menu "General Configuration"
-config NITPICK
- bool "See lots more (probably unnecessary) configuration options."
- default n
- help
- Some BusyBox applets have more configuration options than anyone
- will ever care about. To avoid drowining people in complexity, most
- of the applet features that can be set to a sane default value are
- hidden, unless you hit the above switch.
-
- This is better than to telling people to edit the busybox source
- code, but not by much.
-
- See http://en.wikipedia.org/wiki/Fibber_McGee_and_Molly#The_Closet
-
- You have been warned.
-
config DESKTOP
bool "Enable options for full-blown desktop systems"
- default n
+ default y
help
Enable options and features which are not essential.
Select this only if you plan to use busybox on full-blown
desktop machine with common Linux distro, not on an embedded box.
+config EXTRA_COMPAT
+ bool "Provide compatible behavior for rare corner cases (bigger code)"
+ default n
+ help
+ This option makes grep, sed etc handle rare corner cases
+ (embedded NUL bytes and such). This makes code bigger and uses
+ some GNU extensions in libc. You probably only need this option
+ if you plan to run busybox on desktop.
+
+config INCLUDE_SUSv2
+ bool "Enable obsolete features removed before SUSv3"
+ default y
+ help
+ This option will enable backwards compatibility with SuSv2,
+ specifically, old-style numeric options ('command -1 <file>')
+ will be supported in head, tail, and fold. (Note: should
+ affect renice too.)
+
+config USE_PORTABLE_CODE
+ bool "Avoid using GCC-specific code constructs"
+ default n
+ help
+ Use this option if you are trying to compile busybox with
+ compiler other than gcc.
+ If you do use gcc, this option may needlessly increase code size.
+
+config PLATFORM_LINUX
+ bool "Enable Linux-specific applets and features"
+ default y
+ help
+ For the most part, busybox requires only POSIX compatibility
+ from the target system, but some applets and features use
+ Linux-specific interfaces.
+
+ Answering 'N' here will disable such applets and hide the
+ corresponding configuration options.
+
choice
prompt "Buffer allocation policy"
default FEATURE_BUFFERS_USE_MALLOC
- depends on NITPICK
help
There are 3 ways BusyBox can handle buffer allocations:
- Use malloc. This costs code size for the call to xmalloc.
- Put them on stack. For some very small machines with limited stack
- space, this can be deadly. For most folks, this works just fine.
+ space, this can be deadly. For most folks, this works just fine.
- Put them in BSS. This works beautifully for computers with a real
MMU (and OS support), but wastes runtime RAM for uCLinux. This
behavior was the only one available for BusyBox versions 0.48 and
endchoice
config SHOW_USAGE
- bool "Show terse applet usage messages"
+ bool "Show applet usage messages"
default y
help
- All BusyBox applets will show help messages when invoked with
- wrong arguments. You can turn off printing these terse usage
- messages if you say no here.
- This will save you up to 7k.
+ Enabling this option, BusyBox applets will show terse help messages
+ when invoked with wrong arguments.
+ If you do not want to show any (helpful) usage message when
+ issuing wrong command syntax, you can say 'N' here,
+ saving approximately 7k.
config FEATURE_VERBOSE_USAGE
bool "Show verbose applet usage messages"
- default n
- select SHOW_USAGE
+ default y
+ depends on SHOW_USAGE
help
- All BusyBox applets will show more verbose help messages when
- busybox is invoked with --help. This will add a lot of text to the
- busybox binary. In the default configuration, this will add about
+ All BusyBox applets will show verbose help messages when
+ busybox is invoked with --help. This will add a lot of text to the
+ busybox binary. In the default configuration, this will add about
13k, but it can add much more depending on your configuration.
config FEATURE_COMPRESS_USAGE
default y
depends on SHOW_USAGE
help
- Store usage messages in compressed form, uncompress them on-the-fly
- when <applet> --help is called.
+ Store usage messages in .bz compressed form, uncompress them
+ on-the-fly when <applet> --help is called.
If you have a really tiny busybox with few applets enabled (and
bunzip2 isn't one of them), the overhead of the decompressor might
- be noticeable. Also, if you run executables directly from ROM
- and have very little memory, this might not be a win. Otherwise,
+ be noticeable. Also, if you run executables directly from ROM
+ and have very little memory, this might not be a win. Otherwise,
you probably want this.
+config BUSYBOX
+ bool "Include busybox applet"
+ default y
+ help
+ The busybox applet provides general help regarding busybox and
+ allows the included applets to be listed. It's also required
+ if applet links are to be installed at runtime.
+
+ If you can live without these features disabling this will save
+ some space.
+
config FEATURE_INSTALLER
bool "Support --install [-s] to install applet links at runtime"
- default n
+ default y
+ depends on BUSYBOX
help
- Enable 'busybox --install [-s]' support. This will allow you to use
+ Enable 'busybox --install [-s]' support. This will allow you to use
busybox at runtime to create hard links or symlinks for all the
applets that are compiled into busybox.
+config INSTALL_NO_USR
+ bool "Don't use /usr"
+ default n
+ help
+ Disable use of /usr. busybox --install and "make install"
+ will install applets only to /bin and /sbin,
+ never to /usr/bin or /usr/sbin.
+
config LOCALE_SUPPORT
bool "Enable locale support (system needs locale for this to work)"
default n
Enable this if your system has locale support and you would like
busybox to support locale settings.
-config GETOPT_LONG
- bool "Enable support for --long-options"
+config UNICODE_SUPPORT
+ bool "Support Unicode"
+ default y
+ help
+ This makes various applets aware that one byte is not
+ one character on screen.
+
+ Busybox aims to eventually work correctly with Unicode displays.
+ Any older encodings are not guaranteed to work.
+ Probably by the time when busybox will be fully Unicode-clean,
+ other encodings will be mainly of historic interest.
+
+config UNICODE_USING_LOCALE
+ bool "Use libc routines for Unicode (else uses internal ones)"
+ default n
+ depends on UNICODE_SUPPORT && LOCALE_SUPPORT
+ help
+ With this option on, Unicode support is implemented using libc
+ routines. Otherwise, internal implementation is used.
+ Internal implementation is smaller.
+
+config FEATURE_CHECK_UNICODE_IN_ENV
+ bool "Check $LC_ALL, $LC_CTYPE and $LANG environment variables"
+ default n
+ depends on UNICODE_SUPPORT && !UNICODE_USING_LOCALE
+ help
+ With this option on, Unicode support is activated
+ only if locale-related variables have the value of the form
+ "xxxx.utf8"
+
+ Otherwise, Unicode support will be always enabled and active.
+
+config SUBST_WCHAR
+ int "Character code to substitute unprintable characters with"
+ depends on UNICODE_SUPPORT
+ default 63
+ help
+ Typical values are 63 for '?' (works with any output device),
+ 30 for ASCII substitute control code,
+ 65533 (0xfffd) for Unicode replacement character.
+
+config LAST_SUPPORTED_WCHAR
+ int "Range of supported Unicode characters"
+ depends on UNICODE_SUPPORT
+ default 767
+ help
+ Any character with Unicode value bigger than this is assumed
+ to be non-printable on output device. Many applets replace
+ such chars with substitution character.
+
+ The idea is that many valid printable Unicode chars are
+ nevertheless are not displayed correctly. Think about
+ combining charachers, double-wide hieroglyphs, obscure
+ characters in dozens of ancient scripts...
+ Many terminals, terminal emulators, xterms etc will fail
+ to handle them correctly. Choose the smallest value
+ which suits your needs.
+
+ Typical values are:
+ 126 - ASCII only
+ 767 (0x2ff) - there are no combining chars in [0..767] range
+ (the range includes Latin 1, Latin Ext. A and B),
+ code is ~700 bytes smaller for this case.
+ 4351 (0x10ff) - there are no double-wide chars in [0..4351] range,
+ code is ~300 bytes smaller for this case.
+ 12799 (0x31ff) - nearly all non-ideographic characters are
+ available in [0..12799] range, including
+ East Asian scripts like katakana, hiragana, hangul,
+ bopomofo...
+ 0 - off, any valid printable Unicode character will be printed.
+
+config UNICODE_COMBINING_WCHARS
+ bool "Allow zero-width Unicode characters on output"
+ default n
+ depends on UNICODE_SUPPORT
+ help
+ With this option off, any Unicode char with width of 0
+ is substituted on output.
+
+config UNICODE_WIDE_WCHARS
+ bool "Allow wide Unicode characters on output"
+ default n
+ depends on UNICODE_SUPPORT
+ help
+ With this option off, any Unicode char with width > 1
+ is substituted on output.
+
+config UNICODE_BIDI_SUPPORT
+ bool "Bidirectional character-aware line input"
+ default n
+ depends on UNICODE_SUPPORT && !UNICODE_USING_LOCALE
+ help
+ With this option on, right-to-left Unicode characters
+ are treated differently on input (e.g. cursor movement).
+
+config UNICODE_NEUTRAL_TABLE
+ bool "In bidi input, support non-ASCII neutral chars too"
+ default n
+ depends on UNICODE_BIDI_SUPPORT
+ help
+ In most cases it's enough to treat only ASCII non-letters
+ (i.e. punctuation, numbers and space) as characters
+ with neutral directionality.
+ With this option on, more extensive (and bigger) table
+ of neutral chars will be used.
+
+config UNICODE_PRESERVE_BROKEN
+ bool "Make it possible to enter sequences of chars which are not Unicode"
+ default n
+ depends on UNICODE_SUPPORT
+ help
+ With this option on, on line-editing input (such as used by shells)
+ invalid UTF-8 bytes are not substituted with the selected
+ substitution character.
+ For example, this means that entering 'l', 's', ' ', 0xff, [Enter]
+ at shell prompt will list file named 0xff (single char name
+ with char value 255), not file named '?'.
+
+config PAM
+ bool "Support for PAM (Pluggable Authentication Modules)"
+ default n
+ help
+ Use PAM in some busybox applets (currently login and httpd) instead
+ of direct access to password database.
+
+config FEATURE_USE_SENDFILE
+ bool "Use sendfile system call"
+ default y
+ select PLATFORM_LINUX
+ help
+ When enabled, busybox will use the kernel sendfile() function
+ instead of read/write loops to copy data between file descriptors
+ (for example, cp command does this a lot).
+ If sendfile() doesn't work, copying code falls back to read/write
+ loop. sendfile() was originally implemented for faster I/O
+ from files to sockets, but since Linux 2.6.33 it was extended
+ to work for many more file types.
+
+config LONG_OPTS
+ bool "Support for --long-options"
default y
help
Enable this if you want busybox applets to use the gnu --long-option
help
Enable if you want BusyBox to use Unix98 PTY support. If enabled,
busybox will use /dev/ptmx for the master side of the pseudoterminal
- and /dev/pts/<number> for the slave side. Otherwise, BSD style
+ and /dev/pts/<number> for the slave side. Otherwise, BSD style
/dev/ttyp<number> will be used. To use this option, you should have
devpts mounted.
config FEATURE_CLEAN_UP
bool "Clean up all memory before exiting (usually not needed)"
default n
- depends on NITPICK
help
As a size optimization, busybox normally exits without explicitly
- freeing dynamically allocated memory or closing files. This saves
+ freeing dynamically allocated memory or closing files. This saves
space since the OS will clean up for us, but it can confuse debuggers
like valgrind, which report tons of memory and resource leaks.
Don't enable this unless you have a really good reason to clean
things up manually.
+config FEATURE_UTMP
+ bool "Support utmp file"
+ default y
+ help
+ The file /var/run/utmp is used to track who is currently logged in.
+ With this option on, certain applets (getty, login, telnetd etc)
+ will create and delete entries there.
+ "who" applet requires this option.
+
+config FEATURE_WTMP
+ bool "Support wtmp file"
+ default y
+ depends on FEATURE_UTMP
+ help
+ The file /var/run/wtmp is used to track when users have logged into
+ and logged out of the system.
+ With this option on, certain applets (getty, login, telnetd etc)
+ will append new entries there.
+ "last" applet requires this option.
+
config FEATURE_PIDFILE
bool "Support writing pidfiles"
- default n
+ default y
help
This option makes some applets (e.g. crond, syslogd, inetd) write
- a pidfile in /var/run. Some applications rely on them.
+ a pidfile at the configured PID_FILE_PATH. It has no effect
+ on applets which require pidfiles to run.
+
+config PID_FILE_PATH
+ string "Path to directory for pidfile"
+ default "/var/run"
+ depends on FEATURE_PIDFILE
+ help
+ This is the default path where pidfiles are created. Applets which
+ allow you to set the pidfile path on the command line will override
+ this value. The option has no effect on applets that require you to
+ specify a pidfile path.
config FEATURE_SUID
bool "Support for SUID/SGID handling"
- default n
+ default y
help
With this option you can install the busybox binary belonging
- to root with the suid bit set, and it'll and it'll automatically drop
- priviledges for applets that don't need root access.
+ to root with the suid bit set, enabling some applets to perform
+ root-level operations even when run by ordinary users
+ (for example, mounting of user mounts in fstab needs this).
+
+ Busybox will automatically drop privileges for applets
+ that don't need root access.
- If you're really paranoid and don't want to do this, build two
+ If you are really paranoid and don't want to do this, build two
busybox binaries with different applets in them (and the appropriate
symlinks pointing to each binary), and only set the suid bit on the
- one that needs it. The applets currently marked to need the suid bit
- are login, passwd, su, ping, traceroute, crontab, dnsd, ipcrm, ipcs,
- and vlock.
+ one that needs it.
+
+ The applets which require root rights (need suid bit or
+ to be run by root) and will refuse to execute otherwise:
+ crontab, login, passwd, su, vlock, wall.
+
+ The applets which will use root rights if they have them
+ (via suid bit, or because run by root), but would try to work
+ without root right nevertheless:
+ findfs, ping[6], traceroute[6], mount.
+
+ Note that if you DONT select this option, but DO make busybox
+ suid root, ALL applets will run under root, which is a huge
+ security hole (think "cp /some/file /etc/passwd").
config FEATURE_SUID_CONFIG
bool "Runtime SUID/SGID configuration via /etc/busybox.conf"
- default n if FEATURE_SUID
+ default y
depends on FEATURE_SUID
help
Allow the SUID / SGID state of an applet to be determined at runtime
- by checking /etc/busybox.conf. (This is sort of a poor man's sudo.)
+ by checking /etc/busybox.conf. (This is sort of a poor man's sudo.)
The format of this file is as follows:
- <applet> = [Ssx-][Ssx-][x-] (<username>|<uid>).(<groupname>|<gid>)
+ APPLET = [Ssx-][Ssx-][x-] [USER.GROUP]
+
+ s: USER or GROUP is allowed to execute APPLET.
+ APPLET will run under USER or GROUP
+ (reagardless of who's running it).
+ S: USER or GROUP is NOT allowed to execute APPLET.
+ APPLET will run under USER or GROUP.
+ This option is not very sensical.
+ x: USER/GROUP/others are allowed to execute APPLET.
+ No UID/GID change will be done when it is run.
+ -: USER/GROUP/others are not allowed to execute APPLET.
An example might help:
[SUID]
- su = ssx root.0 # applet su can be run by anyone and runs with euid=0/egid=0
+ su = ssx root.0 # applet su can be run by anyone and runs with
+ # euid=0/egid=0
su = ssx # exactly the same
- mount = sx- root.disk # applet mount can be run by root and members of group disk
- # and runs with euid=0
+ mount = sx- root.disk # applet mount can be run by root and members
+ # of group disk (but not anyone else)
+ # and runs with euid=0 (egid is not changed)
cp = --- # disable applet cp for everyone
The file has to be owned by user root, group root and has to be
writeable only by root:
- (chown 0.0 /etc/busybox.conf; chmod 600 /etc/busybox.conf)
+ (chown 0.0 /etc/busybox.conf; chmod 600 /etc/busybox.conf)
The busybox executable has to be owned by user root, group
root and has to be setuid root for this to work:
- (chown 0.0 /bin/busybox; chmod 4755 /bin/busybox)
+ (chown 0.0 /bin/busybox; chmod 4755 /bin/busybox)
Robert 'sandman' Griebl has more information here:
<url: http://www.softforge.de/bb/suid.html >.
default y
depends on FEATURE_SUID_CONFIG
help
- /etc/busybox.conf should be readable by the user needing the SUID, check
- this option to avoid users to be notified about missing permissions.
+ /etc/busybox.conf should be readable by the user needing the SUID,
+ check this option to avoid users to be notified about missing
+ permissions.
config SELINUX
bool "Support NSA Security Enhanced Linux"
default n
+ select PLATFORM_LINUX
help
- Enable support for SELinux in applets ls, ps, and id. Also provide
+ Enable support for SELinux in applets ls, ps, and id. Also provide
the option of compiling in SELinux applets.
If you do not have a complete SELinux userland installed, this stuff
- will not compile. Go visit
- http://www.nsa.gov/selinux/index.html
- to download the necessary stuff to allow busybox to compile with
- this option enabled. Specifially, libselinux 1.28 or better is
+ will not compile. Specifially, libselinux 1.28 or better is
directly required by busybox. If the installation is located in a
non-standard directory, provide it by invoking make as follows:
CFLAGS=-I<libselinux-include-path> \
default "/proc/self/exe"
help
When Busybox applets need to run other busybox applets, BusyBox
- sometimes needs to exec() itself. When the /proc filesystem is
+ sometimes needs to exec() itself. When the /proc filesystem is
mounted, /proc/self/exe always points to the currently running
- executable. If you haven't got /proc, set this to wherever you
+ executable. If you haven't got /proc, set this to wherever you
want to run BusyBox from.
# These are auto-selected by other options
config FEATURE_SYSLOG
- bool "Support for logging to syslog"
+ bool #No description makes it a hidden option
default n
- help
- This option is auto-selected when you select any applet which may
- send its output to syslog. You do not need to select it manually.
+ #help
+ # This option is auto-selected when you select any applet which may
+ # send its output to syslog. You do not need to select it manually.
config FEATURE_HAVE_RPC
- bool "RPC support"
+ bool #No description makes it a hidden option
default n
- help
- This is automatically selected if any of enabled applets need it.
- You do not need to select it manually.
+ #help
+ # This is automatically selected if any of enabled applets need it.
+ # You do not need to select it manually.
endmenu
Most people will leave this set to 'N'.
+config PIE
+ bool "Build BusyBox as a position independent executable"
+ default n
+ depends on !STATIC
+ help
+ Hardened code option. PIE binaries are loaded at a different
+ address at each invocation. This has some overhead,
+ particularly on x86-32 which is short on registers.
+
+ Most people will leave this set to 'N'.
+
+config NOMMU
+ bool "Force NOMMU build"
+ default n
+ help
+ Busybox tries to detect whether architecture it is being
+ built against supports MMU or not. If this detection fails,
+ or if you want to build NOMMU version of busybox for testing,
+ you may force NOMMU build here.
+
+ Most people will leave this set to 'N'.
+
+# PIE can be made to work with BUILD_LIBBUSYBOX, but currently
+# build system does not support that
config BUILD_LIBBUSYBOX
bool "Build shared libbusybox"
default n
+ depends on !FEATURE_PREFER_APPLETS && !PIE && !STATIC
help
- Build a shared library libbusybox.so which contains all
- libraries used inside busybox.
+ Build a shared library libbusybox.so.N.N.N which contains all
+ busybox code.
- This is an experimental feature intended to support the upcoming
- "make standalone" mode. Enabling it against the one big busybox
- binary serves no purpose (and increases the size). You should
- almost certainly say "no" to this right now.
+ This feature allows every applet to be built as a tiny
+ separate executable. Enabling it for "one big busybox binary"
+ approach serves no purpose and increases code size.
+ You should almost certainly say "no" to this.
### config FEATURE_FULL_LIBBUSYBOX
### bool "Feature-complete libbusybox"
### standalone application which uses libbusybox say 'Y'.
###
### Note: libbusybox is GPL, not LGPL, and exports no stable API that
-### might act as a copyright barrier. We can and will modify the
+### might act as a copyright barrier. We can and will modify the
### exported function set between releases (even minor version number
### changes), and happily break out-of-tree features.
###
config FEATURE_INDIVIDUAL
bool "Produce a binary for each applet, linked against libbusybox"
default y
- depends on !STATIC && BUILD_LIBBUSYBOX
+ depends on BUILD_LIBBUSYBOX
help
If your CPU architecture doesn't allow for sharing text/rodata
sections of running binaries, but allows for runtime dynamic
config FEATURE_SHARED_BUSYBOX
bool "Produce additional busybox binary linked against libbusybox"
default y
- depends on !STATIC && BUILD_LIBBUSYBOX
+ depends on BUILD_LIBBUSYBOX
help
Build busybox, dynamically linked against libbusybox.so.N.N.N.
config LFS
bool "Build with Large File Support (for accessing files > 2 GB)"
- default n
- select FDISK_SUPPORT_LARGE_DISKS
+ default y
help
If you want to build BusyBox with large file support, then enable
- this option. This will have no effect if your kernel or your C
- library lacks large file support for large files. Some of the
+ this option. This will have no effect if your kernel or your C
+ library lacks large file support for large files. Some of the
programs that can benefit from large file support include dd, gzip,
- cp, mount, tar, and many others. If you want to access files larger
- than 2 Gigabytes, enable this option. Otherwise, leave it set to 'N'.
+ cp, mount, tar, and many others. If you want to access files larger
+ than 2 Gigabytes, enable this option. Otherwise, leave it set to 'N'.
+
+config CROSS_COMPILER_PREFIX
+ string "Cross Compiler prefix"
+ default ""
+ help
+ If you want to build BusyBox with a cross compiler, then you
+ will need to set this to the cross-compiler prefix, for example,
+ "i386-uclibc-".
+
+ Note that CROSS_COMPILE environment variable or
+ "make CROSS_COMPILE=xxx ..." will override this selection.
+
+ Native builds leave this empty.
+
+config SYSROOT
+ string "Path to sysroot"
+ default ""
+ help
+ If you want to build BusyBox with a cross compiler, then you
+ might also need to specify where /usr/include and /usr/lib
+ will be found.
+
+ For example, BusyBox can be built against an installed
+ Android NDK, platform version 9, for ARM ABI with
+
+ CONFIG_SYSROOT=/opt/android-ndk/platforms/android-9/arch-arm
+
+ Native builds leave this empty.
+
+config EXTRA_CFLAGS
+ string "Additional CFLAGS"
+ default ""
+ help
+ Additional CFLAGS to pass to the compiler verbatim.
+
+config EXTRA_LDFLAGS
+ string "Additional LDFLAGS"
+ default ""
+ help
+ Additional LDFLAGS to pass to the linker verbatim.
+
+config EXTRA_LDLIBS
+ string "Additional LDLIBS"
+ default ""
+ help
+ Additional LDLIBS to pass to the linker with -l.
endmenu
default n
help
Say Y here if you wish to examine BusyBox internals while applets are
- running. This increases the size of the binary considerably, and
- should only be used when doing development. If you are doing
+ running. This increases the size of the binary considerably, and
+ should only be used when doing development. If you are doing
development and want to debug BusyBox, answer Y.
Most people should answer N.
+config DEBUG_PESSIMIZE
+ bool "Disable compiler optimizations"
+ default n
+ depends on DEBUG
+ help
+ The compiler's optimization of source code can eliminate and reorder
+ code, resulting in an executable that's hard to understand when
+ stepping through it with a debugger. This switches it off, resulting
+ in a much bigger executable that more closely matches the source
+ code.
+
+config DEBUG_SANITIZE
+ bool "Enable runtime sanitizers (ASAN/LSAN/USAN/etc...)"
+ default n
+ help
+ Say Y here if you want to enable runtime sanitizers. These help
+ catch bad memory accesses (e.g. buffer overflows), but will make
+ the executable larger and slow down runtime a bit.
+
+ If you aren't developing/testing busybox, say N here.
+
+config UNIT_TEST
+ bool "Build unit tests"
+ default n
+ help
+ Say Y here if you want to build unit tests (both the framework and
+ test cases) as a Busybox applet. This results in bigger code, so you
+ probably don't want this option in production builds.
+
config WERROR
bool "Abort compilation on any warning"
default n
Most people should answer N.
-# Seems to be unused
-#config DEBUG_PESSIMIZE
-# bool "Disable compiler optimizations."
-# default n
-# depends on DEBUG
-# help
-# The compiler's optimization of source code can eliminate and reorder
-# code, resulting in an executable that's hard to understand when
-# stepping through it with a debugger. This switches it off, resulting
-# in a much bigger executable that more closely matches the source
-# code.
-
choice
prompt "Additional debugging library"
default NO_DEBUG_LIB
help
Using an additional debugging library will make BusyBox become
- considerable larger and will cause it to run more slowly. You
+ considerable larger and will cause it to run more slowly. You
should always leave this option disabled for production use.
dmalloc support:
----------------
This enables compiling with dmalloc ( http://dmalloc.com/ )
which is an excellent public domain mem leak and malloc problem
- detector. To enable dmalloc, before running busybox you will
+ detector. To enable dmalloc, before running busybox you will
want to properly set your environment, for example:
export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
The 'debug=' value is generated using the following command
- dmalloc -p log-stats -p log-non-free -p log-bad-space -p log-elapsed-time \
- -p check-fence -p check-heap -p check-lists -p check-blank \
- -p check-funcs -p realloc-copy -p allow-free-null
+ dmalloc -p log-stats -p log-non-free -p log-bad-space \
+ -p log-elapsed-time -p check-fence -p check-heap \
+ -p check-lists -p check-blank -p check-funcs -p realloc-copy \
+ -p allow-free-null
Electric-fence support:
-----------------------
- This enables compiling with Electric-fence support. Electric
+ This enables compiling with Electric-fence support. Electric
fence is another very useful malloc debugging library which uses
your computer's virtual memory hardware to detect illegal memory
- accesses. This support will make BusyBox be considerable larger
+ accesses. This support will make BusyBox be considerable larger
and run slower, so you should leave this option disabled unless
you are hunting a hard to find memory problem.
endchoice
-config INCLUDE_SUSv2
- bool "Enable obsolete features removed before SUSv3?"
- default y
- help
- This option will enable backwards compatibility with SuSv2,
- specifically, old-style numeric options ('command -1 <file>')
- will be supported in head, tail, and fold. (Note: should
- affect renice too.)
-
endmenu
-menu 'Installation Options'
-
-config INSTALL_NO_USR
- bool "Don't use /usr"
- default n
- help
- Disable use of /usr. Don't activate this option if you don't know
- that you really want this behaviour.
+menu 'Installation Options ("make install" behavior)'
choice
- prompt "Applets links"
+ prompt "What kind of applet links to install"
default INSTALL_APPLET_SYMLINKS
help
- Choose how you install applets links.
+ Choose what kind of links to applets are created by "make install".
config INSTALL_APPLET_SYMLINKS
bool "as soft-links"
config INSTALL_APPLET_HARDLINKS
bool "as hard-links"
help
- Install applets as hard-links to the busybox binary. This might count
- on a filesystem with few inodes.
+ Install applets as hard-links to the busybox binary. This might
+ count on a filesystem with few inodes.
config INSTALL_APPLET_SCRIPT_WRAPPERS
bool "as script wrappers"
config INSTALL_APPLET_DONT
bool "not installed"
- depends on FEATURE_INSTALLER || FEATURE_SH_STANDALONE || FEATURE_PREFER_APPLETS
help
- Do not install applet links. Useful when using the -install feature
- or a standalone shell for rescue purposes.
+ Do not install applet links. Useful when you plan to use
+ busybox --install for installing links, or plan to use
+ a standalone shell and thus don't need applet links.
endchoice
config INSTALL_SH_APPLET_SCRIPT_WRAPPER
bool "as script wrapper"
help
- Install /bin/sh applet as script wrapper that call the busybox binary.
+ Install /bin/sh applet as script wrapper that calls
+ the busybox binary.
endchoice
source util-linux/Config.in
source miscutils/Config.in
source networking/Config.in
+source printutils/Config.in
+source mailutils/Config.in
source procps/Config.in
-source shell/Config.in
-source sysklogd/Config.in
source runit/Config.in
source selinux/Config.in
-source ipsvd/Config.in
+source shell/Config.in
+source sysklogd/Config.in