
#
# no-asm do not use assembler
# no-dso do not compile in any native shared-library methods. This
# will ensure that all methods just return NULL.
-# no-krb5 do not compile in any KRB5 library or code.
# [no-]zlib [don't] compile support for zlib compression.
# zlib-dynamic Like "zlib", but the zlib library is expected to be a shared
# library and will be loaded in run-time by the OpenSSL library.
# Minimum warning options... any contributions to OpenSSL should at least get
# past these.
-my $gcc_devteam_warn = "-Wall -pedantic -DPEDANTIC -Wno-long-long -Wsign-compare -Wmissing-prototypes -Wshadow -Wformat -Werror -DCRYPTO_MDEBUG_ALL -DCRYPTO_MDEBUG_ABORT -DREF_CHECK";
+my $gcc_devteam_warn = "-Wall -pedantic -DPEDANTIC -Wno-long-long -Wsign-compare -Wmissing-prototypes -Wshadow -Wformat -Wtype-limits -Werror -DCRYPTO_MDEBUG_ALL -DCRYPTO_MDEBUG_ABORT -DREF_CHECK -DDEBUG_UNUSED";
-my $clang_disabled_warnings = "-Wno-language-extension-token -Wno-extended-offsetof -Wno-padded -Wno-shorten-64-to-32 -Wno-format-nonliteral -Wno-missing-noreturn -Wno-unused-parameter -Wno-sign-conversion -Wno-unreachable-code -Wno-conversion -Wno-documentation -Wno-missing-variable-declarations -Wno-cast-align -Wno-incompatible-pointer-types-discards-qualifiers -Wno-missing-variable-declarations -Wno-missing-field-initializers -Wno-unused-macros -Wno-disabled-macro-expansion -Wno-conditional-uninitialized -Wno-switch-enum";
+# These are used in addition to $gcc_devteam_warn when the compiler is clang.
+# TODO(openssl-team): fix problems and investigate if (at least) the
+# following warnings can also be enabled: -Wconditional-uninitialized,
+# -Wswitch-enum, -Wunused-macros, -Wmissing-field-initializers,
+# -Wmissing-variable-declarations,
+# -Wincompatible-pointer-types-discards-qualifiers, -Wcast-align,
+# -Wunreachable-code -Wunused-parameter -Wlanguage-extension-token
+# -Wextended-offsetof
+my $clang_devteam_warn = "-Wno-unused-parameter -Wno-missing-field-initializers -Wno-language-extension-token -Wno-extended-offsetof";
my $strict_warnings = 0;
# MD2_CHAR slags pentium pros
my $x86_gcc_opts="RC4_INDEX MD2_INT";
-# MODIFY THESE PARAMETERS IF YOU ARE GOING TO USE THE 'util/speed.sh SCRIPT
-# Don't worry about these normally
-
-my $tcc="cc";
-my $tflags="-fast -Xa";
-my $tbn_mul="";
-my $tlib="-lnsl -lsocket";
#$bits1="SIXTEEN_BIT ";
#$bits2="THIRTY_TWO_BIT ";
my $bits1="THIRTY_TWO_BIT ";
my $bits2="SIXTY_FOUR_BIT ";
-my $x86_asm="x86cpuid.o:bn-586.o co-586.o x86-mont.o x86-gf2m.o:ecp_nistz256.o ecp_nistz256-x86.o:des-586.o crypt586.o:aes-586.o vpaes-x86.o aesni-x86.o:bf-586.o:md5-586.o:sha1-586.o sha256-586.o sha512-586.o:cast-586.o:rc4-586.o:rmd-586.o:rc5-586.o:wp_block.o wp-mmx.o:cmll-x86.o:ghash-x86.o:e_padlock-x86.o";
-my $x86_asm_nocast=$x86_asm;$x86_asm_nocast=~s/cast\-586\.o//;
-
-my $x86_elf_asm="$x86_asm:elf";
-my $android_x86_elf_asm="$x86_asm:android";
-
-my $x86_64_asm="x86_64cpuid.o:x86_64-gcc.o x86_64-mont.o x86_64-mont5.o x86_64-gf2m.o rsaz_exp.o rsaz-x86_64.o rsaz-avx2.o:ecp_nistz256.o ecp_nistz256-x86_64.o::aes-x86_64.o vpaes-x86_64.o bsaes-x86_64.o aesni-x86_64.o aesni-sha1-x86_64.o aesni-sha256-x86_64.o aesni-mb-x86_64.o::md5-x86_64.o:sha1-x86_64.o sha256-x86_64.o sha512-x86_64.o sha1-mb-x86_64.o sha256-mb-x86_64.o::rc4-x86_64.o rc4-md5-x86_64.o:::wp-x86_64.o:cmll-x86_64.o cmll_misc.o:ghash-x86_64.o aesni-gcm-x86_64.o:e_padlock-x86_64.o";
-my $win_x86_64_asm=$x86_asm;$win_x86_64_asm=~s/x86_64-gcc\.o/bn_asm.o/;
-my $ia64_asm="ia64cpuid.o:bn-ia64.o ia64-mont.o:::aes_core.o aes_cbc.o aes-ia64.o::md5-ia64.o:sha1-ia64.o sha256-ia64.o sha512-ia64.o::rc4-ia64.o rc4_skey.o:::::ghash-ia64.o::void";
-my $sparcv9_asm="sparcv9cap.o sparccpuid.o:bn-sparcv9.o sparcv9-mont.o sparcv9a-mont.o vis3-mont.o sparct4-mont.o sparcv9-gf2m.o::des_enc-sparc.o fcrypt_b.o dest4-sparcv9.o:aes_core.o aes_cbc.o aes-sparcv9.o aest4-sparcv9.o::md5-sparcv9.o:sha1-sparcv9.o sha256-sparcv9.o sha512-sparcv9.o::::::camellia.o cmll_misc.o cmll_cbc.o cmllt4-sparcv9.o:ghash-sparcv9.o::void";
-my $sparcv8_asm=":sparcv8.o::des_enc-sparc.o fcrypt_b.o:::::::::::::void";
-my $alpha_asm="alphacpuid.o:bn_asm.o alpha-mont.o::::::sha1-alpha.o:::::::ghash-alpha.o::void";
-my $mips64_asm=":bn-mips.o mips-mont.o:::aes_cbc.o aes-mips.o:::sha1-mips.o sha256-mips.o sha512-mips.o::::::::";
-my $mips32_asm=$mips64_asm; $mips32_asm =~ s/\s*sha512\-mips\.o//;
-my $s390x_asm="s390xcap.o s390xcpuid.o:bn-s390x.o s390x-mont.o s390x-gf2m.o:::aes-s390x.o aes-ctr.o aes-xts.o:::sha1-s390x.o sha256-s390x.o sha512-s390x.o::rc4-s390x.o:::::ghash-s390x.o:";
-my $s390x_32_asm=$s390x_asm;$s390x_32_asm=~s/bn\-s390x\.o/bn_asm.o/;
-my $armv4_asm="armcap.o armv4cpuid.o:bn_asm.o armv4-mont.o armv4-gf2m.o:ecp_nistz256.o ecp_nistz256-armv4.o::aes_cbc.o aes-armv4.o bsaes-armv7.o aesv8-armx.o:::sha1-armv4-large.o sha256-armv4.o sha512-armv4.o:::::::ghash-armv4.o ghashv8-armx.o::void";
-my $aarch64_asm="armcap.o arm64cpuid.o mem_clr.o::::aes_core.o aes_cbc.o aesv8-armx.o:::sha1-armv8.o sha256-armv8.o sha512-armv8.o:::::::ghashv8-armx.o:";
-my $parisc11_asm="pariscid.o:bn_asm.o parisc-mont.o:::aes_core.o aes_cbc.o aes-parisc.o:::sha1-parisc.o sha256-parisc.o sha512-parisc.o::rc4-parisc.o:::::ghash-parisc.o::32";
-my $parisc20_64_asm="pariscid.o:pa-risc2W.o parisc-mont.o:::aes_core.o aes_cbc.o aes-parisc.o:::sha1-parisc.o sha256-parisc.o sha512-parisc.o::rc4-parisc.o:::::ghash-parisc.o::64";
-my $parisc20_32_asm=$parisc20_64_asm;$parisc20_32_asm=~s/2W\./2\./;$parisc20_32_asm=~s/:64/:32/;
-my $ppc64_asm="ppccpuid.o ppccap.o:bn-ppc.o ppc-mont.o ppc64-mont.o:::aes_core.o aes_cbc.o aes-ppc.o vpaes-ppc.o aesp8-ppc.o:::sha1-ppc.o sha256-ppc.o sha512-ppc.o sha256p8-ppc.o sha512p8-ppc.o:::::::ghashp8-ppc.o:";
-my $ppc32_asm=$ppc64_asm;
-
# As for $BSDthreads. Idea is to maintain "collective" set of flags,
# which would cover all BSD flavors. -pthread applies to them all,
# but is treated differently. OpenBSD expands is as -D_POSIX_THREAD
template => 1,
cpuid_obj => "sparcv9cap.o sparccpuid.o",
bn_obj => "bn-sparcv9.o sparcv9-mont.o sparcv9a-mont.o vis3-mont.o sparct4-mont.o sparcv9-gf2m.o",
+ ec_obj => "ecp_nistz256.o ecp_nistz256-sparcv9.o",
des_obj => "des_enc-sparc.o fcrypt_b.o dest4-sparcv9.o",
aes_obj => "aes_core.o aes_cbc.o aes-sparcv9.o aest4-sparcv9.o",
md5_obj => "md5-sparcv9.o",
aarch64_asm => {
template => 1,
cpuid_obj => "armcap.o arm64cpuid.o mem_clr.o",
- aes_obj => "aes_core.o aes_cbc.o aesv8-armx.o",
+ ec_obj => "ecp_nistz256.o ecp_nistz256-armv8.o",
+ bn_obj => "bn_asm.o armv8-mont.o",
+ aes_obj => "aes_core.o aes_cbc.o aesv8-armx.o vpaes-armv8.o",
sha1_obj => "sha1-armv8.o sha256-armv8.o sha512-armv8.o",
modes_obj => "ghashv8-armx.o",
},
my $threads=0;
my $no_shared=0; # but "no-shared" is default
my $zlib=1; # but "no-zlib" is default
-my $no_krb5=0; # but "no-krb5" is implied unless "--with-krb5-..." is used
my $no_rfc3779=1; # but "no-rfc3779" is default
my $no_asm=0;
my $no_dso=0;
my @skip=();
my $Makefile="Makefile";
my $des_locl="crypto/des/des_locl.h";
-my $des ="crypto/des/des.h";
-my $bn ="crypto/bn/bn.h";
-my $md2 ="crypto/md2/md2.h";
-my $rc4 ="crypto/rc4/rc4.h";
+my $des ="include/openssl/des.h";
+my $bn ="include/openssl/bn.h";
+my $md2 ="include/openssl/md2.h";
+my $rc4 ="include/openssl/rc4.h";
my $rc4_locl="crypto/rc4/rc4_locl.h";
-my $idea ="crypto/idea/idea.h";
-my $rc2 ="crypto/rc2/rc2.h";
+my $idea ="include/openssl/idea.h";
+my $rc2 ="include/openssl/rc2.h";
my $bf ="crypto/bf/bf_locl.h";
my $bn_asm ="bn_asm.o";
my $des_enc="des_enc.o fcrypt_b.o";
my $openssl_sys_defines="";
my $openssl_other_defines;
my $libs;
-my $libkrb5="";
my $target;
my $options;
-my $symlink;
my $make_depend=0;
my %withargs=();
my $build_prefix = "release_";
$libs="";
$target="";
$options="";
- $symlink=1;
$argv_unprocessed=0;
$argvstring=join(' ',@argvcopy);
{
$install_prefix=$1;
}
- elsif (/^--with-krb5-(dir|lib|include|flavor)=(.*)$/)
- {
- $withargs{"krb5-".$1}=$2;
- }
elsif (/^--with-zlib-lib=(.*)$/)
{
$withargs{"zlib-lib"}=$1;
$disabled{"sse2"} = "forced";
}
-if (!defined($withargs{"krb5-flavor"}) || $withargs{"krb5-flavor"} eq "")
- {
- $disabled{"krb5"} = "krb5-flavor not specified";
- }
-
if (!defined($disabled{"zlib-dynamic"}))
{
# "zlib-dynamic" was specifically enabled, so enable "zlib"
{ }
elsif (/^zlib-dynamic$/)
{ }
- elsif (/^symlinks$/)
- { $symlink = 0; }
elsif (/^sse2$/)
{ $no_sse2 = 1; }
else
$openssl_algorithm_defines .= "#define OPENSSL_NO_$ALGO\n";
print " OPENSSL_NO_$ALGO";
- if (/^krb5$/)
- { $no_krb5 = 1; }
- else
- {
- push @skip, $algo;
- # fix-up crypto/directory name(s)
- $skip[$#skip]="whrlpool" if $algo eq "whirlpool";
- $skip[$#skip]="ripemd" if $algo eq "rmd160";
+ push @skip, $algo;
+ # fix-up crypto/directory name(s)
+ $skip[$#skip]="whrlpool" if $algo eq "whirlpool";
+ $skip[$#skip]="ripemd" if $algo eq "rmd160";
- print " (skip dir)";
+ print " (skip dir)";
- $depflags .= " -DOPENSSL_NO_$ALGO";
- }
+ $depflags .= " -DOPENSSL_NO_$ALGO";
}
}
print "IsMK1MF=$IsMK1MF\n";
# Allow environment CC to override compiler...
-my $cc = $ENV{CC} || $table{$t}->{cc};
+my $cc = $ENV{CC} || $table{$target}->{cc};
# For cflags and lflags, add the debug_ or release_ attributes
# Do it in such a way that no spurious space is appended (hence the grep).
my $cflags = join(" ",
- grep { $_ } ($table{$t}->{cflags},
- $table{$t}->{$build_prefix."cflags"}));
+ grep { $_ } ($table{$target}->{cflags},
+ $table{$target}->{$build_prefix."cflags"}));
my $lflags = join(" ",
- grep { $_ } ($table{$t}->{lflags},
- $table{$t}->{$build_prefix."lflags"}));
-
-my $unistd = $table{$t}->{unistd};
-my $thread_cflag = $table{$t}->{thread_cflag};
-my $sys_id = $table{$t}->{sys_id};
-my $bn_ops = $table{$t}->{bn_ops};
-my $cpuid_obj = $table{$t}->{cpuid_obj};
-my $bn_obj = $table{$t}->{bn_obj};
-my $ec_obj = $table{$t}->{ec_obj};
-my $des_obj = $table{$t}->{des_obj};
-my $aes_obj = $table{$t}->{aes_obj};
-my $bf_obj = $table{$t}->{bf_obj};
-my $md5_obj = $table{$t}->{md5_obj};
-my $sha1_obj = $table{$t}->{sha1_obj};
-my $cast_obj = $table{$t}->{cast_obj};
-my $rc4_obj = $table{$t}->{rc4_obj};
-my $rmd160_obj = $table{$t}->{rmd160_obj};
-my $rc5_obj = $table{$t}->{rc5_obj};
-my $wp_obj = $table{$t}->{wp_obj};
-my $cmll_obj = $table{$t}->{cmll_obj};
-my $modes_obj = $table{$t}->{modes_obj};
-my $engines_obj = $table{$t}->{engines_obj};
-my $perlasm_scheme = $table{$t}->{perlasm_scheme};
-my $dso_scheme = $table{$t}->{dso_scheme};
-my $shared_target = $table{$t}->{shared_target};
-my $shared_cflag = $table{$t}->{shared_cflag};
-my $shared_ldflag = $table{$t}->{shared_ldflag};
-my $shared_extension = $table{$t}->{shared_extension};
-my $ranlib = $ENV{'RANLIB'} || $table{$t}->{ranlib};
+ grep { $_ } ($table{$target}->{lflags},
+ $table{$target}->{$build_prefix."lflags"}));
+
+my $unistd = $table{$target}->{unistd};
+my $thread_cflag = $table{$target}->{thread_cflag};
+my $sys_id = $table{$target}->{sys_id};
+my $bn_ops = $table{$target}->{bn_ops};
+my $cpuid_obj = $table{$target}->{cpuid_obj};
+my $bn_obj = $table{$target}->{bn_obj};
+my $ec_obj = $table{$target}->{ec_obj};
+my $des_obj = $table{$target}->{des_obj};
+my $aes_obj = $table{$target}->{aes_obj};
+my $bf_obj = $table{$target}->{bf_obj};
+my $md5_obj = $table{$target}->{md5_obj};
+my $sha1_obj = $table{$target}->{sha1_obj};
+my $cast_obj = $table{$target}->{cast_obj};
+my $rc4_obj = $table{$target}->{rc4_obj};
+my $rmd160_obj = $table{$target}->{rmd160_obj};
+my $rc5_obj = $table{$target}->{rc5_obj};
+my $wp_obj = $table{$target}->{wp_obj};
+my $cmll_obj = $table{$target}->{cmll_obj};
+my $modes_obj = $table{$target}->{modes_obj};
+my $engines_obj = $table{$target}->{engines_obj};
+my $perlasm_scheme = $table{$target}->{perlasm_scheme};
+my $dso_scheme = $table{$target}->{dso_scheme};
+my $shared_target = $table{$target}->{shared_target};
+my $shared_cflag = $table{$target}->{shared_cflag};
+my $shared_ldflag = $table{$target}->{shared_ldflag};
+my $shared_extension = $table{$target}->{shared_extension};
+my $ranlib = $ENV{'RANLIB'} || $table{$target}->{ranlib};
my $ar = $ENV{'AR'} || "ar";
-my $arflags = $table{$t}->{arflags};
-my $multilib = $table{$t}->{multilib};
+my $arflags = $table{$target}->{arflags};
+my $multilib = $table{$target}->{multilib};
# if $prefix/lib$multilib is not an existing directory, then
# assume that it's not searched by linker automatically, in
if ($flags ne "") { $cflags="$flags$cflags"; }
else { $no_user_cflags=1; }
-# Kerberos settings. The flavor must be provided from outside, either through
-# the script "config" or manually.
-if (!$no_krb5)
- {
- my ($lresolv, $lpath, $lext);
- if ($withargs{"krb5-flavor"} =~ /^[Hh]eimdal$/)
- {
- die "Sorry, Heimdal is currently not supported\n";
- }
- ##### HACK to force use of Heimdal.
- ##### WARNING: Since we don't really have adequate support for Heimdal,
- ##### using this will break the build. You'll have to make
- ##### changes to the source, and if you do, please send
- ##### patches to openssl-dev@openssl.org
- if ($withargs{"krb5-flavor"} =~ /^force-[Hh]eimdal$/)
- {
- warn "Heimdal isn't really supported. Your build WILL break\n";
- warn "If you fix the problems, please send a patch to openssl-dev\@openssl.org\n";
- $withargs{"krb5-dir"} = "/usr/heimdal"
- if $withargs{"krb5-dir"} eq "";
- $withargs{"krb5-lib"} = "-L".$withargs{"krb5-dir"}.
- "/lib -lgssapi -lkrb5 -lcom_err"
- if $withargs{"krb5-lib"} eq "" && !$IsMK1MF;
- $cflags="-DKRB5_HEIMDAL $cflags";
- }
- if ($withargs{"krb5-flavor"} =~ /^[Mm][Ii][Tt]/)
- {
- $withargs{"krb5-dir"} = "/usr/kerberos"
- if $withargs{"krb5-dir"} eq "";
- $withargs{"krb5-lib"} = "-L".$withargs{"krb5-dir"}.
- "/lib -lgssapi_krb5 -lkrb5 -lcom_err -lk5crypto"
- if $withargs{"krb5-lib"} eq "" && !$IsMK1MF;
- $cflags="-DKRB5_MIT $cflags";
- $withargs{"krb5-flavor"} =~ s/^[Mm][Ii][Tt][._-]*//;
- if ($withargs{"krb5-flavor"} =~ /^1[._-]*[01]/)
- {
- $cflags="-DKRB5_MIT_OLD11 $cflags";
- }
- }
- LRESOLV:
- foreach $lpath ("/lib", "/usr/lib")
- {
- foreach $lext ("a", "so")
- {
- $lresolv = "$lpath/libresolv.$lext";
- last LRESOLV if (-r "$lresolv");
- $lresolv = "";
- }
- }
- $withargs{"krb5-lib"} .= " -lresolv"
- if ("$lresolv" ne "");
- $withargs{"krb5-include"} = "-I".$withargs{"krb5-dir"}."/include"
- if $withargs{"krb5-include"} eq "" &&
- $withargs{"krb5-dir"} ne "";
- }
-
# The DSO code currently always implements all functions so that no
# applications will have to worry about that from a compilation point
# of view. However, the "method"s may return zero unless that platform
my $shlib_major = "unknown";
my $shlib_minor = "unknown";
-open(IN,'<crypto/opensslv.h') || die "unable to read opensslv.h:$!\n";
+open(IN,'<include/openssl/opensslv.h') || die "unable to read opensslv.h:$!\n";
while (<IN>)
{
$version=$1 if /OPENSSL.VERSION.TEXT.*OpenSSL (\S+) /;
if ($strict_warnings)
{
+ my $ecc = $cc;
+ $ecc = "clang" if `$cc --version 2>&1` =~ /clang/;
my $wopt;
- die "ERROR --strict-warnings requires gcc or clang" unless ($cc =~ /gcc$/ or $cc =~ /clang$/);
+ die "ERROR --strict-warnings requires gcc or clang" unless ($ecc =~ /gcc$/ or $ecc =~ /clang$/);
foreach $wopt (split /\s+/, $gcc_devteam_warn)
{
$cflags .= " $wopt" unless ($cflags =~ /$wopt/)
}
+ if ($ecc eq "clang")
+ {
+ foreach $wopt (split /\s+/, $clang_devteam_warn)
+ {
+ $cflags .= " $wopt" unless ($cflags =~ /$wopt/)
+ }
+ }
}
open(IN,"<Makefile.org") || die "unable to read Makefile.org:$!\n";
s/^PROCESSOR=.*/PROCESSOR= $processor/;
s/^ARFLAGS=.*/ARFLAGS= $arflags/;
s/^PERL=.*/PERL= $perl/;
- s/^KRB5_INCLUDES=.*/KRB5_INCLUDES=$withargs{"krb5-include"}/;
- s/^LIBKRB5=.*/LIBKRB5=$withargs{"krb5-lib"}/;
s/^LIBZLIB=.*/LIBZLIB=$withargs{"zlib-lib"}/;
s/^ZLIB_INCLUDE=.*/ZLIB_INCLUDE=$withargs{"zlib-include"}/;
s/^FIPSLIBDIR=.*/FIPSLIBDIR=$fipslibdir/;
print "RANLIB =$ranlib\n";
print "ARFLAGS =$arflags\n";
print "PERL =$perl\n";
-print "KRB5_INCLUDES =",$withargs{"krb5-include"},"\n"
- if $withargs{"krb5-include"} ne "";
my $des_ptr=0;
my $des_risc1=0;
}
open(IN,'<crypto/opensslconf.h.in') || die "unable to read crypto/opensslconf.h.in:$!\n";
-unlink("crypto/opensslconf.h.new") || die "unable to remove old crypto/opensslconf.h.new:$!\n" if -e "crypto/opensslconf.h.new";
-open(OUT,'>crypto/opensslconf.h.new') || die "unable to create crypto/opensslconf.h.new:$!\n";
+unlink("include/openssl/opensslconf.h.new") || die "unable to remove old include/openssl/opensslconf.h.new:$!\n" if -e "include/openssl/opensslconf.h.new";
+open(OUT,'>include/openssl/opensslconf.h.new') || die "unable to create include/openssl/opensslconf.h.new:$!\n";
print OUT "/* opensslconf.h */\n";
print OUT "/* WARNING: Generated automatically from opensslconf.h.in by Configure. */\n\n";
print OUT "}\n";
print OUT "#endif\n";
close(OUT);
-rename("crypto/opensslconf.h","crypto/opensslconf.h.bak") || die "unable to rename crypto/opensslconf.h\n" if -e "crypto/opensslconf.h";
-rename("crypto/opensslconf.h.new","crypto/opensslconf.h") || die "unable to rename crypto/opensslconf.h.new\n";
+rename("include/openssl/opensslconf.h","include/openssl/opensslconf.h.bak") || die "unable to rename include/openssl/opensslconf.h\n" if -e "include/openssl/opensslconf.h";
+rename("include/openssl/opensslconf.h.new","include/openssl/opensslconf.h") || die "unable to rename include/openssl/opensslconf.h.new\n";
# Fix the date
} else {
my $make_command = "$make PERL=\'$perl\'";
my $make_targets = "";
- $make_targets .= " links" if $symlink;
$make_targets .= " depend" if $depflags ne $default_depflags && $make_depend;
- $make_targets .= " gentests" if $symlink;
(system $make_command.$make_targets) == 0 or die "make $make_targets failed"
if $make_targets ne "";
if ( $perl =~ m@^/@) {