======================================================================
-Changes since U-Boot 0.3.1:
+Changes for U-Boot 0.4.4:
======================================================================
+* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
+
+* Add support for MGT5100 and MPC5200 processors
+
+* Patch by Lutz Dennig, 15 Jul 2003:
+ update for R360MPI board
+
+======================================================================
+Changes for U-Boot 0.4.3:
+======================================================================
+
+* Patches by Kshitij, 04 Jul 2003
+ - added support for arm925t cpu core
+ - added support for TI OMAP 1510 Innovator Board
+
+* Patches by Martin Krause, 14 Jul 2003:
+ - add I2C support for s3c2400 systems (trab board)
+ - (re-) add "ping" to command table
+
+* Fix handling of "slow" POST routines
+
+* Patches by Yuli Barcohen, 13 Jul 2003:
+ - Correct flash and JFFS2 support for MPC8260ADS
+ - fix PVR values and clock generation for PowerQUICC II family
+ (8270/8275/8280)
+
+* Patch by Bernhard Kuhn, 08 Jul 2003:
+ - add support for M68K targets
+
+* Patch by Ken Chou, 3 Jul:
+ - Fix PCI config table for A3000
+ - Fix iobase for natsemi.c
+ (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
+
+* Allow to enable "slow" POST routines by key press on power-on
+* Fix temperature dependend switching of LCD backlight on LWMON
+* Tweak output format for LWMON
+
+* Patch by Stefan Roese, 11 Jul 2003:
+ - Fix bug in CONFIG_VERSION_VARIABLE.
+ - AR405 config updated.
+ - OCRTC/ORSG: bsp command added.
+ - ASH405 bsp update.
+
+======================================================================
+Changes for U-Boot 0.4.2:
+======================================================================
+
+* Add support for NSCU board
+
+* Add support for TQM823M, TQM850M, TQM855M and TQM860M modules
+
+* Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML
+ mirror bit flash on TQM8xxM modules
+
+* Patch by Kenneth Johansson, 30 Jun 2003:
+ get rid of MK_CMD_ENTRY macro; update doc/README.command
+
+* Patch by Seb James, 30 Jun 2003:
+ Improve documentation of I2C configuration in README
+
+* Fix problems with previous log buffer "fixes"
+
+* Fix minor help text issues
+
+* "log append" did not append a newline
+
+======================================================================
+Changes for U-Boot 0.4.1:
+======================================================================
+
+* Fix some missing commands, cleanup header files
+ (autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
+
+* Rewrite command lookup and help command (fix problems with bubble
+ sort when sorting command name list). Minor cleanup here and there.
+
+* Merge from "stable branch", tag LABEL_2003_06_28_1800-stable:
+ - Allow to call sysmon function interactively
+ - PIC on LWMON board needs delay after power-on
+ - Add missing RSR definitions for MPC8xx
+ - Improve log buffer handling: guarantee clean reset after power-on
+ - Add support for EXBITGEN board
+ - Add support for SL8245 board
+
+* Code cleanup:
+ - remove trailing white space, trailing empty lines, C++ comments, etc.
+ - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
+
+* Patches by Kenneth Johansson, 25 Jun 2003:
+ - major rework of command structure
+ (work done mostly by Michal Cendrowski and Joakim Kristiansen)
+
+======================================================================
+Changes for U-Boot 0.4.0:
+======================================================================
+
+* Patches by Robert Schwebel, 26 Jun 2003:
+ - csb226 configuration updated
+ - credits for logodl port updated
+ - innokom configuration updated
+ - logodl tree update, still with coding style inconsistencies
+ - added OCM for ppc405 warning to README
+
+* Patch by Pantelis Antoniou, 25 Jun 2003:
+ update NetVia with V2 board support
+
+* Header file cleanup for ARM
+
+* Patch by Murray Jensen, 24 Jun 2003:
+ - make sure to use only U-boot provided header files
+ - fix problems with ".rodata.str1.4" section as used by GCC-3.x
+
+* Patch by Stefan Roese, 24 Jun 2003:
+ - Update esd ASH405 board files.
+ - Update esd DASA_SIM config file.
+ - Add ping command to some esd boards.
+
+* Patch by Yuli Barcohen, 23 Jun 2003:
+ Update for MPC8260ADS board
+
+* Patch by Murray Jensen, 23 Jun 2003:
+ - cleanup of GCC 3.x compiler warnings
+
+* Patch by Rune Torgersen, 4 Jun 2003:
+ add large memory support for MPC8266ADS board
+
+* Patch by Richard Woodruff, 19 June 03:
+ - Enabled standard u-boot device abstraction for ARM
+ - Enabled console device for ARM
+ - Initilized bi_baudrate for ARM
+
+* Patch by Bill Hargen, 23 Apr 2003:
+ fix byte order for 824x I2C addresses (write op)
+
+* Patch by Murray Jensen, 20 Jun 2003:
+ - hymod update
+ - cleanup (especially for gcc-3.x compilers)
+
+* Patch by Tom Guilliams, 20 Jun 2003:
+ added CONFIG_750FX support for IBM 750FX processors
+
+* Patch by Devin Crumb, 02 Apr 2003:
+ Fix clock divider rounding problem in drivers/serial.c
+
+* Patch by Richard Woodruff, 19 June 03:
+ - Fixed smc91c111 driver to sync with the u-boot environment
+ (driver/smc91c111.c).
+ - Added eth_init error return check in NetLoop (net/net.c).
+
+* Patch by Ken Chou, 19 June 2003:
+ Added support for A3000 SBC board (Artis Microsystems Inc.)
+
+* Patches by Murray Jensen, 17 Jun 2003:
+ - Hymod board database mods: add "who" field and new xilinx chip types
+ - provide new "init_cmd_timeout()" function so code external to
+ "common/main.c" can use the "reset_cmd_timeout()" function before
+ entering the main loop
+ - add DTT support for adm1021 (new file dtt/adm1021.c; config
+ slightly different. see include/configs/hymod.h for an example
+ (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
+ CFG_DTT_ADM1021 defined)
+ - add new "eeprom_probe()" function which has similar args and
+ behaves in a similar way to "eeprom_read()" etc.
+ - add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
+ function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
+ - gdbtools copyright update
+ - ensure that set_msr() executes the "sync" and "isync" instructions
+ after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
+ - 8260 I/O ports fix: Open Drain should be set last when configuring
+ - add SIU IRQ defines for 8260
+ - allow LDSCRIPT override and OBJCFLAGS initialization: change to
+ config.mk to allow board configurations to override the GNU
+ linker script, selected via the LDSCRIPT, make variable, and to
+ give an initial value to the OBJCFLAGS make variable
+ - 8260 i2c enhancement:
+ o correctly extends the timeout depending on the size of all
+ queued messages for both transmit and receive
+ o will not continue with receive if transmit times out
+ o ensures that the error callback is done for all queued tx
+ and rx messages
+ o correctly detects both tx and rx timeouts, only delivers one to
+ the callback, and does not overwrite an earlier error
+ o logic in i2c_probe now correct
+ - add "vprintf()" function so that "panic()" function can be
+ technically correct
+ - many Hymod board changes
+
+* Patches by Robert Schwebel, 14 Jun 2003:
+ - add support for Logotronic DL datalogger board
+ - cleanup serial line after kermit binary download
+ - add debugX macro (debug level support)
+ - update mach-types.h to latest arm.linux.org.uk master list.
+
+* Patches by David Müller, 12 Jun 2003:
+ - rewrite of the S3C24X0 register definitions stuff
+ - "driver" for the built-in S3C24X0 RTC
+
+* Patches by Yuli Barcohen, 12 Jun 2003:
+ - Add MII support and Ethernet PHY initialization for MPC8260ADS board
+ - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
+ configuration word supplied by FPGA on some MPC8260ADS boards
+
+* Patch by Pantelis Antoniou, 10 Jun 2003:
+ Unify status LED interface
+
+* Add support for DS12887 RTC; add RTC support for ATC board
+
+* Patch by Nicolas Lacressonniere, 11 Jun 2003:
+ Modifications for Atmel AT91RM9200DK ARM920T based development kit
+ - Add Atmel DataFlash support for reading and writing.
+ - Add possibility to boot a Linux from DataFlash with BOOTM command.
+ - Add Flash detection on Atmel AT91RM9200DK
+ (between Atmel AT49BV1614 and AT49BV1614A flashes)
+ - Replace old Ethernet PHY layer functions
+ - Change link address
+
+* Patch by Frank Smith, 9 Jun 2003:
+ use CRIT_EXCEPTION for machine check on 4xx
+
+* Patch by Detlev Zundel, 13 Jun 2003:
+ added implementation of the "carinfo" command in cmd_immap.c
+
+* Fix CONFIG_NET_MULTI support in include/net.h
+
+* Patches by Kyle Harris, 13 Mar 2003:
+ - Add FAT partition support
+ - Add command support for FAT
+ - Add command support for MMC
+ ----
+ - Add Intel PXA support for video
+ - Add Intel PXA support for MMC
+ ----
+ - Enable MMC and FAT for lubbock board
+ - Other misc changes for lubbock board
+
+* Patch by Robert Schwebel, April 02, 2003:
+ fix for SMSC91111 driver
+
* Patch by Vladimir Gurevich, 04 Jun 2003:
make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option
* TRAB fixes / extensions:
- Restore VFD brightness as saved in environment
- - add support for FGujitsu flashes
+ - add support for Fujitsu flashes
- make sure both buzzers are turned off (drive low level)
* Patches by Robert Schwebel, 06 Mar 2003: