+======================================================================
+Changes since U-Boot 1.1.1:
+======================================================================
+
+* Patch by Fred Klatt, 25 Jun 2004:
+ Add support for WindRiver's SBC8560 board
+
+* Patch by Nicolas Lacressonniere, 24 Jun 2004
+ Small Bugs fixes for "at91rm9200dk" board:
+ - Timing modifications for SPI DataFlash access
+ - Fix NAND flash detection bug
+
+* Patch by Nicolas Lacressonniere, 24 Jun 2004:
+ Add Support for Flash AT49BV6416 for AT91RM9200DK board
+
+* Patch by Jon Loeliger, 17 June 2004:
+ Completion of the 8540ADS/8560ADS updates:
+ Fix some PCI and Rapid I/O memory maps,
+ Initialize both TSEC 1 and 2,
+ Initialize SDRAM
+ Update MAINTAINER for 85xx boards and README.mpc85xxads
+
+* Patch by Yuli Barcohen, 16 Jun 2004:
+ Remove obsolete AdderII port which was superseded by unified
+ AdderII/Adder87x port
+
+* Patch by Ladislav Michl, 16 Jun 2004:
+ Fix gcc-3.3.3 warnings for smc91111.c
+
+* Patch by Stefan Roese, 02 Jul 2004:
+ - Fix bug in 405 ethernet driver; allocated data not cleared!
+ - Fix problem in 405 i2c driver; don't try to print without console!
+
+* Patch by Paul Ruhland, 11 Jun 2004:
+ Remove debug code from 'board/lpd7a40x/flash.c'
+
+* Patch by Andrea Marson, 11 Jun 2004:
+ Update for PPChameleon board:
+ - support for SysClk @ 25MHz
+ - support for Silicon Motion SM712 VGA controller
+ - some clean ups
+
+* Patches by Richard Woodruff, 10 Jun 2004:
+ - fix problems with examples/stubs.c for GCC >= 3.4
+ - fix problems with gd initialization
+
+* Patch by Curt Brune, 17 May 2004:
+ - Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
+ - Add support for ESPD-Inc. EVB4510 Board
+
+* Patch by Marc Leeman, 11 May 2004:
+ Fix for MPC8245 - reading PPC Memory from another device with the
+ PPC as PCI target device corrupts data due to interenal hardware
+ buffering.
+
+* Fix "cls" command when used with splash screen
+
+* Increase NFS download timeout (now 1 min - 10 sec is to short for a
+ slow download of a big image)
+
+* Add "cls" function to MPC823 LCD driver so we can reinitialize the
+ display even after showing a bitmap
+
+* Patch by Josef Wagner, 04 Jun 2004:
+ - DDR Ram support for PM520 (MPC5200)
+ - support for different flash types (PM520)
+ - USB / IDE / CF-Card / DiskOnChip support for PM520
+ - 8 bit boot rom support for PM520/CE520
+ - Add auto SDRAM module detection for MicroSys CPC45 board (MPC8245)
+ - I2C and RTC support for CPC45
+ - support of new flash type (28F160C3T) for CPC45
+
+* Fix flash parameters passed to Linux for PPChameleon board
+
+* Remove eth_init() from lib_arm/board.c; it's done in net.net.c.
+
+* Patch by Paul Ruhland, 10 Jun 2004:
+ fix support for Logic SDK-LH7A404 board and clean up the
+ LH7A404 register macros.
+
+* Patch by Matthew McClintock, 10 Jun 2004:
+ Modify code to select correct serial clock on Sandpoint8245
+
+* Patch by Robert Schwebel, 10 Jun 2004:
+ Add support for Intel K3 strata flash.
+
+* Patch by Thomas Brand, 10 Jun 2004:
+ Fix "loads" command on DK1S10 board
+
+* Patch by Yuli Barcohen, 09 Jun 2004:
+ Add support for 8MB flash SIMM and JFFS2 file system on
+ Motorola FADS board and its derivatives (MPC86xADS, MPC885ADS).
+
+* Patch by Yuli Barcohen, 09 Jun 2004:
+ Add support for Analogue&Micro Adder87x and the older AdderII board.
+
+* Patch by Ming-Len Wu, 09 Jun 2004:
+ Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board
+
+* Patch by Sam Song, 09 Jun 2004:
+ - Add support for RPXlite_DW board
+ - Update FLASH driver for 4*AM29DL323DB90VI
+ - Add option configuration of CFG_ENV_IS_IN_NVRAM on RPXlite_DW board
+
+* Patch by Mark Jonas, 08 June 2004:
+ - Make MPC5200 boards evaluate the SVR to print processor name and
+ version in checkcpu() (cpu/mpc5xxx/cpu.c).
+
+* Patch by Kai-Uwe Bloem, 06 May 2004:
+ Fix endianess problem in cramfs code
+
+* Patch by Tom Armistead, 04 Jun 2004:
+ Add support for MAX6900 RTC
+
+* Patches by Ladislav Michl, 03 Jun 2004:
+ - fix cfi_flash.c on LE systems
+ - let 'make mrproper' delete u-boot.img as well
+ - turn printf into debug in cfi_flash.c
+
+* Patch by Kurt Stremerch, 28 May 2004:
+ Add support for Exys XSEngine board
+
+* Patch by Martin Krause, 27 May 2004:
+ Fix a MPC5xxx I2C timing issue in i2c_probe().
+
+* Patch by Leif Lindholm, 27 May 2004:
+ Fix board_init_f() for dbau1x00 board.
+
+* Patch by Imre Deak, 26 May 2004:
+ On OMAP1610 platforms check if booting from RAM(CS0) or flash(CS3).
+ Set flash base accordingly, and decide whether to do or skip board
+ specific setup steps.
+
+* Patch by Josef Baumgartner, 26 May 2004:
+ Add missing define in include/asm-m68k/global_data.h
+
+* Patch by Josef Baumgartner, 25 May 2004:
+ Add missing functions get_ticks() and get_tbclk() in lib_m68k/time.c
+
+* Patch by Paul Ruhland, 24 May 2004:
+ fix SDRAM initialization for LPD7A400 board.
+
+* Patch by Jian Zhang, 20 May 2004:
+ add support for environment in NAND flash
+
+* Patch by Yuli Barcohen, 20 May 2004:
+ Add support for Interphase iSPAN boards.
+
+* Patches by Paul Ruhland, 17 May 2004:
+ - Add I/O functions to the smc91111 ethernet driver to support the
+ Logic LPD7A40x boards.
+ - Add support for the Logic Zoom LH7A40x based SDK board(s),
+ specifically the LPD7A400.
+
+* Patches by Robert Schwebel, 15 May 2004:
+ - call MAC address reading code also for SMSC91C111;
+ - make SMSC91C111 timeout configurable, remove duplicate code
+ - fix get_timer() for PXA
+ - update doc/README.JFFS2
+ - use "bootfile" env variable also for jffs2
+
+* Patch by Tolunay Orkun, 14 May 2004:
+ Add support for Cogent CSB472 board (8MB Flash Rev)
+
+* Patch by Thomas Viehweger, 14 May 2004:
+ - flash.h: more flash types added
+ - immap_8260.h: some bits added (useful for RMII)
+ - cmd_coninfo.c: typo corrected, printf -> puts
+ - reduced size by replacing spaces with tab
+
+* Patch by Robert Schwebel, 13 May 2004:
+ Add 'imgextract' command: extract one part of a multi file image.
+
+* Patches by Jon Loeliger, 11 May 2004:
+ Dynamically handle REV1 and REV2 MPC85xx parts.
+ (Jon Loeliger, 10-May-2004).
+ New consistent memory map and Local Access Window across MPC85xx line.
+ New CCSRBAR at 0xE000_0000 now.
+ Add RAPID I/O memory map.
+ New memory map in README.MPC85xxads
+ (Kumar Gala, 10-May-2004)
+ Better board and CPU identification on MPC85xx boards at boot.
+ (Jon Loeliger, 10-May-2004)
+ SDRAM clock control fixes on MPC8540ADS & MPC8560 boards.
+ Some configuration options for MPC8540ADS & MPC8560ADS cleaned up.
+ (Jim Robertson, 10-May-2004)
+ Rewrite of the MPC85xx Three Speed Ethernet Controller (TSEC) driver.
+ Supports multiple PHYs.
+ (Andy Fleming, 10-May-2004)
+ Some README.MPC85xxads updates.
+ (Kumar Gala, 10-May-2004)
+ Copyright updates for "Freescale"
+ (Andy Fleming, 10-May-2004)
+
+* Patch by Stephen Williams, 11 May 2004:
+ Add flash support for ST M29W040B
+ Reduce JSE specific flash.c to remove dead code.
+
+* Patch by Markus Pietrek, 04 May 2004:
+ Fix clear_bss code for ARM systems (all except s3c44b0 which
+ doesn't clear BSS at all?)
+
+* Fix "ping" problem on INC-IP board. Strange problem:
+ Sometimes the store word instruction hangs while writing to one of
+ the Switch registers, but only if the next instruction is 16-byte
+ aligned. Moving the instruction into a separate function somehow
+ makes the problem go away.
+
+* Patch by Rishi Bhattacharya, 08 May 2004:
+ Add support for TI OMAP5912 OSK Board
+
+* Patch by Sam Song May, 07 May 2004:
+ Fix typo of UPM table for rmu board
+
+* Patch by Pantelis Antoniou, 05 May 2004:
+ - Intracom board update.
+ - Add Codec POST.
+
+* Add support for the second Ethernet interface for the 'PPChameleon'
+ board.
+
+* Patch by Dave Peverley, 30 Apr 2004:
+ Add support for OMAP730 Perseus2 Development board
+
+* Patch by Alan J. Luse, 29 Apr 2004:
+ Fix flash chip-select (OR0) option register setting on FADS boards.
+
+* Patch by Alan J. Luse, 29 Apr 2004:
+ Report MII network speed and duplex setting properly when
+ auto-negotiate is not enabled.
+
+* Patch by Jarrett Redd, 29 Apr 2004:
+ Fix hang on reset on Ocotea board due to flash in wrong mode.
+
+* Patch by Dave Peverley, 29 Apr 2004:
+ add MAC address detection to smc91111 driver
+
+* Patch by David Müller, 28 Apr 2004:
+ fix typo in lib_arm/board.c
+
+* Patch by Tolunay Orkun, 20 Apr 2004:
+ - README update: add CONFIG_CSB272 and csb272_config
+ - add descriptions for some MII/PHY options, CONFIG_I2CFAST, and
+ i2cfast environment variable
+
+* Patch by Yuli Barcohen, 19 Apr 2004:
+ - Rename DUET_ADS to MPC885ADS
+ - Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
+ - Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY
+ - Clean up FADS family port to use the new defines
+
+* Fix PCI support on CPC45 board
+
+* Patch by Scott McNutt, 25 Apr 2004:
+ Add Nios GDB/JTAG Console support:
+ - Add stubs to support gdb via JTAG.
+ - Add support for console over JTAG.
+ - Minor cleanup.
+
+* Add support for CATcenter board (based on PPChameleon ME module)
+
+* Patch by Klaus Heydeck, 12 May 2004:
+ Using external watchdog for KUP4 boards in mpc8xx/cpu.c;
+ load_sernum_ethaddr() for KUP4 boards in lib_ppc/board.c;
+ various changes to KUP4 board specific files
+
+* Fix minor network problem on MPC5200: need some delay between
+ resetting the PHY and sending the first packet. Implemented in a
+ "natural" way by invoking the PHY reset and initialization code
+ only once after power on vs. each time the interface is brought up.
+
+* Add some limited support for low-speed devices to SL811 USB controller
+ (at least "usb reset" now passes successfully and "usb info" displays
+ correct information)
+
+* Change init sequence for multiple network interfaces: initialize
+ on-chip interfaces before external cards.
+
+* Fix memory leak in the NAND-specific JFFS2 code
+
+* Fix SL811 USB controller when attached to a USB hub
+
+* Fix config option spelling in PM520 config file
+
+* Fix PHY discovery problem in cpu/mpc8xx/fec.c (introduced by
+ patches by Pantelis Antoniou, 30 Mar 2004)
+
+* Fix minor NAND JFFS2 related issue
+
+* Fixes for SL811 USB controller:
+ - implement workaround for broken memory stick
+ - improve error handling
+
+* Increase packet send timeout to 1 ms in cpu/mpc8xx/scc.c to better
+ cope with congested networks.
+
======================================================================
Changes for U-Boot 1.1.1:
======================================================================
+* Patch by Travis Sawyer, 23 Apr 2004:
+ Fix VSC/CIS 8201 phy descrambler interoperability timing due to
+ errata from Vitesse Semiconductor.
+
+* Patch by Philippe Robin, 22 Apr 2004:
+ Fix ethernet configuration for "versatile" board
+
+* Patch by Kshitij Gupta, 21 Apr 2004:
+ Remove busy loop and use MPU timer fr usleep() on OMAP1510/1610 boards
+
+* Patch by Steven Scholz, 24 Feb 2004:
+ Fix a bug in AT91RM9200 ethernet driver:
+ The MII interface is now initialized before accessing the PHY.
+
+* Patch by John Kerl, 19 Apr 2004:
+ Use U-boot's miiphy.h for PHY register names, rather than
+ introducing a new header file.
+
+* Update pci_ids.h from linux-2.4.26
+
+* Patch by Masami Komiya, 19 Apr 2004:
+ Fix problem cause by VLAN function on little endian architecture
+ without VLAN environment
+
+* Clean up the TQM8xx_YYMHz configurations; allow to use the same
+ binary image for all clock frequencies. Implement run-time
+ optimization of flash access timing based on the actual bus
+ frequency.
+
+* Modify KUP4X board configuration to use SL811 driver for USB memory
+ sticks (including FAT / VFAT filesystem support)
+
+* Add SL811 Host Controller Interface driver for USB
+
+* Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README
+
+* Patch by Pantelis Antoniou, 19 Apr 2004:
+ Allow to use shell style syntax (i. e. ${var} ) with standard parser.
+ Minor patches for Intracom boards.
+
+* Patch by Christian Pell, 19 Apr 2004:
+ cleanup support for CF/IDE on PCMCIA for PXA25X
+
+* Temporarily disabled John Kerl's extended MII command code because
+ "miivals.h" is missing
+
+* Patches by Mark Jonas, 13 Apr 2004:
+ - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S
+ - Add sync instructions to IceCube SDRAM init code
+ - Move SDRAM chip constants into seperate include files
+ - Unify DDR and SDR initialization code
+ - Unify all IceCube (Lite5xxx) target names
+
+* Patch by John Kerl, 16 Apr 2004:
+ Enable ranges in mii command, e.g. mii read 0-1f 0 or
+ mii read 4-7 18-1a. Also add mii dump subcommand for
+ pretty-printing standard regs 0-5.
+
+* Patch by Stephen Williams, 16 April 2004:
+ fix typo in JSE.h; update MAINTAINERS
+
+* Patch by Matthew S. McClintock, 14 Apr 2004:
+ fix initdram function for utx8245 board
+
+* Patch by Markus Pietrek, 14 Apr 2004:
+ use ATAG_INITRD2 instead of deprecated ATAG_INITRD tag
+
+* Patch by Reinhard Meyer, 18 Apr 2004:
+ provide the IDE Reset Function for EMK 5200 boards
+
+* Patch by Masami Komiya, 12 Apr 2004:
+ fix pci_hose_write_config_{byte,word}_via_dword problems
+
+* Patch by Sangmoon Kim, 12 Apr 2004:
+ Update max RAM size for debris board
+
+* Patch by Travis Sawyer, 08 Apr 2004:
+ Add TLB entry for second DIMM slot on ocotea
+
+* Patch by Masami Komiya, 08 Apr 2004:
+ add RTL8169 network driver
+
+* Patch by Dan Malek, 07 Apr 2004:
+ - Add support for RPC/STx GP3, Motorola 8560 board
+ - Update 85xx TSEC driver so it searches MII for first available PHY
+ and uses that one.
+ - Add functions to support console MII commands.
+
+* Patch by Tolunay Orkun, 07 Apr 2004:
+ Move initialization of bi_iic_fast[]
+ from board_init_f() to board_init_r()
+
+* Patch by Yasushi Shoji, 07 Apr 2004:
+ Cleanup microblaze port
+
+* Patch by Sangmoon Kim, 07 Apr 2004:
+ Add auto SDRAM module detection for Debris board
+
+* Patch by Rune Torgersen, 06 Apr 2004:
+ - Fix some PCI problems on the MPC8266ADS board
+ - Fix the location of some PCI entries in the immap structure
+
+* Patch by Yasushi Shoji, 07 Apr 2004:
+ - add support for microblaze processors
+ - add support for AtmarkTechno "suzaku" board
+
+* Configure PPChameleon board to use redundand environment in flash
+
+* Configure PPChameleon board to use JFFS2 NAND support.
+
+* Added support for JFFS2 filesystem (read-only) on top of NAND flash
+
+* Patch by Rune Torgersen, 16 Apr 2004:
+ LBA48 fixes
+
+* Patches by Pantelis Antoniou, 16 Apr 2004:
+ - add support for a new version of an Intracom board and fix
+ various other things on others.
+ - add verify support to the crc32 command (define
+ CONFIG_CRC32_VERIFY to enable it)
+ - fix FEC driver for MPC8xx systems:
+ 1. fix compilation problems for boards that use dynamic
+ allocation of DPRAM
+ 2. shut down FEC after network transfers
+ - HUSH parser fixes:
+ 1. A new test command was added. This is a simplified version of
+ the one in the bourne shell.
+ 2. A new exit command was added which terminates the current
+ executing script.
+ 3. Fixed handing of $? (exit code of last executed command)
+ - Fix some compile problems;
+ add "once" functionality for the netretry variable
+
+* Patch by George G. Davis, 02 Apr 2004:
+ add support for Intel Assabet board
+
+* Patch by Stephen Williams, 01 Apr 2004:
+ Add support for Picture Elements JSE board
+
+* Patch by Christian Pell, 01 Apr 2004:
+ Add CompactFlash support for PXA systems.
+
* Patches by Pantelis Antoniou, 30 Mar 2004:
- add auto-complete support to the U-Boot CLI
- add support for NETTA and NETPHONE boards; fix NETVIA board
(These displays are serial and not suitable for using a normal
framebuffer console on them)
- add infrastructure needed in order to POST any DSPs in a board
+ - improve and fix various things in the MPC8xx FEC driver:
+ 1. The new 87x and 88x series of processors have two FECs,
+ and the new driver supports them both.
+ 2. Another change in the 87x/88x series is support for
+ the RMII (Reduced MII) interface. However numerous
+ changes are needed to make it work since the PHYs
+ are connected to the same lines. That means that
+ you have to address them correctly over the MII
+ interface.
+ 3. We now correctly match the MII/RMII interface
+ configuration to what the PHY reports.
+ - Fix problem when readingthe MII status register. Due to the
+ internal design of many PHYs you have to read the register
+ twice. The problem is more apparent in 10Mbit mode.
+ - add new mode ".jffs2s" for reading from a NAND device: it just
+ skips over bad blocks.
+ - add networking support for VLANs (802.1q), and CDP (Cisco
+ Discovery Protocol)
+ - some minor patches / cleanup
* Patch by Yuli Barcohen, 28 Mar 2004:
- Add support for MPC8272 family including MPC8247/8248/8271/8272