# no-asm do not use assembler
# 386 generate 80386 code
# no-<cipher> build without specified algorithm (rsa, idea, rc5, ...)
-# -D, -L, -l, -f, -K: compiler options are passed through
+# -<xxx> +<xxx> compiler options are passed through
#
# DES_PTR use pointer lookup vs arrays in the DES in crypto/des/des_locl.h
# DES_RISC1 use different DES_ENCRYPT macro that helps reduce register
# Our development configs
"purify", "purify gcc:-g -DPURIFY -Wall:(unknown):-lsocket -lnsl::::",
"debug", "gcc:-DBN_DEBUG -DREF_CHECK -DCRYPTO_MDEBUG -ggdb -g2 -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations -Werror:(unknown):-lefence::::",
-"debug-ben", "gcc:-DBN_DEBUG -DREF_CHECK -DCRYPTO_MDEBUG -O2 -pedantic -Wall -Wshadow -Werror -pipe:(unknown):::::",
+"debug-ben", "gcc:-DBN_DEBUG -DREF_CHECK -DCRYPTO_MDEBUG -DPEDANTIC -O2 -pedantic -Wall -Wshadow -Werror -pipe:(unknown):::::",
"debug-ben-debug", "gcc:-DBN_DEBUG -DREF_CHECK -DCRYPTO_MDEBUG -g3 -O2 -pedantic -Wall -Wshadow -Werror -pipe:(unknown):::::",
"debug-ben-strict", "gcc:-DBN_DEBUG -DREF_CHECK -DCRYPTO_MDEBUG -DCONST_STRICT -O2 -Wall -Wshadow -Werror -Wpointer-arith -Wcast-qual -Wwrite-strings -pipe:(unknown):::::",
"debug-rse","cc:-DTERMIOS -DL_ENDIAN -pipe -O -g -ggdb3 -Wall:(unknown)::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm",
# Solaris setups
"solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN:-D_REENTRANT:-lsocket -lnsl:BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_sol_asm",
"solaris-sparc-gcc","gcc:-O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN:-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8.o::",
+"solaris-usparc-gcc","gcc:-O3 -fomit-frame-pointer -mcpu=ultrasparc -Wall -DB_ENDIAN -DULTRASPARC:-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8plus-gcc.o:::asm/md5-sparcv8plus.o:",
"debug-solaris-sparc-gcc","gcc:-O3 -g -mv8 -Wall -DB_ENDIAN:-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:::",
+"debug-solaris-usparc-gcc","gcc:-O3 -g -mcpu=ultrasparc -Wall -DB_ENDIAN:-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8plus-gcc.o::",
# DO NOT use /xO[34] on sparc with SC3.0. It is broken, and will not pass the tests
"solaris-sparc-cc","cc:-fast -O -Xa -DB_ENDIAN:-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_UNROLL BF_PTR:::",
# SC4 is ok, better than gcc even on bn as long as you tell it -xarch=v8
# -fast slows things like DES down quite a lot
# Don't use -xtarget=ultra with SC4.2. It is broken, and will break exptest.
-# SC5.0 with the compiler common patch works.
"solaris-sparc-sc4","cc:-xarch=v8 -xstrconst -xO5 -xdepend -Xa -DB_ENDIAN -DBN_DIV2W:-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o::",
-"solaris-usparc-sc4","cc:-xarch=v8plus -xstrconst -xO5 -xdepend -Xa -DB_ENDIAN -DBN_DIV2W:-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o::",
-"solaris-usparc-sc5","cc:-xtarget=ultra -xarch=v8plus -xstrconst -xO5 -xdepend -Xa -DB_ENDIAN -DBN_DIV2W:-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o::",
+"solaris-usparc-sc4","cc:-xarch=v8plus -xstrconst -xO5 -xdepend -Xa -DB_ENDIAN -DBN_DIV2W:-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o::",
+# SC5.0 note: Compiler common patch 107357-01 or later is required!
+"solaris-usparc-sc5","cc:-xtarget=ultra -xarch=v8plus -xstrconst -xO5 -xdepend -Xa -DB_ENDIAN -DULTRASPARC -DBN_DIV2W:-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o:",
+"solaris64-usparc-sc5","cc:-xtarget=ultra -xarch=v9 -xstrconst -xO5 -xdepend -Xa -DB_ENDIAN -DULTRASPARC:-D_REENTRANT:-lsocket -lnsl:SIXTY_FOUR_BIT_LONG RC4_CHAR DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o:",
# Sunos configs, assuming sparc for the gcc one.
##"sunos-cc", "cc:-O4 -DNOPROTO -DNOCONST:(unknown)::DES_UNROLL:::",
# This is the n64 mode build.
"irix-n64-cc", "cc:-64 -O2 -use_readonly_const -DTERMIOS:(unknown)::DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT:::",
-# HPUX config. I've been building on HPUX 9, so the options may be
-# different on version 10.
-"hpux-cc", "cc:-DB_ENDIAN -D_HPUX_SOURCE -Aa -Ae +ESlit +O4 -Wl,-a,archive:(unknown)::DES_PTR DES_UNROLL DES_RISC1:::",
-##"hpux-kr-cc", "cc:-DB_ENDIAN -DNOCONST -DNOPROTO -D_HPUX_SOURCE:(unknown)::DES_PTR DES_UNROLL:::",
-"hpux-gcc", "gcc:-DB_ENDIAN -O3:(unknown)::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::",
-# HPUX from www.globus.org
-"hpux11-32bit-cc","cc:+DA2.0 -DB_ENDIAN -D_HPUX_SOURCE -Aa -Ae +ESlit:(unknown)::DES_PTR DES_UNROLL DES_RISC1:::",
-"hpux11-64bit-cc","cc:+DA2.0W -g -D_HPUX_SOURCE -Aa -Ae +ESlit:(unknown)::SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT :::",
+# HPUX 9.X config.
+# Don't use the bundled cc. It is broken. Use HP ANSI C if possible, or gcc.
+"hpux-cc", "cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O4 -z:(unknown)::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::",
+"hpux-gcc", "gcc:-DB_ENDIAN -DBN_DIV2W -O3:(unknown)::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::",
+# HPUX 10.X config. Supports threads.
+"hpux10-cc", "cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O4 -z:-D_REENTRANT::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::",
+"hpux10-gcc", "gcc:-DB_ENDIAN -DBN_DIV2W -O3:-D_REENTRANT::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::",
+# HPUX 11.X from www.globus.org.
+# Only works on PA-RISC 2.0 cpus, and not optimized. Why?
+"hpux11-32bit-cc","cc:+DA2.0 -DB_ENDIAN -D_HPUX_SOURCE -Aa -Ae +ESlit:-D_REENTRANT::DES_PTR DES_UNROLL DES_RISC1:::",
+"hpux11-64bit-cc","cc:+DA2.0W -g -D_HPUX_SOURCE -Aa -Ae +ESlit:-D_REENTRANT::SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT :::",
# Dec Alpha, OSF/1 - the alpha164-cc is the flags for a 21164A with
# the new compiler
# CygWin32
"CygWin32", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall:(unknown)::BN_LLONG $x86_gcc_des $x86_gcc_opts:",
+"Mingw32", "gcc:-DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall:(unknown):BN_LLONG $x86_gcc_des $x86_gcc_opts:",
# Ultrix from Bernhard Simon <simon@zid.tuwien.ac.at>
"ultrix-cc","cc:-std1 -O -Olimit 1000 -DL_ENDIAN:(unknown)::::::",
);
my @WinTargets=qw(VC-NT VC-WIN32 VC-WIN16 VC-W31-16 VC-W31-32 VC-MSDOS BC-32
- BC-16 CygWin32);
+ BC-16 CygWin32 Mingw32);
my $prefix="";
my $openssldir="";
my $depflags="";
my $libs="";
my $target="";
+my $options="";
foreach (@ARGV)
{
if (/^no-asm$/)
$libs.= "-lRSAglue -lrsaref ";
$flags.= "-DRSAref ";
}
- elsif (/^-/)
+ elsif (/^[-+]/)
{
if (/^-[lL](.*)$/)
{
$libs.=$_." ";
}
- elsif (/^-[DfK](.*)$/)
+ elsif (/^-[^-]/ or /^\+/)
{
$flags.=$_." ";
}
exit(1);
}
}
- elsif ($_ =~ /^([^:]+):(.+)$/) {
+ elsif ($_ =~ /^([^:]+):(.+)$/)
+ {
eval "\$table{\$1} = \"$2\""; # allow $xxx constructs in the string
$target=$1;
- }
+ }
else
{
die "target already defined - $target\n" if ($target ne "");
$target=$_;
}
+ $options .= $_ unless $_ eq $target;
}
&usage if (!defined($table{$target}));
s/^OPENSSLDIR=.*$/OPENSSLDIR=$openssldir/;
s/^INSTALL_PREFIX=.*$/INSTALL_PREFIX=$install_prefix/;
s/^PLATFORM=.*$/PLATFORM=$target/;
+ s/^OPTIONS=.*$/OPTIONS=$options/;
s/^CC=.*$/CC= $cc/;
s/^CFLAG=.*$/CFLAG= $cflags/;
s/^DEPFLAG=.*$/DEPFLAG= $depflags/;
{ printf OUT "#define RC4_INT unsigned %s\n",$type[$rc4_int]; }
elsif (/^#((define)|(undef))\s+RC4_INDEX/)
{ printf OUT "#%s RC4_INDEX\n",($rc4_idx)?"define":"undef"; }
+ elsif (/^#(define|undef)\s+I386_ONLY/)
+ { printf OUT "#%s I386_ONLY\n", ($processor == 386)?
+ "define":"undef"; }
elsif (/^#define\s+MD2_INT\s/)
{ printf OUT "#define MD2_INT unsigned %s\n",$type[$md2_int]; }
elsif (/^#define\s+IDEA_INT\s/)
open (OUT,">crypto/date.h") || die "Can't open date.h";
printf OUT "#define DATE \"%s\"\n", scalar gmtime();
close(OUT);
+ system "perl crypto/objects/obj_dat.pl <crypto/objects/objects.h >crypto/objects/obj_dat.h";
} else {
(system "make -f Makefile.ssl PERL=\'$perl\' links") == 0 or exit $?;
- (system 'make depend') == 0 or exit $? if $depflags ne "";
+ ### (system 'make depend') == 0 or exit $? if $depflags ne "";
+ # Run "make depend" manually if you want to be able to delete
+ # the source code files of ciphers you left out.
&dofile("tools/c_rehash",$openssldir,'^DIR=', 'DIR=%s',);
- &dofile("util/mk1mf.pl",$openssldir,
- ('^\$INSTALLTOP=','$INSTALLTOP="%s";',));
}
-
my $pwd;
if($IsWindows) {
my $f; my $p; my %m; my @a; my $k; my $ff;
($f,$p,%m)=@_;
- open(IN,"<$f") || die "unable to open $f:$!\n";
+ open(IN,"<$f.in") || open(IN,"<$f") || die "unable to open $f:$!\n";
@a=<IN>;
close(IN);
foreach $k (keys %m)
open(OUT,">$ff.new") || die "unable to open $f:$!\n";
print OUT @a;
close(OUT);
- rename($f,"$ff.bak") || die "unable to rename $f\n";
+ rename($f,"$ff.bak") || die "unable to rename $f\n" if -e $f;
rename("$ff.new",$f) || die "unable to rename $ff.new\n";
}