OpenSSL CHANGES
_______________
- Changes between 0.9.6d and 0.9.7 [XX xxx 2002]
+ Changes between 0.9.6h and 0.9.7 [XX xxx 2002]
+
+ *) Change from security patch (see 0.9.6e below) that did not affect
+ the 0.9.6 release series:
+
+ Remote buffer overflow in SSL3 protocol - an attacker could
+ supply an oversized master key in Kerberos-enabled versions.
+ (CAN-2002-0657)
+ [Ben Laurie (CHATS)]
+
+ *) Change the SSL kerb5 codes to match RFC 2712.
+ [Richard Levitte]
+
+ *) Make -nameopt work fully for req and add -reqopt switch.
+ [Michael Bell <michael.bell@rz.hu-berlin.de>, Steve Henson]
+
+ *) The "block size" for block ciphers in CFB and OFB mode should be 1.
+ [Steve Henson, reported by Yngve Nysaeter Pettersen <yngve@opera.com>]
+
+ *) Make sure tests can be performed even if the corresponding algorithms
+ have been removed entirely. This was also the last step to make
+ OpenSSL compilable with DJGPP under all reasonable conditions.
+ [Richard Levitte, Doug Kaufman <dkaufman@rahul.net>]
+
+ *) Add cipher selection rules COMPLEMENTOFALL and COMPLEMENTOFDEFAULT
+ to allow version independent disabling of normally unselected ciphers,
+ which may be activated as a side-effect of selecting a single cipher.
+
+ (E.g., cipher list string "RSA" enables ciphersuites that are left
+ out of "ALL" because they do not provide symmetric encryption.
+ "RSA:!COMPLEMEMENTOFALL" avoids these unsafe ciphersuites.)
+ [Lutz Jaenicke, Bodo Moeller]
+
+ *) Add appropriate support for separate platform-dependent build
+ directories. The recommended way to make a platform-dependent
+ build directory is the following (tested on Linux), maybe with
+ some local tweaks:
+
+ # Place yourself outside of the OpenSSL source tree. In
+ # this example, the environment variable OPENSSL_SOURCE
+ # is assumed to contain the absolute OpenSSL source directory.
+ mkdir -p objtree/"`uname -s`-`uname -r`-`uname -m`"
+ cd objtree/"`uname -s`-`uname -r`-`uname -m`"
+ (cd $OPENSSL_SOURCE; find . -type f -o -type l) | while read F; do
+ mkdir -p `dirname $F`
+ ln -s $OPENSSL_SOURCE/$F $F
+ done
+
+ To be absolutely sure not to disturb the source tree, a "make clean"
+ is a good thing. If it isn't successfull, don't worry about it,
+ it probably means the source directory is very clean.
+ [Richard Levitte]
*) Make sure any ENGINE control commands make local copies of string
pointers passed to them whenever necessary. Otherwise it is possible
handle the new API. Currently only ECB, CBC modes supported. Add new
AES OIDs.
- Add TLS AES ciphersuites as described in the "AES Ciphersuites
- for TLS" draft-ietf-tls-ciphersuite-06.txt. As these are not yet
- official, they are not enabled by default and are not even part
- of the "ALL" ciphersuite alias; for now, they must be explicitly
- requested by specifying the new "AESdraft" ciphersuite alias. If
- you want the default ciphersuite list plus the new ciphersuites,
- use "DEFAULT:AESdraft:@STRENGTH".
- [Ben Laurie, Steve Henson, Bodo Moeller]
+ Add TLS AES ciphersuites as described in RFC3268, "Advanced
+ Encryption Standard (AES) Ciphersuites for Transport Layer
+ Security (TLS)". (In beta versions of OpenSSL 0.9.7, these were
+ not enabled by default and were not part of the "ALL" ciphersuite
+ alias because they were not yet official; they could be
+ explicitly requested by specifying the "AESdraft" ciphersuite
+ group alias. In the final release of OpenSSL 0.9.7, the group
+ alias is called "AES" and is part of "ALL".)
+ [Ben Laurie, Steve Henson, Bodo Moeller]
*) New function OCSP_copy_nonce() to copy nonce value (if present) from
request to response.
*) Clean old EAY MD5 hack from e_os.h.
[Richard Levitte]
- Changes between 0.9.6d and 0.9.6e [XX xxx XXXX]
+ Changes between 0.9.6g and 0.9.6h [xx XXX xxxx]
+
+ *) Don't impose a 16-byte length minimum on session IDs in ssl/s3_clnt.c
+ (the SSL 3.0 and TLS 1.0 specifications allow any length up to 32 bytes).
+ [Bodo Moeller]
+
+ *) Fix initialization code race conditions in
+ SSLv23_method(), SSLv23_client_method(), SSLv23_server_method(),
+ SSLv2_method(), SSLv2_client_method(), SSLv2_server_method(),
+ SSLv3_method(), SSLv3_client_method(), SSLv3_server_method(),
+ TLSv1_method(), TLSv1_client_method(), TLSv1_server_method(),
+ ssl2_get_cipher_by_char(),
+ ssl3_get_cipher_by_char().
+ [Patrick McCormick <patrick@tellme.com>, Bodo Moeller]
+
+ *) Reorder cleanup sequence in SSL_CTX_free(): only remove the ex_data after
+ the cached sessions are flushed, as the remove_cb() might use ex_data
+ contents. Bug found by Sam Varshavchik <mrsam@courier-mta.com>
+ (see [openssl.org #212]).
+ [Geoff Thorpe, Lutz Jaenicke]
+
+ *) Fix typo in OBJ_txt2obj which incorrectly passed the content
+ length, instead of the encoding length to d2i_ASN1_OBJECT.
+ [Steve Henson]
+
+ Changes between 0.9.6f and 0.9.6g [9 Aug 2002]
+
+ *) [In 0.9.6g-engine release:]
+ Fix crypto/engine/vendor_defns/cswift.h for WIN32 (use '_stdcall').
+ [Lynn Gazis <lgazis@rainbow.com>]
+
+ Changes between 0.9.6e and 0.9.6f [8 Aug 2002]
+
+ *) Fix ASN1 checks. Check for overflow by comparing with LONG_MAX
+ and get fix the header length calculation.
+ [Florian Weimer <Weimer@CERT.Uni-Stuttgart.DE>,
+ Alon Kantor <alonk@checkpoint.com> (and others),
+ Steve Henson]
+
+ *) Use proper error handling instead of 'assertions' in buffer
+ overflow checks added in 0.9.6e. This prevents DoS (the
+ assertions could call abort()).
+ [Arne Ansper <arne@ats.cyber.ee>, Bodo Moeller]
+
+ Changes between 0.9.6d and 0.9.6e [30 Jul 2002]
+
+ *) Add various sanity checks to asn1_get_length() to reject
+ the ASN1 length bytes if they exceed sizeof(long), will appear
+ negative or the content length exceeds the length of the
+ supplied buffer.
+ [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
+
+ *) Fix cipher selection routines: ciphers without encryption had no flags
+ for the cipher strength set and where therefore not handled correctly
+ by the selection routines (PR #130).
+ [Lutz Jaenicke]
*) Fix EVP_dsa_sha macro.
[Nils Larsch]
applications.
[Bodo Moeller]
+ *) Changes in security patch:
+
+ Changes marked "(CHATS)" were sponsored by the Defense Advanced
+ Research Projects Agency (DARPA) and Air Force Research Laboratory,
+ Air Force Materiel Command, USAF, under agreement number
+ F30602-01-2-0537.
+
+ *) Add various sanity checks to asn1_get_length() to reject
+ the ASN1 length bytes if they exceed sizeof(long), will appear
+ negative or the content length exceeds the length of the
+ supplied buffer. (CAN-2002-0659)
+ [Steve Henson, Adi Stav <stav@mercury.co.il>, James Yonan <jim@ntlp.com>]
+
+ *) Assertions for various potential buffer overflows, not known to
+ happen in practice.
+ [Ben Laurie (CHATS)]
+
+ *) Various temporary buffers to hold ASCII versions of integers were
+ too small for 64 bit platforms. (CAN-2002-0655)
+ [Matthew Byng-Maddick <mbm@aldigital.co.uk> and Ben Laurie (CHATS)>
+
+ *) Remote buffer overflow in SSL3 protocol - an attacker could
+ supply an oversized session ID to a client. (CAN-2002-0656)
+ [Ben Laurie (CHATS)]
+
+ *) Remote buffer overflow in SSL2 protocol - an attacker could
+ supply an oversized client master key. (CAN-2002-0656)
+ [Ben Laurie (CHATS)]
+
Changes between 0.9.6c and 0.9.6d [9 May 2002]
*) Fix crypto/asn1/a_sign.c so that 'parameters' is omitted (not
value is 0.
[Richard Levitte]
- *) Add the configuration target linux-s390x.
- [Neale Ferguson <Neale.Ferguson@SoftwareAG-USA.com> via Richard Levitte]
-
*) [In 0.9.6d-engine release:]
Fix a crashbug and a logic bug in hwcrhk_load_pubkey().
[Toomas Kiisk <vix@cyber.ee> via Richard Levitte]
+ *) Add the configuration target linux-s390x.
+ [Neale Ferguson <Neale.Ferguson@SoftwareAG-USA.com> via Richard Levitte]
+
*) The earlier bugfix for the SSL3_ST_SW_HELLO_REQ_C case of
ssl3_accept (ssl/s3_srvr.c) incorrectly used a local flag
variable as an indication that a ClientHello message has been