======================================================================
-Changes for U-Boot 1.0.2:
+Changes since U-Boot 1.1.1:
======================================================================
+* Patch by Dave Peverley, 29 Apr 2004:
+ add MAC address detection to smc91111 driver
+
+* Patch by David Müller, 28 Apr 2004:
+ fix typo in lib_arm/board.c
+
+* Patch by Tolunay Orkun, 20 Apr 2004:
+ - README update: add CONFIG_CSB272 and csb272_config
+ - add descriptions for some MII/PHY options, CONFIG_I2CFAST, and
+ i2cfast environment variable
+
+* Patch by Yuli Barcohen, 19 Apr 2004:
+ - Rename DUET_ADS to MPC885ADS
+ - Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
+ - Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY
+ - Clean up FADS family port to use the new defines
+
+* Fix PCI support on CPC45 board
+
+* Patch by Scott McNutt, 25 Apr 2004:
+ Add Nios GDB/JTAG Console support:
+ - Add stubs to support gdb via JTAG.
+ - Add support for console over JTAG.
+ - Minor cleanup.
+
+* Add support for CATcenter board (based on PPChameleon ME module)
+
+* Patch by Klaus Heydeck, 12 May 2004:
+ Using external watchdog for KUP4 boards in mpc8xx/cpu.c;
+ load_sernum_ethaddr() for KUP4 boards in lib_ppc/board.c;
+ various changes to KUP4 board specific files
+
+* Fix minor network problem on MPC5200: need some delay between
+ resetting the PHY and sending the first packet. Implemented in a
+ "natural" way by invoking the PHY reset and initialization code
+ only once after power on vs. each time the interface is brought up.
+
+* Add some limited support for low-speed devices to SL811 USB controller
+ (at least "usb reset" now passes successfully and "usb info" displays
+ correct information)
+
+* Change init sequence for multiple network interfaces: initialize
+ on-chip interfaces before external cards.
+
+* Fix memory leak in the NAND-specific JFFS2 code
+
+* Fix SL811 USB controller when attached to a USB hub
+
+* Fix config option spelling in PM520 config file
+
+* Fix PHY discovery problem in cpu/mpc8xx/fec.c (introduced by
+ patches by Pantelis Antoniou, 30 Mar 2004)
+
+* Fix minor NAND JFFS2 related issue
+
+* Fixes for SL811 USB controller:
+ - implement workaround for broken memory stick
+ - improve error handling
+
+* Increase packet send timeout to 1 ms in cpu/mpc8xx/scc.c to better
+ cope with congested networks.
+
+======================================================================
+Changes for U-Boot 1.1.1:
+======================================================================
+
+* Patch by Travis Sawyer, 23 Apr 2004:
+ Fix VSC/CIS 8201 phy descrambler interoperability timing due to
+ errata from Vitesse Semiconductor.
+
+* Patch by Philippe Robin, 22 Apr 2004:
+ Fix ethernet configuration for "versatile" board
+
+* Patch by Kshitij Gupta, 21 Apr 2004:
+ Remove busy loop and use MPU timer fr usleep() on OMAP1510/1610 boards
+
+* Patch by Steven Scholz, 24 Feb 2004:
+ Fix a bug in AT91RM9200 ethernet driver:
+ The MII interface is now initialized before accessing the PHY.
+
+* Patch by John Kerl, 19 Apr 2004:
+ Use U-boot's miiphy.h for PHY register names, rather than
+ introducing a new header file.
+
+* Update pci_ids.h from linux-2.4.26
+
+* Patch by Masami Komiya, 19 Apr 2004:
+ Fix problem cause by VLAN function on little endian architecture
+ without VLAN environment
+
+* Clean up the TQM8xx_YYMHz configurations; allow to use the same
+ binary image for all clock frequencies. Implement run-time
+ optimization of flash access timing based on the actual bus
+ frequency.
+
+* Modify KUP4X board configuration to use SL811 driver for USB memory
+ sticks (including FAT / VFAT filesystem support)
+
+* Add SL811 Host Controller Interface driver for USB
+
+* Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README
+
+* Patch by Pantelis Antoniou, 19 Apr 2004:
+ Allow to use shell style syntax (i. e. ${var} ) with standard parser.
+ Minor patches for Intracom boards.
+
+* Patch by Christian Pell, 19 Apr 2004:
+ cleanup support for CF/IDE on PCMCIA for PXA25X
+
+* Temporarily disabled John Kerl's extended MII command code because
+ "miivals.h" is missing
+
+* Patches by Mark Jonas, 13 Apr 2004:
+ - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S
+ - Add sync instructions to IceCube SDRAM init code
+ - Move SDRAM chip constants into seperate include files
+ - Unify DDR and SDR initialization code
+ - Unify all IceCube (Lite5xxx) target names
+
+* Patch by John Kerl, 16 Apr 2004:
+ Enable ranges in mii command, e.g. mii read 0-1f 0 or
+ mii read 4-7 18-1a. Also add mii dump subcommand for
+ pretty-printing standard regs 0-5.
+
+* Patch by Stephen Williams, 16 April 2004:
+ fix typo in JSE.h; update MAINTAINERS
+
+* Patch by Matthew S. McClintock, 14 Apr 2004:
+ fix initdram function for utx8245 board
+
+* Patch by Markus Pietrek, 14 Apr 2004:
+ use ATAG_INITRD2 instead of deprecated ATAG_INITRD tag
+
+* Patch by Reinhard Meyer, 18 Apr 2004:
+ provide the IDE Reset Function for EMK 5200 boards
+
+* Patch by Masami Komiya, 12 Apr 2004:
+ fix pci_hose_write_config_{byte,word}_via_dword problems
+
+* Patch by Sangmoon Kim, 12 Apr 2004:
+ Update max RAM size for debris board
+
+* Patch by Travis Sawyer, 08 Apr 2004:
+ Add TLB entry for second DIMM slot on ocotea
+
+* Patch by Masami Komiya, 08 Apr 2004:
+ add RTL8169 network driver
+
+* Patch by Dan Malek, 07 Apr 2004:
+ - Add support for RPC/STx GP3, Motorola 8560 board
+ - Update 85xx TSEC driver so it searches MII for first available PHY
+ and uses that one.
+ - Add functions to support console MII commands.
+
+* Patch by Tolunay Orkun, 07 Apr 2004:
+ Move initialization of bi_iic_fast[]
+ from board_init_f() to board_init_r()
+
+* Patch by Yasushi Shoji, 07 Apr 2004:
+ Cleanup microblaze port
+
+* Patch by Sangmoon Kim, 07 Apr 2004:
+ Add auto SDRAM module detection for Debris board
+
+* Patch by Rune Torgersen, 06 Apr 2004:
+ - Fix some PCI problems on the MPC8266ADS board
+ - Fix the location of some PCI entries in the immap structure
+
+* Patch by Yasushi Shoji, 07 Apr 2004:
+ - add support for microblaze processors
+ - add support for AtmarkTechno "suzaku" board
+
+* Configure PPChameleon board to use redundand environment in flash
+
+* Configure PPChameleon board to use JFFS2 NAND support.
+
+* Added support for JFFS2 filesystem (read-only) on top of NAND flash
+
+* Patch by Rune Torgersen, 16 Apr 2004:
+ LBA48 fixes
+
+* Patches by Pantelis Antoniou, 16 Apr 2004:
+ - add support for a new version of an Intracom board and fix
+ various other things on others.
+ - add verify support to the crc32 command (define
+ CONFIG_CRC32_VERIFY to enable it)
+ - fix FEC driver for MPC8xx systems:
+ 1. fix compilation problems for boards that use dynamic
+ allocation of DPRAM
+ 2. shut down FEC after network transfers
+ - HUSH parser fixes:
+ 1. A new test command was added. This is a simplified version of
+ the one in the bourne shell.
+ 2. A new exit command was added which terminates the current
+ executing script.
+ 3. Fixed handing of $? (exit code of last executed command)
+ - Fix some compile problems;
+ add "once" functionality for the netretry variable
+
+* Patch by George G. Davis, 02 Apr 2004:
+ add support for Intel Assabet board
+
+* Patch by Stephen Williams, 01 Apr 2004:
+ Add support for Picture Elements JSE board
+
+* Patch by Christian Pell, 01 Apr 2004:
+ Add CompactFlash support for PXA systems.
+
+* Patches by Pantelis Antoniou, 30 Mar 2004:
+ - add auto-complete support to the U-Boot CLI
+ - add support for NETTA and NETPHONE boards; fix NETVIA board
+ - add support for the Epson 156x series of graphical displays
+ (These displays are serial and not suitable for using a normal
+ framebuffer console on them)
+ - add infrastructure needed in order to POST any DSPs in a board
+ - improve and fix various things in the MPC8xx FEC driver:
+ 1. The new 87x and 88x series of processors have two FECs,
+ and the new driver supports them both.
+ 2. Another change in the 87x/88x series is support for
+ the RMII (Reduced MII) interface. However numerous
+ changes are needed to make it work since the PHYs
+ are connected to the same lines. That means that
+ you have to address them correctly over the MII
+ interface.
+ 3. We now correctly match the MII/RMII interface
+ configuration to what the PHY reports.
+ - Fix problem when readingthe MII status register. Due to the
+ internal design of many PHYs you have to read the register
+ twice. The problem is more apparent in 10Mbit mode.
+ - add new mode ".jffs2s" for reading from a NAND device: it just
+ skips over bad blocks.
+ - add networking support for VLANs (802.1q), and CDP (Cisco
+ Discovery Protocol)
+ - some minor patches / cleanup
+
+* Patch by Yuli Barcohen, 28 Mar 2004:
+ - Add support for MPC8272 family including MPC8247/8248/8271/8272
+ - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS)
+ - Change configuration method for MPC8260ADS family
+
+* add startup code to clear the BSS of standalone applications
+
+* Fix if / elif handling bug in HUSH shell
+
+======================================================================
+Changes for U-Boot 1.1.0:
+======================================================================
+
+* Patch by Mark Jonas: Remove config.tmp files only when
+ unconfiguring the board
+
+* Adapt RMU board for bigger flash memory
+
+* Patch by Klaus Heydeck, 13 Mar 2003:
+ Add support for KUP4X Board
+
+* Patch by Pavel Bartusek, 21 Mar 2004
+ Add Reiserfs support
+
+* Patch by Hinko Kocevar, 20 Mar 2004
+ - Add auto-release for SMSC LAN91c111 driver
+ - Add save/restore of PTR and PNR regs as suggested in datasheet
+
+* Patch by Stephen Williams, 19 March 2004
+ Increase speed of sector reads from SystemACE,
+ shorten poll timeout and remove a useless reset
+
+* Patch by Tolunay Orkun, 19 Mar 2004:
+ Make GigE PHY 1000Mbps Speed/Duplex detection conditional
+ (CONFIG_PHY_GIGE)
+
+* Patch by Brad Kemp, 18 Mar 2004:
+ prevent machine checks during a PCI scan
+
+* Patch by Pierre Aubert, 18 Mar 2004:
+ Fix string cleaning in IDE identification
+
+* Patch by Pierre Aubert, 18 Mar 2004:
+ - Unify video mode handling for Chips & Technologies 69000 Video
+ chip and Silicon Motion SMI 712/710/810 Video chip
+ - Add selection of the video output (CRT or LCD) via 'videoout'
+ environment variable for the Silicon Motion
+ - README update
+
+* Patch by Pierre Aubert, 18 Mar 2004:
+ include/common.h typo fix
+
+* Patches by Tolunay Orkun, 17 Mar 2004:
+ - Add support for bd->bi_iic_fast[] initialization via environment
+ variable "i2cfast" (CONFIG_I2CFAST)
+ - Add "i2cfast" u-boot environment variable support for csb272
+
+* Patch by Carl Riechers, 17 Mar 2004:
+ Ignore '\0' characters in console input for use with telnet and
+ telco pads.
+
+* Patch by Leon Kukovec, 17 Mar 2004:
+ typo fix for strswab prototype #ifdef
+
* Patches by Thomas Viehweger, 16 Mar 2004:
- show PCI clock frequency on MPC8260 systems
- add FCC_PSMR_RMII flag for HiP7 processors
projects / oweals / u-boot.git / blobdiff