+Intro
+=====
+
+This directory contains a few sets of files that are used for
+configuration in diverse ways:
+
+ *.conf Target platform configurations, please read
+ 'Configurations of OpenSSL target platforms' for more
+ information.
+ *.tmpl Build file templates, please read 'Build-file
+ programming with the "unified" build system' as well
+ as 'Build info files' for more information.
+ *.pm Helper scripts / modules for the main `Configure`
+ script. See 'Configure helper scripts for more
+ information.
+
+
Configurations of OpenSSL target platforms
==========================================
sys_id => System identity for systems where that
is difficult to determine automatically.
+ enable => Enable specific configuration features.
+ This MUST be an array of words.
+ disable => Disable specific configuration features.
+ This MUST be an array of words.
+ Note: if the same feature is both enabled
+ and disabled, disable wins.
+
cc => The C compiler command, usually one of "cc",
"gcc" or "clang". This command is normally
also used to link object files and
files. On unix, this defaults to "" (NOTE:
this is here for future use, it's not
implemented yet)
+ shlib_variant => A "variant" identifier inserted between the base
+ shared library name and the extension. On "unixy"
+ platforms (BSD, Linux, Solaris, MacOS/X, ...) this
+ supports installation of custom OpenSSL libraries
+ that don't conflict with other builds of OpenSSL
+ installed on the system. The variant identifier
+ becomes part of the SONAME of the library and also
+ any symbol versions (symbol versions are not used or
+ needed with MacOS/X). For example, on a system
+ where a default build would normally create the SSL
+ shared library as 'libssl.so -> libssl.so.1.1' with
+ the value of the symlink as the SONAME, a target
+ definition that sets 'shlib_variant => "-abc"' will
+ create 'libssl.so -> libssl-abc.so.1.1', again with
+ an SONAME equal to the value of the symlink. The
+ symbol versions associated with the variant library
+ would then be 'OPENSSL_ABC_<version>' rather than
+ the default 'OPENSSL_<version>'. The string inserted
+ into symbol versions is obtained by mapping all
+ letters in the "variant" identifier to upper case
+ and all non-alphanumeric characters to '_'.
thread_scheme => The type of threads is used on the
configured platform. Currently known
to have the different variants in different
directories.
- bn_ops => Building options (was just bignum options
- in the earlier history of this option,
- hence the name). This a string of words
- that describe properties on the designated
- target platform, such as the type of
- integers used to build up the bitnum,
- different ways to implement certain ciphers
- and so on. To fully comprehend the
+ bn_ops => Building options (was just bignum options in
+ the earlier history of this option, hence the
+ name). This is a string of words that describe
+ algorithms' implementation parameters that
+ are optimal for the designated target platform,
+ such as the type of integers used to build up
+ the bignum, different ways to implement certain
+ ciphers and so on. To fully comprehend the
meaning, the best is to read the affected
source.
The valid words are:
- BN_LLONG use 'unsigned long long' in
- some bignum calculations.
- This has no value when
- SIXTY_FOUR_BIT or
- SIXTY_FOUR_BIT_LONG is given.
- RC4_CHAR makes the basic RC4 unit of
- calculation an unsigned char.
- SIXTY_FOUR_BIT processor registers
- are 64 bits, long is
- 32 bits, long long is
- 64 bits.
- SIXTY_FOUR_BIT_LONG processor registers
- are 64 bits, long is
- 64 bits.
- THIRTY_TWO_BIT processor registers
- are 32 bits.
+ THIRTY_TWO_BIT bignum limbs are 32 bits,
+ this is default if no
+ option is specified, it
+ works on any supported
+ system [unless "wider"
+ limb size is implied in
+ assembly code];
+ BN_LLONG bignum limbs are 32 bits,
+ but 64-bit 'unsigned long
+ long' is used internally
+ in calculations;
+ SIXTY_FOUR_BIT_LONG bignum limbs are 64 bits
+ and sizeof(long) is 8;
+ SIXTY_FOUR_BIT bignums limbs are 64 bits,
+ but execution environment
+ is ILP32;
+ RC4_CHAR RC4 key schedule is made
+ up of 'unsigned char's;
+ RC4_INT RC4 key schedule is made
+ up of 'unsigned int's;
EXPORT_VAR_AS_FN for shared libraries,
export vars as
accessor functions.
to be located in the source tree while files given through DEPEND are
expected to be located in the build tree)
-For some libraries, we maintain files with public symbols and their
-slot in a transfer vector (important on some platforms). It can be
-declared like this:
+It's also possible to depend on static libraries explicitly:
- ORDINALS[libcrypto]=crypto
+ DEPEND[foo]=libsomething.a
+ DEPEND[libbar]=libsomethingelse.a
-The value is not the name of the file in question, but rather the
-argument to util/mkdef.pl that indicates which file to use.
+This should be rarely used, and care should be taken to make sure it's
+only used when supported. For example, native Windows build doesn't
+support build static libraries and DLLs at the same time, so using
+static libraries on Windows can only be done when configured
+'no-shared'.
One some platforms, shared libraries come with a name that's different
from their static counterpart. That's declared as follows:
GENERATE[bar.s]=asm/bar.S
The value of each GENERATE line is a command line or part of it.
-Configure places no rules on the command line, except the the first
-item muct be the generator file. It is, however, entirely up to the
+Configure places no rules on the command line, except that the first
+item must be the generator file. It is, however, entirely up to the
build file template to define exactly how those command lines should
be handled, how the output is captured and so on.
libobj2shlib(shlib => "PATH/TO/shlibfile",
lib => "PATH/TO/libfile",
objs => [ "PATH/TO/objectfile", ... ],
- deps => [ "PATH/TO/otherlibfile", ... ],
- ordinals => [ "word", "/PATH/TO/ordfile" ]);
+ deps => [ "PATH/TO/otherlibfile", ... ]);
'lib' has the intended library file name *without*
extension, libobj2shlib is expected to add that.
libraries (also *without* extension) this library
needs to be linked with. 'objs' has the list of
object files (also *without* extension) to build
- this library. 'ordinals' MAY be present, and when
- it is, its value is an array where the word is
- "crypto" or "ssl" and the file is one of the ordinal
- files util/libeay.num or util/ssleay.num in the
- source directory.
+ this library.
This function has a choice; it can use the
corresponding static library as input to make the
""; # Make sure no lingering values end up in the Makefile
-}
+
+
+Configure helper scripts
+========================
+
+Configure uses helper scripts in this directory:
+
+Checker scripts
+---------------
+
+These scripts are per platform family, to check the integrity of the
+tools used for configuration and building. The checker script used is
+either {build_platform}-{build_file}-checker.pm or
+{build_platform}-checker.pm, where {build_platform} is the second
+'build_scheme' list element from the configuration target data, and
+{build_file} is 'build_file' from the same target data.
+
+If the check succeeds, the script is expected to end with a non-zero
+expression. If the check fails, the script can end with a zero, or
+with a `die`.