Select this only if you plan to use busybox on full-blown
desktop machine with common Linux distro, not on an embedded box.
-config FEATURE_ASSUME_UNICODE
- bool "Assume that 1:1 char/glyph correspondence is not true"
+config EXTRA_COMPAT
+ bool "Provide compatible behavior for rare corner cases (bigger code)"
default n
help
- This makes various applets aware that one byte is not
- one character on screen.
+ This option makes grep, sed etc handle rare corner cases
+ (embedded NUL bytes and such). This makes code bigger and uses
+ some GNU extensions in libc. You probably only need this option
+ if you plan to run busybox on desktop.
- Busybox aims to eventually work correctly with Unicode displays.
- Any older encodings are not guaranteed to work.
- Probably by the time when busybox will be fully Unicode-clean,
- other encodings will be mainly of historic interest.
+config INCLUDE_SUSv2
+ bool "Enable obsolete features removed before SUSv3"
+ default y
+ help
+ This option will enable backwards compatibility with SuSv2,
+ specifically, old-style numeric options ('command -1 <file>')
+ will be supported in head, tail, and fold. (Note: should
+ affect renice too.)
+
+config USE_PORTABLE_CODE
+ bool "Avoid using GCC-specific code constructs"
+ default n
+ help
+ Use this option if you are trying to compile busybox with
+ compiler other than gcc.
+ If you do use gcc, this option may needlessly increase code size.
choice
prompt "Buffer allocation policy"
There are 3 ways BusyBox can handle buffer allocations:
- Use malloc. This costs code size for the call to xmalloc.
- Put them on stack. For some very small machines with limited stack
- space, this can be deadly. For most folks, this works just fine.
+ space, this can be deadly. For most folks, this works just fine.
- Put them in BSS. This works beautifully for computers with a real
MMU (and OS support), but wastes runtime RAM for uCLinux. This
behavior was the only one available for BusyBox versions 0.48 and
config FEATURE_VERBOSE_USAGE
bool "Show verbose applet usage messages"
- default n
- select SHOW_USAGE
+ default y
+ depends on SHOW_USAGE
help
All BusyBox applets will show more verbose help messages when
- busybox is invoked with --help. This will add a lot of text to the
- busybox binary. In the default configuration, this will add about
+ busybox is invoked with --help. This will add a lot of text to the
+ busybox binary. In the default configuration, this will add about
13k, but it can add much more depending on your configuration.
config FEATURE_COMPRESS_USAGE
If you have a really tiny busybox with few applets enabled (and
bunzip2 isn't one of them), the overhead of the decompressor might
- be noticeable. Also, if you run executables directly from ROM
- and have very little memory, this might not be a win. Otherwise,
+ be noticeable. Also, if you run executables directly from ROM
+ and have very little memory, this might not be a win. Otherwise,
you probably want this.
config FEATURE_INSTALLER
bool "Support --install [-s] to install applet links at runtime"
- default n
+ default y
help
- Enable 'busybox --install [-s]' support. This will allow you to use
+ Enable 'busybox --install [-s]' support. This will allow you to use
busybox at runtime to create hard links or symlinks for all the
applets that are compiled into busybox.
Enable this if your system has locale support and you would like
busybox to support locale settings.
-config GETOPT_LONG
+config UNICODE_SUPPORT
+ bool "Support Unicode"
+ default y
+ help
+ This makes various applets aware that one byte is not
+ one character on screen.
+
+ Busybox aims to eventually work correctly with Unicode displays.
+ Any older encodings are not guaranteed to work.
+ Probably by the time when busybox will be fully Unicode-clean,
+ other encodings will be mainly of historic interest.
+
+config UNICODE_USING_LOCALE
+ bool "Use libc routines for Unicode (else uses internal ones)"
+ default n
+ depends on UNICODE_SUPPORT && LOCALE_SUPPORT
+ help
+ With this option on, Unicode support is implemented using libc
+ routines. Otherwise, internal implementation is used.
+
+config FEATURE_CHECK_UNICODE_IN_ENV
+ bool "Check $LANG environment variable"
+ default n
+ depends on UNICODE_SUPPORT && !UNICODE_USING_LOCALE
+ help
+ With this option on, Unicode support is activated
+ only if LANG variable has the value of the form "xxxx.utf8"
+
+ Otherwise, Unicode support will be always enabled and active.
+
+config SUBST_WCHAR
+ int "Character code to substitute unprintable characters with"
+ depends on UNICODE_SUPPORT
+ default 63
+ help
+ Typical values are 63 for '?' (works with any output device),
+ 30 for ASCII substitute control code,
+ 65533 (0xfffd) for Unicode replacement character.
+
+config LAST_SUPPORTED_WCHAR
+ int "Range of supported Unicode characters"
+ depends on UNICODE_SUPPORT
+ default 767
+ help
+ Any character with Unicode value bigger than this is assumed
+ to be non-printable on output device. Many applets replace
+ such chars with substitution character.
+
+ The idea is that many valid printable Unicode chars are
+ nevertheless are not displayed correctly. Think about
+ combining charachers, double-wide hieroglyphs, obscure
+ characters in dozens of ancient scripts...
+ Many terminals, terminal emulators, xterms etc will fail
+ to handle them correctly. Choose the smallest value
+ which suits your needs.
+
+ Typical values are:
+ 126 - ASCII only
+ 767 (0x2ff) - there are no combining chars in [0..767] range
+ (the range includes Latin 1, Latin Ext. A and B),
+ code is ~700 bytes smaller for this case.
+ 4351 (0x10ff) - there are no double-wide chars in [0..4351] range,
+ code is ~300 bytes smaller for this case.
+ 12799 (0x31ff) - nearly all non-ideographic characters are
+ available in [0..12799] range, including
+ East Asian scripts like katakana, hiragana, hangul,
+ bopomofo...
+ 0 - off, any valid printable Unicode character will be printed.
+
+config UNICODE_COMBINING_WCHARS
+ bool "Allow zero-width Unicode characters on output"
+ default n
+ depends on UNICODE_SUPPORT
+ help
+ With this option off, any Unicode char with width of 0
+ is substituted on output.
+
+config UNICODE_WIDE_WCHARS
+ bool "Allow wide Unicode characters on output"
+ default n
+ depends on UNICODE_SUPPORT
+ help
+ With this option off, any Unicode char with width > 1
+ is substituted on output.
+
+config UNICODE_BIDI_SUPPORT
+ bool "Bidirectional character-aware line input"
+ default n
+ depends on UNICODE_SUPPORT && !UNICODE_USING_LOCALE
+ help
+ With this option on, right-to-left Unicode characters
+ are treated differently on input (e.g. cursor movement).
+
+config UNICODE_NEUTRAL_TABLE
+ bool "In bidi input, support non-ASCII neutral chars too"
+ default n
+ depends on UNICODE_BIDI_SUPPORT
+ help
+ In most cases it's enough to treat only ASCII non-letters
+ (i.e. punctuation, numbers and space) as characters
+ with neutral directionality.
+ With this option on, more extensive (and bigger) table
+ of neutral chars will be used.
+
+config UNICODE_PRESERVE_BROKEN
+ bool "Make it possible to enter sequences of chars which are not Unicode"
+ default n
+ depends on UNICODE_SUPPORT
+ help
+ With this option on, invalid UTF-8 bytes are not substituted
+ with the selected substitution character.
+ For example, this means that entering 'l', 's', ' ', 0xff, [Enter]
+ at shell prompt will list file named 0xff (single char name
+ with char value 255), not file named '?'.
+
+config LONG_OPTS
bool "Support for --long-options"
default y
help
help
Enable if you want BusyBox to use Unix98 PTY support. If enabled,
busybox will use /dev/ptmx for the master side of the pseudoterminal
- and /dev/pts/<number> for the slave side. Otherwise, BSD style
+ and /dev/pts/<number> for the slave side. Otherwise, BSD style
/dev/ttyp<number> will be used. To use this option, you should have
devpts mounted.
default n
help
As a size optimization, busybox normally exits without explicitly
- freeing dynamically allocated memory or closing files. This saves
+ freeing dynamically allocated memory or closing files. This saves
space since the OS will clean up for us, but it can confuse debuggers
like valgrind, which report tons of memory and resource leaks.
Don't enable this unless you have a really good reason to clean
things up manually.
+config FEATURE_UTMP
+ bool "Support utmp file"
+ default y
+ help
+ The file /var/run/utmp is used to track who is currently logged in.
+ With this option on, certain applets (getty, login, telnetd etc)
+ will create and delete entries there.
+ "who" applet requires this option.
+
+config FEATURE_WTMP
+ bool "Support wtmp file"
+ default y
+ select FEATURE_UTMP
+ help
+ The file /var/run/wtmp is used to track when users have logged into
+ and logged out of the system.
+ With this option on, certain applets (getty, login, telnetd etc)
+ will append new entries there.
+ "last" applet requires this option.
+
config FEATURE_PIDFILE
bool "Support writing pidfiles"
- default n
+ default y
help
This option makes some applets (e.g. crond, syslogd, inetd) write
a pidfile in /var/run. Some applications rely on them.
config FEATURE_SUID
bool "Support for SUID/SGID handling"
- default n
+ default y
help
With this option you can install the busybox binary belonging
- to root with the suid bit set, and it'll and it'll automatically drop
+ to root with the suid bit set, and it will automatically drop
priviledges for applets that don't need root access.
- If you're really paranoid and don't want to do this, build two
+ If you are really paranoid and don't want to do this, build two
busybox binaries with different applets in them (and the appropriate
symlinks pointing to each binary), and only set the suid bit on the
- one that needs it. The applets currently marked to need the suid bit
- are login, passwd, su, ping, traceroute, crontab, dnsd, ipcrm, ipcs,
- and vlock.
+ one that needs it. The applets currently marked to need the suid bit
+ are:
+
+ crontab, dnsd, findfs, ipcrm, ipcs, login, passwd, ping, su,
+ traceroute, vlock.
config FEATURE_SUID_CONFIG
bool "Runtime SUID/SGID configuration via /etc/busybox.conf"
- default n if FEATURE_SUID
+ default y if FEATURE_SUID
depends on FEATURE_SUID
help
Allow the SUID / SGID state of an applet to be determined at runtime
- by checking /etc/busybox.conf. (This is sort of a poor man's sudo.)
+ by checking /etc/busybox.conf. (This is sort of a poor man's sudo.)
The format of this file is as follows:
<applet> = [Ssx-][Ssx-][x-] (<username>|<uid>).(<groupname>|<gid>)
An example might help:
[SUID]
- su = ssx root.0 # applet su can be run by anyone and runs with euid=0/egid=0
+ su = ssx root.0 # applet su can be run by anyone and runs with
+ # euid=0/egid=0
su = ssx # exactly the same
- mount = sx- root.disk # applet mount can be run by root and members of group disk
- # and runs with euid=0
+ mount = sx- root.disk # applet mount can be run by root and members
+ # of group disk and runs with euid=0
cp = --- # disable applet cp for everyone
default y
depends on FEATURE_SUID_CONFIG
help
- /etc/busybox.conf should be readable by the user needing the SUID, check
- this option to avoid users to be notified about missing permissions.
+ /etc/busybox.conf should be readable by the user needing the SUID,
+ check this option to avoid users to be notified about missing
+ permissions.
config SELINUX
bool "Support NSA Security Enhanced Linux"
default n
help
- Enable support for SELinux in applets ls, ps, and id. Also provide
+ Enable support for SELinux in applets ls, ps, and id. Also provide
the option of compiling in SELinux applets.
If you do not have a complete SELinux userland installed, this stuff
default "/proc/self/exe"
help
When Busybox applets need to run other busybox applets, BusyBox
- sometimes needs to exec() itself. When the /proc filesystem is
+ sometimes needs to exec() itself. When the /proc filesystem is
mounted, /proc/self/exe always points to the currently running
- executable. If you haven't got /proc, set this to wherever you
+ executable. If you haven't got /proc, set this to wherever you
want to run BusyBox from.
# These are auto-selected by other options
config FEATURE_SYSLOG
- bool "Support for logging to syslog"
+ bool #No description makes it a hidden option
default n
- help
- This option is auto-selected when you select any applet which may
- send its output to syslog. You do not need to select it manually.
+ #help
+ # This option is auto-selected when you select any applet which may
+ # send its output to syslog. You do not need to select it manually.
config FEATURE_HAVE_RPC
- bool "RPC support"
+ bool #No description makes it a hidden option
default n
- help
- This is automatically selected if any of enabled applets need it.
- You do not need to select it manually.
+ #help
+ # This is automatically selected if any of enabled applets need it.
+ # You do not need to select it manually.
endmenu
busybox code.
This feature allows every applet to be built as a tiny
- separate executable. Enabling it for "one big busybox binary"
+ separate executable. Enabling it for "one big busybox binary"
approach serves no purpose and increases code size.
You should almost certainly say "no" to this.
### standalone application which uses libbusybox say 'Y'.
###
### Note: libbusybox is GPL, not LGPL, and exports no stable API that
-### might act as a copyright barrier. We can and will modify the
+### might act as a copyright barrier. We can and will modify the
### exported function set between releases (even minor version number
### changes), and happily break out-of-tree features.
###
config LFS
bool "Build with Large File Support (for accessing files > 2 GB)"
- default n
+ default y
select FDISK_SUPPORT_LARGE_DISKS
help
If you want to build BusyBox with large file support, then enable
- this option. This will have no effect if your kernel or your C
- library lacks large file support for large files. Some of the
+ this option. This will have no effect if your kernel or your C
+ library lacks large file support for large files. Some of the
programs that can benefit from large file support include dd, gzip,
- cp, mount, tar, and many others. If you want to access files larger
- than 2 Gigabytes, enable this option. Otherwise, leave it set to 'N'.
+ cp, mount, tar, and many others. If you want to access files larger
+ than 2 Gigabytes, enable this option. Otherwise, leave it set to 'N'.
config CROSS_COMPILER_PREFIX
string "Cross Compiler prefix"
help
If you want to build BusyBox with a cross compiler, then you
will need to set this to the cross-compiler prefix, for example,
- "i386-uclibc-". Note that CROSS_COMPILE environment variable
- or "make CROSS_COMPILE=xxx ..." will override this selection.
- For native build leave it empty.
+ "i386-uclibc-".
+
+ Note that CROSS_COMPILE environment variable or
+ "make CROSS_COMPILE=xxx ..." will override this selection.
+
+ Native builds leave this empty.
+
+config EXTRA_CFLAGS
+ string "Additional CFLAGS"
+ default ""
+ help
+ Additional CFLAGS to pass to the compiler verbatim.
endmenu
default n
help
Say Y here if you wish to examine BusyBox internals while applets are
- running. This increases the size of the binary considerably, and
- should only be used when doing development. If you are doing
+ running. This increases the size of the binary considerably, and
+ should only be used when doing development. If you are doing
development and want to debug BusyBox, answer Y.
Most people should answer N.
help
The compiler's optimization of source code can eliminate and reorder
code, resulting in an executable that's hard to understand when
- stepping through it with a debugger. This switches it off, resulting
+ stepping through it with a debugger. This switches it off, resulting
in a much bigger executable that more closely matches the source
code.
default NO_DEBUG_LIB
help
Using an additional debugging library will make BusyBox become
- considerable larger and will cause it to run more slowly. You
+ considerable larger and will cause it to run more slowly. You
should always leave this option disabled for production use.
dmalloc support:
----------------
This enables compiling with dmalloc ( http://dmalloc.com/ )
which is an excellent public domain mem leak and malloc problem
- detector. To enable dmalloc, before running busybox you will
+ detector. To enable dmalloc, before running busybox you will
want to properly set your environment, for example:
export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
The 'debug=' value is generated using the following command
- dmalloc -p log-stats -p log-non-free -p log-bad-space -p log-elapsed-time \
- -p check-fence -p check-heap -p check-lists -p check-blank \
- -p check-funcs -p realloc-copy -p allow-free-null
+ dmalloc -p log-stats -p log-non-free -p log-bad-space \
+ -p log-elapsed-time -p check-fence -p check-heap \
+ -p check-lists -p check-blank -p check-funcs -p realloc-copy \
+ -p allow-free-null
Electric-fence support:
-----------------------
- This enables compiling with Electric-fence support. Electric
+ This enables compiling with Electric-fence support. Electric
fence is another very useful malloc debugging library which uses
your computer's virtual memory hardware to detect illegal memory
- accesses. This support will make BusyBox be considerable larger
+ accesses. This support will make BusyBox be considerable larger
and run slower, so you should leave this option disabled unless
you are hunting a hard to find memory problem.
endchoice
-config INCLUDE_SUSv2
- bool "Enable obsolete features removed before SUSv3?"
- default y
- help
- This option will enable backwards compatibility with SuSv2,
- specifically, old-style numeric options ('command -1 <file>')
- will be supported in head, tail, and fold. (Note: should
- affect renice too.)
-
-config PARSE
- bool "Uniform config file parser debugging applet: parse"
+### config PARSE
+### bool "Uniform config file parser debugging applet: parse"
endmenu
config INSTALL_APPLET_HARDLINKS
bool "as hard-links"
help
- Install applets as hard-links to the busybox binary. This might count
- on a filesystem with few inodes.
+ Install applets as hard-links to the busybox binary. This might
+ count on a filesystem with few inodes.
config INSTALL_APPLET_SCRIPT_WRAPPERS
bool "as script wrappers"
config INSTALL_SH_APPLET_SCRIPT_WRAPPER
bool "as script wrapper"
help
- Install /bin/sh applet as script wrapper that call the busybox binary.
+ Install /bin/sh applet as script wrapper that call the busybox
+ binary.
endchoice
source util-linux/Config.in
source miscutils/Config.in
source networking/Config.in
+source printutils/Config.in
+source mailutils/Config.in
source procps/Config.in
-source shell/Config.in
-source sysklogd/Config.in
source runit/Config.in
source selinux/Config.in
-source printutils/Config.in
+source shell/Config.in
+source sysklogd/Config.in