+======================================================================
+Changes since U-Boot 1.1.4:
+======================================================================
+
+* Add command for handling DDR ECC registers on MPC8349EE MDS board.
+
+* Fix DDR ECC bit definitions for MPC83xx.
+
+* Add initial support for MPC8349E MDS board.
+
+* Add support for ECC DDR initialization on MPC83xx.
+
+* Add DMA support for MPC83xx.
+
+* Add sync in do_reset() routine for MPC83xx after RPR register
+ was written to. It is need on some targets when BAT translation
+ is enabled.
+
+* Add bit definitions for MPC83xx DDR controller registers.
+
+* Add Dcbz(), Dcbi() and Dcbf() routines for MPC83xx.
+
+* Correct shift offsets in icache_status and dcache_status for MPC83xx.
+
+* Add support for DS1374 RTC chip.
+
+* Apply SoC concept to arm926ejs CPUs, i.e. move the SoC specific
+ timer and cpu_reset code from cpu/$(CPU) into the new
+ cpu/$(CPU)/$(SOC) directories
+ Patch by Andreas Engel, 13 Mar 2006
+
+* Change max size of uncompressed uImage's to 8MByte and add
+ CFG_BOOTM_LEN to adjust this setting.
+
+ As mentioned by Robin Getz on 2005-05-24 the size of uncompressed
+ uImages was restricted to 4MBytes. This default size is now
+ increased to 8Mbytes and can be overrided by setting CFG_BOOTM_LEN
+ in the board config file.
+
+ Patch by Stefan Roese, 13 Mar 2006
+
+* Fix problem with updated PCI code in cpu/ppc4xx/405gp_pci.c
+ Patch by Stefan Roese, 13 Mar 2006
+
+* cpu/ppc4xx/start.S : exceptions are enabled after relocation
+ Patch by Cedric Vincent, 06 Jul 2005
+
+* au1x00_eth.c: check malloc return value and abort if it failed
+ Patch by Andrew Dyer, 26 Jul 2005
+
+* Change the sequence of events in soft_i2c.c:send_ack() to keep from
+ incorrectly generating start/stop conditions on the bus.
+ Patch by Andrew Dyer, 26 Jul 2005
+
+* Fix bug in [id]cache_status commands for MPC85xx processors;
+ should look at LSB of L1CSRn registers to determine if L1 cache is
+ enabled, not the MSB.
+ Patch by Murray Jensen, 19 Jul 2005
+
+* Fix array overflow with fw_setenv on uninitialised environment
+ Patch by Murray Jensen, 15 Jul 2005
+
+* Add support for EmbeddedPlanet EP88x boards
+ Patch by Yuli Barcohen, 13 Jul 2005
+
+* Remove board specific configuration includes from the common xilinx
+ ethernet and iic adapter code.
+ Patch by Michael Libeskind, 12 Jul 2005
+
+* Add Nat Semi DP83865 PHY support to MPC85xx TSEC driver
+ Patch by Murray Jensen, 08 Jul 2005
+
+* Add (some) definitions for the MPC85xx local bus controller
+ Patch by Murray Jensen, 08 Jul 2005
+
+* Add CPM2 I/O pin functions for MPC85xx processors
+ Patch by Murray Jensen, 08 Jul 2005
+
+* Fix compile problem
+
+* Added PCI support for MPC8349ADS board
+ Patch by Kumar Gala 11 Jan 2006
+
+* Enable address translation on MPC83xx
+ Patch by Kumar Gala, 10 Feb 2006
+
+* Decopuled setting of OR/BR and LBLAWBAR/LBLAWAR on MPC83xx
+ Patch by Kumar Gala, 25 Jan 2006
+
+* Fixed defines for MPC83xx SICRL register to match current specs
+ Patch by Kumar Gala, 23 Jan 2006
+
+* Only disable the MPC83xx watchdog if its enabled out of reset.
+ If its disabled out of reset SW can later enable it if so desired
+ Patch by Kumar Gala, 11 Jan 2006
+
+* Allow config of GPIO direction & data registers at boot on 83xx
+ Patch by Kumar Gala, 11 Jan 2006
+
+* Enable time handling on 83xx
+ Patch by Kumar Gala, 11 Jan 2006
+
+* Make System IO Config Registers board configurable on MPC83xx
+ Patch by Kumar Gala, 11 Jan 2006
+
+* Fixed PCI indirect config ops to handle multiple PCI controllers
+ We need to adjust the bus number we are trying to access based
+ on which PCI controller its on
+ Patch by Kumar Gala, 12 Jan 2006
+
+* Report back PCI bus when doing table based device config
+ Patch by Kumar Gala, 11 Jan 2006
+
+* Added support for PCI prefetchable region and BARs
+ If a host controller sets up a region as prefetchable and
+ a device's BAR denotes it as prefetchable, allocate the
+ BAR into the prefetch region.
+
+ If a BAR is prefetchable and no prefetchable region has
+ been setup by the controller we fall back to allocating
+ the BAR into the normally memory region.
+ Patch by Kumar Gala, 11 Jan 2006
+
+* Add helper function for generic flat device tree fixups for mpc83xx
+ Patch by Kumar Gala, 11 Jan 2006
+
+* Add support for passing initrd information via flat device tree
+ Patch by Kumar Gala, 11 Jan 2006
+
+* Added OF_STDOUT_PATH and OF_SOC
+
+ OF_STDOUT_PATH specifies the path to the device the kernel can use
+ for console output
+
+ OF_SOC specifies the proper name of the SOC node if one exists.
+ Patch by Kumar Gala, 11 Jan 2006
+
+* Allow board code to fixup the flat device tree before booting a kernel
+ Patch by Kumar Gala, 11 Jan 2006
+
+* Added CONFIG_ options for bd_t and env in flat dev tree
+
+ CONFIG_OF_HAS_BD_T will put a copy of the bd_t
+ into the resulting flat device tree.
+
+ CONFIG_OF_HAS_UBOOT_ENV will copy the environment
+ variables from u-boot into the flat device tree
+
+ Patch by Kumar Gala, 11 Jan 2006
+
+* Add support for the DHCP vendor optional bootfile (#67).
+ Ignores the vendor TFTP server name option (#66).
+ Patch by Murray Jensen, 30 Jun 2005
+
+* Fix a HW timing issue on 8548 CDS for eTSEC 3 in RGMII mode
+ Patch by Andy Fleming, 14 Jun 2005
+
+* Fix bad register definitions for LTX971 PHY on MPC85xx boards.
+ Patch by Gerhard Jaeger, 21 Jun 2005
+
+* Add netconsole and some more commands to RPXlite_DW board
+ Patch by Sam Song, 19 Jun 2005
+
+* Fix bad declaration on pci_cfgfunc_nothing
+ Patch by Sam Song, 19 Jun 2005
+
+* Adjust "echo" as a default command
+ Patch by Sam Song, 19 Jun 2005
+
+* Fix PCIDF calculation in cpu/mpc8260/speed.c for MPC8280EC
+ Patch by KokHow Teh, 16 Jun 2005
+
+* Add crc of data to jffs2 (in jffs2_1pass_build_lists()).
+ Patch by Rick Bronson, 15 Jun 2005
+
+* Coding Style cleanup
+
+* Avoid dereferencing NULL in find_cmd() if no valid commands were found
+ Patch by Andrew Dyer, 13 Jun 2005
+
+* Add ADI Blackfin support
+ - add support for Analog Devices Blackfin BF533 CPU
+ - add support for the ADI BF533 Stamp uClinux board
+ - add support for the ADI BF533 EZKit board
+ Patches by Richard Klingler, 11 Jun 2005
+
+* Add loads of ntohl() in image header handling
+ Patch by Steven Scholz, 10 Jun 2005
+
+* Switch MPC86xADS and MPC885ADS boards to use cpuclk environment
+ variable to set clock
+ Patch by Yuli Barcohen, 05 Jun 2005
+
+* RPXlite configuration fixes
+ - Use correct flash sector size
+ - Use correct memory test end address
+ - Add support for bzip2 compression
+ - Various small fixes
+ Patch by Yuli Barcohen, 05 Jun 2005
+
+* Memory configuration changes for ZPC.1900 board
+ - Fix SDRAM timing on both local bus and 60x bus
+ - Add support for second flash bank (SIMM)
+ - Change boot flash base
+ Patch by Yuli Barcohen, 05 Jun 2005
+
+* Add support for Adder boards with 16MB SDRAM;
+ add support for second FEC on Adder87x board.
+ Patch by Yuli Barcohen, 05 Jun 2005
+
+* Fix conditional for including ks8695eth driver
+ Patch by Greg Ungerer, 04 Jun 2005
+
+* Fix Makefile: include config.mk only after CROSS_COMPILE is defined
+ Patch by Friedrich Lobenstock, 02 Jun 2005
+
+* Fix comment in common/soft_i2c.c
+ Patches by Peter Korsgaard/Tolunay Orkun, 26 May 2005
+
+* Cleanup compiler warnings.
+ Patch by Greg Ungerer, 21 May 2005
+
+* Word alignment fixes for word aligned NS16550 UART
+ Patch by Jean-Paul Saman, 01 Mar 2005
+
+ Fixes bug with UART that only supports word aligned access: removed
+ "__attribute__ ((packed));" for "(CFG_NS16550_REG_SIZE == 4)" some
+ (broken!) versions of GCC generate byte accesses when encountering
+ the packed attribute regardless if the struct is already correctly
+ aligned for a platform. Peripherals that can only handle word
+ aligned access won't work properly when accessed with byte access.
+ The struct NS16550 is already word aligned for REG_SIZE = 4, so
+ there is no need to packed the struct in that case.
+
+* Fix behaviour if gatewayip is not set
+ Patch by Robin Gilks, 23 Dec 2004
+
+* Fix cleanup for netstart board.
+ Remove build results from repository
+
+* Some code cleanup for GCC 4.x
+
+* Fixes to support environment in NAND flash;
+ enable NAND flash based environment for delta board.
+
+* Add support for Intel Monahans CPU on Zylonite and Delta boards
+ (This is Work in Progress!)
+
+* Add support for TQM8260-AI boards.
+
+* Minor code cleanup
+
+* Merge the new NAND code (testing-NAND brach); see doc/README.nand
+ Rewrite of NAND code based on what is in 2.6.12 Linux kernel
+ Patch by Ladislav Michl, 29 Jun 2005
+
+* Add lowboot target to mcc200 board
+ Patch by Stefan Roese, 4 Mar 2006
+
+* Fix problem with flash_get_size() from CFI driver update
+ Patch by Stefan Roese, 1 Mar 2006
+
+* Make CFG_NO_FLASH work on ARM systems
+ Patch by Markus Klotzbuecher, 27 Feb 2006
+
+* Update mcc200 config: Disable PCI and DoC, use 133 MHz IPB clock,
+ use hush shell.
+
+* Convert mcc200 to use common CFI flash driver
+ Patch by Stefan Roese, 28 Feb 2006
+
+* Add env-variable "unlock" to handle initial state of sectors
+ (locked/unlocked).
+
+ Only the U-Boot image and it's environment is protected,
+ all other sectors are unprotected (unlocked) if flash
+ hardware protection is used (CFG_FLASH_PROTECTION) and
+ the environment variable "unlock" is set to "yes".
+
+ Patch by Stefan Roese, 28 Feb 2006
+
+* Update drivers/cfi_flash.c:
+ - find_sector() called in both versions of flash_write_cfiword()
+ Patch by Peter Pearse, 27th Feb 2006
+
+* CFI support for a x8/x16 AMD/Spansion flash configured in x8 mode
+ Patch by Jose Maria Lopez, 16 Jan 2006
+
+* Add support for AMD/Spansion Flashes in flash_write_cfibuffer
+ Patch by Alex Bastos and Thomas Schaefer, 2005-08-29
+
+* Changes/fixes for drivers/cfi_flash.c:
+ We *should* check if there are any error bits if the previous call
+ returned ERR_OK (Otherwise we will have output an error message in
+ flash_status_check() already.) The original code would only check for
+ error bits if flash_status_check() returns ERR_TIMEOUT.
+ Patch by Marcus Hall, 23 Aug 2005
+
+* Changes/fixes for drivers/cfi_flash.c:
+ - Add CFG_FLASH_PROTECT_CLEAR on drivers/cfi_flash.c
+ - Prohibit buffer write when buffer_size is 1 on drivers/cfi_flash.c
+ Patch by Sangmoon Kim, 19 Aug 2005
+
+* Fixes for drivers/cfi_flash.c:
+ - Fix wrong timeout value usage in flash_status_check()
+ - Round write_tout up when converting to msec in flash_get_size()
+ - Remove clearing flash status at the end of flash_write_cfibuffer()
+ which sets Intel 28F640J3 flash back to command mode on CSB472
+ Patch by Tolunay Orkun, 02 July 2005
+
+* Add basic support for the SMMACO4 Board from PanDaCom.
+ Patch by Heiko Schocher, 20 Feb 2006
+
+* Add GIT version information (commid ID) to untagged U-Boot versions
+
+ As done in the linux kernel, the U-Boot version (U_BOOT_VERSION)
+ of all unreleased (untagged) U-Boot images will be automatically
+ extended upon compiletime with a part of the GIT commit ID and
+ possibly with "dirty" if uncommited changes are detected.
+
+ Here an example for the resulting version:
+ "U-Boot 1.1.4-g3457ac18-dirty"
+
+ The version is now maintained in the toplevel Makefile and the
+ version headers are autogenerated.
+
+ Patch by Stefan Roese, 9 Feb 2006
+
+* Update default environment for INKA4x00 board.
+
+* Convert CPCI750 to use common CFI flash driver
+ Patch by Reinhard Arlt, 8 Feb 2006
+
+* Various changes to esd HH405 board specific files
+ Patch by Matthias Fuchs, 07 Feb 2006
+
+* Cleanup U-Boot boot messages on ARM.
+
+ To match the U-Boot user interface on ARM platforms to the U-Boot
+ standard (as on PPC platforms), some messages with debug character
+ are removed from the default U-Boot build.
+ Enable DEBUG for lib_arm/board.c to enable debug messages.
+ New CONFIG_DISPLAY_CPUINFO and CONFIG_DISPLAY_BOARDINFO options.
+ Patch by Stefan Roese, 24 Jan 2006
+
+* Fix various compiler warnings on ppc4xx builds (ELDK 4.0)
+ Patch by Stefan Roese, 18 Jan 2006
+
+* Add VGA support (CT69000) to CPCI750 board.
+ Insert missing __le32_to_cpu() for filesize in ext2fs_read_file().
+ Patch by Reinhard Arlt, 30 Dec 2005
+
+* PMC405 and CPCI405: Moved configuration of pci resources
+ into config file.
+ PMC405 and CPCI2DP: Added firmware download and booting via pci.
+ Patch by Matthias Fuchs, 20 Dec 2005
+
+* Fix 28F256J3A support on PM520 board
+ (without bank-switching only 32 MB can be accessed)
+
+* Fix mkimage bug with multifile images created on 64 bit systems.
+
+* Add support for 28F256J3A flash (=> 64 MB) on PM520 board
+
+* Fix compiler problem with at91rm9200dk board.
+ Patch by Eugen Bigz, 19 Dec 2005
+
======================================================================
Changes for U-Boot 1.1.4:
======================================================================
+* Changes to Yellowstone & Yosemite 440EP/GR eval boards:
+ - Changed GPIO setup to enable another address line in order to
+ address 64M of FLASH.
+ - Added function sdram_tr1_set to auto calculate the tr1 value for
+ the DDR.
+ Patch by Steven Blakeslee, 12 Dec 2005
+
+* MPC5200: Set PCI retry counter to 0 = infinite retry;
+ The default of 255 is too short for slow devices.
+ Patch by Martin Nykodym, 12 Dec 2005
+
+* Change port configuration for O2DNT (CODEC1 on PSC1).
+
+* Fix register for PCI async mode on PPC440EP
+ Patch by Youngchul Bang, 08 Dec 2005
+
+* Fix U-Boot linking problems (add .eh_frame segment to linker script)
+ This segment may be required by some libgcc.a functions
+ (like _udivdi3).
+
+* Fix DPRAM offset/size for MPC8541/8555.
+ Simplify TQM85xx Makefile handling.
+
+* Fix data overflow (typo?) in rtc/ds1302.c
+
+* Fix U-Boot compilation for MIPS boards using ELDK 4.0
+
+* Add support for TQM8541/8555 boards, TQM85xx support reworked:
+ - Support for TQM8541/8555 boards added.
+ - Complete rework of TQM8540/8560 support.
+ - Common TQM85xx code now supports all current TQM85xx platforms
+ (TQM8540/8541/8555/8560).
+ - DDR SDRAM size detection added.
+ - CAS latency default values can be overwritten by setting "serial#"
+ to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used.
+ If problems are detected with this non default CAS latency,
+ the default values will be used instead.
+ - Flash size detection added.
+ - Moved FCC ethernet driver initialization behind TSEC driver init
+ -> TSEC is first device.
+ Patch by Stefan Roese, 30 Nov 2005
+
+* Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board.
+ Patch by John Otken, 23 Nov 2005
+
+* Changed PPC44x startup message (cpu info, speed...) to common style:
+ On PPC44x platforms, the startup message generated in "cpu.c" only
+ comprised the ppc type and revision but not additional information
+ like speed etc. Those speed infos where printed in the board specific
+ code. This new implementation now prints all CPU infos in the common
+ cpu specific code. No board specific code is needed anymore and
+ therefore removed from all current 44x implementations.
+ Patch by Stefan Roese, 27 Nov 2005
+
+* Adjust TQM834x PHY addresses for latest hardware revision.
+
+* Increase malloc arena on TQM5200 board to 256 kB.
+ With 64 kb uniform flash sector size the old value of 128 kB was
+ too small.
+
+* Fix miiphy global data initialization (problem on 4xx boards when
+ no ethaddr is assigned). Initialization moved from
+ miiphy_register() to eth_initialize().
+
+ Based on initial patch for 4xx platform by Matthias Fuchs.
+
+* Remove unnnecessary #include <linux/types.h> from include/asm-*/u-boot.h
+
+* Allow use of include/image.h and include/asm-*/u-boot.h in proprietary code.
+ The COPYING file was extended to make clear that these files can be
+ used in non-GPL code, too.
+ Also, a corresponding note was placed in the headers of the affected files.
+
+* Add support for Prodrive P3P440 board:
+ - Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c
+ - CFG_FLASH_QUIET_TEST added to use the common CFI driver
+ for bank autodetection
+ Patch by Stefan Roese, 22 Nov 2005
+
+* Change all '$(...)' variable references into '${...}'
+ which makes the environment compatible with the hush shell.
+ WARNING: Support for the old '$(...)' syntax will be
+ discontinued in a later version.
+
+* Minor changes to init flags in TQM834x PCI.
+
+* Fix Bamboo DDR SDRAM initialization (problem with onboard SDRAM)
+ Patch by Stefan Roese, 15 Nov 2005
+
+* New PPC 405EP board added: CMS700
+ Added CONFIG_NET_MULTI for VOM405 board.
+ Added reset_phy() for VOM405 board.
+ Patch by Matthias Fuchs, 09 Nov 2005
+
+* Updated PCI mapping for esd CPCI2DP board.
+ Add support for error LED.
+ Patch by Matthias Fuchs, 07 Nov 2005
+
+* Fix MPC85xx PCI support (pci_register_hose() before pci config access)
+ Patch by Stefan Roese, 07 Nov 2005
+
+* Correct PPC Timebase register definitions (SPRN_TBRL...)
+ Patch by Stefan Roese, 07 Nov 2005
+
+* Adjust bd->bi_flashstart on Yellowstone & Yosemite to correct size
+ Patch by Stefan Roese, 05 Nov 2005
+
+* Additional fix for external IRQ config on Yellowstone & Yosemite
+ Patch by Stefan Roese, 03 Nov 2005
+
+* Add support for Ocotea pass 3 with 440GX Rev. F
+ Patch by Stefan Roese, 01 Nov 2005
+
+* Fix external IRQ configuration on Yellowstone & Yosemite
+ Patch by Stefan Roese, 28 Oct 2005
+
+* Add support for multiple PHYs.
+ Tested on the following boards:
+ cmcpu2 (at91rm9200/ether.c)
+ PPChameleon (ppc4xx/4xx_enet.c)
+ yukon (mpc8220/fec.c)
+ uc100 (mpc8xx/fec.c)
+ tqm834x (mpc834x/tsec.c) with EEPRO100
+ lite5200 (mpc5xxx/fec.c) with EEPRO100 card (drivers/eepro100.c)
+ Main changes include:
+ common/miiphyutil.c
+ - miiphy_register routine was added to allow multiple PHYs to be registered
+ - miiphy_read and miiphy_write are now defined in this file, and
+ require additional argument (char *devname)
+ - other miiphy_* routines also require additional device name argument
+ ../lib_i386/board.c
+ ../lib_ppc/board.c
+ Calling reset_phy() was moved to be executed *after* eth_initialize().
+ This is necessary as now some of the implementations of reset_phy()
+ may need to use miiphy_reset() which is not allowed before eth_initialize()
+ as eth_initialize registers all required miiphy_* routines.
+ Tested on IP860 and PHY initializes properly after this change.
+
+* Correct includes for flat tree builder.
+
+* Fix conflicting types (flash_write()) in trab auto_update.c.
+
+* Add PCI support for the TQM834x board.
+
+* Add missing 4xx board to MAKEALL
+ Patch by Stefan Roese, 20 Oct 2005
+
+* Fix conflicting types (flash_write()) in esd auto_update.c
+ Patch by Stefan Roese, 20 Oct 2005
+
+* Fix problem with sleep in NetConsole (use get_timer())
+ Patch by Stefan Roese, 20 Oct 2005
+
+* Add NetConsole Support for AMCC eval boards
+ Patch by Stefan Roese, 20 Oct 2005
+
+* Fix NetConsole support on 4xx (only print eth link on 1st transfer)
+ Patch by Stefan Roese, 18 Oct 2005
+
+* Add fat & ext2 support to AMCC 440EP boards Yosemite & Bamboo.
+ Fix identation on ext2ls help entry.
+ Patch by Stefan Roese, 14 Oct 2005
+
+* Add support for TQM834x boards.
+ Cleanup.
+
+* Cleanup for GCC-4.x
+
+* Add documentation for Open Firmware Flat Tree and usage.
+ Patch by Pantelis Antoniou, 13 Oct 2005
+
+* Add missing files for Pantelis Antoniou's patch
+ Patch by Pantelis Antoniou, 04 Sep 2005
+
+* Fix problem in ppc4xx eth-driver without ethaddr (only without
+ CONFIG_NET_MULTI set)
+ Patch by Stefan Roese, 10 Oct 2005
+
+* Fix gzip bmp support (test if malloc fails, warning when truncated).
+ Increase CFG_VIDEO_LOGO_MAX_SIZE on HH405 board.
+ Patch by Stefan Roese, 07 Oct 2005
+
+* Add support for OF flat tree for the STXtc board.
+ Patch by Pantelis Antoniou, 04 Sep 2005
+
+* Support passing of OF flat trees to the kernel.
+ Patch by Pantelis Antoniou, 04 Sep 2005
+
+* Cleanup
+
+* Add support for NetSilicon NS7520 processor.
+ Patch by Art Shipkowski, 12 May 2005
+
+* Add support for AP1000 board.
+ Patch by James MacAulay, 07 Oct 2005
+
+* Eliminate hard-coded address of Ethernet transfer buffer on at91rm9200
+ Patch by Anders Larsen, 07 Oct 2005
+
+ The Atmel errata #11 states that the transfer buffer descriptor
+ table must be aligned on a 16-word boundary. As it turned out, this
+ is insufficient - it seems the table must be aligned on a boundary
+ at least as large as the table itself (in Linux this is not an
+ issue - the table is aligned on a PAGE_SIZE (4096) boundary).
+
+* Fixed compilation for ARM when using a (standard) hard-FP toolchain
+ Patch by Anders Larsen, 07 Oct 2005
+
+* Cleanup warnings for cpu/arm720t & cpu/arm1136 files.
+ sed the linker scripts, rather than pre-process them.
+ Patch by Peter Pearse, 07 Oct 2005
+
+* Update make target for ARM supported boards.
+ Use lowlevel_init() instead of platformsetup() [rename].
+ Patch by Peter Pearse, 06 Oct 2005
+
+* Fix booting from serial dataflash on AT91RM9200
+ Patch by Peter Menzebach, 29 Aug 2005
+
+* Add JFFS2 support for TRAB board
+ Patch by Martin Krause, 25 Aug 2005
+
+* Remove unnecessary dependency of netconsole on CONFIG_NET_MULTI
+ Patch by Marcus Hall, 24 Aug 2005
+
+* Fix the machine-id of the Cogent csb637 board
+ Patch by Anders Larsen, 05 Oct 2005
+
+* Complete support for the KwikByte KB920x boards
+ Patch by Anders Larsen, 05 Oct 2005
+
+* Set the AT91RM9200 clock to asynchronous mode
+ Patch by Anders Larsen, 03 May 2005
+
+* Set the AT91RM9200 clock to synchronous mode
+ Patch by Anders Larsen, 29 Apr 2005
+
+* Add support for Cogent csb637
+ Patch by Anders Larsen, 29 Apr 2005
+
+* Fix dm9161.c initialization
+ Patch by Anders Larsen, 29 Apr 2005
+
+* Fix problems introduced by Patch by Steven Scholz, 02 Mar 2005
+ (8e2be51de8dd03c1ce4d06cbb18ad06133d47cd5)
+
+* Move dm9161.c and lxt972.c into cpu/arm920t/at91rm9200
+ Patch by Anders Larsen, 29 Apr 2005
+
+* Fix device partition intialization for SystemACE disks.
+ Patch by Stephen Williams, 28 Apr 2005
+
+* Added support for KwikByte KB920x boards (based on AT91RM9200)
+ Patch by Matt ?? <kb9200_dev@kwikbyte.com>, 27 Apr 2005
+
+* Add support for S29GL064M-R3 flash chip on xsengine board
+ Patch by Kurt Stremerch, 18 Apr 2005
+
+* E500 update: repoint IVPR to RAM when code is relocated
+ Patch by Kylo Ginsberg, 13 Apr 2005
+
+* Fix loop end test in lib_generic/string.c:strswab()
+ Patch by Andrew Dyer, October 10, 2005
+ Signed-off-by: Andrew Dyer <amdyer@gmail.com>
+
+* Cleanup
+
+* Update ARM Integrator boards:
+ Correct addessing errors in platform files.
+ Split off common core module data from Integrator header files to
+ include/armcoremodule.h.
+ Patch by Peter Pearse, 04 Oct 2005
+
+* Make sure only supported compiler options are used
+ Import "cc-option" shell function from kernel and
+ use it to get the correct ARM GCC options for individual CPUs
+ Patch by Peter Pearse, 30 Jun 2005
+
+* Fix 440GR to print correct cpu revision
+ Patch by Stefan Roese, 04 Oct 2005
+
+* Change board message on AMCC Yosemite & Yellowstone to common style
+ Patch by Stefan Roese, 03 Oct 2005
+
* Fix compiler warning
* Fix FEC PHY addresses for TQM85xx boards