menu "General Configuration"
-config CONFIG_NITPICK
- bool "See lots more (probably unnecessary) configuration options."
+config DESKTOP
+ bool "Enable options for full-blown desktop systems"
+ default y
+ help
+ Enable options and features which are not essential.
+ Select this only if you plan to use busybox on full-blown
+ desktop machine with common Linux distro, not on an embedded box.
+
+config EXTRA_COMPAT
+ bool "Provide compatible behavior for rare corner cases (bigger code)"
default n
help
- Some BusyBox applets have more configuration options than anyone
- will ever care about. To avoid drowining people in complexity, most
- of the applet features that can be set to a sane default value are
- hidden, unless you hit the above switch.
+ This option makes grep, sed etc handle rare corner cases
+ (embedded NUL bytes and such). This makes code bigger and uses
+ some GNU extensions in libc. You probably only need this option
+ if you plan to run busybox on desktop.
- This is better than to telling people to edit the busybox source
- code, but not by much.
+config INCLUDE_SUSv2
+ bool "Enable obsolete features removed before SUSv3"
+ default y
+ help
+ This option will enable backwards compatibility with SuSv2,
+ specifically, old-style numeric options ('command -1 <file>')
+ will be supported in head, tail, and fold. (Note: should
+ affect renice too.)
- See http://en.wikipedia.org/wiki/Fibber_McGee_and_Molly#The_Closet
+config USE_PORTABLE_CODE
+ bool "Avoid using GCC-specific code constructs"
+ default n
+ help
+ Use this option if you are trying to compile busybox with
+ compiler other than gcc.
+ If you do use gcc, this option may needlessly increase code size.
- You have been warned.
+config PLATFORM_LINUX
+ bool "Enable Linux-specific applets and features"
+ default y
+ help
+ For the most part, busybox requires only POSIX compatibility
+ from the target system, but some applets and features use
+ Linux-specific interfaces.
+
+ Answering 'N' here will disable such applets and hide the
+ corresponding configuration options.
choice
prompt "Buffer allocation policy"
- default CONFIG_FEATURE_BUFFERS_USE_MALLOC
+ default FEATURE_BUFFERS_USE_MALLOC
help
There are 3 ways BusyBox can handle buffer allocations:
- Use malloc. This costs code size for the call to xmalloc.
- Put them on stack. For some very small machines with limited stack
- space, this can be deadly. For most folks, this works just fine.
+ space, this can be deadly. For most folks, this works just fine.
- Put them in BSS. This works beautifully for computers with a real
MMU (and OS support), but wastes runtime RAM for uCLinux. This
behavior was the only one available for BusyBox versions 0.48 and
earlier.
-config CONFIG_FEATURE_BUFFERS_USE_MALLOC
+config FEATURE_BUFFERS_USE_MALLOC
bool "Allocate with Malloc"
-config CONFIG_FEATURE_BUFFERS_GO_ON_STACK
+config FEATURE_BUFFERS_GO_ON_STACK
bool "Allocate on the Stack"
-config CONFIG_FEATURE_BUFFERS_GO_IN_BSS
+config FEATURE_BUFFERS_GO_IN_BSS
bool "Allocate in the .bss section"
endchoice
-config CONFIG_SHOW_USAGE
- bool "Show terse applet usage messages"
+config SHOW_USAGE
+ bool "Show applet usage messages"
default y
help
- All BusyBox applets will show help messages when invoked with
- wrong arguments. You can turn off printing these terse usage
- messages if you say no here.
- This will save you up to 7k.
+ Enabling this option, BusyBox applets will show terse help messages
+ when invoked with wrong arguments.
+ If you do not want to show any (helpful) usage message when
+ issuing wrong command syntax, you can say 'N' here,
+ saving approximately 7k.
-config CONFIG_FEATURE_VERBOSE_USAGE
+config FEATURE_VERBOSE_USAGE
bool "Show verbose applet usage messages"
- default n
- select CONFIG_SHOW_USAGE
+ default y
+ depends on SHOW_USAGE
help
- All BusyBox applets will show more verbose help messages when
- busybox is invoked with --help. This will add a lot of text to the
- busybox binary. In the default configuration, this will add about
+ All BusyBox applets will show verbose help messages when
+ busybox is invoked with --help. This will add a lot of text to the
+ busybox binary. In the default configuration, this will add about
13k, but it can add much more depending on your configuration.
-config CONFIG_FEATURE_COMPRESS_USAGE
+config FEATURE_COMPRESS_USAGE
bool "Store applet usage messages in compressed form"
default y
- depends on CONFIG_SHOW_USAGE
+ depends on SHOW_USAGE
help
- Store usage messages in compressed form, uncompress them on-the-fly
- when <applet> --help is called.
+ Store usage messages in .bz compressed form, uncompress them
+ on-the-fly when <applet> --help is called.
-config CONFIG_FEATURE_INSTALLER
+ If you have a really tiny busybox with few applets enabled (and
+ bunzip2 isn't one of them), the overhead of the decompressor might
+ be noticeable. Also, if you run executables directly from ROM
+ and have very little memory, this might not be a win. Otherwise,
+ you probably want this.
+
+config FEATURE_INSTALLER
bool "Support --install [-s] to install applet links at runtime"
- default n
+ default y
help
- Enable 'busybox --install [-s]' support. This will allow you to use
+ Enable 'busybox --install [-s]' support. This will allow you to use
busybox at runtime to create hard links or symlinks for all the
- applets that are compiled into busybox. This feature requires the
- /proc filesystem.
+ applets that are compiled into busybox.
-config CONFIG_LOCALE_SUPPORT
+config INSTALL_NO_USR
+ bool "Don't use /usr"
+ default n
+ help
+ Disable use of /usr. busybox --install and "make install"
+ will install applets only to /bin and /sbin,
+ never to /usr/bin or /usr/sbin.
+
+config LOCALE_SUPPORT
bool "Enable locale support (system needs locale for this to work)"
default n
help
Enable this if your system has locale support and you would like
busybox to support locale settings.
-config CONFIG_GETOPT_LONG
- bool "Enable support for --long-options"
+config UNICODE_SUPPORT
+ bool "Support Unicode"
+ default y
+ help
+ This makes various applets aware that one byte is not
+ one character on screen.
+
+ Busybox aims to eventually work correctly with Unicode displays.
+ Any older encodings are not guaranteed to work.
+ Probably by the time when busybox will be fully Unicode-clean,
+ other encodings will be mainly of historic interest.
+
+config UNICODE_USING_LOCALE
+ bool "Use libc routines for Unicode (else uses internal ones)"
+ default n
+ depends on UNICODE_SUPPORT && LOCALE_SUPPORT
+ help
+ With this option on, Unicode support is implemented using libc
+ routines. Otherwise, internal implementation is used.
+ Internal implementation is smaller.
+
+config FEATURE_CHECK_UNICODE_IN_ENV
+ bool "Check $LANG environment variable"
+ default n
+ depends on UNICODE_SUPPORT && !UNICODE_USING_LOCALE
+ help
+ With this option on, Unicode support is activated
+ only if LANG variable has the value of the form "xxxx.utf8"
+
+ Otherwise, Unicode support will be always enabled and active.
+
+config SUBST_WCHAR
+ int "Character code to substitute unprintable characters with"
+ depends on UNICODE_SUPPORT
+ default 63
+ help
+ Typical values are 63 for '?' (works with any output device),
+ 30 for ASCII substitute control code,
+ 65533 (0xfffd) for Unicode replacement character.
+
+config LAST_SUPPORTED_WCHAR
+ int "Range of supported Unicode characters"
+ depends on UNICODE_SUPPORT
+ default 767
+ help
+ Any character with Unicode value bigger than this is assumed
+ to be non-printable on output device. Many applets replace
+ such chars with substitution character.
+
+ The idea is that many valid printable Unicode chars are
+ nevertheless are not displayed correctly. Think about
+ combining charachers, double-wide hieroglyphs, obscure
+ characters in dozens of ancient scripts...
+ Many terminals, terminal emulators, xterms etc will fail
+ to handle them correctly. Choose the smallest value
+ which suits your needs.
+
+ Typical values are:
+ 126 - ASCII only
+ 767 (0x2ff) - there are no combining chars in [0..767] range
+ (the range includes Latin 1, Latin Ext. A and B),
+ code is ~700 bytes smaller for this case.
+ 4351 (0x10ff) - there are no double-wide chars in [0..4351] range,
+ code is ~300 bytes smaller for this case.
+ 12799 (0x31ff) - nearly all non-ideographic characters are
+ available in [0..12799] range, including
+ East Asian scripts like katakana, hiragana, hangul,
+ bopomofo...
+ 0 - off, any valid printable Unicode character will be printed.
+
+config UNICODE_COMBINING_WCHARS
+ bool "Allow zero-width Unicode characters on output"
default n
- depends on !CONFIG_NO_GETOPT_LONG
+ depends on UNICODE_SUPPORT
+ help
+ With this option off, any Unicode char with width of 0
+ is substituted on output.
+
+config UNICODE_WIDE_WCHARS
+ bool "Allow wide Unicode characters on output"
+ default n
+ depends on UNICODE_SUPPORT
+ help
+ With this option off, any Unicode char with width > 1
+ is substituted on output.
+
+config UNICODE_BIDI_SUPPORT
+ bool "Bidirectional character-aware line input"
+ default n
+ depends on UNICODE_SUPPORT && !UNICODE_USING_LOCALE
+ help
+ With this option on, right-to-left Unicode characters
+ are treated differently on input (e.g. cursor movement).
+
+config UNICODE_NEUTRAL_TABLE
+ bool "In bidi input, support non-ASCII neutral chars too"
+ default n
+ depends on UNICODE_BIDI_SUPPORT
+ help
+ In most cases it's enough to treat only ASCII non-letters
+ (i.e. punctuation, numbers and space) as characters
+ with neutral directionality.
+ With this option on, more extensive (and bigger) table
+ of neutral chars will be used.
+
+config UNICODE_PRESERVE_BROKEN
+ bool "Make it possible to enter sequences of chars which are not Unicode"
+ default n
+ depends on UNICODE_SUPPORT
+ help
+ With this option on, on line-editing input (such as used by shells)
+ invalid UTF-8 bytes are not substituted with the selected
+ substitution character.
+ For example, this means that entering 'l', 's', ' ', 0xff, [Enter]
+ at shell prompt will list file named 0xff (single char name
+ with char value 255), not file named '?'.
+
+config LONG_OPTS
+ bool "Support for --long-options"
+ default y
help
Enable this if you want busybox applets to use the gnu --long-option
style, in addition to single character -a -b -c style options.
-config CONFIG_FEATURE_DEVPTS
+config FEATURE_DEVPTS
bool "Use the devpts filesystem for Unix98 PTYs"
- default y if CONFIG_FEATURE_DEVFS
+ default y
help
Enable if you want BusyBox to use Unix98 PTY support. If enabled,
busybox will use /dev/ptmx for the master side of the pseudoterminal
- and /dev/pts/<number> for the slave side. Otherwise, BSD style
+ and /dev/pts/<number> for the slave side. Otherwise, BSD style
/dev/ttyp<number> will be used. To use this option, you should have
devpts mounted.
-config CONFIG_FEATURE_CLEAN_UP
+config FEATURE_CLEAN_UP
bool "Clean up all memory before exiting (usually not needed)"
default n
help
As a size optimization, busybox normally exits without explicitly
- freeing dynamically allocated memory or closing files. This saves
+ freeing dynamically allocated memory or closing files. This saves
space since the OS will clean up for us, but it can confuse debuggers
like valgrind, which report tons of memory and resource leaks.
Don't enable this unless you have a really good reason to clean
things up manually.
-config CONFIG_FEATURE_SUID
+config FEATURE_UTMP
+ bool "Support utmp file"
+ default y
+ help
+ The file /var/run/utmp is used to track who is currently logged in.
+ With this option on, certain applets (getty, login, telnetd etc)
+ will create and delete entries there.
+ "who" applet requires this option.
+
+config FEATURE_WTMP
+ bool "Support wtmp file"
+ default y
+ depends on FEATURE_UTMP
+ help
+ The file /var/run/wtmp is used to track when users have logged into
+ and logged out of the system.
+ With this option on, certain applets (getty, login, telnetd etc)
+ will append new entries there.
+ "last" applet requires this option.
+
+config FEATURE_PIDFILE
+ bool "Support writing pidfiles"
+ default y
+ help
+ This option makes some applets (e.g. crond, syslogd, inetd) write
+ a pidfile in /var/run. Some applications rely on them.
+
+config FEATURE_SUID
bool "Support for SUID/SGID handling"
- default n
+ default y
help
With this option you can install the busybox binary belonging
- to root with the suid bit set, and it'll and it'll automatically drop
- priviledges for applets that don't need root access.
+ to root with the suid bit set, enabling some applets to perform
+ root-level operations even when run by ordinary users
+ (for example, mounting of user mounts in fstab needs this).
- If you're really paranoid and don't want to do this, build two
+ Busybox will automatically drop priviledges for applets
+ that don't need root access.
+
+ If you are really paranoid and don't want to do this, build two
busybox binaries with different applets in them (and the appropriate
symlinks pointing to each binary), and only set the suid bit on the
- one that needs it. The applets currently marked to need the suid bit
- are login, passwd, su, ping, traceroute, crontab, dnsd, ipcrm, ipcs,
- and vlock.
+ one that needs it.
+
+ The applets which require root rights (need suid bit or
+ to be run by root) and will refuse to execute otherwise:
+ crontab, login, passwd, su, vlock, wall.
+
+ The applets which will use root rights if they have them
+ (via suid bit, or because run by root), but would try to work
+ without root right nevertheless:
+ findfs, ping[6], traceroute[6], mount.
+
+ Note that if you DONT select this option, but DO make busybox
+ suid root, ALL applets will run under root, which is a huge
+ security hole (think "cp /some/file /etc/passwd").
-config CONFIG_FEATURE_SUID_CONFIG
+config FEATURE_SUID_CONFIG
bool "Runtime SUID/SGID configuration via /etc/busybox.conf"
- default n if CONFIG_FEATURE_SUID
- depends on CONFIG_FEATURE_SUID
+ default y
+ depends on FEATURE_SUID
help
Allow the SUID / SGID state of an applet to be determined at runtime
- by checking /etc/busybox.conf. (This is sort of a poor man's sudo.)
+ by checking /etc/busybox.conf. (This is sort of a poor man's sudo.)
The format of this file is as follows:
- <applet> = [Ssx-][Ssx-][x-] (<username>|<uid>).(<groupname>|<gid>)
+ APPLET = [Ssx-][Ssx-][x-] [USER.GROUP]
+
+ s: USER or GROUP is allowed to execute APPLET.
+ APPLET will run under USER or GROUP
+ (reagardless of who's running it).
+ S: USER or GROUP is NOT allowed to execute APPLET.
+ APPLET will run under USER or GROUP.
+ This option is not very sensical.
+ x: USER/GROUP/others are allowed to execute APPLET.
+ No UID/GID change will be done when it is run.
+ -: USER/GROUP/others are not allowed to execute APPLET.
An example might help:
[SUID]
- su = ssx root.0 # applet su can be run by anyone and runs with euid=0/egid=0
+ su = ssx root.0 # applet su can be run by anyone and runs with
+ # euid=0/egid=0
su = ssx # exactly the same
- mount = sx- root.disk # applet mount can be run by root and members of group disk
- # and runs with euid=0
+ mount = sx- root.disk # applet mount can be run by root and members
+ # of group disk (but not anyone else)
+ # and runs with euid=0 (egid is not changed)
cp = --- # disable applet cp for everyone
The file has to be owned by user root, group root and has to be
writeable only by root:
- (chown 0.0 /etc/busybox.conf; chmod 600 /etc/busybox.conf)
+ (chown 0.0 /etc/busybox.conf; chmod 600 /etc/busybox.conf)
The busybox executable has to be owned by user root, group
root and has to be setuid root for this to work:
- (chown 0.0 /bin/busybox; chmod 4755 /bin/busybox)
+ (chown 0.0 /bin/busybox; chmod 4755 /bin/busybox)
Robert 'sandman' Griebl has more information here:
<url: http://www.softforge.de/bb/suid.html >.
-config CONFIG_FEATURE_SUID_CONFIG_QUIET
+config FEATURE_SUID_CONFIG_QUIET
bool "Suppress warning message if /etc/busybox.conf is not readable"
default y
- depends on CONFIG_FEATURE_SUID_CONFIG
+ depends on FEATURE_SUID_CONFIG
help
- /etc/busybox.conf should be readable by the user needing the SUID, check
- this option to avoid users to be notified about missing permissions.
+ /etc/busybox.conf should be readable by the user needing the SUID,
+ check this option to avoid users to be notified about missing
+ permissions.
-config CONFIG_SELINUX
+config SELINUX
bool "Support NSA Security Enhanced Linux"
default n
+ select PLATFORM_LINUX
help
- Enable support for SELinux in applets ls, ps, and id. Also provide
+ Enable support for SELinux in applets ls, ps, and id. Also provide
the option of compiling in SELinux applets.
If you do not have a complete SELinux userland installed, this stuff
Most people will leave this set to 'N'.
+config FEATURE_PREFER_APPLETS
+ bool "exec prefers applets"
+ default n
+ help
+ This is an experimental option which directs applets about to
+ call 'exec' to try and find an applicable busybox applet before
+ searching the PATH. This is typically done by exec'ing
+ /proc/self/exe.
+ This may affect shell, find -exec, xargs and similar applets.
+ They will use applets even if /bin/<applet> -> busybox link
+ is missing (or is not a link to busybox). However, this causes
+ problems in chroot jails without mounted /proc and with ps/top
+ (command name can be shown as 'exe' for applets started this way).
+
+config BUSYBOX_EXEC_PATH
+ string "Path to BusyBox executable"
+ default "/proc/self/exe"
+ help
+ When Busybox applets need to run other busybox applets, BusyBox
+ sometimes needs to exec() itself. When the /proc filesystem is
+ mounted, /proc/self/exe always points to the currently running
+ executable. If you haven't got /proc, set this to wherever you
+ want to run BusyBox from.
+
+# These are auto-selected by other options
+
+config FEATURE_SYSLOG
+ bool #No description makes it a hidden option
+ default n
+ #help
+ # This option is auto-selected when you select any applet which may
+ # send its output to syslog. You do not need to select it manually.
+
+config FEATURE_HAVE_RPC
+ bool #No description makes it a hidden option
+ default n
+ #help
+ # This is automatically selected if any of enabled applets need it.
+ # You do not need to select it manually.
+
endmenu
menu 'Build Options'
-config CONFIG_STATIC
+config STATIC
bool "Build BusyBox as a static binary (no shared libs)"
default n
help
Most people will leave this set to 'N'.
-config CONFIG_BUILD_LIBBUSYBOX
- bool "Build shared libbusybox"
- default y
+config PIE
+ bool "Build BusyBox as a position independent executable"
+ default n
+ depends on !STATIC
+ help
+ Hardened code option. PIE binaries are loaded at a different
+ address at each invocation. This has some overhead,
+ particularly on x86-32 which is short on registers.
+
+ Most people will leave this set to 'N'.
+
+config NOMMU
+ bool "Force NOMMU build"
+ default n
help
- Build a shared library libbusybox.so which contains all
- libraries used inside busybox.
+ Busybox tries to detect whether architecture it is being
+ built against supports MMU or not. If this detection fails,
+ or if you want to build NOMMU version of busybox for testing,
+ you may force NOMMU build here.
+
+ Most people will leave this set to 'N'.
-config CONFIG_FEATURE_FULL_LIBBUSYBOX
- bool "Feature-complete libbusybox"
- default n if !CONFIG_FEATURE_SHARED_BUSYBOX
- depends on CONFIG_BUILD_LIBBUSYBOX
+# PIE can be made to work with BUILD_LIBBUSYBOX, but currently
+# build system does not support that
+config BUILD_LIBBUSYBOX
+ bool "Build shared libbusybox"
+ default n
+ depends on !FEATURE_PREFER_APPLETS && !PIE && !STATIC
+ help
+ Build a shared library libbusybox.so.N.N.N which contains all
+ busybox code.
+
+ This feature allows every applet to be built as a tiny
+ separate executable. Enabling it for "one big busybox binary"
+ approach serves no purpose and increases code size.
+ You should almost certainly say "no" to this.
+
+### config FEATURE_FULL_LIBBUSYBOX
+### bool "Feature-complete libbusybox"
+### default n if !FEATURE_SHARED_BUSYBOX
+### depends on BUILD_LIBBUSYBOX
+### help
+### Build a libbusybox with the complete feature-set, disregarding
+### the actually selected config.
+###
+### Normally, libbusybox will only contain the features which are
+### used by busybox itself. If you plan to write a separate
+### standalone application which uses libbusybox say 'Y'.
+###
+### Note: libbusybox is GPL, not LGPL, and exports no stable API that
+### might act as a copyright barrier. We can and will modify the
+### exported function set between releases (even minor version number
+### changes), and happily break out-of-tree features.
+###
+### Say 'N' if in doubt.
+
+config FEATURE_INDIVIDUAL
+ bool "Produce a binary for each applet, linked against libbusybox"
+ default y
+ depends on BUILD_LIBBUSYBOX
help
- Build a libbusybox with the complete feature-set, disregarding
- the actually selected config.
+ If your CPU architecture doesn't allow for sharing text/rodata
+ sections of running binaries, but allows for runtime dynamic
+ libraries, this option will allow you to reduce memory footprint
+ when you have many different applets running at once.
- Normally, libbusybox will only contain the features which are
- used by busybox itself. If you plan to write a separate
- standalone application which uses libbusybox say 'Y'.
+ If your CPU architecture allows for sharing text/rodata,
+ having single binary is more optimal.
- Note: libbusybox is GPL, not LGPL, and exports no stable API that
- might act as a copyright barrier. We can and will modify the
- exported function set between releases (even minor version number
- changes), and happily break out-of-tree features.
+ Each applet will be a tiny program, dynamically linked
+ against libbusybox.so.N.N.N.
- Say 'N' if in doubt.
+ You need to have a working dynamic linker.
-config CONFIG_FEATURE_SHARED_BUSYBOX
- bool "Use shared libbusybox for busybox"
- default y if CONFIG_BUILD_LIBBUSYBOX
- depends on !CONFIG_STATIC && CONFIG_BUILD_LIBBUSYBOX
+config FEATURE_SHARED_BUSYBOX
+ bool "Produce additional busybox binary linked against libbusybox"
+ default y
+ depends on BUILD_LIBBUSYBOX
help
- Use libbusybox.so also for busybox itself.
- You need to have a working dynamic linker to use this variant.
-
-config CONFIG_LFS
+ Build busybox, dynamically linked against libbusybox.so.N.N.N.
+
+ You need to have a working dynamic linker.
+
+### config BUILD_AT_ONCE
+### bool "Compile all sources at once"
+### default n
+### help
+### Normally each source-file is compiled with one invocation of
+### the compiler.
+### If you set this option, all sources are compiled at once.
+### This gives the compiler more opportunities to optimize which can
+### result in smaller and/or faster binaries.
+###
+### Setting this option will consume alot of memory, e.g. if you
+### enable all applets with all features, gcc uses more than 300MB
+### RAM during compilation of busybox.
+###
+### This option is most likely only beneficial for newer compilers
+### such as gcc-4.1 and above.
+###
+### Say 'N' unless you know what you are doing.
+
+config LFS
bool "Build with Large File Support (for accessing files > 2 GB)"
- default n
- select FDISK_SUPPORT_LARGE_DISKS
+ default y
help
If you want to build BusyBox with large file support, then enable
- this option. This will have no effect if your kernel or your C
- library lacks large file support for large files. Some of the
+ this option. This will have no effect if your kernel or your C
+ library lacks large file support for large files. Some of the
programs that can benefit from large file support include dd, gzip,
- cp, mount, tar, and many others. If you want to access files larger
- than 2 Gigabytes, enable this option. Otherwise, leave it set to 'N'.
-
-config USING_CROSS_COMPILER
- bool "Do you want to build BusyBox with a Cross Compiler?"
- default n
- help
- Do you want to build BusyBox with a Cross Compiler? If so,
- then enable this option. Otherwise leave it set to 'N'.
+ cp, mount, tar, and many others. If you want to access files larger
+ than 2 Gigabytes, enable this option. Otherwise, leave it set to 'N'.
config CROSS_COMPILER_PREFIX
string "Cross Compiler prefix"
- default "/usr/i386-linux-uclibc/bin/i386-uclibc-"
- depends on USING_CROSS_COMPILER
- help
- If you want to build BusyBox with a cross compiler, then you
- will need to set this to the cross-compiler prefix. For example,
- if my cross-compiler is /usr/i386-linux-uclibc/bin/i386-uclibc-gcc
- then I would enter '/usr/i386-linux-uclibc/bin/i386-uclibc-' here,
- which will ensure the correct compiler is used.
-
-config EXTRA_CFLAGS_OPTIONS
- string "Any extra CFLAGS options for the compiler?"
default ""
help
- Do you want to pass any extra CFLAGS options to the compiler as
- you build BusyBox? If so, this is the option for you... For example,
- if you want to add some simple compiler switches (like -march=i686),
- or check for warnings using -Werror, just those options here.
-
-config CONFIG_BUILD_AT_ONCE
- bool "Compile all sources at once"
- default n
- help
- Normally each source-file is compiled with one invocation of
- the compiler.
- If you set this option, all sources are compiled at once.
- This gives the compiler more opportunities to optimize which can
- result in smaller and/or faster binaries.
+ If you want to build BusyBox with a cross compiler, then you
+ will need to set this to the cross-compiler prefix, for example,
+ "i386-uclibc-".
- Setting this option will consume alot of memory, e.g. if you
- enable all applets with all features, gcc uses more than 300MB
- RAM during compilation of busybox.
+ Note that CROSS_COMPILE environment variable or
+ "make CROSS_COMPILE=xxx ..." will override this selection.
- This option is most likely only beneficial for newer compilers
- such as gcc-4.1 and above.
+ Native builds leave this empty.
- Say 'N' unless you know what you are doing.
+config EXTRA_CFLAGS
+ string "Additional CFLAGS"
+ default ""
+ help
+ Additional CFLAGS to pass to the compiler verbatim.
endmenu
menu 'Debugging Options'
-config CONFIG_DEBUG
+config DEBUG
bool "Build BusyBox with extra Debugging symbols"
default n
help
Say Y here if you wish to examine BusyBox internals while applets are
- running. This increases the size of the binary considerably, and
- should only be used when doing development. If you are doing
+ running. This increases the size of the binary considerably, and
+ should only be used when doing development. If you are doing
development and want to debug BusyBox, answer Y.
Most people should answer N.
-config CONFIG_DEBUG_PESSIMIZE
- bool "Disable compiler optimizations."
+config DEBUG_PESSIMIZE
+ bool "Disable compiler optimizations"
default n
- depends on CONFIG_DEBUG
+ depends on DEBUG
help
The compiler's optimization of source code can eliminate and reorder
code, resulting in an executable that's hard to understand when
- stepping through it with a debugger. This switches it off, resulting
+ stepping through it with a debugger. This switches it off, resulting
in a much bigger executable that more closely matches the source
code.
+config WERROR
+ bool "Abort compilation on any warning"
+ default n
+ help
+ Selecting this will add -Werror to gcc command line.
+
+ Most people should answer N.
+
choice
prompt "Additional debugging library"
- default CONFIG_NO_DEBUG_LIB
- depends on CONFIG_DEBUG
+ default NO_DEBUG_LIB
help
Using an additional debugging library will make BusyBox become
- considerable larger and will cause it to run more slowly. You
+ considerable larger and will cause it to run more slowly. You
should always leave this option disabled for production use.
dmalloc support:
----------------
This enables compiling with dmalloc ( http://dmalloc.com/ )
which is an excellent public domain mem leak and malloc problem
- detector. To enable dmalloc, before running busybox you will
+ detector. To enable dmalloc, before running busybox you will
want to properly set your environment, for example:
export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
The 'debug=' value is generated using the following command
- dmalloc -p log-stats -p log-non-free -p log-bad-space -p log-elapsed-time \
- -p check-fence -p check-heap -p check-lists -p check-blank \
- -p check-funcs -p realloc-copy -p allow-free-null
+ dmalloc -p log-stats -p log-non-free -p log-bad-space \
+ -p log-elapsed-time -p check-fence -p check-heap \
+ -p check-lists -p check-blank -p check-funcs -p realloc-copy \
+ -p allow-free-null
Electric-fence support:
-----------------------
- This enables compiling with Electric-fence support. Electric
+ This enables compiling with Electric-fence support. Electric
fence is another very useful malloc debugging library which uses
your computer's virtual memory hardware to detect illegal memory
- accesses. This support will make BusyBox be considerable larger
+ accesses. This support will make BusyBox be considerable larger
and run slower, so you should leave this option disabled unless
you are hunting a hard to find memory problem.
-config CONFIG_NO_DEBUG_LIB
+config NO_DEBUG_LIB
bool "None"
-config CONFIG_DMALLOC
+config DMALLOC
bool "Dmalloc"
-config CONFIG_EFENCE
+config EFENCE
bool "Electric-fence"
endchoice
-config CONFIG_DEBUG_YANK_SUSv2
- bool "Disable obsolete features removed before SUSv3?"
- default y
+endmenu
+
+menu 'Installation Options ("make install" behavior)'
+
+choice
+ prompt "What kind of applet links to install"
+ default INSTALL_APPLET_SYMLINKS
help
- This option will disable backwards compatibility with SuSv2,
- specifically, old-style numeric options ('command -1 <file>')
- will not be supported in head, tail, and fold. (Note: should
- yank from renice too.)
+ Choose what kind of links to applets are created by "make install".
-endmenu
+config INSTALL_APPLET_SYMLINKS
+ bool "as soft-links"
+ help
+ Install applets as soft-links to the busybox binary. This needs some
+ free inodes on the filesystem, but might help with filesystem
+ generators that can't cope with hard-links.
-menu 'Installation Options'
+config INSTALL_APPLET_HARDLINKS
+ bool "as hard-links"
+ help
+ Install applets as hard-links to the busybox binary. This might
+ count on a filesystem with few inodes.
-config CONFIG_INSTALL_NO_USR
- bool "Don't use /usr"
- default n
+config INSTALL_APPLET_SCRIPT_WRAPPERS
+ bool "as script wrappers"
+ help
+ Install applets as script wrappers that call the busybox binary.
+
+config INSTALL_APPLET_DONT
+ bool "not installed"
help
- Disable use of /usr. Don't activate this option if you don't know
- that you really want this behaviour.
+ Do not install applet links. Useful when you plan to use
+ busybox --install for installing links, or plan to use
+ a standalone shell and thus don't need applet links.
+
+endchoice
choice
- prompt "Applets links"
- default CONFIG_INSTALL_APPLET_SYMLINKS
- help
- Choose how you install applets links.
-
-config CONFIG_INSTALL_APPLET_SYMLINKS
- bool "as soft-links"
- help
- Install applets as soft-links to the busybox binary. This needs some
- free inodes on the filesystem, but might help with filesystem
- generators that can't cope with hard-links.
-
-config CONFIG_INSTALL_APPLET_HARDLINKS
- bool "as hard-links"
- help
- Install applets as hard-links to the busybox binary. This might count
- on a filesystem with few inodes.
-
-config CONFIG_INSTALL_APPLET_DONT
- bool
- prompt "not installed"
- depends on CONFIG_FEATURE_INSTALLER || CONFIG_FEATURE_SH_STANDALONE_SHELL
- help
- Do not install applets links. Usefull when using the -install feature
- or a standalone shell for rescue pruposes.
+ prompt "/bin/sh applet link"
+ default INSTALL_SH_APPLET_SYMLINK
+ depends on INSTALL_APPLET_SCRIPT_WRAPPERS
+ help
+ Choose how you install /bin/sh applet link.
+
+config INSTALL_SH_APPLET_SYMLINK
+ bool "as soft-link"
+ help
+ Install /bin/sh applet as soft-link to the busybox binary.
+
+config INSTALL_SH_APPLET_HARDLINK
+ bool "as hard-link"
+ help
+ Install /bin/sh applet as hard-link to the busybox binary.
+
+config INSTALL_SH_APPLET_SCRIPT_WRAPPER
+ bool "as script wrapper"
+ help
+ Install /bin/sh applet as script wrapper that calls
+ the busybox binary.
endchoice
source util-linux/Config.in
source miscutils/Config.in
source networking/Config.in
+source printutils/Config.in
+source mailutils/Config.in
source procps/Config.in
+source runit/Config.in
+source selinux/Config.in
source shell/Config.in
source sysklogd/Config.in