## {- join("\n## ", @autowarntext) -}
{-
use File::Spec::Functions qw/:DEFAULT abs2rel rel2abs/;
+ use File::Basename;
- # Our prefix, claimed when speaking with the VSI folks Tuesday
- # January 26th 2016
- our $osslprefix = 'OSSL$';
- (our $osslprefix_q = $osslprefix) =~ s/\$/\\\$/;
+ (our $osslprefix_q = platform->osslprefix()) =~ s/\$/\\\$/;
- our $sover_dirname = sprintf "%02d%02d", split(/\./, $config{shlib_version_number});
+ our $sover_dirname = platform->shlib_version_as_filename();
our $osslver = sprintf "%02d%02d", split(/\./, $config{version});
our $sourcedir = $config{sourcedir};
# Because we need to make two computations of these data,
# we store them in arrays for reuse
our @libs =
- map { (my $x = $_) =~ s/\.a$//; $x }
+ map { platform->staticname($_) }
@{$unified_info{libraries}};
our @shlibs =
- map { $unified_info{sharednames}->{$_} || () }
- grep(!/\.a$/, @{$unified_info{libraries}});
+ map { platform->sharedname($_) // () }
+ @{$unified_info{libraries}};
our @install_libs =
- map { (my $x = $_) =~ s/\.a$//; $x }
- @{$unified_info{install}->{libraries}};
+ map { platform->staticname($_) }
+ grep { !$unified_info{attributes}->{$_}->{noinst} }
+ @{$unified_info{libraries}};
our @install_shlibs =
- map { $unified_info{sharednames}->{$_} || () }
- grep(!/\.a$/, @{$unified_info{install}->{libraries}});
- our @generated = ( ( map { (my $x = $_) =~ s|\.S$|\.s|; $x }
- grep { defined $unified_info{generate}->{$_} }
- map { @{$unified_info{sources}->{$_}} }
- grep { /\.o$/ } keys %{$unified_info{sources}} ),
- ( grep { /\.h$/ } keys %{$unified_info{generate}} ) );
+ map { platform->sharedname($_) // () }
+ grep { !$unified_info{attributes}->{$_}->{noinst} }
+ @{$unified_info{libraries}};
+ our @install_engines =
+ grep { !$unified_info{attributes}->{$_}->{noinst} }
+ @{$unified_info{engines}};
+ our @install_programs =
+ grep { !$unified_info{attributes}->{$_}->{noinst} }
+ @{$unified_info{programs}};
+ our @install_bin_scripts =
+ grep { !$unified_info{attributes}->{$_}->{noinst}
+ && !$unified_info{attributes}->{$_}->{misc} }
+ @{$unified_info{scripts}};
+ our @install_misc_scripts =
+ grep { !$unified_info{attributes}->{$_}->{noinst}
+ && $unified_info{attributes}->{$_}->{misc} }
+ @{$unified_info{scripts}};
# This is a horrible hack, but is needed because recursive inclusion of files
# in different directories does not work well with HP C.
my $sd = sourcedir("crypto", "async", "arch");
foreach (grep /\[\.crypto\.async\.arch\].*\.o$/, keys %{$unified_info{sources}}) {
- (my $x = $_) =~ s|\.o$|.OBJ|;
- $unified_info{before}->{$x}
+ my $obj = platform->obj($_);
+ $unified_info{before}->{$obj}
= qq(arch_include = F\$PARSE("$sd","A.;",,,"SYNTAX_ONLY") - "A.;"
define arch 'arch_include');
- $unified_info{after}->{$x}
+ $unified_info{after}->{$obj}
= qq(deassign arch);
}
my $sd1 = sourcedir("ssl","record");
my @ssl_locl_users = grep(/^\[\.(?:ssl\.(?:record|statem)|test)\].*\.o$/,
keys %{$unified_info{sources}});
foreach (@ssl_locl_users) {
- (my $x = $_) =~ s|\.o$|.OBJ|;
- $unified_info{before}->{$x}
+ my $obj = platform->obj($_);
+ $unified_info{before}->{$obj}
= qq(record_include = F\$PARSE("$sd1","A.;",,,"SYNTAX_ONLY") - "A.;"
define record 'record_include'
statem_include = F\$PARSE("$sd2","A.;",,,"SYNTAX_ONLY") - "A.;"
define statem 'statem_include');
- $unified_info{after}->{$x}
+ $unified_info{after}->{$obj}
= qq(deassign statem
deassign record);
}
# to testing.
VERBOSE=$(V)
-VERSION={- $config{version} -}
+VERSION={- "$config{full_version}" -}
MAJOR={- $config{major} -}
MINOR={- $config{minor} -}
-SHLIB_VERSION_NUMBER={- $config{shlib_version_number} -}
-SHLIB_VERSION_HISTORY={- $config{shlib_version_history} -}
-SHLIB_MAJOR={- $config{shlib_major} -}
-SHLIB_MINOR={- $config{shlib_minor} -}
+SHLIB_VERSION_NUMBER={- $config{shlib_version} -}
SHLIB_TARGET={- $target{shared_target} -}
-EXE_EXT=.EXE
-LIB_EXT=.OLB
-SHLIB_EXT=.EXE
-OBJ_EXT=.OBJ
-DEP_EXT=.D
-
LIBS={- join(", ", map { "-\n\t".$_.".OLB" } @libs) -}
SHLIBS={- join(", ", map { "-\n\t".$_.".EXE" } @shlibs) -}
ENGINES={- join(", ", map { "-\n\t".$_.".EXE" } @{$unified_info{engines}}) -}
PROGRAMS={- join(", ", map { "-\n\t".$_.".EXE" } @{$unified_info{programs}}) -}
SCRIPTS={- join(", ", map { "-\n\t".$_ } @{$unified_info{scripts}}) -}
{- output_off() if $disabled{makedepend}; "" -}
-DEPS={- our @deps = map { (my $x = $_) =~ s|\.o$|\$(DEP_EXT)|; $x; }
+DEPS={- our @deps = map { platform->isobj($_) ? platform->dep($_) : $_ }
grep { $unified_info{sources}->{$_}->[0] =~ /\.c$/ }
keys %{$unified_info{sources}};
join(", ", map { "-\n\t".$_ } @deps); -}
{- output_on() if $disabled{makedepend}; "" -}
GENERATED_MANDATORY={- join(", ", map { "-\n\t".$_ } @{$unified_info{depends}->{""}} ) -}
-GENERATED={- join(", ", map { "-\n\t".$_ } @generated) -}
+GENERATED={- # common0.tmpl provides @generated
+ join(", ", map { platform->convertext($_) } @generated) -}
INSTALL_LIBS={- join(", ", map { "-\n\t".$_.".OLB" } @install_libs) -}
INSTALL_SHLIBS={- join(", ", map { "-\n\t".$_.".EXE" } @install_shlibs) -}
-INSTALL_ENGINES={- join(", ", map { "-\n\t".$_.".EXE" } @{$unified_info{install}->{engines}}) -}
-INSTALL_PROGRAMS={- join(", ", map { "-\n\t".$_.".EXE" } @{$unified_info{install}->{programs}}) -}
-{- output_off() if $disabled{apps}; "" -}
-BIN_SCRIPTS=[.tools]c_rehash.pl
-MISC_SCRIPTS=[.apps]CA.pl, [.apps]tsget.pl
-{- output_on() if $disabled{apps}; "" -}
+INSTALL_ENGINES={- join(", ", map { "-\n\t".$_.".EXE" } @install_engines) -}
+INSTALL_PROGRAMS={- join(", ", map { "-\n\t".$_.".EXE" } @install_programs) -}
+BIN_SCRIPTS={- join(", ", @install_bin_scripts) -}
+MISC_SCRIPTS={- join(", ", @install_misc_scripts) -}
APPS_OPENSSL={- use File::Spec::Functions;
catfile("apps","openssl") -}
$config{prefix} ? catdir($config{prefix},"COMMON")
: "SYS\$COMMON:[OPENSSL-COMMON]" -}
# The same, but for C
-OPENSSLDIR_C={- $osslprefix -}DATAROOT:[000000]
+OPENSSLDIR_C={- platform->osslprefix() -}DATAROOT:[000000]
# Where installed engines reside, for C
-ENGINESDIR_C={- $osslprefix -}ENGINES{- $sover_dirname.$target{pointer_size} -}:
-
-CC= {- $config{cc} -}
-DEFINES={- our $defines = join(",",
- '__dummy', # To make comma processing easier
- @{$config{defines}}) -}
-CPPFLAGS={- our $cppflags = join('', @{$config{cppflags}}) -}
-CPPFLAGS_Q={- $cppflags =~ s|"|""|g; $defines =~ s|"|""|g;
- $cppflags."/DEFINE($defines)" -}
-CFLAGS={- join('', @{$config{cflags}}) -}
-LDFLAGS= {- join('', @{$config{lflags}}) -}
-EX_LIBS= {- join('', map { ','.$_ } @{$config{ex_libs}}) -}
-LIB_DEFINES={- join("",
- (map { ",$_" }
- @{$target{shared_defines}},
- 'OPENSSLDIR="""$(OPENSSLDIR_C)"""',
- 'ENGINESDIR="""$(ENGINESDIR_C)"""')) -}
-LIB_CFLAGS={- $target{lib_cflags} // "" -}
-DSO_CFLAGS={- $target{dso_cflags} // "" -}
-BIN_CFLAGS={- $target{bin_cflags} // "" -}
-NO_INST_LIB_CFLAGS={- $target{no_inst_lib_cflags} // '$(LIB_CFLAGS)' -}
-NO_INST_DSO_CFLAGS={- $target{no_inst_dso_cflags} // '$(DSO_CFLAGS)' -}
-NO_INST_BIN_CFLAGS={- $target{no_inst_bin_cflags} // '$(BIN_CFLAGS)' -}
-
-PERL={- $config{perl} -}
-
-# We let the C compiler driver to take care of .s files. This is done in
-# order to be excused from maintaining a separate set of architecture
-# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
-# gcc, then the driver will automatically translate it to -xarch=v8plus
-# and pass it down to assembler.
-AS={- $config{as} -}
-ASFLAGS={- join('', @{$config{asflags}}) -}
+ENGINESDIR_C={- platform->osslprefix() -}ENGINES{- $sover_dirname.$target{pointer_size} -}:
+
+##### User defined commands and flags ################################
+
+CC={- $config{CC} -}
+CPP={- $config{CPP} -}
+DEFINES={- our $defines1 = join('', map { ",$_" } @{$config{CPPDEFINES}}) -}
+INCLUDES={- our $includes1 = join(',', @{$config{CPPINCLUDES}}) -}
+CPPFLAGS={- our $cppflags1 = join('', @{$config{CPPFLAGS}}) -}
+CFLAGS={- join('', @{$config{CFLAGS}}) -}
+LDFLAGS={- join('', @{$config{LFLAGS}}) -}
+EX_LIBS={- join('', map { ",$_" } @{$config{LDLIBS}}) -}
+
+PERL={- $config{PERL} -}
+
+AS={- $config{AS} -}
+ASFLAGS={- join(' ', @{$config{ASFLAGS}}) -}
+
+##### Special command flags ##########################################
+
+ASOUTFLAG={- $target{asoutflag} -}$(OSSL_EMPTY)
+
+##### Project flags ##################################################
+
+# Variables starting with CNF_ are common variables for all product types
+
+CNF_ASFLAGS={- join('', $target{asflags} || (),
+ @{$config{asflags}}) -}
+CNF_DEFINES={- our $defines2 = join('', (map { ",$_" } @{$target{defines}},
+ @{$config{defines}}),
+ "'extradefines'") -}
+CNF_INCLUDES={- our $includes2 = join(',', @{$target{includes}},
+ @{$config{includes}}) -}
+CNF_CPPFLAGS={- our $cppflags2 = join('', $target{cppflags} || (),
+ @{$config{cppflags}}) -}
+CNF_CFLAGS={- join('', $target{cflags} || (),
+ @{$config{cflags}}) -}
+CNF_CXXFLAGS={- join('', $target{cxxflags} || (),
+ @{$config{cxxflags}}) -}
+CNF_LDFLAGS={- join('', $target{lflags} || (),
+ @{$config{lflags}}) -}
+CNF_EX_LIBS={- join('', map{ ",$_" } @{$target{ex_libs}},
+ @{$config{ex_libs}}) -}
+
+# Variables starting with LIB_ are used to build library object files
+# and shared libraries.
+# Variables starting with DSO_ are used to build DSOs and their object files.
+# Variables starting with BIN_ are used to build programs and their object
+# files.
+
+LIB_ASFLAGS={- join(' ', $target{lib_asflags} || (),
+ @{$config{lib_asflags}},
+ '$(CNF_ASFLAGS)', '$(ASFLAGS)') -}
+LIB_DEFINES={- our $lib_defines =
+ join('', (map { ",$_" } @{$target{lib_defines}},
+ @{$target{shared_defines}},
+ @{$config{lib_defines}},
+ @{$config{shared_defines}}));
+ join('', $lib_defines,
+ (map { ",$_" } 'OPENSSLDIR="""$(OPENSSLDIR_C)"""',
+ 'ENGINESDIR="""$(ENGINESDIR_C)"""'),
+ '$(CNF_DEFINES)', '$(DEFINES)') -}
+LIB_INCLUDES={- our $lib_includes =
+ join(',', @{$target{lib_includes}},
+ @{$target{shared_includes}},
+ @{$config{lib_includes}},
+ @{$config{shared_includes}}) -}
+LIB_CPPFLAGS={- our $lib_cppflags =
+ join('', $target{lib_cppflags} || (),
+ $target{shared_cppflags} || (),
+ @{$config{lib_cppflags}},
+ @{$config{shared_cppflag}});
+ join('', "'qual_includes'",
+ '/DEFINE=(__dummy$(LIB_DEFINES))',
+ $lib_cppflags,
+ '$(CNF_CPPFLAGS)', '$(CPPFLAGS)') -}
+LIB_CFLAGS={- join('', $target{lib_cflags} || (),
+ $target{shared_cflag} || (),
+ @{$config{lib_cflags}},
+ @{$config{shared_cflag}},
+ '$(CNF_CFLAGS)', '$(CFLAGS)') -}
+LIB_LDFLAGS={- join('', $target{lib_lflags} || (),
+ $target{shared_ldflag} || (),
+ @{$config{lib_lflags}},
+ @{$config{shared_ldflag}},
+ '$(CNF_LDFLAGS)', '$(LDFLAGS)') -}
+LIB_EX_LIBS=$(CNF_EX_LIBS)$(EX_LIBS)
+DSO_ASFLAGS={- join(' ', $target{dso_asflags} || (),
+ $target{module_asflags} || (),
+ @{$config{dso_asflags}},
+ @{$config{module_asflags}},
+ '$(CNF_ASFLAGS)', '$(ASFLAGS)') -}
+DSO_DEFINES={- join('', (map { ",$_" } @{$target{dso_defines}},
+ @{$target{module_defines}},
+ @{$config{dso_defines}},
+ @{$config{module_defines}}),
+ '$(CNF_DEFINES)', '$(DEFINES)') -}
+DSO_INCLUDES={- join(',', @{$target{dso_includes}},
+ @{$target{module_includes}},
+ @{$config{dso_includes}},
+ @{$config{module_includes}}) -}
+DSO_CPPFLAGS={- join('', "'qual_includes'",
+ '/DEFINE=(__dummy$(DSO_DEFINES))',
+ $target{dso_cppflags} || (),
+ $target{module_cppflags} || (),
+ @{$config{dso_cppflags}},
+ @{$config{module_cppflags}},
+ '$(CNF_CPPFLAGS)', '$(CPPFLAGS)') -}
+DSO_CFLAGS={- join('', $target{dso_cflags} || (),
+ $target{module_cflags} || (),
+ @{$config{dso_cflags}},
+ @{$config{module_cflags}},
+ '$(CNF_CFLAGS)', '$(CFLAGS)') -}
+DSO_LDFLAGS={- join('', $target{dso_lflags} || (),
+ $target{module_ldflags} || (),
+ @{$config{dso_lflags}},
+ @{$config{module_ldflags}},
+ '$(CNF_LDFLAGS)', '$(LDFLAGS)') -}
+DSO_EX_LIBS=$(CNF_EX_LIBS) $(EX_LIBS)
+BIN_ASFLAGS={- join(' ', $target{bin_asflags} || (),
+ @{$config{bin_asflags}},
+ '$(CNF_ASFLAGS)', '$(ASFLAGS)') -}
+BIN_DEFINES={- join('', (map { ",$_" } @{$target{bin_defines}},
+ @{$config{bin_defines}}),
+ '$(CNF_DEFINES)', '$(DEFINES)') -}
+BIN_INCLUDES={- join(',', @{$target{bin_includes}},
+ @{$config{bin_includes}}) -}
+BIN_CPPFLAGS={- join('', "'qual_includes'",
+ '/DEFINE=(__dummy$(DSO_DEFINES))',
+ $target{bin_cppflags} || (),
+ @{$config{bin_cppflag}},
+ '$(CNF_CPPFLAGS)', '$(CPPFLAGS)') -}
+BIN_CFLAGS={- join('', $target{bin_cflags} || (),
+ @{$config{bin_cflags}},
+ '$(CNF_CFLAGS)', '$(CFLAGS)') -}
+BIN_LDFLAGS={- join('', $target{bin_lflags} || (),
+ @{$config{bin_lflags}} || (),
+ '$(CNF_LDFLAGS)', '$(LDFLAGS)') -}
+BIN_EX_LIBS=$(CNF_EX_LIBS) $(EX_LIBS)
+NO_INST_LIB_CFLAGS={- join('', $target{no_inst_lib_cflags}
+ // $target{lib_cflags}
+ // (),
+ $target{shared_cflag} || (),
+ @{$config{lib_cflags}},
+ @{$config{shared_cflag}},
+ '$(CNF_CFLAGS)', '$(CFLAGS)') -}
+NO_INST_DSO_CFLAGS={- join('', $target{no_inst_dso_cflags}
+ // $target{dso_cflags}
+ // (),
+ $target{no_inst_module_cflags}
+ // $target{module_cflags}
+ // (),
+ @{$config{dso_cflags}},
+ @{$config{module_cflags}},
+ '$(CNF_CFLAGS)', '$(CFLAGS)') -}
+NO_INST_BIN_CFLAGS={- join('', $target{no_inst_bin_cflags}
+ // $target{bin_cflags}
+ // (),
+ @{$config{bin_cflags}},
+ '$(CNF_CFLAGS)', '$(CFLAGS)') -}
+
+PERLASM_SCHEME={- $target{perlasm_scheme} -}
+
+# CPPFLAGS_Q is used for one thing only: to build up buildinf.h
+CPPFLAGS_Q={- (my $c = $lib_cppflags.$cppflags2.$cppflags1) =~ s|"|""|g;
+ (my $d = $lib_defines.$defines2.$defines1) =~ s|"|""|g;
+ my $i = join(',', $lib_includes || (), $includes2 || (),
+ $includes1 || ());
+ my $x = $c;
+ $x .= "/INCLUDE=($i)" if $i;
+ $x .= "/DEFINE=($d)" if $d;
+ $x; -}
# .FIRST and .LAST are special targets with MMS and MMK.
# The defines in there are for C. includes that look like
# Convenience target to prebuild all generated files, not just the mandatory
# ones
build_all_generated : $(GENERATED_MANDATORY) $(GENERATED)
+ @ ! {- output_off() if $disabled{makedepend}; "" -}
+ @ WRITE SYS$OUTPUT "Warning: consider configuring with no-makedepend, because if"
+ @ WRITE SYS$OUTPUT " target system doesn't have $(PERL),"
+ @ WRITE SYS$OUTPUT " then make will fail..."
+ @ ! {- output_on() if $disabled{makedepend}; "" -}
test : tests
{- dependmagic('tests'); -} : build_programs_nodep, build_engines_nodep
{- join("\n\t", map { "- DELETE $_.EXE;*,$_.OPT;*" } @{$unified_info{programs}}) || "@ !" -}
{- join("\n\t", map { "- DELETE $_.EXE;*,$_.OPT;*" } @{$unified_info{engines}}) || "@ !" -}
{- join("\n\t", map { "- DELETE $_;*" } @{$unified_info{scripts}}) || "@ !" -}
+ {- join("\n\t", map { "- DELETE $_;*" } @{$unified_info{depends}->{""}}) || "@ !" -}
{- join("\n\t", map { "- DELETE $_;*" } @generated) || "@ !" -}
- DELETE [...]*.MAP;*
- DELETE [...]*.D;*
depend : descrip.mms
descrip.mms : FORCE
@ ! {- output_off() if $disabled{makedepend}; "" -}
- @ $(PERL) -pe "if (/^# DO NOT DELETE.*/) { exit(0); }" -
- < descrip.mms > descrip.mms-new
- @ OPEN/APPEND DESCRIP descrip.mms-new
- @ WRITE DESCRIP "# DO NOT DELETE THIS LINE -- make depend depends on it."
- {- join("\n\t", map { "\@ IF F\$SEARCH(\"$_\") .NES. \"\" THEN TYPE $_ /OUTPUT=DESCRIP:" } @deps); -}
- @ CLOSE DESCRIP
- @ PIPE ( $(PERL) -e "use File::Compare qw/compare_text/; my $x = compare_text(""descrip.mms"",""descrip.mms-new""); exit(0x10000000 + ($x == 0));" || -
- RENAME descrip.mms-new descrip.mms )
- @ IF F$SEARCH("descrip.mms-new") .NES. "" THEN DELETE descrip.mms-new;*
- -@ SPAWN/OUTPUT=NLA0: PURGE/NOLOG descrip.mms
+ @ $(PERL) {- sourcefile("util", "add-depends.pl") -} "VMS C"
@ ! {- output_on() if $disabled{makedepend}; "" -}
# Install helper targets #############################################
-install_sw : all install_shared _install_dev_ns -
- install_engines _install_runtime_ns -
+install_sw : install_dev install_engines install_runtime -
install_startup install_ivp
-uninstall_sw : uninstall_shared _uninstall_dev_ns -
- uninstall_engines _uninstall_runtime_ns -
+uninstall_sw : uninstall_dev uninstall_engines uninstall_runtime -
uninstall_startup uninstall_ivp
install_docs : install_html_docs
COPY/PROT=W:R {- sourcefile("apps", "ct_log_list.cnf") -} -
ossl_dataroot:[000000]ct_log_list.cnf
-install_shared : check_INSTALLTOP
- @ {- output_off() if $disabled{shared}; "" -} !
- @ WRITE SYS$OUTPUT "*** Installing shareable images"
- @ ! Install shared (runtime) libraries
- - CREATE/DIR ossl_installroot:[LIB.'arch']
- {- join("\n ",
- map { "COPY/PROT=W:R $_.EXE ossl_installroot:[LIB.'arch']" }
- @install_shlibs) -}
- @ {- output_on() if $disabled{shared}; "" -} !
-
-_install_dev_ns : check_INSTALLTOP
+install_dev : check_INSTALLTOP install_runtime_libs
@ WRITE SYS$OUTPUT "*** Installing development files"
@ ! Install header files
- CREATE/DIR ossl_installroot:[include.openssl]
map { "COPY/PROT=W:R $_.OLB ossl_installroot:[LIB.'arch']" }
@install_libs) -}
-install_dev : install_shared _install_dev_ns
+install_engines : check_INSTALLTOP install_runtime_libs build_engines
+ @ {- output_off() unless scalar @{$unified_info{engines}}; "" -} !
+ @ WRITE SYS$OUTPUT "*** Installing engines"
+ - CREATE/DIR ossl_installroot:[ENGINES{- $sover_dirname.$target{pointer_size} -}.'arch']
+ {- join("\n ",
+ map { "COPY/PROT=W:RE $_.EXE ossl_installroot:[ENGINES$sover_dirname$target{pointer_size}.'arch']" }
+ @install_engines) -}
+ @ {- output_on() unless scalar @{$unified_info{engines}}; "" -} !
+
+install_runtime : install_programs
+
+install_runtime_libs : check_INSTALLTOP build_libs
+ @ {- output_off() if $disabled{shared}; "" -} !
+ @ WRITE SYS$OUTPUT "*** Installing shareable images"
+ @ ! Install shared (runtime) libraries
+ - CREATE/DIR ossl_installroot:[LIB.'arch']
+ {- join("\n ",
+ map { "COPY/PROT=W:R $_.EXE ossl_installroot:[LIB.'arch']" }
+ @install_shlibs) -}
+ @ {- output_on() if $disabled{shared}; "" -} !
-_install_runtime_ns : check_INSTALLTOP
+install_programs : check_INSTALLTOP install_runtime_libs build_programs
+ @ {- output_off() if $disabled{apps}; "" -} !
@ ! Install the main program
- CREATE/DIR ossl_installroot:[EXE.'arch']
COPY/PROT=W:RE [.APPS]openssl.EXE -
COPY/PROT=W:RE $(BIN_SCRIPTS) ossl_installroot:[EXE]
@ ! {- output_on() if $disabled{apps}; "" -}
-install_runtime : install_shared _install_runtime_ns
-
-install_engines : check_INSTALLTOP
- @ {- output_off() unless scalar @{$unified_info{engines}}; "" -} !
- @ WRITE SYS$OUTPUT "*** Installing engines"
- - CREATE/DIR ossl_installroot:[ENGINES{- $sover_dirname.$target{pointer_size} -}.'arch']
- {- join("\n ",
- map { "COPY/PROT=W:RE $_.EXE ossl_installroot:[ENGINES$sover_dirname$target{pointer_size}.'arch']" }
- @{$unified_info{install}->{engines}}) -}
- @ {- output_on() unless scalar @{$unified_info{engines}}; "" -} !
-
install_startup : [.VMS]openssl_startup.com [.VMS]openssl_shutdown.com -
[.VMS]openssl_utils.com, check_INSTALLTOP
- CREATE/DIR ossl_installroot:[SYS$STARTUP]
WRITE CONFIG "our %config = ("
WRITE CONFIG " target => '","{- $config{target} -}","',"
WRITE CONFIG " version => '","{- $config{version} -}","',"
- WRITE CONFIG " shlib_version_number => '","{- $config{shlib_version_number} -}","',"
+ WRITE CONFIG " shlib_version => '","{- $config{shlib_version} -}","',"
WRITE CONFIG " shlib_major => '","{- $config{shlib_major} -}","',"
WRITE CONFIG " shlib_minor => '","{- $config{shlib_minor} -}","',"
WRITE CONFIG " no_shared => '","{- $disabled{shared} -}","',"
# Building targets ###################################################
configdata.pm : $(SRCDIR)Configure $(SRCDIR)config.com {- join(" ", @{$config{build_file_templates}}, @{$config{build_infos}}, @{$config{conf_files}}) -}
- perl configdata.pm -r -v
+ perl configdata.pm -r
@ WRITE SYS$OUTPUT "*************************************************"
@ WRITE SYS$OUTPUT "*** ***"
@ WRITE SYS$OUTPUT "*** Please run the same mms command again ***"
@ PIPE ( EXIT %X10000000 )
reconfigure reconf :
- perl configdata.pm -r -v
+ perl configdata.pm -r
{-
use File::Basename;
# Helper function to figure out dependencies on libraries
# It takes a list of library names and outputs a list of dependencies
sub compute_lib_depends {
- if ($disabled{shared}) {
- return map { $_ =~ /\.a$/ ? $`.".OLB" : $_.".OLB" } @_;
+ # Depending on shared libraries:
+ # On Windows POSIX layers, we depend on {libname}.dll.a
+ # On Unix platforms, we depend on {shlibname}.so
+ return map { platform->sharedlib($_) // platform->staticlib($_) } @_;
+ }
+
+ # Helper function to deal with inclusion directory specs.
+ # We have to deal with two things:
+ # 1. comma separation and no possibility of trailing comma
+ # 2. no inclusion directories given at all
+ # 3. long compiler command lines
+ # To resolve 1, we need to iterate through the sources of inclusion
+ # directories, and only add a comma when needed.
+ # To resolve 2, we need to have a variable that will hold the whole
+ # inclusion qualifier, or be the empty string if there are no inclusion
+ # directories. That's the symbol 'qual_includes' that's used in CPPFLAGS
+ # To resolve 3, we creata a logical name TMP_INCLUDES: to hold the list
+ # of inclusion directories.
+ #
+ # This function returns a list of two lists, one being the collection of
+ # commands to execute before the compiler is called, and the other being
+ # the collection of commands to execute after. It takes as arguments the
+ # collection of strings to include as directory specs.
+ sub includes {
+ my @stuff = ( @_ );
+ my @before = (
+ 'qual_includes :=',
+ );
+ my @after = (
+ 'DELETE/SYMBOL/LOCAL qual_includes',
+ );
+
+ if (scalar @stuff > 0) {
+ push @before, 'tmp_includes := '.shift(@stuff);
+ while (@stuff) {
+ push @before, 'tmp_add := '.shift(@stuff);
+ push @before, 'IF tmp_includes .NES. "" .AND. tmp_add .NES. "" THEN tmp_includes = tmp_includes + ","';
+ push @before, 'tmp_includes = tmp_includes + tmp_add';
+ }
+ push @before, "IF tmp_includes .NES. \"\" THEN DEFINE tmp_includes 'tmp_includes'";
+ push @before, 'IF tmp_includes .NES. "" THEN qual_includes := /INCLUDE=(tmp_includes:)';
+ push @before, 'DELETE/SYMBOL/LOCAL tmp_includes';
+ push @before, 'DELETE/SYMBOL/LOCAL tmp_add';
+ push @after, 'DEASSIGN tmp_includes:'
}
- return map { $_ =~ /\.a$/
- ? $`.".OLB"
- : $unified_info{sharednames}->{$_}.".EXE" } @_;
+ return ([ @before ], [ @after ]);
}
sub generatesrc {
my $generator_incs = join("", map { ' "-I'.$_.'"' } @{$args{generator_incs}});
my $deps = join(", -\n\t\t", @{$args{generator_deps}}, @{$args{deps}});
- if ($args{src} !~ /\.[sS]$/) {
+ if (platform->isdef($args{src})) {
+ my $target = platform->def($args{src});
+ my $mkdef = sourcefile('util', 'mkdef.pl');
+ my $ord_ver = $args{intent} eq 'lib' ? ' --version $(VERSION)' : '';
+ my $ord_name =
+ $args{generator}->[1] || basename($args{product}, '.EXE');
+ my $case_insensitive =
+ $target{$args{intent}.'_cflags'} =~ m|/NAMES=[^/]*AS_IS|i
+ ? '' : ' --case-insensitive';
+ return <<"EOF";
+$target : $args{generator}->[0] $deps $mkdef
+ \$(PERL) $mkdef$ord_ver --ordinals $args{generator}->[0] --name $ord_name "--OS" "VMS"$case_insensitive > $target
+EOF
+ } elsif (!platform->isasm($args{src})) {
+ my $target = $args{src};
if ($args{generator}->[0] =~ m|^.*\.in$|) {
my $dofile = abs2rel(rel2abs(catfile($config{sourcedir},
"util", "dofile.pl")),
rel2abs($config{builddir}));
return <<"EOF";
-$args{src} : $args{generator}->[0] $deps
+$target : $args{generator}->[0] $deps
\$(PERL) "-I\$(BLDDIR)" "-Mconfigdata" $dofile \\
- "-o$target{build_file}" $generator > \$@
+ "-o$target{build_file}" $generator > \$\@
EOF
} else {
return <<"EOF";
-$args{src} : $args{generator}->[0] $deps
- \$(PERL)$generator_incs $generator > \$@
+$target : $args{generator}->[0] $deps
+ \$(PERL)$generator_incs $generator > \$\@
EOF
}
} else {
- die "No method to generate assembler source present.\n";
+ my $target = platform->asm($args{src});
+ if ($args{generator}->[0] =~ /\.pl$/) {
+ $generator = '$(PERL)'.$generator_incs.' '.$generator;
+ } elsif ($args{generator}->[0] =~ /\.S$/) {
+ $generator = undef;
+ } else {
+ die "Generator type for $src unknown: $generator\n";
+ }
+
+ my $cppflags = {
+ shlib => '$(LIB_CFLAGS) $(LIB_CPPFLAGS)',
+ lib => '$(LIB_CFLAGS) $(LIB_CPPFLAGS)',
+ dso => '$(DSO_CFLAGS) $(DSO_CPPFLAGS)',
+ bin => '$(BIN_CFLAGS) $(BIN_CPPFLAGS)'
+ } -> {$args{intent}};
+ my @incs_cmds = includes({ shlib => '$(LIB_INCLUDES)',
+ lib => '$(LIB_INCLUDES)',
+ dso => '$(DSO_INCLUDES)',
+ bin => '$(BIN_INCLUDES)' } -> {$args{intent}},
+ '$(CNF_INCLUDES)',
+ '$(INCLUDES)',
+ @{$args{incs}});
+ my $incs_on = join("\n\t\@ ", @{$incs_cmds[0]}) || '!';
+ my $incs_off = join("\n\t\@ ", @{$incs_cmds[1]}) || '!';
+ my $defs = join("", map { ",".$_ } @{$args{defs}});
+ if (defined($generator)) {
+ # If the target is named foo.S in build.info, we want to
+ # end up generating foo.s in two steps.
+ if ($args{src} =~ /\.S$/) {
+ return <<"EOF";
+$target : $args{generator}->[0] $deps
+ $generator \$\@-S
+ \@ $incs_on
+ \@ extradefines = "$defs"
+ PIPE \$(CPP) $cppflags \$\@-S | -
+ \$(PERL) -ne "/^#(\\s*line)?\\s*[0-9]+\\s+""/ or print" > \$\@-i
+ \@ DELETE/SYMBOL/LOCAL extradefines
+ \@ $incs_off
+ RENAME \$\@-i \$\@
+ DELETE \$\@-S;
+EOF
+ }
+ # Otherwise....
+ return <<"EOF";
+$target : $args{generator}->[0] $deps
+ $generator \$\@
+EOF
+ }
+ return <<"EOF";
+$target : $args{generator}->[0] $deps
+ \@ $incs_on
+ \@ extradefines = "$defs"
+ SHOW SYMBOL qual_includes
+ PIPE \$(CPP) $cppflags $args{generator}->[0] | -
+ \$(PERL) "-ne" "/^#(\\s*line)?\\s*[0-9]+\\s+""/ or print" > \$\@
+ \@ DELETE/SYMBOL/LOCAL extradefines
+ \@ $incs_off
+EOF
}
}
sub src2obj {
my %args = @_;
- (my $obj = $args{obj}) =~ s|\.o$||;
- my $deps = join(", -\n\t\t", @{$args{srcs}}, @{$args{deps}});
+ my @srcs = map { (my $x = $_) =~ s/\.s$/.asm/; $x } ( @{$args{srcs}} );
+ my $obj = platform->obj($args{obj});
+ my $deps = join(", -\n\t\t", @srcs, @{$args{deps}});
# Because VMS C isn't very good at combining a /INCLUDE path with
# #includes having a relative directory (like '#include "../foo.h"),
my $forward = dirname($args{srcs}->[0]);
my $backward = abs2rel(rel2abs("."), rel2abs($forward));
my $objd = abs2rel(rel2abs(dirname($obj)), rel2abs($forward));
- my $objn = basename($obj);
+ my $objn = basename($obj, platform->objext());
my $srcs =
- join(", ",
- map { abs2rel(rel2abs($_), rel2abs($forward)) } @{$args{srcs}});
- my $cflags = '$(CFLAGS)';
- if ($args{installed}) {
- $cflags .= { lib => '$(LIB_CFLAGS)',
- dso => '$(DSO_CFLAGS)',
- bin => '$(BIN_CFLAGS)' } -> {$args{intent}};
+ join(", ", map { abs2rel(rel2abs($_), rel2abs($forward)) } @srcs);
+ my $before = $unified_info{before}->{$obj} || "\@ !";
+ my $after = $unified_info{after}->{$obj} || "\@ !";
+
+ if ($srcs[0] =~ /\.asm$/) {
+ my $asflags = { shlib => ' $(LIB_ASFLAGS)',
+ lib => ' $(LIB_ASFLAGS)',
+ dso => ' $(DSO_ASFLAGS)',
+ bin => ' $(BIN_ASFLAGS)' } -> {$args{intent}};
+ return <<"EOF";
+$obj : $deps
+ ${before}
+ SET DEFAULT $forward
+ \$(AS) $asflags \$(ASOUTFLAG)${objd}${objn}.OBJ $srcs
+ SET DEFAULT $backward
+EOF
+ }
+
+ my $cflags;
+ if ($args{attrs}->{noinst}) {
+ $cflags = { shlib => '$(NO_INST_LIB_CFLAGS)',
+ lib => '$(NO_INST_LIB_CFLAGS)',
+ dso => '$(NO_INST_DSO_CFLAGS)',
+ bin => '$(NO_INST_BIN_CFLAGS)' } -> {$args{intent}};
} else {
- $cflags .= { lib => '$(NO_INST_LIB_CFLAGS)',
- dso => '$(NO_INST_DSO_CFLAGS)',
- bin => '$(NO_INST_BIN_CFLAGS)' } -> {$args{intent}};
+ $cflags = { shlib => '$(LIB_CFLAGS)',
+ lib => '$(LIB_CFLAGS)',
+ dso => '$(DSO_CFLAGS)',
+ bin => '$(BIN_CFLAGS)' } -> {$args{intent}};
}
- $cflags .= '$(CPPFLAGS)';
- $cflags .= { lib => '$(LIB_CPPFLAGS)',
+ $cflags .= { shlib => '$(LIB_CPPFLAGS)',
+ lib => '$(LIB_CPPFLAGS)',
dso => '$(DSO_CPPFLAGS)',
bin => '$(BIN_CPPFLAGS)' } -> {$args{intent}};
- my $defines = '$(DEFINES)';
- $defines .= { lib => '$(LIB_DEFINES)',
- dso => '$(DSO_DEFINES)',
- bin => '$(BIN_DEFINES)' } -> {$args{intent}};
- $cflags .= '/DEFINE=('.$defines.')';
-
- my $incs_on = "\@ !";
- my $incs_off = "\@ !";
- my $incs = "";
- my @incs = ();
- push @incs, @{$args{incs}} if @{$args{incs}};
- unless ($disabled{zlib}) {
- # GNV$ZLIB_INCLUDE is the standard logical name for later zlib
- # incarnations.
- push @incs, ($withargs{zlib_include} || 'GNV$ZLIB_INCLUDE:');
- }
- if (@incs) {
- $incs_on =
- "DEFINE tmp_includes "
- .join(",-\n\t\t\t", map {
- file_name_is_absolute($_)
- ? $_ : catdir($backward,$_)
- } @incs);
- $incs_off = "DEASSIGN tmp_includes";
- $incs = " /INCLUDE=(tmp_includes:)";
- }
- my $before = $unified_info{before}->{$obj.".OBJ"} || "\@ !";
- my $after = $unified_info{after}->{$obj.".OBJ"} || "\@ !";
- my $depbuild = $disabled{makedepend} ? ""
- : " /MMS=(FILE=${objd}${objn}.tmp-D,TARGET=$obj.OBJ)";
-
- return <<"EOF"
+ my $defs = join("", map { ",".$_ } @{$args{defs}});
+ my $asflags = { shlib => ' $(LIB_ASFLAGS)',
+ lib => ' $(LIB_ASFLAGS)',
+ dso => ' $(DSO_ASFLAGS)',
+ bin => ' $(BIN_ASFLAGS)' } -> {$args{intent}};
+
+ my @incs_cmds = includes({ shlib => '$(LIB_INCLUDES)',
+ lib => '$(LIB_INCLUDES)',
+ dso => '$(DSO_INCLUDES)',
+ bin => '$(BIN_INCLUDES)' } -> {$args{intent}},
+ '$(INCLUDES)',
+ map {
+ file_name_is_absolute($_)
+ ? $_ : catdir($backward,$_)
+ } @{$args{incs}});
+ my $incs_on = join("\n\t\@ ", @{$incs_cmds[0]}) || '!';
+ my $incs_off = join("\n\t\@ ", @{$incs_cmds[1]}) || '!';
+
+ if ($srcs[0] =~ /\.asm$/) {
+ return <<"EOF";
$obj.OBJ : $deps
${before}
SET DEFAULT $forward
- $incs_on
- \$(CC) ${cflags}${incs}${depbuild} /OBJECT=${objd}${objn}.OBJ /REPOSITORY=$backward $srcs
- $incs_off
+ \$(AS) $asflags \$(ASOUTFLAG)${objd}${objn}.OBJ $srcs
SET DEFAULT $backward
${after}
- PURGE $obj.OBJ
EOF
- . ($disabled{makedepend} ? "" : <<"EOF"
- \@ PIPE ( \$(PERL) -e "use File::Compare qw/compare_text/; my \$x = compare_text(""$obj.D"",""$obj.tmp-D""); exit(0x10000000 + (\$x == 0));" || -
- RENAME $obj.tmp-D $obj.d )
- \@ IF F\$SEARCH("$obj.tmp-D") .NES. "" THEN DELETE $obj.tmp-D;*
+ } elsif ($srcs[0] =~ /.S$/) {
+ return <<"EOF";
+$obj.OBJ : $deps
+ ${before}
+ SET DEFAULT $forward
+ \@ $incs_on
+ \@ extradefines = "$defs"
+ PIPE \$(CPP) ${cflags} $srcs | -
+ \$(PERL) -ne "/^#(\\s*line)?\\s*[0-9]+\\s+""/ or print" -
+ > ${objd}${objn}.asm
+ \@ DELETE/SYMBOL/LOCAL extradefines
+ \@ $incs_off
+ SET DEFAULT $backward
+ ${after}
+ \$(AS) $asflags \$(ASOUTFLAG)$obj.OBJ $obj.asm
+ - PURGE $obj.OBJ
+EOF
+ }
+
+ my $depbuild = $disabled{makedepend} ? ""
+ : " /MMS=(FILE=${objd}${objn}.D,TARGET=$obj)";
+
+ return <<"EOF";
+$obj : $deps
+ ${before}
+ SET DEFAULT $forward
+ \@ $incs_on
+ \@ extradefines = "$defs"
+ \$(CC) ${cflags}${depbuild} /OBJECT=${objd}${objn}.OBJ /REPOSITORY=$backward $srcs
+ \@ DELETE/SYMBOL/LOCAL extradefines
+ \@ $incs_off
+ SET DEFAULT $backward
+ ${after}
+ - PURGE $obj
EOF
- );
}
- sub libobj2shlib {
+ sub obj2shlib {
my %args = @_;
- my $lib = $args{lib};
- my $shlib = $args{shlib};
- my $libd = dirname($lib);
- my $libn = basename($lib);
- my @objs = map { (my $x = $_) =~ s|\.o$|.OBJ|; $x }
- grep { $_ =~ m|\.o$| }
+ my $shlibname = platform->sharedname($args{lib});
+ my $shlib = platform->sharedlib($args{lib});
+ my @objs = map { platform->convertext($_) }
+ grep { platform->isobj($_) }
+ @{$args{objs}};
+ my @defs = map { platform->convertext($_) }
+ grep { platform->isdef($_) }
@{$args{objs}};
- my @defs = grep { $_ =~ /\.opt$/ } @{$args{objs}};
my @deps = compute_lib_depends(@{$args{deps}});
die "More than one symbol vector" if scalar @defs > 1;
- my $deps = join(", -\n\t\t", @defs, @deps);
+ my $deps = join(", -\n\t\t", @objs, @defs, @deps);
my $shlib_target = $disabled{shared} ? "" : $target{shared_target};
my $translatesyms_pl = abs2rel(rel2abs(catfile($config{sourcedir},
"VMS", "translatesyms.pl")),
"WRITE OPT_FILE \"$x\"" } @deps)
|| "\@ !";
return <<"EOF"
-$shlib.EXE : $lib.OLB $deps
+$shlib : $deps
\$(PERL) $translatesyms_pl \$(BLDDIR)CXX\$DEMANGLER_DB. < $defs[0] > $defs[0]-translated
- OPEN/WRITE/SHARE=READ OPT_FILE $lib-components.OPT
+ OPEN/WRITE/SHARE=READ OPT_FILE $shlibname-components.OPT
$write_opt1
$write_opt2
CLOSE OPT_FILE
- LINK \$(LDFLAGS)/SHARE=\$\@ $defs[0]-translated/OPT,-
- $lib-components.OPT/OPT \$(EX_LIBS)
- DELETE $defs[0]-translated;*,$lib-components.OPT;*
- PURGE $shlib.EXE,$shlib.MAP
+ LINK \$(LIB_LDFLAGS)/SHARE=\$\@ $defs[0]-translated/OPT,-
+ $shlibname-components.OPT/OPT \$(LIB_EX_LIBS)
+ DELETE $defs[0]-translated;*,$shlibname-components.OPT;*
+ PURGE $shlibname.EXE,$shlibname.MAP
EOF
. ($config{target} =~ m|alpha| ? "" : <<"EOF"
SET IMAGE/FLAGS=(NOCALL_DEBUG) \$\@
}
sub obj2dso {
my %args = @_;
- my $lib = $args{lib};
- my $libd = dirname($lib);
- my $libn = basename($lib);
- (my $libn_nolib = $libn) =~ s/^lib//;
- my @objs = map { (my $x = $_) =~ s|\.o$|.OBJ|; $x } @{$args{objs}};
+ my $dsoname = platform->dsoname($args{lib});
+ my $dso = platform->dso($args{lib});
+ my @objs = map { platform->convertext($_) }
+ grep { platform->isobj($_) }
+ @{$args{objs}};
+ my @defs = map { platform->convertext($_) }
+ grep { platform->isdef($_) }
+ @{$args{objs}};
my @deps = compute_lib_depends(@{$args{deps}});
- my $deps = join(", -\n\t\t", @objs, @deps);
+ my $deps = join(", -\n\t\t", @objs, @defs, @deps);
+ die "More than one symbol vector" if scalar @defs > 1;
my $shlib_target = $disabled{shared} ? "" : $target{shared_target};
- my $engine_opt = abs2rel(rel2abs(catfile($config{sourcedir},
- "VMS", "engine.opt")),
- rel2abs($config{builddir}));
# The "[]" hack is because in .OPT files, each line inherits the
# previous line's file spec as default, so if no directory spec
# is present in the current line and the previous line has one that
"WRITE OPT_FILE \"$x\"" } @deps)
|| "\@ !";
return <<"EOF"
-$lib.EXE : $deps
- OPEN/WRITE/SHARE=READ OPT_FILE $lib.OPT
- TYPE $engine_opt /OUTPUT=OPT_FILE:
+$dso : $deps
+ OPEN/WRITE/SHARE=READ OPT_FILE $dsoname-components.OPT
$write_opt1
$write_opt2
CLOSE OPT_FILE
- LINK \$(LDFLAGS)/SHARE=\$\@ $lib.OPT/OPT \$(EX_LIBS)
- - PURGE $lib.EXE,$lib.OPT,$lib.MAP
+ LINK \$(DSO_LDFLAGS)/SHARE=\$\@ $defs[0]/OPT,-
+ $dsoname-components.OPT/OPT \$(DSO_EX_LIBS)
+ - PURGE $dsoname.EXE,$dsoname.OPT,$dsoname.MAP
EOF
. ($config{target} =~ m|alpha| ? "" : <<"EOF"
SET IMAGE/FLAGS=(NOCALL_DEBUG) \$\@
}
sub obj2lib {
my %args = @_;
- (my $lib = $args{lib}) =~ s/\.a$//;
- my @objs = map { (my $x = $_) =~ s|\.o$|.OBJ|; $x } @{$args{objs}};
+ my $lib = platform->staticlib($args{lib});
+ my @objs = map { platform->convertext($_) }
+ grep { platform->isobj($_) }
+ @{$args{objs}};
my $objs = join(", -\n\t\t", @objs);
- my $fill_lib = join("\n\t", (map { "LIBRARY/REPLACE $lib.OLB $_" }
- @objs));
+ my $fill_lib = join("\n\t", (map { "LIBRARY/REPLACE $lib $_" } @objs));
return <<"EOF";
-$lib.OLB : $objs
- LIBRARY/CREATE/OBJECT $lib.OLB
+$lib : $objs
+ LIBRARY/CREATE/OBJECT $lib
$fill_lib
- - PURGE $lib.OLB
+ - PURGE $lib
EOF
}
sub obj2bin {
my %args = @_;
- my $bin = $args{bin};
- my $bind = dirname($bin);
- my $binn = basename($bin);
- my @objs = map { (my $x = $_) =~ s|\.o$|.OBJ|; $x } @{$args{objs}};
+ my $bin = platform->bin($args{bin});
+ my $binname = platform->binname($args{bin});
+ my @objs = map { platform->convertext($_) }
+ grep { platform->isobj($_) }
+ @{$args{objs}};
my $objs = join(",", @objs);
my @deps = compute_lib_depends(@{$args{deps}});
my $deps = join(", -\n\t\t", @objs, @deps);
"\@ WRITE OPT_FILE \"$x" } @objs).
"\"";
my $write_opt2 =
- join("\n\t", map { my @lines = ();
+ join("\n\t", map { my @lines = (
+ "\ WRITE OPT_FILE \"CASE_SENSITIVE=YES\""
+ );
my $x = $_ =~ /\[/ ? $_ : "[]".$_;
if ($x =~ m|\.EXE$|) {
push @lines, "\@ WRITE OPT_FILE \"$x/SHARE\"";
# isn't necessary. If there are other warnings, however, we show them
# and let it break the build.
return <<"EOF"
-$bin.EXE : $deps
+$bin : $deps
$analyse_objs
- @ OPEN/WRITE/SHARE=READ OPT_FILE $bin.OPT
+ @ OPEN/WRITE/SHARE=READ OPT_FILE $binname.OPT
$write_opt1
$write_opt2
@ CLOSE OPT_FILE
- TYPE $bin.opt ! For debugging
- - pipe SPAWN/WAIT/NOLOG/OUT=$bin.LINKLOG -
- LINK \$(LDFLAGS)/EXEC=\$\@ $bin.OPT/OPT \$(EX_LIBS) ; -
+ TYPE $binname.OPT ! For debugging
+ - pipe SPAWN/WAIT/NOLOG/OUT=$binname.LINKLOG -
+ LINK \$(BIN_LDFLAGS)/EXEC=\$\@ $binname.OPT/OPT \$(BIN_EX_LIBS) ; -
link_status = \$status ; link_severity = link_status .AND. 7
@ search_severity = 1
-@ IF link_severity .EQ. 0 THEN -
- pipe SEARCH $bin.LINKLOG "%","-"/MATCH=AND | -
+ pipe SEARCH $binname.LINKLOG "%","-"/MATCH=AND | -
SPAWN/WAIT/NOLOG/OUT=NLA0: -
SEARCH SYS\$INPUT: "-W-MULDEF,"/MATCH=NOR ; -
search_severity = \$severity
@ IF search_severity .EQ. 3 THEN link_severity = 1
@ ! At this point, if link_severity shows that there was a fault
@ ! or warning, make sure to restore the linking status.
- -@ IF .NOT. link_severity THEN TYPE $bin.LINKLOG
- -@ DELETE $bin.LINKLOG;*
+ -@ IF .NOT. link_severity THEN TYPE $binname.LINKLOG
+ -@ DELETE $binname.LINKLOG;*
@ IF .NOT. link_severity THEN SPAWN/WAIT/NOLOG EXIT 'link_status'
- - PURGE $bin.EXE,$bin.OPT
+ - PURGE $bin,$binname.OPT
EOF
. ($config{target} =~ m|alpha| ? "" : <<"EOF"
SET IMAGE/FLAGS=(NOCALL_DEBUG) \$\@