+commit f9476902b789b0481b9df49af88d6ca94fb16fa0
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Dec 15 12:10:47 2009 -0600
+
+ mpc85xx, mpc86xx: Fix gd->cpu pointer after relocation
+
+ The gd->cpu pointer is set to an address located in flash when the
+ probecpu() function is called while U-Boot is executing from flash.
+ This pointer needs to be updated to point to an address in RAM after
+ relocation has occurred otherwise Linux may not be able to boot due to
+ "fdt board" crashing if flash has been erased or changed.
+
+ This bug was introduced in commit
+ a0e2066f392782730f0398095e583c87812d97f2.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Reported-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Tested-by: Kumar Gala <galak@kernel.crashing.org>
+ Tested on MPC8527DS.
+ Tested by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 3363a34b9eeda9783afcbbed5cdd738926d1f4bf
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sun Dec 13 17:58:34 2009 -0600
+
+ MVBLUE: Remove CONFIG_CMD_IRQ
+
+ Neither the MVBLUE nor its underlying architecture implement the
+ do_irqinfo() function which is required when CONFIG_CMD_IRQ is defined.
+ This change fixes the following MVBLUE compiler error:
+
+ -> ./MAKEALL MVBLUE
+ Configuring for MVBLUE board...
+ common/libcommon.a(cmd_irq.o):(.u_boot_cmd+0x24): undefined reference to `do_irqinfo'
+ make: *** [u-boot] Error 1
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Acked-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+
+commit 18e8ad60ee87431c01cc2686985b60cc54f5dd3b
+Author: Detlev Zundel <dzu@denx.de>
+Date: Mon Dec 14 17:54:40 2009 +0100
+
+ imx27lite: Reenable MTD support on NOR flash.
+
+ The support for this was silently dropped by a configuration
+ split during the merge of the imx27lite board support in commit
+ 864aa034f3a0e10ce710e8bbda171df3cab59414 (cmd_mtdparts: Move to common
+ handling of FLASH devices via MTD layer).
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit f4cfe42758192d09f8375e384cc000aa70d97029
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Dec 9 09:01:43 2009 +0100
+
+ nand: Fix access to last block in NAND devices
+
+ Currently, the last block of NAND devices can't be accessed. This patch
+ fixes this issue by correcting the boundary checking (off-by-one error).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Scott Wood <scottwood@freescale.com>
+ Cc: Wolfgang Denk <wd@denx.de>
+
+commit 3b887ca8ce72cc12129183538f6e828db13f4867
+Author: Peter Korsgaard <jacmet@sunsite.dk>
+Date: Tue Dec 8 22:20:34 2009 +0100
+
+ mpc83xx: boot time regression, move LCRR setup back to cpu_init_f
+
+ Commit c7190f02 (retain POR values of non-configured ACR, SPCR, SCCR,
+ and LCRR bitfields) moved the LCRR assignment to after relocation
+ to RAM because of the potential problem with changing the local bus
+ clock while executing from flash.
+
+ This change unfortunately adversely affects the boot time, as running
+ all code up to cpu_init_r can cause significant slowdown.
+
+ E.G. on a 8347 board a bootup time increase of ~600ms has been observed:
+
+ 0.020 CPU: e300c1, MPC8347_PBGA_EA, Rev: 3.0 at 400 MHz, CSB: 266.667 MHz
+ 0.168 RS: 232
+ 0.172 I2C: ready
+ 0.176 DRAM: 64 MB
+ 1.236 FLASH: 32 MB
+
+ Versus:
+
+ 0.016 CPU: e300c1, MPC8347_PBGA_EA, Rev: 3.0 at 400 MHz, CSB: 266.667 MHz
+ 0.092 RS: 232
+ 0.092 I2C: ready
+ 0.096 DRAM: 64 MB
+ 0.644 FLASH: 32 MB
+
+ So far no boards have needed the late LCRR setup, so simply revert it
+ for now - If it is needed at a later time, those boards can either do
+ their own final LCRR setup in board code (E.G. in board_early_init_r),
+ or we can introduce a CONFIG_SYS_LCRR_LATE config option to only do
+ the setup in cpu_init_r.
+
+ Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 386118a896554b13f14ad0f82356276988f7de82
+Author: Michal Simek <monstr@monstr.eu>
+Date: Tue Dec 8 09:12:49 2009 +0100
+
+ microblaze: Correct ffs regression for Microblaze
+
+ We are using generic implementation of ffs. This should
+ be part of Simon's commit 0413cfecea350000eab5e591a0965c3e3ee0ff00
+
+ Here is warning message which this patch removes.
+
+ In file included from /tmp/u-boot-microblaze/include/common.h:38,
+ from cmd_mtdparts.c:87:
+ /tmp/u-boot-microblaze/include/linux/bitops.h:123:1: warning: "ffs" redefined
+ In file included from /tmp/u-boot-microblaze/include/linux/bitops.h:110,
+ from /tmp/u-boot-microblaze/include/common.h:38,
+ from cmd_mtdparts.c:87:
+ /tmp/u-boot-microblaze/include/asm/bitops.h:269:1:
+ warning: this is the location of the previous definition
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 8fe7b29f9811322931f0192a56431edcf819d6b9
+Author: Graeme Smecher <graeme.smecher@mail.mcgill.ca>
+Date: Mon Dec 7 08:09:57 2009 -0800
+
+ microblaze: Stop stack clobbering in microblaze-generic.
+
+ A typo caused the stack and malloc regions to overlap, which prevented
+ mem_malloc_init() from returning. This commit makes the memory layout match
+ the example described in include/configs/microblaze-generic.h
+
+ Signed-off-by: Graeme Smecher <graeme.smecher@mail.mcgill.ca>
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 0fc52948bda0734431cb528ee4fd82f1dec8c7b5
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Dec 7 23:14:13 2009 +0100
+
+ Update CHANGELOG, prepare -rc2
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f2352877cb2daac88115192fb09991a2397d0b27
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sun Dec 6 23:58:28 2009 -0600
+
+ MAKEALL: Fix return value
+
+ Previously MAKEALL would always return a value of 0, even if 1 or more
+ boards did not compile. This change causes MAKEALL to return 0 if all
+ boards were able to build, otherwise 1.
+
+ This change also requires changing the script interpreter from sh to
+ bash to support bash's PIPESTATUS variable.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit fbc1c8f6f6c972524197829c56dd8f2f5da0200a
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sun Dec 6 01:33:24 2009 -0600
+
+ tools/mkimage: Remove duplicate line of code
+
+ Recent commits 1a99de2cb4d08eb3bf9fb3f60a9d533150de8c0e and
+ 6a590c5f5fd12cdd27f3153522acfac3854590e7 both fixed the same bug in the
+ same manner. Unfortunately git was "smart" enough to merge both changes
+ which resulted in some duplicate code.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+ Reordered code and comment a bit.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit df002fa6b9cd475909ede35bf95b803c2289c6a4
+Author: Heiko Schocher <hs@denx.de>
+Date: Sat Dec 5 11:59:51 2009 +0100
+
+ i2c: fix dangling comment in do_i2c_mw()
+
+ commit bd3784df94bfeca43fbf34094df9cb1bd3ecca3b deleted some unused
+ code in do_i2c_mw(), but missed to also remove the respective
+ commment. This patch fixes this.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit f8450829f921cf10667af98a8d08edfa3d998f04
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Dec 1 19:30:47 2009 +0100
+
+ 52xx, manroland: add fdt_fixup_memory() in ft_board_setup()
+
+ To update the real memory size in the memory node on the
+ uc101 and mucmc52 boards call fdt_fixup_memory() in
+ ft_board_setup().
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 0ec81db20294efdad2454a753e79f1fe244a43ca
+Author: Daniel Hobi <daniel.hobi@schmid-telecom.ch>
+Date: Tue Dec 1 14:05:55 2009 +0100
+
+ Fix computation in nand_util.c:get_len_incl_bad
+
+ Depending on offset, flash size and the number of bad blocks,
+ get_len_incl_bad may return a too small value which may lead to:
+
+ 1) If there are no bad blocks, nand_{read,write}_skip_bad chooses the
+ bad block aware read/write code. This may hurt performance, but does
+ not have any adverse effects.
+
+ 2) If there are bad blocks, the nand_{read,write}_skip_bad may choose
+ the bad block unaware read/write code (if len_incl_bad == *length)
+ which leads to corrupted data.
+
+ Signed-off-by: Daniel Hobi <daniel.hobi@schmid-telecom.ch>
+
+commit aabb8cb0818e285aeed0cfaf243635997e07554d
+Author: Evan Samanas <esamanas@xes-inc.com>
+Date: Mon Nov 9 20:08:36 2009 -0600
+
+ nfs: NfsTimeout() updates
+
+ - NfsTimeout() does not correctly update the NFS timeout value which
+ results in NfsTimeout() only being called once in certain situations.
+ This can result in the 'nfs' command hanging indefinetly. For
+ example, the command:
+
+ nfs 192.168.0.1:/home/user/file
+
+ will not exit until ctrl-c is pressed if 192.168.0.1 does not have an
+ NFS server running.
+
+ This issue is resolved by reinitializting the NFS timeout value inside
+ NfsTimeout() when a timeout occurs.
+
+ - Make the 'nfs' command print the 'T' character when a timeout occurs.
+ Previously there was no indication that timeouts were occuring.
+
+ - Mimic the 'tftpboot' command and when a download fails print "Retry
+ count exceeded; starting again", and restart the download taking the
+ 'netretry' environment variable into account.
+
+ Signed-off-by: Evan Samanas <esamanas@xes-inc.com>
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+ Tested on TQM8xxL.
+
+ Tested by: Wolfgang Denk <wd@denx.de>
+
+ Tested on MPC8527DS.
+
+ Tested by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 224c90d1060bf1a83cbf33ca51d060b9d19e0294
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Nov 18 19:08:59 2009 -0600
+
+ bootm: Fix help message's sub-command ordering
+
+ The help message for the 'bootm' command listed the 'cmdline' and 'bdt'
+ sub-commands in the wrong order which resulted in the error below when
+ following the 'help' command's instructions:
+
+ "Trying to execute a command out of order"
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit a93c92cddaedd5f0720e0da15c6664f7a688b582
+Author: Robert P. J. Day <rpjday@crashcourse.ca>
+Date: Tue Nov 17 07:30:23 2009 -0500
+
+ help: Correct syntax of nandecc help output.
+
+ "nandecc" help output should not reproduce the command name, nor have
+ a trailing newline.
+
+ Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
+
+commit c2fff331a32ceca837d76eb7827d6340da270d52
+Author: Mike Rapoport <mike@compulab.co.il>
+Date: Wed Nov 11 10:03:03 2009 +0200
+
+ smc911x: update SMC911X related configuration description
+
+ Since commit 736fead8fdbf8a8407048bebc373cd551d01ec98 "Convert SMC911X
+ Ethernet driver to CONFIG_NET_MULTI API" SMC911X configration options
+ are called CONFIG_SMC911X rather than CONFIG_DRIVER_SMC911X. Update
+ README to reflect that change.
+
+ Signed-off-by: Mike Rapoport <mike@compulab.co.il>
+
+commit 45b6b65c6bf06a589ef3123192af94b0381db27b
+Author: Mike Rapoport <mike@compulab.co.il>
+Date: Wed Nov 11 10:03:09 2009 +0200
+
+ smc911x: fix typo in smc911x_handle_mac_address name
+
+ Signed-off-by: Mike Rapoport <mike@compulab.co.il>
+
+commit f64ef9bb995687e24e0b61b52316f4eaa97c3bbc
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Thu Nov 19 02:47:28 2009 -0600
+
+ fix nfs symlink name corruption
+
+ An off by one error may cause nfs readlink lookup fail if
+ nfs_path_buff has non-zero data from a previous use.
+
+ Loading: *** ERROR: File lookup fail
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit e8fac25e83426fdf461c66aa8a2530ec28ec536e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Dec 7 21:06:40 2009 +0100
+
+ at91sam9261ek.c: fix minor coding style issue.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4713010adf5beda87410d637ebfc58db0db9a9db
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Dec 6 01:21:28 2009 +0100
+
+ trab: fix warning: implicit declaration of function 'disable_vfd'
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a9f99ab44b473fb394169ba365f8b4380f981584
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Dec 6 00:53:18 2009 +0100
+
+ zlib.c: avoid build conflicts for cradle board
+
+ Commit dce3d79710 updated the zlib code to v0.95; this caused
+ conflicts when building for the "cradle" board, because the (pretty
+ generic) preprocessor variable "OFF" was used in multiple files.
+ Make sure to avoid further conflicts by #undef'ing it in zlib.c
+ before redefining it.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ cc: Giuseppe Condorelli <giuseppe.condorelli@st.com>
+ cc: Angelo Castello <angelo.castello@st.com>
+ cc: Alessandro Rubini <rubini-list@gnudd.com>
+
+commit 8cbf4e4f17121d732e78764f0ba317c9a1838ea6
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Dec 6 00:26:19 2009 +0100
+
+ Fix out-of-tree building of "apollon" board.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f68ab43de67f59925542efb6bcec30f4a84fe695
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Dec 4 05:35:15 2009 -0500
+
+ lzma: ignore unset filesizes
+
+ The Linux kernel build system changed how it compresses things with LZMA
+ such that the header no longer contains the filesize (it is instead set to
+ all F's). So if we get a LZMA image that has -1 for the 64bit field,
+ let's just assume that the decompressed size is unknown and continue on.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit cccfc2ab77877dbdd2abe26b28d4c1f467feb0c0
+Author: Detlev Zundel <dzu@denx.de>
+Date: Tue Dec 1 17:16:19 2009 +0100
+
+ README: Rearrange paragraphs to regain linear arrangement.
+
+ Two later additions to the Configuration Option section unfortunately
+ split the description of Show boot progress and the list of its call outs.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit c81296c16fd9d12422c9968cc0f1d9bf440a7d88
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Nov 24 16:42:10 2009 -0600
+
+ tools/mkimage: Print FIT image contents after creation
+
+ Previously, there was no indication to the user that a FIT image was
+ successfully created after executing mkimage. For example:
+
+ $ mkimage -f uImage.its uImage.itb
+ DTC: dts->dtb on file "uImage.its"
+
+ Adding some additional output after creating a FIT image lets the user
+ know exactly what is contained in their image, eg:
+
+ $ mkimage -f uImage.its uImage.itb
+ DTC: dts->dtb on file "uImage.its"
+ FIT description: Linux kernel 2.6.32-rc7-00201-g7550d6f-dirty
+ Created: Tue Nov 24 15:43:01 2009
+ Image 0 (kernel@1)
+ Description: Linux Kernel 2.6.32-rc7-00201-g7550d6f-dirty
+ Type: Kernel Image
+ Compression: gzip compressed
+ Data Size: 2707311 Bytes = 2643.86 kB = 2.58 MB
+ Architecture: PowerPC
+ OS: Linux
+ Load Address: 0x00000000
+ Entry Point: 0x00000000
+ Hash algo: crc32
+ Hash value: efe0798b
+ Hash algo: sha1
+ Hash value: ecafba8c95684f2c8fec67e33c41ec88df1534d7
+ Image 1 (fdt@1)
+ Description: Flattened Device Tree blob
+ Type: Flat Device Tree
+ Compression: uncompressed
+ Data Size: 12288 Bytes = 12.00 kB = 0.01 MB
+ Architecture: PowerPC
+ Hash algo: crc32
+ Hash value: a5cab676
+ Hash algo: sha1
+ Hash value: 168722b13e305283cfd6603dfe8248cc329adea6
+ Default Configuration: 'config@1'
+ Configuration 0 (config@1)
+ Description: Default Linux kernel
+ Kernel: kernel@1
+ FDT: fdt@1
+
+ This brings the behavior of creating a FIT image in line with creating a
+ standard uImage, which also prints out the uImage contents after
+ creation.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 8e1c89663cc8796b85588910046e03b388a7597c
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Nov 24 16:42:09 2009 -0600
+
+ tools/fit_image.c: Remove unused fit_set_header()
+
+ The FIT fit_set_header() function was copied from the standard uImage's
+ image_set_header() function during mkimage reorganization. However, the
+ fit_set_header() function is not used since FIT images use a standard
+ device tree blob header.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 1a99de2cb4d08eb3bf9fb3f60a9d533150de8c0e
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Nov 24 16:42:08 2009 -0600
+
+ tools/mkimage: Assume FDT image type for FIT images
+
+ When building a Flattened Image Tree (FIT) the image type needs to be
+ "flat_dt". Commit 89a4d6b12fd6394898b8a454cbabeaf1cd59bae5 introduced a
+ regression which caused the user to need to specify the "-T flat_dt"
+ parameter on the command line when building a FIT image. The "-T
+ flat_dt" parameter should not be needed and is at odds with the current
+ FIT image documentation.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 270737acca21f3939f814de5dcf350a1c3d80d83
+Author: Michael Brandt <Michael.Brandt@emsyso.de>
+Date: Sun Nov 22 14:13:27 2009 +0100
+
+ EXT2FS: fix inode size for ext2fs rev#0
+
+ extfs.c assumes that there is always a valid inode_size field in the
+ superblock. But this is not true for ext2fs rev 0. Such ext2fs images
+ are for instance generated by genext2fs. Symptoms on ARM machines are
+ messages like: "raise: Signal # 8 caught"; on PowerPC "ext2ls" will
+ print nothing.
+ This fix checks for rev 0 and uses then 128 bytes as inode size.
+
+ Signed-off-by: Michael Brandt <Michael.Brandt@emsyso.de>
+ Tested on: TQM5200S
+ Tested-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit bcb324d68f7955c1136dafc944eb55db8ebaa601
+Author: Robert P. J. Day <rpjday@crashcourse.ca>
+Date: Thu Nov 19 11:00:28 2009 -0500
+
+ Remove superfluous preprocessor tests from some cmd_*.c files.
+
+ A small number of common/cmd_*.c files contain preprocessor tests that
+ are apparently superfluous since those same tests are used in the
+ Makefile to control the compilation of those files. Those tests are
+ clearly redundant as long as they surround the entirety of the source
+ in those files.
+
+ Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
+
+commit ad53226156fa64b6d04c0d1d6e91e09979cbea15
+Author: Robert P. J. Day <rpjday@crashcourse.ca>
+Date: Tue Nov 17 01:59:29 2009 -0500
+
+ README: Update the list of directories.
+
+ Bring the directory listing more into line with current content.
+
+ Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
+
+commit bd3784df94bfeca43fbf34094df9cb1bd3ecca3b
+Author: Pratap Chandu <pratap.rrke@gmail.com>
+Date: Thu Nov 12 19:28:25 2009 +0530
+
+ Removes dead code in the file common/cmd_i2c.c
+
+ There is some dead code enclosed by #if 0 .... #endif in the file
+ common/cmd_i2c.c
+ This patch removes the dead code.
+
+ Signed-off-by: Pratap Chandu <pratap.rrke@gmail.com>
+
+commit 64a480601a5614b441de692ae15a62c51e0bb381
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Nov 11 17:51:56 2009 -0500
+
+ smc91111_eeprom: drop CONFIG stub protection
+
+ Since the Makefile now controls the compilation of this, there is no need
+ for CONFIG checking nor the stub function.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit f3a7bddc06c927c36a1a99a97131299479ef207a
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Wed Nov 11 19:56:58 2009 +0100
+
+ RTC: Fix return code in MC13783 RTC driver.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit d52e3e0176a74c30549251e16c5c00a363c544d2
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Wed Nov 11 19:56:36 2009 +0100
+
+ cmd_date: Fix spelling in error message.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit c253122395753abb9e531d8906c5265dc8803fb1
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Nov 11 10:36:28 2009 -0600
+
+ Move do_irqinfo() to common/cmd_irq.c
+
+ cmd_irq.c is a much better home and it is already conditionally
+ compiled based on CONFIG_CMD_IRQ.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit a5dd4dc64fe68e549c5ffcf6a048281b5ba94752
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Nov 11 10:36:19 2009 -0600
+
+ cmd_license: Remove unneeded #ifdef CONFIG_CMD_LICENSE
+
+ cmd_license is already conditionally compiled at the Makefile-level.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 06015146a15adc7455440c491d543f6a8091551d
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Nov 9 15:18:52 2009 -0600
+
+ m41t11: Remove unused functions
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 9ef78511cda39987e5fc10febf386fd19f58ecf7
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Nov 9 15:17:50 2009 -0600
+
+ circbuf: Move to lib_generic and conditionally compile
+
+ circbuf could be used as a generic library and is only currently
+ needed when CONFIG_USB_TTY is defined.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 604f7ce55ad74694ef8743ad2e99933dc0265e46
+Author: Sanjeev Premi <premi@ti.com>
+Date: Mon Nov 9 22:43:00 2009 +0530
+
+ Fix build failure in examples/standalone
+
+ Some versions of 'make' do not handle trailing white-spaces
+ properly. Trailing spaces in ELF causes a 'fake' source to
+ be added to the variable COBJS; leading to build failure
+ (listed below). The problem was found with GNU Make 3.80.
+
+ Using text-function 'strip' as a workaround for the problem.
+
+ make[1]: Entering directory `/home/sanjeev/u-boot/examples/standalone'
+ arm-none-linux-gnueabi-gcc -g -Os -fno-common -ffixed-r8 -msoft-float
+ -D__KERNEL__ -DTEXT_BASE=0x80e80000 -I/home/sanjeev/u-boot/include
+ -fno-builtin -ffreestanding -nostdinc -isystem /opt/codesourcery/2009q1-
+ 203/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.3/include -pipe -DCONFIG_
+ ARM -D__ARM__ -marm -mabi=aapcs-linux -mno-thumb-interwork -march=armv5
+ -Wall -Wstrict-prototypes -fno-stack-protector -g -Os -fno-common -ff
+ ixed-r8 -msoft-float -D__KERNEL__ -DTEXT_BASE=0x80e80000 -I/home/sanje
+ ev/u-boot/include -fno-builtin -ffreestanding -nostdinc -isystem /opt/co
+ desourcery/2009q1-203/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.3/includ
+ e -pipe -DCONFIG_ARM -D__ARM__ -marm -mabi=aapcs-linux -mno-thumb-inte
+ rwork -march=armv5 -I.. -Bstatic -T u-boot.lds -Ttext 0x80e80000 -o .c
+ arm-none-linux-gnueabi-gcc: no input files
+ make[1]: *** [.c] Error 1
+ make[1]: Leaving directory `/home/sanjeev/u-boot/examples/standalone'
+ make: *** [examples/standalone] Error 2
+ premi #
+
+ Signed-off-by: Sanjeev Premi <premi@ti.com>
+
+ Fixed typo (s/ElF/ELF/).
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit af860962b544ddf323c4ff68454f00d31e44df0a
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Wed Nov 4 18:30:08 2009 -0600
+
+ 85xx: Remove unused CONFIG_ASSUME_AMD_FLASH from config files
+
+ A bunch of the 85xx boards have this cruft in them - it's not used
+ anywhere. Delete it.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit deec1fbd4f704dded2e668bb9e368631981ea139
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Dec 2 22:26:30 2009 +0100
+
+ MAINTAINERS: update responsible for MPC85xx/86xx
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Kumar Gala <galak@kernel.crashing.org>
+ Cc: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit 824d82997fbcf28e49081d36fdd5d3be1b92b03d
+Author: Ira W. Snyder <iws@ovro.caltech.edu>
+Date: Wed Nov 4 13:37:59 2009 -0800
+
+ Fix example FIT image source files
+
+ The example FIT image source files do not compile with the latest dtc and
+ mkimage. The following error message is produced:
+
+ DTC: dts->dtb on file "kernel.its"
+ Error: kernel.its 7:0 - 1:0 syntax error
+ FATAL ERROR: Unable to parse input tree
+ ./mkimage: Can't read kernel.itb.tmp: Invalid argument
+
+ The FIT image source files are missing the "/dts-v1/;" directive at the
+ beginning of the file. Add the directive to the examples.
+
+ Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
+
+commit fd66066ee3ce15c2966feb9b2be0f0d51a95db48
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Nov 4 16:13:19 2009 -0500
+
+ img2srec: use standard types
+
+ The img2srec code creates a lot of typedefs with common names. These
+ easily clash with system headers that include these typedefs (like mingw).
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8204e068110e8abe5db9c3b7df9971b58cda8f26
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Nov 4 16:03:25 2009 -0500
+
+ tools: gitignore *.exe binaries
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 425d3b666eee5c58fdb82fb894a535dd71782a05
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Nov 3 23:31:07 2009 -0600
+
+ ppc: Move conditional compilation of kgdb.c to Makefile
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit e06ab6546b332acc55ac4e7c31338662328b0fb3
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Nov 3 11:36:39 2009 -0500
+
+ spi_flash.h: pull in linux/types.h for u## types
+
+commit 0008555f4d57c15ad86ee735861ca0d783042f61
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Nov 3 11:36:26 2009 -0500
+
+ bootm: mark local boot_os[] table static
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit a8fa379d47f06c7d3ed75c8fb26ae43ee38e1fd7
+Author: Nishanth Menon <nm@ti.com>
+Date: Mon Nov 2 09:40:18 2009 -0600
+
+ mkconfig: deny messed up ARCH definition
+
+ Refuse to setup a platform if the command line ARCH= is not the same
+ as the one required for the board. This prevents any user with
+ prehistoric aliases from messing up their builds.
+
+ Reported in thread:
+ http://old.nabble.com/-U-Boot--Build-breaks-on-some-OMAP3-configs-to26132721.html
+
+ Inputs from: Mike Frysinger and Wolfgang Denk:
+ http://lists.denx.de/pipermail/u-boot/2009-November/063642.html
+
+ Cc: Wolfgang Denk <wd@denx.de>
+ Cc: Mike Frysinger <vapier@gentoo.org>
+ Cc: Anand Gadiyar <gadiyar@ti.com>
+ Cc: Dirk Behme <dirk.behme@googlemail.com>
+ Signed-off-by: Nishanth Menon <nm@ti.com>
+
+commit 67b96e87da1b84660fa1e5b78cc760246d116814
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Wed Oct 28 22:13:39 2009 +0100
+
+ Repair the 'netretry=once' option.
+
+ 'netretry = once' does the same as 'netretry = yes', because it is not stored
+ when it was tried once.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit b25e38fc36e13fa8037fa4d37fe909d1d6e6f372
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Thu Oct 29 14:24:22 2009 +0100
+
+ Repair build fail in case CONFIG_PPC=n and CONFIG_FIT=y
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 01826abc02ce160501534788e63629ccbe31b05c
+Author: Grazvydas Ignotas <notasas@gmail.com>
+Date: Thu Nov 12 11:46:07 2009 +0200
+
+ OMAP3: pandora: fix booting without serial attached
+
+ When the board is booted without serial cable attached (which
+ is how most of them will be used) UART RX is left floating and
+ sometimes picks noise, which interrupts countdown and enters
+ U-Boot prompt instead of booting the kernel.
+
+ Fix this by setting up internal pullup on UART RX pin. This
+ does not prevent serial from working as the internal pullup
+ is weak.
+
+ Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
+
+commit 41dfd8a60324243dbe2dc313a607910824a68aa7
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Wed Oct 28 22:13:37 2009 +0100
+
+ Add support for CS2 dataflash for Atmel-SPI.
+
+ The only missing chipselect line support is CS2, and I need it on
+ CS2...
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit faf36c1437c95e4a86835633d9801c5f6396a3c7
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Wed Oct 28 22:13:36 2009 +0100
+
+ Fix mingw tools build
+
+ mkimage does not build due to missing strtok_r() and getline() implementation
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 6a590c5f5fd12cdd27f3153522acfac3854590e7
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Wed Oct 28 22:13:35 2009 +0100
+
+ Building of FIT images does not work.
+
+ The type is not set for generation of the FIT images, resulting
+ in no images being created without printing or returning an error
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 0a7691e820e33b23f61c6ea0ef6fa72099d1a6ae
+Author: Renato Andreola <renato.andreola@imagos.it>
+Date: Mon Nov 23 16:45:14 2009 -0500
+
+ Nios2: do_boom_linux(): kernel gunzip input data integrity problem due to
+ missing cache flush.
+
+ Added instruction and data caches flush.
+
+ Signed-off-by: Scott McNutt <smcnutt@psyent.com>
+
+commit de03825386eaedb5e17261dd87cde86e9a764ba9
+Author: Scott McNutt <smcnutt@psyent.com>
+Date: Mon Nov 23 16:29:40 2009 -0500
+
+ Nios2: Fix compiler warnings in lib_nios2/board.c (unused variables)
+
+ Signed-off-by: Scott McNutt <smcnutt@psyent.com>
+
+commit 57baa379cf2f67df89a5c6052767fd25daff20bd
+Author: Scott McNutt <smcnutt@psyent.com>
+Date: Mon Nov 23 15:54:25 2009 -0500
+
+ Nios2/Nios: Remove unnecessary (residual) linker Nios command scripts from
+ the standalone examples.
+
+ Signed-off-by: Scott McNutt <smcnutt@psyent.com>
+
+commit fcffb680e77fcb48598d4a9944dbe2d4503170e0
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Oct 14 19:28:03 2009 -0400
+
+ sf: fix stmicro offset setup while erasing
+
+ Reported-by: Peter Gombos <gombos@protecta.hu>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d394a7795027d96ca55799df40bd5c4a13dbeebe
+Author: Jason McMullan <mcmullan@netapp.com>
+Date: Fri Oct 9 17:12:23 2009 -0400
+
+ sf: new driver for Winbond W25X16/32/64 devices
+
+ Signed-off-by: Jason McMullan <jason.mcmullan@gmail.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit cada315100c88894b85972a91309a6f2413966b6
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Thu Oct 1 23:55:17 2009 +0200
+
+ mpc8260: move FDT memory node fixup into common CPU code.
+
+ Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com>
+ Tested-by: Heiko Schocher <hs@denx.de>
+
+commit f2cea405f83da46b72098ea874fb3eefe185d312
+Author: Po-Yu Chuang <ratbert.chuang@gmail.com>
+Date: Wed Sep 23 15:52:35 2009 +0800
+
+ Add driver for FTRTC010 real time clock
+
+ Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
+
+ Edited commit message.
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c0356a88011330646e960dfac8a2c909bede3304
+Author: Mark Jackson <mpfj-list@mimc.co.uk>
+Date: Mon Aug 17 16:42:52 2009 +0100
+
+ MIMC200: set default fbmem value
+
+ This patch adds a default bootargs "fbmem" value to the
+ CONFIG_BOOTARGS string for the MIMC200 board.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+
+commit 3ffc0d61bad7d986e344ce7062b37c5c8f04fb0e
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Oct 27 19:58:09 2009 +0100
+
+ ppc4xx: Initialize magnetic coupler on VOM405 boards
+
+ This patch fixes an ugly behavior of the IL712 magnetic coupler
+ as used on VOM405. These parts will remember their last state
+ over a power cycle which might cause unwanted behavior.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit be0db3e3141c6c6b4e232b51091f35a284cc54e5
+Author: Matthias Fuchs <matthias.fuchs@esd.eu>
+Date: Mon Oct 26 09:58:45 2009 +0100
+
+ ppc4xx: Initialize magnetic couplers in PLU405
+
+ This patch fixes an ugly behavior of the IL712 magnetic couplers
+ as used on PLU405. These parts will remember their last state
+ over a power cycle which might cause unwanted behavior.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 067f54c66acd469870ef6946e1591bfcc02de1b3
+Author: Matthias Fuchs <matthias.fuchs@esd.eu>
+Date: Mon Oct 26 09:55:40 2009 +0100
+
+ Add minimal SJA1000 header for basic CAN mode
+
+ This patch is in preparation for the upcoming PLU405 board fix.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cdbdbe65f5f006cba208accee5a126c659d4b867
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Nov 13 08:52:21 2009 -0600
+
+ ppc/85xx: Fix how we determine the number of CAM entries
+
+ We were incorrectly use the max CAM size as the number of entries in
+ the array for setting up the addrmap. We should be using the NENTRY
+ field which is the low 12-bits of TLB1CFG.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit fbd47b6753b08162436d9ccad1e63c8d43ede54c
+Author: Mike Rapoport <mike@compulab.co.il>
+Date: Thu Nov 12 15:35:08 2009 +0200
+
+ smc911x: make smc911x_initialize return correct value
+
+ Make smc911x_initialize return -1 on error and number of interfaces
+ detected otherwise.
+
+ Signed-off-by: Mike Rapoport <mike@compulab.co.il>
+ Acked-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit c44efcf97b335dcef7d014f65b7d3094e79adb13
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Nov 12 22:26:02 2009 -0500
+
+ smc911x_eeprom: fix building after smc911x overhaul
+
+ When the smc911x driver was converted to NET_MULTI, the smc911x eeprom was
+ missed. The config option needed updating as well as overhauling of the
+ rergister read/write functions.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Tested-by: Mike Rapoport <mike.rapoport@gmail.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3ad95deb30ac73bd57e966d321215a17d3236f9f
+Author: Dave Liu <daveliu@freescale.com>
+Date: Thu Nov 12 07:26:37 2009 +0800
+
+ fsl-ddr: Fix the chip-select interleaving issue
+
+ commit 1542fbdeec0d1e2a6df13189df8dcb1ce8802be3
+ introduced one new bug to chip-select interleaving.
+
+ Single DDR controller also can do the chip-select
+ interleaving if there is dual-rank or qual-rank DIMMs.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 651ef90fa6ca824c8e581aeef9e04bbbe7f7e9ce
+Author: javier Martin <javier.martin@vista-silicon.com>
+Date: Thu Oct 29 08:22:43 2009 +0100
+
+ mxc_fec: avoid free() calls to already freed pointers.
+
+ Sometimes, inside NetLoop, eth_halt() is called before eth_init() has
+ been called. This is harmless except for free() calls to pointers
+ which have not been allocated yet.
+
+ This patch initializes those pointers to NULL and allocates them only
+ the first time. This way we can get rid of free calls in halt callback.
+
+ This has been tested in i.MX27 Litekit board and eldk-4.2 toolchains.
+
+ Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit e8f1546a88b4ade6a910c4a7958a774ee1b40023
+Author: javier Martin <javier.martin@vista-silicon.com>
+Date: Thu Oct 29 08:18:34 2009 +0100
+
+ mxc_fec: fix some erroneous PHY accesses.
+
+ This patch fixes erroneous access to the ethernet PHY which broke the driver.
+ 1. Selector field in the auto-negotiation register must be 0x00001 for
+ using 802.3, not 0x00000 which is reseved.
+ 2. Access to the PHY address specified by CONFIG_FEC_MXC_PHYADDR, not
+ 0x0 fixed address.
+
+ This has been tested in i.MX27 Litekit board and eldk-4.2 toolchains.
+
+ Now using proper defines for auto-negotiation register.
+
+ Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit f865fcbbb35851e75fee9c3a3fa8e0f71d9e6463
+Author: Ron Lee <ron@debian.org>
+Date: Wed Aug 5 20:14:01 2009 +0200
+
+ ARM Don't inline weak symbols
+
+ ------------------------------------------------------------------------
+
+ GCC 4.4 complains about this now.
+
+ Signed-off-by: Ron Lee <ron@debian.org>
+
+commit d14c7ec2b51fb92c4a5218b299b772c3d186510d
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Mon Nov 9 13:09:57 2009 -0800
+
+ Fix SMC91111 regression: lpd7a40x build failures
+
+ Both lpd7a400 and lpd7a404 failed to compile because they had
+ CONFIG_SMC_USE_IOFUNCS defined:
+
+ examples/standalone/smc91111_eeprom.c:388: undefined reference to `SMC_outw'
+
+ Also removed an orphaned paren in lpd7a404.h
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 1031ae960ce6ce8332190278a06e2d72c2b2793e
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Mon Nov 9 14:01:08 2009 -0800
+
+ SMC91111: Clean up SMC_inx macros on xsengine and xaeniax
+
+ This patch fixes the following warnings:
+
+ Configuring for xaeniax board...
+ smc91111_eeprom.c: In function 'print_macaddr':
+ smc91111_eeprom.c:278: warning: suggest parentheses around + or - in operand of &
+ smc91111_eeprom.c:281: warning: suggest parentheses around + or - in operand of &
+ ...
+ Configuring for xsengine board...
+ smc91111_eeprom.c: In function 'print_macaddr':
+ smc91111_eeprom.c:278: warning: suggest parentheses around + or - inside shift
+ smc91111_eeprom.c:281: warning: suggest parentheses around + or - inside shift
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 830c7b6722c6a9762411bf52a7bf2fae4dc71dab
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Mon Nov 9 11:43:18 2009 -0800
+
+ Fix CS8900 regression on impa7 board
+
+ The following error was seen on impa7 board, due to its use of a 32-bit bus
+ on CS8900.
+ cs8900.c:137:37: error: macro "get_reg_init_bus" passed 2 arguments, but takes just 1
+
+ This patch gives the macro the correct number of arguments
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit e5c5d9e0834bacf1c4787fa76cc4e369f2597cf5
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Nov 1 22:39:56 2009 -0500
+
+ clarify eth driver halt/recv steps
+
+ The dev->halt() func can be called at any time, and the dev->recv() func
+ does not need to use NetRxPackets[] when calling NetReceive().
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 497ab0eec5e1e2dfccc141a4485cd6b940e1424a
+Author: Hui.Tang <zetalabs@gmail.com>
+Date: Thu Nov 5 09:58:44 2009 +0800
+
+ Fix cs8900 dev->priv not init issue
+
+ Ensure all CS8900 data structures are assigned before accessing device
+
+ Signed-off-by: Hui.Tang <zetalabs@gmail.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 4fe5193d464ecdac26ddc71b1351be5b86bbff29
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 3 14:34:45 2009 +0100
+
+ ppc4xx: 44x_spd_ddr2.c: Fix register macro ECCCR -> ECCES (SDRAM_ECCES)
+
+ This error only appears when DEBUG is enabled in this driver. That's why
+ it went unnoticed till now.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 916ed9444d3ab7b5cd6312557005f2a764a8baf7
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Oct 29 18:37:45 2009 +0100
+
+ ppc4xx: Canyonlands: Change EBC bus config to drive always (no high-z)
+
+ This patch fixes a problem only seen very occasionally on Canyonlands.
+ The NOR flash interface (CFI driver) doesn't work reliably in all cases.
+ Erasing and/or programming sometimes doesn't work. Sometimes with
+ an error message, like "flash not erased" when trying to program an
+ area that should have just been erased. And sometimes without any error
+ messages. As mentioned above, this problem was only seen rarely and with
+ some PLL configuration (CPU speed, EBC speed).
+
+ Now I spotted this problem a few times, when running my Canyonlands with
+ the following setup (chip_config):
+
+ 1000-nor - NOR CPU:1000 PLB: 200 OPB: 100 EBC: 100
+
+ Changing the EBC configuration to not release the bus into high
+ impedance state inbetween the transfers (ATC, DTC and CTC bits set to 1
+ in EBC0_CFG) seems to fix this problem. I haven't seen any failure
+ anymore with this patch applied.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: David Mitchell <dmitchell@amcc.com>
+ Cc: Jeff Mann <MannJ@embeddedplanet.com>
+
+commit 25793f76bf9a7be59c9415ef0f78d034e8d53dae
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Thu Oct 29 12:29:37 2009 +0100
+
+ ARM: Use Linux version for unaligned access code
+
+ The asm-arm/unaligned.h includes linux/unaligned/access_ok.h
+ This file is unsafe to be used on ARM, since it does an unaligned memory
+ accesses which fails on ARM.
+
+ Lookin at Linux the basic difference seems to be the header
+ "include/asm-arm/unaligned.h". The Linux version of "unaligned.h"
+ does *not* include "access_ok.h" at all. It includes "le_byteshift.h"
+ and "be_byteshift.h" instead.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ --
+ include/asm-arm/unaligned.h | 3 -
+ include/linux/unaligned/be_byteshift.h | 70 +++++++++++++++++++++++++++++++++
+ include/linux/unaligned/le_byteshift.h | 70 +++++++++++++++++++++++++++++++++
+ 3 files changed, 142 insertions(+), 1 deletion(-)
+ create mode 100644 include/linux/unaligned/be_byteshift.h
+ create mode 100644 include/linux/unaligned/le_byteshift.h
+
+commit 6d6e7c53d5c75e5e24841c5506f4ed9d82adee09
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Nov 4 18:02:10 2009 -0600
+
+ ppc/85xx: Fix inclusion of 83xx immap in 85xx builds
+
+ The nand_boot_fsl_elbc.c is shared between 83xx & 85xx however we should
+ not be including the immap_83xx.h when building 85xx. We can just get
+ this all from common.h
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 107b579c75256212d4bf8b99ee8d68e0078f3646
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Wed Nov 4 17:34:04 2009 -0600
+
+ 86xx: Remove redundant code in initdram
+
+ The same code exists both inside an #ifdef and outside of it.
+ Remove the extra code for all the 86xx boards.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 715d8f7608f77c93f1807a032644893fd5b6d08b
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Mon Nov 2 09:05:49 2009 -0600
+
+ fsl_pci_init_port end-point initialization is broken
+
+ commit 70ed869e broke fsl pcie end-point initialization.
+ Returning 0 is not correct. The function must return the first free
+ bus number for the next controller.
+
+ fsl_pci_init() must still be called and a bus allocated even if the
+ controller is an end-point.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Acked-by: Vivek Mahajan <vivek.mahajan@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 01471d538fb163f472a769f21267d7676c91267c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Nov 4 01:29:04 2009 -0600
+
+ Revert "ppc/85xx/pci: fsl_pci_init: pcie agent mode support"
+
+ This reverts commit 70ed869ea5f6b1d13d7b140c83ec0dcd8a127ddc.
+
+ There isn't any need to modify the API for fsl_pci_init_port to pass the
+ status of host/agent(end-point) status. We can determine that
+ internally to fsl_pci_init_port. Revert the patch that makes the API
+ change.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ff88229549e08fdd3f9127c1cc4db11a3576250f
+Author: Dave Liu <daveliu@freescale.com>
+Date: Sat Oct 31 07:59:55 2009 +0800
+
+ ppc/85xx: Fix misc L2 cache enabling bug
+
+ We need loop-check the flash clear lock and enable bit for L2 cache.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 59434fe243962758742af5cb8e2ced976e17c302
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Fri Oct 30 10:16:27 2009 +0900
+
+ sh: Update lowlevel_init.S of espt-giga
+
+ There was the point that did not use write macro.
+ Change to write macro.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit f1cae1969d9e971fb72827a5731ce7e752464aa2
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Fri Oct 30 10:01:25 2009 +0900
+
+ sh: Move some defs to convince 'pcrel too far'
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ Signed-off-by: Takashi Yoshii <yoshii.takashi@gmail.com>
+
+commit 0f9eaf4b323ea0ca95944b84c7465b81ba575514
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Thu Oct 15 13:36:34 2009 +0900
+
+ sh: Remove malloc_bin_reloc from lib_sh, lib_nios2 and lib_nios.
+
+ By "arm/microblaze/nios/nios2/sh: Remove relocation fixups"
+ (commit: 0630535e2d062dd73c1ceca5c6125c86d1127a49", doesn't need
+ malloc_bin_reloc function. This commit remove this.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 0775437293a6963cb21244dfae6978cbf67c6bfe
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Wed Oct 21 21:53:39 2009 -0700
+
+ Fix DM9000 MAC address handling
+
+ Proper behavior is to pull MAC address from NVRAM in the initialization() an
+ stuff it in dev->address, then program the device from dev->address in
+ the init() function.
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 98d92d8c9f4021629a45261ad5ec3f3595f3a27a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Oct 28 22:07:56 2009 +0100
+
+ sbc8349: fix incorrect comment
+
+ The comment for the BR0_PRELIM port size initialization incorrectly
+ stated 32 bit, while it's actually 16 bit. The code is correct.
+
+ Reported-by: Guenter Koellner <guenter.koellner@nsn.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a38f85e180a30b6225808828ded1017b1a5418c6
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Wed Oct 28 11:05:03 2009 -0400
+
+ Fix Compliation warning for TNY-A9260 and TNY-A9G20
+
+ The patch fixes a compilation warning by defining
+ CONFIG_SYS_64BIT_VSPRINTF in the config file
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+
+commit 264e42ee54f1d322805d9068168fd362b413fd09
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Wed Oct 28 11:04:53 2009 -0400
+
+ Fix Compliation warning for SBC35-A9G20 board
+
+ The patch fixes a compilation warning by defining
+ CONFIG_SYS_64BIT_VSPRINTF in the config file
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+
+commit 353462f6ff9769091fb644d44d8025f20a4192d9
+Author: Eric Millbrandt <emillbrandt@coldhaus.com>
+Date: Wed Oct 28 09:37:33 2009 -0500
+
+ galaxy5200: Add default environment variables
+
+ Extend bootdelay to 10 seconds. Set boot retry time to 120 seconds and use
+ reset to retry. Define default bootcommand and bootargs for production.
+
+ Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
+
+commit fa36ae790eb10ce70935f9a78f07703719dca422
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Oct 27 15:15:55 2009 +0100
+
+ cfi: Add weak default function for flash_cmd_reset()
+
+ Currently the CFI driver issues both AMD and Intel reset commands.
+ This is because the driver doesn't know yet which chips are connected.
+ This dual reset seems to cause problems with the M29W128G chips as
+ reported by Richard Retanubun. This patch now introduces a weak default
+ function for the CFI reset command, still with both resets. This can
+ be overridden by a board specific version if necessary.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Richard Retanubun <RichardRetanubun@ruggedcom.com>
+
+commit 4946775c6db52dba28f72ba3525764b54f1d4593
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Oct 28 00:49:47 2009 +0100
+
+ Coding Style cleanup; update CHANGELOG, prepare -rc1
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 246c69225c7b962d5c93e92282b78ca9fc5fefee
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sun Oct 25 15:12:56 2009 -0500
+
+ Add 'editenv' command
+
+ The editenv command can be used to edit an environment variable.
+ Editing an environment variable is useful when one wants to tweak an
+ existing variable, for example fix a typo or change the baudrate in the
+ 'bootargs' environment variable.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit b0fa8e50632a628766db23f5c884ec63f1469552
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sun Oct 25 15:12:55 2009 -0500
+
+ setenv(): Delete 0-length environment variables
+
+ Previously setenv() would only delete an environment variable if it
+ was passed a NULL string pointer as a value. It should also delete an
+ environment variable when it encounters a valid string pointer of
+ 0-length.
+
+ This change/fix is generally useful and is necessary for the upcoming
+ "editenv" command.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit ecc5500ee487170d8af6ff893fd1e0082380a01a
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sun Oct 25 15:12:54 2009 -0500
+
+ readline(): Add ability to modify a string buffer
+
+ If the 'buf' parameter is a non-0-length string, its contents will be
+ edited. Previously, the initial contents of 'buf' were ignored and the
+ user entered its contents from scratch.
+
+ This change is necessary to support the upcoming "editenv" command but
+ could also be used for future commands which require a user to modify
+ an existing string.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit f923943843cd617d681387e7fe81a48060cc6401
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sun Oct 25 15:12:53 2009 -0500
+
+ cread_line(): Remove unused variables
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit e491a71e578e93bd3b2f8f20d8ef8f111c98010d
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sun Oct 25 15:12:52 2009 -0500
+
+ Check for NULL prompt in readline_into_buffer()
+
+ Previously, passing readline() or readline_into_buffer() a NULL 'prompt'
+ parameter would result in puts() printing garbage when
+ CONFIG_CMDLINE_EDITING was enabled.
+
+ Note that no board currently triggers this bug. Enabling
+ CONFIG_CMDLINE_EDITING on some boards (eg bab7xx) would result in
+ the bug appearing. This change is only intended to prevent someone
+ from running into this issue in the future.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 16d1c10783660f3fdbc3c19141f42f3b0d1834d3
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Oct 25 23:00:09 2009 +0100
+
+ drivers/net/phy/miiphybb.c: fix warning: no newline at end of file
+
+ Add missing newline.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Luigi Mantellini <luigi.mantellini@idf-hit.com>
+ Cc: Ben Warren <biggerbadderben@gmail.com>
+
+commit a747a7f31059b9069e97c78bba5496409c33aa05
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Oct 27 00:03:32 2009 +0100
+
+ Revert "env: only build env_embedded and envcrc when needed"
+
+ Breaks building on many boards, and no really clean fix available yet.
+
+ This reverts commit 6dab6add2d8ee80905234b326abc3de11be1d178.
+
+commit 3fca80375981fe83d4674a0267183b469a1ea7ff
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Oct 15 17:47:16 2009 +0400
+
+ mpc85xx: Configure QE USB for MPC8569E-MDS boards
+
+ Setup QE pin multiplexing for USB function, configure needed BCSRs
+ and add some fdt fixups.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 14809b6c21c89dd65abaf3fea7627fb5ea0f78a3
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Oct 15 17:47:13 2009 +0400
+
+ mpc85xx: Configure QE UART for MPC8569E-MDS boards
+
+ To make QE UART usable by Linux we should setup pin multiplexing
+ and turn UCC2 Ethernet node into UCC2 QE UART node.
+
+ Also, QE UART is mutually exclusive with UART0, so we can't enable
+ it if eSDHC is in 4-bits mode on pilot boards, or if it's a prototype
+ board with eSDHC in 1- or 4-bits mode.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 70d665b1d230b9575a647948e8db3da1e6743e5c
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Oct 15 17:47:11 2009 +0400
+
+ mpc85xx: Setup QE pinmux for SPI Flash on MPC8569E-MDS boards
+
+ SPI Flash (M25P40) is connected to the SPI1 bus, we need a few
+ qe_iop entries to actually enable SPI1 on these boards.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 65dec3b4599a17e83ec69dfd059e4ea1e795ef37
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Oct 15 17:47:09 2009 +0400
+
+ mpc85xx: Setup SRIO memory region LAW for MPC8569E-MDS boards
+
+ This patch sets memory window for Serial RapidIO on MPC8569E-MDS
+ boards.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a29155e12286cc5ec2df72c1cab28e3659bfdad5
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Oct 15 17:47:08 2009 +0400
+
+ mpc85xx: Add eLBC NAND support for MPC8569E-MDS boards
+
+ Simply add some defines, and adjust TLBe setup to include some
+ space for eLBC NAND.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 7f52ed5ef1b490da282ace3316be381a6abf96a5
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Oct 15 17:47:06 2009 +0400
+
+ mpc85xx: Add eSDHC support for MPC8569E-MDS boards
+
+ eSDHC is mutually exlusive with UART0 (in 4-bits mode) and I2C2
+ (in 1-bit mode). When eSDHC is used, we should switch u-boot console to
+ UART1, and make the proper device-tree fixups.
+
+ Because of an erratum in prototype boards it is impossible to use eSDHC
+ without disabling UART0 (which makes it quite easy to 'brick' the board
+ by simply issung 'setenv hwconfig esdhc', and not able to interact with
+ U-Boot anylonger).
+
+ So, but default we assume that the board is a prototype, which is a most
+ safe assumption. There is no way to determine board revision from a
+ register, so we use hwconfig.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 48618126f78f05042dae428811809b594f747eb9
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Oct 23 15:55:48 2009 -0500
+
+ xpedite5370: Enable multi-core support
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 5ccd29c3679b3669b0bde5c501c1aa0f325a7acb
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Oct 23 15:55:47 2009 -0500
+
+ 85xx: MP Boot Page Translation update
+
+ This change has 3 goals:
+ - Have secondary cores be released into spin loops at their 'true'
+ address in SDRAM. Previously, secondary cores were put into spin
+ loops in the 0xfffffxxx address range which required that boot page
+ translation was always enabled while cores were in their spin loops.
+
+ - Allow the TLB window that the primary core uses to access the
+ secondary cores boot page to be placed at any address. Previously, a
+ TLB window at 0xfffff000 was always used to access the seconary cores'
+ boot page. This TLB address requirement overlapped with other
+ peripherals on some boards (eg XPedite5370). By default, the boot
+ page TLB will still use the 0xfffffxxx address range, but this can be
+ overridden on a board-by-board basis by defining a custom
+ CONFIG_BPTR_VIRT_ADDR. Note that the TLB used to map the boot page
+ remains in use while U-Boot executes. Previously it was only
+ temporarily used, then restored to its initial value.
+
+ - Allow Boot Page Translation to be disabled on bootup. Previously,
+ Boot Page Translation was always left enabled after secondary cores
+ were brought out of reset. This caused the 0xfffffxxx address range
+ to somewhat "magically" be translated to an address in SDRAM. Some
+ boards may not want this oddity in their memory map, so defining
+ CONFIG_MPC8xxx_DISABLE_BPTR will turn off Boot Page Translation after
+ the secondary cores are initialized.
+
+ These changes are only applicable to 85xx boards with CONFIG_MP defined.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 70ed869ea5f6b1d13d7b140c83ec0dcd8a127ddc
+Author: Vivek Mahajan <vivek.mahajan@freescale.com>
+Date: Tue Oct 27 12:18:55 2009 +0530
+
+ ppc/85xx/pci: fsl_pci_init: pcie agent mode support
+
+ Originally written by Jason Jin and Mingkai Hu for mpc8536.
+
+ When QorIQ based board is configured as a PCIe agent, then unlock/enable
+ inbound PCI configuration cycles and init a 4K inbound memory window;
+ so that a PCIe host can access the PCIe agents SDRAM at address 0x0
+
+ * Supported in fsl_pci_init_port() after adding pcie_ep as a param
+ * Revamped copyright in drivers/pci/fsl_pci_init.c
+ * Mods in 85xx based board specific pci init after this change
+
+ Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 273a28ad9ef59dcfcd4c056ec1f61f1e0896cfaa
+Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+Date: Tue Oct 27 09:36:38 2009 +0530
+
+ 85xx/p1_p2_rdb: Fixing DDR configuration for 800MHz data rate
+
+ Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 924024c396761c267b948f38d78e9905f2036501
+Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+Date: Tue Oct 27 09:26:55 2009 +0530
+
+ 85xx/p1_p2rdb: Fix crash while configuring 32 bit DDR i/f for P1020RDB.
+
+ The data being modified was in NOR flash which caused the crash.
+
+ Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2c0c58b92dbb68007061bdc0edd23bdf142efebf
+Author: Sergey Mironov <ierton@gmail.com>
+Date: Wed Sep 23 16:47:38 2009 +0400
+
+ Fix bug in jumptable call stubs for SPARC.
+
+ Signed-off-by: Sergey Mironov <ierton@gmail.com>
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+
+commit 3e303f748cf57fb23e8ec95ab7eac0074be50e2b
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Oct 15 17:47:04 2009 +0400
+
+ fdt_support: Add multi-serial support for stdout fixup
+
+ Currently fdt_fixup_stdout() is using hard-coded CONFIG_CONS_INDEX
+ constant. With multi-serial support, the CONS_INDEX may no longer
+ represent actual console, so we should try to extract port number
+ from the current stdio device name instead of always hard-coding the
+ constant value.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit da0e5f7ee828f246d85997486fff308837069453
+Author: Leon Woestenberg <leon.woestenberg@gmail.com>
+Date: Mon Oct 26 10:03:32 2009 +0100
+
+ ppc/85xx: Fix crashes due to generation of SPE instruction
+
+ U-Boot crashed on the last instruction:
+
+ int parse_stream_outer(struct in_str *inp, int flag)
+ {
+ effa4784: 94 21 ff 38 stwu r1,-200(r1)
+ effa4788: 7c 08 02 a6 mflr r0
+ effa478c: 42 9f 00 05 bcl- 20,4*cr7+so,effa4790 <parse_stream_outer+0xc>
+ effa4790: 7d 80 00 26 mfcr r12
+ effa4794: 13 c1 b3 21 evstdd r30,176(r1)
+
+ ...which is a SPE instruction, although -mno-spe was used.
+
+ tmp/cross/ppce500v2/bin/powerpc-angstrom-linux-gnuspe-gcc --version
+ powerpc-angstrom-linux-gnuspe-gcc (GCC) 4.3.3
+
+ Seems to be a known issue (since 2008-04?!)
+
+ Googled some, turns out this patch/workaround works for me on MPC8536DS.
+
+ See http://gcc.gnu.org/ml/gcc-patches/2008-04/msg00311.html for more info
+
+ Signed-off-by: Leon Woestenberg <leon@sidebranch.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 654ea1f3184235694306ddc5874baa27ad3018fe
+Author: Dave Liu <daveliu@freescale.com>
+Date: Thu Oct 22 00:10:23 2009 -0500
+
+ ppc/85xx: Make L2 support more robust
+
+ According the user manual, we need loop-check the L2 enable bit set.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 613ad28c3da4c7fc6336ef9d94993b25a5d0586e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Oct 26 21:21:25 2009 -0500
+
+ ppc/85xx: Fix compiler warning in nand_spl/.../p1_p2_rdb/nand_boot.c
+
+ nand_boot.c: In function 'board_init_f':
+ nand_boot.c:44: warning: 'sys_clk' may be used uninitialized in this function
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e8967d96a0e8d09d91a3b7bd292746996dd8e7ac
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Oct 26 21:18:33 2009 -0500
+
+ ppc/85xx: Fix building NAND_SPL out of tree
+
+ We need to source files to exist in the O=<FOO> nand_spl dir when
+ we build out of tree.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f3ee25859e3920ee7c7cc519a3e6f60d70d7a53f
+Author: Matthias Fuchs <matthias.fuchs@esd.eu>
+Date: Fri Oct 23 10:52:38 2009 +0200
+
+ License cleanup: Fix license header for some esd display configurations
+
+ These files were autogenerated by EPSON configuration tools.
+ This patch replaces the autogenerated file headers by the GPL
+ license notice.
+
+ This change is done with the explicit permission
+ of Epson Research & Development / IC Software Development.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+
+commit 4166ee58d30ada7b298b9c941067f0341c2dccbe
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Oct 9 17:12:44 2009 -0400
+
+ sf: add GPL-2 license info
+
+ Some of the new spi flash files were missing explicit license lines.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit d535a493004fb701f131b132402a7704f9c9342d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Oct 21 23:29:51 2009 -0500
+
+ fdt: Fix fdt padding issue for initrd mem_rsv
+
+ Its possible that we end up with a device tree that happens to be a
+ particular size that after we call fdt_resize() we don't have any
+ space left for the initrd mem_rsv.
+
+ Fix this be adding a second mem_rsv into the size calculation. We
+ had one to cover the fdt itself and we have the potential of adding
+ a second for the initrd.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 4bc3d2afb380e78fdbb9c501d9a8da6d59eb178e
+Author: Steve Sakoman <sakoman@gmail.com>
+Date: Tue Oct 20 18:21:18 2009 +0200
+
+ ARM: OMAP3: Refactors the SM911x driver
+
+ Move the test up in the function to not hang on systems without ethernet.
+
+ Signed-off-by: Steve Sakoman <sakoman@gmail.com>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit f3807374787e4394efb767e2e8527887f57e51b8
+Author: Minkyu Kang <mk7.kang@samsung.com>
+Date: Thu Oct 15 11:19:15 2009 +0900
+
+ s5pc1xx: SMDKC100: fix compile warnings
+
+ fix the following compile warnings
+ warning: dereferencing type-punned pointer will break strict-aliasing rules
+
+ Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
+
+commit 8003c361deec3ee651451662efd05352f1abdd40
+Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
+Date: Tue Oct 6 08:44:22 2009 +0200
+
+ arm926ejs: 8-byte align stack to avoid LDRD/STRD problems
+
+ U-boot for Marvell Kirkwood boards no longer work after the EABI changes
+ introduced in commit f772acf8a584067033eff1e231fcd1fb3a00d3d9. This
+ turns out to be caused by a stack alignment issue. The armv5te
+ instructions ldrd/strd instructions require 8-byte alignment to work
+ properly (otherwise undefined behavior).
+
+ Tested on an OpenRD base board, where both printouts and ubifs stuff now
+ works.
+
+ Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+
+commit e63e5904b48528f3f3cc98317df6fc62fab25bf9
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Sat Oct 17 12:41:06 2009 -0500
+
+ TI OMAP3 SDP3430: Initial Support
+
+ Start of support of
+ Texas Instruments Software Development Platform(SDP)
+ for OMAP3430 - SDP3430
+
+ Highlights of this platform are:
+ Flash Memory devices:
+ Sibley NOR, Micron 8bit NAND and OneNAND
+ Connectivity:
+ 3 UARTs and expanded 4 UART ports + IrDA
+ Ethernet, USB
+ Other peripherals:
+ TWL5030 PMIC+Audio+Keypad
+ VGA display
+ Expansion ports:
+ Memory devices plugin boards (PISMO)
+ Connectivity board for GPS,WLAN etc.
+ Completely configurable boot sequence and device mapping
+ etc.
+
+ Support default jumpering and:
+ - UART1/ttyS0 console(legacy sdp3430 u-boot)
+ - UART3/ttyS2 console (matching other boards,
+ and SDP HW docs)
+ - Ethernet
+ - mmc0
+ - NOR boot
+
+ Currently the UART1 is enabled by default. for
+ compatibility with other OMAP3 u-boot platforms,
+ enable the #define of CONSOLE_J9.
+
+ Conflicts:
+
+ Makefile
+
+ Fixed the conflict with smdkc100_config by moving omap_sdp3430_config
+ to it is alphabetically sorted location above zoom1.
+
+ Signed-off-by: David Brownell <david-b@pacbell.net>
+ Signed-off-by: Nishanth Menon <nm@ti.com>
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit a4474ff8629be5f28aefb8a9f48d4411d62fb0d2
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Tue Oct 13 19:35:11 2009 -0400
+
+ TI DaVinci: Adding Copyright for DM365 EVM
+
+ Forgot to add Copyright while submitting the patch.
+ This patch adds the copyright.
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+
+commit 11b0102218bbb50ac5c04f1521f2a22ed4e90cf1
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Tue Oct 13 12:32:32 2009 -0400
+
+ TI DaVinci: Fix DM6467 EVM Compilation Warning
+
+ Due to new TI boards being added to U-Boot, the hardware.h
+ is getting very messy. The warning being fixed is due to
+ the EMIF addresses being redefined.
+
+ The long term solution(after 2009.11) to this is to
+ have SOC specific header files.
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+
+commit fac1ef4ba685606bf28349d18e050ea08b50e669
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Tue Oct 13 12:01:52 2009 -0400
+
+ TI DaVinci: DM355 Leopard: Fix compilation warning
+
+ We get a compliation warning when we enable the NAND driver
+ for DM355 leopard. The waring we get is that we have
+ an implicit declaration of davinci_nand_init.
+
+ It is fixed by including the asm/arch/nand_defs.h header file
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+
+commit f8a812aa656bc34622303a26fa5003d19c34aeed
+Author: Nishanth Menon <nm@ti.com>
+Date: Tue Oct 13 12:49:55 2009 -0400
+
+ TI OMAP3: make gpmc_config as const
+
+ gpmc_config should not be a variant as it is board specific
+ hence make it a const parameter
+
+ Fixes issues identified by Dirk:
+ - build issue for zoom2
+ - warnings for all other OMAP3 platforms using nand/onenand etc
+
+ Signed-off-by: Nishanth Menon <nm@ti.com>
+
+commit cfc25874624a328f53ad59b1206e2103f2e62d74
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 19 16:19:36 2009 +0200
+
+ ppc4xx: Sequoia: Add chip_config command
+
+ This patch removes the Sequoia "bootstrap" command and replaces it
+ with the now common command "chip_config".
+
+ Please note that the patches with the dynamic PCI sync clock
+ configuration have to be applied, before this one should go in.
+ This is because Sequoia has 2 different bootstrap EEPROMs, and
+ the old bootstrap command configured different values depending
+ on the detected PCI async clock (33 vs. 66MHz). With the PCI sync
+ clock patches, this is not necessary anymore. The PCI sync clock
+ will be configured correctly on-the-fly now.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c85b58397030e25e146ccf5085c86221c40c53b3
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 19 14:14:08 2009 +0200
+
+ ppc4xx: Yosemite/Yellowstone: Check and reconfigure the PCI sync clock
+
+ This patch now uses the 440EP(x)/GR(x) function to check and dynamically
+ reconfigure the PCI sync clock.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 23c51a2d6393cd3be9eb62cb42d92138ff6db8a9
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 19 14:10:50 2009 +0200
+
+ ppc4xx: Sequoia/Rainer: Check and reconfigure the PCI sync clock
+
+ This patch now uses the 440EP(x)/GR(x) function to check and dynamically
+ reconfigure the PCI sync clock.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 08c6a2628478ace808b3767db17e4148cac5a7fb
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 19 14:44:11 2009 +0200
+
+ ppc4xx: Print PCI synchronous clock frequency upon bootup
+
+ Some 4xx variants (e.g. 440EP(x)/GR(x)) have an internal
+ synchronous PCI clock. Knowledge about the currently configured
+ value might be helpful. So let's print it out upon bootup.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5e47f9535f53fd4cc05f32fb6166870f976fbb4e
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 19 14:06:23 2009 +0200
+
+ ppc4xx: Add function to check and dynamically change PCI sync clock
+
+ PPC440EP(x)/PPC440GR(x):
+ In asynchronous PCI mode, the synchronous PCI clock must meet
+ certain requirements. The following equation describes the
+ relationship that must be maintained between the asynchronous PCI
+ clock and synchronous PCI clock. Select an appropriate PCI:PLB
+ ratio to maintain the relationship:
+
+ AsyncPCIClk - 1MHz <= SyncPCIclock <= (2 * AsyncPCIClk) - 1MHz
+
+ This patch now adds a function to check and reconfigure the sync
+ PCI clock to meet this requirement. This is in preparation for
+ some AMCC boards (Sequoia/Rainier and Yosemite/Yellowstone) using this
+ function to not violate the PCI clocking rules.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 92b8964bed0d1b779d9e26be4e16755b5c635415
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Oct 16 10:01:09 2009 +0200
+
+ ppc4xx: Update flash size in reg property of the NOR flash node
+
+ Till now only the ranges in the ebc node are updated with the values
+ currently configured in the PPC4xx EBC controller. With this patch now
+ the NOR flash size is updated in the device tree blob as well. This is
+ done by scanning the compatible nodes "cfi-flash" and "jedec-flash"
+ for the correct chip select number.
+
+ This size fixup is enabled for all AMCC eval board right now. Other
+ 4xx boards may want to enable it as well, if this problem with multiple
+ NOR FLASH sizes exists.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Wolfgang Denk <wd@denx.de>
+
+commit 30d45c0d3ea2231f9131276ea113595959a0720e
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Oct 21 11:59:52 2009 +0200
+
+ fdt: Add fdt_fixup_nor_flash_size() to fixup NOR FLASH size in dtb
+
+ This function can be used to update the size in the "reg" property
+ of the NOR FLASH device nodes. This is necessary for boards with
+ non-fixed NOR FLASH sizes.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+ Acked-by: Wolfgang Denk <wd@denx.de>
+
+commit 76706cb86b1c76954ff5353db6757ab99cfd95fb
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Oct 20 23:12:13 2009 +0200
+
+ cpu/ppc4xx/fdt.c: avoid strcpy() to constant string
+
+ strcpy() was iused with the target address being a pointer to a
+ constant string, which potentially is read-only. Use a (writable)
+ array of characters instead.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0e1ac981194aa0d92eff0934442cec48a4f57834
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Oct 20 23:07:04 2009 +0200
+
+ cpu/ppc4xx/fdt.c: avoid strcpy() to constant string
+
+ strcpy() was iused with the target address being a pointer to a
+ constant string, which potentially is read-only. Use a (writable)
+ array of characters instead.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c55096c084308c08bf8891c190f90bdc3a232394
+Author: Daniel Mack <daniel@caiaq.de>
+Date: Wed Apr 8 13:23:38 2009 +0200
+
+ smc911x: add support for LAN9220
+
+ Signed-off-by: Daniel Mack <daniel@caiaq.de>
+ Cc: Sascha Hauer <s.hauer@pengutronix.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit f67066b6b0740b826ed862615c5ab022aaf4779a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 18 20:43:14 2009 -0400
+
+ envcrc: check return value of fwrite()
+
+ Newer toolchains will often complain about unchecked fwrite():
+ envcrc.c:117: warning: ignoring return value of `fwrite´, declared
+ with attribute warn_unused_result
+
+ So check the return value to silence the warnings.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit efd988ebaa241bab265b1511052350207cb7aaa0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Oct 19 09:18:57 2009 +0200
+
+ mcc200: fix build error
+
+ Fix compile error:
+ include/configs/mcc200.h:401:6: error: #elif with no expression
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4e0539d2696992a5e32643a0c831e870cfe9a036
+Author: Nishanth Menon <nm@ti.com>
+Date: Tue Oct 13 12:47:39 2009 -0400
+
+ OMAP3: fix warnings when NAND/ONENAND is not used
+
+ Fix build warnings by putting specific used variables
+ under required #ifdefs for removing:
+ mem.c:227: warning: unused variable 'f_sec'
+ mem.c:226: warning: unused variable 'f_off'
+ mem.c:225: warning: unused variable 'size'
+ mem.c:224: warning: unused variable 'base'
+ mem.c:222: warning: unused variable 'gpmc_config'
+
+ Signed-off-by: Nishanth Menon <nm@ti.com>
+
+commit 73db0c71da365a2d101878ae3aeb8ff3545a1828
+Author: Nishanth Menon <nm@ti.com>
+Date: Tue Oct 13 12:47:24 2009 -0400
+
+ OMAP3: export enable_gpmc_cs_config to board files
+
+ Export enable_gpmc_cs_config into common header to
+ prevent warning:
+
+ warning: implicit declaration of function 'enable_gpmc_cs_config'
+
+ Signed-off-by: Nishanth Menon <nm@ti.com>
+
+commit 96a27c6dc29abf11740632ecd8ccab607b209c5d
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Mon Oct 12 12:07:40 2009 -0400
+
+ Zoom2 Fix serial gpmc setup
+
+ The offset to the chip select is incorrect.
+
+ The change 187af954cf7958c24efcf0fd62289bbdb4f1f24e,
+
+ omap3: embedd gpmc_cs into gpmc config struct
+
+ introduced a problem with the serial gpmc setup.
+
+ This patch reverts the chip select to its previous value.
+
+ The symptoms of this problem are that the Zoom2
+ currently hangs.
+
+ This was run tested on Zoom2.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit 64d945abe8cffbacdaeca5f63b9b84f895d2d9ab
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Sun Oct 11 09:10:27 2009 -0400
+
+ TI DaVinci Sonata: Add Config option for 64 bit Support
+
+ Adding the CONFIG_SYS_64BIT_VSPRINTF fot the DM644x based Sonata
+ Without this option enabled while performing NAND operations we will get
+ wrong diagnostic messages.
+ Example if the MTD NAND driver find a bad block while erasing from
+ a certain address, it will say bad block skipped at 0x00000000.
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+
+commit 54aa603d2ce1d9374a1f5c6336362037ad2d8b51
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Sun Oct 11 09:14:58 2009 -0400
+
+ TI DaVinci DVEVM: Add Config option for 64 bit Support
+
+ Adding the CONFIG_SYS_64BIT_VSPRINTF in the DVEVM config.
+ Without this option enabled while performing NAND operations we will get
+ wrong diagnostic messages.
+ Example if the MTD NAND driver find a bad block while erasing from
+ a certain address, it will say bad block skipped at 0x00000000.
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+
+commit b8d0aa0c78b8c0fa51acada3c486b81085924b53
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Sat Oct 10 10:19:20 2009 -0400
+
+ TI DaVinci DM365: Add Config option for 64 bit Support
+
+ Adding the CONFIG_SYS_64BIT_VSPRINTF in the DM365 EVM config.
+ Without this option enabled while performing NAND operations we will get
+ wrong diagnostic messages.
+ Example if the MTD NAND driver find a bad block while erasing from
+ a certain address, it will say bad block skipped at 0x00000000.
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+
+commit 86a725b9c8b829c217be90e590f3ca2c91fa1dca
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Sat Oct 10 10:18:46 2009 -0400
+
+ TI DaVinci DM355: Add Config option for 64 bit Support
+
+ Adding the CONFIG_SYS_64BIT_VSPRINTF in the DM355 EVM config.
+ Without this option enabled while performing NAND operations we will get
+ wrong diagnostic messages.
+ Example if the MTD NAND driver find a bad block while erasing from
+ a certain address, it will say bad block skipped at 0x00000000.
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+
+commit 9c44ddccb6602f620fc037974f3e4468ad8a7c0c
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Wed Sep 9 11:50:40 2009 -0400
+
+ TI: OMAP3: Remove SZ_xx references
+
+ This patch removes dependency on the sizes.h header file
+ and removes all references to SZ_xx.
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+
+commit 13d2cb988ff07addce6e10ab2cb8965a9dd23c63
+Author: Steve Sakoman <sakoman@gmail.com>
+Date: Sat Oct 10 14:29:37 2009 -0400
+
+ OMAP3: Update Overo and Beagle environment
+
+ Update default environment to support new kernel DSS2 subsystem and
+ simplify rootfs type and location changes.
+
+ Signed-off-by: Steve Sakoman <sakoman@gmail.com>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit c73607c5525c6957c815e64f7e865fdd3baffe98
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Sat Oct 10 13:46:26 2009 -0400
+
+ TI DaVinci: Maintainer for DM355 and DM365 EVM
+
+ Adding entries to the MAINTAINERS directory for the
+ DM355 and DM365 EVM.
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+
+commit 5df65cf56aeef9fdeab83a259c37aa7d23836dd3
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Sat Oct 10 13:37:10 2009 -0400
+
+ TI: DaVinci: DM355 Leopard board support
+
+ This patch adds support for the leopard board which is
+ based on the DM355 SOC.
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+
+commit 6ab176d7091d21960a1bd89fcb7fd87b9e91aca1
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Sat Oct 10 12:00:47 2009 -0400
+
+ TI DaVinci DM646x: Adding initial support for DM6467 EVM
+
+ This patch adds the initial support for DM6467 EVM.
+ Other features like NET and NAND support will be added as follow up patches.
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+
+commit d884f64a7b8482f6c9688600e0a4731fa5678e0c
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Thu Oct 1 20:22:09 2009 -0400
+
+ TI DaVinci DM365: Fix Compilation warning for DM365 EVM
+
+ This patch fixes a compilation warning while compiling
+ the DM365 EVM.
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+
+commit 6fe5e87be4b944edf428835210056e020c8bb794
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Thu Oct 1 20:21:13 2009 -0400
+
+ TI DaVinci DM355: Fix Compilation warning for DM355 EVM
+
+ This patch fixes a compilation warning while compiling
+ the DM355 EVM.
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+
+commit 513bbe1b1720682e6de0aba2d9db5e60f3a428bb
+Author: Eric Benard <eric@eukrea.com>
+Date: Mon Oct 12 10:15:39 2009 +0200
+
+ AT91 CPUAT91 Fix compiler warning
+
+ This change fixes the compiler warning
+
+ main.c: In function 'abortboot':
+ main.c:122: warning: too few arguments for format
+
+ Signed-off-by: Eric Benard <eric@eukrea.com>
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit b1e81f701d044eee3884202b127d5d1f0668bdb9
+Author: Eric Benard <eric@eukrea.com>
+Date: Mon Oct 12 10:15:40 2009 +0200
+
+ AT91 CPU9260 CPU9G20 Fix compile warnings
+
+ This change fixes the compiler warning
+
+ nand_util.c:45:2: warning: #warning Please define CONFIG_SYS_64BIT_VSPRINTF
+ for correct output!
+
+ Signed-off-by: Eric Benard <eric@eukrea.com>
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit 94d50c527a3cedb6a41fbe6773256cdd1855317f
+Author: Eric Benard <eric@eukrea.com>
+Date: Mon Oct 12 10:08:20 2009 +0200
+
+ AT91 CPU9260 Fix machine ID when using a CPU9G20.
+
+ Signed-off-by: Eric Benard <eric@eukrea.com>
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit 8c0a92c8f4cf399e873c2611939f3617983785a9
+Author: Alessandro Rubini <rubini@unipv.it>
+Date: Sat Oct 10 11:51:26 2009 +0200
+
+ lcd: remove '#if 0' 32-bit scroll, now memcpy does it
+
+ Signed-off-by: Alessandro Rubini <rubini@unipv.it>
+ Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
+
+commit e3ea948d4588e7efddbf0ee92147d93f827d7cea
+Author: Alessandro Rubini <rubini@unipv.it>
+Date: Sat Oct 10 11:51:16 2009 +0200
+
+ lib_generic memset: fill one word at a time if possible
+
+ If the destination is aligned, fill ulong values until possible.
+ Then fill remaining part by byte.
+
+ Signed-off-by: Alessandro Rubini <rubini@unipv.it>
+ Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
+ Acked-by: Mike Frysinger <vapier@gentoo.org>
+
+commit ecd830b863e5c6ac5d804d3b3a92453a98d526fc
+Author: Alessandro Rubini <rubini@unipv.it>
+Date: Sat Oct 10 11:51:05 2009 +0200
+
+ lib_generic memcpy: copy one word at a time if possible
+
+ If source and destination are aligned, this copies ulong values
+ until possible, trailing part is copied by byte. Thanks for the details
+ to Wolfgang Denk, Mike Frysinger, Peter Tyser, Chris Moore.
+
+ Signed-off-by: Alessandro Rubini <rubini@unipv.it>
+ Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
+ Acked-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 9c5586aa19bbedf290d2a663813404d2db87dfa5
+Author: Alessandro Rubini <rubini@unipv.it>
+Date: Thu Oct 8 14:29:14 2009 +0200
+
+ setenv: do console redirection even if previously unset
+
+ If "stdout" is not previously set, doing "setenv stdout lcd" had no
+ effect, since console redirection only worked if the environment
+ variable was already set; the second time you run setenv it worked.
+ Most default environments lack stdin/out/err definitions, so I'm sure
+ I'm not alone with this problem.
+
+ This patch simply moves a block of code out of a conditional, to do
+ the same work even if the variable was previously unset.
+
+ Signed-off-by: Alessandro Rubini <rubini@unipv.it>
+ Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
+
+commit c9ee39972a7758e883b73c6c0e3c3a14cd5b2f43
+Author: Martha Stan <mmarx@silicontkx.com>
+Date: Wed Oct 7 04:38:46 2009 -0400
+
+ mpc512x: fix System Clock Control constants for USB1 & USB2
+
+ Signer-off-by: Martha Stan <mmarx@silicontkx.com>
+
+commit 87b22b7787f397fc3daad570d711e478b1a7d253
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Fri Oct 2 18:18:33 2009 -0400
+
+ mem_mtest: fix error reporting, allow escape with ^C
+
+ The basic memtest function tries to watch for ^C after each
+ pattern pass as an escape mechanism, but if things are horribly
+ wrong, we'll be stuck in an inner loop flooding the console with
+ error messages and never check for ^C. To make matters worse,
+ if the user waits for all the error messages to complete, we
+ then incorrectly report the test passed without errors.
+
+ Adding a check for ^C after any error is printed will give
+ the end user an escape mechanism from a console flood without
+ slowing down the overall test speed on a slow processor.
+
+ Also, the more extensive memtest quit after just a single error,
+ which is inconsistent with the normal memtest, and not useful if
+ if you are doing dynamic environmental impact testing, such as
+ heating/cooling etc.
+
+ Both tests now track the error count and report it properly
+ at test completion.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Acked-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 9f4a420663419dc13f08a0ce65b93033c6172c69
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Oct 1 12:11:54 2009 -0400
+
+ new default shortcut to config & build a board
+
+ The majority of the time that I build things in U-Boot, I want to just
+ build for the board. I don't make board config tweaks after selecting the
+ board. So add a new pattern rule that allows people to combine two steps
+ in one go:
+ `make foo_config && make` => `make foo`
+
+ This shouldn't conflict with any existing make rules as the pattern rule
+ is used only the rule doesn't already exist.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 6dab6add2d8ee80905234b326abc3de11be1d178
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Sep 30 15:29:58 2009 -0400
+
+ env: only build env_embedded and envcrc when needed
+
+ The env code is protected by the ENV_IS_EMBEDDED define, so attempting to
+ compile the code when this isn't defined is pointless. Now that the env
+ headers have unified around CONFIG_ENV_IS_EMBEDDED, convert the build
+ system to only build the env objects when this is enabled. And now that
+ the env code is conditionally compiled, we can drop the source code checks.
+
+ For people who want to extract the environment manually, add a new option
+ CONFIG_BUILD_ENVCRC that only enables the envcrc utility.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 78f4ca7976748159080c9d920d5eb542d1b32d4f
+Author: Daniel Mack <daniel@caiaq.de>
+Date: Mon Sep 28 11:40:38 2009 +0200
+
+ part_dos: check status flags of partitions
+
+ Only read partitions which have 0x00 or 0x80 set in their status field.
+ All others are invalid.
+
+ Signed-off-by: Daniel Mack <daniel@caiaq.de>
+
+commit 45def0ab9d1dedcd2a73939aad8373f760498762
+Author: Eric Millbrandt <emillbrandt@coldhaus.com>
+Date: Fri Sep 25 17:47:43 2009 -0500
+
+ galaxy5200: change cs1 configuration
+
+ Correct the chip select configuration for the nand flash chip select.
+
+ Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
+
+commit 7936b51165b519a16ecf3db302fb88df8b8b3b3d
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Wed Sep 23 08:12:14 2009 +0200
+
+ Cleanup: use constant
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 7120c888101952b7e61b9e54bb42370904aa0e68
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Mon Oct 12 11:06:19 2009 -0500
+
+ mpc83xx: mpc8313 - handle erratum IPIC1 (TSEC IRQ number swappage)
+
+ mpc8313e erratum IPIC1 swapped TSEC interrupt ID numbers on rev. 1
+ h/w (see AN3545). The base device tree in use has rev. 1 ID numbers,
+ so if on Rev. 2 (and higher) h/w, we fix them up here.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+ Reviewed-by: Roland Lezuo <roland.lezuo@chello.at>
+
+commit 91525c67153fcf2c19b2fc8d9c6376ac1a019f52
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Mon Oct 12 23:55:39 2009 +0400
+
+ mpc85xx: Fix booting on various boards
+
+ commit 0e870980a64584a591af775bb9c9fe9450124df9 ("8xxx: Removed
+ CONFIG_NUM_CPUS from 85xx/86xx") breaks U-Boot on various boards,
+ namely the ones that call get_sys_info() from board_early_init_f().
+
+ get_sys_info() calls cpu_numcores(), which depends on probecpu()
+ being called before. But probecpu() is called after board_early_init_f(),
+ and so cpu_numcores() returns random values, which in turn crashes
+ get_sys_info().
+
+ To fix the issue we place probecpu() before board_early_init_f()
+ in an initialization sequence.
+
+ Booting on the following boards should be revived now:
+ mpc8540ads
+ mpc8541cds
+ mpc8548cds
+ mpc8555cds
+ mpc8560ads
+ mpc8568mds
+ mpc8569mds
+ and maybe more.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 26df6aa9916443077139f8f008fbc5f414ba05e5
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Fri Oct 2 18:48:07 2009 -0400
+
+ mpc86xx: delete unused MPC86xx_DDR_SDRAM_CLK_CNTL define
+
+ This is an orphaned legacy leftover that is just polluting
+ the config file namespace.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit fad15096e3b34927444ba5f6133742d40d78a425
+Author: Dipen Dudhat <dipen.dudhat@freescale.com>
+Date: Thu Oct 8 13:33:29 2009 +0530
+
+ ppc/P1_P2_RDB: On-chip BootROM support
+
+ On Chip BootROM support for P1 and P2 series RDB platforms.
+
+ This patch is derived from latest On Chip BootROM support on MPC8536DS
+
+ Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f7780ec977e545b83bc5068e0957d640f1d98f13
+Author: Dipen Dudhat <dipen.dudhat@freescale.com>
+Date: Thu Oct 8 13:33:18 2009 +0530
+
+ ppc/P1_P2_RDB: NAND Boot Support
+
+ NAND Boot support for P1 and P2 series RDB platforms.
+
+ This patch is derived from NAND Boot support on MPC8536DS.
+
+ Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d11823ca3cb551814ffcd926402c8bcf3a7eff35
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Wed Oct 7 16:34:28 2009 -0400
+
+ mpc8xxx: improve LAW error messages when setting up DDR
+
+ When setting up the LAWs for the DDR, if there was an error,
+ you got the not-so-helpful error text "ERROR" and nothing
+ else. Not only is it non-informative, but it is also
+ pretty frustrating trying to grep for "ERROR" in the source.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a9946e3fc7089ddc6b7711a44e07a6b0827b79a7
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Wed Sep 30 16:12:31 2009 -0400
+
+ sbc8641d: fix LAW so board doesn't hang on DDR init
+
+ All versions between now and since this commit:
+
+ commit bd76729bcbfd64b5d016a9b936f058931fc06eaf
+ MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default
+
+ will fail to allow the SBC8641D to get past DDR init, because the
+ LAW config was overlapping. Eventually this board will do SPD
+ EEPROM config, but for now this gets the board working again.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3d1988ab47cc0e265272967e07d747ec600a44c9
+Author: kevin.morfitt@fearnside-systems.co.uk <kevin.morfitt@fearnside-systems.co.uk>
+Date: Sat Oct 10 13:34:09 2009 +0900
+
+ Clean-up of s3c24x0 nand driver
+
+ This patch re-formats the arm920t s3c24x0 nand driver in preparation for changes
+ to add support for the Embest SBC2440-II Board.
+
+ The changes are as follows:
+ - re-indent the code using Lindent
+ - make sure register layouts are defined using a C struct
+ - replace the upper-case typedef'ed C struct names with lower case
+ non-typedef'ed ones
+ - make sure registers are accessed using the proper accessor functions
+ - run checkpatch.pl and fix any error reports
+
+ It assumes the following patch has been applied first:
+ - [U-Boot][PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards, 05/09/2009
+ - patches 1/4, 2/4 and 3/4 of this series
+
+ Tested on an Embest SBC2440-II Board with local u-boot patches as I don't have
+ any s3c2400 or s3c2410 boards but need this patch applying before I can submit
+ patches for the SBC2440-II Board. Also, temporarily modified sbc2410x, smdk2400,
+ smdk2410 and trab configs to use the mtd nand driver (which isn't used by any
+ board at the moment), ran MAKEALL for all ARM9 targets and no new warnings or
+ errors were found.
+
+ Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk>
+ Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
+
+commit eb0ae7f549b7142826a8bcdd2dc945fac9c36349
+Author: kevin.morfitt@fearnside-systems.co.uk <kevin.morfitt@fearnside-systems.co.uk>
+Date: Sat Oct 10 13:33:11 2009 +0900
+
+ Clean-up of s3c24x0 drivers excluding nand driver
+
+ This patch re-formats the arm920t s3c24x0 driver files, excluding the nand
+ driver, in preparation for changes to add support for the Embest SBC2440-II Board.
+
+ The changes are as follows:
+ - re-indent the code using Lindent
+ - make sure register layouts are defined using a C struct
+ - replace the upper-case typedef'ed C struct names with lower case
+ non-typedef'ed ones
+ - make sure registers are accessed using the proper accessor functions
+ - run checkpatch.pl and fix any error reports
+
+ It assumes the following patch has been applied first:
+ - [U-Boot][PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards, 05/09/2009
+ - patches 1/4 and 2/4 of this series
+
+ Tested on an Embest SBC2440-II Board with local u-boot patches as I don't have
+ any s3c2400 or s3c2410 boards but need this patch applying before I can submit
+ patches for the SBC2440-II Board. Also, temporarily modified sbc2410x, smdk2400,
+ smdk2410 and trab configs to use the mtd nand driver (which isn't used by any
+ board at the moment), ran MAKEALL for all ARM9 targets and no new warnings or
+ errors were found.
+
+ Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk>
+ Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
+
+commit 8250d0bae84229abea397f6b474b3556b0f04e80
+Author: kevin.morfitt@fearnside-systems.co.uk <kevin.morfitt@fearnside-systems.co.uk>
+Date: Sat Oct 10 13:32:01 2009 +0900
+
+ Clean-up of s3c24x0 header files
+
+ This patch re-formats the arm920t s3c24x0 header files in preparation for
+ changes to add support for the Embest SBC2440-II Board.
+
+ The changes are as follows:
+ - re-indent the code using Lindent
+ - make sure register layouts are defined using a C struct
+ - replace the upper-case typedef'ed C struct names with lower case
+ non-typedef'ed ones
+ - make sure registers are accessed using the proper accessor functions
+ - run checkpatch.pl and fix any error reports
+
+ It assumes the following patch has been applied first:
+ - [U-Boot][PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards, 05/09/2009
+ - patch 1/4 of this series
+
+ Tested on an Embest SBC2440-II Board with local u-boot patches as I don't have
+ any s3c2400 or s3c2410 boards but need this patch applying before I can submit
+ patches for the SBC2440-II Board. Also, temporarily modified sbc2410x, smdk2400,
+ smdk2410 and trab configs to use the mtd nand driver (which isn't used by any
+ board at the moment), ran MAKEALL for all ARM9 targets and no new warnings or
+ errors were found.
+
+ Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk>
+ Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
+
+commit d67cce2dda3a40c3bd90a6c6e129fbb26dd4cfab
+Author: kevin.morfitt@fearnside-systems.co.uk <kevin.morfitt@fearnside-systems.co.uk>
+Date: Sat Oct 10 13:30:22 2009 +0900
+
+ Clean-up of cpu_arm920t and cpu_arm920t_s3c24x0 code
+
+ This patch re-formats the code in cpu/arm920t and cpu/arm920t/23c24x0 in
+ preparation for changes to add support for the Embest SBC2440-II Board.
+
+ The changes are as follows:
+ - re-indent the code using Lindent
+ - make sure register layouts are defined using a C struct
+ - replace the upper-case typedef'ed C struct names with lower case
+ non-typedef'ed ones
+ - make sure registers are accessed using the proper accessor functions
+ - run checkpatch.pl and fix any error reports
+
+ It assumes the following patch has been applied first:
+ - [U-Boot][PATCH-ARM] CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards, 05/09/2009
+
+ Tested on an Embest SBC2440-II Board with local u-boot patches as I don't have
+ any s3c2400 or s3c2410 boards but need this patch applying before I can submit
+ patches for the SBC2440-II Board. Also, ran MAKEALL for all ARM9 targets and no
+ new warnings or errors were found.
+
+ Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk>
+ Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
+
+commit cd85662b345c0c2248fd7637f65bb2fbb4d53dd9
+Author: kevin.morfitt@fearnside-systems.co.uk <kevin.morfitt@fearnside-systems.co.uk>
+Date: Sun Sep 6 00:33:13 2009 +0900
+
+ CONFIG_SYS_HZ fix for ARM902T S3C24X0 Boards
+
+ This sets CONFIG_SYS_HZ to 1000 for all boards that use the s3c2400 and
+ s3c2410 cpu's which fixes various problems such as the timeouts in tftp being
+ too short.
+
+ Tested on an Embest SBC2440-II Board with local u-boot patches as I don't
+ have any s3c2400 or s3c2410 boards but need this patch applying before I can
+ submit patches for the SBC2440-II Board. Also, ran MAKEALL for all ARM9 targets
+ and no new warnings or errors were found.
+
+ It was originally submitted on 21/06/2009 but didn't get into the 2009.08
+ release, and Jean-Pierre made one comment on the original patch (see
+ http://lists.denx.de/pipermail/u-boot/2009-July/055470.html). I've made two
+ changes to the original patch:
+ - it's been re-based to the current release
+ - I've re-named get_timer_raw() to get_ticks() in response to Jean-Pierre's comment
+
+ This affects the sbc2410, smdk2400, smdk2410 and trab boards. I've copied it
+ directly to the maintainers of all except the sbc2410 which doesn't have an
+ entry in MAINTAINERS.
+
+ Signed-off-by: Kevin Morfitt <kmorfitt@aselaptop-1.localdomain>
+ Tested-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
+
+commit 8bc4ee9e8213abe4031ea1720aa02fa98d4402ad
+Author: Minkyu Kang <mk7.kang@samsung.com>
+Date: Thu Oct 1 17:20:40 2009 +0900
+
+ s5pc1xx: add support SMDKC100 board
+
+ Adds new board SMDKC100 that uses s5pc100 SoC
+
+ Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
+ Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com>
+
+commit dd2c9e6a3b67c8ff56694e515e6e3c7baddd8f52
+Author: Minkyu Kang <mk7.kang@samsung.com>
+Date: Thu Oct 1 17:20:28 2009 +0900
+
+ s5pc1xx: support serial driver
+
+ This patch includes the serial driver for s5pc1xx.
+ s5pc1xx uart driver needs own register setting and clock configuration.
+ So, need to special driver.
+
+ Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
+
+commit 4678d674f0cacc983dca7f6b9933cd8291c9797c
+Author: Minkyu Kang <mk7.kang@samsung.com>
+Date: Thu Oct 1 17:20:08 2009 +0900
+
+ s5pc1xx: support onenand driver
+
+ This patch includes the onenand driver for s5pc100
+
+ Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 399e5ae0d0b2eb4663fc5784201968c07d45afac
+Author: Minkyu Kang <mk7.kang@samsung.com>
+Date: Thu Oct 1 17:20:01 2009 +0900
+
+ s5pc1xx: support Samsung s5pc1xx SoC
+
+ This patch adds support for the Samsung s5pc100 and s5pc110
+ SoCs. The s5pc1xx SoC is an ARM Cortex A8 processor.
+
+ Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
+ Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com>
+
+commit d087d19a994e741f0ce526124be117c90be482ae
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Oct 13 21:58:26 2009 -0400
+
+ Blackfin: drop MAC display at boot
+
+ The default Blackfin boot would display the MAC address for the first NIC,
+ but this relies on the environment. The current net multi stack no longer
+ writes the default hardware settings to the environment, so most of the
+ time the display shows all zeros. This can be pretty confusing and really
+ doesn't add anything useful, so just drop it.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 1f003cf4738a199d99c818124784058526d2d40e
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Oct 9 02:24:33 2009 -0400
+
+ Blackfin: reset watchdog in udelay()
+
+ All arches apparently should reset the watchdog in their udelay loop as
+ noted on the mailing list recently:
+
+ > A comment in flash_status_check() suggests that udelay() is
+ > expected to reset the watchdog, but I can't find any architecture
+ > where it does.
+
+ If this is missing in other architectures, it should be fixed at the
+ root cause, i. e. in udelay() or in the respective support routines.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 370ec734557d0b0f266e6d0953229ee12cae5edd
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Oct 9 02:22:11 2009 -0400
+
+ Blackfin: Remove relocation fixups
+
+ Blackfin pieces like commit 0630535e2d062dd73c1ceca5c6125c86d1127a49.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit a380279b2abe130c2d3d2c8de36f8ff98bc6b3b0
+Author: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
+Date: Tue Sep 29 08:03:12 2009 +0200
+
+ at91: Update MEESC board support
+
+ This patch implements several updates:
+ -disable CONFIG_ENV_OVERWRITE
+ -add new hardware style variants and set the arch numbers appropriate
+ -pass the serial# and hardware revision to the kernel
+ -removed unused macros from include/configs/meesc.h
+ -fixed multiline comment style
+
+ Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
+
+commit 9df20ce211576aa7ac75710dcd8d0a6236abfd70
+Author: Simon Kagstrom <[simon.kagstrom@netinsight.net]>
+Date: Thu Oct 1 19:41:50 2009 +0530
+
+ arm: Correct build with CONFIG_SYS_HUSH_PARSER set
+
+ FLAG_PARSE_SEMICOLON is not defined without hush.h, so include that.
+
+ Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+commit df3826262c0efd2baec4df23d44b3942af98f5a7
+Author: Olof Johansson <olof@lixom.net>
+Date: Tue Sep 29 10:22:45 2009 -0400
+
+ TI: OMAP3: Overo Tobi ethernet support
+
+ Add setup for ethernet on Tobi, allowing kernel/ramdisk to be loaded
+ over tftp.
+
+ This also refactors the smc911x driver to allow for detecting when the
+ chip is missing. I.e. the detect_chip() function is called earlier and
+ will abort gracefully when the Chip ID read returns all 1's.
+
+ Signed-off-by: Olof Johansson <olof@lixom.net>
+ Acked-by: Dirk Behme <dirk.behme@googlemail.com>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 2a6cc97b91997ae485312ac91ffbcea6a89b663a
+Author: Olof Johansson <olof@lixom.net>
+Date: Tue Sep 29 10:21:29 2009 -0400
+
+ SMC911X: Add chip auto detection
+
+ Refactor the smc911x driver to allow for detecting when the chip is missing.
+ I.e. the detect_chip() function is called earlier and will abort gracefully
+ when the Chip ID read returns all 1's.
+
+ Signed-off-by: Olof Johansson <olof@lixom.net>
+ Acked-by: Dirk Behme <dirk.behme@googlemail.com>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 0297ec7e2a4039b8a28346f52f3ccca4db1ddc62
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Tue Sep 29 10:19:49 2009 -0400
+
+ TI OMAP3 Use arm init sequence to initialize i2c
+
+ This changes fixes an early i2c error.
+
+ It appears that I2C is working because once a read or write
+ error is detected, the omap24xx_i2c driver calls i2c_init
+ inside its error handling check.
+
+ While it is ok to attempt error handling this way, the boards
+ must not depend on this side effect to initialize it's i2c.
+
+ Instead of explicitly calling i2c_init for every board, use
+ the generic arm initialization in lib_arm/board.c. By defining
+ the config variable CONFIG_HARD_I2C, the omap3 i2c initialization
+ is included in the init_sequence table.
+
+ Run tested on Beagle.
+ Compile tested on the omap3's
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+ Acked-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 4df30f3bb7285b2c962713a5c693c16fd90885e0
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Tue Sep 29 09:43:04 2009 -0400
+
+ TI: DaVinci DM365: Enabling network Support on DM365 EVM
+
+ This patch enables EMAC on the DM365 EVM.
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+ Acked-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit 00e1665a3cf956e09ac2ce86ef6ec459f6bfb33c
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Tue Sep 29 10:02:38 2009 -0400
+
+ TI: DaVinci: GPIO header file and definitions
+
+ Some DaVinci SOC's use GPIOs to enable EMAC and DM9000.
+ This patch adds some definitions for GPIO registers and also adds
+ structures for GPIO.
+ A separate header file is being added so that in future we
+ can have a DaVinci GPIO driver similer to OMAP.
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+ Acked-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit 95ae803afbdd9f673c94b992ea624a10d252afc2
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Fri Sep 18 17:30:05 2009 -0400
+
+ TI: DaVinci DM646x: Update flag used to represent DM646x SOC's
+
+ In the DaVinci specific code, we use both CONFIG_SOC_DM646X and
+ CONFIG_SOC_DM646x to represent DM646x specific code.
+ This patch changes occurrences of CONFIG_SOC_DM646x to
+ CONFIG_SOC_DM646X. This is because for DM644x series of SOCs we use
+ the flag CONFIG_SOC_DM644X. We want some uniformity.
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+ Acked-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit fc9165fdb3b021aa8ff02417692220fe9344072b
+Author: Olof Johansson <olof@lixom.net>
+Date: Mon Sep 28 08:19:30 2009 -0400
+
+ OMAP3: Clean up whitespace in mux configs
+
+ Switch from space-based indentation to tab-based in mux configs, as pointed
+ out by WD at:
+
+ http://lists.denx.de/pipermail/u-boot/2009-September/061241.html
+
+ Nothing but whitespace changes in this patch (diff -w gives no output).
+
+ Signed-off-by: Olof Johansson <olof@lixom.net>
+
+commit 9de0212bd7c4c82a7e8c2a2c8714f8c7abc57d08
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Mon Sep 28 08:17:50 2009 -0400
+
+ OMAP3 MMC: Fix warning dereferencing type-punned pointer
+
+ Fix warning
+ Dereferencing type-punned pointer will break strict-aliasing rules
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+ CC: Steve Sakoman <sakoman@gmail.com>
+ Acked-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit e92daeb5c2050438402b87c7d614e8a13c294348
+Author: Simon Kagstrom <[simon.kagstrom@netinsight.net]>
+Date: Tue Sep 22 04:01:01 2009 +0530
+
+ Support for the OpenRD base board
+
+ The implementation is borrowed from the sheevaplug board and the Marvell
+ 1.1.4 code. Unsupported (or untested) is the SD card, PCIe and SATA.
+
+ Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+
+commit a62e78fc444c67f958be48891bef3dab0e9eb285
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Mon Sep 21 20:15:17 2009 +0530
+
+ Kirkwood: mv88f6281gtw_ge: Add kwbimage build support
+
+ This patch adds kwbimage configuration file
+ (used by mkimage utility)
+ to support u-boot.kwb target on mv88f6281gtw_ge board.
+
+ To create Kirkwood boot image to be flashed on SPI Flash,
+ additional parameter u-boot.kwb need to be passed during make.
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+commit 5bc7cbc15b1890682c0b279f708914518bd25f8d
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Mon Sep 21 18:23:11 2009 +0530
+
+ Kirkwood: rd6281a: Add kwbimage build support
+
+ This patch adds kwbimage configuration file
+ (used by mkimage utility)
+ to support u-boot.kwb target on rd6281a platform.
+
+ To create Kirkwood boot image to be flashed on NAND,
+ additional parameter u-boot.kwb need to be passed during make.
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+commit 23b80982a02a43bf4ead91574c9d6f1b647ccc8f
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Sun Sep 27 11:10:09 2009 -0500
+
+ Add support for Eukrea CPU9260/CPU9G20 SBC
+
+ these boards are built around Atmel's AT91SAM9260/9G20 and have
+ up to 64MB of NOR flash, up to 128MB of SDRAM, up to 2GB of NAND
+ and include a 10/100 Ethernet PHY in RMII mode.
+
+ Signed-off-by: Eric Benard <eric@eukrea.com>
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit d8380c9d35e88759c96e68a03738446ca0cb292f
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Sun Sep 27 07:47:24 2009 -0500
+
+ Add support for Eukrea CPUAT91 SBC
+
+ CPUAT91 is built around Atmel's AT91RM9200 and has up to 16MB of NOR
+ flash, up to 128MB of SDRAM, and includes a Micrel KS8721 PHY in RMII
+ mode.
+
+ Signed-off-by: Eric Benard <eric@eukrea.com>
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit eb95aa15e644c29b01832703aa4964fe419170f0
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Mon Sep 14 14:57:47 2009 -0400
+
+ TI: DaVinci DM365: Minor config cleanup
+
+ The DM365 config was using the 'CONFIG_CMD_SAVEENV' flag.
+ This is already included when we include the
+ config_cmd_default.h header file. So this flag is removed.
+ Also another flag to enable NAND functions was being
+ enabled incorrectly.
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+
+commit 5d783c1ffd691ffdadbc2c2f796c41481b7cdce7
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Mon Sep 14 15:03:06 2009 -0400
+
+ TI DaVinci DM365: Removing header file which does not exist
+
+ The DaVinci DM365 EVM board specific code was including a header file
+ which does not exist. So removing this header file.
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+
+commit 409ec37bd8ae8822d276e77419d899571891b191
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Tue Sep 8 18:08:06 2009 -0400
+
+ TI DaVinci: DM355: Config Cleanup and Update
+
+ This patch does the following
+ 1) Enables the NAND driver which is now available.
+ 2) Enables the 'CONFIG_MTD_DEVICE' as without this the
+ compilation will fail
+ 3) We now have a safe place to store environment and defines
+ an offset where this can be stored. This offset value is such that it is after
+ the location where U-Boot is flashed using TI flash utilities.
+ 4) Enables Bootdelay
+ 5) Increases malloc() arena size. Manufacturers are coming out with
+ NAND with large blocks sizes of upto 1 MiB. It has been noticed that
+ as the block size of the NAND used is increased, if this particular
+ value is not increased, the NAND driver will output out of memory
+ errors.
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+
+commit 7908c97a106765ad8816bf2271a5bf315728b274
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Tue Sep 8 11:37:39 2009 -0400
+
+ TI DaVinci: DM646x: Initial Support for DM646x SOC
+
+ DM646x is an SOC from TI which has both an ARM and a DSP.
+ There are multiple variants of the SOC mainly dealing with different
+ core speeds.
+ This patch adds the initial framework for the DM646x SOC.
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+
+commit 5d0f53624c24eaf82d58368a6a5b8476392dd5c7
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Wed Sep 9 15:26:00 2009 -0400
+
+ TI DaVinci: DM6446: Fix Compilation error in NAND mode
+
+ The Default mode that is built for the Davinci DVEVM happens
+ to be the NOR mode.
+ When we want to build for the NAND mode, we get a compilation
+ error. This is overcome by defining the CONFIG_MTD_DEVICE
+ flag in the NAND mode.
+ The image built for NAND mode was successfully tested on the
+ DaVinci DM6446 EVM.
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+
+commit 7a2aa8b68120f333ed2edc33475ca195810d6cb1
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Thu Sep 10 15:27:57 2009 -0400
+
+ OMAP3 Move cache routine to cache.S
+
+ v7_flush_dcache_all, because it depends on omap ROM code is not
+ generic. Rename the function to 'invalidate_dcache' and move it
+ to the omap cpu directory.
+
+ Collect the other omap cache routines l2_cache_enable and
+ l2_cache_disable with invalide_dcache into cache.S. This
+ means removing the old cache.c file that contained l2_cache_enable
+ and l2_cache_disable.
+
+ The conversion from cache.c to cache.S was done most through
+ disassembling the uboot binary. The only significant change was
+ to change the comparision for the return of get_cpu_rev from
+
+ cmp r0, #0
+ beq earlier_than_label
+
+ Which was lost information to
+
+ cmp r0, #CPU_3XX_ES20
+ blt earlier_than_label
+
+ The paths through the enable routine were verified by
+ adding an infinite loop and seeing the hang. Then
+ removing the infinite loop and seeing it continue.
+
+ The disable routine is similar enough that it was not
+ tested with this method.
+
+ Run tested by cold booting from nand on beagle and zoom1.
+ Compile tested on MAKEALL arm.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit a16df2c11188297eca43cf6080c70fb69b960232
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Tue Sep 8 17:09:52 2009 -0400
+
+ TI DaVinci: Remove references to SZ_xx
+
+ This patch removes the asm/sizes.h header file from being
+ included in the DaVinci SOC configs.
+ References to SZ_xx have been replaced by appropriate
+ bit shifted values.
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+ Acked-by: Wolfgang Denk <wd@denx.de>
+
+commit 285870f75378aca41c5063e4358ad93bf3014fd8
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Thu Oct 9 01:27:18 2008 -0500
+
+ Leave x86emu op code tables in default section
+
+ Forcing the tables into got2 caused extra relocation when using -mrelocatable.
+ This patch requires any board defining CONFIG_BIOSEMU to use -mrelocatable.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Acked-by: Jin Zhengxiong <Jason.Jin@freescale.com>
+
+commit be2254423b86572841aa70ff05d20933d1b49823
+Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+Date: Sat Oct 10 12:42:22 2009 +0200
+
+ Update all board to support new bbmiiphy driver (with multibus support)
+
+ Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 310cecb8ccdbc8a9be580e75b2fd362179d78535
+Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+Date: Sat Oct 10 12:42:21 2009 +0200
+
+ Add bb_miiphy_init call before any ethernet bring-up code.
+
+ Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 4ba31ab33ac824635fcb49ac609070a9ebcab7f0
+Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+Date: Sat Oct 10 12:42:20 2009 +0200
+
+ Rewrite the miiphybb (Bit-banged MII bus driver) in order to support an arbitrary number of mii buses.
+
+ This feature is useful when your board uses different mii buses for different
+ phys and all (or a part) of these buses are implemented via bit-banging mode.
+
+ The driver requires that the following macros should be defined into the board
+ configuration file:
+
+ CONFIG_BITBANGMII - Enable the miiphybb driver
+ CONFIG_BITBANGMII_MULTI - Enable the multi bus support
+
+ If the CONFIG_BITBANGMII_MULTI is not defined, the board's config file needs
+ to define at least the following macros:
+
+ MII_INIT - Generic code to enable the MII bus (optional)
+ MDIO_DECLARE - Declaration needed to access to the MDIO pin (optional)
+ MDIO_ACTIVE - Activate the MDIO pin as out pin
+ MDIO_TRISTATE - Activate the MDIO pin as input/tristate pin
+ MDIO_READ - Read the MDIO pin
+ MDIO(v) - Write v on the MDIO pin
+ MDC_DECLARE - Declaration needed to access to the MDC pin (optional)
+ MDC(v) - Write v on the MDC pin
+
+ The previous macros make the driver compatible with the previous version
+ (that didn't support the multi-bus).
+
+ When the CONFIG_BITBANGMII_MULTI is also defined, the board code needs to fill
+ the bb_miiphy_buses[] array with a record for each required bus and declare
+ the bb_miiphy_buses_num variable with the number of mii buses.
+ The record (struct bb_miiphy_bus) has the following fields/callbacks (see
+ miiphy.h for details):
+
+ char name[] - The symbolic name that must be equal to the MII bus
+ registered name
+ int (*init)() - Initialization function called at startup time (just
+ before the Ethernet initialization)
+ int (*mdio_active)() - Activate the MDIO pin as output
+ int (*mdio_tristate)() - Activate the MDIO pin as input/tristate pin
+ int (*set_mdio)() - Write the MDIO pin
+ int (*get_mdio)() - Read the MDIO pin
+ int (*set_mdc)() - Write the MDC pin
+ int (*delay)() - Delay function
+ void *priv - Private data used by board specific code
+
+ The board code will look like:
+
+ struct bb_miiphy_bus bb_miiphy_buses[] = {
+ { .name = miibus#1, .init = b1_init, .mdio_active = b1_mdio_active, ... },
+ { .name = miibus#2, .init = b2_init, .mdio_active = b2_mdio_active, ... },
+ ...
+ int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) /
+ sizeof(bb_miiphy_buses[0]);
+
+ Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit efaf6f1bf6ebdd8f16b0d0c2960abe8d06f95af4
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Fri Oct 2 18:54:20 2009 -0400
+
+ mpc83xx: cosmetic comment update relating to SPD EEPROM
+
+ commit 6d0f6bcf337c5261c08fabe12982178c2c489d76 did the big
+ rename of CFG_ macros to CONFIG_SYS macros. But it missed
+ a couple of instances within comments.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit afc3ba0fc4195624e79e21244380ed7cc2fd6969
+Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+Date: Thu Oct 8 02:03:51 2009 +0200
+
+ relocation: Do not relocate NULL pointers.
+
+ NULL is an absolute value and should not be relocated.
+ After this correction code like:
+ void weak_fun(void) __attribute__((weak));
+ printf("weak_fun:%p\n", weak_fun);
+ will still print null after relocation.
+
+ Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+
+commit 3beb40c2473f0dd373231c723d88c51e46ad96f7
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Oct 7 11:45:00 2009 -0500
+
+ 85xx: Ensure BSS segment isn't linked at address 0
+
+ When U-Boot is relocated from flash to RAM pointers are modified
+ accordingly. However, pointers initialzed with NULL values should not
+ be modified so that they maintain their intended NULL value. If the
+ BSS segment is linked at address 0 its address will not be
+ updated as necessary during relocation.
+
+ This is a temporary workaround. The end goal is to add support to
+ U-Boot to dynamically locate the BSS at an arbitrary address at
+ runtime. When the ability to fixup the BSS inteligently is
+ added, this workaround can be removed and the 85xx link script
+ can put the BSS at a fixed address at link time.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 95c44ec485b46ffb43dbdaa299f1491a500fdadf
+Author: Detlev Zundel <dzu@denx.de>
+Date: Wed Oct 7 16:38:05 2009 +0200
+
+ tqm5200: Correct comment and code in post_hotkeys_pressed.
+
+ This fixes the code and the comment according to the original intent of
+ doing an intensive memory test when PSC6_3 is pulled low on the STK52xx.
+ Notably PORT_CONFIG will be overridden with this correct code now,
+ so beware.
+
+ The original code only worked by coincidence depending on the PORT_CONFIG
+ setting from the header file. The new code was tested to ensure that the
+ (undocumented) memory test still works on the STK52x.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+ CC: Martin Krause <Martin.Krause@tqs.de>
+
+ Minor white-space cleanup.
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit da01f53404f99db185d196867af79371725d4683
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Oct 4 22:56:08 2009 +0200
+
+ mpc512x: fix fixed_sdram() init code.
+
+ Commit 054197ba and later fixes used an array to initialize some of
+ the MDDRC parameters; however, the use of an array turned out to be a
+ bad idea as it was not possible to correlate structure entries to
+ array indices in readable and reliable way. Now we use a struct
+ instead, which makes this self-explanatory.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit dbcc357166bed20df13450e93a501f30b197efd1
+Author: Niklaus Giger <niklaus.giger@member.fsf.org>
+Date: Sun Oct 4 20:04:22 2009 +0200
+
+ ppc4xx: respect 80-chars per line in ppc*.h files
+
+ After running checkstyle.pl on the three previous patches I noted that in
+ the *.h files there were a lot of long lines. This patch solves this problem.
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 78d2a641371ec71cc3786b167a318c7b115fbb90
+Author: Niklaus Giger <niklaus.giger@member.fsf.org>
+Date: Sun Oct 4 20:04:21 2009 +0200
+
+ ppc4xx: Rework cmd reginfo
+
+ The command "reginfo" got an overhaul for the ppc4xx. It dumps all the
+ relevant HW configuration registers (address, symbolic name, content).
+ This allows to easily detect errors in *.h files and changes in the HW
+ configuration.
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ddc922ff2c20ae0b7f9ce2df1ac28143e2f325bd
+Author: Niklaus Giger <niklaus.giger@member.fsf.org>
+Date: Sun Oct 4 20:04:20 2009 +0200
+
+ ppc_4xx: Apply new HW register names
+
+ Modify all existing *.c files to use the new register names
+ as seen in the AMCC manuals.
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f80e61dcfe53fa3a5936659883415c9bd1b5a3d9
+Author: Niklaus Giger <niklaus.giger@member.fsf.org>
+Date: Sun Oct 4 20:04:19 2009 +0200
+
+ ppc4xx: Cleanup some HW register names
+
+ Here you find all the changes in the include directory for new register names
+ and adapting other ones to the names used by AMCC in their manuals, e.g.
+ For 440EPx/GRPPC440EPx/GRX, Revision 1.15 – September 22, 2008
+ For PPC405GP Embedded Processor, Revision 1.02 – March 22, 2006
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 56f14818f66c68a8b9e45925f29ceb974405ad48
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Oct 6 07:21:08 2009 +0200
+
+ ppc4xx: Add PPC405EX(r) Rev D support
+
+ Unfortunately some Rev D PPC405EX/405EXr PVR's are identical with older
+ 405EX(r) parts. Here a list:
+
+ 0x12911475 - 405EX Rev D with Security *and* 405EX Rev A/B witout Sec
+ 0x12911473 - 405EX Rev D without Security *and* 405EXr Rev A/B with Sec
+
+ Since there are only a few older parts in the field, this patch now
+ changes the PVR's above to represent the new Rev D versions.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Phong Vo" <pvo@amcc.com>
+
+commit 06dfaeef52a5f773ae4292432e3c74ff52ead316
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Oct 2 14:35:16 2009 +0200
+
+ ppc4xx: Fix msg "initialization as root-complex failed" upon PCIe scan
+
+ This message is printed upon PCIe bus scan, not only upon error, but also
+ if no PCIe device is detected at all. Since this is not an error, let's
+ remove this message in this case. We already have the message
+ "link is not up." if there is no PCIe device present.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Acked-by: Wolfgang Denk <wd@denx.de>
+
+commit 54f5f056aa1daa3e39bad1c5c3fb43a72cdb9e84
+Author: Mike Nuss <mike@terascala.com>
+Date: Mon Oct 5 12:33:28 2009 -0400
+
+ PPC4xx: Denali core: Fix incorrect DDR row bits
+
+ The SPD detection code for the Denali memory controller used on some
+ ppc4xx
+ processors incorrectly encodes DDR0_42. With certain memory
+ configurations,
+ this can cause the bootwrapper to incorrectly calculate the installed
+ memory
+ size, because the number of row bits is wrong. This patch fixes that
+ encoding.
+
+ Signed-off-by: Mike Nuss <mike@terascala.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 99dbd4efd6d5ecc37d7e8f28b20d9be8c83055c7
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Mon Oct 5 00:02:51 2009 -0700
+
+ Add information about return values of xxx_eth_register() in documentation
+
+ As discussed on mailing list, <0 indicates failure, >=0 indicates number
+ of interfaces found.
+
+ Also added blurb about private data
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 1f1e774ec6242d4ea34e5cff57232deb5bb587e0
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Sep 9 14:41:22 2009 -0400
+
+ document network driver framework
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit aba8237257dd15b0e76cc517f0e741c0908ee0b9
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Wed Sep 9 15:59:19 2009 +0530
+
+ net: kirkwood_egiga.c: fixed build warning
+
+ if link up detection code is disabled through config option, it gives build warning.
+ This patch fixes the same
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 7194ab809532eeca3e2ee5dc12017cb901cc5842
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Oct 4 22:37:03 2009 -0700
+
+ Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
+
+ All in-tree boards that use this controller have CONFIG_NET_MULTI
+ added
+ Also:
+ - changed CONFIG_DRIVER_SMC91111 to CONFIG_SMC91111
+ - cleaned up line lengths
+ - modified all boards that override weak function in this driver
+ - modified all eeprom standalone apps to work with new driver
+ - updated blackfin standalone EEPROM app after testing
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 32e7f239dda8638377edb0d3e7ac269cabbafbe6
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Mon Sep 21 20:28:18 2009 +0530
+
+ net: phy: mv88e61xx.c : fixed build warning
+
+ following build warning was observed
+
+ mv88e61xx.c: In function ‘mv88e61xx_busychk’:
+ mv88e61xx.c:208: warning: dereferencing type-punned pointer will break strict-aliasing rules
+
+ This patch fixes the same
+ Patch tested for rd6281a board build
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit c0b46d8ead3c6c5b569c83544fd71b9d73356869
+Author: James Clough <james@rtetc.com>
+Date: Thu Sep 10 09:11:50 2009 +0200
+
+ net: Fix problem with 405EZ ethernet interrupt
+
+ On 405EZ the RX-/TX-interrupts are coalesced into one IRQ bit in the
+ UIC. We need to acknowledge the RX-/TX-interrupts in the
+ SDR0_ICINTSTAT reg as well.
+
+ This problem was introduced with commit
+ d1631fe1 [ppc4xx: Consolidate PPC4xx UIC defines]
+
+ Signed-off-by: James Clough <james@rtetc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 91b469c95faf92435e3d5d78292ba78075a3c5ca
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Sep 2 04:18:55 2009 -0400
+
+ net: add random_port() prototype
+
+ The random_port() is meant to be used by other net code, but without a
+ prototype, we get fun warnings like:
+ dns.c: In function 'DnsSend':
+ dns.c:89: warning: implicit declaration of function 'random_port'
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3469424cb6d939c7aedf1e0efdec44a797c0a18c
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Sep 21 11:20:37 2009 -0500
+
+ ppc: Remove reloc_off field from global_data structure
+
+ Now that proper relocation is supported, the reloc_off field is no longer
+ necessary.
+
+ Note that the location of the standalone application jump table pointer
+ in the global data structure is affected by this change, breaking
+ execution of standalone applications compiled for previous versions of
+ U-Boot.
+
+ We therefore increment XF_VERSION to 6
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0630535e2d062dd73c1ceca5c6125c86d1127a49
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Sep 22 09:27:55 2009 -0500
+
+ arm/microblaze/nios/nios2/sh: Remove relocation fixups
+
+ These architectures don't need relocation fixups, so reduce their
+ codesize a bit by defining CONFIG_RELOC_FIXUP_WORKS.
+
+ Also remove the reloc_off field from their global data structures
+ as it is no longer needed.
+
+ Note that the location of the standalone application jump table pointer
+ in the global data structure is affected by this change, breaking
+ execution of standalone applications compiled for previous versions of
+ U-Boot. We will therefore increment XF_VERSION in the next commit,
+ which also touches this area.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 521af04d853361b49344b61892eb0618f9f713c5
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Sep 21 11:20:36 2009 -0500
+
+ Conditionally perform common relocation fixups
+
+ Add #ifdefs where necessary to not perform relocation fixups. This
+ allows boards/architectures which support relocation to trim a decent
+ chunk of code.
+
+ Note that this patch doesn't add #ifdefs to architecture-specific code
+ which does not support relocation.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 3cbcfa70b116df1bbdc90ba31c61adcaec058a8a
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Sep 21 11:20:35 2009 -0500
+
+ p3mx: Remove serial relocation fixups
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 80f73b92a19129854876ec3f1aef531a09e86d2d
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Sep 21 11:20:34 2009 -0500
+
+ lwmon, lwmon5: Remove sysmon POST relocation fixups
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 331ab60c4a418c39e5b1a05d4648a4155d0ad13e
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Sep 21 11:20:33 2009 -0500
+
+ mpl: Remove memory test relocation fixups
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 6385b28116f775da4771b768ba9bf93c3aaaf26e
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Sep 21 11:20:32 2009 -0500
+
+ fpga: Remove relocation fixups
+
+ PPC boards are the only users of the current FPGA code which is littered
+ with manual relocation fixups. Now that proper relocation is supported
+ for PPC boards, remove FPGA manual relocation.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit cd1011db80287eef933d1599b74cff1116c93134
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Sep 21 11:20:31 2009 -0500
+
+ tsec: Remove PHY command relocation fixups
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit b5650c5d8c99100144d8e4e9af910405f857bb7a
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Sep 21 11:20:30 2009 -0500
+
+ ppc: Remove board-specific command table relocation fixups
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit e6b05e774d7ce1641613cdeffb69c1d48139a869
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Sep 21 11:20:29 2009 -0500
+
+ ppc: Remove extable relocation fixups
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit b32a894011b1436758905fa10e6a03b8539c43c9
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Sep 21 11:20:28 2009 -0500
+
+ ppc: Remove pci config table pointer relocation fixups
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit a0e2066f392782730f0398095e583c87812d97f2
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Sep 21 11:20:27 2009 -0500
+
+ ppc: Remove board.c relocation fixups
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 244615197469dd6fe75ae082f38424b97c79aeaf
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Sep 21 11:20:26 2009 -0500
+
+ ppc: Check for compilers that don't support relocation
+
+ Certain ppc compilers are known not to generate the .fixup section
+ properly. The .fixup section is necessary to create a relocatable
+ U-Boot image. A basic check for the existence of the .fixup section
+ should hopefully catch the majority of broken compilers which don't
+ support relocation.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 858290178f222d998b6425d85cf06822467918f3
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Sep 21 11:20:25 2009 -0500
+
+ ppc: Enable full relocation to RAM
+
+ The following changes allow U-Boot to fully relocate from flash to
+ RAM:
+ - Remove linker scripts' .fixup sections from the .text section
+ - Add -mrelocatable to PLATFORM_RELFLAGS for all boards
+ - Define CONFIG_RELOC_FIXUP_WORKS for all boards
+
+ Previously, U-Boot would partially relocate, but statically initialized
+ pointers needed to be manually relocated.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 3b4bd2d75c4b3c1a4570f47ffaaed66f56a78ff4
+Author: Matthias Fuchs <matthias.fuchs@esd.eu>
+Date: Wed Sep 30 11:55:04 2009 +0200
+
+ ppc4xx: Add SDRAM detection for PMC440 boards
+
+ This patch adds support to detect the amount of DDR2 SDRAM
+ on PMC440 modules. Detection is done by probing through
+ a list of available and supported hardware configurations
+ from 1GByte down to 256MB.
+
+ The static TLB entry is replaced by dynamically created entries.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit fb95169e39f2d03270bed552d27bbb02627a443e
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Sep 28 17:33:45 2009 +0200
+
+ ppc4xx: Merge PPC4xx DDR and DDR2 ECC handling
+
+ This patch merges the ECC handling (ECC parity byte writing) into one
+ file (ecc.c) for all PPC4xx SDRAM controllers except for PPC440EPx/GRx.
+ This exception is because only those PPC's use the completely different
+ Denali SDRAM controller core.
+
+ Previously we had two routines to generate/write the ECC parity bytes.
+ With this patch we now only have one core function left.
+
+ Tested on Kilauea (no ECC) and Katmai (with and without ECC).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Felix Radensky <felix@embedded-sol.com>
+ Cc: Grant Erickson <gerickson@nuovations.com>
+ Cc: Pieter Voorthuijsen <pv@prodrive.nl>
+
+commit d24bd2517a2b847f773453eab0ee5b1c8ebc74ba
+Author: Felix Radensky <felix@embedded-sol.com>
+Date: Sun Sep 27 23:56:12 2009 +0200
+
+ ppc4xx: Reorganize DDR2 ECC handling
+
+ Reorganize DDR2 ECC handling to use common code for
+ SPD DIMMs and soldered SDRAM. Also, use common code
+ to display SDRAM info (ECC, CAS latency) for SPD and
+ soldered SDRAM variants.
+
+ Signed-off-by: Felix Radensky <felix@embedded-sol.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 46a887949e11d2cddb91e17ca47e73341d71a379
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Sep 30 03:09:16 2009 -0400
+
+ Blackfin: update default console= settings
+
+ The Linux kernel has changed the way it numbers serial ports, so update
+ the default command line to match it.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 4c5f307d58604dea001cccf388aa077a902ab0a5
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Sep 21 18:04:49 2009 -0400
+
+ Blackfin: bf533-ezkit: update env location
+
+ The u-boot image has outgrown the current space and overflowed into the
+ env sector. So move the env to the next available sector (we've already
+ allocated the first few sectors anyways for u-boot).
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 24b17d8a3c3a4b9ceaf6363ebe0021011b0b8bd8
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Sep 30 08:39:44 2009 -0500
+
+ ppc/85xx: get_law_entry isn't used in CONFIG_NAND_SPL
+
+ Don't include get_law_entry as part of the NAND_SPL build since the
+ code isnt used.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 693a048d8ac191181f5b9adbff642d3f1bbd479f
+Author: Mingkai Hu <Mingkai.hu@freescale.com>
+Date: Wed Sep 23 15:20:39 2009 +0800
+
+ Add README.mpc8536ds
+
+ Add boot from NAND/eSDHC/eSPI description
+
+ Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e40ac4870c6e72302044e98338322f45c34435bd
+Author: Mingkai Hu <Mingkai.hu@freescale.com>
+Date: Wed Sep 23 15:20:38 2009 +0800
+
+ On-chip ROM boot: MPC8536DS support
+
+ The MPC8536E is capable of booting from the on-chip ROM - boot from
+ eSDHC and boot from eSPI. When power on, the porcessor excutes the
+ ROM code to initialize the eSPI/eSDHC controller, and loads the mian
+ U-Boot image from the memory device that interfaced to the controller,
+ such as the SDCard or SPI EEPROM, to the target memory, e.g. SDRAM or
+ L2SRAM, then boot from it.
+
+ The memory device should contain a specific data structure with control
+ word and config word at the fixed address. The config word direct the
+ process how to config the memory device, and the control word direct
+ the processor where to find the image on the memory device, or where
+ copy the main image to. The user can use any method to store the data
+ structure to the memory device, only if store it on the assigned address.
+
+ The on-chip ROM code will map the whole 4GB address space by setting
+ entry0 in the TLB1, so the main image need to switch to Address space 1
+ to disable this mapping and map the address space again.
+
+ This patch implements loading the mian U-Boot image into L2SRAM, so
+ the image can configure the system memory by using SPD EEPROM.
+
+ Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9a1a0aedbbd56f901bfbc124f18ec6d9dcefe282
+Author: Mingkai Hu <Mingkai.hu@freescale.com>
+Date: Wed Sep 23 15:20:37 2009 +0800
+
+ NAND boot: MPC8536DS support
+
+ MPC8536E can support booting from NAND flash which uses the
+ image u-boot-nand.bin. This image contains two parts: a 4K
+ NAND loader and a main U-Boot image. The former is appended
+ to the latter to produce u-boot-nand.bin. The 4K NAND loader
+ includes the corresponding nand_spl directory, along with the
+ code twisted by CONFIG_NAND_SPL. The main U-Boot image just
+ like a general U-Boot image except the parts that included by
+ CONFIG_SYS_RAMBOOT.
+
+ When power on, eLBC will automatically load from bank 0 the
+ 4K NAND loader into the FCM buffer RAM where CPU can execute
+ the boot code directly. In the first stage, the NAND loader
+ copies itself to RAM or L2SRAM to free up the FCM buffer RAM,
+ then loads the main image from NAND flash to RAM or L2SRAM
+ and boot from it.
+
+ This patch implements the NAND loader to load the main image
+ into L2SRAM, so the main image can configure the RAM by using
+ SPD EEPROM. In the first stage, the NAND loader copies itself
+ to the second to last 4K address space, and uses the last 4K
+ address space as the initial RAM for stack.
+
+ Obviously, the size of L2SRAM shouldn't be less than the size
+ of the image used. If so, the workaround is to generate another
+ image that includes the code to configure the RAM by SPD and
+ load it to L2SRAM first, then relocate the main image to RAM
+ to boot up.
+
+ Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 07355700523203c5f72018712cf0d93683f255c8
+Author: Mingkai Hu <Mingkai.hu@freescale.com>
+Date: Wed Sep 23 15:19:32 2009 +0800
+
+ mpc8536: fix board config file line length
+
+ Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit dd9ca98f2600000e5c2744735040100b770650e7
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Fri Sep 25 11:14:11 2009 -0400
+
+ sbc8548: reclaim wasted sector in boot flash
+
+ By nature of being based off the MPC8548CDS board, this
+ board inherited an ENV_SIZE setting of 256k. But since
+ it has a smaller flash device (8MB soldered on), it has
+ a native sector size of 128k, and hence the ENV_SIZE was
+ causing 2 sectors to be used for the environment.
+
+ By removing the unused sector, we can push TEXT_BASE up
+ closer to the end of address space and reclaim that
+ sector for any other application. This also fixes the
+ mismatch between TEXT_BASE and MONITOR_LEN reported by
+ Kumar earlier.
+
+ Since this board also supports the ability to boot off
+ the 64MB SODIMM flash, this change is forward looking
+ with that in mind; i.e. the settings for MONITOR_LEN
+ and ENV_SIZE will work when the 512k sectors of the
+ SODIMM flash are used for alternate boot in the future.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8280912e0657e96a7b7d8da7003656d62b0fd109
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Sep 28 21:38:00 2009 -0500
+
+ ppc/85xx: Clean up immap_85xx.h
+
+ * Converted all white space to tabs
+ * Converted all types to u8/u16/u32
+ * Reduce lines to fit in 80 columns
+ * Renamed MPC85xx_{Q,B}MAN -> FSL_CORENET_{Q,B}MAN
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d44e9c1736283f0abc5d3c5d28cfea8480c93a79
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Sep 28 16:33:18 2009 -0500
+
+ NAND: davinci: Fix warnings when 4-bit ECC not used
+
+ I accidentally left v2 of "NAND: DaVinci:Adding 4 BIT ECC support"
+ applied when I pushed the tree last merge window, and missed these fixes
+ which were in v3 of that patch.
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit ca6189db484882798f2a35a476c07e618e21f6d3
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Tue Sep 22 09:05:00 2009 +0900
+
+ Refactor OneNAND IPL code
+
+ Refactoring the OneNAND IPL code
+
+ and some minor fixed:
+ - Remove unnecessary header file
+ - Fix wrong access at read interrupt
+ - The recent OneNAND has 4KiB pagesize
+
+ Also Board can override OneNAND IPL image
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit a05e3f9a084fc8951d87745b3a91df246432df7d
+Author: Shinya Kuribayashi <skuribay@pobox.com>
+Date: Sat Sep 12 18:01:40 2009 +0900
+
+ MIPS: VCT: Remove read_spareram reference
+
+ The commit ecad289fc6bd9d89ef4d5093cc7b6fd712fd0d29 (OneNAND: Remove
+ unused read_spareram and add unlock_all as kernel does) forgot to remove
+ a local reference to read_spareram in board/micronas/vct/ebi_onenand.c,
+ which causes the following build failure when configured with OneNAND:
+
+ ebi_onenand.c: In function 'onenand_board_init':
+ ebi_onenand.c:196: error: 'struct onenand_chip' has no member named 'read_spareram'
+ make[1]: *** [ebi_onenand.o] Error 1
+ make[1]: *** Waiting for unfinished jobs....
+ make: *** [board/micronas/vct/libvct.a] Error 2
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+ Cc: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit ef37c6835eac66206a9c7c11f0c7186f5d64bf91
+Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
+Date: Fri Sep 25 14:05:57 2009 +0200
+
+ ubifs: Correct dereferencing of files-after-symlinks
+
+ Files in directories which are symlinked to were not dereferenced
+ correctly in last commit. E.g., with a symlink
+
+ /boot/lnk -> /boot/real_dir
+
+ loading
+
+ /boot/lnk/uImage
+
+ will fail. This patch fixes that by simply seeing to it that the target
+ base directory has a slash after it.
+
+ Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b306db2f1bf561b5823a655c677fe28cfad80cfb
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Sep 24 14:10:30 2009 +0200
+
+ ppc4xx: Remove mtsdram0() marcos and use common mtsdram() instead
+
+ Additionally some whitespace coding style fixes.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 95b602bab5fec2fffab07a01ea3947c70d1bacc1
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Sep 24 13:59:57 2009 +0200
+
+ ppc4xx: Convert PPC4xx SDRAM defines from lower case to upper case
+
+ The latest PPC4xx register cleanup patch missed some SDRAM defines.
+ This patch now changes lower case UIC defines to upper case. Also
+ some names are changed to match the naming in the IBM/AMCC users
+ manuals (e.g. mem_mcopt1 -> SDRAM0_CFG).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 952e7760bfc5b0e3b142b9ce34e7fbb7d008c900
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Sep 24 09:55:50 2009 +0200
+
+ ppc4xx: Convert PPC4xx UIC defines from lower case to upper case
+
+ The latest PPC4xx register cleanup patch missed the UIC defines.
+ This patch now changes lower case UIC defines to upper case.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d1c9e5b37901b53ffc1ce3f08ec8ed61bfd557b6
+Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+Date: Tue Sep 22 13:40:44 2009 +0200
+
+ fsl_i2c: Do not generate STOP after read.
+
+ __i2c_read always ends with a STOP condition thereby releasing
+ the bus. It is cleaner to do the STOP magic in i2c_read(), like
+ i2c_write() does. This may also help future multimaster systems which
+ wants to hold on to the bus until all transactions are finished.
+
+ Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+
+commit 99404202127346b9e91503bbd69deafa18c980c4
+Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+Date: Thu Sep 17 11:07:17 2009 +0200
+
+ fsl_i2c: Impl. AN2919, rev 5 to calculate FDR/DFSR
+
+ The latest AN2919 has changed the way FDR/DFSR should be calculated.
+ Update the driver according to spec. However, Condition 2
+ is not accounted for as it is not clear how to do so.
+
+ Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+ Acked-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit d01ee4db9302cfccaa5c548a1c4e873b415681a0
+Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+Date: Thu Sep 17 11:07:16 2009 +0200
+
+ fsl_i2c: Add CONFIG_FSL_I2C_CUSTOM_{DFSR/FDR}
+
+ Some boards need a higher DFSR value than the spec currently
+ recommends so give these boards the means to define there own.
+
+ For completeness, add CONFIG_FSL_I2C_CUSTOM_FDR too.
+
+ Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+
+commit 21f4cbb77299788e2b06c9b0f48cf20a5ab00d4a
+Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+Date: Thu Sep 17 11:07:15 2009 +0200
+
+ fsl_i2c: Wait for STOP condition to propagate
+
+ After issuing a STOP one must wait until the STOP has completed
+ on the bus before doing something new to the controller.
+
+ Also add an extra read of SR as the manual mentions doing that
+ is a good idea.
+
+ Remove surplus write of CR just before a write, isn't required and
+ could potentially disturb the I2C bus.
+
+ Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+
+commit c7190f028fa950d4d36b6d0b4bb3fc72602ec54c
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Sep 25 18:19:44 2009 -0500
+
+ mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfields
+
+ some LCRR bits are not documented throughout the 83xx family RMs.
+ New board porters copying similar board configurations might omit
+ setting e.g., DBYP since it was not documented in their SoC's RM.
+
+ Prevent them bricking their board by retaining power on reset values
+ in bit fields that the board porter doesn't explicitly configure
+ via CONFIG_SYS_<registername>_<bitfield> assignments in the board
+ config file.
+
+ also move LCRR assignment to cpu_init_r[am] to help ensure no
+ transactions are being executed via the local bus while CLKDIV is being
+ modified.
+
+ also start to use i/o accessors.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 00ec0ff549b8cb6fb6d40e275aeb5a460642a3bd
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Mon Sep 21 17:44:51 2009 -0400
+
+ sbc8349: tidy up Makefile to use new configuration script.
+
+ Commit 804d83a5 allows us to move all the configuration
+ variation tweaks out of the top level Makefile and down
+ into the board config header. This takes advantage of
+ that for the sbc8349 board.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit da6eea0f48c24a318e6de69d6bca0bb5ab70572b
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Wed Sep 16 23:22:08 2009 +0400
+
+ mpc83xx: mpc8360emds: Add QE USB device tree fixups
+
+ With this patch we can change QE USB mode without need to hand-edit
+ the device tree.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 89da44ce3fe1638312d71cb3add8c6a6d2c7c1f3
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Wed Sep 16 23:21:59 2009 +0400
+
+ mpc83xx: mpc8360emds: Use RGMII-ID mode, add workarounds for rev. 2.1 CPUs
+
+ This patch fixes various ethernet issues with gigabit links handling
+ in U-Boot. The workarounds originally implemented by Kim Phillips for
+ Linux kernel.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 034477bb31948d698d18b84bc0834c3e25a14d04
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Wed Sep 16 23:21:57 2009 +0400
+
+ mpc83xx: mpc8360emds: Don't use LBC SDRAM when DDR is available
+
+ Since commit 5c2ff323a94e27e481f70c44838d43fcd844dd46 ("mpc8360emds:
+ rework LBC SDRAM setup"), LBC SDRAM is available for use in Linux.
+
+ Though, it appears that QE Ethernet in Gigabit mode can't transmit
+ large packets when it tries to work with a data in LBC SDRAM (memtest
+ didn't discover any issues, is LBC SDRAM just too slow?).
+
+ With this patch we can still use the board without DDR memory, but
+ if DDR is available, we don't use LBC SDRAM.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit d77c779bc23596aa3693d1c5c4d5b6e1072f93f2
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Wed Sep 16 23:21:55 2009 +0400
+
+ net: uec: Fix uccf.h and uec.h headers to include headers they depend on
+
+ Headers should include headers containing prototypes and defines they
+ depend on, don't assume that they're included by somebody else.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 6185f80c311cc3bdef2f8d5096c61e40ca6f48b2
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Wed Sep 16 23:21:53 2009 +0400
+
+ net: uec_phy: Implement TXID and RXID RGMII modes for Marvell PHYs
+
+ This will be needed for MPC8360E-MDS boards with rev. 2.1 CPUs.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 984f10baac8ef6032df52f135943d6b0bc96f724
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Sep 25 14:16:00 2009 +0200
+
+ mpc5121ads: fix breakage introduced when reordering elpida_mddrc_config[]
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6e748ea004473cce99fbde6382dd580c10ffdb60
+Author: Ken MacLeod <ken@bitsko.slc.ut.us>
+Date: Fri Sep 11 15:16:18 2009 -0500
+
+ cmd_fdt.c: fix parse of byte streams and strings
+
+ Commit 4abd844d8e extended the fdt command parser to handle property
+ strings which are split across multiple arguments but it was broken for
+ byte streams and strings.
+
+ Byte stream parsing:
+
+ * Fixes where it would terminate early or go into an endless loop.
+
+ * Fixes a 0x00 being inserted into the data if there is a space after
+ '[' or a separate argument.
+
+ * Fixes dereferencing the argument pointer after the last argument.
+
+ * Checks for bad characters.
+
+ String parsing:
+
+ * Treat multiple arguments as a string list. This fixes an issue where
+ only the last argument was stored.
+
+ Signed-off-by: Ken MacLeod <ken@bitsko.slc.ut.us>
+
+commit 3887c3fbdbbe6bbb4df60ed415c8e1ab9fe56b5e
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Sep 23 07:56:08 2009 +0200
+
+ mucmc52, uc101: delete ata@3a00 node, if no CF card is detected
+
+ U-Boot can detect if an IDE device is present or not.
+ If not, and this new config option is activated, U-Boot
+ removes the ATA node from the DTS before booting Linux,
+ so the Linux IDE driver does not probe the device and
+ crash. This is needed for buggy hardware (uc101) where
+ no pull down resistor is connected to the signal IDE5V_DD7.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 7f625fc6d3ba8f890e843ac01717804c2462ed53
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Sep 23 07:56:04 2009 +0200
+
+ mpc5200, mucmc52, uc101: config cleanup
+
+ - As these boards are similiar, collect common config options
+ in manroland/common.h and manroland/mpc52xx-common.h
+ for mpc5200 specific common options for this manufacturer.
+ - add OF support
+ - update default environment
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+ Minor edit of commit message.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9d142ea8f787882ab732fa531a34db091bfa363d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Sep 25 00:57:49 2009 +0200
+
+ Fix "ppc/85xx: Clean up use of LAWAR defines" breakage
+
+ Commit 002741ae86 modified include/asm-ppc/mmu.h such that the LAWAR_
+ defines were only enabled for the 83xx platform, but they are also
+ needed on MPC512x system. Enabling these for E300 systems seems thus
+ more appropriate.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a5aa3998ab6408a6ac738a3ce8005e647b9465f8
+Author: Martha M Stan <mmarx@silicontkx.com>
+Date: Mon Sep 21 14:08:00 2009 -0400
+
+ Add Elpida Memory Configuration to mpc5121ads Boards
+
+ Signed-off-by: Martha M Stan <mmarx@silicontkx.com>
+
+ Minor coding style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 054197ba8ee5ef1e41694df58531b6e53ec43f2d
+Author: Martha M Stan <mmarx@silicontkx.com>
+Date: Mon Sep 21 14:07:14 2009 -0400
+
+ mpc512x: Streamlined fixed_sdram() init sequence.
+
+ Signed-off-by: Martha M Stan <mmarx@silicontkx.com>
+
+ Minor cleanup:
+
+ Re-ordered default_mddrc_config[] to have matching indices.
+
+ This allows to use the same index "N" for source and target fields;
+ before, we had code like this
+
+ out_be32(&im->mddrc.ddr_time_config2, mddrc_config[3]);
+
+ which always looked like a copy & paste error because 2 != 3.
+
+ Also, use NULL when meaning a null pointer.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 39aaca1f66a0e5b1204b0789f6c0097938c00ad1
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Mar 19 02:46:19 2009 -0500
+
+ ppc/p4080: Determine various chip frequencies on CoreNet platforms
+
+ The means to determine the core, bus, and DDR frequencies are completely
+ new on CoreNet style platforms. Additionally on p4080 we can have
+ different frequencies for FMAN and PME IP blocks. We need to keep track
+ of the FMAN & PME frequencies since they are used for time stamping
+ capabilities inside each block.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3c2a67eec8a0facc865b400caca52e7f6b7adf01
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Sep 17 01:52:37 2009 -0500
+
+ ppc/p4080: Handle timebase enabling and frequency reporting
+
+ On CoreNet style platforms the timebase frequency is the bus frequency
+ defined by 16 (on PQ3 it is divide by 8). Also on the CoreNet platforms
+ the core not longer controls the enabling of the timebase. We now need
+ to enable the boot core's timebase via CCSR register writes.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 7e4259bba4c56536760e42d32dacfb3233f216fd
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Mar 19 02:39:17 2009 -0500
+
+ ppc/p4080: Add various p4080 related defines (and p4040)
+
+ There are various locations that we have chip specific info:
+
+ * Makefile for which ddr code to build
+ * Added p4080 & p4040 to cpu_type_list and SVR list
+ * Added number of LAWs for p4080
+ * Set CONFIG_MAX_CPUS to 8 for p4080
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 39a7e7fd538cdf49e7e8a2f0634ea5e15e12b4ec
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Sep 17 01:44:39 2009 -0500
+
+ ppc/p4080: CoreNet platfrom style secondary core release
+
+ The CoreNet platform style of bringing secondary cores out of reset is
+ a bit different that the PQ3 style. Mostly the registers that we use
+ to setup boot translation, enable time bases, and boot release the cores
+ have moved around.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a880cf3e0e1c220d780eccd0b101170c4499485d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Sep 17 01:44:00 2009 -0500
+
+ ppc/p4080: CoreNet platfrom style CCSRBAR setting
+
+ On CoreNet based platforms the CCSRBAR address is split between an high &
+ low register and we no longer shift the address.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 418ec8584343f04048e2cc7ee96b6b29be54ad97
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Mar 19 02:32:23 2009 -0500
+
+ ppc/p4080: Add support for CoreNet style platform LAWs
+
+ On CoreNet based platforms the LAW address is split between an high &
+ low register and we no longer shift the address. Also, the target IDs
+ on CoreNet platforms have been completely re-assigned.
+
+ Additionally, added a new find_law() API to which LAW an address hits in.
+ This is need for the CoreNet style boot release code since it will need
+ to determine what the target ID should be set to for boot window
+ translation.
+
+ Finally, enamed LAWAR_EN to LAW_EN and moved to header so we can use
+ it elsewhere.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 01df521217957d77d53c2d570183eded7030938f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Sep 16 09:43:12 2009 -0500
+
+ ppc/p4080: Add p4080 platform immap definitions
+
+ The p4080 SoC has a significant amount of commonality with the 85xx/PQ3
+ platform. We reuse the 85xx immap and just add new definitions for
+ local access and global utils. The global utils is now broken into
+ global utils, clocking and run control/power management.
+
+ The offsets from CCSR for a number of blocks have also changed. We
+ introduce the CONFIG_FSL_CORENET define to distinquish the PQ3 style of
+ platform from the new p4080 platform. We don't use QoirQ as there are
+ products (like p2020) that are PQ3 based platforms but have the QoirQ
+ name.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 25bacf7a2b096496e2c58f2de4e5b2bce8fba038
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Sep 22 15:45:44 2009 -0500
+
+ ppc/85xx: Fix enabling of L2 cache
+
+ We need to flash invalidate the locks in addition to the cache
+ before we enable.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit cb0ff65c619efacdc0ba69aa8ee6ede7dd364a38
+Author: Vivek Mahajan <vivek.mahajan@freescale.com>
+Date: Tue Sep 22 12:48:27 2009 +0530
+
+ 85xx-fdt: Fixed l2-ctlr's compatible prop for QorIQ
+
+ The code assumed names where just numbers and always prefixed 'mpc'.
+ However newer QorIQ don't follow the mpc naming scheme.
+
+ Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 234a89d911ce28e46372f555d7c14e28424f2b0d
+Author: Mingkai Hu <Mingkai.hu@freescale.com>
+Date: Tue Sep 22 14:53:21 2009 +0800
+
+ ppc/85xx: add cpu init config file for boot from NAND
+
+ When boot from NAND, the NAND flash must be connected to br/or0.
+ Also init RAM(L2 SRAM or DDR SDRAM) for load the second image to
+ it.
+
+ Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 266139b88b43ae1d87abb5f5431e6f57b801795f
+Author: Mingkai Hu <Mingkai.hu@freescale.com>
+Date: Tue Sep 22 14:53:34 2009 +0800
+
+ immap_85xx: add porpllsr's plat ratio definition
+
+ Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 098bcbae3172d73d24ca8ba196328d901eed4132
+Author: Mingkai Hu <Mingkai.hu@freescale.com>
+Date: Tue Sep 22 14:53:10 2009 +0800
+
+ ppc/85xx: add ld script file for boot from NAND
+
+ The first stage 4K image uses a seperate ld script file to
+ generate 4K image. This patch moves it to the cpu/mpc85xx/*
+ to make it avaliable for 85xx platform.
+
+ Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8439f05cfd8cbb38485376a34d9fe297ba262737
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Sep 21 23:09:28 2009 -0500
+
+ mpc8610hpcd: Use common 86xx fdt fixup code
+
+ Using the common 86xx fdt fixups removes some board-specific code and
+ should make the mpc8610hpcd easier to maintain in the long run.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 928435d11b898870415910efff87a4d6399cecb8
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Mon Sep 21 17:19:17 2009 -0400
+
+ sbc85x0: tidy up Makefile to use new configuration script.
+
+ Commit 804d83a5 allows us to move all the configuration
+ variation tweaks out of the top level Makefile and down
+ into the boards config header. This takes advantage of
+ that for the sbc8540/sbc8560 boards.
+
+ There were a couple of cheezy comments pointing at incorrect
+ files, or files that don't exist, so I've cleaned those up too.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2738bc8df65ec905094d83f62f87fed123a03b9c
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Sun Sep 20 20:36:06 2009 -0400
+
+ sbc8548: allow enabling PCI via a make config option
+
+ Prior to this commit, to enable PCI, you had to go manually
+ edit the board config header, and if you had 33MHz PCI, you
+ had to manually change CONFIG_SYS_NS16550_CLK too, which was
+ not real user friendly,
+
+ This adds the typical PCI and clock speed make targets to the
+ toplevel Makefile in accordance with what is being done with
+ other boards (i.e. using the "-t" to mkconfig).
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit fdc7eb90b504daa020f290604d50da8f7cb70d8a
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Sun Sep 20 20:36:05 2009 -0400
+
+ sbc8548: update PCI/PCI-e support code
+
+ The PCI/PCI-e support for the sbc8548 was based on an earlier
+ version of what the MPC8548CDS board was using, and in its
+ current state it won't even compile. This re-syncs it to match
+ the latest codebase and makes use of the new shared PCI functions
+ to reduce board duplication.
+
+ It borrows from the MPC8568MDS, in that it pulls the PCI-e I/O
+ back to 0xe280_0000 (where PCI2 would be on MPC8548CDS), and
+ similarly it coalesces the PCI and PCI-e mem into one single TLB.
+
+ Both PCI-x and PCI-e have been tested with intel e1000 cards
+ under linux (with an accompanying dts change in place)
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a8b3e90f798e0cca5f11c912f9d0823a1c5b6c24
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Sun Sep 20 20:36:01 2009 -0400
+
+ fsl_pci: create a SET_STD_PCI_INFO() helper wrapper
+
+ Recycle the recently added PCI-e wrapper used to reduce board
+ duplication of code by creating a similar version for plain PCI.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 11d5a629f8a40f9d7cffc74e58f4e3ed258e56ab
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Sun Sep 20 20:36:04 2009 -0400
+
+ sbc8548: correct local bus SDRAM size from 64M to 128M
+
+ The size of the LB SDRAM on this board is 128MB, spanning CS3
+ and CS4. It was previously only being configured for 64MB on
+ CS3, since that was what the original codebase of the MPC8548CDS
+ had. In addition to setting up BR4/OR4, this also adds the TLB
+ entry for the second half of the SDRAM.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0c7e4d45d9fb3c9e503ee93d50572d346dae150e
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Sun Sep 20 20:36:03 2009 -0400
+
+ sbc8548: use I/O accessors
+
+ Sweep throught the board specific file and replace the various
+ register proddings with the equivalent I/O accessors.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit fc38eb98ff226f2c53eecbee033a6ab7619473dc
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Sun Sep 20 20:36:02 2009 -0400
+
+ sbc8548: remove eTSEC3/4 voltage hack
+
+ With only eTSEC1 and 2 being brought out to RJ-45 connectors, we
+ aren't interested in the eTSEC3/4 voltage hack on this board
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9b3ba24f18900633a394416cc056c44a1a6eb754
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Fri Sep 18 19:08:41 2009 -0400
+
+ sbc8548: enable access to second bank of flash
+
+ The sbc8548 has a 64MB SODIMM flash module off of CS6 that
+ previously wasn't enumerated by u-boot. There were already
+ BR6/OR6 settings for it [used by cpu_init_f()] but there
+ was no TLB entry and it wasn't in the list of flash banks
+ reported to u-boot.
+
+ The location of the 64MB flash is "pulled back" 8MB from
+ a 64MB boundary, in order to allow address space for the
+ 8MB boot flash that is at the end of 32 bit address space.
+ This means creating two 4MB TLB entries for the 8MB chunk,
+ and then expanding the original boot flash entry to 64MB
+ in order to cover the 8MB boot flash and the remainder
+ (56MB) of the user flash.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ded58f4153923dfff16d2f96495bd7acf1f7e10e
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Wed Sep 23 17:30:57 2009 -0400
+
+ sbc8548: cosmetic line re-wrap
+
+ Fix the extra long lines to be consistent with u-boot coding style.
+ No functional change here.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+
+commit 2c40acd3525b75db3fcd3f5a5bd40445679b5547
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Fri Sep 18 19:08:40 2009 -0400
+
+ sbc8548: get_clock_freq is not valid for this board
+
+ The get_clock_freq() comes from freescale/common/cadmus.c and is
+ only valid for the CDS based 85xx reference platforms. It would
+ be nice if we could read the 33 vs. 66MHz status somehow, but in
+ the meantime, tie it to CONFIG_SYS_CLK_FREQ like all the other
+ non-CDS boards do.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 7b1f1399e876587e0a268a5a471dd444bfbc3114
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Fri Sep 18 19:08:39 2009 -0400
+
+ sbc8548: delete unused MPC8548CDS info carried over from port
+
+ There are a couple defines and PCI bridge quirks related to the PCI
+ backplane of the MPC8548CDS that have no meaning in the context of
+ the port to the sbc8548 board, so delete them.
+
+ Also, the form factor of the sbc8548 is a standalone board with a
+ single PCI-X and a single PCI-e slot. That pretty much guarantees
+ that it will never be a PCI agent itself, so the host/agent and root
+ complex/end node distinctions have been removed.
+
+ Similarly, since there is no physical connector mapping to PCI2, so
+ all references of PCI2 in the board support files have been removed
+ as well.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 94ca091456d5c3040ddd6351c80cf3e74393f9be
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Fri Sep 18 19:08:44 2009 -0400
+
+ sbc8548: enable use of PCI network cards
+
+ Create a board_eth_init to allow a place to hook in
+ the PCI ethernet init after all the eTSEC are up
+ and configured.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 82b7725b6d46d9ad2b962b4cdfa896bd5ee32fb5
+Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+Date: Sat Sep 19 17:50:17 2009 +0530
+
+ ppc/85xx: 32bit DDR changes for P1020/P1011
+
+ The P1020/P1011 SOCs support max 32bit DDR width as opposed to P2020/P2010
+ where max DDR data width supported is 64bit.
+
+ As a next step the DDR data width initialization would be made more dynamic
+ with more flexibility from the board perspective and user choice.
+ Going forward we would also remove the hardcodings for platforms with onboard
+ memories and try to use the FSL SPD code for DDR initialization.
+
+ Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit bd42bbb858dde713f023fc2e4f512ec174a1a8d2
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Fri Sep 18 19:08:46 2009 -0400
+
+ sbc8548: replace README with completely new document
+
+ The previous README.sbc8548 was pretty much content-free. Replace
+ it with something that actually gives the end user some relevant
+ hardware details, and also lists the u-boot configuration choices.
+
+ Also in the cosmetic department, fix the bogus line in the Makefile
+ that was carried over from the SBC8560 Makefile, and the typo in
+ the sbc8548.c copyright.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 002741ae862c1c7e3dad89d020e392e6add1c05d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Sat Sep 19 11:20:54 2009 -0500
+
+ ppc/85xx: Clean up use of LAWAR defines
+
+ On 85xx platforms we shouldn't be using any LAWAR_* defines
+ but using the LAW_* ones provided by fsl-law.h. Rename any such
+ uses and limit the LAWAR_ to the 83xx platform as the only user so
+ we will get compile errors in the future.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f61dae7c9dc526410faec15ce352b11fc36a560b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Sep 3 10:20:09 2009 -0500
+
+ ppc/85xx: Clean up mpc8572DS PCI setup code
+
+ Use new fsl_pci_init_port() that reduces amount of duplicated code in the
+ board ports, use IO accessors and clean up printing of status info.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 4958af8735207640181c4423e41b24ee7418361a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Sep 3 09:42:01 2009 -0500
+
+ ppc/85xx: Clean up p2020ds PCI setup code
+
+ Use new fsl_pci_init_port() that reduces amount of duplicated code in the
+ board ports, use IO accessors and clean up printing of status info.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 93a83872c707891bad22f7776d79a650c870601f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Sep 3 10:09:04 2009 -0500
+
+ ppc/85xx: Clean up p1_p2_rdb PCI setup
+
+ General code cleanup to use in/out IO accessors as well as making
+ the code that prints out info sane between board and generic fsl pci
+ code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 62ca21c442e18fec118ec83e183d64ea49966ce7
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Sep 10 16:31:53 2009 -0500
+
+ ppc/85xx: Simplify the top makefile for P1_P2_RDB boards
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a0f9e0e0f06033807de0ae017ad4d9cf5ddff84b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Sep 10 16:26:37 2009 -0500
+
+ ppc/85xx: Simplify the top makefile for 36-bit config for P2020DS
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f9edcc10e6cb497dd7dcbaf691cfd1859abae27a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Sep 10 16:23:45 2009 -0500
+
+ ppc/85xx: Simplify the top makefile for 36-bit config for MPC8572DS
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0e905ac28b1e039d74e63232293972bff6b5a0ce
+Author: Mingkai Hu <Mingkai.hu@freescale.com>
+Date: Fri Sep 18 11:45:09 2009 +0800
+
+ ppc/85xx: simplify the top makefile for 36-bit config for mpc8536ds
+
+ Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 202d94875c98b7b573f136c4f353609758ed9733
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Sep 15 22:21:58 2009 -0500
+
+ ppc/85xx: Fix LCRR_CLKDIV defines
+
+ For some reason the CLKDIV field varies between SoC in how it interprets
+ the bit values.
+
+ All 83xx and early (e500v1) PQ3 devices support:
+ clk/2: CLKDIV = 2
+ clk/4: CLKDIV = 4
+ clk/8: CLKDIV = 8
+
+ Newer PQ3 (e500v2) and MPC86xx support:
+ clk/4: CLKDIV = 2
+ clk/8: CLKDIV = 4
+ clk/16: CLKDIV = 8
+
+ Ensure that the MPC86xx and MPC85xx still get the same behavior and make
+ the defines reflect their logical view (not the value of the field).
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 55f786d8ba8ce58a81428536da34a2192b9bad9f
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Sep 21 12:04:33 2009 -0500
+
+ MAKEALL: Use POSIX math
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 40a28f0885e62b6607e12ed6baa6284927f5263e
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Sep 21 12:04:32 2009 -0500
+
+ MAKEALL: Add summary information
+
+ This change adds some basic summary information to the MAKEALL script.
+ The summary information includes how many boards were compiled, how many
+ boards had compile warnings or errors, and which specific boards had
+ compile warnings or errors.
+
+ This information is useful when doing compile testing to quickly
+ determine which boards are broken.
+
+ As a side benefit, no empty $BOARD.ERR files are generated by MAKEALL.
+ Previously, each board had a corresponding $BOARD.ERR file, even if the
+ board compiled cleanly.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 71ce9bd7f551e44c4ddb4c985c095da6d3452d79
+Author: Eric Millbrandt <emillbrandt@coldhaus.com>
+Date: Mon Sep 21 11:05:55 2009 -0500
+
+ galaxy5200: enable version environment variable
+
+ Add version environment variable configuration to the galaxy5200
+ board header file.
+
+ Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
+
+ Edited commit message.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c569ad6e1e8768a0fec513ffc156412240b7eb35
+Author: Werner Pfister <werner.pfister@intercontrol.de>
+Date: Mon Sep 21 14:49:56 2009 +0200
+
+ digsy_mtc: Add TCR register value for RTC (DS1339)
+
+ Signed-off-by: Werner Pfister <werner.pfister@intercontrol.de>
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit b0078c8792badd81aed51b7eabe85e960036361c
+Author: Werner Pfister <werner.pfister@intercontrol.de>
+Date: Mon Sep 21 14:49:55 2009 +0200
+
+ rtc/ds1337.c: Allow to set TCR register
+
+ This is needed to correctly start the charging of an attached capacitor
+ or battery.
+
+ Signed-off-by: Werner Pfister <werner.pfister@intercontrol.de>
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 9d7952e4c636b8c99289a44dbe28c6f93c43b9f7
+Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
+Date: Tue Sep 15 09:53:29 2009 +0200
+
+ ubifs: Add support for looking up directory and relative symlinks
+
+ This patch adds support for resolving symlinks to directories as well as
+ relative symlinks. Symlinks are now always resolved during file lookup,
+ so the load stage no longer needs to special-case them.
+
+ Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit fcdb36b85ac033c09a9762a0a14808f7cb2ed54c
+Author: Rupjyoti Sarmah <rsarmah@amcc.com>
+Date: Mon Sep 21 11:26:19 2009 -0700
+
+ ppc4xx: Fix PCIE PLL lock on 440SPe Yucca board
+
+ u-boot reports a PCIE PLL lock error at boot time on Yucca board, and
+ left PCIe nonfunctional. This is fixed by making u-boot function
+ ppc4xx_init_pcie() to wait 300 uS after negating reset before the
+ first check of the PLL lock.
+
+ Signed-off-by: Rupjyoti Sarmah <rsarmah@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 91d599044caac4a8c228115b16cf3b073f902080
+Author: Dirk Eibach <eibach@gdsys.de>
+Date: Mon Sep 21 13:27:14 2009 +0200
+
+ ppc4xx: Make DDR2 timing for intip more robust
+
+ DDR2 timing for intip was on the edge for some of the available chips
+ for this board. Now it is verfied to work with all of them.
+
+ Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 184a3a27f5cd2c64666f74df94c86b94c4383ef8
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 15 00:26:02 2009 +0200
+
+ board/linkstation/ide.c: Fix compile warning
+
+ Fix warning: ide.c:60: warning: dereferencing type-punned pointer will
+ break strict-aliasing rules
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Guennadi Liakhovetski <lg@denx.de>
+
+commit 004eca0c9ba328de457d5dc9ef8805639dfef893
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Sep 16 22:03:08 2009 -0500
+
+ ppc: Clean up calling of phy_reset() during init
+
+ Remove board-specific #ifdefs for calling phy_reset() during
+ initializtion
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 3a8f28d0a6d9f8505017680233064c13e4587174
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Sep 16 22:03:07 2009 -0500
+
+ ppc: Clean up calling of misc_init_r() during init
+
+ Remove board-specific #ifdefs for calling misc_init_r() during
+ initializtion
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Acked-by: Heiko Schocher <hs@denx.de>
+
+commit 3202d33169df04da5cf3dea8c5ab0a902b90ecaa
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Sep 16 21:38:10 2009 -0500
+
+ Remove deprecated 'autoscr' command/variables
+
+ The more standard 'source' command provides identical functionality to
+ the autoscr command.
+
+ Environment variable names/values on the MVBC_P, MVBML7, kmeter1,
+ mgcoge, and km8xx boards are updated to no longer refernce 'autoscr'.
+
+ The 'autoscript' and 'autoscript_uname' environment variables are
+ also removed.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Acked-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+ Acked-by: Heiko Schocher <hs@denx.de>
+
+commit d3f4941874a20d8a390a36ba71335ae1db2f9ba0
+Author: Paul Gibson <paul.gibson2074@gmail.com>
+Date: Wed Sep 16 10:05:00 2009 +1000
+
+ mpc512x. Micron nand flash needs a reset before a read command is issued.
+
+ Micron nand flash needs a reset before a read command is issued.
+ The current mpc5121_nfc driver ignores the reset command.
+
+commit b55ae40249545eabb9d6bfb850b1400a32561b1f
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Wed Sep 9 21:18:41 2009 +0200
+
+ FDT: remove obsolete OF_CPU and OF_SOC macros.
+
+ Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com>
+ Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ Acked-by: Heiko Schocher <hs@denx.de>
+
+commit 3b6a9267f0de7b85d387fa4123d0b58379363447
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 15 00:09:21 2009 +0200
+
+ board/flagadm/flash.c: fix compile warning
+
+ Fix warning: flash.c:531: warning: dereferencing type-punned pointer
+ will break strict-aliasing rules
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Kári DavÃðsson <kd@flaga.is>
+
+commit 0413cfecea350000eab5e591a0965c3e3ee0ff00
+Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
+Date: Thu Sep 17 15:15:52 2009 +0200
+
+ Correct ffs/fls regression for PowerPC etc
+
+ Commits
+
+ 02f99901ed1c9d828e3ea117f94ce2264bf8389e
+ 52d61227b66d4099b39c8309ab37cb67ee09a405
+
+ introduced a regression where platform-specific ffs/fls implementations
+ were defined away. This patch corrects that by using PLATFORM_xxx
+ instead of the name itself.
+
+ Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit e67af44d0167d8237dd2c2ddf8e301d19ca12914
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Sep 14 11:13:34 2009 +0200
+
+ ppc4xx: Consolidate get_OPB_freq()
+
+ All 4xx variants had their own, mostly identical get_OPB_freq()
+ function. Some variants even only had the OPB frequency calculated
+ in this routine and not supplied the sys_info.freqOPB variable
+ correctly (e.g. 405EZ). This resulted in incorrect OPB values passed
+ via the FDT to Linux.
+
+ This patch now removes all those copies and only uses one function
+ for all 4xx variants (except for IOP480 which doesn't have an OPB).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 84a45d33c2cc261dbd5411f7c2ad45f6003025b6
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Sep 11 17:09:45 2009 +0200
+
+ ppc4xx: Enable commands for FDT enabled Linux booting on AMCC Acadia
+
+ Acadia still used the "old" arch/ppc bootm commands for booting
+ Linux images without FDT. This patch now enables these fdt-aware
+ boot commands for Acadia as well.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 95a4a593b577b6e2f1da2d4b0f5ec86975c33413
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Sep 11 17:07:55 2009 +0200
+
+ ppc4xx: Fix 405EZ uart base baud calculation
+
+ With this fix, Linux correctly configures the baudrate when booting
+ with FDT passed from U-Boot to Linux.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 15fba3279b56333bdb65ead366f82c945ed320d1
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Sep 11 15:28:41 2009 -0500
+
+ ppc/85xx: Disable all async interrupt sources when we boot
+
+ We should make sure to clear MSR[ME, CE, DE] when we boot an OS image
+ since we have changed the exception vectors and the OSes vectors might
+ not be setup we should avoid async interrupts at all costs.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9f00409a9d04cf533305531da32437130802f3a3
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Sep 11 13:52:45 2009 -0500
+
+ ppc/85xx: Split out cpu_init_early into its own file for NAND_SPL
+
+ By pulling out cpu_init_early we can build just it and not all of
+ cpu_init for NAND_SPL.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0456dbf3475d0aec42873a967ac97ed81f376119
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Sep 11 13:41:49 2009 -0500
+
+ ppc/85xx: Change cpu_init_early_f so we can use with NAND SPL
+
+ Use write_tlb and don't use memset so we can use the same code for
+ cpu_init_early_f between NAND SPL and not.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6e1385d5f8d137e741dfef02465d7dc328040ad7
+Author: Mingkai Hu <Mingkai.hu@freescale.com>
+Date: Fri Sep 11 10:53:08 2009 +0800
+
+ NAND boot: change NAND loader's relocate SP to CONFIG param
+
+ So that we can set the NAND loader's relocate stack pointer
+ to the value other than the relocate address + 0x10000.
+
+ Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+ Acked-by: Scott Wood <scottwood@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 7da53351d817c6d77364cfde922891f37d0e5ed8
+Author: Mingkai Hu <Mingkai.hu@freescale.com>
+Date: Fri Sep 11 14:19:10 2009 +0800
+
+ ppc/85xx: add boot from NAND/eSDHC/eSPI support
+
+ The MPC8536E is capable of booting form NAND/eSDHC/eSPI, this patch
+ implements these three bootup methods in a unified way - all of these
+ use the general cpu/mpc85xx/start.S, and load the main image to L2SRAM
+ which lets us use the SPD to initialize the SDRAM.
+
+ For all three bootup methods, the bootup process can be divided into two
+ stages: the first stage will initialize the corresponding controller,
+ configure the L2SRAM, then copy the second stage image to L2SRAM and
+ jump to it. The second stage image is just like the general U-Boot image
+ to configure all the hardware and boot up to U-Boot command line.
+
+ When boot from NAND, the eLBC controller will first load the first stage
+ image to internal 4K RAM buffer because it's also stored on the NAND
+ flash. The first stage image, also call 4K NAND loader, will initialize
+ the L2SRAM, load the second stage image to L2SRAM and jump to it. The 4K
+ NAND loader's code comes from the corresponding nand_spl directory, along
+ with the code twisted by CONFIG_NAND_SPL.
+
+ When boot from eSDHC/eSPI, there's no such a first stage image because
+ the CPU ROM code does the same work. It will initialize the L2SRAM
+ according to the config addr/word pairs on the fixed address and
+ initialize the eSDHC/eSPI controller, then load the second stage image
+ to L2SRAM and jump to it.
+
+ The macro CONFIG_SYS_RAMBOOT is used to control the code to produce the
+ second stage image for all different bootup methods. It's set in the
+ board config file when one of the bootup methods above is selected.
+
+ Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit b2eec281a811bb52941f61203d8fe35256b3582c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Sep 11 12:32:01 2009 -0500
+
+ ppc/85xx: Move code around to prep for NAND_SPL
+
+ If we move some of the functions in tlb.c around we need less
+ ifdefs. The first stage loader just needs invalidate_tlb and
+ init_tlbs.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 206af3527c05e520e28d38a48a1d15433e34675d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Sep 11 11:30:30 2009 -0500
+
+ ppc/85xx: Repack tlb_table to save space
+
+ We can pack the initial tlb_table in MAS register format and use
+ write_tlb to set things up. This savings can be helpful for NAND
+ style first stage boot loaders.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d30f9043539d372cf66406bc2f21bb8c20e67009
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Sep 11 11:27:00 2009 -0500
+
+ ppc/85xx: Introduce low level write_tlb function
+
+ Factor out the code we use to actually write a tlb entry.
+
+ set_tlb is a logical view of the TLB while write_tlb is a low level
+ matching the MAS registers.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0ead6f2ed7cf4e1f70dab5b529ad121e38359485
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date: Thu Sep 10 14:44:48 2009 +0800
+
+ ppc/85xx: Enable usb ehci support for p2020ds board
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6d8565a1ed5acb01bad4a4cd74a93be5f7fb7f7c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Sep 10 14:54:55 2009 -0500
+
+ ppc/8xxx: Misc DDR related fixes
+
+ * Fix setting of ESDMODE (MR1) register - the bit shifting was wrong
+ * Fix the format string to match size in a debug print
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3e3c9c157b89eab2dc2f897899b1b95cd70c1a58
+Author: Scott Wood <scottwood@freescale.com>
+Date: Thu Aug 20 17:45:00 2009 -0500
+
+ ppc/85xx: Remove some bogus code from external interrupt handler.
+
+ Skipping the interrupted instruction will accomplish nothing other
+ than turning a spurious interrupt into a crash.
+
+ External interrupts are not machine checks, so don't count them as such.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit dcc87dd58db466caa2d66755c5ec9455edf42fe8
+Author: Scott Wood <scottwood@freescale.com>
+Date: Thu Aug 20 17:45:05 2009 -0500
+
+ ppc/85xx: Ensure that MAS8 is zero when writing TLB entries.
+
+ Its reset value is random, and we sometimes read uninitialized TLB
+ arrays. Make sure that we don't retain MAS8 from reading such an entry
+ if the VF bit in MAS8 is set, attempts to use the mapping will trap.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 1b72dbecca2d7ad7a21c92d80227daa2d8ec5a57
+Author: Scott Wood <scottwood@freescale.com>
+Date: Thu Aug 20 17:44:20 2009 -0500
+
+ ppc/85xx: Don't enable interrupts before we're ready
+
+ We cannot handle any exceptions while running in AS1, as the exceptions
+ will transition back to AS0 without a valid mapping.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 3ca55bce9c8bf00df06a20487fafc16fa2f8084b
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Fri Sep 11 07:50:33 2009 -0400
+
+ mpc8260: remove Ethernet node fixup to use generic FDT code.
+
+ Remove Ethernet node fixup from mgcoge and muas3001 boards and modify its
+ configs for the common mpc8260 code to use generic Ethernet fixup.
+
+ Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com>
+ Tested-by: Heiko Schocher <hs@denx.de>
+
+commit 1c20e4a9fbc531e2149ae061e8583f5fad82f163
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Sep 9 12:20:21 2009 -0400
+
+ tools/netconsole: use ncb automatically if available
+
+ The standard netcat, while ubiquitous, doesn't handle broadcast udp packets
+ properly. The local ncb util does however. So if ncb can be located in
+ the standard locations, automatically use that instead.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 770931805d292908a57a3d2c5f9a4fcde888b5a2
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Sep 9 12:20:20 2009 -0400
+
+ tools/netconsole: make a bit more robust
+
+ The netcat utility likes to exit when it receives an empty packet (as it
+ thinks this means EOF). This can easily occur when working with command
+ line editing as this behavior will be triggered when using backspace. Or
+ with tabs and command line completion. So create two netcat processes -
+ one to only listen (and put it into a loop), and one to do the sending.
+ Once the user quits the transmitting netcat, the listening one will be
+ killed automatically.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit a6e19d69f63c14b7672c65ca4b014621c6fd0201
+Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
+Date: Mon Aug 24 09:10:16 2009 +0200
+
+ arm: Define test_and_set_bit and test_and_clear bit for ARM
+
+ Needed for (e.g.) ubifs support to work.
+
+ Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+
+commit 52d61227b66d4099b39c8309ab37cb67ee09a405
+Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
+Date: Mon Aug 24 09:10:12 2009 +0200
+
+ Define ffs/fls for all architectures
+
+ UBIFS requires fls(), which is not defined for arm (and some other
+ architectures) and this patch adds it. The implementation is taken from
+ Linux and is generic. ffs() is also defined for those that miss it.
+
+ Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+
+commit 4b15de08fe4d2c9d12a3764394731018a763216b
+Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
+Date: Mon Aug 24 09:10:03 2009 +0200
+
+ arm: Make arm bitops endianness-independent
+
+ Bring over the bitop implementations from the Linux
+ include/asm-generic/bitops/non-atomic.h to provide
+ endianness-independence.
+
+ Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+
+commit 02f99901ed1c9d828e3ea117f94ce2264bf8389e
+Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
+Date: Mon Aug 24 09:09:50 2009 +0200
+
+ Move __set/clear_bit from ubifs.h to bitops.h
+
+ __set_bit and __clear_bit are defined in ubifs.h as well as in
+ asm/include/bitops.h for some architectures. This patch moves
+ the generic implementation to include/linux/bitops.h and uses
+ that unless it's defined by the architecture.
+
+ Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+
+commit 557555fe0b82940ba7cc69f81d31d6ef4d4933b4
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Sep 4 19:54:45 2009 -0400
+
+ standalone: convert to kbuild style
+
+ Clean up the arch/cpu/board/config checks as well as redundant setting of
+ srec/bin variables by using the kbuild VAR-$(...) style.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 804d83a563c47b55e1f14f5de3b6e9d7e2a7ef5e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 15 22:12:31 2009 +0200
+
+ mkconfig: split the board make target to multiple config targets
+
+ To simplify the top level makefile it useful to be able to parse
+ the top level makefile target to multiple individual target, then
+ put them to the config.h, leave the board config file to handle
+ the different targets.
+
+ Note that this method uses the '_'(underline) as the delimiter when
+ splits the board make target.
+
+ Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
+
+ This also reverts commit 511c02f611cb5afa1b8ca5980caaaabaa0de377f.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit ceb2d57c2205db5bbd868577f756c74a2568160c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 15 21:13:27 2009 +0200
+
+ kwbimage.c: Fix compile warning when building on 64 bit systems (again)
+
+ Commit 51003b89 attempted to fix a build problem on 64 bit systems,
+ but just turned it into a build problem on 32 bit systems (silly me).
+
+ Now do the Right Thing (TM) and use a "%zu" printf format.
+
+ Also fix spelling error.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6c7bc91fb3dba186d3398a1653f6db236510ffa7
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Sep 11 11:30:34 2009 +0200
+
+ board/amcc/common/flash.c: Fix compile warning
+
+ Fix warning: ../common/flash.c:917: warning: dereferencing type-punned
+ pointer will break strict-aliasing rules
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Stefan Roese <sr@denx.de>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 70fb809c563c340538264d2a9436135e74c38bfe
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Sep 11 11:47:07 2009 +0200
+
+ board/amcc/yucca/flash.c: Fix compile warning
+
+ Fix warning: flash.c:919: warning: dereferencing type-punned pointer
+ will break strict-aliasing rules
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Stefan Roese <sr@denx.de>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 030ec52f8cc83015f968db30208f4bd07feffa6c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Sep 11 11:44:39 2009 +0200
+
+ board/amcc/taihu/flash.c: Fix compile warning
+
+ Fix warnings:
+ flash.c: In function 'write_word_1':
+ flash.c:696: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ flash.c: In function 'write_word_2':
+ flash.c:1044: warning: dereferencing type-punned pointer will break strict-aliasing rules
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Stefan Roese <sr@denx.de>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 0fd3d902d920f3e60f88530c33f1ae7581260951
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Sep 11 11:37:20 2009 +0200
+
+ board/etin/debris/phantom.c: Fix compile error
+
+ Fix build problem caused by commit e84aba13: "Replace BCD2BIN and
+ BIN2BCD macros with inline functions"
+
+ phantom.c:163: error: redefinition of 'bcd2bin'
+ /home/wd/git/u-boot/work/include/bcd.h:16: error: previous definition of 'bcd2bin' was here
+ phantom.c:168: error: redefinition of 'bin2bcd'
+ /home/wd/git/u-boot/work/include/bcd.h:21: error: previous definition of 'bin2bcd' was here
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Sangmoon Kim <dogoil@etinsys.com>
+
+commit 5168801f4b71c2f8dcd92a80cfcfda84246e67fe
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Sep 11 11:28:21 2009 +0200
+
+ board/dave/common/flash.c: fix compile warning
+
+ Fix warning: ../common/flash.c:668: warning: dereferencing type-punned
+ pointer will break strict-aliasing rules
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Andrea Marson <andrea.marson@dave-tech.it>
+
+commit 97138fc48091f2b063c4e32f36d05854b9d113fb
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Sep 11 11:15:31 2009 +0200
+
+ board/esd/cpci750/ide.c: fix compile warning
+
+ Fix warning: ide.c:54: warning: dereferencing type-punned pointer will
+ break strict-aliasing rules
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Cc: Stefan Roese <sr@denx.de>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit ba73060cf4163bd5eb1711020126e2f7f62d363e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Sep 11 10:13:26 2009 +0200
+
+ board/esd/common/flash.c: Fix compile warning
+
+ Fix warning: ../common/flash.c:635: warning: dereferencing type-punned
+ pointer will break strict-aliasing rules
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Cc: Stefan Roese <sr@denx.de>
+ Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 2d6d9f0848e952ea33c658dfba335685a2725b8b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Sep 11 09:36:31 2009 +0200
+
+ sk98lin: fix compile warnings
+
+ Fix warnings:
+ skge.c: In function 'BoardInitMem':
+ skge.c:1389: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ skge.c:1390: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ skge.c:1391: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ skgesirq.c: In function 'SkGePortCheckUpXmac':
+ skgesirq.c:1301: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ skgesirq.c:1301: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ skgesirq.c:1398: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ skgesirq.c:1398: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ skrlmt.c: In function 'SkRlmtInit':
+ skrlmt.c:661: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ skxmac2.c: In function 'SkMacPromiscMode':
+ skxmac2.c:753: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ skxmac2.c:753: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ skxmac2.c: In function 'SkMacHashing':
+ skxmac2.c:803: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ skxmac2.c:803: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ skxmac2.c: In function 'SkMacFlushTxFifo':
+ skxmac2.c:1115: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ skxmac2.c:1115: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ skxmac2.c: In function 'SkMacFlushRxFifo':
+ skxmac2.c:1145: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ skxmac2.c:1145: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ skxmac2.c: In function 'SkXmInitPauseMd':
+ skxmac2.c:1987: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ skxmac2.c:1987: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ skxmac2.c: In function 'SkXmOverflowStatus':
+ skxmac2.c:4236: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ skxmac2.c:4236: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ skxmac2.c:4242: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ skxmac2.c:4242: warning: dereferencing type-punned pointer will break strict-aliasing rules
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3708e4cdb1f1d3d5128cf87be040d7e6b85f60dd
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Sep 11 09:13:58 2009 +0200
+
+ drivers/net/natsemi.c: fix compile warning
+
+ Fix warning: natsemi.c:757: warning: dereferencing type-punned pointer
+ will break strict-aliasing rules
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Ben Warren <biggerbadderben@gmail.com>
+
+commit 78d19a398778a58d7b40b0c78e026515271b1a84
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Sep 7 09:08:02 2009 +0200
+
+ net: emaclite: Cleanup license to be GPL compatible
+
+ Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 0900bee9ab9818439b2d1298fa8909a88f74ec0d
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Aug 14 13:41:17 2009 +0200
+
+ microblaze: Enable hush parser
+
+ With Hush parser is possible to change command line in dtb
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 13916abf996b127b681ddc26664c236ded28ba7f
+Author: Michal Simek <monstr@monstr.eu>
+Date: Thu Aug 20 22:44:02 2009 +0200
+
+ microblaze: Remove AtmarkTechno Suzaku board
+
+ Users should use microblaze-generic platform.
+ This platform is longer not supported.
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 3ceba1d45d007144d10368f91ff9e36f3b5f39a1
+Author: Michal Simek <monstr@monstr.eu>
+Date: Thu Aug 20 22:36:20 2009 +0200
+
+ net: Remove old Xilinx Emac driver
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 2fddd44464d02e0f3ade06dabe0e165835fa61f0
+Author: Michal Simek <monstr@monstr.eu>
+Date: Wed Aug 19 08:10:08 2009 +0200
+
+ microblaze: Short size of global data and fix malloc size
+
+ If is full malloc area global, data are rewrite because
+ there was bad size of malloc area.
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit aedb4683097d3e5de8833f4a9e34664d3d2bd077
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Aug 14 17:02:35 2009 +0200
+
+ microblaze: Add sbss, scommon and COMMON symbols for clearing
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 4c1883670acbf1cc83c04df1876235c3aedde128
+Author: Dirk Eibach <eibach@gdsys.de>
+Date: Wed Sep 9 12:36:07 2009 +0200
+
+ ppc4xx: Rename compactcenter to intip
+
+ Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d1c3b27525b664e8c4db6bb173eed51bfc8220de
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Sep 9 16:25:29 2009 +0200
+
+ ppc4xx: Big cleanup of PPC4xx defines
+
+ This patch cleans up multiple issues of the 4xx register (mostly
+ DCR, SDR, CPR, etc) definitions:
+
+ - Change lower case defines to upper case (plb4_acr -> PLB4_ACR)
+ - Change the defines to better match the names from the
+ user's manuals (e.g. cprpllc -> CPR0_PLLC)
+ - Removal of some unused defines
+
+ Please test this patch intensive on your PPC4xx platform. Even though
+ I tried not to break anything and tested successfully on multiple
+ 4xx AMCC platforms, testing on custom platforms is recommended.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d8d8724be06df43772162dc344ae20dfa814dc72
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Sep 11 09:05:32 2009 +0200
+
+ net/bootp.c: fix compile warning
+
+ Fix warning: bootp.c:695: warning: dereferencing type-punned pointer
+ will break strict-aliasing rules
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Ben Warren <biggerbadderben@gmail.com>
+
+commit 51003b89816848cbe86a8fe48f970ba8b14005f5
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Sep 11 08:58:11 2009 +0200
+
+ kwbimage.c: Fix compile warning when building on 64 bit systems
+
+ Fix this warning when building on 64 bit systems:
+ tools/kwbimage.c: In function 'kwbimage_checksum32':
+ tools/kwbimage.c:135: warning: format '%d' expects type 'int',
+ but argument 4 has type 'long unsigned int'
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Prafulla Wadaskar <prafulla@marvell.com>
+
+commit e7963772eb78a6aa1fa65063d64eab3a8626daac
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Wed Sep 9 21:11:18 2009 +0200
+
+ muas3001: remove BRG clock node fixup to use common mpc8260 code.
+
+ Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com>
+ Acked-by: Heiko Schocher <hs@denx.de>
+
+commit c7c1dbbf7159b38f3302b845dd97d28a543ff91b
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Wed Sep 9 21:09:00 2009 +0200
+
+ r7780mp: fix typo in Ethernet chip model number comment.
+
+ Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com>
+
+commit 45f89f340b4d8aa099fd022260dcb13cf3321b61
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Wed Sep 9 21:22:08 2009 +0200
+
+ ep8248: add support for device tree and secondary Ethernet interface.
+
+ Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com>
+
+commit aa0c7a86cd236b8193218a09e1365c8991bb5ddc
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Mon Sep 7 15:05:02 2009 +0530
+
+ mkimage: Add Kirkwood Boot Image support (kwbimage)
+
+ This patch adds support for "kwbimage" (Kirkwood Boot Image)
+ image types to the mkimage code.
+
+ For details refer to docs/README.kwbimage
+
+ This patch is tested with Sheevaplug board
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Acked-by: Ron Lee <ron@debian.org>
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+commit 7809fbb9aafd60e3a6e5dfe456ae30b93ac61338
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Mon Sep 7 14:59:09 2009 +0530
+
+ Kirkwood: Sheevaplug: Add kwimage configuration file
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+commit b029dddc9ae958b1ccf875649f52c6db396a742d
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Mon Sep 7 14:59:08 2009 +0530
+
+ mkimage: Make table_entry code global
+
+ - make get_table_entry_id() global
+ - make get_table_entry_name() global
+ - move struct table_entry to image.h
+
+ Currently this code is used by image.c only.
+
+ This patch makes this API global so it can be used by other parts of
+ code, too.
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Acked-by: Ron Lee <ron.debian.org>
+
+ Edit comments and commit message.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f666dea8ab215c76c3c2a077ad299f90dd1ace7c
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Mon Sep 7 14:59:07 2009 +0530
+
+ mkimage: Make genimg_print_size() global
+
+ Currently it is used by image.c only, but the the function can be
+ used to support additional mkimage types like for example kwbimage,
+ so make this function globally visible.
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+ Edited commit message.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 37b801888cf73b18f78c1109140ff44e3e37914f
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Mon Sep 7 14:59:06 2009 +0530
+
+ mkimage: Include missing files in build dependency calculations
+
+ Include default_image.o and fit_image.o into the build dependency
+ calculations. This makes sure they get rebuilt if any of the headers
+ they include are modified
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Acked-by: Ron Lee <ron@debian.org>
+
+ Edited commit message.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3a2003f61ee79ac53d20c24cc896c2637a2dfc24
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Aug 19 11:42:56 2009 +0200
+
+ tools/mkimage: fix compiler warnings, use "const"
+
+ This fixes some compiler warnings:
+ tools/default_image.c:141: warning: initialization from incompatible pointer type
+ tools/fit_image.c:202: warning: initialization from incompatible pointer type
+ and changes to code to use "const" attributes in a few places where
+ it's appropriate.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 89a4d6b12fd6394898b8a454cbabeaf1cd59bae5
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Wed Aug 19 17:36:46 2009 +0530
+
+ tools: mkimage: split code into core, default and FIT image specific
+
+ This is a first step towards reorganizing the mkimage code to make it
+ easier to add support for additional images types. Current mkimage
+ code is specific to generating uImage and FIT image files, but the
+ same framework can be used to generate other image types like
+ Kirkwood boot images (kwbimage-TBD). For this, the mkimage code gets
+ reworked:
+
+ Here is the brief plan for the same:-
+ a) Split mkimage code into core and image specific support
+ b) Implement callback functions for image specific code
+ c) Move image type specific code to respective C files
+ Currently there are two types of file generation/list
+ supported (i.e uImage, FIT), the code is abstracted from
+ mkimage.c/.h and put in default_image.c and fit_image.c;
+ all code in these file is static except init function call
+ d) mkimage_register API is added to add new image type support
+ All above is addressed in this patch
+ e) Add kwbimage type support to this new framework (TBD)
+ This will be implemented in a following commit.
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Edit commit message, fix coding style and typos.
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 449609f5b11cce6beba7338bc4ce0f3345376a0b
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Sun Aug 16 05:28:19 2009 +0530
+
+ tools: mkimage: Fixed build warnings
+
+ uninitialized retval variable warning fixed
+ crc32 APIs moved to crc.h (newly added) and build warnings fixed
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 14821d7dea8d7209f2457c3179fa6551c088ba71
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Mon Aug 10 20:44:06 2009 +0530
+
+ tools: mkimage: Makefile sorted
+
+ The tools/Makefile is sorted for all entries,
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+commit f7644c0bf3502529031657a869fa213cda5a2424
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Mon Aug 10 18:49:37 2009 +0530
+
+ tools: mkimage : bugfix returns correct value for list command
+
+ List command always return "EXIT_SUCCESS" even in case of
+ failure by any means.
+
+ This patch return 0 if list command is sucessful,
+ returns negative value reported by check_header functions
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 511c02f611cb5afa1b8ca5980caaaabaa0de377f
+Author: Mingkai Hu <Mingkai.hu@freescale.com>
+Date: Tue Sep 8 15:07:12 2009 +0800
+
+ mkconfig: pass the board name to board config file
+
+ Then we can handle different config targets in the board file, which
+ simplifies the top level Makefile for boards that have multiple
+ config targets.
+
+ Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
+
+commit d640ac58dbf61c769864b3fe76314306b7336cf1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Sep 7 23:52:31 2009 +0200
+
+ Remove "atmel_df_pow2" binary with "make clean"
+
+ Commit 65f6f07b added support for the atmel_df_pow2 standalone program
+ but missed to add a rule to remove it to the "clean" make target.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0b34dbbd0b6969c98c44313b291836d9056ec40a
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Sep 7 10:52:24 2009 +0200
+
+ ppc4xx: Fix compilation warning in 4xx miiphy.c
+
+ This patch fixes the following compilation warning:
+
+ miiphy.c: In function 'emac4xx_miiphy_read':
+ miiphy.c:353: warning: dereferencing type-punned pointer will break
+ strict-aliasing rules
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 82379b5564819e62624a3c58fbc43f1afedf4f5f
+Author: Matthias Fuchs <matthias.fuchs@esd.eu>
+Date: Mon Sep 7 17:00:41 2009 +0200
+
+ ppc4xx: Add CONFIG_PCI_4xx_PTM_OVERWRITE to some esd 4xx boards
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 99bcf14d553f399148a7660b98f7acbd8cc72d80
+Author: Matthias Fuchs <matthias.fuchs@esd.eu>
+Date: Mon Sep 7 17:00:40 2009 +0200
+
+ ppc4xx: Allow overwriting pci target registers for all 4xx boards
+
+ This patch adds the CONFIG_PCI_4xx_PTM_OVERWRITE option and replaces
+ the ugly 'if defined(BOARD1) || ... || defined(BOARDn)' construct
+ in 4xx pci code.
+
+ When CONFIG_PCI_4xx_PTM_OVERWRITE is defined the default ptm register
+ setup can be overwritten through environment variables ptm1la, ptm1ms,
+ ptm2la and ptm2ms to do application specific pci target BAR configuration.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cfab2ae322a99ad55364d054054f138f51130c2a
+Author: Matthias Fuchs <matthias.fuchs@esd.eu>
+Date: Fri Sep 4 10:37:04 2009 +0200
+
+ ppc4xx: Fix PMC405DE support
+
+ This patch fixes PMC405DE support. Patch 85d6bf0b fixed out-of-tree
+ building for this board but the loadpci object did not get linked
+ after that.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c8355b9d9f778bd12ee19c8f34d88e13758a4efd
+Author: Detlev Zundel <dzu@denx.de>
+Date: Wed Sep 2 17:24:57 2009 +0200
+
+ amcc-common.h: Use filenames from environment variables for update procedure.
+
+ Using a separate "u-boot" environment variable allows to easily
+ specify different filenames for the update procedure. This is also in
+ line with many other board configurations defining an "update" script.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+ Acked-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6c97a20d0b2f56cb4f3745d94b1f96986e8cced5
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Sep 9 11:40:41 2009 -0500
+
+ ppc/85xx: Introduce RESET_VECTOR_ADDRESS to handle non-standard link address
+
+ Some board ports place TEXT_BASE at a location that would cause the
+ RESET_VECTOR_ADDRESS not to be at 0xfffffffc when we link. By default
+ we assume RESET_VECTOR_ADDRESS will be 0xfffffffc if the board doesn't
+ explicitly set it.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Wolfgang Denk <wd@denx.de>
+
+commit c348322ac7f76318295cf25ffab2cc2a4900a234
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Sep 8 13:46:46 2009 -0500
+
+ ppc/85xx: Clean up do_reset
+
+ There is no reason to do a run time check for e500 v1 based cores to
+ determine if we have the GUTs RSTCR facility. Only the first generation
+ of PQ3 parts (MPC8540/41/55/60) do not have it. So checking to see if
+ we are e500 v2 would miss future parts (like e500mc).
+
+ Just change this to be ifdef'd based on CONFIG_MPC85{40,41,55,60}.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 21170c80a83f1e60ce7f6f83005e06a5c2d15a8e
+Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+Date: Thu Sep 3 19:42:40 2009 +0530
+
+ ppc/85xx/86xx: Bug fix: call to puts in probecpu() moved to checkcpu().
+
+ While in probecpu() UART is still not initialized.
+
+ Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f8027f6b4789e3340f10620d8fb6113b95b88d9c
+Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+Date: Wed Sep 2 19:40:36 2009 +0530
+
+ ppc/85xx/86xx: Device tree fixup for number of cores
+
+ Fixing the number of cores in the device tree based on the actual number of
+ cores on the system. With this same device tree image can be used for dual
+ core and single core members of otherwise exactly same SOC.
+
+ For example:
+ * P2020RDB and P2010RDB
+ * P1020RDB and P1011RDB
+ * MPC8641D and MPC8641
+
+ Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 58442dc01e47cc8ce42af4f29486a34cad60b9d2
+Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+Date: Wed Sep 2 13:35:21 2009 +0530
+
+ ppc/85xx,86xx: Handling Unknown SOC version
+
+ Incase the system is detected with Unknown SVR, let the system boot
+ with a default value and a proper message.
+
+ Now with dynamic detection of SOC properties from SVR, this is necessary
+ to prevent a crash.
+
+ Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3e7b6c1f2db5ec31f9e7dbc3e0cbca602167a46a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Sep 2 09:03:08 2009 -0500
+
+ ppc/8xxx: Refactor code to determine if PCI is enabled & agent/host
+
+ Refactor the code into a simple bitmask lookup table that determines if
+ a given PCI controller is enabled and if its in host/root-complex or
+ agent/end-point mode.
+
+ Each processor in the PQ3/MPC86xx family specified different encodings
+ for the cfg_host_agt[] and cfg_IO_ports[] boot strapping signals.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 5052a771cf1722c37c732f3c340775b55fbe3a22
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Sep 2 09:00:50 2009 -0500
+
+ ppc/85xx: Cleanup makefile and related optional files
+
+ Cleaned up cpu/mpc85xx/Makefile to use CONFIG_* for those obvious cases
+ we have like PCI, CPM2, QE. Also reworked it to use one line per file
+ for everything and sorted in alphabetical order.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 74c5dfd81f94a2a1f0d6990d17c491d718e8b9ea
+Author: Timur Tabi <timur@freescale.com>
+Date: Fri Sep 4 17:05:24 2009 -0500
+
+ fsl: add register read-back to set_law()
+
+ After programming a new LAW, we should read-back the LAWAR register so that
+ we sync the writes. Otherwise, code that attempts to use the new LAW-mapped
+ memory might fail right away.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c7259086816405fe0eb77f4dc22e76980a040cef
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Sep 3 08:41:31 2009 -0500
+
+ ppc/85xx: Fix bug in setup_mp code
+
+ Its possible that we try and copy the boot page code out of flash into a
+ DDR location that doesn't have a TLB cover it. For example, if we have
+ 3G of DDR we typically only map the first 2G. In the cases of 4G+ this
+ wasn't an issue since the reset page TLB mapping covered the last page
+ of memory which we wanted to copy to.
+
+ We now change the physical address of the reset page TLB to map to the
+ true physical location of the boot page code, copy and than set the
+ TLB back to its 1:1 mapping of the reset page.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c2287af1552bd630956568d3957c370f86801b7d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Sep 3 08:20:24 2009 -0500
+
+ ppc/85xx: Add a simple function to search the TLB
+
+ Allow us to search the TLB array based on an address. This is useful
+ if we want to change an entry but dont know where it happens to be
+ located.
+
+ For example, the boot page mapping we use on MP or the flash TLB that
+ we change the WIMGE settings for after we've relocated.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 26f4cdba6b51deab4ec99d60be381244068ef950
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 14 13:37:54 2009 -0500
+
+ 85xx: Add support for setting IVORs to fixed offset defaults
+
+ In future Book-E implementations IVORs will most likely go away and be
+ replaced with fixed offsets. The IVPR will continue to exist to allow
+ for relocation of the interrupt vectors.
+
+ This code adds support to setup the IVORs as their fixed offset values
+ per the ISA 2.06 spec when we transition from u-boot to another OS
+ either via 'bootm' or a cpu release.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit da1cd955dfec35b0e15381ad1ee248fa194eed82
+Author: Dipen Dudhat <dipen.dudhat@freescale.com>
+Date: Wed Sep 2 11:25:08 2009 +0530
+
+ ppc/85xx: Fix up eSDHC controller clock frequency in the device tree
+
+ Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2abbd31da6d900473ed678ca50789ee58bc9bb00
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Sep 1 22:01:54 2009 -0500
+
+ ppc/8xxx: Remove ddr_pd_cntl register since it doesn't exist
+
+ The ddr_pd_cntl isn't defined in any reference manual and thus we wil
+ remove especially since we set it to 0, which would most likely be its
+ POR value.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 13d46ab2572c0283d34f93bebc9a41295ef84ca5
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Sep 1 21:07:08 2009 -0500
+
+ ppc/8xxx: relocate cpu pointer in global data
+
+ Now that we have a pointer to the cpu struct we need to relocate it once
+ we get into ram.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9c671e7062720074f894ee329eaa6995b0823727
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Wed Sep 2 02:17:24 2009 +0400
+
+ fsl: sys_eeprom: Fix 'may be used uninitialized' warning
+
+ The warning is bogus, so silence it by initializing the 'ret' variable.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Acked-by: Timur Tabi <timur@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6b9ea08c5010eab5ad1056bc9bf033afb672d9cc
+Author: Dipen Dudhat <dipen.dudhat@freescale.com>
+Date: Tue Sep 1 17:27:00 2009 +0530
+
+ ppc/85xx: Use CONFIG_FSL_ESDHC to enable sdhc clk
+
+ Enable eSDHC Clock based on generic CONFIG_FSL_ESDHC define instead of a
+ platform define. This will enable all the 85xx platforms to use sdhc_clk
+ based on CONFIG_FSL_ESDHC.
+
+ Signed-off-by: Gao Guanhua <B22826@freescale.com>
+ Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 92477a631bbda2dc0dd2194e03f9bd3ddb8b9c21
+Author: Timur Tabi <timur@freescale.com>
+Date: Fri Sep 4 16:28:35 2009 -0500
+
+ fsl_i2c: increase I2C timeout values and make them configurable
+
+ The value of I2C_TIMEOUT in fsl_i2c.c has several problems. First, it is
+ defined as CONFIG_HZ/4, but it is used as a count of microseconds, so it makes
+ no sense to derive it from a clock rate. Second, the current value (250) is
+ too low for some boards, so it needs to be increased. Third, the timeout
+ necessary for multiple-master arbitration is larger than the timeout for basic
+ read/write operations, so we shouldn't have a single constant for both timeouts.
+ Finally, it would be nice if we could override these values on a per-board
+ basis.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Acked-by: Wolfgang Denk <wd@denx.de>
+ Tested-by: Peter Tyser <ptyser@xes-inc.com>
+ Acked-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 5da71efa18e8b4eac9afd8bfa13e3c7e7ddde1d0
+Author: Eric Millbrandt <emillbrandt@coldhaus.com>
+Date: Thu Sep 3 08:09:44 2009 -0500
+
+ Reset i2c slave devices during init on mpc5xxx cpus
+
+ Reset any i2c devices that may have been interrupted during a system reset.
+ Normally this would be accomplished by clocking the line until SCL and SDA
+ are released and then sending a start condtiion (From an Atmel datasheet).
+ There is no direct access to the i2c pins so instead create start commands
+ through the i2c interface. Send a start command then delay for the SDA Hold
+ time, repeat this by disabling/enabling the bus a total of 9 times.
+
+ Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
+
+commit 2d4072c06b5549444e4140231bba3d47d9b0bc53
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Sat Aug 15 11:20:58 2009 -0400
+
+ ARM: DaVinci: Adding Support for DaVinci DM365 EVM
+
+ This patch adds support for the DM365 EVM.
+ It has been tested on a DM365 EVM.
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+
+commit cf463091bce8b0f8951dd08f94754d08d64793b8
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Sat Aug 15 11:20:44 2009 -0400
+
+ ARM: DaVinci: DaVinci DM365 SOC specific code
+
+ This patch adds support for DaVinci DM365 SOC.
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+
+commit e830b66b3592f115316600d370399f3ee148e909
+Author: Ilko Iliev <iliev@ronetix.at>
+Date: Sat Sep 5 02:51:34 2009 +0200
+
+ DM9000 init for pm9261
+
+ Signed-off-by: Ilko Iliev <iliev@ronetix.at>
+
+commit c35d7cf071f171bd6bba69f1563a6ac578a18ea6
+Author: Frederik Kriewitz <frederik@kriewitz.eu>
+Date: Sun Aug 23 12:56:42 2009 +0200
+
+ Add support for the DevKit8000 board
+
+ This patch adds support for the DevKit8000 board.
+
+ Signed-off-by: Frederik Kriewitz <frederik@kriewitz.eu>
+
+commit 127f9ae575991aee3e105e1448c49b5b4e254998
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Aug 23 16:32:40 2009 +0200
+
+ omap3: move the other boards to board/
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 350f3ac5731faf0f02ca55ab016694b7c7269f97
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Aug 23 16:32:39 2009 +0200
+
+ arm: move Logicpd's boards to board/logicpd/
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0a0e4bad9693ef1d2ca8c33ba551d395a4e3d641
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Aug 23 16:32:38 2009 +0200
+
+ omap: move TI's boards to board/ti/
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9f23ca42b3ba19b24e66fade572f2b86d929b6e8
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Sep 4 23:20:29 2009 +0200
+
+ ARM: Update mach-types
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 262ae0a6193f10b6a94e86d2f752e7f5510416fa
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Sep 3 23:12:47 2009 -0400
+
+ push LOAD_ADDR out to arch mk files
+
+ Rather than maintain/extend the current ifeq($(ARCH)) mess that exists in
+ the standalone Makefile, push the setting up of LOAD_ADDR out to the arch
+ config.mk (and rename to STANDALONE_LOAD_ADDR in the process). This keeps
+ the common code clean and lets the arch do whatever crazy crap it wants in
+ its own area.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 7662eb2b9d6fbc95ecb1fb3e5b5147215e251e7d
+Author: Giuseppe CONDORELLI <giuseppe.condorelli@st.com>
+Date: Thu Sep 3 07:37:46 2009 -0400
+
+ zlib: fix code when DEBUG is defined
+
+ Removed stdio.h inclusion and moved trace macros to use printf avoiding to
+ write debug informations to standard error.
+
+ Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com>
+
+commit cfcbf8c4cf3da96b9e3f652506b664bfd766a520
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Sep 2 16:45:31 2009 -0500
+
+ mxc_nand: Remove Freescale's "All Rights Reserved."
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 001d615681333569c555e6cde07d8d23e2c536fb
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Wed Sep 2 17:58:48 2009 +0400
+
+ mpc83xx/serdes: License cleanup: remove "All Rights Reserved" notice
+
+ "All Rights Reserved" conflicts with the GPL.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 46ff6d461321f5b565cc790e02679237ffd9a20f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Sep 2 14:57:27 2009 +0200
+
+ License cleanup: remove unintended "All Rights Reserved" notices.
+
+ Some files included my old standerd file header which had a "All
+ Rights Reserved" part. As this has never been my intention, I remove
+ these lines to make the files compatible with GPL v.2 and later.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 37daa77f3cafb5ec9a974eff3db2af4a0560a9ef
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Sep 2 10:21:20 2009 +0200
+
+ cmd_mtdparts.c: fix compiler warning in debug code
+
+ Fix warning messages:
+ cmd_mtdparts.c:1429: warning: format '%08lx' expects type 'long
+ unsigned int', but argument 6 has type 'u32'
+ cmd_mtdparts.c:1429: warning: format '%08lx' expects type 'long
+ unsigned int', but argument 7 has type 'u32'
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d8bc55a6fb28876abcbf4a3fc3b6c3ce429c1bb3
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Tue Sep 1 20:58:03 2009 +0400
+
+ Move uninitialized_var() macro from ubi_uboot.h to compiler.h
+
+ This is needed so that we could use this macro for non-UBI code.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit d72871e1387094972569e4b77c25e88020f7b68f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Sep 1 11:24:45 2009 -0500
+
+ arm: Remove -fno-strict-aliasing
+
+ -fno-strict-aliasing is hidding warnings.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d6281ff0cc2ebb5d6a5c3e1021837334074f92ec
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Sep 1 11:24:44 2009 -0500
+
+ ppc: Remove -fno-strict-aliasing
+
+ -fno-strict-aliasing is hidding warnings.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 795d246c278e70b4ba9868cc9f2c8fbada49d388
+Author: Eric Millbrandt <emillbrandt@coldhaus.com>
+Date: Fri Aug 28 07:14:04 2009 -0500
+
+ galaxy5200: Add chip select region for an Epson S1D15313
+
+ Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
+
+commit 3dfad40a0459f63099e177dc15a1df39d048f860
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Aug 27 08:23:55 2009 -0500
+
+ Add ability for arch code to make changes before we boot
+
+ Added a arch_preboot_os() function that cpu specific code can implement to
+ allow for various modifications to the state of the machine right before
+ we boot. This can be useful to setup register state to a specific
+ configuration.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9ea005fb4428c922536fa75991ce9972304a02fb
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date: Sat Aug 22 03:49:52 2009 +0800
+
+ Use different PBA value for E1000 PCI and PCIe cards
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+ Acked-by: André Schwarz <andre.schwarz@matrix-vision.de>
+
+commit 5b34a296d47b236dafbcaf1c91ae11b5aeb1ef51
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Aug 23 12:59:58 2009 +1000
+
+ Add PCI support to eNET board
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit f50b619d9cb297b0125fe78dcd6f255eb0d91659
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Aug 23 12:59:57 2009 +1000
+
+ i386: Moved PCI from #ifdef to conditional compile for sc520 boards
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit ed7a1b681de1e31d18d5b92e2767ae8df3241687
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Aug 23 12:59:56 2009 +1000
+
+ i386: Replace [read, write]_mmcr_[byte, word, long] with memory mapped structure
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit 9b32f96b5b92ba13fdb4b5eb637734752235f260
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Aug 23 12:59:55 2009 +1000
+
+ Misc sc520 cdp fixups
+
+ Now that the PCI, SATA et al compile problems have been resolved, the
+ cludge that was applied to avoid them can be removed
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit 91ee4e183cb7ac5f86e7673ead51400f19906635
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Aug 23 12:59:54 2009 +1000
+
+ Fixup sc520_spunk board
+
+ Primary intent is to resolve build errors for this board which has been
+ neglected for a very long time. I do not have one of these boards, so I
+ cannot test functionality
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit 8907b8dbc5805094f1316d64737d3428b3863693
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Aug 23 12:59:53 2009 +1000
+
+ Misc ds1722 fixups
+
+ This patch is based on a patch submitted by Jean-Christophe PLAGNIOL-VILLARD
+ on 18th May 2008 as part of a general i386 / sc520 fixup which was never
+ applied
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit a92510e7fae523145b58765cdc46110f1162260d
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Aug 23 12:59:52 2009 +1000
+
+ Misc ti_pci1410a fixups
+
+ Removed do_pinit() - now declared in cmd_pcmcia.c
+
+ Added #define CONFIG_CMD_PCMCIA around pcmcia_off() in line with other
+ PCMCIA drivers
+
+ signed/unsigned type fixups
+
+ Added semi-colon after default: label as required by newer gcc
+
+ The only board that appears to use this driver is the sc520_spunk which
+ is very old and very likely very broken anyway. I do not have one to test
+ whether this patch breaks anything functionaly, I have can only check
+ that it compiles without warning or error
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit 31b9ab33d93d88ff89f3046aa45c68667a378a56
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Aug 23 12:59:51 2009 +1000
+
+ Misc SATA fixups
+
+ Cast first parameter to sata_cpy()
+
+ In /drivers/block/ata_piix.h, ata_id_has_lba48(), ata_id_has_lba(),
+ ata_id_has_dma(), ata_id_u32(), ata_id_u64() are all defined in
+ include/libata.h which is included in ata.h which is included by all files
+ which include ata_piix.h (only ata_piix.c) so these definitions are
+ supurflous to (and conlict with) this in libata.h. Interestingly, my
+ compiler complains about ata_id_u64 already being defined, but not
+ ata_id_u32
+
+ ata_dump_id() is defined in include/libata.h and should not be static
+ (maybe should even use ata_dump_id() in libata.c
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit d7549024098af093785151261266a02be19af633
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Aug 23 12:59:50 2009 +1000
+
+ i386: Misc PCI fixups
+
+ Change PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY (Originally done in
+ commit ff4e66e93c1a, regressed by commit 6d7f610b09f8)
+
+ Cast PCI_ROM_ADDRESS_MASK to u32
+
+ Wrap probe_pci_video() call inside #ifdef CONFIG_VIDEO
+
+ Change call to pci_find_class() to pci_find_devices(). This is based on a
+ patch submitted on 1st March 2007 (Patch that fixes the compilation errors
+ for sc520_cdp board) by mushtaq_k
+
+ This patch requires that PCI_VIDEO_VENDOR_ID and PCI_VIDEO_DEVICE_ID be
+ specified in the board config file. Dummy values have been added for the
+ SC520 CDP board to enable compilation, but since I do not have one of these,
+ I do know what the values should be
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit 04ff9ab158714d43cdf2f4f6f0235c3ea9d241a2
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Aug 23 12:59:49 2009 +1000
+
+ Fix sc520 timer interrupt generation
+
+ The current implementation has the timer being started before the interrupt
+ handler is installed. It the interrupt occurs before the handler is
+ installed, the timer interrupt is never reset and the timer stops
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit f3a8d6b29b1cd01fdd940e8ff7a62b1df0ebbf82
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Aug 23 12:59:48 2009 +1000
+
+ Fix environment configuration for eNET board
+
+ The current configuration of the Environment has the redundant copy of the
+ environment in the Boot Flash - This was never the intent. The Environment
+ should instead be in the first two sectors of the first Strata Flash
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit ea0c37798c3823fdd77edfffd27b20191f8ca1f0
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Aug 23 12:59:47 2009 +1000
+
+ i386: Fix regression introduced by commit 8c63d47651f7
+
+ A local variable was deleted that should not have been
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit cfb3a736ffcff3e3753b902cad536f22fcf8961d
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Aug 23 12:59:46 2009 +1000
+
+ i386: Change inline asm global symbols to local
+
+ gcc 4.3.2 optimiser creates multiple copies of inline asm (who knows why)
+ Remove use of global names for labels to prevent 'symbol already defined'
+ errors
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit a3ab8caee696a1d53fc82fa321e2b2f179970168
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Aug 23 12:59:45 2009 +1000
+
+ i386: Add errno.h
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit d4e8ada0f6d51e0e3b80790fb9375ac8910f5352
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Aug 21 23:05:21 2009 -0500
+
+ Consolidate arch-specific mem_malloc_init() implementations
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit a483a167bc8d808145ca1224a2c238cda90aa60c
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Aug 21 23:05:20 2009 -0500
+
+ Standardize mem_malloc_init() implementation
+
+ This lays the groundwork to allow architectures to share a common
+ mem_malloc_init().
+
+ Note that the x86 implementation was not modified as it did not fit the
+ mold of all other architectures.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 5e93bd1c9aaea886c5e5c7c1b6114ab36c30668f
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Aug 21 23:05:19 2009 -0500
+
+ Consolidate arch-specific sbrk() implementations
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 65f6f07b72a71b83d775c4d20d7ebcd6b2d2086d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Jul 23 16:37:03 2009 -0400
+
+ atmel_df_pow2: standalone to convert dataflashes to pow2
+
+ Atmel DataFlashes by default operate with pages that are slightly bigger
+ than normal binary sizes (i.e. many are 1056 byte pages rather than 1024
+ bytes). However, they also have a "power of 2" mode where the pages show
+ up with the normal binary size. The latter mode is required in order to
+ boot with a Blackfin processor, so many people wish to convert their
+ DataFlashes on their development systems to this mode. This standalone
+ application does just that.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit cb95c7a935ab9b52dac5d08e5ba4007c5a480f97
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Sep 2 05:52:37 2009 -0400
+
+ Blackfin: cm-bf548: fix device->stdio_dev fallout
+
+ The recent 52cb4d4fb348 commit which renamed device to stdio_dev missed the
+ cm-bf548's video board.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c7bcdde46a7ef78628f0f09fdc6cb61bb1bd7e79
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Sep 2 04:21:16 2009 -0400
+
+ Blackfin: enable 64bit printf for nand
+
+ Since the NAND code now uses 64bit code, make sure we enable support for
+ ADI Blackfin boards in printf to avoid the warning:
+ nand_util.c:45:2: warning: #warning Please define CONFIG_SYS_64BIT_VSPRINTF for correct output!
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 9c46e71af2b03ccd721c56b1dc906ead702d6fb5
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Aug 24 20:48:04 2009 -0400
+
+ Blackfin: use scratch pad for exception stack
+
+ If the memory layout pushes the stack out of the default DCPLB coverage,
+ the exception handler may trigger a double fault by trying to push onto
+ the uncovered stack. So handle the exception stack similar to the kernel
+ by using the top of the scratch pad SRAM.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 69a25ce3578f34c8accb476f70089f3a44b78ed9
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Aug 24 20:36:25 2009 -0400
+
+ Blackfin: increase default console size
+
+ The default console size indirectly applies to length of env vars, so a
+ smaller length makes it hard to pass longer command lines to kernels.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit f541e1d6d99c22bbd4bc8c84fdb02baad0277847
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Aug 24 19:03:18 2009 -0400
+
+ Blackfin: fix debug printf modifiers
+
+ The display_global_data() function generated warnings with pretty much
+ every variable.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 4640c2b8699bcdd2346a2c633486f07f061a2939
+Author: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
+Date: Thu Aug 20 19:20:41 2009 -0400
+
+ Blackfin: cm-bf537u: new board port
+
+ The CM-BF537U is similar to the CM-BF537E module, but enough to need its
+ own board port.
+
+ Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c4db335c2e0805e1ce4c33d278b77492c0812353
+Author: Robin Getz <robin.getz@analog.com>
+Date: Mon Aug 17 15:23:02 2009 +0000
+
+ Blackfin: change global data register from P5 to P3
+
+ Since the Blackfin ABI favors higher scratch registers by default, use the
+ last scratch register (P3) for global data rather than the first (P5).
+ This allows the compiler's register allocator to use higher number scratch
+ P registers, which in turn better matches the Blackfin instruction set,
+ which reduces the size of U-Boot by more than 1024 bytes...
+
+ Signed-off-by: Robin Getz <robin.getz@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 574b70df03fba0ea635e2fe71fbd7b97d19b706a
+Author: Robin Getz <robin.getz@analog.com>
+Date: Tue Aug 11 14:20:13 2009 +0000
+
+ Blackfin: enable more network commands for ADI dev boards
+
+ Add dns and ntp to default networking commands, and ask for more dhcp
+ options to better configure the network environment.
+
+ Signed-off-by: Robin Getz <robin.getz@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit aa7b248a05323d4720969227603e39a22777ed95
+Author: Michael Hennerich <michael.hennerich@analog.com>
+Date: Thu Jun 18 09:12:50 2009 +0000
+
+ Blackfin: bf537-stamp: comment CF-Flash Card Support better
+
+ Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 69c6d268a29cf6d61e096d815abf5abf24136f45
+Author: Robin Getz <robin.getz@analog.com>
+Date: Fri Jul 10 18:37:15 2009 +0000
+
+ Blackfin: use +(filesize) to make sure we are only doing what is necessary
+
+ Signed-off-by: Robin Getz <robin.getz@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2dc851e3b0f07a56f83060f13882ff4b62cf5112
+Author: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+Date: Thu Aug 20 16:04:49 2009 +0200
+
+ Support for the Calao TNY-A9260/TNY-A9G20 boards
+
+ The Calao TNY-A9260 and TNY-9G20 are boards manufactured and sold by
+ Calao Systems <http://www.calao-systems.com>. Their components are very
+ similar to the AT91SAM9260EK board, so their configuration is based on
+ the configuration of this board. There are however some differences:
+ different clocks, no LCD, no ethernet. They also can use SPI EEPROM to
+ store the environment.
+
+ Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 49d2cb4d6153a6c18249dccb5de5cffeb261a61c
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Thu Aug 20 20:59:28 2009 +0530
+
+ arm: Kirkwood: add SYSRSTn Duration Counter Support
+
+ This feature can be used to trigger special command "sysrstcmd" using
+ reset key long press event and environment variable "sysrstdelay" is set
+ (useful for reset to factory or manufacturing mode execution)
+
+ Kirkwood SoC implements a hardware-based SYSRSTn duration counter.
+ When SYSRSTn is asserted low, a SYSRSTn duration counter is running.
+ The counter value is stored in the SYSRSTn Length Counter Register
+ The counter is based on the 25-MHz reference clock (40ns)
+ It is a 29-bit counter, yielding a maximum counting duration of
+ 2^29/25 MHz (21.4 seconds). When the counter reach its maximum value,
+ it remains at this value until counter reset is triggered by setting
+ bit 31 of KW_REG_SYSRST_CNT
+
+ Implementation:
+ Upon long reset assertion (> ${sysrstdelay} in secs) sysrstcmd will be
+ executed if pre-defined in environment variables.
+ This feature will be disabled if "sysrstdelay" variable is unset.
+
+ for-ex.
+ setenv sysrst_cmd "echo starting factory reset;
+ nand erase 0xa0000 0x20000;
+ echo finish ed sysrst command;"
+ will erase particular nand sector if triggered by this event
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+commit 9453967e28c5e3abbf856f95735ea69bae1e77fa
+Author: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+Date: Mon Aug 24 18:03:26 2009 +0200
+
+ Add support for the Calao SBC35-A9G20 board
+
+ The Calao SBC35-A9G20 board is manufactured and sold by Calao Systems
+ <http://www.calao-systems.com>. It is built around an AT91SAM9G20 ARM SoC
+ running at 400MHz. It features an Ethernet port, an SPI RTC backed by an onboard
+ battery , an SD/MMC slot, a CompactFlash slot, 64Mo of SDRAM, 256Mo of NAND
+ flash, two USB host ports, and an USB device port. More informations can be
+ found at <http://www.calao-systems.com/articles.php?lng=en&pg=5936>
+
+ Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+
+commit 10bc241dfc15a0820d9c52469173b7ccafec0b84
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Tue Aug 11 02:32:09 2009 +0400
+
+ imx27lite: add support for imx27lite board from LogicPD
+
+ This patch adds support for i.MX27-LITEKIT development board from
+ LogicPD. This board uses i.MX27 SoC and has 2MB NOR flash, 64MB NAND
+ flash, FEC ethernet controller integrated into i.MX27.
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+ Acked-by: Wolfgang Denk <wd@denx.de>
+
+commit 50b5fff55827946c86a60db8b21a9358be720666
+Author: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+Date: Tue Sep 1 11:26:20 2009 +0200
+
+ at91sam9260/afeb9260: Fix SPI initialization
+
+ Commit 7ebafb7ec1a0285af8380623c009576f92583b98 introduced a mistake in the spi
+ init function call for those boards. This patch fixes this.
+
+ Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+
+commit f3d4f8870e69e0fd177397778d97d0751bbd020a
+Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
+Date: Tue Aug 18 11:13:44 2009 +0200
+
+ Remove duplicate set_cr
+
+ Remove duplicate set_cr
+
+ set_cr is defined in both asm-arm/proc-armv/system.h and
+ include/asm-arm/system.h. This patch removes it (and some duplicate
+ defines) from the former.
+
+ Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+
+commit 3d35d87d5482de23cd5dc4d7721b1086107cae50
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Aug 31 19:57:42 2009 +0200
+
+ Prepare 2009.08
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 632a6dd0b612eb7b143f789f2a0273917468c041
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Mon Aug 31 16:18:24 2009 +0200
+
+ Add common code dir for Matrix Vision boards.
+
+ This fixes current build failure.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+
+ mvblm7.c: fix warning: implicit declaration of function
+ 'mv_reset_environment'
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 52f6c34c85d6c16f2a41433b5000490ecf374992
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Sun Aug 30 11:05:29 2009 -0700
+
+ bugfix CONFIG_SYS_CONSOLE_INFO_QUIET
+
+ The "console: unify printing current devices" patch goofed:
+ CONFIG_SYS_CONSOLE_INFO_QUIET is supposed to *REMOVE* boot
+ time noise, not add it. Said patch changed the #ifndefs
+ to #ifdef; this one restores them to the proper sense.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit 2d04db088e6df8a008bb09f604876a45031df93b
+Author: Timur Tabi <timur@freescale.com>
+Date: Fri Aug 28 16:56:45 2009 -0500
+
+ fsl: simplify the "mac id" command, improve boot-time informational message
+
+ The "mac id" command took a 4-character parameter as the identifier string.
+ However, for any given board, only one kind of identifier is acceptable, so it
+ makes no sense to ask the user to type it in. Instead, if the user enters
+ "mac id", the identifier (and also the version, if it's NXID) will
+ automatically be set to the correct value.
+
+ Improve the message that is displayed when EEPROM is read during boot. It now
+ displays "EEPROM:" and then either an error message or the EEPROM identifier
+ if successful.
+
+ If the identifier in EEPROM is valid, then always reject a bad CRC, even if the
+ CRC field has not been initialized.
+
+ Don't force the MAC address count to MAX_NUM_PORTS or less. Forcing the value
+ to be changed resulting in an in-memory copy that does not match what's in
+ hardware, even though the user did not request that change.
+
+ Finally, always update the CRC value in the in-memory copy after any field
+ is changed, so that the CRC is always correct.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 33f3f34255bd7cf0be502275c59f0ff22dc50080
+Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+Date: Fri Aug 21 07:29:58 2009 +0530
+
+ 85xx: Added PCIe support for P1 P2 RDB
+
+ Call fsl_pci_init_port() to initialize all the PCIe ports on the board.
+
+ Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0d3d68b25a8e7790f58530ddccbd61f9fc0245ef
+Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+Date: Fri Aug 21 07:29:42 2009 +0530
+
+ driver/fsl_pci: Add fsl_pci_init_port function to initialize a PCI controller
+
+ fsl_pci_init_port can be called from board specific PCI initialization
+ routines to setup the PCI (or PCIe) controller. This will reduce code
+ redundancy in most of the 85xx/86xx FSL board ports that setup PCI.
+
+ Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 05f6f66474312ad03c39b4ca4875af46c87366bf
+Author: Timur Tabi <timur@freescale.com>
+Date: Thu Aug 20 17:41:11 2009 -0500
+
+ 85xx: Improve MPIC initialization
+
+ The MPIC initialization code for Freescale e500 CPUs was not using I/O
+ accessors, and it was not issuing a read-back to the MPIC after setting
+ mixed mode. This may be the cause of a spurious interrupt on some systems.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c17b79fbd0c7923948331d65cb588734a9c681ff
+Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+Date: Thu Aug 20 18:59:18 2009 +0530
+
+ 85xx: Added support for P1011RDB and P2010RDB
+
+ P1011 and P2010 are single core variants of P1010 and P2020 respectively.
+ The board(RDB) will be same.
+
+ Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a713ba926b45da9a6f923f1ac9e60a66852e5f2d
+Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+Date: Thu Aug 20 18:57:45 2009 +0530
+
+ 85xx: Added single core members of FSL P1xx/P2xx processors series
+
+ P1011 - Single core variant of P1020
+ P2010 - Single core variant of P2020
+
+ Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit bf488bc0949fc900d1296a7f35a38a6a28cb5fab
+Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+Date: Thu Aug 20 18:57:02 2009 +0530
+
+ 85xx: P1020RDB Support Added
+
+ Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3b1f243b8dad30a646a0f056b0268519eadbc3c5
+Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+Date: Thu Aug 20 18:55:35 2009 +0530
+
+ 85xx: Added CONFIG_MAX_CPUS for P1020
+
+ Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 76b474e2f5a223fcabfeaa4f1c8fb699062b986c
+Author: Mingkai Hu <Mingkai.hu@freescale.com>
+Date: Tue Aug 18 15:37:15 2009 +0800
+
+ 85xx: Add L2SRAM Register's macro definition
+
+ Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 158c6724c99368a4d8eef11ee7e3c7ad0ef03a15
+Author: Felix Radensky <felix@embedded-sol.com>
+Date: Sat Aug 15 15:08:37 2009 +0300
+
+ 85xx: Fix memory test range on MPC8536DS
+
+ With current values of CONFIG_SYS_MEMTEST_START and CONFIG_SYS_MEMTEST_END
+ memory test hangs if run without arguments. Set them to sane values, so
+ that all available 512MB of RAM excluding exception vectors at the bottom
+ and u-boot code and stack at the top can be tested.
+
+ Signed-off-by: Felix Radensky <felix@embedded-sol.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ef41f2a25c554604156b59f5945feadae2f3cb55
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Aug 12 00:10:44 2009 -0500
+
+ 85xx: Removed BEDBUG support on P1_P2_RDB
+
+ To match all other 85xx platforms we are removing BEDBUG support.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit b560ab85edfb68da653bf2527c390c3e182392a1
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Sat Aug 8 10:42:30 2009 -0500
+
+ 85xx: Init pci ethernet cards if we enable any on MPC8572DS
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 1bb61b69f7aba4931ede35fdcabd8e5ecad121d7
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Aug 7 13:16:34 2009 -0500
+
+ xes: Use proper IO access functions
+
+ Also fix some minor whitespace oddities while we're cleaning up
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ec79d33b2c41ee8b6d1354cc0910217b769c5036
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 7 13:00:55 2009 -0500
+
+ 85xx: Move to a common linker script
+
+ There are really no differences between all the 85xx linker scripts so
+ we can just move to a single common one. Board code is still able to
+ override the common one if need be.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 87c7661b42aa7672539b54b51d3d5c4013ec6f6c
+Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+Date: Fri Jul 31 12:08:27 2009 +0530
+
+ 85xx: Added P1020 Processor Support.
+
+ P1020 is another member of QorIQ series of processors which falls in ULE
+ category. It is an e500 based dual core SOC.
+
+ Being a scaled down version of P2020 it has following differences:
+ - 533MHz - 800MHz core frequency.
+ - 256Kbyte L2 cache
+ - Ethernet controllers with classification capabilities.
+ Also the SOC is pin compatible with P2020
+
+ Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 728ece343e8bb2a66ee977c49d455439e3b28da9
+Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+Date: Wed Aug 5 13:29:24 2009 +0530
+
+ 85xx: Add support for P2020RDB board
+
+ The code base adds P1 & P2 RDB platforms support.
+ The folder and file names can cater to future SOCs of P1/P2 family.
+ P1 & P2 processors are 85xx platforms, part of Freescale QorIQ series.
+
+ Tested following on P2020RDB:
+ 1. eTSECs
+ 2. DDR, NAND, NOR, I2C.
+
+ Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0e870980a64584a591af775bb9c9fe9450124df9
+Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+Date: Fri Jul 31 12:08:14 2009 +0530
+
+ 8xxx: Removed CONFIG_NUM_CPUS from 85xx/86xx
+
+ The number of CPUs are getting detected dynamically by checking the
+ processor SVR value. Also removed CONFIG_NUM_CPUS references from all
+ the platforms with 85xx/86xx processors.
+
+ This can help to use the same u-boot image across the platforms.
+
+ Also revamped and corrected few Freescale Copyright messages.
+
+ Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 18bacc2027f8531d8dec15ba8da3242dfb4e63f3
+Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+Date: Fri Jul 31 12:07:45 2009 +0530
+
+ 8xxx: Refactored common cpu specific code for 85xx/86xx into one file.
+
+ Removed same code pieces from cpu/mpc85xx/cpu.c and cpu/mpc86xx/cpu.c
+ and moved to cpu/mpc8xxx/cpu.c(new file)
+
+ Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 7b18c227b847e4782eb1492219ebd555f521b08b
+Author: Alex Dubov <oakad@yahoo.com>
+Date: Fri Aug 7 15:28:32 2009 +1000
+
+ stx: create common vendor/board hierarchy for STx boards
+
+ Move files belonging to the STx boards into common vendor directory and
+ update the Makefile to reflect this.
+
+ Signed-off-by: Alex Dubov <oakad@yahoo.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit bafdf9aa9dbb69d937b72db17ed5800998c59523
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Aug 4 17:38:00 2009 -0500
+
+ 85xx: Remove unused CONFIG_CLEAR_LAW0 defines
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 73aacc522849486b60a5611f678f0bf1c3053779
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Aug 6 18:38:43 2009 -0500
+
+ 86xx: Remove redudant PLATFORM_CPPFLAGS
+
+ For historic reasons we had defined some additional PLATFORM_CPPFLAGS like:
+
+ PLATFORM_CPPFLAGS += -DCONFIG_MPC86xx=1
+ PLATFORM_CPPFLAGS += -DCONFIG_MPC8641=1
+
+ However these are all captured in the config.h and thus redudant. Also
+ moved common 86xx flags into cpu/mpc86xx/config.mk.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 53efa1f1acacacb76fa9a21b09b3294783a11c03
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Aug 6 18:28:34 2009 -0500
+
+ 85xx: Remove redudant PLATFORM_CPPFLAGS
+
+ For historic reasons we had defined some additional PLATFORM_CPPFLAGS
+ like:
+
+ PLATFORM_CPPFLAGS += -DCONFIG_E500=1
+ PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
+ PLATFORM_CPPFLAGS += -DCONFIG_MPC8548=1
+
+ However these are all captured in the config.h and thus redudant.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 337f9fde2e9317c1d9e85a4a8955a2f14730a00f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jul 30 15:54:07 2009 -0500
+
+ 85xx: Add a 36-bit physical configuration for MPC8536DS
+
+ We move all IO addressed (CCSR, localbus, PCI) above the 4G boundary
+ to allow for larger memory sizes.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Wolfgang Denk <wd@denx.de>
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ecead84d56b0ced67b727f5ce21ba08c53b5f09e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 4 09:10:03 2009 -0500
+
+ 85xx: Cleanup whitespace in mpc8536ds.c
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ad19e7a5d2de337064ce7728d6504df9648f5d31
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Aug 5 07:59:35 2009 -0500
+
+ pci/fsl_pci_init: Rework PCI ATMU setup to handle >4G of memory
+
+ The old PCI ATMU setup code would just mimic the PCI regions into the
+ ATMU registers. For simple memory maps in which all memory, MMIO, etc
+ space fit into 4G this works ok. However there are issues with we have
+ >4G of memory as we know can't access all of memory and we need to
+ ensure that PCICSRBAR (PEXCSRBAR on PCIe) isn't overlapping with
+ anything since we can't turn it off.
+
+ We first setup outbound windows based on what the board code setup
+ in the pci regions for MMIO and IO access. Next we place PCICSRBAR
+ below the MMIO window. After which we try to setup the inbound windows
+ to map as much of memory as possible.
+
+ On PCIe based controllers we are able to overmap the ATMU setup since
+ RX & TX links are separate but report the proper amount of inbound
+ address space to the region tracking to ensure there is no overlap.
+
+ On PCI based controllers we use as many inbound windows as available to
+ map as much of the memory as possible.
+
+ Additionally we changed all the CCSR register access to use proper IO
+ accessor functions. Also had to add CONFIG_SYS_CCSRBAR_PHYS to some
+ 86xx platforms that didn't have it defined.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8295b94400449586505ffe34ec024feb3d2c8fe4
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Aug 5 07:49:27 2009 -0500
+
+ pci/fsl_pci_init: Use PCIe capability to determine if controller is PCIe
+
+ Change the code to use the PCIe capabilities register to determine if we
+ are a PCIe controller or not. Additionally cleaned up some white space
+ and formatting in the file.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit cb151aa2cf5fbb1e412fc763a3a611758f066238
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Aug 3 21:02:02 2009 -0500
+
+ pci/fsl_pci_init: Fold fsl_pci_setup_inbound_windows into fsl_pci_init
+
+ Every platform that calls fsl_pci_init calls fsl_pci_setup_inbound_windows
+ before it calls fsl_pci_init. There isn't any reason to just call it
+ from fsl_pci_init and simplify things a bit.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit fb3143b35eb5890ec72e79d17a6068a84a057d47
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Aug 3 20:44:55 2009 -0500
+
+ pci/fsl_pci_init: Fold pci_setup_indirect into fsl_pci_init
+
+ Every platform that calls fsl_pci_init calls pci_setup_indirect before
+ it calls fsl_pci_init. There isn't any reason to just call it from
+ fsl_pci_init and simplify things a bit.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 28887d831b02c66ccc10d7f1379204b5a62f4543
+Author: André Schwarz <andre.schwarz@matrix-vision.de>
+Date: Thu Aug 27 14:48:35 2009 +0200
+
+ Use common code for Matrix Vision boards
+
+ Clean up existing boards (mvBC-P/MPC5200 and mvBL-M7/MPC8343) by
+ using common code.
+
+ Signed-off-by: André Schwarz <andre.schwarz@matrix-vision.de>
+
+commit 05f91a65abc3180e2896cd8ddee7a34b1d1ce6e0
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Aug 26 21:27:37 2009 -0500
+
+ mpc83xx: mpc8349itx - accommodate larger kernel sizes & unzero the bootdelay
+
+ apparently the ITX was missed last round.
+
+ Also make bootdelay consistent with other boards, so as to give on the
+ opportunity to fix mistakenly set bootcmd without having checked for an
+ bootdelay zero setting first.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit cc861f7127f200e704baaf061a7f508e3c93f2a3
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Aug 26 21:25:46 2009 -0500
+
+ mpc83xx: match dtb filename references to their dts equivalents in the linux kernel
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 77b351cd0f20483eefa09bebebb3e0cbf5555b2c
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Tue Aug 18 10:10:42 2009 -0400
+
+ NAND: DaVinci: V2 Adding 4 BIT ECC support
+
+ This patch adds 4 BIT ECC support in the DaVinci NAND
+ driver. Tested on both the DM355 and DM365.
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit f83b7f9e8a5d1334e24506ea5953dd871596ea8a
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Mon Aug 10 13:27:56 2009 -0400
+
+ MTD:NAND: ADD new ECC mode NAND_ECC_HW_OOB_FIRST
+
+ This patch adds the new mode NAND_ECC_HW_OOB_FIRST in the nand code to
+ support 4-bit ECC on TI DaVinci devices with large page (up to 2K) NAND
+ chips. This ECC mode is similar to NAND_ECC_HW, with the exception of
+ read_page API that first reads the OOB area, reads the data in chunks,
+ feeds the ECC from OOB area to the ECC hw engine and perform any
+ correction on the data as per the ECC status reported by the engine.
+
+ This patch has been accepted by Andrew Morton and can be found at
+
+ http://userweb.kernel.org/~akpm/mmotm/broken-out/mtd-nand-add-new-ecc-mode-ecc_hw_oob_first.patch
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+ Signed-off-by: Sneha Narnakaje <nsnehaprabha@ti.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 36fab997d85d89ee7fd2c7fd6057fab786d556aa
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Tue Aug 11 02:32:54 2009 +0400
+
+ mxc_nand: add nand driver for MX2/MX3
+
+ Driver for NFC NAND controller found on Freescale's MX2 and MX3
+ processors. Ported from Linux. Tested only with i.MX27 but should
+ works with other MX2 and MX3 processors too.
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit a2c65b47effcb3d0aa23e58596538acd338ac7c5
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Mon Aug 10 13:27:46 2009 -0400
+
+ NAND: ADD page Parameter to all read_page/read_page_raw API's
+
+ This patch adds a new "page" parameter to all NAND read_page/read_page_raw
+ APIs. The read_page API for the new mode ECC_HW_OOB_FIRST requires the
+ page information to send the READOOB command and read the OOB area before
+ the data area.
+
+ This patch has been accepted by Andrew Morton and can be found at
+ http://userweb.kernel.org/~akpm/mmotm/broken-out/mtd-nand-add-page-parameter-to-all-read_page-read_page_raw-apis.patch
+
+ WE would like this to become part of the u-boot GIT as well
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+ Signed-off-by: Sneha Narnakaje <nsnehaprabha@ti.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit de4250929f37e6c16860741b74546bedbe0bdaba
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Jul 21 17:13:40 2009 +0200
+
+ 83xx, kmeter1: added NAND support
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit ecad289fc6bd9d89ef4d5093cc7b6fd712fd0d29
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Tue Jul 21 11:58:04 2009 +0900
+
+ OneNAND: Remove unused read_spareram
+
+ Remove unused read_spareram and add unlock_all as kernel does
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 403ce1f759b5acec8514cd7e10ce76704fed519c
+Author: Matthias Kaehlcke <matthias@kaehlcke.net>
+Date: Thu Jul 16 21:19:29 2009 +0200
+
+ KB9202: Add NAND support
+
+ Add KB9202 NAND driver
+
+ Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit ce3277a6f2c082f39596d3d3d88dd0a5bc91439d
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Tue Jul 21 11:58:04 2009 +0900
+
+ OneNAND: Remove unused read_spareram
+
+ Remove unused read_spareram and add unlock_all as kernel does
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 0d042037b3cf8693ea0f793d0c292430bfc5a95c
+Author: Eric Millbrandt <emillbrandt@coldhaus.com>
+Date: Tue Aug 25 10:30:26 2009 -0500
+
+ galaxy5200: Cleanup typo and trailing whitespace
+
+ Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
+
+commit f6a309080b2da9e509b5ee8d091dca5e175415b7
+Author: TsiChung Liew <tsicliew@gmail.com>
+Date: Wed Jul 22 18:42:45 2009 +0000
+
+ ColdFire: Fix compile warning messages
+
+ Change %08lX to %08X in board.c. Remove unused variable
+ 'oscillator' in mcf5227x/cpu_init.c and 'scm2' in
+ mcf532x/cpu_init.c. Provide argument type cast in
+ drivers/dma/MCD_dmaApi.c.
+
+ Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
+
+commit 88c811b153771a3d1bfe958297c69722efb278e9
+Author: TsiChung Liew <tsicliew@gmail.com>
+Date: Wed Jul 22 16:32:39 2009 +0000
+
+ ColdFire: Fix missing _IO_BASE which caused compile error
+
+ The compile error was caused by a recent patch. Affected platforms -
+ M5253DEMO.h, M5253EVBE.h, and M54455EVB.h. Adding the _IO_BASE
+ automatically defined to 0 in asm-m68k/io.h if it isn't set in
+ platform configuration file.
+
+ Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
+
+commit 3a7b2c21fb08b022e3e624cd071002b4aaed1606
+Author: Niklaus Giger <niklaus.giger@member.fsf.org>
+Date: Wed Jul 22 17:13:24 2009 +0200
+
+ Support up to 7 banks for ids as specified in JEDEC JEP106Z
+
+ see http://www.jedec.org/download/search/jep106Z.pdf
+ Add some second source legacy flash chips 256x8.
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0d071cdd782e917b43e04869843df31670231ffd
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Mon Aug 24 14:32:26 2009 -0500
+
+ net: tsec - handle user interrupt while waiting for PHY auto negotiation to complete
+
+ if you don't have firmware installed for the PHY to come to life, this
+ wait can be painful - let's give the option to avoid it if we want.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 4fccb818e7ee1190602e79aa5729a23bc349bf0c
+Author: Robin Getz <rgetz@blackfin.uclinux.org>
+Date: Thu Aug 20 10:50:20 2009 -0400
+
+ Add Transfer Size Option to tftp
+
+ Optionally add RFC 2349 "Transfer Size Option", so we can minimize the
+ time spent sending data over the UART (now print a single line during a
+ tftp transfer).
+
+ - If turned on (CONFIG_TFTP_TSIZE), U-Boot asks for the size of the file.
+ - if receives the file size, a single line (50 chars) are printed.
+ one hash mark == 2% of the file downloaded.
+ - if it doesn't receive the file size (the server doesn't support RFC
+ 2349, prints standard hash marks (one mark for each UDP frame).
+
+ Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 488feef85229c08cd3aa1fa183bc8f483d2ae832
+Author: Robin Getz <rgetz@blackfin.uclinux.org>
+Date: Mon Aug 24 10:33:39 2009 -0400
+
+ Add debug message for Blackfin Ethernet Rx function.
+
+ Add a simple print for the Blackfin's Ethernet Rx function,
+ so we can debug incomming Ethernet functions easier.
+
+ Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit b1c0eaac110bc919e5b4e88821348e714493f266
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Tue Aug 25 13:09:37 2009 -0700
+
+ Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
+
+ All in-tree boards that use this controller have CONFIG_NET_MULTI added
+ Also:
+ - changed CONFIG_DRIVER_CS8900 to CONFIG_CS8900
+ - changed CS8900_BASE to CONFIG_CS8900_BASE
+ - changed CS8900_BUS?? to CONFIG_CS8900_BUS??
+ - cleaned up line lengths
+ - modified VCMA9 command function that accesses the device
+ - removed MAC address initialization from lib_arm/board.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+ Tested-by: Wolfgang Denk <wd@denx.de>
+ Acked-by: Wolfgang Denk <wd@denx.de>
+
+commit d47628a6ecf80cd4584a50b6c795b90c985a48e5
+Author: Alessandro Rubini <rubini-list@gnudd.com>
+Date: Fri Aug 7 13:59:26 2009 +0200
+
+ arm nomadik: activate defrag choose 4k transfer block size
+
+ This chooses 4kB data size for both TFTP and NFS, as an example
+ about how to use support for IP fragments.
+
+ Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit bd931ca61c84039241d438ade4a9755ae0e5372f
+Author: Alessandro Rubini <rubini-list@gnudd.com>
+Date: Fri Aug 7 13:59:16 2009 +0200
+
+ nfs: accept CONFIG_NFS_READ_SIZE from config file
+
+ To take advantage of defragmented packets, the config file
+ can define CONFIG_NFS_READ_SIZE to override the 1kB default.
+ No support is there for an environment variable by now.
+
+ Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 89ba81d1079a07b8430a98c1746c6d411312eb0d
+Author: Alessandro Rubini <rubini-list@gnudd.com>
+Date: Fri Aug 7 13:59:06 2009 +0200
+
+ tftp: get the tftp block size from config file and from the environment
+
+ Increasing the block size is useful if CONFIG_IP_DEFRAG is
+ used. Howerver, the last fragments in a burst may overflow the
+ receiving ethernet, so the default is left at 1468, with thre new
+ CONFIG_TFTP_BLOCKSIZE for config files. Further, "tftpblocksize"
+ can be set in the environment.
+
+ Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 5cfaa4e54d0eb8232fa1cf092d955fdaed5b673d
+Author: Alessandro Rubini <rubini-list@gnudd.com>
+Date: Fri Aug 7 13:58:56 2009 +0200
+
+ net: defragment IP packets
+
+ The defragmenting code is enabled by CONFIG_IP_DEFRAG; the code is
+ useful for TFTP and NFS transfers. The user can specify the maximum
+ defragmented payload as CONFIG_NET_MAXDEFRAG (default 16k).
+ Since NFS has a bigger per-packet overhead than TFTP, the static
+ reassembly buffer can hold CONFIG_NET_MAXDEFRAG + the NFS overhead.
+
+ The packet buffer is used as an array of "hole" structures, acting as
+ a double-linked list. Each new fragment can split a hole in two,
+ reduce a hole or fill a hole. No support is there for a fragment
+ overlapping two diffrent holes (i.e., thre new fragment is across an
+ already-received fragment).
+
+ Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 68e74567cf317318df52dbcb2ac170ffc5e7758a
+Author: Feng Kan <fkan@amcc.com>
+Date: Fri Aug 21 10:59:42 2009 -0700
+
+ ppc4xx: Fix ECC Correction bug with SMC ordering for NDFC driver
+
+ Fix ECC Correction bug where the byte offset location were double
+ flipped causing correction routine to toggle the wrong byte location
+ in the ECC segment. The ndfc_calculate_ecc routine change the order
+ of getting the ECC code.
+ /* The NDFC uses Smart Media (SMC) bytes order */
+ ecc_code[0] = p[2];
+ ecc_code[1] = p[1];
+ ecc_code[2] = p[3];
+ But in the Correction algorithm when calculating the byte offset
+ location, the s1 is used as the upper part of the address. Which
+ again reverse the order making the final byte offset address
+ location incorrect.
+ byteoffs = (s1 << 0) & 0x80;
+ .
+ .
+ byteoffs |= (s0 >> 4) & 0x08;
+ The order is change to read it in straight and let the correction
+ function to revert it to SMC order.
+
+ Signed-off-by: Feng Kan <fkan@amcc.com>
+ Acked-by: Victor Gallardo <vgallardo@amcc.com>
+ Acked-by: Prodyut Hazarika <phazarika@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 307ecb6db04eebdc06b8c87d48bf48d3cbd5e9d7
+Author: Eric Millbrandt <emillbrandt@coldhaus.com>
+Date: Thu Aug 13 08:32:37 2009 -0500
+
+ Add support for USB on PSC3 for the mpc5200
+
+ Support USB on PSC3 on the mpc5200. Before this patch, enabling USB support
+ would reconfigure PSC4 and PSC5 to USB. The mpc5200 does not support USB
+ enabled on both the standard USB port and PSC3. This patch masks the
+ appropriate bits when enabling USB.
+
+ Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+ Acked-by: Remy Bohmer <linux@bohmer.net>
+
+commit 6b8548b0f7068379ad1efa4fa28725f361b2d3cd
+Author: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+Date: Thu Aug 13 19:12:44 2009 +0200
+
+ Add driver for the ST M41T94 SPI RTC
+
+ This RTC is used in some Calao boards. The driver code is taken from
+ the linux rtc-m41t94 driver
+
+ Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+
+commit 885fc78c28fbe773bcb4edc9dd0fdac05ebb5b38
+Author: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+Date: Thu Aug 13 15:31:12 2009 +0200
+
+ Switch from per-driver to common definition of bin2bcd and bcd2bin
+
+ Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit e84aba135ed7145299304ef550e92f08b2c99d7a
+Author: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+Date: Thu Aug 13 15:31:11 2009 +0200
+
+ Replace BCD2BIN and BIN2BCD macros with inline functions
+
+ In the process, also remove backward-compatiblity macros BIN_TO_BCD and
+ BCD_TO_BIN and update the sole board using them to use the new bin2bcd
+ and bcd2bin instead
+
+ Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+ Acked-by: Detlev Zundel <dzu@denx.de>
+
+commit 5b53b29bc2e82b80b669f1d2402068c60d7fecd0
+Author: Eric Millbrandt <emillbrandt@coldhaus.com>
+Date: Thu Aug 13 10:14:21 2009 -0500
+
+ Add support for the galaxy5200
+
+ Add support for the DEKA Research and Development galaxy5200 board
+
+ The galaxy5200 is an Freescale mpc5200 based embedded industrial
+ control board.
+
+ Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
+
+commit 0a9e4e772123fe3e2bb499d7d2160c4cfd8a3a8d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Jul 24 16:34:32 2009 -0400
+
+ unify {CONFIG_,}ENV_IS_EMBEDDED
+
+ Some boards have fallen out of sync by defining CONFIG_ENV_IS_EMBEDDED
+ manually. While it is useful to have this available to the build system,
+ let's do it automatically rather than forcing people to opt into it.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 02c9aa1d41f73fdcf8383a36cc0cbbfaf952855d
+Author: Robin Getz <rgetz@blackfin.uclinux.org>
+Date: Mon Jul 27 00:07:59 2009 -0400
+
+ Add md5sum and sha1 commands...
+
+ Now that we have sha1 and md5 in lib_generic, allow people to use
+ them on the command line, for checking downloaded files.
+
+ Signed-off-by: Robin Getz <rgetz@analog.com>
+
+commit 30fc5cd3116cb112d0aab7e6d7c8eef1b67ed075
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Aug 25 12:22:38 2009 +0200
+
+ include/s3c24x0.h: fix S3C24X0_SPI_CHANNEL declaration
+
+ The SPI controller on the S3C24X0 has 8 bit registers, not 32 bit.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e637385e69f63bc73b9dfd2ddd8d0f383790ca28
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 20 19:17:59 2009 -0400
+
+ Blackfin: fix typos in gpio comments
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c2fbcb6ae86c10621a386c13be57eaa766221ed5
+Author: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
+Date: Tue Aug 18 04:49:57 2009 -0400
+
+ Blackfin: cm-bf527/cm-bf537: increase flash sectors
+
+ Newer revisions of these boards have slightly larger flashes, so increase
+ the configured number of sectors so that U-Boot works on all revisions.
+
+ Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit a794f59a75bf9fd4a44f1ad2349cae903c42b89c
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Aug 23 14:14:52 2009 +0200
+
+ sh/rsk7203: add missing include net.h
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6ac9f47977a9fc1876979871eeb14f26ba1bdbe6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Aug 23 02:47:59 2009 -0400
+
+ start a linker script helper file
+
+ Start a common header file for common linker script code (such as
+ workarounds for older linkers) rather than doing this in the build system.
+
+ As fallout, we no longer execute the linker every time config.mk is
+ included by a build file (which can easily be 70+ times), but rather only
+ execute it once.
+
+ This also fixes a bug in the major version checking by creating a macro to
+ easily compare versions and keep people from making the same common
+ mistake (forgetting to check major and minor together).
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2ed0869d30602eb660569eababb8fedff36bd23a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Aug 22 19:50:22 2009 -0400
+
+ Blackfin: use common code to preprocess linker script
+
+ Now that the common code preprocesses the linker script, the Blackfin code
+ no longer needs to do it.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 4d3758c835c7e96da2a291e7fb5acfc19bc06e8e
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Aug 22 19:48:56 2009 -0400
+
+ .gitignore: ignore generated u-boot.lds
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 79b91de958511840d2a7491be92d435b7ef43f17
+Author: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+Date: Sat Aug 22 14:21:53 2009 +0200
+
+ include/mmc.h: Fix typo in IS_SD() macro
+
+ Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+
+commit 963f2f611741f8d9c38bd7caf20ae8c95cab7b3f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Aug 22 23:27:26 2009 +0200
+
+ Prepare 2009.08-rc3
+
+ Update CHANGELOG, minor Coding Style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5b2da6a309266f21cbb68f06fcfdf9ba141022e7
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Aug 21 06:52:25 2009 +1000
+
+ qemu-mips: Fix Qemu website
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+ Signed-off-by: Michal Simek <michal.simek@petalogix.com>
+ Acked-by: Shinya Kuribayashi <skuribay@pobox.com>
+
+commit 79f516bccc3cff5a5cd4b3dffb7d254e746fdbde
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Aug 21 16:34:38 2009 -0500
+
+ mpc83xx: accommodate larger kernel sizes by default
+
+ linux mpc83xx_defconfig kernels are getting bigger, accommodate for
+ their growth by adjusting default load and fdt addresses.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8eceeb7fd656d6d071c0a8b615e178aca5775fff
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Aug 21 16:33:15 2009 -0500
+
+ mpc83xx: mpc8377erdb - change DDR settings to those from latest bsp
+
+ when using Linus' 83xx_defconfig, the mpc8377rdb would hang at boot
+ at either:
+
+ NET: Registered protocol family 16
+
+ or the
+
+ io scheduler cfq registered
+
+ message. Fixing up these DDR settings appears to fix the problem.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 27c5248dd4c9ba4a36899689595956c5e59e349a
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Aug 21 16:31:20 2009 -0500
+
+ mpc83xx: tqm8349 - remove pci & flash window conflict
+
+ commit 9993e196da707a0a1cd4584f1fcef12382c1c144 "mpc83xx: convert all
+ remaining boards over to 83XX_GENERIC_PCI" remapped pci windows on
+ tqm834x to make it more consistent with the other 83xx boards. During
+ that time however, the author failed to realize that FLASH_BASE was
+ occupying the same range as what PCI1_MEM_BASE was being assigned.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+ Tested-by: Wolfgang Denk <wd@denx.de>
+
+commit 6d2c26ac831f033b0025cfb256365a047f8dd115
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Aug 21 16:30:30 2009 -0500
+
+ mpc83xx: add missing CSCONFIG_ODT_WR_CFG for 832x CPUs
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 193b4cb3f641ed0fd9bb79b8fa4671882c50ffdb
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Fri Aug 21 16:27:05 2009 -0500
+
+ mpc83xx: mpc8349 - delete unused SYS_MID_FLASH_JUMP
+
+ This was introduced with the MPC8349EMDS board, and then copied to
+ a couple other boards by nature of being the reference implementation.
+
+ u-boot$git grep CONFIG_SYS_MID_FLASH_JUMP
+ include/configs/MPC8349EMDS.h:#define CONFIG_SYS_MID_FLASH_JUMP 0x7F000000
+ include/configs/sbc8349.h:#define CONFIG_SYS_MID_FLASH_JUMP 0x7F000000
+ include/configs/vme8349.h:#define CONFIG_SYS_MID_FLASH_JUMP 0x7F000000
+ u-boot$
+
+ It currently isn't used, so delete it before it spreads further.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit c0d660fbbede322648ec79d3e39389e48f5fab24
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Fri Aug 21 16:21:58 2009 -0500
+
+ mpc83xx: sbc8349 - make enabling PCI more user friendly
+
+ Prior to this commit, to enable PCI, you had to go manually
+ edit the board config header, which isn't really user friendly.
+ This adds the typical PCI make targets to the toplevel Makefile
+ in accordance with what is being done with other boards.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit a3c5057a6c05b4c7235a270486220e4511366133
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Aug 7 23:37:54 2009 +0200
+
+ eeprom_m95xxx: remove unused variable i
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 8cf19b9fec92d8aa22b2fe4b4e6976743b1daa51
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Fri Jul 17 15:02:42 2009 +0400
+
+ jffs2: some fixes to summary support
+
+ This patch fixes some issues with JFFS2 summary support in U-Boot.
+ 1/ Summary support made compilation configurable (as summary support
+ considered expiremental even in Linux).
+ 2/ Summary code can do unaligned 16-bit and 32-bit memory accesses.
+ We need to get data byte by byte to exclude data aborts.
+ 3/ Make summary scan in two passes so we can safely fall back to full
+ scan if we found unsupported entry in the summary.
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 11906936e168d12d684bb3d2930a62693ba3d84e
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Mon Aug 10 18:55:54 2009 +0530
+
+ arm: rd6281a: Fixed NAND specific warning
+
+ It is recommended to define the macro CONFIG_SYS_64BIT_VSPRINTF
+ for NAND specific warning removal, same is done in this patch
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+commit b5ffb193330113d2e00489d96bf8ec1f541ed4e1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Aug 13 00:37:16 2009 +0200
+
+ TRAB: make independent of specific libgcc helper routines
+
+ The TRAB board references local libgcc helper routines
+ (lib_arm/div0.o and lib_arm/_umodsi3.o) which cause build problems
+ when we try to use the normal, compiler provided libgcc instead.
+ Removing these references allows to build both with and without the
+ local libgcc helper routines.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 1aada9cd643567d351667138851e9231ccfa245a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Aug 17 14:00:53 2009 +0200
+
+ Fix all linker scripts for older binutils versions (pre-2.16)
+
+ Commit f62fb99941c6 fixed handling of all rodata sections by using a
+ wildcard combined with calls to ld's builtin functions SORT_BY_ALIGNMENT()
+ and SORT_BY_NAME(). Unfortunately these functions were only
+ introduced with biunutils version 2.16, so the modification broke
+ building with all tool chains using older binutils.
+
+ This patch makes it work again. This is done by omitting the use of
+ these functions for such old tool chains. This will result in
+ slightly larger target binaries, as the rodata sections are no longer
+ in optimal order alignment-wise which reauls in unused gaps, but the
+ effect was found to be insignificant - especially compared to the fact
+ that you cannot build U-Boot at all in the current state.
+
+ As ld seems to have no support for conditionals we run the linker
+ script through the C preprocessor which can be easily used to remove
+ the unwanted function calls.
+
+ Note that the C preprocessor must be run with the "-ansi" (or a
+ "-std=") option to make sure all the system-specific predefined
+ macros outside the reserved namespace are suppressed. Otherise, cpp
+ might for example substitute "powerpc" to "1", thus corrupting for
+ example "OUTPUT_ARCH(powerpc)" etc.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Mike Frysinger <vapier@gentoo.org>
+
+commit f772acf8a584067033eff1e231fcd1fb3a00d3d9
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Aug 17 13:17:29 2009 +0200
+
+ ARM: compiler options cleanup - improve tool chain support
+
+ For some time there have been repeated reports about build problems
+ with some ARM (cross) tool chains. Especially issues about
+ (in)compatibility with the tool chain provided runtime support
+ library libgcc.a caused to add and support a private implementation
+ of such runtime support code in U-Boot. A closer look at the code
+ indicated that some of these issues are actually home-made. This
+ patch attempts to clean up some of the most obvious problems and make
+ building of U-Boot with different tool chains easier:
+
+ - Even though all ARM systems basicy used the same compiler options
+ to select a specific ABI from the tool chain, the code for this was
+ distributed over all cpu/*/config.mk files. We move this one level
+ up into lib_arm/config.mk instead.
+
+ - So far, we only checked if "-mapcs-32" was supported by the tool
+ chain; if yes, this was used, if not, "-mabi=apcs-gnu" was
+ selected, no matter if the tool chain actually understood this
+ option. There was no support for EABI conformant tool chains.
+ This patch implements the following logic:
+
+ 1) If the tool chain supports
+ "-mabi=aapcs-linux -mno-thumb-interwork"
+ we use these options (EABI conformant tool chain).
+ 2) Otherwise, we check first if
+ "-mapcs-32"
+ is supported, and then check for
+ "-mabi=apcs-gnu"
+ If one test succeeds, we use the first found option.
+ 3) In case 2), we also test if "-mno-thumb-interwork", and use
+ this if the test succeeds. [For "-mabi=aapcs-linux" we set
+ "-mno-thumb-interwork" mandatorily.]
+
+ This way we use a similar logic for the compile options as the
+ Linux kernel does.
+
+ - Some EABI conformant tool chains cause external references to
+ utility functions like raise(); such functions are provided in the
+ new file lib_arm/eabi_compat.c
+
+ Note that lib_arm/config.mk gets parsed several times, so we must
+ make sure to add eabi_compat.o only once to the linker list.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Cc: Dirk Behme <dirk.behme@googlemail.com>
+ Cc: Magnus Lilja <lilja.magnus@gmail.com>
+ Cc: Tom Rix <Tom.Rix@windriver.com>
+ Cc: Prafulla Wadaskar <prafulla@marvell.com>
+ Acked-by: Sergey Kubushyn <ksi@koi8.net>
+ Tested-by: Magnus Lilja <lilja.magnus@gmail.com>
+ Tested-by: Andrzej Wolski <awolski@poczta.fm>
+ Tested-by: Gaye Abdoulaye Walsimou <walsimou@walsimou.com>
+ Tested-by: Tom Rix <Tom.Rix@windriver.com>
+ Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 269610f6ba2e4a7bc27d2e53d43160614016964f
+Author: Mingkai Hu <Mingkai.hu@freescale.com>
+Date: Thu Jul 30 17:56:51 2009 +0800
+
+ NAND boot: fix nand_load overlap issue
+
+ The code copy data from NAND flash block by block, so when
+ the data length isn't a whole-number multiple of the block
+ size, it will overlap the rest space.
+
+ Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 1fc1d9aed08f2b3366d634fda6712a710b2cff9a
+Author: Giulio Benetti <giulio.benetti@micronovasrl.com>
+Date: Fri Jul 31 17:30:34 2009 -0500
+
+ add WATCHDOG_RESET() on nand write and read
+
+ Signed-off-by: giulio.benetti@micronovasrl.com
+ Acked-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit b1e849f2201bbbf3ca81fde164f154f9caf7f0e9
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Feb 4 15:14:05 2009 -0600
+
+ tsec: Wait for auto-negotiation to complete without link
+
+ Previously, waiting for auto-negotiation would only occur if a valid
+ link had been detected. Problems arose when attempting to use a
+ tsec immediately after bootup but before link was achieved, eg:
+ => dhcp
+ Auto-neg error, defaulting to 10BT/HD
+ eTSEC1: No link.
+ Auto-neg error, defaulting to 10BT/HD
+ eTSEC2: No link.
+ =>
+
+ With this patch applied the same operation as above resulted in:
+ => dhcp
+ Waiting for PHY auto negotiation to complete. done
+ Enet starting in 1000BT/FD
+ Speed: 1000, full duplex
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 477fa6378fbd3e47a5e2e83d0dd3970d5b1c8371
+Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
+Date: Thu Aug 20 10:14:11 2009 +0200
+
+ arm: kirkwood: See to it that sent data is 8-byte aligned
+
+ U-boot might use non-8-byte-aligned addresses for sending data, which
+ the kwgbe_send doesn't accept (bootp does this for me). This patch
+ copies the data to be sent to a malloced temporary buffer if it is
+ non-aligned.
+
+ Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit cad713bf7548b9e90433dac8270165402a6c9cc3
+Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
+Date: Thu Aug 20 10:13:06 2009 +0200
+
+ Wait for the link to come up on kirkwood network init
+
+ This patch makes the device wait for up to 5 seconds for the link to
+ come up, similar to what many of the other network drivers do. This
+ avoids confusing situations where, e.g., a tftp fails when initiated
+ early after U-boot has started (before the link has come up).
+
+ Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit bb1ca3b27f7fba8c73cb10279a6a8b8b69a308ff
+Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
+Date: Thu Aug 20 10:12:28 2009 +0200
+
+ arm:kirkwood Define kirkwood phy address magic number
+
+ Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit f81ecb5d3300bf92d17302d3712f30585c182da9
+Author: Timur Tabi <timur@freescale.com>
+Date: Mon Aug 17 15:55:38 2009 -0500
+
+ e1000: fix PCI memory addressing
+
+ The Intel E1000 driver was making assumptions about the relationship between
+ some virtual, physical, and PCI addresses.
+
+ Also fix some bad usage of the DEBUGOUT macro
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit b644006e1a7baa227aedc606ecdf0bb5eeb24cab
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Wed Aug 12 16:42:48 2009 +0400
+
+ jffs2: clean the cache in case of malloc fails in build_lists
+
+ We should call jffs2_clean_cache() if we return from jffs2_build_lists()
+ with an error to prevent usage of incomplete lists. Also we should
+ free() a local buffer to prevent memory leaks.
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 7ff66bb0be80cadd681be22a72e5eb02ee14c878
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Aug 12 10:17:03 2009 +0200
+
+ ppc: trigger WDT before starting Linux
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 918319c705d8a3d6251919a660baef32ff3a829a
+Author: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+Date: Wed Jul 22 18:30:03 2009 +0200
+
+ Update the mtd driver name in bootargs for at91-based boards
+
+ The name of the atmel nand driver in the kernel changed from at91_nand
+ to atmel_nand back in June 2008, but the at91-based boards config files
+ still refer to at91_nand. This patch updates them with the new name
+
+ Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+
+commit 8fa656aa5289815d942ebdc26182ccb9f2b9c86f
+Author: Ben Goska <goskab@onid.oregonstate.edu>
+Date: Fri Aug 14 10:03:36 2009 -0700
+
+ omap3: Fixed a problem with hwecc
+
+ In commit 187af954cf7958c24efcf0fd62289bbdb4f1f24e there
+ was a typo that offset all the ecc registers by 4 bytes, fixed that.
+
+ Signed-off-by: Ben Goska <goskab@onid.oregonstate.edu>
+ Acked-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 514bab6609acd1a2a19fdd75c2f6255178db7c96
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Aug 17 16:57:53 2009 +0200
+
+ ppc4xx: Fix "chip_config" command for AMCC Arches
+
+ This patch fixes the "chip_config" command for I2C bootstrap EEPROM
+ configuration. First it changes the I2C bootstrap EEPROM address to
+ 0x54 as this is used on Arches (instead of 0x52 on Canyonlands/
+ Glacier). Additionally, the NAND bootstrap settings are removed
+ for Arches since Arches doesn't support NAND-booting.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4af34177b657e91263919a307fd0b0865a299e52
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Aug 16 23:40:13 2009 +0200
+
+ Monahans: avoid floating point calculations
+
+ Current code for the Monahans CPU defined OSCR_CLK_FREQ as 3.250 (MHz)
+ which caused floating point operations to be used. This resulted in
+ unresolved references to some FP related libgcc functions when using
+ U-Boot's private libgcc functions.
+
+ Change the code to use fixed point math only.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e393e2e9bc5cd3d5484e193d1380e7cd7587ab5c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 14 16:43:22 2009 -0500
+
+ 85xx: Fix addrmap to include memory
+
+ When we init the addrmap based on the TLB we will not end up getting
+ the TLB that covers memory if we are using SPD. The reason is we
+ haven't relocated at the point that we setup the memory TLB and thus it
+ will not get setup in the addrmap.
+
+ Instead we can just walk over the TLB array after we've relocated and
+ see all the TLBs that have been set and use that information to populate
+ the initial addrmap. By doing this we insure that we get the TLB
+ entries that cover memory.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 7dedefdf749ff02c1086f7ddb8cb83a77b00d030
+Author: John Schmoller <jschmoller@xes-inc.com>
+Date: Wed Aug 12 10:55:47 2009 -0500
+
+ flash: Fix CFI buffer size bug
+
+ Fix bug introduced by 9c048b523413ae5f3ff34e00cf57569c3368ab51.
+
+ The cfi_flash.c driver cast the flash buffer size to a uchar in
+ flash_write_cfibuffer(). On some flash parts, (tested on Numonyx
+ part PC32F512M29EWH), the buffer size is 1KB. Remove the cast to
+ uchar to enable buffer sizes to be larger.
+
+ Signed-off-by: John Schmoller <jschmoller@xes-inc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f6e3a1fa92f61083885178101e973c86b419a6f7
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 13 00:32:14 2009 -0400
+
+ trab: rename spi_init()
+
+ The local board-specific spi_init() function conflicts with the common SPI
+ layer, so rename it to something board-specific.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 253cb831f5861358a7fa673305cdf7ded1096f44
+Author: Giuseppe CONDORELLI <giuseppe.condorelli@st.com>
+Date: Wed Jul 29 06:05:20 2009 -0400
+
+ zlib: add watchdog reset call
+
+ This patch adds watchdog reset call to allow its invokation during decompression
+ phase. This control was present on old zlib version and here it is
+ backported for those relevant routines. This patch is sent as a zlib separate
+ one beacuse it was not tested due to specific board lack.
+ zlib patches will be unified just in one when this will be validated through
+ tests.
+
+ Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com>
+
+commit dce3d797102b6618e8bdd4a09cfd35969f165d86
+Author: Giuseppe CONDORELLI <giuseppe.condorelli@st.com>
+Date: Wed Jul 29 08:05:08 2009 -0400
+
+ zlib: updated to v.1.2.3
+
+ This patch updates zlib to the latest stable version.
+ Only relevant zlib parts were ported to u-boot tree, as already did for the
+ current zlib (0.95). New zlib guarantees a faster inflate performances
+ other then others improvements as explained at www.zlib.net.
+ It also includes Alessandro Rubini's patches to allow 0 as destination pointer
+ and to call watchdog reset if required by architecture.
+
+ Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com>
+ Reviewed-by: Angelo Castello <angelo.castello@st.com>
+ Reviewed-by: Alessandro Rubini <rubini-list@gnudd.com>
+
+commit 3426d65daab6af483b177ed502038f52ed2e5aef
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Aug 11 10:37:58 2009 +0200
+
+ dtt, lm81: move unneccessary printf into a debug printf
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 54e399f110bbaa24e662e6dd9e88ddb86989d668
+Author: Mark Jackson <mpfj-list@mimc.co.uk>
+Date: Tue Aug 11 11:33:47 2009 +0100
+
+ MIMC200: reduce LCD pixclock
+
+ The initial pixclock for the MIMC200 board is wrong (and causes
+ screen corruption due to DMA underruns).
+
+ This patch simply reduces the pixel clock to fix the problem.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+
+commit 1443cd7e54d6893ab7cc51d93fe7759cdaa8b31f
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Wed Jul 1 14:04:05 2009 -0400
+
+ UEC FIXED PHY: Determine fixed-phy port using UEC interface name.
+
+ Fixed a misunderstanding in the original implementation, 'devnum' that
+ was used in the cpu/ppc4xx/4xx_enet.c implementation was NOT the
+ PHY's SMI address, rather it was the number of the MAC interface on
+ the CPU. The equivalent of this for uec_phy will be the UEC number
+ stored in mii_info->dev->name. Usage example is updated for uec.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 1a9519373b977ef3f7c9563ad3acb6c6f2424657
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Wed Jul 1 14:03:15 2009 -0400
+
+ Assigned a static SMI address to all UECs TBIPA address.
+
+ It is set to 0x1F by default and can be overwritten on the board
+ header file by defining CONFIG_UTBIPAR_INIT_TBIPA. This allows
+ the CPU to simply "reserve" one SMI address instead of using
+ a different one for each UEC.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 9fd38a01cbc0ce4a8db41f72677103ed04b23db5
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Mon Aug 10 19:43:06 2009 +0530
+
+ net: kirkwood: updates: used eth_setenv_enetaddr api
+
+ eth_setenv_enetaddr is avaible by upper layer
+ using this saves 204 bytes on total image size
+
+ used Local OUI instead of Marvell OUI for
+ random MAC address generation logic
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit ecbd2078a1f56c85b6c56afaaed862bf92ccd3f3
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date: Tue Aug 11 03:48:05 2009 +0800
+
+ Fix E1000 build warning on AP1000 board
+
+ Fix E1000 build warning on AP1000 board
+ Fix the build warning on AP1000 board:
+ e1000.c:131: warning: 'e1000_read_eeprom' used but never defined
+ e1000.c:2012: warning: 'e1000_set_phy_mode' defined but not used
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit b3af1d698b031e721bacaee8715d79daaf823de6
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Mon Aug 10 12:24:40 2009 -0400
+
+ ARM: Davinci DM355: Enabling DM9000 on DM355 EVM
+
+ Due to recent changes to the NET support on U-boot, DM9000
+ is no longer detected on the DM355 EVM.
+ This minor update enables DM9000 on the DM355 EVM.
+ Tested on the DM355 EVM
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 08c2df33f1cd5935938486e968696f94ad406313
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Mon Aug 10 19:23:19 2009 +0530
+
+ net: phy: bugfixes: mv88E61xx compiler warnings fixed
+
+ 1. mv88E61xx driver compiler warnings fixed
+ 2. idstr if-else statements changed to switch() construct
+ and added default case too.
+ This fixed idstr may be uninitialized warning
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 750326e5d540885e3ec36bda9464b8269249f6ce
+Author: Po-Yu Chuang <ratbert@faraday-tech.com>
+Date: Mon Aug 10 11:00:00 2009 +0800
+
+ arm: A320: driver for FTMAC100 ethernet controller
+
+ This patch adds an FTMAC100 ethernet driver for Faraday A320 evaluation board.
+
+ Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit f90dc43fd67eea71124b999a7d5e617d0d86795b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Aug 10 16:40:55 2009 -0500
+
+ 85xx: Removed BEDBUG support from FSL 85xx boards
+
+ For some reason the MPC8544 enabled BEDBUG if PCI was enabled and that
+ got copied int the MPC8536, MPC8572 and P2020 DS boards. The BEDBUG
+ support has never been made to work completely on e500/85xx so we
+ just disable it to save space and match the other FSL 85xx boards.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit eb1a4d0a471505c169bef19a73a60f8641f0b875
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Aug 10 10:39:12 2009 +0200
+
+ Prepare 2009.08-rc2
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 53cc18c71b2b920cca171874c6663e274fa80556
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Aug 10 10:38:34 2009 +0200
+
+ Minor coding style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d371708a1beda0f529756e614af785b30461379e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Aug 10 09:59:10 2009 +0200
+
+ net/tftp.c: fix warning: pointer targets differ in signedness
+
+ tftp.c:294: warning: pointer targets in passing argument 1 of 'strlen'
+ differ in signedness
+
+ This was only visible for the utx8245 board which seems to have DEBUG
+ enabled.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3ed9e943fdfe51174b23989d48563b8c1b7d2ea8
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sat Aug 8 16:06:47 2009 +0200
+
+ ARM Cortex A8: Remove bogus config.mk entries
+
+ Remove bogus config.mk entry, fix newline and remove redundant
+ omap3/config.mk
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit cd3dcba1422d3441503251fbc69cf2437c440781
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sat Aug 8 12:46:09 2009 +0200
+
+ OMAP3: Fix missing GPMC_CONFIG_CS0_BASE
+
+ Applying two indepenent OMAP3 patches resulted in missing
+ GPMC_CONFIG_CS0_BASE. Patch "omap3: embedd gpmc_cs into gpmc
+ config struct" removes GPMC_CONFIG_CS0_BASE, independent patch
+ "omap3: bug fix for NOR boot support" introduces it's usage.
+ Re-introduce GPMC_CONFIG_CS0_BASE.
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit ba3dbaf281130029ecb970a922551902c1d80b50
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Mon Jun 8 04:12:49 2009 +0400
+
+ mxc-mmc: sdhc host driver for MX2 and MX3 proccessor
+
+ This is a port of Linux driver for SDHC host controller hardware
+ found on Freescale's MX2 and MX3 processors. Uses new generic MMC
+ framework (CONFIG_GENERIC_MMC) and it looks like there are some
+ problems with a framework (at least on LE cpus). Some of these
+ problems are addressed in the following patches.
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 642d7b63c343633dcafc4e23a20e32604a05ff13
+Author: Alessandro Rubini <rubini-list@gnudd.com>
+Date: Fri Aug 7 12:35:47 2009 +0200
+
+ kirkwood/gpio.h: remove duplicate definition
+
+ Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
+
+commit 3ac374c0f0b7d856f1a43317a286f2079106bd6a
+Author: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+Date: Fri Aug 7 12:37:36 2009 +0200
+
+ Add driver for the ST M95xxx SPI EEPROM
+
+ This chip is used in a number of boards manufactured by Calao-Systems
+ which should be supported soon. This driver provides the necessary
+ spi_read and spi_write functions necessary to communicate with the chip.
+
+ Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
+
+commit 30951960bae9a2c33e324a7165962a082e913f9e
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Fri Aug 7 22:27:32 2009 +0530
+
+ arm: Sheevaplug: Fixed NAND specific warning
+
+ It is recommended to define the macro CONFIG_SYS_64BIT_VSPRINTF
+ for NAND specific warning removal, same is done in this patch
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+commit 317734966e763fdee183898c0ed940c9bada2541
+Author: Josh Boyer <jwboyer@linux.vnet.ibm.com>
+Date: Fri Aug 7 13:53:20 2009 -0400
+
+ Dual-license IBM code contributions
+
+ It was brought to our attention that U-Boot contains code derived from the
+ IBM OpenBIOS source code originally provided with some of the older PowerPC
+ 4xx development boards. As a result, the original license of this code has
+ been carried in the various files for a number of years in the U-Boot project.
+
+ IBM is dual-licensing the IBM code contributions already present in U-Boot
+ under either the terms of the GNU General Public License version 2, or the
+ original code license already present.
+
+ Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
+
+commit cfd700be9f5ed289fd57a9bd61e266319badcb0d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Aug 5 09:03:54 2009 -0500
+
+ fdt: Fix fdt_pci_dma_ranges handling of 64-bit ranges
+
+ If the size of a region equal to 4G it can't be represnted in a 32-bit
+ BAR so we should have marked that case as MEM64.
+
+ Additionally bump the number of inbound windows up to 4 to handle the
+ fact that Freescale PPCs that have an implicit window for CCSRBAR.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 59b4d7471c42e955bd9846892a0cc7478171778d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Aug 6 21:29:59 2009 +0200
+
+ ARM EABI: add new helper functions resp. function names
+
+ The ARM EABI defines new names for GCC helper functions,
+ and GCC seems to need some new functions as well.
+
+ This patch is a minimal-invasive approach to fix problems with EABI
+ conformant tool chains (to be used with "USE_PRIVATE_LIBGCC=yes").
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Tested-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 197324d7d998a791e5137b8176981b4af25220ae
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Aug 5 16:18:44 2009 -0500
+
+ hush: Fix bogus free() call
+
+ An off-by-one error in hush.c resulted in an unintentional free() call
+ every time a command was executed
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit ff27650bb255e2275a212357b78c3b77cbf1d2e9
+Author: Detlev Zundel <dzu@denx.de>
+Date: Wed Aug 5 18:37:45 2009 +0200
+
+ digsy_mtc: Update default environment
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 0b40bd439a33bde9e3cccf1acb5744225d0c6103
+Author: Detlev Zundel <dzu@denx.de>
+Date: Wed Aug 5 18:37:44 2009 +0200
+
+ digsy_mtc: Add delay in SPI transfers to the companion controller.
+
+ While at it, remove initialization of variables which will be set
+ before usage in all cases.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 0bf00750e082a004e5fb058925622ae72890cc56
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Wed Aug 5 18:37:43 2009 +0200
+
+ digsy_mtc: minor fixes for mtc command help
+
+ Add mtc state subcommand description to the
+ help of mtc command.
+
+ Remove some newlines in description of commands
+ for proper help formating.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 5cc69084189bf49aa99d13d57515be72d1844bdf
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Wed Aug 5 18:37:42 2009 +0200
+
+ digsy_mtc: Add mtc state command.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 716655288a53c95fad203ebf21d0b8ffdc2f7525
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Jul 28 22:35:39 2009 +0200
+
+ Partition support: remove newline from partition name
+
+ Remove bogus newline character that got added to the .name field of
+ the disk_partition_t structure.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3f1649fb0dfb1e5c8890de154c332c394db5cdb5
+Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+Date: Tue Jul 28 09:33:17 2009 +0200
+
+ Fix LZMA string.h header inclusion issue and remove unused variables.
+
+ Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+
+commit 1c6232f1e2eae87e0e36d489611eb6891dff21e1
+Author: Jens Scharsig <esw@bus-elektronik.de>
+Date: Mon Jul 27 15:28:42 2009 +0200
+
+ bus_vcxk.c: fix warning: unused variable 'lineptr'
+
+ Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
+
+commit 18304f7675e84252965b4e24cba279071f1da472
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Jul 24 17:51:27 2009 -0400
+
+ env: kill off default_environment_size
+
+ The only environment type that uses this variable is spi flash, and that is
+ only because it is reimplementing the common set_default_env() function.
+ So fix the spi flash code and kill off the default_environment_size in the
+ process.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit bedd8403f77f790e9876578885eab1200ba2f8d8
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Jul 23 16:37:48 2009 -0400
+
+ export SPI functions to standalone apps
+
+ While we're here, fix the broken #ifdef handling in _exports.h.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 3b9043a7c03290c9bdbef03848307263f5f3472c
+Author: Penda Naveen Kumar <pnaveen@ti.com>
+Date: Fri Jul 31 00:06:36 2009 +0530
+
+ omap3: bug fix for NOR boot support
+
+ This patch provides bug fix, when omap3 uses nor boot.
+
+ Signed-off-by: Penda Naveen Kumar<pnaveen@ti.com>
+ Acked-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 61c68ae0b43bb5d6ab32958c45289aa197b1a2d1
+Author: Michael Evans <horse_dung@hotmail.com>
+Date: Mon Jul 13 20:13:45 2009 +0100
+
+ Fix examples for OMAP3 boards...
+
+ The attached patch corrects an error in the examples/Makefile which
+ causes the applications in the examples directory to hang on OMAP3
+ based boards. The current Makefile sets -Ttext during linking to
+ 0x0c100000 which is outside of addressable SDRAM memory. The script
+ corrects the existing ifeq...else...endif logic to look at the VENDOR
+ tag rather than the CPU tag.
+
+ The patch affects the following configs: omap3_beagle_config,
+ omap3_overo_config, omap3_evm_config, omap3_pandora_config,
+ omap3_zoom1_config and omap3_zoom2_config.
+
+ Signed-off-by: Michael Evans <horse_dung@hotmail.com>
+
+ Edited commit message.
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a3d1421dfd0bb1a729e171f8a093ac837f92cec6
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sat Aug 8 09:30:23 2009 +0200
+
+ omap3: use only fixed-size types inside ctrl_structs
+
+ replace variable types in ctrl_structs for omap3 by those with
+ fixed size (u8, u16, u32).
+ Additional ifndef-protection is needed by examples which do not
+ compile when including asm/types.h
+
+ Signed-off-by: Matthias Ludwig <mludwig@ultratronik.de>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 894113529e3a04871544dde977d6d7adee05d3bf
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sat Aug 8 09:30:22 2009 +0200
+
+ omap3: replace all instances of gpmc config struct by one global
+
+ Signed-off-by: Matthias Ludwig <mludwig@ultratronik.de>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 97a099eaa48d5c762c4f73c52c3090c513b8b877
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sat Aug 8 09:30:21 2009 +0200
+
+ omap3: remove typedefs for configuration structs
+
+ Signed-off-by: Matthias Ludwig <mludwig@ultratronik.de>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit aa0707897c49c330b7d6b8d8362e44f60f224732
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date: Fri Jul 31 13:34:02 2009 +0800
+
+ Add Intel E1000 PCIE card support
+
+ Based on Intel PRO/1000 Network Driver 7.3.20-k2
+ Add Intel E1000 PCIE card support. The following cards are added:
+ INTEL_82571EB_COPPER
+ INTEL_82571EB_FIBER,
+ INTEL_82571EB_SERDES
+ INTEL_82571EB_QUAD_COPPER
+ INTEL_82571PT_QUAD_COPPER
+ INTEL_82571EB_QUAD_FIBER
+ INTEL_82571EB_QUAD_COPPER_LOWPROFILE
+ INTEL_82571EB_SERDES_DUAL
+ INTEL_82571EB_SERDES_QUAD
+ INTEL_82572EI_COPPER
+ INTEL_82572EI_FIBER
+ INTEL_82572EI_SERDES
+ INTEL_82572EI
+ INTEL_82573E
+ INTEL_82573E_IAMT
+ INTEL_82573L
+ INTEL_82546GB_QUAD_COPPER_KSP3
+ INTEL_80003ES2LAN_COPPER_DPT
+ INTEL_80003ES2LAN_SERDES_DPT
+ INTEL_80003ES2LAN_COPPER_SPT
+ INTEL_80003ES2LAN_SERDES_SPT
+
+ 82571EB_COPPER dual ports,
+ 82572EI single port,
+ 82572EI_COPPER single port PCIE cards
+ and
+ 82545EM_COPPER,
+ 82541GI_LF
+ pci cards are tested on both P2020 board
+ and MPC8544DS board.
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 86848a74c3c8eb2f8dd179d039ee604dc45288cf
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Jul 15 21:31:28 2009 -0400
+
+ net: sync env ethaddr to device enetaddr in eth_init()
+
+ In the previous enetaddr refactoring, the assumption with commit 56b555a644
+ was that the eth layer would handle the env -> device enetaddr syncing.
+ This was not the case as eth_initialize() is called only once and the sync
+ occurs there. So make sure the eth_init() function does the env -> device
+ sync with every network init.
+
+ Reported-by: Andrzej Wolski <awolski@poczta.fm>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 0ebf04c607b54a352629dcf7e76b76f1785dae54
+Author: Robin Getz <rgetz@blackfin.uclinux.org>
+Date: Thu Jul 23 03:01:03 2009 -0400
+
+ minor debug cleanups in ./net
+
+ Minor ./net cleanups - no functional changes
+ - change #ifdef DEBUG printf(); #endif to just debug()
+ - changed __FUNCTION__ to __func__
+ - got rid of extra whitespace between function and opening brace
+ - removed unnecessary braces on if statements
+
+ gcc dead code elimination should make this functionally/size equivalent
+ when DEBUG is not defined. (confirmed on Blackfin, with gcc 4.3.3).
+
+ Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 187af954cf7958c24efcf0fd62289bbdb4f1f24e
+Author: Matthias Ludwig <mludwig@ultratronik.de>
+Date: Tue May 19 09:09:31 2009 +0200
+
+ omap3: embedd gpmc_cs into gpmc config struct
+
+ Embedd chip select configuration into struct for gpmc config
+ instead of having it completely separated as suggested by
+ Wolfgang Denk on
+ http://lists.denx.de/pipermail/u-boot/2009-May/052247.html
+
+ Signed-off-by: Matthias Ludwig <mludwig@ultratronik.de>
+
+commit 06bffc6ea52d4b390843d295d438b2037d12e5fd
+Author: David Brownell <david-b@pacbell.net>
+Date: Thu Jul 16 18:40:55 2009 -0700
+
+ rm9200 lowevel_init: don't touch reserved/readonly registers
+
+ For some reason the AT91rm9200 lowlevel init writes to a bunch of
+ reserved or read-only addresses. All the boards seem to define the
+ value-to-be-written values as zero ... but they shouldn't actually
+ be writing *anything* there.
+
+ No documented erratum justifies these accesses. It looks like maybe
+ some pre-release BDI-2000 setup code has been carried along by cargo
+ cult programming since at least late 2004 (per GIT history).
+
+ Here's a patch disabling what seems to be bogosity. Tested on a
+ csb337; there were no behavioral changes.
+
+ Signed-off-by: David Brownell <david-b@pacbell.net>
+
+ on RM9200ek
+ Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 301b7db88fbdf7d118efb79b371b2527a2c31868
+Author: David Hunter <hunterd42@gmail.com>
+Date: Thu Jul 30 14:32:49 2009 -0700
+
+ pxa: Fix typo in GCDR(x)
+
+ Fix a typo in the GCDR(x) macro. It's a good thing no one was using it.
+
+ Signed-off-by: David Hunter <hunterd42@gmail.com>
+
+commit 3c448e648221879ae0e030e94508b4f9f63b7ab8
+Author: Eric Benard <eric@eukrea.com>
+Date: Sat Jul 18 23:45:15 2009 +0200
+
+ Add AT91SAM9260 to at91's lowlevel_init.S
+
+ Needed for AT91SAM9260 NOR Boot on Eukrea's CPU9260.
+
+ Signed-off-by: Eric Benard <eric@eukrea.com>
+
+commit 56bdfa961242fc6acaeebc800640a12b28db3899
+Author: Dirk Eibach <eibach@gdsys.de>
+Date: Thu Jul 30 09:36:33 2009 +0200
+
+ ppc4xx: Remove check for PPC460EX from CompactCenter
+
+ Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c3fa4f0c8684c862ecd3fb622fab1e17e44e82e1
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jul 29 08:46:10 2009 +0200
+
+ ppc4xx: Add support for PPC460EX/460GT rev B chip to AMCC Canyonlands
+
+ This patch is based on a diff created by Phong Vo from AMCC.
+
+ Signed-off-by: Phong Vo <pvo@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 89bcc4875007ef6608297dc11e7a0d1fbd9900d2
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jul 29 08:45:27 2009 +0200
+
+ ppc4xx: Add basic support for AMCC PPC460EX/460GT rev B chips
+
+ This patch is based on a diff created by Phong Vo from AMCC.
+
+ Signed-off-by: Phong Vo <pvo@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 82a7edc7ea8f5fe55fed4ff7e127469569e539c4
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jul 28 15:12:04 2009 +0200
+
+ ppc4xx: Canyonlands-NAND-boot: Support 2 Crucial 512MByte SODIMM's
+
+ Some Canyonlands boards are equipped with different SODIMM's. This is no
+ problem with the "normal" NOR booting Canyonlands U-Boot, since it
+ automatically detects the SODIMM's via SPD data and correctly configures
+ them. But the NAND booting version is different. Here we only have 4k
+ of image size to completely setup the hardware, including DDR2 setup.
+ So we need to use a fixed DDR2 setup here. This doesn't work for different
+ SODIMM's right now.
+
+ Currently only this Crucial SODIMM is support:
+ CT6464AC667.8FB (dual ranked)
+
+ Now some boards are shipped with this SODIMM:
+ CT6464AC667.4FE (single ranked)
+
+ This patch now supports both SODIMM's by configuring first for the dual
+ ranked DIMM. A quick shows, if this module is really installed. If this test
+ fails, the DDR2 controller is re-configured for the single
+ ranked SODIMM.
+
+ Tested with those SODIMM's:
+
+ CT6464AC667.8FB (dual ranked)
+ CT6464AC667.4FE (single ranked)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 27dd5f8e1062684f1ba685760409d9b2ab6691bf
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jul 28 10:56:03 2009 +0200
+
+ ppc4xx: amcc: Move "kernel_addr_r" etc to higher locations (> 16MB)
+
+ This patch moves the load addresses for kernel, fdt and ramdisk to higher
+ addresses (>= 16MB). This enables booting of bigger kernel images (e.g.
+ lockdep enabled).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6942efc2be1b90054fa4afa5cda7023469fe08b9
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jul 28 10:50:32 2009 +0200
+
+ ppc4xx: amcc: Set CONFIG_SYS_BOOTMAPSZ to 16MB for big kernels
+
+ This patch changes CONFIG_SYS_BOOTMAPSZ from 8MB to 16MB which is the
+ initial TLB on 40x PPC's in the Linux kernel. With this change even bigger
+ Linux kernels (> 8MB) can be booted.
+
+ This patch also sets CONFIG_SYS_BOOTM_LEN to 16MB (default 8MB) to enable
+ decompression of bigger images.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 901be89a27e11b2627c132ee87c7761bd6886091
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Jul 28 14:53:44 2009 +0200
+
+ 83xx, kmeter1, fix: update in the DTS the correct size for the first flash
+
+ When updating the "reg" in the "/localbus/flash@f0000000,0" node
+ size was wrong updated for the first flash, because the total
+ size was filled in, instead of the right size for it.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 4c2e3da82dc2b7f8b39b7f1d57f570e4bc5caa6d
+Author: Kumar Gala <kumar.gala@freescale.com>
+Date: Tue Jul 28 21:49:52 2009 -0500
+
+ Update Freescale copyrights to remove "All Rights Reserved"
+
+ "All Rights Reserved" conflicts with the GPL.
+
+ Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
+
+commit bb4291e62579dbc611e84eaaf973631e0bf129c7
+Author: Alessandro Rubini <rubini@unipv.it>
+Date: Fri Jul 24 11:27:14 2009 +0200
+
+ arm nomadik: add i2c
+
+ Signed-off-by: Alessandro Rubini <rubini@unipv.it>
+ Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 60cbfbfd0fbebb4682f10ba96f622bfe17317598
+Author: Alessandro Rubini <rubini@unipv.it>
+Date: Fri Jul 24 11:27:03 2009 +0200
+
+ arm nomadik: add gpio support
+
+ Signed-off-by: Alessandro Rubini <rubini@unipv.it>
+ Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 549b98306d897ae5991362d6096a36df50efe686
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Sun Jun 28 12:52:32 2009 -0500
+
+ OMAP3 Remove twl4030 defines
+
+ These defines have been subplanted by the equivelent defines in
+ include/twl4030.h
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Heiko Schocher <hs@denx.de>
+
+commit fccc0fcaaae5154612f8259365d26d04f204859f
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Sun Jun 28 12:52:31 2009 -0500
+
+ OMAP3 Move twl4030 mmc function
+
+ Because twl4030 now has its own device files, move and rename
+ twl4030_mmc_config.
+
+ twl4030_mmc_config initializes the twl4030 power setting to
+ the mmc device. Because it is in the twl4030 power domain, move
+ it out of drivers/mmc/omap3_mmc.c and into drivers/power/twl4030.c.
+
+ The function was renamed to twl4030_power_mmc_init because all
+ the functions in this file are to have the format
+
+ twl4030_power_<device>_<action>
+
+ In this case the suffix is mmc_init so
+ device : mmc
+ action : init
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Heiko Schocher <hs@denx.de>
+
+commit 2c15513010493435c78f83202940ac3be11de2c3
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Sun Jun 28 12:52:30 2009 -0500
+
+ OMAP3 Move twl4030 power and led functions
+
+ Because twl4030 now has its own device files, move exiting
+ omap3 power_init_r to a new location.
+
+ power_init_r is the only function in board/omap3/common.
+ It initializes the twl4030 power for the board and enables
+ the led.
+
+ The power part of the the function is moved to twl4030_power_init in
+ drivers/power/twl4030.c The power compilation is conditional on the
+ existing config variable CONFIG_TWL4030_POWER.
+
+ The led part is moved to twl4030_led_init in the new file
+ drivers/misc/twl4030_led.c The led compilation is conditional on
+ the new config variable CONFIG_TWL4030_LED
+
+ The directory board/omap3/common was removed because power_init_r
+ was the only function in it.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Heiko Schocher <hs@denx.de>
+
+commit 3cb7a4805fc8fb4c09e4801e1c7d531186f20190
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Jul 28 22:13:52 2009 +0200
+
+ TQM8xx* boards: set larger SMC Rx buffer len
+
+ Commit 2b3f12c2 added support for configurable SMC Rx buffer length on
+ 8xx systems. Enable this feature on TQM8xx* based boards.
+
+ This fixes the problem that pasting text in the middle of a line
+ (i. e. inserting in edit mode) did not work - only the first two
+ characters got inserted, the rest was lost.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4b7511478b62a539e5b066d19a986b75e5d9a527
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Jul 28 22:07:37 2009 +0200
+
+ Fix ext2load return code
+
+ Make the ext2load command return 0 on success (instead of the file
+ length).
+
+ Also fix output format (get rid of random newlines) and some coding
+ style issues (long lines etc.).
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 56fdaadc124a8ef9ec0fd8ff578233ec3b1137be
+Author: Weirich, Bernhard <Bernhard.Weirich@riedel.net>
+Date: Wed Jun 10 14:00:37 2009 +0200
+
+ ext2: fix inode size and calculations
+
+ Signed-off-by: unsik Kim <donari75@gmail.com>
+ Signed-off-by: Bernhard Weirich <bernhard.weirich@riedel.net>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Tested-by: Wolfgang Denk <wd@denx.de>
+
+commit cd7826359ee71e8f6f3d68331930ab9cbe1c990e
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Sun Jun 28 12:52:29 2009 -0500
+
+ TWL4030 Add power reset button
+
+ The Zoom2 power reset button is on the top right side of the
+ main board. Press and hold for about to 8 seconds to completely
+ reset the board.
+
+ Some of the beta boards have a hardware problem that prevents
+ using this feature. If is difficult to further characterize the
+ boards that fail. So disable resetting for all beta boards.
+
+ The Zoom1 reset button is the red circle on the top right,
+ front of the board. Press and hold the button for 8 seconds to
+ completely reset the board.
+
+ After analyzing beagle, it was determined that other boards
+ that use the twl4030 for power managment can also make use
+ this function.
+
+ The resetting is done by the power management part of the twl4030.
+ Since there is no existing drivers/power, add one.
+
+ The compilation of power/twl4030.h is controlled by the config
+ variable CONFIG_TWL4030_POWER
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Heiko Schocher <hs@denx.de>
+
+commit 8966eb4c1c2d894b2a76174ba904c26c5af815b8
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Sun Jun 28 12:52:28 2009 -0500
+
+ TWL4030 Add initial support
+
+ The TWL4030 supplies many peripherals for OMAP3 boards. These include
+ power management, usb and, keyboard.
+
+ The product description is found here:
+
+ http://focus.ti.com/docs/prod/folders/print/tps65950.html
+
+ Product reference document, tps65950.pdf, is found here:
+
+ http://www.ti.com/lit/gpn/tps65950
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Heiko Schocher <hs@denx.de>
+
+commit 7f79dfb48b7419d5caa1cf932fcff4e2fb7040af
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Sun Jun 28 12:52:27 2009 -0500
+
+ OMAP I2C Fix the sampling clock.
+
+ This problem is seen on Zoom1 and Zoom2 in the startup and
+ when i2c probe is used
+
+ Before :
+
+ In: serial
+ Out: serial
+ Err: serial
+ timed out in wait_for_bb: I2C_STAT=1000
+ timed out in wait_for_bb: I2C_STAT=1000
+ timed out in wait_for_bb: I2C_STAT=1000
+ timed out in wait_for_pin: I2C_STAT=1000
+ I2C read: I/O error
+ timed out in wait_for_bb: I2C_STAT=1000
+ timed out in wait_for_bb: I2C_STAT=1000
+ Die ID #327c00020000000004013ddd05026013
+ Hit any key to stop autoboot: 0
+ OMAP3 Zoom1# i2c probe
+ Valid chip addresses:timed out in wait_for_bb: I2C_STAT=1000
+ 02 03 04 05 06 07 08 09 0A 0B 0C 0D <snip>
+
+ After :
+
+ In: serial
+ Out: serial
+ Err: serial
+ Die ID #327c00020000000004013ddd05026013
+ Hit any key to stop autoboot: 0
+ OMAP3 Zoom1# i2c probe
+ Valid chip addresses: 48 49 4A 4B
+
+ The addresses are for the twl4030.
+
+ The prescalar that converts the function clock to the sampling
+ clock is hardcoded to 0. The reference manual recommends 7
+ if the function clock is 96MHz.
+
+ Instead of just changing the hardcoded values, the prescalar
+ is calculated from the value I2C_IP_CLK.
+
+ The i2c #defines are in kHz. The speed passed into the
+ i2c init routine is in Hz. To be consistent, change the
+ defines to be in Hz.
+
+ The timing calculations are based on what is done in the
+ linux 2.6.30 kernel in drivers/i2c/buses/i2c_omap.c as
+ apposed to what is done in TRM.
+
+ The major variables in the timing caculations are
+ specified as #defines that can be overriden as required.
+
+ The variables and their defaults are
+
+ I2C_IP_CLK SYSTEM_CLOCK_96
+ I2C_INTERNAL_SAMPLING_CLK 19200000
+ I2C_FASTSPEED_SCLL_TRIM 6
+ I2C_FASTSPEED_SCLH_TRIM 6
+ I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM I2C_FASTSPEED_SCLL_TRIM
+ I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM I2C_FASTSPEED_SCLH_TRIM
+ I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM I2C_FASTSPEED_SCLL_TRIM
+ I2C_HIGHSPEED_PHASE_TWO_SCLH I2C_FASTSPEED_SCLH_TRIM
+
+ This was runtime verified on Zoom1, Zoom2, Beagle and Overo.
+ The 400kHz and 3.4M cases were verifed on test Zoom1,
+ Zoom2, Beagle and Overo configurations.
+
+ Testing for omap2 will be done in a second step as Nishanth
+ and Jean-Christophe commented.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Heiko Schocher <hs@denx.de>
+
+commit 4ce5a72851ff2960543b125866c6132e0094e1ee
+Author: Heiko Schocher <hs@denx.de>
+Date: Mon Jul 20 09:59:37 2009 +0200
+
+ arm, i2c: added support for the TWSI I2C Interface
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 042d01c72e0ea95731708dd24bb8b6cf42e75c80
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jul 27 09:13:38 2009 +0200
+
+ ppc4xx: Fix problem with NOR range assignment in Canyonlands ft_board_setup
+
+ This patch fixes the problem, that the current fdt board fixup code only
+ set's one range, the one for NOR. By this it's overwriting the already
+ correctly configured values done in __ft_board_setup(). Just remove this
+ now unneeded NOR fixup and all the ranges are correctly defined.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Dirk Eibach <eibach@gdsys.de>
+ Cc: Felix Radensky <felix@embedded-sol.com>
+
+commit 11a1604f8d0a8d936b42f6435d004b4aa33a5d87
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jul 27 07:42:48 2009 +0200
+
+ ppc4xx: Add some NAND-booting bootstrap entries to Kilauea chip_config cmd
+
+ This patch adds some I2C bootstrap setting for NAND booting to the Kilauea
+ chip_config command ("533-nand" and "600-nand").
+
+ Additionally some incorrectly indented lines are fixed.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5b34691ff87821891375b28ec5bcf5154575a735
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jul 27 07:42:37 2009 +0200
+
+ ppc4xx: Kilauea: Fix SDRAM init in NAND booting version
+
+ DDR2 Auto-calibration needs to be disabled on the NAND booting PPC4xx
+ targets. Otherwise the configured fixed init values for some DDR2
+ controller registers (e.g. RQDC) are not initialized at all resulting
+ in a non working SDRAM.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f3ed3c9b7441cde936d06a1ff7b1490ff0d600e6
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jul 27 10:53:43 2009 +0200
+
+ ppc4xx: Fix Arches DDR2 initialization
+
+ Testing on AMCC Arches with the latest U-Boot version yielded that DDR2
+ initialization is currently broken. U-Boot hangs upon relocation to SDRAM
+ or crashes with random traps. This patch fixes this problem. Arches now
+ uses a different WRDTR and CLKTR default setting than Canyonlands/Glacier.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ab4c62c1ba788bf7f673a985d99a76d9c2fd7eca
+Author: Dirk Eibach <eibach@gdsys.de>
+Date: Mon Jul 27 08:49:48 2009 +0200
+
+ ppc4xx: Add GDsys CompactCenter board support.
+
+ Board support for the Guntermann & Drunck CompactCenter and
+ DevCon-Center.
+ Based on the AMCC Canyonlands board support by Stefan Roese.
+
+ Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c2e49f706ba13213f3c8da3a33e88010214e1997
+Author: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+Date: Sat Jul 25 06:19:12 2009 +0200
+
+ mpc83xx: Add esd VME8349 board support
+
+ This patch adds support for the esd VME8349 board equipped with the
+ MPC8349. It's a VME PMC carrier board equipped with the Tundra
+ TSI148 VME-bridge.
+
+ Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit fe613cdd4eb2c5b257a60d8dfb7759742318c28a
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Thu Jul 23 17:10:55 2009 -0400
+
+ sbc8349: combine HRCW flash and u-boot image flash
+
+ Up to this point in time, the sbc8349 board was storing the u-boot
+ image in flash 2x. One for the HRCW value at the beginning of
+ flash (0xff80_0000), and once close to the end of flash (0xfff8_0000)
+ for the actual image that got executed.
+
+ This moves the TEXT_BASE to be the beginning of flash, which makes
+ the second copy of the image redundant, and frees up the flash
+ from the end of the environment storage to the end of the flash
+ device itself.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit be9b56df02168ca97562d6b9ec791136e4cd925a
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu Jul 23 14:09:38 2009 -0500
+
+ mpc83xx: CONFIG_83XX_GENERIC_PCI is now synonymous with CONFIG_PCI; remove the former
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 94978e19f31d225b4f7d97c4acbac1ecfaeb8f69
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 27 10:37:37 2009 +0200
+
+ Prepare 2009.08-rc1 (again, after fixing last minute issues).
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9689ddcca6e01f3637b4442fa8575f29ef4d7aa3
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 27 10:06:39 2009 +0200
+
+ cpu/arm920t/start.S: include <common.h> to have ROUND() defined
+
+ Commit fcd3c87e made include/common.h usable by assembler code but
+ failed to update cpu/arm920t/start.S
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c9ed38cb6de50fdb4aaa60b668c555002903b211
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 27 10:01:11 2009 +0200
+
+ at91cap9adk: fix #ifdef/#endif pairing (2nd try)
+
+ Commit 7024aa14 was supposed to fix the #ifdef/#endif pairing in
+ include/configs/at91cap9adk.h, but did not cate all problems.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit fb364bec5f29164d3ee681fcd9d187be8435db12
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 27 09:58:14 2009 +0200
+
+ Fix include/common.h for boards with CONFIG_STATUS_LED
+
+ The reordering of include/common.h by commit fcd3c87e495f3c48 broke
+ boards with status LED support, resulting in
+ error: #error Status LED configuration missing
+ errors. Undo this reordering to avoid this issue.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 942828a0980b3cea7db698784cc7f6a3e7740b2b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 27 09:19:15 2009 +0200
+
+ ABI: fix build problems due to now needed div64 routine.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 85d6bf0bdc8ccad2d67a9160472f6f8c6bb482fb
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 27 08:50:59 2009 +0200
+
+ PMC405DE: fix out of tree building
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 10c7604d021949464b1e4ba903df95e6b2f0d2ff
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 27 00:24:55 2009 +0200
+
+ Prepare 2009.08-rc1
+
+ Update CHANGELOG, minor coding style fix.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit fafbb2c3e4b35b60ca303ed2ad1c6cf400cd9a22
+Author: rhabarber1848@web.de <rhabarber1848@web.de>
+Date: Fri Jul 24 08:16:30 2009 +0200
+
+ add WATCHDOG_RESET to allow LZMA kernel decompression on slow machines
+
+ Signed-off-by: rhabarber1848@web.de
+
+commit 3c972849f2becbf19c13a24f090d293f37ecf616
+Author: Niklaus Giger <niklaus.giger@member.fsf.org>
+Date: Thu Jul 23 23:31:58 2009 +0200
+
+ Less verbose output when loading vxworks 6.x images
+
+ Loading vxWorks 5.x images resulted just into 3 or 4 lines of output.
+ With vxWorks 6.x and the new GCC it emits about 30 lines, which is
+ far too noisy in my opinion.
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
+
+commit fcd3c87e495f3c48b70c919869fb1e0b93d4880b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Jul 24 00:17:48 2009 +0200
+
+ Make include/common.h usable by assembler code
+
+ Commit 70ebf316 factored out the ROUND() macro into include/common.h,
+ not realizing that the primary use of this macro on AT91 systems was
+ in start.S where common.h was not included, and could not be included
+ because it contains a lot of C code which the assembler doesn't
+ understand.
+
+ This patch wraps such code in common.h in a "#ifndef __ASSEMBLY__"
+ construct, and then adds an include to cpu/arm926ejs/start.S thus
+ solving the problem.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit deec15b3064d3bb0189aede3c2921fd7ee401a0f
+Author: Heiko Schocher <heiko.schocher@invitel.hu>
+Date: Thu Jul 23 13:27:04 2009 +0200
+
+ arm: add _lshrdi3.S
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 52b1bf2c5cd2f8af880dab503d0039b35570665b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 23 13:15:59 2009 +0200
+
+ Make linking against libgcc configurable
+
+ Many (especially ARM) tool chains seem to come with broken or
+ otherwise unusable (for the purposes of builing U-Boot) run-time
+ support libraries `libgcc.a'. By using the "USE_PRIVATE_LIBGCC"
+ setting we allow to use alternative libraries instead.
+
+ "USE_PRIVATE_LIBGCC" can either be set as an environment variable in
+ the shell, or as a command line argument when running "make", i. e.
+ $ make USE_PRIVATE_LIBGCC=yes
+ or
+ $ USE_PRIVATE_LIBGCC=yes
+ $ export USE_PRIVATE_LIBGCC
+ $ make
+
+ The value of "USE_PRIVATE_LIBGCC" is the name of the directory which
+ contains the alternative run-time support library `libgcc.a'. The
+ special value "yes" selects the directory $(OBJTREE)/lib_$(ARCH) .
+
+ Note that not all architectures provide an alternative `libgcc.a' in
+ their lib_$(ARCH) directories - so far, only ARM does.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Cc: Prafulla Wadaskar <prafulla@marvell.com>
+ cc: Stefan Roese <sr@denx.de>
+
+commit 479105065d965121f57b55dcfe83a940cba46ac1
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Wed Jul 22 17:51:56 2009 +0200
+
+ Use do_div from div64.h for vsprintf
+
+ Use do_div from div64.h for vsprintf in case of 64bit division.
+ For 32bit division, do_div from div64.h can't be used as it
+ needs a 64bit parameter.
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+ CC: Simon Kagstrom <simon.kagstrom@netinsight.net>
+
+commit 48287792384a93d77d43aaaa1c06cac275bbe1bb
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Mon Jul 20 09:47:47 2009 +0900
+
+ Fix compiler warnings after loff_t change
+
+ Now 'env_addr' type is loff_t so use correct field type.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 9c67352f727a5b5eff531c852f9cff59fcb17f7f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jul 26 23:28:02 2009 +0200
+
+ Revert "ppc: Unlock cache-as-ram in a consistent manner"
+
+ This reverts commit 982adfc610669482a32127282fe489857a92cfe3.
+
+ This patch causes problems on MPC83xx boards - flash recognition stops
+ working.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 35cf3b57eafe3ee1f693e24267e0ecfefab60251
+Author: Jens Scharsig <esw@bus-elektronik.de>
+Date: Fri Jul 24 10:31:48 2009 +0200
+
+ update the EB+MCF-EV123 board support
+
+ This patch updates the support for EB+MCF-EV123 board and needs
+ the [PATCH 1/2 V3] new video driver for bus vcxk framebuffers
+
+ * remove the board framebuffer driver
+ * use the common bus_vcxk framebuffer driver
+ * adds bmp support
+ * adds splashimage support
+ * fix serveral cosmetical errors
+
+ Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
+ [agust@denx.de: fixed some style issues before applying]
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 04538cdb752eeea8fd23cf7ac3394439f189fb77
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Sun Jul 26 12:05:25 2009 +0200
+
+ video: bus_vcxk.c: fix style issues added by 50217dee
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 50217deeb07911d686790d34d468eb9a5245f68d
+Author: Jens Scharsig <esw@bus-elektronik.de>
+Date: Fri Jul 24 10:09:02 2009 +0200
+
+ new video driver for bus vcxk framebuffers
+
+ This patch adds a new video driver
+
+ * adds common bus_vcxk framebuffer driver
+
+ Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
+ [agust@denx.de: fixed lots of style issues before applying]
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 60e97419246d0a3615758ad6af40680aefb5f7f1
+Author: Alessandro Rubini <rubini@gnudd.com>
+Date: Tue Jul 21 14:09:45 2009 +0200
+
+ lcd.h: define extern vidinfo_t for all cases
+
+ include/lcd.h has different vidinfo for different platforms,
+ and several extern declaration, but one for the default case was
+ missing. This makes them a single extern declaration for everyone.
+
+ Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
+
+commit bcf0b5248952c6b03081dc5cc4ff9e0b2299c5fa
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Sun Jul 26 11:04:59 2009 +0200
+
+ mimc200.c: fix too long lines added by f68378d6
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit f68378d60a905d43155f2e89bf81999d3c93a90a
+Author: Mark Jackson <mpfj-list@mimc.co.uk>
+Date: Tue Jul 21 11:35:22 2009 +0100
+
+ Add LCD support to MIMC200 board
+
+ This patch updates the MIMC200 files to enable the LCD.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+
+commit 69f32e6c24d41fcdf347ff64e9c13b25059ace58
+Author: Mark Jackson <mpfj-list@mimc.co.uk>
+Date: Tue Jul 21 11:18:44 2009 +0100
+
+ Add 16bit colour support in lcd.h
+
+ This patch adds support for LCD_COLOR16 in include/lcd.h.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+
+commit bdc873ea063b8cc6d44c6ab748b7723a97d8d7b3
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Sun Jul 26 10:34:58 2009 +0200
+
+ lib_avr32/board.c: fix too long line added by 716ece1d
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 716ece1de9a7d43a61d8698ac41b71b64f66f9e9
+Author: Mark Jackson <mpfj-list@mimc.co.uk>
+Date: Tue Jul 21 11:11:37 2009 +0100
+
+ Add AVR32 LCD support
+
+ This patch adds support for the AVR32 LCD controller. This patch is
+ based off the latest u-boot-video.
+
+ A quick summary of what's going on:-
+
+ Enable LCDC pixel clock
+ Enable LCDC port pins
+ Add framebuffer pointer to global_data struct
+ Allocate framebuffer
+
+ To use the new code, update your board config to include something like
+ this:-
+
+ #define CONFIG_LCD 1
+
+ #if defined(CONFIG_LCD)
+ #define CONFIG_CMD_BMP
+ #define CONFIG_ATMEL_LCD 1
+ #define LCD_BPP LCD_COLOR16
+ #define CONFIG_BMP_16BPP 1
+ #define CONFIG_FB_ADDR 0x10600000
+ #define CONFIG_WHITE_ON_BLACK 1
+ #define CONFIG_VIDEO_BMP_GZIP 1
+ #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE 262144
+ #define CONFIG_ATMEL_LCD_BGR555 1
+ #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+ #define CONFIG_SPLASH_SCREEN 1
+ #endif
+
+ The standard U-Boot BMP and Splash-screen features should just work.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+ [agust@denx.de: fixed some style issues]
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 6111722a9281c6e04a7304d502556afff6a5a1f8
+Author: Alessandro Rubini <rubini@gnudd.com>
+Date: Sun Jul 19 17:52:27 2009 +0200
+
+ video: move extern declarations from C to headers
+
+ This moves some extern declaration from lcd.c to lcd.h, removing
+ unneeded ifdef around a pair of them. Additionally, since
+ gunzip_bmp() was declared static in cmd_bmp.c but extern in lcd.c, I
+ removed the static. The extra "#include <lcd.h>" in cmd_bmp.c is
+ added to ensure the header is consistent with the source.
+
+ This has been compile-tested on both ARM (at91 boards) and PowerPC
+ (HH405_config, TQM823L_LCD_config, mcc200_config), to test all use
+ combinations.
+
+ Signed-off-by: Alessandro Rubini <rubini@gnudd.it>
+ [agust@denx.de: removed gunzip_bmp() fixes as commit c01171ea did it]
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit f51e001143c58447eb50e7aefa2b09eb4cc1410c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Jul 23 16:26:58 2009 -0400
+
+ Blackfin: restore EVT1 handling in linker script
+
+ Sadly, the Blackfin linker script unification lost a small #ifdef logic
+ needed on older parts. Restore that CONFIG_BFIN_BOOTROM_USES_EVT1 logic.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit f33b325af666b12eafa9ab235b2cd59832d6e51c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Jul 24 14:24:07 2009 +0200
+
+ Revert "zlib: updated to v.1.2.3"
+
+ This reverts commit b201171f2b4d509f3ad510b214bee70ff902e3d6.
+
+ The commit caused problems for example when unpacking kernel images:
+
+ Uncompressing Kernel Image ... Error: inflate() returned -2
+ GUNZIP: uncompress, out-of-mem or overwrite error - must
+ RESET board to recover
+
+ Conflicts:
+
+ include/u-boot/zlib.h
+ lib_generic/zlib.c
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4b1389e0ceb19e9b50b96fd3908483a6c2274fb0
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jul 21 14:06:29 2009 +0200
+
+ ppc4xx: Add chip_config command to AMCC Kilauea eval board
+
+ This patch removes the "alterpll" command and replaces it with the now
+ ppc4xx standard "chip_config" command to configure the I2C bootstrap
+ EEPROM.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f6af8ce0c80327cb6aaa347642026ad838335c23
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jul 21 14:33:52 2009 +0200
+
+ ppc4xx: Fix EEPROM configuration on Kilauea
+
+ Kilauea has an AT24C02 EEPROM which has an 8 byte page. Without defining
+ CONFIG_SYS_EEPROM_PAGE_WRITE_BITS to 3 the "eeprom" command doesn't
+ work correctly.
+
+ Additionally the page write delay (CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS)
+ is set to a more defensive value of 10ms.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 99d8b23bc7e2be04fcbf49c5cec9f5ae76df290c
+Author: Matthias Fuchs <matthias.fuchs@esd.eu>
+Date: Wed Jul 22 13:56:21 2009 +0200
+
+ ppc4xx: Add 405EP based PMC405DE board
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit da799f66ad1d4fc36dd20cc2d7e584493fda8546
+Author: Matthias Fuchs <matthias.fuchs@esd.eu>
+Date: Mon Jul 20 12:15:38 2009 +0200
+
+ ppc4xx: Add struct for 4xx GPIO controller registers
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 58ea142fb2e969f32306c8da1dabfaebd6fa141a
+Author: Matthias Fuchs <matthias.fuchs@esd.eu>
+Date: Wed Jul 22 17:27:56 2009 +0200
+
+ ppc4xx: Replace 4xx lowercase SPR references
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 87c0b72908e05662b8b415e26e1042f4779629da
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jul 20 06:57:27 2009 +0200
+
+ Add "chip_config" command for PPC4xx bootstrap configuration
+
+ This patch adds a generic command for programming I2C bootstrap
+ eeproms on PPC4xx. An implementation for Canyonlands board is
+ included.
+
+ The command name is intentionally chosen not to be PPC4xx specific.
+ This way other CPU's/SoC's can implement a similar command under
+ the same name, perhaps with a different syntax.
+
+ Usage on Canyonlands:
+
+ => chip_config
+ Available configurations (I2C address 0x52):
+ 600-nor - NOR CPU: 600 PLB: 200 OPB: 100 EBC: 100
+ 600-nand - NAND CPU: 600 PLB: 200 OPB: 100 EBC: 100
+ 800-nor - NOR CPU: 800 PLB: 200 OPB: 100 EBC: 100
+ 800-nand - NAND CPU: 800 PLB: 200 OPB: 100 EBC: 100
+ 1000-nor - NOR CPU:1000 PLB: 200 OPB: 100 EBC: 100
+ 1000-nand - NAND CPU:1000 PLB: 200 OPB: 100 EBC: 100
+ 1066-nor - NOR CPU:1066 PLB: 266 OPB: 88 EBC: 88 ***
+ 1066-nand - NAND CPU:1066 PLB: 266 OPB: 88 EBC: 88
+ => chip_config 600-nor
+ Using configuration:
+ 600-nor - NOR CPU: 600 PLB: 200 OPB: 100 EBC: 100
+ done (dump via 'i2c md 52 0.1 10')
+ Reset the board for the changes to take effect
+
+ Other 4xx boards will be migrated to use this command soon
+ as well.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+ Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+
+commit 10c1b218556ed9871f36bc0c407f4f2f6196353b
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 19:01:16 2009 -0500
+
+ xpedite1k: Move to X-ES vendor directory
+
+ The XPedite1000 is an X-ES product thus it can be put in board/xes along
+ with other X-ES boards. Along with the move, the board was renamed to
+ XPedite1000 from XPedite1K to fit X-ES's standard naming convention.
+ Maintainership was also transfered to Peter Tyser.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 54381b79d268e1bead5d78ed8423df31a3cb0e2c
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 19:01:15 2009 -0500
+
+ xpedite1k: Sync checkboard() with other X-ES boards
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9b4ef1f5dc0daab64f46249a32e67279c4d44fd2
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 19:01:14 2009 -0500
+
+ xpedite1k: Sync up board config options with other X-ES boards
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4cdad5f43ae67e4ceeac69ef4af4392bd2f7381f
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 19:01:13 2009 -0500
+
+ xpedite1k: Sync organization of board config with other X-ES boards
+
+ This change should have no functional effect
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c4ae1a0257a0f5008ee2686e8aa92fba3992f279
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 19:01:12 2009 -0500
+
+ xpedite1k: Sync up commands and environment with other X-ES boards
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit fbc7951ea84c2fe6da0f6007b672ed35bae91acb
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 19:01:11 2009 -0500
+
+ xpedite1k: Disable unused ethernet port 1
+
+ The XPedite1000 only has 2 available ethernet ports:
+ ppc_4xx_eth2 (EMAC2) and ppc_4xx_eth3 (EMAC3)
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 767e32ad369d83f55f950e6938e68b6dba7fa65f
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 19:01:10 2009 -0500
+
+ xpedite1k: Store environment in flash
+
+ Previously an I2C EEPROM was used. The EEPROM had size, reliability,
+ and access issues which are resolved by storing the environment in
+ flash.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b88da157f9990cd2cb081e4faea4b9581b5d0e2f
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 19:01:09 2009 -0500
+
+ xpedite1k: Add support for additional GPIO pins
+
+ Enable GPIO pins for an I2C EEPROM write protect, a system reset pin,
+ and a PMC #MONARCH pin. These pins are not currently used in U-Boot,
+ but are used in OSes and may be used in U-Boot in the future.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 42735815dd9ba39efe51203868aebce04053c8de
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 19:01:08 2009 -0500
+
+ xpedite1k: Add support for optional flashes
+
+ The XPedite1000 can be built with 4 total flashes:
+ - 512KB AMD socketed
+ - 16MB Intel soldered
+ - 2 x 32MB AMD MirrorBit flashes
+
+ Add support for the optional 2 32MB CFI-compliant AMD flashes
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e02990764c7415c84668823a0fc8c5b4dd8d8cf0
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 19:01:07 2009 -0500
+
+ xpedite1k: Cleanup coding style
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 086ff34a3a7e5e595630d658c1c13778399452d1
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 19:01:06 2009 -0500
+
+ xpedite1k: Remove support for reading MACs from EEPROM
+
+ By default, the XPedite1000 comes installed with xMon, a proprietary
+ bootloader. xMon stores its MAC address in an onboard EEPROM. Rather
+ than requiring a non-standard location in the EEPROM to be reserved for
+ MAC addresses, store the MAC addresses in U-Boot's standard environment.
+ A U-Boot application or OS application can be used to migrate xMon MAC
+ addresses to U-Boot's environment if necessary.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 108d6d0099372f9f6532c3198fbaacabc121c9b3
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 19:01:05 2009 -0500
+
+ xpedite1k: Remove support for fixed SDRAM configuration
+
+ All XPedite1000's have SPD EEPROMs present and no fixed configuration
+ parameters are currently defined or used
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c86d00a2ed923002f1ab0bfb0a925522628302e9
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 19:01:04 2009 -0500
+
+ xpedite1k: Remove CONFIG_SYS_DRAM_TEST support
+
+ POST or command line tests provide similar functionality
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 11ad309c183b176d8866944026a63c0f1c626f56
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 19:01:03 2009 -0500
+
+ xpedite1k: Use standard CFI flash driver
+
+ Using the CFI flash driver will allow write access to the 16MB Intel
+ StrataFlash present on the XPedite1000. The 512KB socketed (non
+ CFI-compliant flash) will no longer be writable.
+
+ The mapping of the 16MB Strata flash was moved to 0xff000000 and the
+ 512KB AMD socketed flash was moved to 0xfe000000.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d4d2e79bb433fc7ec18c68cc49cc6b7433d1320c
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Thu Jul 16 22:13:57 2009 +0200
+
+ ppc4xx: Cleanup PLU405 board code
+
+ Some Coding style cleanup (braces, whitespaces, long lines)
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b209a114829dc8a7a0e39a9335b6e4aebf9742cb
+Author: Dirk Eibach <eibach@gdsys.de>
+Date: Fri Jul 17 14:16:40 2009 +0200
+
+ ppc4xx: Add DL-Vision 405EP board support
+
+ Board support for the Guntermann & Drunck DL-Vision.
+
+ Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9b1b8c8a1bf52e9b65e1958e5205838576066cbc
+Author: Dirk Eibach <eibach@gdsys.de>
+Date: Fri Jul 10 14:47:32 2009 +0200
+
+ ppc4xx: Fix missing freqOPB for 405EP
+
+ In cpu/ppc4xx/speed.c initialization of sysInfo->freqOPB for 405EP was
+ left out for no obvious reason.
+
+ Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0a371ca08908c9b2a58171223a79bffea1f7c6f5
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jul 14 15:53:08 2009 +0200
+
+ ppc4xx: Fix TLB reset problem with recent 44x images
+
+ Patch d873133f [ppc4xx: Add Sequoia RAM-booting target] broke "normal"
+ booting on some 44x platforms. This breakage is only noticed in some
+ cases while powercycling. As it seems, the code in question in start.S
+ didn't invalidate TLB #0. This makes sense since this TLB is used for
+ the bootrom mapping. With the patch mentioned above even TLB #0 got
+ invalidated resulting in an error later on.
+
+ This patch now fixes this issue by only invalidating TLB #0 in the RAM-
+ booting case.
+
+ Tested succesfully on Sequoia and Canyonlands.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Dirk Eibach <Eibach@gdsys.de>
+
+commit 44259bb9e696d22bf1773181111855a29f00cf33
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Fri Jul 17 19:56:30 2009 +0530
+
+ usb: bugfix driver/usb/host/ehci-hcd.c function ehci_submit_root
+
+ This change is cheked in Linux source and fix found to be in sync.
+ This patch is tested for USB host interface on Kirkwood based
+ Sheevaplug platform (ARM little endian board)
+
+ Risk: the impact of this patch is not validated on big endian board.
+ This need to be checked...
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 28958b8bea4c66629c5a22fd3c8b0d49df90383d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 23 22:23:23 2009 +0200
+
+ Coding Style cleanup; update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2632c008e2c2cd61fefb622ed671ea3e6bd2e2a6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Jul 21 22:59:36 2009 -0400
+
+ autoconf.mk: include before config.mk for top level files
+
+ By including autoconf.mk before config.mk, all top level files can use any
+ config options it sets up (like <arch>_config.mk) or the Makefile itself
+ without being forced to use lazy evaluation.
+
+commit c01171eaecc963d2c1f56a0984a0cbcdd8a3ab3c
+Author: Mark Jackson <mpfj-list@mimc.co.uk>
+Date: Tue Jul 21 11:30:53 2009 +0100
+
+ Remove static declaration from gunzip_bmp()
+
+ This patch removes the static declaration from gunzip_bmp()
+
+ Without it, the gunzip_bmp() function is not visible to
+ common/lcd.c and fails to compile with an error.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+
+commit 2d4a43e230a3c8bfd03b9beaa0eb2a95e779c03b
+Author: Peter Tyser <ptyser@gmail.com>
+Date: Mon Jul 20 21:51:38 2009 -0500
+
+ cmd_tsi148: General cleanup
+
+ - Fix command help message
+ - Disable DEBUG by default
+ - Fix whitespace issues
+ - Fix lines > 80 characters
+
+ Signed-off-by: Peter Tyser <ptyser@gmail.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 9aef73888509d10193615ee5cd9cf439ca44e937
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jul 19 15:17:03 2009 -0400
+
+ unify HOST_CFLAGS and HOSTCFLAGS
+
+ The top build system sets up HOSTCFLAGS a bit and exports it, but other
+ places use HOST_CFLAGS instead. Unify the two as HOSTCFLAGS so that the
+ values stay in sync.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2e9393f500065f940e5e4ac7fe375e4c0b77b936
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 23 21:16:59 2009 +0200
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e3b39f84e974df70065fa248f0f63993b1708c9d
+Author: André Schwarz <andre.schwarz@matrix-vision.de>
+Date: Fri Jul 17 14:50:24 2009 +0200
+
+ update config for mvBC-P (MPC5200)
+
+ This patch adds I2C support for mvBC-P and defines flash layout
+ matching the shipped product.
+
+ Signed-off-by: André Schwarz <andre.schwarz@matrix-vision.de>
+
+commit cb6d0b72c2c4f13c0075a7ae92e11682ec94a311
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Jul 13 09:24:00 2009 -0500
+
+ ahci: Fix gcc 4.4 compiler warning
+
+ ahci.c: In function 'ata_scsiop_read_capacity10':
+ ahci.c:616: warning: dereferencing type-punned pointer will break strict-aliasing rules
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 51d91e1a253c97713c7f3e5c0b910a4db4979283
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Jul 13 09:23:59 2009 -0500
+
+ drivers/bios_emulator: Fix gcc 4.4 compiler warning
+
+ biosemu.c: In function 'BE_setVGA':
+ biosemu.c:147: warning: dereferencing type-punned pointer will break strict-aliasing rules
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f97ec30bb3c5a4a456159eb2b75b3bc68772bf2a
+Author: Detlev Zundel <dzu@denx.de>
+Date: Mon Jul 13 16:01:19 2009 +0200
+
+ Re-add support for image type 'Standalone Program'
+
+ Support for this type was lost during the bootm refactoring.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit ca95c9df0280f40e8e4befadbaae21fa67d92331
+Author: Detlev Zundel <dzu@denx.de>
+Date: Mon Jul 13 16:01:18 2009 +0200
+
+ Add error checking for unsupported OS types.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 982adfc610669482a32127282fe489857a92cfe3
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 10 18:46:10 2009 -0500
+
+ ppc: Unlock cache-as-ram in a consistent manner
+
+ Previously, non-e500 architectures only unlocked their data cache which
+ was used as early RAM when booting to Linux using the "bootm" command.
+ This change causes all PPC boards with CONFIG_SYS_INIT_RAM_LOCK defined
+ to unlock their data cache during U-Boot's initialization. This
+ improves U-Boot performance and provides a common cache state when
+ booting to different OSes.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit b201171f2b4d509f3ad510b214bee70ff902e3d6
+Author: Giuseppe CONDORELLI <giuseppe.condorelli@st.com>
+Date: Thu Jul 23 04:54:45 2009 -0400
+
+ zlib: updated to v.1.2.3
+
+ This patch updates zlib to the latest stable version.
+
+ Only relevant zlib parts were ported to u-boot tree, as was done for
+ the previously used version of zlib (0.95). New zlib gives faster
+ inflate performance and other improvements, see www.zlib.net
+
+ Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com>
+ Reviewed-by: Angelo Castello <angelo.castello@st.com>
+
+ Edited commit message
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 97cfe86163505ea18e7ff7b71e78df5bb03dad57
+Author: Robin Getz <rgetz@blackfin.uclinux.org>
+Date: Tue Jul 21 12:15:28 2009 -0400
+
+ Save server's MAC address in environment
+
+ Linux's netconsole works much better when you can pass it the MAC address of
+ the server. (otherwise it just uses broadcast, which everyone else on my
+ network complains about :)
+
+ This sets the env var "serveraddr" (to match ethaddr), so that you can pass
+ it to linux with whatever bootargs you want to....
+
+ addnetconsole=set bootargs $(bootargs) netconsole=@$(ipaddr)/eth0,@$(serverip)/$(serveraddr)
+
+ Signed-of-by: Robin Getz <rgetz@blackfin.uclinux.org>
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 0b23fb368d08c9669fac647971ff249c3f9fee8f
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Tue Jul 21 19:32:21 2009 +0400
+
+ fec_mxc: driver for FEC ethernet controller on i.MX27
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 0544c63681d2ea3607faf374e9c56f101e365b42
+Author: Alessio Centazzo <centazzo@gmail.com>
+Date: Sat Jul 11 11:56:06 2009 -0700
+
+ ppc4xx: Fixed compilation warning in 4xx_enet.c
+
+ This patch fixes a compilation warning for some Ethernet PHY-less
+ PPC4xx platforms (440SPE based ones) and a potential compilation
+ error for 440SP platforms (use of undefined 'ethgroup' variable).
+ In the original code and in case of 440SPE platforms, 'ethgroup'
+ is initialized to -1 and never modified. Later in the function,
+ within an #ifdef statement, an 'if statement' executes code only
+ if 'ethgroup' is set to 4, therefore it is harmless to avoid
+ executing the 'if statement' by removing the CONFIG_440SPE from
+ the affected #ifdefs. In case of 440SP platforms with on-board
+ Ethernet PHY, 'ethgroup' is undefined but used (there are not such
+ platforms in the repository yet). All other architectures are not
+ affected by this change.
+
+ Signed-off-by: Alessio Centazzo acpatin@yahoo.com
+ Acked-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 09133f8580f0106429ba3600f1855bd3577ae58b
+Author: Michael Zaidman <michael.zaidman@gmail.com>
+Date: Tue Jul 14 23:37:12 2009 +0300
+
+ DHCP regression on 2009-06
+
+ Fixed the DHCP/BOOTP/RARP regression introduced in u-boot-2009.06
+ by initializing our IP addr to 0 in order to accept any IP addr
+ assigned to us by the DHCP/BOOTP/RARP server.
+
+ Ack-by: Robin Getz <rgetz@blackfin.uclinux.org>
+ Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 443ce4ac9d1138ae5ae6863b2d40a96fd6edf523
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Thu Jul 16 20:58:02 2009 +0530
+
+ net: phy: bugfixes: mv88E61xx multichip addressing support
+
+ With these fixes, this driver works properly for multi chip
+ addressging mode
+
+ Bugfixes:
+ 1. Build error fixed for function mv88e61xx_busychk_multic-fixed
+ 2. PHY dev address error detection- fixed
+ 3. wrong busy bit was refered in function mv88e61xx_busychk -fixed
+ 4. invalid data read ptr was refered for RD_PHY in case of
+ multichip addressing mode -fixed
+
+ The Multichip Address mode is tested with RD6281A board having
+ MV88E6165 switch on it
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 16025ea45539219f2a7c750c6f0ae983ea5c2737
+Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
+Date: Wed Jul 8 13:05:11 2009 +0200
+
+ arm: Kirkwood: Check the error summary bit for error detection
+
+ The Marvell documentation for the 88f6281 states that the error coding
+ is only valid if the error summary and last frame bits in the transmit
+ descriptor status field are set. This patch adds checks for these for
+ transmit (I would get transmit errors on bootp with the current check,
+ which I believe are spurious).
+
+ Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 7b05f5e027b81cd3a9a41c6c6d3fe09c72fa93f6
+Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
+Date: Wed Jul 8 13:03:18 2009 +0200
+
+ arm: Kirkwood: Fix compiler optimization bug for kwgbe_send
+
+ kwgbe_send/recv both have loops waiting for the hardware to set a bit.
+ GCC 4.3.3 cleverly optimizes the send case to ... a while(1); loop. This
+ patch uses readl to force a read from device memory. Other volatile
+ accesses have also been replaced with readl/writel where appropriate
+ (as per suggestions on the U-boot mailing list).
+
+ Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3f6b18ffd94621625de961bc566022b0266790f5
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Thu Jul 2 13:21:22 2009 -0400
+
+ MIIPHYBB: Return 0xFFFF if the PHY is not asserting TA.
+
+ This patch sets the returned value to 0xFFFF if the PHY does not exist
+ and does not assert Transfer Acknowledge. A NULL check for the value
+ pointer is also added for buffer overflow protection.
+
+ Without this patch 'mii info' will show 'phantom' devices because the
+ value will be not be initialized and return with some random value.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 736fead8fdbf8a8407048bebc373cd551d01ec98
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Mon Jul 20 22:01:11 2009 -0700
+
+ Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API
+
+ All in-tree boards that use this controller have CONFIG_NET_MULTI added
+ Also:
+ - changed CONFIG_DRIVER_SMC911X* to CONFIG_SMC911X*
+ - cleaned up line lengths
+ - modified all boards that override weak function in this driver
+ - added
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+ Tested-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 3bd0a877b74b9c005ae7cb892480ccedfa308c20
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Fri Jul 17 00:50:15 2009 -0700
+
+ Add warning about upcoming removal of old Ethernet API
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit b7fe25d2a8d1cede401d09e1f9c84f8fe47bdbb1
+Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+Date: Thu Jul 2 16:15:13 2009 +0530
+
+ P2020RDB Added support of Vitesse PHYs VSC8641(RGMII) and VSC8221(SGMII)
+
+ These PHYs are on P2020RDB platform.
+
+ Also revamped Freescale copyright message in drivers/net/tsec.c.
+
+ Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 1a32bf41881b5dbe3119cb77a33572b4d462cabf
+Author: Robin Getz <rgetz@blackfin.uclinux.org>
+Date: Mon Jul 20 14:53:54 2009 -0400
+
+ Add DNS support
+
+ On 04 Oct 2008 Pieter posted a dns implementation for U-Boot.
+
+ http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg10216.html
+ >
+ > DNS can be enabled by setting CFG_CMD_DNS. After performing a query,
+ > the serverip environment var is updated.
+ >
+ > Probably there are some cosmetic issues with the patch. Unfortunatly I
+ > do not have the time to correct these. So if anybody else likes DNS
+ > support in U-Boot and has the time, feel free to patch it in the main tree.
+
+ Here it is again - slightly modified & smaller:
+ - update to 2009-06 (Pieter's patch was for U-Boot 1.2.0)
+ - README.dns is added
+ - syntax is changed (now takes a third option, the env var to store
+ the result in)
+ - add a random port() function in net.c
+ - sort Makefile in ./net/Makefile
+ - dns just returns unless a env var is given
+ - run through checkpatch, and clean up style issues
+ - remove packet from stack
+ - cleaned up some comments
+ - failure returns much faster (if server responds, don't wait for
+ timeout)
+ - use built in functions (memcpy) rather than byte copy.
+
+ Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
+ Signed-off-by: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 88ad3fd91c83a4343b25385fd78fd8e29ebb723f
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Jul 17 12:17:00 2009 -0500
+
+ net: tsec - fix dereferencing type-punned pointer will break strict-aliasing rules warning
+
+ fix this gcc 4.4 warning:
+
+ tsec.c: In function 'tsec_init':
+ tsec.c:200: warning: dereferencing type-punned pointer will break strict-aliasing rules
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d9bec9f42ab34383737c8a94429aa02fe76d7946
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Jul 18 21:04:08 2009 -0400
+
+ net: rename NetRxPkt to NetRxPacket
+
+ The net code is mostly consistent in using 'Packet' rather than 'Pkt', so
+ rename the minor detractor to follow suite.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 88a4c2e77cd5674db745d0c2ebbad68c9baf760c
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Jun 25 16:33:04 2009 +0900
+
+ sh: sh_eth: Remove garbage from printf
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 2ea20efa47da9d98ff38223ff51dea5439ad8708
+Author: Andreas Pretzsch <apr@cn-eng.de>
+Date: Thu Jul 9 21:50:05 2009 +0200
+
+ smc911x: add support for LAN9221
+
+ Signed-off-by: Andreas Pretzsch <apr@cn-eng.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 7168eba729b9e6d730db7cd1028767f7b1a6128b
+Author: David Brownell <david-b@pacbell.net>
+Date: Tue Jun 9 11:14:24 2009 -0700
+
+ rm9200 ethernet driver: board-specific quirk (csb337)
+
+ CSB337 boards originally shipped with MicroMonitor, not U-Boot;
+ and with a version using a different convention for recording
+ Ethernet addresses than anyone else. To avoid breaking Linux
+ when it uses U-Boot, have it use the same convention on that
+ hardware.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 57215cd2e59fd403248df8f2f195e382900d5fc2
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Jul 16 09:58:31 2009 +0200
+
+ arm, kirkwood: added kw_gpio_set_valid() in gpio.h
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit ec16441085f471c03a8c0909579463e31e5b947a
+Author: Dieter Kiermaier <dk-arm-linux@gmx.de>
+Date: Mon Jun 29 14:45:08 2009 +0200
+
+ Kirkwood: add Marvell Kirkwood gpio driver
+
+ Signed-off-by: Dieter Kiermaier <dk-arm-linux@gmx.de>
+ Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Tested-by: Heiko Schocher <hs@denx.de>
+
+commit 688b6a0ff2dcbb0c7e63ef63cbbcc291f14f321f
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Jul 16 09:59:10 2009 +0200
+
+ arm, kirkwood: added KW_TWSI_BASE in kirkwood.h
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit fbc8365ad7ab0afd4143bdbffab2fd0b24df004f
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Thu Jul 16 21:02:24 2009 +0530
+
+ Marvell RD6281A Board support
+
+ This is Marvell's 88F6281_A0 based reference design board
+
+ This patch is tested for-
+ 1. Boot from DRAM/NAND flash/NFS
+ 2. File transfer using tftp and loadb
+ 3. NAND flash read/write/erase
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2906e6d654fcc7f2451fde225e4e8b3f20c9555f
+Author: Piotr Ziecik <kosmo@semihalf.com>
+Date: Fri Jul 17 16:35:19 2009 +0200
+
+ api: Fix broken build on ARM.
+
+ This patch fixes broken build introduced by commit
+ 84bf7ca522e94ec402a1264b01971b924b7e268f (api: remove un-needed
+ ifdef CONFIG_API already handle by the Makefile).
+
+ Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
+
+commit 48677a1ef5f82adca49145a7baf11ece77f51945
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jul 22 23:53:23 2009 +0200
+
+ Fix "ld: cannot find -lstubs" build error
+
+ Commit 1bc15386 moved the examples/ to examples/standalone but failed
+ to adapt the Makefiles that need to link against libstubs.a
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit ae71121a111ddf9dd057cacbbdd0f51054be428a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jul 18 20:47:36 2009 +0200
+
+ at91cap9adk: fix #ifdef/#endif pairing
+
+ The #ifdef/#endif pairing in this file was obviously messed up.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6b96a20d512b04a808438553874c00cf40812c44
+Author: Minkyu Kang <mk7.kang@samsung.com>
+Date: Mon Jul 20 11:40:01 2009 +0900
+
+ ARM Cortex A8: Move OMAP3 specific reset handler
+
+ Because of the reset_cpu is soc specific, should be move to soc
+
+ Cc: Dirk Behme <dirk.behme@googlemail.com>
+ Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
+
+commit 048e7efe91f66094f868281c12e488ce2bae8976
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jul 22 10:12:39 2009 -0500
+
+ 85xx/86xx: Replace in8/out8 with in_8/out_8 on FSL boards
+
+ The pixis code used in8/out8 all over the place. Replace it with
+ in_8/out_8 macros.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0a6d0c6320b77bd6572393a93e6b8ccdf39c7100
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jul 21 13:51:08 2009 -0500
+
+ xpedite5370: Enable NAND command support
+
+ Use the MPC8572's eLBC to access 1 GB (or greater) onboard NAND flash
+ via the 'nand' command.
+
+ Previously, the XPedite5370's NAND chip selects were properly
+ configured, but NAND support was not enabled.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 39121c0896a6760bd436d88c17892f49a97902d0
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jul 21 13:51:07 2009 -0500
+
+ xes: Increase CONFIG_SYS_BOOTM_LEN to 16MB
+
+ Increasing CONFIG_SYS_BOOTM_LEN from 8 MB to 16 MB is necessary to
+ support uncompressing images larger than 8 MB when using the bootm
+ command.
+
+ Note that recent Linux kernels for the 85xx and 86xx map greater than
+ 16MB of memory on bootup, but we use 16MB to maintain compatibility with
+ older Linux kernels for now.
+
+ Signed-off-by: Nate Case <ncase@xes-inc.com>
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 58f31b602dfd52eb7836ab82caa587514e046f02
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sun Jul 19 19:17:41 2009 -0500
+
+ xpedite5370: Fix I2C GPIO initialization typo
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Acked-by: Heiko Schocher<hs@denx.de>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 5ff821006c6e7647d183ea95817044943bb22e7e
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sun Jul 19 19:17:40 2009 -0500
+
+ xpedite5200,5370: Use buffered NOR flash writes
+
+ Buffered writes are possible on the XPedite5200 and XPedite5370 and greatly
+ improve NOR flash write speeds
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d9c147f371800a479a507a816b2fe572c97da197
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 10:14:48 2009 -0500
+
+ 85xx, 86xx: Add common board_add_ram_info()
+
+ Previously, 85xx and 86xx boards would display DRAM information on
+ bootup such as:
+
+ ...
+ I2C: ready
+ DRAM:
+ Memory controller interleaving enabled: Bank interleaving!
+ 2 GB
+ FLASH: 256 MB
+ ...
+
+ This patch moves the printing of the DRAM controller configuration to a
+ common board_add_ram_info() function which prints out DDR type, width,
+ CAS latency, and ECC mode. It also makes the DDR interleaving
+ information print out in a more sane manner:
+
+ ...
+ I2C: ready
+ DRAM: 2 GB (DDR2, 64-bit, CL=4, ECC on)
+ DDR Controller Interleaving Mode: bank
+ FLASH: 256 MB
+ ...
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 12a440ae6d09445140f1a0c2023dba76a9f1a617
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 10:14:47 2009 -0500
+
+ tqm85xx: Remove board_add_ram_info()
+
+ This is in preparation for adding one common 8xxx board_add_ram_info()
+ function for all 8xxx boards
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ed2c9488bbe389b7b25cada1e42bdae5d0976327
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 10:14:46 2009 -0500
+
+ xes: Remove 8xxx board_add_ram_info() function
+
+ This is in preparation for adding one common 8xxx board_add_ram_info()
+ fuction for all 8xxx boards
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e7ee23ec1788d8cf269a4cf6b9cd3722cbc7d592
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 17 10:14:45 2009 -0500
+
+ 86xx: Rename ccsr_ddr's sdram_mode_1, sdram_cfg_1 fields
+
+ Rename sdram_mode_1 to sdram_mode and sdram_cfg_1 to sdram_cfg to match
+ the 86xx user's manual and other Freescale architectures
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f6155c6fbb1d85f517b7c160570f0995ef14c43f
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date: Thu Jul 9 10:05:48 2009 +0800
+
+ 85xx: Add pci/pcie E1000 ethernet support for MPC8544DS and MPC8536 boards
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6bb5b412291177e6edd42f9a80e5c5afe57a6a0f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Jul 14 22:42:01 2009 -0500
+
+ 85xx: Report which "bank" of NOR flash we are booting from on FSL boards
+
+ The p2020DS, MPC8536DS, MPC8572DS, MPC8544DS boards are capable of
+ swizzling the upper address bits of the NOR flash we boot out of which
+ creates the concept of "virtual" banks. This is useful in that we can
+ flash a test of image of u-boot and reset to one of the virtual banks
+ while still maintaining a working image in "bank 0".
+
+ The PIXIS FPGA exposes registers on LBC which we can use to determine
+ which "bank" we are booting out of (as well as setting which bank to
+ boot out of).
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9af9c6bdc16da53772c56b1a79c2c91701fe94e6
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jul 15 13:45:00 2009 -0500
+
+ 86xx: Report which "bank" of NOR flash we are booting from on MPC8641HPCN
+
+ The MPC8641HPCN board is capable of swizzling the upper address bit of
+ the NOR flash we boot out of which creates the concept of "virtual"
+ banks. This is useful in that we can flash a test of image of u-boot
+ and reset to one of the virtual banks while still maintaining a
+ working image in "bank 0".
+
+ The PIXIS FPGA exposes registers on LBC which we can use to determine
+ which "bank" we are booting out of (as well as setting which bank to
+ boot out of).
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit caf72ff329759b4da71352ab098537c7698c0e9f
+Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+Date: Tue Jul 21 10:45:49 2009 +0200
+
+ Refresh LZMA-lib to v4.65
+
+ Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+
+commit 70ebf31633f372a24505e47846b2628e8435ea37
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Jul 17 23:35:29 2009 +0200
+
+ AT91: factor out ROUND() macro
+
+ A large number of boards (all AT91 based) duplicated the ROUND()
+ macro in their board specific config files. Add the definition to
+ include/common.h and clean up the board config files.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 89188a62333c0841a7166783d2ebdd39d7044eb2
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jul 15 08:54:50 2009 -0500
+
+ 85xx: Bump up the BOOTMAP to 16M on FSL 85xx boards
+
+ We have always mapped at least 16M in the kernel and we have seen cases
+ with new kernel features that a kernel image needs more than 8M of
+ memory.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d4abc757c26c531293f5bbc4262ade44a317eec9
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Jul 20 19:02:21 2009 -0500
+
+ Move api_examples to examples/api
+
+ Also add a rule to remove demo.bin which was previously leftover
+ after a "make clean"
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit af1d7d984a23a0faa1f436ebfeb55c876b1a99e1
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Jul 21 06:37:28 2009 +0200
+
+ 83xx, kmeter: fix compile error
+
+ CONFIG_SYS_MALLOC_LEN is defined in the board config, and
+ the keymile-common.h, which collects common options used
+ by all keymile-boards. This results in a compile error
+ when compiling the kmeter1 board. So remove this define
+ in the board config file.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 39df00d9aecfb465b9eec9af593f9b763fb5209a
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Jul 9 12:04:26 2009 +0200
+
+ i2c, mpc83xx: add CONFIG_SYS_I2C_INIT_BOARD for fsl_i2c
+
+ This patch adds the possibility to call a board specific
+ i2c bus reset routine for the fsl_i2c bus driver, and adds
+ this option for the keymile kmeter1 board.
+
+ The deblock sequence for this board is implemented and
+ tested in the following way:
+
+ CR = 0x20 (release SDA and SCL pin)
+ CR = 0xa0 (start read)
+ dummy read
+ dummy read
+ if 2. dummy read == 0x00
+ 3. dummy read
+
+ CR = 0x80 (SDA and SCL now 1 SR = 0x86)
+ CR = 0x00 (Modul reset SR=0x81)
+ CR = 0x80 (SDA and SCL = 1, SR = 0x81)
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 1bc1538613d66cef3cbce680fc8d7c3561a0fbd0
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 10 11:03:19 2009 -0500
+
+ Move examples/ to examples/standalone
+
+ The current files in examples are all standalone application examples,
+ so put them in their own subdirectory for organizational purposes
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit b220c64d86f7c705a183302c3b50076d7e5d876c
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jul 10 11:03:15 2009 -0500
+
+ Move architecture specific config.mk files into subdirs
+
+ This cleans up U-Boot's toplevel directory a bit and makes the
+ architecture 'config.mk' file naming and location similar to board
+ and cpu 'config.mk' files
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 082becd0d546399637fa94fdf9f1730a0f7bf348
+Author: Po-Yu Chuang <ratbert@faraday-tech.com>
+Date: Fri Jul 10 18:25:34 2009 +0800
+
+ Add "tags" to .gitignore file.
+
+ Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit dc71b248ef0d5e12b19f33c6efb873e31df91fa9
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Jul 9 12:04:18 2009 +0200
+
+ powerpc: updates for the keymile boards
+
+ - CONFIG_SYS_MAX_I2C_BUS changed to 1
+ We use only one I2C hardwarecontroller on this boards, so
+ change the CONFIG_SYS_MAX_I2C_BUS to 1.
+ - common: dont print errormsg if second IVM Block lacks.
+ - 82xx, mgcoge: fix double mtdpart entry in environment
+ - 82xx, mgcoge: activate on second Flash the second bank.
+ - common: CONFIG_ENV_SIZE 0x4000 for all keymile boards
+ - common: Change malloc size to 1MByte for all Keymile boards
+ We need a bigger malloc area for the environment support (128k)
+ on some Keymile boards (kmeter1) and the upcoming UBI support.
+ Change it to 1MB for all Keymile boards to be on the save side.
+ Also define CONFIG_SYS_64BIT_VSPRINTF which is needed for
+ UBI/UBIFS support.
+ - Add UBI support to all Keymile boards
+ - change manner of writing "/localbus/ranges" node
+ instead of writting the complete "/localbus/ranges" node
+ before booting Linux, only update the ranges entries
+ which gets dynamical detected (size of flashes).
+ This is needed, because keymile adds in the DTS
+ "/localbus/ranges" node entries, which u-boot must
+ not overwrite/delete.
+ - kmeter, mgcoge: define 2 seperate regions needed for the Intel P30 chips
+ The Intel P30 chip has 2 non-identical chips on
+ one die, so we need to define 2 seperate regions
+ that are scanned by physmap_of independantly.
+ - kmeter1: Add MTD concat support to Keymile boards
+ - 82xx, mgcoge: add "unlock=yes" to default environment
+ - added CONFIG_MTD_DEVICE to get in sync with mainline code
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f14d81050a9e0fa57aedb1bc746c60a07c1ad67f
+Author: galak <galak@ducky.am.freescale.net>
+Date: Tue Jul 7 15:53:21 2009 -0500
+
+ fsl_sata: Fix compiler warnings shown by gcc-4.4
+
+ Update fsl_sata to use common structures instead of casting
+ back and forth between the fsl specific ones and the common ones
+ (which are identical).
+
+ fsl_sata.c: In function 'scan_sata':
+ fsl_sata.c:550: warning: dereferencing pointer 'cfis' does break strict-aliasing rules
+ fsl_sata.c:549: warning: dereferencing pointer 'cfis' does break strict-aliasing rules
+ fsl_sata.c:548: warning: dereferencing pointer 'cfis' does break strict-aliasing rules
+ fsl_sata.c:545: note: initialized from here
+ fsl_sata.c:592: warning: dereferencing pointer 'cfis' does break strict-aliasing rules
+ fsl_sata.c:590: warning: dereferencing pointer 'cfis' does break strict-aliasing rules
+ fsl_sata.c:588: warning: dereferencing pointer 'cfis' does break strict-aliasing rules
+ fsl_sata.c:586: warning: dereferencing pointer 'cfis' does break strict-aliasing rules
+ fsl_sata.c:579: warning: dereferencing pointer 'cfis' does break strict-aliasing rules
+ ...
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 20938e54a207472a090f04f20f30c9e32b14137e
+Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
+Date: Tue Jul 7 15:58:51 2009 +0200
+
+ Add unaligned.h for arm
+
+ This patch adds unaligned.h for ARM (needed to build with LZO
+ compression). The file is taken from the linux kernel, but includes
+ u-boot headers instead.
+
+ Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 433ea8abd6adfae3138dd4ce238237a037e1e537
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sun Jul 19 19:17:42 2009 -0500
+
+ Remove last remanants of unused CONFIG_I2C_CMD_TREE
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit f6ca3b70949790ab5438d6c9a592216cc3616110
+Author: Andrzej Wolski <awolski@poczta.fm>
+Date: Fri Jul 17 22:26:54 2009 +0200
+
+ ubi: help message correction
+
+ Fix incorrect information about size units and correct typo.
+
+ Signed-off-by: Andrzej Wolski <awolski@poczta.fm>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 22f2017c31bc682e9b15612a5c2580ab5b84418e
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sun Jul 19 19:17:42 2009 -0500
+
+ Remove last remanants of unused CONFIG_I2C_CMD_TREE
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit f99a292aa6083057f5db8283d2ce4a2be22b8856
+Author: Andrzej Wolski <awolski@poczta.fm>
+Date: Fri Jul 17 22:26:54 2009 +0200
+
+ ubi: help message correction
+
+ Fix incorrect information about size units and correct typo.
+
+ Signed-off-by: Andrzej Wolski <awolski@poczta.fm>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b86b85e2611d57d834795a92453431a1a340c3c9
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Mon Jun 29 17:53:16 2009 +0400
+
+ mmc: set bus width to 1 and clock to minimum early during initialization
+
+ We need to switch back to 1-bit before initialization or SD 2.0 cards
+ will fail to send SCR if we've switched to 4-bit already.
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit cff80f2cd12bf9767509b5334ecfc90cd7de5502
+Author: Shinya Kuribayashi <skuribay@pobox.com>
+Date: Sat Jun 20 19:14:33 2009 +0900
+
+ config.mk: Remove unused HPATH
+
+ This variable is not unused anywhere.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
+
+commit a781de12700e2cb3d3011fc83b47f7dd8cc3c154
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Wed Jun 17 16:20:14 2009 +0200
+
+ digsy mtc: Enable command line history.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 37566090766d61beef70c62986b90749920255d8
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Jul 2 19:23:25 2009 -0400
+
+ compiler.h: unify system ifdef cruft here
+
+ Shove a lot of the HOSTCC and related #ifdef checking crap into the new
+ compiler.h header so that we can keep all other headers nice and clean.
+
+ Also introduce custom uswap functions so we don't have to rely on the non
+ standard implementations that a host may (or may not in the case of OS X)
+ provide. This allows mkimage to finally build cleanly on an OS X system.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2a2ed845c085eb093b69fa6382fcf7534bb1f4b0
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Mon Jun 15 11:50:40 2009 -0500
+
+ common: fix 'dummy' is used uninitialized in this function warning
+
+ fix this gcc 4.4 warning:
+
+ xyzModem.c: In function 'xyzModem_stream_open':
+ xyzModem.c:564: warning: 'dummy' is used uninitialized in this function
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 1ea6bcd8590b3ff9fe2bfbb0eb29a3b0edaa9460
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 14 23:33:14 2009 -0400
+
+ push CROSS_COMPILE out to $(ARCH)_config.mk
+
+ Each arch should handle setting a proper default CROSS_COMPILE value in
+ their own config.mk file rather than having to maintain a large ugly list
+ in the Makefile. By using conditional assignment, we don't have to worry
+ about the variable already being set (env/cmdline/etc...).
+
+ The common config.mk file takes care of exporting CROSS_COMPILE already,
+ and while a few variables (toolchain ones) utilize CROSS_COMPILE before
+ including the arch config.mk, they do so with deferred assignment.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 60a3f404acbf8238a3138fe1f80a6bac75da4582
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jun 13 12:55:37 2009 +0200
+
+ malloc.h: protect it against multiple include
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7640f41988a456a0b1f05263d2e2dc5cd7d93984
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jul 19 19:37:24 2009 +0200
+
+ Fix boards broken after removal of legacy NAND and DoC support
+
+ Commit 2419169f removed support for legacy NAND and disk on chip but
+ missed to update the code for a few boards. This patch fixes the
+ resulting build issues.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 1a4664b53aaf23687b52d64b94be06a9aa260b86
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jul 19 19:32:37 2009 +0200
+
+ cmd_flash.c: fix fix compile error for boards with DataFlash
+
+ Commit 5669ed45 ("cmd_flash.c: fix warning: unused variable
+ 'addr_first'/'addr_last'") changed the #ifdef logic areound the
+ declaration of these variables and missed a combination of settings
+ of HAS_DATAFLASH with SYS_NO_FLASH; this patch fixes this.
+
+ Also spotted by Alessandro Rubini <rubini@gnudd.com>
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 341245a28830d3261c41b09d958eeea7bb93587a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jul 19 12:05:15 2009 +0200
+
+ pcm030: fix out-of-tree building
+
+ Commit 0a87dd90 that was supposed to fix out-of-tree building for the
+ pcm030 board was unfortunately incomplete.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8bf29b59fce8cc381114929082202d800e313ad5
+Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
+Date: Tue Jul 7 13:58:51 2009 +0200
+
+ Add unaligned.h for arm
+
+ This patch adds unaligned.h for ARM (needed to build with LZO
+ compression). The file is taken from the linux kernel, but includes
+ u-boot headers instead.
+
+ Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit e405afab1dda66c9df3733f6b779d72fc36a0162
+Author: Kazuaki Ichinohe <kazuichi@fsi.co.jp>
+Date: Fri Jun 12 18:10:12 2009 +0900
+
+ Canyonlands SATA harddisk driver
+
+ This patch adds a SATA harddisk driver for the canyonlands.
+ This patch is kernel driver's porting.
+ This patch corresponded to not cmd_scsi but cmd_sata.
+ This patch divided an unused member with ifndef __U_BOOT__ in the structure.
+
+ [environment variable, boot script]
+ setenv bootargs root=/dev/sda7 rw
+ setenv bootargs ${bootargs} console=ttyS0,115200
+ ext2load sata 0:2 0x400000 /canyonlands/uImage
+ ext2load sata 0:2 0x800000 /canyonlands/canyonlands.dtb
+ fdt addr 0x800000 0x4000
+ bootm 0x400000 - 0x800000
+
+ If you drive SATA-2 disk on Canyonlands, you must change parts from
+ PI2PCIE212 to PI2PCIE2212 on U25. We confirmed to boot by using
+ following disks:
+
+ 1.Vendor: Fujitsu Type: MHW2040BS
+ 2.Vendor: Fujitsu Type: MHW2060BK
+ 3.Vendor: HAGIWARA SYS-COM:HFD25S-032GT
+ 4.Vendor: WesternDigital Type: WD3200BJKT (CONFIG_LBA48 required)
+ 5.Vendor: WesternDigital Type: WD3200BEVT (CONFIG_LBA48 required)
+ 6.Vendor: Hitachi Type: HTS543232L9A300 (CONFIG_LBA48 required)
+ 7.Vendor: Seagate Type: ST31000333AS (CONFIG_LBA48 required)
+ 8.Vendor: Transcend Type: TS32GSSD25S-M
+ 9.Vendor: MTRON Type: MSD-SATA1525-016
+
+ Signed-off-by: Kazuaki Ichinohe <kazuichi at fsi.co.jp>
+
+commit 52a0e2dee90c17e39634de814b16b96061cfb472
+Author: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+Date: Wed Jun 10 19:09:40 2009 +0200
+
+ Add support for the Tundra TSI148 VME-bridge
+
+ From: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+
+ This patch adds support for the Tundra TSI148 VME-bridge. It's used on
+ the upcoming esd VME8349 board.
+
+ Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8d1fea2c4041e665c96944e3f6fcffbde55db34b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Jul 16 19:05:30 2009 -0400
+
+ Blackfin: bf537-{minotaur,srv1}: do not hardcode CONFIG_ETHADDR
+
+ MAC addresses should not be hardcoded in boards to avoid random link level
+ conflicts.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit baf357050353aee30c04f3f4b868426cb54468ca
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Jul 10 10:42:06 2009 -0400
+
+ Blackfin: bf533-stamp: back down SCLK a bit
+
+ While the 1.0 and 1.2 spin of the bf533-stamp boards can handle the higher
+ SCLK speeds just fine, the 1.1 spin cannot due to the bugs introduced with
+ the shortened SDRAM traces. So lower the SCLK speed down to a value that
+ all three can handle.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 490fe7349102012c48730f6fc14ef36c8d155068
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Jul 9 20:56:56 2009 -0400
+
+ Blackfin: split cpu COBJS into multilines
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 909878fd3fda056d19b8b51a5cc51cb1c0b563d1
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Jul 9 01:15:05 2009 -0400
+
+ Blackfin: add os log functions
+
+ Part of the mini Blackfin ABI with operating systems is that they can use
+ 0x4f0-0x4f8 to pass log buffers to/from bootloaders. So add support to
+ U-Boot for reading the log buffer.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 9993e196da707a0a1cd4584f1fcef12382c1c144
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Sat Jul 18 18:42:13 2009 -0500
+
+ mpc83xx: convert all remaining boards over to 83XX_GENERIC_PCI
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit d39041fcadb1231430201d298c31f6be03d654f7
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jul 19 01:15:52 2009 +0200
+
+ PATI board: fix compiler warnings
+
+ Fix these:
+ pati.c: In function 'checkboard':
+ pati.c:358: warning: pointer targets in passing argument 2 of 'getenv_r' differ in signedness
+ ../common/flash.c: In function 'write_word':
+ ../common/flash.c:824: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ cmd_pati.c: In function 'do_pati':
+ cmd_pati.c:279: warning: 'value' may be used uninitialized in this function
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 28c345042eafc550a34b9f52431bd4a22af6ac25
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat May 16 12:14:56 2009 +0200
+
+ mpl: printing current stdio devices cleanup
+
+ Currently the mpl boards duplicate the code to print the current
+ devices from common/console.c; use stdio_print_current_devices()
+ instead
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+ Edited commit message.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 7e3be7cf3bb344f717b6ec3d47a081269ea67ead
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat May 16 12:14:55 2009 +0200
+
+ console: unify printing current devices
+
+ Create stdio_print_current_devices() for this purpose
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 5669ed4557edf2714203aa8625c9fcd5a753b338
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jul 18 23:18:14 2009 +0200
+
+ cmd_flash.c: fix warning: unused variable 'addr_first'/'addr_last'
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6bb6e6c75ec4ef496f00f7f530e549d3e073c5de
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Tue Jun 30 15:04:13 2009 -0500
+
+ OMAP3 Fix compiler warning for v7_flush_dcache_all
+
+ On build of omap3 targets in MAKEALL, the *.ERR files have
+
+ cpu.c: In function 'cleanup_before_linux':
+ cpu.c:64: warning: implicit declaration of function 'v7_flush_dcache_all'
+ cpu.c:64: warning: implicit declaration of function 'get_device_type
+
+ The functions v7_flush_dcache_all and get_device_type are declared
+ in include/asm-arm/arch-omap3/sys_proto.h, so use this file to
+ declare the functions.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit dba107b967332fc8a35867f4d58038626c968800
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jul 18 22:09:38 2009 +0200
+
+ ARM: make split_by_variant.sh output more useful
+
+ The board/armltd/integrator/split_by_variant.sh script used to print
+ "Configuring for integrator*p board..." no matter which board name
+ was being compiled. This made it difficult to match MAKEALL output to
+ board names. This patch fixes this.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2eb99ca8029b44c988d5f6312f97e68d3b9cb2bd
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jul 18 21:52:24 2009 +0200
+
+ NAND: Part 2: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
+
+ Commit 8d2effea added a warning for configurations that use NAND
+ without defining the (then necessary) CONFIG_SYS_64BIT_VSPRINTF but
+ failed to fix the affected boards.
+
+ This patch covers the non-PPC boards that were missed in the previous
+ patch (commit 170c1972).
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 7024aa14df2981b4e65c6189909da9aadb1c22da
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jul 18 20:46:38 2009 +0200
+
+ at91cap9adk: fix #ifdef/#endif pairing
+
+ The #ifdef/#endif pairing in this file was obviously messed up.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4abc5bffea244589fa1097e4c899a63efc609c8e
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Thu Jul 16 20:58:01 2009 +0530
+
+ Marvell MV88F6281GTW_GE Board support
+
+ This is Marvell's 88F6281_A0 based custom board developed
+ for wireless access point product
+
+ This patch is tested for-
+ 1. Boot from DRAM/SPI flash/NFS
+ 2. File transfer using tftp and loadb
+ 3. SPI flash read/write/erase
+ 4. Booting Linux kernel and RFS from SPI flash
+ 5. Boot from USB supported
+
+ Reviewed-by: Ronen Shitrit <rshitrit@marvell.com>
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+commit 55dd4ba5413b14e8ee24058c89ac5c05376c331c
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Thu Jul 16 20:58:00 2009 +0530
+
+ Marvell Sheevaplug Board support
+
+ Reference:
+ http://plugcomputer.org/
+ http://openplug.org/plugwiki/index.php/Das_U-boot_plug_support
+
+ This patch is tested for-
+ 1. Boot from DRAM/NAND flash
+ 2. File transfer using tftp
+ 3. NAND flash read/write/erase
+ 4. Linux kernel and RFS Boot from NAND
+ 5. Enabled USB PHY init for kernel need
+ 6. Boot from USB supported
+
+ Note: to boot Kirkwood kernel with USB support,
+ you should add "usb start" in the boot sequence
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+commit 0a87dd90a75d034301496285026fbd8106c7c6d5
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jul 18 18:00:25 2009 +0200
+
+ pcm030: fix out-of-tree building
+
+ Commit c9969947, which added support for the pcm030 board
+ (aka phyCORE-MPC5200B-tiny), broke out-of-tree building.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9ff59601c71e800b9d0dfde22fa70d12c71c12b4
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jul 18 16:36:11 2009 +0200
+
+ MPC837XERDB: fix warning: "CONFIG_SYS_MONITOR_LEN" redefined
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2b5243fc24a724e83409c0b70caa1a3180e997ae
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jul 18 16:13:18 2009 +0200
+
+ 8xxx: fix warning: implicit declaration of function 'uec_standard_init'
+
+ Commit 8e55258f created function uec_standard_init() to initialize
+ all UEC interfaces for 83xx and 85xx but failed to provide a
+ prototype for it.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5b54df2674fdad5e7d316484c67efc68e79f3f0d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jul 18 15:46:02 2009 +0200
+
+ MIP405T: fix compile problem
+
+ The "stdio/device: rework function naming convention" patch
+ (commit 52cb4d4f) broke the MIP405T board; this patch fixes it.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 170c19725ecd3a0e2e517dfd49979ca8822edec0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jul 18 15:32:10 2009 +0200
+
+ NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
+
+ Commit 8d2effea added a warning for configurations that use NAND
+ without defining the (then necessary) CONFIG_SYS_64BIT_VSPRINTF but
+ failed to fix the affected boards.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6e897a661fb9968ce354165a12cce82e4b889e04
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jul 18 15:05:44 2009 +0200
+
+ CPCI750: fix compile problem
+
+ Commit bc0d3296 removed ppc_error_no.h from Marvell boards
+ but forgot to update board/esd/cpci750/mv_eth.h
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6aee3048348f1b19ab89156da98bfa4f7babf24b
+Author: Alessandro Rubini <rubini-list@gnudd.com>
+Date: Fri Jul 17 14:42:11 2009 +0200
+
+ cmd_i2c: bugfix: add missing brace
+
+ The sub-command parser missed a brace, so "return 0;" is always
+ taken and no error message is diplayed if you say "i2c scan"
+ instead of "i2c probe", for example.
+
+ Proper brace is added. Also, a misleading and unneeded else
+ is removed.
+
+ Signed-off-by: Alessandro Rubini <rubini@gnudd.com.it>
+
+commit 52cb4d4fb3487313f5a72ea740f527a4aefaa365
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat May 16 12:14:54 2009 +0200
+
+ stdio/device: rework function naming convention
+
+ So far the console API uses the following naming convention:
+
+ ======Extract======
+ typedef struct device_t;
+
+ int device_register (device_t * dev);
+ int devices_init (void);
+ int device_deregister(char *devname);
+ struct list_head* device_get_list(void);
+ device_t* device_get_by_name(char* name);
+ device_t* device_clone(device_t *dev);
+ =======
+
+ which is too generic and confusing.
+
+ Instead of using device_XX and device_t we change this
+ into stdio_XX and stdio_dev
+
+ This will also allow to add later a generic device mechanism in order
+ to have support for multiple devices and driver instances.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+ Edited commit message.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f732a7598fa36d48241df20b1a1f4cdbf09f75ee
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Jul 15 00:01:08 2009 -0500
+
+ ppc: Fix compile error for boards with CONFIG_DDR_ECC
+
+ A bug was introduced by commit e94e460c6e8741f42dab6d8dd4b596ba5d9d79ae
+ which affected non-MPC83xx/85xx/86xx ppc boards which had CONFIG_DDR_ECC
+ defined and resulted in errors such as:
+
+ Configuring for canyonlands board...
+ fsl_dma.c:50:2: error: #error "Freescale DMA engine not supported on your
+ processor"
+ make[1]: *** No rule to make target `.depend', needed by `libdma.a'. Stop.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 18e067de9b6ed087fa60496e64887f0b7458dbaa
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Thu Jul 16 20:57:59 2009 +0530
+
+ include/config_cmd_default.h cleanup
+
+ arranged configurations in alphabetical order
+ CONFIG_CMD_FLASH moved under ifndef CONFIG_SYS_NO_FLASH
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+commit 569460ebf14b87bd8fdb2352bde95d35ee96e13b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 14 21:35:22 2009 -0400
+
+ sata: namespace curr_device variable
+
+ The curr_device variable really should be namespaced with a "sata_" prefix
+ since it is only used by the sata code. It also avoids random conflicts
+ with other pieces of code (like cmd_mmc):
+ common/libcommon.a(cmd_sata.o):(.data.curr_device+0x0):
+ multiple definition of `curr_device'
+ common/libcommon.a(cmd_mmc.o):(.data.curr_device+0x0): first defined here
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 02e22c2de1ce2312f2636fa473a60c8d8f18d8aa
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 14 21:35:21 2009 -0400
+
+ cmd_mmc: make curr_device static
+
+ The curr_device variable isn't used outside of cmd_mmc, so mark it static
+ to avoid conflicts with other pieces of code (like sata which also exports
+ a curr_device). Otherwise we end up with stuff like:
+ common/libcommon.a(cmd_sata.o):(.data.curr_device+0x0):
+ multiple definition of `curr_device'
+ common/libcommon.a(cmd_mmc.o):(.data.curr_device+0x0): first defined here
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2d8d2adde3fce1152e4ad9f47238f07e70793c53
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 14 21:35:16 2009 -0400
+
+ envcrc: add missing dependencies on env storage
+
+ When the envcrc building was made conditional, it missed a bunch of env
+ storage types, so add all currently supported types.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2419169f5749d7af501b3b77a5336d1d535320de
+Author: Scott Wood <scottwood@freescale.com>
+Date: Thu Jul 16 19:08:04 2009 -0500
+
+ Remove legacy NAND and disk on chip references from boards.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 12e9043c7ed961b60df865f45d9a3c74d6a38199
+Author: Shinya Kuribayashi <skuribay@pobox.com>
+Date: Sat Jun 20 19:10:14 2009 +0900
+
+ config.mk: Remove $(PCI_CLOCK) reference
+
+ The following commit introduced $(PCI_CLOCK) reference so that
+ we could tweak `PCI_66M' definition via an environment variable.
+
+ > commit f046ccd15c8bc9613bfd72916b761a127d36e5c6
+ > Author: Eran Liberty <liberty@freescale.com>
+ > Date: Thu Jul 28 10:08:46 2005 -0500
+ >
+ > * Patch by Eran Liberty
+ > Add support for the Freescale MPC8349ADS board.
+
+ But I suggest a removal of it for the following reasons:
+
+ * In 2006, MPC8349ADS was merged into MPC8349EMDS port,
+ and it seems that MPC8349EMDS port is PCI_66M free.
+
+ * OTOH, PCI_66M is used by MPC832XEMDS an MPC8360EMDS ports,
+ but they don't need $(PCI_CLOCK) environment variable at all.
+ PCI_66M is automatically configured via $(BOARD)_config names
+ with the help of $(findstring _66_,$@).
+
+ * Unfortunately $(PCI_CLOCK) has been undocumented anywhere,
+ so only a few people know the existence of it these days.
+
+ * Keep config.mk independent from $(BOARD) as much as possible.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 3db75d9c11d37cc1d28bebd91b19f4e548b68155
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat May 23 21:42:36 2009 +0200
+
+ fix: missing autoconfig.mk from general Makefile
+
+ At the first run of make we generate the autoconf.mk and
+ autoconf.mk.dep if not already the case and we currently include only
+ to .dep
+
+ In order to use these autogenerated values we need to include it also
+ even if it's included in config.mk but it's done before their
+ generation
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 1ca298ced07327749b54321815f76fcddb2f9479
+Author: Matthias Weisser <matthias.weisser@graf-syteco.de>
+Date: Thu Jul 9 16:07:30 2009 +0200
+
+ Added support for splash screen positioning
+
+ This patch adds support splash image positioning by adding an
+ additional variable "splashpos" to the environment. Please see
+ README for details.
+
+ Signed-off-by: Matthias Weisser <matthias.weisser@graf-syteco.de>
+ Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 9d173e0233493113c9b1aa81bd2208d0057ab9db
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Tue Jul 7 13:11:36 2009 +0200
+
+ video: mb862xx: replace printf with puts
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit cce99b2a7dd80683d61360aee56a6ece344950b2
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Tue Jul 7 13:27:07 2009 +0200
+
+ video: mb862xx: use macros instead of magic numbers
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit e86528671ece6d5c1162656a37fc68a8e0bf67f8
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Tue Jul 7 13:24:08 2009 +0200
+
+ video: mb862xx: fix coding style and remove dead code
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 292ed489dba8cc97b458579003a8001cd4703cd8
+Author: Michal Simek <monstr@monstr.eu>
+Date: Tue Jun 30 12:03:50 2009 +0200
+
+ microblaze: Remove ignored return type for __arch__swab16 function
+
+ This change remove compilation warnings.
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit e2776587c0eac131954ae100fda89cc3e7ed8b57
+Author: Michal Simek <monstr@monstr.eu>
+Date: Tue Jun 30 12:02:45 2009 +0200
+
+ microblaze: Removed unused variables
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit be33b046b549ad88c204c209508cd7657232ffbd
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Apr 1 15:02:13 2009 -0500
+
+ Remove legacy NAND and disk on chip code.
+
+ Legacy NAND had been scheduled for removal. Any boards that use this
+ were already not building in the previous release due to an #error.
+
+ The disk on chip code in common/cmd_doc.c relies on legacy NAND,
+ and it has also been removed. There is newer disk on chip code
+ in drivers/mtd/nand; someone with access to hardware and sufficient
+ time and motivation can try to get that working, but for now disk
+ on chip is not supported.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit fbdaafaee71e2c7f2c31b3582ab6d8679efee8d3
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jun 4 16:40:36 2009 +0200
+
+ nand: Change NAND_MAX_OOBSIZE to 218 as needed for some 4k page devices
+
+ This is needed for the MPC512x NAND driver (fsl_nfc_nand.c) which already
+ defines such a 4k plus 218 bytes ECC layout.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Scott Wood <scottwood@freescale.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit f2f376ab956c17d4a0c42a993133ca25cdc87278
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jul 16 15:13:04 2009 +0200
+
+ nand: ndfc: Remove unnecessary #ifdef's
+
+ Now that the 4xx NAND driver ndfc is moved to the common NAND driver
+ directory we don't need this #ifdef's anymore.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Scott Wood <scottwood@freescale.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 12582ac771b0bf3852817c3bfa4be326522a0665
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jul 16 15:12:48 2009 +0200
+
+ nand/ppc4xx: Move PPC4xx NAND driver to common NAND driver directory
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Scott Wood <scottwood@freescale.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 3ebf70db5452d3d47c316ddef09f40e76553bcba
+Author: Valeriy Glushkov <gvv@lstec.com>
+Date: Tue Jul 14 13:51:10 2009 +0300
+
+ nand: fixed failed reads on corrected ECC errors in nand_util.c
+
+ Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
+ Signed-off-by: Paulraj, Sandeep <s-paulraj@ti.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit ed727d394c5ab139033719772dc95dc25cfa14f7
+Author: David Brownell <david-b@pacbell.net>
+Date: Mon Jul 13 16:29:04 2009 -0700
+
+ Typo fix: use CONFIG_SOC_DM644X, not CONFIG_SOC_DM646.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 937076f84c5064f0a79105fce352ac7cf7b33643
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Sat Jul 11 16:49:55 2009 +0900
+
+ MTD: OneNAND: Increase the environment size to 4KiB
+
+ Also use mtd operation instead of onenand functions
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit bfadb17f69c256196620c32164775f063a59c34f
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Wed Jun 10 00:25:38 2009 +0400
+
+ mpc83xx: MPC837xEMDS: Use hwconfig instead of pci_external_arbiter variable
+
+ Since we have simple hwconfig interface now, we don't need
+ pci_external_arbiter variable any longer.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit b8b71ffbc35fde6905e65ffdbf4e4b87efc26b7e
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Wed Jun 10 00:25:36 2009 +0400
+
+ mpc83xx: MPC8315ERDB: Use hwconfig for board type selection
+
+ This patch simply converts the board to the hwconfig infrastructure.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit c78c678354c8321737aa07e86831ff14176f4ed5
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Wed Jun 10 00:25:31 2009 +0400
+
+ mpc83xx: MPC837XEMDS: Fixup eSDHC nodes in device tree
+
+ fdt_fixup_esdhc() will either disable or enable eSDHC nodes, and
+ also will fixup clock-frequency property.
+
+ Plus, since DR USB and eSDHC are mutually exclusive, we should
+ only configure the eSDHC if asked through hwconfig.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit c9646ed758804fa1fa6c1425369a4eee5d618b1d
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Wed Jun 10 00:25:30 2009 +0400
+
+ mpc83xx: MPC837XERDB: Add support for FSL eSDHC
+
+ This patch adds support for eSDHC on MPC837XERDB boards. The WP
+ switch doesn't seem to work on RDB boards though, the WP pin is
+ always asserted (can see the pin state when it's in GPIO mode).
+
+ FSL DR USB and FSL eSDHC are mutually exclusive because of pins
+ multiplexing, so user should specify 'esdhc' or 'dr_usb' options
+ in the hwconfig environment variable to choose between the
+ devices.
+
+ p.s.
+ Now we're very close to a monitor len limit (196 bytes left using
+ gcc-4.2.0), so also increase the monitor len by one sector (64 KB).
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit b33433a63fe08c9e723ea15a7c7c7143bf527c6d
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Wed Jun 10 00:25:29 2009 +0400
+
+ fsl_esdhc: Add device tree fixups
+
+ This patch implements fdt_fixup_esdhc() function that is used to fixup
+ the device tree.
+
+ The function adds status = "disabled" propery if esdhc pins muxed away,
+ otherwise it fixups clock-frequency for esdhc nodes.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 93f9dcf9e8b8182e97aeb7965c687176cbd0b933
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Wed Jun 10 00:25:27 2009 +0400
+
+ Add simple hwconfig infrastructure
+
+ This patch implements simple hwconfig infrastructure: an
+ interface for software knobs to control a hardware.
+
+ This is very simple implementation, i.e. it is implemented
+ via `hwconfig' environment variable. Later we could write
+ some "hwconfig <enable|disable|list>" commands, ncurses
+ interface for Award BIOS-like interface, and frame-buffer
+ interface for AMI GUI[1] BIOS-like interface with mouse
+ support[2].
+
+ Current implementation details/limitations:
+
+ 1. Doesn't support options dependencies and mutual exclusion.
+ We can implement this by integrating apt-get[3] into the
+ u-boot. But I didn't bother yet.
+
+ 2. Since we don't implement hwconfig command, i.e. we're working
+ with the environement directly, there is no way to tell that
+ toggling a particular option will need a reboot to take
+ an effect. So, for now it's advised to always reboot the
+ target after modifying hwconfig variable.
+
+ 3. We support hwconfig options with arguments. For example,
+
+ set hwconfig dr_usb:mode=peripheral,phy_type=ulpi
+
+ That means:
+ - dr_usb - enable Dual-Role USB controller;
+ - dr_usb:mode=peripheral - USB in Function mode;
+ - dr_usb:phy_type=ulpi - USB should work with ULPI PHYs;
+
+ The purpose of this simple implementation is to define some
+ internal API and then we can continue improving user experience
+ by adding more mature interface, like hwconfig command with
+ bells and whistles. Or not adding, if we feel that current
+ interface fits its needs.
+
+ [1] http://en.wikipedia.org/wiki/American_Megatrends
+ [2] Regarding ncurses and GUI with mouse support -- I'm just
+ kidding.
+ [3] The comment regarding apt-get is also a joke, meaning that
+ dependency tracking could be non-trivial. For example, for
+ enabling HW feature X we may need to disable Y, and turn Z
+ into reduced mode (like RMII-only interface for ethernet,
+ no MII).
+
+ It's quite trivial to implement simple cases though.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 6c3fef28b9fff0d7f3fa4c51c3ee0ae8c2a3b043
+Author: Jerry Van Baren <gvb.uboot@gmail.com>
+Date: Wed Jul 15 20:42:59 2009 -0400
+
+ Improve U-Boot Porting Guide in the README
+
+ Update for...
+ * BDI2000 -> BDI3000 (BDI2000 is obsolete).
+ * Add a line to read the doc/README.* files
+ * Fix coding standard violations
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 9578718c1b085cac73017d834001bc5cb0b2f73f
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Jul 14 16:00:24 2009 -0500
+
+ mtd: cfi - if defined, use MAX_FLASH_BANKS_DETECT for static declarations
+
+ a.k.a cfi_mtd.c does as cfi_flash.c does. This also prevents
+ the TQM834x build from doing a:
+
+ cfi_mtd.c:36: error: variably modified 'cfi_mtd_info' at file scope
+ cfi_mtd.c:37: error: variably modified 'cfi_mtd_names' at file scope
+
+ using gcc 4.4.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4a9932a4364b548773bc131bf85e24a2ec15f2b0
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Jul 7 18:04:21 2009 -0500
+
+ mpc83xx: increase MONITOR_LEN to offset growing pains
+
+ Saving the environment leads to overwriting u-boot itself,
+ bricking boards. Increase u-boot's image size so the environment
+ base address doesn't end up overlapping u-boot text.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit c31e13260bcd048a94412a47b004386ea6112acf
+Author: Valeriy Glushkov <gvv@lstec.com>
+Date: Tue Jun 30 15:48:41 2009 +0300
+
+ usb: mpx8349itx: added support of loading images from USB storage (MPH/DR)
+
+ Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit d89e1c36891de793a20a929282acc0fc7b98feac
+Author: Valeriy Glushkov <gvv@lstec.com>
+Date: Tue Jun 30 15:48:40 2009 +0300
+
+ usb: mpc834x: added support of the MPH USB controller in addition to the DR one
+
+ Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit d9ac3d5a17ecef0beb70073018925e011b11684e
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Mon Jun 15 11:51:47 2009 -0500
+
+ mpc83xx: set 64BIT_VSPRINTF for boards using nand_util
+
+ When enabling NAND support for a board, one must also define
+ CONFIG_SYS_64BIT_VSPRINTF because this is needed in nand_util.c
+ for correct output.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+ Cc: Dave Liu <daveliu@freescale.com>
+ Cc: Ron Madrid <ron_madrid@sbcglobal.net>
+ Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 052c08916532d1d9c2f69eb9229709c7b2fc1f02
+Author: TsiChung Liew <tsicliew@gmail.com>
+Date: Wed Jul 8 07:41:24 2009 +0000
+
+ ColdFire: Update bootargs
+
+ Add a bootargs for M53017EVB and update bootargs
+ for M54451EVB
+
+ Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
+
+commit 6e8d58d36691520f8da74cd948661d28d5a5dc66
+Author: TsiChung Liew <tsicliew@gmail.com>
+Date: Tue Jun 30 14:30:19 2009 +0000
+
+ Command for accessing serial flash update
+
+ Change strtoul number base of argv 3 from 0 to 16
+
+ Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
+
+commit ee0a8462466dd284968536eb57c6eef4be0d6aad
+Author: TsiChung Liew <tsicliew@gmail.com>
+Date: Tue Jun 30 14:18:29 2009 +0000
+
+ ColdFire: Add DSPI support for MCF5227x and MCF5445x
+
+ Remove individual CPU specific DSPI driver.
+ Add required feature for the common DSPI driver in cpu_init and
+ in platform configuration file.
+
+ Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
+
+commit dec61c7851baa72151ef1d3657e7bb3b68907d48
+Author: TsiChung Liew <tsicliew@gmail.com>
+Date: Tue Jun 30 14:09:47 2009 +0000
+
+ Coldfire: Consolidate DSPI driver
+
+ Unify both MCF5227x and MCF5445x DSPI driver in CPU to
+ driver/spi folder for common use.
+
+ Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
+
+commit 11d88b26a68bd4bf98b1c962fde6257a50978231
+Author: TsiChung Liew <tsicliew@gmail.com>
+Date: Fri Jun 12 13:03:34 2009 +0000
+
+ ColdFire: Remove compiler warning messages
+
+ Remove unused variables and printf type mismatch in
+ lib_m68k/board.c
+
+ Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
+
+commit 4567c7bff2503fb1a7c738ff9b9f0bd00d274d9a
+Author: TsiChung Liew <tsicliew@gmail.com>
+Date: Fri Jun 12 11:31:31 2009 +0000
+
+ ColdFire: Fix M53017EVB flash size
+
+ Increase the flash size from 8MB to 16MB
+
+ Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
+
+commit bf9a521529e484b15e8fdb583a607cf7945d2f6b
+Author: TsiChung Liew <tsicliew@gmail.com>
+Date: Fri Jun 12 11:29:00 2009 +0000
+
+ ColdFire: Add M5208EVB and MCF520x CPU support
+
+ Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
+
+commit 709b384b6493d9726dce20663ebe31bf7cab2925
+Author: TsiChung Liew <tsicliew@gmail.com>
+Date: Thu Jun 11 15:39:57 2009 +0000
+
+ ColdFire: Update for M54451EVB
+
+ Update serial boot DRAM's Internal RAM, vector table and DRAM in
+ start.S, serial flash's read status command over SPI and NOR
+ flash.
+
+ Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
+
+commit bbf6bbffcaf694c03504c661e58fbd1aefe5bf64
+Author: TsiChung Liew <tsicliew@gmail.com>
+Date: Thu Jun 11 12:50:05 2009 +0000
+
+ ColdFire: Update configuration file to use flash buffer write
+
+ Update M52277EVB, M53017EVB and M54455EVB platform configuration
+ file to use flash buffer write
+
+ Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
+
+commit 7d4450a9773673052fcd7fdf0a4a88c089126ac1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jun 14 20:58:53 2009 +0200
+
+ mpc5121ads: add JFFS2 and MTDPARTS support; adjust flash map
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 1f1f82f3de1660f398bf42bfd709b9859582ce5e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jun 14 20:58:52 2009 +0200
+
+ aria: add JFFS2 and MTDPARTS support; adjust flash map
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a6d6d46a4fef876455e11b45ed699c0fb3bd1ca1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jun 14 20:58:51 2009 +0200
+
+ aria: enable NAND flash support
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 13946925e850db5351982acb691d51716fc754e2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jun 14 20:58:50 2009 +0200
+
+ MPC512x: fix typo in comment listing the NAND driver name
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Stefan Roese <sr@denx.de>
+ Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+
+commit 2ca6f74d09653f8041b52cafd0d650fdc2a56c51
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jun 14 20:58:49 2009 +0200
+
+ mecp5123: cleanup - remove dead code
+
+ Remove dead code that was obviously a left-over from copy & paste.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Stefan Roese <sr@denx.de>
+ Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+
+commit 25671c8672f2d7b39555416a6b7a6b7b39b810bf
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jun 14 20:58:48 2009 +0200
+
+ aria: adjust memory controller initialization
+
+ Needed for Rev. 2 silicon at 400 MHz
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 7629f1c06b6dea36bbc7bf70820b824e9b6d2227
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jun 14 20:58:47 2009 +0200
+
+ MPC512x: factor out common code
+
+ Now that we have 3 boards for the MPC512x it turns out that they all
+ use the very same fixed_sdram() code.
+
+ This patch factors out this common code into cpu/mpc512x/fixed_sdram.c
+ and adds a new header file, include/asm-ppc/mpc512x.h, with some
+ macros, inline functions and prototype definitions specific to MPC512x
+ systems.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Stefan Roese <sr@denx.de>
+ Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+
+commit 0549353a6ba5aa03420c0962b9072e9cf1fa49d9
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jun 14 20:58:46 2009 +0200
+
+ mecp5123: fix build error
+
+ The mecp5123 board did not compile because the MSCAN Clock Control
+ Registers were missing; these got added, but as an array instead
+ of 4 individual registers. Adapt the code so it builds.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Stefan Roese <sr@denx.de>
+ Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+
+commit a9905db5d29a56aedd7db5bcb56b0385873aa6a3
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jun 14 20:58:45 2009 +0200
+
+ MPC512x: Add MSCAN1...4 Clock Control Registers
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Stefan Roese <sr@denx.de>
+ Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+
+commit f5489c4200b37c9a1d6dbde116f5adc0539610de
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jun 14 20:58:44 2009 +0200
+
+ MPC512x: enabling NAND support requires CONFIG_SYS_64BIT_VSPRINTF
+
+ When enabling NAND support for a board, one must also define
+ CONFIG_SYS_64BIT_VSPRINTF because this is needed in nand_util.c
+ for correct output.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Stefan Roese <sr@denx.de>
+ Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+
+commit b4db4a7638ef90cf0aacf7b954d9bf3043dda780
+Author: Po-Yu Chuang <ratbert@faraday-tech.com>
+Date: Fri Jul 10 18:03:57 2009 +0800
+
+ issue write command to base for JEDEC flash
+
+ For JEDEC flash, we should issue word programming command relative to
+ base address rather than sector base address. Original source makes
+ SST Flash fails to program sectors which are not on the 0x10000 boundaries.
+
+ e.g.
+ SST39LF040 uses addr1=0x5555 and addr2=0x2AAA, however, each sector
+ is 0x1000 bytes.
+
+ Thus, if we issue command to "sector base (0x41000) + offset(0x5555)",
+ it sends to 0x46555 and the chip fails to recognize that address.
+
+ This patch is tested with SST39LF040.
+
+ Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 986922714ffd21ad39f48522d285fffc7aed56b1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat May 2 11:53:50 2009 +0200
+
+ versatile: update config and merge to cfi flash driver
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Peter Pearse <peter.pearse@arm.com>
+ Cc: Catalin Marinas <catalin.marinas@arm.com>
+
+commit d6e8ed832b25d5db4fdd3fb91e73028e494dcd6e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat May 2 11:53:49 2009 +0200
+
+ versatile: specify the board type on the prompt
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Peter Pearse <peter.pearse@arm.com>
+ Cc: Catalin Marinas <catalin.marinas@arm.com>
+
+commit 5ccc2d99d61c81805348b0cd9f79731b271f7daf
+Author: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+Date: Thu Jun 25 17:04:15 2009 +0200
+
+ at91: Introduction of at91sam9g10 SOC.
+
+ AT91sam9g10 is an ARM 926ej-s SOC. It is an evolution of the at91sam9261 with a
+ faster clock speed: 266/133MHz.
+
+ Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+
+commit 22ee647380c42f44528f99b7c1b423725e542102
+Author: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+Date: Thu Jul 9 10:16:29 2009 +0200
+
+ at91: Introduction of at91sam9g45 SOC.
+
+ AT91sam9g45 series is an ARM 926ej-s SOC family clocked at 400/133MHz.
+ It embeds USB high speed host and device, LCD, DDR2 RAM, and a full set of
+ peripherals.
+
+ The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES.
+ On the board you can find 2 USART, USB high speed,
+ a 480*272 LG lcd, ethernet, gpio/joystick/buttons.
+
+ Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+
+commit c33c5990cec7ced9ef1ef148debbca34adafa12b
+Author: Daniel Mack <daniel@caiaq.de>
+Date: Tue Jun 23 17:30:05 2009 +0200
+
+ pxa: fix CKEN_B register bits
+
+ The current defition for CKEN_B register bits is nonsense. Adding 32 to
+ the shifted value is equal to '| (1 << 5)', and this bit is marked
+ 'reserved' in the PXA docs.
+
+ Signed-off-by: Daniel Mack <daniel@caiaq.de>
+
+commit bd876be46f28b5fc2896537f6d01353f332789f7
+Author: Daniel Mack <daniel@caiaq.de>
+Date: Tue Jun 23 17:30:04 2009 +0200
+
+ pxa: add clock for system bus 2 arbiter
+
+ This clock is needed for systems using the USB2 device unit or the 2d
+ graphics accelerator.
+
+ Signed-off-by: Daniel Mack <daniel@caiaq.de>
+
+commit b016000a95514c08cab50e1cba00b019c0801bc4
+Author: Grazvydas Ignotas <notasas@gmail.com>
+Date: Wed Jul 8 00:30:01 2009 +0300
+
+ OMAP3 pandora: Fix CKE1 MUX setting to allow self-refresh
+
+ Pandora is using both SDRC CSes. The MUX setting is needed
+ for the second CS clock signal to allow the 2 RAM parts to
+ be put in self-refresh correctly.
+
+ Based on similar patch for beagle and overo by
+ Jean Pihet and Steve Sakoman.
+
+commit 8672c288703f3c51c829851c8fe6608c7869faaa
+Author: Grazvydas Ignotas <notasas@gmail.com>
+Date: Wed Jul 8 00:30:00 2009 +0300
+
+ OMAP3 pandora: setup pulls for various GPIOs
+
+ Set pullups or pulldowns for GPIOs which need them.
+ Disable them for others, which have external pulls.
+ Also make disabled pull setting consistent (some pins had
+ type set to "up" even if pull type selection was disabled).
+
+commit 5ff78122f229946862a3f67a2f50a329e8e1bcf5
+Author: Grazvydas Ignotas <notasas@gmail.com>
+Date: Wed Jul 8 00:29:59 2009 +0300
+
+ OMAP3 pandora: setup pin mux for pins used on rev3 boards
+
+ Setup pin mux for GPIO pins connected on rev3 or later
+ boards. Also change NUB2 IRQ pin. This should not affect
+ older boards because they don't have any nubs (analog
+ controllers) attached to them.
+
+commit 67c97c346b27c586a7263564f7afff6d1f8d8d0a
+Author: Grazvydas Ignotas <notasas@gmail.com>
+Date: Wed Jul 8 00:29:58 2009 +0300
+
+ OMAP3 pandora: pin mux cleanup
+
+ Remove configuration of not unused pins, effectively
+ leaving them in safe mode.
+
+commit b996165f5a1623a055c03b22d64d6d5da81835d0
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Mon Jul 6 15:50:47 2009 +0530
+
+ arm: Kirkwood: bugfix: UART1 bar correction
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+commit 50243e3e7a96a96c5418ce6c90b7252d26fdd5b0
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Jul 7 15:48:58 2009 -0500
+
+ usb: Fix compiler warning with gcc4.4
+
+ ehci-hcd.c: In function 'ehci_submit_root':
+ ehci-hcd.c:719: warning: value computed is not used
+ ehci-hcd.c:748: warning: value computed is not used
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 04366d070a1a3f7affddf15aaaea87bcf44cdbb0
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Wed Jul 8 11:42:19 2009 +0900
+
+ sh: Update pci config for Renesas r7780mp board
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 74d9c16a681aa24bb4125191fe39dc7c75cde56a
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Jun 25 16:31:26 2009 +0900
+
+ sh: Add support ESPT-GIGA borad
+
+ ESPT-Giga is SH7763-based reference board.
+ Board support is relatively sparse, presently supporting serial,
+ gigabit ethernet, USB host, and MTD.
+
+ More information (in Japanese) available at:
+ http://www.cente.jp/product/cente_hard/ESPT-Giga.html
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit dae4e0148a1146a5610025ae4b445e841410b659
+Author: Matthias Fuchs <matthias.fuchs@esd.eu>
+Date: Fri Jul 3 16:06:37 2009 +0200
+
+ Add ESD PCI vendor ID
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+
+commit 876b3cef537aab2cba8c19505db2876f6057f818
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Jun 22 18:01:41 2009 -0500
+
+ api_examples/Makefile: General cleanup
+
+ * Remove symlinking of files located outside api_examples/
+
+ * Auto generate dependencies for files located outside api_examples/
+
+ * Update names of variables to be similar to those in tools/Makefile
+
+ * Fix out of tree build error
+ Dependencies are calculated for all files in the SRCS variable.
+ Previously, the SRCS variable contained files which were symlinked
+ into the api_examples/ directory. These symlinked files did not exist
+ when dependencies were calculated when building out of tree. This
+ resulted in errors such as:
+ make[1]: *** No rule to make target `/work/wd/tmp-ppc/api_examples/.depend', needed by `_depend'. Stop.
+ make[1]: Leaving directory `/home/wd/git/u-boot/work/api_examples'
+ make: *** [depend] Error 2
+
+ Since symlinked source files are no longer used, this bug no longer
+ exists.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Acked-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 522f6f02adb93194e337016fe2e4e53c58d5d5ea
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Jun 22 18:01:40 2009 -0500
+
+ api_examples/Makefile: Get rid of unnecessary intermediate LIB target
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Acked-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 117d0ab5e6f3b3dd48fc346df4919555a78afd39
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Jun 22 18:01:39 2009 -0500
+
+ api_examples/Makefile: Combine ELF and BIN targets
+
+ Combining the two rules cleans up the Makefile a bit
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Acked-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 644cb38108b8dc22e0ef3cf5f404fe310d1995f8
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Jun 22 18:01:38 2009 -0500
+
+ api_examples/Makefile: Split up variable declarations
+
+ This cleans up the Makefile a bit and simplifies future changes
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Acked-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 890d242facc4079ed21e979ced2e8c6d6974f6d3
+Author: Timur Tabi <timur@freescale.com>
+Date: Fri Jun 19 14:10:52 2009 -0500
+
+ remove _IO_BASE and KSEG1ADDR from board configuration files
+
+ The KSEG1ADDR macro used to be necessary for the RTL8139 Ethernet
+ driver, but the code that used that macro was removed over a year
+ ago, so board configuration files no longer need to define it.
+
+ The _IO_BASE macro is also automatically defined to 0 if it isn't
+ already set, so there's no need to define that macro either in the
+ board configuration files.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+ Acked-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit c9969947a4687de90e2bb58e76842b491aa0e0b9
+Author: Jon Smirl <jonsmirl@gmail.com>
+Date: Sun Jun 14 18:21:28 2009 -0400
+
+ board support patch for phyCORE-MPC5200B-tiny
+
+ Add support for the Phytec phyCORE-MPC5200B-tiny.
+ Code originally from Pengutronix.de.
+ Created CONFIG_SYS_ATA_CS_ON_TIMER01 define for when IDE CS is on
+ Timer 0/1
+
+ Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 7bd49ad12cc36a4de6995ddabbc65ffa1aa1933d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Jun 15 13:37:20 2009 -0400
+
+ kallsyms: fix escaping of NUL char in strings
+
+ The current kallsyms code is using \\0 to escape the backslash in the awk
+ code, but the shell too needs escaping. This way we make sure gcc is
+ passed the \0. Then gcc itself will consume this as an octal, so we have
+ to use 000 so gcc will create the final NUL.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit ed540f07b8ad86909704e9806c1762462cb4995a
+Author: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
+Date: Fri Jun 26 10:18:49 2009 -0400
+
+ Blackfin: cm-bf561: add example settings for EXT-BF5xx-USB-ETH2 add-on
+
+ The cm-bf561 module can easily hook up to the EXT-BF5xx-USB-ETH2 extender
+ board, so add a simple example of how to do that in the board config.
+
+ Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit f8bf54b4081c3c3d518830df0017a23ec672a841
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Jun 25 19:40:28 2009 -0400
+
+ Blackfin: blackstamp: update spi flash settings
+
+ The latest blackstamp boards can only run the SPI flash at 15MHz before
+ they start to crap out, so lower the max speeds accordingly. The new SPI
+ flash also has different sector requirements, so update the environment
+ sizes as well.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 286070ddc8339666c09bd7912e960b850a8a0318
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 03:31:52 2008 -0400
+
+ Blackfin: add cache_dump commands
+
+ A few debug-type commands used to dump the raw icache/dcache data. Useful
+ when trying to track down cache-related bugs.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 632e9b671efb0a6c900499f7a49fe5b63292b5fc
+Author: Matthias Fuchs <matthias.fuchs@esd.eu>
+Date: Wed Jul 8 15:31:57 2009 +0200
+
+ ppc4xx: Set default PCI device ID for 405EP boards
+
+ Current code only sets the PCI vendor id to 0x1014 and
+ leaved device id to 0x0000.
+
+ Ths patch ....
+ a) uses the correct PCI_VENDOR_ID_IBM macro for this
+ b) sets the default device ID as stated in the UM to 0x0156
+ by using PCI_DEVICE_ID_IBM_405GP for this.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 123f102ec093fba6967066acdf9beb637df2e2d1
+Author: Matthias Fuchs <matthias.fuchs@esd.eu>
+Date: Wed Jul 8 13:43:55 2009 +0200
+
+ ppc4xx: Move 405EP pci code from cpu_init_f() to __pci_pre_init()
+
+ This patch moves some basic PCI initialisation from the 4xx cpu_init_f()
+ to cpu/ppc4xx/4xx_pci.c.
+
+ The original cpu_init_f() function enabled the 405EP's internal arbiter
+ in all situations. Also the HCE bit in cpc0_pci is always set.
+ The first is not really wanted for PCI adapter designs and the latter
+ is a general bug for PCI adapter U-Boots. Because it enables
+ PCI configuration by the system CPU even when the PCI configuration has
+ not been setup by the 405EP. The one and only correct place is
+ in pci_405gp_init() (see "Set HCE bit" comment).
+
+ So for compatibility reasons the arbiter is still enabled in any case,
+ but from weak pci_pre_init() so that it can be replaced by board specific
+ code.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c71103f9dc66dfcce8ad6df942364043bf27ade8
+Author: Matthias Fuchs <matthias.fuchs@esd.eu>
+Date: Wed Jul 8 13:43:23 2009 +0200
+
+ ppc4xx: Make is_pci_host() available for all 440 and 405 CPUs
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1d8937a469bfeb55ca1f6d89a4e7cd2dfee3cf17
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Mon Jun 29 20:56:43 2009 +0530
+
+ usb: add Marvell Kirkwood ehci host controller driver
+
+ This driver is tested on Sheevaplug platform
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit db7b43e4681f6f93c336132708157a8a0cca1f8b
+Author: Vivek Mahajan <vivek.mahajan@freescale.com>
+Date: Wed Jun 24 10:08:40 2009 +0530
+
+ mpc83xx: USB: fix: access of ehci struct elements
+
+ It fixes the access to the 'ehci' struct elements for mpc83xx which
+ should have been taken care of in 4ef01010aa4799c759d75e67007fdd3a38c88c8a
+ Sorry about that.
+
+ Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 08066152735417fc55a5c9de2cec0714c529e4f3
+Author: Vivek Mahajan <vivek.mahajan@freescale.com>
+Date: Fri Jun 19 17:56:00 2009 +0530
+
+ mpc8xxx: USB: fix: access of ehci struct elements
+
+ This patch fixes the access to the 'ehci' struct elements which should
+ have been taken care off in 4ef01010aa4799c759d75e67007fdd3a38c88c8a
+ Sorry about that.
+
+ Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit c3a012ce65818beb274195cd47f31ed80d0fbaa5
+Author: Bryan Wu <bryan.wu@analog.com>
+Date: Tue Jun 16 05:26:27 2009 -0400
+
+ usb: musb: add timeout via CONFIG_MUSB_TIMEOUT
+
+ Signed-off-by: Bryan Wu <bryan.wu@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 7984967a9405672db1581402d2c2cfae268d1a67
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Jun 16 05:26:25 2009 -0400
+
+ usb: musb: drop old musb read/write prototypes
+
+ These functions are no longer defined, so remove their prototypes.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 4e04f16020115ab5ccf53158e100de58bcaf29bd
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Mon Jun 15 11:50:07 2009 -0500
+
+ usb: fix CONFIG_SYS_MPC83xx_USB_ADDR not defined error
+
+ fix a stray CONFIG_MPC83XX that escaped commit
+ 0f898604945af4543c1525fc33b6bae621a3b805.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit bc0d3296f1780b50e6b9630aee5eb368f2afb6cb
+Author: Michal Simek <monstr@monstr.eu>
+Date: Tue Jun 30 23:47:30 2009 +1000
+
+ asm-generic: Consolidate errno.h to asm-generic/errno.h
+
+ This patch use blackfin errno.h implementation which
+ correspond Linux kernel one.
+
+ MIPS implemetation is different that's why I keep it.
+
+ I removed ppc_error_no.h from Marvell boards which
+ was the same too.
+
+ I have got ack from ppc40x, blackfin, arm, coldfire and avr custodians.
+
+ Acked-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 2896b5851f0430bf16529376a4193630e966c788
+Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
+Date: Tue Jul 7 16:01:02 2009 +0200
+
+ Command improvements for ubifs
+
+ Check that an argument is passed to ubifsmount and that addresses and
+ sizes are actually numbers for ubifsload. Also improve the instructions
+ a bit.
+
+ Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 25c8f4005979ab2d190713ba341d96a5fa905cdb
+Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
+Date: Tue Jul 7 16:59:46 2009 +0200
+
+ Handle VID header offset in ubi part command
+
+ The VID header offset is sometimes needed to initialize the UBI
+ partition. This patch adds it (optionally) to the command line
+ for the ubi part command.
+
+ (Lines have been properly wrapped since last version)
+
+ Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+ Acked-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3672cd5c3b53d219d33345eebad4e25ad5bf6d52
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 9 09:56:16 2009 +0200
+
+ MAINTAINERS: fix sorting, remove duplicates.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit efbf14e9a2394a154b12643d4a011994b5096b5a
+Author: Heiko Schocher <heiko.schocher@invitel.hu>
+Date: Wed Dec 10 08:27:01 2008 +0100
+
+ all platforms: make show_boot_progress() work again
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 205a0988d8fd778c60746c34c2f17dbd2b7cd0d2
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Mon Jun 29 15:25:18 2009 +0530
+
+ nand: Add Marvell Kirkwood NAND driver
+
+ This patch adds a NAND driver for the Marvell Kirkwood SoC's
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Acked-by: Scott Wood <scottwood@freescale.com>
+
+commit 0580e48f53f972783e56fcedadb9ce6e5b0b6f32
+Author: Matthias Fuchs <matthias.fuchs@esd.eu>
+Date: Mon Jul 6 16:27:33 2009 +0200
+
+ ppc4xx: Make pll_write global
+
+ This patch makes pll_write on PPC405EP boards
+ global and callable from C code.
+
+ pll_write can be used to dynamically modify the PLB:PCI divider
+ as it is required for 33/66 MHz pci adapters based on the 405EP.
+
+ board_early_init_f() is a good place to do that (check M66EN signal
+ and call pll_write() when it is required).
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 20b3c4b528606d51799aed5e4c71783720cd2b72
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jul 6 11:44:33 2009 +0200
+
+ ppc4xx: Remove compilation warning "pci_async_enabled defined but not used"
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d0a1364f91c80d29daff6b27a7904a50cdc00b35
+Author: Matthias Fuchs <matthias.fuchs@esd.eu>
+Date: Fri Jul 3 16:06:06 2009 +0200
+
+ ppc4xx: Implement is_pci_host() for 405 CPUs
+
+ This patch implements the is_pci_host() function in a similiar way
+ as it is used on 440 targets.
+
+ The former path with CONFIG_PCI_HOST == PCI_HOST_AUTO does not
+ build on 405EP targets because checking the PCI arbiter is different.
+ So putting the fixed code into a separate function makes the code
+ more readable.
+
+ Also using is_pci_host() on 405 brings 405 and 440 PCI code
+ a little bit closer.
+
+ In preparation for an upcoming 405EP based PMC module I made this
+ function weak so that it can be overwritten from board specific code.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 04ddae915f295dee301f15c32100533a48e3b433
+Author: Alessio Centazzo <centazzo@gmail.com>
+Date: Wed Jul 1 22:20:51 2009 -0700
+
+ ppc4xx: Fixed PPC4xx debug compilation error in uic.c
+
+ This patch fixes a debug compilation error for PPC4xx platforms, all
+ other architectures are not affected by this change. The 'handler'
+ pointer was undefined. The fix is exercised and has effect only if
+ DEBUG is defined.
+
+ Signed-off-by: Alessio Centazzo acpatin@yahoo.com
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 48e2b535a0dd3a7b77b674130934a24f9de6f48d
+Author: Felix Radensky <felix@embedded-sol.com>
+Date: Wed Jul 1 11:37:46 2009 +0300
+
+ 4xx: Fix compilation warnings and MQ registers dump in SPD DDR2 code
+
+ This patch fixes printf format string compilation warnings in several
+ debug statements. It also fixes the dump of DDR controller MQ registers
+ found on some 44x and 46x platforms. The current register dump code
+ uses incorrect DCRs to access these registers.
+
+ Signed-off-by: Felix Radensky <felix@embedded-sol.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 26d37f0061ad05e5c383c910f00e6006f3c89a3a
+Author: Felix Radensky <felix@embedded-sol.com>
+Date: Mon Jun 22 15:30:42 2009 +0300
+
+ ppc4xx: Fix FDT EBC mappings on Canyonlands
+
+ This patch fixes 2 problems with FDT EBC mappings on Canyonlands.
+ First, NAND EBC mapping was missing, making Linux NAND driver
+ unusable on this board. Second, NOR remapping code assumed that
+ NOR is always on CS0, however when booting from NAND NOR is on CS3.
+
+ Signed-off-by: Felix Radensky <felix@embedded-sol.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit baa9f9ba4345ed6dc5c403871c32e6295316ea52
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Tue Jun 16 22:29:15 2009 +0900
+
+ sh: Revised the build with newest compiler
+
+ The check of data became severe from newest gcc.
+ This patch checked in gcc-4.2 and 4.3 .
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit be45c632568ba76343c1453b3951ad793f482fd5
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Jun 4 12:06:48 2009 +0200
+
+ sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 8dd29c87ba370072a8464b8cc19e0a1e6e0497b4
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Jun 4 12:06:47 2009 +0200
+
+ sh3/sh4: fix CONFIG_SYS_HZ to 1000
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit add380f51f34ed1e2678c2abac8d53c91d652f26
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Jun 4 12:06:46 2009 +0200
+
+ sh: introduce clock framework
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 3931a375de2c381d9ff5ec2767b2da9f62a41aef
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Jun 4 12:06:45 2009 +0200
+
+ sh: unify linker script
+
+ all sh boards use the same cpu linker script so move it to cpu/$(CPU)
+
+ that could be overwrite in following order
+ SOC
+ BOARD
+ via the corresponding config.mk
+
+ tested on r2dplus
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 236aad875817771eb1f25ed32784b3cd7760b2e6
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Jun 4 12:06:44 2009 +0200
+
+ sh: make the linker scripts more generic
+
+ currently we need to sync the linker script enty and TEXT_BASE manualy
+ and the reloc_dst is based on it
+
+ instead provide it now from the ldflags
+
+ tested on r2dplus
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit ce29817212792113cd2d67a9767049a2e262c406
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Jun 4 12:06:43 2009 +0200
+
+ sh7785lcr: fix out of tree build
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 2e8a6f551cba550e9220dca4d8504066203b1f74
+Author: HeungJun Kim <riverful.kim@gmail.com>
+Date: Tue Jun 30 14:42:22 2009 +0900
+
+ env_onenand: change env_address type from unsigned long to loff_t
+
+ If use the onenand boot, the env_relocate_spec() calls mtd->read(),
+ and the type of the argument #2 of mtd->read() was changed to loff_t.
+ But, the "env_addr" type is still unsigned long, thus this patch change
+ the type from unsigned long to loff_t.
+
+ Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 66372fe2ab11cdeb0e841ad9eb6ba79769db4909
+Author: Mingkai Hu <Mingkai.hu@freescale.com>
+Date: Thu Jun 18 18:23:27 2009 +0800
+
+ fsl_elbc_nand: redirect the pointer of bbt pattern to RAM
+
+ The bbt descriptors contains the pointer to the bbt pattern which
+ are statically initialized memory struct. When relocated to RAM,
+ these pointers will continue point to NOR flash(or L2 SRAM, or
+ other boot device). If the contents of NOR flash changed or L2
+ SRAM disabled, it'll hang the system.
+
+ Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 1dac3a51875967f32641bbc0d26dc382ef02330a
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Jun 24 17:23:49 2009 -0500
+
+ nand_spl: Fix cmd_ctrl usage in nand_boot.c.
+
+ When adding large page NAND support to this file, I had a misunderstanding
+ about the exact semantics of NAND_CTRL_CHANGE (which isn't documented
+ anywhere I can find) -- it is apparently just a hint to drivers,
+ which aren't required to preserve the old value for subsequent
+ non-"change" invocations.
+
+ This change makes nand_boot.c no longer assume this. Note that this
+ happened to work by chance with some NAND drivers, which don't preserve
+ the value, but treat 0 equivalently to NAND_CTRL_ALE.
+
+ I don't have hardware to test this, so any testing is appreciated.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 98713d2663d5d30dde74f48f547114a2bfd9d463
+Author: kevin.morfitt@fearnside-systems.co.uk <kevin.morfitt@fearnside-systems.co.uk>
+Date: Thu Jun 18 18:41:03 2009 +0100
+
+ Bug-fix in drivers mtd nand Makefile
+
+ The S3C2410 NAND driver source file is included in the makefile instead of
+ the object file.
+
+ Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit b74ab737369bbbe66c15cbe6c0d0b6a351b00c96
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Mon May 18 16:07:22 2009 +0200
+
+ nand_spl: read environment early, when booting from NAND using nand_spl
+
+ Currently, when booting from NAND using nand_spl, in the beginning the default
+ environment is used until later in boot process the dynamic environment is read
+ out. This way environment variables that must be interpreted early, like the
+ baudrate or "silent", cannot be modified dynamically and remain at their
+ default values. Fix this problem by reading out main and redundand (if used)
+ copies of the environment in the nand_spl code.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 378adfcdf4bbd77ee4cbc3276d4733e218308a21
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat May 16 14:27:40 2009 +0200
+
+ mtd: nand: use loff_t for offset
+
+ nand_util currently uses size_t which is arch dependent and not always a
+ unsigned long. Now use loff_t, as does the linux mtd layer.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 8360b66bac9567701027a0087274d0c9b2fe8d6b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun May 24 17:34:33 2009 +0200
+
+ nand/onenand: Fix missing argument checking for "markbad" command
+
+ The "nand markbad" and "onenand markbad" commands did not check if an
+ argument was passed; if this was forgotten, no error was raised but
+ block 0 was marked as bad.
+
+ While fixing this bug, clean up the code a bit and allow to pass more
+ than one block address, thus allowing to mark several blocks as bad
+ in a single command invocation.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit cd84423a09f3a08029fe41c1db96168debd0b51f
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon May 25 22:42:28 2009 -0400
+
+ mtd: nand: new base driver for memory mapped nand devices
+
+ The BF537-STAMP Blackfin board had a driver for working with NAND devices
+ that are simply memory mapped. Since there is nothing Blackfin specific
+ about this, generalize the driver a bit so that everyone can leverage it.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit d27bc728cf35e7d7996fbd77154335e66615b213
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Mon May 18 16:06:45 2009 +0200
+
+ env_nand: remove unused variable.
+
+ Remove an unused "total" variable in multiple functions.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 154b5484ac7dcbcd0fb5ba388d930b02f87fa302
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Sun May 10 15:43:01 2009 -0700
+
+ davinci_nand chipselect/init cleanup
+
+ Update chipselect handling in davinci_nand.c so that it can
+ handle 2 GByte chips the same way Linux does: as one device,
+ even though it has two halves with independent chip selects.
+ For such chips the "nand info" command reports:
+
+ Device 0: 2x nand0, sector size 128 KiB
+
+ Switch to use the default chipselect function unless the board
+ really needs its own. The logic for the Sonata board moves out
+ of the driver into board-specific code. (Which doesn't affect
+ current build breakage if its NAND support is enabled...)
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 496863b2440dd7cd69a1ad2443a9badd5f8968d1
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Sat May 9 12:35:20 2009 -0400
+
+ NAND DaVinci: Update to ALE/CLE Mask values
+
+ All DaVinci SOC's use a CLE mask of 0x10 and an ALE mask of 0x8
+ except the DM646x. This was decided by the design team driving the design.
+ This patch updates the CLE and ALE values for DM646x.
+ Updated patches for DM646x will be sent shortly.
+ This applies to u-boot-nand-flash git
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 0c1684437ef810c503df29e8d73f63191aa63862
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Wed Apr 29 09:47:09 2009 -0400
+
+ ARM DaVinci: Changing ALE Mask Value
+
+ The ALE mask used by DaVinci SOCs is wrong. The patch changes the mask value
+ from '0xa' to '0x8'. This is the mask we use for all TI releases.
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 6e29ed8e576a6900c5d8dcde36b423ac576894dc
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Tue Apr 28 13:19:53 2009 -0700
+
+ davinci_nand: cleanup II (CONFIG_SYS_DAVINCI_BROKEN_ECC)
+
+ Remove CONFIG_SYS_DAVINCI_BROKEN_ECC option. It's not just nasty;
+ it's also unused by any current boards, and doesn't even match the
+ main U-Boot distributions from TI (which use soft ECC, or 4-bit ECC
+ on newer chips that support it).
+
+ DaVinci GIT kernels since 2.6.24, and mainline Linux since 2.6.30,
+ match non-BROKEN code paths for 1-bit HW ECC. The BROKEN code paths
+ do seem to partially match what MontaVista/TI kernels (4.0/2.6.10,
+ and 5.0/2.6.18) do ... but only for small pages. Large page support
+ is really broken (and it's unclear just what software it was trying
+ to match!), and the ECC layout was making three more bytes available
+ for use by filesystem (or whatever) code.
+
+ Since this option itself seems broken, remove it. Add a comment
+ about the MV/TI compat issue, and the most straightforward way to
+ address it (should someone really need to solve it).
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit fcb774777562bb7bcdc53c608d0e6bae906ce0f6
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Tue Apr 28 13:19:50 2009 -0700
+
+ davinci_nand: cleanup I (minor)
+
+ Minor cleanup for DaVinci NAND code:
+
+ - Use I/O addresses from nand_chip; CONFIG_SYS_NAND_BASE won't
+ be defined when there are multiple chipselect lines in use
+ (as with common 2 GByte chips).
+
+ - Cleanup handling of EMIF control registers
+ * Only need one pointer pointing to them
+ * Remove incorrect and unused struct supersetting them
+
+ - Use the standard waitfunc; we don't need a custom version
+
+ - Partial legacy cleanup:
+ * Don't initialize every board like it's a DM6446 EVM
+ * #ifdef a bit more code for BROKEN_ECC
+
+ Sanity checked with small page NAND on dm355 and dm6446 EVMs;
+ and large page on dm355 EVM (packaged as two devices, not one).
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 8e5e9b940cdede0debe528cdd7edccccbb3ebf2a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Jul 7 22:35:02 2009 +0200
+
+ Coding style cleanup; update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d318d0c44d8e91e937c4dad0c5b1d2f6bb9d9fd8
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jun 29 13:30:50 2009 +0200
+
+ UBI: Fix build problem noticed on Apollon (arm/testing repo)
+
+ This patch fixes a build problem noticed on Apollon by using
+ mtd_dev_by_eb() instead of "/" as done in the Linux UBI version.
+ So this brings the U-Boot UBI version more in sync with the Linux
+ version again.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2efee52b09657e9353655b9dae9e1d1a67a2abe4
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Mon Jul 6 20:29:15 2009 +0530
+
+ sf: Macronix additional chips supported
+
+ new chips supported:-
+ MX25L1605D, MX25L3205D, MX25L6405D, MX25L12855E
+ out of which MX25L6405D and MX25L12855E tested on Kirkwood platforms
+
+ Modified the Macronix flash support to use 2 bytes of device id instead of 1
+ This was required to support MX25L12855E
+
+ Signed-off-by: Piyush Shah <spiyush@marvell.com>
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit dd54126715b89ed0c43322aa78b0dad306f043b6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Jun 19 03:27:28 2009 -0400
+
+ sf: sst: add sst25vf###b ids
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 7d907f0ea993b179a197d8db2a36f122bc673c2d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Jun 19 03:20:06 2009 -0400
+
+ sf: sst: fix sector size
+
+ Looks like when I was encoding the sector sizes, I forgot to divide by 8
+ (due to the stupid marketing driven process that declares all sizes in
+ useless megabits and not megabytes).
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit ceb70b466e75ceb1a621b6163f7e31116bfc8094
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Jul 5 01:06:06 2009 +0200
+
+ nhk8815: fix MAKEALL
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d08e5ca301b69ab77ecdd34e2b06aee30d6057d1
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Sat Jul 4 10:31:24 2009 +0200
+
+ MX31: Add NAND SPL boot support to i.MX31 PDK board.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit 78eabb90b793fafe875a7469526d1715fa56cbb4
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Mon Jun 29 20:55:54 2009 +0530
+
+ arm: Kirkwood: arch specific updated for ehci-Kirkwood driver support
+
+ This patch abstracts Kirkwood arch specific changes to support ehci-kirkwood driver
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+commit 095a460b49022e64df76134300643606e3acb4e9
+Author: Alessandro Rubini <rubini@unipv.it>
+Date: Mon Jun 29 10:52:37 2009 +0200
+
+ arm nomadik: use 1000 as HZ value and rewrite timer code
+
+ This sets CONFIG_SYS_HZ to 1000 as required, and completely rewrites
+ timer code, which is now both correct and much smaller. Unused
+ functions like udelay_masked() have been removed as no driver uses
+ them, even the ones that are not currently active for this board.
+ mtu.h is copied literally from the kernel sources.
+
+ Signed-off-by: Alessandro Rubini <rubini@unipv.it>
+ Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f7aa59b29a451cc502078a9e4ba32345a4250c05
+Author: Alessandro Rubini <rubini@unipv.it>
+Date: Mon Jun 22 09:18:57 2009 +0200
+
+ arm nomadik: allow Nand and OneNand to coexists
+
+ The evaluation kit has both Nand and OneNand, both drivers are there
+ and the two configurations only select a different default for the
+ jffs partition. This adds the OneNand driver and cleans up storage.
+
+ Signed-off-by: Alessandro Rubini <rubini@unipv.it>
+ Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
+
+commit fd14c41a861cd38ee2fe3abd61d59b57b4eb23c9
+Author: Alessandro Rubini <rubini@unipv.it>
+Date: Mon Jun 22 09:18:47 2009 +0200
+
+ arm nomadik: cleanup reset
+
+ There is only one public release of the Nomadik chip, so the ifdef
+ in reset code as well as a define in the config file are not needed
+
+ Signed-off-by: Alessandro Rubini <rubini@unipv.it>
+ Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
+
+commit ee1363f2da3996bafdecdd8f4e48862ebff3f271
+Author: Alessandro Rubini <rubini@unipv.it>
+Date: Mon Jun 22 09:18:37 2009 +0200
+
+ arm nomadik: rename board to nhk8815
+
+ This is an error in my side in the initial submission: nobody
+ calls it ""nmdk8815", it's "nomadik hardware kit", nhk8815, instead.
+
+ Signed-off-by: Alessandro Rubini <rubini@unipv.it>
+ Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
+
+commit 040f8f63e922bbfb8ba0958bf637f11a917f5c38
+Author: Stefano Babic <sbabic@denx.de>
+Date: Wed Jul 1 20:40:41 2009 +0200
+
+ xscale: add support for the polaris board
+
+ The Polaris board is based on the TrizepsIV module of
+ Keith & Koep (http://www.keith-koep.com).
+
+ Signed-off-by: Stefano Babic <sbabic@denx.de>
+
+commit 88bd97501314683b87f3f1edcf55b347c041b722
+Author: Stefano Babic <sbabic@denx.de>
+Date: Wed Jul 1 04:33:56 2009 +0200
+
+ xscale: fix USB initialization for Trizepsiv module
+
+ Due to change in the usb_board_init() prototype, the USB for
+ the TrizepsIV was not correctly initialized.
+ Removed dummy print from usb_board_stop().
+
+ Signed-off-by: Stefano Babic <sbabic@denx.de>
+
+commit 0b785ddd60120cfb74d18e58c56054238219f6db
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Wed Jul 1 20:34:51 2009 +0200
+
+ net: merge bugfix: Marvell Kirkwood gigabit ethernet driver
+
+ This patch looks okay on u-boot-net.git/next branch
+ but when it was merged to u-boot.git/master the last line is missing
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 33b1d3f43a16fbb79004075ce89ae4e618b288a2
+Author: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
+Date: Tue Jun 30 21:03:37 2009 +0200
+
+ at91: Add esd gmbh MEESC board support
+
+ This patch adds support for esd gmbh MEESC board.
+ The MEESC is based on an Atmel AT91SAM9263 SoC.
+
+ Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
+
+commit 21761540b43c7086c75ee9afb412da1e5ddde2e9
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Jun 30 21:03:35 2009 +0200
+
+ ARM: Update mach-types
+
+ update against linux v2.6.30
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 45627fce18139a74e0755124d27376b520db156c
+Author: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
+Date: Tue Jun 30 23:03:33 2009 +0200
+
+ at91: Add CAN init function
+
+ To enable CAN init, CONFIG_CAN has to be defined in the board config file
+ and at91_can_hw_init() has to be called in the board specific code.
+
+ CAN is available on AT91SAM9263 and AT91CAP9 SoC.
+
+ Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
+
+commit 2e23008e5dbde7fe4c4758bee5a393e1db796cdf
+Author: Simon Kagstrom <simon.kagstrom@netinsight.net>
+Date: Tue Jun 30 23:03:31 2009 +0200
+
+ arm: Kirkwood: Correct header define
+
+ Correct define typo (. -> ,)
+
+ Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
+
+commit 8449f287f5c53d59db13c3c512e6bd1750b692d1
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Wed Jul 1 01:07:55 2009 +0200
+
+ MX31: Add basic support for Freescale i.MX31 PDK board.
+
+ Add support for Freescale's i.MX31 PDK board (a.k.a. 3 stack board).
+
+ This patch assumes that some other program performs the actual
+ NAND boot.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+ Acked-by: Fabio Estevam <fabioestevam@yahoo.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 8d460a573e2a2ac4834636903865a0428ad0e629
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Jun 23 00:12:01 2009 +0200
+
+ S3C24x0: extract interrupts from timer
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c8badbe500a752f42049e51042767ee62ea714e0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Jun 28 14:14:21 2009 +0200
+
+ dm355/pm9261: add missing CONFIG_NET_MULTI
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 798bf9a9ade1cfbe85a16d180cad720927d8e10a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Jun 23 00:12:01 2009 +0200
+
+ arm920t/interrupts: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 06e758e75c79ce8761866bf8165c443584a20893
+Author: Kim, Heung Jun <riverful@gmail.com>
+Date: Sat Jun 20 11:02:17 2009 +0200
+
+ move L2 cache enable/disable function to cache.c in the omap3 SoC directory
+
+ Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com>
+ CC: Dirk Behme <dirk.behme@googlemail.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d583ef5147066d3609de21f3beebbab99a19bad4
+Author: Thomas Lange <thomas@corelatus.se>
+Date: Sat Jun 20 11:02:17 2009 +0200
+
+ ARM DaVinci: EMIF settings
+
+ NAND module should not modify EMIF registers unrelated to CS2
+ that is used for NAND, i.e. do not modify EWAIT config register
+ or registers for other Chip Selects.
+
+ Without this patch, EMIF configurations made in board_init()
+ will be invalidated.
+
+ Signed-off-by: Thomas Lange <thomas@corelatus.se>
+
+commit 2600b8571a26c10c1c43401d7af38e2333cc5381
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jun 20 11:02:17 2009 +0200
+
+ versatile: config coding style cleanup
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Cc: Peter Pearse <peter.pearse@arm.com>
+
+commit 4efb77d41f9c5d93f0f92dda60e742023fa03c72
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Sat Jun 20 11:01:53 2009 +0200
+
+ arm: Kirkwood: Basic SOCs support
+
+ Kirkwood family controllers are highly integrated SOCs
+ based on Feroceon-88FR131/Sheeva-88SV131/arm926ejs cpu core.
+
+ SOC versions supported:-
+ 1) 88F6281-A0 define CONFIG_KW88F6281_A0
+ 2) 88F6192-A0 define CONFIG_KW88F6192_A0
+
+ Other supported features:-
+ 1) get_random_hex() fucntion
+ 2) PCI Express port initialization
+ 3) NS16550 driver support
+
+ Contributors:
+ Yotam Admon <yotam@marvell.com>
+ Michael Blostein <michaelbl@marvell.com
+
+ Reviewed-by: Ronen Shitrit <rshitrit@marvell.com>
+ Acked-by: Stefan Rose <sr@denx.de>
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+commit 5c3d5817e5e68b828c165c501c215e793dc63aac
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Sat Jun 20 11:01:52 2009 +0200
+
+ arm: generic cache.h for ARM architectures
+
+ This patch is required for Kirkwood SoC support
+ may be used by other ARM architectures
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+commit 9c8c706c92e53433a871a563946c38075d76504d
+Author: Matthias Ludwig <mludwig@ultratronik.de>
+Date: Sat Jun 20 11:01:50 2009 +0200
+
+ OMAP3EVM: fix typo. replace CS6 by CS5, no functionality change
+
+ Signed-off-by: Matthias Ludwig <mludwig@ultratronik.de>
+
+commit 0aafde1dc76d6d65d6be10bf499ec86d9ffee8b9
+Author: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+Date: Wed Jun 24 08:32:09 2009 +0200
+
+ at91sam9260/9263: add back up for the rst(reset controller).
+
+ On the boards at91sam9260ek, at91sam9263ek and afed9260, the rstc register was
+ set to 0 after being set to 500 ms for the PHY reset.
+ Do backup the old reset length and restore it after the MACB initialisation.
+
+ Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit afb0b1315c048ce2b1f35f0183b8b118ad0c14e1
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Jul 3 12:45:44 2009 -0500
+
+ fsl: Fix compiler warnings from gcc-4.4 in sys_eeprom code
+
+ sys_eeprom.c: In function 'do_mac':
+ sys_eeprom.c:323: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ sys_eeprom.c: In function 'mac_read_from_eeprom':
+ sys_eeprom.c:395: warning: dereferencing type-punned pointer will break strict-aliasing rules
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e94e460c6e8741f42dab6d8dd4b596ba5d9d79ae
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jun 30 17:15:51 2009 -0500
+
+ 83xx: Add support for fsl_dma driver
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Reviewed-by: Ira W. Snyder <iws@ovro.caltech.edu>
+ Tested-by: Ira W. Snyder <iws@ovro.caltech.edu>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9adda5459ca62120c0c50b82b766fe1cf6925bbf
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jun 30 17:15:50 2009 -0500
+
+ 83xx: Replace CONFIG_ECC_INIT_VIA_DDRC references
+
+ Update 83xx architecture's CONFIG_ECC_INIT_VIA_DDRC references to
+ CONFIG_ECC_INIT_VIA_DDRCONTROLLER, which other Freescale architectures
+ use
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 039594a4301dadceb267db5e8b9c8c78b1bb86b5
+Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+Date: Thu Jul 2 16:15:01 2009 +0530
+
+ 8xxx: Second UART port added for MPC85xx, MPC83xx, MPC86xx processors
+
+ Defining the next two configs allows to switch the serial port from the
+ console using the setenv stdin and stdout
+ 1. #define CONFIG_SERIAL_MULTI 1 /* Enable both serial ports */
+ 2. #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */
+
+ Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 546b1032907df70f2dd0f98f3ad09885a88411e5
+Author: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+Date: Thu Jul 2 16:14:40 2009 +0530
+
+ 85xx: Adds GPIO registers to MPC85xx Memory Map.
+
+ Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 5da6f806b400372b8a0664f3282c9e83a402eb66
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jun 30 17:26:01 2009 -0500
+
+ 86xx: XPedite5170 board support
+
+ Initial support for Extreme Engineering Solutions XPedite5170 -
+ a MPC8640-based 3U VPX single board computer with a PMC/XMC
+ site.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e66f38da8434425aca8df08d06d9ef41b3478d3b
+Author: Timur Tabi <timur@freescale.com>
+Date: Wed Jul 1 16:51:59 2009 -0500
+
+ fsl_ddr: Fix DDR3 calculation of rank density with 8GB or more
+
+ The calculate for rank density in compute_ranksize() for DDR3 used all
+ integers for the expression, so the result was also a 32-bit integer, even
+ though the 'bsize' variable is a u64. Fix the expression to calculate a
+ true 64-bit value.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6af015b86b86d94de7ca1b23a3890bc93a50c2ab
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jun 30 17:15:49 2009 -0500
+
+ fsl_dma: Make DMA transactions snoopable
+
+ Make DMA transactions snoopable so that CPUs can keep caches up-to-date.
+ This allows dma transactions to be used for operations such as memory
+ copies without any additional cache control operations.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0d595f76bc9c7c8dff5bd31dffed87a840a03c56
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jun 30 17:15:48 2009 -0500
+
+ fsl_dma: Break out common memory initialization function
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 79f4333ceb059049b3ee560167d6cbaec493695f
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jun 30 17:15:47 2009 -0500
+
+ 8xxx: Move dma_init() call to common code
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 191c7118592cd182f2dc7f46b4f72d9bed0e2c76
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jun 30 17:15:46 2009 -0500
+
+ fsl_dma: Move dma function prototypes to common header file
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 7892f619d40f4196e41e7114c5dfee9fad0f572f
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jun 30 17:15:45 2009 -0500
+
+ 8xxx: Rename dma_xfer() to dmacpy()
+
+ Also update dmacpy()'s argument order to match memcpy's and use
+ phys_addr_t/phy_size_t for address/size arguments
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 484919cf3351212ebf748b9b13ece1ddaf7e7d1c
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jun 30 17:15:44 2009 -0500
+
+ fsl_dma: Fix Channel Start bug in dma_check()
+
+ The Channel Start (CS) bit in the Mode Register (MR) should actually be
+ cleared as the comment in the code suggests. Previously, CS was being
+ set, not cleared.
+
+ Assuming normal operation of the DMA engine, this change shouldn't have
+ any real affect.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 51402ac12be9a0025f16db51fbde7c050a54e5fe
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jun 30 17:15:43 2009 -0500
+
+ fsl_dma: Add support for arbitrarily large transfers
+
+ Support DMA transfers larger than the DMA controller's limit of
+ (2 ^ 26 - 1) bytes
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a730393a362741c318b21771b8d7b2647e546c3e
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jun 30 17:15:42 2009 -0500
+
+ fsl_dma: Use proper I/O access functions
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9c06071a6077ba95e9d43226156e39567d5d064a
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jun 30 17:15:41 2009 -0500
+
+ fsl_dma: Add bitfield definitions for common registers
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 017f11f68ef543e866be033bcb7b8058a8a380d8
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jun 30 17:15:40 2009 -0500
+
+ 8xxx: Break out DMA code to a common file
+
+ DMA support is now enabled via the CONFIG_FSL_DMA define instead of the
+ previous CONFIG_DDR_ECC
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6bbced671719518d0e28ff422623cd7ce396cbda
+Author: Mark Jackson <mpfj-list@mimc.co.uk>
+Date: Mon Jun 29 15:59:10 2009 +0100
+
+ Atmel LCD driver GUARDTIME fix
+
+ This patch allows the guard time parameter to be set in
+ the Atmel LCDC driver.
+
+ By default, the previous value of 1 is used, unless the
+ setting is defined elsewhere.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+
+commit 29c35182462feea09f322e51913759a53359a3e0
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date: Tue Jun 30 13:56:23 2009 +0800
+
+ 85xx: Add pci e1000 Ethernet support for P2020 board
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 156984a3611c28093919d3e3c042f722b5548253
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jun 18 08:39:42 2009 -0500
+
+ 8xxx: Fix PCI bus address setup for 36-bit configs
+
+ We want the outbound PCI memory map to end at the 4G boundary so we
+ can maximize the amount of space available for inbound mappings if
+ we have large amounts of memory.
+
+ This matches the device tree setup in the kernel for the 36-bit physical
+ configs for the platforms that have one (MPC8641 HPCN & MPC8572 DS).
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 480f61790565d77432b70b4016b73f2ae27d530f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jun 18 08:23:01 2009 -0500
+
+ 86xx: Add CPU_TYPE_ENTRY support
+
+ Unify with 83xx and 85xx and use CPU_TYPE_ENTRY. We are going to use
+ this to convey the # of cores and DDR width in the near future so its
+ good to keep in sync.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 98ab14e858bf60306d0aa3f0df5a7a5f88264aff
+Author: Peter Meerwald <pmeerw@pmeerw.net>
+Date: Mon Jun 29 15:48:33 2009 -0400
+
+ Blackfin: TWI/I2C: fix pure writes
+
+ If doing a pure write with register address and data (not a read/write
+ combo transfer), we don't set the initial transfer length properly which
+ ends up causing only the register address to be transferred.
+
+ While we're here, fix the i2c_write() parameter description of the buffer.
+
+ Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 5710de45808eb8f1cc34b51dc3e67e2422113249
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Sat May 30 01:13:33 2009 +0530
+
+ spi: Add Marvell Kirkwood SPI driver
+
+ This patch adds a SPI driver for the Marvell Kirkwood SoC's.
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+commit 6bde171a4c4116cee179167cb65335a28f99932d
+Author: Minkyu Kang <mk7.kang@samsung.com>
+Date: Thu Jun 25 19:21:33 2009 +0900
+
+ s3c64xx: move the reset_cpu function
+
+ Because of the reset_cpu is soc specific, should be move to soc
+ And read reset value from SYS_ID register instead of hard code
+ this patch also supports s3c6410
+
+ Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
+
+commit 576afd4faeba1519bcb8c0083c3e4d45e5643a48
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 17 00:58:37 2009 +0200
+
+ integrator: merge integratorap and integratorcp
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Peter Pearse <peter.pearse@arm.com>
+
+commit 46937b27427688a56bf7f5944a92d962dc43c3fa
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 17 00:58:36 2009 +0200
+
+ integratorap/cp: use cfi driver
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Peter Pearse <peter.pearse@arm.com>
+
+commit de7a01abd8aeb167946f391327e1e0d1e01f90c9
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 17 00:58:36 2009 +0200
+
+ integratorap/cp/versatile: remove non used functions
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Peter Pearse <peter.pearse@arm.com>
+
+commit f54851a6e3844b7e01581b5a9681f294118b7529
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 17 00:58:36 2009 +0200
+
+ integratorcp: split timer support
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Peter Pearse <peter.pearse@arm.com>
+
+commit 2bcef0723ea11c4e9bfbcfff2a93ec2da520b5f1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 17 00:58:36 2009 +0200
+
+ integratorap: split timer support
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Peter Pearse <peter.pearse@arm.com>
+
+commit 86baa085c52a7f3377a88074679c5aca9b9e4d38
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 17 00:58:36 2009 +0200
+
+ integratorap: split pci support
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Peter Pearse <peter.pearse@arm.com>
+
+commit 379e9fc0a319b8f6ae16d763590bf023f3afb87c
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Mon Jun 8 04:12:50 2009 +0400
+
+ arm: add support for CONFIG_GENERIC_MMC
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 47d19da4d3f9ac4787abe9dee32406478424be52
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Mon Jun 8 04:12:46 2009 +0400
+
+ serial_mx31: allow it to work with mx27 too and rename to serial_mxc
+
+ UART hardware on i.MX27 is the same as on the i.MX31 so we just
+ need to provide the driver with correct address of the registers.
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 1dc4da749dbde27ec862f5b65703e8e4541fbba3
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Mon Jun 8 04:12:45 2009 +0400
+
+ mx27: basic cpu support
+
+ This patch adds generic code to support Freescale's i.MX27 SoCs.
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit dd2f6965a6c71f6f711ec98827880152e022c236
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Sat Jun 13 20:50:03 2009 +0200
+
+ i.MX31: Create a common device file.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit 958f7da7887fea4a2091ae60944d62c1708c2c55
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jun 13 20:50:02 2009 +0200
+
+ ARM: Add macros.h to be used in assembler file.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 40c642bc19b9fa2906e3172487a522fee456340b
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Sat Jun 13 20:50:01 2009 +0200
+
+ MX31: Add NAND SPL for i.MX31.
+
+ This patch adds the NAND SPL framework needed to boot i.MX31 boards
+ from NAND.
+
+ It has been tested on a i.MX31 PDK board with large page NAND. Small
+ page NANDs should work as well, but this has not been tested.
+
+ Note: The i.MX31 NFC uses a non-standard layout for large page NANDs,
+ whether this is compatible with a particular setup depends on how
+ the NAND device is programmed by the flash programmer (e.g. JTAG
+ debugger).
+
+ The patch is based on the work by Maxim Artamonov.
+
+ Signed-off-by: Maxim Artamonov <scn1874@yandex.ru>
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit df81238b3e27a791da996a9208402ac8f40b9862
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Sat Jun 13 20:50:00 2009 +0200
+
+ ARM1136: Introduce CONFIG_PRELOADER macro.
+
+ Currently CONFIG_ONENAND_IPL is used in a number of #ifdef's
+ in start.S. In preparation for adding support for NAND SPL
+ the macro CONFIG_PRELOADER is introducted and replaces the
+ CONFIG_ONENAND_IPL in start.S.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit 8096c51fd4e611ed666dbe77767e81af5d94fc7b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jun 13 12:50:04 2009 +0200
+
+ at91: unify nor boot support
+
+ the lowlevel init sequence is the same so unify it
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1b3b7c640d04df2ba9a9d947117d112a75fee7f4
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jun 13 12:48:36 2009 +0200
+
+ at91sam9263ek: add nor flash support
+
+ this will allow you to store use it for the env and to boot directly U-Boot from
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 329492329700812c6df275aa0fda09d609cd0fd4
+Author: Ilko Iliev <iliev@ronetix.at>
+Date: Fri Jun 12 21:20:39 2009 +0200
+
+ at91: add support for the PM9261 board of Ronetix GmbH
+
+ The PM9261 board is based on the AT91SAM9261-EK board.
+
+ Here is the page on Ronetix website:
+ http://www.ronetix.at/starter_kit_9261.html
+
+ Signed-off-by: Ilko Iliev <iliev@ronetix.at>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 01550a2b650fbabc03334f9eadcc6083601a2414
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Jun 12 21:20:38 2009 +0200
+
+ pm9263: use macro instead of hardcode value for the lowlevel_init
+
+ optimize a few the RAM init
+
+ Signed-off-by: Ilko Iliev <iliev@ronetix.at>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7a11c7f9747240dc770954d320569596c0fbcb50
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Jun 12 21:20:37 2009 +0200
+
+ pm9263: lowlevel init update
+
+ move PSRAM init to pm9263.c
+ this will allow us after to make the nor lowlevel_init generic
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 3e88337b225bf796f6df21d0a7f591530e9d4ce0
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Jun 15 00:25:19 2009 -0400
+
+ Blackfin: move ALL += u-boot.ldr to blackfin_config.mk
+
+ The way the ALL variable is used allows for config.mk's to add more
+ targets themselves without having to clutter up the top level Makefile.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit afac8b07172d7e4a65f86ce1ec4c783a6165ba1f
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 14 22:29:35 2009 -0400
+
+ Blackfin: fix SPI flash speed define name
+
+ The SPI flash define is named CONFIG_SF_DEFAULT_SPEED, not
+ CONFIG_SF_DEFAULT_HZ, so fix the typos in the Blackfin boards.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 9ae55ccf601de7a5b75eb418f3fc3d5eca92c106
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 14 22:26:31 2009 -0400
+
+ Blackfin: enable -O2 in lib_generic/ for ADI/Bluetechnix boards
+
+ Building the compression code in lib_generic/ with -O2 rather than -Os
+ gives a nice speed boost without too much code size increase.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit fea63e2a44f0db51d2e39ee7793e8c6d7f3cf5d4
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 14 21:23:27 2009 -0400
+
+ Blackfin: bf548-ezkit: bump up monitor size
+
+ The latest version of U-Boot got a bit fatter in the BSS section which
+ caused overflows in the RAM region, so increase the monitor size.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit bc43a8d8994c2f0be29e09b13b15da7f79e2c081
+Author: Vivi Li <vivi.li@analog.com>
+Date: Fri Jun 12 10:53:22 2009 +0000
+
+ Blackfin: bf533-stamp/bf537-stamp: fix env settings for SPI flash
+
+ The SPI flash layer is much stricter about sector usage than the eeprom
+ layer we used to use, so update the env settings to better match the
+ sector alignment of the flashes we use.
+
+ Signed-off-by: Vivi Li <vivi.li@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 63cb0f4eb2d3cf15e7a1add19d1289f4ae75816c
+Author: Vivi Li <vivi.li@analog.com>
+Date: Fri Jun 12 10:33:23 2009 +0000
+
+ Blackfin: bump up default JTAG console timeout
+
+ The debug tools that interface with the other side of the JTAG console
+ got much slower when generalizing things, so bump up the default timeout
+ value on the U-Boot side to cope. Hopefully at some point we can improve
+ the debug tools to speed things back up.
+
+ Signed-off-by: Vivi Li <vivi.li@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c11ff779f4e0e0c7edc322e84dd229ad28709595
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Jun 1 19:08:33 2009 -0400
+
+ Blackfin: add jtagconsole helper script
+
+ This script is similar to the netconsole script, but instead works with
+ the JTAG console device driver that exists on Blackfin parts.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 60f61e6d7655400bb785a2ef637581679941f6d1
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Sat May 2 21:49:18 2009 +0200
+
+ Convert DM9000 driver for CONFIG_NET_MULTI
+
+ All drivers need to be converted to CONFIG_NET_MULTI.
+ This patch converts the dm9000 driver.
+
+ Signed-off-by: Thomas Smits <ts.smits@gmail.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 9131589ada4dda0718604d0a425ca46e52775f6e
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Sun Jun 14 22:33:46 2009 +0530
+
+ net: Add Marvell Kirkwood gigabit ethernet driver
+
+ This patch adds a egiga driver for the Marvell Kirkwood SoC's.
+
+ Contributors:
+ Yotam Admon <yotam@marvell.com>
+ Michael Blostein <michaelbl@marvell.com
+
+ Reviewed-by: Ronen Shitrit <rshitrit@marvell.com>
+ Acked-by: Stefan Rose <sr@denx.de>
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 7835f4b94927ecb5affd99aad62592108db606ad
+Author: s-paulraj@ti.com <s-paulraj@ti.com>
+Date: Tue May 12 11:45:34 2009 -0400
+
+ DaVinci Network Driver Updates
+
+ Different flavours of DaVinci SOC's have differences in their EMAC IP
+ This patch does the following
+ 1) Updates base addresses for DM365
+ 2) Updates MDIO frequencies for DM365 and DM646x
+ 3) Update EMAC wrapper registers for DM365 and DM646x
+
+ Patch applies to u-boot-net git. the EMAC driver itself
+ will be updated shortly to add support for DM365 and DM646x
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 44578bea14e49035331a8f0e000e935e0d830ff4
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Tue May 26 08:29:29 2009 -0400
+
+ Subject: [PATCH] [repost] Standardize the use of MCFFEC_TOUT_LOOP as a udelay(1) loop counter.
+
+ From 584b5fbd4abfc43f920cc1c329633e03816e28be Mon Sep 17 00:00:00 2001
+ From: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+ Date: Wed, 20 May 2009 18:26:01 -0400
+ Subject: [PATCH] Standardize the use of MCFFEC_TOUT_LOOP as a udelay(1) loop counter.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit c9a2aab1512fb2d132670fff9c27656d2eb949cd
+Author: Norbert van Bolhuis <nvbolhuis@aimvalley.nl>
+Date: Thu Jun 4 09:39:48 2009 +0200
+
+ A VLAN tagged DHCP request/discover is 4 bytes short
+
+ The problem is that BOOTP_SIZE uses ETHER_HDR_SIZE which is 14 bytes.
+ If sending a VLAN tagged frame (when env variable vlan is set) this
+ should be VLAN_ETHER_HDR_SIZE=18 which is what NetSetEther returns.
+
+ Signed-off-by: Norbert van Bolhuis <nvbolhuis@aimvalley.nl>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 6e0d2fc7fe0dcfa2f51ab8931d706940ee364193
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Tue Apr 28 16:39:19 2009 -0700
+
+ Remove support for non-CONFIG_NET_MULTI on PPC4xx EMAC
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 8453587ef9137daf98b7c9cf4f3b865f4039cea0
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Tue May 26 00:34:07 2009 -0700
+
+ Switched davinci_emac Ethernet driver to use newer API
+
+ Added CONFIG_NET_MULTI to all Davinci boards
+ Removed all calls to Davinci network driver from board code
+ Added cpu_eth_init() to cpu/arm926ejs/cpu.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 8cc13c13f1d154c8fa8fff56cea357ed38af76bf
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Mon Apr 27 23:19:10 2009 -0700
+
+ Initial cleanup of Davinci Ethernet driver
+
+ Removed pointless #ifdefs
+ Moved functions around in file in preparation for switch to newer API
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 09cdd1b9b01450e91786d26ff3c866dc9c8d8d6b
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Tue May 26 00:17:59 2009 -0700
+
+ Moved Davinci Ethernet driver to drivers/net
+
+ This driver has been renamed davinci_emac.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 6f51deb7f298413cfcb0a36d24c97ef7dd69d48f
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Tue May 19 01:40:16 2009 +0530
+
+ Marvell MV88E61XX Switch Driver support
+
+ Chips supported:-
+ 1. 88E6161 6 port gbe swtich with 5 integrated PHYs
+ 2. 88E6165 6 port gbe swtich with 5 integrated PHYs
+ 2. 88E6132 3 port gbe swtich with 2 integrated PHYs
+ Platform specific configuration supported for:-
+ default or router port vlan configuration
+ led_init configuration
+ mdip/n polarity reversal configuration
+
+ Note: This driver is supported and tested against
+ kirkwood egiga interface
+
+ Contributors:
+ Yotam Admon <yotam@marvell.com>
+ Michael Blostein <michaelbl@marvell.com
+
+ Reviewed by: Ronen Shitrit <rshitrit@marvell.com>
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 091dc9f6adaf572b067ae91af92c4e7db33d7903
+Author: Zach LeRoy <zleroy@xes-inc.com>
+Date: Fri May 22 10:26:33 2009 -0500
+
+ tsec: Add support for BCM5482S PHY
+
+ Signed-off-by: Zach LeRoy <zleroy@xes-inc.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 9ff67e5e4c719556d57f136a6453f8e4798d85c0
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 14 06:29:07 2009 -0400
+
+ Blackfin: unify u-boot linker scripts
+
+ All the Blackfin linker scripts were duplicated across the board dirs with
+ no difference save from the semi-often used ENV_IS_EMBEDDED option. So
+ unify all of them in the lib_blackfin/ dir and for the few boards that
+ need to embedded the environment directly, add a LDS_BOARD_TEXT define for
+ them to customize via their board config file. This is much simpler than
+ forcing them to duplicate the rest of the linker script.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit f52efcae98cbb8a39f1d0535df8d9646a776af9e
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri May 29 17:02:37 2009 -0400
+
+ Blackfin: bf518f-ezbrd: enable SST SPI flash driver
+
+ The BF51xF parts have an internal SST SPI flash, so make sure the driver is
+ enabled by default so we can access it.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit f348ab85f741dc98b2d202c04b5f430eace94925
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Apr 24 17:22:40 2009 -0400
+
+ Blackfin: convert specific pre/post config headers to common method
+
+ The Blackfin port was using asm/blackfin-config-{pre,post}.h to setup
+ common Blackfin board defines. The common method now is to use config.h,
+ so convert blackfin-config-post.h to that. Rename the still Blackfin
+ specific blackfin-config-pre.h to config-pre.h so the naming conventions
+ at least line up.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 7c7503ee6cd03c0f3b16e98d33d5aa23b30d65b1
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Apr 24 17:11:47 2009 -0400
+
+ Blackfin: enable LZMA for all ADI boards
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 0e63dc0679451d48f8b727c543ce48b488f7a33f
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Apr 13 05:52:45 2009 -0400
+
+ Blackfin: make default ADI env more flexible
+
+ Allow boards to easily override the root= and default bootcmd, allow
+ people to tweak the file used in default bootcmds at runtime via one env
+ var, and add a stock nandboot command.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 0f52b560f19623ec651f9b9b40405d138ec251d3
+Author: Hoan Hoang <hnhoan@i-syst.com>
+Date: Sun Jan 18 22:44:17 2009 -0500
+
+ Blackfin: ibf-dsp561: new board port
+
+ Signed-off-by: Hoan Hoang <hnhoan@i-syst.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 3088189a15d219c48fd7e71623ca4daa08b80b59
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 23:28:33 2008 -0400
+
+ Blackfin: blackstamp: new board port
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 59ac9729700db1d4446c1a6db3ffe38398b7abb2
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 23:22:25 2008 -0400
+
+ Blackfin: bf537-srv1: new board port
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d7fdc1410b5fa5ef623b35a283733b6bcee3753b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 23:16:52 2008 -0400
+
+ Blackfin: bf537-minotaur: new board port
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit cb4b5e874f3c9b882a6f4394bbebbbd91fd01bbf
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 23:08:03 2008 -0400
+
+ Blackfin: bf537-pnav: new board port
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 59e4be945b6469e31eee721e0bcdccf4940d75ac
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 21:55:45 2008 -0400
+
+ Blackfin: cm-bf527: new board port
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8b219cf07c186cc9d97354cf4b14f24a53d193c5
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 21:54:07 2008 -0400
+
+ Blackfin: cm-bf548: new board port
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 9417d9a21384279308abe5b4dd8dfd418742484c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 21:49:28 2008 -0400
+
+ Blackfin: tcm-bf537: new board port
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit e548321af00e869af7194896576beb9b68457ff7
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 21:45:05 2008 -0400
+
+ Blackfin: cm-bf561: new board port
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8a9bab08a6fe93e5f3bf57b90438f1d2a67fad3c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 21:41:06 2008 -0400
+
+ Blackfin: cm-bf537e: new board port
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit e82d8a1f028bedb12c4ab88a35a935010d92898c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 21:36:22 2008 -0400
+
+ Blackfin: cm-bf533: new board port
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit dd14af7640f7d48d8e9768eeeb09592e6f94ed38
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Nov 27 16:50:32 2008 -0500
+
+ Blackfin: new spibootldr command
+
+ Newer Blackfin parts can an on-chip ROM that can boot LDRs over SPI flashes,
+ so add a new 'spibootldr' command to take advantage of it.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 67c2829b646bb5b859088b36fbc89e971b9c1960
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 04:42:33 2008 -0400
+
+ Blackfin: support embedding the environment into loader files (LDRs)
+
+ For the most part, the Blackfin processor boots files in the LDR format
+ rather than binary/ELF files. So we want to export the environment as a
+ raw blob to the LDR utility so it can embed it at the right location.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 31f30c9eb60d9ab0bd702e31f66345f99b34bdc6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 14 11:03:48 2009 -0400
+
+ add %.c->%.i and %.c->%.s rules
+
+ The Linux kernel has some helper rules which allow you to quickly produce
+ some of the intermediary files from C source. Specifically, you can
+ create .i files which is the preprocessed output and you can create .s
+ files which is the assembler output. This is useful when you are trying
+ to track down header/macro expansion errors or inline assembly errors.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6d1ce387874c1060f27656f70151a52c511cd0e3
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat May 30 01:02:03 2009 -0400
+
+ make sure toplevel $(SUBDIRS) is always declared
+
+ The $(SUBDIRS) variable is only declared when U-Boot has been configured,
+ but it gets used all the time. In the non-configured case, it is used to
+ generate a helpful error message, but it needs to be set properly for that
+ to occur.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 1260233982f7dfbdfd1adee12daa95a0c0e84a43
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Fri Jun 12 11:33:55 2009 +0200
+
+ digsy mtc: Add description to GPIO initial configuration.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 12304871bc7839145f2b4238923e9023616d7399
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Fri Jun 12 11:33:54 2009 +0200
+
+ digsy MTC: Add 'mtc' command.
+
+ New command allows to:
+ o check FW version
+ o set LED status
+ o set digital output status
+ o get digital input status
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit f1f66edfc76f4a9f5b9f63972d90309784a8cae5
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Fri Jun 12 11:33:53 2009 +0200
+
+ digsy MTC: Add SPI support.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 6325b7780dad8be26ba6fc25ef88ba338c50205b
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Fri Jun 12 11:33:52 2009 +0200
+
+ mpc52xx: Add SPI driver.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 5ec5529b82f314ca2cf9c262cdfc985d5fc468a0
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 14 09:33:00 2009 -0400
+
+ allow boards to customize compiler options on a per-file/dir basis
+
+ With our Blackfin boards, we like to build the compression routines with
+ -O2 as our tests show a pretty good size/speed tradeoff. For the rest of
+ U-Boot though, we want to stick with the default -Os as that is mostly
+ control code. So in our case, we would add a line like so to the board
+ specific config.mk file:
+ CFLAGS_lib_generic += -O2
+
+ Now all files under lib_generic/ will have -O2 appended to their build.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6b1f78ae6ad037382ad430b07064105c88f7ac02
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jun 14 21:30:39 2009 +0200
+
+ Prepare v2009.06
+
+ Update CHANGELOG, fix minor coding stylke issue. Update Makefile.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c3147c1762f8caf99649051116a2411bdf887c10
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jun 14 20:31:36 2009 +0200
+
+ Revert "SMC911x driver fixed for NFS boot"
+
+ This reverts commit ca9c8a1e10fac01e6a1129f82a7ce18bd818fa43,
+ which causes compile warnings ("large integer implicitly truncated
+ to unsigned type") on all systems that use this driver. The warning
+ results from passing long constants (TX_CFG, RX_CFG) into
+ smc911x_set_mac_csr() which is declared to accept "unsigned
+ character" arguments only.
+
+ Being close to a release, with nobody available to actually test the
+ code or the suggested fixes, it seems better to revert the patch.
+
+commit 388517e4b745b00256c2fa201ce7bccb67b4f245
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri May 22 10:26:37 2009 -0500
+
+ xes: Update Freescale clock code to work with 86xx processors
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 25623937bb81cae788d767e6c59a11c96fc82866
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri May 22 10:26:36 2009 -0500
+
+ xes: Update Freescale DDR code to work with 86xx processors
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit bef3013908bbc68f24084174a3ca86cc2a3eb986
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri May 22 10:26:35 2009 -0500
+
+ xes: Update Freescale PCI code to work with 86xx processors
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6442b71b522face775c1c31bd43121db3b4bf7d6
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri May 22 10:26:32 2009 -0500
+
+ 85xx: Add PORBMSR and PORDEVSR shift defines
+
+ Add defines similar to those already used for the the 86xx architecture.
+ This will ease sharing of PCI code between the 85xx and 86xx
+ architectures.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2f21ce4d546d31289ac49a680f78bcc9a792c6ec
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Thu May 21 12:10:00 2009 -0500
+
+ fsl/85xx, 86xx: Sync up DMA code
+
+ The following changes were made to sync up the DMA code between the 85xx
+ and 86xx architectures which will make it easier to break out common
+ 8xxx DMA code:
+
+ 85xx:
+ - Don't set STRANSINT and SPCIORDER fields in SATR register. These bits
+ only have an affect when the SBPATMU bit is set.
+ - Write 0xffffffff instead of 0xfffffff to clear errors in the DMA
+ status register. We may as well clear all 32 bits of the register...
+
+ 86xx:
+ - Add CONFIG_SYS_MPC86xx_DMA_ADDR define to address DMA registers
+ - Add clearing of errors in the DMA status register when initializing
+ the controller
+ - Clear the channel start bit in the DMA mode register after a transfer
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit b1f12650d332eadac1306a772cab6096abee6ddd
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Thu May 21 12:09:59 2009 -0500
+
+ fsl: Create common fsl_dma.h for 85xx and 86xx cpus
+
+ Break out DMA structures for the Freescale MPC85xx and MPC86xx cpus to
+ reduce a large amount of code duplication
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3bd8e532b5de20647aeaff94a1cbf33fb8b897b9
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed May 20 12:30:41 2009 -0400
+
+ 85xx: Add UEC6 and UEC8 at SGMII mode for MPC8569MDS
+
+ On MPC8569MDS board, UCC6 and UCC8 can be configured to work at SGMII mode via
+ UEM on PB board. Since MPC8569 supports up to 4 Gigabit Ethernet ports, we
+ disable UEC6 and UEC8 by default.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e8efef7c1b457442583a8b9d38d8a5b667661616
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Thu Jun 4 16:12:42 2009 -0400
+
+ drivers/qe: add sgmii support in for UEC driver
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8e55258f144764de8902e9f078a7ad4c6c022c2f
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Thu Jun 4 16:12:41 2009 -0400
+
+ qe: Pass in uec_info struct through uec_initialize
+
+ The uec driver contains code to hard code configuration information for the uec
+ ethernet controllers. This patch creates an array of uec_info structures, which
+ are then parsed by the corresponding driver instance to determine configuration.
+ It also creates function uec_standard_init() to initialize all UEC interfaces
+ for 83xx and 85xx.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9a6110897fc9282ade598bbba70ad72b940436e3
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Thu Jun 4 16:12:40 2009 -0400
+
+ fsl: Update the number of ethxaddr in reading system eeprom
+
+ We support up to 8 mac addresses in system eeprom, so we define the macro
+ MAX_NUM_PORTS to limit the mac_count to 8, and update the number of ethxaddr
+ according to mac_count.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f82107f637f167a77803c0933f9b24741a91c711
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed May 20 12:30:37 2009 -0400
+
+ 85xx: Add RMII support for MPC8569MDS
+
+ This patch supports UCC working at RMII mode on PIB board, fixup fdt blob to
+ support rmii in kernel. It also changes the name of enable_mpc8569mds_qe_mdio to
+ enalbe_mpc8569mds_qe_uec which is more accurate.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 750098d33bc362ac4263863e92da158cf011063f
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed May 20 12:30:36 2009 -0400
+
+ 85xx: Add UEC3 and UEC4 support for MPC8569MDS
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 4e7b25e4fe777f525e426cbd58c3a3976c564f2e
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed May 20 12:30:35 2009 -0400
+
+ drivers/qe: Add more SNUM number for QE
+
+ Some QE chips like 8569 need more SNUM numbers for supporting 4 UECs in RGMII-
+ 1000 mode.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Acked-by: Timur Tabi <timur@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 7211fbfa18f3061858696150ee6e9e093d9eceae
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Thu May 21 15:34:14 2009 -0400
+
+ drivers/qe: Change QE RISC ALLOCATION to support 4 RISCs
+
+ Also define the QE_RISC_ALLOCATION_RISCs to MACROs instead of using enum, and
+ define MAX_QE_RISC for QE based silicons.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Acked-by: Timur Tabi <timur@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit b3d7f20f43a0f8d11c65e2f92153b5512b11580c
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed May 20 12:30:29 2009 -0400
+
+ 85xx: Add QE clk support
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Acked-by: Timur Tabi <Timur@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 71b358cc26792889bbac35054d8e89d59b3fabc4
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed May 20 01:11:33 2009 -0500
+
+ 85xx: Added MPC8535/E identifiers
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 22419d77976bbd0df9fcf45513f1b96bd73e50d1
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu May 21 08:36:43 2009 -0500
+
+ 85xx: Always attempt ethernet device tree fixup
+
+ Its reasonable that we may have ethernet devices but dont have drivers
+ or support enabled for them in u-boot and want the device tree fixed up.
+ Unconditionally calling the ethernet fixup is fine since if we dont have
+ ethernet nodes that match (or aliases) we will not attempt to do
+ anything.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Timur Tabi <timur@freescale.com>
+
+commit 52d6ad5ecfb22938441c8e3e62935fbd7b0f0920
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Thu May 21 15:32:13 2009 -0400
+
+ drivers/qe: Rename the camel-case identifiers in uec
+
+ Rename riscRx/riscTx to risc_rx/risc_tx to comply with Codingstyle.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit feb7838f979ec2b581df3c791b9ae3284c36bb47
+Author: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+Date: Fri Apr 3 15:36:13 2009 -0500
+
+ 85xx: Add P2020DS support
+
+ The patch adds support for P2020DS reference platform.
+ DDR3 interface uses hard-coded initialization rather than SPD
+ for now and was tested at 667Mhz. Some PIXIS register
+ definitions and associated code sections need to be fixed.
+ TSEC1/2/3, NOR flash, MAC/SYS ID EEPROM, PCIE1/2/3 are all
+ tested under u-boot.
+
+ Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+ Signed-off-by: Travis Wheatley <Travis.Wheatley@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 229549a56d9ae413c00f64fd7c728c6879a1b54b
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jun 9 16:57:47 2009 +0200
+
+ mpc512x: MPC5121ADS: Add NAND support
+
+ This patch adds NAND support to the MPC5121ADS board. Please
+ note that the image size increased since NAND support didn't
+ fit in the current image size (256k).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Wolfgang Denk <wd@denx.de>
+
+commit 35f2edbb6cad043ccd5ea6e78fe9b7aa21d8395f
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jun 9 16:57:03 2009 +0200
+
+ nand/mpc512x: Add MPC512x NAND support (NFC)
+
+ This patch adds NAND Flash Controller driver for MPC5121 revision 2.
+ All device features, except hardware ECC and power management, are
+ supported.
+
+ This NFC driver replaces the one orignally posted by John Rigby:
+
+ "[PATCH] Freescale NFC NAND driver"
+
+ It's a port of the Linux driver version posted by Piotr Ziecik a few
+ weeks ago. Using this driver has the following advantages (from my
+ point of view):
+
+ - Compatibility with the Linux NAND driver (e.g. ECC usage)
+ - Better code quality in general
+ - Resulting U-Boot image is a bit smaller (approx. 3k)
+ - Better to sync with newer Linux driver versions
+
+ The only disadvantage I can see, is that HW-ECC is not supported right
+ now. But this could be added later (e.g. port from Linux driver after
+ it's supported there). Using HW-ECC on the MCP5121 NFC has a general
+ problem because of the ECC usage in the spare area. This collides with
+ JFFS2 for example.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Piotr Ziecik <kosmo@semihalf.com>
+ Cc: Wolfgang Denk <wd@denx.de>
+ Cc: John Rigby <jcrigby@gmail.com>
+ Cc: Scott Wood <scottwood@freescale.com>
+
+commit e53b507cee5d976953134a565c72fd32c967d7dd
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jun 9 11:50:40 2009 +0200
+
+ mpc512x: Add esd gmbh mecp5123 board support
+
+ MECP5123 is a MPC5121E based module by esd gmbh.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+
+commit 6bd55cc65d0c3aa84d719518254fb3c650239ed9
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jun 9 11:50:05 2009 +0200
+
+ mcp512x: Add macros for SCFR LPC divisor access
+
+ Thos macros will be used by the esd mecp5123 board.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c60dc8527dbb2a1318c03bc18bdebcfbd0164551
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jun 8 09:38:07 2009 +0200
+
+ mpc512x: Fix problem with I2C access before relocation
+
+ This is needed for the upcoming esd MECP5123 board port which uses
+ I2C EEPROM for environment storage.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+ Acked-by: Heiko Schocher<hs@denx.de>
+
+commit 58f10460b05e0928d986b15edd4f2e1e99403f7e
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jun 4 13:35:39 2009 +0200
+
+ 74xx_7xx: CPCI750: Add CPCI adapter/target support
+
+ The CPCI750 can be built as CPCI host or adapter/target board. This patch
+ adds support for runtime detection of those variants.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+
+commit ae7a2739d7a0704437376e229bb21940952c55be
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 5 05:45:41 2009 +0200
+
+ 74xx_7xx: CPCI750: Enable access to PCI function > 0
+
+ The Marvell bridge 64360 supports serveral PCI functions, not only 0. This
+ patch enables access to those functions.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+
+commit e5b563e9ec54c3f6d702c8fa2b711b4a6150243a
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jun 4 13:35:37 2009 +0200
+
+ 74xx_7xx: CPCI750: Minor coding style cleanup of cpci750.c
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+
+commit 0e5ef07d0d91bd3d87ebea0534f538561aa974d5
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jun 4 13:35:36 2009 +0200
+
+ 74xx_7xx: CPCI750: Add loadpci command
+
+ This command is used to load/boot an OS-image which is transferred from
+ the CPCI host to the CPCI target/adapter.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+
+commit 0a14d6b8f4d21ff59a9b7686a49a77069a9fcd2a
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jun 4 13:35:35 2009 +0200
+
+ 74xx_7xx: CPCI750: Add commandline editing/history
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+
+commit 60cfe87bd39e6f07f2b92eb4bff82bfd105f4724
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jun 4 16:55:34 2009 +0200
+
+ UBI: Add compile-time check for correct malloc area configuration
+
+ UBI is quite memory greedy and requires at least approx. 512k of malloc
+ area. This patch adds a compile-time check, so that boards will not
+ build with less memory reserved for this area (CONFIG_SYS_MALLOC_LEN).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7ce6031afc8671c8b47c6135b3678d43fcd02852
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Mon Apr 6 21:24:43 2009 +0530
+
+ sf: new Macronix MX25xx SPI flash driver
+
+ Added macronix SF driver for MTD framework
+ MX25L12805D is supported and tested
+ TBD: sector erase implementation, other deivces support
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2a6cc58869305f346e389eefdfa96dea5146cb0c
+Author: Todor I Mollov <tmollov@ucsd.edu>
+Date: Sat Apr 4 07:14:44 2009 -0400
+
+ sf: atmel: implement power-of-two write/erase funcs
+
+ Signed-off-by: Todor I Mollov <tmollov@ucsd.edu>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 4bc6eb79be2a7317425575184324b94e3b43fbc2
+Author: Vivek Mahajan <vivek.mahajan@freescale.com>
+Date: Mon May 25 17:23:18 2009 +0530
+
+ mpc85xx: 8536ds: Add USB related CONFIGs
+
+ This patch adds CONFIGs for enabling USB in mpc8536ds and also
+ adds usb_phy_type in CONFIG_EXTRA_ENV_SETTINGS. Also revamps its
+ Copyright.
+
+ Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 6823e9b01290977c4d9c90381459c01f66e12e79
+Author: Vivek Mahajan <vivek.mahajan@freescale.com>
+Date: Mon May 25 17:23:17 2009 +0530
+
+ mpc83xx: 8315erdb: Add USB related CONFIGs
+
+ This patch adds CONFIGs for enabling USB in mpc8315erdb and also
+ adds usb_phy_type in CONFIG_EXTRA_ENV_SETTINGS. Also revamps its
+ Copyright.
+
+ Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit a07bf180efc3c0de4a89a3bd49a7c7584dfb95a8
+Author: Vivek Mahajan <vivek.mahajan@freescale.com>
+Date: Thu May 21 17:32:48 2009 +0530
+
+ mpc85xx: USB: Add support
+
+ The following patch adds 85xx-specific USB support and also
+ revamps Copyright in immap_85xx.h
+
+ Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 4ef01010aa4799c759d75e67007fdd3a38c88c8a
+Author: Vivek Mahajan <vivek.mahajan@freescale.com>
+Date: Mon May 25 17:23:16 2009 +0530
+
+ mpc83xx: USB: Reorganized its support
+
+ The following patch reorganizes/reworks the USB support for mpc83xx
+ as under:-
+
+ * Moves the 83xx USB clock init from drivers/usb/host/ehci-fsl.c to
+ cpu/mpx83xx/cpu_init.c
+
+ * Board specific usb_phy_type is read from the environment
+
+ * Adds USB EHCI specific structure in include/usb/ehci-fsl.h
+
+ * Copyrights revamped in most of the following files
+
+ Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit ed90d2c87158e5114b6009fa95bb6417e4b27b3e
+Author: Vivek Mahajan <vivek.mahajan@freescale.com>
+Date: Thu May 21 17:32:27 2009 +0530
+
+ mpc8xxx: USB: Relocates ehci-fsl.h to include/usb
+
+ The following patch moves 8xxx-specifc USB #defines from
+ drivers/usb/host/ehci-fsl.h to include/usb.
+
+ Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit cfd39cdf9422d3d25e9b3c058865f4c1f66f34da
+Author: Vivek Mahajan <vivek.mahajan@freescale.com>
+Date: Thu May 21 17:32:15 2009 +0530
+
+ mpc8xxx: USB: Removed reenablement of its interface
+
+ To prepare for the 85xx USB support, which requires interface enablement
+ only once in (specified) order, no different than instructions for
+ enabling the interface under 83xx. It is unknown why the original author
+ enabled the interface twice (checked for references in errata, etc).
+
+ Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 2c7920afaf96d9779304202cd8a355b4f7576a83
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri May 22 17:23:25 2009 -0500
+
+ 83xx: Replace CONFIG_MPC83[0-9]X with MPC83[0-9]x
+
+ Use the standard lowercase "x" capitalization that other Freescale
+ architectures use for CPU defines to prevent confusion and errors
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 0f898604945af4543c1525fc33b6bae621a3b805
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri May 22 17:23:24 2009 -0500
+
+ 83xx: Replace CONFIG_MPC83XX with CONFIG_MPC83xx
+
+ Use the standard lowercase "xx" capitalization that other Freescale
+ architectures use for CPU defines to prevent confusion and errors
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit ba4feae90ca71de1681d5808f17e73224d8f03c4
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jun 2 16:53:16 2009 +0200
+
+ mpc512x: Use serial_setbrg() in serial_init() to not duplicate the code
+
+ This patch removes the duplicated code for baudrate generator configuration
+ in the PSC serial_init() implementation by calling serial_setbrg() instead
+ of duplicating the code.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b8c1d6a54ff8195488b68e163de8ec31f1603496
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jun 2 16:53:15 2009 +0200
+
+ mpc512x: Fix PSC divisor calculation for baudrate setting
+
+ The wrong input frequency was used in serial_setbrg(). This patch fixes
+ this by using ips_clk as input frequency for the PSC baudrate generator.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 52568c3654b2b257016d52167805ae132faac14e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 16 10:47:46 2009 +0200
+
+ MPC512x: add support for ARIA board
+
+ ARIA is a MPC5121E based COM Express module by Dave/DENX.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: John Rigby <jcrigby@gmail.com>
+
+commit 3b74e7ec58e2cc352b0a396a614065cfeb8d138f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 16 10:47:45 2009 +0200
+
+ MPC512x: remove include/mpc512x.h
+
+ Move needed definitions (register descriptions etc.) from
+ include/mpc512x.h into include/asm-ppc/immap_512x.h.
+
+ Instead of using a #define'd register offset, use a function that
+ provides the PATA controller's base address.
+
+ All the rest of include/mpc512x.h are register offset definitions
+ which can be eliminated by proper use of C structures.
+
+ There are only a few register offsets remaining that are needed in
+ cpu/mpc512x/start.S; for these we provide cpu/mpc512x/asm-offsets.h
+ which is intended as a temporary workaround only. In a later patch
+ this file will be removed, too, and then auto-generated from the
+ respective C structs.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: John Rigby <jcrigby@gmail.com>
+
+commit a927e491b2a326c1e9c4313e3ce4042988422697
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 16 10:47:44 2009 +0200
+
+ MPC512x FEC: get rid of duplicated struct ethernet_regs
+
+ Use existing struct fec512x instead.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: John Rigby <jcrigby@gmail.com>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 843efb1192cc8fd4f904a23dbab4e0fe3e1c5bc2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 16 10:47:43 2009 +0200
+
+ MPC512x: use I/O accessors instead of pointer accesses
+
+ This commit changes the MPC512x code to use I/O accessor calls (i.e.
+ out_*() and in_*()) instead of using deprecated pointer accesses.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: John Rigby <jcrigby@gmail.com>
+
+commit 19dc7e179268be148e550c36203208c662610d76
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 16 10:47:42 2009 +0200
+
+ MPC512x: add more hardware description to immap_512x.h
+
+ - add GPIO module description
+ - add Address Latch Timing Register description
+ - add IO Control Memory Map
+ - add FEC Memory Map
+
+ Also change board/freescale/mpc5121ads/mpc5121ads.c and
+ cpu/mpc512x/iopin.c as needed.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: John Rigby <jcrigby@gmail.com>
+
+commit 72601d04fdfdd4c7597afcf1f6aab654bd99366c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 16 10:47:41 2009 +0200
+
+ Rename ads5121 board into mpc5121ads
+
+ We rename the board so we use a consistent name in U-Boot and in
+ Linux. Also, we use this opportunity to move the board into the
+ Freecale vendor directory.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: John Rigby <jcrigby@gmail.com>
+
+commit debf87415579c0f50aab9e0832976d4506babe0f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 16 10:47:40 2009 +0200
+
+ cpu/mpc512x/diu.c: fix warning: assignment from incompatible pointer type
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: John Rigby <jcrigby@gmail.com>
+
+commit 8b251263191ec554967dd1add6237c1ba7f7eb25
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 16 10:47:39 2009 +0200
+
+ cpu/mpc512x/pci.c: minor coding style cleanup
+
+ Get rid of variable declaration in the middle of the code.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: John Rigby <jcrigby@gmail.com>
+
+commit de26ef99bddbce4ed225f93afcf0bee99c3b6f87
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 16 10:47:38 2009 +0200
+
+ mpc512x: Move common files to share them by several boards
+
+ We will soon see several new MPC521x based boards added. This patch
+ moves files that are not board specific to a common directory so they
+ can be shared by all such ports. It also splits off common IDE code
+ into a new file, cpu/mpc512x/ide.c .
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: John Rigby <jcrigby@gmail.com>
+
+commit 03e069dc0a765d506f78a68319acf33d432e035b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 16 10:47:37 2009 +0200
+
+ mpc512x: change cpu/mpc512x/Makefile to use Kconfig style
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: John Rigby <jcrigby@gmail.com>
+
+commit a89c33db96a1e55319a286dd4c3c05ca64ac6bfd
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun May 24 17:06:54 2009 +0200
+
+ General help message cleanup
+
+ Many of the help messages were not really helpful; for example, many
+ commands that take no arguments would not print a correct synopsis
+ line, but "No additional help available." which is not exactly wrong,
+ but not helpful either.
+
+ Commit ``Make "usage" messages more helpful.'' changed this
+ partially. But it also became clear that lots of "Usage" and "Help"
+ messages (fields "usage" and "help" in struct cmd_tbl_s respective)
+ were actually redundant.
+
+ This patch cleans this up - for example:
+
+ Before:
+ => help dtt
+ dtt - Digital Thermometer and Thermostat
+
+ Usage:
+ dtt - Read temperature from digital thermometer and thermostat.
+
+ After:
+ => help dtt
+ dtt - Read temperature from Digital Thermometer and Thermostat
+
+ Usage:
+ dtt
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 94796d8544d4248028141bad11c6a74b840e9d6e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun May 24 19:17:29 2009 +0200
+
+ Make "usage" messages more helpful.
+
+ In case of incorrect command invocations U-Boot used to print pretty
+ useless "usage" messages, for example:
+
+ => nand markbad
+ Usage:
+ nand - NAND sub-system
+
+ In the result, the user would have to run the "help" command to get
+ the (available) information about correct command usage. Change this,
+ so that this information gets always printed.
+
+ Note that this changes the user interface of all commands, but
+ hopefully to the better.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4c94f6c54bbc4dc5f418da01d8ec01e2adf636be
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun May 24 02:26:19 2009 -0400
+
+ nvedit: speed up printing of environment
+
+ The printing code would check the same environment byte multiple times and
+ write to the console one byte at a time. For some devices (such as the
+ Blackfin JTAG console which operates in 8 bytes at a time), this is pretty
+ damned slow. So create a small 16 byte buffer to fill up and send to puts
+ as needed. In the process, unify the different print functions, shrink
+ the resulting code (source and compiled), and avoid excess env reads as
+ those too can be somewhat expensive depending on the board.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 3112030a430553768de5d30c05bedf8710784452
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 22 19:28:52 2009 +0200
+
+ config.mk: remove un-needed REMOTE_BUILD check
+
+ as $(obj) is empty when in tree build
+
+ %.s: %.S
+ $(CPP) $(AFLAGS) -o $@ $<
+
+ and
+
+ $(obj)%.s: %.S
+ $(CPP) $(AFLAGS) -o $@ $<
+
+ are the same
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 651351fe980b20217b014b9a888398f18d77951c
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Wed May 20 07:55:41 2009 -0500
+
+ FAT replace compare_sign with strncmp.
+
+ The static function compare_sign is only used to compare the fs_type string
+ and does not do anything more than what strncmp does.
+
+ The addition of the trailing '\0' to fs_type, while legal, is not needed
+ because the it is never printed out and strncmp does not depend on NULL
+ terminated strings.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit ecb1dc892297d5d99876907328fed732feefeab2
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed May 20 04:35:14 2009 -0400
+
+ Add support for Linux-like kallsysms
+
+ The kernel stores address<->symbol names in it so things can be decoded at
+ runtime. Do it in U-Boot, and we get nice symbol decoding when crashing.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 36c9169aa6f79ddf604a3bca64e145654f94888b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun May 17 16:01:54 2009 +0200
+
+ cmd_mtdparts.c: allow to omit definitions for default settings
+
+ There is actually no good reason to enforce that all board
+ configuations must define default settings for "mtdids" and
+ "mtdparts". Actually this may be difficult to handle, especially on
+ boards where different sizes of flash chips can be fit, so there is no
+ real "default" partition map for all boards.
+
+ Lift this arbitrary limitation.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 864aa034f3a0e10ce710e8bbda171df3cab59414
+Author: Stefan Roese <sr@denx.de>
+Date: Tue May 12 14:31:56 2009 +0200
+
+ cmd_mtdparts: Move to common handling of FLASH devices via MTD layer
+
+ This patch removes all references to the direct CFI FLASH interface
+ (via flash_info[]). Now that all FLASH types currently handled in
+ mtdparts are available (if selected, see below) via the MTD infrastructure.
+ This is NOR, NAND and OneNAND right now. This can be achieved by defining
+ the following options:
+
+ CONFIG_MTD_DEVICE (for all FLASH types)
+
+ plus
+
+ CONFIG_FLASH_CFI_MTD (for NOR FLASH)
+
+ So we need to add those defines to the board config headers currently
+ using the mtdparts commands. This is done via another patch, so
+ we shouldn't break mtdparts compatibility.
+
+ One big advantage from this solution is that the cmd_mtdparts.c is
+ *much* cleaner now. Lot's of #ifdef's are removed and the code itself
+ is smaller. Additionally the newly added MDT concatenation feature
+ can new be used via the mtdparts infrastructure and therefor via
+ UBI etc.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Ladislav Michl <ladis@linux-mips.org>
+ Cc: Scott Wood <scottwood@freescale.com>
+
+commit d558107c18708050f05b6639b2192efb67c905dc
+Author: Stefan Roese <sr@denx.de>
+Date: Tue May 12 14:31:18 2009 +0200
+
+ mtd: Introduce CONFIG_MTD_DEVICE to select compilation of mtdcore.o
+
+ This new define enables mtdcore.c compilation and with this we can
+ select the MTD device infrastructure needed for the reworked mtdparts
+ command.
+
+ We now have the 2 MTD infrastructure defines, CONFIG_MTD_DEVICE and
+ CONFIG_MTD_PARTITIONS. CONFIG_MTD_DEVICE is needed (as explained above)
+ for the "mtdparts" command and CONFIG_MTD_PARTITIONS is needed for UBI.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Scott Wood <scottwood@freescale.com>
+
+commit 942556a92a8c1eb1bd76584a5143f6f57dcb25ad
+Author: Stefan Roese <sr@denx.de>
+Date: Tue May 12 14:32:58 2009 +0200
+
+ mtd: MTD related config header changes (mtdparts command)
+
+ By changing the cmd_mtdparts to only use the MTD infrastructure and
+ not the direct interface to the CFI NOR FLASH driver we now need
+ to add the MTD infrastructure to all boards using those mtdparts
+ commands. This patch adds those components:
+
+ CONFIG_MTD_DEVICE (for all FLASH types)
+
+ plus
+
+ CONFIG_FLASH_CFI_MTD (for NOR FLASH)
+
+ To all board maintainers: Please test this on your platforms and
+ report any problems/issues found. Thanks.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Wolfgang Denk <wd@denx.de>
+ Cc: Ron Madrid <info@sheldoninst.com>
+ Cc: Georg Schardt <schardt@team-ctech.de>
+ Cc: Michal Simek <monstr@monstr.eu>
+ Cc: Ladislav Michl <ladis@linux-mips.org>
+ Cc: Martin Krause <martin.krause@tqs.de>
+ Cc: Gary Jennejohn <garyj@denx.de>
+ Cc: Ricardo Ribalda <ricardo.ribalda@uam.es>
+
+commit 8d2effea23e938631126a7888008a0637e13b389
+Author: Stefan Roese <sr@denx.de>
+Date: Mon May 11 16:03:55 2009 +0200
+
+ mtd: Update MTD infrastructure to support 64bit device size
+
+ This patch brings the U-Boot MTD infrastructure in sync with the current
+ Linux MTD version (2.6.30-rc3). Biggest change is the 64bit device size
+ support and a resync of the mtdpart.c file which has seen multiple fixes
+ meanwhile.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Scott Wood <scottwood@freescale.com>
+ Cc: Kyungmin Park <kmpark@infradead.org>
+
+commit 0a57265533c412adf6024f4b4955141f4346b2b9
+Author: Stefan Roese <sr@denx.de>
+Date: Tue May 12 14:29:39 2009 +0200
+
+ mtd: Add MTD concat support to concatenate multiple MTD NOR devices
+
+ This patch adds concatenation support to the U-Boot MTD infrastructure.
+ By enabling CONFIG_MTD_CONCAT this MTD CFI wrapper will concatenate
+ all found NOR devices into one single MTD device. This can be used by
+ e.g by UBI to access a partition that spans over multiple NOR chips.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 55e0ed6078b10b0d425b6a0677f38a015c277df6
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Apr 25 14:57:52 2009 +0200
+
+ make MODEM SUPPORT generic instead of duplicate it
+
+ and fix comment
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+ Adjusted Copyright message.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a30f519bd0cde78ba46b424314de94fdab863726
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Tue Jun 2 20:53:56 2009 -0500
+
+ ZOOM2 detect the version of the zoom2 board at runtime.
+
+ There are currently 3 versions of the zoom2 board.
+ The production board, that is currently being released.
+ The beta board, similar in form to the production board but not released.
+ The alpha board, a set of PCBs with a very limited circulation.
+
+ GPIO 94 is used to determine the version of the board. If GPIO 94 is clear,
+ the board is a production board, otherwise it is a beta board.
+
+ The alpha board will likely be mistaken for a beta board. An alpha board
+ was unavailible for testing.
+
+ This has been tested on the beta and production boards.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 718763c4745fd3d987a5576d2a67325e9444f9d4
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Wed Jun 3 01:53:57 2009 -0500
+
+ Beagle Convert the board version detection to use the OMAP3 GPIO interface.
+
+ There is no new functionality in the change.
+
+ This change is a conversion from the using raw register access to using
+ the OMAP3 GPIO API described in doc/README.omap3.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+ Acked-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 7caa13fdd2d3dc957b4e0a228810a3a4a8ba499b
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Wed Jun 3 01:53:55 2009 -0500
+
+ Fix a typo in the instructions on using omap3's gpio interface.
+
+ Using the example for reading a gpio, shows the problem.
+ NULL should be the gpio number.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+ Acked-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 0c9520efd651ce13451654a35307ec87d4a13a69
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Fri May 29 18:57:32 2009 -0500
+
+ ZOOM2 Define GPIO banks used.
+
+ Enable the function and interface clocks for banks 2,3,5 and 6.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+ Acked-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 708cfb74b7c6df9c37d3c48988a154be79daefeb
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Fri May 29 18:57:31 2009 -0500
+
+ OMAP3 Turn on the GPIO bank clocks
+
+ The function and interface clocks for each GPIO bank, except the first, must
+ be explicitly turned on. These are controlled by the config level defines
+ CONFIG_OMAP3_GPIO_n where n is from 2 to 6.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+ Acked-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 59272620c24549b5bcd03c94ba12ec302c1476a2
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Thu Mar 26 15:26:01 2009 -0400
+
+ Coldfire M5271: Activate u-boot system timer interrupt.
+
+ This patch assigns the u-boot system timer interrupt to
+ interrupt level 3, priority 6. Without this patch the interrupt
+ will be a level 0, priority 0, which disables it and cause
+ u-boot functions that relies on the timer (e.g. sleep command)
+ to never return.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit dc26965ad3acdfb18780361d77a276b2843a90af
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Mon Mar 23 13:35:48 2009 -0400
+
+ Compier warning cleanup
+
+ Follow up to git commit: 19b5b533ccd522abeb501d510750693c35e20456
+
+ Cleanup on compiler warnings on unused variables now that
+ bd->bi_enetaddr is no longer used.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit 42a83765d54f042b4079e05a3438789542429981
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Fri Mar 20 15:30:10 2009 -0400
+
+ Adds WATCHDOG_RESET() function call to lib_m68k dtimer_interrupt.
+
+ Ported from lib_ppc/interrupts.c, this adds the ability for
+ the coldfire system timer to auto-reset the watchdog when
+ dtimer_interrupts is called.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit a24d96e40e1ca66dde6e6c158e7ecffafc5a2199
+Author: Prafulla Wadaskar <prafulla@marvell.com>
+Date: Sun May 31 14:53:20 2009 +0200
+
+ arch_misc_init support for ARM architectures
+
+ This patch is required for Kirkwood support
+ may be used by other ARM architectures
+
+ Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
+
+commit b2403589b4d9996394bafc73eca3623f43ac2c31
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 31 14:53:18 2009 +0200
+
+ at91: move cpu info print to cpu
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit b32e189079fa16e1b647ac6b949fd4e0a9435343
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 31 12:44:46 2009 +0200
+
+ at91: move cpu name define to arm/arch/ cpu header
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 5bb59b3c906ee01adfaac9565443e5236a793079
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 31 12:44:45 2009 +0200
+
+ at91: extract reset from timer
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 61cf851b09cf8b67009ec11fc47c16add6b142a5
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 31 12:44:43 2009 +0200
+
+ omap24xx: rename reset file
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9d4fc99dbdbfda1260aad478e83fca7cdf0e1a32
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sun May 31 12:44:42 2009 +0200
+
+ OMAP3: Fix CKE1 MUX setting to allow self-refresh
+
+ The Beagle rev Cx and Overo boards are using both SDRC CSes. The MUX
+ setting is needed for the second CS clock signal to allow the 2 RAM
+ parts to be put in self-refresh correctly. This also works on rev B
+ Beagle boards with 128M of RAM.
+
+ From: Steve Sakoman <steve@sakoman.com>
+ From: Jean Pihet <jpihet@mvista.com>
+ Signed-off-by: Jean Pihet <jpihet@mvista.com>
+ Signed-off-by: Steve Sakoman <steve@sakoman.com>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 3962c4f9fc4482a6547f3c3d3d5e986e625abb8a
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sun May 31 12:44:41 2009 +0200
+
+ OMAP3: Zoom2: Enable Board and CPU info
+
+ With other OMAP3 boards we recently switched to CPU and Board
+ info API. From parallel merge, this is missing for Zoom2.
+ Enable it for Zoom2, too.
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+ Acked-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit 83ae698ff26b81b569ca32f7f2b008ad0da15e66
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Sun May 31 12:44:39 2009 +0200
+
+ ZOOM2 Add led support.
+
+ This patch controls the large LED on the top left of the zoom2.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit 660888b7fb8840ce169dcd2589e49ab44c46b87b
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Sun May 31 12:44:37 2009 +0200
+
+ ZOOM2 Add serial support.
+
+ Zoom2 serial is in general supplied by one of the 4 UARTS on the debug board.
+ The default serial is from the USB connector on left side of the debug board.
+ The USB connector will produce 2 of the 4 UARTS. On your host pick the first
+ enumeration.
+
+ The details of the setting of the serial gpmc setup are not available.
+ The values were provided by another party.
+
+ The serial port set up is the same with Zoom1.
+ Baud rate 115200, 8 bit data, no parity, 1 stop bit, no flow.
+
+ The kernel bootargs are
+ console=ttyS3,115200n8
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit 3ea201b016ab259a5ac8824af767569522768c47
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 31 12:44:27 2009 +0200
+
+ lh7a40x: move serial driver to drivers/serial
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 379be585eb2343d8814a5cee5fb3da930d846bee
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat May 16 22:48:46 2009 +0200
+
+ pxa: move serial driver to drivers/serial
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ad7e8aac6920f8b8a85b3cc2e93bca7458e99aa1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat May 9 13:21:19 2009 +0200
+
+ arm: remove cpu_init
+
+ move s3c44b0 to arch_cpu_init and as noone use cpu_init remove it
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c358d9c3f16571e8f825e81b75eaf32e228cb669
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat May 9 13:21:18 2009 +0200
+
+ arm: unify interrupt init
+
+ all arm init the IRQ stack the same way
+ so unify it in lib_arm/interrupts.c and then call arch specific interrupt init
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 10a451cd57cffbca875c97bbd8929059c5627ec6
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 8 20:24:12 2009 +0200
+
+ arm: unify linker script
+
+ all arm boards except a few use the same cpu linker script
+ so move it to cpu/$(CPU)
+
+ that could be overwrite in following order
+ SOC
+ BOARD
+ via the corresponding config.mk
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9475c63c7855edd863c93a9bb0f4b8e240d9d212
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat May 16 10:02:05 2009 +0200
+
+ afeb9260: fix macb device init
+
+ uses PA10, PA11 for ETX2 and ETX3.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1bbae2b816d4ed38db2ebf42166a973b1ffc0df7
+Author: Stefan Roese <sr@denx.de>
+Date: Wed May 27 10:34:32 2009 +0200
+
+ ppc4xx: Remove PCI async bootup message if PCI is not used
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a3455c00510c5abf1e91743c4a02d8393b6df18d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 15 09:19:52 2009 +0200
+
+ TQM834x: use buffered writes to accelerate writing to flash
+
+ Also enable display of 'E'mpty sectors in "flinfo" output.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 4681e673a51c48f4c096aa3c8fae5e6217ffd58d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu May 14 23:18:34 2009 +0200
+
+ TQM834x: add FDT support
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 929b79a0b5e48303ab04aae9d0abceb0c707f111
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu May 14 23:18:33 2009 +0200
+
+ TQM834x: fix environment size; add redundant env.
+
+ Also reserve more space for U-Boot as it will probably grow soon.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 2ae0f35fd60c7345446835b95a4daff356e1f031
+Author: Thomas Lange <thomas@corelatus.se>
+Date: Sun May 3 20:07:33 2009 +0200
+
+ ARM DaVinci: Reset with watchdog enabled
+
+ Once the Davinci watchdog has been enabled, the timeout
+ value cannot be changed. If the timeout in use is long,
+ it can take a long time for card to reset. By writing
+ an invalid service key, we can trigger an immediate reset.
+
+ Signed-off-by: Thomas Lange <thomas@corelatus.se>
+
+commit 6cc7ba9ed43106946aa9aa868302aa2faf1d17be
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 15 10:07:43 2009 +0200
+
+ video: Add an option to skip video initialization
+
+ This patch adds an option to skip the video initialization on for all
+ video drivers. This is needed for the CPCI750 which can be built as
+ CPCI host and adapter/target board. And the adapter board can't
+ access the video cards located on the CompactPCI bus.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Anatolij Gustschin <agust@denx.de>
+
+ Rebased against simplifying patch.
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f62f64692ff7f6226ad221d5df6487ea5ef39bdd
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 15 10:07:42 2009 +0200
+
+ drv_video_init(): simplify logic
+
+ Simplify nesting of drv_video_init() and use a consistent way of
+ indicating failure / success. Before, it took me some time to realize
+ which of the returns was due to an error condition and which of them
+ indicated success.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Anatolij Gustschin <agust@denx.de>
+
+commit 1699da6297b8c22da16cf85b3c79192f1a6d70ca
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed May 13 21:01:13 2009 +0200
+
+ at91: regroup IP hw init in one file per soc
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 28b00324becf3552134ae1e086509dc9c3d6e932
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Fri May 15 23:48:37 2009 +0200
+
+ dm355 evm support
+
+ Initial U-Boot support for the DaVinci DM355 EVM. This is a board
+ from Spectrum Digital. Board docs include schematic and firmware
+ for its microcontroller:
+
+ http://c6000.spectrumdigital.com/evmdm355/revd/
+
+ Most of the DM355 chip is fully documented by TI, the most notable
+ exception being the MPEG/JPEG coprocessor (programmable using codecs
+ available at no cost from TI), which is omitted from its DM335 sibling:
+
+ http://focus.ti.com/docs/prod/folders/print/tms320dm355.html
+
+ This version can boot from the on-board DM9000 Ethernet chip, after
+ being loaded (from NAND, MMC/SD, or UART). In the near future, NAND
+ and USB support could be added ... NAND support is being held back
+ until the support for the 4-bit ECC hardware is ready.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit 136cf92dc9e84c9a1bf567f1fe741092bf765495
+Author: Sanjeev Premi <premi@ti.com>
+Date: Fri May 15 23:48:37 2009 +0200
+
+ OMAP3EVM: Set default bootfile
+
+ The current configuration doesn't define default
+ bootfile; leading to this warning at execution:
+
+ OMAP3_EVM # dhcp
+ ...
+ ...
+ DHCP client bound to address 192.168.1.11
+ *** Warning: no boot file name; using 'AC18BE16.img'
+ TFTP from server 0.0.0.0; our IP address is 192.168.1.11;
+ sending through gateway 192.168.1.1
+ Filename 'AC18BE16.img'.
+ Load address: 0x82000000
+ Loading: *
+ TFTP error: 'File not found' (1)
+
+ Signed-off-by: Sanjeev Premi <premi@ti.com>
+
+commit 1a09d05abfc6d4d4f1fce9f6bd0275bd1c08d4f5
+Author: s-paulraj@ti.com <s-paulraj@ti.com>
+Date: Fri May 15 23:48:36 2009 +0200
+
+ ARM DaVinci: Minor Updates to base addresses
+
+ Patch adds base addresses for DaVinci DM365. Updated patches for DM365
+ will be posted soon.
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+
+commit de193e8e369f5f029ed3b6e2fc60341098eea766
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Fri May 15 23:48:36 2009 +0200
+
+ ZOOM2 Add support for debug board detection.
+
+ The logicpd web site is a good source for general information on this board.
+ Please start looking here if the below links are broken.
+ http://www.logicpd.com
+
+ This is a pdf of the product
+ http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf
+
+ This is a pdf of the product quick start guide.
+ The debug board is described here.
+ http://support.logicpd.com/downloads/1165/
+
+ This is a wiki showing the debug board in use
+ https://omapzoom.org/gf/project/omapzoom/wiki/?pagename=GettingStartedWithZoomII_AKA_OMAP34XII_MDP
+
+ The zoom2 has an auxillary board that contains the serial, net, jtag and
+ battery simulator. This change supports a runtime check if the debug board is
+ connected.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit 0c872ecd01d6782ae9d37b6eb721404a4a48f356
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Fri May 15 23:48:36 2009 +0200
+
+ OMAP3 Port kernel omap gpio interface.
+
+ Port version 2.6.27 of the linux kernel's omap gpio interface to u-boot.
+ The orignal source is in linux/arch/arm/plat-omap/gpio.c
+
+ See doc/README.omap3 for instructions on use.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit 376aee78dd66ae0dc4ce496cbe93ecc80aaad48e
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Fri May 15 23:48:36 2009 +0200
+
+ ZOOM2 Add initial support for Zoom2
+
+ Zoom2 is a new board from Texas Instruments and LogicPD
+
+ The logicpd web site is a good source for general information on this board.
+ Please start looking here if the below links are broken.
+ http://www.logicpd.com
+
+ This is a pdf of the product
+ http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf
+ This is the product description web page
+ http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap34x-ii-mdp
+
+ This patch provides a zoom2 base target by copying zoom1 and by making some
+ obvious changes.
+
+ To configure, run
+ make omap3_zoom2_config
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit 53925acf1b5c1a1e6230cda2697640cd05bd1104
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Fri May 15 23:48:33 2009 +0200
+
+ ARM DaVinci:Consolidate common u-boot.lds
+
+ The u-boot.lds is common for all DaVinci boards. The patch removes
+ multiple instances and moves the u-boot.lds to /cpu/arm926ejs/davinci
+ folder. This addresses one of the comments i received while submitting
+ patches for DM3xx
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+
+commit 68a531fd465f5c0b3d373e0010afed32e88d37c4
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Fri May 15 23:47:52 2009 +0200
+
+ OMAP Consolidate common u-boot.lds to cpu layer.
+
+ The u-boot.lds file is common for all omap boards.
+ Move a cleaned up version to the cpu layer and add makefile logic to use it.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit 65a76d4f947a193e57bb8f8093c481f27e059f8f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 15 23:47:14 2009 +0200
+
+ arm/dcc: add xscale support
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 66e8f9da6879fe37f3159b3997bff874842dc51d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 15 23:47:14 2009 +0200
+
+ arm/dcc: use static support to allow to use it at anytime
+
+ the dcc can be used at the start of the cpu
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7893aa1eb6f52c3957efc301b436f1fa11e91a00
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 15 23:47:13 2009 +0200
+
+ ARM: Update mach-types
+
+ update against linux v2.6.29
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2907798926ee932f453ac8538e7a6c05c18428a5
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 15 23:47:13 2009 +0200
+
+ arm920/926/926: remove non needed header
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 269dfea017b09c5a999d3053d00505c19789c350
+Author: David Brownell <david-b@pacbell.net>
+Date: Fri May 15 23:47:13 2009 +0200
+
+ davinci dm6446evm NAND update
+
+ This updates the optional (non-default!) NAND support for the
+ DaVinci DM6446 EVM:
+
+ - include MTD partitioning, defaulting to what Linux uses
+
+ - use a flash-based BBT, which among other things speeds bootup
+
+ This matches code that's now queued for mainline Linux, and might
+ even merge in an upcoming 2.6.30-rc; and the MTIDS are set up so
+ that the U-Boot $mtdparts environment variable can be passed as-is
+ on the kernel command line as a cmdlinepart override.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit 7a4f511b59f08f51dde4ceacbd45f49b8bf2a5cc
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Fri May 15 23:47:12 2009 +0200
+
+ davinci: display correct clock info
+
+ Move the clock-rate dumping code into the cpu/.../davinci area
+ where it should have been, enabled by CONFIG_DISPLAY_CPUINFO,
+ updating the format and showing the DSP clock (where relevant).
+
+ Switch boards to use the cpuinfo() hook for this stuff.
+
+ Remove a few now-obsolete PLL #defines.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit daea928829098cae3c9ec6b801e52ba616725034
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Fri May 15 23:47:12 2009 +0200
+
+ ZOOM1 Remove more legacy NAND defines.
+
+ These legacy NAND defines are no longer needed by this target.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit 65fd21c80fcaca2bbfe3ab06ab6ac68207408078
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Fri May 15 23:47:12 2009 +0200
+
+ LED Add documentation describing the status_led and colour led API.
+
+ This document describes the u-boot status LED API.
+ This allows common u-boot commands to use a board's leds to
+ provide status for activities like booting and downloading files.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit 7cdf804f34378b910b4c4edd2dac7e3ca61c0825
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Fri May 15 23:47:12 2009 +0200
+
+ ARM Add blue colour LED to status_led.
+
+ There is exiting support for red,yellow,green but no blue.
+ The main LED on the zoom2 is a blue LED.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit b54384e3ba6b5535751f317fcd3940a53eed0d3a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 15 23:47:02 2009 +0200
+
+ arm: timer and interrupt init rework
+
+ actually the timer init use the interrupt_init as init callback
+ which make the interrupt and timer implementation difficult to follow
+
+ so now rename it as int timer_init(void) and use interrupt_init for interrupt
+
+ btw also remane the corresponding file to the functionnality implemented
+
+ as ixp arch implement two timer - one based on interrupt - so all the timer
+ related code is moved to timer.c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 5b4bebe1d20c4f2b70d48b06aed1016785efcc25
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 15 23:45:22 2009 +0200
+
+ OMAP3: Reorganize Makefile style
+
+ Reformat COBJS handling.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit b1966982718347f67317b3fb356439743ca68a37
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 15 23:45:22 2009 +0200
+
+ OMAP3: Remove dublicated interrupt code
+
+ Remove duplicated interrupt code. Original, identical code can be found
+ in lib_arm/interrupts.c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit ac7260a4190315eba4a6e526c764f6cad0bbf8c5
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 15 23:45:22 2009 +0200
+
+ at91rm9200: move reset code to reset.c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2c75c78d94574ee996db2aa9b511258519471dd6
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 15 23:45:22 2009 +0200
+
+ ixp/interrupts: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 8fc3bb4b0603516ad641e2de252a400b85fd869b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 15 23:45:20 2009 +0200
+
+ arm: cleanup remaining CONFIG_INIT_CRITICAL
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c20e28f49aaf38c7dede46d8f8fe8234fe90822c
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 15 23:45:12 2009 +0200
+
+ arm946es: remove non used timer
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f1d944e30eb8ff89080fa03fb98d8fb5c82388d2
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Fri May 15 23:44:09 2009 +0200
+
+ davinci: add basic dm355/dm350/dm335 support
+
+ Add some basic declarations for DaVinci DM355/DM350/DM335 support,
+ keyed on CONFIG_SOC_DM355. (DM35X isn't quite right because the
+ DM357 is very different; while the DM355 is like a DM355 without
+ the MPEG/JPEG coprocessor).
+
+ These have different peripherals than the DM6446, and some of
+ the peripherals are at different addresses. Notably for U-Boot,
+ there's no EMAC, and the NAND controller address is different
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit bd36fdc146654f9de4e2ad346126e6bd2990fb19
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Fri May 15 23:44:09 2009 +0200
+
+ davinci: fix dm644x buglets
+
+ Fix two buglets in the dm644x support: don't set two must-be-zero
+ bits in the UART management register; and only include the I2C hooks
+ if the I2C driver is being included.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit f79043681ff44bae435c06f830e51e1546db7e19
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Fri May 15 23:44:08 2009 +0200
+
+ davinci: split out some dm644x-specific bits from psc
+
+ Split out DaVinci DM6446-specific bits from more generic bits:
+
+ - Add a CONFIG_SOC_DM644X. All current boards use DM6446 chips;
+ DM6443 and DM6441 chips differ in available peripherals.
+
+ - Move most DM644X-specific bits from psc.c to a new dm644x.c file,
+ which is conditionally built. It provides device-specific setup.
+
+ Plus minor coding style and comment updates with respect to the PSC.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit 48ef5729555f41f51618b6a3016ac5c53c7c75dc
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Fri May 15 23:44:08 2009 +0200
+
+ davinci: cpu-specific build uses conditional make syntax
+
+ Update cpu/arm926ejs/davinci/Makefile to use COBJ-y type syntax.
+ Add the first conditional: for EMAC driver support. Not all
+ chips have an EMAC; and boards might not use it, anyway.
+
+ This doesn't touch PHY configuration; that should eventually
+ become conditional too.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit 7b7808ae6dace59287f565e9323cda7b098a5612
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Fri May 15 23:44:06 2009 +0200
+
+ davinci: move psc support board-->cpu
+
+ Move DaVinci PSC support from board/* to cpu/* where it belongs.
+ The PSC module manages clocks and resets for all DaVinci-family
+ SoCs, and isn't at all board-specific.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit 84f7411cb901b8df2391cf7e967ad0737f6194aa
+Author: David Brownell <david-b@pacbell.net>
+Date: Tue Apr 14 08:52:58 2009 -0700
+
+ DaVinci now respects SKIP_LOWLEVEL_INIT
+
+ Don't needlessly include lowlevel init code; that's only really
+ needed with boot-from NOR (not boot-from-NAND). The 2nd stage
+ loader (UBL) handles that before it loads U-Boot.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit 641e0925e4bf7adf8e2e04e3ad81b840fd71cadd
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Sun Apr 12 22:49:26 2009 -0700
+
+ DaVinci Ethernet cleanup
+
+ Chips without the EMAC controller won't need the utilities
+ it uses to read an Ethernet address from EEPROM; so don't
+ include them needlessly.
+
+ Use is_valid_ether() to validate the address from EEPROM.
+ All-zero addresses aren't the only invalid addresses.
+ A fully erased EEPROM returns all-ones, also invalid...
+
+ Switch those Ethernet utilities to use "%pM" for printing
+ MAC addresses; and not say ROM when they mean EEPROM.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit c790b04d230363d03939dc008bcc80f3ba4de1ae
+Author: Stefan Roese <sr@denx.de>
+Date: Mon May 11 15:50:12 2009 +0200
+
+ lib_arch/board.c: Move malloc initialization before flash_init()
+
+ This patch moves the malloc initialization before calling flash_init().
+ Upcoming changes to the NOR FLASH common CFI driver with optional
+ MTD infrastructure and MTD concatenation support will call malloc().
+ And nothing really speaks against enabling malloc just a little earlier
+ in the boot stage. Some architectures already enable malloc before
+ calling flash_init() so they don't need any changes here.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Wolfgang Denk <wd@denx.de>
+ Cc: Mike Frysinger <vapier@gentoo.org>
+ Cc: Scott McNutt <smcnutt@psyent.com>
+ Cc: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+ Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ Cc: Daniel Hellstrom <daniel@gaisler.com>
+ Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Cc: John Rigby <jcrigby@gmail.com>
+
+commit d873133f2ba9bd613d5f6552c31cc70fb13f15d3
+Author: Stefan Roese <sr@denx.de>
+Date: Mon May 11 13:46:14 2009 +0200
+
+ ppc4xx: Add Sequoia RAM-booting target
+
+ This patch adds another build target for the AMCC Sequoia PPC440EPx
+ eval board. This RAM-booting version is targeted for boards without
+ NOR FLASH (NAND booting) which need a possibility to initially
+ program their NAND FLASH. Using a JTAG debugger (e.g. BDI2000/3000)
+ configured to setup the SDRAM, this debugger can load this RAM-
+ booting image to the target address in SDRAM (in this case 0x1000000)
+ and start it there. Then U-Boot's standard NAND commands can be
+ used to program the NAND FLASH (e.g. "nand write ...").
+
+ Here the commands to load and start this image from the BDI2000:
+
+ 440EPX>reset halt
+ 440EPX>load 0x1000000 /tftpboot/sequoia/u-boot.bin
+ 440EPX>go 0x1000000
+
+ Please note that this image automatically scans for an already
+ initialized SDRAM TLB (detected by EPN=0). This TLB will not be
+ cleared. This TLB doesn't need to be TLB #0, this RAM-booting
+ version will detect it and preserve it. So booting via BDI2000
+ will work and booting with a complete different TLB init via
+ U-Boot works as well.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 837db3d87f4bfe9261629fb4a1bb433506a3056a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed May 6 08:41:45 2009 -0400
+
+ tools/envcrc: add --binary option to export embedded env
+
+ The --binary option to envcrc can be used to export the embedded env as a
+ binary blob so that it can be manipulated/examined/whatever externally.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 18cc7afd9a153a66854af862d14ba01c5496cf07
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Tue Apr 28 16:50:53 2009 -0700
+
+ Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
+
+ All in-tree PPC4xx boards now use CONFIG_NET_MULTI
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 70be6c2d40076f14062b892152649f9a62832fc9
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Apr 29 09:51:01 2009 +0200
+
+ 4xx: Add support for DP405 hardware variants
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit de47a34d4de1d007a8951efd072283516d580ffa
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Apr 29 09:51:00 2009 +0200
+
+ 4xx: Remove binary cpld bitstream from DP405 board
+
+ This patch removes the cpld binary bitstream that is
+ used by esd's cpld command on DP405 boards.
+
+ Because u-boot with an external cpld bitstream may not
+ take more space in flash than before the u-boot binary is
+ shrinked a little bit. Some unused featues have been
+ removed therefore.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 700d553fd3afe804086de8f73d95153315eb0c32
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Apr 29 09:50:59 2009 +0200
+
+ 4xx: Remove binary cpld bitstream from VOM405 board
+
+ This patch removes the cpld binary bitstream that is
+ used by esd's cpld command on VOM405 boards.
+
+ Because u-boot with an external cpld bitstream may not
+ take more space in flash than before the u-boot binary is
+ shrinked a little bit.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0bb10630364c48d9857cbf5353da609fc4dd6751
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Apr 29 09:50:58 2009 +0200
+
+ 4xx: Remove binary cpld bitstream from PMC405 board
+
+ This patch removes the cpld binary bitstream that is
+ used by esd's cpld command on PMC405 boards.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7cc635fb35f5b94e304fa2243d56758f57f6416b
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Apr 29 09:50:57 2009 +0200
+
+ 4xx: Remove binary cpld bitstream from CMS700 board
+
+ This patch removes the cpld binary bitstream that is
+ used by esd's cpld command on CMS700 boards.
+
+ Because u-boot with an external cpld bitstream may not
+ take more space in flash than before the u-boot binary is
+ shrinked a little bit. Some unused featues have been
+ removed therefore.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c1b2f79788deec75773b1d944d8aaf4a6d5baf9e
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Apr 29 09:50:56 2009 +0200
+
+ esd/common: extend cpld command with address parameter
+
+ This patch adds support for an address parameter to esd's
+ cpld command. This is in preparation to remove compiled-in
+ binary cpld (xsvf) bitstreams.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9166b776350d16460c7330bfb0a50154ea0a1903
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sat Apr 18 22:34:06 2009 -0500
+
+ cmd_i2c: Fix i2c help command output when CONFIG_I2C_MUX
+
+ When CONFIG_I2C_MUX was defined the output of 'help i2c' was not
+ correct, eg:
+
+ => help i2c
+ i2c bus [muxtype:muxaddr:muxchannel] - add a new bus reached over muxes.
+ speed [speed] - show or set I2C bus speed
+ i2c dev [dev] - show or set current I2C bus
+ ...
+
+ It has been changed to:
+ i2c speed [speed] - show or set I2C bus speed
+ i2c bus [muxtype:muxaddr:muxchannel] - add a new bus reached over muxes
+ i2c dev [dev] - show or set current I2C bus
+ ...
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 0a45a6357b02e5ce5bf899a60db09def6a129fee
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sat Apr 18 22:34:05 2009 -0500
+
+ cmd_i2c: Clean up trivial helper functions
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit e96ad5d3aba42f8ffe99f7cc5ec1bb9f21810035
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sat Apr 18 22:34:04 2009 -0500
+
+ cmd_i2c: Clean up i2c command argument parsing
+
+ argc and argv should only be modified once instead of once for
+ every i2c sub-command
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 0f89c54be92773b23d66ac401ba6acb6144100c3
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sat Apr 18 22:34:03 2009 -0500
+
+ i2c: Update references to individual i2c commands
+
+ The individual i2c commands imd, imm, inm, imw, icrc32, iprobe, iloop,
+ and isdram are no longer available so all references to them have been
+ updated to the new form of "i2c <cmd>".
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit d48eb5131d287f52bb85b4c58c8680a2e8e3b641
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sat Apr 18 22:34:02 2009 -0500
+
+ i2c: Remove deprecated individual i2c commands
+
+ The following individual I2C commands have been removed: imd, imm, inm,
+ imw, icrc32, iprobe, iloop, isdram.
+
+ The functionality of the individual commands is still available via
+ the 'i2c' command.
+
+ This change only has an impact on those boards which did not have
+ CONFIG_I2C_CMD_TREE defined.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 655b34a78adf60ef260981688837904208883ae9
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sat Apr 18 22:34:01 2009 -0500
+
+ i2c: Create common default i2c_[set|get]_bus_speed() functions
+
+ New default, weak i2c_get_bus_speed() and i2c_set_bus_speed() functions
+ replace a number of architecture-specific implementations.
+
+ Also, providing default functions will allow all boards to enable
+ CONFIG_I2C_CMD_TREE. This was previously not possible since the
+ tree-form of the i2c command provides the ability to display and modify
+ the i2c bus speed which requires i2c_[set|get]_bus_speed() to be
+ present.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 8229e9c04f7019ddd76aea05d4dca044cbc9a34a
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Sat Apr 18 22:34:00 2009 -0500
+
+ cm5200: Make function test command names more unique
+
+ Add "_test" to cm5200's function test command names to prevent
+ overlap with common, global function names. Originally, the
+ "do_i2c" function test command interfered with
+ common/cmd_i2c.c's "do_i2c" when CONFIG_I2C_CMD_TREE was defined.
+
+ The functions were also made static as they are not globally accessed.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit f0722ee762e8dada9d7f74ac2745e043f83aae85
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Apr 24 15:34:09 2009 -0500
+
+ tsi108_i2c: Add i2c_init() stub function
+
+ Add the i2c_init() function so that the tsi108_i2c.c driver fits
+ U-Boot's standard I2C API which is utilized by cmd_i2c.c
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 8d907e79bc9babb27396e34be54cfdc36ff62fb9
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Apr 24 15:34:08 2009 -0500
+
+ mpc7448hpc2: Add CONFIG_SYS_I2C_SPEED define
+
+ Add standard CONFIG_SYS_I2C_SPEED define for the mpc7448hpc2 so that
+ it can use the common 'i2c speed' command. Note that the I2C controller
+ utilized by the mpc7448hpc2 has a fixed speed and cannot be changed
+ dynamically.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit a056b1ce9e19b4d4ab3dd01c3f897dcd832cd37f
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Apr 24 15:34:07 2009 -0500
+
+ Marvell: i2c cleanup
+
+ The following changes were made, primarily to bring the Marvell i2c
+ driver in line with U-Boot's current I2C API:
+ - Made i2c_init() globally accessible
+ - Made i2c_read() and i2c_write() return an integer
+ - Updated i2c_init() calls to pass in CONFIG_SYS_I2C_SLAVE in the
+ offhand chance someone adds slave support in the future
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 54afc6ee10c8cd09598d814d49e601359b005e49
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Apr 24 15:34:06 2009 -0500
+
+ cpci750: i2c cleanup
+
+ The following changes were made, primarily to bring the cpci750 i2c
+ driver in line with U-Boot's current I2C API:
+ - Made i2c_init() globally accessible
+ - Made i2c_read() and i2c_write() return an integer
+ - Updated i2c_init() calls to pass in CONFIG_SYS_I2C_SLAVE in the
+ offhand chance someone adds slave support in the future
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 9c90a2c8e87414007a016b7cd099ac1e32fd301b
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Apr 24 15:34:05 2009 -0500
+
+ i2c.h: Provide a default CONFIG_SYS_I2C_SLAVE value
+
+ Many boards/controllers/drivers don't support an I2C slave interface,
+ however CONFIG_SYS_I2C_SLAVE is used in common code so provide a
+ default
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit e7563aff174f77aa61dab1ef5d9b47bebaa43702
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jun 11 23:42:35 2009 -0500
+
+ fsl-ddr: Fix handling of >4G of memory when !CONFIG_PHYS_64BIT
+
+ The ddr code computes most things as 64-bit quantities and had some places
+ in the middle that it was using phy_addr_t and phys_size_t.
+
+ Instead we use unsigned long long through out and only at the last stage of
+ setting the LAWs and reporting the amount of memory to the board code do we
+ truncate down to what we can cover via phys_size_t.
+
+ This has the added benefit that the DDR controller itself is always setup
+ the same way regardless of how much memory we have. Its only the LAW
+ setup that limits what is visible to the system.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d4b130dc80761b430dc5b410159cd158fca1a348
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jun 11 23:40:34 2009 -0500
+
+ 85xx: Use print_size to report amount of memory not mapped by TLBs
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6e2aebc33fa740c068fe28d40eaf0319b7c7287e
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed May 20 12:30:42 2009 -0400
+
+ 85xx: Add README for MPC8569MDS
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit b2aab386e957ba684d4f2a466bfaa91770e5058a
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed May 20 12:30:33 2009 -0400
+
+ 85xx: Add UART1 support for MPC8569MDS
+
+ MPC8569 UART1 signals are muxed with PortF bit[9-12], we need to define
+ those pins before using UART1.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 399b53cbab0b377ac4c5c16c19c6e41b68a9c719
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed May 20 12:30:32 2009 -0400
+
+ 85xx: Add PIB support at CS4/CS5 for MPC8569MDS
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Yu Liu <Yu.Liu@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit fb27949059f1bc84381a6216a819090f0cdbaa70
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Thu Jun 4 16:12:39 2009 -0400
+
+ 85xx: Fix some settings for MPC8569MDS board
+
+ - Increase the size of malloc to 512KB because MPC8569MDS needs more memory for
+ malloc to support up to eight Ethernet interfaces.
+ - Move Environment address out of uboot thus the saved environment variables
+ will not be erased after u-boot is re-programmed.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c7f60fd29f2d638d080cdf1a49ad985b85f9429d
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed May 20 12:30:30 2009 -0400
+
+ 85xx: Fix MURAM size for MPC8569
+
+ MPC8569 has 128K bytes MURAM.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a53c997dd7fc858f2a27f5a47b200567b9343ae5
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 22 20:23:51 2009 +0200
+
+ at91/cpu.c: add missing Copyright & GPL header
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit aa446a591aca46ef2b53cc6598ea8091feb45444
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sun Jun 7 21:45:16 2009 +0900
+
+ apollon: Fix a OBJCFLAGS typo
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
+
+commit 580611cb0932143fc2d7a735cfa9ce1ef34d6002
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jun 10 00:19:28 2009 +0200
+
+ Prepare 2009.06-rc3
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3a76ab5c166d5956885f803ce975e7151cc0ca0e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jun 10 00:15:11 2009 +0200
+
+ rmu board: fix error: 'CONFIG_ENV_SECT_SIZE' undeclared
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 165f9859b64ff59f0cfae3cc70a7e7ded7aaa4a7
+Author: Daniel Mack <daniel@caiaq.de>
+Date: Thu Jun 4 19:44:12 2009 +0200
+
+ ubifs: fix small error path mismatch
+
+ In do_readpage(), don't free 'dn' if its allocation failed.
+
+ Signed-off-by: Daniel Mack <daniel@caiaq.de>
+
+commit de7cf709ebd3c01fbd094e8853dabb410c0370a1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jun 4 00:31:07 2009 +0200
+
+ EP88x: fix broken linker script
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Tested-by: Mikhail Zaturenskiy <mzaturenskiy@shoppertrak.com>
+
+commit 7a2063bd80d3b58b2dd5d5e58f4411f8d250576c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 15 00:16:02 2009 +0200
+
+ TQM85xx: minor config file cleanup
+
+ Remove "saveenv" from "update" definition: the environment is outside
+ the U-Boot image on TQM85xx and therefor not affected by updates.
+
+ Also "beautify" code a bit (vertical alignment).
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c0296b1801fc9426d772fa75fe58458db605dfee
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 15 00:16:01 2009 +0200
+
+ TQM85xx: adapt for new flash types
+
+ Old TQM85xx boards had 'M' type Spansion Flashes from the S29GLxxxM
+ series while new boards have 'N' type Flashes from the S29GLxxxN
+ series, which have bigger sectors: 2 x 128 instead of 2 x 64 KB.
+
+ We now change the configuration to the new flash types for all
+ boards; this also works on old boards - we just waste two flash
+ sectors for the environment which could be smaller there.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6735104924f06340071a6914a9ee3345607fc102
+Author: Dave Liu <daveliu@freescale.com>
+Date: Mon May 18 17:49:23 2009 +0800
+
+ 85xx: Fix the wrong SYS_CLK_IN for 8569MDS
+
+ The SYS_CLK_IN of MPC8569MDS is 66.66MHz,
+ The DDR_CLK_IN is same with SYS_CLK_IN in 8569 processor.
+ so, change the SYS_CLK_IN from 66MHz to 66.66MHz.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 16e7559c08b6f29db4596d795b92914c01e6a1b3
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri May 15 10:27:44 2009 +0800
+
+ 85xx: Fix the wrong BCSR address of 8569MDS
+
+ The BCSR17[7] = 1 will unlock the write protect of FLASH.
+ The WP# pin only controls the write protect of top/bottom sector,
+ That is why we can save env, but we can't write the first sector
+ before the patch.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 90d13b8ac3d515349626d7c8a3dc34ef38c43fa6
+Author: Fredrik Arnerup <fredrik.arnerup@edgeware.tv>
+Date: Tue Jun 2 16:27:10 2009 -0500
+
+ 85xx: bugfix for reading maximum TLB size on mpc85xx
+
+ The MAXSIZE field in the TLB1CFG register is 4 bits, not 8 bits.
+ This made setup_ddr_tlbs() try to set up a TLB larger than the e500 maximum
+ (256 MB)
+ which made u-boot hang in board_init_f() when trying to create a new stack
+ in RAM.
+ I have an mpc8540 with one 1GB dimm.
+
+ Signed-off-by: Fredrik Arnerup <fredrik.arnerup@edgeware.tv>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 1b5291dddf5f16c7ae10e3cb165882fa96038b26
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Mar 27 14:32:43 2009 +0800
+
+ 85xx: Fix the clock adjust of mpc8569mds board
+
+ Currently the clk_adj is 6 (3/4 cycle), The settings will cause
+ the DDR controller hang at the data init. Change the clk_adj
+ from 6 to 4 (1/2 cycle), make the memory system stable.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit faa14babd7466dfade358f9cac128ae246b9bf1b
+Author: RONETIX - Ilko Iliev <iliev@ronetix.at>
+Date: Fri Jun 5 16:54:31 2009 +0200
+
+ at91: fix a USB problem for AT91SAM9261
+
+ This patch corrects the missing PLLB initialization in usb_cpu_init()
+ for AT91SAM9261.
+ Because of the missing PLLB initialization, the USB support for all
+ AT91SAM9261 based boards will work only if the PLLB is configured by a
+ precedent bootloader.
+
+ Signed-off-by: Ilko Iliev <iliev@ronetix.at>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 0c24dec550ddb7d86b8bfdd8645b18479f73e6e2
+Author: Felix Radensky <felix@embedded-sol.com>
+Date: Sun May 31 20:44:15 2009 +0300
+
+ ppc4xx/net: Fix MDIO clock setup
+
+ This patch fixes MDIO clock setup in case when OPB frequency is 100MHz.
+ Current code assumes that the value of sysinfo.freqOPB is 100000000
+ when OPB frequency is 100MHz. In reality it is 100000001. As a result
+ MDIO clock is set to incorrect value, larger than 2.5MHz, thus violating
+ the standard. This in not a problem on boards equipped with Marvell PHYs
+ (e.g. Canyonlands), since those PHYs support MDIO clocks up to 8.3MHz,
+ but can be a problem for other PHYs (e.g. Realtek ones).
+
+ Signed-off-by: Felix Radensky <felix@embedded-sol.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d65e34d12514de2bbe3b8f519761d641c081bad0
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Wed Feb 25 14:27:29 2009 +0900
+
+ rtl8169: fix PCI system memory address
+
+ When PCI device use system memory, some PCI host controller should be
+ set physical memory address.
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit ca9c8a1e10fac01e6a1129f82a7ce18bd818fa43
+Author: Manikandan Pillai <mani.pillai@ti.com>
+Date: Wed Apr 8 09:14:35 2009 +0530
+
+ SMC911x driver fixed for NFS boot
+
+ eth_halt() function in the smc911x drivers used to call the
+ smc911x_reset() function. eth_halt() used to be called after
+ tftp transfers. This used to put the ethernet chip in reset
+ while the linux boots up resulting in the ethernet driver
+ not coming up. NFS boot used to fail as a result.
+
+ This patch calls smc911x_shutdown() instead of smc911x_reset().
+ Some comments received has also been fixed.
+
+ Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit e5a3bc2401a23f1890611f020f57f94824a534db
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Sun May 3 12:11:40 2009 +0200
+
+ Add config option for disabling DM9000-SROM support.
+
+ Some boards do not have SROM support for the DM9000 network adapter.
+ Instead of listing these board names in the driver code, make this
+ option configurable from the board config file.
+
+ It also removes a build warning for the at91sam9261ek board:
+ 'dm9000x.c:545: warning: 'read_srom_word' defined but not used'
+
+ And it repaires the trizepsiv board build which was broken around the
+ same routines
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3c9b1ee17e19bd6d80344678d41a85e52b0be713
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Jun 5 14:11:33 2009 -0500
+
+ mpc83xx: don't set SICRH_TSOBI1 to RMII/RTBI operation
+
+ In GMII mode (which operates at 3.3V) both SICRH TSEC1/2 output buffer
+ impedance bits should be clear, i.e., SICRH[TSIOB1] = 0 and SICRH[TSIOB2] = 0.
+ SICRH[TSIOB1] was erroneously being set high.
+
+ U-Boot always operated this PHY interface in GMII mode. It is assumed this
+ was missed in the clean up by the original board porters, and copied along
+ to the TQM and sbc boards.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+ Acked-by: Ira Snyder <iws@ovro.caltech.edu>
+ Reviewed-by: David Hawkins <dwh@ovro.caltech.edu>
+ Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ CC: Dave Liu <DaveLiu@freescale.com>
+
+commit 2c0234fa79122a5aa77c4e17c33eb2fe184b61a7
+Author: Daniel Mack <daniel@caiaq.de>
+Date: Wed Apr 8 13:23:37 2009 +0200
+
+ smc911x: write back the manually set MAC address
+
+ If the MAX address is given by the environment, write it back to the
+ hardware.
+
+ Signed-off-by: Daniel Mack <daniel@caiaq.de>
+ Cc: Sascha Hauer <s.hauer@pengutronix.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit dfcd7f21607fd847236b04bb1a8d59a7c10ab99c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 15 00:16:03 2009 +0200
+
+ Redundant Environment: protect full sector size
+
+ Several boards used different ways to specify the size of the
+ protected area when enabling flash write protection for the sectors
+ holding the environment variables: some used CONFIG_ENV_SIZE and
+ CONFIG_ENV_SIZE_REDUND, some used CONFIG_ENV_SECT_SIZE, and some even
+ a mix of both for the "normal" and the "redundant" areas.
+
+ Normally, this makes no difference at all. However, things are
+ different when you have to deal with boards that can come with
+ different types of flash chips, which may have different sector
+ sizes.
+
+ Here we may have to chose CONFIG_ENV_SECT_SIZE such that it fits the
+ biggest sector size, which may include several sectors on boards using
+ the smaller sector flash types. In such a case, using CONFIG_ENV_SIZE
+ or CONFIG_ENV_SIZE_REDUND to enable the protection may lead to the
+ case that only the first of these sectors get protected, while the
+ following ones aren't.
+
+ This is no real problem, but it can be confusing for the user -
+ especially on boards that use CONFIG_ENV_SECT_SIZE to protect the
+ "normal" areas, while using CONFIG_ENV_SIZE_REDUND for the
+ "redundant" area.
+
+ To avoid such inconsistencies, I changed all sucn boards that I found
+ to consistently use CONFIG_ENV_SECT_SIZE for protection. This should
+ not cause any functional changes to the code.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Paul Ruhland
+ Cc: Pantelis Antoniou <panto@intracom.gr>
+ Cc: Stefan Roese <sr@denx.de>
+ Cc: Gary Jennejohn <garyj@denx.de>
+ Cc: Dave Ellis <DGE@sixnetio.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit b81830f6e3b3e6ed114d071eb107965e49fa9b5a
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Thu May 14 14:03:09 2009 +0400
+
+ mmc: it's safe to ignore mmc_send_if_cond() return value
+
+ Return value of mmc_send_if_cond() can be safely ignored (as it is
+ done in Linux). This makes older cards work with MXC MCI controller.
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit dba6fcf6517faa5dda7df8109febe03c9c72a6f5
+Author: Stefan Roese <sr@denx.de>
+Date: Mon May 11 15:54:13 2009 +0200
+
+ cfi_mtd: Fix bug in last sector detection
+
+ This patch now enabled this cfi-mtd wrapper to correctly detect and
+ erase the last sector in an NOR FLASH device.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4e3d89ba948eef801ffd46ef862cdede5b3f8320
+Author: Yauhen Kharuzhy <jekhor@gmail.com>
+Date: Thu May 7 00:43:30 2009 +0300
+
+ mmc: Fix decoding of SCR & function switch data on little-endian machines
+
+ SCR & switch data are read from card as big-endian words and should be
+ converted to CPU byte order.
+
+ Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit f33cb34b3971dabe3720d577b0e1b8601c09fe17
+Author: Yauhen Kharuzhy <jekhor@gmail.com>
+Date: Thu May 7 13:08:53 2009 +0300
+
+ mmc: Remove return from mmc_init for non SD 2.0 compatible cards.
+
+ Cards which are not compatible with SD 2.0 standard, may return response
+ for CMD8 command, but it will be invalid in terms of SD 2.0. We should
+ accept this case as admissible, just like Linux does.
+
+ Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 998be3dd59ed0af4bec38324047fecfa88ac45db
+Author: Rabin Vincent <rabin@rab.in>
+Date: Sun Apr 5 13:30:56 2009 +0530
+
+ mmc: drop unnecessary casts
+
+ Now that response is a uint, we can drop all the casts.
+
+ Signed-off-by: Rabin Vincent <rabin@rab.in>
+
+commit 0b453ffe28bb9227d86ddbe0893bd19c93f04ed7
+Author: Rabin Vincent <rabin@rab.in>
+Date: Sun Apr 5 13:30:55 2009 +0530
+
+ mmc: fix response decoding on little endian
+
+ The mmc code defines the response as an array of chars. However, it
+ access the response bytes both as (i) an array of four uints (with
+ casts) and (ii) as individual chars. The former case is used more
+ often, including by the driver when it assigns the response.
+
+ The char-wise accesses are broken on little endian systems because they
+ assume that the bytes in the uints are in big endian byte order.
+
+ This patch fixes this by changing the response to be an array of four
+ uints and replacing the char-wise accesses with equivalent uint-wise
+ accesses.
+
+ Signed-off-by: Rabin Vincent <rabin@rab.in>
+
+commit 9b1f942c09dd942e6de3185caa81c111b14de567
+Author: Rabin Vincent <rabin@rab.in>
+Date: Sun Apr 5 13:30:54 2009 +0530
+
+ mmc: use lldiv to fix arm eabi build
+
+ The generic MMC core uses direct long long divisions, which do not build
+ with ARM EABI toolchains. Use lldiv() instead, which works everywhere.
+
+ Signed-off-by: Rabin Vincent <rabin@rab.in>
+
+commit e85649c7e683faea1ccfddc9fa9abc62f38e4201
+Author: Rabin Vincent <rabin@rab.in>
+Date: Sun Apr 5 13:30:53 2009 +0530
+
+ mmc: check find_mmc_device return value
+
+ find_mmc_device returns NULL if an invalid device number is specified.
+ Check for this to avoid dereferencing NULL pointers.
+
+ Signed-off-by: Rabin Vincent <rabin@rab.in>
+
+commit ac0865ff33870cdf2cd480165045e1bc311e9fa2
+Author: Rabin Vincent <rabin@rab.in>
+Date: Sun Apr 5 13:30:52 2009 +0530
+
+ mmc: clean up help texts
+
+ Remove some repeated words and superfluous newlines in the mmc command
+ help entries.
+
+ Signed-off-by: Rabin Vincent <rabin@rab.in>
+
+commit 7d6900ebe16d679c0e03f8d1584b64057a64ce39
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri May 29 17:01:48 2009 -0400
+
+ Blackfin: spi: fix pin handling of SPI0 SSEL4
+
+ CS4 on SPI0 has a dedicated PH8 pin which needs to be enabled as a
+ peripheral in order to work.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2157359dad2533987f5eb0181ef543693fad6a33
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue May 26 02:51:57 2009 -0400
+
+ Blackfin: fix if() logic in bootrom evt1 check
+
+ A missing set of parenthesis caused the silicon revision to apply only to
+ the BF533 and not the BF531/BF532 variants.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 76b5883da2cf049cd410901c04ea450e5f5c27c3
+Author: Stefan Roese <sr@denx.de>
+Date: Sat May 16 12:04:22 2009 +0200
+
+ jffs2/mtdparts: Fix problem with usage from JFFS2 and MTDPARTS together
+
+ Currently using JFFS2 with MTDPARTS enabled doesn't work. This is because
+ mtdparts_init() is available in both files, cmd_mtdparts.c and
+ cmd_jffs2.c. Please note that in the original cmd_jffs2.c file (before
+ the jffs2/mtdparts command/file split those 2 different versions
+ already existed. So this is nothing new. The main problem is that the
+ variables "current_dev" and "current_partnum" are declared in both
+ files now. This doesn't work.
+
+ This patch now changes the names of those variable to more specific
+ names: "current_mtd_dev" and "current_mtd_partnum". This is because
+ this patch also changes the declaration from static to global, so
+ that they can be used from both files.
+
+ Please note that my first tests were not successful. The MTD devices
+ selected via mtdparts are now accessed but I'm failing to see the
+ directory listed via the "ls" command. Nothing is displayed. Perhaps
+ I didn't generate the JFFS2 image correctly (I never used JFFS2 in
+ U-Boot before). Not sure. Perhaps somebody else could take a look at
+ this as well. I'll continue looking into this on Monday.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Wolfgang Denk <wd@denx.de>
+ Cc: Detlev Zundel <dzu@denx.de>
+ Cc: Ilya Yanok <yanok@emcraft.com>
+ Cc: Renaud barbier <renaud.barbier@ge.com>
+
+commit ab687907980fa28940a1a992d3f1c5d17cdbbf5d
+Author: Graf Yang <graf.yang@analog.com>
+Date: Sun May 24 02:34:34 2009 -0400
+
+ Blackfin: bf518f-ezbrd: setup portmux for async flash
+
+ The pins for async memory where parallel flash lives are not enabled by
+ default, so make sure we mux them as needed.
+
+ Signed-off-by: Graf Yang <graf.yang@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit f40f6db278f602b55820693634a7256b0b4e4b80
+Author: Stefan Roese <sr@denx.de>
+Date: Wed May 20 10:58:03 2009 +0200
+
+ nand: Fix problem with ECC ordering for PPC4xx NDFC platforms
+
+ This patch enables Smart Media (SMC) ECC byte ordering which is used
+ on the PPC4xx NAND FLASH controller (NDFC). Without this patch we have
+ incompatible ECC byte ordering to the Linux kernel NDFC driver.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Acked-by: Scott Wood <scottwood@freescale.com>
+
+commit 399aab7748bef053d59612211e1bd7a3fabfce18
+Author: Stefan Roese <sr@denx.de>
+Date: Wed May 20 10:58:02 2009 +0200
+
+ ppc4xx: Fix problem with ECC ordering for PPC4xx NDFC platforms
+
+ This patch now uses the correct ECC byte order (Smart Media - SMC)
+ to be used on the 4xx NAND FLASH driver. Without this patch we have
+ incompatible ECC byte ordering to the Linux kernel NDFC driver.
+
+ Please note that we also have to enable CONFIG_MTD_NAND_ECC_SMC in
+ drivers/mtd/nand/nand_ecc.c for correct operation. This is done with
+ a seperate patch.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Acked-by: Scott Wood <scottwood@freescale.com>
+
+commit 5d841fac8249a2b3f9a814da2140132be0a9f60d
+Author: Stefan Roese <sr@denx.de>
+Date: Wed May 20 10:58:01 2009 +0200
+
+ ppc4xx: Move definition for PPC4xx NAND FLASH controller to header
+
+ This patch moves the definition for the PPC4xx NAND FLASH controller
+ (NDFC) CONFIG_NAND_NDFC into include/ppc4xx.h. This is needed for the
+ upcoming fix for the ECC byte ordering of the NDFC driver.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Acked-by: Scott Wood <scottwood@freescale.com>
+
+commit 2df72b82bc9e17b88dc82735a067749220beb025
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue May 19 12:53:36 2009 -0500
+
+ common: fix inline--weak error spotted by gcc 4.4
+
+ cmd_ide.c:547: error: inline function 'ide_inb' cannot be declared weak
+
+ removing the inline attribute fixes it.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 9fd9abedcc3c10cf89353265cbe05f58609d51f3
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue May 19 12:53:32 2009 -0500
+
+ TQM834x: remove defines causing gcc4.4 warnings
+
+ Configuring for TQM834x board...
+ cpu_init.c: In function 'cpu_init_f':
+ cpu_init.c:262: warning: array subscript is above array bounds
+ cpu_init.c:263: warning: array subscript is above array bounds
+ cpu_init.c:270: warning: array subscript is above array bounds
+ ...
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 0850301747228a3327f2815a85284d26ade3de95
+Author: Andreas Huber <andreas.huber@keymile.com>
+Date: Tue May 19 11:06:30 2009 +0200
+
+ UBI: fix return code in ubi_volume_read
+
+ Return -ENODEV instead of 0 when trying to read from a non existing volume.
+
+ Signed-off-by: Andreas Huber <andreas.huber@keymile.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ec01481ddc4cf302c7f6d760b776ca94819ec21e
+Author: Graf Yang <graf.yang@analog.com>
+Date: Tue May 19 04:40:08 2009 -0400
+
+ Blackfin: fix timer_init()/timer_reset()
+
+ The timer_init() function was not using the right csync instruction, nor
+ was it doing it right after disabling the core timer.
+
+ The timer_reset() function would reset the timestamp, but not the actual
+ timer, so there was a common edge case where get_timer() return a jump of
+ one timestamp (couple milliseconds) right after resetting. This caused
+ many functions to improperly timeout right away.
+
+ Signed-off-by: Graf Yang <graf.yang@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c06326c73bf90e48a8e1cf8893ad31c575423f50
+Author: Shinya Kuribayashi <skuribay@pobox.com>
+Date: Sat May 16 09:12:09 2009 +0900
+
+ MIPS: lib_mips/board.c: Remove unused variables
+
+ This fixes the following build warnings:
+
+ board.c: In function 'board_init_r':
+ board.c:328: warning: unused variable 'i'
+ board.c:326: warning: unused variable 'e'
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
+
+commit 47f6a36cc3f3427cc8e4f1d0f3e6678be6f33769
+Author: Shinya Kuribayashi <skuribay@pobox.com>
+Date: Sat May 16 09:12:09 2009 +0900
+
+ MIPS: Make all extern-ed functions in bitops.h static
+
+ All these functions are expected to be static inline-ed.
+ This patch also fixes the following build warnings on MIPS targets:
+
+ include/asm/bitops.h: In function 'ext2_find_next_zero_bit':
+ include/asm/bitops.h:862: warning: '__fswab32' is static but used in inline function 'ext2_find_next_zero_bit' which is not static
+ include/asm/bitops.h:885: warning: '__fswab32' is static but used in inline function 'ext2_find_next_zero_bit' which is not static
+ include/asm/bitops.h:887: warning: '__fswab32' is static but used in inline function 'ext2_find_next_zero_bit' which is not static
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
+
+commit 87423d740b91329b8d1d0b73cafd6930993b558a
+Author: Thomas Lange <thomas@corelatus.se>
+Date: Fri Apr 24 16:22:16 2009 +0200
+
+ MIPS: Implement ethernet halt for au1x00
+
+ Implement ethernet halt() by putting MAC0 in reset.
+ If we do not do this, we will get memory corruption
+ when ethernet frames are received during early OS boot.
+
+ Signed-off-by: Thomas Lange <thomas@corelatus.se>
+ Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
+
+commit a2e0ffcf2d9a22c582a93e84a4bef20fd3877f47
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 15 23:29:23 2009 +0200
+
+ Prepare v2009.06-rc2
+
+ Update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f4317ea91942f44cc1c433277927b61618e9b0a5
+Author: Daniel Mack <daniel@caiaq.de>
+Date: Tue May 5 12:48:29 2009 +0200
+
+ ARM: fix PXA build by defining UP2OCR
+
+ U-Boot does not currently build for PXA platforms with USB support
+ enabled:
+
+ usb.c:46: error: 'UP2OCR' undeclared (first use in this function)
+
+ Signed-off-by: Daniel Mack <daniel@caiaq.de>
+ Cc: Markus Klotzbuecher <mk@denx.de>
+
+ Edited commit message.
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e26ad0eabd10a8cda51920fbcfe4da5b4ccf0c98
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 15 22:32:57 2009 +0200
+
+ Minor Coding Style fix; update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit af75a45d23b72a59ac5cc0427696c7f634fdc94b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 15 09:27:58 2009 +0200
+
+ IDE: bail out of dev_print() for unknown device types
+
+ Commit 574b319512 introduced a subtle bug by mixing a list of tests
+ for "dev_desc->type" and "dev_desc->if_type" into one switch(), which
+ then mostly did not work because "dev_desc->type" cannot take any
+ "IF_*" type values. A later fix in commit 8ec6e332ea changed the
+ switch() into testing "dev_desc->if_type", but at this point the
+ initial test for unknown device types was completely lost, which
+ resulted in output like that for IDE ports without device attached:
+
+ Device 1: Model: Firm: Ser#:
+ Type: # 1F #
+ Capacity: not available
+
+ This patch re-introduces the missing test for unknown device types.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Stefan Roese <sr@denx.de>
+ Cc: Detlev Zundel <dzu@denx.de>
+ Tested-by: Stefan Roese <sr@denx.de>
+
+commit c21f62d8483fbab44cd98d93ff2e9355a330d225
+Author: Stefan Roese <sr@denx.de>
+Date: Thu May 14 07:25:13 2009 +0200
+
+ 74xx_7xx: Fix rounding problem in CPU frequency calculation
+
+ This patch fixes a problem in the CPU frequency calculation. Without it
+ a 798MHz CPU is displayed as 368.503 MHz. And with it it's 798 MHz.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3ad8a0517b724782ab36f2b554a94de4c00c1adb
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed May 13 22:24:12 2009 +0200
+
+ console.h: remove unused prototype 'console_realloc'
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 84bf7ca522e94ec402a1264b01971b924b7e268f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed May 13 22:16:31 2009 +0200
+
+ api: remove un-needed ifdef CONFIG_API already handle by the Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 792a09eb9d5d8c4f74b7e9f2e887316d511a4e80
+Author: Detlev Zundel <dzu@denx.de>
+Date: Wed May 13 10:54:10 2009 +0200
+
+ Fix e-mail address of Gary Jennejohn.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 5e2c08c3ac90808e9be64856916bfd6df984823c
+Author: Emil Medve <Emilian.Medve@Freescale.com>
+Date: Tue May 12 13:48:32 2009 -0500
+
+ Remove inline qualifier from show_boot_progress()
+
+ The 'inline' is conflicting with the semantic of 'weak' attribute and with the
+ way the show_boot_progress() function is used.
+
+ Also gcc 4.4 is complaining about it:
+
+ main.c:51: error: inline function 'show_boot_progress' cannot be declared weak
+
+ Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
+
+commit fe6da4837308aa33d537ac3e7f36c2d66e3d9a36
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue May 12 15:17:35 2009 +0200
+
+ MPC8260: fixup device tree by property instead of path
+
+ cpu/mpc8260/cpu.c used to use do_fixup_by_path_u32() to update the
+ clock frequencies in the device tree, using a CPU path
+ "/cpus/OF_CPU", with OF_CPU beind defined in the board config file.
+
+ However, this does not work when one board config file (here:
+ MPC8260ADS.h) is intended to be used for several diffrent CPUs and
+ therefor contains a generic definition like "cpu@0", as the device
+ trees that will then be loaded will contain specific names like
+ "PowerPC,8272@0".
+
+ We switch to using do_fixup_by_prop_u32() instead, so we can search
+ for device_type="cpu", as it is done in other architectures, too.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Heiko Schocher <hs@denx.de>
+ Acked-by: Heiko Schocher <hs@denx.de>
+ Tested-by: Heiko Schocher <hs@denx.de>
+
+commit 12a6753155716e5c3c181a8f40e8b2d3d669aefd
+Author: Rohit Hagargundgi <h.rohit@samsung.com>
+Date: Mon Mar 9 19:45:46 2009 +0530
+
+ Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN
+
+ Add CONFIG_SYS_MONITOR_LEN macro to apollon board config.
+ CONFIG_SYS_MONITOR_LEN defines the U-Boot image size.
+ and is used by OneNAND ipl when reading U-Boot image.
+
+ Signed-off-by: Rohit Hagargundgi <h.rohit at samsung.com>
+ Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit c404cc5884b0c82fd82d751dbd8e8b3f8919a23a
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Tue Apr 28 17:04:51 2009 -0700
+
+ Schedule removal of non-CONFIG_NET_MULTI net driver API
+
+ This will make CONFIG_NET_MULTI the only net driver configuration and
+ we'll be able to remove this option.
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 60bbcf0cc6e55095dd186e59a557d584b9b56eb1
+Author: Detlev Zundel <dzu@denx.de>
+Date: Tue May 5 16:04:06 2009 +0200
+
+ powerpc/inka4x0: Remove left-over ide reset code.
+
+ The pin which was used in preliminary versions of the board for ide
+ reset is really connected to the rtc clock.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit f578a2da6770951239ad91ee9a1875fdc71dbe48
+Author: Marco Stornelli <marco.stornelli@gmail.com>
+Date: Tue Apr 28 19:04:02 2009 +0200
+
+ Add imls utility command
+
+ This patch adds, under tools folder, a new command called imls. Its
+ goal is the same of UBoot's imls but it can be used as Linux shell
+ command. It reads from raw mtd partition and prints the list of the
+ stored images.
+
+ Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
+
+commit da95427ce431908714ae5e9f663ee6e2bc3bcc33
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Apr 28 08:36:11 2009 +0200
+
+ netloop: updates for NetLoop
+
+ Fix some issues introduced from commit:
+ 2f70c49e5b9813635ad73666aa30f304c7fdeda9
+ suggested by Mike Frysinger.
+
+ - added some comment for the env_id variable in common_cmd_nvedit.c
+ - moved some variables in fn scope instead of file scope
+ - NetInitLoop now static void
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3c1d89545de11822f8b5afb5646a57757620bd95
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Apr 28 07:48:39 2009 +0200
+
+ 82xx, ids8247: added ids8247 board to MAKEALL script
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 890a017a8a995c921d1e889d360e8d6538ceecfe
+Author: Detlev Zundel <dzu@denx.de>
+Date: Thu May 7 13:08:55 2009 +0200
+
+ arm/imx31_phycore: Fix bi_arch_number
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+ Cc: Sascha Hauer <s.hauer@pengutronix.de>
+
+commit ee47bfabefeb25bdfc83f49ef3bae0f325d3e69e
+Author: Sascha Hauer <s.hauer@pengutronix.de>
+Date: Fri May 15 10:21:33 2009 +0200
+
+ remove myself as phycore/litekit Maintainer
+
+ I never acked a patch that adds me as phycore i.MX31 maintainer nor was
+ it me who pushed the patches, so remove myself from the maintainer list
+ so that other people do not longer wait for my ack.
+
+ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+
+commit c63254ef5628efe1c77cb2fdba20753f9666f55d
+Author: Sergey Lapin <slapin@ossfans.org>
+Date: Tue May 12 12:25:14 2009 +0400
+
+ AFEB9260 network fix
+
+ AFEB9260 uses PA10, PA11 for ETX2 and ETX3.
+ Also, due to extarnal pull-up on IRQ line, Micrel PHY ID is 1 after reset sequence,
+ not 0.
+
+ Signed-off-by: Sergey Lapin <slapin@ossfans.org>
+
+commit f8ddcd58221cab63dd25c2324dd2032487f748b1
+Author: Graf Yang <graf.yang@analog.com>
+Date: Tue May 5 02:26:27 2009 -0400
+
+ Blackfin: bf518f-ezbrd: reset ethernet PHY during init
+
+ We don't know what state the ethernet PHY is in when starting up, so make
+ sure we set it to a sane state. This fixes troubles seen when Linux boots
+ up, configures the PHY is a non-default state, and then the system reboots
+ into U-Boot which previously expected a reset state only.
+
+ Signed-off-by: Graf Yang <graf.yang@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 53310b88eaa27fb5cb83144d0b22389190ad87a1
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue May 5 01:35:41 2009 -0400
+
+ Blackfin: bf527-ezkit: fix SPI flash env params
+
+ The BF527-EZKIT settings for storing the environment in SPI flash wasn't
+ using the correct sector settings for the SPI flash part that is actually
+ on the board.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit f58bf804a14324c6c9186a7a664fa23281780e8b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Apr 24 23:54:19 2009 -0400
+
+ Blackfin: avoid get_sclk() with early serial debug
+
+ When the clock functions were changed to use cached values (and thereby
+ avoiding expensive math functions), early serial debug broke because the
+ baud programming is called before external memory is available.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 02778f2f1b4b1a28b492367477db27c58d45ae35
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Apr 24 23:39:41 2009 -0400
+
+ Blackfin: fix booting with older bootroms (no EVT1)
+
+ When dropping jump block support, the assumption was that all bootroms
+ supported entry point redirection via the EVT1 register. Unfortunately,
+ this turned out to be incorrect for the oldest Blackfin parts (BF533-0.2
+ and older and BF561). No one really noticed earlier because these parts
+ usually are booted by bypassing the bootrom entirely, and older BF533
+ parts are not supported at all (too many anomalies).
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit af2c37378f203857d5e6c957e77a14c2da5b59d2
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Apr 24 23:22:48 2009 -0400
+
+ Blackfin: recurse with early serial initcode
+
+ Make sure we recurse through serial_putc() rather than bang on the UART
+ transmit register directly to avoid hardware overflows when using \n.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 6b8edfde22acc574b5532e9f086e6a7287a9bc78
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 1 21:59:12 2009 +0200
+
+ Prepare v2009.06-rc1
+
+ Update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6b2beb5626a143ca5347e7d2c6005be9936c1fbb
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 1 15:38:06 2009 +0200
+
+ at91: remove lowlevel_init.S
+
+ lowlevel_init.S is not used any more so remove it.
+ As consequence, we also don't have to generate u-boot.lds
+ but can use a static version as before.
+
+ This also fixes the out-of-tree build problem introduced
+ with commit f0a2c7b4 "at91: add support for the PM9263 board"
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0ee7a310479640ef17ce2fc0f6c13cf7961d2330
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 1 00:16:11 2009 +0200
+
+ Update CHANGELOG; minor coding style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d3a513c23ba4100d6983161cdc1f747dfd087bbd
+Author: Manikandan Pillai <mani.pillai@ti.com>
+Date: Tue Apr 21 17:29:05 2009 +0200
+
+ OMAP3: Fix timer handling to 1ms and CONFIG_SYS_HZ to 1000
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+ Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
+
+commit ac9140037a84629c5583066ff1a177396c47d89d
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Fri Apr 17 14:27:56 2009 +0200
+
+ OMAP3: Beagle: Set pinmux conditionally for Rev C boards
+
+ The Beagle Rev C boards pull UART2 from an alternate set of balls.
+
+ Signed-off-by: Steve Sakoman <steve@sakoman.com>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit c1a0fd5f2864e9d381f4a3dc948942cac974e89a
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Mon Apr 27 18:33:33 2009 +0200
+
+ ubifs: BUG: Blocks commpressed with zlib
+
+ Blocks compressed with zlib dont have the full gzip header.
+
+ Without this patch, block compressed with zlib cannot be readed!
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+
+commit 35f6a943f7d92145d607c1d55f5c2e2eae5be630
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Mon Apr 27 18:33:32 2009 +0200
+
+ lib_generic: gunzip: New function zunzip
+
+ Separate gunzip in
+
+ gunzip: Find the end of the header and call zunzip.
+ zunzip: Inflate gunzip block without header.
+
+ UBI fs blocks can be compresed in lzo, zlib or no-compression. The
+ current implementation of u-boot supported all the compressions but
+ there was a bug in the implementation of the zlib blocks.
+
+ UBIFS's Zlib blocks do not have header but they were compressed using
+ gunzip, a function used to decompress gunzip files/sectors with a
+ header.
+
+ This patch adds a new function zunzip that uncompress a zlib block with
+ no header.
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+
+commit a1e5f93185d0d85a4b3fad3b6c743cddcd373b0c
+Author: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
+Date: Thu Apr 23 15:37:16 2009 +0200
+
+ at91: fixed plla calc when no USB support is active
+
+ Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 3791a1187c1401c33c9512595e6e89dbb46230c5
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Wed Apr 22 01:12:04 2009 +0200
+
+ arm925t: Fix CONFIG_SYS_HZ to 1000
+
+ Let CONFIG_SYS_HZ to have value of 1000 effectively fixing all users of
+ get_timer.
+
+ Changes since original version:
+ * Set PTV=2 (divisor 8) for boards using 12MHz timer clock source to
+ improve timer resolution.
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+
+commit 42bf4b2248146abdc592bde0009c6ea42067f437
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Tue Apr 14 20:15:17 2009 +0200
+
+ OMAP3: Remove legacy NAND defines
+
+ Remove remaining legacy NAND defines for Beagle, EVM, Overo and Pandora.
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit cba0b778dd5f1ea32959b6825c7f0a31501a99d5
+Author: Sanjeev Premi <premi@ti.com>
+Date: Mon Apr 27 21:27:54 2009 +0530
+
+ OMAP3: Print correct silicon revision
+
+ The function display_board_info() displays incorrect
+ silicon revision - based on the return value from
+ function get_cpu_rev().
+
+ This patch fixes the problem.
+
+ Signed-off-by: Sanjeev Premi <premi@ti.com>
+
+commit 90006e9b33bcdbf241b0295d186e3634137907a9
+Author: Sanjeev Premi <premi@ti.com>
+Date: Mon Apr 27 21:27:44 2009 +0530
+
+ OMAP3: Remove unused board-types
+
+ The board-types defined in struct omap3_sysinfo seem to be
+ unused. The function display_board_info() is passed
+ board type as an argument; which is ignored.
+
+ This patch removes all uses of board-type, related definitions
+ and functions.
+
+ Signed-off-by: Sanjeev Premi <premi@ti.com>
+
+commit 6a6b62e3aa4b340c4f8fc67b1487ddb5436c684d
+Author: Sanjeev Premi <premi@ti.com>
+Date: Mon Apr 27 21:27:27 2009 +0530
+
+ OMAP3: Use functions print_cpuinfo() and checkboard()
+
+ Use the functions print_cpuinfo() and checkboard() to
+ display the cpu and board specific information.
+
+ These functions reuse content from the existing function
+ display_board_info() - which has been removed.
+
+ Also, updated the existig OMAP3 configurations to
+ define:
+ - CONFIG_DISPLAY_CPUINFO
+ - CONFIG_DISPLAY_BOARDINFO
+
+ Signed-off-by: Sanjeev Premi <premi@ti.com>
+
+commit f8e2b3107ee00f2782f8ebf47e3f09cda4e2353a
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 18 11:17:37 2009 +0100
+
+ MTD: Change cfi-mtd to accept non-uniform sector sizes
+
+ With this patch non-uniform NOR FLASH chips (chips with multiple erase
+ regions) can be exported via the cfi-mtd layer and therefor used by UBI.
+ We select the largest sector size as erasesize. The cfi driver will make
+ sure that the smaller sectors are handled correctly.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3dcbe628d66b648e954bc8147d4faff2983206d9
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Thu Apr 23 12:35:22 2009 +0200
+
+ video: fix bug in cfb_console.c code
+
+ Fix bug in drawing long version/info strings:
+ U-Boot version string like
+ "U-Boot 2009.03-05647-g7c51e06 (Apr 23 2009 - 12:40:00) MPC83XX"
+ is long and doesn't wrap around correctly while drawing
+ beside the logo. Such long strings partially overwrite
+ the logo. This patch is an attempt to fix it.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 4d9eab89b3b2c2ed432b14d355a56f274d8aac75
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Apr 28 08:50:31 2009 +0200
+
+ cmd_ext2.c: fix compile warnings
+
+ Get rid of these warnings:
+
+ cmd_ext2.c:247: warning: format '%ld' expects type 'long int', but argument 2 has type 'int'
+ cmd_ext2.c:248: warning: format '%lX' expects type 'long unsigned int', but argument 3 has type 'int'
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 28afe0160f87ff74574150d703055a965f91422a
+Author: Heiko Schocher <hs@denx.de>
+Date: Mon Apr 27 10:48:20 2009 +0200
+
+ ids8247: Remove legacy NAND defines
+
+ because legacy NAND support is deprecated converting to current
+ NAND interface. !This just compile, because I have no more the
+ hardware to test it.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit dbd33614404b65aa441c5620c3dbd560c4460c09
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Mon Apr 27 09:13:31 2009 +0200
+
+ ubifs: BUG realpath string must be ended with NULL
+
+ If the memory used to copy the link_make is "dirty" the string wont
+ be ended with NULL, throwing out multiple memory bugs.
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 65351a8793c51f3787efbbcf3aa1df0ad543c127
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Apr 24 15:59:56 2009 -0500
+
+ bmp_logo: Check return value of fread()
+
+ Add basic error handling to fread() function calls. This prevents
+ compililation warnings such as:
+
+ bmp_logo.c: In function ‘main’:
+ bmp_logo.c:71: warning: ignoring return value of ‘fread’, declared with
+ attribute warn_unused_result
+ ...
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit eea8be86d1c2b570660d1f6c553845e13164231a
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Apr 24 15:59:46 2009 -0500
+
+ ncb: Check return value of write()
+
+ This prevents the compilation warning:
+
+ ncb.c: In function 'main':
+ ncb.c:32: warning: ignoring return value of ‘write’, declared with
+ attribute warn_unused_result
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit dbe29e36a4c2775b69b5a63b0ce2bac89c08e691
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Apr 24 15:59:35 2009 +0200
+
+ mtd: nand/onenand: Register mtd device upon device scanning
+
+ With this patch the NAND and OneNAND devices are registered in the MTD
+ subsystem and can then be referenced by the mtdcore code (e.g.
+ get_mtd_device_nm()). This is needed for the new "ubi part" command
+ syntax without the flash type parameter (nor|nand|onenand).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 10bb62d85a0850dbad1fdd34123378686373f166
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Apr 24 15:58:33 2009 +0200
+
+ mtd: nand: Include linux/mtd/partitions.h in nand_base.h
+
+ This patch removes this compilation warning when CONFIG_MTD_PARTITIONS is
+ defined:
+
+ nand_base.c: In function 'nand_release':
+ nand_base.c:2922: warning: implicit declaration of function 'del_mtd_partitions'
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2d579e5060413af5a740cb396dc87e1ff31bf5a9
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Apr 24 20:24:19 2009 +0200
+
+ ubi: Remove flash selection parameter (nor|nand|onenand) from "ubi part"
+
+ This patch removes the now unnecessary flash type parameter from the
+ "ubi part" command. Currently the user has to define the type of flash
+ he will be using UBI on. Example:
+
+ => ubi part nor partition1
+
+ With this patch this type parameter is not needed anymore. The user can
+ now select the partition directly without the flash type paramter.
+ Example:
+
+ => ubi part partition1
+
+ This breaks backward compatibility right now because of the change in the
+ command syntax. But UBI support is still quite fresh and the advantage of
+ this new command is syntax big enough for this change. Additionally the
+ code is much cleaner now.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ CC: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 294f10ca9ea82a15e135dcb0fc658382ab206940
+Author: Detlev Zundel <dzu@denx.de>
+Date: Thu Apr 23 13:14:20 2009 +0200
+
+ mips/vcth: Use generic 16550 uart driver
+
+ As the common code also handles baudrate switching, which the board
+ specific vct.c driver did not support, this is one of the rare
+ occassions where deleting code actually adds a feature :)
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+ Acked-by: Stefan Roese <sr@denx.de>
+ Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit 0c8a84916c5dacccdc5b27b63fc463e9f3b04f07
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Tue Apr 21 02:26:31 2009 +0200
+
+ Separate mtdparts command from jffs2
+
+ On Thu, Mar 19, 2009 at 01:30:36PM +0100, Stefan Roese wrote:
+ > Currently the mtdparts commands are included in the jffs2 command support.
+ > This doesn't make sense anymore since other commands (e.g. UBI) use this
+ > infrastructure as well now. This patch separates the mtdparts commands from
+ > the jffs2 commands making it possible to only select mtdparts when no JFFS2
+ > support is needed.
+
+ One more leftover... Let nboot command know about partitions even if JFFS2
+ support is not enabled.
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 67c2e57c0875139dbfcd6f41c43e6ad0cb2e40c9
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Apr 20 11:22:13 2009 -0500
+
+ cmd_ide: Remove unused AmigaOneG3SE code
+
+ The output_data_short() and input_data_short() functions for the
+ AmigaOneG3SE are unused and result in compiler warnings.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit c93c102ace00764a56dbdf78bac134a23906721e
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Apr 20 11:21:40 2009 -0500
+
+ AmigaOneG3SE: Fix CONFIG_CMD_CONSOLE definition
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 54e822f9590cc6c70411bd8cabd42236e07a2aa7
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Apr 20 11:09:05 2009 -0500
+
+ Replace __asm references with __asm__
+
+ __asm__ follows gcc's documented syntax and is generally more common
+ than __asm. This change is only asthetic and should not affect
+ functionality.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit f9a109b3adc5e8647535357500e2a38f0558b5c2
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Apr 20 11:08:46 2009 -0500
+
+ Replace __attribute references with __attribute__
+
+ __attribute__ follows gcc's documented syntax and is generally more
+ common than __attribute. This change is only asthetic and should not
+ affect functionality.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 08f077da9298ff65cc6f85f90d2770000a1beee9
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Thu Apr 16 19:55:48 2009 -0700
+
+ mtdpart command: align output columns
+
+ Make the headers in the "mtdparts" command output line up
+ with their columns ... strike the extra TAB character.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit 06f41f825c23344d889d5419bb5eaeceb3ed2a02
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Thu Apr 16 10:51:03 2009 +0900
+
+ Remove sa1100.h
+
+ sa1100.h is not used anywhere, then remove it.
+
+ $ find . -name '*.h' -empty -print
+ ./include/sa1100.h
+ $ git grep 'sa1100.h' .
+ $
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7d3d30b1b3fbd0a07db254ead99fa6fff4f4d992
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 14 17:51:21 2009 +0200
+
+ UBIFS: Remove tnc_commit.c which is not used in the read-only version
+
+ I missed removing this file while implementing the UBIFS support. It's
+ not referenced at all, so let's remove it. Thanks to Artem Bityutskiy
+ for spotting.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6356daff70867822bdb23cea49f98e65421a25b8
+Author: Adrian Hunter <adrian.hunter@nokia.com>
+Date: Tue Apr 14 17:50:38 2009 +0200
+
+ UBIFS: fix recovery bug
+
+ UBIFS did not recovery in a situation in which it could
+ have. The relevant function assumed there could not be
+ more nodes in an eraseblock after a corrupted node, but
+ in fact the last (NAND) page written might contain anything.
+ The correct approach is to check for empty space (0xFF bytes)
+ from then on.
+
+ Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 351f40caf2f7806b2cefb93e077ea619b9f684e8
+Author: Gao Guanhua <B22826@freescale.com>
+Date: Tue Apr 14 14:37:35 2009 +0800
+
+ fs: Fix the wrong type of var
+
+ The filelen should be signed type, not unsigned type.
+ otherwise, The condition as below never take.
+ if (filelen < 0)
+
+ Signed-off-by: Gao Guanhua <B22826@freescale.com>
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 05f474c4d0469bebc0bb05df60a39dc7fdf28e62
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Apr 28 00:29:34 2009 +0200
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit ad74cae9ff8790727bc81ee91c6bca7d50dca446
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Thu Apr 16 23:15:15 2009 -0700
+
+ dm9000 EEPROM reading bugfix
+
+ Make the U-Boot dm9000 driver read addresses from EEPROM just
+ like Linux does ... read six bytes, instead of reading twelve
+ bytes and then discarding every other one.
+
+ Using the right Ethernet address is a big win.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d4c02e6f5d49880123e7f584b88f857ffd874381
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Wed Feb 25 14:27:24 2009 +0900
+
+ rtl8169: fix cache coherency problem
+
+ Fix the problem that cannot access actual data when CPU data cache enabled.
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ Tested-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit a85693b3bd4431b05b7df608b6f7733c0f80c53e
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Tue Apr 21 17:30:51 2009 +0200
+
+ OMAP3: Fix changed mmc init command
+
+ In recent U-Boot mmcinit changed to mmc init.
+
+ Signed-off-by: Steve Sakoman <steve@sakoman.com>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 34b76a14f676bc6501c27a96564e4dfb4793f033
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Apr 26 20:39:26 2009 +0200
+
+ lib_arm/board.c: remove misleading "test-only" comment.
+
+ For a long time, the print_cpuinfo() declaration in lib_arm/board.c
+ had been marked as "test-only", which is plain wrong considering
+ current usage. Delete this misleading comment.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 7239c5da5e9197accb3dfe395be4502c3b9bca8e
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Sun Apr 12 15:40:16 2009 -0700
+
+ minor DaVinci clock cleanup
+
+ Minor cleanup to clock-related defines for DaVinci DM6446 boards:
+
+ - CONFIG_SYS_CLK_FREQ is unused; remove it.
+
+ - CONFIG_SYS_NS16550_CLK must be the same as CONFIG_SYS_HZ_CLOCK
+
+ On DM6446 both of those peripheral clocks actually come from the
+ same source, the primary oscillator. Having them use the same
+ symbol avoids bugs in the clone'n'modify development cycle.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit ffd8c7170d55c34bbfcfd2c84093dcaff796cbf3
+Author: Minkyu Kang <mk7.kang@samsung.com>
+Date: Mon Apr 6 19:59:29 2009 +0900
+
+ s3c64xx: remove unnecessary definition
+
+ CONFIG_S3C6400 is must defined at config header file
+ That definition is unnecessary at this file
+
+ Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
+
+commit 14b9308d511b53042ef478936e367a67282df66a
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Apr 24 06:50:45 2009 +0200
+
+ 83xx: searching "muram-data" by compatible property
+
+ if using CONFIG_BOOTCOUNT_LIMIT feature on a MPC8360 CPU
+ in the muram-data node, the reg entry needs to be updated.
+ This is done in fdt_fixup_muram(), but we should use
+ the compatible "fsl,qe-muram-data" for searching the
+ node instead of searching the muram-data node with
+ an absolute path.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8e15088794807944b221c11609d36789efc7f767
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Thu Apr 23 21:29:34 2009 +0200
+
+ mpc83xx: MPC8360ERDK: fix environment offset configuration bug
+
+ The size of U-Boot binary for MPC8360ERDK increased
+ (> 2 flash sectors now), so 'saveenv' will partially
+ overwrite U-Boot in flash and will brick the board.
+ This patch moves environment offset to fourth flash
+ sector and also fixes CONFIG_SYS_MONITOR_LEN.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 3c172c4fdbbb5858fae38478d6399be4a16be3fc
+Author: Michael Zaidman <michael.zaidman@gmail.com>
+Date: Sat Apr 4 01:43:00 2009 +0300
+
+ NetLoop initialization bug
+
+ The patch fixes the bug of partial initialization of global network
+ parameters.
+
+ Upon u-boot's start up the first ping command causes a failure of the
+ consequent TFTP command. It happens in the recently added mechanism of
+ the NetLoop initialization where initialization of global network
+ parameters is separated in the NetInitLoop routine which is called per
+ env_id change. Thus, ping request will initialize the network parameters
+ necessary for ping operation only, afterwards the env_changed_id will be
+ set to the env_id that will prevent all following initialization requests
+ from other protocols.
+ The problem is that the initialized by ping subset of network parameters
+ is not sufficient for other protocols and particularly for TFTP which
+ requires the NetServerIp also.
+
+ Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit b11f664f52c2855990107c18f242223377183575
+Author: Timur Tabi <timur@freescale.com>
+Date: Thu Apr 9 10:27:05 2009 -0500
+
+ net: fix ULI 526x macro usage in netdev.h
+
+ Change netdev.h to use CONFIG_ULI526X instead of CONFIG_ULI526. CONFIG_ULI526X
+ is used everywhere else, so that's the correct macro name. Without this fix,
+ Ethernet will not work on the Freescale MPC8610 HPCD.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 7ee38c044ca5041d3378d6507580ea4ec344af96
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Sun Apr 12 15:38:06 2009 -0700
+
+ fix DaVinci NS16550_REG_SIZE regression
+
+ Update the DaVinci DM6446 boards to use the new convention
+ for CONFIG_SYS_NS16550_REG_SIZE ... the size hasn't changed
+ from the original 4 bytes, but these chips are little-endian.
+
+ (Resolves a regression added recently by the include/ns16550.h
+ patch to "Unify structure declaration for registers". The code
+ previously worked just fine because the registers were accessed
+ as host-endian words, not as bytes.)
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit dfc99e143fca44a492918ac6cf3f76ee9c2473a9
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Apr 12 22:29:20 2009 -0400
+
+ cmd_nand: drop duplicate NULL ptr check
+
+ The first if statement checks for NULL ptrs, so there is no need to check
+ it again in later else cases (such as .oob).
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Scott Wood <scottwood@freescale.com>
+
+commit 7732cef2eeb4e339cfcd8553fab773af73a20805
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Mon Apr 13 08:03:38 2009 -0700
+
+ CMD_UBI != MTD_PARTITIONS
+
+ Fix dependency goofage: it should certainly be possible to have the
+ partition support without bringing in UBI commands.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 6ebff365eb63093ca35b687316002535c6a18820
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Apr 16 21:30:48 2009 +0200
+
+ at91sam9/at91cap: fix CONFIG_SYS_HZ to 1000
+
+ The timer has been rewrote with a precision at ~0,18%
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Tested-by: Sergey Lapin <slapin@ossfans.org>
+ Tested-by: Eric BENARD <ebenard@free.fr>
+
+commit f0a2c7b4b64eacd06bb272856bcc056be8719f5a
+Author: Ilko Iliev <iliev@ronetix.at>
+Date: Thu Apr 16 21:30:48 2009 +0200
+
+ at91: add support for the PM9263 board of Ronetix GmbH
+
+ The PM9263 board is based on the AT91SAM9263-EK board.
+
+ Here is the page on Ronetix website:
+ http://www.ronetix.at/starter_kit_9263.html
+
+ Signed-off-by: Ilko Iliev <iliev@ronetix.at>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit dc39ae9513c32dfeb9e018dc0d22c6484514fefb
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Apr 16 21:30:44 2009 +0200
+
+ at91sam9/at91cap: improve clock framework
+
+ calculate dynamically the clock rate and pllb setting for usb
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit dd7c302099ef5590069bdbf292aaa8230cd59de7
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 15 14:08:48 2009 +0200
+
+ ppc4xx: Disable POST memory test on NAND-booting Kilauea
+
+ Don't run the memory POST on the NAND-booting version. It will
+ overwrite part of the U-Boot image which is already loaded from NAND
+ to SDRAM. We were just lucky that it booted at all with this SDRAM
+ test enabled.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9a929170be89b27bce677504da27e88600c06c49
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 15 14:06:26 2009 +0200
+
+ ppc4xx: Disable POST memory test on NAND-booting Sequoia
+
+ Don't run the memory POST on the NAND-booting version. It will
+ overwrite part of the U-Boot image which is already loaded from NAND
+ to SDRAM. We were just lucky that it booted at all with this SDRAM
+ test enabled.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 17c1b0e89b8be7d90f605eb19af9218c6275bfb3
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 15 11:32:53 2009 +0200
+
+ ppc4xx: Remove unused code for Sequoia NAND booting version
+
+ The current define of get_bus_freq() in the CONFIG_NAND_SPL #ifdef is not
+ used at all. This patch changes it's define to the currently used value of
+ 133333333 and removes the unnecessary code.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cf9409885cbe01405bad76790e99f8adf3351f4d
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 15 10:50:48 2009 +0200
+
+ ppc4xx: Add "booting from NAND" to 4xx NAND-booting targets
+
+ This additional text in the bootup log helps to see if the board is
+ configured for NAND-booting. Especially helpful for boards that can
+ boot from NOR and NAND (e.g. most of the AMCC eval boards).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5132106a27b8fb302677852b26ffd319b40d17e2
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 8 10:36:22 2009 +0200
+
+ ppc4xx: Fixup chip-selects in dtb for NAND-booting Sequoia
+
+ Currently the NOR & NAND support in Linux only works for the "standard"
+ Sequoia, the version booting for NOR flash. The NAND-booting version
+ has the chip-selects swapped. Here the chip-select mappings:
+
+ "Standard" NOR-booting version:
+ CS0 NOR
+ CS3 NAND
+
+ NAND-booting version:
+ CS0 NAND
+ CS3 NOR
+
+ With this path the dtb gets fixed-up, so that the correct chip-select
+ numbers are patched in the dtb enabling correct NOR & NAND support
+ in Linux on the NAND-booting Sequoia version.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit aad4eca4ba8d597747199d8af723426681557dda
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Apr 4 09:10:27 2009 -0400
+
+ Blackfin: audit UART for all known anomalies
+
+ There is no code change here, just new comments, but this keeps me from
+ having to do another audit from scratch in the future.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8ef929afa43c77c9573caa57c6e17a97a33775c0
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Apr 4 08:40:13 2009 -0400
+
+ Blackfin: add check for anomaly 05000362
+
+ DESCRIPTION:
+ The column address width settings for banks 2 and 3 are misconnected in
+ the SDRAM controller. Accesses to bank 2 will result in an error if the
+ Column Address Width for bank 3 (EB3CAW ) is not set to be the same as
+ that of bank 2.
+
+ WORKAROUND:
+ If using bank 2, make sure that banks 2 and 3 have the same column address
+ width settings in the EBIU_SDBCTL register. This must be the case
+ regardless of whether or not bank 3 is enabled.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c2e07449f546fb375289cdac1a608fdc20357873
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Apr 4 08:29:55 2009 -0400
+
+ Blackfin: add comment about anomaly 05000430 avoidance
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 48ab1509254a4c175e4f65c478a978928ffe09ec
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Apr 4 08:10:22 2009 -0400
+
+ Blackfin: add workaround for anomaly 05000242
+
+ DESCRIPTION:
+ If the DF bit is set prior to a hardware reset, the PLL will continue to
+ divide CLKIN by 2 after the hardware reset, but the DF bit itself will be
+ cleared in the PLL_CTL register.
+
+ WORKAROUND:
+ Reprogram the PLL with DF cleared if the desire is to not divide CLKIN by
+ 2 after reset.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit ce1fe4ba6bb9df7c57351436fa17d1af8bbe7916
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Apr 4 08:09:24 2009 -0400
+
+ Blackfin: add workaround for anomaly 05000171
+
+ DESCRIPTION:
+ The Boot ROM is executed at power up/reset and changes the value of the
+ SICA_IWR registers from their default reset value of 0xFFFF, but does not
+ restore them.
+
+ WORKAROUND:
+ User code should not rely on the default value of these registers. Set
+ the desired values explicitly.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 51ee6e057f7a920e2a125cd9f985d10f625e355f
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Apr 4 08:22:36 2009 -0400
+
+ Blackfin: update anomaly sheets
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit a343ba87ea0320ca0a4ecfa2c42cd9d4f18883df
+Author: Graf Yang <graf.yang@analog.com>
+Date: Sat Apr 4 07:45:57 2009 -0400
+
+ Blackfin: nand: flush peripheral before polling it
+
+ We need to make sure the data written to the nand flash controller makes
+ it there before we start polling its status register. Otherwise, we may
+ get stale data and return before the controller is actually ready.
+
+ Signed-off-by: Graf Yang <graf.yang@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Scott Wood <scottwood@freescale.com>
+
+commit 3ccbfb25f48af78e7092ac75f3115e924e76c748
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Sun Apr 5 11:43:28 2009 +0200
+
+ Support for PXA27X UDC.
+
+ This Patch adds Support for PXA27X UDC.
+ (Rebased to drivers/usb reorganisation)
+
+ Signed-off-by: Vivek Kutal <vivek.kutal@azingo.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 2731b9a86685190d26b1883f27afda5ac8e1a313
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Apr 3 12:46:58 2009 +0200
+
+ drivers/usb: regorganisation
+
+ move to linux usb driver organisation
+
+ as following
+
+ drivers/usb/gadget
+ drivers/usb/host
+ drivers/usb/musb
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit d04371a116d102e587ba7aa4c329b441cdbea3f4
+Author: Todor I Mollov <tmollov@ucsd.edu>
+Date: Sat Apr 4 06:53:06 2009 -0400
+
+ Blackfin: spi: make cs deassert function deterministic
+
+ Blackfin SPI driver was not driving the SPI chip-select high before
+ putting the chip-select signals into tri-state mode. This is probably
+ something that slipped by unnoticed in most designs. If the signals are
+ put directly into a tri-state mode, then the board is relying on the
+ pull-up resistors to pull up the chip-select before the next transaction.
+ Most of the time this is fine, except when you have two transactions that
+ follow each other very closely, such as the flash erase and read status
+ register commands. In this case I was seeing a 500ns separation between
+ the transactions. In my setup, with a 10kOhm pull-up, it would meet
+ timing spec about half the time and resulted in intermittent errors. (A
+ stronger pull up would fix this, but our design is targeted for low power
+ consumption and a 3.3kOhm @ 3.3v is 3.3mW of needless power consumption.)
+ I modified the spi_cs_deactivate() function in bfin_spi.c to drive the
+ chip-selects high before putting them into tri-state. For me, this
+ resulted in a rise time of 5ns instead of the previous rise time of about
+ 1us, and fully satisfied the timing spec of the chip.
+
+ Signed-off-by: Todor I Mollov <tmollov@ucsd.edu>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c6fadb9c73a6a3e0c7f20696e978304a593a8d2d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Dec 13 21:08:05 2008 +0100
+
+ integratorap: fix PCI support
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1c397508c836dfcb01fb2471c71de0727051f117
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Mon Mar 30 21:15:23 2009 +0200
+
+ OMAP3: Update Overo pin mux for new expansion board
+
+ A new Overo expansion board uses GPIO 14, 21, 22 and 23 for LED's and
+ switches. This patch changes the pinmux configuration for those pins.
+ They were previously set up for unused MMC3_DAT4-7.
+
+ Signed-off-by: Steve Sakoman <steve@sakoman.com>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit ab298231518675b3784aea88ee9b978438f99e63
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Apr 5 13:08:03 2009 +0200
+
+ arm: unify reset command
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit b3acb6cd4059dfb29a5e99095d802717f53ff784
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Apr 5 13:06:31 2009 +0200
+
+ arm: clean cache management
+
+ unify arm cache management except for non standard cache as ARM7TDMI
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 677e62f43235de9a1701204d7bcea0fb3d233fa1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Apr 5 13:02:43 2009 +0200
+
+ arm: update co-processor 15 access
+
+ import system.h from linux
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 23e4af49e066a53cd3e3659b68ef90572d88de84
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Sun Apr 5 00:42:02 2009 +0200
+
+ ARM: add the imx31_phycore_eet target to MAINTAINERS
+
+ imx31_phycore_eet is a variant of the imx31_phycore board with a few
+ extensions, which justifies a separate entry in the MAINTAINERS list,
+ whereas normally all entries sharing a single configuration file and a
+ board/ directory have only one entry in MAINTAINERS.
+
+ Reported-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 69c5bf29908b3a7f8e23bd9891b7ecc5b21f23e5
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Sun Apr 5 00:37:07 2009 +0200
+
+ ARM: fix out-of-tree build of imx31_phycore_eet
+
+ Fix out-of-tree build of the imx31_phycore_eet target.
+
+ Reported-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 3c853f31d6a8e4407f73a2ca2c63d383a245f237
+Author: Jon Smirl <jonsmirl@gmail.com>
+Date: Sat Apr 4 17:44:51 2009 -0400
+
+ mpc5200: reduce delays in i2c
+
+ The previous code waited 1000us before checking i2c
+ status. Measurement shows i2c is usually ready in
+ under 50us. Change the polling interval to 15us,
+ loop 6,667 times to keep the polling timeout constant
+ at 100ms.
+
+commit 36003268968949110ef145d9f2eaf8439c96d25b
+Author: Sanjeev Premi <premi@ti.com>
+Date: Fri Apr 3 14:00:07 2009 +0530
+
+ OMAP: Fix compile issue
+
+ Fixes this compile error:
+ board.c: In function 'do_switch_ecc':
+ board.c:339: error: 'cmd_tbl_t' has no member named 'help'
+ make[1]: *** [board.o] Error 1
+ make[1]: Leaving directory `/db/psp_git/users/a0756819/u-boot/cpu/arm_cortexa8/omap3'
+ make: *** [cpu/arm_cortexa8/omap3/libomap3.a] Error 2
+
+ This is due to the fact that current command uses long
+ help for the usage print even if the CONFIG_SYS_LONGHELP
+ is not enabled. (Thanks Jean-Christophe for explanation).
+
+ Signed-off-by: Sanjeev Premi <premi@ti.com>
+
+commit 342c1a5d9ab74febf3226a86216dc5aa05295d46
+Author: Minkyu Kang <mk7.kang@samsung.com>
+Date: Fri Apr 3 09:56:16 2009 +0900
+
+ s3c64xx: fix the wrong gpio offset
+
+ This patch fix the wrong gpio offset
+
+ Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
+
+commit ab0689c316c9b2ee33f4de1c50263b64e539f12a
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Wed Nov 26 10:18:13 2008 +0900
+
+ Move machine specific code to board at s3c64xx (v2)
+
+ Move machine specific code to smdk6400.
+ Some board use OneNAND instead of NAND.
+
+ Some register MP0_CS_CFG[5:0] are controled by both h/w and s/w.
+ So it's better to use macro instead of hard-coded value.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 767f3acd9f6e1dcb8ada926c333945382eddc7e8
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Wed Apr 1 22:02:19 2009 -0500
+
+ ZOOM1 Remove legacy NAND defines
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit 5891151707ee5902fe62d554c247f42865815757
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Wed Apr 1 22:02:20 2009 -0500
+
+ OMAP3 Fix multiline formatting in board init files.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit c0a14aedc3440d6591b8c86d45861a0a8b46e11d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Apr 5 00:27:57 2009 +0200
+
+ Update CHANGELOG, coding style cleanup.
+
+commit f63728c804ab7413a67d70f6774cd30c3f7b40fb
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Apr 5 00:18:44 2009 +0200
+
+ One more fix for building env_embedded.o
+
+ In addition to the changes for CONFIG_ENV_IS_IN_FLASH as done in
+ commit afcbce07, we also need to do the same for
+ CONFIG_ENV_IS_IN_EEPROM and CONFIG_ENV_IS_IN_NVRAM.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e3d1ac7bb1955d36980d267cb4cec40b0f7d30b5
+Author: Scott Wood <scottwood@freescale.com>
+Date: Thu Apr 2 16:15:10 2009 -0500
+
+ common/image.c: Relocate strings in tables.
+
+ Without this, u-boot can crash or print garbage if the original link
+ address no longer points to a valid string.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 3a671fc06ae1d9e8eba76600372317c75ae0eb3e
+Author: Scott Wood <scottwood@freescale.com>
+Date: Thu Apr 2 16:10:36 2009 -0500
+
+ mpc8260: Fill in brg's clock-frequency in device tree.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit c73ed274a211699739d83c2cef92853dc6716e15
+Author: Scott Wood <scottwood@freescale.com>
+Date: Thu Apr 2 18:20:43 2009 -0500
+
+ MPC8260ADS: Add nfsboot/ramboot to default environment.
+
+ This brings it in line with other Freescale boards.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit c203ef5db0476a8c4f6dd86b2e9e9db0ea973f84
+Author: Andreas Huber <andreas.huber@keymile.com>
+Date: Thu Apr 2 17:15:34 2009 +0200
+
+ UBI/cfi-mtd: Fix mtd name for multiple chips
+
+ On platforms with multiple NOR chips, currently only the first one
+ can be selected using the "ubi part" command. This patch fixes this
+ problem by using different names for the NOR "mtd devices".
+
+ It also changes the name of the NOR MTD device from "cfi-mtd" to
+ "norX" (X indexing the device numer) to better match the mtdparts
+ defaults.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Andreas Huber <andreas.huber@keymile.com>
+
+commit 6b6bb02f27fcabfb37ea717fb7e243248e1e2acf
+Author: Peter Korsgaard <jacmet@sunsite.dk>
+Date: Tue Mar 31 17:52:16 2009 +0200
+
+ tools/setlocalversion: use git svn instead of git-svn
+
+ Use the new "git <subcmd>" syntax instead of the deprecated
+ "git-<subcmd>".
+
+ Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
+
+commit 7fa96a9a54eb0d87d73888ec2565cda790ba0dff
+Author: Mingkai Hu <Mingkai.hu@freescale.com>
+Date: Tue Mar 31 14:09:40 2009 +0800
+
+ eSPI: add the eSPI register support
+
+ Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
+
+commit 869f6bf4def5a053fbd1aecd8b2fc36f05196c0b
+Author: Minkyu Kang <mk7.kang@samsung.com>
+Date: Mon Mar 30 14:55:51 2009 +0900
+
+ cmd_mmc: add support for device command for selecting mmc device
+
+ This patch improves device command for selecting mmc device
+
+ Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
+
+commit 9abc9ef8fbe079bf75a634ce64b7dcdb7b0d8bdc
+Author: Alan Carvalho de Assis <acassis@gmail.com>
+Date: Sat Mar 28 19:50:16 2009 -0300
+
+ Small fix to m5282evb
+
+ This is just a small fix to get u-boot on m5282evb.
+
+ Signed-off-by: Alan Carvalho de Assis <acassis@gmail.com>
+
+commit febd7e4174e54579c9aa165c85c519fe5288f9d2
+Author: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
+Date: Fri Mar 27 10:21:14 2009 +0100
+
+ UBIFS: add R/O compatibility
+
+ Now UBIFS is supported by u-boot. If we ever decide to change the
+ media format, then people will have to upgrade their u-boots to
+ mount new format images. However, very often it is possible to
+ preserve R/O forward-compatibility, even though the write
+ forward-compatibility is not preserved.
+
+ This patch introduces a new super-block field which stores the
+ R/O compatibility version.
+
+ Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
+ Acked-by: Adrian Hunter <Adrian.Hunter@nokia.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 852dbfdd56f68eb67d138b306a64e4de58dabb91
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Mar 23 22:27:34 2009 -0400
+
+ more command usage cleanup
+
+ Fix up a few dangling commands like in "Command usage cleanup" commit.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b93b24bf76f8a8220b236df3a5f30b2204eb4edc
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Mon Mar 23 12:06:07 2009 +0100
+
+ Separate mtdparts command from jffs2
+
+ On Thu, Mar 19, 2009 at 01:30:36PM +0100, Stefan Roese wrote:
+ > Currently the mtdparts commands are included in the jffs2 command support.
+ > This doesn't make sense anymore since other commands (e.g. UBI) use this
+ > infrastructure as well now. This patch separates the mtdparts commands from
+ > the jffs2 commands making it possible to only select mtdparts when no JFFS2
+ > support is needed.
+
+ ... and to make it useful for NAND chips as well, we should also remove now
+ unrelated CONFIG_JFFS2_NAND. Note that struct part_info etc is in
+ jffs2/load_kernel.h which is a bit misleading filename for that purpose,
+ but that can be fixed later (tm).
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+
+commit b196ca75503ce307c535b87bf47d51f05e7530df
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Mar 22 22:18:01 2009 -0400
+
+ smc91111_eeprom: move board-specific init into SMC91111_EEPROM_INIT()
+
+ Rather than sticking Blackfin-specific stuff into the eeprom example, use
+ an indirect macro so that any board can override it with their own magic
+ sauce in their board config file.
+
+ Also fix some spurious semi-colons in defines while I'm at it ...
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit f5cf2ef2ad2a8bf321712ab460ed846120163d74
+Author: Sascha Hauer <s.hauer@pengutronix.de>
+Date: Sat Mar 21 09:38:46 2009 -0400
+
+ mpc52xx phy: initialize only when needed
+
+ Do not initialize phy on startup, instead initialize it
+ when we actually need it.
+
+ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+
+commit 03bab0091948196b9558248684c04f60943ca4b5
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Mar 30 16:51:40 2009 +0200
+
+ at91sam9263ek: enable hush and auto complete support
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Stelian Pop <stelian@popies.net>
+
+commit 4758ebdd53571d4d183be5c2db8f0ee4ef368915
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Mar 27 23:26:44 2009 +0100
+
+ at91: move dataflash spi driver to drivers/spi
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2b7178afce59f71e95da657273f4132012098c1f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Mar 27 23:26:44 2009 +0100
+
+ at91: move usb driver to drivers/usb
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f82518d7f443ebac5f8821103a3c521c963aa6ee
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Mar 27 23:26:43 2009 +0100
+
+ at91rm9200: Reset update
+
+ Update the rm9200 reset sequence to try executing a board-specific reset
+ function and move specific board reset to board.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 3524049cd053746298e4cfab2449882e75c146fc
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Mar 27 23:26:43 2009 +0100
+
+ at91rm9200: move serial shutdown code to serial drivers
+
+ introduce serial_exit for this purpose. Use it only when the rm9200
+ serial driver is active
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit beebd851cdbc9dd070bcdfec1fd8f17e3cc91bc0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Mar 27 23:26:43 2009 +0100
+
+ at91rm9200: move serial driver to drivers/serial
+
+ add CONFIG_AT91RM9200_USART to activate the driver
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit cb82a532669f6b02225ec3429ea4d49ff2b97d0a
+Author: Ulf Samuelsson <ulf@atmel.com>
+Date: Fri Mar 27 23:26:43 2009 +0100
+
+ Add support for the AT91RM9200EK Board.
+
+ The AT91RM9200-EK Evaluation Board supports the AT91RM9200
+ ARM9-based 32-bit RISC microcontroller and enables real-time code development
+ and evaluation.
+
+ Here is the chip page on Atmel website:
+ http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507
+
+ with
+ - NOR (cfi driver)
+ - DataFlash
+ - USB OHCI
+ - Net
+ - I2C (hard)
+
+ Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit b9c0e4c29e3ec12668ac50e954e7c9ba8f7aa10a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Mar 27 23:26:42 2009 +0100
+
+ add dataflash mmc mux missing support
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2a325ce3c705ab2d82760afc541c511328472df8
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Mar 27 23:26:42 2009 +0100
+
+ at91rm9200dk: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 90a92a708d5180a20d600ba0fc2352ec76dc3829
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Mar 27 23:26:42 2009 +0100
+
+ at91: rename DATAFLASH_MMC_SELECT to CONFIG_DATAFLASH_MMC_SELECT
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 843a2654bce74192de2b5a43474fdc27a572ab40
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Mar 27 23:26:42 2009 +0100
+
+ at91sam9: add watchdog support
+
+ Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit a47492ac60657dd9d59c713aa049319ea6eabd52
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Mar 27 13:14:52 2009 +0100
+
+ at91sam9/at91cap: spi init add hardware chip select support
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 66932ac3929c7a145a6ef6574a96fd7535154951
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Apr 4 19:15:40 2009 +0200
+
+ netstar: fix crc32.c dependancy location
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 42f9ebff2f758bef524780a00c712eb63a72d99b
+Author: Scott Wood <scottwood@freescale.com>
+Date: Fri Apr 3 15:24:40 2009 -0500
+
+ MPC8260ADS: Define CONFIG_HAS_ETH0.
+
+ This is required so that the MAC address will be updated in the device tree.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 8701eceffdf77e2908d0b58add0dabc16edf6087
+Author: Scott Wood <scottwood@freescale.com>
+Date: Fri Apr 3 15:26:45 2009 -0500
+
+ PQ2FADS: Enable PCI.
+
+ PCI on PQ2FADS is very similar to PCI on MPC8272ADS.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 83863df04bd30bfe2430b0c43ca9f78596d3f0bc
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Apr 4 16:57:50 2009 +0200
+
+ Fix quoting bug introduced by commit 74de7aef
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit ecf3fb223a56e3c6aa696d94d694eeaca0f44d33
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Apr 4 16:14:51 2009 +0200
+
+ Fix implicit declaration of function 'htons'
+
+ Include <netinet/in.h> instead of <linux/in.h> to get htons()
+ prototpye.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e6a6789f41f0560ce280089fbd3f1bd0f0f64306
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Sat Apr 4 10:21:02 2009 -0500
+
+ fsl_law: Fix bug in calculation of LAW sizing
+
+ In set_ddr_laws() when we determined how much of the size requested
+ to be mapped was covered by the the first LAW we needed to recalculate
+ the size based on what was actually mapped.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 32049b4048ff8e59bd5ba6160d6d5206d283b2a2
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Apr 2 13:57:05 2009 -0500
+
+ fsl_pci: Move prototypes into fsl_pci.h and remove explicit externs
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c8514622e2713d9c47919acfe23fce386782afe7
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Apr 2 13:22:48 2009 -0500
+
+ fsl_pci: Renamed immap_fsl_pci.h to fsl_pci.h
+
+ Rename the pci header for FSL HW so we can move some prototypes
+ in there and stop doing explicit externs
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit afcbce07e9323c0e8aeb783ba7ce6104860fd7a7
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Apr 4 16:10:40 2009 +0200
+
+ Fix building of env_embedded.o
+
+ Since commit a706bfc7 common/env_embedded.o and tools/envcrc were
+ only built when CONFIG_ENV_IS_EMBEDDED was set, but this breaks
+ building for many boards.
+
+ We always have to build these files when CONFIG_ENV_IS_IN_FLASH is
+ set.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a31e091ad70915278fb15b79d6ae53ea2d44b251
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Apr 4 12:49:11 2009 +0200
+
+ rename include/zlib.h to include/u-boot/zlib.h
+
+ Some systems have zlib.h installed in /usr/include/. This isn't the
+ desired file for u-boot code - we want the one in include/zlib.h.
+ This rename will avoid the conflict.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit ae644c178f097874a92a6d934f364985fc7e075a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Apr 4 12:46:31 2009 +0200
+
+ tools/Makefile: fix image.c dependancy location
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b074a7081124d7f05fd1651a3bc0b5579fdfa473
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Apr 4 07:42:25 2009 -0400
+
+ tools: add ncb to gitignore
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 453c0d7558215cbc8636d94af172886d84e0dbba
+Author: Detlev Zundel <dzu@denx.de>
+Date: Fri Apr 3 16:45:46 2009 +0200
+
+ include/ns16550.h: Unify structure declaration for registers
+
+ Instead of special casing the different access patterns, use common
+ code with light macros sprinkled in to accomodate for the different
+ layouts of the register structure.
+
+ Note that this also changes the types of the registers for the
+ "positively packed (>1)" cases. As the registers truly are unsigned
+ chars, this is surely the Right Thing, but it is a semantic change.
+ Note that for this case depending on the endianness on the bus, we may
+ see a change of behaviour.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 0a145ce6e7075aa0f4869d6f6149a5ff205d95df
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:52 2009 -0500
+
+ Delete now unused tools/Makefile.win32
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 2f8d396b9302eddcd8d552648e101a46b7a80acd
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:51 2009 -0500
+
+ Add support for building native win32 tools
+
+ Add support for compiling the host tools in the tools directory using
+ the MinGW toolchain. This produces executables which can be used on
+ standard Windows computers without requiring cygwin.
+
+ One must specify the MinGW compiler and strip utilities as if they
+ were the host toolchain in order to build win32 executables, eg:
+
+ make HOSTCC=i586-mingw32msvc-gcc HOSTSTRIP=i586-mingw32msvc-strip tools
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit e50abf662efbf4ce0e731062c8d3c8ec54763ae2
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:50 2009 -0500
+
+ tools/Makefile: Simplify HOST_CFLAGS/HOST_LDFLAGS generation
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit b0d4d7219a4806e46affc96bd1f65397194a6e72
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:49 2009 -0500
+
+ tools/Makefile: Create generic build rules
+
+ Create a few generic build rules to replace the current method which has
+ 1 build target for each file
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 273174ddbcce215c42f6c307470cd5580a3f72bf
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:48 2009 -0500
+
+ tools/Makefile: Use auto-generated object file dependencies
+
+ Files in the SRCS variable have their dependencies automatically
+ generated so remove duplicate explicit dependencies
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit fb8b33c1e6d621ea3347a75ad3a42a386b44e589
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:47 2009 -0500
+
+ tools/Makefile: Remove symlinks for remaining source files
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit eed073315b6447eceadf7468a4c2b757442c7c6f
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:46 2009 -0500
+
+ tools/Makefile: Dynamically generate libfdt object dependencies
+
+ Add the libfdt files to the SRCS variable so that they have their
+ dependencies automatically generated
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit c0170175393b94560fa7a5da6dd31377df5f4a72
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:45 2009 -0500
+
+ tools/Makefile: Remove symlinks for fdt targets
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 45d6bdff68877ea214ff33cc1c89a29c76e96f51
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:44 2009 -0500
+
+ tools/Makefile: Add libfdt/ to the include search path
+
+ This change makes the process of symlinking libfdt_internal.h
+ unnecessary
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit fba0e3a0814f9bf48c32a4c8a7987c36ae96651b
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:43 2009 -0500
+
+ tools: Remove unecessary symlinking of zlib.h
+
+ crc32.c uses the zlib.h header in include/u-boot/zlib.h. The symlink
+ was previously necessary to give U-Boot's version of zlib.h precedence
+ over the host computer's version of zlib.h.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 40b8d909ace06f6f494dee08ffa64a82493e72e9
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:42 2009 -0500
+
+ tools/Makefile: Add tools/ to the include search path
+
+ This change makes the process of symlinking mkimage.h and fdt_host.h
+ unnecessary
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 1cd300de5e19c9e8383ee2eb2b6bd3b8b9378c78
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:41 2009 -0500
+
+ tools/Makefile: Compile ncb when CONFIG_NETCONSOLE
+
+ Also conditionally add ncb.o to OBJ_FILES list
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 123c48a21ce08b4a33f36e96cc75f92324e761d7
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:40 2009 -0500
+
+ tools/Makefile: Make gen_eth_addr dependent upon CONFIG_CMD_NET
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 4d93a0a807b8ca0289ba5da00c646cd2d54af120
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:39 2009 -0500
+
+ tools/Makefile: Make envcrc dependent upon CONFIG_ENV_IS_EMBEDDED
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit cd26a31a23f9a58ba52870f8ffb57d77d1baee20
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:38 2009 -0500
+
+ tools/Makefile: Make inca-swap-bytes dependent on CONFIG_INCA_IP
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 7cd5cbc34699ccc15d0277f48375cad928d04faf
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:37 2009 -0500
+
+ tools/Makefile: Make ubsha1 dependent upon CONFIG_SHA1_CHECK_UB_IMG
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit eeba8617908e33f7e7db3b1588c04ca65b856793
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:36 2009 -0500
+
+ tools/Makefile: Make img2srec dependent upon CONFIG_CMD_LOADS
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 335ffe7e0e0a30e90ce409c3279016a582157d8e
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:35 2009 -0500
+
+ tools/Makefile: Build bmp_logo only when LCD or VIDEO logos are enabled
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit ee3584a5970230ee96aae19505ad3226734ee4ff
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:34 2009 -0500
+
+ tools/Makefile: Split variable declarations into multiple lines
+
+ Split variable declarations into multiple lines and use the standard
+ VAR-y convention. Also move object and binary variable declarations to
+ after config.mk has been included to allow for these lists to utilize
+ the CONFIG_XXX variables.
+
+ These changes lay the groundwork for conditional compilation of files
+ in the tools directory.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 21d28e95ed874ab1ed9787f939d8a53e99d30ddb
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:33 2009 -0500
+
+ tools/Makefile: Remove inappropriate double-tabs
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 652f4ba076689fd0acd447561a777b1c440a4b57
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:32 2009 -0500
+
+ tools/Makefile: Remove HOSTARCH HOSTOS defines
+
+ The values of HOSTARCH and HOSTOS which are exported from the top-level
+ Makefile should be used
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 2eeb4e95fbfafe54645fae7ec0b2594101f0573b
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:31 2009 -0500
+
+ gen_eth_addr: Use POSIX rand() and srand()
+
+ Replace random()/srandom() use with rand()/srand() to support
+ compilation with the mingw toolchain. The rand()/srand() functions are
+ generally more common and are functionally equivalent to the original
+ random()/srandom() calls.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 24d2ae5e9debe4b75151a55251031a14477fa875
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:28 2009 -0500
+
+ elf.h: Use stdint.h to provide standard typedefs for WIN32
+
+ The original code provided an incomplete set of typedefs for WIN32
+ compiles and replicated the standard typedefs that are already
+ provided by stdint.h
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit a706bfc7d0e2d1935c5670045288e6cd1ffdfabc
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:27 2009 -0500
+
+ common/Makefile: Conditionally compile env_embedded.o
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 2b48f7d5f62835f87278efb498397b6ae9e2d117
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:26 2009 -0500
+
+ Makefile: Add removal of *.exe files to clean target
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit d0d6144e0e4a03a68311b781f3dde38dc9316b82
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:25 2009 -0500
+
+ Makefile: Make autoconf.mk a dependency of the depend target
+
+ The original code did not generate autoconf.mk until after some targets
+ dependencies had already been calculated, for example the directories in
+ the SUBDIRS variable
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 75eb82ec7cacb18d059d701b35677b93d2bb7596
+Author: unsik Kim <donari75@gmail.com>
+Date: Wed Feb 25 11:31:24 2009 +0900
+
+ mflash: Initial mflash support
+
+ Mflash is fusion memory device mainly targeted consumer eletronic and
+ mobile phone.
+ Internally, it have nand flash and other hardware logics and supports
+ some different operation (ATA, IO, XIP) modes.
+
+ IO mode is custom mode for the host that doesn't have IDE interface.
+ (Many mobile targeted SoC doesn't have IDE bus)
+
+ This driver support mflash IO mode.
+
+ Followings are brief descriptions about IO mode.
+
+ 1. IO mode based on ATA protocol and uses some custom command. (read
+ confirm, write confirm)
+ 2. IO mode uses SRAM bus interface.
+
+ Signed-off-by: unsik Kim <donari75@gmail.com>
+
+commit 200779e3e2a9aeda7030b171a8c39d7797019917
+Author: Detlev Zundel <dzu@denx.de>
+Date: Fri Apr 3 11:53:01 2009 +0200
+
+ Rename common ns16550 constants with UART_ prefix to prevent conflicts
+
+ Fix problems introduced in commit
+ 7b5611cdd12ca0cc33f994f0d4a4454788fc3124 [inka4x0: Add hardware
+ diagnosis functions for inka4x0] which redefined MSR_RI which is
+ already used on PowerPC systems.
+
+ Also eliminate redundant definitions in ps2mult.h. More cleanup will
+ be needed for other redundant occurrences though.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 99067b08f4a0ce20ff337a35211239f334d8f451
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Apr 1 15:33:24 2009 -0500
+
+ Noisily disable the legacy NAND subsystem.
+
+ Legacy NAND is marked for feature removal after April 2009 (i.e. this
+ upcoming release). There are still several boards that reference it
+ (though many do so only for disk-on-chip support which has been silently
+ disabled for a while now). These boards will now fail to build
+ with #error, though the code is still there if the user removes #error.
+
+ The plan is to remove the code outright in the next release, along with
+ any board code that refers to it (such as board/esd/common/auto_update.c).
+
+ Also, remove the legacy NAND API description from README.nand.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 69bcabb51686fdd133cb1848c0d3b0a4fc6ca5cf
+Author: apgmoorthy <moorthy.apg@samsung.com>
+Date: Fri Mar 27 14:45:23 2009 +0530
+
+ Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN
+
+ Currently OneNAND initial program loader (ipl) reads only block 0 ie 128KB.
+ However, u-boot image for apollon board is 195KB making the board
+ unbootable with OneNAND.
+
+ Fix ipl to read CONFIG_SYS_MONITOR_LEN.
+ CONFIG_SYS_MONITOR_LEN macro holds the U-Boot image size.
+
+ Signed-off-by: Rohit Hagargundgi <h.rohit@samsung.com>
+ Signed-off-by: Gangheyamoorthy <moorthy.apg@samsung.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 74de7aefd79690bae8cf5a5120f5962d444be089
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Apr 1 23:34:12 2009 +0200
+
+ Add "source" command; prepare removal of "autoscr" command
+
+ According to the doc/feature-removal-schedule.txt, the "autoscr"
+ command will be replaced by the "source" command in approximately 6
+ months from now.
+
+ This patch prepares this change and starts a 6 month transition
+ period as follows:
+
+ - The new "source" command has been added, which implements exactly
+ the same functionlaity as the old "autoscr" command before
+ - The old "autoscr" command name is kept as an alias for compatibility
+ - Command sequences, script files atc. have been adapted to use the
+ new "source" command
+ - Related environment variables ("autoscript", "autoscript_uname")
+ have *not* been adapted yet; these will be renamed resp. removed in
+ a separate patch when the support for the "autoscr" command get's
+ finally dropped.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 78237df55248034a2d7c2daea992b9dbe7ca8e96
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Apr 2 17:31:09 2009 +0200
+
+ Add "GPL cleanup" task to feature-removal-schedule.txt
+
+ Announce removal of all non-GPL or GPL-incompatible files
+ after August 2009.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d9596ffbdc79cea285010b67dd20a4618303f624
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Apr 2 12:51:28 2009 -0400
+
+ sf: stmicro: dont send 4 bytes when reading status register
+
+ I can't find anywhere in the datasheet that says the status register needs
+ 3 dummy bytes sent to it before being able to read back the first real
+ result. Tests on a Blackfin board show that after writing the opcode, the
+ status register starts coming back immediately. So only write out the
+ read status register opcode before polling the result.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Jason McMullan <mcmullan@netapp.com>
+ CC: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 1abe365ffcfc29c061e8fd8b45551be5ad1428dd
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Apr 2 08:11:31 2009 -0400
+
+ sf: set common timeouts in seconds, not milliseconds
+
+ Since timeouts are only hit when there is a problem in the system, we
+ don't want to prematurely timeout on a functioning setup. Thus having
+ low timeouts (in milliseconds) doesn't gain us anything in the production
+ case, but rather increases likely hood of causing problems where none
+ otherwise exist.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 2a6ce1115b3cbe746965cfa0058ce645b6c1ada1
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Apr 2 06:51:49 2009 -0400
+
+ sf: stmicro: use common page timeout define
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 0dcdbb172c2fdf60c5c578980308b312fd56496f
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Mar 28 06:41:09 2009 -0400
+
+ sf: always read 5 bytes for the idcode
+
+ Some SPI flash drivers like to have extended id information available
+ (like the spansion flash), so rather than making it re-issue the ID cmd
+ to get at the last 2 bytes, have the common code read 5 bytes rather than
+ just 3. This also matches the Linux behavior where it always reads 5 id
+ bytes from all flashes.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+ CC: Mingkai Hu <Mingkai.hu@freescale.com>
+
+commit 9726ba4abaa16cd6c385ad350d403f98a8eacf52
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Mar 27 16:34:21 2009 -0400
+
+ sf: stmicro: drop redundant id read
+
+ The common SPI flash code reads the idcode and passes it down to the SPI
+ flash driver, so there is no need to read it again ourselves.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+ CC: Jason McMullan <mcmullan@netapp.com>
+ CC: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 1c5874374e091b4bb62917c519861f7682fe066e
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Mar 27 19:27:58 2009 -0400
+
+ sf: add driver for SST flashes
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit f773a1bbdb8f3bf1ddab2874f36f043c4f8f044d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Mar 23 23:03:58 2009 -0400
+
+ sf: drop DEBUG defines
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 6b850a9fa8a216f3692da2511cb1a6c16409b1af
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Jan 4 07:44:07 2009 +0100
+
+ mtd: add some at45 spi flash support
+
+ - AT45DB321D
+ - AT45DB161D
+ - AT45DB081D
+ - AT45DB041D
+ - AT45DB021D
+ - AT45DB011D
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 6805e4bf83e6f444f7411101228766c8a7aec5f7
+Author: Mingkai Hu <Mingkai.hu@freescale.com>
+Date: Tue Mar 31 14:09:41 2009 +0800
+
+ mtd: SPI Flash: Support the Spansion Flash
+
+ Add MTD SPI Flash support for S25FL008A, S25FL016A,
+ S25FL032A, S25FL064A, S25FL128P.
+
+ Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 40587701924aa0afc86b3840421b4cc6de42c748
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Mar 30 20:56:45 2009 -0400
+
+ Blackfin: force all boards to HZ of 1000
+
+ Since the Blackfin timer code requires HZ to be 1000, barf on any board
+ that tries to use a different value.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit f4032d2eec9d71a59c6c724671e577f67a76839b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Mar 27 21:07:45 2009 -0400
+
+ Blackfin: bf533-stamp: drop old spi flash driver
+
+ Now that the common SPI flash code supports all the flashes, we can stop
+ using the old driver.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit bc72f50a659d0d1b551817e1910b9b2be1c7e496
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Mar 26 15:42:12 2009 -0400
+
+ Blackfin: add BF538/BF539 SPI portmux handling
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 46ac352f0f9406a5f9aa157ac62867fb4650dfd3
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Mar 23 22:36:10 2009 -0400
+
+ Blackfin: do not delay on output bytes
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit dbc6ab9f75bd0c13d3f42692e9463f8ab65fc382
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Mar 23 22:17:27 2009 -0400
+
+ Blackfin: drop newline from OTP help
+
+ Looks like I accidentally added a newline to the OTP help when merging and
+ older change.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d3c38d96b991d641a33f7748130dae008563cdc9
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Mar 22 23:43:31 2009 -0400
+
+ Blackfin: convert bfin_sdh to legacy mmc
+
+ The Blackfin SDH controller is still using the legacy framework, so update
+ the driver to use the renamed functions.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d248cfb2d940b742f6bfdba9b832a3df96da3101
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Feb 22 16:30:38 2009 -0500
+
+ Blackfin: bf537-stamp: split CF/IDE code out into dedicated cf-ide.c
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit ad9073211ca9e62162a39851e082b8d07a662fb6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Feb 13 17:10:58 2009 -0500
+
+ Blackfin: fix crash when booting from external memory
+
+ When testing a u-boot binary that hasn't been booted from the bootrom, we
+ have to make sure the bootstruct structure has sane storage space. If we
+ don't, the initcode will crash when it tries to dereference an invalid
+ pointer.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 84a9dda324c3faa56be14449d7519b993d9397a9
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 21:32:52 2008 -0400
+
+ Blackfin: bf518f-ezbrd: new board port
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 0c31ddf7b70f77dede42dc82ecab7753a819acaa
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 21:30:48 2008 -0400
+
+ Blackfin: bf526-ezbrd: new board port
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 5c45f7cac2f74e2c14aa6b028cd969651cc9ac8e
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 21:25:33 2008 -0400
+
+ Blackfin: bf538f-ezkit: new board port
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d9a5d113b93583c984711127ab8503e136ed1e4a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 20:59:12 2008 -0400
+
+ Blackfin: bf527-ezkit: new board port
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 76d21803ddd7dc4bcb81739ea2d3cd679e052f46
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 05:05:42 2008 -0400
+
+ Blackfin: bf548-ezkit: new board port
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 67b89c79e72fe86b0ea0199425d880630beb95d8
+Author: Laurent Gregoire <laurent.gregoire@tomtom.com>
+Date: Tue Mar 3 14:23:59 2009 +0100
+
+ libfdt: Fix C++ compile-time cast error on gnu 4.2.1
+
+ Allow the inclusion of libfdt.h in C++ source.
+
+ Signed-off-by: Laurent Gregoire <laurent.gregoire@tomtom.com>
+ Acked-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit 13d93f38e86818739317b0206d597265cf9e675e
+Author: Emil Medve <Emilian.Medve@Freescale.com>
+Date: Mon Feb 23 10:43:36 2009 -0600
+
+ Fix a possible overflow case detected by gcc 4.3.2
+
+ .../dtc/libfdt/fdt_sw.c: In function 'fdt_end_node':
+ .../dtc/libfdt/fdt_sw.c:81: error: assuming signed overflow does not occur when assuming that (X + c) < X is always false
+
+ Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
+
+commit a22d9cfbb5bcfb3dc6ffd64d391b568e8a0ce383
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Fri Feb 6 14:03:24 2009 +1100
+
+ libfdt: Rework/cleanup fdt_next_tag()
+
+ Currently, callers of fdt_next_tag() must usually follow the call with
+ some sort of call to fdt_offset_ptr() to verify that the blob isn't
+ truncated in the middle of the tag data they're going to process.
+ This is a bit silly, since fdt_next_tag() generally has to call
+ fdt_offset_ptr() on at least some of the data following the tag for
+ its own operation.
+
+ This patch alters fdt_next_tag() to always use fdt_offset_ptr() to
+ verify the data between its starting offset and the offset it returns
+ in nextoffset. This simplifies fdt_get_property() which no longer has
+ to verify itself that the property data is all present.
+
+ At the same time, I neaten and clarify the error handling for
+ fdt_next_tag(). Previously, fdt_next_tag() could return -1 instead of
+ a tag value in some circumstances - which almost none of the callers
+ checked for. Also, fdt_next_tag() could return FDT_END either because
+ it encountered an FDT_END tag, or because it reached the end of the
+ structure block - no way was provided to tell between these cases.
+
+ With this patch, fdt_next_tag() always returns FDT_END with a negative
+ value in nextoffset for an error. This means the several places which
+ loop looking for FDT_END will still work correctly - they only need to
+ check for errors at the end. The errors which fdt_next_tag() can
+ report are:
+ - -FDT_ERR_TRUNCATED if it reached the end of the structure
+ block instead of finding a tag.
+
+ - -FDT_BADSTRUCTURE if a bad tag was encountered, or if the
+ tag data couldn't be verified with fdt_offset_ptr().
+
+ This patch also updates the callers of fdt_next_tag(), where
+ appropriate, to make use of the new error reporting.
+
+ Finally, the prototype for the long gone _fdt_next_tag() is removed
+ from libfdt_internal.h.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit 2c0b843e710aa1e2da25c2592e6dbe5d0b0ab7da
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Fri Feb 6 14:01:56 2009 +1100
+
+ libfdt: Rework fdt_next_node()
+
+ Currently fdt_next_node() will find the next node in the blob
+ regardless of whether it is above, below or at the same level in the
+ tree as the starting node - the depth parameter is updated to indicate
+ which is the case. When a depth parameter is supplied, this patch
+ makes it instead terminate immediately when it finds the END_NODE tag
+ for a node at depth 0. In this case it returns the offset immediately
+ past the END_NODE tag.
+
+ This has a couple of advantages. First, this slightly simplifies
+ fdt_subnode_offset(), which no longer needs to explicitly check that
+ fdt_next_node()'s iteration hasn't left the starting node. Second,
+ this allows fdt_next_node() to be used to implement
+ _fdt_node_end_offset() considerably simplifying the latter function.
+
+ The other users of fdt_next_node() either don't need to iterate out of
+ the starting node, or don't pass a depth parameter at all. Any
+ callers that really need to iterate out of the starting node, but keep
+ tracking depth can do so by biasing the initial depth value.
+
+ This is a semantic change, but I think it's very unlikely to break any
+ existing library users.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit c123098035be8bae3859bbfbd06861f197c07631
+Author: Scott Wood <scottwood@freescale.com>
+Date: Tue Mar 31 17:49:36 2009 -0500
+
+ mpc83xx: Set guarded bit on BAT that covers the end of the address space
+
+ The mpc8313erdb board currently sets DBAT6 to cover all of the final 256MiB of
+ address space; however, not all of this space is covered by a device. In
+ particular, flash sits at 0xfe000000-0xfe7fffff, and nothing is mapped
+ at the far end of the address space.
+
+ In zlib, there is a loop that references p[-1] if p is non-NULL. Under
+ some circumstances, this leads to the CPU speculatively loading from
+ 0xfffffff8 if p is NULL. This leads to a machine check.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+ continuation to the remaining mpc83xx boards that suffer from the same problem.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit c2eb8be7f760a2efe30a495bfb10857838dcf3fa
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Mon Mar 30 14:28:05 2009 -0500
+
+ rtc: remove broken rtc_read and rtc_write declarations
+
+ commit 04e11cf3 "rtc: add support for 4543 RTC (manufactured by e.g.
+ EPSON)" introduces the following build error on boards configuring e.g,
+ the ds1374 rtc:
+
+ Configuring for MPC837XEMDS board...
+ ds1374.c:103: error: static declaration of 'rtc_read' follows non-static declaration
+ /home/r1aaha/git/u-boot/include/rtc.h:64: error: previous declaration of 'rtc_read' was here
+ ds1374.c:104: error: conflicting types for 'rtc_write'
+ /home/r1aaha/git/u-boot/include/rtc.h:65: error: previous declaration of 'rtc_write' was here
+
+ this reverts the erroneous chunk.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+ Acked-by: Detlev Zundel <dzu@denx.de>
+ CC: Detlev Zundel <dzu@denx.de>
+ CC: Andreas Pfefferle <ap@denx.de>
+
+commit fc39c2fd51e64707de4d61ed49479ebea2847e1b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Mar 31 17:58:13 2009 -0500
+
+ 85xx/86xx: Ensure MP boot page is not used
+
+ We had a bug on 86xx in which the boot page used to bring up secondary
+ cores was being overwritten and used for the malloc region in u-boot.
+
+ We need to reserve the region of memory that the boot page is going to
+ be put at so nothing uses it.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit c840d26c752141b94bbc24ac748ddd45752a955a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Mar 31 23:11:05 2009 -0500
+
+ 85xx: Introduce determine_mp_bootpg() helper.
+
+ Match determine_mp_bootpg() that was added for 86xx. We need this to
+ address a bug introduced in v2009.03 with 86xx MP booting. We have to
+ make sure to reserve the region of memory used for the MP bootpg() so
+ other u-boot code doesn't use it.
+
+ Also added a comment about how cpu_reset() is dealing w/an errata on
+ early 85xx MP HW.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 7649a590b53ee548f41428bf20780f74ce9fc099
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Mar 31 23:02:38 2009 -0500
+
+ 86xx: Cleanup MP support
+
+ * Use CONFIG_MP instead of CONFIG_NUM_CPUS to match 85xx
+ * Introduce determine_mp_bootpg() helper. We'll need this to address a
+ bug introduced in v2009.03 with 86xx MP booting. We have to make sure
+ to reserve the region of memory used for the MP bootpg() so other
+ u-boot code doesn't use it.
+ * Added dummy versions of cpu_reset(), cpu_status() & cpu_release() to
+ allow cmd_mp.c to build and work. In the future we should look at
+ implementing all these functions. This could be common w/85xx if we
+ use spin tables on 86xx.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f6ef8b7a43ed7f68a4bb524faad5e4f75ea3e3e2
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Tue Mar 31 18:38:37 2009 -0500
+
+ mpc8641hpcn/sbc8641d: Add missing board_lmb_reserves
+
+ We're missing the board_lmb_reserve definitions that allow
+ cpu_mp_lmb_reserve to be called; this means that Linux
+ is free to reallocate reserved pages. Linux currently boots
+ because we're getting lucky - the page we've reserved is
+ high enough in memory that it isn't allocated by Linux
+ while we still need it to be in existence.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0fc4f64c59873a47d555dd66bad25797d4ecb0ed
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Tue Mar 31 13:43:10 2009 +0200
+
+ NetStar: fix NAND
+
+ Fix NAND support broken during new NAND code merge. Move those few lines of
+ code to board/netstar/netstar.c
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+
+commit d144f94d590b5190a9963bd0f2026b2a7ce67eda
+Author: Jens Scharsig <esw@bus-elektronik.de>
+Date: Tue Mar 31 08:18:29 2009 +0200
+
+ soft_i2c.c compiler/linker error
+
+ This patch fix the compiler/linker errors
+
+ common/cmd_i2c.c:1252: undefined reference to `i2c_get_bus_speed'
+ common/cmd_i2c.c:1256: undefined reference to `i2c_set_bus_speed'
+
+ if board use CONFIG_I2C_CMD_TREE and CONFIG_I2C_MULTI_BUS is not
+ uesd/undef (wrong define order)
+
+ and
+
+ removes additional empty lines
+
+ Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
+
+commit 765547dc5e0e8cbe6b8f4ea8a5d6ff237935c352
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri Mar 27 17:02:45 2009 -0400
+
+ MPC85xx: Add MPC8569MDS board support
+
+ This patch adds MPC8569MDS board support. The UART, QE UEC1 and UEC2, BRD
+ EEPROM on I2C2 bus, PCI express and DDR3 SPD are supported in this patch.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Hillel Avni <Hillel.Avni@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 22b6dbc1696d927d938dd4e16f65d83c0d4fb3f4
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri Mar 27 17:02:44 2009 -0400
+
+ MPC85xx: Add MPC8569 CPU support
+
+ There is a workaround for MPC8569 CPU Errata, which needs to set Bit 13 of
+ LBCR in 4K bootpage. We setup a temp TLB for eLBC controller in bootpage,
+ then invalidate it after LBCR bit 13 is set.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2d4de6ae5be54b367a72a7ef4e0cf36a9cd4881f
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Thu Mar 26 17:01:49 2009 -0400
+
+ MPC85xx: Load and enable QE microcode patch in IRAM
+
+ For the silicon which doesn't have ROM support in QE, it always needs to load
+ a pre-built ucode binary to IRAM so that QE can work.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Hillel Avni <Hillel.Avni@freescale.com>
+
+commit 1b3e4044a28a3d95b0aad41bdc52482bb2cc9b2b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Mar 19 09:16:10 2009 -0500
+
+ 85xx: Add support for additional e500mc features
+
+ * Enable backside L2
+ * e500mc no longer has timebase enable in HID (moved to CCSR register)
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c360ceac0286159f94d9d1a9496fc9858c8d9bec
+Author: Dave Liu <daveliu@freescale.com>
+Date: Sat Mar 14 12:48:30 2009 +0800
+
+ fsl-ddr: add the DDR3 SPD infrastructure
+
+ - support mirrored DIMMs, not support register DIMMs
+ - test passed on P2020DS board with MT9JSF12872AY-1G1D1
+ - test passed on MPC8569MDS board with MT8JSF12864HY-1G1D1
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Travis Wheatley <travis.wheatley@freescale.com>
+
+commit 6a8197836702991468cead5ead073f589e2623ad
+Author: Dave Liu <daveliu@freescale.com>
+Date: Sat Mar 14 12:48:19 2009 +0800
+
+ fsl-ddr: Fix two bugs in the ddr infrastructure
+
+ 1. wr_lat
+ UM said the total write latency for DDR2 is equal to
+ WR_LAT + ADD_LAT, the write latency is CL + ADD_LAT - 1.
+ so, the WR_LAT = CL - 1;
+ 2. rd_to_pre
+ we missed to add the ADD_LAT for DDR2 case.
+
+ Reported-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 540dcf1cb86961e11aa92c47671f27762c581d8c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Mar 26 01:34:39 2009 -0500
+
+ 83xx: Use common LSDMR defines from asm/fsl_lbc.h
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit b0fe93eda69721aef1fdef576164b668fad83bbd
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Mar 26 01:34:38 2009 -0500
+
+ 85xx: Use common LSDMR defines from asm/fsl_lbc.h
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0088c298f0eeb90ec001f744e9959dea83dd563a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Mar 26 01:34:37 2009 -0500
+
+ Add LSDMR (SDRAM Mode Register) definition on localbus
+
+ The masks for various bit defines of LSDMR are common and thus we can
+ define them in one place rather than replicating them in each config.h
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 89c00fb15859213788f0ad089934c376fb356099
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Mon Mar 30 18:58:41 2009 +0200
+
+ OMAP: use {read,write}l to access timer registers
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+
+commit 81472d893fa565c9d300928a40e504a689bde131
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Mon Mar 30 18:58:41 2009 +0200
+
+ OMAP: rename timer divisor
+
+ Divisor field is called PTV not PVT.
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit fe672d60b2a8c9e803596ba4533fa1776015551d
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Mon Mar 30 18:58:40 2009 +0200
+
+ OMAP: reindent timer code
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+
+commit b3f66b0ba09949e0796ce7fad6367f75f15ed890
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Mar 30 18:58:40 2009 +0200
+
+ s3c2410: move nand driver to drivers/mtd/nand
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d3b635774194404bcd424f6b376419bce22076ad
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Mar 30 18:58:40 2009 +0200
+
+ s3c24x0: move i2c driver to drivers/i2c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 300f99f4539dd5caf7e19af5e4ea5eb259445913
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Mar 30 18:58:39 2009 +0200
+
+ s3c24x0: move serial driver to drivers/serial
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 942ba9969b9efa25f816c238861ecb339c54ed73
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Mar 30 18:58:39 2009 +0200
+
+ davinci: move i2c driver to drivers/i2c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ee4f3e2765a1c65c9861c5d2cf2e6feb84b90bd8
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Mar 30 18:58:39 2009 +0200
+
+ davinci: move nand driver to drivers/mtd/nand
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d3e55d0774a180c1837bd7ddec464015e883bd86
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Mar 30 18:58:38 2009 +0200
+
+ imx: move serial driver to drivers/serial
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2344bb8de2354101a8264c2123303c9d8d2aed3c
+Author: Detlev Zundel <dzu@denx.de>
+Date: Mon Mar 30 00:31:36 2009 +0200
+
+ inka4x0: Use proper accessor macros for memory mapped registers.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit e979e85fd39b06436922bb4d6bb5fafcbc775182
+Author: Detlev Zundel <dzu@denx.de>
+Date: Mon Mar 30 00:31:35 2009 +0200
+
+ inka4x0: Add hardware diagnosis and RTC in configuration.
+
+ This patch adds the board specific communication routines needed by
+ the external 4543 RTC.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+ Signed-off-by: Andreas Pfefferle <ap@denx.de>
+
+commit 7b5611cdd12ca0cc33f994f0d4a4454788fc3124
+Author: Detlev Zundel <dzu@denx.de>
+Date: Mon Mar 30 00:31:34 2009 +0200
+
+ inka4x0: Add hardware diagnosis functions for inka4x0
+
+ This patch adds advanced diagnosis functions for the inka4x0 board.
+
+ Signed-off-by: Andreas Pfefferle <ap@denx.de>
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 04e11cf383ff6231535fd981023bb1306b2133d4
+Author: Detlev Zundel <dzu@denx.de>
+Date: Mon Mar 30 00:31:33 2009 +0200
+
+ rtc: add support for 4543 RTC (manufactured by e.g. EPSON)
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+ Signed-off-by: Andreas Pfefferle <ap@denx.de>
+
+commit 572e6179adb5447ff42ec2aa5cf3a26decf97583
+Author: Detlev Zundel <dzu@denx.de>
+Date: Mon Mar 30 00:31:32 2009 +0200
+
+ drivers/twserial: Add protocol driver for "three wire serial" interface.
+
+ This pretty unintelligent interface is used on some RTC chips.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit a6ef3ddeafbe8007af3662cc4509b897c53ab395
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 29 23:01:42 2009 +0200
+
+ arm720t/clps7111: move serial driver to drivers/serial
+
+ add CONFIG_CLPS7111_SERIAL to activate the driver
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6790c55704531eb98f76b51d50e0f73d19fa2988
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 29 23:01:42 2009 +0200
+
+ lpc2292: move serial driver to drivers/serial
+
+ add CONFIG_LPC2292_SERIAL to activate the driver
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 176a600d0ecdaccbac483d2ba992d0119f853119
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 29 23:01:42 2009 +0200
+
+ ks8695: move serial driver to drivers/serial
+
+ add CONFIG_KS8695_SERIAL to activate the driver
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6d27bca15d445fcf07d6e7e30ced95c945c875ea
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 29 23:01:42 2009 +0200
+
+ s3c64xx: move usb driver to drivers/usb
+
+ add CONFIG_USB_S3C64XX to activate the driver
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ecfa8dda2f55e1fbe12dee0b5cc16e7d484674c9
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 29 23:01:41 2009 +0200
+
+ imx31: move serial driver to drivers/serial
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9ea91c9fefb3920d735533a7798c1a44a3ed3ffc
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 29 23:01:41 2009 +0200
+
+ netarm: move serial driver to drivers/serial
+
+ add CONFIG_NETARM_SERIAL to activate the driver
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 412ab705888742add435dd6ffc2e8bda14962235
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 29 23:01:41 2009 +0200
+
+ sa1100: move serial driver to drivers/serial
+
+ add CONFIG_SA1100_SERIAL to activate the driver
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit b2368754a9202225fd072e159fb78da7d2cdb623
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 29 23:01:41 2009 +0200
+
+ s3c44b0: extract cache from cpu.c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 40fd626223eae5363719bcb9a6896f08ceeee90a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 29 23:01:41 2009 +0200
+
+ s3c44b0: move serial driver to drivers/serial
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 5fe1377cc46199fe71c47be4b1aa81440ae96f9f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 29 23:01:40 2009 +0200
+
+ s3c44b0: move rtc driver to drivers/rtc
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 50f601cca8985615f9e3de4c34887448ade8a64b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 29 23:01:40 2009 +0200
+
+ s3c44b0: move i2c driver to drivers/i2c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 281dfb0c0c531194f99e60d6285cca4e2a9fb1b6
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 29 23:01:36 2009 +0200
+
+ s3c4510b: move specific code to soc directory
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 04531f3c11c693dc54924f82c41979d960309c9d
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Wed Mar 25 23:43:58 2009 +0100
+
+ NetStar: add RTC support
+
+ Add RTC support.
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+
+commit 71f7bd305d9768bcb7ddbe4b5823cbf3b3597b11
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Wed Mar 25 23:43:50 2009 +0100
+
+ NetStar: use generic flash driver
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+
+commit 3f464b0fc009d41d2734c08e472eb6d445f73a5c
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Mon Mar 16 23:31:20 2009 +0100
+
+ NetStar: update crcit utility
+
+ Make crc32 function to match its prototype. Use more meaningful identifiers.
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+
+commit 488f5d8790c451fc527fe5d2ef218f2a5e40ea17
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Mon Mar 23 17:46:27 2009 +0100
+
+ Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+
+commit 88685b5f62274167ad2ba8a58e108d89ff71955b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 29 00:58:16 2009 +0100
+
+ VCMA9: fix compile errors
+
+ Fix these:
+ cmd_vcma9.c:82: warning: implicit declaration of function 'eth_getenv_enetaddr'
+ cmd_vcma9.c:89: error: 'enetaddr' undeclared (first use in this function)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 26e42cbd786241fec370a0b92ad591f4e9cc423b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 29 00:54:21 2009 +0100
+
+ ARM: fix warning: 'print_eth' defined but not used
+
+ This warning got issued for all ARM systems that don't have
+ CONFIG_CMD_NET enabled.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit fd88d91a639ce41b825c8d50dc2182050e98fe53
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Mon Mar 23 18:16:34 2009 +0100
+
+ cs8900 compile fix
+
+ cs8900.c: In function 'eth_init':
+ cs8900.c:164: warning: passing argument 2 of 'eth_getenv_enetaddr' from incompatible pointer type
+ cs8900.c:165: error: invalid operands to binary <<
+ cs8900.c:166: error: invalid operands to binary <<
+ cs8900.c:167: error: invalid operands to binary <<
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d2567be915036720693f3ddd00c39b5b4d86fb8d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Mar 28 20:16:16 2009 +0100
+
+ Fix implicit declaration of function 'eth_[gs]etenv_enetaddr'
+
+ ...and some other compile warnings.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 97b05d7d524a6b4f195f07b8f90e98561a85596c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Mar 28 16:17:29 2009 +0100
+
+ mpc8xx/ether.c: fix warning: unused variable 'bd'
+
+ Also minor coding style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2dce551e10728f9e5655279f761f1d3cc0a8fe90
+Author: Detlev Zundel <dzu@denx.de>
+Date: Wed Mar 25 17:27:52 2009 +0100
+
+ command.c: Expose the core of do_help as _do_help to the rest of u-boot.
+
+ Other commands implementing subcommands can reuse this code nicely.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+ Signed-off-by: Andreas Pfefferle <ap@denx.de>
+
+commit 4e325fbfa4dea04eceb6392e00807c40d214dc6f
+Author: Detlev Zundel <dzu@denx.de>
+Date: Tue Mar 24 18:02:33 2009 +0100
+
+ mpc5xxx: Add structure definition for several more register blocks.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 739b0e594677a0676577bc95db4495a5563fc7f8
+Author: Detlev Zundel <dzu@denx.de>
+Date: Fri Mar 27 15:03:55 2009 +0100
+
+ MAINTAINERS: Add entry for 'inka4x0' board.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit e55ecec45340755ef47cbbb13fb35ceed60eb115
+Author: Detlev Zundel <dzu@denx.de>
+Date: Fri Mar 27 15:03:54 2009 +0100
+
+ MAINTAINERS: Keep list sorted.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 0baeca4b09b703728f8e66b52418039fd8f8ce35
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Mar 26 11:17:41 2009 -0400
+
+ karef/metrobox/xpedite1k: fix eth_setenv_enetaddr typos
+
+ The function is called "eth_setenv_enetaddr", not "eth_putenv_enetaddr".
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit 76756e41cde0a617e781a604cc47dfaef63697cd
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Mar 26 07:33:59 2009 +0100
+
+ ppc: cleanup compiler errors/warnings
+
+ Current u-boot top of tree builds with warnings/errors for
+ the following boards:
+
+ ads5121 cpci5200 mecp5200 v38b IAD210 MBX MBX860T NX823
+ RPXClassic debris PN62
+
+ following patch solves this.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Acked-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 3edf68c47fdd52f19c1e840771c19ba90cf5ced1
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Mar 26 16:14:13 2009 +0100
+
+ ppc4xx: Sequoia: Fix TLB reassignment in NAND booting code
+
+ This patch fixes a bug in the Sequoia TLB init code to reconfigure
+ the correct TLB (boot space) after running from RAM. This bug was
+ introduced with patch 4d332dbeb08f5863d1ea69d91a00c5499d3a87ed
+ [ppc4xx: Make Sequoia boot vxWorks] which changed the order of the
+ TLB in the Sequoia init.S file.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e2b66fe453a3679f807b37fc5923d89214302764
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Mar 26 10:00:57 2009 +0100
+
+ ads5121: enable instruction cache
+
+ Enabling the instruction cache significantly accelerates U-Boot
+ operations like CRC checking, image uncompression, etc.
+
+ Kudos to Andrea Scian for pointing out.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 33e88c557b29c84c52039ba05993fa70fe62afe3
+Author: Jon Smirl <jonsmirl@gmail.com>
+Date: Sun Mar 22 22:55:45 2009 -0400
+
+ mpc5200: suppress printf until console initialized
+
+ On boards which have the environment in eeprom, i2c_init() is called
+ before the console and RAM are initialized.
+ Suppress printfs until the console is initialized.
+
+ Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
+ Acked-by: Heiko Schocher <hs@denx.de>
+
+commit 0c6926736effbb9a19047949b7e9b3e8feab7c46
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Wed Mar 25 11:36:50 2009 +0100
+
+ ARM: Add the imx31_phycore_eet board to MAKEALL
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 917cfc70c18b74fa8a80189bdce8395199fa8360
+Author: Nishanth Menon <nm@ti.com>
+Date: Wed Mar 25 22:13:56 2009 +0100
+
+ OMAP3:Beagle: Enable mtdparts
+
+ http://www.denx.de/wiki/DULG/UBootCmdGroupFlash#UBootCmdFlMtdparts
+ provides a flexible way to create and maintain u-boot mtd
+ partitions. This allows commands such as "nand erase fs"
+ to work and the user no longer needs to decode the absolute
+ nand offsets. This patch enables this function for beagleboard
+
+ Signed-off-by: Nishanth Menon <nm@ti.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 4de1a5daab079ddc8ce1274144700203d692105c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Feb 22 16:26:35 2009 -0500
+
+ Blackfin: bf537-stamp: split post code out into dedicated post.c
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 5e8f245743ed14c89e495ba2c027703db9813160
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 22:51:56 2008 -0400
+
+ Blackfin: add support for S25FL128 parts
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit bf1e028bf3eab1d702fa0627cade4460688f3913
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 22:51:23 2008 -0400
+
+ Blackfin: overhaul SPI flash handling to speed things up
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit efcc08cededa2168b96f12a22a5872340880d334
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 22:51:05 2008 -0400
+
+ Blackfin: add support for SST SPI flashes
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 5b8cfbe63f7242ebb1008f30bbbc85a9d54b38cf
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 22:50:10 2008 -0400
+
+ Blackfin: add hack for crappy m25p80
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 6f5fd56f0832ea5c254e2e4be84ea21fc8ecd5c5
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Jan 21 20:47:12 2009 -0500
+
+ Blackfin: bf537-stamp: increase monitor size
+
+ The new jffs2 code pushed the code size just over the limit, so increase
+ the limit a bit more.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit f82caaccc87e1f76448ff42a6b930e59797e4f65
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Dec 8 16:16:11 2008 -0500
+
+ Blackfin: bf537-stamp: bump default SCLK up to 125MHz
+
+ Since all of the bf537-stamp and bf537-ezkit boards out there can handle it,
+ increase the speed of SCLK to 125MHz rather than 100MHz.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 751e54c3b77311b720b794813cce20546f288ada
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 22:44:14 2008 -0400
+
+ Blackfin: bf537-stamp: rewrite MAC-in-flash handling
+
+ Use the common net eth functions to setup the env/global data with the MAC
+ address, and properly handle the case where CONFIG_SYS_NO_FLASH is defined.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 88f9faffb383bbc6f23b8cc8519c5ffecfa2c8ad
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Dec 9 13:47:39 2008 -0500
+
+ Blackfin: add clkin_hz= to default kernel command line for ADI boards
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 9f64ba2412d3cede9eb1f290987e5c3a28df3232
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 23:49:13 2008 -0400
+
+ Blackfin: bf533-stamp: bump up default clocks
+
+ Since the hardware can handle it, bump the default clocks from 80mhz SCLK
+ and 398mhz CCLK to 100mhz SCLK and 498mhz CCLK.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 23fd959eeaaa0434ac7f9c1191de66c76d97d699
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 22:40:22 2008 -0400
+
+ Blackfin: bf533-stamp: rewrite startup LED notifications
+
+ Again, don't clobber pins that we aren't actually using, and use the common
+ LED framework rather than our own hob-job-but-not-really-working.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit cf6f469e2730fc8ab3523808b828be000d6eee77
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 1 09:09:48 2008 -0400
+
+ Blackfin: unify common ADI board settings
+
+ Rather than duplicate the same ADI settings in every ADI board, create a
+ common ADI config header and have all ADI boards start using that. This
+ will also make merging the ~10 boards I have to forward port a lot easier.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 196c74311f394c6eb08bd9ab07a35671299b9851
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Tue Mar 3 09:05:53 2009 +0900
+
+ Reduce OneNAND IPL common code
+
+ OneNAND IPL has common codes for RAM init, load data, and jump to 2nd
+ bootloader, but it's common code used about 300~400 bytes. So board
+ specific codes, such as lowlevel_init, can't has enough code. It make
+ a difficult to implement OneNAND IPL.
+
+ his patch make this common code as small as possible. and give
+ lowlevel_init can have more codes.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 16f2f5a351004129e79e79816697a367fd9e5446
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Wed Feb 11 18:38:24 2009 +0100
+
+ Add multi-chip NAND support for the TQM8548 modules
+
+ This patches configures the NAND UPM-FSL driver with multi-chip
+ support for the Micron MT29F8G08FAB NAND flash memory on the
+ TQM8548 modules.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 33846df28fa1f4cf96a96c18142d48d813caa892
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Wed Feb 11 18:38:23 2009 +0100
+
+ Add wait flags to support board/chip specific delays
+
+ The NAND flash on the TQM8548_BE modules requires a short delay after
+ running the UPM pattern like the MPC8360ERDK board does. The TQM8548_BE
+ requires a further short delay after writing out a buffer. Normally the
+ R/B pin should be checked, but it's not connected on the TQM8548_BE.
+ The corresponding Linux FSL UPM driver uses similar delay points at the
+ same locations. To manage these extra delays in a more general way, I
+ introduced the "wait_flags" field allowing the board-specific driver to
+ specify various types of extra delay.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 06e9f7df054d26d7f49c56bf9a6844b193ad6313
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Wed Feb 11 18:38:22 2009 +0100
+
+ Add support for TQM-specific chip select logic to FSL-UPM
+
+ For the NAND chips on the TQM8548 modules, a special chip-select logic is
+ used. It uses dedicated address lines to be set via UPM machine address
+ register (mar). This patch adds such support to the FSL-UPM driver.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit e93c1c169d49eda7babad9c781f541e2e34f0ff0
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Wed Feb 11 18:38:21 2009 +0100
+
+ Add multi chip support to the FSL-UPM driver
+
+ This patch adds support for multi-chip NAND devices to the FSL-UPM
+ driver. The "dev_ready" callback of the "struct fsl_upm_nand" is now
+ called with the argument "chip_nr" to allow testing the proper chip
+ select line. The NAND support of the MPC8360ERDK is updated as well.
+ No other boards are currently using the FSL UPM driver.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 672ed2aee91b4856f6671fc72cd34168d8f1b624
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Wed Feb 11 18:38:20 2009 +0100
+
+ Enable multi chip support in the NAND layer
+
+ This patch adds support for NAND_MAX_CHIPS to the MTD NAND layer.
+ Multi-chips devices are displayed as shown:
+
+ Device 0: 2x NAND 512MiB 3,3V 8-bit, sector size 128 KiB
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 74398b23f9c2ffdc137fd92910a46e3333fb93f9
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:58:33 2008 -0400
+
+ Blackfin: put memory into self-refresh before/after programming clocks
+
+ When initializing the core clocks, stick external memory into self-refresh.
+ This gains us a few cool things:
+ - support suspend-to-RAM with Linux
+ - reprogram clocks automatically when doing "go" on u-boot.bin in RAM
+ - make sure settings are stable before flashing new version
+ - finally fully unify initialize startup code path between LDR/non-LDR
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d347d572ab1f2d47bf257c9f7ca2e602038a136b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:56:08 2008 -0400
+
+ Blackfin: do not program voltage regulator on parts that do not have one
+
+ Some newer Blackfins (like the BF51x) do not have an on-chip voltage
+ regulator, so do not attempt to program the memory as if it does.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 0d4f24b70f7a979f58174f3eb271874950b551b6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 1 01:28:24 2008 -0400
+
+ Blackfin: setup a sane default EBIU_SDBCTL for SDRAM controllers
+
+ If the board config does not specify an explicit EBIU_SDBCTL value, set it
+ up with sane values based on other configuration options.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 3986e981f565c08f10c7e526af8cb518d741c349
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Dec 6 18:06:58 2008 -0500
+
+ Blackfin: handle reboot anomaly 432
+
+ Workaround anomaly 432:
+ The bfrom_SysControl() firmware function does not clear the SIC_IWR1
+ register before executing the PLL programming sequence. Therefore, any
+ interrupt enabled in the SIC_IWR1 register prior to the call to
+ bfrom_SysControl() can prematurely terminate the idle sequence required
+ for the PLL to relock properly. SIC_IWR0 is properly handled.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 7e1d212b6da492c6ea32c62af92e185284f41291
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 18 04:04:49 2008 -0400
+
+ Blackfin: kill off LDR jump block
+
+ The Boot ROM uses EVT1 as the entry point so set that rather than having
+ to use a tiny jump block in the default EVT1 location.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit a75fa148d60b1975403441e45565621bba50d2d9
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Jan 6 10:00:48 2009 -0500
+
+ Blackfin: simplify symbol_lookup() a bit
+
+ No need to skip a byte as the symbol table handles this.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 59f0978a7e78d20277ddbde7caf0ea877f3cfd98
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Feb 7 05:43:21 2009 -0500
+
+ Blackfin: fix SIC_RVECT definition: it is 16bits, not 32bits
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 58130f8920151d9e8942bbdf3388f2defb47e415
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Feb 7 05:41:17 2009 -0500
+
+ Blackfin: drop SPORT_TX read helper macros
+
+ The SPORT_TX registers cannot be read (the hardware will trigger an error),
+ so drop the read helper macros.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 820b076c449688bcd4af6db5a33ae424d1a60d0e
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Feb 7 05:25:35 2009 -0500
+
+ Blackfin: unify duplicate CPU port definitions
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 744fd240d181b0b05b1436e1b655c9a62526c752
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Feb 6 00:59:50 2009 -0500
+
+ Blackfin: drop now-unused CONFIG_SYS_BFIN_CMD_XXX
+
+ With the new CONFIG_XXX system and CONFIG_CMD_XXX handling, these defines
+ are no longer used/needed.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 45c48953e8a4038bd49c46813fcff5a207867ae4
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 04:01:26 2008 -0400
+
+ Blackfin: print out Flash: before checking it
+
+ If there is some problem in the flash init/checking code, it's nicer to see
+ the message "Flash:" before crashing. This way the source of the problem
+ is a bit more straightforward.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 1c7a79a04eb916f685f7275520b5eea6968a1559
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 15:33:09 2008 -0400
+
+ Blackfin: safely flush data caches when in writeback mode
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c06f2b13022703611bc3e512bd34f9014a46f448
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 13:21:48 2008 -0400
+
+ Blackfin: update lockbox api according to latest documentation
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2decc2a8d17a5397cb5956e46c8466c736e305a2
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:49:06 2008 -0400
+
+ Blackfin: mark bfin_reset static
+
+ The function is only used locally, so mark it static.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 974473caa732f63312687ef2bd2d22dad8e99b9a
+Author: Sonic Zhang <Sonic.Zhang@analog.com>
+Date: Fri Mar 20 19:28:20 2009 -0400
+
+ Blackfin: spi: there is no PORTJ_FER MMR on BF537
+
+ Since the PORTJ on the BF537 is peripheral-only (no GPIO functionality),
+ then there is no PORTJ_FER register for us to worry about.
+
+ Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit e82b762f293debc53c5afa90f37264f6b07520f9
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Mar 17 13:58:23 2009 -0400
+
+ Blackfin: fix jtag console tstc
+
+ The jtag tstc operation was checking the hardware to see if data is
+ available from it (which is fine for the jtag getc operation), but the
+ higher layers need to know whether any data is available. Since we have
+ to read up to 4 bytes at a time from the hardware, the higher layers need
+ to know they can consume the cached bytes as well.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit bc683f58b1f1d8d20546fe019483967a51a49df1
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Feb 22 16:23:41 2009 -0500
+
+ Blackfin: bf537-stamp: move CONFIG_POST handling to COBJS-$(...)
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8996d1608acb8f59fcb186dc7ed7d87f8fee1297
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Feb 22 16:02:27 2009 -0500
+
+ Blackfin: unify net-related init code
+
+ Unify all of the net-related init code in the common Blackfin board init
+ code to clean up the ifdef mess a bit.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c6ea30e52ea82af4858d2b6f99e0fd2ea276d657
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 18 12:51:48 2009 -0500
+
+ Blackfin: fix SWRST/SYSCR register sizes
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit a9d6777d39154978b9ef9c682b2627a3480b194c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 18 12:51:31 2009 -0500
+
+ Blackfin: update anomaly lists
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 4d7c32dad2e787f890ebcd51bfb723a126913c90
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Mar 19 18:31:38 2009 +0100
+
+ avr32: fix cacheflush.h location introducted by d8f2aa3298610b
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 3a3baf3ee61e6b28af3b49ebabc9ab4f6015aa48
+Author: Eric Schumann <E.Schumann@phytec.de>
+Date: Sat Mar 21 09:59:34 2009 -0400
+
+ Make flash protection work, when the environment is in EEPROM
+
+ On the pcm030 the environment is located in the onboard EEPROM. But we want
+ to handle flash sector protection in a safe manner. So we must read the
+ unlock environment variable from EEPROM instead from flash.
+
+ This patch is required as long the evironment is saved into the EEPROM.
+
+ Stefan: Additional change as suggested by Wolfgang, use bigger char array
+ (instead of 4).
+
+ Signed-off-by: Eric Schumann <E.Schumann@phytec.de>
+ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+ Acked-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit de3ce8c59f48f99779d7d7379a5432ded12ec06c
+Author: Jon Smirl <jonsmirl@gmail.com>
+Date: Sat Mar 21 11:17:56 2009 -0400
+
+ Add define for mpc5200 CDM_CLK_ENA
+
+ Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
+
+commit df486b1fa3f750b153eac7daa0b3bf1f594e5098
+Author: Nicolas Ferre <nicolas.ferre@atmel.com>
+Date: Sun Mar 22 14:48:16 2009 +0100
+
+ at91: Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC.
+
+ AT91sam9g20 is an evolution of the at91sam9260 with a faster clock speed.
+
+ The AT91SAM9G20-EK board is an updated revision of the AT91SAM9260-EK board.
+ It is essentially the same, with a few minor differences.
+
+ Here is the chip page on Atmel website:
+ http://www.atmel.com/dyn/products/product_card.asp?part_id=4337
+
+ Signed-off-by: Justin Waters <justin.waters@timesys.com>
+ Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 118d168035cc93f586da4812c89cb153eb9f4243
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 22 14:28:14 2009 +0100
+
+ cmc_pu2: fix implicit declaration of function 'eth_setenv_enetaddr'
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 176c4a982c6531f96426afaa1126cf9a5e2d5e03
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 22 14:28:13 2009 +0100
+
+ cmc_pu2: fix misc_init_r prototype
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 53158aea995221706b42c7bad9f717b31ae20414
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Jan 11 03:32:01 2009 +0100
+
+ at91sam9xeek: fix soc name
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 74c076d6c33d6d42ab065541a38383587879e7b7
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 22 10:22:34 2009 +0100
+
+ at91sam9/at91cap: move nand drivers to drivers/mtd/nand
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 163966087d62680547f188a93c61d01c8155254e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Mar 21 21:08:01 2009 +0100
+
+ atmel/at91/boards: compile dataflash partition only when dataflash is
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e2c0476f958f8e0b269a1118f4ba4a5cd475aa56
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Mar 21 21:08:00 2009 +0100
+
+ at91sam9/at91cap: move common macb initialisation to cpu
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f3f91f886bc8927fd692ac411b7423a87ffec532
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Mar 21 21:08:00 2009 +0100
+
+ at91sam9/at91cap: move common usb host initialisation to cpu
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit a484b00b86e72ac6da6ee4fce13dbc6b256672fe
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Mar 21 21:08:00 2009 +0100
+
+ at91sam9/at91cap: move common led management to cpu
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7ebafb7ec1a0285af8380623c009576f92583b98
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Mar 21 21:07:59 2009 +0100
+
+ at91sam9/at91cap: move common spi initialisation to cpu
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1332a2a0694c8e10a5bade397cf83645b2c3fd7e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Mar 21 21:07:59 2009 +0100
+
+ at91sam9/at91cap: move common serial initialisation to cpu
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e60beb13cf0135dc71c541021487b5ccc4d269cb
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Mar 21 22:04:41 2009 +0100
+
+ Prepare 2009.03
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9e78dae2b276c5bf9ab92cd85173f6cb92b1b7d5
+Author: Vivek Kutal <vivek.kutal@azingo.com>
+Date: Mon Feb 23 21:35:11 2009 +0530
+
+ Replaced endpoint numbers with appropriate macros in usbtty.c.
+
+ Signed-off-by: Vivek Kutal <vivek.kutal@azingo.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit faac4fd852e39cb1d7a740801b060e41aeacef1f
+Author: Michael Lawnick <ml.lawnick@gmx.de>
+Date: Thu Mar 19 10:06:41 2009 +0100
+
+ UBIFS: Missing offset relocation for compressor 'none'
+
+ On systems where U-Boot is linked to another address than it really lays
+ (e.g. backup image), calls via function pointers must be fixed with a
+ '+= gd->reloc_off'.
+ This was not done for none_compr in ubifs_compressors_init() what leads
+ to system crash on ubifsmount command.
+
+ Signed-off-by: Michael Lawnick <ml.lawnick@gmx.de>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit ce6d0c8de031f345bde745f3b855082adf1c4e45
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Mar 19 15:35:50 2009 +0100
+
+ UBIFS: Add UBIFS commands
+
+ This patchset adds these UBIFS related commands:
+
+ - ubifsmount
+ Mount an UBIFS volume
+
+ - ubifsls
+ List a directory of the mounted UBIFS volume
+
+ - ubifsload
+ Load a file from the mounted UBIFS volume to memory
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9eefe2a2b37a838558e3d213a9f5519503d0c180
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Mar 19 15:35:05 2009 +0100
+
+ UBIFS: Implement read-only UBIFS support in U-Boot
+
+ The U-Boot UBIFS implementation is largely a direct copy from the current
+ Linux version (2.6.29-rc6). As already done in the UBI version we have an
+ "abstraction layer" to redefine or remove some OS calls (e.g. mutex_lock()
+ ...). This makes it possible to use the original Linux code with very
+ little changes. And by this we can better update to later Linux versions.
+
+ I removed some of the Linux features that are not used in the U-Boot
+ version (e.g. garbage-collection, write support).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ CC: Artem Bityutskiy <dedekind@infradead.org>
+ CC: Adrian Hunter <ext-Adrian.Hunter@nokia.com>
+
+commit b1b4e89a0f3b75854c39a62cae41bad56d210adf
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Mar 19 15:34:56 2009 +0100
+
+ Add LZO decompressor support
+
+ This patch adds LZO decompression support to U-Boot. It is needed for
+ the upcoming UBIFS support, since UBIFS uses LZO as default compressor/
+ decompressor. Since we only support read-only in UBIFS, only the
+ decompressor is needed.
+
+ All this is copied with minor changes from the current Linux kernel
+ version (2.6.28-rc8).
+
+ This patch only implements this LZO decompressor support for PPC.
+ Other platforms using UBIFS will have to add the required
+ "include/asm/unaligned.h" as well. It should be fairly easy to copy this
+ from the Linux source tree as I have done it for PPC in this patch.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 68d7d65100e84df00bca971c114092731b441090
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Mar 19 13:30:36 2009 +0100
+
+ Separate mtdparts command from jffs2
+
+ Currently the mtdparts commands are included in the jffs2 command support.
+ This doesn't make sense anymore since other commands (e.g. UBI) use this
+ infrastructure as well now. This patch separates the mtdparts commands from
+ the jffs2 commands making it possible to only select mtdparts when no JFFS2
+ support is needed.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 02a301cd5087eaffdf456e0a5cec1100c4d9a398
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Feb 25 12:11:15 2009 +0100
+
+ powerpc: Only use eth_getenv_enetaddr() if networking is enabled
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5c4fa9b474af95d60f019ec6369cbe77b9dab4b5
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Tue Mar 17 10:06:40 2009 +0100
+
+ Add support for the digsy MTC board.
+
+ This is the InterControl custom device based on the MPC5200B chip.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit ff7dc067369e30066744f096995aef7d97574d15
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Feb 23 16:52:36 2009 +0100
+
+ powerpc: Fix compilation warning in board.c
+
+ Fix this warning:
+
+ board.c: In function 'board_init_r':
+ board.c:653: warning: unused variable 'i'
+ board.c:651: warning: unused variable 'e'
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9cd690160d3ce1a7fb4ceeee6c99cedb1ac1d49c
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Feb 23 16:42:51 2009 +0100
+
+ ppc4xx: Don't write the MAC address into the internal SoC registers
+
+ Remove this code. It's not needed. The 4xx EMAC driver stores the MAC
+ addresses into the SoC registers instead.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit bb57ad4be76d0e2e7f9ec56678235cc9872ff40f
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Feb 20 10:19:19 2009 +0100
+
+ ppc4xx: Use correct io accessors for esd 405/440 boards
+
+ This patch replaces in/out8/16/32 macros by in/out_8/_be16/_be32
+ macros. Also volatile pointer references are replaced by the
+ new accessors.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 049216f045fd8e0f45bcef121c2bb1c7d3de6988
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Feb 20 10:19:18 2009 +0100
+
+ ppc4xx: Use correct io accessors for esd 405 boards
+
+ This patch replaces in/out8/16/32 macros by in/out_8/_be16/_be32
+ macros. Also volatile pointer references are replaced by the
+ new accessors.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a59205d1519375d027f97a545ad642ab20fce6f8
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Feb 20 10:19:17 2009 +0100
+
+ ppc4xx: Cleanup linker scripts of esd 4xx boards
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2f103ee284e68934a648732db5e0b6ceb4a1ed8f
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Feb 20 10:19:16 2009 +0100
+
+ ppc4xx: Update TEXT_BASE for DASA_SIM boards
+
+ Fix building DASA_SIM boards by increasing U-Boot's size in flash.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 09db8f4de6805f1dde510c167f20e56a5405d29e
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Feb 20 10:19:15 2009 +0100
+
+ ppc4xx: DU405 maintenance fix
+
+ -strip unused features
+ -fix resetting phy
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 75511b47ac2647be48218dbb93af05b21f404f67
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Feb 20 10:19:14 2009 +0100
+
+ ppc4xx: Abort autoboot only by space key on CPCI405 boards
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e17ee157ca9ff0d4cc5841d06c4b70c1603df29c
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Tue Feb 24 21:14:56 2009 +1100
+
+ Add basic relocation to i386 port
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit 8c63d47651f77d9fb887cad433370b866eb0a193
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Tue Feb 24 21:14:45 2009 +1100
+
+ Implement SC520 timers
+
+ Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
+
+commit 6d7f610b09f813b1239eedcbfe921cfd439aea25
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Tue Feb 24 21:14:32 2009 +1100
+
+ Factor out SC520 sub-features
+
+ Moved sub-features of the SC520 code which is currently selectively compiled
+ using #ifdef out of sc520.c into individual files selectively compiled via
+ the makefile
+
+ Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
+
+commit abf0cd3dff227cfb6e82ad13be62e28e6e89d5df
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Tue Feb 24 21:13:40 2009 +1100
+
+ Rewrite i386 interrupt handling
+
+ Rewrite interrupt handling functionality for the i386 port. Separated
+ functionality into separate CPU and Architecture components.
+
+ It appears as if the i386 interrupt handler functionality was intended
+ to allow multiple handlers to be installed for a given interrupt.
+ Unfortunately, this functionality was not fully implemented and also
+ had the problem that irq_free_handler() does not allow the passing
+ of the handler function pointer and therefore could never be used to
+ free specific handlers that had been installed for a given IRQ.
+
+ There were also various issues with array bounds not being fully
+ tested.
+
+ I had two objectives in mind for the new implementation:
+
+ 1) Keep the implementation as similar as possible to existing
+ implementations. To that end, I have used the leon2/3
+ implementations as the reference
+
+ 2) Seperate CPU and Architecture specific elements. All specific i386
+ interrupt functionality is now in cpu/i386/ with the high level
+ API and architecture specific code in lib_i386. Functionality
+ specific to the PC/AT architecture (i.e. cascaded i8259 PICs) has
+ been further split out into an individual file to allow for the
+ implementation of the PIC architecture of the SC520 CPU (supports
+ more IRQs)
+
+ Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
+
+commit ece444b42b71eb5bce34a24ec584573b3c8c4a98
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Tue Feb 24 21:12:35 2009 +1100
+
+ Move ali512x.h
+
+ Moved ali512x.h from include/asm-i386/ic/ to /include
+
+ Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
+
+commit 6d83e3ac61dcdbcb7f04664309a9689fe01c5704
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Tue Feb 24 21:12:20 2009 +1100
+
+ Rename SC520 Configuration Options
+
+ Options are now all uniformly CONFIG_SYS_SC520_<option>
+
+ Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
+
+commit f62fb99941c625605aa16a0097b396a5c16d2c88
+Author: Trent Piepho <xyzzy@speakeasy.org>
+Date: Wed Feb 18 15:22:05 2009 -0800
+
+ Fix all linker script to handle all rodata sections
+
+ A recent gcc added a new unaligned rodata section called '.rodata.str1.1',
+ which needs to be added the the linker script. Instead of just adding this
+ one section, we use a wildcard ".rodata*" to get all rodata linker section
+ gcc has now and might add in the future.
+
+ However, '*(.rodata*)' by itself will result in sub-optimal section
+ ordering. The sections will be sorted by object file, which causes extra
+ padding between the unaligned rodata.str.1.1 of one object file and the
+ aligned rodata of the next object file. This is easy to fix by using the
+ SORT_BY_ALIGNMENT command.
+
+ This patch has not be tested one most of the boards modified. Some boards
+ have a linker script that looks something like this:
+
+ *(.text)
+ . = ALIGN(16);
+ *(.rodata)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+
+ I change this to:
+
+ *(.text)
+ . = ALIGN(16);
+ *(.eh_frame)
+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+
+ This means the start of rodata will no longer be 16 bytes aligned.
+ However, the boundary between text and rodata/eh_frame is still aligned to
+ 16 bytes, which is what I think the real purpose of the ALIGN call is.
+
+ Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
+
+commit 566b652c7cdb0e5e0529bb3d1eaffbd2bf45a032
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 18:26:08 2009 -0500
+
+ remove bi_enet*addr from global data for all arches
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+ CC: Daniel Hellstrom <daniel@gaisler.com>
+ CC: Michal Simek <monstr@seznam.cz>
+ CC: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+ CC: Scott McNutt <smcnutt@psyent.com>
+ CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit eb85aa594c1b57a1e3be9689b65171a137a36432
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 20:07:19 2009 -0500
+
+ ppc: mark global bi_enet*addr as legacy
+
+ The environment is the canonical storage location of the mac address, so
+ we're killing off the global data location and moving everything to
+ querying the env directly.
+
+ In the ppc case, these things are part of the legacy ABI, so keep them
+ around but mark them as legacy so no new code will touch them.
+
+ Also stop calling load_sernum_ethaddr() since all boards now implement
+ this as a stub.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit 9c150102bc1de375d36d97a1cc2dd0e9639b15df
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 20:09:52 2009 -0500
+
+ boards: get mac address from env and move load_sernum_ethaddr() to board init
+
+ The environment is the canonical storage location of the mac address, so
+ we're killing off the global data location and moving everything to
+ querying the env directly.
+
+ Rather than have common ppc code call a board-specific function like
+ load_sernum_ethaddr(), have each board call it in its own board-specific
+ misc_init_r() function.
+
+ The boards that get converted here are:
+ - kup4k/kup4x
+ - pcs440ep
+ - tqm8xx
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+ CC: Stefan Roese <sr@denx.de>
+
+commit 92b50ffef978f05858a0ff4cbe88430bc51a28a2
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 19:55:01 2009 -0500
+
+ cmc_pu2: get mac address from environment
+
+ The environment is the canonical storage location of the mac address, so
+ we're killing off the global data location and moving everything to
+ querying the env directly.
+
+ Also rename load_sernum_ethaddr() to misc_init_r() so we don't need to
+ handle this board specially in common ARM code.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit d8d21e699d7fcfb6ab11635110266dd09b7edc62
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 16 18:03:14 2009 -0500
+
+ boards: move board_get_enetaddr() into board-specific init
+
+ The environment is the canonical storage location of the mac address, so
+ we're killing off the global data location and moving everything to
+ querying the env directly.
+
+ Rather than have the common ppc code have board-specific hooks, move the
+ board_get_enetaddr() function into the board-specific init functions.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit f11e6ff5b1859d9213f0d501b3309e065f487543
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 19:39:55 2009 -0500
+
+ arm: get mac address from environment
+
+ The environment is the canonical storage location of the mac address, so
+ we're killing off the global data location and moving everything to
+ querying the env directly.
+
+ Some warts are remaining and should be killed off (by moving the func to
+ the appropriate board init code):
+ - davinci_eth_set_mac_addr
+ - cs8900_get_enetaddr
+ - smc_set_mac_addr
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit 0107cf66f7346e8c7d6cf0fe99d2f265134afd59
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 19:36:20 2009 -0500
+
+ nx823: get mac address from environment
+
+ The environment is the canonical storage location of the mac address, so
+ we're killing off the global data location and moving everything to
+ querying the env directly.
+
+ For the nx823, the serial number is moved out of load_sernum_ethaddr() and
+ into misc_init_r() as is the env setup. This lets us kill off the former
+ function in the process.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit 19b5b533ccd522abeb501d510750693c35e20456
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 18:27:18 2009 -0500
+
+ lib_*/board.c: do not initialize bi_enet*addr in global data
+
+ Since everyone is using the environment for mac address storage, there is
+ no point in seeding the global data.
+
+ The arches that are converted here:
+ i386
+ m68k
+ microblaze
+ mips
+ nios
+ nios2
+ sh
+ sparc
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+ CC: Daniel Hellstrom <daniel@gaisler.com>
+ CC: Michal Simek <monstr@seznam.cz>
+ CC: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+ CC: Scott McNutt <smcnutt@psyent.com>
+ CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 740e8ba7d475c49c1b76058e1bf354e376b5c4e0
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 19:19:54 2009 -0500
+
+ npe: get mac address from environment
+
+ The environment is the canonical storage location of the mac address, so
+ we're killing off the global data location and moving everything to
+ querying the env directly.
+
+ The resulting code can also be simplified even further.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Stefan Roese <sr@denx.de>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit 6bacfa6a8e9b264d37c1262fc1f3e948d1feab81
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 19:18:41 2009 -0500
+
+ cpu/: get mac address from environment
+
+ The environment is the canonical storage location of the mac address, so
+ we're killing off the global data location and moving everything to
+ querying the env directly.
+
+ The cpus that get converted here:
+ at91rm9200
+ mpc512x
+ mpc5xxx
+ mpc8260
+ mpc8xx
+ ppc4xx
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+ CC: John Rigby <jrigby@freescale.com>
+ CC: Stefan Roese <sr@denx.de>
+
+commit 03f3d8d3b39cf85c0ce7ca903b436701e8aa610b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 19:09:54 2009 -0500
+
+ lan91c96/smc91111/smc911x: get mac address from environment
+
+ The environment is the canonical storage location of the mac address, so
+ we're killing off the global data location and moving everything to
+ querying the env directly.
+
+ Also, do not bother checking the EEPROM if the env is setup. This
+ simplifies the code greatly.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Wolfgang Dnek <wd@denx.de>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+ CC: Rolf Offermanns <rof@sysgo.de>
+ CC: Erik Stahlman <erik@vt.edu>
+ CC: Daris A Nevil <dnevil@snmc.com>
+ CC: Sascha Hauer <s.hauer@pengutronix.de>
+
+commit c527ce92511cbf723c2ca77bee1cf9ecf83dac81
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 19:14:09 2009 -0500
+
+ sh_eth: get mac address from environment
+
+ The environment is the canonical storage location of the mac address, so
+ we're killing off the global data location and moving everything to
+ querying the env directly.
+
+ The sh_eth driver can also be simplified a bit by using enetaddr member of
+ the eth_device structure.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ CC: Carlos Munoz <carlos@kenati.com>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit 0a5238cea90665c230297a8fd77bb0b3b61ca177
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 19:06:09 2009 -0500
+
+ cs8900: get mac address from environment
+
+ The environment is the canonical storage location of the mac address, so
+ we're killing off the global data location and moving everything to
+ querying the env directly.
+
+ The cs8900 driver also changes slightly in that the hardware is not
+ consulted if the mac address in the env is sane.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Marius Groeger <mgroeger@sysgo.de>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit c4b8762f11d337e6a9d90c227b2871d65d372469
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 19:04:25 2009 -0500
+
+ bcm570x: get mac address from environment
+
+ The environment is the canonical storage location of the mac address, so
+ we're killing off the global data location and moving everything to
+ querying the env directly.
+
+ Since the address is in the PLM_DEVICE_BLOCK structure already, there is
+ no need to pass the NodeAddress as a second parameter. So drop the second
+ argument to the LM_SetMacAddress() function (and update the tigon3 driver
+ accordingly).
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit d3f871482f06f6a4eaf4a3fafde84846bad87b4f
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 19:01:26 2009 -0500
+
+ drivers/net/: get mac address from environment
+
+ The environment is the canonical storage location of the mac address, so
+ we're killing off the global data location and moving everything to
+ querying the env directly.
+
+ The drivers that get converted here:
+ 3c589
+ 4xx_enet
+ dc2114x
+ dm9000x
+ enc28j60
+ fsl_mcdmafec
+ ks8695eth
+ mcffec
+ rtl8019
+ rtl8169
+ s3c4510b_eth
+ xilinx_emac
+ xilinx_emaclite
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+ CC: Rolf Offermanns <rof@sysgo.de>
+ CC: Stefan Roese <sr@denx.de>
+ CC: Sascha Hauer <saschahauer@web.de>
+ CC: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ CC: Greg Ungerer <greg.ungerer@opengear.com>
+ CC: Xue Ligong <lgxue@hotmail.com>
+ CC: Masami Komiya <mkomiya@sonare.it>
+ CC: Curt Brune <curt@cucy.com>
+ CC: Michal SIMEK <monstr@monstr.eu>
+
+commit b6b4625d175019e387e5b0f65a17322a78f6bb90
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 18:38:38 2009 -0500
+
+ boards: get mac address from environment
+
+ The boards that get converted here to use the environment for the mac
+ address rather than global data:
+ debris
+ mgcoge
+ mgsuvd
+ muas3001
+ netstal
+ pn62
+ sixnet
+ vcma9
+ xilinx (the ones that use xilinx_enet)
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+ CC: Sangmoon Kim <dogoil@etinsys.com>
+ CC: Heiko Schocher <hs@denx.de>
+ CC: David Mueller <d.mueller@elsoft.ch>
+ CC: Niklaus Giger <niklaus.giger@netstal.com>
+ CC: Wolfgang Grandegger <wg@denx.de>
+ CC: Dave Ellis <DGE@sixnetio.com>
+ CC: Ricardo Ribalda <ricardo.ribalda@uam.es>
+
+commit 06a0c4381a65ed500c816a05b9ae7b207c3b1d4b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 18:36:45 2009 -0500
+
+ AmigaOneG3SE/enet: get mac address from environment
+
+ Always use the MAC address that is stored in the environment first before
+ falling back to the ROM. This also cuts out any comparison steps: if the
+ mac in the env is sane, the ROM is never consulted.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Thomas Frieden <ThomasF@hyperion-entertainment.com>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit 56b555a644f3cbb1b3929cb52b61d3ce483885f5
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 18:52:38 2009 -0500
+
+ nvedit: do not update global bi_enetaddr and do not call eth_set_enetaddr()
+
+ Since the ethernet layer handles updating of device addresses itself from
+ the environment, there is no point in calling eth_set_enetaddr().
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit 5013533467c1de731c2f0c9beb4b41ce3f07cbeb
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 18:54:07 2009 -0500
+
+ lynxkdi: get mac address from environment
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit 62c93d92f1b6266b2f33c5f403931b51cbd2a246
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 18:51:43 2009 -0500
+
+ bootvx: get mac address from environment
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Niklaus Giger <niklaus.giger@member.fsf.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit de2dff6ff89f98c6062f4d224fd434a3ede035d1
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 18:50:10 2009 -0500
+
+ bdinfo: get mac address from environment
+
+ Add a new print_eth() function to automate the eth*addr env var acquisition
+ and display. Affects all arches.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ CC: Scott McNutt <smcnutt@psyent.com>
+ CC: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+ CC: Michal Simek <monstr@seznam.cz>
+ CC: Daniel Hellstrom <daniel@gaisler.com>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit 95823ca0773356860e622ee3304a4b7cafcbf19a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 18:23:48 2009 -0500
+
+ net: get mac address from environment and use eth util funcs
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit 500b6c51e4c41f4562cb48344af98deb7e342731
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 13 15:06:25 2008 -0400
+
+ Blackfin: bfin_mac: force boards to setup the MAC themselves
+
+ Since the on-chip MAC does not have an eeprom or similar interface, force
+ all Blackfin boards that use this driver to setup the board data with a
+ proper MAC.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit 6ff4137f2ad640e4fc8ea1b0455161ddff1f6730
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 14:12:34 2009 -0500
+
+ doc/README.enetaddr: document proper MAC usage
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3f6e6993e92fd0658da1746d1c84644612ee520b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Jan 29 19:43:44 2009 -0500
+
+ net: new utility functions for working with enetaddr's
+
+ Declare new utility functions for converting between the environment
+ variables (eth*addr) and the binary MAC address representation. This way
+ we can unify all the random places that already do this kind of thing.
+
+ The functions in question:
+ eth_parse_enetaddr - "..." -> {...}
+ eth_getenv_enetaddr - env -> {...}
+ eth_setenv_enetaddr - {...} -> env
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit b6446b67758ea1e41223f0782924bb73fd0a89d0
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Feb 17 00:00:53 2009 -0500
+
+ convert print_IPaddr() to %pI4
+
+ Now that our printf functions support the %pI4 modifier like the kernel,
+ let's drop the inflexible print_IPaddr() function and covert over to the
+ %pI4 modifier.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit 6c6166f52983dac775e3852f9d0f49d033f27108
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 16 23:21:36 2009 -0500
+
+ vsprintf: pull updates from Linux kernel
+
+ This brings in support for the %p modifier which allows us to easily print
+ out things like ip addresses, mac addresses, and pointers.
+
+ It also converts the rarely used 'q' length modifier to the common 'L'
+ modifier when dealing with quad types.
+
+ While this new code is a bit larger (~1k .text), most of it should be made
+ up by converting the existing ip/mac address code to use format modifiers.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit a43ea5cc6d612471fbc74f0a26b2bea5864aa1d6
+Author: Jon Smirl <jonsmirl@gmail.com>
+Date: Thu Mar 19 23:04:18 2009 -0400
+
+ .gitignore for generated files in api_examples directory
+
+ Add .gitignore for generated files in api_examples directory
+
+ Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 40281a9ca21a6b6d7b996b4d4eeaa19026337231
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Wed Mar 18 12:27:04 2009 +0900
+
+ net: sh_eth: Remove sh_eth_reset() from halt function
+
+ sh_eth_reset is function to reset Ether IP.
+ The MAC address is stored in IP, but it is initialized by this function.
+ OS (e.g. Linux Kernel) can not use this device when initialized.
+ This revises this problem.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+
+commit f8853d105da7d69bc92a5b4578f9b85234e558ec
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Fri Mar 20 12:45:50 2009 +0100
+
+ ppc4xx: Fix bug in PCI outbound map configuration for canyonlands
+
+ PCI outbound address map configuration doesn't match the
+ PCI memory address range covered by appropriate TLB entry
+ configuration for canyonlands causing machine check
+ exceptions while accessing PCI memory regions. This patch
+ provides a fix for this issue.
+
+ Kazuaki Ichinohe observed and reported this issue while
+ testing display output with PCI ATI video card on canyonlands.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7a88601a34132548c3c591ea87ab3468b51121b0
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Fri Mar 6 10:09:37 2009 -0500
+
+ CFI: geometry reversal for STMicro M29W320DT
+
+ Follow up to the flash_fixup_stm to fix geometry reversal
+ on STMicro M29W320ET flash chip. The M29W320DT has 4 erase region.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 069f4364d807d7fdea3de7385ad2f8d83c587aec
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 25 17:29:40 2009 -0500
+
+ smc911x_eeprom: update register API
+
+ The smc911x driver changed the naming convention for its register funcs,
+ so update the eeprom code accordingly.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit 6a397ef0e6c58caab8bf427d447714bc9b3bb9d4
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Tue Mar 17 10:06:39 2009 +0100
+
+ mpc52xx: Get rid of board-specific #ifdef's in cpu/mpc5xxx/ide.c
+
+ Total5200 and digsy MTC use I2C port 2 pins as a ATA chip select.
+ To avoid adding board-specific ifdefs to cpu/mpc5xxx/ide.c new
+ define CONFIG_SYS_ATA_CS_ON_I2C2 was introduced. It is used by
+ Total5200 and will be used by digsy MTC and other boards with
+ ATA CS on I2C pins.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit 1b6275dfb173bd2edb8f208dd050d6f47ae39654
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Mar 12 07:37:34 2009 +0100
+
+ 8xx: add support for new keymile kmsupx4 board.
+
+ This patch adds support for the kmsupx4 board from Keymile,
+ based on a Freescale MPC852T CPU
+
+ - serial console on SMC1
+ - 32 MB SDRAM
+ - 32 MB NOR Flash
+ - Ethernet over SCC3
+ - I2C Bitbang
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit d044954fe2a7e7a3dd104eb9c9d2104e38da2911
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Mar 12 07:37:28 2009 +0100
+
+ 8xx, mgsuvd: rename board to a more generic name
+
+ renaming the "mgsuvd" board port into "km8xx", because
+ there come more similar boards from keymile.
+ Compiling the mgsuvd board with "make mgsuvd_config"
+ remains.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 18b2f35bde1672e074a3d5048383cb56fda745cb
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Mar 12 07:37:23 2009 +0100
+
+ 8xx, mgsuvd: Coding Style cleanup config file
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 364123db6730d32330f818b65360d2cd27396667
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Mar 12 07:37:18 2009 +0100
+
+ powerpc: common updates for keymile boards
+
+ - added to keymile-common.h:
+ - bootcount support
+ - COMMAND HISTORY
+ - CONFIG_AUTO_COMPLETE
+ - CONFIG_SYS_FLASH_PROTECTION
+ - JFFS2 support
+ - CONFIG_VERSION_VARIABLE
+ - extracted common I2C settings for all boards
+ - common default environment settings summarized
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 506f391888b82d1b83bdd749c3cea9eb2fd64df8
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Mar 12 07:37:15 2009 +0100
+
+ 8xx, icache: enabling ICache not before running from RAM
+
+ with the new CONFIG_SYS_DELAYED_ICACHE config option, ICache
+ is not enabled before code runs from RAM.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit cabf7b9c83bd780a5805ddbb4c0ce431d5b9f9f3
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Mar 12 07:37:11 2009 +0100
+
+ 82xx, mgcoge: fix environment sector size
+
+ Size of one environment sector is 0x20000.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 27057d416c7cc9eb1860953da8836352c07f13e9
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Mon Mar 16 23:27:31 2009 +0100
+
+ NetStar: config reindentation
+
+ Fix indentation broken by symbol renames. "Sort" driver related definitons.
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+
+commit 8d8235f84d3ef3f29b7d14e741369b5824b5bb4a
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Mar 17 11:21:43 2009 +0000
+
+ ColdFire: Fix incorrect definition
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 9017d9325a5067b2ab0d70a2d3c907620c9ab7f8
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Mar 2 19:16:45 2009 +0000
+
+ ColdFire: Fix M5329EVB and M5373EVB nand issue
+
+ The Nand flash was unable to read and write properly
+ due to Nand Chip Select (nCE) setup was in reverse
+ order. Also, increase the Nand time out value to 60.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 42b68af1062f75bb4a91cf47e329a7e8100cd815
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Jan 27 15:19:35 2009 +0000
+
+ ColdFire: PLATFORM_CPPFLAGS updates for new compiler
+
+ Update PLATFORM_CPPFLAGS to accept 4.3.x version of
+ ColdFire compiler.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit d6e4baf49987fc6f75e8574c0c27301a828b3132
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Jan 27 12:57:47 2009 +0000
+
+ ColdFire: Provide gzip image size V2 & V3 platforms
+
+ Default gzip bootm size is 8MB. Some platforms require
+ more than 8MB
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit c3a9e6374210679a81f611c1bcf968988bc20e41
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Feb 18 11:49:31 2009 +0000
+
+ ColdFire: Fix M54451 serial boot dram setup
+
+ The serial boot dram extended/standard mode register was not
+ setup and was using default DRAM setup causing the U-boot was
+ unstable to boot up in serial mode.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 32d11d58159a575f08a982cad8a5a941ffe5cc3d
+Author: arun c <arun.edarath@gmail.com>
+Date: Thu Dec 4 15:57:15 2008 +0530
+
+ Coldfire: XL Bus minor fixes
+
+ According to coldfire manual data timeout > address time out
+ also use correct macro to program XARB_CFG
+
+ Signed-off-by: Arun C <arunedarath@mistralsolutions.com>
+
+commit 65d8bc94d8214812ccdf3372d3fef845cf4ec2e5
+Author: Scott Wood <scottwood@freescale.com>
+Date: Tue Mar 17 12:06:04 2009 -0500
+
+ NAND: Have nboot accept .e and .i as legacy no-ops.
+
+ This was intended to happen before, but a trivial bug prevented it.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 0987505540918b2464b73069af3a5b766dbd3ceb
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Fri Mar 13 14:38:19 2009 +0100
+
+ NAND: Make nboot skip bad blocks
+
+ nboot command currently does not skip bad blocks and gives read error when
+ loading image stored over bad block. With patch applied, nboot works as
+ expected:
+
+ Device 0 bad blocks:
+ 00780000
+ 014a0000
+ 02000000
+ 02cc0000
+ 04aa0000
+
+ Loading from NAND 128MiB 3,3V 8-bit, offset 0x2c00000
+ Image Name: Linux-2.6.22-omap1
+ Created: 2008-11-20 23:44:32 UTC
+ Image Type: ARM Linux Kernel Image (uncompressed)
+ Data Size: 1052520 Bytes = 1 MB
+ Load Address: 10008000
+ Entry Point: 10008000
+ Skipping bad block 0x02cc0000
+ Automatic boot of image at addr 0x10400000 ...
+ ...
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 0b2f38fe3c4555dd2b81c69880403c13ad723153
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Mar 12 07:27:25 2009 +0100
+
+ ppc4xx: lwmon5: Only use one CS (rank) in DDR2 configuration
+
+ This patch fixes a problem spotted by Mikhail Zolotaryov on Sequoia with
+ the DDR2 configuration to only use one CS (rank). As this code is most
+ likely copied from the original Sequoia version, this error was copied
+ as well.
+
+ This patch also removes some dead code.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9199b9cc8f56aca26504b48cf702176208f46e54
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Mar 12 07:24:40 2009 +0100
+
+ ppc4xx: PMC440: Only use one CS (rank) in DDR2 configuration
+
+ This patch fixes a problem spotted by Mikhail Zolotaryov on Sequoia with
+ the DDR2 configuration to only use one CS (rank). As this code is most
+ likely copied from the original Sequoia version, this error was copied
+ as well.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ee86fd15e1ccda4be41f1dba82b8c9efea9a3145
+Author: Mikhail Zolotaryov <lebon@lebon.org.ua>
+Date: Wed Mar 11 10:54:46 2009 +0200
+
+ Fix AMCC Sequoia board DDR memory configuration
+
+ Sequoia board schematics (DES0211_11_SCH_11.pdf, page 5, unit U1D)
+ specifies that BankSel#1 is not connected, while bootloader memory
+ configuration is (board/amcc/sequoia/sdram.c):
+ mtsdram(DDR0_10, 0x00000300);
+ i.e. both Chip Selects used - not correct.
+
+ If we change to correct value here:
+ mtsdram(DDR0_10, 0x00000100);
+ memory is accessible OK also.
+
+ Signed-off-by: Mikhail Zolotaryov <lebon@lebon.org.ua>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b3dd629e78870ba2dc9f8032978721c0fa02a856
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 15 22:40:09 2009 +0100
+
+ Prepare 2009.03-rc2
+
+ Update CHANEGLOG, fix minor coding style issue.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 394d30dd1ee23b80fd5e59e17ebe0feca927ab31
+Author: Jerry Van Baren <gvb.uboot@gmail.com>
+Date: Fri Mar 13 11:40:10 2009 -0400
+
+ mpc83xx: Add bank configuration to FSL spd_sdram.c
+
+ The routine assumed 4 bank SDRAMs, enhance to configure for 4 or 8
+ bank SDRAMs.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+ Acked-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit b581626c1e2474a3dadf69d4f0e0582eccbc4235
+Author: Norbert van Bolhuis <nvbolhuis@aimvalley.nl>
+Date: Fri Mar 13 08:58:14 2009 +0100
+
+ mpc83xx: correctly set encryption and I2C bus 0 clock
+
+ This patch makes sure the correct mask is applied when setting
+ the encryption and I2C bus 0 clock in SCCR.
+ Failing to do so may lead to ENCCM being 0 in which case I2C bus 0
+ won't function.
+
+ Signed-off-by: Norbert van Bolhuis <nvbolhuis@aimvalley.nl>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit e6a6a704151c2d7e4a7b485545b48a6020ccca17
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Thu Mar 12 19:30:50 2009 +0100
+
+ OMAP3: Add support for OMAP3 die ID
+
+ Read and store OMAP3 die ID in U-Boot environment.
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit f949bd8d089ec3059c460ac829c0d919e1d7af0e
+Author: Jon Smirl <jonsmirl@gmail.com>
+Date: Wed Mar 11 15:08:56 2009 -0400
+
+ MPC5200 FEC MII speed register
+
+ Set a non-zero speed in the MII register so that MII commands will work.
+
+ Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
+
+commit 94a353611b93ac4cb4434a5f7e98aa0902da919e
+Author: Yusuke.Goda <goda.yusuke@renesas.com>
+Date: Fri Mar 13 16:08:18 2009 +0900
+
+ sh: ap325rxa: Change the wait cycle in the area 5
+
+ Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 2db0e1278b9f11263e0a13326b57d4f99781f7ac
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Wed Feb 25 16:04:26 2009 +0900
+
+ sh: Fix cannot work rtl8139 on r2dplus
+
+ The rtl8139 driver use pci_mem_to_phys. So it need PCI system memory
+ registration.
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 64f3c0b8ba99d6651db59273e497ab5e857c8d4f
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Fri Feb 27 18:35:41 2009 +0900
+
+ sh: Add netdev header fixing of warning/build
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit ada9318252f51c2626e9837c623f9812b0308dea
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Tue Mar 3 15:11:17 2009 +0900
+
+ sh: Add support 32-Bit Extended Address Mode to sh7785lcr
+
+ We can built 'make sh7785lcr_32bit_config'. And add new command "pmb"
+ for this mode. This command changes PMB for using 512MB system memory.
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 06b18163b57e6b0349b0c299222d50e7b1e41e50
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Wed Feb 25 14:26:42 2009 +0900
+
+ sh: Add some register value configurable to PCI of SH7780
+
+ Some register value was hardcoded for System memory size 128MB and
+ memory offset 0x08000000. This patch fixed the problem.
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 06e2735eb85cbea7cecb3c308d6d078b3651b22c
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Wed Feb 25 14:26:52 2009 +0900
+
+ sh: Add system memory registration to PCI for SH4
+
+ It is necessary for some pci device driver.
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit b3061b40db691245a7bb9a55354b4edacbf3902d
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Wed Feb 25 14:26:55 2009 +0900
+
+ sh: Add value for PCI system memory registration of sh7785lcr
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6d84ae3956a6cd7aebd86f661130752594e60124
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Tue Mar 3 15:11:08 2009 +0900
+
+ sh: Add macros for SH-4A 32-Bit Address Extended Mode
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 3e3eec39de8fe0ae62e6e4d4e3fa4442ee9ed6b1
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Feb 3 13:35:05 2009 +0900
+
+ sh: use write{8,16,32} in ms7720se lowlevel_init
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 0452352df118bc9dd684a056aaaa5fb4aed1178a
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Mon Mar 9 18:07:53 2009 -0500
+
+ tsec: report when there is no vendor specific PHY support
+
+ Commit af1c2b84 added a generic phy support, with an ID of zero
+ and a 32 bit mask; meaning that it will match on any PHY ID.
+
+ The problem is that there is a test that checked if a matching
+ PHY was found, and if not, it printed the non-matching ID.
+ But since there will always be a match (on the generic PHY,
+ worst case), this test will never trip.
+
+ In the case of a misconfigured PHY address, or of a PHY that
+ isn't explicitly supported outside of the generic support,
+ you will never see the ID of 0xffffffff, or the ID of the
+ real (but unsupported) chip. It will silently fall through
+ onto the generic support.
+
+ This change makes that test useful again, and ensures that
+ the selection of generic PHY support doesn't happen without
+ some sort of notice. It also makes it explicitly clear that
+ the generic PHY must be last in the PHY table.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit c279dfc10186ceba78d3862036f158750e86599a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Mar 9 10:53:05 2009 +0100
+
+ SIMPC8313 board: fix out of tree building.
+
+ Fix typo in makefile which broke out of tree builds.
+
+ Also use expolicit "rm" instead of "ln -sf" which is known to be
+ unreliable.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 49b5aff491bd574935ecaf8545152066a25eff3d
+Author: ksi@koi8.net <ksi@koi8.net>
+Date: Mon Feb 23 10:53:13 2009 -0800
+
+ Add eTSEC 1/2 IO override control (corrected)
+
+ This adds tsec12ioovcr to include/asm-ppc/immap_85xx.h (was reserved.)
+
+ Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
+
+commit 48c2b7bb432da84fcce05b4db6efad0be73a93dc
+Author: Andy Fleming <afleming@freescale.com>
+Date: Fri Mar 6 19:05:52 2009 -0600
+
+ fsl: Remove unnecessary debug printfs
+
+ These were left in accidentally, and are not really useful unless the
+ code is as broken as it was when it was being developed.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 0ee84b88b78bce425190d8cd7adf4c30cba0c2f0
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Tue Feb 24 02:37:59 2009 -0600
+
+ Fix mpc85xx ddr-gen3 ddr_sdram_cfg.
+
+ Commit e1be0d25, "32bit BUg fix for DDR2 on 8572" prevented other
+ sdram_cfg bits (such as ecc and self_refresh_in_sleep) from being set.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit a922fdb87af25c25c032424908dcf60fbf3250ea
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Feb 24 06:13:10 2009 +0100
+
+ PXA: timer use do_div and simplify it
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 4b00d1aa82b6af9b4e628a5729a12086e44558b3
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Mar 9 10:51:39 2009 +0100
+
+ SIMPC8313 board: fix out of tree building.
+
+ Fix typo in makefile which broke out of tree builds.
+
+ Also use expolicit "rm" instead of "ln -sf" which is known to be
+ unreliable.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f70fd13e2fe4cf58e251271c27f9c06e141d7f9a
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Feb 24 11:30:51 2009 +0100
+
+ 8360, kmeter1: added bootcount feature.
+
+ add CONFIG_BOOTCOUNT_LIMIT feature for 8360 CPU.
+
+ The bootcounter uses 8 bytes from the muram,
+ because no other memory was found on this
+ CPU for the bootcount feature. So we must
+ correct the muram size in DTS before booting
+ Linux.
+
+ This feature is actual only implemented for
+ MPC8360, because not all 83xx CPU have qe,
+ and therefore no muram, which this feature
+ uses.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 1e7ed2565031e01abc18c713030a0a9829c07684
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Feb 24 11:30:48 2009 +0100
+
+ 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1
+
+ old code implemented the QE_ENET10 errata only for Silicon
+ Revision 2.0. New code reads now the Silicon Revision
+ register and sets dependend on the Silicon Revision the
+ values as advised in the QE_ENET10 errata.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 605f78e34a3f0103693b891f2573edd352e7d495
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Feb 24 11:30:44 2009 +0100
+
+ 83xx, kmeter1: updates for 2009.03
+
+ - HRCW update
+ HRCWH_BOOTSEQ_DISABLE not HRCWH_BOOTSEQ_NORMAL
+ HRCWH_LALE_EARLY added
+ - DDR-SDRAM settings modified. This solves sporadically
+ problems with this memory.
+ - CS1 now 128 MB window size
+ - CS3 now 512 MB window size
+ - PRAM activated
+ - MTDPARTS_DEFAULT defined
+ - CONFIG_HOSTNAME added
+ - MONITOR_LEN now 384 KB
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 118cbe3c35c898f8d020b29d6dc180307cacf147
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Feb 24 11:30:40 2009 +0100
+
+ 83xx, kmeter1: autodetect size of DDR II RAM
+
+ it is possible that some board variants have different DDR II
+ RAM sizes. So we autodetect the size of the assembled RAM.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit c1bce4fff750d734b1fa7467eb08f93902c97ca6
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Feb 24 11:30:37 2009 +0100
+
+ 83xx, i2c: add mux support for fsl_i2c
+
+ This patch adds I2C mux support for the fsl_i2c driver. This
+ allows you to add "new" i2c busses, which are reached over
+ i2c muxes. For more infos, please look in the README and
+ search for CONFIG_I2C_MUX.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 19f0e93041dbfe22f8d39b98e4f7f9ea87b77803
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Feb 24 11:30:34 2009 +0100
+
+ 83xx, kmeter1: add I2C, dtt, eeprom support
+
+ This patch adds I2C support for the Keymile kmeter1 board.
+ It uses the First I2C Controller from the CPU, for
+ accessing 4 temperature sensors, an eeprom with IVM data
+ and the booteeprom over a pca9547 mux.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit db1d72afd77287bc8577210f3f71ab249dcf146f
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Feb 24 11:30:30 2009 +0100
+
+ i2c, dtt: move dtt_init () to board_init_r ()
+
+ In case where a board not uses CONFIG_POST, it is not
+ necessary to init the DTTs when running from flash.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 5b0055547f0246908b79cc300170d87380b69e18
+Author: Dave Liu <daveliu@freescale.com>
+Date: Wed Feb 25 12:31:32 2009 +0800
+
+ 83xx: Fix some bugs in spd sdram code
+
+ 1. RD_TO_PRE missed to add the AL, and need min 2 clocks for
+ tRTP according to DDR2 JEDEC spec.
+ 2. WRTORD - tWTR need min 2 clocks according to DDR2 JEDEC spec.
+ 3. add the support of DDR2-533,667,800 DIMMs
+ 4. cpo
+ 5. make the AL to min to gain better performance.
+
+ The Micron MT9HTF6472CHY-667D1 DIMMs test passed on
+ MPC837xEMDS platform at 266MHz/333MHz/400MHz data rate.
+
+ items 1, 2 and 5:
+ Acked-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+
+ Reported-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit b7be63abec45858c044f0fbd6aeef524c4663f9b
+Author: Valeriy Glushkov <gvv@lstec.com>
+Date: Wed Feb 4 18:27:49 2009 +0200
+
+ MPC8349ITX: several config issues fixed
+
+ The previous version rebooted forever with DDR bigger than 256MB.
+ Access the DS1339 RTC chip is on I2C1 bus.
+ Allow DHCP.
+
+ Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 7e2ec1de1d2d723b59d7dd2fb85ff71b952d63af
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Feb 19 18:20:39 2009 +0300
+
+ mpc83xx: MPC837XEMDS: Initialize SerDes before negating PCIE reset signal
+
+ The SerDes initialization should be finished before negating the reset
+ signal according to the reference manual. This isn't an issue on real
+ hardware, but we'd better stick to the specifications anyway.
+
+ Suggested-by: Liu Dave <DaveLiu@freescale.com>
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 9c2d63ec0e9520948b6d598ea32e9aa4e0de847f
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Feb 25 12:28:32 2009 +0100
+
+ i2c, dtt: move dtt_init () to board_init_r ()
+
+ it is not necessary to init the DTTs so early,
+ so move this init to board_init_r ().
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 00cc5595a7caac8066b408774383a956c2e26797
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Wed Feb 25 20:28:13 2009 +0100
+
+ lcd: Fix compilation warning in common/lcd.c
+
+ Fix following warning while compilation for mcc200 board:
+
+ lcd.c: In function 'lcd_display_bitmap':
+ lcd.c:625: warning: unused variable 'cmap'
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit f5a77a09c93fe7f04c0c56f64ea436f7d318d674
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Tue Feb 24 21:11:24 2009 +1100
+
+ Moved SC520 Files (fix commit 407976185e0dda2c90e89027121a1071b9c77bfb)
+
+ Fixes commit 407976185e0dda2c90e89027121a1071b9c77bfb
+
+ Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
+
+commit 75ba6d693b8f6247aa4b81323a2ee2fa28222215
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 23 10:29:47 2009 -0500
+
+ smc911x: split out useful defines/functions into local header
+
+ The smc911x driver has a lot of useful defines/functions which can be used
+ by pieces of code (such as example eeprom programmers). Rather than
+ forcing each place to duplicate these defines/functions, split them out
+ of the smdc911x driver into a local header.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+ CC: Sascha Hauer <s.hauer@pengutronix.de>
+ CC: Guennadi Liakhovetski <lg@denx.de>
+ CC: Magnus Lilja <lilja.magnus@gmail.com>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit a2bb7105a79af8f2ffa9f87256fce6c1cbcbd8e1
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Tue Feb 24 10:44:02 2009 +0100
+
+ ARM: add an "eet" variant of the imx31_phycore board
+
+ The "eet" variant of the imx31_phycore board has an OLED display, using a
+ s6e63d6 display controller on the first SPI interface, using GPIO57 as a
+ chip-select for it. With this configuration you can display 256 colour BMP
+ images in 16-bit RGB (RGB565) LCD mode.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0c99f6ab31c5635874ba7a2e8d37791bfbf02f8f
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Fri Feb 6 10:37:57 2009 +0100
+
+ video: add an i.MX31 framebuffer driver
+
+ Add a driver for the Synchronous Display Controller and the Display
+ Interface on i.MX31, using IPU for DMA channel setup. So far only
+ displaying of bitmaps is supported, no text output.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Acked-by: Anatolij Gustschin <agust@denx.de>
+
+commit b245e65ee3c4cce3ccf008a21f4528239655876c
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Fri Feb 6 10:37:53 2009 +0100
+
+ LCD: support 8bpp BMPs on 16bpp displays
+
+ This patch also simplifies some ifdefs in lcd.c, introduces a generic
+ vidinfo_t, which new drivers are encouraged to use and old drivers to switch
+ over to.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Acked-by: Anatolij Gustschin <agust@denx.de>
+
+commit a303dfb0e9a93e516ea9427b5c09543d5f74ade1
+Author: Mark Jackson <mpfj@mimc.co.uk>
+Date: Fri Feb 6 10:37:49 2009 +0100
+
+ Add 16bpp BMP support
+
+ This patch adds 16bpp BMP support to the common lcd code.
+
+ Use CONFIG_BMP_16BPP and set LCD_BPP to LCD_COLOR16 to enable the code.
+
+ At the moment it's only been tested on the MIMC200 AVR32 board, but extending
+ this to other platforms should be a simple task !!
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Acked-by: Anatolij Gustschin <agust@denx.de>
+
+commit 689551c5ff1b394b88412f3df22144e79468d3a9
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Fri Feb 6 10:37:41 2009 +0100
+
+ A driver for the S6E63D6 SPI display controller from Samsung
+
+ This is a driver for the S6E63D6 SPI OLED display controller from Samsung.
+ It only provides access to controller's registers so the client can freely
+ configure it.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Acked-by: Anatolij Gustschin <agust@denx.de>
+
+commit fc7a93c84f3f134484811a0d9ad751fbc1a7da6d
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Fri Feb 13 09:26:40 2009 +0100
+
+ i.MX31: support GPIO as a chip-select in the mxc_spi driver
+
+ Some SPI devices have special requirements on chip-select handling.
+ With this patch we can use a GPIO as a chip-select and strictly follow
+ the SPI_XFER_BEGIN and SPI_XFER_END flags.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit b30de3cccf8867566cd314e7c7033904afa5dc9d
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Sat Feb 7 01:18:07 2009 +0100
+
+ i.MX31: add a simple gpio driver
+
+ This is a minimal driver, so far only managing output. It will
+ be used by the mxc_spi.c driver.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f9b6a1575d9f1ca192e4cb60e547aa66f08baa3f
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Sat Feb 7 00:09:12 2009 +0100
+
+ i.MX31: fix SPI driver for shorter than 32 bit
+
+ Fix setting the SPI Control register, 8 and 16-bit transfers
+ and a wrong pointer in the free routine in the mxc_spi driver.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7e91558032a0c1932dd7f4f562f9c7cc55efc496
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Feb 19 18:20:52 2009 +0300
+
+ mpc83xx: MPC837XERDB: Add PCIe support
+
+ On MPC8377E-RDB and MPC8378E-RDB boards we have PCIe and mini-PCIe
+ slots. Let's support them.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 50a4d08e8f31debbd4ea12caf1265f3643c38d5b
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Feb 19 18:20:50 2009 +0300
+
+ mpc83xx: PCI: Fix hard-coded first_busno value
+
+ We should use pci_last_busno() in pci_init_bus(), otherwise we'll
+ erroneously re-use PCI0's first_busno for PCI1 hoses.
+
+ NOTE: The patch is untested. All MPC83xx FSL boards I have have
+ PCI1 in miniPCI form, for which I don't have any cards handy.
+
+ But looking in cpu/mpc85xx/pci.c:
+ ...
+ #ifdef CONFIG_MPC85XX_PCI2
+ hose = &pci_hose[1];
+
+ hose->first_busno = pci_hose[0].last_busno + 1;
+
+ And considering that we do the same for MPC83xx PCI-E support,
+ I think this patch is correct.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit a5878d427128c1a9226045ebe05fbadaa02eb9dd
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Feb 19 18:20:46 2009 +0300
+
+ mpc83xx: PCI: Fix bus-range fdt fixups for PCI1 controllers
+
+ This patch fixes copy-paste issue: pci_hose[0]'s first and last
+ busnos were used to fixup pci1's nodes.
+
+ We don't see this bug triggering only because Linux reenumerate
+ buses anyway.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit b24a99f6666ac278ec9f9c1334518af828833d19
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Feb 19 18:20:44 2009 +0300
+
+ mpc83xx: PCIe: Fix CONFIG_PCI_SCAN_SHOW reporting bogus values
+
+ This patch fixes an issue in config space read accessors: we should
+ fill-in the value even if we fail (e.g. skipping devices), otherwise
+ CONFIG_PCI_SCAN_SHOW reports bogus values during boot up.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit e2d72ba543c7b6924b5b5d393dcd80b2b9c3a022
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Feb 19 18:20:42 2009 +0300
+
+ mpc83xx: PCIe: Don't start bus enumeration at 0
+
+ Currently we assign first_busno = 0 for the first PCIe hose, but this
+ scheme won't work if we have ordinary PCI hose already registered (its
+ first_busno value is 0 too).
+
+ The old code worked fine only because we have PCI disabled on
+ MPC837XEMDS boards in stand-alone mode (see commit 00f7bbae92e3b13f2b3
+ "mpc83xx: fix PCI scan hang on the standalone MPC837xE-MDS boards").
+ But on MPC837XERDB boards we have PCI and PCIe, so the bug actually
+ triggers.
+
+ So, to fix the issue, we should use pci_last_busno() + 1 for the
+ first_busno (i.e. last available busno).
+
+ Reported-by: Huang Changming <Chang-Ming.Huang@freescale.com>
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit cc2a8c7751ddbae3116660064f446888538b93e9
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Feb 19 18:20:41 2009 +0300
+
+ PCI: Add pci_last_busno() helper
+
+ This is just a handy routine that reports last PCI busno: we walk
+ down all the hoses and return last hose's last_busno.
+
+ Will be used by PCI/PCIe initialization code.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit bd76729bcbfd64b5d016a9b936f058931fc06eaf
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Mon Feb 23 13:56:51 2009 -0600
+
+ MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default
+
+ Currently, we get 256MB as the default, but since all the 86xx
+ board configs define a 2G BAT mapping for RAM, raise default
+ to 2G.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 2331e18b9df0ab98ebf3ab44c0efea1311949aaa
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Thu Feb 12 10:43:32 2009 -0600
+
+ mpc8641hpcn: Indicate 36-bit addr map in boot messages
+
+ If 36-bit addressing is enabled, print a message on the console
+ when we boot.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit 58a518c3d8a2c7de11d414e8b903495daee7dc7e
+Author: Mark Jackson <mpfj-list@mimc.co.uk>
+Date: Fri Feb 13 15:48:18 2009 +0000
+
+ Setup extra MIMC200 chip selects
+
+ Added code to setup the extra Flash and FRAM chip selects as used on the
+ MIMC200 board.
+
+ V2 moves the init code from the common "cpu.c" file into the board specific
+ setup file.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 80534886a72a0088eef9e781a8e0b7d04ea41f36
+Author: Mark Jackson <mpfj@mimc.co.uk>
+Date: Mon Nov 24 12:10:56 2008 +0000
+
+ MIMC200: tidy GCLK init code
+
+ Change the MIMC200 startup code to use the built-in (rather than
+ hard-coded) funtions for setting up gclk outputs.
+
+ We'll also move the code to the new, more-appropriate
+ board_postclk_init() routine.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit b423f94063bf04e92047ff85c7e53441eb3b712b
+Author: Olav Morken <olavmrk@gmail.com>
+Date: Fri Jan 23 12:56:32 2009 +0100
+
+ AVR32: Must add NOPs after disabling interrupts for AT32UC3A0512ES
+
+ The AT32UC3A0512ES chip has a bug when disabling interrupts. As a
+ workaround, two NOPs can be inserted.
+
+ Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
+ Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
+ Signed-off-by: Olav Morken <olavmrk@gmail.com>
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit f5f652fa91aa69db8117d211af1b4fe09f2edd3b
+Author: Gunnar Rangoy <gunnar@rangoy.com>
+Date: Fri Jan 23 12:56:29 2009 +0100
+
+ AVR32: Make GPIO implmentation cpu dependent
+
+ There are some differences in the implementation of GPIO in the
+ at32uc chip compared to the ap700x series.
+
+ Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
+ Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
+ Signed-off-by: Olav Morken <olavmrk@gmail.com>
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit a38de083d2979db3680f0d0978c509a172c8fa00
+Author: Olav Morken <olavmrk@gmail.com>
+Date: Fri Jan 23 12:56:28 2009 +0100
+
+ AVR32: Move addrspace.h to arch-directory, and move some functions from io.h to addrspace.h
+
+ The AVR32A architecture (which AT32UC3A-series is based on) has a
+ different memory layout than the AVR32B-architecture. This patch moves
+ addrspace.h to an arch-dependent directory in preparation for
+ AT32UC3A-support. It also moves some address-space manipulation
+ functions from io.h to addrspace.h.
+
+ Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
+ Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
+ Signed-off-by: Olav Morken <olavmrk@gmail.com>
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit d8f2aa3298610b44127dbc4796d8038aa5847e0b
+Author: Olav Morken <olavmrk@gmail.com>
+Date: Fri Jan 23 12:56:27 2009 +0100
+
+ AVR32: Make cacheflush cpu-dependent
+
+ The AT32UC3A series of processors doesn't contain any cache, and issuing
+ cache control instructions on those will cause an exception. This commit
+ makes cacheflush.h arch-dependent in preparation for the AT32UC3A-support.
+
+ Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
+ Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
+ Signed-off-by: Olav Morken <olavmrk@gmail.com>
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 2f70c49e5b9813635ad73666aa30f304c7fdeda9
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Feb 10 09:38:52 2009 +0100
+
+ netloop: speed up NetLoop
+
+ NetLoop polls every cycle with getenv some environment variables.
+ This is horribly slow, especially when the environment is big.
+
+ This patch reads only the environment variables in NetLoop,
+ when they were changed.
+
+ Also moved the init part of the NetLoop function in a seperate
+ function.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit ad2d16393e9f684e4a9255f42e8bfdd819b67a87
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Dec 22 02:56:07 2008 -0500
+
+ smc911x_eeprom: new example app for managing newer SMC parts
+
+ A forward port of the last version to work with the newer smc911x driver.
+ I only have a board with a LAN9218 part on it, so that is the only one
+ I've tested. But there isn't anything in this that would make it terribly
+ chip specific afaik.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Sascha Hauer <s.hauer@pengutronix.de>
+ CC: Guennadi Liakhovetski <lg@denx.de>
+ CC: Magnus Lilja <lilja.magnus@gmail.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 736323a490b664ec0edc3ddb2c1c4a6824db45c6
+Author: Pieter Henning <phenning@vastech.co.za>
+Date: Sun Feb 22 23:17:15 2009 -0800
+
+ Added Vitesse VSC8211 definitions to TSEC driver
+
+ Added the struct containing PHY settings for the Vitesse VSC8211 phy to
+ the phy_info list in tsec.c
+
+ Signed-off-by: Pieter Henning <phenning@vastech.co.za>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 32688e572ff96715b41420e9a7f280db6c399b65
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Feb 23 00:22:21 2009 +0100
+
+ Update CHANGELOG; Prepare 2009.03-rc1
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 80b827c2b78329c6503b271e43d9eb693d644710
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Feb 22 23:45:40 2009 +0100
+
+ ARM: synchronize mach-types.h with linux v2.6.29-rc5-315-g683fdc5
+
+ The file was generated from building versatile_defconfig.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 14209ac13ff631e36c9a9dd426c59c2e2f5dab00
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sun Feb 22 14:24:11 2009 +0900
+
+ MIPS: Fix GCC-4.2 'discards qualifiers from pointer target type' warnings
+
+ Compiling dbau1x00 and gth2 boards with GCC-4.2, you would see new warnings
+ like this:
+
+ skuribay@ubuntu:u-boot.git$ ./MAKEALL dbau1000
+ Configuring for dbau1x00 board...
+ au1x00_eth.c: In function 'au1x00_send':
+ au1x00_eth.c:158: warning: passing argument 1 of 'virt_to_phys' discards qualifiers from pointer target type
+ au1x00_eth.c: In function 'au1x00_recv':
+ au1x00_eth.c:211: warning: passing argument 1 of 'virt_to_phys' discards qualifiers from pointer target type
+ au1x00_eth.c: In function 'au1x00_init':
+ au1x00_eth.c:252: warning: passing argument 1 of 'virt_to_phys' discards qualifiers from pointer target type
+ au1x00_eth.c: In function 'au1x00_recv':
+ au1x00_eth.c:211: warning: passing argument 1 of 'virt_to_phys' discards qualifiers from pointer target type
+ au1x00_eth.c: In function 'au1x00_init':
+ au1x00_eth.c:252: warning: passing argument 1 of 'virt_to_phys' discards qualifiers from pointer target type
+ au1x00_eth.c: In function 'au1x00_send':
+ au1x00_eth.c:158: warning: passing argument 1 of 'virt_to_phys' discards qualifiers from pointer target type
+
+ We're passing a volatile pointer to a function which is expecting a non-
+ volatile pointer. That's potentially dangerous, so gcc warns about it.
+ Confirmed with ELDK 4.2 (GCC 4.2.2) and Sourcey G++ 4.2 (GCC 4.2.3).
+
+ To fix this, we add a volatile attribute to the argument in question.
+ The virt_to_phys function in Linux kernel also does the same thing.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit aba45c85b22f8c57fc2fedba8e948e06c2e2f5b3
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Fri Feb 20 17:51:28 2009 +0100
+
+ OMAP3: Clean up MMC code
+
+ Clean up OMAP3 MMC code:
+
+ * Convert register access to struct & readx/writex style
+ * Replace hardcode values by macros
+ * Remove macro defined twice
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit cfcdf4a9b361d015c0debac73fbf7c511df4a934
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Thu Feb 12 18:55:43 2009 +0100
+
+ OMAP3: Pandora: Update pin mux
+
+ Clock pin must have input enabled for MMC3 to work.
+ Also enable pull-ups for cmd/data lines to be consistent
+ with remaining MMC host pin setup.
+
+ Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
+
+commit 6530a8bf8a0274b9419141e4c2c5a235cce5380f
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Thu Feb 12 18:55:42 2009 +0100
+
+ OMAP3: Add OMAP3 auto detection
+
+ This patch adds OMAP3 cpu type auto detection based on OMAP3 register
+ and removes hardcoded values.
+
+ Signed-off-by: Steve Sakoman <sakoman@gmail.com>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit f956fd0338f4990793a10f767929ba4963665261
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Thu Feb 12 18:55:41 2009 +0100
+
+ OMAP3: Beagle: Add board revision detection
+
+ With BeagleBoard revision C some HW changes are introduced (e.g. PinMUX)
+ which might need different software handling. For this, GPIO pin 171 (GPIO
+ module 6, offset 11) can be used to check for board revision. If this pin
+ is low, we have a rev C board. Else it must be a revision Ax or Bx board.
+
+ To handle board differences you can call function beagle_get_revision().
+ E.g.:
+
+ if (beagle_get_revision()) {
+
+ /* do special revision C stuff here */
+
+ }
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 288f3cd912918b97919d13b6f7fb13fbddf74d68
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Thu Feb 12 18:55:40 2009 +0100
+
+ OMAP3: Overo: Clean up pin mux and GPIO configuration
+
+ * Make Overo GPIO114 an input for touchscreen PENDOWN
+ * Make Overo GPIO144-147 readable
+ * Make Overo EHCI pinmux match beagle rev c setup
+ * Adjust pinmux for SMSC911X network chip support
+ * Remove unnecessary GPIO setup
+ * Fix merge error in Makefile
+
+ Signed-off-by: Steve Sakoman <sakoman@gmail.com>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 2579019b8248e5f166e60e37065766efc8a49dbc
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 22 17:08:41 2009 +0100
+
+ nmdk8815: fix onenand support
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0176c03a2469676df5bf19cf93a1a6f582f6a120
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 22 17:56:50 2009 +0100
+
+ nomadik/nand: fix 'ecc512' discards qualifiers from pointer target type
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9751a456f702ba2fcdfd1bdbc0138927ef007858
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 22 17:49:43 2009 +0100
+
+ davinci: fix implicit declaration of function 'davinci_errata_workarounds'
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 4f5728987f4f9f7845688482aa2b7f2127768165
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 22 15:49:28 2009 +0100
+
+ arm: add uart dcc support
+
+ Serial driver via the EmbeddedICE macrocell's DCC channel using
+ co-processor 14.
+
+ It does include a timeout to ensure that the system does not
+ totally freeze when there is nothing connected to read.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0cd18fa982f9a8c1a90ce971379a7d6408976d48
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Fri Nov 21 14:35:56 2008 -0500
+
+ ARM DaVinci: Add common peripherals and modules enable functions.
+
+ Taken all the duplicated code for enabling common modules and apply
+ software workarounds from the board specific code into common
+ functions. Also added comments explaining the workarounds
+ (from TI errata documents) and replaced some numerical bit numbers
+ with more meaningful defines.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit d3be1bcae7a8207e0a79ffd035d0e90f80378295
+Author: Alessandro Rubini <rubini@unipv.it>
+Date: Mon Feb 9 15:53:33 2009 +0100
+
+ Enable Ethernet for Nomadik 8815 Evaluation Kit
+
+ This trivially enables Ethernet support in the debug board
+ by setting up the proper chip select.
+
+ Signed-off-by: Alessandro Rubini <rubini@unipv.it>
+ Acked-by: Andrea Gallo <andrea.gallo@stnwireless.com>
+
+commit 0d8c6eab2481046e9446264bfe9402bb98ddf433
+Author: Alessandro Rubini <rubini@unipv.it>
+Date: Mon Feb 9 15:53:31 2009 +0100
+
+ Nand driver for Nomadik SoC
+
+ This driver implements the ECC algorithm described in
+ the CPU data sheet and uses the OOB layout chosen in
+ already-released development systems (shipped with a custom-made
+ u-boot 1.3.1).
+
+ Signed-off-by: Alessandro Rubini <rubini@unipv.it>
+ Acked-by: Andrea Gallo <andrea.gallo@stnwireless.com>
+
+commit ef339cc2b68e4cbef3f9376a45315e1b974bbd8d
+Author: Alessandro Rubini <rubini@unipv.it>
+Date: Mon Feb 9 15:53:31 2009 +0100
+
+ Added nomadik.h header
+
+ Signed-off-by: Alessandro Rubini <rubini@unipv.it>
+ Acked-by: Andrea Gallo <andrea.gallo@stnwireless.com>
+
+commit 60ece6d8043d1dd80f5dd32c541213716d624b19
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Wed Oct 29 20:05:18 2008 +0900
+
+ r8a66597-hcd: fix cannot use external hub
+
+ Fix the problem that cannot use external hub, because this driver
+ did not control correctly a DEVADDx register.
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit e1ffaee728190e76a4596a3579d94e730143585f
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Feb 19 01:20:27 2009 -0500
+
+ Blackfin: disable syscontrol code for now
+
+ Looks like the initcode updates fell out of order during my merges. The
+ patch that really fixes up this code is part of power-on overhaul and so
+ is too large for merging at this point. Instead, we can disable the code
+ as no currently in-tree board depends on it. The next merge window will
+ fix things up properly.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 1b228d68f54832edd867ef98520f760f68192ab7
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Feb 19 01:19:49 2009 -0500
+
+ Blackfin: bf537-stamp: fix I2C board defines
+
+ The previous merge for cleaning up the I2C driver incorrectly reverted the
+ CFG_xxx rename for some of the I2C defines.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 09fee8e8677a6265e89144ccc163bf00e321769e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Feb 22 01:19:52 2009 +0100
+
+ Coding Style cleanup; update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 1dcb50afbb63a439320a985380a0af2dca079d1e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Feb 22 01:17:47 2009 +0100
+
+ Makefile: fix cleanup
+
+ Commit e4943ec5 moved the ARM boards to a vendor directory but forgot
+ to adapt the cleanup rules in the Makefile
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit edff7bcc4d5540df8b416274652ff02e94c38b9e
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Fri Feb 20 13:01:56 2009 -0500
+
+ Cleanup the comment for m68k linux boot argument passing.
+
+ This patch clarifies the way m68k passes linux boot argument.
+ The one gotcha here is that the assembly instruction that
+ the compiler uses to jump to the kernel is 'jsr' which pushes the
+ program counter for the instruction after the jsr into the stack pointer.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4d41650eec959668280a612467bd95c7b8398513
+Author: Peter Griffin <pgriffin@mpc-data.co.uk>
+Date: Tue Feb 10 16:44:45 2009 +0000
+
+ sh: Fix rsk7203 in tree build
+
+ Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk>
+
+commit fca0cecff73db99d99ad094cca7980472b8a11b5
+Author: Minkyu Kang <mk7.kang@samsung.com>
+Date: Wed Feb 18 09:05:52 2009 +0900
+
+ bootm: Reduce the unnecessary memmove
+
+ Although load address and image start address are same address,
+ bootm command always does memmove.
+ That is unnecessary memmove and can be taken few milliseconds
+ (about 500 msec to 1000 msec).
+ If skip this memmove, we can reduce the boot time.
+
+ Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
+
+commit 670cbde8da83690fed1064c3358f54ae1d693ed2
+Author: Matthias Fuchs <matthias.fuchs@esd.eu>
+Date: Sun Feb 15 22:29:15 2009 +0100
+
+ fpga: Fix Spartan III FPGA booting
+
+ This patch does some minor fixing of the Xilinx Spartan III
+ FPGA boot code:
+
+ - Fixed call order of post configuration callback and
+ success message printing (result of copy-paste?)
+ - remove obsolete comment
+ - minor coding style cleanup
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 3818b677641038d27b2663fbd6771ad38c932f86
+Author: Matthias Fuchs <matthias.fuchs@esd.eu>
+Date: Sun Feb 15 22:28:36 2009 +0100
+
+ fpga: Fix Spartan II FPGA booting
+
+ This patch does some minor fixing of the Xilinx Spartan II
+ FPGA boot code:
+
+ - Fixed call order of post configuration callback and
+ success message printing (result of copy-paste?)
+ - relocate post configuration callback only when it
+ is implemented
+ - remove obsolete comment
+ - minor coding style cleanup
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit b4746d8bf9f4ed6dc8a76c5d52db669604aff84b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 20:26:52 2009 -0500
+
+ drivers/serial/ns16550: move ifdef into Makefile COBJS-$(...)
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 6bcb4b806cef8a5dd08fac9a4a672b96d9ee804e
+Author: Derek Ou <dou@siconix.com>
+Date: Tue Feb 3 16:00:07 2009 -0700
+
+ lcd_putc bug fix for tab.
+
+ Signed-off-by: Derek Ou <dou@siconix.com>
+
+commit 35c9e14d8096e519fe76c953a43d52a09617345c
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Mon Feb 2 09:46:21 2009 +0900
+
+ MIPS: cpu/mips/Makefile: Add a missing START line
+
+ In the commit 79b51ff8205f0354d5300570614c1d2db499679c ([MIPS] cpu/mips/
+ Makefile: Split [CS]OBJS onto separate lines), I wrongly deleted a START
+ line. This patch puts it back.
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit 9a63b7f4f8f3c99cf017e0d3d4a152dfcd913b5a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Feb 21 21:51:21 2009 +0100
+
+ Enable ext2 support for TQM8xxL/M based boards
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e3ba7f137c7c454ad626cd0bd2e84d73c7a8644f
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Fri Feb 20 03:47:50 2009 +0100
+
+ ARM:PXA Use new definitions in mmc.h
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 682beeac34dc9ab18fab58b26973d2e29d113717
+Author: Andy Fleming <afleming@freescale.com>
+Date: Fri Feb 20 03:47:50 2009 +0100
+
+ Reduce the scope of PXA's mmc_read/mmc_write/mmc_bread functions
+
+ These names are being taken over by the new MMC framework. Hopefuly
+ the PXA can be easily ported, and these functions will go away entirely.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit b03d92e5584935886ff91d5aa0755dc8888b7187
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Feb 20 03:47:50 2009 +0100
+
+ pxa: move mmc drivers to drivers/mmc
+
+ introduce new macro CONFIG_PXA_MMC to activate it
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9490f465642c80c054854689a2ef1a77d65cf1f3
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Thu Feb 19 19:27:22 2009 -0600
+
+ ARM:PXA Remove redefinition of mmc_cid and mmc_csd.
+
+ These structures are defined in the common mmc.h
+
+ This was compile checked on cerf250.
+
+commit 94a3312920b6f9b5da27309549fb73650718c10a
+Author: Micha Kalfon <smichak.uv@gmail.com>
+Date: Wed Feb 11 19:50:11 2009 +0200
+
+ pxa: fixing get_timer to return time in miliseconds.
+
+ Fixing the get_timer function to return time in miliseconds instead of
+ ticks. Also fixed PXA boards to use the conventional value of 1000 for
+ CONFIG_SYS_HZ.
+
+ Signed-off-by: Micha Kalfon <smichak.uv@gmail.com>
+
+commit e5e88c3614b79b54719905f66aefb51f9494bc1f
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Thu Feb 19 16:45:43 2009 -0600
+
+ ARM:OMAP3 Change mmc_init to mmc_legacy_init
+
+ omap3_mmc.c was changed to define mmc_legacy_init.
+ Remove unused functions.
+
+ Compile tested on all arm
+ Runtime tested on Zoom1.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit 9e80bb21629988063574f88ca0d28baadff4d963
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Feb 19 17:23:58 2009 +0100
+
+ 82xx, mgcoge: updates for 2009.03
+
+ - activate CS4 for accessing the FPGA
+ - activate Rx buf len > 1 on SMC
+ - pram activated
+ - MTDPARTS_DEFAULT defined
+ - update the size of the flashes in the DTS
+ before booting Linux
+ - MONITOR_LEN updated to 384k
+ - added CONFIG_HOSTNAME
+ - added CONFIG_ENV_BUFFER_PRINT
+ - Environment size reduced to 16k
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit df909554e2401f307925e1bd45d576e4176d9de9
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Feb 19 17:24:01 2009 +0100
+
+ 8xx, mgsuvd: updates for 2009.03
+
+ - activate Rx buf len > 1 on SMC
+ - pram activated
+ - MTDPARTS_DEFAULT defined
+ - update the size of the flash in the DTS
+ before booting Linux
+ - MONITOR_LEN updated to 384k
+ - added CONFIG_HOSTNAME
+ - added CONFIG_ENV_BUFFER_PRINT
+ - Environment size reduced to 16k
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 3511b4e208e12be85b532866f1c660aa2e021557
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Wed Feb 18 19:59:39 2009 +0100
+
+ MMC: Don't use new framework code if not enabled
+
+ Don't use code of new MMC framework in cmd_mmc if CONFIG_GENERIC_MMC
+ isn't enabled.
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 32482be67775e00b4cbc49fba62347c1ecc6229c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Feb 19 13:53:29 2009 +0100
+
+ TQM8xxL: make some room in low memory for future needs
+
+ THe TQM8xxL use a ahnd-optimized linker script to efficiently use the
+ small boot sectors in the flash. This patch makes some room in the
+ first sector to prepare for a size increase of lib_generic/vsprintf.o
+ by a future patch.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c157cec3c3f6dfc194532b3a3ca87f85b642962a
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Feb 18 18:06:18 2009 -0600
+
+ README: remove duplicate entry
+
+ it's been around since the original commit (2ad6b513) that added two
+ identical entries.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 1bba30efe1717bea13026e15c7c7d906419fac69
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Feb 19 00:41:08 2009 +0100
+
+ Coding style cleanup, update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 369d0aa9674b65c83f8553b9bcf9d207dc369223
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Feb 18 17:43:59 2009 -0600
+
+ sata_sil3114: fix compiler warning
+
+ judging from other printfs in the same file, it seems ata should be
+ postpended with the interface number, not the address of the global
+ port variable. Fixes this for current u-boot-mpc83xx tree:
+
+ Configuring for MPC8349ITX board...
+ sata_sil3114.c: In function 'sata_bus_softreset':
+ sata_sil3114.c:99: warning: format '%u' expects type 'unsigned int', but argument 2 has type 'struct sata_port *'
+ sata_sil3114.c:108: warning: format '%u' expects type 'unsigned int', but argument 2 has type 'struct sata_port *'
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit f5675aa5ceeef30740970ab8ca0c8cbc324945cd
+Author: Ron Madrid <ron_madrid@sbcglobal.net>
+Date: Wed Feb 18 14:30:44 2009 -0800
+
+ Create configuration option for restricted ns16550 functions
+
+ This patch will create a configuration option for a minimum configuration for
+ the ns16550 serial driver at drivers/serial/ns16550.c and will apply this new
+ configuration option to the SIMPC8313.h config file in order to fix the NAND
+ bootstrap build error. This option will exclude all functions with exception of
+ NS16550_putc and NS16550_init. This will be used primarily to save space and
+ remove unused code from builds in which space is limited.
+
+ Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
+
+commit 7b0bc0219db8981613259473cf19699ac259b4fb
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Feb 18 16:14:29 2009 -0600
+
+ mkconfig: include board config.h before asm/config.h
+
+ swapping the include order suppresses warnings for board configs
+ that define their own CONFIG_MAX_MEM_MAPPED:
+
+ In file included from /home/r1aaha/git/u-boot/include/config.h:5,
+ from /home/r1aaha/git/u-boot/include/common.h:35,
+ from simpc8313.c:26:
+ /home/r1aaha/git/u-boot/include/configs/SIMPC8313.h:81:1: warning:
+ "CONFIG_MAX_MEM_MAPPED" redefined
+ In file included from /home/r1aaha/git/u-boot/include/config.h:4,
+ from /home/r1aaha/git/u-boot/include/common.h:35,
+ from simpc8313.c:26:
+ /home/r1aaha/git/u-boot/include/asm/config.h:28:1: warning: this is
+ the location of the previous definition
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit b8845abdc0dcf20d0944e965153f5ae7a9c3077c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Feb 18 21:35:38 2009 +0100
+
+ Fix build errors after making flash_get_info() non-static
+
+ Fix for these build problems:
+ error: static declaration of 'flash_get_info' follows non-static declaration
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit b4996d6b2140e5da7f1c346f37a67b19907b307a
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Feb 18 13:18:00 2009 +0100
+
+ ppc4xx: PCIe: Change 16GB inbound memory to 4GB
+
+ This patch fixes a problem recently seen on some 4xx platforms. For
+ example on Kilauea PCIe slot #0.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f50fe4bd613c6d35a2c34055f02e9501dd6a9ad5
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Feb 18 14:05:37 2009 +0100
+
+ ppc4xx: Some more PMC405 coding-style cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2f6eb9170bf91b72ea51dcea2a8b9c11b0e20bc5
+Author: Matthias Fuchs <matthias.fuchs@esd.eu>
+Date: Sun Feb 15 22:27:47 2009 +0100
+
+ ppc4xx: Update PMC405 board support
+
+ This patch prepares the good old PMC405 board support for
+ upcoming PMC405V2 patches.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c553b5f4a0c77fc76e1d25e71c8aaa47657e2d6f
+Author: Matthias Fuchs <matthias.fuchs@esd.eu>
+Date: Sun Feb 15 22:26:54 2009 +0100
+
+ ppc4xx: Cleanup PMC405 board support
+
+ This patch fixes coding style for PMC405 board support.
+ Also some unneeded features/code is removed.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b4e85d0f37b5b924fbf834867ad6d0b31b86f667
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Thu Feb 5 04:08:20 2009 +0100
+
+ qong: changes to Dave/DENX Qong configuration
+
+ 1. Changes to the default environment:
+ - "bootcmd" defined as "run flash_self"
+ - "saveenv" command removed from "update"
+ - "uboot" changed to "u-boot" (also in "load")
+ - "addmtd" variable defined (and added to all boot commands)
+ 2. CONFIG_CMD_JFFS2 defined to enable "mtdparts" command
+ 3. MTDIDS_DEFAULT and MTDPARTS_DEFAULT defined
+ 4. CONFIG_SYS_CBSIZE changed from 256 to 512. That solves the problem
+ with truncated "bootargs" environment variable.
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 5f0320108870e5d62983d1d5c13a2a087dddf686
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 1 17:07:52 2009 +0100
+
+ common/console: avoid ifdef CONFIG_CONSOLE_MUX when it's possible
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ec6f14994602276660f7264c6ab3b91ef1f7614d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Feb 1 17:07:51 2009 +0100
+
+ common/console: coding style cleanup
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit daaf74f176b548dfd34a9990231f4189201d57ba
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Jan 29 20:02:23 2009 -0500
+
+ mpc8xx_pcmcia: move CONFIG_8xx out of .c file and into Makefile
+
+ Move the CONFIG_8xx mpc8xx_pcmcia.c protection out of the C file and
+ into the Makefile so we avoid pointless compiling of the file.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 7bd2722e890bc877a3c057d7ccddc80451c99939
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Jan 29 20:02:07 2009 -0500
+
+ disk: convert part_* files to COBJ-$(CONFIG_XXX) style
+
+ Move the CONFIG_XXX out of the part_XXX.c file and into Makefile to
+ avoid pointless compiles.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit f05fa9205e04986176dc7ab8b710bcb5fbe9f338
+Author: Petri Lehtinen <petri.lehtinen@inoi.fi>
+Date: Thu Jan 29 10:35:40 2009 +0200
+
+ include/image.h: Ease grepping of image_* functions
+
+ Because the functions have been defined using macros, grepping for
+ their definitions is not possible. This patch adds the real function
+ names in comments.
+
+ Signed-off-by: Petri Lehtinen <petri.lehtinen@inoi.fi>
+ Acked-by: Mike Frysinger <vapier@gentoo.org>
+
+commit bdab39d358e63aa47f400a8a76b8d5f283842df3
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Jan 28 19:08:14 2009 -0500
+
+ rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
+
+ The CONFIG_CMD_ENV option controls enablement of the `saveenv` command
+ rather than a generic "env" command, or anything else related to the
+ environment. So, let's make sure the define is named accordingly.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8b0592b89e0f9f81c9e150c81d96f8a43e4d6101
+Author: Valeriy Glushkov <gvv@lstec.com>
+Date: Fri Jan 23 20:02:17 2009 +0200
+
+ disable imls command if no flash is defined
+
+ Default CONFIG_CMD_IMLS must be disabled when CONFIG_SYS_NO_FLASH is defined
+
+ Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
+
+commit 923aa48126259c13de95131203f1d28bfa5cb889
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Fri Jan 23 13:27:18 2009 +0100
+
+ API: Improve glue mid-layer of the API demo application.
+
+ - Extend ub_dev_read() and ub_dev_recv() so they return the length actually
+ read, which allows for better control and error handling (this introduces
+ additional error code API_ESYSC returned by the glue mid-layer).
+
+ - Clean up definitions naming and usage.
+
+ - Other minor cosmetics.
+
+ Note these changes do not touch the API proper, so the interface between
+ U-Boot and standalone applications remains unchanged.
+
+ Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 44a94e596ba0f6d0951b165403c520bf55b1c56f
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Fri Jan 23 13:27:17 2009 +0100
+
+ API: Only output test data when reading was successful.
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+
+commit 7fb6c4f9b06c5539043c8bfc6565710b8090841d
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Fri Jan 23 13:27:16 2009 +0100
+
+ API: Provide syscall entry point for the ARM architecture.
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+ Acked-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit b84d7d8f1e1066f810866304a16a3583f88e7c98
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Fri Jan 23 13:27:15 2009 +0100
+
+ API: Use stack pointer as API signature search hint in the glue layer.
+
+ De-hardcode range in RAM we search for the API signature. Instead use the stack
+ pointer as a hint to narrow down the range in which the signature could reside
+ (it is malloc'ed on the U-Boot heap, and is hoped to remain in some proximity
+ from stack area). Adjust PowerPC code in API demo to the new scheme.
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+ Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 86b4bafdfaf669ede8fd99044abc7e27ea29b4f5
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Feb 17 10:26:38 2009 +0100
+
+ TQM8260: fix locations of kernel and ramdisk images in flash
+
+ After introducing redundant environment the kernel images was
+ overlapping with environment.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2b68b23373f96199a0cafbfd7a9f79ed62381ebb
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Feb 11 19:26:15 2009 +0100
+
+ 83xx: add missing TIMING_CFG1_CASLAT_* defines
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit c9e34fe2e86f7b6cc8260f4b24cbdc7dd81e04c5
+Author: Valeriy Glushkov <gvv@lstec.com>
+Date: Thu Feb 5 14:35:21 2009 +0200
+
+ mpc8349itx: allow SATA boot from the onboard SIL1334
+
+ This patch allows using of SATA devices connected
+ to the onboard PCI SIL1334 SATA controller.
+
+ Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit e1ac387f4645499746856adc1aeaa9787da2eca6
+Author: Andy Fleming <afleming@freescale.com>
+Date: Thu Oct 30 16:50:14 2008 -0500
+
+ 83xx: Add eSDHC support on 8379 EMDS board
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 80522dc8369a89938369fbcee572e662373bc9a3
+Author: Andy Fleming <afleming@freescale.com>
+Date: Thu Oct 30 16:51:33 2008 -0500
+
+ 85xx: Add eSDHC support for 8536 DS
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 50586ef24ed5caf6ce5591df76f355009da2cd79
+Author: Andy Fleming <afleming@freescale.com>
+Date: Thu Oct 30 16:47:16 2008 -0500
+
+ Add support for the Freescale eSDHC found on 8379 and 8536 SoCs
+
+ This uses the new MMC framework
+
+ Some contributions by Dave Liu <daveliu@freescale.com>
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 272cc70b211e945e4413122aa73868f6ada732a5
+Author: Andy Fleming <afleming@freescale.com>
+Date: Thu Oct 30 16:41:01 2008 -0500
+
+ Add MMC Framework
+
+ Here's a new framework (based roughly off the linux one) for managing
+ MMC controllers. It handles all of the standard SD/MMC transactions,
+ leaving the host drivers to implement only what is necessary to
+ deal with their specific hardware.
+
+ This also hooks the infrastructure into the PowerPC board code
+ (similar to how the ethernet infrastructure now hooks in)
+
+ Some of this code was contributed by Dave Liu <daveliu@freescale.com>
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 1de97f9856f697380cc504126ab92561ed238803
+Author: Andy Fleming <afleming@freescale.com>
+Date: Thu Oct 30 16:31:39 2008 -0500
+
+ Eliminated arch-specific mmc header requirement
+
+ The current MMC infrastructure relies on the existence of an
+ arch-specific header file. This isn't necessary, and a couple
+ drivers were forced to implement dummy files to meet this requirement.
+ Instead, we move the stuff in those header files into a more appropriate
+ place, and eliminate the stubs and the #include of asm/arch/mmc.h
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit abb5466ccf4ce50f412d459586f4f4b81cb73ac3
+Author: Andy Fleming <afleming@freescale.com>
+Date: Thu Oct 30 16:21:00 2008 -0500
+
+ Convert mmc_init to mmc_legacy_init
+
+ This is to get it out of the way of incoming MMC framework
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit b2e2ed0233a5ef299361abec4fbdaefb63456eff
+Author: Andy Fleming <afleming@freescale.com>
+Date: Thu Oct 30 16:19:25 2008 -0500
+
+ Eliminate support for using MMC as memory
+
+ MMC cards are not memory, so we stop treating them that way.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit e1be0d25ecf494ae81245ca438738ba839d6329b
+Author: Poonam_Aggrwal-b10812 <b10812@freescale.com>
+Date: Sun Jan 4 08:46:38 2009 +0530
+
+ 32bit BUg fix for DDR2 on 8572
+
+ This errata fix is required for 32 bit DDR2 controller on 8572.
+ May also be required for P10XX20XX platforms
+
+ Signed-off-by: Poonam_Agarwal-b10812 <b10812@lc1106.zin33.ap.freescale.net>
+
+commit e0c4fac79d4d74572ddd43f75e7189cecca8d0ad
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Feb 16 09:40:20 2009 -0600
+
+ TQM85xx: Fix a couple warnings in TQM8548 build
+
+ The ecm variable in sdram.c was being declared for all 8548, but only
+ used by specific 8548 boards, so we make that variable require those
+ specific boards, too
+
+ The nand code was using an index "i" into a table, and then re-using "i"
+ to set addresses for each upm. However, then it relied on the old value
+ of i still being there to enable things. Changed the second "i" to "j"
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit cf07a5baece0ecfc5284cfda8a4e68eaf92782f8
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Wed Feb 11 18:38:26 2009 +0100
+
+ MPC85xx: TQM8548: workaround for erratum DDR 19 and 20
+
+ This patch adds the workaround for erratum DDR20 according to MPC8548
+ Device Errata document, Rev. 1: "CKE signal may not function correctly
+ after assertion of HRESET". Furthermore, the bug DDR19 is fixed in
+ processor version 2.1 and the work-around must be removed.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit 080408fdc71706adcb883d22125637c54f6010b1
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Wed Feb 11 18:38:25 2009 +0100
+
+ MPC85xx: TQM8548: use cache for AG and BE variants
+
+ This patch makes accesses to the system memory cachable by removing the
+ caching-inhibited and guarded flags from the relevant TLB entries for
+ the TQM8548_BE and TQM8548_AG modules. FYI, the Freescale MPC85* boards
+ are configured similarly.
+
+ This results in a big averall performace improvement. TFTP downloads,
+ NAND Flash accesses, kernel boots, etc. are much faster.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit dc5f55d636d7bf21ba17758fac4b929ec4c059f2
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Wed Feb 11 18:38:24 2009 +0100
+
+ MPC85xx: TQM8548_AG: add 1 GiB DDR2-SDRAM configuration
+
+ This patch add support for the 1 GiB DDR2-SDRAM on the TQM8548_AG
+ module.
+
+ Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit 88b0e88d186479349e5a2b771e82775109e10fb4
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Wed Feb 11 18:38:23 2009 +0100
+
+ MPC85xx: TQM8548: fix SDRAM timing for 533 MHz
+
+ According to new TQM8548 timing specification:
+ Refresh Recovery: 34 -> 53 clocks
+ CKE pulse width: 1 -> 3 cycles
+ Window for four activities: 13 -> 14 cycles
+
+ Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit a865bcdac89278cac4dfc07dec8299403110499d
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Wed Feb 11 18:38:22 2009 +0100
+
+ MPC85xx: TQM8548: add support for the TQM8548_AG module
+
+ The TQM8548_AG is a variant of the TQM8548 module with 1 GiB memory,
+ CAN and without PCI/PCI-X and RTC. U-Boot can be built for this module
+ with "$ make TQM8548_AG_config".
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit ad7ee5d43b0db94079d56521dabca25674f28747
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Wed Feb 11 18:38:21 2009 +0100
+
+ MPC85xx: TQM8548: add support for the TQM8548_BE module
+
+ The TQM8548_BE is a variant of the TQM8548 module with NAND and CAN
+ interface. With NAND support, the image is significantly larger and
+ TEXT_BASE is adjusted accordingly. U-Boot can be built for this
+ module with "$ make TQM8548_BE_config".
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit a318234878c346e673b2ef8dc4b14b338fe7fc2b
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Wed Feb 11 18:38:20 2009 +0100
+
+ MPC85xx: TQM85xx: make standard PCI/PCI-X configurable
+
+ The TQM8548_AG module does not have the standard PCI/PCI-X interface
+ connected but just the PCI Express interface . So far it was not
+ possible to disable it without disabling the complete PCI interface
+ (CONFIG_PCI) including PCI Express.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit 31ca9119c3186cec579b54d2a7a2b361b4d2b7bf
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Wed Feb 11 18:38:19 2009 +0100
+
+ MPC85xx: TQM85xx: fix flash protection for boot loader
+
+ As the reset vector is located at 0xfffffffc, all flash sectors from the
+ beginning of the U-Boot binary to 0xffffffff must be protected. On the
+ TQM8548-AG having small sectors at the end of the flash it happened that
+ the last two sector were not protected and an "erase all" left an
+ un-bootable system behind:
+
+ Bank # 2: CFI conformant FLASH (32 x 16) Size: 32 MB in 270 Sectors
+ AMD Standard command set, Manufacturer ID: 0xEC, Device ID: 0x257E
+ Erase timeout: 8192 ms, write timeout: 1 ms
+
+ FFFA0000 E RO FFFC0000 RO FFFE0000 RO FFFE4000 RO FFFE8000 RO
+ FFFEC000 RO FFFF0000 RO FFFF4000 RO FFFF8000 E FFFFC000
+
+ The same bug seems to be in drivers/mtd/cfi_flash.c:flash_init() and many
+ board BSPs as well.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit a1c8a719262151f97119e76166043ee3da3f97b2
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Feb 6 14:30:40 2009 -0600
+
+ 86xx: Update CPU info output on bootup
+
+ - Update style of 86xx CPU information on boot to more closely
+ match 85xx boards
+ - Fix detection of 8641/8641D
+ - Use strmhz() to display frequencies
+ - Display L1 information
+ - Display L2 cache size
+ - Fixed CPU/SVR version output
+
+ == Before ==
+ Freescale PowerPC
+ CPU:
+ Core: E600 Core 0, Version: 0.2, (0x80040202)
+ System: Unknown, Version: 2.1, (0x80900121)
+ Clocks: CPU:1066 MHz, MPX: 533 MHz, DDR: 266 MHz, LBC: 133 MHz
+ L2: Enabled
+ Board: X-ES XPedite5170 3U VPX SBC
+
+ == After ==
+ CPU: 8641D, Version: 2.1, (0x80900121)
+ Core: E600 Core 0, Version: 2.2, (0x80040202)
+ Clock Configuration:
+ CPU:1066.667 MHz, MPX:533.333 MHz
+ DDR:266.667 MHz (533.333 MT/s data rate), LBC:133.333 MHz
+ L1: D-cache 32 KB enabled
+ I-cache 32 KB enabled
+ L2: 512 KB enabled
+ Board: X-ES XPedite5170 3U VPX SBC
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 22c00f8d7d454d77e759df58415d2d3f3d7e154c
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Thu Feb 5 11:25:24 2009 -0600
+
+ 86xx: Update Global Utilities structure
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 4ef630df773e45806d701bf5d25c328778bb4cde
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Thu Feb 5 11:25:25 2009 -0600
+
+ 86xx: Reset update
+
+ Update the 86xx reset sequence to try executing a board-specific reset
+ function. If the board-specific reset is not implemented or does not
+ succeed, then assert #HRESET_REQ. Using #HRESET_REQ is a more standard
+ reset procedure than the previous method and allows all board
+ peripherals to be reset if needed.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit edf0e2524a8c6a3e91c009c496a0aa0ae89cd8ab
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Feb 10 23:53:40 2009 -0600
+
+ fsl-ddr: Allow system to boot if we have more than 4G of memory
+
+ Previously if we >=4G of memory and !CONFIG_PHYS_64BIT we'd report
+ an error and hang. Instead of doing that since DDR is mapped in the
+ lowest priority LAWs we setup the DDR controller and the max amount
+ of memory we report back is what we can map (CONFIG_MAX_MEM_MAPPED)
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit 8d949aff38cfb4388cbd73876e77bcd06d601f20
+Author: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+Date: Wed Jan 21 17:17:33 2009 -0600
+
+ mpc85xx: Add support for the P2020
+
+ Added various p2020 processor specific details:
+ * SVR for p2020, p2020E
+ * immap updates for LAWs and DDR on p2020
+ * LAW defines related to p2020
+
+ Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+ Signed-off-by: Travis Wheatley <Travis.Wheatley@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit cb69e4de8702e108324e1c40363f30ef6f2e2918
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Feb 10 17:36:15 2009 -0600
+
+ 85xx: print boot header info to distinquish 36-bit addr map on MPC8572 DS
+
+ Added some info that is printed out when we boot to distiquish if we
+ built MPC8572DS_config vs MPC8572DS_36BIT_config since they have
+ different address maps.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit feede8b07013b33fca8dd2a916b3ac86bf4d4c0a
+Author: Andy Fleming <afleming@freescale.com>
+Date: Fri Dec 5 20:10:22 2008 -0600
+
+ Fixup SGMII PHY ids in the device tree
+
+ The device tree's PHY addresses need to be fixed up if we're using the
+ SGMII Riser Card.
+
+ The 8572, 8536, and 8544 DS boards were modified to call this function.
+
+ Code idea taken from Liu Yu <yu.liu@freescale.com>
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 5dc0cf68f8f101042997d75188081d8526d705ea
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Feb 11 15:10:31 2009 -0600
+
+ Make some minor whitespace changes to eliminate line-wrapping
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 9e56986a2b74d197f51eca70fad7b836b1900c4d
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Feb 11 15:07:24 2009 -0600
+
+ Add eth_get_dev_by_index
+
+ This allows code to iterate through the ethernet devices
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit b67305120aaf268a6140125346678166d14f1f47
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Feb 9 22:03:04 2009 -0600
+
+ 85xx: Fix bug in device tree setup in 36-bit physical confg
+
+ In the 36-bit physical config for MPC8572DS when need the start address
+ of memory and it size to be kept in phys_*_t instead of a ulong since
+ we support >4G of memory in the config and ulong cant represent that.
+ Otherwise we end up seeing the memory node in the device tree reporting
+ back we have memory starting @ 0 and of size 0.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ad97dce18445ff05bf326094e691a01aa95aa8dc
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Feb 9 22:03:05 2009 -0600
+
+ 85xx: Fix address map for 36-bit config of MPC8572DS
+
+ When we introduced the 36-bit config of the MPC8572DS board we had the
+ wrong PCI MEM bus address map. Additionally, the change to the address
+ map exposes a small issue in our dummy read on the ULI bus. We need
+ to use the new mapping functions to handle that read properly in the
+ 36-bit config.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f8523cb0815b2d3d2d780b7d49ca614105555f58
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Feb 6 09:56:35 2009 -0600
+
+ 85xx: Fix how we map DDR memory
+
+ Previously we only allowed power-of-two memory sizes and didnt
+ handle >2G of memory. Now we will map up to CONFIG_MAX_MEM_MAPPED
+ and should properly handle any size that we can make in the TLBs
+ we have available to us
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 1542fbdeec0d1e2a6df13189df8dcb1ce8802be3
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Feb 6 09:56:34 2009 -0600
+
+ fsl-ddr: ignore memctl_intlv_ctl setting if only one DDR controller
+
+ If we only have one controller we can completely ignore how
+ memctl_intlv_ctl is set. Otherwise other levels of code get confused
+ and think we have twice as much memory.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit b29dee3c906e9daaf6baf7772d2e15e26b8636b8
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Feb 4 09:35:57 2009 -0600
+
+ 85xx: Format cpu freq printing to handle 8 cores
+
+ Only print 4 cpu freq per line. This way when we have 8 cores its a
+ bit more readable.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9704f9caf53f5cae547d8c5e1ae94aa4e57b160f
+Author: Abraham, Thomas <t-abraham@ti.com>
+Date: Tue Oct 28 16:51:31 2008 +0530
+
+ USB: Remove LUN number from CDB
+
+ The LUN number is not part of the Command Descriptor Block (CDB) for scsi inquiry, request sense, test unit ready, read capacity and read10 commands. This patch removes the LUN number information from the CDB.
+
+ Signed-off-by: Thomas Abraham <t-abraham@ti.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit f3c0de636252f3a18654c8f9c6370a9574a7e755
+Author: Atin Malaviya <atin.malaviya@gmail.com>
+Date: Tue Feb 3 15:17:10 2009 -0500
+
+ Added usbtty_configured() check. Fixed attribute(packed) warnings.
+
+ V3: Fixed line-wrap problem due to user error in mail!
+
+ Added usb_configured() checks in usbtty_puts() and usbtty_putc() to get around a hang
+ when usb is not connected and the user has set up multi-io (setenv stdout serial,usbtty etc).
+ Got rid of redundant __attribute__((packed)) directives that were causing warnings from gcc.
+
+ Signed-off-by: Atin Malaviya <atin.malaviya@gmail.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit e7de18afe8ecf96a51ef981d06066eeb6b1254e7
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Fri Feb 13 09:23:36 2009 +0100
+
+ i.MX31: Start the I2C clock on driver initialisation
+
+ i.MX31 powers on with most clocks running, so, after a power on this explicit
+ clock start up is not required. However, as Linux boots it disables most clocks
+ to save power. This includes the I2C clock. If we then soft reboot from Linux
+ the I2C clock stays off. This breaks the phycore, which has its environment in
+ I2C EEPROM. Fix the problem by explicitly starting the clock in I2C driver
+ initialisation routine.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Ack-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 15208ac9eae1c340c4bc11f70cbf5c9da78a57ba
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 20:36:14 2009 -0500
+
+ i2c.h: drop i2c_reg_{read, write} hack for Blackfin parts
+
+ The Blackfin i2c driver has been rewritten thus the special ifdefs in the
+ common code are no longer needed.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c2d9befa0b4695b89476fb5d259742c09afe243f
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Feb 12 08:08:54 2009 +0100
+
+ 82xx, mgcoge: fix compile error
+
+ With actual u-boot compiling the mgcoge port fails, because
+ since commit ba705b5b1a97b47388ed48858bef6bf7b6bfcd56 it is
+ necessary to define CONFIG_NET_MULTI.
+
+ Seems to me the mgcoge port is the only actual existing 8260
+ port who uses CONFIG_ETHER_ON_SCC, so no other 8260 port needed
+ to be fixed.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 9cacf4fc4035eabe9d9ae2a9a188c51a8027c91e
+Author: Dirk Eibach <eibach@gdsys.de>
+Date: Mon Feb 9 08:18:34 2009 +0100
+
+ ppc4xx: Add README entry for CONFIG_PCI_DISABLE_PCIE
+
+ Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7369f0e384e2a831be13a7773a58242c9173fa9c
+Author: Carolyn Smith <carolyn.smith@tektronix.com>
+Date: Thu Feb 12 06:13:44 2009 +0100
+
+ ppc4xx: Fix initialization of the SDRAM_CODT register
+
+ This fixes the initialization of the SDRAM_CODT register in the ppc4xx DDR2
+ initialization code. It also removes use of the SDRAM_CODT_FEEDBACK_RCV_SINGLE_END
+ and SDRAM_CODT_FEEDBACK_DRV_SINGLE_END #define's since they are reserved bits.
+
+ Signed-off-by: Carolyn Smith <carolyn.smith@tektronix.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cef0efaf2fa55d1f25066cfb02bd984c27f9ca31
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Feb 11 09:29:33 2009 +0100
+
+ ppc4xx: Fix problem with board_eth_init() vs cpu_eth_init() on AMCC boards
+
+ Some AMCC eval boards do have a board_eth_init() function calling
+ pci_eth_init(). These boards need to call cpu_eth_init() explicitly now
+ with the new eth_init rework.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c645012aefebb301e6907d148c6c8efacac049d4
+Author: Adam Graham <agraham@amcc.com>
+Date: Mon Feb 9 13:18:12 2009 -0800
+
+ ppc4xx: Autocalibration can set RDCC to over aggressive value.
+
+ The criteria of the AMCC SDRAM Controller DDR autocalibration
+ U-Boot code is to pick the largest passing write/read/compare
+ window that also has the smallest SDRAM_RDCC.[RDSS] Read Sample
+ Cycle Select value.
+
+ On some Kilauea boards the DDR autocalibration algorithm can
+ find a large passing write/read/compare window with a small
+ SDRAM_RDCC.[RDSS] aggressive value of Read Sample Cycle Select
+ value "T1 Sample".
+
+ This SDRAM_RDCC.[RDSS] Read Sample Cycle Select value of
+ "T1 Sample" proves to be to aggressive when later on U-Boot
+ relocates into DDR memory and executes.
+
+ The memory traces on the Kilauea board are short so on some
+ Kilauea boards the SDRAM_RDCC.[RDSS] Read Sample Cycle Select
+ value of "T1 Sample" shows up as a potentially valid value for
+ the DDR autocalibratiion algorithm.
+
+ The fix is to define a weak default function which provides
+ the minimum SDRAM_RDCC.[RDSS] Read Sample Cycle Select value
+ to accept for DDR autocalibration. The default will be the
+ "T2 Sample" value. A board developer who has a well defined
+ board and chooses to be more aggressive can always provide
+ their own board specific string function with the more
+ aggressive "T1 Sample" value or stick with the default
+ minimum SDRAM_RDCC.[RDSS] value of "T2".
+
+ Also put in a autocalibration loop fix for case where current
+ write/read/compare passing window size is the same as a prior
+ window size, then in this case choose the write/read/compare
+ result that has the associated smallest RDCC T-Sample value.
+
+ Signed-off-by: Adam Graham <agraham@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2ede879fcb67470524847bb4fc8972651bb46184
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Feb 11 09:37:12 2009 +0100
+
+ ppc4xx: Fix problem with CONFIG_MAX_MEM_MAPPED in include/asm-ppc/config.h
+
+ CONFIG_SDRAM_PPC4xx_IBM_DDR2 is not set when include/asm-ppc/config.h is
+ included. So for katmai, CONFIG_MAX_MEM_MAPPED will get set to 256MB.
+
+ It makes perfect sense to set CONFIG_MAX_MEM_MAPPED to 2GB for all PPC4xx
+ boards right now.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f15c6515fc23f83c51f3de272ca23d86b80e81b1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Feb 12 00:08:39 2009 +0100
+
+ Coding style cleanup; update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5fc56b907d993260b9ebdb137af66fe69635ae9e
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Jan 30 16:36:40 2009 -0600
+
+ Add feature-removal-schedule.txt
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 255d28e1642e8fc32a6753226be1a96b481ce111
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Feb 10 09:32:38 2009 +0100
+
+ 8xx serial, smc: Coding-Style cleanup serial SMC driver
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 2b3f12c214346508cae3f1245808c1ca54c81fdd
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Feb 10 09:31:47 2009 +0100
+
+ 8xx serial, smc: add configurable SMC Rx buffer len
+
+ This patch adds the configuration option CONFIG_SYS_SMC_RXBUFLEN.
+ With this option it is possible to allow the receive
+ buffer for the SMC on 8xx to be greater then 1. In case
+ CONFIG_SYS_SMC_RXBUFLEN == 1 this driver works as the
+ old version.
+
+ When defining CONFIG_SYS_SMC_RXBUFLEN also
+ CONFIG_SYS_MAXIDLE must be defined to setup the maximum
+ idle timeout for the SMC.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit e915f8bb73d74178bc21d3a457959883b1afd1c0
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Feb 5 21:04:36 2009 -0500
+
+ common/{hush, kgdb, serial}.c: build by COBJS-$(...) in Makefile
+
+ Move global '#ifdef CONFIG_xxx .... #endif' out of the .c files and into
+ the COBJS-$(CONFIG_xxx) in the Makefile. Also delete unused var in kgdb
+ code in the process.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit ab76e9848a1f4db64d14233741d739a3b3360c93
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Feb 5 21:04:50 2009 -0500
+
+ bzip2: move ifdef handling to Makefile COBJS-$(...)
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit ae0b05df04e1cc65c5ad19ccd362f4be82df7316
+Author: Jerry Van Baren <gvb.uboot@gmail.com>
+Date: Thu Feb 5 22:18:02 2009 -0500
+
+ Fix whitespace damage: double space changed to a tab
+
+ At some point an intentional double space at the end of the sentence
+ got changed into a tab in the GPL header line:
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+
+ This patch fixes the damage.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 4f975678de995b55749d5e84590c268972a7c835
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Feb 10 09:53:29 2009 +0100
+
+ cfi: make flash_get_info() non static
+
+ If on your board is more than one flash, you must know
+ the size of every single flash, for example, for updating
+ the DTS before booting Linux. So make this function
+ flash_get_info() extern, and you can have all info
+ about your flashes.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 86321fc1128c93a10ac4afb9d317b0df8ece0f9e
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Thu Feb 5 23:58:25 2009 -0800
+
+ net: removed board-specific CONFIGs from MPC5xxx FEC driver
+
+ Added new CONFIG options for the three type of MAC-PHY interconnect and
+ applied them all relevant board config files
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 638ed3e296e70fab286d157b7adedaaa4a09a474
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Feb 5 21:04:47 2009 -0500
+
+ net/sntp.c: move ifdef into Makefile COBJS-$(...)
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 9e5be8214ba751436e57c3be044bf6dccb9a6687
+Author: Andy Fleming <afleming@freescale.com>
+Date: Tue Feb 3 18:26:41 2009 -0600
+
+ tsec: Fix a bug in soft-resetting
+
+ SOFT_RESET must be asserted for at least 3 TX clocks. Usually, that's about 30
+ clock cycles, so it's been mostly working. But we had no guarantee, and at
+ slower bitrates, it's just over a microsecond (over 1000 clock cycles). This
+ enforces a 2 microsecond gap between assertion and deassertion.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 09fcc8b5d86903b76e7e4d1d879d6f4bca25c27b
+Author: Simon Munton <simon@nidoran.m5data.com>
+Date: Mon Feb 2 09:44:08 2009 +0000
+
+ Fix 100Mbs ethernet operation on sh7763 based boards
+
+ 100Mbs ethernet does not work on sh7763 chips due to the wrong value being
+ used in the GECMR register. Following diff fixes the problem
+
+ Signed-off-by: Simon Munton <simon@nidoran.m5data.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 2bc2a8f6dc9fdda465317da59474e65c24a398a2
+Author: ksi@koi8.net <ksi@koi8.net>
+Date: Fri Feb 6 16:27:55 2009 -0800
+
+ Fix MPC8260 with ethernet on SCC
+
+ This fixes MPC8260 compilation with ethernet on SCC. Probably was a
+ typo or something...
+
+ Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit ae5d8f613cec1a6af7bf1fc9c42a3b856f021023
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Jan 30 12:56:15 2009 +0100
+
+ 82xx serial, smc: Coding-Style cleanup serial SMC driver
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit c92fac91a06c60f874c605e3ca80dd407c1caaa7
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Jan 30 12:55:38 2009 +0100
+
+ 82xx serial, smc: add configurable SMC Rx buffer len
+
+ This patch adds the configuration option CONFIG_SYS_SMC_RXBUFLEN.
+ With this option it is possible to allow the receive
+ buffer for the SMC on 82xx to be greater then 1. In case
+ CONFIG_SYS_SMC_RXBUFLEN == 1 this driver works as the
+ old version.
+
+ When defining CONFIG_SYS_SMC_RXBUFLEN also
+ CONFIG_SYS_MAXIDLE must be defined to setup the maximum
+ idle timeout for the SMC.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit bced7ccefa08512c54a6d146658ff7dbc33d5dfe
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Feb 6 08:08:06 2009 -0600
+
+ ppc: Fix roll over bug in flush_cache()
+
+ If we call flush_cache(0xfffff000, 0x1000) it would never
+ terminate the loop since end = 0xffffffff and we'd roll over
+ our counter from 0xfffffe0 to 0 (assuming a 32-byte cache line)
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 87c9063963561d3d01064be34d0c30855a56587b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Feb 5 20:40:58 2009 -0600
+
+ ppc: Move CONFIG_MAX_MEM_MAPPED to common config.h
+
+ Moved CONFIG_MAX_MEM_MAPPED to the asm/config.h so its kept consistent
+ between the two current users (lib_ppc/board.c, 44x SPD DDR2).
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 47d41cc3a11a03c6d56146d056145df73f47eb50
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Feb 5 20:40:57 2009 -0600
+
+ Add an architecture specific config.h for common defines
+
+ We have common defines that we duplicate in various ways. Having an
+ arch specific config.h gives us a common location for those defines.
+
+ Eventually we should be able to replace this when we have proper
+ Kconfig support.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 4c78d4a6c01621721b732418e1c6da684a56bbb1
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Tue Feb 3 18:10:56 2009 -0600
+
+ mpc8641hpcn: Change PCI MEM pci bus address
+
+ Now that the rest of u-boot can support it, change the PCI bus
+ address of the PCI MEM regions from 0x80000000 to 0xc0000000,
+ and use the same bus address for both PCI1 and PCI2. This will
+ maximize the amount of PCI address space left over to map RAM
+ on systems with large amounts of memory.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit 1785dbeed43599eed1d8875673c96912cd770141
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Tue Feb 3 18:10:55 2009 -0600
+
+ drivers/block/ahci: Fix pci mapping bug
+
+ The code assumes that the pci bus address and the virtual
+ address used to access a region are the same, but they might
+ not be. Fix this assumption.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit d591a80e74091e7a0658d165721e6c7de2ef0bcd
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Tue Feb 3 18:10:54 2009 -0600
+
+ MPC8641HPCN: Enable CONFIG_ADDR_MAP
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit 49f46f3bf08aaf7b1db131a1082f1e603bb7a94b
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Tue Feb 3 18:10:53 2009 -0600
+
+ mpc8641hpcn: Clean up PCI mapping concepts
+
+ Clean up PCI mapping concepts in the 8641 config - rename _BASE
+ to _BUS, as it's actually a PCI bus address, separate virtual
+ and physical addresses into _VIRT and _PHYS, and use each
+ appopriately.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit c9315e6b4f244981de0b2eaaa29a7838a165b494
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Tue Feb 3 18:10:52 2009 -0600
+
+ mpc86xx: Add support to populate addr map based on BATs
+
+ If CONFIG_ADDR_MAP is enabled, update the address map
+ whenever we write a bat.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit d35ae5a938679bd7e18167faf79d0fb3c6639b51
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Tue Feb 3 18:10:51 2009 -0600
+
+ powerpc: Move duplicated BAT defines to mmu.h
+
+ The BAT fields are architected; there's no need for these to be in
+ cpu-specific files. Drop the duplication and move these to
+ include/asm-ppc/mmu.h. Also, remove the BL_xxx defines that were only
+ used by the alaska board, and switch to using the BATU_BL_xxx defines
+ used by all the other boards. The BL_ defines previously in use
+ had to be shifted into the proper position for use, which was inefficient.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit 6e61fae4d360a1380b63e7d007b31477e366bcce
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Tue Feb 3 18:10:50 2009 -0600
+
+ drivers/pci: Create pci_map_bar function
+
+ It is no longer always true that the pci bus address can be
+ used as the virtual address for pci accesses. pci_map_bar()
+ is created to return the virtual address for a pci region.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit 2ecca3401775b125c3b9ff65766befb23989414b
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Tue Feb 3 18:10:49 2009 -0600
+
+ mpc8641hpcn: Set up outbound pci windows before inbound
+
+ Because the inbound pci windows are mapped generously, set up
+ the more specific outbound windows first. This way, when we
+ search the pci regions for something, we will hit on the more
+ specific region. This can actually be a problem on systems
+ with large amounts of RAM.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit b81b773ead0687114dc8a800f99ea6e504447739
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Mon Feb 2 16:34:52 2009 -0600
+
+ mpc8641hpcn: Use physical address in flash banks defintion
+
+ If the VA and PA of the flash aren't the same, the banks list
+ should be initialized to hold the physical address. Correct this.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit 0d19f6c8cbe71b9e6d8c6bd6742ed2551e918870
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Tue Feb 10 00:22:31 2009 +0100
+
+ qong: support for Dave/DENX QongEVB-LITE board
+
+ This patch adds support for Dave/DENX QongEVB-LITE i.MX31-based board.
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 62cbc408f52fc9a5eb849e0b882c504780c9d183
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Mon Feb 9 18:45:28 2009 +0100
+
+ dnet: driver for Dave DNET ethernet controller
+
+ Driver for Dave DNET ethernet controller (used on Dave/DENX
+ QongEVB-LITE board).
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 2d43e873a29ca4959ba6a30fc7fb396d3fd0dccf
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Feb 6 09:49:32 2009 -0600
+
+ pci: give preference to non-PCI_REGION_SYS_MEMORY regions when matching
+
+ When we search for an address match in pci_hose_{phys_to_bus,bus_to_phys}
+ we should give preference to memory regions that aren't system memory.
+
+ Its possible that we have over mapped system memory in the regions and
+ we want to avoid depending on the order of the regions.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ff4e66e93c1ad47644be3b4ffd6a46e1ce9b6612
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Feb 6 09:49:31 2009 -0600
+
+ pci: Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY for clarity
+
+ The PCI_REGION_MEMORY and PCI_REGION_MEM are a bit to similar and
+ can be confusing when reading the code.
+
+ Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY to clarify its used
+ for system memory mapping purposes.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 54dc517328709c204a9cbf7a253d9f8e6c4b26ec
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Sun Feb 8 00:59:43 2009 +0300
+
+ mx31: add GPIO registers definitions
+
+ Added definitions for i.MX31 processor GPIO registers.
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 8da601280a8acbc3385784780ed35130e53812f1
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Feb 4 13:47:22 2009 -0600
+
+ NAND: Add timeout for reset command
+
+ Without the timeout present an infinite loop can occur if the
+ NAND device is broken or not present.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 10dc6a9bef73d7d4cb25b3fde27ee91f8484b126
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Feb 4 13:39:40 2009 -0600
+
+ NAND: Silence warning when CONFIG_SYS_NAND_QUIET_TEST
+
+ Commit cfa460adfdefcc30d104e1a9ee44994ee349bb7b removed support
+ for disabling the "No NAND device found!!!" warning when
+ CONFIG_SYS_NAND_QUIET_TEST was defined. This re-adds support
+ for silencing the warning.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit ad09ab2e3ac28f304372eceb4a5cb4d24e102a13
+Author: Valeriy Glushkov <gvv@lstec.com>
+Date: Mon Jan 19 16:32:59 2009 +0200
+
+ NAND: Fixed invalid pointers to static relocated chip names
+
+ Dear Wolfgang,
+
+ You are right, the patch was ugly.
+ The new one seems to be better.
+
+ Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit e7deec1bf6fa3b3a21cd8d14fe2a909a42efc9d8
+Author: Nishanth Menon <nm@ti.com>
+Date: Mon Feb 2 18:20:12 2009 -0600
+
+ ARM:OMAP3:Zoom1: Add nand unlock option
+
+ Enable NAND_UNLOCK option for unlocking nand for
+ erase/write operations
+
+ Signed-off-by: Nishanth Menon <nm@ti.com>
+
+commit 5a9427dc9b8438759db3f67a1e547062f76eb18d
+Author: derek@siconix.com <derek@siconix.com>
+Date: Mon Jan 26 14:08:17 2009 -0700
+
+ env_nand: fix env memory release
+
+ This fixes a bug that tmp environment memory not being released.
+
+ Signed-off-by: Derek Ou <dou@siconix.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 05fd88776419df59e7f37bac063a209409dd801d
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Fri Feb 6 10:37:45 2009 +0100
+
+ ARM: remove unused variable
+
+ The "size" variable in start_armboot() in lib_arm/board.c is only really
+ used in "#ifndef CONFIG_SYS_NO_FLASH" case, and even there it can be
+ eliminated (thanks to Jean-Christophe PLAGNIOL-VILLARD for a suggestion.)
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 6989e4f546d960a407dd5425f800dff9751c8132
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Thu Feb 5 09:33:50 2009 -0500
+
+ Coldfire: M527x: Add missing GPIO register address defines
+
+ Add missing GPIO registers address definition for Coldfire M5271.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit c4ff77f5e6c3a01610ce97434c0d59acb1476f95
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Fri Jan 23 14:42:58 2009 -0500
+
+ Coldfire: mcfmii: Allow non-autonegotiating PHYs to use mii command
+
+ Modified mii_init to support boards with PHYs that are not set to
+ autonegotiate, but still want to use u-boot's mii commands to probe
+ the smi bus. Such PHYs will not set the Autonegotiate-done bit.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit 92d3e6e0ffcbb7224c83104f8d87b5b4bf39a38f
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Fri Jan 23 11:44:30 2009 -0500
+
+ Coldfire: Applied baudrate formula of serial_init to serial_setbrg
+
+ Applied the patch for baudrate divider value truncation for
+ serial_init to serial_setbrg as well.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit 8706ef378f2db1ef65b9c2f909561f23e3dc2148
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Fri Jan 23 14:07:05 2009 -0500
+
+ Coldfire: M5271EVB: Board header update (dependencies)
+
+ Cleanup for M5271EVB:
+ Added clarification on the use of CONFIG_SYS_CLOCK.
+ Modified to use u-boot's HUSH parser.
+ Cleanup on environment settings.
+ Removed compiler warning by defining CONFIG_SYS_CS0_*
+
+ Dependencies:
+ Added the use of CONFIG_SYS_MCF_SYNCR for clock multiplier.
+ This depends on a patch to include/asm-m68k/m5271.h
+ that defines the multiplier and divider ratios.
+
+ Removed the definition of CONFIG_SYS_FECI2C.
+ This depends on a patch that removes the use of it in
+ cpu/mcf52x2/cpu_init.c
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit e0db344fabfeb4f9649846f94838f51172f6a1f6
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Thu Jan 29 14:36:06 2009 -0500
+
+ Coldfire: M5271: Allow board header file to specify clock multiplier
+
+ M5271 dynamic clock multiplier. It is currently fixed at 100MHz.
+
+ Allow the board header file to set their own multiplier and divider.
+ Added the #define for the multiplier and divider to the cpu header file.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit d1ef25dd81c79dcfad5c2ff0162b1bea21d04bc3
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Fri Jan 23 10:47:13 2009 -0500
+
+ Coldfire: M5271EVB: Remove usage of CONFIG_SYS_FECI2C
+
+ Discontinue the use of CONFIG_SYS_FECI2C (only used by M5271EVB).
+ Use read-modify-write to activate the FEC pins without disabling I2C.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit ee73cc59ab904976af3c33b454fc84f78618b2d1
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Fri Jan 23 09:45:34 2009 -0500
+
+ Coldfire: cmd_bdinfo cleanup
+
+ CONFIG_M68K bdinfo cleanup:
+
+ Fixed compiler warning about baudrate printing.
+ format '%d' expects type 'int', but argument 2 has type 'long unsigned int'.
+
+ Added printing of "cpufreq"
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit 4ffc39050aa46ed8a3d29732293dff769e54fffa
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Fri Jan 23 09:27:00 2009 -0500
+
+ Coldfire: Fix half-baud UART by adding M5271 to Coldfire v2 core list
+
+ Added the CONFIG_M5271 to the list of Coldfire V2 processor. This
+ was causing the bus clock (not CPU clock) to be declared twice as
+ fast as it actually is. This causes UARTS to operate at half the
+ specified baudrate.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit 59d1bda7f92c8a28c3aba94e48063749d425949f
+Author: Dirk Eibach <eibach@gdsys.de>
+Date: Tue Feb 3 15:15:21 2009 +0100
+
+ ppc4xx: Make PCIE support selectable
+
+ On some platforms PCIE support is not required, but would be included
+ because the cpu supports it. To reduce fooprint it is now configurable
+ via CONFIG_PCI_DISABLE_PCIE.
+
+ Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b129eff5ede394cc1faeb6dbf6a987e91abce552
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Feb 3 22:13:16 2009 +0100
+
+ ppc4xx: Only fixup opb attached UARTs
+
+ This patch updates the fdt UART clock fixup code to
+ only touch CPU internal UARTs on 4xx systems.
+ Only these UARTs are definitely clocked by gd->uart_clk.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4b7e3d045cc82f7f7b6f3a19b54a814da36ac52c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Jan 13 11:00:29 2009 -0500
+
+ Blackfin: move default boot SPI CS to common code
+
+ Move the default SPI CS that we boot from into common code so that it can
+ be used in other SPI drivers and environment settings.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit f790ef6ff12381cb0e43de54fb2b0f1204ad8ed6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Dec 10 12:33:54 2008 -0500
+
+ Blackfin: dynamically update UART speed when initializing
+
+ Previously, booting over the UART required the baud rate to be known ahead
+ of time. Using a bit of tricky simple math, we can calculate the new board
+ rate based on the old divisors.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
+
+commit 97f265f14f23050f3cb997f617f3a6917b843ea2
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Dec 9 17:21:08 2008 -0500
+
+ Blackfin: add support for fast SPI reads with Boot ROM
+
+ Newer Blackfin boot roms support using the fast SPI read command rather than
+ just the slow one. If the functionality is available, then use it.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 67619982bfc5cd62710a48e3cbffc304cb78c341
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:46:52 2008 -0400
+
+ Blackfin: check for reserved settings in DDR MMRs
+
+ Some bits of the DDR MMRs should not be set. If they do, bad things may
+ happen (like random failures or hardware destruction).
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 622a8dc0958dd599743348ea94eb10b9d0be8ae6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:54:00 2008 -0400
+
+ Blackfin: set default voltage levels for BF538/BF539 parts
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 09dc6b0bbd1d5e39cdddeebc059f9a75630e4f6f
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 1 01:29:57 2008 -0400
+
+ Blackfin: use on-chip syscontrol() rom function when available
+
+ Newer Blackfin's have an on-chip rom with a syscontrol() function that needs
+ to be used to properly program the memory and voltage settings as it will
+ include (possibly critical) factory tested bias values.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit e1fb6d0d52fbe3fbc1a4c651dacf11e9c1417f63
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Feb 5 11:44:52 2009 +0100
+
+ cfi_flash: Fix typo in cfi_flash.c
+
+ Patch "flash/cfi_flash: Use virtual sector start address, not phys"
+ introduced a small typo and compilation warning for systems with CFI
+ legacy support (e.g. hcu4). This patch fixes it.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 28745db969b72693754991c838f68a7fb4a8b1ab
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jan 29 11:21:38 2009 +0100
+
+ jedec_flash: Only use manufacturer defines from common flash.h
+
+ This patch removes the double defined manufacturer defines from
+ jedec_flash.c. Since the common defines in flash.h are 32bit
+ we now need the (16) cast. This patch also removes the compilation
+ warning (e.g. seen on hcu5):
+
+ ./MAKEALL hcu5
+ Configuring for hcu5 board...
+ jedec_flash.c:219: warning: large integer implicitly truncated to unsigned type
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ec21d5cfcb6b4e7fcdd5c6e926e1a824900706f2
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Feb 5 11:25:57 2009 +0100
+
+ cfi_flash: Silence compilation warning
+
+ Patch "flash/cfi_flash: Use virtual sector start address, not phys"
+ introduced a small compilation warning. This patch fixes it.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 09ce9921a7d8b1ce764656b14b42217bbf4faa38
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Mon Feb 2 16:34:51 2009 -0600
+
+ flash/cfi_flash: Use virtual sector start address, not phys
+
+ include/flash.h was commented to say that the address in
+ flash_info->start was a physical address. However, from u-boot's
+ point of view, and looking at most flash code, it makes more
+ sense for this to be a virtual address. So I corrected the
+ comment to indicate that this was a virtual address.
+
+ The only flash driver that was actually treating the address
+ as physical was the mtd/cfi_flash driver. However, this code
+ was using it inconsistently as it actually directly dereferenced
+ the "start" element, while it used map_physmem to get a
+ virtual address in other places. I changed this driver so
+ that the code which initializes the info->start field calls
+ map_physmem to get a virtual address, eliminating the need for
+ further map_physmem calls. The code is now consistent.
+
+ The *only* place a physical address should be used is when defining the
+ flash banks list that is used to initialize the flash_info struct,
+ usually found in the board config file.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 657f2062d8e17ebf4a55f52c9e71c07c0c94c779
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Feb 4 09:42:20 2009 +0100
+
+ Fix compiler warning
+
+ (shows up only when DEBUG is enabled)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 47832cd15ae02fb6fde8ebed5b272f85775f2ceb
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 03:45:55 2008 -0400
+
+ Blackfin: update anomaly lists
+
+ Update the anomaly lists to match latest anomaly sheets.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 70a4da45e16b72e8e5b0baaecdaee9be8619647d
+Author: Ralph Kondziella <rk@argos-messtechnik.de>
+Date: Mon Jan 26 12:34:36 2009 -0700
+
+ ADS5121 Add PATA support
+
+ Original patch from Ralph Kondziella
+ plus clean up by Wolfgang Denk
+ plus changes by John Rigby
+ use ips clock not lpc
+ port forward to current u-boot release
+
+ Signed-off-by: Ralph Kondziella <rk@argos-messtechnik.de>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit abfbd0ae4967df18102345db4f4b529a13da107b
+Author: Martha Marx <mmarx@silicontkx.com>
+Date: Mon Jan 26 10:45:07 2009 -0700
+
+ ADS5121 Add IC Ident Module (IIM) support
+
+ IIM (IC Identification Module) is the fusebox for the mpc5121.
+ Use #define CONFIG_IIM to turn on the clock for this module
+ use #define CONFIG_CMD_FUSE to add fusebox commands.
+ Fusebox commands include the ability to read
+ the status, read the register cache, override the register cache,
+ program the fuses and sense them.
+
+ Signed-off-by: Martha Marx <mmarx@silicontkx.com>
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit 14d19cd1bce9a24b1335598f1568140f4950e4d9
+Author: John Rigby <jrigby@freescale.com>
+Date: Fri Jan 23 10:33:15 2009 -0700
+
+ ADS5121 Fix rev2 silicon pci iopad config
+
+ Reset config is not correct
+
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit 4c154252c480b13f69ce1b71a9530b0515da76a6
+Author: John Rigby <jrigby@freescale.com>
+Date: Wed Nov 19 13:57:34 2008 -0700
+
+ ADS5121 DIU Add diu_bmp_addr env
+
+ Add support for using a bmp other than
+ FSL_Logo_BMP for the DIU splash screen.
+
+ Can now set the env var "diu_bmp_addr" to
+ the address of a BMP in flash to use instead
+ of the default FSL_Logo_BMP.
+
+ Signed-off-by: Martha Marx <mmarx@silicontkx.com>
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit 92c20fbd3a7788c1a154f50a3f44f28a7763f99a
+Author: John Rigby <jrigby@freescale.com>
+Date: Thu Oct 30 16:39:35 2008 -0600
+
+ ADS5121 DIU Make inclusion of FSL logo optional
+
+ Make inclusion of FSL logo optional and
+ turn it off by default.
+
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit bd99ec149abe94e7f6b2bda4766d701b4005053f
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Sun Feb 1 12:27:53 2009 +0100
+
+ Compile warning fix in onenand_uboot.h
+
+ Regression since merge window after 2009.01
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit a270d1e7295c3d829f42c0480117941dfc1c6477
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jan 29 06:33:55 2009 +0100
+
+ USB: Add EHCI support for VCT EHCI controller (really with driver now)
+
+ Somehow I missed the real driver part in my last patch version. This patch
+ now adds the driver.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 716ebf436c9e43df6740e0172f6b2a81ddbf1b8e
+Author: Cliff Cai <cliff.cai@analog.com>
+Date: Sat Nov 29 18:22:38 2008 -0500
+
+ Blackfin: add driver for on-chip MMC/SD controller
+
+ This is a port of the Linux Blackfin on-chip SDH driver to U-Boot.
+
+ Signed-off-by: Cliff Cai <cliff.cai@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 6e87ea0ca951465eba144ab2e6dba6fb507737a2
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 22:47:34 2008 -0400
+
+ Blackfin: add port muxing for BF51x SPI
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit fc68f9f85959664d528daea2aef5ef54974331ce
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Jan 6 06:16:19 2009 -0500
+
+ Blackfin: output booting source when booting
+
+ Knowing the booting source of the part is useful, especially when the part
+ can switch dynamically between sources.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8df3ce0f49c37947800ac7c84e751499882619fc
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Dec 11 06:30:46 2008 -0500
+
+ Blackfin: set default CONFIG_ENV_SPI_CS based on bootrom
+
+ Set the default CONFIG_ENV_SPI_CS value to match the SPI CS that is used by
+ the Blackfin on-chip bootrom to boot out of SPI flash.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2b4a486e6fac502d8b883e344cc4012283945b3d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Dec 11 04:06:26 2008 -0500
+
+ Blackfin: update asm-blackfin/posix_types.h to latest Linux version
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit e5eb93e77391bcc308697116c544ea1340aaae8a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Dec 6 02:54:52 2008 -0500
+
+ Blackfin: add port I bits
+
+ Some people need to access port I, so make sure the pins are defined.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8a6b272596d43de0db4943eac7af58c3534c4026
+Author: Sonic Zhang <Sonic.Zhang@analog.com>
+Date: Wed Nov 26 22:16:45 2008 -0500
+
+ Blackfin: add driver for on-chip ATAPI controller
+
+ This is a port of the Linux Blackfin on-chip ATAPI driver to U-Boot.
+
+ Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit be9d8c780e6831cb84b7d4590ceae03dca8fc10b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Nov 26 21:43:06 2008 -0500
+
+ Blackfin: add driver for on-chip NAND controller
+
+ This is a port of the Linux Blackfin on-chip NFC driver to U-Boot.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 4148e02abae9a099f4444b5e168ebc2b911d2295
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Nov 12 07:18:15 2008 -0500
+
+ Blackfin: build with -mno-fdpic
+
+ Use the -mno-fdpic flag so that any Blackfin toolchain can be used to build
+ up u-boot, including ones that output FDPIC ELF by default.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 70e95589a24a2d83ad00317e4a9611d0211ecb58
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Nov 11 05:43:57 2008 -0500
+
+ Blackfin: fix up EBIU defines
+
+ The EBIU defines for EBSZ 256/512 were incorrect.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 961954ea0ec8dc4341034c1a1ff3107ec0527809
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Nov 5 12:45:24 2008 -0500
+
+ Blackfin: use 8/16/32 bit transfer widths in dma_memcpy()
+
+ Rather than using 8bit transfers for everything, use 8/16/32 bit transfers
+ as usable with the source/destination addresses and the count size.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b93c68648426f906d63b98117496b6415f505f39
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Nov 5 08:50:23 2008 -0500
+
+ Blackfin: only flag L1 instruction for DMA memcpy
+
+ The performance difference from doing an 8 bit DMA memcpy vs an optimized
+ core memcpy can be pretty big when you add in the overhead of setting up the
+ MDMA registers, cache flushes, etc... So only use dma_memcpy() when we
+ actually require it.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit e347c092a3b3a2ce1e72f25f4829163634d09fbe
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Nov 5 07:20:37 2008 -0500
+
+ Blackfin: dma_memcpy(): fix random failures
+
+ We have to make sure the DMA channel is actually disabled in hardware before
+ attempting to reprogram it. Otherwise the new settings are ignored and we
+ end up with random hangs/failures.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit fdce83c108846d6f0d5b1774e1cc29f2573a6ad3
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Nov 4 00:04:03 2008 -0500
+
+ Blackfin: rewrite cache handling functions
+
+ Take the cache flush functions from the kernel as they use hardware loops in
+ order to get optimal performance.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 84c5f0dc47d17593fd81206614891bdc94f6d51c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Nov 3 22:30:05 2008 -0500
+
+ Blackfin: setup bi_enetaddr for single nets
+
+ For systems with CONFIG_NET_MULTI disabled, bi_enetaddr does not get setup
+ based on $ethaddr, so set it up.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 40599239e7875b39e2a5c12e6545992041c72c52
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Oct 24 22:48:47 2008 -0400
+
+ Blackfin: cache core/system clock values
+
+ Calculating the clocks requires a bit of calls to gcc math functions, so
+ cache the values after the first run since they'll most likely never
+ change once U-Boot is up and running.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 6957a6209b02f6b69607fc47425f13731cc477f1
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Oct 24 18:18:16 2008 -0400
+
+ Blackfin: enable --gc-sections
+
+ Start building all Blackfin boards with -ffunction-sections/-fdata-sections
+ and linking with --gc-sections.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit ee1d2001ea7fbabb2b9256026dc5468f057337f8
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 20 21:08:54 2008 -0400
+
+ Blackfin: dont check baud if it wont actually get used
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 400f5778f375bc99c73c8488c555def261ccfab7
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Oct 14 07:54:09 2008 -0400
+
+ Blackfin: add driver for on-chip SPI controller
+
+ This fills out the SPI backend for the Blackfin on-chip SPI peripheral.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 7a1e87b1062e6eac0704c6fc2f7c661caf8814cd
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 18 05:33:51 2008 -0400
+
+ Blackfin: only build post code when CONFIG_POST
+
+ Save some time by using CONFIG_POST in the Makefile rather than C files.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 6d7d4803c74bb86e1b401b1199e63381a62b9382
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Jan 8 11:57:57 2009 -0500
+
+ Blackfin: bfin_mac: cleanup pointer/casts for aliasing issues
+
+ Redo how pointers are managed to get rid of ugly casts and strict pointer
+ aliasing issues that are highlighted by gcc 4.3.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 092d2487baf7c29343c165e3ae82ea8a7f9e679b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Dec 9 17:46:21 2008 -0500
+
+ Blackfin: bfin_mac: convert CONFIG_BFIN_MAC_RMII to CONFIG_RMII
+
+ No point in having a Blackfin-specific define "CONFIG_BFIN_MAC_RMII" that
+ does exactly the same thing as common "CONFIG_RMII".
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 8eed6ca51e50fade6887e8bdb1ff6a44116b42b5
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Nov 5 06:36:15 2008 -0500
+
+ Blackfin: bfin_mac: use common debug()
+
+ Rather then defining our own DEBUGF(), just use the common debug().
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit a7ec6ac8b2c6dce6fc670a2a855deb6eee340e04
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 20 13:59:51 2008 -0400
+
+ Blackfin: bfin_mac: respect CONFIG_PHY_{ADDR,CLOCK_FREQ}
+
+ Rather than having the on-chip MAC hardcoded to phy address 1 and a speed
+ of 2.5mhz, use these as defaults if the board doesn't specify otherwise.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit ac45af4e63ea925f4accc98453aab1a1166c196d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Oct 14 04:52:00 2008 -0400
+
+ Blackfin: bfin_mac: cleanup MII/PHY functions
+
+ Cleanup and rewrite the MII/PHY related functions so that we can reuse the
+ existing common linux/miiphy.h code and hook into the `mii` command.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 6b310a05f0d10c751f22468040932139f71c71d3
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Oct 14 00:31:30 2008 -0400
+
+ Blackfin: bfin_mac: set MDCDIV based on SCLK
+
+ Rather than hardcoding MDCDIV to 24 (which is correct for ~125mhz SCLK),
+ use the real algorithm so it gets set correctly regardless of SCLK.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 930590f3e49c8f32256edf2e5861e1535a329c6c
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jan 31 09:10:48 2009 +0100
+
+ ixp: move serial to drivers/serial
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f90c8022f448bc5e93090e4b714368e52e912f0f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jan 31 09:04:58 2009 +0100
+
+ ixp: move pci init in arm/board instead of cpu
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 8cb79b5f275f1888ccb278a2d2197140444a84b7
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jan 31 08:56:49 2009 +0100
+
+ ixp: move pci drivers to drivers/pci
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 012d5bab09a534e4800b02f50cf508e6837202ea
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jan 31 08:53:44 2009 +0100
+
+ ixp: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f693f501d67434df1f815fd1824a71973ae08207
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jan 31 08:53:44 2009 +0100
+
+ ixp: add missing os define
+
+ need by arm-elf toolchains and no impact on the arm-linux one
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit b4e2f89dfcb206a22d34fa6b34878d85b498b39f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jan 31 09:53:39 2009 +0100
+
+ ixp: remove the option to include the Microcode
+
+ instead the board will have to load it from flash or ram
+ which will be specified by npe_ucode env var
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1b017baf2071d8daf643bce87250db898c606c66
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Jan 30 09:45:23 2009 +0100
+
+ ixp/npe: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 4e69087a1d6ef2eca6f46026cf5e7399b6c9e7c0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Jan 28 21:58:04 2009 +0100
+
+ SX1: add hardware V2 support
+
+ In the V2 the 2 flash has been replace by one 32MB flash
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f877f2233dbcd7417c2f0babe6a849099b167f3c
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Jan 28 21:58:03 2009 +0100
+
+ SX1: Fix second flash mapping
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 47fd3bffed6430c91eb2660f859574ed98be5bd8
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Jan 28 21:58:03 2009 +0100
+
+ SX1: add CONFIG_STDOUT_USBTTY to enable preboot stdout redirect to usbtty
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit cfca33837ec83829c6a49c3bcc86c31bc2495ff6
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Jan 28 21:57:59 2009 +0100
+
+ move Samsung's board to board/samsung
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e4943ec57466ea5dfa085e7a9e0ec44cb93c4e1e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Jan 29 12:07:21 2009 +0100
+
+ move ARM Ltd. to vendor dir
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit a87fb1b308a2a375cb9ca74ca0dd3e2c5793d3bf
+Author: Larry Johnson <lrj@acm.org>
+Date: Wed Jan 28 15:30:37 2009 -0500
+
+ ppc4xx: Clean up configuration file for Korat board
+
+ This patch updates the default environmental variables for the
+ Korat PPC 440EPx board, and makes additional minor fixes.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f20405e31680efc36293c59b4963db57c9d93df4
+Author: Larry Johnson <lrj@acm.org>
+Date: Wed Jan 28 15:30:02 2009 -0500
+
+ ppc4xx: Add variable "korat_usbcf" for Korat board
+
+ The new environment variable "korat_usbcf" selects the USB
+ port used by the Korat board's CompactFlash controller.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit fc01ea1e27d5b124f0a1868d0ce569f156d58dfe
+Author: Gunnar Rangoy <gunnar@rangoy.com>
+Date: Fri Jan 23 12:56:31 2009 +0100
+
+ AVR32: macb - Search for PHY id
+
+ This patch adds support for searching through available PHY-addresses in
+ the macb-driver. This is needed for the ATEVK1100 evaluation board,
+ where the PHY-address will be initialized to either 1 or 7.
+
+ This patch adds a config option, CONFIG_MACB_SEARCH_PHY, which when
+ enabled tells the driver to search for the PHY address.
+
+ Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
+ Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
+ Signed-off-by: Olav Morken <olavmrk@gmail.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit af8626e0c08a780d9ded1d9c4883a89355f60e75
+Author: Olav Morken <olavmrk@gmail.com>
+Date: Fri Jan 23 12:56:26 2009 +0100
+
+ Fix IP alignment problem
+
+ This patch removes volatile from:
+ volatile IP_t *ip = (IP_t *)xip;
+
+ Due to a bug, avr32-gcc will assume that ip is aligned on a word boundary when
+ using volatile, which causes an exception since xip isn't aligned on a word
+ boundary.
+
+ Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
+ Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
+ Signed-off-by: Olav Morken <olavmrk@gmail.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 12a8b9db12f82a189ff143a58731007f5469da61
+Author: Ron Madrid <ron_madrid@sbcglobal.net>
+Date: Wed Jan 28 16:17:21 2009 -0800
+
+ Marvell 88E1118 interrupt fix
+
+ This patch adjusts the LED control so that interrupt lines are not reading LEDs
+ and effectively causing indefinite interrupts to the controller.
+
+ Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 9a37f2acc31a3296dddd3574ea9eaf7f319807b9
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 21 17:14:26 2009 +0100
+
+ net: smc911x.c: Add LAN9211 to chip_ids[] array
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 75edebe3011c963a7cd84be0f4a987477f2aaf89
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Jan 27 16:53:39 2009 -0500
+
+ Move is_valid_ether_addr() to include/net.h
+
+ Import the is_valid_ether_addr() function from the Linux kernel.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 268859338c0188eab1d0d3b867b7dad3c5cc734a
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Jan 5 12:25:13 2009 +0100
+
+ net: Sort Makefile labels
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 1fbcbe9a95f39afb2df6ab8cba25b284b47ebfb2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 28 23:06:42 2009 +0100
+
+ 85xx: Fix compile breakage with sbc8540 and sbc8560
+
+ This fixes an error which raises just a warning:
+ sbc8560.c:250: warning: passing argument 2 of 'strmhz' makes integer from pointer without a cast
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 62625c0b081bd4019cecab14e9fc2e05e48d2a58
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Jan 28 13:48:55 2009 -0500
+
+ SPD823TS: do not define CONFIG_CMD_ENV
+
+ Since the SPD823TS board does not actually have any writable flash to save
+ its environment, undefine CONFIG_CMD_ENV so the "saveenv" command is
+ disabled.
+
+ This fixes the build error:
+ common/libcommon.a(cmd_nvedit.o): In function `do_saveenv':
+ common/cmd_nvedit.c:557: undefined reference to `saveenv'
+ make: *** [u-boot] Error 1
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 7379f45a7bc71941c3920c2f6b3c3faa4d7fd315
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Wed Jan 28 21:40:16 2009 +0100
+
+ OMAP3: Add Zoom1 board support
+
+ Support for Zoom MDK with OMAP3430. Details of Zoom MDK available here:
+ http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit
+
+ Signed-off-by: Nishanth Menon <nm@ti.com>
+ Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
+
+commit 2be2c6cc674e26237962f5cf4c0d311e139e4241
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Wed Jan 28 21:39:58 2009 +0100
+
+ OMAP3: Add Pandora support
+
+ Add Pandora support.
+
+ Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+ Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
+
+commit ad9bc8e52d174d699d1367be0b90089e4fdeb933
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Wed Jan 28 21:39:58 2009 +0100
+
+ OMAP3: Add EVM board
+
+ Add EVM board support.
+
+ Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+ Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
+
+commit 9d0fc8110e7e755239329c26f300d5fc9946d3ec
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Wed Jan 28 21:39:57 2009 +0100
+
+ OMAP3: Add Overo board
+
+ Add Overo board support.
+
+ Signed-off-by: Steve Sakoman <sakoman@gmail.com>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+ Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
+
+commit f904cdbb68167c647887f19929ad295dbaac8862
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Tue Jan 27 18:19:12 2009 +0100
+
+ OMAP3: Add common power code, README, and BeagleBoard
+
+ Add BeagleBoard support, common power code and README.
+
+ Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 9cda4f104b5313fadc21b75aa781c7a6aaf6ea60
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jan 28 08:31:10 2009 -0600
+
+ 85xx: Fix compile breakage with MPC8540EVAL
+
+ Configuring for MPC8540EVAL board...
+ mpc8540eval.c: In function 'checkboard':
+ mpc8540eval.c:53: error: invalid operands to binary /
+ make[1]: *** [mpc8540eval.o] Error 1
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 1a448db77b10153703bc5e4ad13dd55d88beb1d6
+Author: Bryan Wu <bryan.wu@analog.com>
+Date: Sun Jan 18 23:04:27 2009 -0500
+
+ usb_scan_devices: fix output with no devices
+
+ We should check the return of usb_new_device() so that if no USB device is
+ found, we print out the right message rather than always saying "new usb
+ device found".
+
+ Signed-off-by: Bryan Wu <bryan.wu@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit f1c1f540243438246aefb703fdcf16957e3a72e1
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jan 22 10:11:21 2009 +0100
+
+ USB: Add high-speed (480Mb/s) to all USB related outputs
+
+ With this patch the USB related connection speed output ("usb tree" command and
+ debug output) is now high-speed enabled.
+
+ This patch also fixes a compilation warning when debugging is enabled.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit daa2dafb450a8073a4e42fd46cd4e995b208e4cb
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 21 17:12:19 2009 +0100
+
+ USB: Add dcache support to the EHCI driver
+
+ This patch adds routines to handle (flush/invalidate) the dcache for the
+ QH and qTD structures and data buffers. This is needed on platforms using
+ this EHCI support with dcache enabled (like the MIPS VCT board port).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 4e0ea0efc1e501186aca8577a4042fc6fa641602
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 21 17:12:28 2009 +0100
+
+ USB: Add EHCI support for VCT EHCI controller
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 832e61418eedfea172bd2fdfd0ea0d199cc70a9d
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 21 17:12:10 2009 +0100
+
+ USB: Add config option to call ehci_hcd_init() again after EHCI reset
+
+ This patch adds the config option CONFIG_EHCI_HCD_INIT_AFTER_RESET
+ to call ehci_hcd_init() again after ehci_reset() is executed. This
+ is needed for the upcoming VCT EHCI support which needs to re-init
+ the hcd part again after the EHCI CMD_RESET is executed.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 597eb28bd9691266b7b804364cda577cdb51d106
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 21 17:12:01 2009 +0100
+
+ USB: Fix speed detection on EHCI cntr with root hub transaction translators
+
+ This patch fixes an issue that the speed of USB devices was not detected
+ correctly on some EHCI controllers. This will be used on the upcoming VCT
+ EHCI support.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 20cc06611ea33fc0a67a5e56e6476379d2de3091
+Author: Thomas Abraham <t-abraham@ti.com>
+Date: Sun Jan 4 09:41:20 2009 +0530
+
+ usb : musb : Enabling USB MSC support for DM6446 (TI DaVinci) platform
+
+ Enabling USB MSC support for DM6446 (TI DaVinci) platform in the
+ configuration file.
+
+ Signed-off-by: Ravi Babu <ravibabu@ti.com>
+ Signed-off-by: Swaminathan S <swami.iyer@ti.com>
+ Signed-off-by: Thomas Abraham <t-abraham@ti.com>
+ Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 538ef967715322f64ee08efa2296d9682111b014
+Author: Thomas Abraham <t-abraham@ti.com>
+Date: Sun Jan 4 09:41:16 2009 +0530
+
+ usb : musb : Enabling DM6446 (TI DaVinci) USB module power
+
+ Enabling DM6446 (TI DaVinci) USB module power and MUSB low-level
+ controller hook up to USB core layer.
+
+ Signed-off-by: Ravi Babu <ravibabu@ti.com>
+ Signed-off-by: Swaminathan S <swami.iyer@ti.com>
+ Signed-off-by: Thomas Abraham <t-abraham@ti.com>
+ Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit e142e9f35f8ec61e74bf8019428b003f5070c33b
+Author: Thomas Abraham <t-abraham@ti.com>
+Date: Sun Jan 4 09:41:13 2009 +0530
+
+ usb : musb : Adding DM6446 (TI DaVinci) platform specific USB support
+
+ Adding DM6446 (TI DaVinci) platform specific USB functionality for
+ USB Phy and VBUS initialization.
+
+ Signed-off-by: Ravi Babu <ravibabu@ti.com>
+ Signed-off-by: Swaminathan S <swami.iyer@ti.com>
+ Signed-off-by: Thomas Abraham <t-abraham@ti.com>
+ Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit a9d39ebe91ecdd5ac0a0cf56ea162a19773db8da
+Author: Thomas Abraham <t-abraham@ti.com>
+Date: Sun Jan 4 09:41:09 2009 +0530
+
+ usb : musb : Adding USB VBUS enable functionality for DM644x DVEVM
+
+ Adding USB VBUS enable functionality for DM644x DVEVM (TI DaVinci)
+ platform.
+
+ Signed-off-by: Ravi Babu <ravibabu@ti.com>
+ Signed-off-by: Swaminathan S <swami.iyer@ti.com>
+ Signed-off-by: Thomas Abraham <t-abraham@ti.com>
+ Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit a142896934c755e679ba87e227a8e449f39b0012
+Author: Thomas Abraham <t-abraham@ti.com>
+Date: Sun Jan 4 09:41:03 2009 +0530
+
+ usb : musb : Adding host controller driver for Mentor USB controller
+
+ Adding Mentor USB core functionality and Mentor USB Host controller
+ functionality for Mentor USB OTG controller (musbhdrc).
+
+ Signed-off-by: Ravi Babu <ravibabu@ti.com>
+ Signed-off-by: Swaminathan S <swami.iyer@ti.com>
+ Signed-off-by: Thomas Abraham <t-abraham@ti.com>
+ Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit c7d703f3f3c3d6b020bda4cf633f8a6167c3cd2a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Jan 1 18:27:27 2009 -0500
+
+ usb.h: use standard __LITTLE_ENDIAN from Linux headers
+
+ Rather than forcing people to define a custom "LITTLEENDIAN", just use the
+ __LITTLE_ENDIAN one from the Linux byteorder headers that every arch is
+ already setting up.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 7b6e31eb17e3ff76238a60803fc531517d516223
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date: Wed Dec 31 10:33:56 2008 +0100
+
+ USB ehci ixp4xx support
+
+ Add USB ehci ixp4xx host controller. Test on ixdp465 board.
+
+ Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 1ed9f9adc88218841dfeb60b9094a5a548bff009
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date: Wed Dec 31 10:33:22 2008 +0100
+
+ USB ehci remove infinite loop and use handshake function
+
+ USB ehci code cleanup. Use handshake instead of infinite while loop
+ to check the STD_ASS status
+
+ Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 8fea2914ac974029b65926ef8247d908f84d202d
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date: Wed Dec 31 10:32:41 2008 +0100
+
+ Add initial support for USB ehci pci
+
+ Add USB ehci pci support. This patch doesn't include any
+ pci_ids and it is not tested on real hardware.
+
+ Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 14e4111cdab7e7738ff6a203d445e4d8377f058f
+Author: Bryan Wu <Bryan.Wu@analog.com>
+Date: Thu Jan 1 19:48:07 2009 -0500
+
+ usb_storage: do not reset SanDisk Corporation U3 Cruzer Micro USB thumb drive
+
+ The SanDisk Corporation U3 Cruzer Micro 1/4GB Flash Drive 000016244373FFB4
+ does not like to be reset, so check for it.
+
+ Signed-off-by: Bryan Wu <bryan.wu@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 1eb734fed3b79a5e6106dad16e88041894fdab30
+Author: Thomas Abraham <t-abraham@ti.com>
+Date: Sun Jan 4 12:15:35 2009 +0530
+
+ usb : usb_kbd : Populating 'priv' member of USB keyboard device_t structure
+
+ This patch populates the 'priv' field of the USB keyboard device_t
+ structure. The 'priv' field is populated with the address of the
+ 'struct usb_device' structure that represents the USB device.
+
+ The 'priv' field can then be used in the 'usb_event_poll' function to
+ determine the USB device that requires to be polled. An
+ example of its usage in 'usb_event_poll' function is as below.
+
+ device_t *dev;
+ struct usb_device *usb_kbd_dev;
+
+ <snip>
+
+ dev = device_get_by_name("usbkbd");
+ usb_kbd_dev = (struct usb_device *)dev->priv;
+ iface = &usb_kbd_dev->config.if_desc[0];
+
+ Signed-off-by: Thomas Abraham <t-abraham@ti.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 366523c26b6320af171459b19e6e0e9e3baa83ca
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date: Thu Dec 18 10:05:37 2008 +0100
+
+ USB change speed
+
+ USB changes the speed according to the port status
+
+ Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit c0d722fe7ee1cb452dfd9246419188b3f6d9c4df
+Author: Remy Böhmer <linux@bohmer.net>
+Date: Sat Dec 13 22:51:58 2008 +0100
+
+ EHCI fix code and ixp4xx test.
+ USB ehci configuration parameter:
+
+ #define CONFIG_CMD_USB 1
+ #define CONFIG_USB_STORAGE 1
+ #define CONFIG_USB_EHCI
+ #define CONFIG_USB_EHCI_IXP4XX 1
+ #define CONFIG_EHCI_IS_TDI 1
+ #define CONFIG_EHCI_DESC_BIG_ENDIAN 1
+ #define CONFIG_EHCI_MMIO_BIG_ENDIAN 1
+ #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
+ #define CONFIG_LEGACY_USB_INIT_SEQ 1
+
+ 2 USB Device(s) found
+ scanning bus for storage devices... 0 Storage Device(s) found
+ => usb tree
+
+ Device Tree:
+ 1 Hub (1.5MBit/s, 0mA)
+ | u-boot EHCI Host Controller
+ |
+ |+-2 Mass Storage (12MBit/s, 100mA)
+ Sony Storage Media 0C07040930296
+
+ =>
+
+ Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit 51ab142b8b546d5e627b2c8c36d0adae222565f7
+Author: michael <michael@panicking.retis>
+Date: Thu Dec 11 13:43:55 2008 +0100
+
+ [PATCH] This patch add varius fix to the ehci.
+ - fix ehci_readl, ehci_writel
+ - introduce new define in ehci.h
+ - introduce the handshake function for waiting on a register
+ - fix usb_ehci_fsl with the new HC_LENGTH macro
+
+ Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit db63299b1dd2894ade542278210bccd046de6435
+Author: michael <michael@panicking.retis>
+Date: Wed Dec 10 17:55:19 2008 +0100
+
+ [PATCH] Fix EHCI usb. I start to test on a
+ IXP465 board and I find some errors in the code. This
+ patch fix:
+ - descriptor initizialization (config, interface and endpoint
+ must be one next-to the other when the USB_DT_CONFIG message
+ is send.
+ - FIX little/endian bigendian (introduce the CONFIG_EHCI_DESC_BIG_ENDIAN
+ and the CONFIG_EHCI_MMIO_BIG_ENDIAN)
+ - Introduce the linux version of the usb_config_descriptor and
+ usb_interface descriptor. This descriptor does't contains
+ u-boot extension.
+
+ Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit 6b92487dcf9afe83a3570153d66940fdb293be76
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date: Fri Nov 28 13:22:09 2008 +0100
+
+ USB ehci freescale support
+
+ Add USB ehci freescale support
+
+ Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit aaf098cfeed04595d4c5100ffd39095d79edbf90
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date: Fri Nov 28 13:20:46 2008 +0100
+
+ USB ehci core support
+
+ Add USB ehci core support
+
+ Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit 3e126484df7868e341545cce740b24b62b0cd3b7
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date: Fri Nov 28 13:19:19 2008 +0100
+
+ Prepare USB layer for ehci
+
+ Prepare USB layer for ehci support
+
+ Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit a0cb3fc31e58996a1c5732715ac04159d4d284fd
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date: Wed Dec 10 15:52:06 2008 +0100
+
+ USB storage cleanup patch
+
+ Cleanup usb storage
+
+ Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit fe033ad6d0883063fe857237abb9436fab03208c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 06:02:55 2008 -0400
+
+ Blackfin: fixup misc warnings such as printf's and missing casts
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 1f4a3bb50343719c434d7e2541a2f86480a6d25c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 22:09:26 2008 -0400
+
+ Blackfin: convert old boards to use COBJS-y Makefile style
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 1f75d6f0ff005762d3e6ad92ae4ce2ab366b3bb5
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 22:38:37 2008 -0400
+
+ Blackfin: bf533-stamp: rewrite resource swap logic
+
+ The old swap function tended to clobber unrelated pins and screw up masks.
+ Rewrite the thing from scratch so it only uses the resources it needs.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 29d4ea0a9073c82469184331010136f52edf8db6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 22:08:42 2008 -0400
+
+ Blackfin: bootldr: implement BF53x/BF56x LDR loader
+
+ The BF53x/BF56x parts do not have an on-chip ROM to boot LDRs out of
+ arbitrary memory locations, so implement a basic one in software.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8b35e3aeff6c2d747c37697997b3f8a808432329
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 22:05:42 2008 -0400
+
+ Blackfin: implement real write support for OTP
+
+ Now that real documentation has been released for the OTP interface and
+ the on-chip ROM wrt writing/timings, implement support for reading/writing
+ as well as dumping/locking.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 9372c3214808fab545227d8d0f76b3bfcc6760ec
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 22:04:05 2008 -0400
+
+ Blackfin: update on-chip ROM API
+
+ This brings the API for the on-chip ROM in line with the toolchain and
+ hardware documentation.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 7633903bff432ec7b27905dce7396958553f2be6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:52:17 2008 -0400
+
+ Blackfin: allow serial console to be disabled
+
+ Some devices have no UART device pulled out, so allow people to disable the
+ driver completely in favor of other methods (like JTAG-console).
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 36ea8e9ad1107af12d244bba8c73e85b9f655e45
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:51:20 2008 -0400
+
+ Blackfin: support console-over-JTAG
+
+ The Blackfin JTAG has the ability to pass data via a back-channel without
+ halting the processor. Utilize that channel to emulate a console.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit cf8f2efb5f39c5225da92391c14a07eecbeca881
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:49:06 2008 -0400
+
+ Blackfin: handle new anomalies with reset
+
+ Workaround fun new anomalies related to software reset of the processor.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b1e9435b643043dd8fbd1fcc47309c6acb7b3c8e
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:44:00 2008 -0400
+
+ Blackfin: pass RETX to Linux
+
+ Make sure we save the value of RETX at power on and then pass it on to the
+ kernel so that it can nicely debug a "double-fault-caused-a-reset" crash.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b5eba3fafcccd1979380f12a256bd0e19be3d61e
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:40:26 2008 -0400
+
+ Blackfin: clarify relocation comment during init
+
+ People often ask questions about the init process and when things go
+ from flash to relocated base, so clarify the comments a bit.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 95433f6d43ede6b40c1d900f3f704c839aa074f1
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:23:41 2008 -0400
+
+ Blackfin: just set SP register directly during init
+
+ No need to set the SP register indirectly to the configured value when it
+ can be set directly.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 51230e6e356ccf4c932e0c4ff54f1e49da02285c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:15:53 2008 -0400
+
+ Blackfin: add portmuxing for UARTs on the BF51x
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 4f6a313240c531042f16909a3a170ab047b95779
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 1 01:26:29 2008 -0400
+
+ Blackfin: respect CONFIG_CLKIN_HALF
+
+ As pointed out by Ivan Koryakovskiy, the initialization code was not
+ actually respecting the CONFIG_CLKIN_HALF option when configuring the
+ PLL_CTL register.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit dc2bfb0b58d7462b9eba68f3ae38e38cada0ad33
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 1 01:21:34 2008 -0400
+
+ Blackfin: use common memcpy routine during init
+
+ Rather than using a local custom memcpy function, just call the existing
+ optimized Blackfin version.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 362c943347364e9373af4c5530778491ab56ec2e
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Apr 9 02:27:06 2008 -0400
+
+ Blackfin: set default boot SPI CS for BF538/BF539
+
+ The BF538/BF539 use CS2 for booting off of rather than CS1 like newer
+ Blackfin parts.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 74dde80bd5d55bc146630853ca191aaeea7c30f4
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Apr 9 02:20:59 2008 -0400
+
+ Blackfin: punt unused BF533-STAMP definitions
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit fee531eeefc3b5f2c63c7fe27b9f55d924c59c26
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Apr 18 20:44:11 2008 -0400
+
+ Blackfin: resurrect BF533-STAMP video splash driver
+
+ This video driver used to live in the Blackfin cpu directory, but it was
+ lost during the unification process. This brings it back.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit a750d038f2548d846ea1e046d873dc932d041319
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Apr 9 02:31:29 2008 -0400
+
+ Blackfin: tighten up post memory coding style
+
+ No functional changes here; just cleanup code style a bit.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 0649908f92c9bd214dd139aa3d4698c1654a45c6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Apr 9 02:29:18 2008 -0400
+
+ Blackfin: bf537-stamp nand: fix more style errors in previous commit
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 41f3325ae9add641036d7cb362e884b698e53f07
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 20:31:17 2008 -0400
+
+ Blackfin: drop dead/wrong debug code in initdram()
+
+ The DEBUG code in initdram() is quite old and was never really useful, so
+ just drop it altogether. Common Blackfin debug code does a better job.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 65ba1abd3b90e0b2585745809b78e2651bd3bacb
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 20:30:28 2008 -0400
+
+ Blackfin: bf533-ezkit: shuffle flash defines a little
+
+ Some of the flash defines weren't in the correct location and caused build
+ problems in some configurations, so let's move types and defines to better
+ local locations.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit be853bf86b41e91f4c422f0f56fdf87ea3191266
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 04:16:47 2008 -0400
+
+ Blackfin: overhaul i2c driver
+
+ The current Blackfin i2c driver does not work properly with certain devices
+ due to it breaking up transfers incorrectly. This is a rewrite of the
+ driver and relocates it to the newer place in the source tree.
+
+ Also remove duplicated I2C speed defines in Blackfin board configs and
+ disable I2C slave address usage since it isn't implemented.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b6edc719a106ab7fa6e6950b4d97bc39c1368e45
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 04:00:07 2008 -0400
+
+ Blackfin: respect CONFIG_SYS_MONITOR_LEN for default flash protection
+
+ Respect the CONFIG_SYS_MONITOR_LEN define rather than assuming a size of
+ 128kB when setting up the default flash protection region for U-Boot
+ itself.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 78a0ba7dc24c9682371f6ee8549b569fb573a329
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 03:57:39 2008 -0400
+
+ Blackfin: respect/check CONFIG_SYS_GBL_DATA_SIZE
+
+ When setting up the global data, rather than relying on sizeof(), use the
+ common CONFIG_SYS_GBL_DATA_SIZE define.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 01815c2d06c5b838f2cd536703e47bd2c9148194
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 03:52:24 2008 -0400
+
+ Blackfin: implement general support for CONFIG_STATUS_LED
+
+ Here are the Blackfin-specific and board-independent pieces for status leds.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 6882b5a79a3247494b62c05015fa672557f1bfaa
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 03:49:32 2008 -0400
+
+ Blackfin: do not init i2c in Blackfin board init
+
+ The common code takes care of calling i2c_init() when needed, so no point
+ in us doing it as well.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 1118ea73698eee6e72ef5cbfc00e41746040304f
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 03:42:20 2008 -0400
+
+ Blackfin: bfin_mac: update port muxing
+
+ Adds support more Blackfin parts and fixes broken muxing for older ones.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 05b75e48832fc4afeecf8e76d704349557dffa35
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 03:35:44 2008 -0400
+
+ Blackfin: fix dcache handling when doing dma memcpy's
+
+ Our dcache invalidate function doesn't just invalidate, it also flushes.
+ So rename the function accordingly and fix the dma_memcpy() function so it
+ doesn't inadvertently corrupt the data destination.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 68e5632494168095d75f120af70043b68afd2476
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 18:56:56 2008 -0400
+
+ Blackfin: dont generate ldrs with --force
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 746290dfd86a70b41fc5fdd3df1424a647d5c5e8
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 18:55:30 2008 -0400
+
+ Blackfin: pass --bmode/--initcode when creating ldr
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 0332e4df71fccf9a96c5a4393e3c5d5daa50880a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 18:39:27 2008 -0400
+
+ Blackfin: minimize time cache is turned off when replacing cplb entries
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 21d631360430cf0ae9099612273cd4de28911ba9
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 15:31:13 2008 -0400
+
+ Blackfin: split cache handling out of dma_memcpy()
+
+ Creating a new dma_memcpy() function that skips all cache checks allows us
+ to use the function in very early init where the cache is not yet setup.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d31eb38512bed377d5d4b3c696662e52120a2e4c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 15:30:49 2008 -0400
+
+ Blackfin: abort dma_memcpy() for L1 scratchpad
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 81b799add709177e838466461f7b9989488b0fd5
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 15:27:52 2008 -0400
+
+ Blackfin: rename bootm.c to boot.c
+
+ The boot file contains functions for more than just "bootm", so rename it
+ accordingly.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d7ca7dd5bfc418ac173e9d2712f6cc2d8147a091
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 13:22:37 2008 -0400
+
+ Blackfin: set more sane default board config values
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 36cd52a00794fb15ffab05d640acca92d7482993
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 15:24:59 2008 -0400
+
+ Blackfin: convert CMD_LINE_ADDR to CONFIG_LINUX_CMDLINE_{ADDR,SIZE}
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c8054bc12e00669bd7588f2b30fef48aa94babac
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 13:21:27 2008 -0400
+
+ Blackfin: add bit defines for DDR parts
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 154502fe0796f3b7a4698378c5d2080ae28a9782
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 13:21:11 2008 -0400
+
+ Blackfin: add defines to describe active bootrom behavior
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2b6fd5c77db9c6ed3cea9799c86ff922cf0107b2
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Jan 27 16:03:53 2009 -0600
+
+ mpc83xx: fix undefined reference to `flush_cache' error in simpc8313 build
+
+ extend commit c70564e6b1bd08f3230182392238907f3531a87e
+ "NAND: Fix cache and memory inconsistency issue" to add the cache.o dependency
+ to the simpc8313 build and fix this:
+
+ ...Large Page NAND...Configuring for SIMPC8313 board...
+ nand_boot_fsl_elbc.o: In function `nand_boot':
+ nand_spl/board/sheldon/simpc8313/nand_boot_fsl_elbc.c:150: undefined reference to `flush_cache'
+ make[1]: *** [/home/r1aaha/git/u-boot-mpc83xx/nand_spl/u-boot-spl] Error 1
+ make: *** [nand_spl] Error 2
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 54a7cc4912feefa45be961cc47cc159563725d2f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 28 09:25:31 2009 +0100
+
+ mpc8536ds.c: include sata.h to for needed function prototypes
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2fb2604d5c20beb061b0a94282b7f6eb14d00cb8
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jan 27 18:03:12 2009 -0600
+
+ Command usage cleanup
+
+ Remove command name from all command "usage" fields and update
+ common/command.c to display "name - usage" instead of
+ just "usage". Also remove newlines from command usage fields.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 79621bc10ba8b8c45d348994aba5b9e4923cb77b
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jan 27 18:03:11 2009 -0600
+
+ amcc: Clean up command usage output
+
+ Update taihu and taishan commands to use cmd_usage() function
+ to display usage messages.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 62c3ae7c6ef215b1afa614abdf61acf077752207
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jan 27 18:03:10 2009 -0600
+
+ Standardize command usage messages with cmd_usage()
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 84cde2bb409c07c6ef36a192d194359d4e9ccd70
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jan 27 18:03:09 2009 -0600
+
+ pcs440ep: Clean up led command definition
+
+ The pcs440ep's led command usage formatting is non-standard. It
+ was made standard in preparation for larger command usage updates.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 9507e7867e04dc48c80ee333c2a9a5e70e887f62
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Jan 27 18:03:08 2009 -0600
+
+ Clean up diufb command definitions
+
+ The diufb command usage formatting is non-standard. It was
+ made standard in preparation for larger command usage updates.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 6450a8485836fc80615ae6de6a864c33369b44f5
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 28 00:29:26 2009 +0100
+
+ Update CHANGELOG, tiny coding style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit cf7e399fb35b3aea90a27d1df72f45f5d6156204
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Jan 27 16:12:21 2009 -0500
+
+ SATA: do not auto-initialize during boot
+
+ Rather than have the board code initialize SATA automatically during boot,
+ make the user manually run "sata init". This brings the SATA subsystem in
+ line with common U-Boot policy.
+
+ Rather than having a dedicated weak function "is_sata_supported", people
+ can override sata_initialize() to do their weird board stuff. Then they
+ can call the actual __sata_initialize().
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 50970839712dda35399e2fa83fe818df9354d618
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Mon Jan 26 08:45:14 2009 -0500
+
+ part_efi: Fix partition size calculation due to inclusive ending LBA.
+
+ The ending LBA is inclusive. Hence, the partition size should be
+ ((ending-LBA + 1) - starting-LBA) to get the proper partition size.
+
+ This is confirmed against the results from the parted tool.
+ (e.g. use parted /dev/sda -s unit S print) and observe the size.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit b5b004ad8a0ac6f98bd5708ec8b22fbddd1c1042
+Author: Tomasz Figa <tomasz.figa@gmail.com>
+Date: Tue Dec 30 18:35:57 2008 +0100
+
+ jffs2: Fix zero sector_size when not using CONFIG_JFFS2_CMDLINE
+
+ This patch fixes a bug (?) introduced after inclusion of the new
+ JFFS2 code.
+
+ When not using CONFIG_JFFS2_CMDLINE, the code in cmd_jffs2.c doesn't
+ fill in part->sector_size (keeping it as 0), but a correct value is
+ needed by the code in jffs2_1pass.c. This causes all JFFS2 accesses
+ to be in the same place of the memory, what obviously means
+ impossibility to use the JFFS2 partition.
+
+ This problem is fixed in this patch by including sector size
+ calculation in non-CONFIG_JFFS2_CMDLINE mtdparts_init variant.
+
+ Signed-off-by: Tomasz Figa <tomasz.figa_at_gmail.com>
+
+commit ba69dc26a5fd606da49573bb2f15e756a34f3f98
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Dec 30 02:59:25 2008 -0500
+
+ saveenv: standardize enablement
+
+ Rather than special casing each environment type for enabling the saveenv
+ command, have them all behave the same. This avoids bitrot as new env
+ sources are added/removed.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2ac6985a7466a1c8a7aa8b2fa24d360925a82764
+Author: Andrew Dyer <adyer@righthandtech.com>
+Date: Mon Dec 29 17:36:01 2008 -0600
+
+ soft_i2c.c add option for repeated start in i2c_read()
+
+ This patch adds a #define to optionally change the behaviour of
+ i2c_read() in soft_i2c.c to send an I2C repeated start instead of a
+ stop-start between sending the device address pointer write and
+ reading back the data. The current behaviour is retained as the
+ default.
+
+ While most devices will work either way, I have a smart battery(*)
+ that requires repeated start, and someone at some point found a
+ device that required a stop-start.
+
+ (*) http://www.inspired-energy.com/Standard_Products/NL2054/NL2054%20Rev1.0%20Data%20Sheet.pdf
+
+ Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
+
+commit 3429071700963ca2f944c51d695a7481af0cee33
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Jan 27 22:07:14 2009 +0100
+
+ {delta,zylonite}/lowlevel_init.S: fix typo
+
+ Commit 9d803d8c mistakenly changed some constants
+ from 0x300 into 300 - this patch fixes it.
+
+ Pointed out by Tom Evans <tom@ceos.com.au>, see
+ http://article.gmane.org/gmane.comp.boot-loaders.u-boot/51992 for
+ details.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 1bc434373013af241835c14011ac3f291dccbf53
+Author: Stefan Althoefer <stefan.althoefer@web.de>
+Date: Sat Dec 20 19:40:41 2008 +0100
+
+ drivers/net/e1000.c: missing terminator for supported devices
+
+ Signed-off-by: Stefan Althoefer <stefan.althoefer@web.de>
+
+commit 65f7d41031a70b1649b35020995c505edca91533
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Jan 27 21:36:28 2009 +0100
+
+ fat.c: fix warning: array subscript is above array bounds
+
+ Fix based on suggestion by David Hawkins <dwh@ovro.caltech.edu>.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 107b801cf3fe39612d69d70581ebc3bf5e215554
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Jan 2 15:11:41 2009 +0100
+
+ Fix gunzip in case of insufficient output buffer
+
+ U-Boot's gunzip() function does not handle the return code
+ of zlib's inflate() function correctly. gunzip() is implemented
+ to uncompress all input data in one run. So the correct return
+ code for the good case is Z_STREAM_END. In case of insufficient
+ output buffer memory inflate returns Z_OK. For gunzip() this
+ is an error.
+
+ It also makes sense to me to call inflateEnd() also in case
+ of an error.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 2a61eff6a82f0d6e2335d968799b3fbeb3ff4d8e
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 21 17:25:01 2009 +0100
+
+ MIPS: Add VCT board series support (Part 3/3)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ae691e5719c48f1d2826cb72722497d1d162765b
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 21 17:24:49 2009 +0100
+
+ MIPS: Add VCT board series support (Part 2/3)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 50752790bc9285c0c1c5235e88f3a4ef2eec1e72
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 21 17:24:39 2009 +0100
+
+ MIPS: Add VCT board series support (Part 1/3)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 03d3bfb00806b5441f1871c7408c1749863e0fdc
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 21 17:20:20 2009 +0100
+
+ MIPS: Add flush_dcache_range() and invalidate_dcache_range()
+
+ This patch adds flush_/invalidate_dcache_range() to the MIPS architecture.
+ Those functions are needed for the upcoming dcache support for the USB
+ EHCI driver. I chose this API because those cache handling functions are
+ already present in the PPC architecture.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit de832a99414ff06a4b2cdc9f5280b387da039834
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jan 26 10:05:20 2009 +0100
+
+ nand_spl: Fix compile problem with board_nand_init() prototype
+
+ This patch removes the now obsolete and additionally wrongly defined
+ board_nand_init() prototype from nand_spl/nand_boot.c.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit e8eac437189430d8e04a5d254ed92c58bc534a79
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Wed Jan 14 08:44:26 2009 -0500
+
+ CFI: Add geometry reversal for STMicro M29W320ET
+
+ Added flash_fixup_stm to fix geometry reversal on STMicro M29W320ET flash chip.
+
+ Modeled after flash_fixup_amd, this patch handles the geometry reversal
+ or erase sectors that exist for ST Micro (now Numonyx) M29W320ET flash.
+ Since I cannot test all STM's chips, the detection is implemented as
+ narrow as possible for now.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0f8e851e897b535959a0781171910cd97f33c30c
+Author: Jens Gehrlein <sew_s@tqs.de>
+Date: Tue Dec 16 17:25:55 2008 +0100
+
+ CFI: increase performance of function find_sector()
+
+ Tested on TQM5200S-BD with Samsung K8P2815UQB
+
+ Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a7292871a79cc48d98e3a708dd3c3b81580db6ef
+Author: Jens Gehrlein <sew_s@tqs.de>
+Date: Tue Dec 16 17:25:54 2008 +0100
+
+ CFI: avoid redundant function call in single word programming mode
+
+ The function find_sector() doesn't need to be called twice in
+ the case of AMD command set.
+ Tested on TQM5200S-BD with Samsung K8P2815UQB.
+
+ Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c8901f46a71ec16e084e604596a09e23bfb0f6ac
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jan 26 10:15:23 2009 +0100
+
+ ppc4xx: Remove compilation warning in gdppc440etc.c
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 91f33534728e6416d332ad2b53ad1d6fde57f7fc
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Jan 2 12:19:47 2009 +0100
+
+ ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files
+
+ Lot's of 405 board config files use CONFIG_SYS_IGNORE_405_UART_ERRATA_59.
+ Either they define or undef it. Because it's not used in any source
+ files this patch removes any references to it.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 89b8619aaeafc922ca0c3bb249872591050c8dcc
+Author: Dirk Eibach <eibach@gdsys.de>
+Date: Tue Dec 9 13:12:40 2008 +0100
+
+ ppc4xx: Add GDsys PowerPC 440 ETX board support.
+
+ Board support for the Guntermann & Drunck PowerPC 440 ETX module.
+ Based on the AMCC Yosemite board support by Stefan Roese.
+
+ Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3943d2ff6cc40dd601a9feeb39eb6d3d5090ea6d
+Author: Dirk Eibach <eibach@gdsys.de>
+Date: Tue Dec 9 11:00:07 2008 +0100
+
+ ppc4xx: Improve DDR autodetect
+
+ Added support for a second memory bank to DDR autodetection for 440
+ platforms.
+ Made hardcoded values configurable.
+
+ Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 71a040f4f556cca4d30f06805d82e717b3ef1020
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Fri Nov 21 12:06:26 2008 +0900
+
+ sh: sh7763rdp: Update sh7763rdp config
+
+ Add CONFIG_NET_MULTI in config file, because sh_eth changed new newwork API.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit ba705b5b1a97b47388ed48858bef6bf7b6bfcd56
+Author: Gary Jennejohn <garyj@denx.de>
+Date: Thu Nov 20 12:28:38 2008 +0100
+
+ mgcoge make ether_scc.c work with CONFIG_NET_MULTI
+
+ This change is needed for mgcoge because it uses two ethernet drivers.
+
+ Add a check for the presence of the PIGGY board on mgcoge. Without this
+ board networking cannot work and the initialization must be aborted.
+
+ Only allocate rtx once to prevent DPRAM exhaustion.
+
+ Initialize ether_scc.c and the keymile-specific HDLC driver (to be added
+ soon) in eth.c.
+
+ Signed-off-by: Gary Jennejohn <garyj@denx.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit bd3980cc095af1728b994cdd8bf1ac430b6289e6
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Fri Nov 21 12:04:18 2008 +0900
+
+ sh: sh_eth: Change new network API
+
+ sh_eth used old network API. This patch changed new API.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 890a02e8ee6b8c26a6e3e505e1a2d29cd73aa6f6
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Nov 12 13:31:02 2008 +0100
+
+ net: smc911x: Make register read/write functions weak
+
+ This patch changes the reg_read/_write to smc911x_reg_read/_write
+ and defines then as weak so that they can be overridden by board
+ specific version.
+
+ This will be used by the upcoming VCTH board support.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 8b69b563039989885969d24465c56f8ac4c07c4c
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Nov 20 09:57:14 2008 +0100
+
+ powerpc: net: support for the SMSC LAN8700 PHY
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d5254f149da9e6cd649d887b042ce577ef3ba78d
+Author: Alessandro Rubini <rubini@unipv.it>
+Date: Sat Jan 24 18:10:37 2009 +0100
+
+ Initial support for Nomadik 8815 development board
+
+ The NMDK8815 board is distributed by ST Microelectornics.
+ Other (proprietary) code must be run to unlock the CPU before
+ U-Boot runs. doc/README.nmdk8815 outlines the boot sequence.
+
+ This is the initial port, with basic infrastructure and
+ a working serial port.
+
+ Signed-off-by: Alessandro Rubini <rubini@unipv.it>
+ Acked-by: Andrea Gallo <andrea.gallo@stnwireless.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7d264c1ef267cfc8d928bc8577a7cc907f2f5e47
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sun Dec 14 09:47:18 2008 +0100
+
+ OMAP3: Add I2C support
+
+ Add I2C support.
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit b1c3bf99fb477675d464aeadb5dd69d2cbc9dc7b
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sun Dec 14 09:47:17 2008 +0100
+
+ OMAP3: Add MMC support
+
+ Add MMC support.
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 12201a13547ec22ddcdae278e74465e54a3be60c
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sun Dec 14 09:47:16 2008 +0100
+
+ OMAP3: Add NAND support
+
+ Add NAND support.
+
+ Signed-off-by: Nishanth Menon <nm@ti.com>
+ Signed-off-by: Syed Mohammed Khasim <khasim@ti.com>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 91eee546737ae21d930af479530997174c342b13
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sun Dec 14 09:47:15 2008 +0100
+
+ OMAP3: Add common board, interrupt and system info
+
+ Add common board, interrupt and system info code.
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 5ed3e8659e5373f6a229877ac506c0b00a054fb8
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sun Dec 14 09:47:14 2008 +0100
+
+ OMAP3: Add common clock, memory and low level code
+
+ Add common clock, memory and low level code
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 0b02b184003e6a5023e05d5f31de54db279b1431
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sun Dec 14 09:47:13 2008 +0100
+
+ OMAP3: Add common cpu and start code
+
+ Add common cpu and start code.
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit a8b6450546cd507d331b8fde384791d84bde5651
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sun Dec 14 09:47:12 2008 +0100
+
+ OMAP3: Add OMAP3, memory and function prototype headers
+
+ Add OMAP3, memory and function prototype header files for OMAP3.
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 2c803210a464abbac35752ca1c737514360b4c32
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Sun Dec 14 09:47:11 2008 +0100
+
+ OMAP3: Add pin mux, clock and cpu headers
+
+ Add pin mux, clock and cpu header files for OMAP3.
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 685533646f4ff17a84ec9265cabb60af325b6e1f
+Author: Maxim Artamonov <scn1874@yandex.ru>
+Date: Wed Dec 3 05:38:17 2008 +0300
+
+ bugfix for i.mx31 CCM_UPCTL reg
+
+ Signed-off-by: Maxim Artamonov <scn1874 at yandex.ru>
+
+commit 24113a44ed5cd3257a0237c3961e121812fca6db
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Dec 30 03:15:38 2008 -0500
+
+ easylogo: add optional gzip support
+
+ Some images can be quite large, so add an option to compress the
+ image data with gzip in the U-Boot image. Then at runtime, the
+ board can decompress it with the normal zlib functions.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 7e4b9b4f6f43838fad3ad72c029a3d7fc7c7d48c
+Author: Bryan Wu <bryan.wu@analog.com>
+Date: Fri Jan 2 20:47:45 2009 -0500
+
+ fat: fix unaligned errors
+
+ A couple of buffers in the fat code are declared as an array of bytes.
+ But it is then cast up to a structure with 16bit and 32bit members.
+ Since GCC assumes structure alignment here, we have to force the
+ buffers to be aligned according to the structure usage.
+
+ Signed-off-by: Bryan Wu <bryan.wu@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 68f8718df2ed4c2f43031407ccf6cfa81125dddc
+Author: Brad Bozarth <bflinux@yumbrad.com>
+Date: Thu Jan 1 22:45:47 2009 -0500
+
+ spi flash: fix crash due to spi flash miscommunication
+
+ Higher spi flash layers expect to be given back a pointer that was
+ malloced so that it can free the result, but the lower layers return
+ a pointer that is in the middle of the malloced memory. Reorder the
+ members of the lower spi structures so that things work out.
+
+ Signed-off-by: Brad Bozarth <bflinux@yumbrad.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit ce82ff05388b5ddafdf6082ef0776cce72c40b1c
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Sat Dec 20 14:54:21 2008 +0300
+
+ FPU POST: fix warnings when building with 2.18 binutils
+
+ When compile u-boot with the 2.18 binutils the following
+ warning messages for each object file in post/lib_ppc/fpu/ is
+ produced at the linking stage:
+
+ post/libpost.a(acc1.o) uses hard float, u-boot uses soft-float
+ ...
+
+ This is because of the fact that, in general, the soft-float and
+ hard-float ABIs are incompatible; the 2.18 binutils do checking
+ of the Tag_GNU_Power_ABI_FP attribute of the files to be linked, and
+ produce the worning like above if these are not compatible.
+
+ The incompatibility of ABIs is concerned only the float values:
+ e.g. the soft-float ABI assumes the float argument passing in the
+ pair of rX registers, and the hard-float ABI assumes passing of
+ the float argument in the fX register. When we don't pass the float
+ arguments between the functions compiled with different floatness,
+ then such an application will work correctly.
+ This is the case for the FPU POST: u-boot (compiled with soft-float)
+ doesn't pass to (and doesn't get from) the FPU POST functions any
+ floats; there are no functions exported from the post/lib_ppc/fpu/
+ objects which would work with float parameters/returns too. So, we
+ can reassure the linker not to worry about the difference in ABI
+ attributes of linking files just by setting the 'soft-float'
+ attribute for the objects in post/lib_ppc/fpu. And this patch does
+ this.
+
+ Also, to avoid passing both soft- and hard-float options in CFLAGS
+ when compiling the files from post/lib_ppc/fpu (which is OK, but
+ looks rather dirty) this patch removes the soft-float string from
+ CFLAGS in post/lib_ppc/fpu/Makefile.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit a7c9310457e85b4598abe5b304108edf11332e2f
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Dec 17 16:36:22 2008 -0600
+
+ Add support for Maxim's DS4510 I2C device
+
+ Initial support for the DS4510, a CPU supervisor with
+ integrated EEPROM, SRAM, and 4 programmable non-volatile
+ GPIO pins. The CONFIG_DS4510 define enables support
+ for the device while the CONFIG_CMD_DS4510 define
+ enables the ds4510 command. The additional
+ CONFIG_DS4510_INFO, CONFIG_DS4510_MEM, and
+ CONFIG_DS4510_RST defines add additional sub-commands
+ to the ds4510 command when defined.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit b6fc6fd49a84543e1324e1620b9f301ff7c1f27f
+Author: Dirk Eibach <eibach@gdsys.de>
+Date: Tue Dec 16 14:51:56 2008 +0100
+
+ common: Iteration limit for memory test.
+
+ The iteration limit is passed to mtest as a fourth parameter:
+ [start [end [pattern [iterations]]]]
+ If no fourth parameter is supplied, there is no iteration limit and the
+ test will loop forever.
+
+ Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+
+commit 97cae3a4c68d856374ccc70fd2c5f8714cc94f7d
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Dec 15 15:40:12 2008 +0100
+
+ serial: Rename driver vcth to vct to support other board variants
+
+ Moved driver vcth.c to vct.c to better reflect the VCT board series.
+ This driver is now used by the VCT platforms:
+
+ vct_premium
+ vct_platinum
+ vct_platinumsvc
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 36ede4d63e59c9277ec180b09c39b8bf46425ba2
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Fri Dec 12 00:45:27 2008 +0900
+
+ nios: Move README.nios_CONFIG_SYS_NIOS_CPU to doc/ dir
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit c3284b030b1cd492b4f46c576aea01bef258599d
+Author: Peter Korsgaard <jacmet@sunsite.dk>
+Date: Wed Dec 10 16:24:16 2008 +0100
+
+ common/main: support bootdelay=0 for CONFIG_AUTOBOOT_KEYED
+
+ Support bootdelay=0 in abortboot for the CONFIG_AUTOBOOT_KEYED case
+ similar to the CONFIG_ZERO_BOOTDELAY_CHECK support for the
+ !CONFIG_AUTOBOOT_KEYED case.
+
+ Do this by reversing the loop so we do at least one iteration before
+ checking for timeout.
+
+ Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
+
+commit 94f9279f7bbdc01bbc7cf85aedf9b545943b94c3
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Mon Dec 8 17:24:08 2008 +0100
+
+ Added legacy flash ST Micro M29W040B
+
+commit 626d07348e5f9f302f4ea182161a89f7362a0488
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Mon Dec 8 20:04:51 2008 +1100
+
+ Fixed off-by-one errors in lib_m68k/interrupts.c
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit a5989c42ae5e295f274a795c426c47819bbdbfda
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Dec 7 10:29:05 2008 +1100
+
+ Removed all references to CONFIG_SYS_RESET_GENERIC
+
+ Generic i386 reset - #define made redundant by weak function
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit 2b5360eb2bc0b741ae5cb3c84d35ccdd17667c8a
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Dec 7 10:29:04 2008 +1100
+
+ Remove #ifdef CONFIG_SC520 in source code
+
+ CONFIG_SC520 is now used for conditional compile
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit ead056bc206f6b7ee6dc98766678b64635ea20b8
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Dec 7 10:29:03 2008 +1100
+
+ Added MMCR reset functionality
+
+ Reset function specific to AMD SC520 microcontroller - Is more of a
+ 'hard reset' that the triple fault.
+
+ Requires CONFIG_SYS_RESET_SC520 to be defined in config
+
+ I would have liked to add this to a new file (cpu/i386/sc520/reset.c)
+ but ld requires that a object file in a library arhive MUST contain
+ at least one function which does not override a weak function (and is
+ called from outside the object file) in order for that object file to
+ be extracted from the archive. This would be the only function on the
+ new file, and hence, will never get linked in.
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit 3f5f18d12d32ee0661bf51dfc55752c005230d6e
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Dec 7 10:29:02 2008 +1100
+
+ Moved generic (triple fault) reset code
+
+ Moved from interrupts.c to cpu.c and made into a weak function to
+ allow vendor specific override
+
+ Vendor specific CPU reset (like the AMD SC520 MMCR reset) can now be
+ added to the vendor specific code without the need to remember to
+ #undef usage of the generic method and if you forget to include your
+ custom reset method, you will always get the default.
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit 9933d609020c297788f53f334c8465fa7a99b10c
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Dec 7 10:29:01 2008 +1100
+
+ Moved definition of set_vector() to new header file
+
+ This allows for future tidy ups and functionality that will require
+ set_vector ()
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit 407976185e0dda2c90e89027121a1071b9c77bfb
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Dec 7 10:29:00 2008 +1100
+
+ Moved sc520 specific code into new cpu/i386/sc520 folder
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 85ffbbd51914925a542d8528be7f072e5ab02157
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Dec 7 10:28:58 2008 +1100
+
+ Renamed cpu/i386/reset.S to resetvec.S
+
+ Brings i386 in line with other CPUs with a reset vector and frees up reset.c
+ for CPU reset functions
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit a3f4c123f569474e80ea012b8db0de46afdb6443
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jan 24 01:01:49 2009 +0100
+
+ Makefile: keep lists sorted.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c620c01e96814558470698ed5cab1bf2f504d1b5
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Dec 7 10:28:57 2008 +1100
+
+ Added initial eNET board support
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit 0c0ccf401ee03a5008fc2c19b05a662bce1a1086
+Author: Gary Jennejohn <garyj@denx.de>
+Date: Thu Nov 20 11:37:26 2008 +0100
+
+ POWERPC 82xx: add the SCC as an HDLC controller
+
+ Right now this is only used by keymile.
+
+ Signed-off-by: Gary Jennejohn <garyj@denx.de>
+
+commit 1e8f4e78ca393b3d8e86bd8055758dd465d9113f
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Nov 20 09:59:09 2008 +0100
+
+ powerpc, keymile boards: extract identical config options
+
+ This patch extracts the identical config options for the
+ keymile boards mgcoge, mgsuvd and kmeter1 in a new
+ common config file keymile-common.h.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 210c8c00aad3328145204adab434bb7d70b06b75
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Nov 21 08:29:40 2008 +0100
+
+ powerpc: keymile: Add a check for the PIGGY debug board
+
+ Check the presence of the PIGGY on the keymile boards mgcoge,
+ mgsuvd and kmeter1. If the PIGGY is not present, dont register
+ this Ethernet device.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit de0443614af4d16675ab436665aeb11ddc9f7214
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Nov 20 09:57:47 2008 +0100
+
+ powerpc: 83xx: add support for the kmeter1 board
+
+ This patch adds support for the kmeter1 board from Keymile,
+ based on a Freescale MPC8360 CPU.
+
+ - serial console on UART 1
+ - 256 MB DDR2 RAM
+ - 64 MB NOR Flash
+ - Ethernet RMII Mode over UCC4
+ - PHY SMSC LAN8700
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 3feb647f3fd0881382c7a29f4cf280b66473ae0a
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Tue Nov 4 13:51:18 2008 +0100
+
+ Add a do_div() wrapper macro, lldiv().
+
+ Add a do_div() wrapper, lldiv(). The new inline function doesn't modify
+ the dividend and returns the result of division, so it is useful
+ in complex expressions, i.e. "return(a/b)" -> "return(lldiv(a,b))"
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit 18af1c5f0f7402dc0d6a71b012c68025dd97cf72
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Jan 23 14:22:14 2009 -0600
+
+ 85xx: Add a 36-bit physical configuration for MPC8572DS
+
+ We move all IO addressed (CCSR, localbus, PCI) above the 4G boundary
+ to allow for larger memory sizes.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c51fc5d53c4560abc4d0a6126c06fc68133d1528
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Jan 23 14:22:13 2009 -0600
+
+ 85xx: Handle eLBC difference w/36-bit physical
+
+ The eLBC only handles 32-bit physical address in systems with 36-bit
+ physical. The previos generation of LBC handled 34-bit physical
+ address in 36-bit systems. Added a new CONFIG option to convey
+ the difference between the LBC and eLBC.
+
+ Also added defines for XAM bits used in LBC for the extended 34-bit
+ support.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 72a9414a8e21e9536822c7353bc08d21ce5ad53d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Jan 23 14:22:12 2009 -0600
+
+ 85xx: Use BR_ADDR macro for NAND chipselects
+
+ Use the new BR_ADDR macro to properly setup the address field of the
+ localbus chipselects used by NAND.
+
+ This allows us to deal with 36-bit phys on these boards in the future.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2fc7eb0cfc608c9369001d57a0411af5e6a58f7c
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Thu Jan 15 11:58:35 2009 -0500
+
+ Add secondary CPUs processor frequency for e500 core
+
+ This patch updates e500 freqProcessor to array based on CONFIG_NUM_CPUS,
+ and prints each CPU's frequency separately. It also fixes up each CPU's
+ frequency in "clock-frequency" of fdt blob.
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit bf5b1f0c0d28ce062e1d368680632dfb099de692
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Nov 21 16:31:53 2008 +0800
+
+ 85xx: enable the auto self refresh for wake up ARP
+
+ The wake up ARP feature need use the memory to process
+ wake up packet, we enable auto self refresh to support it.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit b4983e16d150ab7d039704c310aacbd2f4dc1e0f
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Nov 21 16:31:43 2008 +0800
+
+ fsl-ddr: use the 1T timing as default configuration
+
+ For light loaded system, we use the 1T timing to gain better
+ memory performance, but for some heavily loaded system,
+ you have to add the 2T timing options to board files.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 22cca7e1cd54590e967c73558b07ffbdccd39504
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Nov 21 16:31:35 2008 +0800
+
+ fsl-ddr: make the self refresh idle threshold configurable
+
+ Some 85xx processors have the advanced power management feature,
+ such as wake up ARP, that needs enable the automatic self refresh.
+
+ If the DDR controller pass the SR_IT (self refresh idle threshold)
+ idle cycles, it will automatically enter self refresh. However,
+ anytime one transaction is issued to the DDR controller, it will
+ reset the counter and exit self refresh state.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 22ff3d01348e0a2dc369b7efcbac30e4ce86d178
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Nov 21 16:31:29 2008 +0800
+
+ fsl-ddr: clean up the ddr code for DDR3 controller
+
+ - The DDR3 controller is expanding the bits for timing config
+ - Add the DDR3 32-bit bus mode support
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 80ee3ce6d7fe9441b4352d7cfaf6afc2507b1106
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Nov 21 16:31:22 2008 +0800
+
+ fsl-ddr: update the bit mask for DDR3 controller
+
+ According to the latest 8572 UM, the DDR3 controller
+ is expanding the bit mask, and we use the extend ACTTOPRE
+ mode when tRAS more than 19 MCLK.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit aca5f018a8386b85469482ed9867e3e29a2437d0
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 2 16:08:40 2008 -0600
+
+ 85xx: Introduce CONFIG_SYS_PCI*_IO_VIRT for FSL boards
+
+ Introduce a new define to seperate out the virtual address that PCI
+ IO space is at from the physical address. In most situations these are
+ mapped 1:1. However any code accessing the bus should use VIRT.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 5af0fdd81c3370c3a51421208fda568bdcbbec23
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 2 16:08:39 2008 -0600
+
+ 85xx: Introduce CONFIG_SYS_PCI*_MEM_VIRT for FSL boards
+
+ Introduce a new define to seperate out the virtual address that PCI
+ memory is at from the physical address. In most situations these are
+ mapped 1:1. However any code accessing the bus should use VIRT.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit a6e04c344ad1eefd47a75484441b385da815b8df
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 2 16:08:38 2008 -0600
+
+ 85xx: Use CONFIG_SYS_{PCI*,RIO*}_MEM_PHYS for physical address on FSL boards
+
+ Use the _MEM_PHYS defines instead of _MEM_BUS for LAW and real address fields
+ of TLBs. This is what we should have always been using from the start.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 5f91ef6acdbadec33e0192049e2b24a1d9692f1d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 2 16:08:37 2008 -0600
+
+ 85xx: Convert CONFIG_SYS_PCI*_IO_BASE to _IO_BUS for FSL boards
+
+ Use CONFIG_SYS_PCI*_IO_BUS for the bus relative address instead
+ of _IO_BASE so we are more explicit.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 10795f42cb94e71bcb262b615084f69dd886399a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 2 16:08:36 2008 -0600
+
+ 85xx: Convert CONFIG_SYS_{PCI*,RIO*}_MEM_BASE to _MEM_BUS for FSL boards
+
+ Use CONFIG_SYS_{PCI,RIO}_MEM_BUS for the bus relative address instead
+ of _MEM_BASE so we are more explicit.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit c953ddfd56b3ae3f28910fe3aed6de6968d1c9aa
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 2 14:19:34 2008 -0600
+
+ 85xx: separate FLASH BASE virtual from physical address
+
+ Added a CONFIG_SYS_FLASH_BASE_PHYS for use as the physical address and
+ maintain CONFIG_SYS_FLASH_BASE as the virtual address of the flash.
+
+ This allows us to deal with 36-bit phys on these boards in the future.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 52b565f5ad23b682489055b187767d8bf1c2e444
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 2 14:19:33 2008 -0600
+
+ 85xx: separate PIXIS virtual from physical address
+
+ Added a PIXIS_BASE_PHYS for use as the physical address and maintain
+ PIXIS_BASE as the virtual address of the PIXIS fpga registers.
+
+ This allows us to deal with 36-bit phys on these boards in the future.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 30837e5b21d5a742983581ab9ee3fac085311d19
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Tue Nov 11 08:52:09 2008 -0500
+
+ Add README file for MPC8572DS board
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 6dadc9195ad642cc662632f4d92f92d3d71e8bf2
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 20 16:15:04 2008 -0400
+
+ Blackfin: use common strmhz() in system output
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 5bb907a4925397789c90d074f4f7e92ce6b39402
+Author: Ron Madrid <ron_madrid@sbcglobal.net>
+Date: Thu Jan 22 15:05:24 2009 -0800
+
+ mpc83xx: New board support for SIMPC8313
+
+ This patch will create a new board, SIMPC8313, from Sheldon Instruments. This
+ board boots from NAND devices and is configureable for either large or small
+ page devices. The board supports non-soldered DDR2, one ethernet port, a
+ Marvell 88E1118 PHY, and PCI host support. The board also has a FPGA connected
+ to the eLBC providing glue logic to a TMS320C67xx DSP.
+
+ Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit d4bade8d77aa20e2846fa4accff0e7fa7961a134
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jan 18 19:46:06 2009 -0500
+
+ nand: fixup printf modifiers to match types used
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 389e6620e2271096df3316917528003627db4021
+Author: Schlaegl Manfred jun <manfred.schlaegl@gmx.at>
+Date: Tue Jan 20 16:57:55 2009 +0100
+
+ nand read.jffs2 (nand_legacy) in common/cmd_nand.c
+
+ Error with CONFIG_NAND_LEGACY in common/cmd_nand.c:
+ With current code "nand read.jffs2s" (read and skip bad blocks) is always interpreted as
+ "nand read.jffs2" (read and fill bad blocks with 0xff). This is because ".jffs2" is
+ tested before ".jffs2s" and only the first two characters are compared.
+
+ Correction:
+ Test for ".jffs2s" first and compare the first 7 characters.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 6c869637fef31e66380f0ea1d49690a2e26ec0d7
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Fri Jan 16 18:55:54 2009 +0100
+
+ NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS
+
+ This patch renames NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS and
+ changes the default from 8 to 1 for the legacy and the new MTD
+ NAND layer. This allows to remove all NAND_MAX_CHIPS definitions
+ in the board config files because none of the boards use multi
+ chip support (NAND_MAX_CHIPS > 1) so far. The bamboo and the DU440
+ define
+
+ #define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE
+
+ but that's bogus and did not work anyhow.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit c70564e6b1bd08f3230182392238907f3531a87e
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Dec 2 11:48:51 2008 +0800
+
+ NAND: Fix cache and memory inconsistency issue
+
+ We load the secondary stage u-boot image from NAND to
+ system memory by nand_load, but we did not flush d-cache
+ to memory, nor invalidate i-cache before we jump to RAM.
+ When the system has cache enabled and the TLB/page attribute
+ of system memory is cacheable, it will cause issues.
+
+ - 83xx family is using the d-cache lock, so all of d-cache
+ access is cache-inhibited. so you can't see the issue.
+ - 85xx family is using d-cache, i-cache enable, partial
+ cache lock. you will see the issue.
+
+ This patch fixes the cache issue.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 50657c273278f74378e1ac39b41d612b92fdffa0
+Author: Nishanth Menon <menon.nishanth@gmail.com>
+Date: Sat Dec 13 09:43:06 2008 -0600
+
+ NAND: Enable nand lock, unlock feature
+
+ Enable nand lock, unlock and status of lock feature.
+ Not every device and platform requires this, hence,
+ it is under define for CONFIG_CMD_NAND_LOCK_UNLOCK
+
+ Nand unlock and status operate on block boundary instead
+ of page boundary. Details in:
+ http://www.micron.com/products/partdetail?part=MT29C2G24MAKLAJG-6%20IT
+
+ Intial solution provided by Vikram Pandita <vikram.pandita@ti.com>
+ Includes preliminary suggestions from Scott Wood
+
+ Signed-off-by: Nishanth Menon <nm@ti.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 69fb8be4fc07162fdf6edf04bdc7233b0e9a920e
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Dec 6 02:40:55 2008 -0500
+
+ NAND: move board_nand_init to nand.h
+
+ Rather than putting the function prototype for board_nand_init() in the one
+ place where it gets called, put it into nand.h so that every place that also
+ defines it gets the prototype. Otherwise, errors can go silently unnoticed
+ such as using the wrong return value (void rather than int) when defining
+ the function.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 1ae39862044ebb1e682234b51f94421e3f871d6a
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Dec 2 11:06:47 2008 +0100
+
+ OneNAND: Additional sync with 2.6.27
+
+ - Add subpage write support
+ - Add onenand_oob_64/32 ecclayout
+
+ This has been missing and without it UBI has some incompatibilies issues
+ with the current (>= 2.6.27) Linux kernel version. vid_hdr_offset is
+ placed differently (2048 instead of 512) without this fix.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 1714f51a2009baaecf3d4f6e3bd8c4e93a8d3f23
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Thu Nov 13 15:14:33 2008 +0900
+
+ Add markbad function
+
+ Add missing markbad function
+ If not, it's hang when it entered the mtd->mark_bad().
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit c438ea175d8d002c1063b7a94b0c0e26668d1ac9
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Nov 12 13:47:24 2008 +0100
+
+ OneNAND: Bad block aware read/write command support
+
+ Update OneNAND command to support bad block awareness.
+ Also change the OneNAND command style to better match the
+ NAND version.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 8cf11f3aa78673730e9ecbbe4b75213b53f212c8
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 11 10:29:09 2008 +0100
+
+ OneNAND: Save version_id in onenand_chip struct
+
+ The version (ver_id) was not stored in the onenand_chip structure and
+ because of this the continuous locking scheme could be enabled on some
+ chips.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4fca3310d611cc0f51d7295ef3557afbdbd91dc3
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 11 10:28:53 2008 +0100
+
+ OneNAND: Fix compiler warnings
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1ac5744e33ee0aa6d6ddab3b99f9e70953156e69
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Nov 4 14:55:06 2008 +0800
+
+ mpc83xx: enable eLBC NAND support for MPC8315ERDB board
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit ef0921d6b05aeb9034158f9bef5323d6da9c925e
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Tue Nov 4 09:24:07 2008 +0900
+
+ Sync with 2.6.27
+
+ Sync with OneNAND kernel codes
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit e7f325be9edeb84bb457301776bbac1f7257dafc
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Jan 5 13:35:31 2009 +0100
+
+ microblaze: Use cache functions (especially cache status)
+ in systems which are configured without flash
+
+commit e9b737deb2c30125362d20e24170617476026e94
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Jan 5 13:29:32 2009 +0100
+
+ microblaze: Add cache flush
+
+commit b4f8dda35bfad447b4106828232705b2e878d168
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Jan 5 13:28:40 2009 +0100
+
+ microblaze: Add bootup messages to board.c
+
+commit 330e55459bc9983341da6c1d5c7fe00a664436fe
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Dec 19 13:25:55 2008 +0100
+
+ microblaze: Change microblaze-generic config file
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 52a822ed9c37a2ea0ed112a26d8ff5a6cb1c6f10
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Dec 19 13:14:05 2008 +0100
+
+ microblaze: Rename ml401 to microblaze-generic
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 6677876181cc8772bca8a372479a500d160f3993
+Author: Scott Wood <scottwood@freescale.com>
+Date: Tue Jan 20 11:56:11 2009 -0600
+
+ 83xx: Use the proper sequence for updating IMMR.
+
+ This ensures that subsequent accesses properly hit the new window.
+
+ The dcbi during the NAND loop was accidentally working around this;
+ it's no longer necessary, as the cache is not enabled.
+
+ Reported-by: Suchit Lepcha <Suchit.Lepcha@freescale.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8b34557c546e5e9f34ebf83c93413dad973d93df
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Jan 8 04:26:19 2009 +0300
+
+ mpc83xx: Add PCI-E support for MPC837XEMDS boards
+
+ MPC837XEMDS boards can support PCI-E via "PCI-E riser card". The card
+ provides two PCI-E (x2) ports. Though, only one port can be used in x2
+ mode. Two ports can function simultaneously in x1 mode.
+
+ PCI-E x1/x2 modes can be switched via "pex_x2" environment variable.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8f11e34b31a7be124a3239653f33af9510502045
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Jan 8 04:26:17 2009 +0300
+
+ mpc83xx: Add PCI-E support for MPC8315ERDB boards
+
+ MPC8315ERDB boards features PCI-E x1 and Mini PCI-E x1 ports. Let's
+ support them.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit fd6646c0b9ebe7e5afc4ae4c78097d9cd317a5e8
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Jan 8 04:26:12 2009 +0300
+
+ mpc83xx: Add support for MPC83xx PCI-E controllers
+
+ This patch adds support for MPC83xx PCI-E controllers in Root Complex
+ mode.
+
+ The patch is based on Tony Li and Dave Liu work[1].
+
+ Though unlike the original patch, by default we don't register PCI-E
+ buses for use in U-Boot, we only configure the controllers for future
+ use in other OSes (Linux). This is done because we don't have enough
+ of spare BATs to map all the PCI-E regions.
+
+ To actually use PCI-E in U-Boot, users should explicitly define
+ CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES symbol in the board file. And
+ only then U-Boot will able to access PCI-E, but at the cost of disabled
+ address translation.
+
+ [1] http://lists.denx.de/pipermail/u-boot/2008-January/027630.html
+
+ Signed-off-by: Tony Li <tony.li@freescale.com>
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Acked-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 88ecf55cabd7aea28fe8093720e208f53ccfdcf5
+Author: Ira Snyder <iws@ovro.caltech.edu>
+Date: Mon Jan 12 13:33:17 2009 -0800
+
+ MPC8349EMDS: do not setup unused PCI clock outputs in PCI agent mode
+
+ When running in PCI agent mode, the PCI_CLK_OUT signals are not used, so do
+ not enable them. See the MPC8349EA Reference Manual, Section 4.4.2
+ "Clocking in PCI Agent Mode".
+
+ Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 75f35209f702bb26826855ed8c8e4d108ab5f412
+Author: Ira Snyder <iws@ovro.caltech.edu>
+Date: Mon Jan 12 13:32:26 2009 -0800
+
+ 83xx: PCI agent mode fixes for multi-board systems
+
+ When running a system with 2 or more MPC8349EMDS boards in PCI agent mode,
+ the boards will lock up the PCI bus by scanning against each other.
+
+ The boards lock against each other by trying to access the PCI bus before
+ clearing their configuration lock bit. Both boards end up in a loop,
+ sending and receiving "Target Not Ready" messages forever.
+
+ When running in PCI agent mode, the scanning now takes place after the
+ boards have cleared their configuration lock bit.
+
+ Also, add a missing declaration to the mpc83xx.h header file, fixing a
+ build warning.
+
+ Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 455a46915b82896cc2070eb326d075555c2bc580
+Author: Ron Madrid <ron_madrid@sbcglobal.net>
+Date: Fri Dec 12 13:12:45 2008 -0800
+
+ mpc83xx: Size optimization of start.S
+
+ Currently there are in excess of 100 bytes located at the beginning of the image
+ built by start.S that are not being utilized. This patch moves a few functions
+ into this part of the image. This will create a greater number of *available*
+ bytes that can be used by board specific code in NAND builds and will decrease
+ the size of the assembled code in other builds.
+
+ Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 72d15e705bc3983884105cb7755c7ba80e74a0a5
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 21 23:08:12 2009 +0100
+
+ Prepare v2009.01
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 635e5f8fc82365e6e9734b3132bc95135a6de679
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jan 18 21:37:48 2009 +0100
+
+ Prepare 2009.01-rc3
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4cda437898f7873752f0201757cd33f12196ce87
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Jan 17 13:32:42 2009 -0500
+
+ build system: treat all Darwin's alike
+
+ The x86 based version of Darwin behaves the same quirky way as the powerpc
+ Darwin, so only check HOSTOS when setting up Darwin workarounds.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c088a108c75db565e07292fd668dfa5491e85bc2
+Author: Peter Korsgaard <jacmet@sunsite.dk>
+Date: Wed Jan 14 13:52:24 2009 +0100
+
+ fdt_resize(): fix actualsize calculations with unaligned blobs
+
+ The code in fdt_resize() to extend the fdt size to end on a page boundary
+ is wrong for fdt's not located at an address aligned on a page boundary.
+ What's even worse, the code would make actualsize shrink rather than grow
+ if (blob & 0xfff) was bigger than the amount of padding added by ALIGN(),
+ causing fdt_add_mem_rsv to fail.
+
+ Fix it by aligning end address (blob + size) to a page boundary instead.
+ For aligned fdt's this is equivalent to what we had before.
+
+ Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
+
+commit fadad1573fb16c90025f08a2861d6047d093cba7
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Jan 9 04:38:17 2009 -0500
+
+ ncb: use socklen_t
+
+ The recvfrom() function takes a socklen_t, not an int.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit fc83c9273cec6e6e542f4a0ea3b653b7d0513ffa
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Jan 11 16:35:16 2009 +0100
+
+ sh: serial: use readx/writex accessors
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 9e1fa628bdb64745811cdd26c4f953846c076180
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Jan 11 16:35:15 2009 +0100
+
+ sh: serial: coding style cleanup
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c9935c992575922b7ef13eec0656ed8665d324e3
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Jan 11 17:48:56 2009 +0900
+
+ sh: Fix compile error on lowlevel_init file
+
+ lowlevel_init of SH was corrected to use the write/readXX macro.
+ However, there was a problem that was not able to be compiled partially.
+ This patch corrected this.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit a5b04d00bfeb940c62232972ce644d50b45797f9
+Author: Kieran Bingham <kieranbingham@gmail.com>
+Date: Tue Dec 30 01:16:03 2008 +0000
+
+ sh: Fix up rsk7203 target for out of tree build
+
+ Fix up rsk7203 target to build successfully using out-of-tree build.
+
+ Signed-off-by: Kieran Bingham <kbingham@mpc-data.co.uk>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit f7e78f3b74aae9caca2997bad865a72338326c0a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Dec 20 19:29:49 2008 +0100
+
+ sh: use write{8,16,32} in all lowlevel_init
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit e4430779623af500de1cee7892c379f07ef59813
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Dec 20 19:29:48 2008 +0100
+
+ sh: lowlevel_init coding style cleanup
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 85cb052ee41675ca361e6a4c69455dc715c8f2d9
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Dec 20 15:27:45 2008 +0100
+
+ sh: update sh2/sh2a timer coding style
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 1e15ff999322e81af4c0c0c548908f38944ba39c
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Dec 20 15:25:22 2008 +0100
+
+ sh: update sh timer coding style
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 0e3ece33801e377be67ffa29f083421ad820f28b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 14 23:26:05 2009 +0100
+
+ Prepare 2009.01-rc2
+
+ Update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e92c9a860e44c14513c8909ce4299e253a775eeb
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jan 14 22:35:30 2009 +0100
+
+ cpu/mpc824x/Makefile: fix warning with parallel builds
+
+ Parallel builds would occasionally issue this build warning:
+
+ ln: creating symbolic link `cpu/mpc824x/bedbug_603e.c': File exists
+
+ Use "ln -sf" as quick work around for the issue.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3ba605d4beec649438539e7df97b5fedb26592fb
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Jan 2 12:18:49 2009 +0100
+
+ ppc4xx: Add loadpci command to esd's CPCI4052 and CPCI405AB boards
+
+ This patch adds esd's loadpci BSP command to CPCI4052 and
+ CPCI405AB board. This requires CONFIG_CMD_BSP and CONFIG_PRAM.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 600fe46fb3dab7f07604f9009904f31584415114
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Jan 2 12:18:12 2009 +0100
+
+ ppc4xx: Disable pci node in device tree on CPCI405 pci adapters
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f6a1f490d224c600a09137e58d1026d150b8e679
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Jan 2 12:17:36 2009 +0100
+
+ ppc4xx: Cleanup CPCI405 board code
+
+ This patch cleans up CPCI405 board support:
+ - wrap long lines
+ - unification of spaces in function calls
+ - remove dead code
+
+ Use correct io accessors on peripherals.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit fceebb45a0b97e92f9889861f8c3b9cb885e706f
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Jan 2 12:16:35 2009 +0100
+
+ ppc4xx: Enable auto RS485 mode on PLU405 boards
+
+ This patch turns on the auto RS485 mode in the 2nd external
+ uart on PLU405 boards. This is a special mode of the used
+ Exar XR16C2850 uart. Because these boards only have a 485 physical
+ layer connected it's a good idea to turn it on by default.
+
+ Signed-off-by: Matthias Fuchs <mf@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b5f65dfa9aa8e068e62aba4733dc4fd97b1d9bf6
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Tue Jan 13 16:29:28 2009 -0500
+
+ Some changes of TLB entry setting for MPC8572DS
+
+ - Move the TLB entry of PIXIS_BASE from TLB0 to TLB1[8], because in CAMP mode,
+ all the TLB0 entries will be invalidated after cpu1 brings up kernel, thus cpu0
+ can not access PIXIS_BASE anymore (any access will cause DataTLBError exception)
+
+ - Set CONFIG_SYS_DDR_TLB_START to 9 for MPC8572DS board.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 950264317eb9594b2b5ee2fb65206200a1c6007a
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Tue Jan 13 16:29:22 2009 -0500
+
+ Change DDR tlb start entry to CONFIG param for 85xx
+
+ So that we can locate the DDR tlb start entry to the value other than 8. By
+ default, it is still 8.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 6d3a10f73ece7ffb736890c10e023222612a4aa0
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date: Fri Jan 9 16:02:35 2009 +0800
+
+ Change PCIE1&2 deciide logic on MPC8544DS board more readable
+
+ The IO port selection for MPC8544DS board:
+ Port cfg_io_ports
+ PCIE1 0x2, 0x3, 0x4, 0x5, 0x6, 0x7
+ PCIE2 0x4, 0x5, 0x6, 0x7
+ PCIE3 0x6, 0x7
+ This patch changes the PCIE12 and PCIE2 logic more readable.
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 028e116811d28a031660f1ad9e20ac1293b3c5c7
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date: Fri Jan 9 16:01:52 2009 +0800
+
+ PCIE2 and PCIE3 are decided by corresponing bit in devdisr instead of PCIE1 bit
+
+ PCIE2 and PCIE3 should be decided by corresponing bit in devdisr instead of
+ PCIE1 bit.
+ On MPC8572DS board, PCIE refers to PCIE1.
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 9afc2ef0307aecf52482df67c31b75d5f9e66b47
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date: Fri Jan 9 16:00:55 2009 +0800
+
+ Fix IO port selection issue on MPC8544DS and MPC8572DS boards
+
+ The IO port selection is not correct on MPC8572DS and MPC8544DS board.
+ This patch fixes this issue.
+ For MPC8572
+ Port cfg_io_ports
+ PCIE1 0x2, 0x3, 0x7, 0xb, 0xc, 0xf
+ PCIE2 0x3, 0x7
+ PCIE3 0x7
+
+ For MPC8544
+ Port cfg_io_ports
+ PCIE1 0x2, 0x3, 0x4, 0x5, 0x6, 0x7
+ PCIE2 0x4, 0x5, 0x6, 0x7
+ PCIE3 0x6, 0x7
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 3e3fffe3baf3befde287fec1fcbfe55052fb8946
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Wed Dec 3 22:36:44 2008 -0600
+
+ mpc8610hpcd: Fix PCI mapping concepts
+
+ Rename _BASE to _BUS, as it's actually a PCI bus address,
+ separate virtual and physical addresses into _VIRT and _PHYS,
+ and use each appopriately. This makes the code easier to read
+ and understand, and facilitates mapping changes going forward.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit 79e436cad3b4a7db88408c3f05175028f30d700d
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Wed Dec 3 22:36:26 2008 -0600
+
+ sbc8641d: Fix PCI mapping concepts
+
+ Rename _BASE to _BUS, as it's actually a PCI bus address,
+ separate virtual and physical addresses into _VIRT and _PHYS,
+ and use each appopriately. This makes the code easier to read
+ and understand, and facilitates mapping changes going forward.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit a9f3acbcd07da72b5446ce557531a3ed8b8beff0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jan 12 14:50:35 2009 +0100
+
+ MPC86xx: fix build warnings
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 032a1c934ef4dc003281f57302b6e693062c1868
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Jan 5 16:09:44 2009 -0500
+
+ bf537-stamp/nand: fix board_nand_init prototype
+
+ The board_nand_init() function should return an int, not void.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 687f952e4119594ab913be11c90f7f018c2a7a79
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Dec 11 07:04:48 2008 -0500
+
+ Blackfin: drop CONFIG_SPI handling in board init
+
+ The eeprom SPI init functions are duplicated as the common code already
+ executes these for us.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit e7e684b10d73a303902208594c7c3e7e0d753282
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Oct 24 17:51:57 2008 -0400
+
+ Blackfin: fix out-of-tree building with ldscripts
+
+ Many of the Blackfin board linker scripts are preprocessed, so make sure we
+ output the linker script into the build tree rather than the source tree.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b9eecc342f767b50e1476fbc1aad7d88dd4ce5eb
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Oct 24 17:48:54 2008 -0400
+
+ Blackfin: fix linker scripts to work with --gc-sections
+
+ Make sure all .text sections get pulled in and the entry point is properly
+ referenced so they don't get discarded when linking with --gc-sections.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 509fc553bc6087a6f705b3bf52f3950d7d1eaa58
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 20:45:44 2008 -0400
+
+ Blackfin: set proper LDRFLAGS for parallel booting LDRs
+
+ In order to boot an LDR out of parallel flash, the ldr utility needs a few
+ flags to tell it to generate the right header.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 3dd9395a0d7ce69a335d0e743c04b9caedd681d3
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Jan 6 21:41:59 2009 +0100
+
+ at91rm9200: move define from lowlevel_init to header
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 8a48686fac2030287765f1970ea046bd5734b733
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jan 3 17:22:26 2009 +0100
+
+ m501sk: move to the common memory setup
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d481c80d78f954133c035dae6c7d22de3625795d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jan 3 17:22:25 2009 +0100
+
+ at91rm9200: rename lowlevel init value to CONFIG_SYS_
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 4e170b16625291aa10d0d9abc3f34e8a5945d157
+Author: Nicolas Ferre <nicolas.ferre@atmel.com>
+Date: Tue Jan 6 21:13:14 2009 +0100
+
+ at91: add at91sam9xeek board support
+
+ At91sam9xe is basically an at91sam9260 with embedded flash. We can manage
+ it as another entry for at91sam9260 in the Makefile.
+
+ Check documentation at :
+ http://www.atmel.com/dyn/products/product_card.asp?part_id=4263
+
+ Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9ffd53db870a7da134f9a1ae76894a6b31237be5
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Jan 6 21:15:57 2009 +0100
+
+ fix bmp_logo.h make dependencies to allow parallel build
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e12d9a8fb48d24176efffccc072b445e60a3afe4
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jan 3 17:22:24 2009 +0100
+
+ at91: Fix Atmel's at91sam9 boards out of tree build
+
+ introduced in commit 89a7a87f084c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0668236bafaa1c11c521652a2facebc74beecbf0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 30 22:56:11 2008 +0100
+
+ README: update mailing list name and hits to patch submission.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d9011f9b75561a0bd9254934c2bb2bc799d4f645
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Dec 23 16:32:01 2008 -0600
+
+ 85xx: Enable inbound PCI config cycles for X-ES boards cleanup
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 1f03cbfae221b24ba1341a0a3f62ff01c5c874df
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Dec 23 16:32:00 2008 -0600
+
+ XPedite5200 board support cleanup
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit fea91edee8ae0295e3c30b1ff544df51f4d668e1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Dec 2 21:58:04 2008 +0100
+
+ usb_kbd: fix usb_kbd_deregister when DEVICE_DEREGISTER not enable
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit ada591d2a0ecff5f9bc5ed1ebf310f439c3d0a28
+Author: Trent Piepho <tpiepho@freescale.com>
+Date: Wed Dec 3 15:16:37 2008 -0800
+
+ mpc8[56]xx: Put localbus clock in sysinfo and gd
+
+ Currently MPC85xx and MPC86xx boards just calculate the localbus frequency
+ and print it out, but don't save it.
+
+ This changes where its calculated and stored to be more consistent with the
+ CPU, CCB, TB, and DDR frequencies and the MPC83xx localbus clock.
+
+ The localbus frequency is added to sysinfo and calculated when sysinfo is
+ set up, in cpu/mpc8[56]xx/speed.c, the same as the other frequencies are.
+
+ get_clocks() copies the frequency into the global data, as the other
+ frequencies are, into a new field that is only enabled for MPC85xx and
+ MPC86xx.
+
+ checkcpu() in cpu/mpc8[56]xx/cpu.c will print out the local bus frequency
+ from sysinfo, like the other frequencies, instead of calculating it on the
+ spot.
+
+ Signed-off-by: Trent Piepho <tpiepho@freescale.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 9863d6aca11405e1e0d8aba2045d78aeec4d4ee7
+Author: Trent Piepho <tpiepho@freescale.com>
+Date: Wed Dec 3 15:16:36 2008 -0800
+
+ mpc86xx: Double local bus clock divider
+
+ The local bus clock divider should be doubled for both 8610 and 8641.
+
+ Signed-off-by: Trent Piepho <tpiepho@freescale.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 446c381e3e16f19857b72ea0d06241267b8b9d58
+Author: Trent Piepho <tpiepho@freescale.com>
+Date: Wed Dec 3 15:16:35 2008 -0800
+
+ mpc8568: Double local bus clock divider
+
+ The clock divider for the MPC8568 local bus should be doubled, like the
+ other newer MPC85xx chips.
+
+ Since there are now more chips with a 2x divider than a 1x, and any new
+ 85xx chips will probably be 2x, invert the sense of the #if so that it
+ lists the 1x chips instead of the 2x ones.
+
+ Signed-off-by: Trent Piepho <tpiepho@freescale.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit f51f07eb58fad12de9294ba4ee6c09a0ddeaee03
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Dec 16 12:09:27 2008 +0800
+
+ 85xx: Fix the boot window issue
+
+ If one custom board is using the 8MB flash, it is set
+ as FLASH_BASE = 0xef000000, TEXT_BASE = 0xef780000.
+ The current start.S code will be broken at switch_as.
+
+ It is because the TLB1[15] is set as 16MB page size,
+ EPN = TEXT_BASE & 0xff000000, RPN = 0xff000000.
+
+ For the 8MB flash case, the EPN = 0xefxxxxxx,
+ RPN = 0xffxxxxxx. Assume the virt address of switch_as
+ is 0xef7ff18c, the real address of the instruction at
+ switch_as should be 0xff7ff18c. the 0xff7ff18c is out
+ of the range of the default 8MB boot LAW window
+ 0xff800000 - 0xffffffff.
+
+ So when we switch to AS1 address space at switch_as,
+ the core can't fetch the instruction at switch_as any
+ more. It will cause broken issue.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 58da8890d5fbd074746037722a423de9ac408616
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Thu Dec 11 15:47:50 2008 -0500
+
+ sbc8548: use proper PHY address
+
+ The values given for the PHY address were wrong, so the code
+ read no valid PHY ID, and fell through to the generic PHY
+ support, which would work on 1000M but would not auto negotiate
+ down to 100M or 10M.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+
+commit ad22f9273c6f24fbfa917e867680e9688e0c59c5
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Thu Dec 11 15:47:51 2008 -0500
+
+ sbc8548: enable command line editing by default.
+
+ Lets make things a bit more user friendly. It isn't 1985 anymore.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+
+commit bd93105fa171184a71ca8b22be03dc2705cfbd3f
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Thu Dec 11 15:47:49 2008 -0500
+
+ sbc8548: don't enable the 3rd and 4th eTSEC
+
+ These interfaces don't have usable connectors on the board, so don't
+ bother enumerating or configuring them.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+
+commit 181a3650113883728927928b3ac81ad6dade4b2c
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed Dec 3 10:08:19 2008 -0500
+
+ Set IVPR to kenrel entry point in second core boot page
+
+ Assuming the OSes exception vectors start from the base of kernel address, and
+ the kernel physical starting address can be relocated to an non-zero address.
+ This patch enables the second core to have a valid IVPR for debugger before
+ kernel setting IVPR in CAMP mode. Otherwise, IVPR is 0x0 and it is not a valid
+ value for second core which runs kernel at different physical address other
+ than 0x0.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit a5d212a263c58cc746481bf1fc878510533ce7d6
+Author: Trent Piepho <tpiepho@freescale.com>
+Date: Wed Dec 3 15:16:34 2008 -0800
+
+ mpc8xxx: LCRR[CLKDIV] is sometimes five bits
+
+ On newer CPUs, 8536, 8572, and 8610, the CLKDIV field of LCRR is five bits
+ instead of four.
+
+ In order to avoid an ifdef, LCRR_CLKDIV is set to 0x1f on all systems. It
+ should be safe as the fifth bit was defined as reserved and set to 0.
+
+ Code that was using a hard coded 0x0f is changed to use LCRR_CLKDIV.
+
+ Signed-off-by: Trent Piepho <tpiepho@freescale.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 58ec4866ed916c7e422f5107bb27b0822084728e
+Author: Trent Piepho <tpiepho@freescale.com>
+Date: Wed Dec 3 15:16:38 2008 -0800
+
+ mpc8[56]xx: Put localbus clock in device tree
+
+ Export the localbus frequency in the device tree, the same way the CPU, TB,
+ CCB, and various other frequencies are exported in their respective device
+ tree nodes.
+
+ Some localbus devices need this information to be programed correctly, so
+ it makes sense to export it along with the other frequencies.
+
+ Unfortunately, when someone wrote the localbus dts bindings, they didn't
+ bother to define what the "compatible" property should be. So it seems no
+ one was quite sure what to put in their dts files.
+
+ Based on current existing dts files in the kernel source, I've used
+ "fsl,pq3-localbus" and "fsl,elbc" for MPC85xx, which are used by almost all
+ of the 85xx devices, and are looked for by the Linux code. The eLBC is
+ apparently not entirely backward compatible with the pq3 LBC and so eLBC
+ equipped platforms like 8572 won't use pq3-localbus.
+
+ For MPC86xx, I've used "fsl,elbc" which is used by some of the 86xx systems
+ and is also looked for by the Linux code. On MPC8641, I've also used
+ "fsl,mpc8641-localbus" as it is also commonly used in dts files, some of
+ which don't use "fsl,elbc" or any other acceptable name to match on.
+
+ Signed-off-by: Trent Piepho <tpiepho@freescale.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 9d94aff699eed38b286814fcbb335f3eb8516a0e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 16 14:59:22 2008 -0600
+
+ NAND FSL elbc: Use virt_to_phys to determine which bank is in use
+
+ The current code that determines which bank/chipselect is used for a
+ given NAND instance only worked for 32-bit addresses and assumed
+ a 1:1 mapping. This breaks in 36-bit physical configs.
+
+ The proper way to handle this is to use the virt_to_phys() and
+ BR_PHYS_ADDR() routinues to match the 34-bit lbc bus address
+ with the the virtual address the NAND code uses.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Scott Wood <scottwood@freescale.com>
+
+commit 77c8115b1f1871811633eae77a5a700fac1f0e50
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 16 14:59:21 2008 -0600
+
+ ppc: Use addrmap in virt_to_phys and map_physmem.
+
+ If we have addr map support enabled use the mapping functions to
+ implement virt_to_phys() and map_physmem().
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ecf5b98c7a6a2e2256dfddd48fab26678dcd6b90
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 16 14:59:20 2008 -0600
+
+ 85xx: Add support to populate addr map based on TLB settings
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 78bbc5ce151c5a484bb51bf1866b4a993ffc16ec
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Dec 1 13:47:13 2008 -0600
+
+ XPedite5200 board support
+
+ Initial support for Extreme Engineering Solutions XPedite5200 -
+ a MPC8548-based PMC single board computer.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 487dcb4fb89be0992bc06ec1341090017bd9cf2f
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Oct 29 12:39:27 2008 -0500
+
+ 85xx: Enable inbound PCI config cycles for X-ES boards
+
+ Update X-ES Freescale boards to allow inbound PCI configuration
+ cycles when configured as agent/endpoint.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit ccf0fdd02b97323f8caae18d06cc9daeac2f192f
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Dec 17 16:36:23 2008 -0600
+
+ XPedite5370 board support
+
+ Initial support for Extreme Engineering Solutions XPedite5370 -
+ a MPC8572-based 3U VPX single board computer with a PMC/XMC
+ site.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit e92739d34e2d6b6aca93b2598248210710897ce8
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Dec 17 16:36:21 2008 -0600
+
+ Add support for PCA953x I2C gpio devices
+
+ Initial support for NXP's 4 and 8 bit I2C gpio expanders
+ (eg pca9537, pca9557, etc). The CONFIG_PCA953X define
+ enables support for the devices while the CONFIG_CMD_PCA953X
+ define enables the pca953x command. The CONFIG_CMD_PCA953X_INFO
+ define enables an 'info' sub-command which provides summary
+ information for the given pca953x device.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 7a8979591171676417ab36852d8811a8c46accd8
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Oct 29 12:39:26 2008 -0500
+
+ pci/fsl_pci_init: Enable inbound PCI config cycles
+
+ Add fsl_pci_config_unlock() function to enable a
+ PCI/PCIe interface configured in agent/endpoint mode to
+ respond to inbound PCI configuration cycles.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 92c78a3bbcb2ce508b4bf1c4a1e0940406a024bb
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed Dec 17 16:43:18 2008 +0100
+
+ avr32: Remove second definition of virt_to_phys()
+
+ The second definition introduced by 65e43a1063 conflicts with the
+ existing one.
+
+ Also, convert the existing definition to use phys_addr_t. The volatile
+ qualifier is still needed due to brain damage elsewhere.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit b616f2b545f73757669b37386f0b37bb61fc6797
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Sep 8 22:27:18 2008 +0200
+
+ MIPS: qemu_mips: update doc to generate and to use qemu flash, ide file
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 16cdf816779f5b602a9b3b4d2ea4dea05095c35b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Dec 16 22:10:31 2008 +0100
+
+ MIPS: qemu_mips: update doc to use all disk and boot linux kernel
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 13095b2f07dacb1f863772266c1789d47a523a8a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Dec 16 22:10:30 2008 +0100
+
+ MIPS: qemu_mips: move env storage just after u-boot
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit aced78d852d0b009e8aaa1445af8cb40861ee549
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 16 23:48:27 2008 +0100
+
+ Prepare 2009.01-rc1
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9e2a79b4c585ad31138fb90b68fd0234d64a8da8
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 16 23:13:46 2008 +0100
+
+ include/configs/at91cap9adk.h: fix typo.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 45ca04f2377361593151d2d4da51f8ba4832d233
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 16 22:32:25 2008 +0100
+
+ board/trab/memory.c: Fix compile problems.
+
+ Apply changes from commit 44b4dbed to board/trab/memory.c, too.
+
+ Actually we'd need a major cleanup here - as it turns out,
+ board/trab/memory.c is more or less a verbatim copy of
+ post/drivers/memory.c ... but then, trab is EOL anyway,r
+ so this is not worth the effort.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit ff49ea8977b56916edd5b1766d9939010e30b181
+Author: Scott Wood <scottwood@freescale.com>
+Date: Tue Dec 16 14:24:16 2008 -0600
+
+ NAND: Mark the BBT as scanned prior to calling scan_bbt.
+
+ Otherwise, recursion can occur if scan_bbt does not find a bad block
+ table, and tries to write one, and the attempt to erase the BBT area
+ causes a bad block check.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 584eedab66d0828f2d571a24b10526c4e65f547b
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Thu Dec 11 05:51:57 2008 +0300
+
+ jffs2: include <linux/mtd/compat.h> instead of defining own min_t
+
+ Include <linux/mtd/compat.h> header for min_t definition instead of
+ providing our own one. Removes warnings in case of OneNAND support
+ enabled.
+
+ Although I thinks it's a bit silly to include <linux/mtd/compat.h>
+ just for min_t...
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit b1ffecec37b57a59c139042267faac458e5324e9
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Wed Dec 3 23:04:37 2008 -0600
+
+ powerpc: fix io.h build warning with CONFIG_PHYS_64BIT
+
+ Casting a pointer to a phys_addr_t when it's an unsigned long long
+ on a 32-bit system without first casting to a non-pointer type
+ generates a compiler warning. Fix this.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit 6cdadcb3f1b6eac4a1c4256acaa1438413f95351
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 16 16:22:50 2008 +0100
+
+ trab: make trab_fkt standalone code independent of libgcc
+
+ Use our own local functions in lib_arm/ instead.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit aa1bcca3d2e22af4dea9f02132f9b56a30378ded
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 16 14:44:06 2008 +0100
+
+ post/Makefile: fix dependency problem with parallel builds
+
+ Parallel builds (using "make -jN") would occasionally fail with error
+ messages like
+ ppc_4xxFP-objdump: string.o: File format not recognized
+ or
+ post/libpost.a(cpu.o): In function `cpu_post_test':
+ /home/wd/git/u-boot/work/post/lib_ppc/cpu.c:130: undefined reference to `cpu_post_test_string'
+ or similar. We now make sure to run the 'postdeps" step before
+ attempting to build the specific POST libraries.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4a0f7538c5c0805fd9a791967bbabacc41deadd9
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 16 14:41:02 2008 +0100
+
+ Makefile: fix dependency problem with parallel builds
+
+ Parallel builds (using "make -jN") would occasionally fail with error
+ messages like
+ include/autoconf.mk:212: *** missing separator. Stop.
+ Line numbers and affected boards were changing. Obviously some
+ Makefiles included autoconf.mk while it was still being written to.
+ As a fix, we now write to a temporary file first and then rename it,
+ so that it is really ready to use as soon as it appears.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 455ae7e87f67c44e6aea68865c83acadd3fcd36c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 16 01:02:17 2008 +0100
+
+ Coding style cleanup, update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 84bc72d90c505fec3ef4b693995407a0bd4064e5
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Dec 11 18:39:08 2008 -0500
+
+ spi/stmicro: fix debug() display of cmd
+
+ The stmicro_wait_ready() func tries to show the actual opcode that was sent
+ to the device, but instead it displays the array pointer. Fix it to pull
+ out the opcode from the start of the array.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 5b3375ac8c36c29c87abb132fede0509eb21e5c9
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Dec 11 06:23:37 2008 -0500
+
+ env_sf: support embedded environments
+
+ If both CONFIG_ENV_SECT_SIZE and CONFIG_ENV_SIZE are defined, and the sect
+ size is larger than the env size, then it means the env is embedded in a
+ block. So we have to save/restore the part of the sector which is not the
+ environment. Previously, saving the environment in SPI flash in this
+ setup would probably brick the board as the rest of the sector tends to
+ contain actual U-Boot data/code.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit ecf5f077c8e77454f532eaac3e3afb7cfc48c62d
+Author: Timur Tabi <timur@freescale.com>
+Date: Wed Dec 3 11:28:30 2008 -0600
+
+ i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions
+
+ All implementations of the functions i2c_reg_read() and
+ i2c_reg_write() are identical. We can save space and simplify the
+ code by converting these functions into inlines and putting them in
+ i2c.h.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Acked-By: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e39cd81c44740d7355d277ed3d38536cbe1e003d
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Dec 5 15:36:14 2008 +0800
+
+ lib_ppc: rework the flush_cache
+
+ - It is possible to miss flush/invalidate the last
+ cache line, we fix it at here.
+ - add the volatile and memory clobber.
+
+ They are pointed by Scott Wood.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 63240ba88cd6a220057a0f28e5bf97f5b17ac84b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Sat Dec 13 17:20:28 2008 -0600
+
+ Introduce addr_map library
+
+ Add a library that helps in translating between virtual and physical
+ addresses. This library can be useful as a simple means to implement
+ map_physmem() and virt_to_phys() for platforms that need functionality
+ beyond the simple 1:1 mapping.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 65e43a10631537dcb92c302d36301a12308216c3
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Sat Dec 13 17:20:27 2008 -0600
+
+ Introduce virt_to_phys()
+
+ virt_to_phys() returns the physical address given a virtual. In most
+ cases this will be just the input value as the vast majority of
+ systems run in a 1:1 mode.
+
+ However in systems that are not running this way it should report the
+ physical address or ~0 if no mapping exists for the given virtual
+ address.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 45845301af3de8675c1f7bbc815c6de35452605a
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Sun Dec 7 22:12:50 2008 +0100
+
+ POST Make: fix the sub-dir dependencies missing.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 22525779cb51f1bbe4e96fea7b778de1935a5a69
+Author: Martin Michlmayr <tbm@cyrius.com>
+Date: Wed Aug 6 14:44:05 2008 +0300
+
+ Fix a typo in fw_env.config
+
+ Reported-by: Martin Michlmayr <tbm@cyrius.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit ba490b7761c62b549c222a9723e532dc801a3899
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Dec 1 16:22:45 2008 -0600
+
+ Remove unused CONFIG_ADDR_STREAMING defines
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit d16da93430520d3e46c1ab52eedacf36ab7a2311
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Nov 24 11:54:47 2008 -0600
+
+ cmd_mem: Remove unused variable
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 3aed3aa2c128ce9fb39ca3f4e9385a7499e93dbf
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Dec 14 10:29:39 2008 +0100
+
+ Fix new found CFG_
+
+ Also fix some minor typos.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0e0c862efe7279e9609db74d758cd1b84c6c7209
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Fri Sep 19 12:07:34 2008 +0200
+
+ Remove compiler warning: target CPU does not support interworking
+
+ This warning is issued by modern ARM-EABI GCC on non-thumb targets.
+
+ Signed-off-by: Vladimir Panfilov <pvr@emcraft.com>
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit cd6734510a9ff0f41c4a73567d4080ea0033d2c1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Nov 24 13:33:51 2008 +0100
+
+ Fix FIT and FDT support to have CONFIG_OF_LIBFDT and CONFIG_FIT independent
+
+ FDT support is used for both FIT style images and for architectures
+ that can pass a fdt blob to an OS (ppc, m68k, sparc).
+
+ For other architectures and boards which do not pass a fdt blob to an
+ OS but want to use the new uImage format, we just need FIT support.
+
+ Now we can have the 4 following configurations :
+
+ 1) FIT only CONFIG_FIT
+ 2) fdt blob only CONFIG_OF_LIBFDT
+ 3) both CONFIG_OF_LIBFDT & CONFIG_FIT
+ 4) none none
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 19ef4f7a6ef3b725aa9fe4b4f5fb676a84160172
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Dec 10 15:13:32 2008 +0100
+
+ ppc4xx: Disable EEPROM write access on PMC440 boards
+
+ This patch disables EEPROM wrtie access by default on PMC440 board.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 5b67a1439a73ba6c34007d9ff60a2c6aa90265df
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Dec 10 15:12:56 2008 +0100
+
+ ppc4xx: Fix Ethernet PHY LED configuration on PMC440 boards
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 71fa0714fe5134bc8718c38d5261d267e88582ba
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 18 16:36:12 2008 +0100
+
+ MIPS: Flush data cache upon relocation
+
+ This patch now adds a flush to the data cache upon relocation. The
+ current implementation is missing this. Only a comment states that it
+ should be done. So let's really do it now.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 44174343688dba32571a34550dba08971c65fef1
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 18 16:36:22 2008 +0100
+
+ MIPS: Add CONFIG_SKIP_LOWLEVEL_INIT
+
+ This patch adds the CONFIG_SKIP_LOWLEVEL_INIT option to start.S. This
+ enables support for boards where the lowlevel initialization is
+ already done when U-Boot runs (e.g. via OnChip ROM).
+
+ This will be used in the upcoming VCTH board support.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit db08ecaa6eb8176904b3bae103a85ee8f735dc40
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Nov 12 13:18:02 2008 +0100
+
+ MIPS: Add board_early_init_f() to init_sequence
+
+ This patch adds the board_early_init_f() call to the MIPS init
+ sequence. A weak dummy implementation is also added which can be
+ overridden by a board specific version.
+
+ This will be used by the upcoming VCTH board support.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 9d23fc584c4b7b8bb9ecbee48920b1b04b08fa1b
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Nov 12 13:18:19 2008 +0100
+
+ MIPS: Add onenand_init() to board.c and move nand_init()
+
+ This patch adds a call to onenand_init() for OneNAND support and moves
+ the nand_init() call to an earlier place, so that the environment can
+ be used from NAND and OneNAND.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit d8bbc51c7ba9b737a20984333d19fe28a3526431
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Dec 9 11:32:46 2008 +0900
+
+ sh: Update sh2/sh2a timer
+
+ Renesas SH2/SH2A timer broken.
+ This patch fix timer function.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit a319f1496210117b73198e3d889ffffaf6825d00
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Dec 5 07:27:37 2008 +0100
+
+ sh: r2dplus fix register access
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 4d4a96055f6917335a89dbdf2e5556fa5ac329f6
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Dec 2 07:40:03 2008 +0100
+
+ sh: r2dplus/lowlevel_init: coding style fix
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c54b9a42d8f5ab5b2a039b3a2e6fde8b427745e5
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Nov 25 11:05:19 2008 +0900
+
+ sh: Changed value of CACHE_OC_NUM_ENTRIES and CACHE_OC_WAY_SHIFT
+
+ SH4 is different a value of CACHE_OC_NUM_ENTRIES and
+ CACHE_OC_WAY_SHIFT every CPU.
+ This patch corrects these values.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit e9d5f35497885b3c65d494d09a525d443dcccd3b
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Nov 20 16:44:42 2008 +0900
+
+ sh: Update sh timer function
+
+ Change to write/readX function and fix timer problem.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit b81786cff476c41e332eaeb679158f6527cd67d4
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Nov 4 11:58:58 2008 +0900
+
+ sh: Migo-R: Update BSC value
+
+ A value of BSC CS4 was wrong, Fixed it.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 5783758fd260a02f44566ad8f29f899565cd0403
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Mon Nov 17 16:52:09 2008 +0900
+
+ sh: Update ms7722se board config
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 15e2697c9f7fb2ba672a1a70f07cd6d9d4e92b51
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Mon Nov 17 16:53:09 2008 +0900
+
+ sh: Update SuperH serial driver
+
+ The address of SCFSR register is wrong at SH7720/SH7721.
+ This patch fix this.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 9a1d3557dcd47365c12eeab584b822e57d994352
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Nov 11 22:20:15 2008 +0100
+
+ sh: fix rsk7203 and MigoR out of tree build
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 1951f847f0a851853871b613ad7cf21a5242226c
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Dec 10 14:41:25 2008 +0100
+
+ ppc4xx: Update TEXT_BASE for CPCI405 boards
+
+ This patch fixes building U-Boot for CPCI405 boards.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8c92af7b2fbd60ae87379477f93c7ec9441b7452
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Dec 9 20:08:01 2008 +0100
+
+ ppc4xx: Remove some features from ALPR to fit into 256k again
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3b089e4f889a2902449d55e081c886ae607cae89
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Dec 10 10:32:59 2008 +0100
+
+ UBI: Set ubi_dev.type back to DEV_TYPE_NONE upon failing initialization
+
+ With this patch we set the type back to NONE upon failing UBI partition
+ initialization. Otherwise further calls to the UBI subsystem would try
+ to really access the non-existing UBI partition.
+
+ Thanks to Michael Lawnick for pointing this out.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 817329351639a8895cd9b87b33aeff043f3d5a44
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Dec 10 10:28:33 2008 +0100
+
+ UBI: Return -ENOMEM upon failing malloc
+
+ Return with correct error code (-ENOMEM) from ubi_attach_mtd_dev() upon
+ failing malloc().
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2145188bea2df8f2b47a87ec3071b55027e8d0ae
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Tue Dec 9 23:34:15 2008 -0800
+
+ Fix compile error in building MBX860T.
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 8fab49ea911fe925392fa5afcc9bc7373a3d0cee
+Author: Michal Simek <monstr@monstr.eu>
+Date: Tue Nov 25 11:42:20 2008 +0100
+
+ microblaze: Remove XUPV2P board
+
+ ---
+
+ Microblaze platforms use generic settings and to have
+ many platforms is confusing that's why I decided to remove this
+ platform from U-BOOT. ml401 tree is sufficient for covering
+ all Microblaze platforms.
+
+ This change will go through microblaze custodian tree.
+
+commit 99ba6f353582720defff6e6e6761dc455a207d31
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Nov 24 18:25:41 2008 +0100
+
+ microblaze: Remove CONFIG_LIBFDT due to error in common files
+
+commit e7d591e823a991513833af7030468409e25a3b13
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Nov 24 11:43:00 2008 +0100
+
+ microblaze: Fix ml401 uart16550 setting
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit c85ff0553a8cfbcca51c15b947e1ed55d3810a39
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Nov 24 11:38:22 2008 +0100
+
+ microblaze: Set up relocation is done
+
+commit bcb6dd9187d4b23c748704767bd12d20c829e996
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Dec 9 23:20:31 2008 -0500
+
+ tools/netconsole: new script for working with netconsole over UDP
+
+ While the doc/README.NetConsole does have a snippet for people to
+ create their own netcat script, it's a lot easier to make a simple
+ dedicated script and tell people to use it.
+
+ Also spruce it up a bit to make it user friendly.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8c5170a7d088601d5f30d85093388dab1f1e8ec0
+Author: Sonic Zhang <Sonic.Zhang@analog.com>
+Date: Tue Dec 9 23:20:18 2008 -0500
+
+ fs/fat: handle FAT on SATA
+
+ The FAT file system driver should also handle FAT on SATA devices.
+
+ Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 4cd8ed40615a7d741ef2f09ee53779ec6907b8a6
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Tue Dec 9 23:26:31 2008 -0800
+
+ Fix compile error in building MBX860T.
+ Bug was introduced in 9eb79bd8856bcab896ed5e1f1bca159807a124dd
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 97a24a78ee6f34b89b821cb70eda1cf34aa11d97
+Author: Jerry Van Baren <gvb.uboot@gmail.com>
+Date: Mon Nov 24 08:15:02 2008 -0500
+
+ libfdt: Fix redefined uintptr_t warning for USE_HOSTCC
+
+ Compiling U-Boot in an old OS environment (RedHat-7.3 :-) gives the
+ following warnings from FDT:
+
+ include/libfdt_env.h:50: warning: redefinition of 'uintptr_t'
+ /usr/include/stdint.h:129: warning: 'uintptr_t' previously declared here
+
+ Fix: Protect the definition of uintptr_t when compiling on the host
+ system.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 1fc2b165c51d6f40c8d505f1b3eaefdb6599b17b
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sat Nov 22 08:43:29 2008 +1100
+
+ Moved sc520 PCI definitions to stand-alone file
+
+ Signed Off By: Graeme Russ <graeme.russ@gmail.com>
+
+commit 1f5070c0c18fa5684bfce09c8abdf10c04ed48fa
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sat Nov 22 08:43:21 2008 +1100
+
+ Fixed path to sc520 SSI include file
+
+ Signed Off By: Graeme Russ <graeme.russ@gmail.com>
+
+commit d4f70da544c33db3e4fce6473dea4ecca4322545
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Fri Nov 21 06:28:05 2008 +1100
+
+ Fixed build error due to #define of _LINUX_STRING_H_ in 82559_eeprom.c
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit c034075a713b60e654c64e88e87da29440f31bb4
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Nov 12 13:30:10 2008 +0100
+
+ serial: Add vcth UART driver
+
+ This patch adds the UART driver for the upcoming VCTH board support.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 142a80ffc3b537a9c45acd2444a42a77f147c602
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Thu Nov 13 19:49:36 2008 +0300
+
+ jffs2: cache data_crc results
+
+ As we moved data_crc() invocation from jffs2_1pass_build_lists() to
+ jffs2_1pass_read_inode() data_crc is going to be calculated on each
+ inode access. This patch adds caching of data_crc() results. There
+ is no significant improvement in speed (because of flash access
+ caching added in previous patch I think, crc in RAM is really fast)
+ but this patch impacts memory usage -- every b_node structure uses
+ 12 bytes instead of 8.
+
+ Signed-off-by: Alexey Neyman <avn@emcraft.com>
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 9b7076229ec6a958bd835ab70745f7676297ce82
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Thu Nov 13 19:49:35 2008 +0300
+
+ jffs2: summary support
+
+ This patch adds support for reading fs information from summary
+ node instead of scanning full eraseblock.
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 70741004dc28946cd82c7af6789c4ddb3fc94526
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Thu Nov 13 19:49:34 2008 +0300
+
+ jffs2: add buffer to cache flash accesses
+
+ With this patch JFFS2 code allocates memory buffer of max_totlen size
+ (size of the largest node, calculated during scan time) and uses it to
+ store entire node. Speeds up loading. If malloc fails we use old ways
+ to do things.
+
+ Signed-off-by: Alexey Neyman <avn@emcraft.com>
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 8a36d31f72411144ac0412ee7e1880e801acd754
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Thu Nov 13 19:49:33 2008 +0300
+
+ jffs2: rewrite jffs2 scanning code based on Linux one
+
+ Rewrites jffs2_1pass_build_lists() function in style of Linux's
+ jffs2_scan_medium() and jffs2_scan_eraseblock().
+ This includes:
+ - Caching flash acceses
+ - Smart dealing with free space
+
+ Signed-off-by: Alexey Neyman <avn@emcraft.com>
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit e0b5532579eda8b4629f1b4f6e49c3cc60f52237
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Thu Nov 13 19:49:32 2008 +0300
+
+ jffs2: add sector_size field to part_info structure
+
+ This patch adds sector_size field to part_info structure (used
+ by new JFFS2 code).
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit f73846956778a7dfee83403ef9747aff77198848
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Thu Nov 13 19:49:31 2008 +0300
+
+ jffs2: fix searching for latest version in jffs2_1pass_list_inodes()
+
+ We need to update i_version inside cycle to find really latest version
+ inside jffs2_1pass_list_inodes(). With that fixed we can use isize inside
+ dump_inode() instead of calling expensive jffs2_1pass_read_inode().
+
+ Signed-off-by: Alexey Neyman <avn@emcraft.com>
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 1113cb764b3da256ef8a1f9539f4efbe221ff3c4
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 9 23:13:51 2008 +0100
+
+ evb64260: fix "cast to pointer from integer of different size" warnings
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d2776827315c3d469b8cb4cec14d58877798daa2
+Author: Stefan Althoefer <stefan.althoefer@web.de>
+Date: Sun Dec 7 19:39:11 2008 +0100
+
+ USB: descriptor handling
+
+ Hi,
+
+ I found a bug when working with the u-boot USB subsystem on IXP425 processor
+ (big endian Xscale aka ARMv5).
+ I recognized that the second usb_endpoint_descriptor of the attached memory
+ stick was corrupted.
+
+ The reason for this are the packed structures below (either u-boot and
+ u-boot-usb):
+
+ --------------
+ /* Endpoint descriptor */
+ struct usb_endpoint_descriptor {
+ unsigned char bLength;
+ unsigned char bDescriptorType;
+ unsigned char bEndpointAddress;
+ unsigned char bmAttributes;
+ unsigned short wMaxPacketSize;
+ unsigned char bInterval;
+ unsigned char bRefresh;
+ unsigned char bSynchAddress;
+
+ } __attribute__ ((packed));
+ /* Interface descriptor */
+ struct usb_interface_descriptor {
+ unsigned char bLength;
+ unsigned char bDescriptorType;
+ unsigned char bInterfaceNumber;
+ unsigned char bAlternateSetting;
+ unsigned char bNumEndpoints;
+ unsigned char bInterfaceClass;
+ unsigned char bInterfaceSubClass;
+ unsigned char bInterfaceProtocol;
+ unsigned char iInterface;
+
+ unsigned char no_of_ep;
+ unsigned char num_altsetting;
+ unsigned char act_altsetting;
+ struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS];
+ } __attribute__ ((packed));
+ ------------
+
+ As usb_endpoint_descriptor is only 7byte in length, the start of all
+ odd ep_desc[] structures is not word aligned. This makes wMaxPacketSize
+ of these structures also not word aligned.
+
+ ARMv5 Architecture however does not support non-aligned multibyte
+ data type (see A2.8 of ARM Architecture Reference Manual).
+
+ Signed-off-by: Stefan Althoefer <stefan.althoefer@web.de>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit 4c253fdb2a175ea3472c38a1455a16faa58e81f0
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Dec 9 10:27:33 2008 -0600
+
+ drivers/fsl_pci_init: Fix compile warning
+
+ fsl_pci_init.c: In function 'fsl_pci_setup_inbound_windows':
+ fsl_pci_init.c:122: warning: comparison is always true due to limited range of data type
+
+ The check only makes sense if we are CONFIG_PHYS_64BIT
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit dedacc18a8c2b3951581eb721fa055a4e0ac4845
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Dec 7 09:45:35 2008 +0100
+
+ usbtty/omap: update to current API
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit ee2e9ba917a62cc2e3a484bb79c8da0e01cb93ed
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Tue Dec 9 17:52:05 2008 +0100
+
+ video: fix FADS823 and RRvision compiling issues
+
+ Since commit 561858ee building for FADS823 and RRvision
+ doesn't work. Let's include version.h and timestamp.h
+ unconditionally to fix the problem.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 2d2e05727fe4013f807ffa814dff0e75259a1db4
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Dec 2 10:53:47 2008 +0100
+
+ UBI: Fix size parsing in "ubi create"
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2ee951ba2ac9874d2a93d52e7a187d3184be937e
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Nov 27 14:07:09 2008 +0100
+
+ UBI: Enable re-initializing of the "ubi part" command
+
+ With this patch now, the user can call "ubi part" multiple times to
+ re-connect the UBI device to another MTD partition.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9def12cae33d2d3ea2dd56b197fd3dfb3ad60bf4
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Nov 27 14:05:15 2008 +0100
+
+ MTD: Fix problem based on non-working relocation (list head mtd_partitions)
+
+ Don't use LIST_HEAD() but initialize the struct via INIT_LIST_HEAD() upon
+ first call of add_mtd_partitions(). Otherwise this won't work on platforms
+ where the relocation is broken (like MIPS or PPC).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5e3ab68e9acf9edf304b8aa32ad7e005483a2c47
+Author: Trent Piepho <tpiepho@freescale.com>
+Date: Wed Nov 12 17:29:48 2008 -0800
+
+ Section name should be ".data", not "data"
+
+ Signed-off-by: Trent Piepho <tpiepho@freescale.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 7fa6a2f3b66579dea8bc1a9177646e1141731b15
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 9 00:39:08 2008 +0100
+
+ MAKEALL: Automatically use parallel builds
+
+ Add logic to the MAKEALL script to determine the number of CPU cores
+ on the system, and run a parallel build if there is more than one.
+ Usually this significantrly accelerates builds.
+
+ Allow to manually adjust the number of parallel make jobs by using
+ the "BUILD_NCPUS" environment variable.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 268405fa7c44156c5192a70779920c70906af8d6
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Dec 9 00:24:30 2008 +0100
+
+ vxworks.h: Fix build problem introduced by commits 29a4c24d/e9084b23
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 153176a9414120ca1736f3cc4951623d6e14e6af
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Nov 11 06:08:59 2008 +0100
+
+ avr32/bootm: remove unused variable 'ret'
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 434c51a5e62f608a2a78ed5398ac43a1c77cc183
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Nov 12 13:06:48 2008 -0600
+
+ Remove unneeded CONFIG_SHELL references
+
+ Make should be using the bash shell by default which makes
+ CONFIG_SHELL unnecessary
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit cf7a7b99794bac936899819b95539be1dbd71708
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Nov 12 12:33:20 2008 -0600
+
+ Use bash for default GNU Make shell application
+
+ Some Make script commands rely on bash-specific features like brace
+ expansion, so default to bash for the SHELL variable with a fallback
+ to the standard sh shell
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 4b530018764934ad5689196e9aa5714a6f4d1a6c
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Nov 12 09:50:45 2008 +0100
+
+ jffs2: rename devices_init () in common/jffs2.c
+
+ rename devices_init () in common/jffs2.c to
+ jffs2_devices_init (), because there is also a
+ devices_init () in common/devices.c.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit af5eb847a10f1037590001355d88bab3fe7be48b
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Mon Nov 10 12:46:20 2008 +0000
+
+ SPARC: Fixed compiler error introduced by commit c160a9544743
+
+ This patch fixes a build error for the SPARC platform. It was
+ introduced by commit c160a9544743e80e8889edb2275538e7764ce334.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+
+commit 4c60259899aa00f59db0d936b8807f9a26411c0f
+Author: Gary Jennejohn <garyj@denx.de>
+Date: Sun Nov 9 12:50:59 2008 +0100
+
+ mgsuvd add the board-specific part of the HDLC driver
+
+ Signed-off-by: Gary Jennejohn <garyj@denx.de>
+
+commit 534a4359666af48bd69a3743d8a8c2bdb1d3ec70
+Author: Gary Jennejohn <garyj@denx.de>
+Date: Sun Nov 9 12:45:03 2008 +0100
+
+ mgcoge add the board-specific part of the HDLC driver
+
+ Signed-off-by: Gary Jennejohn <garyj@denx.de>
+
+commit 135f5534538bb8ea4f38a7030da12187d22ef7e0
+Author: Gary Jennejohn <garyj@denx.de>
+Date: Sun Nov 9 12:36:15 2008 +0100
+
+ keymile add the common parts of the HDLC driver
+
+ This implements the ICN protocol used across the backplane and is
+ needed by all the keymile boards.
+
+ Signed-off-by: Gary Jennejohn <garyj@denx.de>
+
+commit 1cb82a9207a550557399eabc7fe47f21bbd9ddf8
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Nov 7 22:46:22 2008 +0100
+
+ drivers/bios_emulator: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit bcdf1d2cf6b24fb905fd7da80da4b3c65a7995b5
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Thu Nov 6 14:01:51 2008 -0500
+
+ common/cmd_ide.c: Corrected endian order printing for compact flash serial number.
+
+ Corrected endian order printing for compact flash serial number.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+
+commit 16a28ef219c27423a1ef502f19070c4d375079b8
+Author: Gary Jennejohn <garyj@denx.de>
+Date: Thu Nov 6 15:04:23 2008 +0100
+
+ IOMUX: Add console multiplexing support.
+
+ Modifications to support console multiplexing. This is controlled using
+ CONFIG_SYS_CONSOLE_MUX in the board configuration file.
+
+ This allows a user to specify multiple console devices in the environment
+ with a command like this: setenv stdin serial,nc. As a result, the user can
+ enter text on both the serial and netconsole interfaces.
+
+ All devices - stdin, stdout and stderr - can be set in this manner.
+
+ 1) common/iomux.c and include/iomux.h contain the environment setting
+ implementation.
+ 2) doc/README.iomux contains a somewhat more detailed description.
+ 3) The implementation in (1) is called from common/cmd_nvedit.c to
+ handle setenv and from common/console.c to handle initialization of
+ input/output devices at boot time.
+ 4) common/console.c also contains the code needed to poll multiple console
+ devices for input and send output to all devices registered for output.
+ 5) include/common.h includes iomux.h and common/Makefile generates iomux.o
+ when CONFIG_SYS_CONSOLE_MUX is set.
+
+ Signed-off-by: Gary Jennejohn <garyj@denx.de>
+
+commit 774ce72026f74ac9641bcbbc588b20f2e13f7ab8
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Nov 4 16:03:46 2008 -0500
+
+ strings: use puts() rather than printf()
+
+ When running `strings` on really long strings, the stack tends to get
+ smashed due to printf(). Switch to puts() instead since we're only passing
+ the data through.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b03150b52e3c491a86a3cc0945274f0e8f9872e7
+Author: Niklaus Giger <niklaus.giger@member.fsf.org>
+Date: Mon Nov 3 22:16:18 2008 +0100
+
+ Use new CONFIG_SYS_VXWORKS parameters for Netstal boards
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
+
+commit 29a4c24de99d8cb4ac32991c04cab87ed94ca1f9
+Author: Niklaus Giger <niklaus.giger@member.fsf.org>
+Date: Mon Nov 3 22:15:34 2008 +0100
+
+ cmd_elf.c: Cleanup bootvx and handle new CONFIG_SYS_VXWORKS parameters
+
+ - fix size too small by one in sprintf
+ - changed old (pre 2004) device name ibmEmac to emac
+ - boot device may be overriden in board config
+ - servername may be defined in board config
+ - additional parameters may be defined in board config
+ - fixed some line wrappings
+ - replaced redundant MAX define by max
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
+
+commit e9084b23d16102f44ace24379a1c0c352497ef80
+Author: Niklaus Giger <niklaus.giger@member.fsf.org>
+Date: Mon Nov 3 22:14:36 2008 +0100
+
+ Add vxworks.h to handle CONFIG_SYS_VXWORKS parameters
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
+
+commit 0b2f4ecad473d785959c7976f20d2a00bd0ee01f
+Author: Niklaus Giger <niklaus.giger@member.fsf.org>
+Date: Mon Nov 3 22:13:47 2008 +0100
+
+ README: Document CONFIG_SYS parameters for vxworks
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
+
+commit ace514837cac656e29c37a19569cb8ea83071126
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Oct 31 11:12:38 2008 -0500
+
+ lcd: Let the board code show board-specific info cleanup
+
+ remove unneeded version.h from lcd.c
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 561858ee7d0274c3e89dc98d4d0698cb6fcf6fd9
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Nov 3 09:30:59 2008 -0600
+
+ Update U-Boot's build timestamp on every compile
+
+ Use the GNU 'date' command to auto-generate a new U-Boot
+ timestamp on every compile.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 83ad179e2f0f625b88adb8ef5696709e46fb9077
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Thu Dec 4 22:25:57 2008 +0100
+
+ Remove redundant armv4 flag from arm926ejs compile flags
+
+ Currently the arm926ejs tree has the armv4 option set during compilation.
+ This flag does not belong here because a arm926 CPU is always a armv5 CPU.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 89a7a87f084c657f8e32b513a77b50eca07e17ec
+Author: Nicolas Ferre <nicolas.ferre@atmel.com>
+Date: Sat Dec 6 13:11:14 2008 +0100
+
+ at91: Choose environment variables location within make config target
+
+ This patch adds the possiblity to choose the media where the environment will
+ be located. This allow to choose this fundamental configuration without editing
+ config files.
+
+ Documentation file added.
+
+ Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
+ Acked-by: Stelian Pop <stelian@popies.net>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1450c4a6682378567030414a9f1198c39b7730c7
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Mon Nov 3 15:30:34 2008 +0100
+
+ lwmon, tqm8xx: Fix build errors
+
+ Commit 6b59e03e0237a40a2305ea385defdfd92000978b
+ lcd: Let the board code show board-specific info
+
+ introduced some bugs which prevent U-Boot building
+ for lwmon board if CONFIG_LCD_INFO_BELOW_LOGO will
+ be defined in the board configuration.
+
+ Also "LCD enabled" building for TQM823L doesn't work
+ since this commit.
+
+ This patch fixes above-mentioned issues.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit bfa0af6b22ff25b0719a8910f9b6d1f975aa6fb0
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Nov 2 01:18:18 2008 -0400
+
+ ignore .gdb_history files
+
+ When using gdb, history files will often get generated. So ignore them.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c8aa7dfc18f7cc90d0aea6c7becbb67dfc5bba4b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Oct 31 12:26:55 2008 +0100
+
+ FPGA: move fpga drivers to drivers/fpga
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6a86bb6c25376f0358478219fa28d7c84dd01ed0
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Dec 1 16:29:38 2008 -0600
+
+ net: Fix TftpStart() ip:filename bug
+
+ The TftpStart() function modifies the 'BootFile'
+ string when 'BootFile' contains both an IP address
+ and filename (eg 1.2.3.4:/path/file). This causes
+ subsequent calls to TftpStart to incorrectly parse
+ the TFTP filename and server IP address to use.
+ For example:
+
+ => tftp 0x100000 10.52.0.62:/home/ptyser/non_existant
+ Speed: 100, half duplex
+ Using eTSEC1 device
+ TFTP from server 10.52.0.62; our IP address is 10.52.253.79
+ ^^^^^^^^^^ CORRECT
+ Filename '/home/ptyser/non_existant'.
+ ^^^^^^^^^^^^^^^^^^^^^^^^^ CORRECT
+ Load address: 0x100000
+ Loading: *
+ TFTP error: 'File not found' (1)
+ Starting again
+
+ eTSEC2: No link.
+ Speed: 100, half duplex
+ Using eTSEC1 device
+ TFTP from server 10.52.0.33; our IP address is 10.52.253.79
+ ^^^^^^^^^^ WRONG
+ Filename '10.52.0.62'.
+ ^^^^^^^^^^ WRONG
+ Load address: 0x100000
+ Loading: *
+ TFTP error: 'File not found' (1)
+ Starting again
+
+ TftpStart() was modified to not modify the 'BootFile' string.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d32c5be50bf0600bfdc54223ef341ee9c63db445
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Dec 1 16:26:21 2008 -0600
+
+ net: Add additional IP fragmentation check
+
+ Ignore IP packets which have the "more fragments" flag bit
+ set. This flag indicates the IP packet is fragmented and
+ must be ignored by U-Boot.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit e0c07b868cab405ab4b5335a0247899bfc5ea0b6
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Dec 1 16:26:20 2008 -0600
+
+ net: Define IP flag field values
+
+ These defines were pulled from the "Add simple
+ IP/UDP fragmentation support" patch from Frank
+ Haverkamp <haver@vnet.ibm.com>.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 23afaba65ec5206757e589ef334a8b38168c045f
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Tue Dec 2 10:31:04 2008 +0100
+
+ net: tsec: Fix Marvell 88E1121R phy init
+
+ This patch tries to ensure that phy interrupt pin
+ won't be asserted after booting. We experienced
+ following issues with current 88E1121R phy init:
+
+ Marvell 88E1121R phy can be hardware-configured
+ to share MDC/MDIO and interrupt pins for both ports
+ P0 and P1 (e.g. as configured on socrates board).
+ Port 0 interrupt pin will be shared by both ports
+ in such configuration. After booting Linux and
+ configuring eth0 interface, port 0 phy interrupts
+ are enabled. After rebooting without proper eth0
+ interface shutdown port 0 phy interrupts remain
+ enabled so any change on port 0 (link status, etc.)
+ cause assertion of the interrupt. Now booting Linux
+ and configuring eth1 interface will cause permanent
+ phy interrupt storm as the registered phy 1 interrupt
+ handler doesn't acknowledge phy 0 interrupts. This
+ of course should be fixed in Linux driver too.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 2e4970d8109d690adcf615d9e3cac7b5b2e8eaed
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Dec 2 12:59:51 2008 -0600
+
+ net: Fix download command parsing
+
+ When CONFIG_SYS_HUSH_PARSER is defined network download
+ commands with 1 argument in the format 'tftp "/path/file"'
+ do not work as expected. The hush command parser strips
+ the quotes from "/path/file" which causes the network
+ commands to interpret "/path/file" as an address
+ instead of the intended filename.
+
+ The previous check for a leading quote in netboot_common()
+ was replaced with a check which ensures only valid
+ numbers are treated as addresses.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3c2c2f427905040c1513d0c51d637689cba48346
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Thu Nov 27 22:30:27 2008 +0100
+
+ Remove non-ascii characters from fat code
+
+ This code contains some non-ascii characters in comment lines and code.
+ Most editors do not display those characters properly and editing those
+ files results always in diffs at these places which are usually not required
+ to be changed at all. This is error prone.
+
+ So, remove those weird characters and replace them by normal C-style
+ equivalents for which the proper defines were already in the header.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit dc889e865356497d3e495570118c2245ebce2631
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Nov 28 20:16:58 2008 +0800
+
+ 85xx: fix the wrong DDR settings for MPC8572DS
+
+ The default DDR freq is 400MHz or 800M data rate,
+ the old settings is pure wrong for the default case.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 9df59533f77de2829b4b66e5b7620e04edaa391c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 24 10:29:26 2008 -0600
+
+ 85xx: init gd as early as possible
+
+ Moved up the initialization of GD so C code like set_tlb() can use
+ gd->flags to determine if we've relocated or not in the future.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit aed461af81012a398a205e9be67ab37667491838
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 24 10:29:25 2008 -0600
+
+ 85xx: Fix relocation of CCSRBAR
+
+ If the virtual address for CCSRBAR is the same after relocation but
+ the physical address is changing we'd end up having two TLB entries with
+ the same VA. Instead we new us the new CCSRBAR virt address + 4k as a
+ temp virt address to access the old CCSRBAR to relocate it.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit ea154a1781135d822eedee7567cc156089eae93c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 24 10:25:14 2008 -0600
+
+ FSL: Moved BR_PHYS_ADDR for localbus to common header
+
+ The BR_PHYS_ADDR macro is useful on all machines that have local bus
+ which is pretty much all 83xx/85xx/86xx chips.
+
+ Additionally most 85xx & 86xx will need it if they want to support
+ 36-bit physical addresses.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 9427ccde0355a2ebf47454e8e1be59f5b9864e08
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Dec 1 13:47:12 2008 -0600
+
+ 85xx: Add PORDEVSR_PCI1 define
+
+ Add define used to determine if PCI1 interface is in PCI or PCIX mode.
+
+ Convert users of the old PORDEVSR_PCI constant to use MPC85xx_PORDEVSR_PCI1
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 35db1c6d34b57ae15e99cf03c8e8f8a6148d74f3
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Fri Nov 21 19:24:22 2008 -0600
+
+ drivers/fsl_pci_init: Fix inbound window mapping bug
+
+ The current code will cause the creation of a 4GB window
+ starting at 0 if we have more than 4GB of RAM installed,
+ which overlaps with PCI_MEM space and causes pci_bus_to_phys()
+ to return erroneous information. Limit the size to 4GB - 1;
+ which causes the code to create one 2GB and one 1GB window
+ instead.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 5a105a333dab6a23e92d763ce76d6f31d57f45df
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Nov 20 15:36:48 2008 -0600
+
+ Removed unused CONFIG_L1_INIT_RAM symbol.
+
+ Prevent further viral propogation of the unused
+ symbol CONFIG_L1_INIT_RAM by just removing it.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 7008d26a40a76f90cae5824c812cfed449fb97b8
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Oct 29 09:21:44 2008 -0500
+
+ fsl ddr skip interleaving if not supported.
+
+ Removed while(1) hang if memctl_intlv_ctl is set wrong.
+ Remove embedded tabs from strings.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit dd332e18d082de75eca3fc2c7c778f5d4571a096
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Thu Nov 13 18:08:57 2008 +0100
+
+ 85xx: socrates: fix DDR SDRAM tlb entry configuration
+
+ since commit be0bd8234b9777ecd63c4c686f72af070d886517
+ tlb entry for socrates DDR SDRAM will be reconfigured
+ by setup_ddr_tlbs() from initdram() causing an
+ inconsistency with previously configured DDR SDRAM tlb
+ entry from tlb_table:
+
+ socrates>l2cam 7 9
+ IDX PID EPN SIZE V TS RPN U0-U3 WIMGE UUUSSS
+ 7 : 00 00000000 256MB V 0 -> 0_00000000 0000 -I-G- ---RWX
+ 8 : 00 00000000 256MB V 0 -> 0_00000000 0000 ----- ---RWX
+ 9 : 00 10000000 256MB V 0 -> 0_10000000 0000 ----- ---RWX
+
+ This patch makes the presence of the DDR SDRAM tlb entry in
+ the tlb_table dependent on CONFIG_SPD_EEPROM to avoid this
+ inconsistency.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit a2cd50ed6ef0ac6b127b3d6db756979a8336718d
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Nov 11 10:17:10 2008 -0600
+
+ 85xx: Add CPU 2 errata workaround to all 8548 boards
+
+ All mpc8548-based boards should implement the suggested workaround
+ to CPU 2 errata. Without the workaround, its possible for the
+ 8548's core to hang while executing a msync or mbar 0 instruction
+ and a snoopable transaction from an I/O master tagged to make
+ quick forward progress is present.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit e57f0fa1333cdf3ca36110aac2900712a5f82976
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Oct 28 17:53:45 2008 +0800
+
+ 85xx: the DDR tlb is missed for the !CONFIG_SPD_EEPROM case
+
+ we need TLB entry for DDR at !SPD case.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 9b0ad1b1c7a15ff674978705c7c52264978dc5d8
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Oct 28 17:53:38 2008 +0800
+
+ 85xx: remove the unused ddr_enable_ecc in the board file
+
+ The DDR controller of 8548/8544/8568/8572/8536 processors
+ have the ECC data init feature, and the new DDR code is
+ using the feature, and we don't need the way with DMA to
+ init memory any more.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 4a129a57d923f7c15aa1f567028a80a32d66a100
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Nov 30 19:36:53 2008 +0100
+
+ at91rm9200dk: Fix typo
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ed3b18e05c9a8ffa5fb643da9bcec7452e5d5e01
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Nov 30 19:36:50 2008 +0100
+
+ AT91: remove non supported board AT91RM9200DF macro
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit bd876772ee04095e5dd943d97515a1f14bad4b1c
+Author: Ilko Iliev <iliev@ronetix.at>
+Date: Tue Dec 2 17:27:54 2008 +0100
+
+ mtd/dataflash.c: fix a problem with the last partition
+
+ This patch fix the problem that only the [NB_DATAFLASH_AREA - 1] dataflash
+ partition can be defined to use the area to the end of dataflash size.
+ Now it is possible to have only one dataflash partition from 0 to the end
+ of of dataflash size.
+
+ Signed-off-by: Ilko Iliev <iliev@ronetix.at>
+
+commit 03f797793b124dccaae145b977d15d6cb9e74504
+Author: Ilko Iliev <iliev@ronetix.at>
+Date: Tue Dec 2 17:20:17 2008 +0100
+
+ fix some coding style violations.
+
+ This patch fix some coding style violations.
+
+ Signed-off-by: Ilko Iliev <iliev@ronetix.at>
+
+commit 5e46b1e54112f4b7fd5185665e571510132c12a7
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Nov 27 14:11:37 2008 +0100
+
+ OneNAND: Add missing mtd info struct before calling onenand_erase()
+
+ Without this patch "saveenv" crashes when MTD partitions are enabled (e.g.
+ for use in UBI) via CONFIG_MTD_PARTITIONS.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 29382d4064fbaff5daacff4c3209370fa5713966
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Thu Nov 20 16:43:52 2008 -0600
+
+ mpc8641: Fix error in README
+
+ I made some updates to the code that didn't make it into the
+ README - fix this
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 801a194616d95e6fc426a176d9615ccbf9876c7f
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Nov 20 12:01:02 2008 -0600
+
+ Removed unused CONFIG_L1_INIT_RAM symbol.
+
+ Prevent further viral propogation of the unused
+ symbol CONFIG_L1_INIT_RAM by just removing it.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit f698738e46cb461e28c2d58228bb34a2fcf5a475
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Nov 20 14:02:56 2008 -0600
+
+ 86xx: Fix non-64-bit compilation problems.
+
+ Introducing 64-bit (36-bit) support for the MPC8641HPCN
+ failed to accomodate the other two 86xx boards.
+ Introduce definitions for CONFIG_SYS_CCSRBAR_PHYS_{LOW,HIGH}
+ CONFIG_SYS_CCSR_DEFAULT_DBAT{U,L} and CONFIG_SYS_CCSR_DEFAULT_IBAT{U,L}
+ with nominal 32-bit values.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Acked-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit bebfc6ef3ec994c8e18783269b1d8d41f8e38afd
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date: Wed Nov 26 17:40:37 2008 +0100
+
+ Remove obsolete command (apply afte USB style patch, 80 chars strict)
+
+ Remove USB obsolete commmand
+
+ Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit de39f8c19d7c12017248c49d432dcb81db68f724
+Author: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+Date: Wed Nov 26 17:41:34 2008 +0100
+
+ USB style patch, 80 chars strict
+
+ USB Code style patch
+
+ Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit d10c5a87cb8affbb4d35a311370316d4383d598e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Nov 7 22:46:21 2008 +0100
+
+ drivers/usb: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit 2077e348c2a84901022ad95311b47b70361e6daa
+Author: Scott Wood <scottwood@freescale.com>
+Date: Tue Nov 25 10:47:02 2008 -0600
+
+ NAND: Fix misplaced return statement in nand_{read,write}_skip_bad().
+
+ This caused the operation to be needlessly repeated if there were
+ no bad blocks and no errors.
+
+ Signed-off-by: Valeriy Glushkov <gvv@lstec.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 89295028e7d8f7a524f485328279d72fdb102385
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Nov 24 12:09:50 2008 +0100
+
+ ppc4xx: ml300 remove Xilinx BSP from ml300 folder
+
+ This BSP should be outside u-boot source tree.
+ The second reason is that xilinx ppc405 was moved to generic platform.
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 24eea623d4974a169026a975ba12fb23d48154b1
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Nov 24 15:11:10 2008 +0100
+
+ ppc4xx: Remove unused features
+
+ This patch disables some unused features from the PCI405 configuration
+ to keep U-Boot image size below 192k.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0c2385c3bb51f5d3911fce1ec4720db86b534c2b
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Nov 24 15:11:09 2008 +0100
+
+ ppc4xx: Use correct io accessors for PCI405
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 348c849d86a6f0785752b9bc497a34658713d1d1
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Nov 24 15:11:08 2008 +0100
+
+ ppc4xx: Remove unused code from PCI405 code
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 633639587e3596f0dbf5e6247dd3faf80b1d9063
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Nov 20 09:59:09 2008 +0100
+
+ powerpc, keymile boards: extract identical config options
+
+ This patch extracts the identical config options for the
+ keymile boards mgcoge, mgsuvd and kmeter1 in a new
+ common config file keymile-common.h.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 9482a8e3d6ac766d90e5059dce777b1e4c868a30
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Nov 21 08:29:40 2008 +0100
+
+ powerpc: keymile: Add a check for the PIGGY debug board
+
+ Check the presence of the PIGGY on the keymile boards mgcoge,
+ mgsuvd and kmeter1. If the PIGGY is not present, dont register
+ this Ethernet device.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 58c696eed839af894e0265064669c402dc28b371
+Author: Wolfgang Denk <wd@xpert.denx.de>
+Date: Mon Nov 24 21:50:59 2008 +0100
+
+ AT91RM9200DK: fix broken boot from NOR flash
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8052352f20b33bef8f9872fc983eac73d4693c38
+Author: Jens Scharsig <esw@bus-elektronik.de>
+Date: Tue Nov 18 10:48:46 2008 +0100
+
+ at91rm9200: fix broken boot from nor flash
+
+ This patch fix the broken boot from NOR Flash on AT91RM9200 boards, if
+ CONFIG_AT91RM9200 is defined and nor preloader is used.
+
+ Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
+
+commit 25ea652e907516a283b38237e83712a918f125d7
+Author: Piotr Ziecik <kosmo@semihalf.com>
+Date: Mon Nov 17 15:58:00 2008 +0100
+
+ UBI: Add proof-of-concept CFI flash support
+
+ With this patch UBI can be used on CFI flash chips.
+
+ Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e6a7edbc1778d27431ac663b40a71dafa5d20578
+Author: Piotr Ziecik <kosmo@semihalf.com>
+Date: Mon Nov 17 15:57:59 2008 +0100
+
+ mtd: Remove a printf() from add_mtd_device().
+
+ Remove a printf() from add_mtd_device(), which produces spurious output.
+
+ Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 91809ed51d8327a8dbbf29aa98a091154c282171
+Author: Piotr Ziecik <kosmo@semihalf.com>
+Date: Mon Nov 17 15:57:58 2008 +0100
+
+ cfi-mtd: Add cfi-mtd driver.
+
+ Add cfi-mtd driver, which exports CFI flash to MTD layer.
+ This allows CFI flash devices to be used from MTD layer.
+
+ Building of the new driver is controlled by CONFIG_FLASH_CFI_MTD
+ option. Initialization is done by calling cfi_mtd_init() from
+ flash_init().
+
+ Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6ea808efdf9aa5d9067fbfac32acde8539129ed2
+Author: Piotr Ziecik <kosmo@semihalf.com>
+Date: Mon Nov 17 15:49:32 2008 +0100
+
+ cfi_flash: Add interface for flash verbosity control
+
+ Add interface for flash verbosity control. It allows
+ to disable output from low-level flash API. It is useful
+ when calling these low-level functions from context other
+ than flash commands (for example the MTD/CFI interface
+ implmentation).
+
+ Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ebc9784ce6528385bb8d2558e783622d4bbf20f8
+Author: Piotr Ziecik <kosmo@semihalf.com>
+Date: Thu Nov 20 15:17:38 2008 +0100
+
+ cfi_flash: Export flash_sector_size() function.
+
+ Export flash_sector_size() function from drivers/mtd/cfi_flash.c,
+ so that it can be used in the upcoming cfi-mtd driver.
+
+ Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 45aa5a7f4d5bcb79927ddfc896c1d7c4326e235d
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 17 14:45:22 2008 +0100
+
+ cfi_flash: Make all flash access functions weak
+
+ This patch defines all flash access functions as weak so that
+ they can be overridden by board specific versions.
+
+ This will be used by the upcoming VCTH board support where the NOR
+ FLASH unfortunately can't be accessed memory-mapped. Special
+ accessor functions are needed here.
+
+ To enable this weak functions you need to define
+ CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS in your board config header.
+ Otherwise the "old" default functions will be used resulting
+ in smaller code.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit a5c4067017631d903e1afa6ad615f0ce19fea517
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 24 08:31:16 2008 +0100
+
+ UBI: Change parsing of size in commands to default to hex
+
+ Currently the size parameters of the UBI commands (e.g. "ubi write") are
+ decoded as decimal instead of hex as default. This patch now interprets
+ all these values consistantly as hex, as all other standard U-Boot commands
+ do.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit de01c76c3ccc4e6c5989228eed58e955a3a1a968
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Nov 21 13:06:06 2008 +0100
+
+ ppc4xx: ML2 shouldn't include the 4xx EMAC driver
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1a6a00dcc5bdfc6e9b4b00f39c1f583a7f96fc7f
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Fri Nov 14 16:19:19 2008 +0300
+
+ ppc4xx: katmai: Change default config
+
+ This patch enables support for EXT2, and increases the
+ CONFIG_SYS_BOOTMAPSZ size for the default configuration
+ of the katmai boards to use them as the RAID-reference
+ AMCC setups.
+
+ EXT2 enabling allows one to boot kernels from the EXT2
+ formatted Compact Flash cards.
+
+ CONFIG_SYS_BOOTMAPSZ increasing allows one to boot the
+ Linux kernels, which use PAGE_SIZE of 256KB. Otherwise,
+ the memory area with DTB file (which is placed at the
+ end of the bootmap area) will turn out to be overlapped
+ with the BSS segment of the 256KB kernel, and zeroed
+ in early_init() of Linux.
+
+ Actually, increasing of the bootmap size could be done
+ via setting of the bootm_size U-Boot variable, but it looks
+ like the current U-Boot implementation have some bootm_size-
+ related functionality lost. In many places through the U-Boot
+ code the CONFIG_SYS_BOOTMAPSZ definition is used directly
+ (instead of trying to read the corresponding value from the
+ environment). The same is truth for the boot_jump_linux()
+ function in lib_ppc/bootm.c, where U-Boot transfers control
+ to Linux passing the CONFIG_SYS_BOOTMAPSZ (not bootm_size)
+ value to the booting kernel.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ddf45cc758d394591fb9bcdcbe96530f733f2bce
+Author: Dave Mitchell <dmitch71@gmail.com>
+Date: Thu Nov 20 14:09:50 2008 -0600
+
+ ppc4xx: Changed 460EX/GT OCM TLB and internal SRAM initialization
+
+ Expanded OCM TLB to allow access to 64K OCM as well as 256K of
+ internal SRAM.
+
+ Adjusted internal SRAM initialization to match updated user
+ manual recommendation.
+
+ OCM & ISRAM are now mapped as follows:
+ physical virtual size
+ ISRAM 0x4_0000_0000 0xE300_0000 256k
+ OCM 0x4_0004_0000 0xE304_0000 64k
+
+ A single TLB was used for this mapping.
+
+ Signed-off-by: Dave Mitchell <dmitch71@gmail.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b14ca4b61a681f75f3125676e09d7ce6af66e927
+Author: Dave Mitchell <dmitch71@gmail.com>
+Date: Thu Nov 20 14:00:49 2008 -0600
+
+ ppc4xx: Added ppc4xx-isram.h for internal SRAM and L2 cache DCRs
+
+ Added include/asm-ppc/ppc4xx-isram.h and moved internal SRAM and
+ L2 cache DCRs from ppc440.h to this new header.
+
+ Also converted these DCR defines from lowercase to uppercase and
+ modified referencing modules to use them.
+
+ Signed-off-by: Dave Mitchell <dmitch71@gmail.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 711e2b2af820d21d9931d4cf8057d3894600fd54
+Author: Steven A. Falco <sfalco@harris.com>
+Date: Thu Nov 20 14:37:57 2008 -0500
+
+ ppc4xx: Delete unused definitions for SDR0_DDRCFG from ppc4xx.h
+
+ The definitions of bits in SDR_CFG are incorrect, and not used within
+ U-Boot. Therefore, they can be removed.
+
+ The naming of the sdr_ddrdl/sdr_cfg registers do not follow conventions,
+ and are unused, so they can be removed too.
+
+ A definition for SDR0_DDRCFG is added.
+
+ Signed-off-by: Steven A. Falco <sfalco@harris.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e23c7c95a96eb0f068efe5c532215a10a1512a95
+Author: Dirk Behme <dirk.behme@gmail.com>
+Date: Mon Nov 10 20:15:25 2008 +0100
+
+ ARM: OMAP: Convert IO macros
+
+ Convert IO macros to readx/writex.
+
+ Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+
+commit 263b749e2e25473a48776d317bd2a7e2ddcdd212
+Author: Ilko Iliev <iliev@ronetix.at>
+Date: Sun Nov 9 15:53:14 2008 +0100
+
+ lib_arm: do_bootm_linux() - correct a small mistake
+
+ This patch corrects a small bug in the "if" condition:
+ the parameter "flag" is 0 and the "if" condition is always true.
+ The result is - the boom command doesn't start the kernel.
+ Affected targets: all arm based.
+
+ Signed-off-by: Ilko Iliev <iliev@ronetix.at>
+
+commit 3e0cda071a67cb5709e3fa4faf6b31a731859acc
+Author: Stelian Pop <stelian@popies.net>
+Date: Sun Nov 9 00:14:46 2008 +0100
+
+ AT91: Enable PLLB for USB
+
+ At least some (old ?) versions of the AT91Bootstrap do not set up the
+ PLLB correctly to 48 MHz in order to make USB host function correctly.
+
+ This patch sets up the PLLB to the same values Linux uses, and makes USB
+ work ok on the following CPUs:
+ - AT91CAP9
+ - AT91SAM9260
+ - AT91SAM9263
+
+ This patch also defines CONFIG_USB_STORAGE and CONFIG_CMD_FAT for all
+ the relevant AT91CAP9/AT91SAM9 atmel boards.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ad229a44e162af0f65e57e4e3dc133d5f0364ecb
+Author: Stelian Pop <stelian@popies.net>
+Date: Fri Nov 7 13:55:14 2008 +0100
+
+ AT91: Use AT91_CPU_CLOCK in displays
+
+ Introduce AT91_CPU_CLOCK and use it for displaying the CPU
+ speed in the LCD driver.
+
+ Also make AT91_MAIN_CLOCK and AT91_MASTER_CLOCK reflect the
+ corresponding board clocks.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit fed36ac5ae613773b6cd90e61e292c45440e10c8
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Nov 20 09:57:47 2008 +0100
+
+ powerpc: 83xx: add support for the kmeter1 board
+
+ This patch adds support for the kmeter1 board from Keymile,
+ based on a Freescale MPC8360 CPU.
+
+ - serial console on UART 1
+ - 256 MB DDR2 RAM
+ - 64 MB NOR Flash
+ - Ethernet RMII Mode over UCC4
+ - PHY SMSC LAN8700
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 25fb4eaaeab3f8866020818f4729d990dcc91cf0
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Nov 20 11:46:20 2008 +0100
+
+ ppc4xx: Clear all potentially pending exceptions in MCSR
+
+ This is needed on Canyonlands which still has an exception pending
+ while running relocate_code(). This leads to a failure after trap_init()
+ is moved to the top of board_init_r().
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit facdad5f2602e899a01746916beddbf9e856b5ee
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Nov 19 10:10:30 2008 +0100
+
+ powerpc: 83xx: add missing TIMING_CFG1_CASLAT_* defines
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 2f2a5c3714d17f4ead18b713128b7226e0e822f4
+Author: Howard Gregory <Greg.Howard@freescale.com>
+Date: Tue Nov 4 14:55:33 2008 +0800
+
+ mpc83xx: Improve the performance of DDR memory
+
+ modify the CAS timings. my understanding is that these
+ settings decrease various wait times in the DDR interface.
+ Because these wait times are in clock cycles, and the DDR
+ clock on the 8315 RDB runs slower than on some other 83xx
+ platforms, we can dial down these values without a problem,
+ thereby decreasing the latency of memory a little.
+
+ Signed-off-by: Howard Gregory <Greg.Howard@freescale.com>
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8000b086b33a5a81f3f390f37e178db7956dc08b
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Fri Oct 24 14:55:33 2008 +0200
+
+ ARM: Add Apollon UBI support
+
+ To enable UBI on Apollon you need to uncomment the CONFIG_SYS_USE_UBI
+ macro.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 694a0b3f1c0accd0de94b89555155d69f8022824
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Wed Nov 19 11:47:05 2008 +0100
+
+ UBI: Add UBI command support
+
+ This patch adds these UBI commands:
+
+ ubi part [nand|onenand] [part] - Show or set current partition
+ ubi info [l[ayout]] -Display volume and UBI layout information
+ ubi create[vol] volume [size] [type] - Create volume name with size
+ ubi write[vol] address volume size - Write volume from address with size
+ ubi read[vol] address volume [size] - Read volume to address with size
+ ubi remove[vol] volume - Remove volume
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 58be3a1056d88c6d05f3e914389282807e69923a
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Wed Nov 19 16:38:24 2008 +0100
+
+ UBI: Add basic UBI support to U-Boot (Part 8/8)
+
+ This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+ It's based on the Linux UBI version and basically has a "OS"
+ translation wrapper that defines most Linux specific calls
+ (spin_lock() etc.) into no-ops. Some source code parts have been
+ uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+ this version with the Linux version and simplifies future UBI
+ ports/bug-fixes from the Linux version.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 47ae6693f54f80455ae32c2e0d995e0e4bdc15b9
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Wed Nov 19 16:36:36 2008 +0100
+
+ UBI: Add basic UBI support to U-Boot (Part 7/8)
+
+ This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+ It's based on the Linux UBI version and basically has a "OS"
+ translation wrapper that defines most Linux specific calls
+ (spin_lock() etc.) into no-ops. Some source code parts have been
+ uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+ this version with the Linux version and simplifies future UBI
+ ports/bug-fixes from the Linux version.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7e6ee7ad27de5216db1baef76f38c3429c8f4a2a
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Wed Nov 19 16:32:36 2008 +0100
+
+ UBI: Add basic UBI support to U-Boot (Part 6/8)
+
+ This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+ It's based on the Linux UBI version and basically has a "OS"
+ translation wrapper that defines most Linux specific calls
+ (spin_lock() etc.) into no-ops. Some source code parts have been
+ uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+ this version with the Linux version and simplifies future UBI
+ ports/bug-fixes from the Linux version.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c91a719daa331b5856109313371e4ece5ec06d96
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Wed Nov 19 16:28:06 2008 +0100
+
+ UBI: Add basic UBI support to U-Boot (Part 5/8)
+
+ This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+ It's based on the Linux UBI version and basically has a "OS"
+ translation wrapper that defines most Linux specific calls
+ (spin_lock() etc.) into no-ops. Some source code parts have been
+ uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+ this version with the Linux version and simplifies future UBI
+ ports/bug-fixes from the Linux version.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f412fefa079c6aa9a9763f6869bf787ea6bf6e1b
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Wed Nov 19 16:27:23 2008 +0100
+
+ UBI: Add basic UBI support to U-Boot (Part 4/8)
+
+ This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+ It's based on the Linux UBI version and basically has a "OS"
+ translation wrapper that defines most Linux specific calls
+ (spin_lock() etc.) into no-ops. Some source code parts have been
+ uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+ this version with the Linux version and simplifies future UBI
+ ports/bug-fixes from the Linux version.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2d262c4853cb5b6ddce1a28a9641f2de3688d7ea
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Wed Nov 19 16:26:54 2008 +0100
+
+ UBI: Add basic UBI support to U-Boot (Part 3/8)
+
+ This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+ It's based on the Linux UBI version and basically has a "OS"
+ translation wrapper that defines most Linux specific calls
+ (spin_lock() etc.) into no-ops. Some source code parts have been
+ uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+ this version with the Linux version and simplifies future UBI
+ ports/bug-fixes from the Linux version.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 961df83361aff9a14f226214224eb8a06e05ba24
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Wed Nov 19 16:25:44 2008 +0100
+
+ UBI: Add basic UBI support to U-Boot (Part 2/8)
+
+ This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+ It's based on the Linux UBI version and basically has a "OS"
+ translation wrapper that defines most Linux specific calls
+ (spin_lock() etc.) into no-ops. Some source code parts have been
+ uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+ this version with the Linux version and simplifies future UBI
+ ports/bug-fixes from the Linux version.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f399d4a281713d5ef2d764f05d545fe61e3bd569
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Wed Nov 19 16:23:06 2008 +0100
+
+ UBI: Add basic UBI support to U-Boot (Part 1/8)
+
+ This patch adds basic UBI (Unsorted Block Image) support to U-Boot.
+ It's based on the Linux UBI version and basically has a "OS"
+ translation wrapper that defines most Linux specific calls
+ (spin_lock() etc.) into no-ops. Some source code parts have been
+ uncommented by "#ifdef UBI_LINUX". This makes it easier to compare
+ this version with the Linux version and simplifies future UBI
+ ports/bug-fixes from the Linux version.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e29c22f5abe6e0f4baa6251efed6074cdfc3db79
+Author: Kyungmin Park <kyungmin.park@samsung.com>
+Date: Wed Nov 19 16:20:36 2008 +0100
+
+ MTD: Add MTD paritioning infrastructure
+
+ This MTD part infrastructure will be used by the upcoming
+ UBI support.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9b827cf1720acda2473afa516956eab6f7cca9a1
+Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
+Date: Thu Oct 16 22:54:03 2008 +0530
+
+ Align end of bss by 4 bytes
+
+ Most of the bss initialization loop increments 4 bytes
+ at a time. And the loop end is checked for an 'equal'
+ condition. Make the bss end address aligned by 4, so
+ that the loop will end as expected.
+
+ Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3f510db522d160179dff3ddcce9b18f6241c2c24
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Mon Nov 10 19:45:35 2008 -0600
+
+ mpc8641: fix address-cells default in old .dts detection
+
+ address-cells defaults to 2, not 1; so in the unlikely
+ event that it isn't specified, this patch is required
+ for correct operation.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit d025aa4b20a0618a2bada0132a9a0a4afb717f1a
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Fri Oct 31 17:14:39 2008 -0500
+
+ lib_ppc: Move trap_init to occur earlier
+
+ Doing trap_init immediately once we're running from RAM
+ means we're no longer dependent on the physical location of
+ the flash on non-BookE platforms. Before trap_init, those
+ platforms switch to real mode and go to 0xfff00100 on exception.
+ After the switch, they go to 0x00000100 This makes it easier to
+ move the flash location.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit d52082b12c6e545705a19433a2f4142526536189
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Fri Nov 7 13:46:19 2008 -0600
+
+ mpc8641: Try to detect old .dts files
+
+ Since we've changed the memory map of the board, be nice and
+ add some checking to try to catch out-of-date .dts files. We do
+ this by checking the CCSRBAR location in the .dts and comparing
+ it to the CCSRBAR location in u-boot. If they don't match, a
+ warning msg is printed. This isn't foolproof, but it's simple and
+ will catch most of the cases where an out-of-date .dts is present,
+ including all of the cases where a new u-boot is used with an old
+ standard MPC8641 .dts file as supplied with Linux.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 8db0400a27839f91c047dcb83f4a0f09e054a180
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Thu Nov 6 13:04:09 2008 -0600
+
+ toplevel Makefile: Add MPC8641HPCN_36BIT target
+
+ This will enable CONFIG_PHYS_36BIT for MPC8641HPCN.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 3111d32c494e8251b90917447796a7206b757e1e
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Thu Nov 6 17:37:35 2008 -0600
+
+ mpc8641: Support 36-bit physical addressing
+
+ This patch creates a memory map with all the devices
+ in 36-bit physical space, in addition to the 32-bit map.
+ The CCSR relocation is moved (again, sorry) to
+ allow for the physical address to be 36 bits - this
+ requires translation to be enabled. With 36-bit physical
+ addressing enabled, we are no longer running with VA=PA
+ translations. This means we have to distinguish between
+ the two in the config file. The existing region name is
+ used to indicate the virtual address, and a _PHYS variety
+ is created to represent the physical address.
+
+ Large physical addressing is not enabled by default.
+ Set CONFIG_PHYS_64BIT in the config file to turn this on.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit c759a01a0022de9378a3a761f49786f87684c916
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Thu Nov 6 17:36:04 2008 -0600
+
+ mpc8641: Change 32-bit memory map
+
+ The memory map on the 8641hpcn is modified to look more like
+ the 85xx boards; this is a step towards a more standardized
+ layout going forward. As part of this change, we now relocate
+ the flash.
+
+ The regions for some of the mappings were far larger than they
+ needed to be. I have reduced the mappings to match the
+ actual sizes supported by the hardware.
+
+ In addition I have removed the comments at the head
+ of the BAT blocks in the config file, rather than updating
+ them. These get horribly out of date, and it's a simple
+ matter to look at the defines to see what they are set to
+ since everything is right here in the same file.
+
+ Documentation has been changed to reflect the new map, as this
+ change is user visible, and affects the OS which runs post-uboot.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit bf9a8c34309ed9276258295db9e9212aabb2531a
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Nov 5 14:55:35 2008 -0600
+
+ mpc86xx: Change early FLASH mapping to 1M at CONFIG_MONITOR_BASE_EARLY
+
+ We define CONFIG_MONITOR_BASE_EARLY to define the initial location
+ of the bootpage in flash. Use this to create an early mapping
+ definition for the FLASH, and change the early_bats code to use this.
+
+ This change facilitates the relocation of the flash since the early
+ mappings are no longer tied to the final location of the flash.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit c1e1cf69547b138173f87a7f81c42a5d8dbfde3d
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Nov 5 14:55:34 2008 -0600
+
+ mpc86xx: Use SRR0/1/rfi to enable address translation, not blr
+
+ Using a mtmsr/blr means that you have to be executing at the
+ same virtual address once you enable translation. This is
+ unnecessarily restrictive, and is not really how this is
+ usually done. Change it to use the more common mtspr SRR0/SRR1
+ and rfi method.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 6bf98b1362f0cb237620355ed3e6762fff82388d
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Nov 5 14:55:33 2008 -0600
+
+ mpc8641: make DIAG_ADDR == FLASH_BASE
+
+ Currently, that's what it is, but it's hardcoded.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 170deacb1ddc39164bdb68f3963e0c0456a5369b
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Nov 5 14:55:32 2008 -0600
+
+ mpc8641: Drop imaginary second flash bank, map 8MB
+
+ There's a lot of setup and foo for the second flash
+ bank. The problem is, this board doesn't actually have one.
+ Clean this up. Also, the flash is 8M in size. Get rid
+ of the confusing aliased overmapping, and just map 8M.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 0f2d66027bfc60dc7eea2f096af8891988c5abe4
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Nov 5 14:55:31 2008 -0600
+
+ mpc8641: only define CONFIG_ENV_SIZE once
+
+ It's currently defined twice inside in an if/else block, but
+ both halves set the same value. Move the define outside
+ the if.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 24bfb48c35fed6ad1f047e3e4a27df302482cd93
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Nov 5 14:55:30 2008 -0600
+
+ mpc86xx: Move setup_bats into cpu_init_f
+
+ In order to later allow for a physical relocation of the
+ flash, setup_bats, which sets up the final BAT mapping
+ for the board, needs to happen *after* init_laws().
+ Otherwise, there will be no window programmed for the flash
+ at the new physical location at the point when we change
+ the mmu translation.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 05df3e5a638be8c5b0899eae1766bbe8e4b92c17
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Nov 5 14:55:29 2008 -0600
+
+ mpc8641: Remove extra "0" from BR2 define
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit edf3fe7d39a1ee07353128af5221422ce9ccfad6
+Author: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+Date: Thu Oct 23 09:08:18 2008 -0400
+
+ drivers/qe/uec_phy.c: Added PHY-less (fixed PHY) driver.
+
+ Copied over the fixed PHY driver as used in pp4xx/4xx_enet.c.
+ This adds support for PHY-less MAC connections to the UEC.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 54bdcc9fb6670afde9c26dcf364f582879bf21d6
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Oct 23 16:27:24 2008 +0000
+
+ ColdFire: Add mii driver in drivers/net
+
+ All CF platforms' mii.c are consolidated into one
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 25a859066b3af1070eb69f12022113c0a91bd813
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Mon Oct 27 23:53:17 2008 -0700
+
+ Moved initialization of PPC4xx EMAC to cpu_eth_init()
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 4d03a4e20e58552cb96d61a0e8b56cdb6cc60126
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Nov 9 21:29:23 2008 -0800
+
+ Moved PPC4xx EMAC driver to drivers/net
+
+ Also changed path in all linker scripts that reference this driver
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 96e21f86e8266ed40759e5495ee461265d7f6d28
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Mon Oct 27 23:50:15 2008 -0700
+
+ Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
+
+ All in-tree IBM/AMCC PPC4xx boards using the EMAC get this new CONFIG
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 9eb79bd8856bcab896ed5e1f1bca159807a124dd
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Thu Oct 23 22:02:49 2008 -0700
+
+ Moved initialization of MPC8XX SCC to cpu_eth_init()
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit a9bec96d6359ac9f90a852962bf3040cad9e0256
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Wed Oct 22 23:47:51 2008 -0700
+
+ Moved initialization of MPC8220 FEC to cpu_eth_init()
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 0e8454e990385a58f708c2fc26d31ac041c7a6c5
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Wed Oct 22 23:32:48 2008 -0700
+
+ Moved initialization of QE Ethernet controller to cpu_eth_init()
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3456a148276d5494b53ee40242efb6462d163504
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Wed Oct 22 23:20:29 2008 -0700
+
+ Moved initialization of FCC Ethernet controller to cpu_eth_init
+
+ Affected boards:
+ Several MPC8xx boards
+ Several MPC8260/MPC8272 boards
+ Several MPC85xx boards
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 62e15b497f5c6334c059512678c8db7940ae4c61
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Thu Oct 30 22:15:35 2008 -0700
+
+ Fix typo in cpu/mpc85xx/cpu.c
+
+ CONFIG_MPC85xx_FEC -> CONFIG_MPC85XX_FEC
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 5dfb3ee3f54e2382a08d72906f0e79ecf944f6e3
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sun Oct 19 12:08:50 2008 +0900
+
+ net: Move initialization of Au1x00 SoC ethernet MAC to cpu_eth_init
+
+ This patch will move au1x00_eth_initialize from net/eth.c to cpu_eth_init
+ as a part of ongoing eth_initialize cleanup work. The function ret value
+ is also fixed as it should be negative on fail.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit cc94074ecac1885d18ddb683eb934b3c0268aa5b
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Fri Sep 5 01:55:22 2008 -0400
+
+ Moved initialization of IXP4XX_NPE Ethernet controller to cpu_eth_init()
+
+ Also, removed the driver initialization from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit f2a7806fc23e82d30c8548911369e0c530607354
+Author: Clive Stubbings <uboot@xentech.co.uk>
+Date: Mon Oct 27 15:05:00 2008 +0000
+
+ xilinx_emaclite buffer overrun
+
+ Patch to fix buffer allocation size and alignment. Buffer needs to be u32 aligned and
+ PKTSIZE_ALIGN bytes long.
+
+ Acked-by: Michal Simek <monstr@monstr.eu>
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 0115b1953718a2969f6469d3d5da51ba11e12d42
+Author: richardretanubun <richardretanubun@ruggedcom.com>
+Date: Fri Sep 26 08:59:12 2008 -0400
+
+ NET: QE: UEC: Make uec_miiphy_read() and uec_miiphy_write() use the devname arg.
+
+ The current uec_miiphy_read and uec_miiphy_write hardcode access devlist[0]
+ This patch makes these function use the devname argument that is passed in to
+ allow access to the phy registers of other devices in devlist[].
+
+ Signed-of-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 44dcb7332033db8de2810f2fffcae3084f15c8d4
+Author: richardretanubun <richardretanubun@ruggedcom.com>
+Date: Mon Oct 6 15:31:43 2008 -0400
+
+ Adds two more ethernet interface to 83xx
+
+ Fixed compiler warning "declared but unused" eth5_uec_info and eth6_uec_info.
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d8003fa03733901b73d6c4667b4d80fc8eb1ddd3
+Author: Stelian Pop <stelian@popies.net>
+Date: Fri Nov 7 13:54:31 2008 +0100
+
+ AT91: Replace AT91_BASE_EMAC by the board specific values.
+
+ AT91_BASE_EMAC is never used outside the board specific files,
+ so replace its usage by the board specific AT91xxx_BASE_EMAC.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c91e17affa175ce06afa89b04752301eb4a61666
+Author: Stelian Pop <stelian@popies.net>
+Date: Fri Nov 7 12:09:21 2008 +0100
+
+ AT91: Replace (undefined) AT91_ID_US* by the board specific values.
+
+ AT91_ID_US0 / AT91_ID_US1 / AT91_ID_US2 were used but never defined.
+ Since they are never used outside the board specific files, they can
+ be replaced by the board specific AT91xxx_ID_US0 / AT91xxx_ID_US1 /
+ AT91xxx_ID_US2.
+
+ Bug spotted by Jesus Alvarez <jalvarez@micromint.com>.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 28962f5a2de81bc0eed1c0b08c6bfaa1cc134ea2
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Nov 1 10:47:59 2008 +0100
+
+ Makefile/at91sam9: move some at91sam9 to the correct subsection for arm926ejs
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1079432e04ccf71aa3684181186182cd63512f19
+Author: Sergey Lapin <slapin@ossfans.org>
+Date: Fri Oct 31 12:28:43 2008 +0100
+
+ Custom AFEB9260 board support
+
+ This patch provides support for AFEB9260 board, a product of
+ OpenSource hardware and software. Some commertial projects
+ are made with this design. A board is basically AT91SAM9260-EK
+ with some modifications and different peripherals and different
+ parts used. Main purpose of this project is to gain experience in
+ hardware design.
+ More info: http://groups.google.com/group/arm9fpga-evolution-board
+ (In Russian only, sorry).
+ Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb
+
+ Signed-off-by: Sergey Lapin <slapin@ossfans.org>
+
+commit 26eecd24f97130e56e9c2c2af0e714e05bce6e00
+Author: Tomohiro Masubuchi <tomohiro_masubuchiattripeaks.co.jp>
+Date: Tue Oct 21 13:17:16 2008 +0900
+
+ Change to use "do_div" macro
+
+ Signed-off-by: Tomohiro Masubuchi <tomohiro_masubuchi@tripeaks.co.jp>
+
+commit e352495318d8056a00faa21b633b3e4374bfbf52
+Author: Roman Mashak <romez777@gmail.com>
+Date: Wed Oct 22 16:00:26 2008 -0400
+
+ ARM926EJ-S: relocate OMAP specific 'cpuinfo.c' into OMAP directory
+
+ OMAP identification is implemented in 'cpuinfo.c' and located in ARM926EJ-S directory.
+ It makes sense to place this file in OMAP specific subdirectory, i.e. cpu/arm926ejs/omap
+
+ Signed-off-by: Roman Mashak <romez777@gmail.com>
+
+commit 248b2c367210c06dbd5fbdecf27e97fbe9d05fdb
+Author: Roman Mashak <romez777@gmail.com>
+Date: Tue Oct 21 03:01:41 2008 -0700
+
+ ARM/Versatile port: Removed unused functions
+
+ Removal of never used functions.
+
+ Signed-off-by: Roman Mashak <romez777@gmail.com>
+
+commit 1266df887781c779deaf6d05eea2ef90a470cb34
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Mon Nov 3 15:44:01 2008 -0600
+
+ powerpc: change 86xx SMP boot method
+
+ We put the bootpg for the secondary cpus into memory and use
+ BPTR to get to it. This is a step towards converting to the
+ ePAPR boot methodology. Also, the code is written to
+ deal properly with more than 4GB of RAM.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit b5431560682d8f318fbc49db87cfe13ab41d2ee4
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Fri Oct 31 17:13:49 2008 -0500
+
+ 8641HPCN: Config file cleanup
+
+ There are several items in the config file that were hardcoded
+ but that should really be based on other config options, since
+ the regions are contiguous and depend on being so. This cleans
+ that up a bit. Also, add BR_PHYS_ADDR() macro to convert
+ addresses into the proper format for BR registers.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 4c77de3f144ca088c3867bd6240718c10f5a9d69
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Fri Oct 31 17:13:32 2008 -0500
+
+ 86xx: Make dram_size a phys_size_t
+
+ It's currently a long and should be phys_size_t.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 104992fc541302a6bac74448e01e7fdad20abca0
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Sun Nov 2 18:19:32 2008 -0600
+
+ powerpc 86xx: Handle CCSR relocation earlier
+
+ Currently, the CCSR gets relocated while translation is
+ enabled, meaning we need 2 BAT translations to get to both the
+ old location and the new location. Also, the DEFAULT
+ CCSR location has a dependency on the BAT that maps the
+ FLASH region. Moving the relocation removes this unnecessary
+ dependency. This makes it easier and more intutive to
+ modify the board's memory map.
+
+ Swap BATs 3 and 4 on 8610 so that all 86xx boards use the same
+ BAT for CCSR space.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit af5d100e8d5cd49d69d52d20f1181eb06ddb4ddf
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Fri Oct 31 17:14:14 2008 -0500
+
+ mpc8641: Make PCI and RIO mutually exclusive, fix non-PCI build
+
+ You can't actually have both, and with some coming changes to
+ change the memory map for the board and support 36-bit physical,
+ we need the extra BAT that is being consumed by having both.
+
+ I also make non-PCI configs build cleanly, for the sake of sanity.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 98693b85d42ff438375dc6d6dcadc70eb7b050bb
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Fri Oct 31 17:14:00 2008 -0500
+
+ mpc8641: Stop supporting non-PCI_PNP configs
+
+ We don't actually ever do this, remove the code so we
+ can stop maintaining it.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit e4f69d1bd21a12049744989d2dd6b5199c9b8f23
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Fri Oct 24 12:59:12 2008 +0000
+
+ ColdFire: Fix M5329EVB and M5373EVB nand issue
+
+ Fix compilation issue caused by a few mismatches.
+ Provide proper nand chip select enable/disable in
+ nand_hwcontrol() rather than in board_nand_init()
+ just enable once. Remove redundant local nand driver
+ functions - nand_read_byte(), nand_write_byte() and
+ nand_dev_ready() to use common nand driver.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 1b2708442224a551a0b865b52710306333888932
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Oct 22 11:55:30 2008 +0000
+
+ ColdFire: Fix compilation error
+
+ The error was caused by the change for strmhz() in cpu.c.
+ A few of them were one extra close parenthesis.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 536e7dac16769954915a484e682a2efb28699133
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Oct 22 11:38:21 2008 +0000
+
+ ColdFire: Add MCF5301x CPU and M53017EVB support
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit a21d0c2cc9add8894d971ab791f4032f077db817
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Oct 21 15:37:02 2008 +0000
+
+ ColdFire: Add SBF support for M52277EVB
+
+ Add serial boot support
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit b202816c61042c183fe67d097a5893b0f2dafba0
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Oct 21 14:19:26 2008 +0000
+
+ ColdFire: Use CFI driver for M5272C3
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit f3962d3f574e5a1cffacd4e9bc48713060a2a314
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Oct 21 13:47:54 2008 +0000
+
+ ColdFire: Relocate FEC's GPIO and mii functions protocols
+
+ Place FEC pin assignments in cpu_init.c from platform's
+ mii.c
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 6e80f5aa09f8d41bac50b38dc7488ecd22107802
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Oct 21 12:15:44 2008 +0000
+
+ ColdFire: Remove platforms mii.c file
+
+ Will use mcfmii.c driver in drivers/net rather than
+ keep creating new mii.c for each future platform.
+ Remove EB+MCF-EV123, cobra5272, idmr, M5235EVB,
+ M5271EVB, M5272C3, M5275EVB, M5282EVB, M5329EVB,
+ M5373EVB, M54451EVB, M54455EVB, M547xEVB, and M548xEVB's
+ mii.c
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 012522fef3b382469125beb46a315ab4dee02fb0
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Oct 21 10:03:07 2008 +0000
+
+ ColdFire: Modules header files cleanup
+
+ Consolidate ATA, ePORT, QSPI, FlexCan, PWM, RNG,
+ MDHA, SKHA, INTC, and FlexBus structures and
+ definitions in immap_5xxx.h to more unify modules
+ header files. Append DSPI support for m547x_8x.
+ SSI cleanup. Remove USB Host structure from immap_539.h.
+ Apply changes to use FlexBus structures in mcf52x2's
+ cpu_init.c and platform configuration files.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit ac2331aee99ad36be0fcfed8c49922e3c61b576d
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Oct 21 08:52:36 2008 +0000
+
+ ColdFire: Remove linker file
+
+ Each different build for M54455EVB and M5235EVB will
+ create a u-boot.lds linker file. It is redundant to
+ keep the u-boot.lds
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 0829323073c505556ed5f5073f91adb504584d45
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Oct 31 11:26:44 2008 -0500
+
+ ppc: Fix compile warnings when !CONFIG_OF_LIBFDT
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit a80b21d5127583171d6e9bc7f722947641898012
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Oct 31 12:12:12 2008 +0100
+
+ common/Makefile: create others group for non core, environment and command files
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 60c68d9c1c6d18ce02c862a05718fd94f97c13d0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Oct 31 01:13:37 2008 +0100
+
+ TQM8260: use CFI flash driver instead of custom driver.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 20d04774f4ef3f6e38974636e0e36ae0f0b5501f
+Author: Andy Fleming <afleming@freescale.com>
+Date: Thu Oct 30 17:35:30 2008 -0500
+
+ Consolidate MAX/MIN definitions
+
+ There were several, now there is one (two if you count the lower-case
+ versions).
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 298e476c66fd88d0bc4f0371118652d2b5de4e8a
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Oct 30 09:23:09 2008 +0100
+
+ mgsuvd: remove unused defines in config file.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 3cbd823116ea8b7c654e275a8c2fca87cd1f5dc5
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Nov 2 16:14:22 2008 +0100
+
+ Coding Style cleanup, update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a47f957ab523019992fdef857af01bd71c58a4da
+Author: Alessandro Rubini <rubini-list@gnudd.com>
+Date: Fri Oct 31 22:33:21 2008 +0100
+
+ NAND: Allow NAND and OneNAND to coexist
+
+ This removes in nand.h code that is verbatim duplicated from bbm.h,
+ including directly bbm.h in nand.h. The previous state of affairs
+ prevented compiling code for a board hosting both NAND and OneNAND chips.
+
+ Reported-by: Scott Wood <scottwood@freescale.com>
+ Signed-off-by: Alessandro Rubini <rubini@unipv.it>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 2f77c7f45b9a37ef265a8dbe3c18efa706fed214
+Author: Scott Wood <scottwood@freescale.com>
+Date: Fri Oct 31 13:51:12 2008 -0500
+
+ JFFS2: Eliminate compiler error when both NAND and OneNAND are enabled.
+
+ Reported-by: Alessandro Rubini <rubini-list@gnudd.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit c57fc28947e248fb03c49a28b467686299895055
+Author: Jason Jin <Jason.Jin@freescale.com>
+Date: Fri Oct 31 05:07:04 2008 -0500
+
+ NAND: Add NAND support for MPC8536DS board
+
+ This patch defines 1M TLB&LAW size for NAND on MPC8536DS, assigns 0xffa00000
+ for CONFIG_SYS_NAND_BASE and adds other NAND supports in config file.
+ It also moves environment(CONFIG_ENV_ADDR) outside of u-boot image.
+
+ Singed-off-by: Jason Jin <Jason.Jin@freescale.com>
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6fc110bd8a8d642b8f7b0653bd9a08a0b7c3d50b
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri Oct 31 05:06:14 2008 -0500
+
+ NAND: Fix CONFIG_ENV_ADDR for MPC8572DS
+
+ CONFIG_ENV_ADDR should be (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE).
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 51b572a801be57790fe26adaa530210e7fba59cc
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Fri Oct 24 10:49:48 2008 +0900
+
+ sh: rsk7203: Moved rsk7203 board to board/renesas
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 58453b00b3ebb26aaa901210023f99504a90bb00
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Fri Oct 24 10:48:31 2008 +0900
+
+ sh: MigoR: Moved MigoR board to board/renesas
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c1da2a22817ba85b437afa2f4e715e658b219fd1
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Fri Oct 24 10:39:44 2008 +0900
+
+ sh: r2dplus: Moved r2dplus board to board/renesas
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 78385bf2359d828184d0b3649f7ae6b933420000
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Fri Oct 24 10:36:13 2008 +0900
+
+ sh: sh7763rdp: Moved sh7763rdp board to board/renesas
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c6525d459c350bfc246ea7826456af77e1e314eb
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Fri Oct 24 10:35:19 2008 +0900
+
+ sh: sh7785lcr: Moved sh7785lcr board to board/renesas
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit acd3e30d09a73f876222f0d496c4f52ee9d0771d
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Fri Oct 24 10:34:21 2008 +0900
+
+ sh: r7780mp: Moved r7780mp board to board/renesas
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit f84e6ea275353b8fea772ec7553ff7e4b1f642e0
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Fri Oct 24 10:32:14 2008 +0900
+
+ sh: ap325rxa: Moved ap325rxa board to board/renesas
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 9abda6ba735efb059f63dcb25d78b174bfcad1ad
+Author: Wolfgang Denk <wd@xpert.denx.de>
+Date: Fri Oct 31 01:12:28 2008 +0100
+
+ CFI Driver: Fix "flash not ready" problem
+
+ This patch fixes a problem on systems where the NOR flash is attached
+ to a 64 bit bus. The toggle bit detection in flash_toggle() is based
+ on the assumption that the same flash address is read twice without
+ any other interjacent flash accesses. However, on 32 bit systems the
+ function flash_read64() [as currently implemented] does not perform
+ an atomic 64 bit read - instead, this is broken down into two 32 bit
+ read accesses on addresses "addr" and "addr + 4". So instead of
+ reading a 64 bit value twice from "addr", we see a sequence of 4 32
+ bit reads from "addr", "addr + 4", "addr", and "addr + 4". The
+ consequence is that flash_toggle() fails to work.
+
+ This patch implements a simple, but somewhat ugly solution, as it
+ avoids the use of flash_read64() in this critical place (by breaking
+ it down manually into 32 bit read operations) instead of rewriting
+ flash_read64() such to perform atomic 64 bit reads as one could
+ expect. However, such a rewrite would require the use of floating
+ point load operations, which becomes pretty complex:
+
+ save MSR;
+ set Floating Point Enable bit in MSR;
+ use "lfd" instruction to perform atomic 64 bit read;
+ use "stfd" to store value to temporary variable on stack;
+ load u64 value from temporary variable;
+ restore saved MSR;
+ return u64 value;
+
+ The benefit-cost ratio of such an implementation was considered too
+ bad to actually attempt this, especially as we can expect that such
+ an implementation would not only have a bigger memory footprint but
+ also cause a performance degradation.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cdd4fe63b094d4b767f12ff241d72566b461ee61
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Oct 31 10:48:08 2008 +0100
+
+ ppc4xx: Fix spelling error in MAINTAINERS file
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit be270798900b75ad9c47c7b79c72f70441196c56
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Oct 28 13:37:00 2008 +0100
+
+ ppc4xx: Update PMC440 board support
+
+ This patch brings PMC440 board support up to date:
+
+ - fix GPIO configuration
+ - add misc_init_f()
+ - use better values for usbact variable
+ - fix USB 2.0 phy reset sequence
+ - shrink BAR2 to save PCI address space
+ - add FDT support
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 75183b1a7fc04206d9779d13f16e03853d7e965d
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Oct 28 13:36:59 2008 +0100
+
+ ppc4xx: Fix PMC440 BSP commands
+
+ This patch fixes the PMC440 BSP commands painit and selfreset
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 76b565b69f886d5ae748db65e44f464b0e70d41a
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Oct 28 13:36:58 2008 +0100
+
+ ppc4xx: Update PMC440 board configuration
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ca0c2d42b93116a8e1b8ef8ad4493c7dc9b5f2e4
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Oct 28 13:36:57 2008 +0100
+
+ ppc4xx: Fix esd loadpci command
+
+ This patch fixes esd's loadpci command when not all
+ memory on adapter boards is accessable via PCI.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 492aa9ea13791ca4591b5bde895a425e27ae2d10
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Oct 28 13:36:56 2008 +0100
+
+ ppc4xx: Clean up PMC440 header
+
+ -Codingstyle cleanup
+ -Remove unused GPIO define
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 295133258a44f97a57fb2ec339aecfda11f4db95
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Oct 28 13:36:55 2008 +0100
+
+ ppc4xx: Handle other board variant in PMC440 FPGA code
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cc2dc9b08cf7c09f9f237f8cb9303f11603d4fb0
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Mon Oct 27 12:35:59 2008 +0100
+
+ ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg
+
+ Xilinx ppc440 and ppc405 have many similarities. This patch merge the
+ config files of both infrastuctures
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3befd85633d33c4dcca1f359c3f4848c5ab8e4d2
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Oct 25 06:45:31 2008 +0200
+
+ ppc4xx: Correctly configure the GPIO pin muxing on Arches
+
+ Arches doesn't use PerCS3 but GPIO43, so let's configure the GPIO
+ pin multiplexing correctly
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7c84fe6a06dad9f793ed85b39b1e6c11a7882f5c
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Thu Oct 30 23:22:04 2008 +0100
+
+ Fix to the auto-update feature documentation (CONFIG_UPDATE_TFTP_MSEC_MAX)
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 4bc7deee9095f21e243b724ca3d634251c1d5432
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Wed Oct 29 23:27:45 2008 -0500
+
+ libfdt: Fix bug in fdt_subnode_offset_namelen()
+
+ There's currently an off-by-one bug in fdt_subnode_offset_namelen()
+ which causes it to keep searching after it's finished the subnodes of
+ the given parent, and into the subnodes of siblings of the original
+ node which come after it in the tree.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f242a08871839eac081ba5b599af979f3a148a0d
+Author: Peter Korsgaard <jacmet@sunsite.dk>
+Date: Tue Oct 28 08:26:52 2008 +0100
+
+ fdt_resize(): ensure minimum padding
+
+ fdt_add_mem_rsv() requires space for a struct fdt_reserve_entry
+ (16 bytes), so make sure that fdt_resize at least adds that much
+ padding, no matter what the location or size of the fdt is.
+
+ Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit d685b74c64a38849f1a129b3ab846fbf67dd937e
+Author: Dave Liu <daveliu@freescale.com>
+Date: Thu Oct 23 21:59:35 2008 +0800
+
+ 74xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
+
+ The patch is following the commit 392438406041415fe64ab8748ec5ab5ad01d1cf7
+
+ mpc86xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
+
+ This is needed in unlock_ram_in_cache() because it is called from C and
+ will corrupt the small data area anchor that is kept in R2.
+
+ lock_ram_in_cache() is modified similarly as good coding practice, but
+ is not called from C.
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+
+ also, the r2 is used as global data pointer.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit e053ab1903ccae6048ef759025b9f675bba91450
+Author: Scott Wood <scottwood@freescale.com>
+Date: Tue Oct 28 11:45:04 2008 -0500
+
+ mpc83xx pci: Round up memory size in inbound window.
+
+ The current calculation will fail to cover all memory if
+ its size is not a power of two.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 1c671977dc81359628be27ac99c174e76e8069ba
+Author: Dave Liu <daveliu@freescale.com>
+Date: Thu Oct 23 21:19:13 2008 +0800
+
+ 86xx: remove the unused definition
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit eaa44c5dc83756c3067b9e6c9db626facd0b0660
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Oct 28 17:47:49 2008 +0800
+
+ 86xx: remove the redundant r2 global data pointer save
+
+ The commit 67256678f00c09b0a7f19e862e5c1847553d31bc add
+ the another global data pointer save, but in fact the
+ global data pointer will be initialized in the board_init_r,
+ so remove it such as the 85xx/83xx family.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Acked-by: Kumar Gala <kumar.gala@freescale.com>
+
+commit bd888e9544419665334a6f47f81f34011cea38f3
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Oct 28 17:47:41 2008 +0800
+
+ 86xx: remove the unused code for 86xx family
+
+ I believe these code was copied from 74xx family, but for
+ 86xx, it is unused.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Acked-by: Kumar Gala <kumar.gala@freescale.com>
+
+commit 5ba1ef507402bc5e344dc374203792a40f222e8a
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Oct 28 17:46:35 2008 +0800
+
+ 86xx: remove the second DDR LAW setting for mpc8641hpcn
+
+ The DDR1 LAW will precedence the DDR2 LAW, so remove
+ the second DDR LAW.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Acked-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 137a2dfd11ac51ae3154f13f323609b33a4a072e
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Oct 28 17:46:23 2008 +0800
+
+ 86xx: remove the unused ddr_enable_ecc in the board file
+
+ The DDR controller of 86xx processors have the ECC data init
+ feature, and the new DDR code is using the feature, we don't
+ need the way with DMA to init memory again.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Acked-by: Kumar Gala <kumar.gala@freescale.com>
+
+commit dc2adad85bf580d65916c940683f6e9671e8a5dd
+Author: Dave Liu <daveliu@freescale.com>
+Date: Tue Oct 28 17:46:12 2008 +0800
+
+ 86xx: Move the clear_tlbs before MMU turn on
+
+ We must invalidate TLBs before MMU turn on, but
+ currently the code is not, if there are some stale
+ TLB entry valid in the TLBs, it will cause strange
+ issue.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Acked-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 5cdade07b118d07154cb882650f9778cecc8a87c
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Oct 27 15:57:08 2008 -0500
+
+ mpc8313erdb: Document NAND boot.
+
+ Previously, the documentation claimed that NAND boot is not supported.
+ This is no longer true.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit bd78bc6b2aebf5566aac464f936b88dfd97ab0bd
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Oct 29 14:20:26 2008 -0500
+
+ NAND: Properly create JFFS2 cleanmarkers.
+
+ As reported by Ilko Iliev <iliev@ronetix.at>, the "nand erase clean"
+ command is currently broken, and among other things causes all blocks
+ to be marked bad.
+
+ This implements it properly using MTD_OOB_AUTO, along with some
+ indentation fixes.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit f7fe57c09866b44692d18c8cf22828bd137ec58d
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Oct 29 13:42:41 2008 -0500
+
+ NAND fsl elbc: Set FMR[ECCM] based on page size.
+
+ Hardware expects ECCM 0 for small page and ECCM 1 for large page
+ when booting from NAND, so use those defaults.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit c013b74975dab0805ef6d369b013230c4e8a660d
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed Oct 29 13:32:59 2008 -0400
+
+ NAND: Add support for MPC8572DS board
+
+ This patch defines 1M TLB&LAW size for NAND on MPC8572DS, assigns
+ 0xffa00000 for CONFIG_SYS_NAND_BASE and adds other NAND supports in
+ config file.
+
+ It also moves environment(CONFIG_ENV_ADDR) outside of u-boot image, to
+ make room for the increased code size with NAND enabled.
+
+ Signed-off-by: Jason Jin <Jason.Jin@freescale.com>
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 4e190b03aaf2309bd2e025d1187a2ca880fedc95
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed Oct 29 11:05:55 2008 -0400
+
+ Make Freescale local bus registers available for both 83xx and 85xx.
+
+ - Rename lbus83xx_t to fsl_lbus_t and move it to asm/fsl_lbc.h so that it
+ can be shared by both 83xx and 85xx
+ - Remove lbus83xx_t and replace it with fsl_lbus_t in all 83xx boards
+ files which use lbus83xx_t.
+ - Move FMR, FIR, FCR, FPAR, LTESR from mpc83xx.h to asm/fsl_lbc.h so that
+ 85xx can share them.
+
+ Signed-off-by: Jason Jin <Jason.Jin@freescale.com>
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 695c130e4bf75b444720ddfd83aca88f41c046cf
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Oct 27 15:38:30 2008 -0500
+
+ NAND: Align right column of the shorthelp with other commands.
+
+ I accidentally broke this in when making consistent the partial
+ alignment of the longhelp.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 33efde5ecac91ab118ff00b95a181fd6d75f8645
+Author: Karl Beldan <karl.beldan@gmail.com>
+Date: Mon Sep 15 16:08:03 2008 +0200
+
+ NAND: Reset chip on power-up
+
+ Some chips require a RESET after power-up (e.g. Micron MT29FxGxxxxx).
+ The first command sent is NAND_CMD_READID.
+ Issue a NAND_CMD_RESET in nand_scan_ident before reading the device id.
+ Tested with an MT29F4G08AAC.
+
+ Signed-off-by: Karl Beldan <karl.beldan@gmail.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit c45912d8abc52de796b9059a58faf7c4166eab58
+Author: Scott Wood <scottwood@freescale.com>
+Date: Fri Oct 24 16:20:43 2008 -0500
+
+ NAND: sync with 2.6.27
+
+ This brings the core NAND code up to date with the Linux kernel.
+
+ Since there were several drivers in Linux as of the last update that are
+ not in u-boot, I'm not bringing over new drivers that have been added
+ since in the absence of an interested party.
+
+ I did not update OneNAND since it was recently synced by Kyungmin Park,
+ and I'm not sure exactly what the common ancestor is.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit b1d0db1805c3395149777e507b6da53410abac4e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Oct 21 17:25:47 2008 -0500
+
+ bootm: Added CONFIG_BOOTM_{LINUX, NETBSD, RTEMS}
+
+ Added the ability to config out bootm support for Linux, NetBSD, RTEMS
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 5a98127d81a6eefc5a78a704df619bfe362eeb87
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Oct 21 17:25:46 2008 -0500
+
+ bootm: support subcommands in linux ppc bootm
+
+ Add support for 'bdt', 'cmdline', 'prep' to the linux PPC bootm.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 49c3a861d11735838f1f1b11999ce433006dc919
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Oct 21 17:25:45 2008 -0500
+
+ bootm: Add subcommands
+
+ Add the ability to break the steps of the bootm command into several
+ subcommands: start, loados, ramdisk, fdt, bdt, cmdline, prep, go.
+
+ This allows us to do things like manipulate device trees before
+ they are passed to a booting kernel or setup memory for a secondary
+ core in multicore situations.
+
+ Not all OS types support all subcommands (currently only start, loados,
+ ramdisk, fdt, and go are supported).
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit be08315933537f061bc1ce61f33a29c56458bbad
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Oct 21 17:25:44 2008 -0500
+
+ bootm: Move to using a function pointer table for the boot os function
+
+ This removes a bit of code and makes it easier for the upcoming sub bootm
+ command support to call into the proper OS specific handler.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a369f4a492fa2805d87775d27380f0eeaca35aa6
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Mon Sep 29 23:03:14 2008 +1000
+
+ i386: Renamed show_boot_progress in assembler code
+
+ Renamed show_boot_progress in assembler init phase to
+ show_boot_progress_asm to avoid link conflicts with C version
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit 4442f45b0e1cbad35aa22d4cad22b90a57e3f32d
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Oct 27 16:42:00 2008 -0500
+
+ 85xx: Update MPC85xx_PORDEVSR_IO_SEL mask
+
+ The MPC8572 has a 4-bit wide PORDEVSR IO_SEL field. Other MPC85xx
+ processors have a 3-bit wide IO_SEL field but have the most
+ significant bit is wired to 0 so this change should not affect
+ them.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit cd4251624205cb97104f6e32679dc7754934f711
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Mon Oct 27 16:09:42 2008 -0500
+
+ powerpc: fix pci window initialization to work with > 4GB DRAM
+
+ The existing code has a few errors that need to be fixed in
+ order to support large RAM sizes. Fix those, and add a
+ comment to make it clearer.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 219542a1a66ca017b12860920714a9859b18a5d7
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Oct 27 13:16:20 2008 -0500
+
+ pci/fsl_pci_init: Removed a bunch pointless trailing backslashes.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6b59e03e0237a40a2305ea385defdfd92000978b
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Mon Sep 1 16:21:22 2008 +0200
+
+ lcd: Let the board code show board-specific info
+
+ The information displayed when CONFIG_LCD_INFO is set is inherently
+ board-specific, so it should be done by the board code. The current code
+ dealing with this only handles two cases, and is already a horrible mess
+ of #ifdeffery.
+
+ Yes, this duplicates some code, but it also allows boards to print more
+ board-specific information; this used to be very difficult.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 6f93d2b8fca504200a5758f7c6dd2d6852900765
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Mon Sep 1 16:21:21 2008 +0200
+
+ lcd: Set lcd_is_enabled before clearing the screen
+
+ This allows the logo/info rendering routines to use the regular
+ lcd_putc/lcd_puts/lcd_printf calls.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 15b17ab52b7c15d46d9fc631cc06092e1e764de2
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Mon Sep 1 16:21:20 2008 +0200
+
+ lcd: Implement lcd_printf()
+
+ lcd_printf() has a prototype in include/lcd.h but no implementation. Fix
+ this by borrowing the lcd_printf() implementation from the cogent board
+ code (which appears to use its own LCD framework.)
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 70dbc54c0a5c798bcf82ae2a1e227404f412e892
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Mon Sep 1 16:21:19 2008 +0200
+
+ atmel_lcdfb: Straighten out funky vl_sync logic
+
+ If the board _didn't_ request INVLINE_INVERTED, we set INVLINE_INVERTED,
+ otherwise we don't. WTF?
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 23bb28f0f76b46c4b573374b0bb3b3f23d85ef55
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Mon Sep 1 16:21:18 2008 +0200
+
+ atmel_lcdfb: Eliminate unneeded #include <asm/arch/hardware.h>
+
+ atmel_lcdfb doesn't actually need anything from asm/arch/hardware.h. It
+ includes a file that does, asm/arch/gpio.h, but this file doesn't
+ include <asm/arch/hardware.h> like it's supposed to.
+
+ Add the missing include to asm/arch/gpio.h and remove the workaround
+ from the atmel_lcdfb driver. This makes the driver compile on avr32.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit c2083e0e11a03ef8be2e9f0ed8720fdc20832f3e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Oct 22 14:38:55 2008 -0500
+
+ 86xx: Convert all fsl_pci_init users to new APIs
+
+ Converted MPC8610HCPD, MPC8641HPCN, and SBC8641D to use
+ fsl_pci_setup_inbound_windows() and ft_fsl_pci_setup().
+
+ With these changes the board code is a bit smaller and we get dma-ranges
+ set in the device tree for these boards.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 2dba0dea98c0dee1799ffd6fd6eb541645dbbd98
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Oct 21 08:28:33 2008 -0500
+
+ 85xx: Convert all fsl_pci_init users to new APIs
+
+ Converted ATUM8548, MPC8536DS, MPC8544DS, MPC8548CDS, MPC8568MDS,
+ MPC8572DS, TQM85xx, and SBC8548 to use fsl_pci_setup_inbound_windows()
+ and ft_fsl_pci_setup().
+
+ With these changes the board code is a bit smaller and we get dma-ranges
+ set in the device tree for these boards.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
+
+commit a2aab460727e5f674353a83a81000ef794bffcae
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Oct 23 00:01:06 2008 -0500
+
+ pci/fsl_pci_init: Added fdt helper for setting up bus-ranges & dma-ranges
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
+
+commit b9a1fa9787a3a79573f5f932a4f8aa216bcb1785
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Oct 22 14:06:24 2008 -0500
+
+ pci/fsl_pci_init: Add a common PCI inbound setup function
+
+ Add a common setup function that determines the pci_region(s) based
+ on how much memory we have in the system.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
+
+commit 612ea01018a459234d54ed57ec6a5a244ce75678
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Oct 21 10:13:14 2008 -0500
+
+ pci/fsl_pci_init: Enable larger address and setting inbound windows properly
+
+ * PCI Inbound window was setup incorrectly. The PCI address and system
+ address were swapped. The PCI address should be setting piwar/piwbear
+ and the system address should be setting pitar.
+
+ * Removed masking of addresses to allow for system address to support
+ system address & PCI address >32-bits
+
+ * Set PIWBEAR & POTEAR to allow for full 64-bit PCI addresses
+
+ * Respect the PCI_REGION_PREFETCH for inbound windows
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
+
+commit 8ab451c46b846f2bbd7122b29ffdd9a4a04da228
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Oct 22 23:33:56 2008 -0500
+
+ fdt: Added helper to set PCI dma-ranges property
+
+ Added fdt_pci_dma_ranges() that parses the pci_region info from the
+ struct pci_controller and populates the dma-ranges based on it.
+
+ The max # of windws/dma-ranges we support is 3 since on embedded
+ PowerPC based systems this is the max number of windows.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
+
+commit 3bed2aaf2d50fd13273c14d17d4fd40ef42e0d0f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Oct 23 00:05:47 2008 -0500
+
+ fdt: Add fdt_getprop_u32_default helpers
+
+ Add helper functions to return find a node and return it's property
+ or a default value.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 8ba93f68a1bae89e033527ce67b41b4a87aa5b7f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Oct 21 18:06:15 2008 -0500
+
+ 86xx: Enable 64-bit PCI resources on all Freescale boards
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
+
+commit 0151cbaccf4504821ecfde0217299bd740086bb6
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Oct 21 11:33:58 2008 -0500
+
+ 85xx: Enable 64-bit PCI resources on all Freescale boards
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
+
+commit 30e76d5e3bc4c5208ee63585fe12b409d9308cd8
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Oct 21 08:36:08 2008 -0500
+
+ pci: Allow for PCI addresses to be 64-bit
+
+ PCI bus is inherently 64-bit. While not all system require access to
+ the full 64-bit PCI address range some do. This allows those systems
+ to enable the full PCI address width via CONFIG_SYS_PCI_64BIT.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
+ Acked-by: Wolfgang Denk <wd@denx.de>
+
+commit ae5f943ba8ede448a4b1a145fd8911856701ecc5
+Author: Dave Liu <daveliu@freescale.com>
+Date: Thu Oct 23 21:18:53 2008 +0800
+
+ 85xx: Fix the incorrect register used for DDR erratum1
+
+ The 8572 DDR erratum1:
+ DDR controller may enter an illegal state when operating
+ in 32-bit bus mode with 4-beat bursts.
+
+ Description:
+ When operating with a 32-bit bus, it is recommended that
+ DDR_SDRAM_CFG[8_BE] is cleared when DDR2 memories are used.
+ This forces the DDR controller to use 4-beat bursts when
+ communicating to the DRAMs. However, an issue exists that
+ could lead to data corruption when the DDR controller is
+ in 32-bit bus mode while using 4-beat bursts.
+
+ Projected Impact:
+ If the DDR controller is operating in 32-bit bus mode with
+ 4-beat bursts, then the controller may enter into a bad state.
+ All subsequent reads from memory is corrupted.
+ Four-beat bursts with a 32-bit bus only is used with DDR2 memories.
+ Therefore, this erratum does not affect DDR3 mode.
+
+ Work Arounds:
+ To work around this issue, software must set DEBUG_1[31] in
+ DDR memory mapped space (CCSRBAR offset + 0x2f00 for DDR_1
+ and CCSRBAR offset + 0x6f00 for DDR_2).
+
+ Currenlty, the code is using incorrect register DDR_SDRAM_CFG_2
+ as condition, but it should be DDR_SDRAM_CFG register.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit d5b693090ed08d24c18491df9d8fc7387b2906f3
+Author: Dave Liu <daveliu@freescale.com>
+Date: Thu Oct 23 21:17:19 2008 +0800
+
+ 85xx: remove unused config definition
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 0f060c3bf82832331a509f2e5d2442539e7aad09
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Oct 23 01:47:38 2008 -0500
+
+ 85xx: Add basic e500mc core support
+
+ Introduce CONFIG_E500MC to deal with the minor differences between
+ e500v2 and e500mc.
+
+ * Certain fields of HID0/1 don't exist anymore on e500mc
+ * Cache line size is 64-bytes on e500mc
+ * reset value of PIR is different
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a38a5b6edd30f29fd5fdb1d7f674521906c0e677
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Oct 23 01:47:37 2008 -0500
+
+ 85xx: Use CONFIG_SYS_CACHELINE_SIZE instead of magic number
+
+ Using CONFIG_SYS_CACHELINE_SIZE instead of 31 means we can handle
+ e500mc's 64-byte cacheline properly when it gets added.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 5deb8022c3749faac30e9ad9694691e2442b5c93
+Author: Georg Schardt <schardt@team-ctech.de>
+Date: Fri Oct 24 13:51:52 2008 +0200
+
+ ppc4xx: New board avnet fx12 minimodul
+
+ This patch adds support for the avnet fx12 minimodul.
+ It needs the "ppc4xx: Generic architecture for xilinx ppc405"
+ patch from Ricardo.
+
+ Signed-off-by: Georg Schardt <schardt@team-ctech.de>
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1f4d53260ec6f8f122aed75cce7c757d97a551e0
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Tue Oct 21 18:29:46 2008 +0200
+
+ ppc4xx: Generic architecture for xilinx ppc405(v3)
+
+ As "ppc44x: Unification of virtex5 pp440 boards" did for the xilinx
+ ppc440 boards, this patch presents a common architecture for all the
+ xilinx ppc405 boards.
+
+ Any custom xilinx ppc405 board can be added very easily with no code
+ duplicity.
+
+ This patch also adds a simple generic board, that can be used on almost
+ any design with xilinx ppc405 replacing the file ppc405-generic/xparameters.h
+
+ This patch is prepared to work with the latest version of EDK (10.1)
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 485c00a57fab86f72a3769480c66bf1ca22e1459
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Oct 24 08:56:09 2008 +0200
+
+ ppc4xx: Disable DDR2 autocalibration on Kilauea for now
+
+ Since the new autocalibration still has some problems on some Kilauea
+ boards with 200MHz DDR2 frequency we disable the autocalibration and
+ use the hardcoded values as done before. This seems to work reliably
+ on all known DDR2 frequencies.
+
+ After the autocalibration issue is fixed we will enable it again.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f177f4250c729727b1629fa8d8d6556c999e9b8c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Apr 9 02:02:07 2008 -0400
+
+ Blackfin: fix up UART status bit handling
+
+ Some Blackfin UARTs are read-to-clear while others are write-to-clear.
+ This can cause problems when we poll the LSR and then later try and handle
+ any errors detected.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit ae0910298f31f5bb3d33a64b8467c60ea3c5d6d0
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 20:42:17 2008 -0400
+
+ Blackfin: bf561-ezkit: drop redundant code
+
+ Common Blackfin code already announces CPU information.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit e2eea98bff1369f77a9f59a5fd0bd4928bc3332e
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 20:43:10 2008 -0400
+
+ Blackfin: bf561-ezkit: drop pointless USB code
+
+ The USB/LAN register settings are not actually used/needed in order to
+ drive things from U-Boot, so drop the code.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c23bff63fb03cb9dbcd26522841e53f9b34fa1ab
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 20:47:58 2008 -0400
+
+ Blackfin: linker scripts: force start.o and set initcode boundaries
+
+ Make sure that the start.o object is always the first object in our linker
+ script regardless of configuration settings, and add some linker symbols
+ so the ldr utility can properly locate the initcode when generating a LDR.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit bd33e5c613cf70e3cb51a73fdd653fe83b942bb0
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:19:39 2008 -0400
+
+ Blackfin: small cpu init optimization while setting interrupt mask
+
+ Use the sti instruction to set the initial interrupt mask rather than
+ banging on the core IMASK MMR to save both space and time.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 960922291c9594acb575cec7e47d7bed9b58182c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:18:10 2008 -0400
+
+ Blackfin: set initial stack correctly according to Blackfin ABI
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 25cd33d82ea521b7bd90ca858f8919fae1e9732b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Apr 20 03:11:53 2008 -0400
+
+ Blackfin: make baud calculation more accurate
+
+ We should use the algorithm in the Linux kernel so that the UART divisor
+ calculation is more accurate. It also fixes problems on some picky UARTs
+ that have sampling anomalies.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 0ba1da116e5edcb0c5ae4a7585d73f6548400a06
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 04:21:41 2008 -0400
+
+ Blackfin: decode hwerrcause/excause when crashing
+
+ Having to decode hwerrcause/excause values is a pain, so automate it.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2de95bb20c488f20298df6881b700a5a757ee780
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 04:20:54 2008 -0400
+
+ Blackfin: fix register dump messages
+
+ Make sure we report RETI/IPEND correctly.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 7133999e6f62a9a01f6a8ffe234b8532b3ad1e4b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 04:19:34 2008 -0400
+
+ Blackfin: don't bother displaying reboot msg when crashing
+
+ The hang function already tells you to reboot, so no point in showing it
+ twice.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 70c4c032ea112cc42aa1ce959c33fc4825eaef95
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 1 01:23:48 2008 -0400
+
+ Blackfin: enable support for nested interrupts
+
+ During cpu init, make sure we initialize the CEC properly so that
+ interrupts can fire and be handled while U-Boot is running.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 39782727e185860faa4884c2b04e84cb33d1c6cf
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 03:55:25 2008 -0400
+
+ Blackfin: init NAND before relocating env
+
+ If booting out of NAND, we need to make sure we initialize it properly
+ before attempting to relocate the environment.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 0f9a8819416ba40a53de50af148847a0e508f84d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 18:40:13 2008 -0400
+
+ Blackfin: check cache bits, not cplb bits
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2c1ea9e370cb72dd6a5aa32338e87a8a1f77bd76
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 17:52:59 2008 -0400
+
+ Blackfin: drop unused cache flush code
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 50f0d211912a648e31aa9123b4665a0444bb8ca9
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 15:21:47 2008 -0400
+
+ Blackfin: unify cache handling code
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 3c8798983403cb68a827d7a0d09b1134524a1b7d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 03:39:07 2008 -0400
+
+ Blackfin: only initialize the RTC when actually used
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 621e579b812dd1a2e6777f7cbf6e55e736505823
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 03:44:33 2008 -0400
+
+ Blackfin: fix SWRST register definition
+
+ The SWRST register is a 16bit, not 32bit, register.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 06121c4e2d183887dcd7a4ca2dcd395b213ea15b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 18:54:57 2008 -0400
+
+ Blackfin: build with -fomit-frame-pointer
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit adbfeeb7b32f737a9738daa583350d2bb9ed017a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 17:50:26 2008 -0400
+
+ Blackfin: document some of the blackfin directories
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit e4337968e43698a68ba608369f46d4a4114111ca
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 15:16:56 2008 -0400
+
+ Blackfin: only enable hardware error irq by default
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2b66f08f257ef6a06785f27b3c6dc2a4cfc9cac4
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 13:36:43 2008 -0400
+
+ Blackfin: punt old unused mem_init.h header
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit bcc121a01608042066a19ab5bff5bcfb805bf406
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 13:18:55 2008 -0400
+
+ Blackfin: delete unused page_descriptor_table_size define
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 30fb9d24ae16e5b0ed39e5b7cc85981165ca98bc
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 13:17:03 2008 -0400
+
+ Blackfin: fix typo in boot mode comment and add NAND define
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2e5cbe5461c5c4c6665e318cfe950a5a150d999c
+Author: Ben Maan <moo@cow>
+Date: Thu Aug 7 13:14:21 2008 -0400
+
+ Blackfin: fix port mux defines for BF54x
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 0656ef2ba274910d31364fe022f6c7db0051660d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 13:09:50 2008 -0400
+
+ Blackfin: update anomaly lists
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 50ca95402876cf7bac4e2d4f7855f616a038763f
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 13:08:54 2008 -0400
+
+ Blackfin: unify DSPID/DBGSTAT MMR definitions
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d9d8c7c696dec370ca714c03beb6e79d4c90bd5e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Oct 21 15:53:51 2008 +0200
+
+ Fix strmhz(): avoid printing negative fractions
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4a7f6b750d8de543fdf8e58acd86745010054571
+Author: Richard Retanubun <RichardRetanubun@ruggedcom.com>
+Date: Fri Oct 17 08:55:51 2008 -0400
+
+ mpc83xx: Removed #ifdef CONFIG_MPC834X dependency on upmconfig function
+
+ This is done to allow other 83XX based platforms which also have UPM
+ (e.g. 8360) to configure and use their UPM in u-boot.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 3bf1be3c0cfb1129b68cc1474119e5f323536488
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Tue Oct 14 22:58:53 2008 +0400
+
+ mpc83xx: add support for switching between USB Host/Function for MPC837XEMDS
+
+ With this patch u-boot can fixup the dr_mode and phy_type properties
+ for the Dual-Role USB controller.
+
+ While at it, also remove #ifdefs around includes, they are not needed.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit b3379f3fd13969934c00097c05754e7a8990fd39
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Wed Oct 8 20:52:54 2008 +0400
+
+ mpc83xx: add ELBC NAND support for the MPC837XEMDS boards
+
+ Though NAND chip is replaceable on the MPC837XE-MDS boards, the
+ current settings don't work with the default chip on the board.
+ Nevertheless Freescale's U-Boot sets the option register correctly,
+ so I just dumped the register from the working u-boot. My guess is
+ that the old settings were applicable for some pilot boards, not
+ found in the production.
+
+ This patch also enables FSL ELBC driver so that we could access
+ the NAND storage in the u-boot.
+
+ The NAND support costs about 45KB, so the u-boot no longer fits
+ into two 128KB NOR flash sectors, thus we also have to adjust
+ environment location: add another 128KB to the monitor length.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+ It is due to hardware design and logic defect, that is the
+ I/O[0:7] of NAND chip is connected to LAD[7:0], so when
+ the NAND chip connected to nLCS3, you have to set up the
+ OR3[BCTLD] = '1' for normal operation, otherwise it will have
+ bus contention due to the pin 48/25 of U60 is enabled.
+
+ Setup the OR3[BCTLD] = '1' , that meaning the LBCTL is not
+ asserted upon access to the NAND chip, keep the default state.
+
+ Acked-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 00f7bbae92e3b13f2b37aeb1def9bb12445521b7
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Oct 2 19:17:33 2008 +0400
+
+ mpc83xx: fix PCI scan hang on the standalone MPC837xE-MDS boards
+
+ The MPC837xE-MDS board's CPLD can auto-detect if the board is on the PIB,
+ standalone or acting as a PCI agent. User's Guide says:
+
+ - When the CPLD recognizes its location on the PIB it automatically
+ configures RCW to the PCI Host.
+ - If the CPLD fails to recognize its location then it is automatically
+ configured as an Agent and the PCI is configured to an external arbiter.
+
+ This sounds good. Though in the standalone setup the CPLD sets PCI_HOST
+ flag (it's ok, we can't act as PCI agents since we receive CLKIN, not
+ PCICLK), but the CPLD doesn't set the ARBITER_ENABLE flag, and without
+ any arbiter bad things will happen (here the board hangs during any config
+ space reads).
+
+ In this situation we must disable the PCI. And in case of anybody really
+ want to use an external arbiter, we provide "pci_external_aribter"
+ environment variable.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 1da83a63d8e1b4bddeb82581b1745a09aac3e2d3
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Oct 2 18:32:25 2008 +0400
+
+ mpc83xx: add SGMII riser module support for the MPC8378E-MDS boards
+
+ This involves configuring the SerDes and fixing up the flags and
+ PHY addresses for the TSECs.
+
+ For Linux we also fix up the device tree.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit e6d9c8916de9c24f2c52d0b01cf00d2e74a04cd8
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Oct 2 18:31:59 2008 +0400
+
+ mpc83xx: add TSECs' HRCWH masks for MPC837x processors
+
+ We'll use these masks to parse TSEC modes out of HRCWH.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 6f9cc6608b4e1cefde56c0fb99ae1c95c42575ff
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Oct 2 18:31:56 2008 +0400
+
+ mpc83xx: serdes: add forgotten shifts for rfcks
+
+ The rfcks should be shifted by 28 bits left. We didn't notice the bug
+ because we were using only 100MHz clocks (for which rfcks == 0).
+
+ Though, for SGMII we'll need 125MHz clocks.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 55c531984dcf933e4cd13a187a7e08e873b7ced1
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Oct 2 18:31:53 2008 +0400
+
+ mpc83xx: fix serdes setup for the MPC8378E boards
+
+ MPC837xE specs says that SerDes1 has:
+
+ — Two lanes running x1 SGMII at 1.25 Gbps;
+ — Two lanes running x1 SATA at 1.5 or 3.0 Gbps.
+
+ And for SerDes2:
+
+ — Two lanes running x1 PCI Express at 2.5 Gbps;
+ — One lane running x2 PCI Express at 2.5 Gbps;
+ — Two lanes running x1 SATA at 1.5 or 3.0 Gbps.
+
+ The spec also explicitly states that PEX options are not valid for
+ the SD1.
+
+ Nevertheless MPC8378 RDB and MDS boards configure the SD1 for PEX,
+ which is wrong to do.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 5c2ff323a94e27e481f70c44838d43fcd844dd46
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Wed Sep 10 18:12:37 2008 +0400
+
+ mpc83xx: mpc8360emds: rework LBC SDRAM setup
+
+ Currently 64M of LBC SDRAM are mapped at 0xF0000000 which makes
+ it difficult to use (b/c then the memory is discontinuous and
+ there is quite big memory hole between the DDR/SDRAM regions).
+
+ This patch reworks LBC SDRAM setup so that now we dynamically
+ place the LBC SDRAM near the DDR (or at 0x0 if there isn't any
+ DDR memory).
+
+ With this patch we're able to:
+
+ - Boot without external DDR memory;
+ - Use most "DDR + SDRAM" setups without need to support for
+ sparse/discontinuous memory model in the software.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit def0819e920b05b34b56d8b42e1e43d9b89a52d6
+Author: Wolfgang Denk <wd@xpert.denx.de>
+Date: Tue Oct 21 11:23:56 2008 +0200
+
+ FDT: don't use private kernel header files
+
+ On some systems (for example Fedora Core 4) U-Boot builds with the
+ following wanrings only:
+
+ ...
+ In file included from /home/wd/git/u-boot/include/libfdt_env.h:33,
+ from fdt.c:51:
+ /usr/include/asm/byteorder.h:6:2: warning: #warning using private kernel header; include <endian.h> instead!
+
+ This patch fixes this problem.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f4d14c55504ce40287321bd63ee269e3233ee4ae
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 13 15:15:31 2008 +0200
+
+ ppc4xx: Add 1.0 & 1.066 GHz to canyonlands bootstrap command for PLL setup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 43cbce69d48d052574d71f50724be546d90a46a4
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Oct 13 10:45:14 2008 +0200
+
+ ppc4xx: Correctly setup ranges property in ebc node
+
+ Previously only the NOR flash mapping was written into the ranges
+ property of the ebc node. This patch now writes all enabled chip
+ select areas into the ranges property.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d7b26d58328f137471ea97de382bfa63f7239931
+Author: Dirk Eibach <eibach@gdsys.de>
+Date: Wed Oct 8 15:37:50 2008 +0200
+
+ ppc4xx: Add GDSys neo 405EP board support
+
+ Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c11da194545d2f4bbb54be1bb5e504e20ce8c16c
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Wed Oct 1 14:46:13 2008 +0200
+
+ ppc4xx: Update configs for Netstal boards
+
+ I reorganized my config files, putting the common stuff into netstal-common.h
+ (got the idea by looking a amcc-common.h from Stefan).
+
+ Added stuff to boot the new powerpc linux via NFS (only tested with HCU4).
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c9c11d751e4242cf29c3c3c290d971f6d0cb1d15
+Author: Adam Graham <agraham@amcc.com>
+Date: Wed Oct 8 10:13:19 2008 -0700
+
+ ppc4xx: Add routine to retrieve CPU number
+
+ Provide a weak defined routine to retrieve the CPU number for
+ reference boards that have multiple CPU's. Default behavior
+ is the existing single CPU print output. Reference boards with
+ multiple CPU's need to provide a board specific routine.
+ See board/amcc/arches/arches.c for an example.
+
+ Signed-off-by: Adam Graham <agraham@amcc.com>
+ Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 59217bae40e90982ab5400d849c08af683ace036
+Author: Adam Graham <agraham@amcc.com>
+Date: Wed Oct 8 10:13:14 2008 -0700
+
+ ppc4xx: Add static support for 44x IBM SDRAM Controller
+
+ This patch add the capability to configure a PPC440 based IBM SDRAM
+ Controller with static, compiled-in, values. PPC440 memory subsystem
+ includes a Memory Queue core.
+
+ Signed-off-by: Adam Graham <agraham@amcc.com>
+ Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f09f09d3899017aaaa2b031bba63c271e9c48e4d
+Author: Adam Graham <agraham@amcc.com>
+Date: Wed Oct 8 10:12:53 2008 -0700
+
+ ppc4xx: Add AMCC Arches board support (dual 460GT)
+
+ The Arches Evaluation board is based on the AMCC 460GT SoC chip.
+ This board is a dual processor board with each processor providing
+ independent resources for Rapid IO, Gigabit Ethernet, and serial
+ communications. Each 460GT has it's own 512MB DDR2 memory, 32MB NOR
+ FLASH, UART, EEPROM and temperature sensor, along with a shared debug
+ port. The two 460GT's will communicate with each other via shared
+ memory, Gigabit Ethernet and x1 PCI-Express.
+
+ Signed-off-by: Adam Graham <agraham@amcc.com>
+ Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 055b12f2ffd7c34eea7e983a0588b24f2e69e0e3
+Author: Wolfgang Denk <wd@xpert.denx.de>
+Date: Sun Oct 19 21:54:30 2008 +0200
+
+ TQM8260: environment in flash instead EEPROM, baudrate 115k
+
+ Several customers have reported problems with the environment in
+ EEPROM, including corrupted content after board reset. Probably the
+ code to prevent I2C Enge Conditions is not working sufficiently.
+
+ We move the environment to flash now, which allows to have a backup
+ copy plus gives much faster boot times.
+
+ Also, change the default console initialization to 115200 bps as used
+ on most other boards.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 1836881190b3d8a6918b0d64b39fe32bbbdf85d8
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Sun Oct 19 12:49:19 2008 -0500
+
+ 85xx: Fix compile warning in mpc8536ds.c
+
+ mpc8536ds.c: In function 'is_sata_supported':
+ mpc8536ds.c:615: warning: unused variable 'devdisr'
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8ed44d91c8122d00368523b0b746691c895d3b3c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Oct 19 02:35:50 2008 +0200
+
+ Cleanup: fix "MHz" spelling
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 08ef89ecd174969b3544f3f0c7cd1de3c57f737b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Oct 19 02:35:49 2008 +0200
+
+ Use strmhz() to format clock frequencies
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d50c7d4be150b2252c0d2e16cfcf69643bdd6dc9
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Oct 19 02:35:48 2008 +0200
+
+ strmhz(): Round numbers when printing clock frequencies
+
+ Round clock frequencies for printing.
+
+ Many boards printed off clock frequencies like 399 MHz instead of the
+ exact 400 MHz because numberes were not rounded. This is fixed now.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 681c02d05b29c6d46093525052c74b9c4ddc8b08
+Author: Timur Tabi <timur@freescale.com>
+Date: Mon Oct 20 15:16:47 2008 -0500
+
+ 85xx: properly document MPC85xx_PORDEVSR2_SEC_CFG
+
+ Commit f7d190b1 corrected the value of MPC85xx_PORDEVSR2_SEC_CFG, but forgot
+ to add a comment that the correct value disagrees with the 8544 reference
+ manual. The changelog for that commit is also wrong, as it says "bit 28"
+ when it should be "bit 24".
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit 360fe71e82b83e264c964c9447c537e9a1f643c8
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Oct 17 18:24:06 2008 +0200
+
+ mgcoge: add redundant environment sector
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 53ebf0c470c87d5f9fa76462e5f4064d26a9b16a
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Oct 17 18:23:27 2008 +0200
+
+ mgsuvd: update size of environment
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 2e26d837f11460c0e6dede7d65424a31e0183d09
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Fri Oct 10 11:41:00 2008 +0800
+
+ Enabled the Freescale SGMII riser card on 8536DS
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit 7e183cad0c5ab6415dca95d6ac290ea918b28c55
+Author: Liu Yu <yu.liu@freescale.com>
+Date: Fri Oct 10 11:40:59 2008 +0800
+
+ Enabled the Freescale SGMII riser card on 8572DS
+
+ This patch based on Andy's work.
+ Including command 'pixis_set_sgmii' support.
+
+ Signed-off-by: Liu Yu <yu.liu@freescale.com>
+
+commit bff188baf9427c35745356439435acf3864d4c65
+Author: Liu Yu <yu.liu@freescale.com>
+Date: Fri Oct 10 11:40:58 2008 +0800
+
+ Make pixis_set_sgmii more general to support MPC85xx boards.
+
+ The pixis sgmii command depend on the FPGA support on the board, some 85xx
+ boards support SGMII riser card but did not support this command, define
+ CONFIG_PIXIS_SGMII_CMD for those boards which support the sgmii command.
+
+ Not like 8544, 8572 has 4 eTsec so that the other two's pixis bits
+ are not supported by 8544. Therefor, define PIXIS_VSPEED2_MASK and
+ PIXIS_VCFGEN1_MASK in header file for both boards.
+
+ Signed-off-by: Liu Yu <yu.liu@freescale.com>
+
+commit 5e981d683d2363204c76773941c2e9c2044c808f
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Oct 8 23:38:02 2008 -0500
+
+ Add cpu/8xxx to TAGS_SUBDIRS
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit e1f7d22b8b52fc08c4d17a6a7db1e664281aed63
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Thu Oct 9 01:25:55 2008 -0500
+
+ fsl_law clear enable before changing.
+
+ Debug sessions may have left enabled laws.
+ Changing lawbar with an unkown enabled tgtid could cause problems.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 86be510f7b5443e7e937f696bfbe037fdc740b15
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Thu Oct 9 00:29:27 2008 -0500
+
+ mpc8572 additional end-point mode
+
+ mpc8572 supports all pcie controllers as end-points with cfg_host_agent=0.
+ Include host_agent == 0 decode for end-point determination.
+
+ This is not needed for the ds reference board since pcie3 will be a host
+ in order to connect to the uli chip. Include it here as a reference for
+ other mpc8572 boards.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 6856b3d0221a838580e6bb06f61425fd7529ba93
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Oct 8 23:37:59 2008 -0500
+
+ 85xx if NUM_CPUS>1, print cpu number
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit f7fecc3e25050a036c9f50f0d2b85bc3199a96e0
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Oct 8 23:38:01 2008 -0500
+
+ pixis do not print long help if not configured
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 0e17f02a8a78d85225a4d805f6a1ea95a0a460b5
+Author: Andy Fleming <afleming@freescale.com>
+Date: Tue Oct 7 08:09:50 2008 -0500
+
+ Have u-boot pass stashing parameters into device tree
+
+ Some cores don't support ethernet stashing at all, and some
+ instances have errata. Adds 3 properties to gianfar nodes
+ which support stashing. For now, just add this support to
+ 85xx SoCs.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit c21617fd265b7c126c6e2f2d8a23cdb00d4fade7
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri Oct 3 12:37:57 2008 -0400
+
+ Add DDR options setting on MPC8641HPCN board
+
+ * Add board specific parameter table to choose correct cpo, clk_adjust,
+ write_data_delay based on board ddr frequency and n_ranks.
+
+ * Set odt_rd_cfg and odt_wr_cfg based on the dimm# and CS#.
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 4ca06607d60d0a6378812ef58fd1eab2a7f77111
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri Oct 3 12:37:41 2008 -0400
+
+ Add ddr interleaving suppport for MPC8572DS board
+
+ * Add board specific parameter table to choose correct cpo, clk_adjust,
+ write_data_delay, 2T based on board ddr frequency and n_ranks.
+
+ * Set odt_rd_cfg and odt_wr_cfg based on the dimm# and CS#.
+
+ * Set memory controller interleaving mode to bank interleaving, and disable
+ bank(chip select) interleaving mode by default, because the default on-board
+ DDR DIMMs are 2x512MB single-rank.
+
+ * Change CONFIG_ICS307_REFCLK_HZ from 33333333 to 33333000.
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 1f293b417ac6ab8e317ca2b770377ca93edf2370
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri Oct 3 12:37:26 2008 -0400
+
+ Add debug information for DDR controller registers
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit c9ffd839b1ada502c86f88edaf1534426b6688ce
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri Oct 3 12:37:10 2008 -0400
+
+ Check DDR interleaving mode
+
+ * Check DDR interleaving mode from environment by reading memctl_intlv_ctl and
+ ba_intlv_ctl.
+ * Print DDR interleaving mode information
+ * Add doc/README.fsl-ddr to describe the interleaving setting
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit dfb49108e4f86c2224e1f30124328b0de66ef72e
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri Oct 3 12:36:55 2008 -0400
+
+ Pass dimm parameters to populate populate controller options
+
+ Because some dimm parameters like n_ranks needs to be used with the board
+ frequency to choose the board parameters like clk_adjust etc. in the
+ board_specific_paramesters table of the board ddr file, we need to pass
+ the dimm parameters to the board file.
+
+ * move ddr dimm parameters header file from /cpu to /include directory.
+ * add ddr dimm parameters to populate board specific options.
+ * Fix fsl_ddr_board_options() for all the 8xxx boards which call this function.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit dbbbb3abeff325855cae76e33d69d5665631443f
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri Oct 3 12:36:39 2008 -0400
+
+ Make DDR interleaving mode work correctly
+
+ Fix some bugs:
+ 1. Correctly set intlv_ctl in cs_config.
+ 2. Correctly set sa, ea in cs_bnds when bank interleaving mode is enabled.
+ 3. Set base_address and total memory for each ddr controller in memory
+ controller interleaving mode.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 1c9aa76bf9013069e24258f46f4687c9f98a02d6
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Sep 22 23:40:42 2008 -0500
+
+ 85xx: Enable interrupt and setexpr commands on Freescale 85xx boards
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 7c0d4a7508d252d2d7c137eeb376814132dda30f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Sep 22 14:11:11 2008 -0500
+
+ 85xx: Improve flash remapping on MPC8572DS & MPC8536DS
+
+ Changing the flash from cacheable to cache-inhibited was taking a significant
+ amount of time due to the fact that we were iterating over the full 256M of
+ flash. Instead we can just flush the L1 d-cache and invalidate the i-cache.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 54e091d3b603a3332c619199ca83a07e95960da4
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Sep 22 14:11:10 2008 -0500
+
+ 85xx: Export invalidate_{i,d}cache and add flush_dcache
+
+ Added the ability for C code to invalidate the i/d-cache's and
+ to flush the d-cache. This allows us to more efficient change mappings
+ from cache-able to cache-inhibited.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6250f0f6297c5ba9aecdea6290799a95c5d4b1da
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Oct 17 16:11:52 2008 +0200
+
+ mgcoge, mgsuvd: extract more common code
+
+ in ft_blob_update () for both boards was an unneccessary
+ repetition of code, which this patch moves in a common
+ function for this boards.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 9e299192ca9850cf725456388042a5aa5a6f3ec7
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Oct 17 12:15:55 2008 +0200
+
+ mgcoge, mgsuvd: use in_*/out_* accesors
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit a21ca95f8b9dca22714952b348e4905ac157b5cd
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Oct 17 13:52:51 2008 +0200
+
+ mgsuvd: fix compiler warning when using soft_i2c driver
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit cac9cf7875c2a01d63422820ed4732a9bdf5ab7b
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Oct 17 12:15:05 2008 +0200
+
+ mgsuvd: fix coding style
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 5f4c3137f4f051787707c548133823f1656eb508
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Oct 17 12:13:30 2008 +0200
+
+ mgcoge: Second Flash on CS5 not on CS1
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 76da19df5b8e186d269f29190696bd31fb6c836b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Oct 16 21:52:08 2008 -0500
+
+ Added arch_lmb_reserve to allow arch specific memory regions protection
+
+ Each architecture has different ways of determine what regions of memory
+ might not be valid to get overwritten when we boot. This provides a
+ hook to allow them to reserve any regions they care about. Currently
+ only ppc, m68k and sparc need/use this.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e02d4a9904c8f36395994c0c81469d552b82f5ea
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Oct 16 16:32:35 2008 +0200
+
+ mgcoge: added CONFIG_FIT to support the new u-boot image format
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 6d0f6bcf337c5261c08fabe12982178c2c489d76
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Oct 16 15:01:15 2008 +0200
+
+ rename CFG_ macros to CONFIG_SYS
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 71edc271816ec82cf0550dd6980be2da3cc2ad9e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Oct 13 14:12:55 2008 -0500
+
+ 74xx/7xx/86xx: Rename flush_data_cache to flush_dcache to match 85xx version
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit b799cb4c0eebb0762e91e9653d8b9cc9a98440e3
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Sep 23 10:05:02 2008 -0500
+
+ Expose command table search for sub-commands
+
+ Sub-command can benefit from using the same table and search functions
+ that top level commands have. Expose this functionality by refactoring
+ find_cmd() and introducing find_cmd_tbl() that sub-command processing
+ can call.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f7e51b27508446f8cae3927975817137979ad5e8
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:41:33 2008 +0200
+
+ mgsuvd, mgcoge: added BOOTCOUNT feature.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 8f64da7f83b553889bc08400c97047998382e9d2
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:41:00 2008 +0200
+
+ mgcoge, mgsuvd: added support for the IVM EEprom.
+
+ The EEprom contains some Manufacturerinformation,
+ which are read from u-boot at boot time, and saved
+ in same hush shell variables.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 81473f67810c4c9b7efaed8dee258ed6bc4c7983
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:40:28 2008 +0200
+
+ hush: add showvar command for hush shell.
+
+ This new command shows the local variables defined in
+ the hush shell:
+
+ => help showvar
+ showvar
+ - print values of all hushshell variables
+ showvar name ...
+ - print value of hushshell variable 'name'
+
+ Also make the set_local_var() and unset_local_var ()
+ no longer static, so it is possible to define local
+ hush shell variables at boot time. If CONFIG_HUSH_INIT_VAR
+ is defined, u-boot calls hush_init_var (), where
+ boardspecific code can define local hush shell
+ variables at boottime.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 67b23a322848d828a5e45c0567b72762bfde7abf
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:39:47 2008 +0200
+
+ I2C: adding new "i2c bus" Command to the I2C Subsystem.
+
+ With this Command it is possible to add new I2C Busses,
+ which are behind 1 .. n I2C Muxes. Details see README.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit c24853644ddd2dd2e4246b5854a93e6254a14092
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:39:08 2008 +0200
+
+ mgcoge, mgsuvd: add board specific I2C deblocking mechanism.
+
+ As documented in doc/I2C_Edge_Conditions, adding a
+ board specific deblocking mechanism via CFG_I2C_INIT_BOARD
+ for the mgcoge and mgsuvd board.
+
+ This code was originally written by Keymile in association
+ with Anatech and Atmel in 1998. The Code toggels the SCL
+ until the SCA line goes to HIGH (max. 16 times).
+ And after this, a start condition is sent.
+
+ This is another approach to deblock the I2C Bus. The
+ soft I2C driver actually sends 9 clocks with SDA High,
+ and then a stop at the end, to deblock the I2C Bus.
+
+ Maybe we should use the approach from Keymile as
+ the new standard?
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 4ca107effebfbabac1057c39632105dacef95957
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:38:38 2008 +0200
+
+ soft_i2c: Add CFG_I2C_INIT_BOARD option
+
+ This patch adds the option for a boardspecific
+ I2C deblocking mechanism for the soft i2c driver.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit e5e4edd9f1f76210a09c34ee835f6cff60fdbbd1
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:38:07 2008 +0200
+
+ mgcoge, mgsuvd: add DTT (LM75) support.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 8e442df438ab677057571e3ac01846bff7719bce
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:37:34 2008 +0200
+
+ lm75: Make the LM75 MULTI_BUS compatible.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 12f1678127c1df2b2878ba93c88948bedc060775
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:37:04 2008 +0200
+
+ lm75: fix Codingstyle issues.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit f2202450c75ba6934b356024101500ddcde6e2a6
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:36:33 2008 +0200
+
+ mgcoge, mgsuvd: added EEprom support.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 9661bf9d120f760238b2a073b84f2baf05010057
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:36:03 2008 +0200
+
+ mgcoge, mgsuvd: add I2C support.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 98aed379586a155292efbf3209356836584b601c
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:35:26 2008 +0200
+
+ soft_i2c: prevent compiler warnings if driver does not use CPU Pins.
+
+ This patch fixes the following warnings, when using
+ the soft_i2c driver using no CPU pins on MPC82xx or MPC8xx
+ systems:
+
+ soft_i2c.c: In function 'send_reset':
+ soft_i2c.c:93: warning: unused variable 'immr'
+ soft_i2c.c: In function 'send_start':
+ soft_i2c.c:124: warning: unused variable 'immr'
+ soft_i2c.c: In function 'send_stop':
+ soft_i2c.c:146: warning: unused variable 'immr'
+ soft_i2c.c: In function 'send_ack':
+ soft_i2c.c:171: warning: unused variable 'immr'
+ soft_i2c.c: In function 'write_byte':
+ soft_i2c.c:196: warning: unused variable 'immr'
+ soft_i2c.c: In function 'read_byte':
+ soft_i2c.c:244: warning: unused variable 'immr'
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 799b784aa00cb03a352847ab9f9acdde79b72d21
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:34:45 2008 +0200
+
+ i2c: add CONFIG_I2C_MULTI_BUS for soft_i2c and mpc8260 i2c driver.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 0809ea2f4340ab2047400c7d3d3047f97987d0fd
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:34:05 2008 +0200
+
+ mgcoge: fix Coding Style issues.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit e43a27c49712203fe8848a17714330623edfb2eb
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:33:30 2008 +0200
+
+ I2C: add new command i2c reset.
+
+ If I2C Bus is blocked (see doc/I2C_Edge_Conditions),
+ it is not possible to get out of this, until the
+ complete Hardware gets a reset. This new commando
+ calls again i2c_init (and that calls i2c_init_board
+ if defined), which will deblock the I2C Bus.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 86e9cdf8c415c1a9725e9dae5237ba1e7bd9f686
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:32:25 2008 +0200
+
+ mgsuvd, mgcoge: move this 2 boards in one dir.
+
+ There are some more extensions, which are for both boards
+ and some more boards from this manufacturer will follow soon.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 1c6fe6eac75d695fde677af8330c0dbe75fb6a2b
+Author: Dirk Eibach <eibach@gdsys.de>
+Date: Wed Oct 8 13:44:27 2008 +0200
+
+ hwmon: Add LM63 support
+
+ This patch adds support for the National LM63 temperature
+ sensor with integrated fan control. It's used on the GDSys
+ Neo board (405EP) which will be submitted later.
+
+ Signed-off-by: Dirk Eibach <eibach@gdsys.de>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 7ba890bf2f2b92831420243c058951aa831119fd
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Wed Oct 8 11:01:17 2008 +0900
+
+ Add Red Black Tree support
+
+ Now it's used at UBI module. Of course other modules can use it.
+ If you want to use it, please define CONFIG_RBTREE
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit fbd85ad65dd9c98f36ed3fb12fe41f381b7d4794
+Author: richardretanubun <richardretanubun@ruggedcom.com>
+Date: Mon Oct 6 16:10:53 2008 -0400
+
+ CONFIG_EFI_PARTITION: Added support for EFI partition in cmd_ext2fs.c
+
+ Added support for CONFIG_EFI_PARTITION to ext2 commands.
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
+
+commit 07f3d789b9beb7ce3278c974f4d5c8f51b6ab567
+Author: richardretanubun <richardretanubun@ruggedcom.com>
+Date: Fri Sep 26 11:13:22 2008 -0400
+
+ Add support for CONFIG_EFI_PARTITION (GUID Partition Table)
+
+ The GUID (Globally Unique Identifier) Partition Table (GPT) is a part
+ of EFI. See http://en.wikipedia.org/wiki/GUID_Partition_Table
+
+ Based on linux/fs/partitions/efi.[ch]
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
+
+commit fbc87dc0546dff709b38f358e2c5d5e39c4ca374
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Oct 1 15:26:32 2008 +0200
+
+ FIT: output image load address for type 'firmware', fix message while there
+
+ Now that the auto-update feature uses the 'firmware' type for updates, it is
+ useful to inspect the load address of such images.
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 4bae90904b69ce3deb9f7c334ef12ed74e18a275
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Oct 1 15:26:31 2008 +0200
+
+ Automatic software update from TFTP server
+
+ The auto-update feature allows to automatically download software updates
+ from a TFTP server and store them in Flash memory during boot. Updates are
+ contained in a FIT file and protected with SHA-1 checksum.
+
+ More detailed description can be found in doc/README.update.
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 3f0cf51dabacc2724731c5079a60ea989103bb8f
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Oct 1 15:26:27 2008 +0200
+
+ flash: factor out adjusting of Flash address to the end of sector
+
+ The upcoming automatic update feature needs the ability to adjust an
+ address within Flash to the end of its respective sector. Factor out
+ this functionality to a new function flash_sect_roundb().
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e83cc06375ac2bea0830c6ed0f9d8fdc3c1b27d5
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Oct 1 15:26:29 2008 +0200
+
+ net: Make TFTP server timeout configurable
+
+ There are two aspects of a TFTP transfer involving timeouts:
+ 1. timeout waiting for initial server reply after sending RRQ
+ 2. timeouts while transferring actual data from the server
+
+ Since the upcoming auto-update feature attempts a TFTP download during each
+ boot, it is undesirable to have a long delay when the TFTP server is not
+ available. Thus, this commit makes the server timeout (1.) configurable by two
+ global variables:
+
+ TftpRRQTimeoutMSecs
+ TftpRRQTimeoutCountMax
+
+ TftpRRQTimeoutMSecs overrides default timeout when trying to connect to a TFTP
+ server, TftpRRQTimeoutCountMax overrides default number of connection retries.
+ The total delay when trying to download a file from a non-existing TFTP server
+ is TftpRRQTimeoutMSecs x TftpRRQTimeoutCountMax milliseconds.
+
+ Timeouts during file transfers (2.) are unaffected.
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 49f3bdbba8071f56d950a9498b6cdb998b35340a
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Wed Oct 1 15:26:28 2008 +0200
+
+ net: express the first argument to NetSetTimeout() in milliseconds
+
+ Enforce millisecond semantics of the first argument to NetSetTimeout() --
+ the change is transparent for well-behaving boards (CFG_HZ == 1000 and
+ get_timer() countiing in milliseconds).
+
+ Rationale for this patch is to enable millisecond granularity for
+ network-related timeouts, which is needed for the upcoming automatic
+ software update feature.
+
+ Summary of changes:
+ - do not scale the first argument to NetSetTimeout() by CFG_HZ
+ - change timeout values used in the networking code to milliseconds
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit c68a05feeb88de9fcf158e67ff6423c4cc988f88
+Author: richardretanubun <richardretanubun@ruggedcom.com>
+Date: Mon Sep 29 18:28:23 2008 -0400
+
+ Adds two more ethernet interface to 83xx
+
+ Added as a convenience for other platforms that uses MPC8360 (has 8 UCC).
+ Six eth interface is chosen because the platform I am using combines
+ UCC1&2 and UCC3&4 as 1000 Eth and the other four UCCs as 10/100 Eth.
+
+ Signed-off-by: Richard Retanubun <RichardRetanubun@RugggedCom.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 41410eee472b0f42e03a77f961bbc55ef58f3c01
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed Sep 24 11:42:12 2008 -0500
+
+ Change UEC PHY interface to RGMII on MPC8568MDS
+
+ Change UEC phy interface from GMII to RGMII on MPC8568MDS board
+
+ Because on MPC8568MDS, GMII interface is only recommended for 1000Mbps speed,
+ but RGMII interface can work at 10/100/1000Mbps, and RGMII interface works more stable.
+
+ Now both UEC1 and UEC2 can work properly under u-boot.
+
+ It is also in consistent with the kernel setting for 8568 UEC phy interface.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit b59b16ca24bc7e77ec113021a6d77b9b32fcf192
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Oct 18 21:30:31 2008 +0200
+
+ Prepare v2008.10 release: update CHANGELOG & Makefile
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f7a35a60cf45491871a5c28e9ad24db005487857
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Oct 17 18:24:06 2008 +0200
+
+ mgcoge: add redundant environment sector
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c2537ee85954af9d036b18b644f3e18d837bf4a5
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Oct 17 18:23:27 2008 +0200
+
+ mgsuvd: update size of environment
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit fa7b1c07e9371aea8f87ee6d3c2ea5564bd8cc8d
+Author: Lepcha Suchit <Suchit.Lepcha@freescale.com>
+Date: Thu Oct 16 13:38:00 2008 -0500
+
+ 83xx NAND boot: wait for LTESR[CC]
+
+ At least some revisions of the 8313, and possibly other chips, do not
+ wait for all pages of the initial 4K NAND region to be loaded before
+ beginning execution; thus, we wait for it before branching out of the
+ first NAND page.
+
+ This fixes warm reset problems when booting from NAND on 8313erdb.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit bf29e0ea0af03d593c64614136acc723a7a022a2
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Fri Oct 17 12:54:18 2008 +0200
+
+ ppc4xx: PPC44x MQ initialization
+
+ Set the MQ Read Passing & MCIF Cycle limits to the recommended by AMCC
+ values. This fixes the occasional 440SPe hard locking issues when the 440SPe's
+ dedicated DMA engines are used (e.g. by the h/w accelerated RAID driver).
+
+ Previously the appropriate initialization had been made in Linux, by the
+ ppc440spe ADMA driver, which is wrong because modifying the MQ configuration
+ registers after normal operation has begun is not supported and could
+ have unpredictable results.
+
+ Comment from Stefan: This patch doesn't change the resulting value of the
+ MQ registers. It explicitly sets/clears all bits to the desired state which
+ better documents the resulting register value instead of relying on pre-set
+ default values.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ec081c2c190148b374e86a795fb6b1c49caeb549
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Oct 17 12:51:46 2008 +0200
+
+ ppc4xx: PPC44x MQ initialization
+
+ Set the MQ Read Passing & MCIF Cycle limits to the recommended by AMCC
+ values. This fixes the occasional 440SPe hard locking issues when the 440SPe's
+ dedicated DMA engines are used (e.g. by the h/w accelerated RAID driver).
+
+ Previously the appropriate initialization had been made in Linux, by the
+ ppc440spe ADMA driver, which is wrong because modifying the MQ configuration
+ registers after normal operation has begun is not supported and could
+ have unpredictable results.
+
+ Comment from Stefan: This patch doesn't change the resulting value of the
+ MQ registers. It explicitly sets/clears all bits to the desired state which
+ better documents the resulting register value instead of relying on pre-set
+ default values.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f7d190b1c0b3ab7fc53074ad2862f7de99de37ff
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Oct 16 21:58:50 2008 -0500
+
+ 85xx: Using proper I2C source clock divider for MPC8544
+
+ The MPC8544 RM incorrect shows the SEC_CFG bit in PORDEVSR2 as being
+ bit 26, instead it should be bit 28. This caused in incorrect
+ interpretation of the i2c_clk which is the same as the SEC clk on
+ MPC8544. The SEC clk is controlled by cfg_sec_freq that is reported
+ in PORDEVSR2.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 42653b826adb319a1df06e24ef26096b2a5d9d2a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Oct 16 21:58:49 2008 -0500
+
+ Revert "85xx: Using proper I2C source clock divider for MPC8544"
+
+ This reverts commit dffd2446fb041f38ef034b0fcf41e51e5e489159.
+
+ The fix introduced by this patch is not correct. The problem is
+ that the documentation is not correct for the MPC8544 with regards
+ to which bit in PORDEVSR2 is for the SEC_CFG.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2179c4766bffeece98e5e92040629a96c97e230c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Oct 15 10:19:41 2008 -0500
+
+ 85xx: Fix compile warning
+
+ mpc8536ds.c: In function 'is_sata_supported':
+ mpc8536ds.c:614: warning: unused variable 'devdisr'
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9029b68f3f81b3013044f167ea025e836e6c8c0e
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Wed Oct 15 10:40:24 2008 +0800
+
+ Fix the function conflict in x86emu when DEBUG is on
+
+ The function parse_line() in common/main.c was exposed globally by commit
+ 6636b62a6efc7f14e6e788788631ae7a7fca4537, Result in conflict with the same
+ name funciton in drivers/bios_emulator/x86emu/debug.c when define the DEBUG.
+ This patch fix this by renaming the function in the debug.c file.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit b4dbacf69a669a17487054552fc2761149dd6767
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Oct 15 15:50:45 2008 +0200
+
+ Coding Style cleanup, update CHANGELOG, prepare 2008.10-rc3
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 374b9038293d01d8744a46af9b7854a6fd99b228
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Oct 15 09:51:19 2008 +0200
+
+ Fix compiler warning in lib_ppc/board.c
+
+ Fix compiler warning introduced by commit 0f8cbc18
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9724555755a6f1066636481b41f7094e0ce93a69
+Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
+Date: Thu Oct 9 10:29:14 2008 +0530
+
+ mpc83xx: wait till UPM completes the write to array
+
+ Reference manual states that MxMR[MAD] increment is the indication
+ of write to UPM array is complete. Honour that. Also, make the dummy
+ write explicit.
+
+ also fix the comment.
+
+ Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 03e2dbb18e858e2f7a6aaa437f290f3690d02d51
+Author: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
+Date: Wed Oct 8 18:12:20 2008 -0500
+
+ Remove unwanted ';' at end of define.
+
+ Currently this is not creating any problem. But it will result
+ in compilation error when used as below.
+
+ printf("CFG_SDRAM_CFG2 - %08x\n", CFG_SDRAM_CFG2);
+
+ Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
+
+ continuation of the theme based on git grep "^#define CFG_.*;$" include/
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit b2934a56650e9a6c54432f9ce6dc36757967385e
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Mon Oct 6 10:53:59 2008 -0400
+
+ ARM DaVinci: Add maintainer information for SFFSDR board.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit 12c6670f873ed632c264a6f3e8bf1297d5c3ddbc
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Sat Oct 4 19:26:16 2008 +0200
+
+ api: fix type mismatch
+
+ This patch fixes a type mismatch and thus removes a compiler
+ warning when compiling with CONFIG_API on powerpc.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 9bc2e4eee3bcb8e63847d7a733e0c607807d6141
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Oct 1 12:25:04 2008 -0500
+
+ cmd_i2c: Fix help for CONFIG_I2C_CMD_TREE && !CONFIG_I2C_MULTI_BUS
+
+ Original code displayed:
+ => help i2c
+ i2c i2c speed [speed] - show or set I2C bus speed
+ i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device
+ ...
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit a0b1b610e980e253d4c2519ee15bd0937c3f8be1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Oct 14 22:13:41 2008 +0200
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0f8cbc1829d9c7d9616fd29b366a99d037facdcd
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Fri Oct 10 11:41:01 2008 +0800
+
+ Do not init SATA when disabled on 8536DS.
+
+ SGMII and SATA share the serdes on MPC8536 CPU, When SATA disabled and the
+ driver still try to access the SATA registers, the cpu will hangup.
+ This patch try to fix this by reading the serdes status before the SATA
+ initialize.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 9dbc366744960013965fce8851035b6141f3b3ae
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Fri Oct 10 10:23:22 2008 +0200
+
+ The PIPE_INTERRUPT flag is used wrong
+
+ At a lot of places in the code the PIPE_INTERRUPT flags and friends
+ are used wrong. The wrong bits are compared to this flag resulting
+ in wrong conditions. Also there are macros that should be used for
+ PIPE_* flags.
+ This patch tries to fix them all, however, I was not able to test the
+ changes, because I do not have any of these boards.
+
+ Review required!
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 48867208444cb2a82e2af9c3249e90b7ed4a1751
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Fri Oct 10 10:23:21 2008 +0200
+
+ fix USB initialisation procedure
+
+ The max packet size is encoded as 0,1,2,3 for 8,16,32,64 bytes.
+ At some places directly 8,16,32,64 was used instead of the encoded
+ value. Made a enum for the options to make this more clear and to help
+ preventing similar errors in the future.
+
+ After fixing this bug it became clear that another bug existed where
+ the 'pipe' is and-ed with PIPE_* flags, where it should have been
+ 'usb_pipetype(pipe)', or even better usb_pipeint(pipe).
+
+ Also removed the triple 'get_device_descriptor' sequence, it has no use,
+ and Windows nor Linux behaves that way.
+ There is also a poll going on with a timeout when usb_control_msg() fails.
+ However, the poll is useless, because the flag will never be set on a error,
+ because there is no code that runs in a parallel that can set this flag.
+ Changed this to something more logical.
+
+ Tested on AT91SAM9261ek and compared the flow on the USB bus to what
+ Linux is doing. There is no difference anymore in the early initialisation
+ sequence.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit ec4d8c1c1d94a790c1473ae8aace282b817c3123
+Author: Nikita V. Youshchenko <yoush@cs.msu.su>
+Date: Fri Oct 3 00:03:55 2008 +0400
+
+ fsl_diu: fix alignment error that caused malloc corruption
+
+ When aligning malloc()ed screen_base, invalid offset was added.
+ This not only caused misaligned result (which did not cause hardware
+ misbehaviour), but - worse - caused screen_base + smem_len to
+ be out of malloc()ed space, which in turn caused breakage of
+ futher malloc()/free() operation.
+
+ This patch fixes screen_base alignment.
+
+ Also this patch makes memset() that cleans framebuffer to be executed
+ on first initialization of diu, not only on re-initialization. It looks
+ correct to clean the framebuffer instead of displaying random garbage;
+ I believe that was disabled only because that memset caused breakage
+ of malloc/free described above - which no longer happens with the fix
+ described above.
+
+ Signed-off-by: Nikita V. Youshchenko <yoush@debian.org>
+
+commit 3d0ea3110f3431b6c2aee882784f39f97b20bce9
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Sep 24 10:29:37 2008 +0200
+
+ api: Fix building with CONFIG_API
+
+ This patch fixes building with CONFIG_API and CONFIG_USB_STORAGE.
+
+ USB_MAX_STOR_DEV is defined in include/usb.h, but
+ needed in api/api_storage.c.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit abbb90666d5ef2f500ebbedbb80ff60adc56b043
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Sep 23 12:39:40 2008 -0500
+
+ Remove unused CFG_EEPROM_PAGE_WRITE_ENABLE references
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 81e612014c40c922ec35488d17c504d4e9286f06
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Sep 23 12:38:42 2008 -0500
+
+ Remove CFG_EEPROM_PAGE* dependencies for temperature sensors
+
+ The checks for CFG_EEPROM_PAGE_WRITE_ENABLE and
+ CFG_EEPROM_PAGE_WRITE_BITS in various temperature
+ sensor drivers are not necessary
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit c46980f6d2135ade345dadc1fb1f1f4c8bbf255a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Oct 14 07:04:38 2008 -0400
+
+ cmd_spi: remove broken signed casting for display
+
+ Since we're working with unsigned data, you can't apply a signed pointer
+ cast and then attempt to print the result. Otherwise you get wrong output
+ when the sign bit is set like "0xFF" incorrectly extended to "0xFFFFFFFF".
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d5fd0b49210c941de8a1fce3947ace92243ab5ca
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Oct 14 07:05:24 2008 -0400
+
+ strings cmd: drop old CONFIG_CFG_STRINGS define
+
+ We don't need CONFIG_CFG_STRINGS anymore now that we have the define
+ CONFIG_CMD_STRINGS and Makefile control.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit fecb5ade3b37f62981f2b05b621005850173aaa9
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Fri Sep 19 17:32:49 2008 +0800
+
+ Fix the NAND size overflow issue.
+
+ When the total size of all NAND devices exceeds 4 GiB, the size will
+ overflow. This patch tries to fix this.
+
+ Note that we still have a problem when a single NAND device is bigger
+ than 4 GiB: then the overflow would actually happen earlier, i. e.
+ when storing the size in nand_info[].size, as nand_info[].size is an
+ "u_int32_t".
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 30f574717277238b9014b8136c90eea77196490f
+Author: Louis Su <louis@asix.com.tw>
+Date: Wed Jul 9 11:01:37 2008 +0800
+
+ AX88180: new gigabit network driver
+
+ Signed-off-by: Louis Su <louis@asix.com.tw>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit c9d6b6925344740ca1db2f8a6bab7921ff820de3
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Tue Aug 19 16:07:03 2008 +0200
+
+ enable 10/100M at VSC8601 at tsec driver
+
+ Currently VSC8601 doesn't link with 10/100M partners if the
+ EEPROM/Strapping is not set up.
+ Setting the auto-neg register fixes this.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 702c85b0e876d587c11acdbb55738ee52acd54f4
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Sep 30 15:02:53 2008 +0900
+
+ net: ne2000: Divided a function of NE2000 driver
+
+ get_prom function was used __attriute__ , but it is not enable.
+ ax88796.o does not do link besides ne2000.o. When ld is carried
+ out, get_prom function of ax88796.c is ignored.
+ This problem is a thing by specifications of ld.
+ I checked and test this patch on SuperH and MIPS.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 05c7e9070fe4d751e029fd9524bfbbc93cbb1393
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Oct 14 11:10:59 2008 +0900
+
+ sh: rsk7203: Add smc911x driver support to board config file
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit cae6f909baf86357b3c0bd01acfc414348c4d175
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Oct 9 13:54:33 2008 +0900
+
+ sh: Fix cannot execute a stand-alone application
+
+ Address calculated in EXPORT_FUNC in SuperH was wrong, I revised it.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6df0efd5c86ca1689deeb2738b46b7d83ce228ef
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Wed Oct 8 23:38:00 2008 -0500
+
+ fsl_pci_init do not scan bus when configured as an end-point
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 6f099bbac1ba5dfb46ee7ad29dc53713f0501ba5
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Tue Sep 16 17:07:53 2008 -0400
+
+ ARM DaVinci: Remove redundant setting of GD_FLG_RELOC for sffsdr board.
+
+ This is no longer necessary now that the GD_FLG_RELOC flag is set for
+ all ARM boards.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit d977a57356657ba241256231efca32828a5822f9
+Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+Date: Sat Sep 13 10:04:32 2008 +0200
+
+ Fix lzma uncompress call (image_start wrongly used instead image_len)
+
+ Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+
+commit 392438406041415fe64ab8748ec5ab5ad01d1cf7
+Author: Nick Spence <nick.spence@freescale.com>
+Date: Thu Aug 28 14:09:15 2008 -0700
+
+ mpc86xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
+
+ This is needed in unlock_ram_in_cache() because it is called from C and
+ will corrupt the small data area anchor that is kept in R2.
+
+ lock_ram_in_cache() is modified similarly as good coding practice, but
+ is not called from C.
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+
+commit 5c7cbcd34d0ee566875a4fd0f2a3e5a62bba921c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 19 15:05:34 2008 -0500
+
+ 86xx: remove redudant code with lib_ppc/interrupts.c
+
+ For some reason we duplicated the majority of code in lib_ppc/interrupts.c
+ Not know how that happened, but there is no good reason for it.
+
+ Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why
+ they exist.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0d01f66d235118515b5086b88f82498bc0695d6a
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Thu Oct 9 01:26:36 2008 -0500
+
+ CFI: cfi_flash write fix for AMD legacy
+
+ The flash_unlock_seq requires a sector for AMD_LEGACY.
+ Fix a retcode check typeo.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 542b385a620a1783454a00424930e51895f45073
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Oct 7 13:13:10 2008 +0200
+
+ ppc4xx: Fix USB 2.0 phy reset sequence
+
+ This patch fixes USB 2.0 communication issues on some DU440 boards.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit df8c1ce11114c2260dedb5547281945f7db8fa5c
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Oct 7 13:13:09 2008 +0200
+
+ ppc4xx: Add strapping mode for 667MHz CPU frequency on DU440 board
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6a133d6a00b1fc7b9257cd5925d8cb67f75ecda2
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Oct 7 13:13:08 2008 +0200
+
+ ppc4xx: Fix DU440 GPIO configuration
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 35dd025c70fcc4389317db2f2a9d14795172137d
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Oct 7 13:13:07 2008 +0200
+
+ ppc4xx: Update DU440 config
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f3bf9273939ffe1a60a32a2eef909097f15df56b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Oct 8 15:36:39 2008 -0500
+
+ MPC8572DS: Fix compile warnings
+
+ Commit 445a7b38308eb05b41de74165b20855db58c7ee5 introduced the following
+ compile warnings:
+
+ cmd_i2c.c:112: warning: missing braces around initializer
+ cmd_i2c.c:112: warning: (near initialization for 'i2c_no_probes[0]')
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit dffd2446fb041f38ef034b0fcf41e51e5e489159
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Tue Sep 30 10:55:57 2008 +0200
+
+ 85xx: Using proper I2C source clock divider for MPC8544
+
+ Measurements with our MPC8544 board showed that the I2C bus frequency
+ is wrong by a factor of 1.5. Obviously, the interpretation of the
+ MPC85xx_PORDEVSR2_SEC_CFG bit of the cfg_sec_freq register is not
+ correct. There seems to be an error in the 8544 RM.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit e46c7bfb8bc3c304cedd20f7a365d6e78d7eaf17
+Author: Rafal Czubak <rcz@semihalf.com>
+Date: Wed Oct 8 13:41:30 2008 +0200
+
+ FSL: Fix get_cpu_board_revision() return value.
+
+ get_cpu_board_revision() returned board revision based on information stored
+ in global static struct eeprom. It should instead use one from local struct
+ board_eeprom, to which the data is actually read from EEPROM. The bug led to
+ system hang after printing L1 cache information on U-Boot startup. The problem
+ was observed on MPC8555CDS system and possibly affects other Freescale MPC85xx
+ boards using CFG_I2C_EEPROM_CCID.
+
+ The change has been successfully tested on MPC8555CDS system.
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+
+commit 747f316cca484ed627a97dd3391febabce384186
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Sep 30 20:08:49 2008 +0200
+
+ update uImage FIT multi documentation
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 77a0355f60b801f232ce0a5bfbe95331fa3b6bc0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Sep 30 20:08:36 2008 +0200
+
+ move README.imx31 to doc/ and merge with README.mx31
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1ed7a7f0f571b13d46530f8f8b9aff3957f15a96
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Thu Sep 25 20:54:37 2008 +0200
+
+ i.MX31: switch to CFG_HZ=1000
+
+ Switch to the standard CFG_HZ=1000 value, while at it, minor white-space
+ cleanup, remove CFG_CLKS_IN_HZ from config-headers. Tested on mx31ads,
+ provides 2% or 0.4% precision depending on the
+ CONFIG_MX31_TIMER_HIGH_PRECISION flag. Measured with stop-watch on 100s
+ boot-delay.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit f41b144c11341b571eab7dcef6c4b8e03c92d2b2
+Author: gnusercn <gnusercn@gmail.com>
+Date: Wed Oct 8 18:58:58 2008 +0200
+
+ Fix bug: in arch-arm, env_get_char dose not work fine
+
+ due to the arm implementation which supposed that U-Boot is in RAM
+ when we jump to start_armboot
+
+ Signed-off-by: gnusercn <gnusercn@gmail.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f8a00dea841d5d75de1f8e8107e90ee1beeddf5f
+Author: Adam Graham <agraham@amcc.com>
+Date: Mon Oct 6 10:16:13 2008 -0700
+
+ ppc4xx: Reset and relock memory DLL after SDRAM_CLKTR change
+
+ After changing SDRAM_CLKTR phase value rerun the memory preload
+ initialization sequence (INITPLR) to reset and relock the memory
+ DLL. Changing the SDRAM_CLKTR memory clock phase coarse timing
+ adjustment effects the phase relationship of the internal, to the
+ PPC chip, and external, to the PPC chip, versions of MEMCLK_OUT.
+
+ Signed-off-by: Adam Graham <agraham@amcc.com>
+ Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5297246bbaa9943c0da1ec2e717b72e4ab6b830e
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri Oct 3 11:48:03 2008 -0400
+
+ Remove redundant #define for MPC8536DS
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 445a7b38308eb05b41de74165b20855db58c7ee5
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri Oct 3 11:47:30 2008 -0400
+
+ Add ID EEPROM support for MPC8572DS
+
+ The ID EEPROM on MPC8572DS board locates on I2C bus 1. Its the storage for
+ system information like mac addresses etc. This patch enables it.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 1f3ba317a5c5f3a7aabf580fddc211f4bb5a4540
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri Oct 3 11:46:59 2008 -0400
+
+ Minor fixes for I2C address on MPC8572DS
+
+ MPC8572DS has two i2c buses. This patch moves the DDR SPD_EEPROM to i2c bus 1
+ according to the board spec, and adds the 2nd i2c bus offset.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit c0391111c33c22fabeddf8f4ca801ec7645b4f5c
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Sat Sep 27 14:40:57 2008 +0800
+
+ Fix the incorrect DDR clk freq reporting on 8536DS
+
+ On 8536DS board, When the DDR clk is set async mode(SW3[6:8] != 111),
+ The display is still sync mode DDR freq. This patch try to fix
+ this. The display DDR freq is now the actual freq in both
+ sync and async mode.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit bac6a1d1fa1cd80aa57881fa9c2152b853cd0ed4
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Oct 7 10:28:46 2008 -0500
+
+ 85xx: Remove setting of *cache-line-size in device trees
+
+ ePAPR says if the *cache-block-size is the same as *cache-line-size
+ than we don't need the *cache-line-size property.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a69a42338dd25408f9fd5390a83bc501749c7e1b
+Author: Mark Jackson <mpfj@mimc.co.uk>
+Date: Fri Oct 3 11:48:57 2008 +0100
+
+ MIMC200 board now uses CONFIG_DISABLE_CONSOLE
+
+ Changed MIMC200 board setup and config to use CONFIG_DISABLE_CONSOLE.
+ Also fixed default uImage location.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit cd3cb0d9269d155276b00207e3816a9347fd1c92
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sat Oct 4 07:56:06 2008 -0400
+
+ libfdt: Fix error in documentation for fdt_get_alias_namelen()
+
+ Oops, screwed up the function name in the documenting comment for this
+ function. Trivial correction in this patch.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 9a6cf73a88ddab2e1ac39088f2806177982cc62c
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Wed Aug 20 16:55:14 2008 +1000
+
+ libfdt: Add function to explicitly expand aliases
+
+ Kumar has already added alias expansion to fdt_path_offset().
+ However, in some circumstances it may be convenient for the user of
+ libfdt to explicitly get the string expansion of an alias. This patch
+ adds a function to do this, fdt_get_alias(), and uses it to implement
+ fdt_path_offset().
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit 2215987e100d2a841ae6d48a7cc9bb83fcf22737
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Oct 2 01:55:38 2008 -0400
+
+ cfi_flash: do not reset flash when probe fails
+
+ The CFI flash driver starts at flash_init() which calls down into
+ flash_get_size(). This starts by calling flash_detect_cfi(). If said
+ function fails, flash_get_size() finishes by attempting to reset the
+ flash. Unfortunately, it does this with an info->portwidth set to 0x10
+ which filters down into flash_make_cmd() and that happily smashes the
+ stack by sticking info->portwidth bytes into a cfiword_t variable that
+ lives on the stack. On a 64bit system you probably won't notice, but
+ killing the last 8 bytes on a 32bit system usually leads to a corrupt
+ return address. Which is what happens on a Blackfin system.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3e38577208e4256956bc33bb8bcd0a6b6fab55c3
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Sep 26 17:03:26 2008 +0200
+
+ fdt: Overwrite /chosen node in bootm if it already exists in the dtb
+
+ Set force parameter in fdt_chosen() call in do_bootm_linux() call.
+ Without this, the chosen node is not overwritten if it already
+ exists.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 741a6d010d09b5bafca8e4cdfb6b2f8a2c07994d
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Thu Sep 25 11:02:17 2008 -0500
+
+ Fix an overflow case in fdt_offset_ptr() detected by GCC 4.3.
+
+ Using Gcc 4.3 detected this problem:
+
+ ../dtc/libfdt/fdt.c: In function 'fdt_next_tag':
+ ../dtc/libfdt/fdt.c:82: error: assuming signed overflow does not
+ occur when assuming that (X + c) < X is always false
+
+ To fix the problem, treat the offset as an unsigned int.
+
+ The problem report and proposed fix were provided
+ by Steve Papacharalambous <stevep@freescale.com>.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit bbdbc7cb3abefda5bd998edbcf0508fe6256327d
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Fri Aug 29 14:19:13 2008 +1000
+
+ libfdt: Fix bugs in fdt_get_path()
+
+ The current implementation of fdt_get_path() has a couple of bugs,
+ fixed by this patch.
+
+ First, contrary to its documentation, on success it returns the length
+ of the node's path, rather than 0. The testcase is correspondingly
+ wrong, and the patch fixes this as well.
+
+ Second, in some circumstances, it will return -FDT_ERR_BADOFFSET
+ instead of -FDT_ERR_NOSPACE when given insufficient buffer space.
+ Specifically this happens when there is insufficient space even to
+ hold the path's second last component. This behaviour is corrected,
+ and the testcase updated to check it.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit 33af3e6656e84660d397b5dd95abab2dccc36f83
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Oct 1 12:34:58 2008 +0200
+
+ TQM5200: enable support for ATAPI devices
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d13ff2358ff8c384f52eaf46f5d60258acf96ea6
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Sep 15 05:48:25 2008 +0200
+
+ Revert "ARM: set GD_FLG_RELOC for boards skipping relocation to RAM"
+
+ we need this due to the arm implementation which supposed that U-Boot
+ is in RAM when we jump to start_armboot
+
+ This reverts commit f96b44cef897bd372beb86dde1b33637c119d84d.
+ in order to do it for all arm board
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7fd0bea2e4a78eab7e6693140940f9f9a0009bc2
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Wed Sep 24 08:46:25 2008 -0500
+
+ mpc83xx: don't disable autoboot
+
+ bootdelay set to -1 'permanently' disables autobooting, even if
+ bootcmd is specified. Change to a positive value to allow
+ autobooting when a bootcmd is set.
+
+ Reported-by: Coray Tate <Coray.Tate@freescale.com>
+ Cc: Scott Wood <scottwood@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 2fb29c520c42b7bfef33ea3fd1527eba64099164
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Wed Sep 24 10:42:15 2008 +0900
+
+ mpc83xx: Fix typo in include/mpc83xx.h
+
+ Fixed typo from CONIFG_MPC837X to CONFIG_MPC837X
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 162c41c03179727a1d14262f703c9a8bc40231fa
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Sep 23 09:38:49 2008 -0500
+
+ mpc83xx: add h/w flash protection to board configs
+
+ the operating system may leave flash in a h/w locked state after writing.
+ This allows u-boot to continue to write flash by enabling h/w unlocking
+ by default.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit d26154c9a692586b66eb6d1f8e1b67c75e40ea70
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Sep 11 21:35:36 2008 +0400
+
+ mpc83xx: spd_sdram: fix ddr sdram base address assignment bug
+
+ The spd_dram code shifts the base address, then masks 20 bits, but
+ forgets to shift the base address back. Fix this by just masking the
+ base address correctly.
+
+ Found this bug while trying to relocate a DDR memory at the base != 0.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8fd4166c467a46773f80208bda1ec3b4757747bc
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Sep 22 16:10:43 2008 +0200
+
+ ppc4xx: Canyonlands: Remove unnecessary FDT warning upon DTB fixup
+
+ Depending on the configuration jumper "SATA SELECT", U-Boot disabled
+ either one PCIe node or the SATA node in the device tree blob. This
+ patch removes the unnecessary and even confusing warning, when the node
+ is not found at all.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6e24a1eb1490aa043770bcf0061ac1fad0864fd9
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Fri Sep 19 13:30:06 2008 +0200
+
+ Add missing device types to dev_print() in part.c
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 5fdc215f0b351b0c36cc3f8a0fa5850f24454bed
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Sep 22 22:23:06 2008 +0200
+
+ Fix DPRAM memory leak when CFG_ALLOC_DPRAM is defined, which
+ eventually leads to a machine check. This change assures that DPRAM
+ is allocated only once in that case.
+
+ Signed-off-by: Gary Jennejohn <garyj@denx.de>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a07faf7b9ad5a86763a577c79922c4ff9a70ef23
+Author: Laurent Pinchart <laurentp@cse-semaphore.com>
+Date: Wed Sep 17 17:57:34 2008 +0200
+
+ Fix Spartan-3 definitions.
+
+ A few Spartan-3 definitions erroneously use Spartan-3E size
+ constants. This patch fixes them.
+
+ Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
+
+commit 28113e1f0da4146b823ffce37680d31d5685a60b
+Author: Laurent Pinchart <laurentp@cse-semaphore.com>
+Date: Wed Sep 17 17:41:58 2008 +0200
+
+ Remove duplicate Spartan-3E definition.
+
+ Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5c65ecf7cd94df250b295621f3b24135cbcfe579
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Wed Sep 17 13:46:17 2008 +0200
+
+ socrates: change default mtest address range
+
+ Running mtest command on socrates without specifying
+ an address range crashes the board. This patch changes
+ default mtest address range to prevent this behavior.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit d666b2d59674b5e002c0821b7ab83ec3ff90d670
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Wed Sep 17 12:34:45 2008 +0200
+
+ socrates: fix crash after relocation
+
+ Currently U-Boot crashes after relocation to RAM.
+ Changing the CPO value of the DDR SDRAM TIMING_CFG_2
+ register to READ_LAT + 1 (to the value it was before
+ conversion of socrates to new DDR code) fixes the
+ problem.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 562788b0a303f3528b920d81f547f5ca77ba528e
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Wed Sep 17 11:45:51 2008 +0200
+
+ socrates: fix SPD EEPROM address
+
+ Commit be0bd8234b9777ecd63c4c686f72af070d886517
+ changed SPD EEPROM address to 0x51 and DDR SDRAM
+ detection stopped working. Change this address
+ back to 0x50.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 023824549a370bd185d7129d9a6c86f9be7b86a8
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Sep 22 11:06:50 2008 +0200
+
+ Revert "ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB)"
+
+ This reverts commit 3eec160a3a405b29ce9c06920f6427b9047dd8a8.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e58c41e26cf3c8accd60311be579f452e368e97e
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Thu Sep 18 20:13:08 2008 +0900
+
+ usb: Fix compile warning of r8a66597-hcd
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit b5d10a13525c07ec6374adf840d7c87553b5f189
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Thu Sep 18 19:34:36 2008 +0900
+
+ sh: Fix compile warning
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 4a065abf926f128beb36d93449defa0d690e7fef
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Thu Sep 18 19:04:26 2008 +0900
+
+ sh: Add support watchdog for SH4A core
+
+ Add support watchdog for SH4A core (SH7763, SH7780 and SH7785).
+ And fix some compile warning.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit a03c09c5fdb8430fe2ae6a03f88a0cf7bcc0aa57
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Wed Sep 17 11:45:26 2008 +0900
+
+ sh: Fix typo in SH serial driver
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6b44a439215ba7c63f666f8099213ea4f05f2b07
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Wed Sep 17 11:08:36 2008 +0900
+
+ sh: Add support any page size and empty_zero_page to SH Linux uImage
+
+ Old U-Boot supported 4KB page size only. If this version, Linux
+ kernel can not get command line from U-Boot.
+ SH Linux kernel can change page size and empty_zero_page.
+ This patch support this function and fix promlem.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit ce9f99ddb59628f41dc534e892368a7d66dfc774
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Aug 28 13:40:52 2008 +0900
+
+ sh: rsk7203: Add support pkt_data_pull and pkt_data_push function
+
+ Add function of smc911x, pkt_data_pull and pkt_data_push.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit dd820b03a2f45e86e7960e26729a3b58e3dda44a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Sep 18 13:57:32 2008 +0200
+
+ ADS5121: fix typo in "rootpath" default setting
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c9e8436b10cca53fca4904ecbadcd6231ad72c38
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Tue Sep 16 14:55:44 2008 +0200
+
+ USB layer of U-Boot causes USB protocol errors while using USB memory sticks
+
+ There are several differences between Linux, Windows and U-boot for initialising the
+ USB devices. While analysing the behaviour of U-boot it turned out that U-boot does
+ things really different, and some are wrong (compared to the USB standard).
+
+ This patch fixes some errors:
+ * The NEW_init procedure that was already in the code is good, while the old procedure
+ is wrong. See code comments for more info.
+ * On a Control request the data returned by the device can be more than 8 bytes, while
+ the host limits it to 8 bytes. This caused the host to generate a DataOverrun error.
+ This results in a lot of USB sticks not being recognised, and the transmission ended
+ frequently with a CTL:TIMEOUT Error.
+ * Added a flag CONFIG_LEGACY_USB_INIT_SEQ to allow users to use the old init procedure.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 6f5794a6f78b313231256958fd73673c6aacc116
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Tue Sep 16 14:55:43 2008 +0200
+
+ Refactoring parts of the common USB OHCI code
+
+ This patch refactors some large routines of the USB OHCI code by
+ making some routines smaller and more readable which helps
+ debugging and understanding the code. (Makes the code looks
+ somewhat more like the Linux implementation.)
+
+ Also made entire file compliant to Linux Coding Rules (checkpatch.pl compliant)
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit be19d324edc1a1d7f393d24e10d164cd94c91a00
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Tue Sep 16 14:55:42 2008 +0200
+
+ Fix for USB sticks not working on ARM while using GCC 4.x compilers
+
+ The GCC-compiler makes an optimisation error while optimising the routine
+ usb_set_maxpacket(). This should be fixed in the compiler in the first place,
+ but there lots of compilers out there that makes this error, that it is
+ probably wiser to workaround it in U-boot itself.
+
+ What happens is that the register r3 is used as loop-counter 'i', but gets
+ overwritten later on. From there it starts using register r3 for several other
+ things and the assembler code is becoming a big mess. This is clearly a compiler bug.
+
+ This error occurs on at least several versions of Code Sourcery Lite compilers
+ for ARM. Like the Edition 2008q1, and 2008q3, It has also been seen on other
+ compilers, while compiling for armv4t, or armv5te with Os, O1 and O2.
+
+ We work around it by splitting up this routine in 2 parts, and making sure that
+ the split out part is NOT inlined any longer. This will make GCC spit out assembler
+ that do not show this problem. Another possibility is to adapt the Makefile to stop
+ optimisation for the complete file. I think this solution is nicer.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 87b4ef560cf2da4ccc9e59711ad1ff7fafe96670
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Sep 17 10:17:55 2008 +0200
+
+ Coding style cleanup; update CHANEGLOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3eec160a3a405b29ce9c06920f6427b9047dd8a8
+Author: Victor Gallardo <vgallardo@amcc.com>
+Date: Tue Sep 16 06:59:13 2008 -0700
+
+ ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB)
+
+ Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
+ Signed-off-by: Adam Graham <agraham@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ce47eb402c5e29a025399dc282246414fc492940
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Sep 16 10:04:47 2008 -0500
+
+ Support for multiple SGMII/TBI interfaces for TSEC ethernet
+
+ Fix TBI PHY accesses to use the proper offset in CPU register space. The
+ previous code would incorrectly access the TBI PHY by reading/writing to CPU
+ register space at the same location as would be used to access external PHYs.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 7c803be2eb3cae245dedda438776e08fb122250f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 16 18:02:19 2008 +0200
+
+ TQM8xx: Fix CFI flash driver support for all TQM8xx based boards
+
+ After switching to using the CFI flash driver, the correct remapping
+ of the flash banks was forgotten.
+
+ Also, some boards were not adapted, and the old legacy flash driver
+ was not removed yet.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c0d2f87d6c450128b88e73eea715fa3654f65b6c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Sep 14 00:59:35 2008 +0200
+
+ Prepare v2008.10-rc2
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f12e4549b6fb01cd2654348af95a3c7a6ac161e7
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Sep 13 02:23:05 2008 +0200
+
+ Coding style cleanup, update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0c32565f536609d78feef35c88bbc39d3ac53a73
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Wed Sep 10 09:18:34 2008 -0500
+
+ Update mailing list email and archive addresses
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit fb661ea444ae61de60520f66ae84cdb5dd5a3246
+Author: u-boot@bugs.denx.de <u-boot@bugs.denx.de>
+Date: Thu Sep 11 15:40:01 2008 +0200
+
+ 85xx: socrates: autoprobe Lime chip
+
+ This patch is an attempt to implement autoprobing for the Lime
+ presence on the bus.
+ Configure GPCM for Lime CS2 and try to access chip ID registers.
+ Second read atempt delivers register values if the chip is present.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit e99b607a5ec56ce66e0bcccb78480d5e16fb7bc5
+Author: u-boot@bugs.denx.de <u-boot@bugs.denx.de>
+Date: Thu Sep 11 15:40:01 2008 +0200
+
+ 85xx: socrates: Add support for new image format.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 3c094b652d4107b34641f300a8e9fe16ca15e3d8
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Sep 11 17:28:18 2008 +0900
+
+ sh: Fix compile error for r2dplus
+
+ netdev.h was not include by r2dplus.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+
+commit 56844a22b76c719e600047e23b80465a44d76abd
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Sep 11 08:11:23 2008 +0200
+
+ powerpc: Fix bootm to boot up again with a Ramdisk
+
+ Commit 2a1a2cb6 didnt remove the dummy mem reservation in fdt_chosen,
+ and this stopped Linux from booting with a Ramdisk. This patch fixes
+ this, by deleting the useless dummy mem reservation.
+
+ When booting with a Ramdisk, a fix offset FDT_RAMDISK_OVERHEAD is now
+ added to of_size, so we dont need anymore a dummy mem reservation.
+
+ I measured the value of FDT_RAMDISK_OVERHEAD on a MPC8270 based
+ system (=0x44 bytes) and rounded it up to 0x80).
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit fc9c1727b5b3483ce49c3cb668e8332fb001b8a7
+Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+Date: Mon Sep 8 02:46:13 2008 +0200
+
+ Add support for LZMA uncompression algorithm.
+
+ Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0008b6d968160abe2bfd936493f3a516a7c8da20
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Fri Jun 27 23:04:20 2008 +0400
+
+ fsl_elbc_nand: ecclayout cleanups
+
+ This patch deletes oobavail assignments, they're calculated by the nand
+ core code in nand_scan_tail, plus current oobavail values are wrong for
+ the LP NANDs.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 8f42bf1c393d53a70c2545e9f329d11c46d74794
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Fri Jun 27 23:04:13 2008 +0400
+
+ fsl_elbc_nand: implement support for flash-based BBT
+
+ This patch implements support for flash-based BBT for chips working
+ through ELBC NAND controller, so that NAND core will not have to re-scan
+ for bad blocks on every boot.
+
+ Because ELBC controller may provide HW-generated ECCs we should adjust
+ bbt pattern and bbt version positions in the OOB free area.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 97ae023648e764f794ffb9c52da109d6caf09c47
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Fri Jun 27 23:04:04 2008 +0400
+
+ fsl_elbc_nand: fix OOB workability for large page NAND chips
+
+ For large page chips, nand_bbt is looking into OOB area, and checking
+ for "0xff 0xff" pattern at OOB offset 0. That is, two bytes should be
+ reserved for bbt means.
+
+ But ELBC driver is specifying ecclayout so that oobfree area starts at
+ offset 1, so only one byte left for the bbt purposes.
+
+ This causes problems with any OOB users, namely JFFS2: after first mount
+ JFFS2 will fill all OOBs with "erased marker", so OOBs will contain:
+
+ OOB Data: ff 19 85 20 03 00 ff ff ff 00 00 08 ff ff ff ff
+ OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+ OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+ OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+
+ And on the next boot, NAND core will rescan for bad blocks, then will
+ see "0xff 0x19" pattern, and will mark all blocks as bad ones.
+
+ To fix the issue we should implement our own bad block pattern: just one
+ byte at OOB start. Though, this will work only for x8 chips. For x16
+ chips two bytes must be checked. Since ELBC driver does not support x16
+ NANDs (yet), we're safe for now.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 7238ada313057a85409485b8ee21515dc10c07a5
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Sep 12 13:52:21 2008 +0200
+
+ MPC512x: reduce timeout waiting for Ethernet autonegotiation to 2.5s
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit b18410e508a12ba0a177dfc2a386857c806fa96d
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Sep 11 13:05:56 2008 +0200
+
+ ppc4xx: Enable device tree (FDT) support in zeus board port
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7bf5ecfa50722a9feb45ea8f04da75f5d406f20b
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Sep 10 16:53:47 2008 +0200
+
+ ppc4xx: Fix SDRAM inititialization of multiple 405 based board ports
+
+ This patch fixes a problem introdiced with patch
+ bbeff30c [ppc4xx: Remove superfluous dram_init() call or replace it by
+ initdram()].
+
+ The boards affected are:
+ - PCI405
+ - PPChameleonEVB
+ - quad100hd
+ - taihu
+ - zeus
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 61737c59a3285f6fadf96a5836879898c04ec28d
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Thu Sep 11 19:41:26 2008 -0400
+
+ ppc4xx: Add .gitignore file to xilinx-ppc440 boards
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2bec498ed1164a58cd8437b561bdc4551d69f9bf
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Thu Sep 11 19:41:25 2008 -0400
+
+ ppc4xx: Fix compilation of v5fx30teval_flash
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4bed9deebbd7ee6f0ba746b44d47a922156f7404
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Wed Sep 10 17:44:30 2008 -0400
+
+ ppc4xx: Fix in-tree build for ppc440-generic boards
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 06c4ab50f5ccfb55ea2dd324aa28b2b06102e416
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Sep 12 02:20:47 2008 +0200
+
+ ARM: synchronize mach-types.h with linux 2.6.27-rc6
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 3ee9f03f588ad605e3fd10530237f9e3e2e7ab4c
+Author: Jens Scharsig <esw@bus-elektronik.de>
+Date: Fri Sep 12 02:20:47 2008 +0200
+
+ at91rm9200: fix errors with CONFIG_CMD_I2C_TREE
+
+ This patch prevents linker error on AT91RM9200 boards, if
+ CONFIG_CMD_I2_TREE is set.
+ It implements i2c_set_bus_speed and i2c_get_bus_speed as a dummy function.
+
+ Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
+
+commit b5b0344957d32e3d07a8dd72fce64fb48e680ba4
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Fri Sep 12 02:20:47 2008 +0200
+
+ ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c
+
+ ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit 03db53335c8eba656a7c44d1555b1a4514383e33
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Fri Sep 12 02:20:46 2008 +0200
+
+ make: Remove redundant __ARM__ addition when cross-compiling on *BSD
+
+ __ARM__ is given by arm_config.mk automatically.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 8cc62a7d9c77f8ef5166fb57322c4a6ddac320b4
+Author: Claudio Scordino <claudio@evidence.eu.com>
+Date: Fri Sep 12 02:20:46 2008 +0200
+
+ Fix MACH_TYPE for the AT91RM9200DK board.
+
+ Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>
+
+commit 274737e5eb25b2bcd3af3a96da923effd543284f
+Author: Andrew Dyer <adyer@righthandtech.com>
+Date: Fri Sep 12 02:20:46 2008 +0200
+
+ i.mx change get_timer(base) to return time since base
+
+ This patch changes get_timer() for i.MX to return the time since
+ 'base' instead of the time since the counter was at zero.
+
+ Symptom seen is flash timeout errors when erasing or programming a
+ sector using the common cfi flash code.
+
+ Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
+
+commit 48fed40575b3e8eae960eb0141509ddd9a73012a
+Author: Andrew Dyer <adyer@righthandtech.com>
+Date: Fri Sep 12 02:20:46 2008 +0200
+
+ i.MX use u-boot baud rate and don't assume UART master clock
+
+ 1) Change the i.MX serial driver to use the baud rate set in the
+ u-boot environment
+
+ 2) don't assume a 16MHz value for PERCLK1 in baud rate calculations
+
+ 3) don't write a 1 to the RDR bit in the USR2 reg. (bit is not "write
+ one to clear" like other status bits in the reg.)
+
+ Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
+
+commit 6e1551a870d360805b9d172dc56d935064abe71d
+Author: Andrew Dyer <adyer@righthandtech.com>
+Date: Fri Sep 12 02:20:46 2008 +0200
+
+ arm920t fix constant error in start.S
+
+ Code in cpu/arm920t/start.S will die with a compilation error if
+ CONFIG_STACKSIZE + CFG_MALLOC_LEN works out to an invalid constant for
+ the ARM sub instruction. Change the code so that each is subtracted
+ independently to avoid the error.
+
+ Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
+
+commit b23253835f871cd9bd8e955b9a971d18a7d4ff56
+Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
+Date: Fri Sep 12 02:20:40 2008 +0200
+
+ ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h
+
+ - Correct Invalid #define of MPUTIM_PTV_MASK for
+ omap1510 & omap730 register definition
+
+ MPUTIM_PTV_MASK is defined as
+ #define MPUTIM_PTV_MASK (0x7<<PTV_BIT)
+
+ while it should have been
+ #define MPUTIM_PTV_MASK (0x7<<MPUTIM_PTV_BIT)
+
+ - Below Patch corrects the same
+
+ Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
+
+commit c455d07396dddc9864fd8dbb965ee10fe95ce8cf
+Author: Adrian Filipi <adrian.filipi@eurotech.com>
+Date: Fri Jul 18 11:52:02 2008 -0400
+
+ Set up SD/MMC OCR as comment describes. i.e. 3.2-3.4v.
+
+ Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
+
+commit eb16135df20535b0d19969f50fb5bd17f95e9c25
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Thu Aug 28 12:25:11 2008 +0200
+
+ i.MX31: document timer precision option
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 1a6337b01351b82a45b0defa76f08744511c580b
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Fri Aug 29 10:36:18 2008 +0200
+
+ i.MX31: Make the SPI bus and chip select configurable for MC13783
+
+ The i.MX31 has three SPI buses and each bus has several chip selects
+ and the MC13783 chip can be connected to any of these. The current
+ RTC driver for MC13783 is hardcoded for CSPI2/SS2.
+
+ This patch makes make MC13783 SPI bus and chip select configurable
+ via CONFIG_MC13783_SPI_BUS and CONFIG_MC13783_SPI_CS.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit 8c4ebec25b21e355b8488698ec1594da9701fff4
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Fri Aug 29 10:36:17 2008 +0200
+
+ i.MX31: Add reset_timer() and modify get_timer_masked().
+
+ This patch adds the reset_timer() function (needed by nand_base.c) and
+ modifies the get_timer_masked() to work in the same way as the omap24xx
+ function.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit deeec4991a55de243787002ede24d2331d234fc8
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:09 2008 +0200
+
+ ap325rxa: remove duplicate CONFIG_FLASH_CFI_DRIVER
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit a3a08c0cedd329edf5256e1d6b2bad0fca002725
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:09 2008 +0200
+
+ bootm arm/avr32/blackfin/microblaze/nios2/sh: remove no more need 'error' label
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0e8d158664a913392cb01fb11a948d83f72e105e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:06 2008 +0200
+
+ rename CFG_ENV macros to CONFIG_ENV
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1ede78710c3bf9ad6f4a53aaddc3bcc86fedd9df
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:05 2008 +0200
+
+ nvedit: rename error comment to CONFIG_ENV_IS_IN_
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit b64b775e7546ed138df360ceb3a71ee358cb9a01
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:05 2008 +0200
+
+ cmd_mem: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 8a40fb148efa442d6526eac46a2001e4c64d28ff
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:05 2008 +0200
+
+ move cmd_get_data_size to command.c
+
+ add CMD_DATA_SIZE macro to enable it
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 507641d2491980531932b9f25dab37fe5e6c3a1a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:04 2008 +0200
+
+ env_flash: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 5a1aceb0689e2f731491838970884a673ef7e7d3
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:04 2008 +0200
+
+ rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASH
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7d9b5bae5ba558c7464d89d033aca04acaf01172
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:03 2008 +0200
+
+ cleanup use of CFG_ENV_IS_IN_FLASH
+
+ - #if CFG_ENV_IS_IN_FLASH
+ - #if (CFG_ENV_IS_IN_FLASH == 1)
+ - #define CFG_ENV_IS_IN_FLASH 0
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0cf4fd3cf8d0e00605bec5fc56f89c6415015a46
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:01 2008 +0200
+
+ rename environment.c in env_embedded.c to reflect is functionality
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c0878af6e32f0fd8e13a6ca315b9add64441115a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:01 2008 +0200
+
+ env_nowhere: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 93f6d72544da4510a146bc4c93d609b0116cde37
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:00 2008 +0200
+
+ rename CFG_ENV_IS_NOWHERE in CONFIG_ENV_IS_NOWHERE
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2556ef78113b5f089dfcac5da90bf31dd568397b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:00 2008 +0200
+
+ env_sf: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0b5099a8419bf9c828df5e3e2c6878dc300d98e3
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:00 2008 +0200
+
+ rename CFG_ENV_IS_IN_SPI_FLASH in CONFIG_ENV_IS_IN_SPI_FLASH
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 55c5f49910ec8225347aa1d211352a84de6649b4
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:48:00 2008 +0200
+
+ env_onenand: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9656138ff1a34d4c4768db6b490deffc40ee674b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:47:59 2008 +0200
+
+ rename CFG_ENV_IS_IN_ONENAND in CONFIG_ENV_IS_IN_ONENAND
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 957a0e69575683efd70ace147746bbb3d8e7c501
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:47:59 2008 +0200
+
+ env_nvram: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9314cee6917444ab88bd4e758da7a30975120187
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:47:59 2008 +0200
+
+ rename CFG_ENV_IS_IN_NVRAM in CONFIG_ENV_IS_IN_NVRAM
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 06f61354397911a4c121dfa51b6ccbf7e300d48b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:47:59 2008 +0200
+
+ env_nand: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 51bfee192099206a4397f15f3b93516e01f58ab0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:47:58 2008 +0200
+
+ rename CFG_ENV_IS_IN_NAND in CONFIG_ENV_IS_IN_NAND
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d8cc04d0ac9c7c0d12454708aaf5489f8532bbf9
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:47:58 2008 +0200
+
+ env_dataflash: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 057c849c45b9ee19df8ff3acdeee66be52819962
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:47:58 2008 +0200
+
+ rename CFG_ENV_IS_IN_DATAFLASH in CONFIG_ENV_IS_IN_DATAFLASH
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d1034bc8db60fa6bd419328baf6a75cb0645cee8
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Sep 10 22:47:52 2008 +0200
+
+ cmd_eeprom: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit bf5a7710ec70e90e98f451b4ba0eb65f9ffc34eb
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Sep 5 09:19:54 2008 +0200
+
+ env_eeprom: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit bb1f8b4f8bb0bfce52e0faa4637b975b745824b3
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Sep 5 09:19:30 2008 +0200
+
+ rename CFG_ENV_IS_IN_EEPROM in CONFIG_ENV_IS_IN_EEPROM
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 32628c5008105a732212003d83b75f05e5243bb2
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 30 23:54:58 2008 +0200
+
+ cmd_mac: Move conditional compilation to Makefile
+
+ finish remaning CFG_ID_EEPROM in CONFIG_ID_EEPROM
+ start in commit ad8f8687b78c3e917b173f038926695383c55555
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e5648acab153f0f429bfc714902c5aaa7879f71b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 30 23:47:41 2008 +0200
+
+ cmd_fdc: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2d02d91d530e831f2dab228085963fc1d5b71cb0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 30 23:47:38 2008 +0200
+
+ common/Makefile: add core command section
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0d92d4a699fb1a39381d98571dc51fb97e5bcf9e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 30 23:29:57 2008 +0200
+
+ cmd_vfd: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6644641d072aee3087da129d8443187196a4d8a9
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Sep 10 11:48:49 2008 -0500
+
+ delta, zylonite: Update nand_oobinfo to nand_ecclayout.
+
+ This is part of the switch to newer upstream MTD code.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 9b05aa788bfdd3264ff1bc9418cb19550a7234e4
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Sat Aug 30 17:06:55 2008 -0400
+
+ ARM DaVinci: Fix broken HW ECC for large page NAND.
+
+ Based on original patch by Bernard Blackham <bernard@largestprime.net>
+
+ U-boot's HW ECC support for large page NAND on Davinci is completely
+ broken. Some kernels, such as the 2.6.10 one supported by
+ MontaVista for DaVinci, rely upon this broken behaviour as they
+ share the same code for ECCs. In the existing scheme, error
+ detection *might* work on large page, but error correction
+ definitely does not. Small page ECC correction works, but the
+ format is not compatible with the mainline git kernel.
+
+ This patch adds ECC code that matches what is currently in the
+ Davinci git repository (since NAND support was added in 2.6.24).
+ This makes the ECC and OOB layout written by u-boot compatible with
+ Linux for both small page and large page devices and fixes ECC
+ correction for large page devices.
+
+ The old behaviour can be restored by defining the macro
+ CFG_DAVINCI_BROKEN_ECC, which is undefined by default.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+ Acked-by: Sergey Kubushyn <ksi@koi8.net>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 0b7c5639891f4103a0e31ec7ae0beb3e97ed3836
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Sep 10 11:15:28 2008 +0200
+
+ muas3001: update BR4 settings
+
+ Also set up the port pins for using I2C.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 3591293509e0c0bcf244b0f974775bff2e25697e
+Author: Petri Lehtinen <petri.lehtinen@inoi.fi>
+Date: Wed Sep 10 09:43:49 2008 +0300
+
+ autoscr: Fix one-character lines and non-newline terminated scripts
+
+ When not using hush, the autoscr command now executes lines that are
+ only one character long. It also runs the last line of scripts even if
+ it does not end in a newline.
+
+ Signed-off-by: Petri Lehtinen <petri.lehtinen@inoi.fi>
+
+commit 9ebbb54f7a25055010fa6668eba40c72a4c4f985
+Author: Victor Gallardo <vgallardo@amcc.com>
+Date: Tue Sep 9 15:13:29 2008 -0700
+
+ ppc4xx: Allow DTT_I2C_DEV_CODE configured by CFG_I2C_DTT_ADDR
+
+ On AMCC Arches board DTT_I2C_DEV_CODE is different then canyonlands
+ and glacier.
+
+ Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
+
+commit 245f6ef3e11828cb46188e396fb1e67f7b07cd03
+Author: Heiko Schocher <hs@denx.de>
+Date: Mon Sep 8 10:21:11 2008 +0200
+
+ muas3001: added support for the LM75 sensor.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 4a02a2dca82aeab8f839db9dd35fda9d5412dacb
+Author: Heiko Schocher <hs@denx.de>
+Date: Mon Sep 8 10:20:19 2008 +0200
+
+ muas3001: activate WDT for the muas3001 board.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit a55d074dac24dc941f1afb5b4e94b1509bfdda4e
+Author: Heiko Schocher <hs@denx.de>
+Date: Mon Sep 8 10:19:36 2008 +0200
+
+ muas3001: added 64MB SDRAM autodetection.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 5251469943895de4bb9a04d5053352cc22acb7d5
+Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
+Date: Thu Aug 21 07:12:26 2008 -0700
+
+ Fix printf errors under -DDEBUG
+
+ Fix printf format-string/arg mismatches under -DDEBUG.
+
+ These warnings occur with DEBUG defined for a platform using
+ cpu/mpc85xx. Users of other architectures can unearth similar
+ problems by adding the line "CFLAGS += -DDEBUG=1" in config.mk right
+ after "CFLAGS += $(call cc-option,-fno-stack-protector)".
+
+ Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 8b9e4787641719d709bfa2ebeb72e8bd4952bee7
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 9 23:55:18 2008 +0200
+
+ Update CHANGELOG, prepare 2008-10-rc1 release
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e0ff3d350d6b7960deb5a881dfc5acf3a63ef676
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Sep 8 08:51:29 2008 -0500
+
+ 85xx: Ensure timebase is zero on secondary cores
+
+ The e500um says the timebase is volatile out of reset. To ensure
+ TB sync works we need to make sure its zero.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 54b4ab3c961a2012a1c2a09c259a6343323ec551
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Sep 9 22:18:24 2008 +0200
+
+ bootm_load_os: fix load_end debug message
+
+ print load_end value not pointer
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1d9af0be764960e6cc1c093e97176c3542796820
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Sep 9 22:18:23 2008 +0200
+
+ bootm: enable fdt support only on ppc, m68k and sparc
+
+ ...as done in image.c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 748b5274e76f81df85cfcffaffedc323678d0623
+Author: Markus Heidelberg <markus.heidelberg@web.de>
+Date: Tue Sep 9 18:51:05 2008 +0200
+
+ common/cmd_mem.c: remove nested #if defined(CONFIG_CMD_MEMORY)
+
+ Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
+
+commit 650632fe4ca09cfd0e5e6a593f2efc02ef87a58c
+Author: Markus Heidelberg <markus.heidelberg@web.de>
+Date: Tue Sep 9 17:31:46 2008 +0200
+
+ gitignore: add tags files and Vim swap file
+
+ Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
+
+commit 1d9b67b23fca6a25154333733204339802510720
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Tue Sep 9 17:52:47 2008 +0900
+
+ add board_eth_init() for sh7785lcr board
+
+ Fix the problem that cannot work RTL8169 on sh7785lcr board.
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+
+commit 7b7a869a8ba3bd6d9bffb748c91232141330f514
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 6 16:08:41 2008 -0500
+
+ mtd: SPI Flash: Support the STMicro Flash
+
+ Add MTD SPI Flash support for M25P16, M25P20, M25P32,
+ M25P40, M25P64, M25P80, M25P128.
+
+ Signed-off-by: Jason McMullan <mcmullan@netapp.com>
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 4bc07c368076560ed7fa4c9f987c71a8521488a9
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 9 17:55:31 2008 +0200
+
+ trab: fix build problem after change to use do_div()
+
+ We must link with libgeneric now.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3b20fd83c73c22acfcb0c6663be747bd5c8b7011
+Author: Ryan CHEN <ryan.chen@st.com>
+Date: Wed Aug 20 13:00:17 2008 -0400
+
+ Correct drv_usb_kbd_init function
+
+ The patch is that check if usb_get_dev_index() function return valid
+ pointer. If valid, continue. Otherwise return -1.
+
+ Signed-off-by: Ryan Chen <ryan.chen@st.com>
+ Acked-by: Markus Klotzbuecher <mk@denx.de>
+
+commit eba1f2fc75f128a9a6c1328d786996a93fd7a707
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Wed Aug 20 11:22:02 2008 +0200
+
+ Make usb-stop() safe to call multiple times in a row.
+
+ A recent commit (936897d4d1365452bbbdf8430db5e7769ef08d38)
+ enabled the usb_stop() command in common/cmd_bootm.c which was
+ not enabled for some time, because no board did actually set the
+ CFG_CMD_USB flag. So, now the usb_stop() is executed before
+ loading the linux kernel.
+
+ However, the usb_ohci driver hangs up (at least on AT91SAM) if the
+ driver is stopped twice (e.g. the peripheral clock is stopped on AT91).
+ If some other piece of code calls usb_stop() before the bootm command,
+ this command will hangup the system during boot.
+ (usb start and stop is typically used while booting from usb memory stick)
+
+ But, stopping the usb stack twice is useless anyway, and a flag already
+ existed that kept track on the usb_init()/usb_stop() calls.
+ So, we now check if the usb stack is really started before we stop it.
+
+ This problem is now fixed in both the upper as low-level layer.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Acked-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 2c8ccf2728f5e67d991cecf76c4057db75a87b67
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 9 16:55:47 2008 +0200
+
+ Makefile: fix bug introduced by commit 47ffd6c2
+
+commit 880f6a5d7596f42db5ff8803b797b78ec5b146e0
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Tue Sep 9 10:00:33 2008 -0400
+
+ ppc4xx: ppc440-generic-ALL: Fix out of tree build v2
+
+ This patch solves the problems compiling ml507, v5fx30teval and
+ ppc440-generic out of tree.
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+
+commit 47bebe34ca4e33bab0e822e4ceebbec2590ccbcb
+Author: NÃcolas Carneiro Lebedenco <nicolas.lebedenco@tasksistemas.com.br>
+Date: Thu Sep 4 15:35:46 2008 -0300
+
+ Fix dev_print when called from usb_stor_info (usb storage command)
+
+ Fix output of the usb storage command. It was printing "Device 0: not
+ available" because IF_TYPE_USB was not included into the switch
+ statement.
+
+ Signed-off-by: Nicolas Lebedenco <nicolas.lebedenco@tasksistemas.com.br>
+
+commit a4f243452cc8ce0c2c9b51a2520db4bde5f472de
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue Sep 9 12:58:16 2008 +0200
+
+ FIT: make iminfo check hashes of all images in FIT, return 1 on failed check
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 919f550dc11a13abf01c6bc713c968de790b8d7c
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue Sep 9 12:58:15 2008 +0200
+
+ FIT: add ability to check hashes of all images in FIT, improve output
+
+ - add function fit_all_image_check_hashes() that verifies if all
+ hashes of all images in the FIT are valid
+ - improve output of fit_image_check_hashes() when the hash check fails
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 1de1fa408967cef6804bb046b904114519bb36f0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Sep 8 20:54:39 2008 +0200
+
+ qemu_mips: Update linux bootm to support dynamic cmdline
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f5ed9e39088ecfa5a5f3ef47b08e5bda7890d764
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Sep 8 14:56:49 2008 -0500
+
+ Add support for booting of INTEGRITY operating system uImages
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 72f1b65f1b68bc6ed0d182eda1f3d6cf51b6414a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Sep 8 21:01:29 2008 +0200
+
+ mips/bootm: Fix typo in commit c4f9419c, "initrd_start" replaced by "images->rd_start"
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9ba2e2c8191353d75b2d535e672a125be7b84c03
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Sep 8 13:57:12 2008 -0500
+
+ Remove support for booting ARTOS images
+
+ Pantelis Antoniou stated:
+ AFAIK, it is still used but the products using PPC are long gone.
+ Nuke it plz (from orbit).
+
+ So remove it since it cleans up a usage of env_get_char outside of
+ the environment code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 47ffd6c2fc72b46daa9d5d59eedb894fab2b7ee1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 9 15:45:18 2008 +0200
+
+ Makefile: compile and link each module just once
+
+ Several source files need to be compiled and linked when one or more
+ config options are selected. To allow for easy selection in the
+ Makefiles yet to avoild multiple compilation (which costs build time)
+ and especially multiple linking (which causes errors), we use
+ "COBJS = $(sort COBJS-y)" which eliminates duplicates.
+
+ By courtesy of Detlev Zundel who suggested this approach.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 48d0192fe869948fef14b460b5f0c85bca933693
+Author: Andreas Engel <andreas.engel@ericsson.com>
+Date: Mon Sep 8 14:30:53 2008 +0200
+
+ Moved conditional compile into Makefile
+
+ Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
+
+commit 20c9226cb8cab08a111ee73db04e62d943ee0c97
+Author: Andreas Engel <andreas.engel@ericsson.com>
+Date: Mon Sep 8 10:17:31 2008 +0200
+
+ Merged serial_pl010.c and serial_pl011.c.
+
+ They only differ in the init function.
+ This also adds the missing watchdog support for the PL011.
+
+ Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
+
+commit 0817d688f307ee2c0598e79175c94a40ce90337b
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Sun Sep 7 17:10:27 2008 -0400
+
+ Remove gap fill in srec object v2
+
+ SREC files do not need gap fill: The load address is specified in the
+ file. On the other hand, it can't be avoided in a .bin object. It has
+ no information about memory location.
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+
+commit 1dc306931ca5ce87f13916fa7165b052d3aa714f
+Author: Markus Heidelberg <markus.heidelberg@web.de>
+Date: Sun Sep 7 20:18:27 2008 +0200
+
+ README: fix missing subdirectory in the documentation
+
+ Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
+
+commit 3ef96ded38a8d33b58b9fab9cd879d51ddac4cbd
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Sun Sep 7 07:08:42 2008 +1000
+
+ Update i386 code (sc520_cdp)
+
+ Attempt to bring i386 / sc520 inline with master
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit 5608692104efa8d56df803dc79ea41ac3607eee5
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Thu Sep 4 13:01:49 2008 +0200
+
+ fw_env: add NAND support
+
+ Add support for environment in NAND with automatic NOR / NAND recognition,
+ including unaligned environment, bad-block skipping, redundant environment
+ copy.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit dd794323a2a1ed6a8a5df51785c31bcde60ad7ca
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 9 09:50:24 2008 +0200
+
+ ppc4xx: Fix out-of-tree building of CPCI405 variants
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 59f630588e3fdbd698a0a2798e52a8924e899563
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Fri Aug 15 15:42:11 2008 +0200
+
+ Removed hardcoded MxMR loop value from upmconfig() for MPC85xx.
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit e64987a892353f3d49eb242d997820ef8f538912
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Fri Aug 15 15:42:13 2008 +0200
+
+ 85xx: socrates: Enable Lime support.
+
+ This patch adds Lime GDC support together with support for the PWM
+ backlight control through the w83782d chip. The reset pin of the
+ latter is attached to GPIO, so we need to reset it in
+ early_board_init_r.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 3e79b588b5199f35016f178fc0d5d1266382097f
+Author: Detlev Zundel <dzu@denx.de>
+Date: Fri Aug 15 15:42:12 2008 +0200
+
+ 85xx: Socrates: Major code update.
+
+ - Update the local bus ranges in the FDT for Linux for the various
+ devices connected to the local bus via chip-select.
+
+ - Set the LCRR_DBYP bit in the LCRR for local bus frequencies
+ lower than 66 MHz and uses I/O accessor functions consequently.
+
+ - UPM data update.
+
+ - Update of default environment and configuration. Use I2C multibus
+ as we do have two I2C buses. Also enable sdram and ext2 commands.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit e8d18541c6ceab821f75faab031740b33fdbfa4b
+Author: Timur Tabi <timur@freescale.com>
+Date: Fri Jul 18 16:52:23 2008 +0200
+
+ Update Freescale 85xx boards to sys_eeprom.c
+
+ The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID
+ format, and so it obsoletes board/freescale/common/cds_eeprom.c. Freescale
+ 86xx boards already use sys_eeprom.c, so this patch migrates the remaining
+ Freescale 85xx boards to use it as well. cds_eeprom.c is deleted.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit aab2bf0202c86227e3dcc8a5b58946087ebcc1af
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 9 10:08:02 2008 +0200
+
+ lib_ppc/interrupts.c: make board_show_activity() a weak function
+
+ This allows to use show_activity() without having to
+ define an empty board_show_activity() function.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit fe876787f8743883ce58fed61525eaa2f34da4c5
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 9 10:06:44 2008 +0200
+
+ stxxtc: remove empty CONFIG_SHOW_ACTIVITY functions
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 965de106ba8900372c8b16dc60d5acab7f925e38
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 9 10:03:47 2008 +0200
+
+ NETTA2: remove empty CONFIG_SHOW_ACTIVITY functions
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6cc64f9b5f69239c8b1969572b5a3a4aab7de5b9
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Fri Aug 15 15:42:11 2008 +0200
+
+ Removed hardcoded MxMR loop value from upmconfig() for MPC85xx.
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit 36241ca29d4804a1006fb3f26069effda5202581
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Fri Aug 15 15:42:13 2008 +0200
+
+ 85xx: socrates: Enable Lime support.
+
+ This patch adds Lime GDC support together with support for the PWM
+ backlight control through the w83782d chip. The reset pin of the
+ latter is attached to GPIO, so we need to reset it in
+ early_board_init_r.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 7a47753ddcaebbf2142809842f70c5f723bd9ddb
+Author: Detlev Zundel <dzu@denx.de>
+Date: Fri Aug 15 15:42:12 2008 +0200
+
+ 85xx: Socrates: Major code update.
+
+ - Update the local bus ranges in the FDT for Linux for the various
+ devices connected to the local bus via chip-select.
+
+ - Set the LCRR_DBYP bit in the LCRR for local bus frequencies
+ lower than 66 MHz and uses I/O accessor functions consequently.
+
+ - UPM data update.
+
+ - Update of default environment and configuration. Use I2C multibus
+ as we do have two I2C buses. Also enable sdram and ext2 commands.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 4d2ae70e8c31c22e5710df5ff236b5565ea2cf2c
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Sep 9 01:22:39 2008 +0200
+
+ disk-on-chip: remove duplicate doc_probe declaration
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 3221b074a0ab199f6ae47c19cc22f42ddf3ef819
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Sep 9 00:59:40 2008 +0200
+
+ onenand_uboot: fix warning: 'struct mtd_oob_ops' declared inside parameter list
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 13b4db0e2107175a8622ebb48529fa3ad8e12c75
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Sep 9 00:59:39 2008 +0200
+
+ rs5c372: fix rtc_set prototype
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1bb8b2ef2722bbaea3cc5d46321ce1d99f9b56f7
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Thu Aug 14 14:08:28 2008 +0200
+
+ ARM: fix warning: target CPU does not support interworking
+
+ This patch fixes warnings like this:
+
+ start.S:0: warning: target CPU does not support interworking
+
+ which come from some ARM cross compilers and are caused by hard-coded
+ (with "--with-cpu=arm9" configuration option) ARM targets (which
+ support ARM Thumb instructions), while the ARM target selected from
+ the command line (with "-march=armv4") doesn't support Thumb
+ instructions.
+
+ This warning is issued by the compiler regardless of the real use of
+ the Thumb instructions in code.
+
+ To fix this problem, we use options according to compiler version
+ being used.
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4265c35fbcb248e58179007621d61d32d0b3b82a
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Thu Aug 14 14:08:28 2008 +0200
+
+ ARM: Use do_div() instead of division for "long long".
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8febd13c69cb68652577d1a9fcbde954bf784155
+Author: Timur Tabi <timur@freescale.com>
+Date: Fri Jul 18 16:52:23 2008 +0200
+
+ Update Freescale 85xx boards to sys_eeprom.c
+
+ The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID
+ format, and so it obsoletes board/freescale/common/cds_eeprom.c. Freescale
+ 86xx boards already use sys_eeprom.c, so this patch migrates the remaining
+ Freescale 85xx boards to use it as well. cds_eeprom.c is deleted.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit 1055171ed05b7c4885737463d52b8d6c013bcb5d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Sep 8 23:26:22 2008 +0200
+
+ lib_arm/bootm.c: fix compile warnings
+
+ bootm.c:128: warning: label 'error' defined but not used
+ bootm.c:65: warning: unused variable 'ret'
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2e3c867d0a63c563a51e65b776973b008f16cec5
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Sep 8 22:46:42 2008 +0200
+
+ ml507: fix out of tree build problem
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9863a15a98f23b79f34a0e4f9e465bc6df5d504d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Sep 8 22:10:28 2008 +0200
+
+ common/cmd_bootm.c: fix printf() format warnings
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4394f9a8c42bb1b0abc4fc04bd582d4db5f8b726
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Sep 8 22:37:45 2008 +0200
+
+ BMW, PCIPPC2, PCIPPC6, RBC82: fix compile warnings
+
+ missing doc_probe() prototype.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2c5e3cc4994897d364b148942ff23e47783198f6
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Sep 8 21:28:14 2008 +0200
+
+ mk48t59: fix compile problem introduced by commit d1e23194
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5ff889349d2ace13f10c9335e09365fcec8247cc
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Sep 8 14:11:12 2008 +0200
+
+ ppc4xx: Move ppc4xx specific prototypes to ppc4xx header
+
+ This patch moves some 4xx specific prototypes out of include common.h
+ to a ppc4xx specific header.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ac53ee8318678190bf3c68da477a84a657d86fb0
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Sep 5 15:34:04 2008 +0200
+
+ ppc4xx: Update CPCI405(AB) configuration
+
+ This patch add FDT support and command line editing capabilities
+ for CPCI405 and CPCI405AB boards.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7b1fbcadf73a83b3beb94abccda1c35e2c075a94
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Sep 5 15:34:03 2008 +0200
+
+ ppc4xx: Cleanup CPCI405 linker script
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 767f9159c5c94cd0cb3135b5b82814ad12816ddf
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Sep 5 15:34:02 2008 +0200
+
+ ppc4xx: Update CPCI405 variants handling
+
+ This patch replaces the BOARD_REVISION variable in include/config.mk
+ by a using a temporary include file in the platform directory.
+
+ The former way does not work anymore and the latter is also used by
+ some other boards.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f071f01fd09e9bf1cf09de37a7416aacce71bae1
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Sep 8 10:01:48 2008 +0200
+
+ ppc4xx: Remove CONFIG_CS8952_PHY define
+
+ Since this define is only used on one board that was never really in
+ production, removing this compile time option doesn't hurt and makes
+ the code more readable.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6ca8646c1860bba74326bf916a5a3389a5c0d3b5
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Sep 5 14:11:40 2008 +0200
+
+ ppc4xx: Fix compilation warning for PIP405
+
+ This patch fixes a compilation warning for the PIP405 board. It moves the
+ #ifndef CONFIG_CS8952_PHY define a little so that the warning doesn't
+ occur anymore. I am a little unsure if this #ifdef is at the correct
+ place now or if it could be removed completely. This needs to get
+ tested on the PIP405 board.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 725b53ac61f4df3026b8f6489ef0080fd27d3816
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Sep 5 14:09:09 2008 +0200
+
+ ppc4xx: Fix compilation warning for canyonlands & glacier
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 302e52e0b1d4c7f994991709d0cb6c3ea612cdb5
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Sep 5 14:40:29 2008 -0500
+
+ Fix compiler warning in mpc8xxx ddr code
+
+ ctrl_regs.c: In function 'compute_fsl_memctl_config_regs':
+ ctrl_regs.c:523: warning: 'caslat' may be used uninitialized in this function
+ ctrl_regs.c:523: note: 'caslat' was declared here
+
+ Add a warning in DDR1 case if cas_latency isn't a value we know about.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d1e2319414ea5218ba801163e4530ecf2dfcbf36
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Sep 1 23:06:23 2008 +0200
+
+ rtc: allow rtc_set to return an error and use it in cmd_date
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ee9536a28cb149bcb6c5dee9d08c62c91f4c72d2
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Sep 1 01:16:33 2008 +0200
+
+ ap325rxa/favr-32-ezkit: Use CONFIG_FLASH_CFI_DRIVER
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6b971c73f182248ce103503d74fbc0100bb8c8b7
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sun Aug 31 05:37:04 2008 +0900
+
+ config.mk: Move arch-specific condition to $(ARCH)_config.mk
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit ea86b9e64b811753d9eabe0f560ee189fbe5d0c1
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 29 19:08:29 2008 -0500
+
+ Prevent crash if random/invalid ramdisks are passed to bootm
+
+ Adds returning an error from the ramdisk detection code if
+ its not a real ramdisk (invalid). There is no reason we can't
+ just return back to the console if we detect an invalid
+ ramdisk or CRC error.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8e02494e8f86c8f2d7324b5eb9e75271104a01ef
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Fri Aug 29 21:04:45 2008 +0200
+
+ Prevent crash if random DTB address is passed to bootm
+
+ This patch adds bootm_start() return value check. If
+ error status is returned, we do not proceed further to
+ prevent board reset or crash as we still can recover
+ at this point.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit cc347801add2689b1ee54d21f62bc14ecf6e1dd8
+Author: Andrew Dyer <adyer@righthandtech.com>
+Date: Fri Aug 29 12:30:39 2008 -0500
+
+ clean up some #if !defined() in drivers/video/cfb_console.c
+
+ rearrange some #if !defined() / #else / #endif statements to remove
+ the negative logic.
+
+ Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
+
+commit c83f4c2d77f07174dcd6bef7e87a0f7017be7c33
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Fri Aug 29 09:02:20 2008 +0900
+
+ apollon: use the last memory area for u-boot
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit a6f2e455b774d0c5d56e44e5661df9adb69b6e07
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Aug 28 13:50:42 2008 +0200
+
+ TQM8272: move NAND part in seperate File
+
+ I didn't try to use drivers/mtd/nand/fsl_upm.c for the NAND driver,
+ because I have no longer access to the hardware.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 584f979f7ee914e32d408739cbdd2c4457ec18b8
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Aug 28 13:48:36 2008 +0200
+
+ TQM8272: Fix compiling error for the TQM8272 board.
+
+ Fix compile problems caused by
+ commit cfa460adfdefcc30d104e1a9ee44994ee349bb7b
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 1a7f8ccec981648ccd38fca2535490582eee08e6
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Wed Aug 27 14:45:20 2008 +0900
+
+ Add JFFS2 command support on OneNAND
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit f5c3ba79788b0e39baab7026d374fe375dd1a43f
+Author: Mark Jackson <mpfj@mimc.co.uk>
+Date: Mon Aug 25 19:21:30 2008 +0100
+
+ Allow console input to be disabled
+
+ Added new CONFIG_DISABLE_CONSOLE define and GD_FLG_DISABLE_CONSOLE.
+
+ When CONFIG_DISABLE_CONSOLE is defined, setting
+ GD_FLG_DISABLE_CONSOLE disables all console input and output.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+
+commit 2b22d608f370565c87f55928b524207031419c11
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Wed Jul 30 12:39:29 2008 +0200
+
+ loads: allow negative offsets
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+
+commit e90fb6afab2c0c074dfb67bacb4de179eb188a24
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Thu Sep 4 11:19:05 2008 +0200
+
+ USB EHCI: reset root hub
+
+ Some of multi-function USB controllers (e.g. ISP1562) allow root hub
+ resetting only via EHCI registers. So, this patch adds the
+ corresponding kind of reset to OHCI's hc_reset() if the newly
+ introduced CONFIG_PCI_EHCI_DEVNO option is set (e.g. for Socrates
+ board).
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+ Acked-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 5875d358f025c1b042d8a0f08384b756de7256c9
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Fri Aug 15 15:42:09 2008 +0200
+
+ RX 8025 RTC: analyze 12/24-hour mode flag in rtc_get().
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 3e3c026ed746a284c6f0ef139b26d859939de7e9
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Sep 5 10:47:46 2008 +0200
+
+ devices: Use list_add_tail() instead of list_add() to register a device
+
+ This patch fixes a problem spotted on Glacier/Canyonlands (and most
+ likely lots of other board ports), that no serial output was seen
+ after console initialization in console_init_r(). This is because the
+ last added console device was used instead of the first added.
+
+ This patch fixes this problem by using list_add_tail() instead of
+ list_add() to register a device. This way the first added console
+ is used again.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 78d78236896d62bb8ca7302af38d8f1493eb2651
+Author: Victor Gallardo <vgallardo@amcc.com>
+Date: Thu Sep 4 23:49:36 2008 -0700
+
+ ppc4xx: Add support for GPCS, SGMII and M88E1112 PHY
+
+ This patch adds GPCS, SGMII and M88E1112 PHY support
+ for the AMCC PPC460GT/EX processors.
+
+ Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f6b6c45840f9b4671d2d97243a12a1f3ffb64765
+Author: Adam Graham <agraham@amcc.com>
+Date: Wed Sep 3 12:26:59 2008 -0700
+
+ ppc4xx: Update Kilauea to use PPC4xx DDR autocalibration routines
+
+ Signed-off-by: Adam Graham <agraham@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 075d0b81e896e8735ae26372cd384f87cbd24e41
+Author: Adam Graham <agraham@amcc.com>
+Date: Wed Sep 3 12:26:28 2008 -0700
+
+ ppc4xx: IBM Memory Controller DDR autocalibration routines
+
+ Alternate SDRAM DDR autocalibration routine that can be generically used
+ for any PPC4xx chips that have the IBM SDRAM Controller core allowing for
+ support of more DIMM/memory chip vendors and gets the DDR autocalibration
+ values which give the best read latency performance (SDRAM0_RDCC.[RDSS]).
+
+ Two alternate SDRAM DDR autocalibration algoritm are provided in this patch,
+ "Method_A" and "Method_B". DDR autocalibration Method_A scans the full range
+ of possible PPC4xx SDRAM Controller DDR autocalibration values and takes a
+ lot longer to run than Method_B. Method_B executes in the same amount of time
+ as the currently existing DDR autocalibration routine, i.e. 1 second or so.
+ Normally Method_B is used and it is set as the default method.
+
+ The current U-Boot PPC4xx DDR autocalibration code calibrates the IBM SDRAM
+ Controller registers.[bit-field]:
+ 1) SDRAM0_RQDC.[RQFD]
+ 2) SDRAM0_RFDC.[RFFD]
+
+ This alternate PPC4xx DDR autocalibration code calibrates the following
+ IBM SDRAM Controller registers.[bit-field]:
+
+ 1) SDRAM0_WRDTR.[WDTR]
+ 2) SDRAM0_CLKTR.[CKTR]
+ 3) SDRAM0_RQDC.[RQFD]
+ 4) SDRAM0_RFDC.[RFFD]
+
+ and will also use the calibrated settings of the above four registers that
+ produce the best "Read Sample Cycle Select" value in the SDRAM0_RDCC.[RDSS]
+ register.[bit-field].
+
+ Signed-off-by: Adam Graham <agraham@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e07f4a8033b6270b8103049adb6456f660ff4a89
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Mon Sep 1 13:09:39 2008 -0400
+
+ ppc44x: Unification of virtex5 pp440 boards
+
+ This patch provides an unificated way of handling xilinx v5 ppc440 boards.
+
+ It unificates 3 different things:
+
+ 1) Source code
+ A new board called ppc440-generic has been created. This board includes
+ a generic tlb initialization (Maps the whole memory into virtual) and
+ defines board_pre_init, checkboard, initdram and get_sys_info weakly,
+ so, they can be replaced by specific functions.
+
+ If a new board needs to redefine any of the previous functions
+ (specific initialization) it can create a new directory with the
+ specific initializations needed. (see the example ml507 board).
+
+ 2) Configuration file
+ Common configurations are located under configs/xilinx-ppc440.h, this
+ header file interpretes the xparameters file generated by EDK and
+ configurates u-boot in correspondence. Example: if there is a Temac,
+ allows CMD_CONFIG_NET
+ Specific configuration are located under specific configuration file.
+ (see the example ml507 board)
+
+ 3) Makefile
+ Some work has been done in order to not duplicate work in the Main
+ Makefile. Please see the attached code.
+
+ In order to support new boards they can be implemented in the next way:
+
+ a) Simple Generic Board (90% of the time)
+ Using EDK generates a new xparameters.h file, replace
+ ppc440-generic/xparameters.h and run make xilinx-ppc440-generic_config
+ && make
+
+ b) Simple Boards with special u-boot parameters (9 % of the time)
+ Create a new file under configs for it (use ml507.h as example) and
+ change your paramaters. Create a new Makefile paragraph and compile
+
+ c) Complex boards (1% of the time)
+ Create a new folder for the board, like the ml507
+
+ Finally, it adds support for the Avnet FX30T Evaluation board, following
+ the new generic structure:
+
+ Cheap board by Avnet for evaluating the Virtex5 FX technology.
+
+ This patch adds support for:
+ - UartLite
+ - 16MB Flash
+ - 64MB RAM
+
+ Prior using U-boot in this board, read carefully the ERRATA by Avnet
+ to solve some memory initialization issues.
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 64ac1eb5afafced49b327425ad1814b2dc422d6e
+Author: Nick Spence <nick.spence@freescale.com>
+Date: Tue Sep 2 15:21:16 2008 -0500
+
+ mpc83xx: fix mpc8313 in-tree building with NAND
+
+ and add mpc8313 NAND build to MAKEALL
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 6eb2a44e27919fdc601e0c05404b298a7602c0e3
+Author: Nick Spence <nick.spence@freescale.com>
+Date: Thu Aug 28 14:09:25 2008 -0700
+
+ mpc83xx: clean up cache operations and unlock_ram_in_cache() functions
+
+ Cleans up some latent issues with the data cache control so that
+ dcache_enable() and dcache_disable() will work reliably (after
+ unlock_ram_in_cache() has been called)
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 46497056ae3b1e81e736e9cf3a170472c5d9719f
+Author: Nick Spence <nick.spence@freescale.com>
+Date: Thu Aug 28 14:09:19 2008 -0700
+
+ mpc83xx: Store and display Arbiter Event Register values
+
+ Record the Arbiter Event Register values and optionally display them.
+
+ The Arbiter Event Register can record the type and effective address of
+ an arbiter error, even through an HRESET. This patch stores the values in
+ the global data structure.
+
+ Display of the Arbiter Event registers immediately after the RSR value
+ can be enabled with defines. The Arbiter values will only be displayed
+ if an arbiter event has occured since the last Power On Reset, and either
+ of the following defines exist:
+ #define CONFIG_DISPLAY_AER_BRIEF - display only the arbiter address and
+ and type register values
+ #define CONFIG_DISPLAY_AER_FULL - display and interpret the arbiter
+ event register values
+
+ Address Only transactions are one of the trapped events that can register
+ as an arbiter event. They occur with some cache manipulation instructions
+ if the HID0_ABE (Address Broadcast Enable) is set and the memory region
+ has the MEMORY_COHERENCE WIMG bit set. Setting:
+ #define CONFIG_MASK_AER_AO - prevents the arbiter from recording address
+ only events, so that it can still capture
+ other real problems.
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit ade50c7fa1b16ef98be17e9c3ae286aecf4f5605
+Author: Nick Spence <nick.spence@freescale.com>
+Date: Thu Aug 28 14:09:11 2008 -0700
+
+ mpc83xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
+
+ This is needed in unlock_ram_in_cache() because it is called from C and
+ will corrupt the small data area anchor that is kept in R2.
+
+ lock_ram_in_cache() is modified similarly as good coding practice, but
+ is not called from C.
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit d9fe88173cb4f7d293796ffe10c7a0d3d426d8f9
+Author: Nick Spence <nick.spence@freescale.com>
+Date: Fri Aug 22 23:52:50 2008 -0700
+
+ MPC83XX: Fix GPIO configuration - set gpio level before direction
+
+ Set DAT value before DIR values to avoid creating glitches on the
+ GPIO signals.
+
+ Set gpio level register before direction register to inhibit
+ glitches on high level output pins.
+
+ Dir and data gets cleared at powerup, so high level output lines see
+ a short low pulse between setting the direction and level registers.
+
+ Issue was seen on a new board with the nReset line of the NOR flash
+ connected to a GPIO. Setting the direction register puts the NOR flash
+ in reset so the next instruction to set the level cannot get executed.
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+ Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 7007c5975ee900ad70983b0681d3251e221f8321
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Sep 2 02:58:32 2008 +0200
+
+ doc/qemu_mips: add doc howto debug u-boot with gdb
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7deb3b3ecd0e81ef09bb68aa0ec2346f4ae0a405
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Wed Sep 3 17:15:45 2008 +0200
+
+ ppx4xx: Fix broken DASA_SIM board
+
+ This patch adds initdram() to DASA_SIM boards that has been
+ removed accidentally by a previous commit.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7e410aa30fbcb1d19a26bbf1e84a9ca6102d534b
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Sep 1 08:35:37 2008 +0200
+
+ ppc4xx: Remove reference to common/lists.o from some esd linker scripts
+
+ This patch removes some direct references to common/lists.o from some
+ esd linker scripts. This is necessary because the lists source was moved
+ and is not in the "common" directory anymore.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 97b0734d65f8a0b03df0a335a2addc759da56107
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 2 16:33:05 2008 +0200
+
+ ppc4xx: Remove obsolete or unused functions from some esd boards
+
+ This patch removes initdram() and testdram() from most esd 405 platforms.
+ Some boards also have an empty dummy implementation of
+ misc_init_f(). This is also removed.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1092ce218c514e5ccb18450ac5af501d96d6e3e9
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 2 15:07:54 2008 +0200
+
+ ppc4xx: Update VOM405 board configuration
+
+ - remove PCI code
+ - add command line editing
+ - minor cleanup
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 830c800e28e96ec7c3c6936a0bd1b9461f3e77d4
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 2 15:07:53 2008 +0200
+
+ ppc4xx: Remove obsolete initdram() function from VOM405 board
+
+ This patch removed the obsolete initdram() function from
+ VOM405 platform file.
+
+ Some minor cleanup.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3d4dd7a941b2327b8c2fc535b782ca307ff8b6c8
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 2 15:07:52 2008 +0200
+
+ ppc4xx: Cleanup VOM405 linker script
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit fcaffd597f6f5191b12ca66c2a4789bbdeea85c2
+Author: Matthias Fuchs <mf@esd.eu>
+Date: Tue Sep 2 15:07:51 2008 +0200
+
+ ppc4xx: Add fdt support for VOM405 boards
+
+ Signed-off-by: Matthias Fuchs <mf@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9ec367aa2c5dcf79558aa2b209b45d7686654c14
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 2 11:36:14 2008 +0200
+
+ ppc4xx: Coding style cleanup
+
+ Wrap long lines etc.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 17e65c21adfb63980e6aff80bfbd2df0eeb12060
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 2 11:35:56 2008 +0200
+
+ ppc4xx: Enable USB on PLU405 boards
+
+ This patch enables the PCI-OHCI controller on PLU405 board.
+
+ Also the default CPU frequency is updated to 266 MHz and
+ command line editing is enabled.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 40e43e3b87d57b2ac786e27f6e25a7df9940d93b
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 2 11:35:35 2008 +0200
+
+ ppc4xx: Cleanup PLU405 platform file
+
+ This patch
+ - wraps some long lines
+ - removes unused/obsolete functions: misc_init_f() and initdram()
+
+ Signed-off-by: Matthias Fuchs <mf@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d74cdb1d0614ab78128e0735a51e7988a7b7ea33
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 2 11:35:04 2008 +0200
+
+ ppc4xx: Cleanup PLU405 linker script
+
+ Signed-off-by: Matthias Fuchs <mf@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3bc1054cec2f6b25822f301ea922a16233baa4c7
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 2 11:34:36 2008 +0200
+
+ ppc4xx: Add fdt support for PLU405 boards
+
+ Signed-off-by: Matthias Fuchs <mf@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5a3e480b783bfbc139586293a54fb875d7c5c5d4
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Tue Sep 2 11:34:08 2008 +0200
+
+ ppc4xx: Increase U-Boot size to 384kB for PLU405 boards
+
+ Signed-off-by: Matthias Fuchs <mf@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit be1b0d2777e179191a57b138b660547a17e55aad
+Author: Jochen Friedrich <jochen@scram.de>
+Date: Tue Sep 2 11:24:59 2008 +0200
+
+ Don't tftp to unknown flash
+
+ If a board has a variable number of flash banks, there are empty entries
+ in flash_info[] and CFG_DIRECT_FLASH_TFTP is set, tftp boot fails with
+ "Outside available Flash". This patch skips flash banks with unknown
+ flash ids.
+
+ Signed-off-by: Jochen Friedrich <jochen@scram.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 33314470ab32a3f5412bb61b5f3d6c216c88bf9b
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Aug 28 13:40:44 2008 +0900
+
+ net: smc911x: Add pkt_data_pull and pkt_data_push function
+
+ The RSK7203 board has the SMSC9118 wired up 'incorrectly'.
+ Byte-swapping is necessary, and so poor performance is inevitable.
+ This problem cannot evade by the swap function of CHIP, this can
+ evade by software Byte-swapping.
+ And this has problem by FIFO access only. pkt_data_pull/pkt_data_push
+ functions necessary to solve this problem.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 10efa024b8ffd9e6aaca63da8bddfdffdc672274
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 20:37:00 2008 -0700
+
+ Moved initialization of EEPRO100 Ethernet controller to board_eth_init()
+
+ Affected boards:
+ db64360
+ db64460
+ katmai
+ taihu
+ taishan
+ yucca
+ cpc45
+ cpu87
+ eXalion
+ elppc
+ debris
+ kvme080
+ mpc8315erdb
+ integratorap
+ ixdp425
+ oxc
+ pm826
+ pm828
+ pm854
+ pm856
+ ppmc7xx
+ sc3
+ sc520_spunk
+ sorcery
+ tqm8272
+ tqm85xx
+ utx8245
+
+ Removed initialization of the driver from net/eth.c
+ Also, wrapped contents of pci_eth_init() by CONFIG_PCI.
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 8ca0b3f99c4fce7a599dcaf92ae095496dc8c8e0
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:45:44 2008 -0700
+
+ Moved initialization of TULIP Ethernet controller to board_eth_init()
+
+ Affected boards:
+ cu824
+ bab7xx
+ adciop
+ dasa_sim
+ mousse
+ mpc8540eval
+ musenki
+ mvblue
+ pcippc2/pcippc6
+ sbc8240
+ stxssa
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit ad3381cf4167120db5c7b88e4970245e1d5c0a32
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:44:19 2008 -0700
+
+ Moved initialization of E1000 Ethernet controller to board_eth_init()
+
+ Affected boards:
+ ap1000
+ mvbc_p
+ PM854
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 4fce2aceaf8afd31a252bc782c9dbc497bf40487
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:40:51 2008 -0700
+
+ Moved initialization of plb2800 Ethernet driver to board_eth_init
+
+ Affected boards:
+ purple
+
+ Removed initialization of controller from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit e1d7480b5de1fd4830bf7cf5e2237d3b0846d08d
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:39:12 2008 -0700
+
+ Moved initialization of MPC5xxx_FEC Ethernet driver to CPU directory
+
+ Modified board_eth_init() functions of boards that have this FEC in addition
+ to other Ethernet controllers.
+
+ Affected boards:
+ bc3450
+ icecube
+ mvbc_p
+ o2dnt
+ pm520
+ total5200
+ tq5200
+
+ Removed initialization of controller from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit a0aad08f9427ac00218bdb2cb649833ce6ec9b8d
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:36:38 2008 -0700
+
+ Moved initialization of MPC512x_FEC Ethernet driver to CPU directory
+
+ Added a cpu_eth_init() function to MPC512x CPU directory and
+ removed code from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 8218bd2aa68820b878a8413493ae17fd8d21f944
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:16:59 2008 -0700
+
+ Moved initialization of IncaIP Ethernet controller to board_eth_init
+
+ Affected boards:
+ IncaIP
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 164846eeb25cb2a5ede7ab9371fdca7f4831a055
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:15:26 2008 -0700
+
+ Moved initialization of 3COM Ethernet controller (AmigaOne) to board_eth_init()
+
+ Affected boards:
+ AmigaOneG3SE
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 6aca145e067efe75398e9fac97822bd3700de0b2
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:13:34 2008 -0700
+
+ Moved initialization of GT6426x Ethernet controller to board_eth_init()
+
+ Affected boards:
+ EVB64260
+ P3G4
+ ZUMA
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit e3090534d62045dcb73f5392bacc64a4e8e443dc
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:08:43 2008 -0700
+
+ Moved initialization of PCNET Ethernet controller to board_eth_init()
+
+ Affected boards:
+ PN62
+ sc520_cdp
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit b902b8dda5e1fd4d5fe2f202c71ee3521d2c40ed
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:07:16 2008 -0700
+
+ Moved initialization of NATSEMI Ethernet controller to board_eth_init()
+
+ Affected boards:
+ a3000
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 19403633dd70333893c2da7926a1d0dcd6dab7d8
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 10:03:22 2008 -0700
+
+ Moved initialization of NS8382X Ethernet controller to board_eth_init()
+
+ Affected boards:
+ bc3450
+ cpci5200
+ mecp5200
+ pf2000
+ icecube
+ o2dnt
+ pm520
+ sandpoint8245
+ total5200
+ tqm5200
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit ccdd12f83ef93719fbe85f642aa4dc648b9498f0
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 09:59:33 2008 -0700
+
+ Moved initialization of TSI108 Ethernet controller to board_eth_init()
+
+ Affected boards:
+ mpc7448hpc2
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 0b252f50ae218ae15bfb63af44227972686ebc56
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 21:41:08 2008 -0700
+
+ Moved initialization of RTL8139 Ethernet controller to board_eth_init()
+
+ Affected boards:
+ hidden_dragon
+ MPC8544DS
+ MPC8610HPCN
+ R2DPLUS
+ TB0229
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 02d69891d95ee76b0e86e1715a4dc0b964a57cb7
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 09:49:42 2008 -0700
+
+ Moved initialization of RTL8169 Ethernet controller to board_eth_init()
+
+ Affected boards:
+ linkstation
+ r7780mp
+
+ Removed initialization of the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3ae071e44256144d6c1e3febb65f6c56bd433769
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Tue Aug 12 22:11:53 2008 -0700
+
+ Moved initialization of Ethernet controllers on Atmel AT91 to board_eth_init()
+
+ Removed at91sam9_eth_initialize() from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 89973f8a82c28ad893c4c3cc56839a8e10fe5f13
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Aug 31 22:22:04 2008 -0700
+
+ Introduce netdev.h header file and remove externs
+
+ This addresses all drivers whose initializers have already
+ been moved to board_eth_init()/cpu_eth_init().
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 5a8a163ac394d9f4f7ff57f415d82bd673b0068c
+Author: Andy Fleming <afleming@freescale.com>
+Date: Sun Aug 31 16:33:30 2008 -0500
+
+ Add pixis_set_sgmii command
+
+ The 8544DS and 8572DS platforms support an optional SGMII riser card to
+ expose ethernet over an SGMII interface. Once the card is in, it is also
+ necessary to configure the board such that it uses the card, rather than
+ the on-board ethernet ports. This can either be done by flipping dip switches
+ on the motherboard, or by modifying registers in the pixis. Either way
+ requires a reboot.
+
+ This adds a command to allow users to choose which ports are routed through
+ the SGMII card, and which through the onboard ports. It also allows users
+ to revert to the current switch settings.
+
+ This code does not work on the 8572, as the PIXIS is different.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 216f2a7156a5fde7b47adc40ad553c888a9cbaa7
+Author: Andy Fleming <afleming@freescale.com>
+Date: Sun Aug 31 16:33:29 2008 -0500
+
+ Add SGMII support for the 8544 DS
+
+ The 8544 DS has an optional SGMII Riser card, which uses different PHY
+ addresses. Check if we are in SGMII mode, and invoke the SGMII Riser
+ setup code if so.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 652f7c2eef76a1340928bd660845441e932d86a2
+Author: Andy Fleming <afleming@freescale.com>
+Date: Sun Aug 31 16:33:28 2008 -0500
+
+ Add support for Freescale SGMII Riser Card
+
+ The 8544DS and 8572DS systems have an optional SGMII riser card which
+ exposes new ethernet ports which are connected to the eTSECs via an
+ SGMII interface. The SGMII PHYs for this board are offset from the standard
+ PHY addresses, so this code modifies the passed in tsec_info structure to
+ use the SGMII PHYs on the card, instead.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 2abe361c03b43e6dcf68f54e96b5c05156c49284
+Author: Andy Fleming <afleming@freescale.com>
+Date: Sun Aug 31 16:33:27 2008 -0500
+
+ Add SGMII support to the tsec
+
+ Adds support for configuring the TBI to talk properly with the SerDes.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 75b9d4ae0d69f214eab641caf12ce8af83a39a42
+Author: Andy Fleming <afleming@freescale.com>
+Date: Sun Aug 31 16:33:26 2008 -0500
+
+ Pass in tsec_info struct through tsec_initialize
+
+ The tsec driver contains a hard-coded array of configuration information
+ for the tsec ethernet controllers. We create a default function that works
+ for most tsecs, and allow that to be overridden by board code. It creates
+ an array of tsec_info structures, which are then parsed by the corresponding
+ driver instance to determine configuration. Also, add regs, miiregs, and
+ devname fields to the tsec_info structure, so that we don't need the kludgy
+ "index" parameter.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit dd3d1f56a01f460d560766126ee7dfed2ea9bc10
+Author: Andy Fleming <afleming@freescale.com>
+Date: Sun Aug 31 16:33:25 2008 -0500
+
+ tsec: Move tsec.h to include/
+
+ This is to prepare the way for board code passing in the tsec_info structure
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d23dc394aa69093b6326ad917db04dc0d1aff3f8
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Fri Jun 6 15:52:44 2008 +0200
+
+ PHY: Add support for the M88E1121R Marvell chip.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 1711f3bd16d1c5e9d17b4c0198b426d86999781b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Sep 2 21:17:36 2008 +0200
+
+ fw_env.c: fix build problems with MTD_VERSION=old
+
+ (as needed to support old 2.4 Linux kernel based releases)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 628ffd73bcff0c9f3bc5a8eeb2c7455fe9d28a51
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Sep 1 17:11:26 2008 +0200
+
+ device: make device_register() clone the device
+
+ This is expected by the callers, but this fact was hidden well within
+ the old list implementation.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit baf449fc5ff96f071bb0e3789fd3265f6d4fd9a0
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Mon Sep 1 14:00:07 2008 +0200
+
+ avr32: Add support for "GPIO" port mux
+
+ The "GPIO" port mux is used on AVR32 UC3 parts as well as AT32AP7200 and
+ all later AVR32 chips. This patch adds a driver for it, implementing the
+ same API as the existing portmux-pio driver but with more functionality.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit d92852579546c46bdaac978e0b6767a6645b69e0
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Fri Aug 15 15:02:29 2008 +0200
+
+ atstk1000: Convert to new-style makefile
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 25e6854d42c11046a468576179b5494f850311b2
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Sun Aug 31 18:46:35 2008 +0200
+
+ avr32: use board_early_init_r instead of board_init_info
+
+ Replace the avr32-specific board_init_info hook by the standard
+ board_early_init_r hook and make it optional.
+
+ board_early_init_r() runs somewhat earlier than board_init_info used to
+ do, but this isn't a problem for any of the in-tree boards.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 36d375faf5cff98e8dca32aabbbb1ec6036437dd
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Sun Aug 31 18:24:24 2008 +0200
+
+ avr32: Use board_postclk_init instead of gclk_init
+
+ Replace the avr32-specific gclk_init() board hook with the standard
+ board_postclk_init() hook which is supposed to run at the same point
+ during initialization.
+
+ Provide a dummy weak alias for boards not implementing this hook. The
+ cost of this is:
+ - 2 bytes for the dummy function (retal 0)
+ - 2 bytes for each unnecessary function call (short rcall)
+
+ which is a pretty small price to pay for avoiding lots of #ifdef
+ clutter. In this particular case, all boards probably end up slightly
+ smaller because we avoid the conditional checking if the gclk_init
+ symbol is NULL.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit abdde2b1d570b1ee77606bf783444fcddf7f0965
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Sun Aug 31 18:07:35 2008 +0200
+
+ hammerhead: Use gclk helper functions
+
+ Use the new gclk helper functions to set up the PHY clock instead of
+ accessing the PM registers directly.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 98090cd75cdb40b2ab94c806c338540a5716748b
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Sun Aug 31 18:05:32 2008 +0200
+
+ avr32: Add gclk helper functions
+
+ Add two helper functions for configuring and enabling generic clocks:
+ - gclk_enable_output: Enables output on a GCLKx pin
+ - gclk_set_rate: Configures a gclk to run at a specific rate
+
+ This should eliminate any reason to go mucking about with PM registers
+ from board code.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit ab0df36fc7db9dda0b786b909f653e279dfeb9cf
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Fri Aug 29 21:09:49 2008 +0200
+
+ avr32: refactor the portmux/gpio code
+
+ - Separate the portmux configuration functionality from the GPIO pin
+ control API.
+ - Separate the controller-specific code from the chip-specific code.
+ - Allow "ganged" port configuration (multiple pins at once).
+ - Add more flexibility to the "canned" peripheral select functions:
+ - Allow using more than 23 address bits, more chip selects, as
+ well as NAND- and CF-specific pins.
+ - Make the MACB SPEED pin optional, and choose between MII/RMII
+ using a parameter instead of an #ifdef.
+ - Make it possible to use other MMC slots than slot 0, and support
+ different MMC/SDCard data bus widths.
+ - Use more reasonable pull-up defaults; floating pins may consume a
+ lot of power.
+ - Get rid of some custom portmux code from the mimc200 board code. The
+ old gpio/portmux API couldn't really handle its requirements, but
+ the new one can.
+ - Add documentation.
+
+ The end result is slightly smaller code for all boards. Which isn't
+ really the point, but at least it isn't any larger.
+
+ This has been verified on ATSTK1002 and ATNGW100. I'd appreciate if
+ the board maintainers could help me test this on their boards. In
+ particular, the mimc200 port has lost a lot of code, so I'm hoping Mark
+ can help me out.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+ Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
+ Cc: Mark Jackson <mpfj@mimc.co.uk>
+ Cc: Alex Raimondi <alex.raimondi@miromico.ch>
+ Cc: Julien May <julien.may@miromico.ch>
+
+ Changes since v1:
+ * Enable pullup on NWAIT
+ * Add missing include to portmux-pio.h
+ * Rename CONFIG_PIO2 -> CONFIG_PORTMUX_PIO to match docs
+
+commit 4c24e8288c601cb773ab02528b48a8577970e867
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Sat Aug 30 17:28:36 2008 +0200
+
+ avr32: data_bits should reflect the actual number of data bits
+
+ Make the data_bits enum in struct sdram_config reflect the actual number
+ of data bits on the bus, i.e. 16 or 32. Having 0 mean 16 bits and 1 mean
+ 32 bits is just too confusing.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 66b7bc5175325809718d8d49ef073bc1036ad71b
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Fri Aug 29 17:48:18 2008 +0200
+
+ avr32: Update README
+
+ Remove some outdated and/or unnecessary information, and add updated
+ information about the toolchain and buildroot.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit c75e772a2f061a508bba28ded1b5bea91f0442b0
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Aug 31 23:28:15 2008 +0900
+
+ sh: Remove CC line from board's Makefile
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 468eae0660de6fdfd9999944c536ecc4797bd944
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Aug 31 23:25:57 2008 +0900
+
+ sh: Replaced "@./mkconfig" for @$(MKCONFIG)
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 3aeb1ff7482a732503186c742d3a5ded4b7a0d34
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Aug 28 14:50:52 2008 +0900
+
+ sh: Add support sh2 to MAKEALL
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6f3d8bb5faa12dbf3031382286784c978df038ee
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Aug 28 14:52:23 2008 +0900
+
+ sh: Fix compile error rsk7203 board
+
+ This boards used old type preprocessor.
+ This patch fix compile error.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 1c98172e025018552e9bb4c43b0aaee76f79b1aa
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Aug 28 14:53:31 2008 +0900
+
+ sh: Fix compile error sh7785lcr board
+
+ This boards used old type preprocessor.
+ This patch fix compile error.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6f0da4972e48f99d37bc522814940a6022cd3084
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Fri Aug 22 17:39:09 2008 +0900
+
+ sh: Renesas Solutions AP325RXA board support
+
+ AP325RXA is SH7723's reference board.
+ This has SCIF, NOR Flash, Ethernet, USB host, LCDC, SD Host, Camera and other.
+ In this patch, support SCIF, NOR Flash, and Ethernet.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit ab09f433b50bb83b5e440c335bc3839ee069e534
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Fri Aug 22 17:48:51 2008 +0900
+
+ sh: add support Renesas SH7723
+
+ Renesas SH7723 has 5 SCIF, SD, Camera, LCDC and other.
+ This patch supports CPU register's header file and SCIF serial driver.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c655fad06ba3fb042dbc667724a40e1a9a091248
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Aug 31 23:02:04 2008 +0900
+
+ sh: Renesas RSK+ 7203 board support
+
+ This adds initial support for the RTE RSK+ SH7203 board.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6ede753ddf52a7b0f992d9bccbe5e4a0968ca475
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Jul 3 23:11:02 2008 +0900
+
+ sh: Add support Renesas SH7203 processor
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6ad43d0dd86b612895ddc7f480eb6cdfe793adf9
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Aug 31 22:48:33 2008 +0900
+
+ sh: Add support SH2/SH2A which is CPU of Renesas Technology
+
+ Add support SH2/SH2A basic function.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 0d53a47dc0737b6aa3a39caee21410c169441ae5
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Aug 31 22:45:08 2008 +0900
+
+ sh: Renesas R0P7785LC0011RL board support
+
+ This board has SH7785, 512MB DDR2-SDRAM, NOR Flash,
+ Graphic, Ethernet, USB, SD, RTC, and I2C controller.
+
+ This patch supports the following functions:
+ - 128MB DDR2-SDRAM (29-bit address mode only)
+ - NOR Flash
+ - USB host
+ - Ethernet
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit b0b6218929bc7de9a6bdb8e564fa8ec2efa71b4e
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Thu Jul 10 19:32:53 2008 +0900
+
+ sh: add support for SH7785
+
+ Renesas SH7785 has DDR2-SDRAM controller, PCI, and other.
+ This patch supports CPU register's header file.
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit d6e04258be8f2408845468d3cf722a4cf0433445
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Aug 31 04:45:42 2008 +0200
+
+ davinci: fix remaining dm644x_eth
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 08ab4e1780fa63c88dd5a5ab52f4ff4ed1ee1878
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Aug 31 04:24:56 2008 +0200
+
+ fs: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c1de7a6daf9c657484e1c6d433f01fccd49a7f48
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Aug 31 04:24:55 2008 +0200
+
+ devices: merge to list_head
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ef0255fc75f28655f9681422079287d68a14dbaa
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Aug 31 04:24:51 2008 +0200
+
+ update linux/list
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 71cb31227bee741b274f6c0279b2aac1ab8e28e3
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Aug 31 00:39:48 2008 +0200
+
+ smdk6400: add gitignore
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f9f692e2b146d4e306b777e6d5f69f1d725b9eb9
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Aug 31 00:39:48 2008 +0200
+
+ smdk6400: Use CONFIG_FLASH_CFI_DRIVER
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7c0e5a8db3d1358b0ce3cc85ada0de6341ca4a15
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Sun Aug 31 00:39:47 2008 +0200
+
+ smdk6400: remove redundant bootargs definition
+
+ Double bootargs setting leads to a duplicated environmant entry.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 11edcfe260f20dcea79284a3e95270989d433854
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Sun Aug 31 00:39:47 2008 +0200
+
+ ARM: Add support for S3C6400 based SMDK6400 board
+
+ SMDK6400 can only boot U-Boot from NAND-flash. This patch adds a nand_spl
+ driver for it too. The board can also boot from the NOR flash, but due to
+ hardware limitations it can only address 64KiB on it, which is not enough
+ for U-Boot. Based on the original sources by Samsung for U-Boot 1.1.6.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit e0056b341069796eaea11eae0fc8eb93a3dceaac
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Sun Aug 31 00:39:47 2008 +0200
+
+ NAND: add NAND driver for S3C64XX
+
+ Based on the original S3C64XX NAND driver by Samsung for U-Boot 1.1.6.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 3fe7b589f9c7463df39056f8872006a67f56a91c
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Sun Aug 31 00:39:47 2008 +0200
+
+ S3C64XX: remove broken HWFLOW support from the serial driver
+
+ As noted by Harald Welte, HWFLOW support in the S3C64XX serial driver is
+ broken and currently unused. Remove it.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 2fb28dcf82048045e1bf5014e938e486fa6c2383
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Sun Aug 31 00:39:47 2008 +0200
+
+ serial: add S3C64XX serial driver
+
+ Based on the original S3C64XX UART driver by Samsung for U-Boot 1.1.6.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 8262813ca04fc57f5d8856e1828085c136e0f1eb
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Sun Aug 31 00:39:46 2008 +0200
+
+ USB: Add support for OHCI controller on S3C6400
+
+ Notice: USB on S3C6400 currently works _only_ with switched off MMU. One could
+ try to enable the MMU, but map addresses 1-to-1, and disable data cache, then
+ it should work too and we could still profit from instruction cache.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 9b07773f8883665b002500c190507e9fd99b7181
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Sun Aug 31 00:39:46 2008 +0200
+
+ ARM: Add arm1176 core with S3C6400 SoC
+
+ Based on the original S3C64XX port by Samsung for U-Boot 1.1.6.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit fcaac589a68115819ddadcf5c18ded9a5f9e2c75
+Author: Sandeep Paulraj <s-paulraj@ti.com>
+Date: Sun Aug 31 00:39:46 2008 +0200
+
+ ARM DaVinci: Changing function names for EMAC driver
+
+ DM644x is just one of a series of DaVinci chips that use the EMAC driver.
+ By replacing all the function names that start with dm644x_* to davinci_*
+ we make these function more portable. I have tested this change on my EVM.
+ DM6467 is another DaVinci SOC which uses the EMAC driver and i will
+ be sending patches that add DaVinci DM6467 support to the list soon.
+
+ Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
+
+commit fbbb1de369ca7d5ace6f7b0ce9d0aee24a6f457b
+Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
+Date: Sat Aug 30 23:21:30 2008 +0200
+
+ Integrator[AP/CP] - Remove unused file memsetup.S
+
+ - memsetup.s is changed/merged to lowlevel_init.S
+ memsetup.S has a global label memsetup that just returns back to caller
+ - memsetup global label is changed/merged to lowlevel_init
+ This label is not called from anywhere.
+
+ Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
+
+commit 89d51d022a63be1a851eda983c8cbce1a044f65f
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Wed Aug 27 21:35:52 2008 +0200
+
+ ARM DaVinci: Standardize names of directories/files
+
+ ARM DaVinci: Standardize names of directories/files.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 264bbdd11d01f14f5ea4629556ae63b00b13402d
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Fri Jul 11 15:10:13 2008 -0400
+
+ ARM DaVinci: Move common functions to board/davinci/common
+
+ ARM DaVinci: Move common functions to board/davinci/common.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit c2b4b2e4814f4ace9015fdb64132894327400bf0
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Aug 29 11:56:49 2008 +0200
+
+ ppc4xx/NAND: Add select_chip function to 4xx NDFC driver
+
+ This function is needed for the new NAND infrastructure. We only need
+ a dummy implementation though for the NDFC.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3d4a746e2fb4545f07d871049805fb34ae97cc94
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Aug 29 12:06:27 2008 +0200
+
+ ppc4xx: Increase image size for NAND boot target
+
+ This is needed since now with HUSH enabled (amcc-common.h) the image
+ read from NAND exceeds the previous limit.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6b5049d056cd8ef72d1f2f461ceb2d033d93f759
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Thu Aug 28 23:58:30 2008 -0700
+
+ Move MPC512x_FEC driver to drivers/net
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 80b00af01b3c9154774de2936f05a051e92f6a03
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Thu Aug 28 23:58:29 2008 -0700
+
+ Move MPC5xxx_FEC driver to drivers/net
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3de7bf0e6b1ad2608014096c8192f13229b2e9d7
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Aug 29 21:53:57 2008 +0200
+
+ cmd_terminal: remove no need ifdef
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 578118bdf122877ae769776be002255be447b4fa
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Aug 29 21:53:57 2008 +0200
+
+ common/Makefile: order by functionality
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ba7b5b2348b684cf8ec424b2e38e267dc1cfd2fb
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Aug 29 21:53:56 2008 +0200
+
+ miiphyutil: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 81789c39db3f0f6b621df8c0ec66014d701f368e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Aug 29 21:53:37 2008 +0200
+
+ autoscript: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit bbf52df9aa94ffb115b8b1ebeb00d01374bb0a1d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Aug 29 01:18:11 2008 +0200
+
+ crc16: move to lib_generic
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 55195773eacefb22dd483a3c560ea30a14263ce1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Aug 29 01:18:01 2008 +0200
+
+ miiphybb: move to drivers/net/phy
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e8314035996a9118ac5948df2ff8a2f2161ed67a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Aug 28 12:31:51 2008 +0200
+
+ soft_spi: move to drivers/spi
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 4d75e0aa9caca64d4a1d55d95cd1ca5f30d9fc56
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Aug 28 12:31:51 2008 +0200
+
+ soft_i2c: move to drivers/i2c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 717a222229fdb77703e9174d0eb08a4b41febf49
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Aug 28 12:31:48 2008 +0200
+
+ gunzip: move to lib_generic
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 52aef8f9ba28b747973bf76741c23db658d5773c
+Author: Wolfgang Ocker <weo@reccoware.de>
+Date: Tue Aug 26 19:55:23 2008 +0200
+
+ ppc4xx: NAND configuration
+
+ Made NAND bank configuration setting a config variable.
+
+ Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5bc542a593abc9e974fbd34704af85c37c366c60
+Author: Victor Gallardo <vgallardo@amcc.com>
+Date: Thu Aug 28 16:03:28 2008 -0700
+
+ ppc4xx: fix UIC external_interrupt hang on UIC0
+
+ This patch fixes a UIC external_interrupt hang if critical or non-critical
+ interrupt is set at the same time as a normal interrupt is set on UIC0.
+
+ Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 04737d5ffd16248cb80ab3dd4f3765057a803f18
+Author: Prodyut Hazarika <phazarika@amcc.com>
+Date: Wed Aug 27 16:39:00 2008 -0700
+
+ ppc4xx: Optimizations/Cleanups for IBM DDR2 Memory Controller
+
+ Removed Magic numbers from Initialization preload registers
+ Tested with Kilauea, Glacier, Canyonlands and Katmai boards
+ About 5-7% improvement seen for LMBench memtests
+
+ Signed-off-by: Prodyut Hazarika <phazarika@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8a490422bed685c9491274ec997f62061d88620b
+Author: John Rigby <jrigby@freescale.com>
+Date: Thu Aug 28 13:17:07 2008 -0600
+
+ ADS5121: Fix NOR and CPLD ALE timing for rev 2 silicon
+
+ MPC5121 rev 2 silicon has a new register for controlling how long
+ CS is asserted after deassertion of ALE in multiplexed mode.
+
+ The default is to assert CS together with ALE. The alternative
+ is to assert CS (ALEN+1)*LPC_CLK clocks after deassertion of ALE.
+
+ The default is wrong for the NOR flash and CPLD on the ADS5121.
+
+ This patch turns on the alternative for CS0 (NOR) and CS2 (CPLD)
+ it does so conditionally based on silicon rev 2.0 or greater.
+
+ Signed-off-by: Martha J Marx <mmarx@silicontkx.com>
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit 5d9a5efa4b332f442b54a755d49969123c3a8742
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Aug 19 00:56:46 2008 +0600
+
+ Add I2C frequency dividers for ColdFire
+
+ The existing I2C freqency dividers for FDR does not apply
+ to ColdFire platforms; thus, a seperate table is added
+ based on MCF5xxx Reference Manual
+
+ Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Acked-by: Tabi Timur <timur@freescale.com>
+
+commit eec567a67e00d1ed8d941e9098b7d421f4091abf
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Aug 19 03:01:19 2008 +0600
+
+ ColdFire: I2C fix for multiple platforms
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit d53cf6a9c7423cba668b867978648645f71c3090
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Aug 19 00:37:13 2008 +0600
+
+ ColdFire: Add CONFIG_MII_INIT for M5272C3
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit f78ced3028d4130b24a318943a70cf5584ab16f4
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Aug 19 00:26:25 2008 +0600
+
+ ColdFire: Multiple fixes for MCF5445x platforms
+
+ Add FEC pin set and mii reset in __mii_init(). Change
+ legacy flash vendor from 2 to AMD LEGACY (0xFFF0),
+ change cfi_offset to 0, and change CFG_FLASH_CFI to
+ CONFIG_FLASH_CFI_LEGACY. Correct M54451EVB and
+ M54455EVB env settings in configuration file.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 454e725b3a9537b7f273bbd0cbca180f23a7a6e8
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Fri Aug 15 18:24:25 2008 +0000
+
+ ColdFire: Change the SDRAM BRD2WT timing from 3 to 7
+
+ The user manuals recommend 7.
+
+ Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+ Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 79e0799cf6e88d98d77b216a55234bf674b59a4e
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Fri Aug 15 16:50:07 2008 +0000
+
+ ColdFire: Raise uart baudrate to 115200 bps
+
+ M5249EVB, M5271EVB, M5272C3, M5275EVB and M5282EVB platforms
+ uart baudrate increase from 19200 to 115200 bps
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit ab6ba842682552ccf071d0034da0a20633d1d1ac
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 13 12:07:03 2008 +0000
+
+ ColdFire: Fix board.c warning message
+
+ Implicit declaration of nand_init() warning message
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 5798b1c4650e9a8713c95b25c1e669a2bc80a97b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Aug 27 01:10:34 2008 -0500
+
+ FSL DDR: Remove duplicate setting of cs0_bnds register on 86xx.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 258c37b147353bc522ffc33dfbd7d0d9cd7c32d7
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Aug 21 20:44:49 2008 +0200
+
+ mpc52xx: added support for the MPC5200 based MUC.MC52 board from MAN.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 9cff4448a9cb882defe6c8bde73b77fc0c636799
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 19 14:46:36 2008 -0500
+
+ mpc85xx: remove redudant code with lib_ppc/interrupts.c
+
+ For some reason we duplicated the majority of code in lib_ppc/interrupts.c
+ not show how that happened, but there is no good reason for it.
+
+ Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why
+ they exist.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9490a7f1a9484617bad75c60807ce02c8a3a6d56
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Jul 25 13:31:05 2008 -0500
+
+ mpc85xx: Add support for the MPC8536DS reference board
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+ Signed-off-by: Dejan Minic <minic@freescale.com>
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ef50d6c06ece74fb17e8d7510e62cad9df8b810d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 12 11:14:19 2008 -0500
+
+ mpc85xx: Add support for the MPC8536
+
+ The MPC8536 Adds SDHC and SATA controllers to the PQ3 family. We
+ also have SERDES init code for the 8536.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+ Signed-off-by: Dejan Minic <minic@freescale.com>
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 129ba616b3813dde861f25f3d8a3c47c5c36ad5f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 12 11:13:08 2008 -0500
+
+ mpc85xx: Add support for the MPC8572DS reference board
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 457caecdbca3df21a93abff19eab12dbc61b7897
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Aug 27 01:05:35 2008 -0500
+
+ FSL DDR: Remove old SPD support from cpu/mpc85xx
+
+ All 85xx boards have been converted to the new code so we can
+ remove the old SPD DDR setup code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0e7927db138976469e7257e29c1338050a50fcd9
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Aug 27 01:04:07 2008 -0500
+
+ FSL DDR: Convert STXSSA to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c360d9b970fbb9c13744c355879671165bbb9b9e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Aug 27 01:03:42 2008 -0500
+
+ FSL DDR: Convert STXGP3 to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8e55313b7ae12352a343f9b9962e662dbd897187
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 23:52:58 2008 -0500
+
+ FSL DDR: Convert SBC8560 to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9658bec2e8f55d56ca1be70090ce5a348be4980f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 23:52:32 2008 -0500
+
+ FSL DDR: Convert MPC8540EVAL to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6bfa8f723cfd82c55e3ef5620ade396916470a70
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 23:52:07 2008 -0500
+
+ FSL DDR: Convert PM856 to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d53bd3e17bd4f460257c19255569ea6dcfaae817
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 23:51:49 2008 -0500
+
+ FSL DDR: Convert PM854 to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 33b9079ba20926f14238fff863b68a98e938948e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 23:15:28 2008 -0500
+
+ FSL DDR: Convert sbc8548 to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a947e4c7eb15cea1d9fb633955c516aab5ad35dd
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 23:14:14 2008 -0500
+
+ FSL DDR: Convert atum8548 to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit be0bd8234b9777ecd63c4c686f72af070d886517
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 22:56:56 2008 -0500
+
+ FSL DDR: Convert socrates to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 1167a2fd56138b716e01370c4267f3b70bf9ffa0
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 08:02:30 2008 -0500
+
+ FSL DDR: Convert MPC8544DS to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e6f5b35b41ddbd637bb9ca4ad985b1e0b07dae0e
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Mar 18 13:51:05 2008 -0500
+
+ FSL DDR: Convert MPC8568MDS to new DDR code.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e31d2c1e2bc954dc32e33bb2076139f85b95f8e6
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Mar 18 13:51:06 2008 -0500
+
+ FSL DDR: Convert MPC8548CDS to new DDR code.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit aa11d85cf318b961e029fe50d68ca47d004bce93
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon Mar 17 15:48:18 2008 -0500
+
+ FSL DDR: Convert MPC8541CDS to new DDR code.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2b40edb10d81da7bba724edbccd7f53777112579
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Mar 18 11:12:42 2008 -0500
+
+ FSL DDR: Convert MPC8555ADS to new DDR code.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8b625114e8bc5a6b436181167a6e7fcd3303dd2c
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Mar 18 11:12:44 2008 -0500
+
+ FSL DDR: Convert MPC8560ADS to new DDR code.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9617c8d49a21703eaf13a4033ab1a56eecc033cc
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Jun 6 13:12:18 2008 -0500
+
+ FSL DDR: Convert MPC8540ADS to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2a6c2d7ab2a66660f40a6cd3de2eb29ee29d9693
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 21:34:55 2008 -0500
+
+ FSL DDR: Add 85xx specific register setting
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6fb1b7346849ccd0c20306143e334f5b76143070
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Jun 9 11:07:46 2008 -0500
+
+ FSL DDR: Add e500 TLB helper for DDR code
+
+ Provide a helper function that board code can call to map TLBs when
+ setting up DDR.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d26b739afe5a6760bd345743188759cd9d0f3b47
+Author: Andrew Dyer <adyer@righthandtech.com>
+Date: Tue Aug 26 17:03:38 2008 -0500
+
+ dm9000 remove dead external phy support, gpio fix
+
+ dm9000 has code to detect and initialize external phy parts, but later
+ on in the code the part is forced to use the internal phy
+ unconditionally. Remove the unused/untested code.
+
+ change the GPIO initialization so that only the GPIO used as an
+ internal phy reset (hardwired in the chip) is set as an output. The
+ remaining GPIO need to be handled by board specific code to prevent
+ possible drive conflicts. Set as inputs for safety.
+
+ replace a few magic numbers with defines
+
+ Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit a1573db0c07c8ba99e9c373bb07ecd6f59da672c
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Aug 26 11:17:48 2008 -0500
+
+ Standardize bootp, tftpboot, rarpboot, dhcp, and nfs command descriptions
+
+ cmd_net.c command descriptions were updated to describe the optional
+ hostIPaddr argument. The dhcp command help message was also updated
+ to more closely reflect the other commands in cmd_net.c
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 51dfe1382ebaf691485badfa0ea5e75b0710531b
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Wed Aug 20 11:30:28 2008 +0200
+
+ Fix bogus error message in the DHCP handler
+
+ The DHCP handler has 1 state that is not listed in this case, causing a
+ failure message when there is actually no failure.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 61365501a0e2cae9c1df2818b7b5b3f52c450d18
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Wed Aug 20 11:30:27 2008 +0200
+
+ Fix compile error when CONFIG_BOOTP_RANDOM_DELAY is set.
+
+ The option CONFIG_BOOTP_RANDOM_DELAY does not compile, because of a
+ missing extern inside the net/bootp.h header
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 1803f7f91ff35ca402259065df7557107dcf28a2
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Aug 19 21:26:32 2008 +0000
+
+ ColdFire: Add FEC Buffer descriptors in SRAM
+
+ Add FEC Buffer descriptors and data buffer in SRAM for
+ faster execution and access.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 429be27ce195210d4b9decf9e867b9ca6155a87d
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Aug 21 23:55:11 2008 +0000
+
+ Fix ColdFire FEC warning messages
+
+ Types mismatch and implicit declaration of icache_invalid()
+ warning messages
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 6a002171098e968bd5b362347d2831224fab6048
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sat Jul 12 00:17:50 2008 -0700
+
+ Moved initialization of SKGE Ethernet driver to board code.
+
+ The only board using this driver is the SL8245 board.
+ Removed initialization for the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 8379f42bc745eb9e4ca551a30fd2d0a63f740d75
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sat Jul 12 00:08:45 2008 -0700
+
+ Moved conditional compilation to Makefile for SK98 Ethernet driver
+
+ Brute-force removal of #ifdefs. Didn't touch the code.
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 65d3d99c28dc363d15eaee78225ff643df499b97
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Fri Jul 11 23:42:19 2008 -0700
+
+ Moved initialization of ULI526X Ethernet driver to board code.
+
+ The only board using this driver is the Freescale MPC8610HPCD board.
+ Removed initialization for the driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 914947313a710f5dcf06beaf7f2aa24f1ebcce4f
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Fri Jul 11 23:15:28 2008 -0700
+
+ Moved initialization of Blackfin EMAC Ethernet controller to board_eth_init()
+
+ Added board_eth_init() function to bf537-stamp board.
+ Removed initialization for the Blackin EMAC driver from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit fc363ce35408f348cacced68505f3747a53e3d7c
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Wed Jul 9 01:04:19 2008 -0700
+
+ Moved initialization of GRETH Ethernet driver to CPU directory
+
+ Added a cpu_eth_init() function to leon2/leon3 CPU directories and
+ removed code from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 86882b80771309bceb11c6accfd7f6f90ade8bfc
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Tue Aug 26 22:16:25 2008 -0700
+
+ Moved initialization of MCFFEC Ethernet driver to CPU directory
+
+ Added a cpu_eth_init() function to coldfire CPU directories and
+ removed code from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit b31da88b9c160d80d42a59cbbb31e24f27184d5c
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Tue Aug 26 22:12:36 2008 -0700
+
+ Moved initialization of FSL_MCDMAFEC Ethernet driver to CPU directory
+
+ Added a cpu_eth_init() function to cpu/mcf547x_8x directory and
+ removed code from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit b5710d9974f6f0f3ddb4e67d6cccc262ab37049e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 15:01:38 2008 -0500
+
+ FSL DDR: Remove old SPD support from cpu/mpc86xx
+
+ All 86xx boards have been converted to the new code so we can
+ remove the old SPD DDR setup code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9bd4e5911b750837515466bc7449087698b88e0e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 15:01:37 2008 -0500
+
+ FSL DDR: Convert SBC8641D to new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 39aa1a73483e1ac2bd56d5523abfc3970ee82c77
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Tue Aug 26 15:01:36 2008 -0500
+
+ FSL DDR: Convert MPC8610HPCD to new DDR code.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 6a8e5692933e8e6d6e5ba7e594f49dd6d4c3a263
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 15:01:35 2008 -0500
+
+ FSL DDR: Convert MPC8641HPCN to new DDR code.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 46ff4f1100ea64a01d21cc008ce85ac15eb1821f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 15:01:34 2008 -0500
+
+ FSL DDR: Add 86xx specific register setting
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 233fdd502a6c227f476212b3097653ad48d7e254
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 15:01:32 2008 -0500
+
+ FSL DDR: Add DDR2 DIMM paramter support
+
+ Compute DIMM parameters based upon the SPD information.
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 05c05a2363a6ac11e0e405926034546ffad71fad
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 15:01:30 2008 -0500
+
+ FSL DDR: Add DDR1 DIMM paramter support
+
+ Compute DIMM parameters based upon the SPD information in spd.
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 58e5e9aff147e8c7e2bc1406bf9384f65f020ffa
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 15:01:29 2008 -0500
+
+ FSL DDR: Rewrite the FSL mpc8xxx DDR controller setup code.
+
+ The main purpose of this rewrite it to be able to share the same
+ initialization code on all FSL PowerPC products that have DDR
+ controllers. (83xx, 85xx, 86xx).
+
+ The code is broken up into the following steps:
+ GET_SPD
+ COMPUTE_DIMM_PARMS
+ COMPUTE_COMMON_PARMS
+ GATHER_OPTS
+ ASSIGN_ADDRESSES
+ COMPUTE_REGS
+ PROGRAM_REGS
+
+ This allows us to share more code an easily allow for board specific code
+ overrides.
+
+ Additionally this code base adds support for >4G of DDR and provides a
+ foundation for supporting interleaving on processors with more than one
+ controller.
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f784e32b4bce0013983506b11af4b85b8ca3d36e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 26 15:01:28 2008 -0500
+
+ FSL DDR: Provide a generic set_ddr_laws()
+
+ Provide a helper function that will setup the last available
+ LAWs (upto 2) for DDR. Useful for SPD/dyanmic DDR setting code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0f2cbe3f5eddbdf3848265f35e4f714434929cff
+Author: James Yang <James.Yang@freescale.com>
+Date: Tue Aug 26 15:01:27 2008 -0500
+
+ Add proper SPD definitions for DDR1/2/3
+
+ Also adds helper functions for DDR1/2 to verify the checksum.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 285db74716c724ae8a0ff177878fd09a74428c7b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Aug 27 01:02:48 2008 +0200
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit adf22b66d8bf05bd46e098cf71e6dca29b30aa7b
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Aug 19 10:08:49 2008 +0200
+
+ Add support for muas3001 board (MPC8270)
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 322098bff32410d2a00031649b47c4ec90a66d9a
+Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
+Date: Tue Aug 19 08:31:18 2008 +0530
+
+ common/cmd_load.c cleanup - remove unused variables
+
+ - Remove unused global variable os_data_count.
+ - Remove unused variable z.
+
+ Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
+
+commit 306620b762a4f9fa6678568ad2e8772dec145208
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Mon Aug 18 13:35:27 2008 +0200
+
+ remove MVS1 board
+
+ MVS1 board has reached end-of-life and can be removed completely.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+
+commit 40d7e99d374ba0a0a29cd1a8ba40d3b7c2c175c7
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:45 2008 -0500
+
+ bootm: refactor do_reset and os boot function args
+
+ There is no need for each OS specific function to call do_reset() we
+ can just do it once in bootm. This means its feasible on an error for
+ the OS boot function to return.
+
+ Also, remove passing in cmd_tbl_t as its not needed by the OS boot
+ functions. flag isn't currently used but might be in the future so
+ we left it alone.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 40afac22a9c602e55c501c800f1c064324711b56
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:44 2008 -0500
+
+ fdt: Added resize command
+
+ Resize the fdt to size + padding to 4k boundary
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2a1a2cb6e2b87ee550e6f27b647d23331dfd5e1b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:43 2008 -0500
+
+ fdt: refactor initrd related code
+
+ Created a new fdt_initrd() to deal with setting the initrd properties
+ in the device tree and fixing up the mem reserve. We can use this
+ both in the choosen node handling and lets us remove some duplicated
+ code when we fixup the initrd info in bootm on PPC.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3082d2348c8e13342f5fdd10e9b3f7408062dbf9
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:42 2008 -0500
+
+ fdt: refactor fdt resize code
+
+ Move the fdt resizing code out of ppc specific boot code and into
+ common fdt support code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 396f635b8ff3ccbc38d75d5eda98444c6466810a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:41 2008 -0500
+
+ bootm: refactor image detection and os load steps
+
+ Created a bootm_start() that handles the parsing and detection of all
+ the images that will be used by the bootm command (OS, ramdisk, fdt).
+ As part of this we now tract all the relevant image offsets in the
+ bootm_headers_t struct. This will allow us to have all the needed
+ state for future sub-commands and lets us reduce a bit of arch
+ specific code on SPARC.
+
+ Created a bootm_load_os() that deals with decompression and loading
+ the OS image.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e906cfae08e8cc2447f59b1bc4c22ab9c3c286d2
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:40 2008 -0500
+
+ bootm: move lmb into the bootm_headers_t structure
+
+ To allow for persistent state between future bootm subcommands we
+ need the lmb to exist in a global state.
+ Moving it into the bootm_headers_t allows us to do that.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 54f9c86691309b2f919f567f9255b8bcad2c7651
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:39 2008 -0500
+
+ bootm: Set working fdt address as part of the bootm flow
+
+ Set the fdt working address so "fdt FOO" commands can be used as part
+ of the bootm flow. Also set an the environment variable "fdtaddr"
+ with the value.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 06a09918f3903450313e2047a9cc258bf5872f46
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:38 2008 -0500
+
+ bootm: refactor fdt locating and relocation code
+
+ Move the code that handles finding a device tree blob and relocating
+ it (if needed) into common code so all arch's have access to it.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c4f9419c6b54958e0eddbcbc9e5a4a7b7ec99865
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:37 2008 -0500
+
+ bootm: refactor ramdisk locating code
+
+ Move determing if we have a ramdisk and where its located into the
+ common code. Keep track of the ramdisk start and end in the
+ bootm_headers_t image struct.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c160a9544743e80e8889edb2275538e7764ce334
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:36 2008 -0500
+
+ bootm: refactor entry point code
+
+ Move entry point code out of each arch and into common code.
+ Keep the entry point in the bootm_headers_t images struct.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 20220d22b9f41446288588cd2e457e0077a18bed
+Author: Randy Vinson <rvinson@mvista.com>
+Date: Wed Aug 13 11:44:57 2008 -0700
+
+ mpc7448hpc2: Fix PCI I/O space mapping.
+
+ PCI I/O space is currently mapped 1:1 at 0xFA000000. Linux requires
+ PCI I/O space to start at 0 on the PCI bus. This patch maps PCI I/O
+ space such that 0xFA000000 in the processor's address space maps to 0
+ on the PCI I/O bus.
+
+ Signed-off-by Randy Vinson <rvinson@mvista.com>
+ Acked-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit b4e07520bbb5467ad72eb92a5c9177d2797b9e30
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Wed Aug 13 18:10:26 2008 +0200
+
+ i.MX31: Specify maintainers for i.MX31-based boards
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 51e46e28fda4bbdf5149ac7f67d62fcc8df4da63
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Aug 26 15:01:28 2008 +0200
+
+ ADS5121: adjust image addresses in RAM and flash
+
+ Use the same mapping in flash as used by Linux
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 19f101412c16edee9fd55db4039e1d68a833b28b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Aug 26 13:14:34 2008 +0200
+
+ cmd_mem.c: Fix help message alignment
+
+ Bug was introced by "Big white-space cleanup" (53677ef1)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 1a9eeb78b825bfade31d7606a2fe3b9eca9e35be
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Wed Aug 20 11:11:52 2008 +0200
+
+ change mvBL-M7 default env and move to vendor subdir
+
+ fix mvBL-M7 config and move to matrix_vision subdir
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 002d27caf26e7eb913d474d3a91f67d56c8c31d5
+Author: Nick Spence <nick.spence@freescale.com>
+Date: Fri Aug 22 23:52:40 2008 -0700
+
+ MPC83XX: Add miscellaneous registers and #defines to support MPC83xx family devices
+
+ This patch adds elements to the 83xx sysconf structure and #define values that are used
+ by mpc83xx family devices.
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 447ad5768abda669ac0e7f46fcdb62fbe828d637
+Author: Ira W. Snyder <iws@ovro.caltech.edu>
+Date: Fri Aug 22 11:00:15 2008 -0700
+
+ MPC8349EMDS: Add PCI Agent (PCISLAVE) support
+
+ Add the ability for the MPC8349EMDS to run in PCI Agent mode, acting as a
+ PCI card rather than a host computer.
+
+ Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 4ff9aea9d6b5602683a920951ef896996438af62
+Author: Ira W. Snyder <iws@ovro.caltech.edu>
+Date: Fri Aug 22 11:00:14 2008 -0700
+
+ mpc83xx: add PCISLAVE support to 83XX_GENERIC_PCI setup code
+
+ This adds a helper function to unlock the PCI configuration bit, so that
+ any extra PCI setup (such as outbound windows, etc.) can be done after
+ using the 83XX_GENERIC_PCI code to set up the PCI bus.
+
+ Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 162338e1fcde231ca4d562e5ebd7859456731691
+Author: Ira W. Snyder <iws@ovro.caltech.edu>
+Date: Fri Aug 22 11:00:13 2008 -0700
+
+ MPC8349EMDS: use 83XX_GENERIC_PCI setup code
+
+ Change the MPC8349EMDS board to use the generic PCI initialization code
+ for the mpc83xx cpu.
+
+ Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit f4e55a4941e8ba46bc06020b2747928adf8fdee7
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Mon Aug 25 14:53:09 2008 -0500
+
+ fix out of tree building
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit a49d10cf027d059ee15c262010a05cdaec0961e1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Aug 25 23:45:41 2008 +0200
+
+ Minor coding style cleanup, updte CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4d56e8dea670757c801a6a65531f02a8f981ce1f
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Aug 20 20:29:38 2008 +0200
+
+ RTC: Fix Makefile problem with COBJS-$(CONFIG_RTC_DS1307 || CONFIG_RTC_DS1338)
+
+ This "||" doesn't seem to work. Now using the idea suggest by Scott Wood
+ to combine both config options into one line. This even allows defining
+ both options and not generating the target object twice.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 079edb913dbae147b50a488cf02e03f473fc5f28
+Author: Jens Gehrlein <sew_s@tqs.de>
+Date: Fri Jul 4 16:50:05 2008 +0200
+
+ MX31: fix bit masks in function mx31_decode_pll()
+
+ Bits MPCTL[MFN] and MPCTL[MFD] were not fully covered.
+
+ Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
+
+commit e8f1207bbf2df6fb693ee1aa3329b2014c92e5e6
+Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
+Date: Mon Aug 25 11:11:34 2008 +0200
+
+ Correct ARM Versatile Timer Initialization
+
+ - According to ARM Dual-Timer Module (SP804) TRM (ARM DDI0271),
+ -- Timer Value Register @ TIMER Base + 4 is Read-only.
+ -- Prescale Value (Bits 3-2 of TIMER Control register)
+ can only be one of 00,01,10. 11 is undefined.
+ -- CFG_HZ for Versatile board is set to
+ #define CFG_HZ (1000000 / 256)
+ So Prescale bits is set to indicate
+ - 8 Stages of Prescale, Clock divided by 256
+ - The Timer Control Register has one Undefined/Shouldn't Use Bit
+ So we should do read/modify/write Operation
+
+ Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
+
+commit 535cfa4f3de86cf48d6c0af1daf33aebdca089f9
+Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
+Date: Mon Aug 25 11:30:29 2008 +0200
+
+ Add ARM AMBA PL031 RTC Support
+
+ Signed-off-by: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
+
+commit e39411674669cc880e1ec4a8ca4794fb15c33a45
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Tue Aug 19 16:21:03 2008 -0400
+
+ ARM DaVinci: Removed redundant NAND initialization code.
+
+ ARM DaVinci: Removed redundant NAND initialization code.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit b3fb663b20d995ca41327db877ddb168279b3f62
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Tue Aug 19 16:21:00 2008 -0400
+
+ ARM DaVinci: Fix compilation error with new MTD code.
+
+ ARM DaVinci: Fix compilation error with new MTD code.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit 109c30fb8edea1a15d37a6ce787cd5faf33d8e43
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Fri Aug 22 14:37:05 2008 -0400
+
+ Add note on dereferencing /aliases pointers
+
+ Replace the "must quote special characters" note with a hint on
+ how to dereference /aliases pointers by omitting the leading "/".
+ This feature was introduced by Kumar Gala as a libfdt enhancement
+ in commit ed035708235332c3c117ee3bb1a426063f03cfcb.
+
+ Example:
+
+ => fdt print /aliases
+ aliases {
+ ethernet0 = "/qe@e0100000/ucc@2000";
+ ethernet1 = "/qe@e0100000/ucc@3000";
+ serial0 = "/soc8360@e0000000/serial@4500";
+ serial1 = "/soc8360@e0000000/serial@4600";
+ pci0 = "/pci@e0008500";
+ };
+ => fdt print ethernet0
+ ucc@2000 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ cell-index = <0x1>;
+ reg = <0x2000 0x200>;
+ interrupts = <0x20>;
+ interrupt-parent = <0x2>;
+ local-mac-address = [00 00 00 00 00 00];
+ rx-clock-name = "none";
+ tx-clock-name = "clk9";
+ phy-handle = <0x3>;
+ phy-connection-type = "rgmii-id";
+ pio-handle = <0x4>;
+ };
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit feeca3f578b7f53c032ba203698751c982f8bf5a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Aug 14 08:28:19 2008 -0500
+
+ libfdt: Add support for using aliases in fdt_path_offset()
+
+ If the path doesn't start with '/' check to see if it matches some alias
+ under "/aliases" and substitute the matching alias value in the path
+ and retry the lookup.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: David Gibson <david@gibson.dropbear.id.au>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 0219399a4e3a8edb428e1924e1a03d58cccf8d8e
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Wed Aug 6 14:50:49 2008 +1000
+
+ libfdt: Implement fdt_get_property_namelen() and fdt_getprop_namelen()
+
+ As well as fdt_subnode_offset(), libfdt includes an
+ fdt_subnode_offset_namelen() function that takes the subnode name to
+ look up not as a NUL-terminated string, but as a string with an
+ explicit length. This can be useful when the caller has the name as
+ part of a longer string, such as a full path.
+
+ However, we don't have corresponding 'namelen' versions for
+ fdt_get_property() and fdt_getprop(). There are less obvious use
+ cases for these variants on property names, but there are
+ circumstances where they can be useful e.g. looking up property names
+ which need to be parsed from a longer string buffer such as user input
+ or a configuration file, or looking up an alias in a path with
+ IEEE1275 style aliases.
+
+ So, since it's very easy to implement such variants, this patch does
+ so. The original NUL-terminated variants are, of course, implemented
+ in terms of the namelen versions.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit f171746f701ea58bf6a53e835b53d2aaebee0d81
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Tue Jul 29 14:51:22 2008 +1000
+
+ libfdt: Forgot one function when cleaning the namespace
+
+ In commit b6d80a20fc293f3b995c3ce1a6744a5574192125, we renamed all
+ libfdt functions to be prefixed with fdt_ or _fdt_ to minimise the
+ chance of collisions with things from whatever package libfdt is
+ embedded in, pulled into the libfdt build via that environment's
+ libfdt_env.h.
+
+ Except... I missed one. This patch applies the same treatment to
+ _stringlist_contains(). While we're at it, also make it static since
+ it's only used in the same file.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit 46390da15411351fc3b498bd8c1615f78fe80df0
+Author: Wolfram Sang <w.sang@pengutronix.de>
+Date: Wed Jul 9 11:22:44 2008 +0200
+
+ libfdt: Improve documentation in libfdt.h
+
+ Fix a few typos and mistakes.
+
+ Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
+ Acked-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit fc7758ee4f5782878f2e96876b7bc56cfee0ac66
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Wed Jul 9 14:10:24 2008 +1000
+
+ libfdt: Increase namespace-pollution paranoia
+
+ libfdt is supposed to easy to embed in projects all and sundry.
+ Often, it won't be practical to separate the embedded libfdt's
+ namespace from that of the surrounding project. Which means there can
+ be namespace conflicts between even libfdt's internal/static functions
+ and functions or macros coming from the surrounding project's headers
+ via libfdt_env.h.
+
+ This patch, therefore, renames a bunch of libfdt internal functions
+ and macros and makes a few other chances to reduce the chances of
+ namespace collisions with embedding projects. Specifically:
+ - Internal functions (even static ones) are now named _fdt_*()
+
+ - The type and (static) global for the error table in
+ fdt_strerror() gain an fdt_ prefix
+
+ - The unused macro PALIGN is removed
+
+ - The memeq and streq macros are removed and open-coded in the
+ users (they were only used once each)
+
+ - Other macros gain an FDT_ prefix
+
+ - To save some of the bulk from the previous change, an
+ FDT_TAGALIGN() macro is introduced, where FDT_TAGALIGN(x) ==
+ FDT_ALIGN(x, FDT_TAGSIZE)
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit c66830263af19831f2b7db307f79d1943febf7f9
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Mon Jul 7 10:14:15 2008 +1000
+
+ dtc: Enable and fix -Wcast-qual warnings
+
+ Enabling -Wcast-qual warnings in dtc shows up a number of places where
+ we are incorrectly discarding a const qualification. There are also
+ some places where we are intentionally discarding the 'const', and we
+ need an ugly cast through uintptr_t to suppress the warning. However,
+ most of these are pretty well isolated with the *_w() functions. So
+ in the interests of maximum safety with const qualifications, this
+ patch enables the warnings and fixes the existing complaints.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit ef4e8ce1beb5b93aedda5a4c1b90bfd989c6791e
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Mon Jul 7 10:10:48 2008 +1000
+
+ dtc: Enable and fix -Wpointer-arith warnings
+
+ This patch turns on the -Wpointer-arith option in the dtc Makefile,
+ and fixes the resulting warnings due to using (void *) in pointer
+ arithmetic. While convenient, pointer arithmetic on void * is not
+ portable, so it's better that we avoid it, particularly in libfdt.
+
+ Also add necessary definition of uintptr_t needed by David Gibson's
+ changeset "dtc: Enable and fix -Wpointer-arith warnings" (the definition
+ comes from stdint.h, which u-boot doesn't have). -- gvb
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 5d4b3d2b31e58fcb2d4bd10af762f5ff41b229fd
+Author: Tirumala R Marri <tmarri@amcc.com>
+Date: Thu Aug 21 21:54:53 2008 -0700
+
+ ppc4xx: AMCC PPC460GT/EX PCI-E de-emphasis adjustment fix
+
+ During recent PCI-E tests it has been found that current
+ driverl level and de-emphasis values are not set correctly.
+ After sweeping throgh all de-ephasis values, it was found that
+ 0x130 is a right value. Where 0x13 is driver level and 0 is
+ de-emphasis.
+
+ Signed-off-by: Tirumala R Marri <tmarri@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0bb86d823b6c150c7ee17de0cfca9ffccc16463b
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Wed Aug 20 20:46:56 2008 +0200
+
+ Make the YAFFS filesystem work
+
+ Recently the YAFFS filesystem support has been added to U-boot.
+ However, just enabling CONFIG_YAFFS2 is not enough to get it working.
+
+ ymount will generate an exception (when dereferencing mtd->readoob()), because
+ the genericDevice is a null pointer. Further, a lot of logging is produced
+ while using YAFFS fs, so logging should also be disabled.
+ Both issues are solved by this patch.
+
+ With this patch and CONFIG_YAFFS2 enabled, I get a readable filesystem
+ in U-boot, as well as in Linux.
+
+ Tested on a Atmel AT91SAM9261EK board.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Acked-by: William Juul <william.juul@tandberg.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit bfd7f38614e21f745b6d6845fcc616ebc5e4d36f
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Tue Aug 19 08:42:53 2008 +0900
+
+ Fix OneNAND read_oob/write_oob functions compatability
+
+ Also sync with kernel OneNAND codes
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 8d765456c1d33f2010d2717ee58de7647fdc6346
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Aug 18 17:11:20 2008 -0500
+
+ NAND: Remove delay from nand_boot_fsl_elbc.c.
+
+ It was for debugging purposes, and shouldn't have been left in.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit f556483734126793522fb7a8cf36af90da78f084
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Aug 21 11:05:03 2008 +0200
+
+ ppc4xx: Cleanup of "ppc4xx: Optimize PLB4 Arbiter..." patch
+
+ This patch fixes some minor issues introduced with the patch:
+ ppc4xx: Optimize PLB4 Arbiter... from Prodyut Hazarika:
+
+ - Rework memory-queue and PLB arbiter optimization code, that the
+ local variable is not needed anymore. This removes one #ifdef.
+ - Use consistant spacing in ppc4xx.h header (XXX + 0x01 instead
+ of XXX+ 0x01). This was not introduced by Prodyut, just a
+ copy-paste problem.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 079589bcfb24ba11068460276a3cc9549ab5346f
+Author: Prodyut Hazarika <phazarika@amcc.com>
+Date: Wed Aug 20 09:38:51 2008 -0700
+
+ ppc4xx: Optimize PLB4 Arbiter and Memory Queue settings for PPC440SP/SPe,
+ PPC405EX and PPC460EX/GT/SX
+
+ - Read pipeline depth set to 4 for PPC440SP/SPE, PPC405EX, PPC460EX/GT/SX
+ processors
+ - Moved PLB4 Arbiter register definitions to ppc4xx.h since it is shared
+ across processors (405 and 440/460)
+ - Optimize Memory Queue settings for PPC440SP/SPE and PPC460EX/GT/SX
+ processors
+ - Add register bit definitions for Memory Queue Configuration registers
+
+ Signed-off-by: Prodyut Hazarika <phazarika@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ba37aa03287c5483c61c0a3e320c8888bee0143a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Aug 19 15:41:18 2008 -0500
+
+ fdt: rework fdt_fixup_ethernet() to use env instead of bd_t
+
+ Move to using the environment variables 'ethaddr', 'eth1addr', etc..
+ instead of bd->bi_enetaddr, bi_enet1addr, etc.
+
+ This makes the code a bit more flexible to the number of ethernet
+ interfaces.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 4cacf7c64609839f809e2f9c45873f1d65861703
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Aug 19 14:57:55 2008 +0200
+
+ hush: Fix printf debug macro in hush.c so that it usable in U-Boot
+
+ This patch changes the debug_printf() marco for U-Boot in hush.c and
+ moves the definition of DEBUG_SHELL to a place that is actually compiled
+ under U-Boot.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8f2b457ef26a44d9e5fd7d6b16c394e5c3a71ca2
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Aug 19 09:57:41 2008 +0200
+
+ cfi: rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
+
+ Commit 00b1883a4cac59d97cd297b1a3a398db85982865
+ missed a few boards:
+ include/configs/M5253DEMO.h
+ include/configs/ml507.h
+ include/configs/redwood.h
+
+ This patch fixes this.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 0768b7a872964085eece8d5e9fec9175e9deb161
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Mon Aug 18 13:41:27 2008 +0200
+
+ Consolidate strmhz() implementation
+
+ ARM, i386, m68k and ppc all have identical implementations of strmhz().
+ Other architectures don't provide this function at all.
+
+ This patch moves strmhz() into lib_generic, reducing code duplication
+ and providing a more unified API across architectures.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit a928d0df211f1d829308d335d19be3ca42558dfc
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Mon Aug 18 12:02:51 2008 +0200
+
+ fix mvbc_p board build warnings
+
+ fix build warnings @ mvBC-P board by using correct types, i.e. change
+ out_be32 to out_be16 and out_8 accordingly.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+
+commit a958b663d27f616bd1dfb720d1b476d1ecaaa569
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 16 18:54:27 2008 +0200
+
+ Makefile: fix posix support on find
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit bef92e215d945cc574399c1a1b00a3a76d35aa03
+Author: Axel Beierlein <belatronix@web.de>
+Date: Sat Aug 16 00:30:48 2008 +0200
+
+ Adding bootlimit/bootcount feature for MPC5XXX on TQM5200 Boards
+
+ Tested with TQM5200S on STK52XX.200 Board
+
+ Signed-off-by: Axel Beierlein <belatronix@web.de>
+
+commit 0800707b6d5041a840a65d556032c15c584b55f8
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Aug 15 14:36:32 2008 -0500
+
+ mod_i2c_mem() bugfix
+
+ The last used chip, address, and address length were not being
+ stored for the imm and imn commands.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 4afbef967275b2f636abae86f91b81becee7ad03
+Author: Steven A. Falco <sfalco@harris.com>
+Date: Fri Aug 15 15:37:31 2008 -0400
+
+ Fix typo in spelling of ATAPI.
+
+ Correct a small spelling mistake.
+
+ Signed-off-by: Steven A. Falco <sfalco@harris.com>
+
+commit 36c2d3062ecc6ab85f8e237180eb134464c48418
+Author: Steven A. Falco <sfalco@harris.com>
+Date: Fri Aug 15 15:34:10 2008 -0400
+
+ Add a hook to allow board-specific PIO mode setting.
+
+ This patch adds a hook whereby a board-specific routine can be called to
+ configure hardware for a PIO mode. The prototype for the board-specific
+ routine is:
+
+ int inline ide_set_piomode(int pio_mode)
+
+ ide_set_piomode should be prepared to configure hardware for a pio_mode
+ between 0 and 6, inclusive. It should return 0 on success or 1 on failure.
+
+ Signed-off-by: Steven A. Falco <sfalco@harris.com>
+
+commit 9571b84cb1423876f1153081b9e6a51d90fbcdc4
+Author: Steven A. Falco <sfalco@harris.com>
+Date: Fri Aug 15 15:29:12 2008 -0400
+
+ Replace enums in ata.h with an include of libata.h
+
+ This patch removes some enums from ata.h and replaces them with an
+ include of libata.h. This way, we eliminate duplicated code, and
+ prevent errors whereby the different versions could be out of sync.
+
+ Signed-off-by: Steven A. Falco <sfalco@harris.com>
+
+commit 0de0afbca865ecf482b4d2b635236746def8518f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Aug 15 18:32:41 2008 +0200
+
+ coldfire: fix CFI drivers activation with new macro
+
+ rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7dbc38ad915f4ae67f4cd1818b7ac8fed368aaa9
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:35 2008 -0500
+
+ fdt: fdt addr w/o any args reports back the current working address
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f953d99fd528a496b400a706b511eaf8e3ea66af
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:34 2008 -0500
+
+ fdt: added the ability to set initrd start/end via chosen command
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ffa4bafacaef67058463b3d7d0099ced57569dd2
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:33 2008 -0500
+
+ Add command to enable/disable interrupts
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9e8e63cce69556aef10b58bcbc56d324f570ec3a
+Author: Nick Spence <nick.spence@freescale.com>
+Date: Tue Aug 19 22:21:16 2008 -0700
+
+ CFI: Add CFI_CMDSET_INTEL_EXTENDED to fix flash_real_protect()
+
+ This patch fixes a missing vendor code in the flash_real_protect() function.
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4e00acded2e6a8d663e12690a0f0f08f5bec5a58
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Aug 19 16:53:39 2008 +0000
+
+ CFI: Fix AMD Legacy sector protect
+
+ New implement sector lock and unlock or softlock commands
+ do not exist in AMD legacy flash. Thus, causing issue
+ when erasing AMD legacy flash (such as lv040)
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 492671404140f09d5b21b3d2ce4e362c0692c069
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed Aug 20 09:40:16 2008 +0200
+
+ hammerhead/mimc200: Use CONFIG_FLASH_CFI_DRIVER
+
+ CFG_FLASH_CFI_DRIVER was recently renamed CONFIG_FLASH_CFI_DRIVER.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 33eac2b3d946fc998a09245dfe54d017079b9056
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed Aug 20 09:28:36 2008 +0200
+
+ hammerhead: Add missing printf parameter to CONFIG_AUTOBOOT_PROMPT
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 25da0b84195fdda89a943b2d25757db5afeef5b8
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed Aug 20 09:27:37 2008 +0200
+
+ favr-32-ezkit: Fix printf format warnings
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 462da25e89b0b58bf4c66346c1fcb3087c61b4b8
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Fri Aug 15 12:04:25 2008 +0200
+
+ MAINTAINERS: Sort avr32 section alphabetically
+
+ The rest of the MAINTAINERS file appears to be sorted
+ almost-alphabetically, but entries for the newly added AVR32 boards were
+ added somewhat randomly. This patch sorts the list alphabetically again.
+
+ Also update my e-mail address. The old one still works, but it may not
+ work forever.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 13b50fe3bc065c48911fa373231421280855a9d6
+Author: Mark Jackson <mpfj@mimc.co.uk>
+Date: Wed Jul 30 13:07:27 2008 +0100
+
+ avr32: Add MIMC200 board
+
+ The MIMC200 board is based on Atmel's NGW100 dev kit, but with an extra
+ 8MByte FLASH and 128KByte FRAM.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit db70b84329315c52f6ec77f5ae5ca1afe970a9bb
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Wed Jul 9 21:07:34 2008 +0900
+
+ rtl8169: add support for RTL8110SCL
+
+ This patch fixes a problem that RTL8110SCL started transfer
+ with an incorrect memory address.
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 943b825bf15e6a28ac8328e0f6489478bceef1ea
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jun 25 15:48:52 2008 -0500
+
+ Fix dm9000 receive status and len little endian issue
+
+ The received status and len was in little endian
+ format and caused the ethernet unable to proceed
+ further. Add __le16_to_cpu() in dm9000_rx_status_8/16/32bit().
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit fcd69a1a57fb2af4d26201422095a4be9f36963e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:32 2008 -0500
+
+ Clean up usage of icache_disable/dcache_disable
+
+ There is no point in disabling the icache on 7xx/74xx/86xx parts and not
+ also flushing the icache. All callers of invalidate_l1_instruction_cache()
+ call icache_disable() right after. Make it so icache_disable() calls
+ invalidate_l1_instruction_cache() for us.
+
+ Also, dcache_disable() already calls dcache_flush() so there is no point
+ in the explicit calls of dcache_flush().
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a15b07104ca7bbb7093c9009c9ae1b58b4202d13
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Aug 15 08:24:31 2008 -0500
+
+ Update linux bootm to support ePAPR client interface
+
+ The ePAPR spec has some subtle differences from the current device
+ tree based boot interface to the powerpc linux kernel. The powerpc
+ linux kernel currently ignores the differences that ePAPR specifies.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit b734e5556a239b3be5f9693b2f4b4b739683ec16
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Aug 18 23:50:20 2008 +0200
+
+ Minor code cleanup: keep lists sorted.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d0039d4ed275e6ca09fb417895024ad02be118c4
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Wed Jul 23 19:10:14 2008 +0200
+
+ Add support for ADT7460 I2C monitor chip
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+
+commit eb59ea45ab77c14b090ea857d9ea9f902f40db0b
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Jul 14 19:45:45 2008 +0200
+
+ video: Clean drivers/video/Makefile
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 871c18dd301752270e1f74328c846c3104be1e2e
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Jul 14 19:45:37 2008 +0200
+
+ rtc: Clean drivers/rtc/Makefile
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit a4a549b4b53adf40a0d3882cc30ac812a8f847c5
+Author: Michal Simek <monstr@monstr.eu>
+Date: Mon Jul 14 19:45:35 2008 +0200
+
+ i2c: Clean drivers/i2c/ Makefile
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 0a823aa2a8a8c0685e73900f387d602d7edafc0e
+Author: Harald Welte <laforge@openmoko.org>
+Date: Wed Jul 9 22:30:30 2008 +0800
+
+ Add 'license' command to U-Boot command line
+
+ The 'license' command includes the U-Boot license (GPLv2) into the
+ actual bootloader binary. The license text can be shown interactively
+ at the U-Boot commandline.
+
+ For products where the commandline can actually be accessed by the
+ end user, this helps to prevent inadvertent GPL violations, since the
+ GPLv2 license text can no longer be 'forgotten' to be included into
+ the product.
+
+ The 'license' command can be enabled by CONFIG_CMD_LICENSE.
+
+ Signed-off-by: Harald Welte <laforge@openmoko.org>
+
+commit fe2ce5500ebf43d79d227190bd2370232d5b113d
+Author: Harald Welte <laforge@gnumonks.org>
+Date: Sun Jul 6 15:56:38 2008 +0800
+
+ add 'unzip' command to u-boot commandline
+
+ [PATCH] add new 'unzip' command to u-boot commandline
+
+ common/cmd_mem.c: new command "unzip srcaddr dstaddr [dstsize]" to unzip from
+ memory to memory, and option CONFIG_CMD_UNZIP to enable it
+
+ Signed-off-by: Werner Almesberger <werner@openmoko.org>
+ Signed-off-by: Harald Welte <laforge@openmoko.org>
+
+commit 07efc9e321619c3dec213310c32e011aa6f02783
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 6 19:37:17 2008 -0500
+
+ Change CFG_ENV_SIZE to CFG_ENV_SECT_SIZE for SPI sector erase
+
+ The CFG_ENV_SIZE is not suitable used for SPI flash erase
+ sector size if CFG_ENV_SIZE is less than CFG_ENV_SECT_SIZE.
+ Add condition check if CFG_ENV_SIZE is larger than
+ CFG_ENV_SECT_SIZE, calculate the right number of sectors for
+ erasing.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 4cb4e654cafabaa1ac180d37b00c8f6095dae9c9
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Aug 11 15:54:25 2008 +0000
+
+ ColdFire: Multiple fixes for M5282EVB
+
+ Incorrect CFG_HZ value, change 1000000 to 1000.
+ Rename #waring to #warning. RAMBAR1 uses twice
+ in start.S, rename the later to FLASHBAR. Insert
+ nop for DRAM setup. And, env_offset in linker file.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 10db3a17a278dd3a27668b31cb32cdd1476e9513
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Aug 11 15:26:43 2008 +0000
+
+ ColdFire: Move m5282evb from board to board/freescale
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 56df091d391f74bbf2dc2f7931f9f3c8f23529e4
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Aug 11 15:25:07 2008 +0000
+
+ ColdFire: Move m5272c3 from board to board/freescale
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 659e9bad629a480f606b286d5703aef7159edf98
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Aug 11 15:23:16 2008 +0000
+
+ ColdFire: Move m5271evb from board to board/freescale
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 05316f8ece8206339a208ec052f039cd0f7ca922
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Aug 11 13:41:49 2008 +0000
+
+ ColdFire: Add M54451EVB platform support for MCF5445x
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 922cd7515597e9a2c07d68e2a6240b0b7b0f0136
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 6 19:14:08 2008 -0500
+
+ ColdFire: Add Serial Flash support for M54455EVB
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 9f751551456828b2d0ff417f10959fb0c7110bd0
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jul 23 20:38:53 2008 -0500
+
+ ColdFire: Implement SBF feature for M5445EVB
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit a7323bba229203aae2604afde131ab47bad4eadc
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jul 23 17:53:36 2008 -0500
+
+ ColdFire: Add SSPI feature for MCF5445x
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit b2d022d1ac3f59bffa9cec249341e77aea168abc
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jul 23 17:37:10 2008 -0500
+
+ ColdFire: Use CFI Flash driver for M54455EVB
+
+ Remove non-common flash driver in
+ board/freescale/m54455evb/flash.c. The non-cfi flash will
+ use CONFIG_FLASH_CFI_LEGACY to configure the flash
+ attribute.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 6d33c6acfa35b1144d46ffbff7e29ee7969290d0
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jul 23 17:11:47 2008 -0500
+
+ ColdFire: Add M5253DEMO platform support for MCF5253
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 80ba61fd82569af40e04d4a089257b81881884f2
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 6 14:17:09 2008 -0500
+
+ ColdFire: Raise M5253EVBE uart baudrate to 115200 bps
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit d361307e73ce1f6fc68760123f37d4876f851f3e
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Aug 6 14:11:36 2008 -0500
+
+ ColdFire: Fix M5253EVB dram bring up issue
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 4b0708093e15b412296328bf81325cf9b69fe512
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Aug 14 14:41:06 2008 +0200
+
+ Coding Style cleanup, update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 68cf19aae48f2969ec70669604d0d776f02c8bc4
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Aug 13 18:24:05 2008 -0500
+
+ socrates: Update NAND driver to new API.
+
+ Also, fix some minor formatting issues, and simplify the handling of
+ "state" for writes.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit ba22d10f39eaeedd035e8265616e31ff88e314d5
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Aug 13 18:03:40 2008 -0500
+
+ quad100hd: Update NAND driver to new API.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit f64cb652a8a84c5c34d0afcbd7ffef886aa1d838
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Aug 13 17:53:48 2008 -0500
+
+ m5373evb: Update NAND driver to new API.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 1a23a197c8722b805f40895544bbdb1a648c1c82
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Aug 13 17:04:30 2008 -0500
+
+ s3c24x0: Update NAND driver to new API.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit aa5f75f20db8a7103fad9c34d6f1193e10d1890f
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Aug 13 15:56:00 2008 -0500
+
+ at91: Update board NAND drivers to current API.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit d438d50848e9425286e5fb0493e0affb5a0b1e1b
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Wed Aug 13 09:11:02 2008 +0900
+
+ Fix OneNAND build break
+
+ Since page size field is changed from oobblock to writesize. But OneNAND is not updated.
+ - fix bufferram management at erase operation
+ This patch includes the NAND/OneNAND state filed too.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 9483df6408c25f16060432de3868901e352e23bc
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Aug 13 01:40:43 2008 +0200
+
+ drivers/mtd/nand_legacy: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit cc4a0ceeac5462106172d0cc9d9d542233aa3ab2
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Aug 13 01:40:43 2008 +0200
+
+ drivers/mtd/nand: Move conditional compilation to Makefile
+
+ rename CFG_NAND_LEGACY to CONFIG_NAND_LEGACY
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 4fb09b81920e5dfdfc4576883186733f0bd6059c
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Aug 13 01:40:42 2008 +0200
+
+ drivers/mtd/onenand: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 00b1883a4cac59d97cd297b1a3a398db85982865
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Aug 13 01:40:42 2008 +0200
+
+ drivers/mtd: Move conditional compilation to Makefile
+
+ rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7ba44a5521cdb7fa1c72864025cde1e21a6f6921
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Aug 13 01:40:41 2008 +0200
+
+ drivers/qe: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ab6878c7bc68a7b5e5b731655bdc13221bbfc493
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Aug 13 01:40:40 2008 +0200
+
+ drivers/pci: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 55d6d2d39fe3fe87802e399aa17539368b495d2e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Aug 13 01:40:40 2008 +0200
+
+ drivers/misc: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 65e41ea0548b86e3d7892defac8e4dc1ea70aed1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Aug 13 01:40:40 2008 +0200
+
+ drivers/input: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 88f57e093114a44aa9a858d52b099bcc52034a8c
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Aug 13 01:40:39 2008 +0200
+
+ drivers/dma: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1a02806c4b1b4a09ad4e95d3aac3783889e5f8d7
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Aug 13 01:40:39 2008 +0200
+
+ drivers/block: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1a6ffbfaf4353bec379ed1fcfc54b6f1a30af09a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Aug 13 01:40:39 2008 +0200
+
+ serial: move CFG_NS9750_UART to CONFIG_NS9750_UART
+
+ move also conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6c58a030f86829fa4f0d4337cf4b794c41a1823e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Aug 13 01:40:38 2008 +0200
+
+ serial: move CFG_SCIF_CONSOLE to CONFIG_SCIF_CONSOLE
+
+ move also conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d6e9ee92e890f67594ab150689510df361133ead
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Aug 13 01:40:38 2008 +0200
+
+ common: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f5acb9fd9bba1160de3ef349c7d33fe510eda286
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Aug 13 01:40:09 2008 +0200
+
+ mx31: move freescale's mx31 boards to vendor board dir
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 8ed2f5f950e2581214d20b011a8f27a6396d65d2
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jul 5 23:11:11 2008 +0200
+
+ at91: move arch-at91sam9 to arch-at91
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 195ccfc5991d48764b2519941e3507f693851d5d
+Author: Fathi BOUDRA <fabo@debian.org>
+Date: Wed Aug 6 10:06:20 2008 +0200
+
+ OneNAND: Fill in MTD function pointers for OneNAND.
+
+ onenand_print_device_info():
+ - Now returns a string to be placed in mtd->name,
+ rather than calling printf.
+ - Remove verbose parameter as it becomes useless.
+
+ Signed-off-by: Fathi Boudra <fabo@debian.org>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit aa646643b6bc250cb3a4966bf728876e0c10d329
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Wed Aug 6 21:42:07 2008 +0200
+
+ nand_spl: Support page-aligned read in nand_load, use chipselect
+
+ Supporting page-aligned reads doesn't incure any sinificant overhead, just
+ a small change in the algorithm. Also replace in_8 with readb, since there
+ is no in_8 on ARM.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 4f32d7760a58fe73981b6edc0b0751565d2daa4c
+Author: Scott Wood <scottwood@freescale.com>
+Date: Tue Aug 5 11:15:59 2008 -0500
+
+ NAND boot: Update large page support for current API.
+
+ Also, remove the ctrl variable in favor of passing the constants
+ directly, and remove redundant (u8) casts.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit e4c09508545d1c45617ba45391c03c03cbc360b9
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon Jun 30 14:13:28 2008 -0500
+
+ NAND boot: MPC8313ERDB support
+
+ Note that with older board revisions, NAND boot may only work after a
+ power-on reset, and not after a warm reset. I don't have a newer board
+ to test on; if you have a board with a 33MHz crystal, please let me know
+ if it works after a warm reset.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit acdab5c33f1ea6f5e08f06f08bc64af23ff40d71
+Author: Scott Wood <scottwood@freescale.com>
+Date: Thu Jun 26 14:06:52 2008 -0500
+
+ mpc8313erdb: Enable NAND in config.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit c3db8c649c6ab3da2f1411c4c6d61aecea054aa4
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Thu Jul 31 12:38:26 2008 +0200
+
+ NAND: Do not write or read a whole block if it is larger than the environment
+
+ Environment can be smaller than NAND block size, do not need to read a whole
+ block and minimum for writing is one page. Also remove an unused variable.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit eafcabd15f00c142156235c519fcc55b10993241
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Sun Jun 22 16:30:06 2008 +0200
+
+ NAND: chip->state does not always get set.
+
+ Fixes an issue with chip->state not always being set causing troubles.
+
+ Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 13f0fd94e3cae6f8a0d9fba5d367e311edc8ebde
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Mon Jun 30 15:34:40 2008 +0200
+
+ NAND: Scan bad blocks lazily.
+
+ Rather than scanning on boot, scan upon the first attempt to check the
+ badness of a block. This speeds up boot when not using NAND, and reduces
+ the likelihood of needing to reflash via JTAG if NAND becomes
+ nonfunctional.
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit dfbf617ff055e4216f78d358b0867c548916d14b
+Author: Scott Wood <scottwood@freescale.com>
+Date: Thu Jun 12 13:20:16 2008 -0500
+
+ NAND read/write fix
+
+ Implement block-skipping read/write, based on a patch from
+ Morten Ebbell Hestens <morten.hestnes@tandberg.com>.
+
+ Signed-off-by: Morten Ebbell Hestnes <morten.hestnes@tandberg.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 984e03cdf1431bb593aeaa1b74c445d616f955d3
+Author: Scott Wood <scottwood@freescale.com>
+Date: Thu Jun 12 13:13:23 2008 -0500
+
+ NAND: Always skip blocks on read/write/boot.
+
+ Use of the non-skipping versions was almost always (if not always)
+ an error, and no valid use case has been identified.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit e1c3dbada349992875934575c97b328ab2cb33ca
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Jun 12 11:10:21 2008 -0500
+
+ nand: fsl_upm: convert to updated MTD NAND infrastructure
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 300253306acc72b1b2e9faf0987f86551151d7cf
+Author: Scott Wood <scottwood@freescale.com>
+Date: Thu May 22 15:02:46 2008 -0500
+
+ fsl_elbc_nand: Hard-code the FBAR/FPAR split.
+
+ The hardware has separate registers for block and page-within-block,
+ but the division between the two has no apparent relation to the
+ actual erase block size of the NAND chip.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 9c814b0a716aae884bec977b9a032dfa59cfb79a
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Fri Mar 28 22:10:54 2008 +0300
+
+ fsl_elbc_nand: workaround for hangs during nand write
+
+ Using current driver elbc sometimes hangs during nand write. Reading back
+ last byte helps though (thanks to Scott Wood for the idea).
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 9fd020d6b4b36b9fb67cd834bc1ae7fdba15ee9e
+Author: Scott Wood <scottwood@freescale.com>
+Date: Fri Mar 21 16:12:51 2008 -0500
+
+ Freescale eLBC FCM NAND driver
+
+ This is a driver for the Flash Control Machine of the enhanched Local Bus
+ Controller found on some Freescale chips (such as the mpc8313 and the
+ mpc8379).
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 41ef8c716e93fdf50efe9c1ba733ca6675daaca6
+Author: Scott Wood <scottwood@freescale.com>
+Date: Tue Mar 18 15:29:14 2008 -0500
+
+ Don't panic if a controller driver does ecc its own way.
+
+ Some hardware, such as the enhanced local bus controller used on some
+ mpc83xx chips, does ecc transparently when reading and writing data, rather
+ than providing a generic calculate/correct mechanism that can be exported to
+ the nand subsystem.
+
+ The subsystem should not BUG() when calculate, correct, or hwctl are
+ missing, if the methods that call them have been overridden.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit e52b34d40a8a646e3d11638ea8797e96398dba13
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jan 10 18:47:33 2008 +0100
+
+ NAND: Make NAND driver less verbose per default
+
+ This patch turns off printing of bad blocks per default upon bootup.
+ This can always be shown via the "nand bad" command later.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit fe56a2772e5c59577df906163d0d4b29b056140e
+Author: Sergey Kubushyn <ksi@koi8.net>
+Date: Wed Jan 9 15:36:20 2008 +0100
+
+ NAND: Davinci driver updates
+
+ Here comes a trivial patch to cpu/arm926ejs/davinci/nand.c. Unfortunately I
+ don't have hardware handy so I can not test it at the moment but changes are
+ rather trivial so it should work. It would be nice if somebody with a
+ hardware checked it anyways.
+
+ Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
+
+commit deac913effd8d80535c9ff4687b6fcdff540c554
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 5 16:50:32 2008 +0100
+
+ NAND: Fix compilation warning and small coding style issue
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c568f77acdf896fc3dd6413ce53205b17ba809a3
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 5 16:49:37 2008 +0100
+
+ NAND: Update nand_spl driver to match updated nand subsystem
+
+ This patch changes the NAND booting driver nand_spl/nand_boot.c to match
+ the new infrastructure from the updated NAND subsystem. This NAND
+ subsystem was recently synced again with the Linux 2.6.22 MTD/NAND
+ subsystem.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3df2ece0f0fbba47d27f02fff96c533732b98c14
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 5 16:47:58 2008 +0100
+
+ NAND: Update 4xx NDFC driver to match updated nand subsystem
+
+ This patch changes the 4xx NAND driver ndfc.c to match the new
+ infrastructure from the updated NAND subsystem. This NAND
+ subsystem was recently synced again with the Linux 2.6.22 MTD/NAND
+ subsystem.
+
+ Tested successfully on AMCC Sequoia and Bamboo.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 12072264528eba33737bc9674e19f0e925ffda23
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jan 5 16:43:25 2008 +0100
+
+ NAND: Change nand_wait_ready() to not call nand_wait()
+
+ This patch changes nand_wait_ready() to not just call nand_wait(),
+ since this will send a new command to the NAND chip. We just want to
+ wait for the chip to become ready here.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9ad754fef5053144daed3b007adaf1c9bec654c9
+Author: William Juul <william.juul@datarespons.no>
+Date: Fri Dec 14 16:33:45 2007 +0100
+
+ make nand dump and nand dump.oob work
+
+ Signed-off-by: William Juul <william.juul@tandberg.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 43ea36fb8fdcbc6e26f0caffe808c63633b18838
+Author: William Juul <william.juul@datarespons.no>
+Date: Mon Nov 19 14:46:00 2007 +0100
+
+ moving files from yaffs2/direct/ to yaffs2/ and deleting all symlinks
+
+ Signed-off-by: William Juul <william.juul@tandberg.com>
+
+commit 98824ce3f95e6c4d08d439b779c0acb0048045a6
+Author: William Juul <william.juul@tandberg.com>
+Date: Tue Jun 10 16:18:13 2008 -0500
+
+ Clean out unneeded files
+
+ Signed-off-by: William Juul <william.juul@tandberg.com>
+
+commit ec29a32b5a71b203f7d9087f1f4d786e7f13dd23
+Author: William Juul <william.juul@datarespons.no>
+Date: Fri Nov 16 08:44:27 2007 +0100
+
+ Create symlinks from yaffs2/direct to yaffs2
+
+ Signed-off-by: William Juul <william.juul@tandberg.com>
+
+commit 90ef117b68387d66763291af0117677644166611
+Author: William Juul <william.juul@datarespons.no>
+Date: Thu Nov 15 12:23:57 2007 +0100
+
+ Incorporate yaffs2 into U-boot
+
+ To use YAFFS2 define CONFIG_YAFFS2
+
+ Signed-off-by: William Juul <william.juul@tandberg.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 0e8cc8bd92257da2e1df88cbc985e166e472ce61
+Author: William Juul <william.juul@datarespons.no>
+Date: Thu Nov 15 11:13:05 2007 +0100
+
+ YAFFS2 import
+
+ Direct import of yaffs as a tarball as of 20071113 from their public
+ CVS-web at http://www.aleph1.co.uk/cgi-bin/viewcvs.cgi/yaffs2/
+
+ The code can also be imported on the command line with:
+ export CVSROOT=:pserver:anonymous@cvs.aleph1.co.uk:/home/aleph1/cvs cvs logon
+ (Hit return when asked for a password)
+ cvs checkout yaffs2
+
+ Signed-off-by: William Juul <william.juul@tandberg.com>
+ Signed-off-by: Stig Olsen <stig.olsen@tandberg.com>
+
+commit 3043c045d5a9897faba7d5c7218c2f4d06cd0038
+Author: William Juul <william.juul@datarespons.no>
+Date: Wed Nov 14 14:28:11 2007 +0100
+
+ Whitespace cleanup and marking broken code.
+
+ Changes requested by maintainer Stefan Roese after
+ posting patch to U-boot mailing list.
+
+ Signed-off-by: William Juul <william.juul@tandberg.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 5e1dae5c3db7f4026f31b6a2a81ecd9e9dee475f
+Author: William Juul <william.juul@datarespons.no>
+Date: Fri Nov 9 13:32:30 2007 +0100
+
+ Fixing coding style issues
+
+ - Fixing leading white spaces
+ - Fixing indentation where 4 spaces are used instead of tab
+ - Removing C++ comments (//), wherever I introduced them
+
+ Signed-off-by: William Juul <william.juul@tandberg.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 4cbb651b29cb64d378a06729970e1e153bb605b1
+Author: William Juul <william.juul@datarespons.no>
+Date: Thu Nov 8 10:39:53 2007 +0100
+
+ Remove white space at end.
+
+ Signed-off-by: William Juul <william.juul@tandberg.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit cfa460adfdefcc30d104e1a9ee44994ee349bb7b
+Author: William Juul <william.juul@datarespons.no>
+Date: Wed Oct 31 13:53:06 2007 +0100
+
+ Update MTD to that of Linux 2.6.22.1
+
+ A lot changed in the Linux MTD code, since it was last ported from
+ Linux to U-Boot. This patch takes U-Boot NAND support to the level
+ of Linux 2.6.22.1 and will enable support for very large NAND devices
+ (4KB pages) and ease the compatibility between U-Boot and Linux
+ filesystems.
+
+ This patch is tested on two custom boards with PPC and ARM
+ processors running YAFFS in U-Boot and Linux using gcc-4.1.2
+ cross compilers.
+
+ MAKEALL ppc/arm has some issues:
+ * DOC/OneNand/nand_spl is not building (I have not tried porting
+ these parts, and since I do not have any HW and I am not familiar
+ with this code/HW I think its best left to someone else.)
+
+ Except for the issues mentioned above, I have ported all drivers
+ necessary to run MAKEALL ppc/arm without errors and warnings. Many
+ drivers were trivial to port, but some were not so trivial. The
+ following drivers must be examined carefully and maybe rewritten to
+ some degree:
+ cpu/ppc4xx/ndfc.c
+ cpu/arm926ejs/davinci/nand.c
+ board/delta/nand.c
+ board/zylonite/nand.c
+
+ Signed-off-by: William Juul <william.juul@tandberg.com>
+ Signed-off-by: Stig Olsen <stig.olsen@tandberg.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit cd82919e6c8a73b363a26f34b734923844e52d1c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Aug 12 16:08:38 2008 +0200
+
+ Coding style cleanup, update CHANGELOG, prepare release
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 17e900b8c0f38d922da47073246219dce2a847f2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Aug 12 14:54:04 2008 +0200
+
+ MVBC_P: fix compile problem
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 52b047ae48219b59bebe37ba743ab103fd4f8316
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Aug 12 12:10:11 2008 +0200
+
+ MPC8272ADS: fix build error: 'bd_t' has no member named 'pci_clk'
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c9c101c660b3d1995045c61c7c6041f52b6cf335
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Aug 12 00:36:53 2008 +0200
+
+ ads5121: fix compiler warnings (unused variables)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 902ca09246039964d59bbcb519b1e1b5aed01308
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Aug 11 11:29:28 2008 -0500
+
+ 85xx: Rename CONFIG_NR_CPUS to CONFIG_NUM_CPUS
+
+ Use CONFIG_NUM_CPUS to match existing define used by 86xx.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 3216ca9692ff80d7c638723ef448f3d36301d9e7
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Aug 11 09:20:53 2008 -0500
+
+ Fix fallout from autostart revert
+
+ The autostart revert caused a bit of duplicated code as well as
+ code that was using images->autostart that needs to get removed so
+ we can build again.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3cf8a234b8e8c02e4da1f23566043bc288b05220
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Aug 11 09:16:25 2008 -0500
+
+ Fix compile error related to r8a66597-hcd & usb
+
+ When building the 8544DS board we get this error:
+
+ In file included from r8a66597-hcd.c:22:
+ u-boot/include/usb.h:190:2: error: #error USB Lowlevel not defined
+ make[1]: *** [r8a66597-hcd.o] Error 1
+
+ The cleanest fix is to only build r8a66597-hcd.c if CONFIG_USB_R8A66597_HCD
+ is set.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2d0daa03612338a813e3c9d22680e54eabfea378
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Mon Aug 4 14:02:26 2008 -0500
+
+ POWERPC 86xx: Move BAT setup code to C
+
+ This is needed because we will be possibly be locating
+ devices at physical addresses above 32bits, and the asm
+ preprocessing does not appear to deal with ULL constants
+ properly. We now call write_bat in lib_ppc/bat_rw.c.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 9de67149db576c91b9c2a0a182652331e7e44211
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Mon Aug 4 14:01:53 2008 -0500
+
+ POWERPC: Add synchronization to write_bat in lib_ppc/bat_rw.c
+
+ Perform sync/isync as required by the architecture.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 23f935c073e7578c6066804fd2f9ee116cae6ffe
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Mon Aug 4 14:01:16 2008 -0500
+
+ POWERPC: 86xx - add missing CONFIG_HIGH_BATS to sbc8641d config
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 5276a3584d26a9533404f0ec00c3b61cf9a97939
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Sun Aug 3 21:44:10 2008 +0200
+
+ i.MX31: Fix mx31_gpio_mux() function and MUX_-macros.
+
+ Correct the mx31_gpio_mux() function to allow changing all i.MX31 IOMUX
+ contacts instead of only the first 256 ones as is the case prior to
+ this patch.
+
+ Add missing MUX_* macros and update board files to use the new macros.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit b6b183c5b2fffd4c456b7e3fcb064cceb47fe7ac
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Sun Aug 3 21:43:37 2008 +0200
+
+ i.MX31: Fix IOMUX related typos
+
+ Correct the names of some IOMUX macros.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit 4d57b0fb2927d4f50d834884b4ec4a7ca01708b0
+Author: Steve Sakoman <steve@sakoman.com>
+Date: Mon Aug 11 20:26:16 2008 +0200
+
+ OneNAND: Remove unused parameters to onenand_verify_page
+
+ The block and page parameters of onenand_verify_page() are not used. This causes a compiler error when CONFIG_MTD_ONENAND_VERIFY_WRITE is enabled.
+
+ Signed-off-by: Steve Sakoman <steve@sakoman.com>
+ Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+
+commit e84d568fa2a9f4ce7888141e71676368ef6b3f25
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Fri Aug 8 18:00:40 2008 +0200
+
+ video: fix bug in cfb_console code
+
+ FILL_15BIT_555RGB macro extension for pixel swapping
+ by commit bed53753dd1d7e6bcbea4339be0fb7760214cc35
+ introduced a bug in cfb_console:
+
+ Bitmaps with odd-numbered width won't be rendered
+ correctly and even U-Boot crashes are observed on
+ some platforms while repeated rendering of such
+ bitmaps with "bmp display". Also if a bitmap is
+ rendered to an odd-numbered x starting position,
+ the same problem occurs. This patch is an attempt
+ to fix it.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit d9015f6a50d7258125349ef5c2af836458a0029a
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Fri Aug 8 18:00:39 2008 +0200
+
+ video: fix bug in logo_plot
+
+ If logo_plot() should ever be called with x starting
+ position other than zero and for pixel depths greater
+ than 8bpp, logo colors distortion will be observed.
+ This patch fixes the issue.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 406819ae94f79f5b59e01d163380ca7d83709251
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Aug 11 00:17:52 2008 +0200
+
+ MAINTAINERS: sort entries
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit cfc442d7913d4d1c3a9bf494f90c012c2f8c3bdc
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date: Thu Aug 7 18:19:28 2008 +0800
+
+ Add mpc7448hpc2 maintainer information
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit a9fe0c3e7ca48afa50d6a0db99fa91e7282d73d8
+Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
+Date: Thu Aug 7 13:13:27 2008 +0530
+
+ common/cmd_load.c - Minor code & Coding Style cleanup
+
+ - os_data_header Variable is a carry over feature
+ & unused. So removed all instance of this variable
+ - Minor Code Style Update
+
+ Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0d28f34bbe56d0971bd603789dcc6fe7adf11f14
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Wed Aug 6 19:32:33 2008 +0200
+
+ Update the U-Boot wiki URL.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit aa5ffa16d7e4c461b7b77bf8e79d2ef5638cf754
+Author: dirk.behme@googlemail.com <dirk.behme@googlemail.com>
+Date: Sun Aug 10 17:56:36 2008 +0200
+
+ OneNAND: Remove base address offset usage
+
+ While locally preparing some U-Boot patches for ARM based OMAP3 boards, some
+ using OneNAND and some using NAND, we found some differences in OneNAND and
+ NAND command address handling.
+
+ As this might confuse users (it already confused us), we like to align OneNAND
+ and NAND address handling.
+
+ The issue is that cmd_onenand.c subtracts the onenand base address from the
+ addresses you type into the u-boot command line so, unlike nand, you can't
+ use addresses relative to the start of the onenand part e.g. this won't work:
+
+ onenand read 82000000 280000 400000
+
+ you have to use:
+
+ onenand read 82000000 20280000 400000
+
+ Looking at recent git, the only board currently using OneNAND is Apollon, and
+ for this the OneNAND base address is 0 (apollon.h)
+
+ #define CFG_ONENAND_BASE 0x00000000
+
+ so patch below won't break any existing boards and will align OneNAND and NAND
+ handling on boards where OneNAND base address is != 0.
+
+ Signed-off-by: Steve Sakoman <sakoman@gmail.com>
+ Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
+ Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+
+commit c11528083ef6e55e76df742228c26e39d151813d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Aug 7 09:28:20 2008 -0500
+
+ mpc85xx: workaround old binutils bug
+
+ The recent change to move the .bss outside of the image gives older
+ binutils (ld from eldk4.1/binutils-2.16) some headache:
+
+ ppc_85xx-ld: u-boot: Not enough room for program headers (allocated 3, need 4)
+ ppc_85xx-ld: final link failed: Bad value
+
+ We workaround it by being explicit about the program headers and not
+ assigning the .bss to a program header.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0bf202ec586d4466c900e987720fa635c594d689
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Aug 10 01:26:26 2008 +0200
+
+ Revert "[new uImage] Add autostart flag to bootm_headers structure"
+
+ This reverts commit f5614e7926863bf0225ec860d9b319741a9c4004.
+
+ The commit was based on a misunderstanding of the (documented)
+ meaning of the 'autostart' environment variable. It might cause
+ boards to hang if 'autostart' was used, with the potential to brick
+ them. Go back to the documented behaviour.
+
+ Conflicts:
+
+ common/cmd_bootm.c
+ common/image.c
+ include/image.h
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 29f8f58ff40c67f7f2e11afd1715173094e52ac2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Aug 9 23:17:32 2008 +0200
+
+ TQM8xx{L,M}: try to normalize config files for TQM8xx? based board
+
+ - enable CFI driver where this was forgotten
+ - enable mtdparts support
+ - adjust default environment
+ etc.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 41266c9b5a5f873df3ec891bb0907616958b5602
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Tue Aug 5 10:51:57 2008 -0500
+
+ FIT: Fix handling of images without ramdisks
+
+ boot_get_ramdisk() should not treat the case when a FIT image does
+ not contain a ramdisk as an error.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+ Acked-by: Michal Simek <monstr@monstr.eu>
+
+commit f77d92a3f56d88e63cc02226a1204b3bdbac6961
+Author: Sergey Lapin <slapin@ossfans.org>
+Date: Sat Aug 9 01:39:09 2008 +0400
+
+ DataFlash: AT45DB021 fix and AT45DB081 support
+
+ Fix for page size of AT45DB021. Also adding bigger AT45DB081
+ which comes with some newer boards.
+
+ Signed-off-by: Sergey Lapin <slapin@ossfans.org>
+
+commit ba9324451b662dd393afa53e5cc36fc5d3d10966
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Fri Aug 8 16:30:23 2008 +0900
+
+ sh: Update sh7763rdp config
+
+ Add sh_eth support to sh7763rdp.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+
+commit 21f971ec265f6042ec21636d55d06a6bc0751077
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 7 01:22:29 2008 +0200
+
+ TQM823L: re-enable logo support; update LCD_INFO text
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3b8d17f0f082073346c0df017c9dfd6acdb40d6d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Aug 8 16:41:56 2008 +0200
+
+ TQM8xxL: fix support for second flash bank
+
+ When switching the TQM8xxL modules to use the CFI flash driver,
+ support for the second flash bank was broken because the CFI driver
+ did not support dynamically sized banks. This gets fixed now.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2a112b234d879f6390503a5f4e38246acce9d0b0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Aug 8 16:39:54 2008 +0200
+
+ CFI: allow for dynamically determined flash sizes and addresses
+
+ The CFI driver allowed only for static initializers in the
+ CFG_FLASH_BANKS_LIST definition, i. e. it did not allow to map
+ several flash banks contiguously if the bank sizes were not known in
+ advance, which kind of violates U-Boot's design philosophy.
+
+ (will be used for example by the TQM8xxL boards)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d9d78ee46d9a396d0a81d00c2b003a9bd32c2e61
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Thu Aug 7 23:26:35 2008 -0700
+
+ QE UEC: Fix compiler warnings
+
+ Moved static functions earlier in file so forward declarations are not needed.
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d5d28fe4aad5f4535400647a5617c11039506467
+Author: David Saada <David.Saada@ecitele.com>
+Date: Mon Mar 31 02:37:38 2008 -0700
+
+ QE UEC: Add MII Commands
+
+ Add MII commands to the UEC driver. Note that once a UEC device is selected,
+ any device on its MDIO bus can be addressed.
+
+ Signed-off-by: David Saada <david.saada@ecitele.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit fd0f2f3796ff2a7a32d35deb1b7996e485849df7
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Wed Jul 9 21:07:38 2008 +0900
+
+ usb: add support for R8A66597 usb controller
+
+ add support for Renesas R8A66597 usb controller.
+ This patch supports USB Host mode.
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 1d10dcd041aaeae9fd7c821005692898a0303382
+Author: Hunter, Jon <jon-hunter@ti.com>
+Date: Sat Jul 26 18:59:16 2008 -0500
+
+ Add support for OMAP5912 and OMAP16xx to usbdcore_omap1510.c
+
+ Add support to drivers/usb/usbdcore_omap1510.c for OMAP5912 and OMAP16xx devices.
+
+ Signed-off-by: Jon Hunter <jon-hunter@ti.com>
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit eab1007334b93a6209f1ec33615e26ef5311ede7
+Author: Steven A. Falco <sfalco@harris.com>
+Date: Wed Aug 6 15:42:52 2008 -0400
+
+ ppc4xx: Sequoia has two UARTs in "4-pin" mode. Configure the GPIOs as per schematic.
+
+ The Sequoia board has two UARTs in "4-pin" mode. This patch modifies the GPIO
+ configuration to match the schematic, and also sets the SDR0_PFC1 register to
+ select the corresponding mode for the UARTs.
+
+ Signed-off-by: Steven A. Falco <sfalco@harris.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0eb5717a85b6cba3f67c11fa89bdde38dcd081b5
+Author: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
+Date: Wed Aug 6 14:42:13 2008 +0200
+
+ avr32: add support for EarthLCD Favr-32 board
+
+ This patch adds support for the Favr-32 board made by EarthLCD.
+
+ This kit, which is also called ezLCD-101 when running with EarthLCD firmware,
+ has a 10.4" touch screen LCD panel, 16 MB 32-bit SDRAM, 8 MB parallel flash,
+ Ethernet, audio out, USB device, SD-card slot, USART and various other
+ connectors for cennecting stuff to SPI, I2C, GPIO, etc.
+
+ Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit bc9019e19758a19a388fb20ef18dc771cd39fdda
+Author: Rafael Campos <rafael.campos@hanscan.com>
+Date: Thu Jul 31 10:22:20 2008 +0200
+
+ cfi-flash: Added support to flash_real_protect for Atmel flash devices
+
+ Some of the flash memories produced by ATMEL start in read-only mode.
+ We need to unprotect it. This patch allows the AT49BV6416 to work with
+ cfi_flash memories. Tested in the at91rm9200ek board.
+
+ Signed-off-by: Rafael Campos Las Heras <rafael.campos@hanscan.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7949839e5836bf8b1074bb6142c46d30ac3aa350
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Tue Aug 5 15:36:39 2008 +0200
+
+ cfi-flash: Add definition for the AM29LV800BB AMD NOR-flash
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1318673045fe188c6e24c582b1e6efc00ae1c62c
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Aug 6 14:06:03 2008 +0200
+
+ Fix merge problems
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f2302d4430e7f3f48308d6a585320fe96af8afbd
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Aug 6 14:05:38 2008 +0200
+
+ Fix merge problems
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6689484ccd43189322aaa5a1c6cd02cdd511ad7d
+Author: Kenneth Johansson <kenneth@southpole.se>
+Date: Tue Jul 15 12:13:38 2008 +0200
+
+ mpc5121: Move iopin features from board specific to common files.
+
+ And in the process eliminate some duplicate register defines.
+
+ Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
+
+commit ef11df6b66ecf5797e94ba322254b8fb7a4e2e12
+Author: John Rigby <jrigby@freescale.com>
+Date: Tue Aug 5 17:38:57 2008 -0600
+
+ mpc5121: squash some fdt fixup errors
+
+ On ADS5121 when booting linux the following errors are seen:
+ Unable to update property /soc5121@80000000:bus-frequency, err=FDT_ERR_NOTFOUND
+ Unable to update property /soc5121@80000000/ethernet@2800:local-mac-address, err=FDT_ERR_NOTFOUND
+ Unable to update property /soc5121@80000000/ethernet@2800:address, err=FDT_ERR_NOTFOUND
+
+ This is caused by ft_cpu_setup trying to deal with
+ both old and new soc node naming. This patch
+ fixes this by being smarter about what to
+ fixup.
+
+ Also do soc node fixups by compatible instead of by path.
+ A new board config called OF_SOC_COMPAT defined
+ to be "fsl,mpc5121-immr" replaces the old
+ OF_SOC node path that was defined to be "soc@80000000".
+
+ Old device trees still work, but the compatiblity
+ is conditional on CONFIG_OF_SUPPORT_OLD_DEVICE_TREES
+ which is on by default in include/configs/ads5121.h.
+
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit 81091f58f0c58ecd26c5b05de2ae20ca6cdb521c
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 2 23:48:30 2008 +0200
+
+ drivers/serial: Move conditional compilation to Makefile for CONFIG_* macros
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 4cd7e6528f61ec669755c3754bb4f9779874fab3
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 2 23:48:32 2008 +0200
+
+ nios2/sysid: fix printf warning
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 66da6fa0e35e7ee56628c85981709afe7180fc8e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 2 23:48:33 2008 +0200
+
+ Fix remaining build issues with MPC8xx FADS boards.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 81d3f1fdddafd1eb53bbca8739f488d417eb3dd2
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 2 23:48:31 2008 +0200
+
+ nios2: fix phys_addr_t and phys_size_t support
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 5fa62000db6d0b46ecdeadbeb50faf5197db49ef
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Aug 2 23:48:34 2008 +0200
+
+ mvbc_p: Fix problem with '#if (CONFIG_CMD_KGDB)'
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1464eff77e7fdaed609ecf263a2423c9dcf96b1f
+Author: Mark Jackson <mpfj@mimc.co.uk>
+Date: Fri Aug 1 09:48:29 2008 +0100
+
+ Fix bitmap display for atmel lcd controller
+
+ The current lcd_display_bitmap() function does not work properly
+ for the Atmel LCD controller.
+
+ 2 fixes need to be done:-
+
+ (a) when setting the colour map, use the lcd_setcolreg() function
+ as provided by the Atmel driver
+ (b) the data is never actually written to the lcd framebuffer !!
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+
+commit 2a433c66b1e2770349fe4911be23c375f053ebd8
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Aug 1 08:40:34 2008 +0200
+
+ qemu_mips: update README to follow qemu update about default machine
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ac169d645f5f0e0b9a232563099209e92a355d8e
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 31 19:53:21 2008 -0500
+
+ ColdFire: Fix compilation issue caused by a missing function
+
+ Implement usec2ticks() which is used by fsl_i2c.c in
+ lib_m68k/time.c
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 01ae85b58b51d2fb1fac5b93095f6042cf48ae7b
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 31 19:53:06 2008 -0500
+
+ Fix compilation error for TASREG
+
+ TASREG is ColdFire platform, the include ppc4xx.h in
+ board/esd/common/flash.c causes conflict.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 35d3bd3cc35c508a6823dac77e0fd126808e4fc7
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 31 19:52:36 2008 -0500
+
+ Fix compilation error for MCF5275
+
+ Rename OBJ to COBJ in board/platform/Makefile
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 5c40548f01218360a1f1395198c50ff45f3035b5
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Jul 31 19:52:28 2008 -0500
+
+ Fix compile error caused by incorrect function return type
+
+ Rename int mii_init(void) to void mii_init(void) for idmr
+ ColdFire platform
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit a58c78067c928976c082c758d3987e89ead5b191
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Aug 1 12:06:22 2008 +0200
+
+ Fix build issues with MPC8xx FADS boards.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4b50cd12a3b3c644153c4cf393f4a4c12289e5aa
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 31 17:54:03 2008 +0200
+
+ Prepare v1.3.4-rc2: update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a48311557db6e7e9473a6163b44bb1e6c6ed64c4
+Author: Mark Jackson <mpfj@mimc.co.uk>
+Date: Thu Jul 31 16:09:00 2008 +0100
+
+ Add gzipped logo support
+
+ The README file states that CONFIG_VIDEO_BMP_GZIP behaves as follows:
+
+ If this option is set, additionally to standard BMP
+ images, gzipped BMP images can be displayed via the
+ splashscreen support or the bmp command.
+
+ However, the splashscreen function *only* supports standard BMP images.
+
+ This patch adds the documented gzip support.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+
+commit a5bcb01fbde6b1f1c9863cd86e5c4c369f0121ac
+Author: Mark Jackson <mpfj@mimc.co.uk>
+Date: Thu Jul 31 15:56:48 2008 +0100
+
+ Fix Atmel LCD controller endianess for AVR32 processors
+
+ The Atmel lcd controller is used on Atmel's AT91 (little endian) and
+ AVR32 (big endian) platforms.
+
+ As such, the controller can handle both big and little endian memory.
+
+ This patch fixes the driver for the AVR32 platform.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+
+commit cdb8bd2fd3bcbe65d8e4334a55f5a667845426a1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Jul 31 15:56:01 2008 +0200
+
+ apollon: fix build out of tree
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2e752be39d3e398d4ab89ffa6634c397df298297
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Thu Jul 31 12:35:04 2008 +0200
+
+ Uncompressed images loaded to their start address shall set load_end too
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit c37207d7f51e19c17f859966f314e27cc1231801
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jul 16 16:38:59 2008 +0200
+
+ Fix printf() format problems with configurable prompts
+
+ U-Boot allows for configurable prompt strings using the
+ CONFIG_AUTOBOOT_PROMPT resp. CONFIG_MENUPROMPT definitions. So far,
+ the assumption was that any such user defined problts would contain
+ exactly one "%d" format specifier. But some boards did not.
+
+ To allow for flexible boot prompts without adding too complex code we
+ now allow to specify the whole list of printf() arguments in the user
+ definition. This is powerful, but requires a responsible user who
+ really understands what he is doing, as he needs to know for exanple
+ which variables are available in the respective context.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 54754120637b6a7f4ff774fb199fc550bcfea1da
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 31 17:02:14 2008 +0200
+
+ TQM85xx: fix typo introduce by commit ffbb5cb9
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0b4951d4cddca9cc800745891c95b291e47cbbd7
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 31 15:27:01 2008 +0200
+
+ mvbc_p board: fix most build warnings.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c4ec6db074051d2f6fc76a66411c60621b22bc02
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 31 13:57:20 2008 +0200
+
+ E1000: clean up CONFIG_E1000_FALLBACK_MAC handling
+
+ Avoid "integer constant is too large for 'long' type" warnings.
+ And simplify the code.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9196b44334c330cc13de2464c59181e4db71f549
+Author: Matvejchikov Ilya <matvejchikov@gmail.com>
+Date: Wed Jul 30 23:21:19 2008 +0400
+
+ 8260: Making the use of gd->pci_clk dependant on the CONFIG_PCI
+
+ Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
+
+commit 6361ad4b596f5a940a01c91ae0297d98f790cbe0
+Author: Matvejchikov Ilya <matvejchikov@gmail.com>
+Date: Wed Jul 30 23:20:32 2008 +0400
+
+ PPC: Add pci_clk in the global_data for CPM2 processors
+
+ This patch adds pci_clk field to the global_data structure for the
+ processors which have CPM2 module in case the CONFIG_PCI is defined.
+
+ Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
+
+commit f0ff885ca64655bee6540eb8a25eed90b1152686
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jul 30 14:13:30 2008 -0500
+
+ mpc85xx: Update linker scripts for Freescale boards
+
+ * Move to using absolute addressing always. Makes the scripts a bit more
+ portable and common
+ * Moved .bss after the end of the image. These allows us to have more
+ room in the resulting binary image for code and data.
+ * Removed .text object files that aren't really needed
+ * Make sure _end is 4-byte aligned as the .bss init code expects this.
+ (Its possible that the end of .bss isn't 4-byte aligned)
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 57c219ad5d34dd9d49991777a62e3899595f2ec7
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jul 30 08:01:15 2008 -0500
+
+ Fix compile warnings in dlmalloc
+
+ The origional code was using on odd reference to get to the first
+ real element in av_[]. The first two elements of the array are
+ not used for actual bins, but for house keeping. If we are more
+ explicit about how use the first few elements we can get rid of the
+ warnings:
+
+ dlmalloc.c: In function 'malloc_extend_top':
+ dlmalloc.c:1971: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ dlmalloc.c:1999: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ dlmalloc.c:2029: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ ...
+
+ The logic of how this code came to be is:
+ bin_at(0) = (char*)&(av_[2]) - 2*SIZE_SZ
+
+ SIZE_SZ is the size of pointer, and av_ is arry of pointers so:
+ bin_at(0) = &(av_[0])
+
+ Going from there to bin_at(0)->fd or bin_at(0)->size should be straight forward.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3f9ae1a5d43c49a8ecf497470c3d1d80255e44b9
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jul 30 10:21:01 2008 +0200
+
+ ppc4xx: Fix W7OLMG compile problems by adding missing LM75 defines
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ebb86c4ecd37a7701358284e497ca4c6483c7cc5
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jul 30 09:59:51 2008 +0200
+
+ cmd_bootm.c: Fix problem with '#if (CONFIG_CMD_USB)'
+
+ A recent patch used '#if (CONFIG_CMD_USB)' instead of
+ '#if defined(CONFIG_CMD_USB)'. This patch fixes this problem and makes
+ common/bootm.c compile again.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Acked-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 2cb9080427fe641dcb71da46cd0634dd406f37ed
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Tue Jul 22 08:01:43 2008 +0900
+
+ Remove unused I2C at apollon board
+
+ There are no I2C devices on this board.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 3c95960e526b3b026da20201db64526f46faf14b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 31 10:12:09 2008 +0200
+
+ at91rm9200dk, csb637: fix NAND related build problems
+
+ Tried fixing NAND support for the at91rm9200dk board; untested.
+ Disabled NAND support in the csb637 board config file.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9246f5ecfd353ae297a02ffd5328402acf16c9dd
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Wed Jul 30 12:39:28 2008 +0200
+
+ ppc4xx: ML507: Environment in flash and MTD Support
+
+ - Relocate the location of U-Boot in the flash
+ - Save the environment in one sector of the flash memory
+ - MTD Support
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a8a16af4d59d14cc1c1187c10aaad80d6b8394b5
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Tue Jul 29 17:16:10 2008 +0200
+
+ ppc4xx: ML507: Use of get_ram_size in board ml507
+
+ - Change suggested by WD
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 01a004313c5ec2d128b611df4c208b1b0d3c3fb4
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Mon Jul 21 20:30:07 2008 +0200
+
+ ppc4xx: ML507: U-Boot in flash and System ACE
+
+ This patch allows booting from FLASH the ML507 board by Xilinx.
+ Previously, U-Boot needed to be loaded from JTAG or a Sytem ACE CF
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5c374c9ee16fee2bf68533cc4010b3c0df21f783
+Author: Julien May <mailinglist@miromico.ch>
+Date: Mon Jun 23 13:57:52 2008 +0200
+
+ Add support for the hammerhead (AVR32) board
+
+ The Hammerhead platform is built around a AVR32 32-bit microcontroller
+ from Atmel. It offers versatile peripherals, such as ethernet, usb
+ device, usb host etc.
+
+ The board also incooperates a power supply and is a Power over Ethernet
+ (PoE) Powered Device (PD).
+
+ Additonally, a Cyclone III FPGA from Altera is integrated on the board.
+ The FPGA is mapped into the 32-bit AVR memory bus. The FPGA offers two
+ DDR2 SDRAM interfaces, which will cover even the most exceptional need
+ of memory bandwidth. Together with the onboard video decoder the board
+ is ready for video processing.
+
+ For more information see: http:///www.miromico.com/hammerhead
+
+ Signed-off-by: Julien May <mailinglist@miromico.ch>
+ [haavard.skinnemoen@atmel.com: various small fixes and adaptions]
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 09d318a8bb1444ec92e31cafcdba877eb9409e58
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Jul 29 12:23:49 2008 -0500
+
+ fsl_i2c: Use timebase timer functions instead of get_timer()
+
+ The current implementation of get_timer() is only really useful after we
+ have relocated u-boot to memory. The i2c code is used before that as part
+ of the SPD DDR setup.
+
+ We actually have a bug when using the get_timer() code before relocation
+ because the .bss hasn't been setup and thus we could be reading/writing
+ a random location (probably in flash).
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 4fc72a0d6ca85070a5e90d76cc5a853526ac09c4
+Author: Frank Svendsbøe <frank.svendsboe@gmail.com>
+Date: Tue Jul 29 14:49:31 2008 +0200
+
+ Adder8xx: Fix CFG_MONITOR_LEN
+
+ Due to increased space usage, U-Boot can no longer be stored in three sectors.
+ The current U-Boot use just over three flash sectors (197k), and U-Boot will
+ become corrupt after saving environment variables. This patch adds another 64k
+ to CFG_MONITOR_LEN.
+
+ Signed-off-by: Frank E. Svendsbøe <frank.svendsboe@gmail.com>
+
+commit a4c59ad4a21140550ada6f97690d2527c4146ce5
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Tue Jul 29 08:47:57 2008 +0900
+
+ Add OneNAND IPL related files to gitignore
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 8d87589e8e874df7120a3d9667f051bc33bac250
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Mon Jul 28 20:38:25 2008 +0200
+
+ API: Teach the storage layer about SATA and MMC options.
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+ Acked-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 6b73b754f782e1ecce5048bf20b22ce56a07a5b8
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Mon Jul 28 20:37:48 2008 +0200
+
+ API: Dump contents of sector 0 in the demo application.
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+ Acked-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 13ca6305f2eba49c175f6370c35286141059c789
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Mon Jul 28 20:37:10 2008 +0200
+
+ API: Correct storage enumeration routine, other minor fixes in API storage area.
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+ Acked-by: Rafal Jaworowski <raj@semihalf.com>
+
+commit 05c7fe0f049b1c9eb9a1992f27e5e350d865f4a8
+Author: Rafal Jaworowski <raj@semihalf.com>
+Date: Mon Jul 28 20:36:19 2008 +0200
+
+ API: Fix compilation warnings in api_examples/demo.c.
+
+ Signed-off-by: Rafal Czubak <rcz@semihalf.com>
+
+commit c14eefcc48212af2f3314809605698dd8393a90a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Jul 27 17:09:43 2008 +0200
+
+ Fix more printf() format warnings
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 936897d4d1365452bbbdf8430db5e7769ef08d38
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Jul 25 15:18:16 2008 +0200
+
+ Fix remaining CFG_CMD_ define, ifdef and comments
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 5d1d00fb36005482e1803a00ddc46efa11d719af
+Author: Stefano Babic <sbabic@denx.de>
+Date: Fri Jul 25 08:57:40 2008 +0200
+
+ Add include for config.h in command.h.
+
+ Because the cmd_tbl_s structure depends on the configuration file, it
+ must be assured that config.h is included before the structure is
+ evaluated by the compiler. If this is not certain, it could happen
+ that the compiler generates structures of different size, depending
+ on the fact if the source file includes <config.h> before or after
+ <command.h>.
+
+ The effect is that u-boot crashes when tries to relocate the command
+ table (for ppc) or try to access to the command table for other
+ architectures.
+
+ The problem can happen on board-depending commands. All general
+ commands under /common are unaffected, because they include already
+ config.h before command.h.
+
+ Signed-off-by: Stefano Babic <sbabic@denx.de>
+
+commit 2dacb734bac9dba1db9e704d3e0b200ef521c79a
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Jul 23 13:16:06 2008 -0500
+
+ NAND: $(obj)-qualify ecc.h in kilauea NAND boot Makefile.
+
+ This fixes building out-of-tree.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 36d59bd9da9e15d19b867b48449408830f4e2ad5
+Author: Heiko Schocher <hs@denx.de>
+Date: Wed Jul 23 07:30:46 2008 +0200
+
+ Fix warnings if compiling with IDE support.
+
+ cmd_ide.c:827: Warnung: weak declaration of `ide_outb' after first use results in unspecified behavior
+ cmd_ide.c:839: Warnung: weak declaration of `ide_inb' after first use results in unspecified behavior
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 7610db17fd4d59c51d825488526d85ede2f06767
+Author: Adrian Filipi <adrian.filipi@eurotech.com>
+Date: Tue Jul 22 14:28:11 2008 -0400
+
+ Removed support for the adsvix board.
+
+ Support for the adsvix was originally provided by Applied Data
+ Systems (ADS), inc., now EuroTech, Inc.
+ The board never shipped aside from some sample boards.
+
+ Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
+
+commit f96b44cef897bd372beb86dde1b33637c119d84d
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Tue Jul 22 16:22:11 2008 +0200
+
+ ARM: set GD_FLG_RELOC for boards skipping relocation to RAM
+
+ If CONFIG_SKIP_RELOCATE_UBOOT is set the flag GD_FLG_RELOC is usually
+ never set, because relocation to RAM is actually never done by U-boot
+ itself. However, several pieces of code check if this flag is set at
+ some time.
+
+ So, to make sure this flag is set on boards skipping relocation, this
+ is added to the initialisation of U-boot at a moment where it is safe
+ to do so.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit e4dafff86f289b5677143a3e41da7b45c6d27fc7
+Author: Timur Tabi <timur@freescale.com>
+Date: Mon Jul 21 14:26:23 2008 -0500
+
+ fsl-i2c: fix writes to data segment before relocation
+
+ Prevent i2c_init() in fsl_i2c.c from writing to the data segment before
+ relocation. Commit d8c82db4 added the ability for i2c_init() to program the
+ I2C bus speed and save the value in i2c_bus_speed[], which is a global
+ variable. It is an error to write to the data segment before relocation,
+ which is what i2c_init() does when it stores the bus speed in i2c_bus_speed[].
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit dbd32387920e5ad6f9dd58a7b5012bbabe2a6a21
+Author: Wolfgang Ocker <weo@reccoware.de>
+Date: Mon Jul 28 16:56:51 2008 +0200
+
+ mips: Fix baudrate divisor computation on alchemy cpus
+
+ Use CFG_MIPS_TIMER_FREQ when computing the baudrate divisor
+ on alchemy cpus.
+
+ Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit c8c845cfdc6d0217135c1d5927eebd2b133a3314
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sat Jul 5 00:08:48 2008 -0700
+
+ Moved initialization of AVR32 Ethernet controllers to board_eth_init()
+
+ Renamed initialization functions for atngw100 and atstk1000.
+ Removed initializations for these boards from net/eth.c
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit a229d291f33308ab7761d39f25fa1a53c0fc00a2
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed Jul 23 10:55:46 2008 +0200
+
+ spi flash: Fix printf() format warnings
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 252a5e0738bcafaf25f7fbb40f19a59abc2cb13e
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed Jul 23 10:55:31 2008 +0200
+
+ atmel_mci: Fix printf() format warnings
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 7f4b009f4232d57084ce0ec5aeb3b57bccb08e4c
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed Jul 23 10:55:15 2008 +0200
+
+ avr32: Fix printf() format warnings
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit a79c3e8d9c31db25d5ca3ec8e08a97f323410dd4
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed Jul 23 10:52:19 2008 +0200
+
+ avr32: asm/io.h needs asm/types.h
+
+ map_physmem() takes a phys_addr_t as parameter. This type is defined in
+ asm/types.h, so we need to include that file.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 1953d128fd07f07d1c3810a28c0863ea64dae1b6
+Author: Michal Simek <monstr@monstr.eu>
+Date: Thu Jul 17 12:25:46 2008 +0200
+
+ microblaze: Fix printf() format issues
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit de2a07e534f18b1ca5f9869a4ef0604ca829cff0
+Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
+Date: Thu Jul 17 07:27:51 2008 +0530
+
+ Remove unused code from lib_arm/bootm.c
+
+ Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
+
+commit ffbb5cb942e9856fa24e946977e0a60c64df04ab
+Author: Detlev Zundel <dzu@denx.de>
+Date: Wed Jul 16 18:56:45 2008 +0200
+
+ tqm85xx: Demystify 'DK: !!!' comment
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit b2f44ba570f3a01113bbb745daf46f3858d22f53
+Author: Detlev Zundel <dzu@denx.de>
+Date: Wed Jul 16 18:56:44 2008 +0200
+
+ 83xx/85xx/86xx: Add LTEDR local bus definitions
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit f13f64cf42d5abec3e0f920233f6a7a61e7ae494
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Wed Jul 16 16:22:32 2008 +0200
+
+ serial_xuartlite.c: fix compiler warnings
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 86446d3a5d9d3ca81e85d1ccd3accaaae6f8e3c9
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jul 18 11:03:35 2008 +0200
+
+ POST: Add disable interrupts in some of the missing CPU POST tests
+
+ Some CPU POST tests did not disable the interrupts while running. This
+ seems to be necessary to protect this self modifying code.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 97a3bf268d096e0e97e54048448c35114edcf557
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jul 18 10:43:24 2008 +0200
+
+ ide: Use CFG_64BIT_LBA instead of CFG_64BIT_STRTOUL
+
+ This is needed for boards that define CFG_64BIT_STRTOUL but don't define
+ CFG_64BIT_LBA.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0043ac55024963295fc79b39af85b6dc3b261e17
+Author: Niklaus Giger <niklaus.giger@netstal.com>
+Date: Fri Jul 18 11:22:23 2008 +0200
+
+ POST PPC4xx/spr IVPR only if PPC440
+
+ The SPR IVPR register is only present (as far as I know) for
+ processors with a PPC440 core.
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 1092fbd64748dfa2e979b102611ece9bc5ec1855
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jul 18 10:42:29 2008 +0200
+
+ ppc4xx: Enable 64bit printf format on 440/460 platforms
+
+ This patch defines CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL for all
+ 440/460 platforms. This may be needed since those platforms support
+ 36bit physical address space.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 66fe183b1dd9c7534605147a8ecfed1c02345ee5
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jul 18 15:57:23 2008 +0200
+
+ ppc4xx: Fix incorrect MODTx setup for some DIMM configurations
+
+ This patch fixes a problem with incorrect MODTx (On Die Termination)
+ setup for a configuration with multiple DIMM's and multiple ranks.
+ Without this change Katmai was unable to boot Linux with DDR2 frequency
+ >= 533MHz and mem>=3GB. With this patch Katmai successfully boots Linux
+ with DDR2 frequency = 640MHz and mem=4GB.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 60204d06ed9f8c2a67cc79eb67fd2b1d22bcbc8c
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jul 18 12:24:41 2008 +0200
+
+ ppc4xx: Minor coding style cleanup of Xilinx Virtex5 ml507 support
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 086511fc96a8a9bb56e5e19a3d84c40f4dba80cc
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Thu Jul 17 12:47:09 2008 +0200
+
+ ppc4xx: ML507 Board Support
+
+ The Xilinx ML507 Board is a Virtex 5 prototyping board that includes,
+ among others:
+ -Virtex 5 FX FPGA (With a ppc440x5 in it)
+ -256MB of SDRAM2
+ -32MB of Flash
+ -I2C Eeprom
+ -System ACE chip
+ -Serial ATA connectors
+ -RS232 Level Conversors
+ -Ethernet Transceiver
+
+ This patch gives support to a standard design produced by EDK for this
+ board: ppc440, uartlite, xilinx_int and flash
+
+ - Includes Changes propossed by Stefan Roese and Michal Simek
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit d865fd09809a3a18669f35f970781820af40e4de
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Thu Jul 17 11:44:12 2008 +0200
+
+ ppc4xx: CPU PPC440x5 on Virtex5 FX
+
+ -This patchs gives support for the embbedded ppc440
+ on the Virtex5 FPGAs
+ -interrupts.c divided in uic.c and interrupts.c
+ -xilinx_irq.c for xilinx interrupt controller
+ -Include modifications propossed by Stefan Roese
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 340ccb260f21516be360745d5c5e3bd0657698df
+Author: Sebastian Siewior <bigeasy@linutronix.de>
+Date: Wed Jul 16 20:04:49 2008 +0200
+
+ cfi_flash: fix flash on BE machines with CFG_WRITE_SWAPPED_DATA
+
+ This got broken by commits 93c56f212c
+ [cfi_flash: support of long cmd in U-boot.]
+
+ That command needs to be in little endian format on BE machines
+ with CFG_WRITE_SWAPPED_DATA. Without this patch, the command 0xf0
+ gets saved on stack as 0x00 00 00 f0 and 0x00 gets written into
+ the cmdbuf in case portwidth = chipwidth = 8bit.
+
+ Cc: Alexey Korolev <akorolev@infradead.org>
+ Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
+ Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
+
+commit 11188d55bc16dd907451c00282e00a038f73dd62
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jul 17 10:40:51 2008 +0200
+
+ ppc4xx: Fix alphabetical order in 4xx Makefile part (redwood)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 021f6df6e96af5b387810cf96d24848da1faa55c
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu Jul 10 17:20:51 2008 +0400
+
+ 83xx: mpc8315erdb: fix silly thinko in fdt_tsec1_fixup
+
+ The thinko was quite silly indeed, I messed with !ptr. Normally this
+ would trigger some fault, but in U-Boot NULL pointer is equal to phys
+ 0, so the code was working still, just didn't actually test mpc8315erdb
+ environment variable value. Heh.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 25f5f0d49a3ae89bf4396f2557ce98debfef21da
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Tue Jul 8 21:00:04 2008 +0400
+
+ 83xx: mpc8315erdb: add support for switching between ULPI/UTMI USB PHYs
+
+ Freescale ships MPC8315E-RDB boards either with TSEC1 and USB UTMI
+ support, or without TSEC1 but with USB ULPI PHY support in addition.
+ With this patch user can specify desired USB PHY.
+
+ Also, it seems that we can't distinguish the two boards in software, so
+ user have to set `mpc8315erdb' environment variable to either 'tsec1'
+ (TSEC1 enabled) or `ulpi' (board with ULPI PHY, TSEC1 disabled), so that
+ Linux will not probe for TSEC1.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 015b27b9e165fcf220e42f2c4afbaeaa2758fcf6
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Tue Jul 8 20:59:43 2008 +0400
+
+ fdt_support: fdt_fixup_dr_usb: add support for phy_type fixups
+
+ Currently U-Boot can only fixup the usb dr_mode, but some boards (namely
+ MPC8315E-RDB) can use two PHY types: ULPI (stand-alone OTG port) or UTMI
+ (connected to the four-ports hub, usb host only).
+
+ This patch implements support for passing Dual-Role USB controller's
+ device tree property phy_type through the usb_phy_type environment
+ variable.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 699f05125509249072a0b865c8d35520d97cd501
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Jul 15 22:22:44 2008 +0200
+
+ Prepare v1.3.4-rc1: Code cleanup, update CHANGELOG, sort Makefile
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit bcab74baa6b1b1c969038ab6f64a186239180405
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Tue Jul 15 11:23:02 2008 -0400
+
+ Round the serial port clock divisor value returned by calc_divisor()
+
+ Round the serial port clock divisor value returned by
+ calc_divisor()
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 0328ef0edfe950f0b7b8b368dae482531506b74a
+Author: Robin Getz <rgetz@blackfin.uclinux.org>
+Date: Tue Jul 15 21:44:46 2008 +0200
+
+ Fix DHCP protocol so U-Boot does not respond too early
+ on the network with it's offered IP number; it should not reply until
+ after it has received a DHCP ACK message. Also ensures that U-Boot
+ does it's DHCPREQUEST as broadcast (per RFC 2131).
+
+ Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 7288f972fcaee14a9741cb08c8688a23874b4a2e
+Author: Sebastian Siewior <bigeasy@linutronix.de>
+Date: Tue Jul 15 13:35:23 2008 +0200
+
+ cfi_flash: make the command u32 only
+
+ This got changed by commit 93c56f212c
+ [cfi_flash: support of long cmd in U-boot.]
+
+ Long is the wrong type because it will behave differently on 64bit
+ machines in a way that is probably not expected. u32 should be
+ enough.
+
+ Cc: Alexey Korolev <akorolev@infradead.org>
+ Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
+ Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
+
+commit 31cfe57491b183acae575d486729e158f016c27b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Jul 14 23:48:41 2008 +0200
+
+ tools/gitignore: update to all generated files
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 5e0de0e216b8fb27634afb11c60a2fa24c23349e
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Wed Jul 9 18:30:44 2008 +0200
+
+ mpc5xxx: Add MVBC_P board support
+
+ The MVBC_P is a MPC5200B based camera system with Intel Gigabit ethernet
+ controller (using e1000) and custom Altera Cyclone-II FPGA on PCI.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit e2d31fb3450653115452144363d5bde4e5e3e693
+Author: Timur Tabi <timur@freescale.com>
+Date: Thu Jun 19 17:56:11 2008 -0500
+
+ Update Freescale sys_eeprom.c to handle CCID formats
+
+ Update the sys_eeprom.c file to handle both NXID and CCID EEPROM formats. The
+ NXID format replaces the older CCID format, but it's important to support both
+ since most boards out there still use the CCID format. This change is in
+ preparation for using one file to handle both formats. This will also unify
+ EEPROM support for all Freescale 85xx and 86xx boards.
+
+ Also update the 86xx board header files to use the standard CFG_I2C_EEPROM_ADDR
+ instead of ID_EEPROM_ADDR.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit d85f46a25ccb33ed9b295de3c2cfe1ce270ece9a
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Fri Jul 11 17:22:43 2008 +0900
+
+ pci: sh: Add pci_skip_dev and pci_print_dev function
+
+ Add function of new PCI, pci_skip_dev and pci_print_dev.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 1107014e835ec9d46c0333f4211d104f77442db0
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Jul 14 20:29:07 2008 -0500
+
+ Clean up INIT_RAM options
+
+ The L2_INIT_RAM option was unused, and recent changes to the TLB code
+ meant that the INIT_RAM TLBs weren't being cleared out. In order to reduce
+ the amount of mapped space attached to nothing, we change things so the TLBs
+ get cleared.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 4524561820a9327e89107854b3a7187800ccf719
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Jul 14 20:26:57 2008 -0500
+
+ Remove fake flash bank from 8544 DS
+
+ The fake flash bank was generating errors for anyone who didn't have a
+ PromJET hooked up to the board. As that constitutes the vast majority of
+ users, we remove it.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 630d9bfcb5f6d3a43f251901a6b480994dcb6ea3
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Jul 14 14:07:03 2008 -0500
+
+ MPC8544DS: Add ATI Video card support
+
+ Add support for using a PCIe ATI Video card on PCIe2.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 7f9f4347cf325c63a39fe30910f3fb211ae2cc15
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Jul 14 14:07:02 2008 -0500
+
+ 85xx: Add some L1/L2 SPR register definitions
+
+ Add new L1/L2 SPRs related to e500mc cache config and control.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e5852787f0c3c442a276262f13d91ca450605ac0
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Jul 14 14:07:01 2008 -0500
+
+ MPC8544DS: Report board id, board version and fpga version.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 73f15a060f67a2462551c334215bd20fac6b81d1
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Jul 14 14:07:00 2008 -0500
+
+ 85xx: Cleanup L2 cache size detection
+
+ The L2 size detection code was a bit confusing and we kept having to add
+ code to it to handle new processors. Change the sense of detection so we
+ look for the older processors that aren't changing.
+
+ Also added support for 1M cache size on 8572.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c3ca7e5e00a24451f20df3bded9a61ba541921df
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Fri Jul 11 15:33:08 2008 -0400
+
+ sbc8560: enable CONFIG_OF_LIBFDT by default
+
+ Make the default build for the sbc8560 board be powerpc
+ capable with libfdt support.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+
+commit 6b44a44ec2aab180d7095c1c92e669cee1d3e3bd
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Jul 14 20:04:40 2008 -0500
+
+ Fix indentation for default boot environment variables
+
+ This was proposed by Paul Gortmaker in response to Wolfgang's comments on
+ similar #defines in sbc8560.h.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 37fef499104e28e0a83b02b85ca0d1fbe80d294a
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Fri Jul 11 15:33:07 2008 -0400
+
+ sbc8560: add default fdt values
+
+ Add in the default fdt settings and the typical EXTRA_ENV
+ settings as borrowed from the mpc8560ads. Fix a couple
+ of stale references to the mpc8560ads dating back to the
+ original clone/fork.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit d04e76edf92f7f89696989e8702b97e020455af3
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Fri Jul 11 15:33:06 2008 -0400
+
+ sbc8560: add in ft_board_setup()
+
+ Add in for the sbc8560, the ft_board_setup() routine, based on what is
+ in use for the Freescale MPC8560ADS board.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+
+commit c158bcaca3b31cbe38c4143812e6170e38a57393
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Fri Jul 11 15:33:05 2008 -0400
+
+ sbc8560: define eth0 and eth1 instead of eth1 and eth2
+
+ The existing config doesn't define CONFIG_HAS_ETH0, and so the
+ fdt support doesn't update the zeros in the dtb local-mac with
+ real data from the u-boot env. Since the existing config is
+ tailored to just two interfaces, get rid of the ETH2 definitions
+ at the same time.
+
+ Also don't include any end user specific data into the environment
+ by default -- things like MAC address, network parameters etc. need
+ to come from the end user.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 0ec436d2f95076d9e46ae594db6e9b1d8732840d
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Fri Jul 11 15:33:04 2008 -0400
+
+ sbc8560: properly set cs0_bnds for 512MB
+
+ The sbc8560 board ships with 512MB of memory installed,
+ but the current cs0_bnds is hard coded for 256MB. Set the
+ value based on CFG_SDRAM_SIZE.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+
+commit 6de5bf24004c8d9c9b070bb8f7418d1c45e5eb27
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Fri Jul 11 15:33:03 2008 -0400
+
+ sbc8560: proper definitions for TSEC.
+
+ The definitions for the TSEC have become out of date. There is no
+ longer any such options like "CONFIG_MPC85xx_TSEC1" or similar.
+ Update to match those of other boards, like the MPC8560ADS.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 71074abbe0c76429577aff58aeff0a24ad210b23
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Wed Jul 9 13:23:05 2008 -0400
+
+ 8xxx-fdt: set ns16550 clock from CFG_NS16550_CLK, not bi_busfreq
+
+ Some boards that have external 16550 UARTs don't have a direct
+ tie between bi_busfreq and the clock used for the UARTs. Boards
+ that do have such a tie should set CFG_NS16550_CLK to be
+ get_bus_freq(0) -- which most of them do already.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 24ef76f320fbadf074105229826514db140f939f
+Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
+Date: Wed Jul 2 07:03:53 2008 -0700
+
+ Change the temp map to ROM to align addresses to page size.
+
+ With a page size of BOOKE_PAGESZ_16M, both the real and effective
+ addresses must be multiples of 16MB. The hardware silently truncates
+ them so the code happens to work. This patch clarifies the situation
+ by establishing addresses that the hardware doesn't need to truncate.
+
+ Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 06b4186c10204b6683edb047ac5f506fb0ce0937
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Jun 17 17:45:22 2008 -0500
+
+ mpc85xx: use IS_E_PROCESSOR macro
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 6b70ffb9d1b2e791161f3cf92937aa45b4a07b78
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Mon Jun 16 15:55:53 2008 -0500
+
+ fdt: add crypto node handling for MPC8{3, 5}xxE processors
+
+ Delete the crypto node if not on an E-processor. If on 8360 or 834x family,
+ check rev and up-rev crypto node (to SEC rev. 2.4 property values)
+ if on an 'EA' processor, e.g. MPC8349EA.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 85e5808e8ea9f77da5219f23394112f0b424fa5e
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Fri Jul 11 15:10:11 2008 -0400
+
+ ARM DaVinci: Remove extern phy_t declaration by moving code to proper place
+
+ ARM DaVinci: Remove extern phy_t declaration by moving
+ code to proper place.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit 3a9e7ba2ac14018c5dd1e78a7dd735571569c971
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Fri Jul 11 15:10:10 2008 -0400
+
+ ARM DaVinci: Remove duplicate definitions of MACH_TYPE and prototype of i2c_init()
+
+ ARM DaVinci: Remove duplicate definitions of MACH_TYPE
+ and prototype of i2c_init().
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit 348753d416cd2c9e7ec6520a544c8f33cf02a560
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Jul 14 14:03:02 2008 -0500
+
+ Fix some more printf() format problems.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 45b16d22c64674ccd8c4637456a987463609141c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 14 22:38:42 2008 +0200
+
+ Fix coding style; make code better parsable by external tools
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit b880cbf207b1c109d3a661417a8feddcbd729a9d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 14 21:19:08 2008 +0200
+
+ cpu/i386/serial.c: Fix syntax errors
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e2d45e6f4d9919e1afeac5e09557b2252832fccf
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 14 20:41:35 2008 +0200
+
+ elppc board: Coding style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 82b24a8a505fc81466484b3c55b574ee0b4205bc
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 14 20:40:22 2008 +0200
+
+ elppc board: fix syntax error.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0fe340585a6a48bd392d315b0dd84d068b1c3790
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 14 20:38:26 2008 +0200
+
+ EB+MCF-EV123 board: fix coding style (alingment)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6841785a0bb0f38175456a923edd634fb7dd6947
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 14 20:36:44 2008 +0200
+
+ EB+MCF-EV123 board: fix syntx error
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit ab5cda9f88c3eaf9cf599adc3a3375906c4ed904
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Jul 7 18:02:08 2008 -0500
+
+ Remove LBC_CACHE_BASE from 8544 DS
+
+ The 8544 DS doesn't have any cacheable Local Bus memories set up. By mapping
+ space for some anyway, we were allowing speculative loads into unmapped space,
+ which would cause an exception (annoying, even if ultimately harmless).
+ Removing LBC_CACHE_BASE, and using LBC_NONCACHE_BASE for the LBC LAW solves the
+ problem.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit d0ff51ba5d0309dbe9e25ea54f8a0285a6d5db90
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 14 15:19:07 2008 +0200
+
+ Code cleanup: fix old style assignment ambiguities like "=-" etc.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d7854223c5c85b5849fbf422cc8ac0efef461c37
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 14 15:10:53 2008 +0200
+
+ AmigaOneG3SE: remove dead and incomplete files
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit b64f190b7a34224df09b559ca111eb1b733f00ad
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 14 15:06:35 2008 +0200
+
+ Fix printf() format issues with sizeof_t types by using %zu
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f354b73e16a86f9e9085471a830605f74f84ea5d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Jul 14 14:11:45 2008 +0200
+
+ vsprintf: add z and t options
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 25dbe98abb686d8210e1731fba85ced7d3ce874c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jul 13 23:07:35 2008 +0200
+
+ Fix some more printf() format issues.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d5996dd555edf52721b7691a4c59de016251ed39
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jul 13 19:51:00 2008 +0200
+
+ Fix some more printf() format problems.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0f9d5f6d6e814907794995c6a22af752040c35d9
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jul 13 19:48:26 2008 +0200
+
+ ADS5121: Fix (delete) incorrect ads5121_diu_init() prototype
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 322716a1d1eb33a71067ba0eb1c5346fb2dd6b34
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Sat Jul 12 17:31:36 2008 +0200
+
+ Fix bug in Lime video driver
+
+ We need to wait while drawing engine clears frame
+ buffer before any further software accesses to frame
+ buffer will be initiated. Otherwise software drawn
+ parts could be partially destroyed by the drawing
+ engine or even GDC chip freeze could occur (as
+ observed on socrates board).
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 0a5676befb0c590212a53f7627fa5d0d8a84bf34
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jul 12 14:36:34 2008 +0200
+
+ Fix some more printf() format issues.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 18c8a28aad49803780bd8d52432ded528e37e701
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Jul 11 15:11:57 2008 +0200
+
+ hwmon: rename CONFIG_DS1722 to CONFIG_DTT_DS1722
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 6ecbb45bb027e90c19d63b48e7b0c05acc1a87c0
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Jul 11 11:50:53 2008 +0200
+
+ hwmon: Cleaning hwmon devices
+
+ Clean Makefile
+ Move device specific values to driver for better reading
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit c78fce699c7ff467ecd841da6a79f065180bf578
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Jul 11 10:43:13 2008 +0200
+
+ FIS: repare incorrect return value with ramdisk handling
+
+ Microblaze and PowerPC use boot_get_ramdisk for loading
+ ramdisk to memory with checking return value.
+ Return 0 means success. Return 1 means failed.
+ Here is correspond part of code from bootm.c which check
+ return code.
+
+ ret = boot_get_ramdisk (argc, argv, images, IH_ARCH_PPC,
+ &rd_data_start, &rd_data_end);
+ if (ret)
+ goto error;
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 84a2c64a26dc5e275e1cf4e76a6e194a18fb5477
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Jul 11 10:10:32 2008 +0200
+
+ microblaze: Remove useless ancient headers
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 53ea981c3124b13c137c2d10e975b7c6672266e0
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Jul 11 10:10:31 2008 +0200
+
+ microblaze: Clean uartlite driver
+
+ Redesign uartlite driver to in_be32 and out_be32 macros
+ Fix missing header in io.h
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit dbf3dfb386a2d5d2381814e39985ab2e21894550
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Fri Jul 11 02:39:14 2008 +0200
+
+ Enable passing of ATAGs required by latest Linux kernel.
+
+commit ef130d3093bdf88f01cf3e000fe5df249ebf2b1a
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Fri Jul 11 10:24:15 2008 -0400
+
+ Fix integer overflow warning in calc_divisor()
+
+ which happened when rounding the serial port clock divisor
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit 6b760189d77f001684e3160b355c185ca3804961
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Fri Jul 11 01:09:59 2008 +0200
+
+ Fix build time warnings in function mmc_decode_csd()
+
+ Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
+
+commit c15947d6ce0d59925c97fdfac692476af6e262d0
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Thu Jul 10 10:46:33 2008 -0400
+
+ ARM: Fix for broken compilation when defining CONFIG_CMD_ELF
+
+ caused by missing dcache status/enable/disable functions.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+commit 068c1b77c8f42a1a31084d2f4b1d5cc807c1a9ce
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jul 10 13:53:31 2008 +0200
+
+ ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boards
+
+ This patch removes some ft_board_setup() functions from some 4xx boards.
+ This can be done since we now have a default weak implementation for this
+ in cpu/ppc4xx/fdt.c. Only board in need for a different/custom
+ implementation like canyonlands need their own version.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d39a089f8bc960ba9ae6a08fda5582b578620cc1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jul 13 14:58:16 2008 +0200
+
+ Add last known maintainer for orphaned boards; reformat.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5c761d57bb9940e016d561fda8b2ed84c55de5b6
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Thu Jul 10 13:16:04 2008 +0200
+
+ Remove kharris@nexus-tech.net from MAINTAINERS
+
+ Mail to kharris@nexus-tech.net bounces because the user doesn't exist
+ anymore. You can't be a maintainer without a valid e-mail address, so
+ move all boards that used to be maintained by Kyle Harris to the
+ "orphaned" list.
+
+ Currently, only PowerPC has a list of orphaned boards, so this patch
+ creates one for ARM as well.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 17bd17071463b0cde391ac4a0863d600474b4ea1
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Thu Jul 10 01:15:10 2008 +0200
+
+ at91: Fix to enable using Teridian MII phy (78Q21x3) with at91sam9260
+
+ On the at91sam9260ep development board there is an EEPROM
+ connected to the TWI interface (PA23, PA24 Peripheral A
+ multiplexing), so we cannot use these pins as ETX2, ETX3.
+ This patch configures PA10, PA11 pins for ETX2, ETX3
+ instead of PA23, PA24 pins.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+ Signed-off-by: Manuel Sahm <Manuel.Sahm@feig.de>
+
+commit f889265753ddf4465d9d580827bb9289bfac55d6
+Author: Kenneth Johansson <kenneth@southpole.se>
+Date: Sat Jul 12 13:18:34 2008 -0600
+
+ fix DIU for small screens
+
+ The DIU_DIV register is 8 bit not 5 bit. This prevented large DIV values
+ so it was not possible to set a slow pixel clock and thus prevented
+ display on small screens.
+
+ Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
+ Acked-by: John Rigby <jrigby@freescale.com>
+
+commit b60b8573875e650e4c69be667bfc88d3ed474a7c
+Author: John Rigby <jrigby@freescale.com>
+Date: Fri Jul 11 14:44:09 2008 -0600
+
+ ADS5121 cleanup compile warnings
+
+ board/ads5121/iopin.c
+ Replace bit fields in struct iopin_t with a single
+ field and intialize it via plain old macros.
+ This fixes the type pun warnings and makes the code
+ more readable.
+
+ board/ads5121/ads5121.c
+ Add include iopin.h to ads5121.c for the iopin_initialize
+ prototype.
+
+ Add an extern void ads5121_diu_init(void)
+
+ Signed-off-by: John Rigby <jrigby@freescale.com>
+
+commit bde63587622c4b830a27d1ddf7265843de9e994f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Jul 11 22:56:11 2008 +0200
+
+ Fix some more printf() format issues.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 184f1b404a90eef8b425c0e7b3018d59ef9982c8
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Jul 11 22:55:31 2008 +0200
+
+ Fixed some out-of-tree build issues
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 47bf9c71ae838305a3ea3161af8d14e6f3fc2c82
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jul 9 16:20:23 2008 -0500
+
+ ColdFire: Fix FB CS not setup properly for Mcf5282
+
+ Remove all CFG_CSn_RO in cpu/mcf52x2/cpu_init.c. If
+ CFG_CSn_RO is defined as 0, the chipselect will not
+ be assigned.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit bc3ccb139f0836f0a834cfd370a120a00ad7e63a
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jul 9 15:47:27 2008 -0500
+
+ ColdFire: Fix incorrect define for mcf5227x and mcf5445x RTC
+
+ Rename CONFIG_MCFTMR to CONFIG_MCFRTC to include real time
+ clock module in cpu/<cf arch>/cpu_init.c
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit f94945b517f10e01927101679c62361e03d4e837
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jul 9 15:25:01 2008 -0500
+
+ ColdFire: Fix incorrect board name in MAKEALL for M5253EVBE
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 0e0c4357d14a3563c6a2a1e6d5ad6a2cc4f35cab
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jul 9 15:21:44 2008 -0500
+
+ Fix compile error caused by missing timer function
+
+ Add #define CONFIG_MCFTMR in EB+MCF-EV123.h configuration file
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit c37ea031175b807c54e6bad9b270e9bede6c0078
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jul 9 15:14:25 2008 -0500
+
+ Fix compile error caused by incorrect function return type
+
+ Rename int mii_init(void) to void mii_init(void)
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit ab4860b255239dbaecccdd002c8d11f4ef54dd75
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jun 18 19:27:23 2008 -0500
+
+ ColdFire: Fix power up issue for MCF5235
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit dd08e97361fbc9e79fa5ef1a8acf29273b934b11
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jun 18 19:19:07 2008 -0500
+
+ ColdFire: Fix compiling error for MCF5275
+
+ The compiling error was caused by missing a closed parentheses
+ in speed.c
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 94603c2fd4dbe0655878416aa0da9f302d4c30d3
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jun 18 19:14:01 2008 -0500
+
+ ColdFire: Fix timer issue for MCF5272
+
+ The timer was assigned to wrong timer memory mapped which
+ caused udelay() and timer() not working properly.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 3b1e8ac9b43f89cc9291a6a86e6b33ef55801515
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jun 18 19:12:13 2008 -0500
+
+ ColdFire: Change invalid JMP to BRA caught by new v4e toolchain
+
+ Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+
+commit 8371dc2066136be21e10b7b9293e469297d77298
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jun 18 19:05:23 2008 -0500
+
+ ColdFire: Add -got=single param for new linux v4e toolchains
+
+ Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+
+commit 56d52615cd47bc522ee13bb7ec7e59d6ce9426c7
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Jun 18 13:21:19 2008 -0500
+
+ ColdFire: Fix code flash configuration for M547x/M548x boards
+
+ Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+
+commit 6e37091afc07fdcc15590093fd066b0cb7399f85
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Jun 24 12:12:16 2008 -0500
+
+ ColdFire: Fix warning messages by passing correct data type in board.c
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 81cc32322acb1b3225ee45606ced48e2a14824dc
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Thu May 29 12:21:54 2008 -0500
+
+ ColdFire: Fix UART baudrate formula
+
+ The formula "counter = (u32) (gd->bus_clk / gd->baudrate) / 32"
+ can generate the wrong divisor due to integer division truncation.
+ Round the calculated divisor value by adding 1/2 the baudrate
+ before dividing by the baudrate.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Acked-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit b578fb471444cbd7db1285701ba51343baaf73fb
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jul 10 11:38:26 2008 +0200
+
+ ppc4xx: Fix include sequence in 4xx_pcie.c
+
+ This patch now moves common.h to the top of the inlcude list. This
+ is needed for boards with CONFIG_PHYS_64BIT set (e.g. katmai), so that
+ the phys_size_t/phys_addr_t are defined to the correct size in this
+ driver.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 69e2c6d0d13d7c8cf1612ac090bdc4c59ba6858e
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jul 11 13:10:56 2008 +0200
+
+ ppc4xx: Fix compile warning in 44x_spd_ddr2.c
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6bd9138498c2e4f4f09190108b99157d1b2140b5
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jul 11 11:40:13 2008 +0200
+
+ ppc4xx: Fix small korat merge problem
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1d0554736a0a1dd59718acda660871ce56b69e18
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jul 11 11:34:52 2008 +0200
+
+ ppc4xx: Some Rewood cleanups (coding style, leading white spaces)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3a82113ed5934d498f25080441a8261fc9454b15
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jul 10 16:37:09 2008 +0200
+
+ ppc4xx: Add 460SX UIC defines
+
+ Only the really needed ones are added (cascading and EMAC/MAL).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 26173fc6f60521c2a8072f652f863617fc11ba9a
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jun 30 14:11:07 2008 +0200
+
+ ppc4xx: Continue cleanup of ppc440.h
+
+ This patch continues the ppc440.h cleanup by removing some of the unused
+ defines.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d9056b7913ed6a228d2f33671d916efedee541dd
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jun 30 14:05:05 2008 +0200
+
+ ppc4xx: Cleanup Katmai & Yucca PCIe register usage
+
+ This patch cleans up the 440SPe PCIe register usage. Now only defines
+ from the include/asm-ppc/4xx_pcie.h are used.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5de851403b01489b493fa83137ad990b8ce60d1c
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jun 26 17:36:39 2008 +0200
+
+ ppc4xx: Rework 440GX UIC handling
+
+ This patch reworks the 440GX interrupt handling so that the common 4xx
+ code can be used. The 440GX is an exception to all other 4xx variants
+ by having the cascading interrupt vectors not on UIC0 but on a special
+ UIC named UICB0 (UIC Base 0). With this patch now, U-Boot references
+ the 440GX UICB0 when UIC0 is selected. And the common 4xx interrupt
+ handling is simpler without any 440GX special cases.
+
+ Also some additional cleanup to cpu/ppc4xx/interrupt.c is done.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d1631fe1a05b063ccaf62ea892a8887b829847d1
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jun 26 13:40:57 2008 +0200
+
+ ppc4xx: Consolidate PPC4xx UIC defines
+
+ This 2nd patch now removes all UIC mask bit definition. They should be
+ generated from the vectors by using the UIC_MASK() macro from now on.
+ This way only the vectors need to get defined for new PPC's.
+
+ Also only the really used interrupt vectors are now defined. This makes
+ definitions for new PPC versions easier and less error prone.
+
+ Another part of this patch is that the 4xx emac driver got a little
+ cleanup, since now the usage of the interrupts is clearer.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4fb25a3db3b3839094aa9ab748efd7a95924690b
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jun 25 10:59:22 2008 +0200
+
+ ppc4xx: Consolidate PPC4xx UIC defines
+
+ This patch is the first step to consolidate the UIC related defines in the
+ 4xx headers. Move header from asm-ppc/ppc4xx-intvec.h to
+ asm-ppc/ppc4xx-uic.h as it will hold all UIC related defines in the next
+ steps.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7ee2619c20ccecd57966d74d844e6329e141261c
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jun 24 17:18:50 2008 +0200
+
+ ppc4xx: Consolidate PPC4xx EBC defines
+
+ This patch removes all EBC related defines from the PPC4xx headers
+ ppc405.h and ppc440.h and introduces a new header
+
+ include/asm-ppc/ppc4xx-ebc.h
+
+ with all those defines.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e321801bed5a6d896d298c00fd20046f039d5d66
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jul 10 13:52:44 2008 +0200
+
+ ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boards
+
+ This patch removes some ft_board_setup() functions from some 4xx boards.
+ This can be done since we now have a default weak implementation for this
+ in cpu/ppc4xx/fdt.c. Only board in need for a different/custom
+ implementation like canyonlands need their own version.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 08250eb2edbd96514d049602d9e134110ac3185f
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jul 10 15:32:32 2008 +0200
+
+ ppc4xx: Fix merge problems in 44x_spd_ddr2.c
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1740c1bf40e3c6d03ac16c29943fdd9fc1e87038
+Author: Grant Erickson <gerickson@nuovations.com>
+Date: Tue Jul 8 08:35:00 2008 -0700
+
+ ppc4xx: Add MII mode support to the EMAC RGMII Bridge
+
+ This patch adds support for placing the RGMII bridge on the
+ PPC405EX(r) into MII/GMII mode and allows a board-specific
+ configuration to specify the bridge mode at compile-time.
+
+ Signed-off-by: Grant Erickson <gerickson@nuovations.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2e2050842e731c823ce8d41fb0c15579eb70ced9
+Author: Grant Erickson <gerickson@nuovations.com>
+Date: Wed Jul 9 16:46:35 2008 -0700
+
+ ppc4xx: Add Mnemonics for AMCC/IBM DDR2 SDRAM Controller
+
+ This patch completes the preprocessor mneomics for the IBM DDR2 SDRAM
+ controller registers (MODT and INITPLR) used by the
+ PowerPC405EX(r). The MMODE and MEMODE registers are unified with their
+ peer values used for the INITPLR MR and EMR registers,
+ respectively. Finally, a spelling typo is correct (MANUEL to MANUAL).
+
+ With these mnemonics in place, the CFG_SDRAM0_* magic numbers for
+ Kilauea are replaced by equivalent mnemonics to make it easier to
+ compare and contrast other 405EX(r)-based boards (e.g. during board
+ bring-up).
+
+ Finally, unified the SDRAM controller register dump routine such that
+ it can be used across all processor variants that utilize the IBM DDR2
+ SDRAM controller core. It produces output of the form:
+
+ PPC4xx IBM DDR2 Register Dump:
+ ...
+ SDRAM_MB0CF[40] = 0x00006701
+ ...
+
+ which is '<mnemonic>[<DCR #>] = <value>'. The DCR number is included
+ since it is not uncommon that the DCR values in header files get mixed
+ up and it helps to validate, at a glance, they match what is printed
+ in the user manual.
+
+ Tested on:
+ AMCC Kilauea/Haleakala:
+ - NFS Linux Boot: PASSED
+ - NAND Linux Boot: PASSED
+
+ Signed-off-by: Grant Erickson <gerickson@nuovations.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ad7382d828982e9c1bafc4313ef1b666f6145f58
+Author: Grant Erickson <gerickson@nuovations.com>
+Date: Wed Jul 9 16:31:59 2008 -0700
+
+ ppc4xx: Add AMCC/IBM DDR2 SDRAM ECC Field Mnemonics
+
+ Add additional DDR2 SDRAM memory controller DCR mneomnics, condition
+ revision ID DCR based on 405EX, and add field mnemonics for bus error
+ status and ECC error status registers.
+
+ Signed-off-by: Grant Erickson <gerickson@nuovations.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 103201731bd8e85404d0f51a5b4e8abd14c0b6c6
+Author: Grant Erickson <gerickson@nuovations.com>
+Date: Wed Jul 9 16:31:36 2008 -0700
+
+ ppc4xx: Add SDR0_SRST Mnemonics for the 405EX(r)
+
+ This patch adds bit field mnemonics for the 405EX(r) SDR0_SRST soft reset register.
+
+ Signed-off-by: Grant Erickson <gerickson@nuovations.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5b457d00730d4aa0c6450d21a9104723e606fb98
+Author: Grant Erickson <gerickson@nuovations.com>
+Date: Wed Jul 9 11:55:46 2008 -0700
+
+ PPC4xx: Correct SDRAM_MCSTAT for PPC405EX(r)
+
+ While the PowerPC 405EX(r) shares in common the AMCC/IBM DDR2 SDRAM
+ controller core also used in the 440SP, 440SPe, 460EX, and 460GT, in
+ the 405EX(r), SDRAM_MCSTAT has a different DCR value.
+
+ Its present value on the 405EX(r) causes a read back of 0xFFFFFFFF
+ which causes SDRAM initialization to periodically fail since it can
+ prematurely indicate SDRAM ready status.
+
+ Signed-off-by: Grant Erickson <gerickson@nuovations.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0ce5c8675bb2c61f1d71fb97f0bbe822663fb93d
+Author: Feng Kan <fkan@amcc.com>
+Date: Tue Jul 8 22:48:42 2008 -0700
+
+ ppc4xx: Initial framework of the AMCC PPC460SX redwood reference board.
+
+ Add AMCC Redwood reference board that uses the latest
+ PPC 464 CPU processor combined with a rich mix of peripheral
+ controllers. The board will support PCIe, mutiple Gig ethernet
+ ports, advanced hardware RAID assistance and IEEE 1588.
+
+ Signed-off-by: Feng Kan <fkan@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 96e5fc0e6a1861d0fea4efa3cd376df95a5b1b89
+Author: Feng Kan <fkan@amcc.com>
+Date: Tue Jul 8 22:48:07 2008 -0700
+
+ ppc4xx: Add initial 460SX reference board (redwood) config file and defines.
+
+ Signed-off-by: Feng Kan <fkan@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7d30793685efcada183891c78fc892e6c9ba50c7
+Author: Feng Kan <fkan@amcc.com>
+Date: Tue Jul 8 22:47:31 2008 -0700
+
+ ppc4xx: Add initial 460SX defines for the cpu/ppc4xx directory.
+
+ Signed-off-by: Feng Kan <fkan@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9b55a2536919f4de1bb1044e6eb8262c2f53bc96
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Jul 11 01:16:00 2008 +0200
+
+ Fix some more print() format errors.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit fdd70d1921b87287d9a99d1be99bc35226c2b412
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Jul 10 20:57:54 2008 +0200
+
+ MAKEALL: remove duplicated at91 from ARM9 list and add LIST_at91 to arm
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c6457e3b8bc79a97381cf7deffa08f7c5a24f86c
+Author: Sergey Lapin <slapin@ossfans.org>
+Date: Thu Jun 5 11:06:29 2008 +0400
+
+ DataFlash AT45DB021 support
+
+ Some boards based on AT91SAM926X-EK use smaller DF chips to keep
+ bootstrap, u-boot and its environment, using NAND or other external
+ storage for kernel and rootfs. This patch adds support for
+ small 1024x263 chip.
+
+ Signed-off-by: Sergey Lapin <slapin@ossfans.org>
+
+commit 4109df6f75fc00ab7da56d286ba50149a0d16a69
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu Jul 10 14:00:15 2008 -0500
+
+ silence misc printf formatting compiler warnings
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 3d71c81a9bb03f866a1e98da96363ef3f46c76b3
+Author: Markus Klotzbücher <mk@denx.de>
+Date: Thu Jul 10 14:47:09 2008 +0200
+
+ USB: shutdown USB before booting
+
+ This patch fixes a potentially serious issue related to USB which was
+ discouvered by Martin Krause <martin.krause@tqs.de> and fixed for
+ ARM920T. Martin wrote:
+
+ Turn off USB to prevent the host controller from writing to the
+ SDRAM while Linux is booting. This could happen, because the HCCA
+ (Host Controller Communication Area) lies within the SDRAM and the
+ host controller writes continously to this area (as busmaster!), for
+ example to increase the HccaFrameNumber variable, which happens
+ every 1 ms.
+
+ This is a slightly modified version of the patch in order to shutdown
+ USB when booting on all architectures.
+
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit f31c49db2a5e076f415c0785eb37f67f2faa5fc8
+Author: Martha Marx <mmarx@silicontkx.com>
+Date: Thu May 29 14:23:25 2008 -0400
+
+ Configuration changes for ADS5121 Rev 3
+
+ ADS5121 Rev 3 board is now the default config
+
+ config targets are now
+
+ ads5121_config
+ Rev 3 board with
+ PCI
+ M41T62 on board RTC
+ 512MB DRAM
+
+ ads5121_rev2_config
+ Rev 2 board with
+ No PCI
+ 256MB DRAM
+
+ Signed-off-by: Martha Marx <mmarx@silicontkx.com>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+ Acked-by: John Rigby <jrigby@freescale.com>
+
+commit 16bee7b0dc294ee01ca2434aa1dd3bd717a69615
+Author: Martha Marx <mmarx@silicontkx.com>
+Date: Thu May 29 15:37:21 2008 -0400
+
+ Consolidate ADS5121 IO Pin configuration
+
+ Consolidate ADS5121 IO Pin configuration to one file
+ board/ads5121/iopin.c.
+
+ Remove pin config from cpu/mpc512x/fec.c
+
+ Signed-off-by: Martha Marx <mmarx@silicontkx.com>
+ Acked-by: Grant Likely <grant.likely@secretlab.ca>
+ Acked-by: John Rigby <jrigby@freescale.com>
+
+commit d4692b0ba83b7b454bbd92bad1f4befe6e1657b7
+Author: Christian Eggers <christian@p2400.wgnetz.xx>
+Date: Fri Jun 27 19:46:51 2008 +0200
+
+ Fix "usb part" command
+
+ Only print partition for selected device if user supplied the <dev>
+ arg with the "usb part [dev]" command.
+
+ Signed-off-by: Christian Eggers <ceggers@gmx.de>
+ Acked-by: Markus Klotzbuecher <mk@denx.de>
+
+commit cc83b27217f7380041fea386ddb6d6d9b261617d
+Author: Harald Welte <laforge@gnumonks.org>
+Date: Mon Jul 7 00:58:05 2008 +0800
+
+ fix USB devices with multiple configurations
+
+ This patch fixes bugs in usbdcore*.c related to the use of devices
+ with multiple configurations.
+
+ The original code made mistakes about the meaning of configuration value and
+ configuration index, and the resulting off-by-one errors resulted in:
+
+ * SET_CONFIGURATION always selected the first configuration, no matter what
+ wValue is being passed.
+ * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first
+ configuration (index 0).
+
+ Signed-off-by: Harald Welte <laforge@openmoko.org>
+ Acked-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 06c53beae1a726e707971c555613f09b270a2461
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 10 13:16:09 2008 +0200
+
+ Fix some more print() format errors.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d4b5f3fa001228d76e2c3380cedadf804b802c2a
+Author: Christian Eggers <christian@p2400.wgnetz.xx>
+Date: Fri Jun 27 19:46:51 2008 +0200
+
+ Fix "usb part" command
+
+ Only print partition for selected device if user supplied the <dev>
+ arg with the "usb part [dev]" command.
+
+ Signed-off-by: Christian Eggers <ceggers@gmx.de>
+ Acked-by: Markus Klotzbuecher <mk@denx.de>
+
+commit e73b5212e0463a3db0af0a5c95c75bfb762ca973
+Author: Harald Welte <laforge@gnumonks.org>
+Date: Mon Jul 7 00:58:05 2008 +0800
+
+ fix USB devices with multiple configurations
+
+ This patch fixes bugs in usbdcore*.c related to the use of devices
+ with multiple configurations.
+
+ The original code made mistakes about the meaning of configuration value and
+ configuration index, and the resulting off-by-one errors resulted in:
+
+ * SET_CONFIGURATION always selected the first configuration, no matter what
+ wValue is being passed.
+ * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first
+ configuration (index 0).
+
+ Signed-off-by: Harald Welte <laforge@openmoko.org>
+ Acked-by: Markus Klotzbuecher <mk@denx.de>
+
+commit e870690bdca154943ecadd5212d2d59c1b9d391b
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jul 10 10:10:54 2008 +0200
+
+ MTD/NAND: Fix printf format warning in nand code
+
+ This patch fixes NAND related printf format warning. Those warnings are
+ now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd
+ [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is
+ really helpful.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 10943c9afa25694bd9999461f4e9e50ce22fff2b
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jul 10 10:00:45 2008 +0200
+
+ rtc: Fix printf format warning in m41t60.c
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit dc1da42f814cd71e6756c2cf62af1ada1d0581fb
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jul 8 12:01:47 2008 +0200
+
+ pci: Move PCI device configuration check into a separate weak function
+
+ This patch moves the check, if a device should be skipped in PCI PNP
+ configuration into the function pci_skip_dev(). This function is defined
+ as weak so that it can be overwritten by a platform specific one if
+ needed. The check if the device should get printed in the PCI summary upon
+ bootup (when CONFIG_PCI_SCAN_SHOW is defined) is moved to the function
+ pci_print_dev() which is also defined as weak too.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b002144e1dc21374b1ef5281fe6b5d014af96650
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Jul 10 09:58:06 2008 +0200
+
+ ppc4xx: Fix printf format warnings now visible with the updated format check
+
+ This patch fixes ppc4xx related printf format warning. Those warnings are
+ now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd
+ [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is
+ really helpful.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5d812b8b4ad9667c77a5bf92b4ba81699abc9fc3
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jul 9 17:33:57 2008 +0200
+
+ ppc4xx: Enable support for > 2GB SDRAM on AMCC Katmai
+
+ Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM.
+ To support such configurations, we "only" map the first 2GB via the TLB's. We
+ need some free virtual address space for the remaining peripherals like, SoC
+ devices, FLASH etc.
+
+ Note that ECC is currently not supported on configurations with more than 2GB
+ SDRAM. This is because we only map the first 2GB on such systems, and therefore
+ the ECC parity byte of the remaining area can't be written.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cf1c2ed91df26903b956948f37f82de9e1158a89
+Author: Larry Johnson <lrj@acm.org>
+Date: Sat Jun 14 17:02:49 2008 -0400
+
+ ppc4xx: Remove implementation of testdram() from Korat board support
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 47ce4a28ccfcfb803aa68d3d4505a8de056a8a5e
+Author: Larry Johnson <lrj@acm.org>
+Date: Sat Jun 14 16:53:02 2008 -0400
+
+ ppc4xx: Update and add FDT to Korat board support
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4188f0491886b3b486164e819c0a83fdb97efd7d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 10 01:13:30 2008 +0200
+
+ Minor coding style cleanup; update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8915f1189c1d29d8be7f4de325702d90a8988219
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date: Wed Jul 9 17:50:45 2008 -0400
+
+ e1000: add support for 82545GM 64bit PCI-X copper variant
+
+ This PCI-X e1000 variant works by just adding in the correct
+ PCI IDs in the appropriate places.
+
+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+
+commit 21ae6ca0315afdbc65dc3e95ffd5763e6773d030
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Wed Jul 9 12:34:11 2008 +0000
+
+ SPARC: Build error fix
+
+ (introduced by commit 391fd93ab23e15ab3dd58a54f5b609024009c378)
+
+ This patch makes SPARC targets build again. It is caused by
+ phys_addr_t and phys_size_t being defined in the wrong header
+ file. include/lmb.h need those typedefs to build.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+
+commit 11ccc33fa21acce108f6b4a6936e3271af904c64
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Wed Jul 9 08:17:15 2008 +0200
+
+ Many spelling fixes in README.
+
+ Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
+
+commit dbab0691d2533560f7e91b92ae844046a9ad1df3
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Wed Jul 9 08:17:06 2008 +0200
+
+ Minor spelling fix in comment.
+
+ Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
+
+commit 89134ea1f67208fd3160bdbb0b9eaab4eab98484
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Tue Jul 8 14:54:58 2008 -0400
+
+ Round the serial port clock divisor value returned by calc_divisor()
+
+ Round the serial port clock divisor value returned by
+ calc_divisor().
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+ Signed-off-by: John Roberts <john.roberts@pwav.com>
+
+commit 9d2e3947b2944e5bb85b4335533f8c93c58445fe
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Jul 9 17:47:52 2008 -0500
+
+ NAND: ifdef-protect most of nand.h when using legacy NAND.
+
+ Some macros such as NAND_CTL_SETALE conflict between current and legacy
+ NAND, being defined by the subsystem in the former case and the board
+ config file in the latter.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 2b1fa9d383cbbb7d347c1583bd6ca4e181ba8e9e
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Tue Jul 8 11:02:05 2008 -0400
+
+ ARM: Fix for wrong patch version applied for Lyrtech SFF-SDR board (ARM926EJS)
+
+ ARM: Fix for incorrect version of patch applied when
+ adding support for the Lyrtech SFF-SDR board.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+ Signed-off-by: Philip Balister, OpenSDR <philip@opensdr.com>
+
+commit 47042b363ee5022b8180c65d3f4558e7972c79cd
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Tue Jul 8 09:08:40 2008 +0900
+
+ Remove useless print message at apollon
+
+ Remove useless print message at apollon
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 98874ff329d4a5b32c467b43f6e966e1aa68479f
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Jul 7 14:24:39 2008 -0500
+
+ Fix LMB type issues
+
+ The LMB code now uses phys_addr_t and phys_size_t. Also, there were a couple
+ of casting problems in the bootm code that called the LMB functions.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit da8693a91b8eef75ade8de50a1b2ce035bc5fb54
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Jul 7 09:39:06 2008 -0500
+
+ Fix compiler warnings
+
+ gcc-4.3.x generates the following:
+
+ bootm.c: In function 'do_bootm_linux':
+ bootm.c:208: warning: cast from pointer to integer of different size
+ bootm.c:215: warning: cast from pointer to integer of different size
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 5bb12dbd7ae03189b6c13d8737b5a1b37c3df698
+Author: Harald Welte <laforge@gnumonks.org>
+Date: Mon Jul 7 15:40:39 2008 +0800
+
+ Remove code duplication for setting the default environment
+
+ common/env_common.c (default_env): new function that resets the environment to
+ the default value
+ common/env_common.c (env_relocate): use default_env instead of own copy
+ common/env_nand.c (env_relocate_spec): use default_env instead of own copy
+ include/environment.h: added default_env prototype
+
+ Signed-off-by: Werner Almesberger <werner@openmoko.org>
+ Signed-off-by: Harald Welte <laforge@openmoko.org>
+
+commit 99c2b434d37863df5dda5207a53760c6506fc2be
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Sun Jun 22 16:13:46 2008 +0200
+
+ NAND: Fix warning due to missing env_ptr casts to u_char * in env_nand.c.
+
+ The writeenv() and readenv() calls introduced by the recently added bad block
+ management for environment variables were missing casts therefore producing
+ compile time warnings.
+ While at it fixing some typo in a comment and indentation.
+
+ Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 3167c5386ea1c98b638be5d8763ef6d5938ef1bd
+Author: Scott Wood <scottwood@freescale.com>
+Date: Fri Jun 20 12:38:57 2008 -0500
+
+ NAND: Rename DEBUG to MTDDEBUG to avoid namespace pollution.
+
+ This is particularly problematic now that non-NAND-specific code is
+ including <nand.h>, and thus all debugging code is being compiled
+ regardless of whether it was requested, as reported by Scott McNutt
+ <smcnutt@psyent.com>.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit c3bf1ad7baa1b0dd989dedc260b7098b6089ae05
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Thu Jun 12 19:27:58 2008 +0200
+
+ mmc: Move atmel_mci driver into drivers/mmc
+
+ This makes it easier to use the driver on other platforms.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+ Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d2d54ea449639f3d1a6007e333ab9fcc609a18f0
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Thu Jun 12 19:27:57 2008 +0200
+
+ avr32: Use CONFIG_ATMEL_MCI to select the atmel_mci driver
+
+ After we move the atmel_mci driver into drivers/mmc, we can't select
+ it with CONFIG_MMC anymore. Introduce a new symbol specifically for
+ this driver so that there's no ambiguity.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+ Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 5ce13051a48c62bda9723df3b4778c492fb47f36
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Thu Jun 12 19:27:56 2008 +0200
+
+ Create drivers/mmc subdirectory
+
+ In order to consolidate more of the various MMC drivers around the
+ tree, we must first have a common place to put them.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+ Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit b502611b51f02718c2d1117d4981dabceb5af6de
+Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
+Date: Sun Jul 6 12:30:09 2008 +0200
+
+ Change env_get_char from a global function ptr to a function
+
+ This avoids an early global data reference.
+
+ Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+
+commit 27269417ade432189b234d9fbac98b54e37b978c
+Author: Matvejchikov Ilya <matvejchikov@gmail.com>
+Date: Sun Jul 6 13:57:58 2008 +0400
+
+ Some copy-n-paste fixes in printf usage
+
+ Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
+
+commit 0e6989b9faf1588e8723535539e88a0df3c71356
+Author: Matvejchikov Ilya <matvejchikov@gmail.com>
+Date: Sun Jul 6 13:57:00 2008 +0400
+
+ FDT memory and pci node fixes for MPC8260ADS
+
+ Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
+
+commit dc4b0b38d4aadf08826f6c31270f1eecd27964fd
+Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
+Date: Mon Jul 7 06:41:14 2008 -0700
+
+ Fix printf errors.
+
+ The compiler will help find mismatches between printf formats and
+ arguments if you let it. This patch adds the necessary attributes to
+ declarations in include/common.h, then begins to correct the resulting
+ compiler warnings. Some of these were bugs, e.g., "$d" instead of
+ "%d" and incorrect arguments. Others were just annoying, like
+ int-long mismatches on a system where both are 32 bits. It's worth
+ fixing the annoying errors to catch the real ones.
+
+ Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
+
+commit 417faf285b2527acb2de24c5cd3e2621d385408c
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed Jul 9 11:09:41 2008 -0500
+
+ Allow print_size to print in GB
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit e7c374529c87525c9aa463e0557c287887ae4e9e
+Author: Jason McMullan <mcmullan@netapp.com>
+Date: Sun Jun 8 23:56:00 2008 -0400
+
+ mips: When booting Linux images, add 'ethaddr' and 'eth1addr' to the environment
+
+ Add 'ethaddr' and 'eth1addr' to the Linux kernel environment if
+ they are set in the U-Boot environment.
+
+ Signed-off-by: Jason McMullan <mcmullan@netapp.com>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 0192d7d56e9320819dea262f49789ae18fdd2c72
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jul 8 12:57:14 2008 +0200
+
+ jedec_flash: Fix AM29DL800BB device ID
+
+ As pointed out by Jerry Hicks, this patch corrects the device ID of
+ the Spansion AM29DL800BB NOR device. Verified against latest Spansion
+ datasheet (rev C4 from Dezember 2006).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 689c1b30caacba3fbca0b1813facb3ab70b6cd63
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Mon Jul 7 11:22:37 2008 +0900
+
+ sh: Fix compile error sh7763rdp board
+
+ Disable SH ether driver.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 9e23fe0560b84e324dc5f0ff8813dab2aa34f074
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Tue Jul 8 12:03:24 2008 +0900
+
+ sh: Fix SH-boards compile error
+
+ By Cleanup out-or-tree building for some boards (.depend)
+ (commit:c8a3b109f07f02342d097b30908965f7261d9f15)
+ because filse ware changed, some SH-boards have compile error.
+ I revised this problem.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 3473ab737282b08ad61841fcbb14c4d264a93a8e
+Author: Jason Jin <Jason.jin@freescale.com>
+Date: Tue May 13 11:50:36 2008 +0800
+
+ Feed the watchdog in u-boot for 8610 board.
+
+ The watchdog on 8610 board is enabled by setting sw[6]
+ to on. Once enabled, the watchdog can not be disabled
+ by software. So feed the dog in u-boot is necessary for
+ normal operation.
+
+ Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+
+commit 63676841ca2d603b13765f3f7b72ff1a61c23f90
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Wed Jun 18 12:10:33 2008 -0400
+
+ Remove duplicate code in cpu/arm926ejs/davinci/lxt972.c.
+
+ Remove duplicate code in cpu/arm926ejs/davinci/lxt972.c.
+
+ Remove duplicate code in a if/else block in
+ cpu/arm926ejs/davinci/lxt972.c.
+ Fixed style issues.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit fec61431a003f5778bafa2624073a571af8bec9f
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Wed Jun 18 12:10:31 2008 -0400
+
+ Remove duplicate definitions in include/lxt971a.h.
+
+ Remove duplicate definitions in include/lxt971a.h.
+
+ Remove duplicate registers and bits definitions in
+ include/lxt971a.h for standard MII registers, and
+ use values in include/miiphy.h instead.
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 9751ee0990f467941da0b095a4e995f863672d7a
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Wed Jun 11 21:05:00 2008 +0900
+
+ net: sh: Renesas SH7763 Ethernet device support
+
+ Renesas SH7763 has 2 channel Ethernet device.
+ This is 10/100/1000 Base support.
+ But this patch check 10/100 Base only.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 873d97aabc0b1c8822ed1d87e8c5c8ae0a7e4ae9
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Jun 17 16:28:05 2008 +0900
+
+ sh: Update Renesas R2DPlus board
+
+ New NOR Flash board support and remove old type flash board config.
+ And Remove network setting from config file.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit ec39d479d2003f15e86e23ebc4e02a1c9a3a181c
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Jun 17 16:28:01 2008 +0900
+
+ sh: Update Renesas R7780MP board
+
+ New NOR Flash board support and remove network setting from config file.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c001cd604e9f133743effbddb1c215b48e761c5a
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Jun 17 16:27:56 2008 +0900
+
+ sh: Update Renesas Migo-R board
+
+ Remove network setting from config file.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit f9599eca7cb5ebe40e5305c8006dced6ecc5cd9e
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Jun 17 16:27:52 2008 +0900
+
+ sh: Update Hitachi MS7722SE board
+
+ Remove network setting from config file.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 26209e48e8791670c93108029a5c31a30016c6df
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Jun 17 16:27:48 2008 +0900
+
+ sh: Cleanup source code of SH7763RDP
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 5cd5b2c96ef0025762931349d350287aec03ab47
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Jun 17 16:27:44 2008 +0900
+
+ sh: Cleanup source code of R2DPlus
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 4ec7e915cfaa31b392755dd2c8231e64736d2ea8
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Jun 17 16:27:41 2008 +0900
+
+ sh: Cleanup source code of R7780MP
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 0955ef34c0454ae2ee59a78657a0f01fb3ef16d6
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Jun 17 16:27:38 2008 +0900
+
+ sh: Cleanup source code of MS7722SE
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 1d7b31d97b34ccb6f9b20a2465864998b0bf2691
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Tue Jun 17 16:27:34 2008 +0900
+
+ sh: Cleanup source code of MS7720SE
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 3ab4827cbe409488ebea1a2ee5094783f2672214
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Jul 7 00:45:03 2008 +0200
+
+ SH: fix out of tree building
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 9047bfa1e737d787be460387dd6f45737eeceb10
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Thu Jul 3 23:16:06 2008 +0900
+
+ net: smc911x: Fix typo
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+
+commit 5ed546fdd0ca46a165661c2009fa743d9c9fceca
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Wed Jul 2 18:54:08 2008 +0200
+
+ update mvBL-M7 board config
+
+ update mvBL-M7 config file to use UBOOT_VERSION and define
+ CONFIG_HIGH_BATS.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+
+commit 5cacc5d0ec52678a5eb83ecda5c3bcb22eb47f30
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Mon Jun 30 17:45:01 2008 +0900
+
+ net: fix compile problem in smc911x driver.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 9fea65a6c469b1b474b27446feb58738baba2d31
+Author: Michal Simek <monstr@monstr.eu>
+Date: Tue Jun 24 09:54:09 2008 +0200
+
+ ppc4xx: Rename CONFIG_XILINX_ML300 to CONFIG_XILINX_405
+
+ This change helps with better handling with others
+ Xilinx based platform.
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit cbb6289569ae4fc6e2d676528e46ffcc72d743d0
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Tue Jun 17 13:07:11 2008 +0900
+
+ net: ne2000: Move dev_addr variable from grobal to local.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit dd7e5fa5f847188f78f62f2c52de6cb3def3ecdb
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Tue Jun 17 13:07:15 2008 +0900
+
+ net: ne2000: Fix compile error of NE2000
+
+ If enable DEBUG, can not compile ne2000 driver.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit dd35479a50f6c7c31ea491c07c5200c6dfd06a24
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Mon Jun 23 22:57:27 2008 -0700
+
+ Add mechanisms for CPU and board-specific Ethernet initialization
+
+ This patch is the first step in cleaning up net/eth.c, by moving Ethernet
+ initialization to CPU or board-specific code. Initial implementation is
+ only on the Freescale TSEC controller, but others will be added soon.
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 7754f2be5d1835d263aad21b5a629526f3e680b0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Jul 6 01:21:46 2008 +0200
+
+ include/sha256.h: fix file permissions.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d3bcdf838e2991d58571308fa6e04ca335bc06e8
+Author: Patrice Vilchez <patrice.vilchez@atmel.com>
+Date: Tue May 27 11:15:29 2008 +0200
+
+ [AT91SAM9] Fix NAND FLASH timings
+
+ Fix NAND FLASH timings for at91sam9x evaluation kits.
+
+ New timings are based on application note
+ "NAND Flash Support on AT91SAM9 Microcontrollers" available at
+ http://atmel.com/dyn/resources/prod_documents/doc6255.pdf
+
+ Signed-off-by: Patrice Vilchez <patice.vilchez@atmel.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Stelian Pop <stelian@popies.net>
+
+commit 19bd688484322fe62d1a66c8299da6ff9e967ff9
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu May 22 00:15:40 2008 +0200
+
+ Fix boot from NOR due to incorrect reset delay.
+
+ AT91 RSTC registers are battery-backuped, so their values
+ are not reset across power cycles. One of those registers,
+ the AT91_RSTC_MR register, is being modified by U-Boot, in
+ the ethernet initialisation routine, to generate a 500ms
+ user reset.
+
+ Unfortunately, this value is not being restored afterwards,
+ causing subsequent resets to also last for 500ms.
+
+ This long reset sequence causes problems (at least) in the
+ boot sequence from NOR: by the time the CPU tries to load
+ a program from the NOR flash, the latter is still in reset
+ and not yet available.
+
+ Additionaly, this patch fixes a bug in the original code which
+ caused the reset delay to last for 2s instead of 500ms.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f492dd636fbbae529e17533995bc6e5813c007f6
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Jul 4 20:11:49 2008 +0200
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5e6e350fc489aa19402f1e79037dd8c0a4bbd73d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Jul 4 20:07:35 2008 +0200
+
+ CCM/SCM boards: fix out of tree building
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit ab4c3a490df9a964711556d2a05b0c787db45fde
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 3 23:22:27 2008 +0200
+
+ SCM board: fix build errors.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a566466f17ba0e2d2b6c250e77da678fb932470d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 3 23:06:36 2008 +0200
+
+ IAD210 board: fix ``"ALIGN" redefined'' warning.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit ad756314797c16fa5dca23e115aab881011f164f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 3 23:00:24 2008 +0200
+
+ CCM board: fix build errors.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f16ed51702cb9fb6fa2e019bbc0fcd1466b57c3b
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Wed Jul 2 18:54:08 2008 +0200
+
+ update mvBL-M7 board config
+
+ update mvBL-M7 config file to use UBOOT_VERSION.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit ced209c50e80c25f13c083099b05044048d21f4f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 3 22:39:21 2008 +0200
+
+ sacsng board: fix warnings "suggest explicit braces to avoid ambiguous 'else'"
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4ff170a8180a79da4cdaab1b30d58cd7b6be565e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 3 22:34:08 2008 +0200
+
+ Cleanup: fix "expected specifier-qualifier-list before 'phys_size_t'" errors
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 730f298485984b011b6ee8f4acb511cb45a843dd
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jul 3 22:04:17 2008 +0200
+
+ lmb: fix "implicit declaration of function 'lmb_free'" warning
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 322ef5e28d2dc62571afc699b00add22a8e006e4
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jul 2 23:53:23 2008 +0200
+
+ Cleanup: remove redundant deleting on *~ files
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c8a3b109f07f02342d097b30908965f7261d9f15
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jul 2 23:49:18 2008 +0200
+
+ Cleanup out-or-tree building for some boards (.depend)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a30cc5a340e7f8f5f85a0e08e7f6c4106ce117c4
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jul 2 23:38:50 2008 +0200
+
+ Cleanup: fix out-of-tree building for some boards
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 461fa68d20861811487944d22291db5a13410e20
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jul 2 23:00:14 2008 +0200
+
+ Cleanup: replace hard-wired $(AR) 'crv' settings by $(ARFLAGS)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5981ebd32017e062b08aa6747cf591276f2db779
+Author: Detlev Zundel <dzu@denx.de>
+Date: Fri Jun 20 22:26:24 2008 +0200
+
+ fdt: Fix typo in variable name.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit a7a5982cd0f3482f88225af4da7795bc4f6cb9bc
+Author: Gary Jennejohn <garyj@denx.de>
+Date: Thu Jun 19 11:11:19 2008 +0200
+
+ Add logos for RRvision board
+
+ Signed-off-by: Gary Jennejohn <garyj@denx.de>
+
+commit ee4ae38342142237ca85913f88ee570c1eb5ca7c
+Author: Esben Haabendal <EsbenHaabendal@gmail.com>
+Date: Wed Jun 18 11:03:57 2008 +0200
+
+ mpc8260: add fdt_fixup_ethernet support
+
+ Add support for updating mac-address and local-mac-address in fdt for
+ all MPC8260 targets.
+
+ Signed-off-by: Esben Haabendal <eha@doredevelopment.dk>
+
+commit f6a69559d64498a04e1e0b087a9b920e5775f866
+Author: Steven A. Falco <sfalco@harris.com>
+Date: Thu Jun 12 13:24:42 2008 -0400
+
+ cmd_nvedit.c: clean up syntax highlighting
+
+ My text-editor (vim) has a bit of trouble syntax-highlighting the
+ cmd_nvedit.c file, because it apparently does not parse C
+ ifdef/else/endif. The following patch does not change the behavior of
+ the code at all, but does allow the editor to properly
+ syntax-highlight the file.
+
+ Signed-off-by: Steve Falco <sfalco@harris.com>
+
+commit 75678c807a6272ecc5541eb32898c93887f08400
+Author: Steven A. Falco <sfalco@harris.com>
+Date: Thu Jun 12 13:22:12 2008 -0400
+
+ Make setenv() return status
+
+ Currently, the setenv function does not return an error code.
+ This patch allows to test for errors.
+
+ Signed-off-by: Steve Falco <sfalco@harris.com>
+
+commit 4928e97c8531283ca9b368b7c29a8a12e726562a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jun 11 10:14:06 2008 -0500
+
+ PPC: Added fls, fls64, __ilog2_u64, and ffs64 to bitops
+
+ fls64, __ilog2_u64, ffs64 are variants that work on an u64,
+ and fls is used to implement them.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 83002a77cbdf383015ca384eff5fa31722d8e571
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Mon Jun 9 22:58:48 2008 +0200
+
+ i.MX31: Cleanup comments in lowlevel_init.S.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit f8cc312bbee69257d741dc9f4062f4a0f5adf609
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Jun 8 23:28:33 2008 -0700
+
+ Move conditional compilation of MPC8XXX SPI driver to Makefile
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d92ea21bafb674ee2bf27447970b047845e7b0a2
+Author: Juergen Kilb <J.Kilb@gmx.de>
+Date: Sun Jun 8 17:59:53 2008 +0200
+
+ i.MX31: fixed CTRL-C detection
+
+ The Register URXD contains status information in bits [15..8].
+ With status bit 15 set, CTRL-C was reported as 0x8003 instead
+ of 0x03. Therefore CTRL-C was not detected.
+ To solve this, bits [15..8] were masked out now.
+
+ Signed-off-by: Juergen Kilb <J.Kilb@gmx.de>
+ Acked-by: Felix Radensky <felix@embedded-sol.com>
+
+commit dd1c5523d6f44e842e69f2fcb50788c6060eab86
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jul 1 17:03:19 2008 +0200
+
+ ppc4xx: Fix 460EX/GT PCIe port initialization
+
+ This patch fixes a bug where the 460EX/GT PCIe UTLSET1 register was
+ configured incorrectly. Thanks to Olga Buchonina from AMCC for pointing
+ this out.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b571afde0295b007a45055ee49f8822c753a5651
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Jun 7 12:29:52 2008 +0200
+
+ add SHA256 support
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Francesco Albanese <Francesco.Albanese@swisscom.com>
+
+commit 3bab76a26e03df4ff81342fcc16393ce37d9766b
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Fri Jun 6 23:07:40 2008 +0200
+
+ Delay FIT format check on sector based devices
+
+ Global FIT image operations like format check cannot be performed on
+ a first sector data, defer them to the point when whole FIT image was
+ uploaded to a system RAM.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+ Partial ('cmd_nand' case) Acked-by: Grant Erickson <gerickson@nuovations.com>
+ NAND and DOC bits Acked-by: Scott Wood <scottwood@freescale.com>
+
+commit 9810263afec5ac5f38f92963bb3b6d799e4331d0
+Author: Dave Liu <r63238@freescale.com>
+Date: Tue Jun 3 17:38:19 2008 +0800
+
+ sata: wait for device updating signature to host
+
+ The driver need wait for the device updating signature to host.
+ If we don't wait for it, the driver can not detect the device(disk)
+ when the system powers up.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 745d8a0d3cea82e6d1753e14afb4588c34761b15
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Jun 28 14:56:17 2008 +0200
+
+ ppc4xx: Fix 460EX errata with CPU lockup upon high AHB traffic
+
+ This patch implements a fix provided by AMCC so that the lockup upon
+ simultanious traffic on AHB USB OTG, USB 2.0 and SATA doesn't occur
+ anymore:
+
+ Set SDR0_AHB_CFG[A2P_INCR4] (bit 24) and clear SDR0_AHB_CFG[A2P_PROT2]
+ (bit 25) for a new 460EX errata regarding concurrent use of AHB USB OTG,
+ USB 2.0 host and SATA.
+
+ This errata is not officially available yet. I'll update the comment
+ to add the errata number later.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8b616edb118e37d05f6401389eaee1c636b22828
+Author: Stuart Wood <stuart.wood@labxtechnologies.com>
+Date: Mon Jun 2 16:42:19 2008 -0400
+
+ serial_pl010.c: add watchdog support
+
+ Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>
+
+commit 86d3273e2b7be3fffb45e20c08535d6ad3aded6b
+Author: Stuart Wood <stuart.wood@labxtechnologies.com>
+Date: Mon Jun 2 16:40:08 2008 -0400
+
+ jffs2_1pass.c: add watchdog support
+
+ Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>
+
+commit 5744ddc6637fea4f7b911a54a5fa860cb81a5d89
+Author: Sascha Laue <sascha.laue@liebherr.com>
+Date: Fri May 30 09:48:14 2008 +0200
+
+ Configure DSP POST; add watchdog reset to diag command
+
+ Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
+
+commit f13526517859bf6b573e23ff47199e107d1009b5
+Author: Tor Krill <tor@excito.com>
+Date: Thu May 29 10:40:17 2008 +0200
+
+ Add sata sil3114 support
+
+ Signed-off-by: Tor Krill <tor@excito.com>
+
+commit e093a247628228100f405b6d7f6b1bfc16141938
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jun 28 23:34:37 2008 +0200
+
+ Coding Style Cleanup
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 01db232dd7a0ceb81208a9f2545720c80e5bfd83
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Jun 28 23:16:01 2008 +0200
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c7f879ec2b389c4f2bf726b293bd516f4c692e03
+Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+Date: Wed May 21 13:58:41 2008 -0400
+
+ ARM: Add support for Lyrtech SFF-SDR board (ARM926EJS)
+
+ This patch adds support for the Lyrtech SFF-SDR board,
+ based on the TI DaVinci architecture (ARM926EJS).
+
+ Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+ Signed-off-by: Philip Balister <philip@balister.org>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 341188b9ccaa8d4462d772cc067aca8d7618633a
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Thu May 22 11:09:59 2008 +0200
+
+ MMC: Consolidate MMC/SD command definitions
+
+ This moves the MMC and SD Card command definitions from
+ include/asm/arch/mmc.h into include/mmc.h. These definitions are
+ given by the MMC and SD Card standards, not by any particular
+ architecture.
+
+ There's a lot more room for consolidation in the MMC drivers which
+ I'm hoping to get done eventually, but this patch is a start.
+
+ Compile-tested for all avr32 boards as well as lpc2292sodimm and
+ lubbock. This should cover all three mmc drivers in the tree.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit fa60edfc4c952626e048c0e065f654b3c1822fa5
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Wed May 21 14:38:08 2008 +0900
+
+ Use better Ethernet timings for apollon board
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 41c5eaa7253ed82bbae1eda5667755872c615164
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Jun 16 13:58:56 2008 -0500
+
+ Resize device tree to allow space for board changes and the chosen node
+
+ Current code requires that a compiled device tree have space added to the end to
+ leave room for extra nodes added by board code (and the chosen node). This
+ requires that device tree creators anticipate how much space U-Boot will add to
+ the tree, which is absurd. Ideally, the code would resize and/or relocate the
+ tree when it needed more space, but this would require a systemic change to the
+ fdt code, which is non-trivial. Instead, we resize the tree inside
+ boot_relocate_fdt, reserving either the remainder of the bootmap (in the case
+ where the fdt is inside the bootmap), or adding CFG_FDT_PAD bytes to the size.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 7570a9941fc565922078679a72d246fe208d696d
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Jun 16 13:58:55 2008 -0500
+
+ Fix an underflow bug in __lmb_alloc_base
+
+ __lmb_alloc_base can underflow if it fails to find free space. This was fixed
+ in linux with commit d9024df02ffe74d723d97d552f86de3b34beb8cc. This patch
+ merely updates __lmb_alloc_base to resemble the current version in Linux.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 63796c4e61b207d2e635729d41b7a7f7d188b03c
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Jun 16 13:58:54 2008 -0500
+
+ Add lmb_free
+
+ lmb_free allows us to unreserve some memory so we can use lmb_alloc_base or
+ lmb_reserve to temporarily reserve some memory.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 4b03ac8b5102ad95f9fede7d13fa236977593e7d
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Jun 16 13:58:53 2008 -0500
+
+ Add ALIGN() macro
+
+ ALIGN() returns the smallest aligned value greater than the passed
+ in address or size. Taken from Linux.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 93262af85e3e9d9974c6c08fbd37a9a72e090ca2
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jun 24 17:15:22 2008 +0200
+
+ ppc4xx: Fix compilation problems with phys_size_t
+
+ This patch includes <asm/types.h> before <asm/u-boot.h> in some 4xx
+ board specific files where it has been missing.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 28eab0d77352b84885f938759bf2612b7bf0bc44
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Mon May 19 12:26:38 2008 +0200
+
+ Conditionally add -fno-stack-protector to CFLAGS
+
+ When compile-testing on powerpc, I get errors like this:
+
+ net/nfs.c:422: undefined reference to `__stack_chk_fail_local'
+
+ This seems to be because -fstack-protector is on by default, so
+ let's explicitly disable it on all architectures that support the
+ option.
+
+ The Ubuntu toolchain is affected by this problem, and according to
+ Mike Frysinger, Gentoo has been running with SSP enabled for years.
+ More and more distros are turning SSP on by default, so this problem
+ is likely to get worse in the future.
+
+ Also, powerpc just happens to be one of the arches I do
+ compile-testing on. There may be other arches affected by this too.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit dfd3be881c03a26e31f0dea4a42e76061fa610ac
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 18 19:09:52 2008 +0200
+
+ pcmcia/ti_pci1410a: Move compile condition to the Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 72d5d5f7b5c74a188df238ec6dd824d80c74857a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 18 19:09:51 2008 +0200
+
+ pxa_pcmcia: Move compile condition to the Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c9eff32881fb429101c937cf8c268f1d42e5c2a9
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 18 19:09:50 2008 +0200
+
+ marabun_pcmcia: Move compile condition to the Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6a19c46cae43c16c528eddefae3db97134f1915d
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Mon Jun 23 13:25:34 2008 +0200
+
+ fix non-working mvBL-M7
+
+ Add missing #define CONFIG_HIGH_BATS in mvBL-M7 board config file.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 846f1574ddddeda2bc227655e687308695f41cdc
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Mon Jun 23 11:40:56 2008 +0200
+
+ fix system config overwrite @ MPC834x and MPC8313
+
+ During 83xx setup the "System I/O configuration register high" gets
+ overwritten with user defined value if CFG_SICRH is defined.
+
+ Regarding to the MPC834x manual (Table 5-28 reve.1) bits 28+29 of SICRH
+ must keep their reset value regardless of configuration.
+
+ On my board (using RGMII) those bits are set after reset - yet it's
+ unclear where they come from.
+
+ The patch keeps both bits on MPC834x and MPC8313.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 4890246a2c5df90a74e2941e3673a49bbd36aee9
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Jun 17 17:45:27 2008 -0500
+
+ mpc83xx: move CPU_TYPE_ENTRY over to processor.h
+
+ to avoid this:
+
+ cpu.c:47:1: warning: "CPU_TYPE_ENTRY" redefined
+ In file included from cpu.c:33:
+ /home/kim/git/u-boot/include/asm/processor.h:982:1: warning: this is the location of the previous definition
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit aac7a5095b968d6c9a3e6422f31b4ad203cac9c8
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jun 23 11:15:09 2008 +0200
+
+ ppc4xx: Fix problem in gpio_config()
+
+ As pointed out by Guennadi Liakhovetski (thanks), pin2 is already shifted
+ left by one. So the additional shift is bogus.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 40777812316fc252c941665c0f60c148fd79d50f
+Author: Detlev Zundel <dzu@denx.de>
+Date: Fri Jun 20 22:24:05 2008 +0200
+
+ fdt: Fix typo in variable name.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 5f723a3b98c630bde33de74351f2121691fdef14
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Fri Jun 20 10:41:05 2008 +0200
+
+ avr32: Enable SPI flash support on ATNGW100
+
+ The ATNGW100 has 8MB DataFlash on board. Give users access to it through
+ the new SPI flash framework.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 5605ef6b5802921cbefe6a933a9dea3497396b5c
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Fri Jun 20 12:44:28 2008 +0200
+
+ avr32: Fix SPI portmux initialization
+
+ Use the new GPIO manipulation functions to set up the chip select lines,
+ and make sure both busses use GPIO for chip select control.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 4688f9e34a87e825aed34d07c9ca7a273e6fc8ab
+Author: Peter Ma <pma@mediamatech.com>
+Date: Sun Jun 1 22:59:24 2008 -0700
+
+ avr32: Add GPIO manipulation functions
+
+ Adds GPIO manipulation functions for AVR32 AP7 platform.
+
+ Signed-off-by: Peter Ma <pma@mediamatech.com>
+ [haavard.skinnemoen@atmel.com: coding style fixup, slight simplification]
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit b4fe1a71090c73efc6e4188eed188b2ff67fc02a
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Thu Jun 5 13:02:30 2008 +0200
+
+ MPC8360ERDK: adapt NAND interface for the re-written FSL NAND UPM driver
+
+ This patch is based on the following patch sent a few minutes ago:
+ "NAND FSL UPM: driver re-write using the hwcontrol callback"
+ It is untested, of course. Anton, could you please give it a try.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 96026d42fa4e646d28318c0a1438aac4b2017909
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Thu Jun 12 12:40:11 2008 +0200
+
+ Fix 4xx build issue
+
+ Building for 4xx doesn't work since commit 4dbdb768:
+
+ In file included from 4xx_pcie.c:28:
+ include/asm/processor.h:971: error: expected ')' before 'ver'
+ make[1]: *** [4xx_pcie.o] Error 1
+
+ This patch fixes the problem.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+ Acked-by: Stefan Roese <sr@denx.de>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a036b0443657fe0f4773786de9092251869f08ac
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jun 19 01:45:50 2008 -0500
+
+ MPC8610HPCD: Report board id, board version and fpga version.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 7de8c21f14df9c20fdcf6027aec8e8545f75f835
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jun 19 01:45:27 2008 -0500
+
+ MPC8641HPCN: Report board id, board version and fpga version.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit fb8c061ea05fc68d37e2a8b9f8c949d76c8d71a8
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jun 16 10:40:02 2008 +0200
+
+ cfi-flash: Fix problem in flash_toggle(), busy was not detected reliably
+
+ This patch simplifies flash_toggle() (AMD commandset), which is used to
+ detect if a FLASH device is still busy with erase/program operations. On
+ 800MHz Canyonlands/Glacier boards (460EX/GT) the current implementation
+ did not detect the busy state reliably, resulting in non erased sectors
+ etc. This patch now simplifies this function by "just" comparing the
+ complete data-word instead of ANDing it with the command-word (0x40)
+ before the compatison. It is done the same way in the Linux implementation
+ chip_ready() in cfi_cmdset_0002.c.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9e4006bca3d9fb4a2d061996771036cb01e539d3
+Author: Philip Balister <philip@balister.org>
+Date: Mon Jun 16 08:58:07 2008 -0400
+
+ NAND: Add missing declaration to non-redundant saveenv().
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 2cdb7f50ac59594540fffdf8dbd7b12beac79c52
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Mon Jun 2 15:09:55 2008 +0200
+
+ MPC8360ERDK: adapt NAND interface for the re-written FSL NAND UPM driver
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 212ed90615c3d20fa6bd73d70d5153bd0d124e5f
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jun 10 15:34:11 2008 +0200
+
+ ppc4xx: Canyonlands: Disable the RTC M41T62 square wave output
+
+ This patch disables the square wave output of the M41T62 RTC used on
+ Canyonlands & Glacier. Here the explanation:
+
+ The serial real-time clock part used in the design is an
+ STMicro M41T62. This part has a full-time 32KHz square wave
+ output that is connected to the TmrClk input to the
+ processor. The default state for this square wave output is
+ enabled so the output runs continuously when the board is
+ powered normally and also from the battery. The TmrClk input
+ to the processor goes to ground when the power is removed
+ from the board/processor, and therefore the running square
+ wave output is driving ground which drains the battery quickly.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a94f22f08f280905926219e568568964cb9eeb9d
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Jun 11 18:10:20 2008 -0500
+
+ Fix build issue with string.h and linux/string.h
+
+ This commit:
+ commit 338cc038461a6c7709c5b86fd9a240209338a1ae
+ Author: Wolfgang Denk <wd@denx.de>
+ Date: Fri Jun 6 14:28:14 2008 +0200
+
+ tools/mkimage: fix compiler warnings on some systems.
+
+ Broke building on some systems, because the host's string.h was interfering
+ with u-boot's linux/string.h. It doesn't look like we need the u-boot one if
+ we're building for the host, so now we only include when building inside
+ u-boot.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 9973e3c614721bbf169882ffc3be266a6611cd60
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Mon Jun 9 16:03:40 2008 -0500
+
+ Change initdram() return type to phys_size_t
+
+ This patch changes the return type of initdram() from long int to phys_size_t.
+ This is required for a couple of reasons: long int limits the amount of dram
+ to 2GB, and u-boot in general is moving over to phys_size_t to represent the
+ size of physical memory. phys_size_t is defined as an unsigned long on almost
+ all current platforms.
+
+ This patch *only* changes the return type of the initdram function (in
+ include/common.h, as well as in each board's implementation of initdram). It
+ does not actually modify the code inside the function on any of the platforms;
+ platforms which wish to support more than 2GB of DRAM will need to modify
+ their initdram() function code.
+
+ Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
+ MPC8641HPCN.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 391fd93ab23e15ab3dd58a54f5b609024009c378
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Mon Jun 9 20:37:18 2008 -0500
+
+ Change lmb to use phys_size_t/phys_addr_t
+
+ This updates the lmb code to use phys_size_t
+ and phys_addr_t instead of unsigned long. Other code
+ which interacts with this code, like getenv_bootm_size()
+ is also updated.
+
+ Booted on MPC8641HPCN, build-tested ppc, arm, mips.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 61b09fc2952dc636017df4e7970e3de132276ba1
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Mon Jun 9 20:37:17 2008 -0500
+
+ Change print_size to take phys_size_t
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit b57ca3e128cc10a133ba79bc7ec3e7b50e7c8fbe
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Mon Jun 9 20:37:16 2008 -0500
+
+ Change bd/gd memsize/ram_size to be phys_size_t.
+
+ Currently, both are defined as an unsigned long, but
+ should be phys_size_t. This should result in no real change,
+ since phys_size_t is currently an unsigned long for all the
+ default configs. Also add print_lnum to cmd_bdinfo to deal
+ with the potentially wider memsize.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit ba04f7010958e88a8910f2a123fee53fdc72e013
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Jun 10 16:16:02 2008 -0500
+
+ FSL LAW: Add new interface to use the last free LAW
+
+ LAWs have the concept of priority so its useful to be able to allocate
+ the lowest (highest number) priority. We will end up using this with the
+ new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 859a86a25c569d3665ff413d1d923394b8a961f3
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jun 11 00:51:45 2008 -0500
+
+ 85xx/86xx: Move to dynamic mgmt of LAWs
+
+ With the new LAW interface (set_next_law) we can move to letting the
+ system allocate which LAWs are used for what purpose. This makes life
+ a bit easier going forward with the new DDR code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+ Acked-by: Jon Loeliger <jdl@freescale.com>
+ Acked-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit f060054dadbbe7027ca088eed806a3ef1f82fdb7
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jun 11 00:44:10 2008 -0500
+
+ FSL LAW: Keep track of LAW allocations
+
+ Make it so we keep track of which LAWs have allocated and provide
+ a function (set_next_law) which can allocate a LAW for us if one is
+ free.
+
+ In the future we will move to doing more "dynamic" LAW allocation
+ since the majority of users dont really care about what LAW number
+ they are at.
+
+ Also, add CONFIG_MPC8540 or CONFIG_MPC8560 to those boards which needed them
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit ddde74a159caa6e18b481fec01d40b885aebb566
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Jun 9 22:31:57 2008 -0500
+
+ 85xx: remove dummy board_early_init_f
+
+ A number of board ports have empty version of board_early_init_f
+ for no reason since we control its via CONFIG_BOARD_EARLY_INIT_F.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 81e56e9af0d43712db8efb843606a8d62eab454f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Jun 9 18:55:38 2008 -0500
+
+ MPC8544DS: Update config.h
+
+ * Enable flash progress
+ * remove CLEAR_LAW0 since we dont really use it
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 978e81604c1b28526ed580df0fbe64eb8384e94f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Jun 9 13:37:24 2008 -0500
+
+ 85xx: Remove unused and unconfigured memory test code.
+
+ Remove unused and unconfigured DDR test code from FSL 85xx boards.
+ Besides, other common code exists.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a23cddde1a95f987e3fe2a720a7ec9375b7264d7
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Fri Jun 6 15:42:45 2008 +0200
+
+ Socrates: Added FPGA base address update in FDT.
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit fd51b0e0e620b8bc9fd4f6daa3a4fa6f5e1316f4
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Fri Jun 6 15:42:44 2008 +0200
+
+ Socrates: NAND support added. Changed the U-Boot base address and
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit 248ae5cfc8bf69074d1da099dc495d8e06070547
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Fri Jun 6 15:42:43 2008 +0200
+
+ NAND: Added support for 128-bit OOB, adapted
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit 31ca0208612f2eb57690110d7c2815953650e47b
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Fri Jun 6 15:42:42 2008 +0200
+
+ Socrates: added missed file with UPMA configuration data.
+
+ Signed-of-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit 59abd15b43cab7a4d19de4ba0943837d9555f7ba
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Fri Jun 6 15:42:41 2008 +0200
+
+ Socrates: Added FPGA mapping. LAWs and TLBs cleanup.
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit 740280e68ccc0b971e613face7eaaa8bd1382b8c
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Fri Jun 6 15:42:40 2008 +0200
+
+ Added the upmconfig() function for 85xx.
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit d39e68514ff943930ee692cff3fde03532eb7fec
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Fri Jun 6 15:42:39 2008 +0200
+
+ Socrates: config file cleanup.
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit e8cc3f04b124f757af4528206e60d8eb715ae083
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Thu Jun 5 13:12:10 2008 +0200
+
+ TQM85xx: Change memory map to support Flash memory > 128 MiB
+
+ Some TQM85xx boards could be equipped with up to 1 GiB (NOR) Flash
+ memory. The current memory map only supports up to 128 MiB Flash.
+ This patch adds the configuration option CONFIG_TQM_BIGFLASH. If
+ set, up to 1 GiB flash is supported. To achieve this, the memory
+ map has to be adjusted in great parts (for example the CCSRBAR is
+ moved from 0xE0000000 to 0xA0000000).
+
+ If you want to boot Linux with CONFIG_TQM_BIGFLASH set, the new
+ memory map also has to be considered in the kernel (changed
+ CCSRBAR address, changed PCI IO base address, ...). Please use
+ an appropriate Flat Device Tree blob (tqm8548.dtb).
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit 1c2deff22cd6e2bf0e618fd6e09ca3eec5a8d051
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Thu Jun 5 13:12:09 2008 +0200
+
+ TQM85xx: NAND support via local bus UPMB
+
+ This patch adds support for NAND FLASH on the TQM8548. It is disabled by
+ default and can be enabled for the TQM8548 modules. It is now based on
+ the re-written FSL NAND UPM driver. A patch has been posted earlier today
+ with the subject:
+
+ "NAND FSL UPM: driver re-write using the hwcontrol callback"
+
+ Note that the R/B pin is not supported by that module requiring to use
+ the specified maximum delay time.
+
+ Note: With NAND support enabled the size of the U-Boot image exceeds
+ 256 KB and TEXT_BASE must therefore be set to 0xfff80000 in config.mk,
+ doubling the image size :-(.
+
+ Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit b9e8078bb3f3c48111a7081e27279938c3a445e1
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Thu Jun 5 13:12:08 2008 +0200
+
+ TQM8548: PCI express support
+
+ This patch adds support for PCI express cards. The board support
+ now uses common FSL PCI init code, for both, PCI and PCIe on all
+ TQM85xx modules.
+
+ Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit 1287e0c55a2ee2c575ac9ce8e4302cd4085be876
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Thu Jun 5 13:12:07 2008 +0200
+
+ TQM8548: Basic support for the TQM8548 modules
+
+ This patch adds basic support for the TQM8548 module from TQ-Components
+ (http://www.tqc.de/) including DDR2 SDRAM initialisation and support for
+ eTSEC 3 and 4
+
+ Furthermore Flash buffer write has been enabled to speed up output to
+ the Flash by approx. a factor of 10.
+
+ Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit 25991353204c78b094c3c1fec90182dcd607ab8f
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Thu Jun 5 13:12:06 2008 +0200
+
+ TQM85xx: Support for Flat Device Tree
+
+ This patch adds support for Linux kernels using the Flat Device Tree.
+ It also re-defines the default environment settings for booting Linux
+ with the FDT blob.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit d9ee843d54c54776e1fdb86336ce554906a87331
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Thu Jun 5 13:12:05 2008 +0200
+
+ TQM85xx: Support for Intel 82527 compatible CAN controller
+
+ This patch adds initialization of the UPMC RAM to support up to two
+ Intel 82527 compatible CAN controller on the TQM85xx modules.
+
+ Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit 518d5cfe72916323c746af1647764459914f555f
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Thu Jun 5 13:12:04 2008 +0200
+
+ TQM85xx: Bugfix in the SDRAM initialisation
+
+ The CS0_BNDS register is now set according to the detected
+ memory size.
+
+ Signed-off-by Martin Krause <martin.krause@tqs.de>
+
+commit 45dee2e620ccec6ac7b3548fe8979a34fd030e5d
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Thu Jun 5 13:12:03 2008 +0200
+
+ TQM85xx: Fix chip select configuration for second FLASH bank
+
+ This patch fixes the re-calculation of the automatic chip select
+ configuration for boards with two populated FLASH banks.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 46346f27cda6fd025a496bde8f2d4aeee04aca5f
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Thu Jun 5 13:12:02 2008 +0200
+
+ TQM85xx: Support for Spansion 'N' type flashes added
+
+ The 'N' type Spansion flashes (S29GLxxxN series) have bigger sectors,
+ than the formerly used 'M' types (S29GLxxxM series), so the flash layout
+ needs to be changed -> new start address of the environment. The macro
+ definition CONFIG_TQM_FLASH_N_TYPE is undefined by default and must be
+ defined for boards with 'N' type flashes.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit 5d5bd838f76eade22c0ea40a500389f924d0da36
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Thu Jun 5 13:12:01 2008 +0200
+
+ TQM85xx: Fix CPM port pin configuration
+
+ Do not configure port pins PD30/PD31 as SCC1 TxD/RxD except for the TQM8560
+ board. On the other TQM85xx boards (TQM8541 and TQM8555) SCC1 is not used
+ as serial interface anyway. Worse, on some board variants configuring the
+ pins for SCC1 leads to short circuits (for example on the TQM8541-BG).
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit b99ba1679e8cd51b023e67098c89e606e47137d2
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Thu Jun 5 13:12:00 2008 +0200
+
+ TQM85xx: Various coding style fixes
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit ae9e97fa96f643c8ba2b666b06a026cc8717eb00
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Tue Jun 10 22:15:58 2008 -0400
+
+ libfdt: Move the working_fdt pointer to cmd_fdt.c
+
+ The working_fdt pointer was declared in common/fdt_support.c but was
+ not used there. Move it to common/cmd_fdt.c where it is used (it is
+ also used in lib_ppc/bootm.c).
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit e489b9c078e22b0d9e75f002cd2a1bd967e88f5e
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Jun 10 11:06:17 2008 -0500
+
+ fdt: unshadow global working fdt variable
+
+ differentiate with local variables of the same name by renaming the
+ global 'fdt' variable 'working_fdt'.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit e1eb0e25d9d8fd8efdfb93f670a417663f386022
+Author: Andy Fleming <afleming@freescale.com>
+Date: Tue Jun 10 18:49:34 2008 -0500
+
+ socrates: Fix PCI clk fix patch
+
+ The submitted patch seems to have been more up-to-date, but an older patch was
+ already in the repository. This patch encompasses the differences
+
+ Taken entirely from Sergei Poselenov <sposelenov@emcraft.com>
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit a75a57ef6e4b613c81434971e96ed70cf9ec9ba0
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Thu Jun 5 13:02:29 2008 +0200
+
+ NAND FSL UPM: driver re-write using the hwcontrol callback
+
+ This is a re-write of the NAND FSL UPM driver using the more universal
+ hwcontrol callback (instead of the cmdfunc callback). Here is a brief
+ list of furher modifications:
+
+ - For the time being, the UPM setup writing the UPM array has been
+ removed from the driver and must now be done by the board specific
+ code.
+
+ - The bus width definition in "struct fsl_upm_nand" is now in bits to
+ comply with the corresponding Linux driver and 8, 16 and 32 bit
+ accesses are supported.
+
+ - chip->dev_read is only set if fun->dev_ready != NULL, which is
+ required for boards not connecting the R/B pin.
+
+ - A few issue have been fixed with MxMR bit manipulation like in the
+ corresponding Linux driver.
+
+ Note: I think the "io_addr" field of "struct fsl_upm" could be removed
+ as well, because the address is already determined by
+ "nand->IO_ADDR_[RW]", but I'm not 100% sure.
+
+ This patch has been tested on a TQM8548 modules with the NAND chip
+ Micron MT29F8G08FABWP.
+
+ This patch is based on the following patches posted to this list a few
+ minutes ago:
+
+ PPC: add accessor macros to clear and set bits in one shot
+ 83xx/85xx/86xx: add more MxMR local bus definitions
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 6beecfbb542992eede5831240cd58678274683a9
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Thu Jun 5 13:11:59 2008 +0200
+
+ MPC85xx: Beautify boot output of L2 cache configuration
+
+ The boot output is now aligned poperly with other boot output
+ lines, e.g.:
+
+ FLASH: 128 MB
+ L2: 512 KB enabled
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit 398415114f0a705163a14543e9fef03f734b1ffa
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Wed Jun 4 12:45:22 2008 +0200
+
+ PPC: add accessor macros to clear and set bits in one shot
+
+ PPC: add accessor macros to clear and set bits in one shot
+
+ This patch adds macros from linux/include/asm-powerpc/io.h to clear and
+ set bits in one shot using the in_be32, out_be32, etc. accessor functions.
+ They are very handy to manipulate bits it I/O registers.
+
+ This patch is required for my forthcoming FSL NAND UPM driver re-write and
+ the support for the TQM8548 module.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit 4677988c7edc070c3786d3db7994abeca3ab82a0
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Wed Jun 4 13:52:17 2008 +0200
+
+ TQM: move TQM boards to board/tqc
+
+ Move all TQM board directories to the vendor specific directory "tqc"
+ for modules from TQ-Components GmbH (http://www.tqc.de).
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit 6fab2fe72ca5bf95280cd52cdf378af3e506eb50
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Mon Jun 2 12:09:30 2008 +0200
+
+ 83xx/85xx/86xx: add more MxMR local bus definitions
+
+ 83xx/85xx/86xx: add more MxMR local bus definitions
+
+ This patch adds more macro definitions for the UPM Machine Mode Registers
+ They are copied from "include/mpc82xx.h" to simplify the merge of all 8xxx
+ common local bus definitions into include/asm-ppc/fsl_lbc.h. They are
+ required for my forthcoming FSL NAND UPM driver re-write and the support
+ for the TQM8548 module.
+
+ This patch is based on the following two patches from Anton Vorontsov:
+
+ http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06511.html
+ http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06587.html
+
+ I leave coding style violation fixes, code beautification and name
+ corrections to somebody else ;-(.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+
+commit c8c5fc266e4499e283c293ccb972863156aa4134
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu May 29 18:14:56 2008 +0400
+
+ 83xx/85xx: further localbus cleanups
+
+ Merge mpc85xx.h's LBC defines to fsl_lbc.h. Also, adopt ACS names
+ from mpc85xx.h, so ACS_0b10 renamed to ACS_DIV4, ACS_0b11 to ACS_DIV2.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 42dbd667c88d496882d53e22656e89b654205492
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Wed May 28 18:20:15 2008 +0400
+
+ 83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h
+
+ This patch moves Freescale Localbus defines out of mpc83xx.h, so we could
+ use it on MPC85xx and MPC86xx processors.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+
+commit 730b2fcf6fcd9eec3ea86fbb087c3f98aa23a769
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu May 29 11:22:06 2008 -0500
+
+ 85xx: Add setting of cache props in the device tree.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 4dbdb7681e243431530df0725627192a0c4aefda
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Jun 10 16:53:46 2008 -0500
+
+ 85xx: expose cpu identification
+
+ The current cpu identification code is used just to return the name
+ of the processor at boot. There are some other locations that the name
+ is useful (device tree setup). Expose the functionality to other bits
+ of code.
+
+ Also, drop the 'E' suffix and add it on by looking at the SVR version
+ when we print this out. This is mainly to allow the most flexible use
+ of the name. The device tree code tends to not care about the 'E' suffix.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2329fe113d847e43cca8e4a0e4edd613b50b8492
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue Jun 10 13:25:24 2008 -0500
+
+ mpc83xx: MVBLM7: minor build fixups
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit a1293e549b56da135ef32ffca5b9d35a16aa6802
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Tue Jun 10 09:14:05 2008 +0200
+
+ add MPC8343 based board mvBlueLYNX-M7 (board+make files)
+
+ Add MPC8343 based board mvBlueLYNX-M7.
+ It's a single board stereo camera system.
+ Please read doc/README.mvblm7 for details.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit c005b93925ba49f07da2aa748527996d927e172f
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Tue Jun 10 09:13:16 2008 +0200
+
+ add MPC8343 based board mvBlueLYNX-M7 (doc+config)
+
+ Add MPC8343 based board mvBlueLYNX-M7.
+ It's a single board stereo camera system.
+ Please read doc/README.mvblm7 for details.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit f9023afbdfd9f27e7c38f3cce965746e56d62dd3
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Thu May 29 18:14:56 2008 +0400
+
+ 83xx/85xx: further localbus cleanups
+
+ move the BRx_* and ORx_* left behind in mpc85xx.h
+
+ The same is needed for mpc8xx.h and mpc8260.h (defines are almost
+ the same, just few differences which needs some attention though).
+
+ But the bad news for mpc8xx and mpc8260 is that there are a lot of users
+ of these defines. So this cleanup I'll leave for the "better times".
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit bf30bb1f7c954d7855d9b23624b33b00c50b4697
+Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+Date: Wed May 28 18:20:15 2008 +0400
+
+ 83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h
+
+ This patch moves Freescale Localbus defines out of mpc83xx.h, so we could
+ use it on MPC85xx and MPC86xx processors.
+
+ Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit d82b4fc0ce8cca95e857fc51022e841cb2dbee6a
+Author: Tor Krill <tor@excito.com>
+Date: Mon Jun 2 15:09:30 2008 +0200
+
+ Add missing CSCONFIG_BANK_BIT_3 define to mpc83xx.h
+
+ Signed-off-by: Tor Krill <tor@excito.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 3b904ccb93c3196727e2e9870cb1df903cab19ad
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Mon Jun 9 23:37:44 2008 +0900
+
+ net: Conditional COBJS inclusion of network drivers
+
+ Replace COBJS-y with appropriate driver config names.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 2fb698bf50f4aff2485581a12fa634a07c040e4a
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Mon Jun 9 21:02:17 2008 -0400
+
+ Use strncmp() for the fdt command
+
+ Cleaner than doing multiple conditionals on characters.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 47abe8ab290d2721a8eeadff65b939e6af8c01b0
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Sat Jun 7 12:25:05 2008 -0400
+
+ The fdt boardsetup command criteria was not unique
+
+ It was checking just for "b", which is not unique with respect to the
+ "boot" command. Change to check for "boa"[rdsetup].
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 2f08bfa9526bae4f461e043530cfb903fec0d273
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Tue May 20 17:19:11 2008 +1000
+
+ libfdt: Several cleanups to parameter checking
+
+ This patch makes a couple of small cleanups to parameter checking of
+ libfdt functions.
+
+ - In several functions which take a node offset, we use an
+ idiom involving fdt_next_tag() first to check that we have indeed been
+ given a node offset. This patch adds a helper function
+ _fdt_check_node_offset() to encapsulate this usage of fdt_next_tag().
+
+ - In fdt_rw.c in several places we have the expanded version
+ of the RW_CHECK_HEADER() macro for no particular reason. This patch
+ replaces those instances with an invocation of the macro; that's what
+ it's for.
+
+ - In fdt_sw.c we rename the check_header_sw() function to
+ sw_check_header() to match the analgous function in fdt_rw.c, and we
+ provide an SW_CHECK_HEADER() wrapper macro as RW_CHECK_HEADER()
+ functions in fdt_rw.c
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit fec6d9ee7c10443f65ce1788ef818919167bbf2e
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Tue Jun 3 20:34:45 2008 -0400
+
+ Remove the deprecated CONFIG_OF_FLAT_TREE
+
+ Use CONFIG_OF_LIBFDT instead to support flattened device trees. It is
+ cleaner, has better functionality, and is better supported.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 62bcdda293efa752f8281fbd9da03822b27ce82f
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Tue Jun 3 20:26:29 2008 -0400
+
+ Change the stxxst to CONFIG_OF_LIBFDT
+
+ This was configured to use the deprecated CONFIG_OF_FLAT_TREE, change
+ to CONFIG_OF_LIBFDT.
+
+ WARNING: It appears that this board lost its ability to boot via a
+ flattened device tree prior to this changeset.
+
+ WARNING: This conversion was untested because I do not have a board to
+ test it on.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 589c04271d129729a8b01391453851ab9cc4069c
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Tue Jun 3 20:24:58 2008 -0400
+
+ Convert mpc7448hpc2 to CONFIG_OF_LIBFDT
+
+ This was configured to use the deprecated CONFIG_OF_FLAT_TREE, change
+ to CONFIG_OF_LIBFDT.
+
+ WARNING: This conversion is untested because I do not have a board to
+ test it on.
+
+ NOTE: The FDT blob (DTS) must have an /aliases/ethernet0 and (optionally)
+ /aliases/ethernet1 property for the ethernet to work.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit ee1e35bede91debc8bff9b02f75574486033b652
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu May 29 01:21:24 2008 -0500
+
+ 85xx: Only use PORPLLSR[DDR_Ratio] on platforms that define it
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3b9519fc50802436e417c839e69df7b2016cade5
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed May 14 13:10:04 2008 -0500
+
+ MPC85xx: Change traps.c to not reference non-addressable memory
+
+ Currently, END_OF_RAM is used by the trap code to determine if
+ we should attempt to access the stack pointer or not. However,
+ on systems with a lot of RAM, only a subset of the RAM is
+ guaranteed to be mapped in and accessible. Change END_OF_RAM
+ to use get_effective_memsize() instead of using the raw ram
+ size out of the bd.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 7faddaecea52f585f538fdf9c2e61f85a789b19c
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Mon Jun 9 13:39:57 2008 +0900
+
+ sh: Renesas Solutions SH7763RDP board support
+
+ SH7763RDP has SCIF, NOR Flash, Ethernet, USB host, LCDC and MMC.
+ In this patch, support SCIF, NOR Flash, and Ethernet.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 60179098a95eaa972007d7ec58e4c1588029720f
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Fri Jun 6 16:24:13 2008 +0900
+
+ sh: Add support Renesas SH7763
+
+ Renesas SH7763 has 3 SCIF, MMC, LCDC, Ethernet and other.
+ This patch supprts CPU register's header file.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 08c5fabe181d663eec0feba5ecd02c0b78934a52
+Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+Date: Fri Jun 6 16:16:08 2008 +0900
+
+ sh: SH7763 SCIF support
+
+ SH7763 has 3 SCIF channels. SCIF0 and 1 are same register constitution,
+ but only SCIF2 is different. This patch work all SCIF channel.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 79b51ff8205f0354d5300570614c1d2db499679c
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat Jun 7 20:51:59 2008 +0900
+
+ [MIPS] cpu/mips/Makefile: Split [CS]OBJS onto separate lines
+
+ Also get rid of some #ifdefs in *.c files.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 8bde63eb3f79d68f693201528dafc8ae7aa087de
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat Jun 7 20:51:56 2008 +0900
+
+ [MIPS] Rename Alchemy processor configs into CONFIG_SOC_*
+
+ CONFIG_SOC_AU1X00
+
+ Common Alchemy Au1x00 stuff. All Alchemy processor based machines
+ need to have this config as a system type specifier.
+
+ CONFIG_SOC_AU1000, CONFIG_SOC_AU1100, CONFIG_SOC_AU1200,
+ CONFIG_SOC_AU1500, CONFIG_SOC_AU1550
+
+ Machine type specifiers. Each port should have one of aboves.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit cc49cadeeb8bb2f0ae3fdc13af7051ae59f083bc
+Author: Stuart Wood <stuart.wood@labxtechnologies.com>
+Date: Fri May 30 16:05:28 2008 -0400
+
+ env_nand.c: Added bad block management for environment variables
+
+ Modified to check for bad blocks and to skipping over them when
+ CFG_ENV_RANGE has been defined.
+ CFG_ENV_RANGE must be larger than CFG_ENV_SIZE and aligned to the NAND
+ flash block size.
+
+ Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 279726bd00558e80263d44581c44167625b7fb9a
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed May 14 13:09:58 2008 -0500
+
+ MPC86xx: Change traps.c to not reference non-addressable memory
+
+ Currently, END_OF_RAM is used by the trap code to determine if
+ we should attempt to access the stack pointer or not. However,
+ on systems with a lot of RAM, only a subset of the RAM is
+ guaranteed to be mapped in and accessible. Change END_OF_RAM
+ to use get_effective_memsize() instead of using the raw ram
+ size out of the bd to prevent us from trying to access
+ non-mapped memory.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 338cc038461a6c7709c5b86fd9a240209338a1ae
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Jun 6 14:28:14 2008 +0200
+
+ tools/mkimage: fix compiler warnings on some systems.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit b2815f79288d4da7a3ba18bdbd05120ce09d5622
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 6 16:10:41 2008 +0200
+
+ ppc4xx: Fix misspelled CONFIG_440SPE/440EPX/GRX config options
+
+ We use upper case letters for the AMCC processor defines (like
+ CONFIG_440SPE) in U-Boot. So the 440SPe is labeled CONFIG_440SPE and
+ not CONFIG_440SPe. This patch fixes the last misspelled config options.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 72675dc6c06a48846d180106161d49dd714383cc
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 6 15:55:21 2008 +0200
+
+ ppc4xx: Unify AMCC's board config files (part 3/3)
+
+ This patch series unifies the AMCC eval board ports by introducing
+ a common include header for all AMCC eval boards:
+
+ include/configs/amcc-common.h
+
+ This header now includes all common configuration options/defines which
+ are removed from the board specific headers.
+
+ The reason for this is ease of maintenance and unified look and feel
+ of all AMCC boards.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 490f204096d6e2c9940f67816f154a8125bab116
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 6 15:55:03 2008 +0200
+
+ ppc4xx: Unify AMCC's board config files (part 2/3)
+
+ This patch series unifies the AMCC eval board ports by introducing
+ a common include header for all AMCC eval boards:
+
+ include/configs/amcc-common.h
+
+ This header now includes all common configuration options/defines which
+ are removed from the board specific headers.
+
+ The reason for this is ease of maintenance and unified look and feel
+ of all AMCC boards.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a8a11a9ed046b480a16e47a158f8f5300028dfa6
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Jun 6 15:54:31 2008 +0200
+
+ ppc4xx: Unify AMCC's board config files (part 1/3)
+
+ This patch series unifies the AMCC eval board ports by introducing
+ a common include header for all AMCC eval boards:
+
+ include/configs/amcc-common.h
+
+ This header now includes all common configuration options/defines which
+ are removed from the board specific headers.
+
+ The reason for this is ease of maintenance and unified look and feel
+ of all AMCC boards.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0e38c938ed4bcadb4f4fc1419a541431e94fc202
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Thu Jun 5 13:03:36 2008 +0200
+
+ DM9000 fix status check fail 0x6d error for trizeps board
+
+ According to the Application Notes of the DM9000, only the 2 bits 0:1 of
+ the status byte need to be checked to identify a valid packet in the fifo
+
+ But, The several different Application Notes do not all speak the same
+ language on these bits. They do not disagree, but only 1 Application Note
+ noted explicitly that only these 2 bits need to be checked.
+ Even the datasheets do not mention anything about these 2 bits.
+
+ Because the old code, and the kernel check the whole byte, I left this piece
+ untouched.
+
+ However, I tested all board/DM9000[A|E|EP] devices with this 2 bit check, so
+ it should work.
+
+ Notice, that the 2nd iteration through this receive loop (when a 2nd packet is
+ in the fifo) is much shorter now, compared to the older U-boot driver code,
+ so that we can maybe run into a hardware condition now that was never seen
+ before, or maybe was seen very unfrequently.
+
+ Additionaly added a cleanup of a stack variable.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 7daf2ebe9196dd67131a06d85049c3a8a08ca413
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Thu Jun 5 22:29:00 2008 +0900
+
+ [MIPS] Update <asm/addrspace.h> header
+
+ - Fix traditional KSEG names
+ - Replace PHYSADDR with CPHYSADDR
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit f0d5a6f060d00358b85c62a921a423ea8df71184
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Thu Jun 5 22:29:00 2008 +0900
+
+ [MIPS] mips_config.mk: Misc fixes
+
+ - Kill redundant `-pipe' (this will be added by $(TOPDIR)/config.mk)
+ - Modify comments
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 5f64d21c9a2998794f255b469165b91f092dfc2d
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Thu Jun 5 22:29:00 2008 +0900
+
+ [MIPS] Kill unused <version.h> inclusions
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit a55d48174cfd1a5bc184159513f48dcbbe409c83
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Thu Jun 5 22:29:00 2008 +0900
+
+ [MIPS] lib_mips/time.c: Fix CP0 count register usage and timer routines
+
+ MIPS port has two problems in timer routines. One is now we assume CFG_HZ
+ equals to CP0 counter frequency, but this is wrong. CFG_HZ has to be 1000
+ in the U-Boot system.
+
+ The other is we don't have a proper time management counter like timestamp
+ other ARCHs have. We need the 32-bit millisecond clock counter.
+
+ This patch introduces timestamp and CYCLES_PER_JIFFY. timestamp is a
+ 32-bit non-overflowing CFG_HZ counter, and CYCLES_PER_JIFFY is the number
+ of calculated CP0 counter cycles in a CFG_HZ.
+
+ STRATEGY:
+
+ * Fix improper CFG_HZ value to have 1000
+
+ * Use CFG_MIPS_TIMER_FREQ for timer counter frequency, instead.
+
+ * timer_init: initialize timestamp and set up the first timer expiration.
+ Note that we don't need to initialize CP0 count/compare registers here
+ as they have been already zeroed out on the system reset. Leave them as
+ they are.
+
+ * get_timer: calculate how many timestamps have been passed, then return
+ base-relative timestamp. Make sure we can easily count missed timestamps
+ regardless of CP0 count/compare value.
+
+ * get_ticks: return the current timestamp, that is get_timer(0).
+
+ Most parts are from good old Linux v2.6.16 kernel.
+
+ v2:
+ - Remove FIXME comments as they turned out to be trivial.
+ - Use CP0 compare register as a global variable for expirelo.
+ - Kill a global variable 'cycles_per_jiffy'. Use #define CYCLES_PER_JIFFY
+ instead.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 199e4f657c8af42efe3fb3ba1d1104eb6bb28c25
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Thu Jun 5 22:29:00 2008 +0900
+
+ [MIPS] lib_mips/time.c: Fix udelay
+
+ What we have to do is just to wait for given micro-seconds. No need to
+ take into account current time, get_timer and CFG_HZ.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit c7e38e413ae69120d3e51f132c7cb1d6b3514d03
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Thu Jun 5 22:28:59 2008 +0900
+
+ [MIPS] lib_mips/time.c: Replace CP0 access functions with existing macros
+
+ We already have many pre-defined CP0 access macros in <asm/mipsregs.h>.
+ This patch replaces mips_{compare,count}_set and mips_count_get with
+ existing macros.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 6b52cfe16cd539935e32bd8cf19146522e462a4d
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Tue Jun 3 15:48:17 2008 +0200
+
+ Get rid of annoying/superfluous bad-checksum warning message
+
+ U-boot can complain a lot about 'checksum bad' when it is attached to the network.
+ It is annoying for ordinary users who start to doubt the network connection
+ in general when they see messages like this.
+
+ This is caused by the routine NetCksumOk() which cannot handle IP-headers longer
+ than 20 bytes. Those packages can be ignored anyway by U-boot, so we trash them
+ now before checking the checksum.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d6ee5fa40c26970d39990c6fc4a2f20a97822650
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Wed Jun 4 10:47:25 2008 +0200
+
+ Fix order for reading rx-status registers in 32bit mode of DM9000
+
+ A last minute cleanup before submitting the DM9000A patch series yesterday introduced
+ a bug in reading the rx-status registers in 32bit mode only.
+ This patch repairs this.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 98291e2e689096420465074cce926b226d2e71b4
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Tue Jun 3 15:26:26 2008 +0200
+
+ DM9000: Some minor code cleanups
+
+ Some lines of the U-boot DM9000x driver are longer than 80 characters, or
+ need some other minor cleanup.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 850ba7555dbd4ca8d14fc475b864d534797adab3
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Tue Jun 3 15:26:25 2008 +0200
+
+ DM9000: Make driver work properly for DM9000A
+
+ The DM9000A network controller does not work with the U-boot DM9000x driver.
+ Analysis showed that many incoming packets are lost.
+
+ The DM9000A Application Notes V1.20 (section 5.6.1) recommend that the poll to
+ check for a valid rx packet be done on the interrupt status register, not
+ directly by performing the dummy read and the rx status check as is currently
+ the case in the u-boot driver.
+
+ When the recommended poll is done as suggested the driver starts working
+ correctly on 10Mbit/HD, but on 100MBit/FD packets come in faster so that there
+ can be more than 1 package in the fifo at the same time.
+
+ The driver must perform the rx-status check in a loop and read and handle all
+ packages until there is no more left _after_ the interrupt RX flag is set.
+
+ This change has been tested with DM9000A, DM9000E, DM9000EP.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit fbcb7ece0ea1e364180f1cf963e0fa0ce7f6560d
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Tue Jun 3 15:26:24 2008 +0200
+
+ DM9000: Improve eth_reset() routine
+
+ According to the application notes of the DM9000 v1.22 chapter 5.2 bullet 2, the
+ reset procedure must be done twice to properly reset the DM9000 by means of software.
+ This errata is not needed anymore for the DM9000A, but it does not bother it.
+
+ This change has been tested with DM9000A, DM9000E, DM9000EP.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit acba31847fad9ae40708cc2c9f3a634ec35f3416
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Tue Jun 3 15:26:23 2008 +0200
+
+ DM9000: improve eth_send() routine
+
+ The eth_send routine of the U-boot DM9000x driver does not match the
+ DM9000 or DM9000A application notes/programming guides.
+
+ This change improves the stability of the DM9000A network controller.
+
+ This change has been tested with DM9000A, DM9000E, DM9000EP.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 134e266253c02a7832560da59d394989c4f64453
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Tue Jun 3 15:26:22 2008 +0200
+
+ DM9000: repair debug logging
+
+ It seems that the debugging code of the DM9000x driver in U-boot has not been
+ compiled for a long time, because it cannot compile...
+
+ Also rearranged some loglines to get more useful info while debugging.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit a101361bfe23c120321e45d114c0603b8e0763e9
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Tue Jun 3 15:26:21 2008 +0200
+
+ DM9000: Add data bus-width auto detection.
+
+ The U-boot DM9000x driver contains a compile time bus-width definition for
+ the databus connected to the network controller.
+
+ This compile check makes the code unclear, inflexible and is unneccessary.
+ It can be asked to the network controller what its bus-width is by reading bits
+ 6 and 7 of the interrupt status register.
+
+ The linux kernel already uses a runtime mechanism to determine this bus-width,
+ so the implementation below looks somewhat like that implementation.
+
+ This change has been tested with DM9000A, DM9000E, DM9000EP.
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 63a0afa0c32e5f4ea98a9439542870072437404d
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jun 4 19:19:20 2008 +0200
+
+ ppc4xx: Fix problem with SDRAM init in bamboo NAND booting port
+
+ This patch fixes a problem spotted by Eugene O'Brian (thanks Eugene)
+ introduced by the commit:
+
+ ppc4xx/NAND_SPL: Consolidate 405 and 440 NAND booting code in start.S
+
+ With this patch SDRAM will get initialized again and booting from NAND
+ is working again.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Acked-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
+
+commit 9ef1cbef1a649e3779298b0e663be4865cbbbfbc
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue May 27 14:19:30 2008 +0200
+
+ Socrates: Fix PCI bus frequency report
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit 8ec6e332eace0ee78c71ee5f645d12b06813b86f
+Author: Tor Krill <tor@excito.com>
+Date: Thu May 29 11:10:30 2008 +0200
+
+ Fix incorrect switch for IF_TYPE in part.c
+
+ Use correct field in block_dev_desc_t when writing interface type in
+ dev_print. Error introduced in 574b3195.
+
+ Also added fix from Martin Krause
+
+ Signed-off-by: Tor Krill <tor@excito.com>
+
+commit b64b8a0bd310935b70af69ac970952f2b364ae56
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Tue May 27 10:25:39 2008 +0200
+
+ Add size #defines for Altera Cyclone-II EP2C8 and EP2C20.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+
+commit 35ef877f0a8f6232cdef748f442fed5accb2b641
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Thu May 22 18:56:52 2008 -0500
+
+ Additional fix to readline_into_buffer() with CONFIG_CMDLINE_EDITING before relocating
+
+ Removed unneeded command line history initialization. Also, the original
+ code would access the 'initted' variable before relocation to SDRAM
+ which resulted in erratic behavior since the bss is not initialized when
+ executing from flash.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 22f371b63038a4ecab04068877c1089e51a01ba1
+Author: Grant Erickson <gerickson@nuovations.com>
+Date: Wed May 21 13:28:30 2008 -0700
+
+ PPC4xx: Simplified post_word_{load, store}
+
+ This patch simplifies post_word_{load,store} by using the preprocessor
+ to eliminate redundant, copy-and-pasted code.
+
+ Signed-off-by: Grant Erickson <gerickson@nuovations.com>
+
+commit 9c048b523413ae5f3ff34e00cf57569c3368ab51
+Author: Vasiliy Leoenenko <vasiliy.leonenko@mail.ru>
+Date: Wed May 7 21:25:33 2008 +0400
+
+ cfi_flash: enable M18 flash chips family support.
+
+ Added new command set ID. Buffered write command processing is changed
+ in order to support M18 flash chips family.
+
+ Signed-off-by: Alexey Korolev <akorolev@infradead.org>
+ Signed-off-by: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
+
+commit 93c56f212ccdadc182018f0769cb284426b88f1d
+Author: Vasiliy Leoenenko <vasiliy.leonenko@mail.ru>
+Date: Wed May 7 21:24:44 2008 +0400
+
+ cfi_flash: support of long cmd in U-boot.
+
+ Some NOR flash chips needs support of commands with length grether than max
+ value size of uchar. For example all M18 family chips use 0x1ff command in
+ buffered write mode as value of program loops count.
+
+ Signed-off-by: Alexey Korolev <akorolev@infradead.org>
+ Signed-off-by: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
+
+commit 4d91d1df2f16b511ab80dec50c80e050ba0d841e
+Author: Stefan Roese <sr@denx.de>
+Date: Fri May 16 11:06:06 2008 +0200
+
+ DTT: Issue one-shot command on AD7414 (LM75 code) to read temp
+
+ On AD7414 the first value upon bootup is not read correctly.
+ This is most likely because of the 800ms update time of the
+ temp register in normal update mode. To get current values
+ each time we issue the "dtt" command including upon powerup
+ we switch into one-short mode.
+
+ This patch fixes the problem on AD7414 equipped boards (Sequoia,
+ Canyonlands etc), that temp value printed in the bootup log was
+ incorrect.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit de5bfcf7b0425e032be12698252dbaa6b65a28c0
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri May 30 16:55:06 2008 +0200
+
+ ppc4xx: Cleanup CPCI405 variant's config file
+
+ This patch removes some dead code from CPCI405 board's
+ config files. JFFS2 support is also removed. It's not used and
+ CPCI4052 does not build anymore without some size reduction.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 2918eb9d42bc705fcbd18c9fcc39d15ff2843c65
+Author: Kenneth Johansson <kenneth@southpole.se>
+Date: Thu May 29 16:32:33 2008 +0200
+
+ Remove shell variable UNDEF_SYM.
+
+ UNDEF_SYM is a shell variable in the main Makefile used to force the
+ linker to add all u-boot commands to the final image. It has no use here.
+
+ Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
+
+commit 8c66497e06bf803489c589df58ee591d71033274
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Fri May 16 11:10:35 2008 +0200
+
+ Add support for environment in SPI flash
+
+ This is pretty incomplete...it doesn't handle reading the environment
+ before relocation, it doesn't support redundant environment, and it
+ doesn't support embedded environment. But apart from that, it does
+ seem to work.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit b6368467e6a97f225e0a5fd7bfc5c7598ef5ddc4
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Fri May 16 11:10:34 2008 +0200
+
+ SPI Flash: Add "sf" command
+
+ This adds a new command, "sf" which can be used to manipulate SPI
+ flash. Currently, initialization, reading, writing and erasing is
+ supported.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit d25ce7d24cc0f93881559f4009175ea305af65e8
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Fri May 16 11:10:33 2008 +0200
+
+ SPI Flash subsystem
+
+ This adds a new SPI flash subsystem.
+
+ Currently, only AT45 DataFlash in non-power-of-two mode is supported,
+ but some preliminary support for other flash types is in place as
+ well.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 60445cb5c3eb77ed1a07f2d908eef09174483698
+Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
+Date: Fri May 16 11:10:32 2008 +0200
+
+ atmel_spi: Driver for the Atmel SPI controller
+
+ This adds a driver for the SPI controller found on most AT91 and AVR32
+ chips, implementing the new SPI API.
+
+ Changed in v4:
+ - Update to new API
+ - Handle zero-length transfers appropriately. The user may send a
+ zero-length SPI transfer with SPI_XFER_END set in order to
+ deactivate the chip select after a series of transfers with chip
+ select active. This is useful e.g. when polling the status
+ register of DataFlash.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit d255bb0e78d1cac5b7c8c98cb77a095f5f16de0d
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri May 16 11:10:31 2008 +0200
+
+ SPI API improvements
+
+ This patch gets rid of the spi_chipsel table and adds a handful of new
+ functions that makes the SPI layer cleaner and more flexible.
+
+ Instead of the spi_chipsel table, each board that wants to use SPI
+ gets to implement three hooks:
+ * spi_cs_activate(): Activates the chipselect for a given slave
+ * spi_cs_deactivate(): Deactivates the chipselect for a given slave
+ * spi_cs_is_valid(): Determines if the given bus/chipselect
+ combination can be activated.
+
+ Not all drivers may need those extra functions however. If that's the
+ case, the board code may just leave them out (assuming they know what
+ the driver needs) or rely on the linker to strip them out (assuming
+ --gc-sections is being used.)
+
+ To set up communication parameters for a given slave, the driver needs
+ to call spi_setup_slave(). This returns a pointer to an opaque
+ spi_slave struct which must be passed as a parameter to subsequent SPI
+ calls. This struct can be freed by calling spi_free_slave(), but most
+ driver probably don't want to do this.
+
+ Before starting one or more SPI transfers, the driver must call
+ spi_claim_bus() to gain exclusive access to the SPI bus and initialize
+ the hardware. When all transfers are done, the driver must call
+ spi_release_bus() to make the bus available to others, and possibly
+ shut down the SPI controller hardware.
+
+ spi_xfer() behaves mostly the same as before, but it now takes a
+ spi_slave parameter instead of a spi_chipsel function pointer. It also
+ got a new parameter, flags, which is used to specify chip select
+ behaviour. This may be extended with other flags in the future.
+
+ This patch has been build-tested on all powerpc and arm boards
+ involved. I have not tested NIOS since I don't have a toolchain for it
+ installed, so I expect some breakage there even though I've tried
+ fixing up everything I could find by visual inspection.
+
+ I have run-time tested this on AVR32 ATNGW100 using the atmel_spi and
+ DataFlash drivers posted as a follow-up. I'd like some help testing
+ other boards that use the existing SPI API.
+
+ But most of all, I'd like some comments on the new API. Is this stuff
+ usable for everyone? If not, why?
+
+ Changed in v4:
+ - Build fixes for various boards, drivers and commands
+ - Provide common struct spi_slave definition that can be extended by
+ drivers
+ - Pass a struct spi_slave * to spi_cs_activate and spi_cs_deactivate
+ - Make default bus and mode build-time configurable
+ - Override default SPI bus ID and mode on mx32ads and imx31_litekit.
+
+ Changed in v3:
+ - Add opaque struct spi_slave for controller-specific data associated
+ with a slave.
+ - Add spi_claim_bus() and spi_release_bus()
+ - Add spi_free_slave()
+ - spi_setup() is now called spi_setup_slave() and returns a
+ struct spi_slave
+ - soft_spi now supports four SPI modes (CPOL|CPHA)
+ - Add bus parameter to spi_setup_slave()
+ - Convert the new i.MX32 SPI driver
+ - Convert the new MC13783 RTC driver
+
+ Changed in v2:
+ - Convert the mpc8xxx_spi driver and the mpc8349emds board to the
+ new API.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+ Tested-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 289011207d999b2e4085150d2aa30d547ad9b800
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Fri May 16 11:10:30 2008 +0200
+
+ Move definition of container_of() to common.h
+
+ AVR32 and AT91SAM9 both have their own identical definitions of
+ container_of() taken from the Linux kernel. Move it to common.h so
+ that all architectures can use it.
+
+ container_of() is already used by some drivers, and will be used
+ extensively by the new and improved SPI API.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 110e006fe67fb4a6e1719ae6956c79b7ffc0148b
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Fri May 16 11:08:11 2008 +0200
+
+ soft_i2c: Pull SDA high before reading
+
+ Spotted by Dean Capindale.
+
+ Systems that support open-drain GPIO properly are allowed provide an
+ empty I2C_TRISTATE define. However, this means that we need to be
+ careful not to drive SDA low when the slave is expected to respond.
+
+ This patch adds a missing I2C_SDA(1) to read_byte() required to
+ tristate the SDA line on systems that support open-drain GPIO.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 3c1de1a6d36be9eee284a6c596a86e94f19cc5b2
+Author: Stefan Roese <sr@denx.de>
+Date: Mon May 19 11:34:53 2008 +0200
+
+ ppc4xx: Remove implementations of testdram()
+
+ This patch removes the used testdram() implementations of the board
+ that are maintained by myself.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit bbeff30cbd1c5d551eb0ad1c2239ec01844c0b0a
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jun 2 17:37:28 2008 +0200
+
+ ppc4xx: Remove superfluous dram_init() call or replace it by initdram()
+
+ Historically the 405 U-Boot port had a dram_init() call in early init
+ stage. This function was still called from start.S and most of the time
+ coded in assembler. This is not needed anymore (since a long time) and
+ boards should implement the common initdram() function in C instead.
+
+ This patch now removed the dram_init() call from start.S and removes the
+ empty implementations that are scattered through most of the 405 board
+ ports. Some older board ports really implement this dram_init() though.
+ These are:
+
+ csb272
+ csb472
+ ERIC
+ EXBITGEN
+ W7OLMC
+ W7OLMG
+
+ I changed those boards to call this assembler dram_init() function now
+ from their board specific initdram() instead. This *should* work, but please
+ test again on those platforms. And it is perhaps a good idea that those
+ boards use some common 405 SDRAM initialization code from cpu/ppc4xx at
+ some time. So further patches welcome here.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 192f90e272b3989ee7b4a666d1fdab831f20f8d2
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jun 2 17:22:11 2008 +0200
+
+ ppc4xx: Use new 4xx SDRAM controller enable defines in common ECC code
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 39b32be18cd33b53a84065edcd4e465165cc5564
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jun 2 17:20:03 2008 +0200
+
+ ppc4xx: Fix common ECC generation code for 440GP style platforms
+
+ This patch makes the common 4xx ECC code really usable on 440GP style
+ platforms.
+
+ Since the IBM DDR controller used on 440GP/GX/EP/GR is not register
+ compatible to the IBM DDR/2 controller used on 405EX/440SP/SPe/460EX/GT
+ we need to make some processor dependant defines used later on by the
+ driver.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ec724f883ee3f3925e6c55027e8ffa70ada83303
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jun 2 17:13:55 2008 +0200
+
+ ppc4xx: Change Kilauea to use the common DDR2 init function
+
+ This patch changes the kilauea and kilauea_nand (for NAND booting)
+ board port to not use a board specific DDR2 init routine anymore. Now
+ the common code from cpu/ppc4xx is used.
+
+ Thanks to Grant Erickson for all his basic work on this 405EX early
+ bootup.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 17ceb069b85fbb9269c4dc09b2c237f88334c5ba
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jun 2 14:59:21 2008 +0200
+
+ ppc4xx: Consolidate PPC4xx SDRAM/DDR/DDR2 defines, part2
+
+ This patch now adds a new header file (asm-ppc/ppc4xx-sdram.h) for all
+ ppc4xx related SDRAM/DDR/DDR2 controller defines.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 36ea16f6a066ccb046e91ebce4f326b69f4c0569
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jun 2 14:57:41 2008 +0200
+
+ ppc4xx: Consolidate PPC4xx SDRAM/DDR/DDR2 defines, part1
+
+ This patch removes all SDRAM related defines from the PPC4xx headers
+ ppc405.h and ppc440.h. This is needed since now some 405 PPC's use
+ the same SDRAM controller as 440 systems do (like 405EX and 440SP).
+
+ It also introduces new defines for the equipped SDRAM controller based on
+ which PPC variant is used. There new defines are:
+
+ used on 405GR/CR/EP and some Xilinx Virtex boards.
+
+ used on 440GP/GX/EP/GR.
+
+ used on 440EPx/GRx.
+
+ used on 405EX/r/440SP/SPe/460EX/GT.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 64852d09e06dd6db2b2db2a3c59bc2db176a54d6
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Jun 2 14:35:44 2008 +0200
+
+ ppc4xx/NAND_SPL: Consolidate 405 and 440 NAND booting code in start.S
+
+ This patch consolidates the 405 and 440 parts of the NAND booting code
+ selected via CONFIG_NAND_SPL. Now common code is used to initialize the
+ SDRAM by calling initdram() and to "copy/relocate" to SDRAM/OCM/etc.
+ Only *after* running from this location, nand_boot() is called.
+
+ Please note that the initsdram() call is now moved from nand_boot.c
+ to start.S. I experienced problems with some boards like Kilauea
+ (405EX), which don't have internal SRAM (OCM) and relocation needs to
+ be done to SDRAM before the NAND controller can get accessed. When
+ initdram() is called later on in nand_boot(), this can lead to problems
+ with variables in the bss sections like nand_ecc_pos[].
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Acked-by: Scott Wood <scottwood@freescale.com>
+
+commit 8a24c07ba5da2c72ad1f05e3eb8a463750200c98
+Author: Grant Erickson <gerickson@nuovations.com>
+Date: Thu May 22 14:44:24 2008 -0700
+
+ ppc4xx: Enable Primordial Stack for 40x and Unify ECC Handling
+
+ This patch (Part 2 of 2):
+
+ * Rolls up a suite of changes to enable correct primordial stack and
+ global data handling when the data cache is used for such a purpose
+ for PPC40x-variants (i.e. CFG_INIT_DCACHE_CS).
+
+ * Related to the first, unifies DDR2 SDRAM and ECC initialization by
+ eliminating redundant ECC initialization implementations and moving
+ redundant SDRAM initialization out of board code into shared 4xx
+ code.
+
+ * Enables MCSR visibility on the 405EX(r).
+
+ * Enables the use of the data cache for initial RAM on
+ both AMCC's Kilauea and Makalu and removes a redundant
+ CFG_POST_MEMORY flag from each board's CONFIG_POST value.
+
+ - Removed, per Stefan Roese's request, defunct memory.c file for
+ Makalu and rolled sdram_init from it into makalu.c.
+
+ With respect to the 4xx DDR initialization and ECC unification, there
+ is certainly more work that can and should be done (file renaming,
+ etc.). However, that can be handled at a later date on a second or
+ third pass. As it stands, this patch moves things forward in an
+ incremental yet positive way for those platforms that utilize this
+ code and the features associated with it.
+
+ Signed-off-by: Grant Erickson <gerickson@nuovations.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c821b5f120bedf73867513466412587c6912a8f8
+Author: Grant Erickson <gerickson@nuovations.com>
+Date: Thu May 22 14:44:14 2008 -0700
+
+ ppc4xx: Enable Primordial Stack for 40x and Unify ECC Handling
+
+ This patch (Part 1 of 2):
+
+ * Rolls up a suite of changes to enable correct primordial stack and
+ global data handling when the data cache is used for such a purpose
+ for PPC40x-variants (i.e. CFG_INIT_DCACHE_CS).
+
+ * Related to the first, unifies DDR2 SDRAM and ECC initialization by
+ eliminating redundant ECC initialization implementations and moving
+ redundant SDRAM initialization out of board code into shared 4xx
+ code.
+
+ * Enables MCSR visibility on the 405EX(r).
+
+ * Enables the use of the data cache for initial RAM on
+ both AMCC's Kilauea and Makalu and removes a redundant
+ CFG_POST_MEMORY flag from each board's CONFIG_POST value.
+
+ - Removed, per Stefan Roese's request, defunct memory.c file for
+ Makalu and rolled sdram_init from it into makalu.c.
+
+ With respect to the 4xx DDR initialization and ECC unification, there
+ is certainly more work that can and should be done (file renaming,
+ etc.). However, that can be handled at a later date on a second or
+ third pass. As it stands, this patch moves things forward in an
+ incremental yet positive way for those platforms that utilize this
+ code and the features associated with it.
+
+ Signed-off-by: Grant Erickson <gerickson@nuovations.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a439680019e06171d4a5694b7992accce87f590e
+Author: Grant Erickson <gerickson@nuovations.com>
+Date: Wed May 21 13:28:30 2008 -0700
+
+ PPC4xx: Simplified post_word_{load, store}
+
+ This patch simplifies post_word_{load,store} by using the preprocessor
+ to eliminate redundant, copy-and-pasted code.
+
+ Signed-off-by: Grant Erickson <gerickson@nuovations.com>
+
+commit f979690ee337450b2030aba128f95b7a8d9881c0
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu May 15 15:13:08 2008 -0500
+
+ Fix warnings from gcc-4.3.0 build on a ppc host
+
+ * The cfi_flash.c memset fix actual allows the board to boot so there is
+ a bit more going on here than just resolving warnings associated with
+ uninitialized variables.
+
+ * include/asm/bitops.h:302: warning: '__swab32p' is static but used in
+ inline function 'ext2_find_next_zero_bit' which is not static
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9b124a68346ce9605b6e1fcf79e1021541cdba9e
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Wed May 14 13:09:51 2008 -0500
+
+ MPC512x: Change traps.c to not reference non-addressable memory
+
+ Currently, END_OF_RAM is used by the trap code to determine if
+ we should attempt to access the stack pointer or not. However,
+ on systems with a lot of RAM, only a subset of the RAM is
+ guaranteed to be mapped in and accessible. Change END_OF_RAM
+ to use get_effective_memsize() instead of using the raw ram
+ size out of the bd.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 81673e9ae14b771cd13faf19947192599cae3959
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue May 13 19:01:54 2008 -0500
+
+ Make sure common.h is the first include.
+
+ If common.h isn't first we can get CONFIG_ options defined in the
+ board config file ignored. This can cause an issue if any of those
+ config options impact the size of types of data structures
+ (eg CONFIG_PHYS_64BIT).
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 95d449ad4de79dd32b1705b8a4d3550f1e9081e3
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Tue May 13 15:53:29 2008 +0200
+
+ Avoid initrd and logbuffer area overlaps
+
+ Add logbuffer to reserved LMB areas to prevent initrd allocation
+ from overlaping with it.
+
+ Make sure to use correct logbuffer base address.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 6956d53d9934862507f83f0e3255dfd4662e7482
+Author: Sascha Laue <sascha.laue@liebherr.com>
+Date: Tue May 13 13:29:54 2008 +0200
+
+ lwmon5: add memory-pattern-test to FPGA POST.
+
+commit e34a0e911b6a1568d0ca864234fbd0ee060d9b35
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Thu May 8 19:02:51 2008 -0500
+
+ PPC: 86xx Add bat registers to reginfo command
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit d5b9b8cdb8b6eb3a8b0f5d9909d69ccc9c703ed9
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Fri May 9 15:41:35 2008 -0500
+
+ PPC: Add print_bats() to lib_ppc/bat_rw.c
+
+ This function prints the values of all the BAT register
+ pairs - I needed this for debug earlier this week; adding it to
+ lib_ppc so others can use it (and add it to reginfo commands
+ if so desired).
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit c148f24c15743a02e855636e6bed013bd121f7f2
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Thu May 15 21:29:04 2008 -0500
+
+ PPC: Change lib_ppc/bat_rw.c to use high bats
+
+ Currently, this code only deals with BATs 0-3, which makes
+ it useless on systems that support BATs 4-7. Add the
+ support for these registers.
+
+ Signed-off-by: Becky Bruce <Becky.bruce@freescale.com>
+
+commit 31d826722434931e1152a09d140187dcf72f8aac
+Author: Becky Bruce <becky.bruce@freescale.com>
+Date: Thu May 8 19:02:12 2008 -0500
+
+ PPC: Create and use CONFIG_HIGH_BATS
+
+ Change all code that conditionally operates on high bat
+ registers (that is, BATs 4-7) to look at CONFIG_HIGH_BATS
+ instead of the myriad ways this is done now. Define the option
+ for every config for which high bats are supported (and
+ enabled by early boot, on parts where they're not always
+ enabled)
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit aa3b8bf9c30065bb2ea852799d32db5020598495
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Wed May 28 19:55:19 2008 +0200
+
+ E1000: Add support for the 82541GI LF Intel Pro 1000 GT Desktop Adapter
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit ff36fbb2e7583fb808eef773f511489c7a9c2df3
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed May 28 13:06:25 2008 -0500
+
+ ColdFire: Add 10 base ethernet support for mcf5445x
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 1a9fcc4b765599db24fa9c32293599f24c7a19ba
+Author: Jason McMullan <mcmullan@netapp.com>
+Date: Fri May 30 00:53:38 2008 +0900
+
+ mips: Add an 'include/asm/errno.h', like all other architectures
+
+ All other u-boot architectures have an include/asm/errno.h, so
+ this change adds it to the mips include/asm-mips headers also.
+
+ Stolen from Linux 2.6.25.
+
+ Signed-off-by: Jason McMullan <mcmullan@netapp.com>
+
+commit e2ad8426624bac457acc6925b6ff408e9bf20466
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Fri May 30 00:53:38 2008 +0900
+
+ [MIPS] <asm/mipsregs.h>: Update coprocessor register access macros
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 1a3adac81c292f2ee76e43cdeb2fbe8f915fe194
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Fri May 30 00:53:38 2008 +0900
+
+ [MIPS] <asm/mipsregs.h>: Update register / bit field definitions
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit bf462ae450a7f2eeeddc699ed345b391e3263540
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Fri May 30 00:53:37 2008 +0900
+
+ [MIPS] <asm/mipsregs.h>: CodinygStyle cleanups
+
+ No functional changes.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 89a1550ec6b74452274a7a23127936e2c7eec711
+Author: Jason McMullan <mcmullan@netapp.com>
+Date: Fri May 30 00:53:37 2008 +0900
+
+ mips: If CONFIG_CMD_SPI is defined, call spi_init()
+
+ The mips architecture currently does not call 'spi_init()' in the generic
+ board initialization routine is CONFIG_CMD_SPI is defined.
+
+ This patch rectifies that problem.
+
+ Signed-off-by: Jason McMullan <mcmullan@netapp.com>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit e996bc339b0f39f6c0b29b1455ba7eb318b023d3
+Author: Jason McMullan <mcmullan@netapp.com>
+Date: Fri May 30 00:53:37 2008 +0900
+
+ [MIPS] lib_mips/board.c: Add nand_init
+
+ This patch adds the standard 'nand_init()' call to the mips generic
+ 'board_init_r()' call, bringing MIPS in line with the other architectures.
+
+ Signed-off-by: Jason McMullan <mcmullan@netapp.com>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit d6ac2ed893c2168738aee01579d6283af8d37045
+Author: Scott Wood <scottwood@freescale.com>
+Date: Thu May 22 10:49:46 2008 -0500
+
+ Remove prototypes of nand_init() in favor of including nand.h.
+
+ Likewise with onenand_init().
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 229c56f07a82eacda8c8720cb146fc9be0f6db54
+Author: Scott Wood <scottwood@freescale.com>
+Date: Thu May 22 10:49:00 2008 -0500
+
+ Make onenand_uboot.h self-sufficient.
+
+ Don't assume types are provided by previously included headers.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 9723bbb46abb7b2ca24eead5114a3faa58060c20
+Author: Dirk Behme <dirk.behme@gmail.com>
+Date: Wed Jan 16 14:26:59 2008 +0100
+
+ nand: Correct NAND erase percentage output
+
+ For NAND erase sizes smaller than one NAND erase block, erase
+ percentage output becomes grater than 100% e.g.
+
+ -- cut --
+ > nand info
+ Device 0: NAND 64MiB 1,8V 8-bit, sector size 16 KiB
+ > nand erase 0x100000 0x2000
+ NAND erase: device 0 offset 0x100000, size 0x2000
+ Erasing at 0x100000 -- 200% complete.
+ OK
+ >
+ -- cut --
+
+ Correct this and give user a warning that more is erased than specified:
+
+ -- cut --
+ > nand erase 0x100000 0x2000
+ NAND erase: device 0 offset 0x100000, size 0x2000
+ Warning: Erase size 0x00002000 smaller than one erase block 0x00004000
+ Erasing 0x00004000 instead
+ Erasing at 0x100000 -- 100% complete.
+ OK
+ >
+ -- cut --
+
+ Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+
+commit 5922db6c0948506be91e0de44e7a6863a18a417f
+Author: Stelian Pop <stelian@popies.net>
+Date: Tue May 13 17:31:24 2008 +0200
+
+ Cleanup nand_info[] declaration.
+
+ The nand_info array is declared as extern in several .c files.
+ Those days, nand.h contains a reference to the array, so there is
+ no need to declare it elsewhere.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 135f0a7488af2947adbe4b40b79280bdfe5e9886
+Author: Scott Wood <scottwood@freescale.com>
+Date: Mon May 19 09:30:43 2008 -0500
+
+ NAND: Provide a sane default for NAND_MAX_CHIPS.
+
+ This allows the header to be included regardless of whether a board's
+ config file provides NAND-related defininitions.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit a8092c021d27f27f4b323b7d49979ca01b3fc19d
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Mon May 26 12:19:10 2008 +0200
+
+ avr32: Fix theoretical race in udelay()
+
+ If the specified delay is very short, the cycle counter may go past the
+ "end" time we are waiting for before we get around to reading it.
+
+ Fix it by checking the different between the cycle count "now" and the
+ cycle count at the beginning. This will work as long as the delay
+ measured in number of cycles is below 2^31.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 48ea623eae8674793372e3e7c95e72e5a44d7a95
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed May 21 13:01:09 2008 +0200
+
+ avr32: Compile atmel_mci.o conditionally
+
+ Remove #ifdef CONFIG_MMC from the source file and use conditional
+ compilation in the Makefile instead.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit e92a5bf8330654e33ac13f6b3058634e58f5d1c0
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Thu May 22 12:28:25 2008 +0200
+
+ avr32: Fix wrong error flags in atmel_mci driver
+
+ Make sure we check for CRC errors when sending commands that use CRC
+ checking.
+
+ Reported-by: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 7a96ddadd13e6ac9a829affce9b6f8823f580e49
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed May 21 11:10:59 2008 +0200
+
+ avr32: Fix two warnings in atmel_mci.c
+
+ The warnings are harmless but annoying. Let's fix them.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit a23e277c4a3a2bbc42d237aae29da3a8971e757f
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Mon May 19 11:36:28 2008 +0200
+
+ avr32: Rework SDRAM initialization code
+
+ This cleans up the SDRAM initialization and related code a bit, and
+ allows faster booting.
+
+ * Add definitions for EBI and internal SRAM to asm/arch/memory-map.h
+ * Remove memory test from sdram_init() and make caller responsible
+ for verifying the SDRAM and determining its size.
+ * Remove base_address member from struct sdram_config (was sdram_info)
+ * Add data_bits member to struct sdram_config and kill CFG_SDRAM_16BIT
+ * Add support for a common STK1000 hack: 16MB SDRAM instead of 8.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 95107b7c028806919630bf02c653aa8f4f867c94
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Mon May 19 11:27:37 2008 +0200
+
+ avr32: Do stricter stack checking in the exception handler
+
+ Don't do a stack dump if the stack pointer is outside the memory area
+ reserved for stack.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit caf83ea888a0220f41747d0b7748fa43b4a4bd49
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Fri May 2 15:32:57 2008 +0200
+
+ avr32: Use the same entry point for reset and exception handling
+
+ Since the reset vector is always aligned to a very large boundary, we
+ can save a couple of KB worth of alignment padding by placing the
+ exception vectors at the same address.
+
+ Deciding which one it is is easy: If we're handling an exception, the
+ CPU is in Exception mode. If we're starting up after reset, the CPU is
+ in Supervisor mode. So this adds a very minimal overhead to the reset
+ path (only executed once) and the exception handling path (normally
+ never executed at all.)
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 0c16eed2189a190bd5655b33c029f809a9b31128
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Fri May 2 15:24:22 2008 +0200
+
+ avr32: Put memset in its own section
+
+ All C code is compiled with -ffunction-sections -fdata-sections.
+ Assembly functions should get their own sections as well so that
+ everything looks consistent.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 3ace2527ba80bd2fe1bceaab50d0b3c4fb5dd020
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Fri May 2 15:21:40 2008 +0200
+
+ avr32: Rename pm_init() as clk_init() and make SoC-specific
+
+ pm_init() was always more about clock initialization than anything
+ else. Dealing with PLLs, clock gating and such is also inherently
+ SoC-specific, so move it into a SoC-specific directory.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 4f5972c3b2454c22957f2842cfe64ec8118e015b
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed Apr 30 16:15:57 2008 +0200
+
+ avr32: Use new-style Makefile for the at32ap platform
+
+ This makes it easier to avoid compiling certain files later.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit a9b2bb78a1bd8ebdb633509bdd1c8134d527b213
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed Apr 30 14:36:47 2008 +0200
+
+ avr32: Remove unused file cpu/at32ap/pm.c
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 44453b25b06426eef0b7b2fa7c026fdf19ce34f2
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed Apr 30 14:19:28 2008 +0200
+
+ avr32: Clean up the HMATRIX code
+
+ Rework the HMATRIX configuration interface so that it becomes easier
+ to configure the HMATRIX for boards with special needs, and add new
+ parts.
+
+ The HMATRIX header file has been split into a general,
+ chip-independent part with register definitions, etc. and a
+ chip-specific part with SFR bitfield definitions and master/slave
+ identifiers.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 0a2e48792dd372c90b80059f3235e67a567e16fc
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Thu Nov 22 12:14:11 2007 +0100
+
+ avr32: Add support for the ATSTK1006 board
+
+ This is a replacement for ATSTK1002 with 64MB SDRAM and NAND flash on
+ board. It's currently in production and will be available soon.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 781eb9a1e4af4bd34c138e6126ec5cc6dd4b5440
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Tue Apr 29 12:53:05 2008 +0200
+
+ avr32: Get rid of the .flashprog section
+
+ The .flashprog section was only needed back when we were running
+ directly from flash, and it's even more useless on NGW100 since it
+ uses the CFI flash driver which never used this workaround in the
+ first place.
+
+ Remove it on STK1000 as well, and get rid of all the associated code and
+ annotations.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit cdd42c0c7a5205fc380912d83229069a71ea3abf
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Wed Apr 30 13:09:56 2008 +0200
+
+ avr32: Use correct condition around macb clock accessors
+
+ get_macb_pclk_rate() and get_macb_hclk_rate() should be available when
+ the chip has a MACB controller, not when it has a USART.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit f793a3581901ff39c2abb94012d9bbc8573ccf02
+Author: David Brownell <david-b@pacbell.net>
+Date: Wed Apr 16 22:57:58 2008 -0700
+
+ avr32: Disable the AP7000 internal watchdog on startup
+
+ This patch forces the watchdog off in all cases. That will at least
+ get rid of the constant reboot cycle, though it won't let the watchdog
+ actually run in the new kernels: its probe() comes up with a polite
+ warning.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 55ac7a7490b55da56659f95d82a0c83b9756df27
+Author: David Brownell <david-b@pacbell.net>
+Date: Fri Feb 22 12:54:39 2008 -0800
+
+ avr32: stk1002 and ngw100 convergence
+
+ Make STK1002 and NGW100 boards act more alike:
+ - STK boards can use as many arguments as NGW
+ - STK boards don't need to manage FPGAs either
+ - NGW commands should match STK ones
+
+ Also spell U-Boot right in prompts for STK1002 and NGW100.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+ [haavard.skinnemoen@atmel.com: update STK100[34] as well]
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 5e1882df6a3efc7de5524d28cea4ecde7d163d54
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Tue May 27 13:47:00 2008 +0200
+
+ Socrates: Fix PCI bus frequency report
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit 791e1dba8de76ad8e762a7badb869f224a1f8b82
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Tue May 27 11:49:13 2008 +0200
+
+ Socrates: Added USB support.
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit 5a904e5637cff1d708dc67098004f83ba9e84c54
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Tue May 27 11:35:02 2008 +0200
+
+ USB: add new configuration variable CONFIG_PCI_OHCI_DEVNO
+
+ In case of several PCI USB controllers on a board this variable
+ specifys which controller to use.
+ See doc/README.generic_usb_ohci for details.
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit 2f7468aeba60e1288030a8d007c4e63bd3f13221
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Tue May 27 10:36:07 2008 +0200
+
+ Socrates: add support for DS75 Digital Thermo Sensor on I2C bus.
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit 83e9d7a2614d4006b92690afa3390c291734267e
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Mon May 26 18:16:04 2008 +0200
+
+ Socrates: Config file cleanup.
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit 602cac1389b755b223272f2328a47e6f8c240848
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat May 24 12:47:46 2008 +0200
+
+ MAKEALL: add at91 list
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 290ef6436838b1cc013bd67e0e0495c9eb3e23c0
+Author: Ron Madrid <ron_madrid@sbcglobal.net>
+Date: Fri May 23 15:37:05 2008 -0700
+
+ Add Marvell 88E1118 support for TSEC
+
+ Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 557b377d8bfc8b833b6e749457bcdfa298331a24
+Author: Jens Gehrlein <sew_s@tqs.de>
+Date: Mon May 5 14:06:11 2008 +0200
+
+ smc911x: add 16 bit support
+
+ Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 6324e5bec8825f7fee3026ffbd394454ae8b53fb
+Author: Christian Eggers <ceggers@gmx.de>
+Date: Wed May 21 21:29:10 2008 +0200
+
+ Fix endianess conversion in usb_ohci.c
+
+ Sorry, I forgot this line:
+
+ Signed-off-by: Christian Eggers <ceggers@gmx.de>
+
+ I think this must be swapped (result may be equal).
+
+commit c918261c6d9f265f88baf70f8a73dfe6f0cb9596
+Author: Christian Eggers <ceggers@gmx.de>
+Date: Wed May 21 22:12:00 2008 +0200
+
+ USB: replace old swap_ with proper endianess conversion macros
+
+ Signed-off-by: Christian Eggers <ceggers@gmx.de>
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit fb63939b4fe140849cdba69f9e64a3e0e2f3ce1c
+Author: Christian Eggers <ceggers@gmx.de>
+Date: Wed May 21 21:29:10 2008 +0200
+
+ Fix endianess conversion in usb_ohci.c
+
+ Signed-off-by: Christian Eggers <ceggers@gmx.de>
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 477434c63c2ea5baa5c6c4e43500786f436511ff
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Thu May 22 01:15:53 2008 +0200
+
+ USB: add support for multiple PCI OHCI controllers
+
+ Add new configuration variable CONFIG_PCI_OHCI_DEVNO.
+ In case of several PCI USB controllers on a board this variable
+ specifys which controller to use.
+
+ Also add USB support for sokrates board.
+
+ See doc/README.generic_usb_ohci for details.
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit ce6754df61cbe23b5b73d095a00ac9a8504b3d77
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed May 21 16:56:08 2008 +0200
+
+ Fix some whitespace issues
+
+ introduced by 53677ef18 "Big white-space cleanup."
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4416603aeb06861b468b06a981e52c3ff805db7b
+Author: York Sun <yorksun@freescale.com>
+Date: Mon May 12 14:36:39 2008 -0500
+
+ Make ads5121 out-of-tree compiling safe
+
+ Reuse the existing DIU driver in board/freescale/common.
+
+ Signed-off-by: York Sun <yorksun@freescale.com>
+
+commit 0e1bad47cd345c76c91a64caf41011e431b62599
+Author: York Sun <yorksun@freescale.com>
+Date: Mon May 5 10:20:01 2008 -0500
+
+ Adding DIU support for Freescale 5121ADS
+
+ Add DIU and cfb console support to FSL 5121ADS board.
+
+ Use #define CONFIG_VIDEO in config file to enable fb console.
+
+ Signed-off-by: York Sun <yorksun@freescale.com>
+
+commit a48ff68d235e671176f6b496c44246dbe5e0a93f
+Author: York Sun <yorksun@freescale.com>
+Date: Mon May 5 10:20:00 2008 -0500
+
+ Replace DPRINTF with debug
+
+ Remove DPRINTF macro and replace it with generic debug macro.
+
+ Signed-off-by: York Sun <yorksun@freescale.com>
+
+commit 3b80c5f574ad7f6e1c55a68f42752b427fdf778d
+Author: York Sun <yorksun@freescale.com>
+Date: Mon May 5 10:19:59 2008 -0500
+
+ Move pixel clock setting to board file
+
+ The clock divider has different format in 5121 and 8610. This patch moves it to
+ board specific code.
+
+ Signed-off-by: York Sun <yorksun@freescale.com>
+
+commit 53677ef18e25c97ac613349087c5cb33ae5a2741
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue May 20 16:00:29 2008 +0200
+
+ Big white-space cleanup.
+
+ This commit gets rid of a huge amount of silly white-space issues.
+ Especially, all sequences of SPACEs followed by TAB characters get
+ removed (unless they appear in print statements).
+
+ Also remove all embedded "vim:" and "vi:" statements which hide
+ indentation problems.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2f845dc2bdf461bfee9fa25823f769f5db9eba0b
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Thu May 8 17:46:23 2008 +0200
+
+ socrates: fix second TSEC configuration (it is actually TSEC3)
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit 793670c3c0f0f72caead62f0be9fc3d9fbc6060f
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Thu May 8 14:17:08 2008 +0200
+
+ Fixed reset for socrates
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit e18575d5f589a62e19c70d471d4b4e27cad3af56
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Wed May 7 15:10:49 2008 +0200
+
+ socrates: changes to support FDT
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5d108ac8f435924c624cd6aaacd44f35f5cf94c0
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Wed Apr 30 11:42:50 2008 +0200
+
+ Initial support for "Socrates" board
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit 0e15ddd11f1a84c465e434eb051d2ef08ef02b9b
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Thu May 8 15:46:42 2008 +0200
+
+ POST: replace the LOGBUFF_INITIALIZED flag in gd->post_log_word (1 << 31) with the GD_FLG_LOGINIT flag in gd->flags.
+
+ This way we become able to utilize the full post_log_word for POST
+ activities (overwise, POST ECC, which has 0x8000 ID, could be
+ erroneously treated as started in post_output_backlog() even if there
+ was actually no POST ECC run (because of OCM POST failure, for
+ example).
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 7845d49094c81321021b50a4dbb8864d2f3777e4
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Thu May 8 15:46:02 2008 +0200
+
+ POST: mark OCM test as POST_STOP
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 28a385065882d6cb6ac5f443311ff87887ed7c13
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Thu May 8 15:45:26 2008 +0200
+
+ POST: add POST_STOP flag
+
+ Don't run futher tests in case of a test fails that is marked as
+ POST_STOP.
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit a525145d8110d15b4389d23c3ea8a78f22509d3f
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Thu May 8 15:44:16 2008 +0200
+
+ POST: switch CFG_POST_OCM with CFG_POST_CODEC (workaround)
+
+ Switch the OCM testid with the codec one. The reason is that current
+ implementation requires the POST_ROM testid to fit into lower 16
+ bits, and the codec test will never run with POST_ROM hopefully.
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 8b96c788d58f7cb85a89ee3f19c9b335d22443cd
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Thu May 8 15:43:28 2008 +0200
+
+ lwmon5: enable OCM post test on lwmon5 board
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 6e8ec682268493b8d098f99e17b1ce71b4448977
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Thu May 8 15:42:47 2008 +0200
+
+ POST: OCM test added.
+
+ Added OCM test to POST layer. This version runs before all other tests
+ but doesn't yet interrupt post sequence on failure.
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 6891260bdd935a382c95d9fa333922b0dfded68a
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Thu May 8 15:40:39 2008 +0200
+
+ POST: typo fix
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit 727f63334676e760877d43bfb8f0e9331ac8b101
+Author: Hebbar <gururajakr@sanyo.co.in>
+Date: Tue May 20 02:16:36 2008 -0700
+
+ common/usb.c: fix incorrect escape sequence
+
+ Signed off by: Gururaja Hebbar <gururajakr@sanyo.co.in>
+
+commit 4ce1e23b5e12283579828b3d23e8fd6e1328a7aa
+Author: York Sun <yorksun@freescale.com>
+Date: Thu May 15 15:26:27 2008 -0500
+
+ Fix 8313ERDB board configuration
+
+ Change LCRR clock ratio from 2 to 4 to commodate VSC7385.
+ Correct TSEC1 vs TSEC2 assignment.
+ Define ETHADDR and ETH1ADDR always.
+
+ Signed-off-by: York Sun <yorksun@freescale.com>
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit 2c289e320dcfb3760e99cf1d765cb067194a1202
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Mon May 19 09:47:25 2008 -0500
+
+ mpc86xx: Removed unused and unconfigured memory test code.
+
+ Besides, other common code exists.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 180a90abdae72587c0f679edf8991455e559440d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon May 19 12:47:11 2008 +0200
+
+ Release v1.3.3
+
+ Update CHANGELOG for release.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 16bedc661de0dae767b1377d8413373a3fbcfa79
+Author: Stefan Roese <sr@denx.de>
+Date: Mon May 19 07:14:38 2008 +0200
+
+ ppc4xx: Canyonlands: Disable PCIe0/SATA in dev-tree depending on selection
+
+ When SATA is selected (via jumper J6) we need to disable the first PCIe
+ node in the device tree, so that Linux doesn't initialize it. Otherwise
+ the Linux SATA driver will fail to detect the devices.
+
+ The same goes the other way around too. So if PCIe is selected we need
+ to disable the SATA node in the device tree.
+
+ This is because PCIe port 0 and SATA on 460EX share the same pins
+ (multiplexed) and we have to configure in U-Boot which peripheral is
+ enabled.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3cc27b426aeefe2930f911692e9df3143fb2565f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 18 19:09:58 2008 +0200
+
+ i386: Fix multiple definitions of __show_boot_progress
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 311f3446930c1e64c12026c1cfd00500b05be52d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 18 19:09:57 2008 +0200
+
+ sc530_spunk: add missing SOBJS entry
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit a559317143b4f95927b08cd388707e6f077e95fa
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 18 19:09:56 2008 +0200
+
+ sc520_spunk: Fix flash
+
+ flash.c:593: warning: dereferencing type-punned pointer will break strict-aliasing rules
+ flash.c:398: error: label at end of compound statement
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 91f221317af64191ee8caf303ea9305943158691
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 18 19:09:49 2008 +0200
+
+ drivers/pcmcia: add missing i82365
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit dd223944132f97ffa52977ea95e5a52428f5cc2f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 18 19:09:47 2008 +0200
+
+ i386/bootm: remove unused var
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit a9da341df19b32ad2ecb58ce529f7e4fada7814e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 18 19:09:45 2008 +0200
+
+ example/gitignore: update with all generated examples
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit a38dc3ea8614f8b0c41e432b445a9959b9711295
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu May 15 00:42:45 2008 +0200
+
+ TQM8272: fix out-of-tree building
+
+ ...and add to MAKEALL script
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4f805c1e3a60b9263da8ec3bcd1f45edcefa7dcf
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed May 14 23:34:53 2008 +0200
+
+ environment: fix bug introduced by commit a8409f4f1ac8
+
+ env_get_char is not a function, but a pointer to one.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0c11935cd62ca1f65eeb228ff4c848440d4553bf
+Author: Gary Jennejohn <garyj@denx.de>
+Date: Wed May 14 13:39:22 2008 +0200
+
+ ppc4xx: QUAD100HD: Allow the environment to be put into flash.
+
+ After moving TEXT_BASE the value for CFG_ENV_ADDR was incorrect. Also
+ use a redundant environment.
+
+ Signed-off-by: Gary Jennejohn <garyj@denx.de>
+
+commit cda2a4a9961fd4341b7db305cb22fc05957e8b77
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed May 14 13:55:30 2008 +0200
+
+ Fix config files for out-of-tree building
+
+ Several board/<...>/config.mk files include dynamically built (by
+ the Makefile) config files but used the wrong file name of
+ $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+ instead if the correct
+ $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+ The bug is nasty because the build result is correct for the (normal)
+ in-tree builds, and because 'sinclude' is used no errors get raised
+ even for out-of-tree build tests. But out-of-tree builds use an
+ incomplete and thus usually incorrect configuration...
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2dd7082e06d580404010b06fe4e0e8b7038a00c8
+Author: Stefan Roese <sr@denx.de>
+Date: Wed May 14 13:40:03 2008 +0200
+
+ ppc4xx: Fix bogus Canyonlands config.mk
+
+ This patch fixes the canyonlands config.mk file to enable correct
+ out-of-tree builds. Thanks to Wolfgang Denk for spotting this.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit fdd1247a66d788a3446244f6fde9955a93c26322
+Author: Stefan Roese <sr@denx.de>
+Date: Wed May 14 10:32:32 2008 +0200
+
+ ppc4xx: Individual handling of ddr2_fixed.c for canyonlands_nand build
+
+ Canyonlands has a file ddr2_fixed.c which needs special treatment when
+ building in separate directory. It has to be linked to build directory
+ otherwise it is not seen.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a8409f4f1ac84c36273c1a1e341189662521bcfb
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed May 14 12:22:49 2008 +0200
+
+ environment: cleanup prototype declarations of env functions.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit cf39b07948015c480b72a6e732cf7d839aa93a9e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed May 14 12:21:48 2008 +0200
+
+ linkstation_HGLAN: Fix out of tree building.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 085551c05ca09e6c491ea11a1c6727a36776a545
+Author: Stefan Roese <sr@denx.de>
+Date: Wed May 14 10:32:32 2008 +0200
+
+ ppc4xx: Individual handling of ddr2_fixed.c for canyonlands_nand build
+
+ Canyonlands has a file ddr2_fixed.c which needs special treatment when
+ building in separate directory. It has to be linked to build directory
+ otherwise it is not seen.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1510b82d50615f344e89d42533e8224cce067dc0
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue May 13 23:15:52 2008 +0200
+
+ Makefile: fix "error: version_autogenerated.h: No such file or directory"
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 54694a91428f6c3280fe1ee0923488a1e7e8dbc4
+Author: Stelian Pop <stelian@popies.net>
+Date: Tue May 13 17:31:24 2008 +0200
+
+ Cleanup nand_info[] declaration.
+
+ The nand_info array is declared as extern in several .c files.
+ Those days, nand.h contains a reference to the array, so there is
+ no need to declare it elsewhere.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 70fab1908fc1734a403711eaabbef546bc4b77dc
+Author: Stefan Roese <sr@denx.de>
+Date: Tue May 13 20:22:01 2008 +0200
+
+ ppc4xx: Add 405EX(r) revision C PVR definitions and detection code
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 65dcfa79204f4750b905a173a5365e0b2eb6c2f6
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon May 12 01:11:21 2008 +0200
+
+ Revert "pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option"
+
+ This reverts commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2
+ which broke many PowerPC boards.
+
+commit ee0cfa70803a3e629ea581a9b216f8ecef402bfc
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon May 12 00:56:28 2008 +0200
+
+ Revert "Avoid initrd and logbuffer area overlaps"
+
+ This reverts commit 1b5605ca57fbb364f4d78eeee28b974ed875e888
+ which breaks building on all PPC boards that don't use a log buffer.
+
+commit 02b9b22446e3d7ad6a6382be17a1ce79a7de589b
+Author: Nick Spence <nick.spence@freescale.com>
+Date: Sat May 10 14:02:04 2008 -0700
+
+ Fix offset calculation for multi-type legacy images.
+
+ Calculation of tail was incorrect when size % 4 == 0.
+
+ New code removes the conditional and does the same thing but with arithmetic
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+
+commit c9dca3c3f37d2647aec4509b24b16d15882ae3e4
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon May 12 00:40:58 2008 +0200
+
+ Revert "Change env_get_char from a global function ptr to a function."
+
+ This reverts commit c0559be371b2a64b1a817088c3308688e2182f93
+ which is known to break booting from dataflash and NAND.
+
+commit 20e5ed137483823aaea5178169f3b144c7a4d9e0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 11 23:13:57 2008 +0200
+
+ API: remove duplicate syscall check
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 67e3beb52c320b0a31cf030716c99392cde2d532
+Author: Stelian Pop <stelian@popies.net>
+Date: Fri May 9 21:46:51 2008 +0200
+
+ AT91: Cleanup unused config header file definitions.
+
+ CONFIG_ENV_OVERWRITE is commented out in the config header files,
+ so let's cleanup the files by removing the whole definition.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 19883aede2ac0a522493bfb2b35a7dbb200071b1
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu May 8 14:52:34 2008 +0200
+
+ Support AT91CAP9 revC CPUs
+
+ The AT91CAP9 revC CPU has a few differences over the previous,
+ revB CPU which was distributed in small quantities only (revA was
+ an internal Atmel product only).
+
+ The revC silicon needs a special initialisation sequence to
+ switch from the internal (imprecise) RC oscillator to the
+ external 32k clock.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 098b7b4b441b12c2a64dd517930f43c793542759
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu May 8 14:52:33 2008 +0200
+
+ Use custom logo for Atmel boards
+
+ This patch adds a custom vendor logo for the Atmel AT91 boards.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 761c70b80cdd3bead40146b96a8e713d6ae01632
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu May 8 14:52:32 2008 +0200
+
+ AT91SAM9RLEK: hook up the ATMEL LCD driver
+
+ This patch makes the necessary adaptations (PIO configurations and
+ defines in config header file) to hook up the Atmel LCD driver to the
+ AT91SAM9RLEK board.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 56a2479cd7fecabdd91348a775b2801dd2e65c7f
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu May 8 14:52:31 2008 +0200
+
+ AT91SAM9263EK: hook up the ATMEL LCD driver
+
+ This patch makes the necessary adaptations (PIO configurations and
+ defines in config header file) to hook up the Atmel LCD driver to the
+ AT91SAM9263EK board.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 820f2a958325061a446115f3035e48e4726b3390
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu May 8 14:52:30 2008 +0200
+
+ AT91SAM9261EK: hook up the ATMEL LCD driver
+
+ This patch makes the necessary adaptations (PIO configurations and
+ defines in config header file) to hook up the Atmel LCD driver to the
+ AT91SAM9261EK board.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c139b17d20c8371c1e0a8d7fb27c11050cf86304
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu May 8 14:52:29 2008 +0200
+
+ AT91CAP9ADK: hook up the ATMEL LCD driver
+
+ This patch makes the necessary adaptations (PIO configurations and
+ defines in config header file) to hook up the Atmel LCD driver to the
+ AT91CAP9ADK board.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 39cf480484fcce5c04a590ee1c30be0c17b02c34
+Author: Stelian Pop <stelian@popies.net>
+Date: Fri May 9 21:57:18 2008 +0200
+
+ Add ATMEL LCD driver
+
+ This patch adds support for the ATMEL LCDC driver which is used on some
+ AT91 and AVR platforms.
+
+ Is has been tested with the AT91CAP9ADK, AT91SAM9261EK, AT91SAM9263EK and
+ AT91SAM9RLEK boards. Adaptation for AVR32 should probably be easy.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2118ebb44dc40f8117c94950fd95799a9ef821b2
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu May 8 18:52:25 2008 +0200
+
+ AT91SAM9RLEK support
+
+ This patch adds support for the AT91SAM9RL chip and the AT91SAM9RLEK
+ board.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 8e429b3eee23927c1222679f6b6f53667b21595c
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu May 8 18:52:23 2008 +0200
+
+ AT91SAM9263EK support
+
+ This patch adds support for the AT91SAM9263 chip and the AT91SAM9263EK
+ board.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d99a8ff66d8ae87e5c87590ed2e4ead629540607
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu May 8 20:52:22 2008 +0200
+
+ AT91SAM9261EK support
+
+ This patch adds support for the AT91SAM9261 chip and the AT91SAM9261EK
+ board.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 86c8c8a414988c50104a3b02c29f50af2be738c0
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu May 8 20:52:21 2008 +0200
+
+ AT91SAM9260EK: Fix dataflash offsets in CONFIG_BOOTCOMMAND
+
+ This patch fixes the dataflash offsets used in CONFIG_BOOTCOMMAND
+ in order to cope with the changes in DataFlash partitionning scheme
+ (cset c3a60cb3).
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 96996ac25d5222611a8888968db6e53a6d3726da
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu May 8 20:52:20 2008 +0200
+
+ AT91SAM9260EK: Normalize BOOTARGS
+
+ This patch adapts CONFIG_BOOTARGS to the chosen boot method (boot from
+ DataFlash or from NAND), and gives to Linux a fully specified mtdparts
+ variable.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 79f0cb6e9c54d31a1d9e3f5e226a9bebc3c3a47a
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu May 8 20:52:19 2008 +0200
+
+ AT91SAM9260EK: Normalize SPI timings
+
+ This patch changes the SPI timings to closely match the ones
+ used by the Linux kernel and the Atmel's own bootstrap project.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c1212b2f5c5ed440bf8e9ebc8e4fd7488858b935
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu May 8 20:52:18 2008 +0200
+
+ AT91SAM9260EK: Handle 8 or 16 bit NAND
+
+ The Atmel boards can handle 8 or 16 bit NAND memories. This patch
+ makes the support configurable in the board config header file
+ (CFG_NAND_DBW_8 or CFG_NAND_DBW_16).
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ab52640fc01624e208424e527af0b7b3a5a65a12
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu May 8 20:52:17 2008 +0200
+
+ AT91CAP9ADK: Fix dataflash offsets in CONFIG_BOOTCOMMAND
+
+ This patch fixes the dataflash offsets used in CONFIG_BOOTCOMMAND
+ in order to cope with the changes in DataFlash partitionning scheme
+ (cset c3a60cb3).
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 3267508ec4c9e74c39ee41c9ae6951ad185fe270
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu May 8 20:52:16 2008 +0200
+
+ AT91CAP9ADK: Normalize BOOTARGS
+
+ This patch adapts CONFIG_BOOTARGS to the chosen boot method (boot from
+ DataFlash or from NAND), and gives to Linux a fully specified mtdparts
+ variable.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 93da48b910511911ce110656e17ed733c8ac4c45
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu May 8 20:52:15 2008 +0200
+
+ AT91CAP9ADK: Normalize SPI timings
+
+ This patch changes the SPI timings to closely match the ones
+ used by the Linux kernel and the Atmel's own bootstrap project.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1c90df3e148ce0a3e2c86c63b38b19d47772f2a0
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu May 8 20:52:14 2008 +0200
+
+ AT91CAP9ADK: Handle 8 or 16 bit NAND
+
+ The Atmel boards can handle 8 or 16 bit NAND memories. This patch
+ makes the support configurable in the board config header file
+ (CFG_NAND_DBW_8 or CFG_NAND_DBW_16).
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 11b162bae058e96c7929e358d4adff2bee6c2cc4
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu May 8 20:52:13 2008 +0200
+
+ Use a common u-boot.lds file across all AT91CAP9/AT91SAM9 platforms
+
+ All the AT91CAP9/AT91SAM9 boards have the same linker script. The patch
+ below avoids the duplication of u-boot.lds by putting the file in the
+ cpu directory instead of the board one.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d48abea4b89adaf5e45ea75b5e38c0d8de179ece
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu May 8 20:52:12 2008 +0200
+
+ Add proper copyright notices in Atmel boards Makefiles
+
+ The Makefiles for the AT91CAP9/AT91SAM9 boards have an incomplete
+ copyright notice. This patch adds the missing pieces.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e817a042cef6164bf26fee86f90326f2ec9e6745
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu May 8 20:52:11 2008 +0200
+
+ Add copyright information in Atmel boards partition.c
+
+ When Ulf did the dataflash.c cleanup, he didn't add his copyright on
+ the new created files. This patch fixes the problem.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 4f6c810106f4f76d83cfc57d98f4540cd45f9a19
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu May 8 20:52:10 2008 +0200
+
+ Update origin and copyright information in arch-at91sam9 header files
+
+ When doing the AT91CAP9/AT91SAM9 port, a number of header files were
+ copied from the Linux kernel sources. This patch explicitly specifies
+ this origin for all the copied headers, and for those missing copyright
+ information, adds it.
+
+ Additionaly, the header file 'at91sam926x_mc.h' has been superceeded
+ in the latest kernel sources by 'at91sam9_smc.h'.
+
+ The copyright information has been confirmed by the AT91 Linux kernel
+ maintainer, Andrew Victor <avictor.za@gmail.com>.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 79dd1712689d6a5031d7cbff54957049680751c7
+Author: Markus Klotzbücher <mk@denx.de>
+Date: Thu May 8 16:00:55 2008 +0200
+
+ ppc4xx: Kilauea: Add CONFIG_BOOTP_SUBNETMASK to Kilauea board config
+
+ When using dhcp/bootp the "netmask" environment variable is not set
+ because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
+ desireable, so the following patch adds this this option to the board
+ config.
+
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 869d14b4cc2e47de2ddcb117bad0407a44436684
+Author: Stefan Roese <sr@denx.de>
+Date: Sat May 10 10:30:36 2008 +0200
+
+ ppc4xx: Update Makalu defconfig to use device-tree booting as default
+
+ This patch reworks the default environment on Makalu. Now "net_nfs" for
+ example uses the device-tree style booting formerly know as "net_nfs_fdt".
+ Also the addresses in RAM were changed because of the new image booting
+ support, which check for image overwriting. So the addresses needed to
+ get adjusted.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f3612a7b199cab3942f60d9c1392eb39d58cc699
+Author: Becky Bruce <bgill@freescale.com>
+Date: Wed May 7 13:28:16 2008 -0500
+
+ PPC: fix map_physmem build warning
+
+ map_physmem currently generates a warning when CONFIG_PHYS_64BIT is
+ enabled. This quiets the warning.
+
+ Signed-off-by: Becky Bruce <Becky.Bruce@freescale.com>
+
+commit 36f32675f40292002ee1fed252c180a43022d2d4
+Author: Becky Bruce <bgill@freescale.com>
+Date: Wed May 7 13:24:57 2008 -0500
+
+ Update pci code to use phys_addr_t
+
+ Physical addrs need to be represented by phys_addr_t, not
+ unsigned long. Otherwise, systems that use CONFIG_PHYS_64BIT
+ are going to fail mightily.
+
+ Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 91a616741fc128cdb88f39bddcd4d72fe17466d0
+Author: Nick Spence <nick.spence@freescale.com>
+Date: Thu May 8 22:32:22 2008 -0700
+
+ Support legacy multi-type images without FDT section.
+
+ This patch enables legacy multi-type images containing only a Linux kernel
+ and root file system to be loaded, maintaining compatibility with previous
+ versions of u-boot.
+
+ This is required when using old image files such as a Linux 2.4 kernel /
+ filesystem.
+
+ Signed-off-by: Nick Spence <nick.spence@freescale.com>
+ Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 881031d9732783b7aeae2198fc7eb480ae8974a6
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 10 00:38:02 2008 +0200
+
+ Update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e5e9d6c9c08160be7e5a36e04d125ccce99b8774
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 10 00:36:09 2008 +0200
+
+ post/cpu/ppc4xx/Makefile: line length cleanup
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit cce9cfdabcf416ecd2aacc3681c91e5378c75a3d
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu May 8 22:52:09 2008 +0200
+
+ Fix @ -> <at> substitution
+
+ When applying the AT91CAP9 patches upstream, something transformed
+ the '@' character into the ' <at> ' sequence.
+
+ The patch below restores the original form in all the places where
+ it has been modified (the AT91CAP9 files, the AT91SAM9260 files which
+ were copied from AT91CAP9, and a couple of other files where the
+ ' <at> ' sequence was present).
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit 9606b3c81b3c47a1d58514e9a232c6f461a17597
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu May 8 22:52:10 2008 +0200
+
+ Update origin and copyright information in arch-at91sam9 header files
+
+ When doing the AT91CAP9/AT91SAM9 port, a number of header files were
+ copied from the Linux kernel sources. This patch explicitly specifies
+ this origin for all the copied headers, and for those missing copyright
+ information, adds it.
+
+ Additionaly, the header file 'at91sam926x_mc.h' has been superceeded
+ in the latest kernel sources by 'at91sam9_smc.h'.
+
+ The copyright information has been confirmed by the AT91 Linux kernel
+ maintainer, Andrew Victor <avictor.za@gmail.com>.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit ceb6b4fbe1dcc40bb672ef8133ddf4813e97cbb1
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu May 8 22:52:11 2008 +0200
+
+ Add copyright information in Atmel boards partition.c
+
+ When Ulf did the dataflash.c cleanup, he didn't add his copyright on
+ the new created files. This patch fixes the problem.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit 2ab02fd456d8ef92ae9f5439618d1fa7ca16e5f3
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Thu May 8 10:09:27 2008 +0200
+
+ mx31ads: fix 32kHz clock handling
+
+ According to schematics and to RedBoot sources, the MX31ADS uses a 32768Hz
+ oscillator as a SKIL source. Fix previously wrongly assumed 32000Hz value.
+ Also fix a typo when verifying a jumper configuration. While at it, make
+ two needlessly global functions static.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 1b5605ca57fbb364f4d78eeee28b974ed875e888
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed May 7 13:10:04 2008 +0200
+
+ Avoid initrd and logbuffer area overlaps
+
+ Add logbuffer to reserved LMB areas to prevent initrd allocation
+ from overlaping with it.
+
+ Make sure to use correct logbuffer base address.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit c59518e15949b3403df5c5b0c2c48ea0e5bea24b
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed May 7 13:08:54 2008 +0200
+
+ ppc: Cleanup get_effective_memsize() use
+
+ Removed duplicated effective memory size calculation code.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 273c37d843d5b581090378016cd12dd9c586907b
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Wed May 7 09:03:53 2008 +0200
+
+ Fix build errors when CONFIG_LOGBUFFER and CONFIG_FIT are enabled
+
+ Recent modifcations to LOGBUFFER handling code were incorrecly
+ introduced to fit_check_kernel() routine during
+ "Merge branch 'new-image' of git://www.denx.de/git/u-boot-testing",
+ commit 27f33e9f45ef7f9685cbdc65066a1828e85dde4f.
+
+ This patch cleans up this merge issue.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit bc11756daff89a3de09ca80adac962b88cf06e6e
+Author: Grant Erickson <gerickson@nuovations.com>
+Date: Tue May 6 20:16:15 2008 -0700
+
+ Propagate Error Status to the Shell on fw_printenv Errors
+
+ Changed implementation such that fw_printenv returns failure status
+ when one or more specified variables do not exist or when incorrect
+ command syntax is used.
+
+ This aids scripting fw_printenv such that the script can key of the
+ return status rather than relying on standard error "scraping".
+
+ Signed-off-by: Grant Erickson <gerickson@nuovations.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f3b6d528e4dd719640a4bfcd954f4e4c7f5db0d6
+Author: Grant Erickson <gerickson@nuovations.com>
+Date: Tue May 6 16:18:00 2008 -0700
+
+ Fix Compilation Errors with 'tools/env/fw_printenv'
+
+ In the current top-of-tree, 1.3.3.-rc2, the optional tool
+ 'tools/env/fw_printenv' fails to compile for two reasons:
+
+ 1) The header watchdog.h cannot be found.
+ 2) The header zlib.h is picked up from the tool chain rather than the
+ project causing a prototype conflict for crc32.
+
+ This patch addresses both of these issues.
+
+ Platforms Tested On:
+ - AMCC "Kilauea"
+
+ Signed-off-by: Grant Erickson <gerickson@nuovations.com>
+
+commit 597f6c26a18b389903a64692bacbf9a1ca69355b
+Author: James Yang <James.Yang@freescale.com>
+Date: Mon May 5 10:22:53 2008 -0500
+
+ Fix readline_into_buffer() with CONFIG_CMDLINE_EDITING before relocating
+
+ When CONFIG_CMDLINE_EDITING is enabled, readline_into_buffer() doesn't
+ work before relocating to RAM because command history is written into
+ a global array that is not writable before relocation. This patch
+ defers to the no-editing and no-history code in readline_into_buffer()
+ if it is called before relocation.
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 726c0f1e5f108dccea052965123b95837d2bd402
+Author: Detlev Zundel <dzu@denx.de>
+Date: Mon May 5 16:11:22 2008 +0200
+
+ cosmetic: Adjust coding style for switch statements to be consistent
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 574b319512b13e10800f0045e39b993f4ca25e42
+Author: Detlev Zundel <dzu@denx.de>
+Date: Mon May 5 16:11:21 2008 +0200
+
+ Fix disk type output in disk/part.c
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 045b4d2d7168ef09c7349dcf6ecebe7432b74171
+Author: Vlad Lungu <vlad.lungu@windriver.com>
+Date: Mon May 5 14:20:03 2008 +0300
+
+ Mail address change, documentation modified
+
+ Signed-off-by: Vlad Lungu <vlad.lungu@windrvier.com>
+
+commit 4d49b28038e2819088e8356a77212fc95a89ce5a
+Author: Michal Simek <monstr@monstr.eu>
+Date: Sun May 4 15:42:41 2008 +0200
+
+ microblaze: Repare intc handling
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 878b3b1e193e570caf3e96ad8e31e561f68d0287
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun May 4 15:17:52 2008 +0200
+
+ include/gitignore: update to all architectures
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1df368aed3b8bc240fe1595d290b0e91b22961da
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Mon May 5 02:12:06 2008 +0200
+
+ ide: Remove spurious second include of io.h
+
+ Removed the second include, with all the #ifdef around as suggested by Wolfgang.
+
+ Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
+
+commit 8fbc985bdad09b23b7eb4df1d2ea589619d8db4c
+Author: Adrian Filipi <adrian.filipi@eurotech.com>
+Date: Tue May 6 16:46:37 2008 -0400
+
+ Fix some typos
+
+ This patch fixes three typos.
+ The first is a repetition of CONFIG_CMD_BSP.
+ The second makes the #endif comment match its #if.
+ The third is a spelling error.
+
+ Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
+
+commit e419e12d04ae3b280c99a87a2ea4ad7a40628bcb
+Author: Grant Erickson <gerickson@nuovations.com>
+Date: Sun May 4 16:45:01 2008 -0700
+
+ Recognize 'powerpc' As an Alias for IH_ARCH_PPC
+
+ Add support for the recognition of 'powerpc' as an alias for the PowerPC
+ architecture type since Linux is already trending in that direction,
+ preferring 'powerpc' to 'ppc'.
+
+ Signed-off-by: Grant Erickson <gerickson@nuovations.com>
+
+commit f5a24259190c388c2527bdc49fee34577d862cc7
+Author: Wheatley Travis <Travis.Wheatley@freescale.com>
+Date: Fri May 2 13:35:15 2008 -0700
+
+ 7450 and 86xx L2 cache invalidate bug corrections
+
+ The 7610 and related parts have an L2IP bit in the L2CR that is
+ monitored to signal when the L2 cache invalidate is complete whereas the
+ 7450 and related parts utilize L2I for this purpose. However, the
+ current code does not account for this difference. Additionally the 86xx
+ L2 cache invalidate code used an "andi" instruction where an "andis"
+ instruction should have been used.
+
+ This patch addresses both of these bugs.
+
+ Signed-off-by: Travis Wheatley <travis.wheatley@freescale.com>
+ Acked-By: Jon Loeliger <jdl@freescale.com>
+
+commit 4d31cdc45d3592a5545a649fb5a24b458a4e4b72
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 9 10:16:13 2008 +0200
+
+ Avoid infinite loop "Generating include/autoconf.mk"
+
+ Fix a bogus circular dependency that caused an infinite loop of
+ "Generating include/autoconf.mk" again and again.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 567fb852178dbf59529d7301620a3f3732a4b02d
+Author: Stelian Pop <stelian@popies.net>
+Date: Thu May 8 22:52:09 2008 +0200
+
+ Fix @ -> <at> substitution
+
+ When applying the AT91CAP9 patches upstream, something transformed
+ the '@' character into the ' <at> ' sequence.
+
+ The patch below restores the original form in all the places where
+ it has been modified (the AT91CAP9 files, the AT91SAM9260 files which
+ were copied from AT91CAP9, and a couple of other files where the
+ ' <at> ' sequence was present).
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 73ccb3410a0785593cda7aee455dfc51f790e281
+Author: Gary Jennejohn <gary.jennejohn@freenet.de>
+Date: Mon Apr 28 14:04:32 2008 +0200
+
+ ppc4xx: Add the Harris QUAD100HD AMCC 405EP-based board
+
+ Signed-off-by: Gary Jennejohn <garyj@denx.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ef2642625cbfb1c3695e3478d08ae515052a4950
+Author: Stefan Roese <sr@denx.de>
+Date: Thu May 8 11:10:46 2008 +0200
+
+ ppc4xx: Kilauea: Fix incorrect FPGA FIFO address
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a00eccfebc954ad9485161efeca7d9aaf626d530
+Author: Stefan Roese <sr@denx.de>
+Date: Thu May 8 11:05:15 2008 +0200
+
+ ppc4xx: Add fdt support to all remaining AMCC PPC4xx eval boards
+
+ This patch adds fdt (flattened device tree) support to all remaining AMCC
+ eval boards. Most newer boards already support device tree. With this patch,
+ all AMCC boards now enable device tree passing from U-Boot to Linux
+ arch/powerpc kernels.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cb5d88b9611e0c35c53543ad3b4ab99fa82203e3
+Author: Stefan Roese <sr@denx.de>
+Date: Thu May 8 11:01:09 2008 +0200
+
+ ppc4xx: Add weak default ft_board_setup() routine
+
+ This patch adds a default ft_board_setup() routine to the 4xx fdt code.
+ This routine is defined as weak and can be overwritten by a board specific
+ one if needed.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d1c1ba85c7915053adf6a8d14a08ac6fcb750d01
+Author: Stefan Roese <sr@denx.de>
+Date: Thu May 8 10:48:58 2008 +0200
+
+ ppc4xx: acadia: Add fdt support and fix section overlap problem
+
+ This patch adds fdt (flattened device tree) support to the AMCC
+ Acadia eval board. This increases the image size and it doesn't
+ fit anymore into 256kByte. Since we didn't want to remove features
+ from the configuration, we decided to increase the U-Boot image size
+ (add one flash sector).
+
+ Also changed the default environment definition to make it
+ independent of such changes.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4adb3023de75bc150f088c8935db340930ad38c8
+Author: Ira Snyder <iws@ovro.caltech.edu>
+Date: Tue Apr 29 11:18:54 2008 -0700
+
+ ppc4xx: Add device tree support to AMCC Yosemite
+
+ Add support for booting with a device tree blob. This is needed to boot
+ ARCH=powerpc kernels. Also add support for setting the eth0 mac address
+ via the ethaddr variable.
+
+ Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b9bbefce1a653ea35f74a66ec117cdda2e043a4b
+Author: Dave Mitchell <dmitchell@amcc.com>
+Date: Wed May 7 09:00:23 2008 -0700
+
+ ppc4xx: Fix typos in 460GT/EX FBDV array
+
+ Corrected two typos in the 460GT/EX FBDV array.
+
+ Signed-off-by: Dave Mitchell <dmitchell@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 66f5fa9263629271edc86178b1f224e3c9aab2b3
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed May 7 16:54:31 2008 -0500
+
+ 85xx: Limit CPU2 workaround to parts that have the errata
+
+ Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit a5fe514e8ace564300d2c1d73846ddff49654243
+Author: Lee Nipper <lee.nipper@freescale.com>
+Date: Fri Apr 25 15:44:45 2008 -0500
+
+ mpc83xx: system performance settings for MPC8349EMDS.
+
+ These same settings are used on MPC8349ITX, and
+ improve performance on MPC8349EMDS.
+
+ Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 49387dba910e485640b575e920ee463b7e611dc3
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue May 6 13:22:52 2008 +0900
+
+ [MIPS] cpu/mips/cache.S: Fix build warning
+
+ Some old GNU assemblers, such as v2.14 (ELDK 3.1.1), v2.16 (ELDK 4.1.0),
+ warns illegal global symbol references by bal (and jal also) instruction.
+ This does not happen with the latest binutils v2.18.
+
+ Here's an example on gth2_config:
+
+ mips_4KC-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0x90000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isy
+ stem /opt/eldk311/usr/bin/../lib/gcc-lib/mips-linux/3.3.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4k
+ c -EB -c -o cache.o cache.S
+ cache.S: Assembler messages:
+ cache.S:243: Warning: Pretending global symbol used as branch target is local.
+ cache.S:250: Warning: Pretending global symbol used as branch target is local.
+
+ In principle, gas might be sensitive to global symbol references in PIC
+ code because they should be processed through GOT (global offset table).
+ But if `bal' instruction is used, it results in PC-based offset jump.
+ This is the cause of this warning.
+
+ In practice, we know it doesn't matter whether PC-based reference or GOT-
+ based. As for this case, both will work before/after relocation. But let's
+ fix the code.
+
+ This patch explicitly sets up a target address, then jump there.
+ Here's an example of disassembled code with/without this patch.
+
+ 90000668: 1485ffef bne a0,a1,90000628 <mips_cache_reset+0x20>
+ 9000066c: ac80fffc sw zero,-4(a0)
+ 90000670: 01402821 move a1,t2
+ -90000674: 0411ffba bal 90000560 <mips_init_icache>
+ -90000678: 01803021 move a2,t4
+ -9000067c: 01602821 move a1,t3
+ -90000680: 0411ffcc bal 900005b4 <mips_init_dcache>
+ -90000684: 01a03021 move a2,t5
+ -90000688: 03000008 jr t8
+ -9000068c: 00000000 nop
+ +90000674: 01803021 move a2,t4
+ +90000678: 8f8f83ec lw t7,-31764(gp)
+ +9000067c: 01e0f809 jalr t7
+ +90000680: 00000000 nop
+ +90000684: 01602821 move a1,t3
+ +90000688: 01a03021 move a2,t5
+ +9000068c: 8f8f81e0 lw t7,-32288(gp)
+ +90000690: 01e0f809 jalr t7
+ +90000694: 00000000 nop
+ +90000698: 03000008 jr t8
+ +9000069c: 00000000 nop
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 0f8c62a14b523c56874ebcb67c1a16c99aad48b3
+Author: Vlad Lungu <vlad.lungu@windriver.com>
+Date: Mon May 5 14:04:00 2008 +0300
+
+ Allow building mips versions with ELDK 3.1.1
+
+ .gpword works only with local symbols on certain binutils versions
+
+ Signed-off-by: Vlad Lungu <vlad.lungu@windrvier.com>
+
+commit 12a67a9e51f6b3ec26cb0f077fb5685a447c359d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon May 5 12:52:36 2008 +0200
+
+ MAKEALL: add inka4x0 board
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit b83dcc13ae7b2dab394bfef6f699750d11490ee2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun May 4 21:34:23 2008 +0200
+
+ kb9202 board: fix build problem.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6adf61dc4cb5c53a2df990cbc8df2bceacbfd869
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun May 4 12:10:33 2008 +0200
+
+ Prepare for v1.3.3-rc3
+
+ Update ChNAGELOG, minor white space cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 7c0773fde6100b61be2558cb5d8c442a3194aecb
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun May 4 00:35:15 2008 +0200
+
+ drivers/net/tsec.c: Fix typo.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit aa737945e6f37a5de5dbad550a7694e0cb2a8120
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri May 2 21:45:12 2008 -0400
+
+ version_autogenerated.h: use printf rather than echo -n
+
+ Some systems are dumb and do not implement the -n flag to echo (like OS X).
+ Convert the Makefile to use printf as this should work everywhere.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4acc2a108ad0a669165924704a6cb083f9138242
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri May 2 18:17:50 2008 -0400
+
+ fix building when saveenv is disabled in some setups
+
+ If you enable environment in the flash, but disable the embedded
+ option, and you disable the saveenv command, then the #if nested
+ logic will trigger a compile failure:
+ env_flash.c: In function 'env_relocate_spec':
+ env_flash.c:399: error: 'flash_addr' undeclared (first use in this function)
+ The fix is to add CMD_SAVEENV ifdef protection like everywhere else.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit ccf1ad535ae1c0dc2d466235c668adbdfe3a55b7
+Author: Jeremy McNicoll <jeremy.mcnicoll@windriver.com>
+Date: Fri May 2 16:10:04 2008 -0400
+
+ SBC8548: fix address mask to allow 64M flash
+
+ Fix incorrect mask to enable all 64MB of onboard flash.
+ Previously U-Boot incorrectly mapped only 8MB of flash, this
+ patch correctly maps all the available flash.
+
+ Signed-off-by: Jeremy McNicoll <jeremy.mcnicoll@windriver.com>
+
+commit 3648085c464c8c22ef76fab006ca4344d3796124
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 2 19:48:56 2008 +0200
+
+ qemu_mips: add README
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6fdd002689190a0022c7b3dbab37fcba724580ce
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Fri May 2 02:35:59 2008 +0200
+
+ Fix misspelled comment
+
+ Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
+
+commit fa956fde60b7ec4dd66bd62f9910fd341b5049a1
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu May 1 04:13:05 2008 -0400
+
+ mkimage: make mmap() checks consistent
+
+ The mmap() related code is full of inconsistent casts/constants when
+ it comes to error checking, and may break when building on some
+ systems (like ones that do not implicitly define the caddr_t type).
+ Let's just avoid the whole mess by writing the code nice and clean in
+ the first place.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8e90cd0447a0f0ccf529ef86f0e6b56187d3b82a
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Thu May 1 09:05:34 2008 +0200
+
+ Fix defined but not used build warning
+
+ - warning: 'srom' defined but not used
+
+ Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
+
+commit b71190f3250aaffcc81c35f6cfd3498cb7c48013
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date: Thu May 1 09:05:26 2008 +0200
+
+ Fix implicit declaration build warnings
+
+ - warning: implicit declaration of function ‘serial_initialize’
+
+ Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
+
+commit 9acde129cc3f9c1b3bc11a821480dd446774d618
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Tue Apr 29 19:18:32 2008 +0200
+
+ TSEC: add config options for VSC8601 RGMII PHY
+
+ The Vitesse VSC8601 RGMII PHY has internal delay for both Rx
+ and Tx clock lines. They are configured using 2 bits in extended
+ register 0x17.
+ Therefore CFG_VSC8601_SKEW_TX and CFG_VSC8601_SKEW_RX have
+ been introduced with valid values 0-3 giving 0.0, 1.4,1.7 and 2.0ns delay.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+ --
+
+ drivers/net/tsec.c | 6 ++++++
+ drivers/net/tsec.h | 3 +++
+ 2 files changed, 9 insertions(+), 0 deletions(-)
+
+commit bd98ee60df43ee6dd6f5ebe32c67d03e90513ff8
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 3 23:07:15 2008 +0200
+
+ Revert "ColdFire: Get information from the correct GCC"
+
+ This reverts commit b7166e05a513c0806b63b9dfb6f1d77645cede2a
+ (replaced by commit c4e5f52a58d278eebb87f476e353972c5dacea40).
+
+commit c4e5f52a58d278eebb87f476e353972c5dacea40
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat May 3 22:25:00 2008 +0200
+
+ config.mk: use correct (cross) compiler
+
+ Some config.mk files reference $(CC) to test for specific tool chain
+ features, so make sure $(CC) gets set before including any such
+ config files.
+
+ This patch replaces commit b7166e05a5 ("ColdFire: Get information from
+ the correct GCC").
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 27c38689d0cfde0e444239345f97b5eecc9f4067
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu May 1 02:13:44 2008 +0200
+
+ pxa: fix previous definition on cpu init
+
+ start.S:183:1: warning: "ICMR" redefined
+ In file included from start.S:33:
+ include/asm/arch/pxa-regs.h:935:1: warning: this is the location of the previous definition
+ start.S:187:1: warning: "RCSR" redefined
+ ...
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6d12e697de794d700767f22f950e3026ccf4daf6
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu May 1 02:13:43 2008 +0200
+
+ pxa: fix pcmcia operation on 'i' may be undefined
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4d77f5102dfeaa36cd58d9a9f083bd2cc491526f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Apr 30 16:24:35 2008 -0500
+
+ MPC8610HPCD: Drop -O2 from the build flags
+
+ Make the flags use -Os like all other boards
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0072b78be2b41e5a0ca3ddc39335574dc2e855bd
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 30 15:50:39 2008 +0200
+
+ RTC: Fix month offset by one problem in M41T62 RTC driver
+
+ This patch fixes a problem with the month being read and written
+ incorrectly (offset by one). This only gets visible by also using
+ the Linux driver (rtc-m41t80).
+
+ Tested on AMCC Canyonlands.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 141ba1cad8e6598a2466e7e2976c6a12285df619
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat May 3 13:51:44 2008 +0900
+
+ [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
+
+ Current trick to pick up GNU assembler minor version uses a dot(.) as a
+ delimiter, and take the second field to obtain minor version number. But
+ as can be expected, this doesn't work with a version string which has
+ dots more than needs.
+
+ Here's an example:
+
+ $ mips-linux-gnu-as --version | grep 'GNU assembler'
+ GNU assembler (Sourcery G++ Lite 4.2-129) 2.18.50.20080215
+ $ mips-linux-gnu-as --version | grep 'GNU assembler' | cut -d. -f2
+ 2-129) 2
+ $
+
+ This patch restricts the version format to 2.XX.XX... This will work
+ in most cases.
+
+ $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+'
+ 2.18.50.20080215
+ $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+' | cut -d. -f2
+ 18
+ $
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit ea638951acead7f1086c908c0b9f086beab82a22
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Sat May 3 13:51:28 2008 +0900
+
+ [MIPS] cpu/mips/cache.S: Add dcache_enable
+
+ Recent bootelf command fixes (017e9b7925f74878d0e9475388cca9bda5ef9482,
+ "allow ports to override bootelf behavior") requires ports to have this
+ function.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d2c6fbec4397c936b18cd42482b6973cd6781bdf
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu May 1 21:30:16 2008 +0200
+
+ onenand: rename 16 bit memory copy into memcpy_16() to avoid conflicts
+
+ Onenand needs a version of memcpy() which performs 16 bit accesses
+ only; make sure the name does not conflict with the standard
+ function.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 12bc4e94251c369c529ffa505cf58b148c372f7f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Apr 30 22:38:17 2008 +0200
+
+ cmd_nand: fix warning: str2long ncompatible pointer type
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1b9ed2574a38c93cb03dad41885fc06be4bfc9dd
+Author: Timur Tabi <timur@freescale.com>
+Date: Fri Apr 4 11:16:11 2008 -0500
+
+ Fix calculation of I2C clock for some 86xx chips
+
+ Some 86xx chips use CCB as the base clock for the I2C, and others used CCB/2.
+ There is no pattern that can be used to determine which chips use which
+ frequency, so the only way to determine is to look up the actual SOC
+ designation and use the right value for that SOC.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit f32f7fe7bd3a5bda3a476520f00e1aca7c2103a9
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Apr 30 12:11:19 2008 -0500
+
+ ColdFire: Fix ethernet hang issue for mcf547x_8x
+
+ The ethernet hang is caused by receiving buffer in DRAM is not
+ yet ready due to access cycles require longer time in DRAM.
+ Relocate DMA buffer descriptors from DRAM to internal SRAM.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 886d90176fc257e0ab4d0db05d11d0749bbed3ca
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Apr 30 12:10:47 2008 -0500
+
+ ColdFire: Fix compilation issue caused by new changes in fsl_i2c.c
+
+ Signed-off-by: Luigi Comio Mantellini <luigi.mantellini@idf-hit.com>
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit b7166e05a513c0806b63b9dfb6f1d77645cede2a
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Wed Apr 30 12:10:23 2008 -0500
+
+ ColdFire: Get information from the correct GCC
+
+ Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 378e7ec95da4751ec8fe461baacab2bf7d2512a9
+Author: dirk.behme@googlemail.com <dirk.behme@googlemail.com>
+Date: Wed Apr 30 18:02:59 2008 +0200
+
+ Fix warning in env_nand.c if compiled for DaVinci Schmoogie
+
+ Fix warnings
+
+ nv_nand.c: In function 'saveenv':
+ env_nand.c:200: warning: passing argument 3 of 'nand_write' from incompatible pointer type
+ env_nand.c: In function 'env_relocate_spec':
+ env_nand.c:275: warning: passing argument 3 of 'nand_read' from incompatible pointer type
+
+ if compiled for davinci_schmoogie_config.
+
+ Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+ Ack by: Sergey Kubushyn <ksi@koi8.net>
+
+commit 33a4a70d48d622cc4950c60a84fec23b9421f23e
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Wed Apr 30 13:34:40 2008 +0200
+
+ Fix warnings while compiling net/net.c for MPC8610HPCD board
+
+ MPC8610HPCD board adds -O2 gcc option to PLATFORM_CPPFLAGS
+ causing overriding default -Os option. New gcc (ver. 4.2.2)
+ produces warnings while compiling net/net.c file with -O2
+ option. The patch is an attempt to fix this.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 58b575e575c25fdf8c88141e145db201f3092149
+Author: Sascha Laue <Sascha.Laue@gmx.biz>
+Date: Wed Apr 30 15:23:38 2008 +0200
+
+ lwmon5: fix offset error in sysmon0 POST
+
+ Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e7419b243a373de4ee042f7d4f45f66de787240d
+Author: Sascha Laue <Sascha.Laue@gmx.biz>
+Date: Wed Apr 30 15:16:35 2008 +0200
+
+ lwmon5: fix manual merge error in POST
+
+ Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
+
+commit 42ffcec3f9eba010a662d5b42981812b6bebfb9a
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Apr 30 17:46:26 2008 +0200
+
+ cmd_nand.c: fix another 'incompatible pointer type' warning.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit de109d909707e2dfe806be5efc3cdb103b47c8ad
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Apr 30 17:25:07 2008 +0200
+
+ Makefile: fix parallel builds
+
+ This problem shows up with parallel builds only; it results in
+ somewhat cryptic error messages like
+
+ $ JOBS=-j6 MAKEALL netstar
+ Configuring for netstar board...
+ arm-linux-ld: cannot find -lgeneric
+ make[1]: *** [eeprom.srec] Error 1
+
+ A few boards (like netstar and voiceblue) need some libraries for
+ building; however, the board Makefile does not contain any such
+ dependencies which may cause problems with parallel builds. Adding
+ such dependencies is difficult as we would also have to provide build
+ rules, which already exist in the respective library Makefiles.
+
+ To solve this, we make sure that all libraries get built before the
+ board code.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4f27098e5b0736989b13cd61d7bca94b3574cf5f
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 30 14:51:36 2008 +0200
+
+ ppc4xx: Adapt Canyonlands fixed DDR2 setup to new DIMM module
+
+ This patch changes the Canyonlands/Glacier fixed DDR2 controller setup
+ used for NAND booting to match the values needed for the new 512MB
+ DIMM modules shipped with the productions boards:
+
+ Crucial: CT6464AC667.8FB
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ea9202a659dc75996facf1475f1866a19a9d3129
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 30 10:49:43 2008 +0200
+
+ ppc4xx: Fix problem with DIMMs with 8 banks in 44x_spd_ddr2.c
+
+ This patch fixes a problem with DIMMs that have 8 banks. Now the
+ MCIF0_MBxCF register will be setup correctly for this setup too.
+
+ This was noticed with the 512MB DIMM on Canyonlands/Glacier.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 76617299358ebba260ecc02d33e8e75d8d13dd3b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Apr 29 23:41:06 2008 +0200
+
+ Prepare v1.3.3-rc2, again.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit b7fcc4c13993782342cf5cd20d237a6281648a0b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Apr 29 23:35:24 2008 +0200
+
+ Prepare v1.3.3-rc2
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f7b16a0a4d571dd33b2b5185a54f7ddc311f89d4
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Apr 29 23:32:20 2008 +0200
+
+ common/env_nand.c: fix one more incompatible pointer type issue
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit ea6f66894f952229eebfc4ad03cd21fe5c8b3f0f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Apr 29 21:33:08 2008 +0200
+
+ post/board/lwmon5/sysmon.c: fix manual merge error.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 70a0f81412b0b18a6fd0bea960451bc6c2cca49a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Apr 29 12:54:59 2008 -0500
+
+ 85xx: Add -mno-spe to e500/85xx builds
+
+ Newer gcc's might be configured to enable autovectorization by default.
+ If we happen to build with one of those compilers we will get SPE
+ instructions in random code.
+
+ -mno-spe disables the compiler for automatically generating SPE
+ instructions without our knowledge.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8ea08e5be69436abcc95d3da114de4a2ff8a6ab5
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Apr 29 10:18:34 2008 -0500
+
+ Update .gitignore for zlib.h
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 45239cf4152109caa925145ccd433529902df887
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Apr 29 10:27:08 2008 -0500
+
+ 85xx/86xx: Rename ext_refrec to timing_cfg_3 to match docs
+
+ All the 85xx and 86xx UM describe the register as timing_cfg_3
+ not as ext_refrec.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ef7d30b14394e4c4a153118f5845760cadada02a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Apr 29 10:28:34 2008 -0500
+
+ 85xx/86xx: Rename DDR init address and init extended address register
+
+ Rename init_addr and init_ext_addr to match the docs between
+ 85xx and 86xx. Both now use 'init_addr' and 'init_ext_addr'.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit cf6cc014270549684873a5972d2595052c468cb6
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Apr 28 02:24:04 2008 -0500
+
+ 85xx: Additional fixes and cleanup of MP code
+
+ * adjust __spin_table alignment to match ePAPR v0.94 spec
+ * loop over all cpus when determing who is up. This fixes an issue if
+ the "boot cpu" isn't core0. The "boot cpu" will already be in the
+ cpu_up_mask so there is no harm
+ * Added some protection in the code to ensure proper behavior. These
+ changes are explicitly needed but don't hurt:
+ - Added eieio to ensure the "hot word" of the table is written after
+ all other table updates have occurred.
+ - Added isync to ensure we don't prefetch loading of table entries
+ until we a released
+
+ These issues we raised by Dave Liu.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit b2d527a8b9fb50afccbaf79b5540952585cdc760
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Tue Apr 29 15:06:41 2008 +0200
+
+ lwmon5: minor clean-up to include/configs/lwmon5.h
+
+ LWMON5 DSPIC POST uses the watch-dog scratch register. So, make
+ the CFG_DSPIC_TEST_ADDR definition more readable.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit f4c4d21a885ccc222fd0acdf653b683249e85117
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 29 16:08:05 2008 +0200
+
+ ppc4xx: Fix CFG_MONITOR_LEN on Katmai failsave this time
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 138105efe1d2b1a40a3a97b4c1f85c2111bea2d8
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Tue Apr 29 13:32:45 2008 +0200
+
+ ppc flush_cache: add watch-dog triggering into the loops.
+
+ Some boards (e.g. lwmon5) need rather a frequent watch-dog
+ kicking. Since the time it takes for the flush_cache() function
+ to complete its job depends on the size of data being flushed, one
+ may encounter watch-dog resets on such boards when, for example,
+ download big files over ethernet.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit cab99d6f3281ab6784feccf98b9b425daa58418a
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 29 14:44:54 2008 +0200
+
+ ppc4xx: Fix compilation warning in denali_spd_ddr2.c
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4ec9d78fe5cd585d2868731fa108ca1e62730e70
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 29 14:12:07 2008 +0200
+
+ ppc4xx: Fix Katmai CFG_MONITOR_LEN
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 85ad184b3b2b0f8af9228477303c55dca1b52ed7
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 29 13:57:07 2008 +0200
+
+ ppc4xx: Complete remove bogus dflush()
+
+ Since the current dflush() implementation is know to have some problems
+ (as seem on lwmon5 ECC init) this patch removes it completely and replaces
+ it by using clean_dcache_range().
+
+ Tested on Katmai with ECC DIMM.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 135846d6ecaad255ad28d93ebbb78b3d5da68cdc
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 29 13:36:51 2008 +0200
+
+ ppc4xx: Change ECC initialization on lwmon5 to use clean_dcache_range()
+
+ As it seems the "old" ECC initialization routine by using dflush() didn't
+ write all lines in the dcache back to memory on lwmon5. This could lead
+ to ECC error upon Linux booting. This patch changes the program_ecc()
+ routine to now use clean_dcache_range() instead of dflush().
+ clean_dcache_range() uses dcbst which is exactly what we want in this
+ case.
+
+ Since dflush() is known is cause problems, this routine will be
+ removed completely and replaced by clean_dcache_range() with an
+ additional patch.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 18ec19e4aa1a045dfbf2c7c2e33963488e92d757
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Mon Apr 28 18:19:34 2008 +0200
+
+ POST: fix Makefiles for mpc8xx, lwmon, and netta POSTs.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit eea5a743a2193ef2a05b9bc6dc447ba241416f35
+Author: Markus Brunner <super.firetwister@googlemail.com>
+Date: Mon Apr 28 08:47:47 2008 +0200
+
+ ppc4xx: Fixup ebc clock in FDT for 405GP/EP
+
+ On ppc405EP and ppc405GP (at least) the ebc is directly attached to the plb
+ and not to the opb. This patch will try to fixup /plb/ebc if /plb/opb/ebc
+ doesn't exist.
+
+ Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
+
+commit 2ef7503a593c77a80c2a054011970227c4b62774
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Apr 24 07:57:17 2008 +0200
+
+ NE2000: Fix regresssion introduced by e710185aae90 on non AX88796
+
+ Move non-inlied functions into specific drivers file
+ Set get_prom as weak
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Vlad Lungu <vlad@comsys.ro>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 40cb90ee2b97db1f697e1b54f19a548ffc96d71b
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Thu Apr 3 17:04:19 2008 +0200
+
+ net: make ARP timeout configurable
+
+ Currently the timeout waiting for an ARP reply is hard set to 5 seconds.
+ On i.MX31ADS due to a hardware "strangeness" up to four first IP packets
+ to the boards get lost, which typically are ARP replies. By configuring
+ the timeout to a lower value we significantly improve the first network
+ transfer time on this board. The timeout is specified in milliseconds,
+ later internally it is converted to deciseconds, because it has to be
+ converted to hardware ticks, and CFG_HZ ranges from 900 to 27000000 on
+ different boards.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 13e0b8f7ca9d29267bf01d7a01e521a0517adce1
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Thu Apr 3 13:36:18 2008 +0200
+
+ minor cs8900 driver clean up
+
+ Remove a redundant register definition, clean up some coding style
+ violations.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 707fa917cca24c0f22776f48ac4a6fa5e5189b10
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Apr 28 22:01:04 2008 +0200
+
+ jffs2_1pass.c: fix incompatible pointer type warning
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6aee00f5e6a1cf29d8fe8fdc9b7252fbd31115d9
+Author: Sascha Laue <Sascha.Laue@gmx.biz>
+Date: Tue Apr 1 10:10:18 2008 +0200
+
+ lwmon5: update dsPIC POST spezification
+
+ The specification for the lwmon5 board dsPIC POST got changed.
+ Also add defines for the temperatures and voltages.
+
+ Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
+
+commit 3e4615ab7ff38781a5dd80d0f49b9af55b4fe0b7
+Author: Sascha Laue <Sascha.Laue@gmx.biz>
+Date: Tue Apr 1 15:13:03 2008 +0200
+
+ Fix watchdog POST for lwmon5
+
+ If the hardware watchdog detects a voltage error, the watchdog sets
+ GPIO62 to low. The watchdog POST has to detect this low level.
+
+ Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit dd5748bcd669f46aeb6686c1b341323843738ccc
+Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+Date: Mon Apr 28 14:37:14 2008 +0200
+
+ rtl8169: fix compiler warnings
+
+ Fix multiple compiler warnings related to argument type mismatch.
+
+ Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+
+commit 413bf586266f86c6bdbc6c6d140f67a15af4c4f1
+Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+Date: Mon Apr 28 14:36:06 2008 +0200
+
+ IDE: fix compiler warnings
+
+ The IDE driver can use 32-bit addresses in LBA mode, in which case it
+ spits multiple warnings during compilation. Fix them.
+
+ Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+
+commit db9084de28c46ac81c8f681722cb0d7411be4d7f
+Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+Date: Mon Apr 28 14:35:57 2008 +0200
+
+ LinkStation: fix compiler warning, add a maintainer
+
+ out_8 wants a pointer to an unsigned as the first argument. Add a
+ maintainer for Linkstation boards.
+
+ Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+
+commit c71abba3cb67b063f789f17abf6c7447727c0cd5
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Apr 28 14:55:12 2008 +0200
+
+ cmd_nand.c: fix "differ in signedness" problem
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f2c288a35341ad02ac03b1563d786763c9c8f159
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Apr 28 12:48:47 2008 +0200
+
+ pcnet.c: fix a merge issue
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4ca79f477ebd25a6872e6196d80e2f5eff441376
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Apr 28 12:08:18 2008 +0200
+
+ NAND: fix some strict-aliasing compiler warnings
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5cd0130ecc79d6dcde1b1ac253abc457ca8c3115
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Apr 28 11:37:14 2008 +0200
+
+ ppc4xx: Fix compile warning of hcu4 board
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5379cd15dd6c74ac51499bce3455bf6e0cdbe9f1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Apr 28 11:31:23 2008 +0200
+
+ MPC8323ERDB: fix implicit declaration of function 'mac_read_from_eeprom'
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 7602ed50a2f0ef3dc8d7da93f116de50288f5b59
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Mon Apr 28 00:25:32 2008 +0200
+
+ mx31ads: fix loadaddr environment variable define
+
+ Arithmetic expressions do not get evaluated under stringification. Remove
+ default network configuration, add DHCP command support. Thanks to Felix
+ Radensky for reporting.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 144eec777ac07bcb12bd38245a5a289f694a7f98
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Apr 28 10:55:24 2008 +0200
+
+ katmai: fix section overlap problem
+
+ Since we didn't want to remove features from the configuration, we
+ decided to increase the U-Boot image size (add one flash sector).
+
+ Also changed the default environment definition to make it
+ independent of such changes.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 941d696d25624e3cc65ebf924199541acf52d74e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Apr 28 10:55:24 2008 +0200
+
+ katmai: fix section overlap problem
+
+ Since we didn't want to remove features from the configuration, we
+ decided to increase the U-Boot image size (add one flash sector).
+
+ Also changed the default environment definition to make it
+ independent of such changes.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 03c6cd39f9184143fd8c537872b3d4b2e03f1466
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Sat Apr 26 11:44:44 2008 -0500
+
+ post: Fix building with O=
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit fd7531c1e9d56b9e5e06d2c0e02b798dab72f70c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Apr 26 01:55:00 2008 +0200
+
+ Prepare v1.3.3-rc1
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 19cf2ec90d8ce52da60c1693693c4048cb810967
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Apr 26 01:25:39 2008 +0200
+
+ post/Makefile: make sure to use the correct flags
+
+ ARFLAGS was not set, which caused "ppc_8xx-ar: creating libgenpost.a"
+ messages to be printed.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 7ed4011733e7dca8f64d21291e4294662f7dc3e2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Apr 26 00:34:42 2008 +0200
+
+ Coding Style cleanup, update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f9204e15173834ff8d123e36279ce49c3c6c74fc
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Sun Apr 20 10:38:12 2008 +0200
+
+ i.MX31: Enable SPI and MC13783/RTC support for the Litekit board
+
+ This patch enables SPI and MC13783/RTC support for the Litekit board.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit f97abbfb47d9e407354e157cae3f6369e460cd37
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date: Fri Apr 25 01:08:32 2008 -0500
+
+ MPC8544DS: decode pcie3 end-point configuration correctly.
+
+ Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 292188e15523c165c4269403fdcd33c26d89176e
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date: Fri Apr 25 00:55:09 2008 -0500
+
+ MPC8544DS: Removes the unknown flash message information
+
+ This patch removes the unknown flash message information:
+ '## Unknown FLASH on Bank 1 - Size = 0xdeadbeef = -286261248 MB'
+ This unknown flash message is caused by PromJet.
+ Some of the board user is unhappy with this information.
+
+ Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit b2115757403beef0ac6bc2c6c3b24f31256a75d2
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Thu Apr 24 14:07:38 2008 -0500
+
+ mpc83xx: bump loadaddr over fdtaddr to 0x500000
+
+ this seems as a good compromise between human memory, typing,
+ and last but not least, to accommodate for current and future kernel bloat.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+ Acked-by: Dave Liu <daveliu@freescale.com>
+
+commit be5a7190265a34d968578ff266549c60f6f57654
+Author: Dave Liu <r63238@freescale.com>
+Date: Tue Apr 15 13:12:23 2008 +0800
+
+ mpc83xx: clean up the readme for 83xx boards
+
+ 1. correct the typo
+ 2. correct the memory map for 837xerdb board
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit bcae52a6819ee9dad5d0d96cd7daeb20108d45ff
+Author: Dave Liu <r63238@freescale.com>
+Date: Tue Apr 15 13:11:11 2008 +0800
+
+ mpc83xx: remove the unused CPM's stuff
+
+ The MPC83xx family never have CPM block, so remove it from 83xx.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit c63ad6325a8ac0097a54b418a3288926b0484b18
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Apr 18 16:29:40 2008 +0200
+
+ cfi-flash: Add CFG_FLASH_AUTOPROTECT_LIST
+
+ This patch adds a configurable flash auto protection list that can be used
+ to make U-Boot protect flash regions in flash_init().
+
+ The idea has been discussed on the u-boot mailing list starting
+ on Nov 18th, 2007.
+
+ Even this patch brings a new feature it is used as a bugfix for 4xx
+ platforms where flash_init() does not completely protect the
+ monitor's flash range in all situations.
+
+ U-Boot protects the flash range from CFG_MONITOR_BASE to
+ (CFG_MONITOR_BASE + monitor_flash_len - 1) by default. This does not
+ include the reset vector at 0xfffffffc.
+
+ Example:
+ #define CFG_FLASH_AUTOPROTECT_LIST {{0xfff80000, 0x80000}}
+
+ This config option will auto protect the last 512k of flash that
+ contains the bootloader on board like APC405 and PMC405.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit d0d91ae3acb4f29d1a2a3a766747478ed54e2848
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Apr 25 13:59:03 2008 +0200
+
+ ppc4xx: Remove double defines in lwmon5.h
+
+ introduced with latest lwmon5/POST merge
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7590378fb9c686709492ceb142825cd058255956
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Fri Apr 25 13:54:02 2008 +0200
+
+ Use watchdog-aware functions when calculating hashes of images - take two
+
+ Some files didn't get updated properly with the "Use watchdog-aware
+ functions when calculating hashes of images" commit, this commit
+ fixes this.
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8e048c438e20ec89b49da5f085f8f756eba6e587
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Apr 25 12:01:39 2008 +0200
+
+ ppc4xx: Add bootcount limit handling for APC405 boards
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 1de6b28be5d107ae90ad7a8a43653c49966e8afe
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Fri Apr 25 12:10:09 2008 +0200
+
+ Use watchdog-aware functions when calculating hashes of images
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit d00ce09040d3100e2c7998ef56db62c2d20d9ee3
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Apr 25 12:44:08 2008 +0200
+
+ USB: fix more GCC 4.2.x aliasing warnings
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Acked-by: Markus Klotzbuecher <mk@denx.de>
+
+commit aff4f86448f6586930f0a3be7fc4b0ddcf450980
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Apr 25 12:41:53 2008 +0200
+
+ lib_generic/crc32.c: add missing #include <watchdog.h>
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 03ccdbcd5602610cea4bd0db7e48e1ef881a51ef
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Apr 25 11:52:21 2008 +0200
+
+ lib_generic/crc32.c: fix compile problem
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 24bfedbd0be4dcaa94861407820d6a70fea7e03b
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 22 12:20:32 2008 +0200
+
+ ppc4xx: Pass PCIe root-complex/endpoint configuration to Linux via the fdt
+
+ The PCIe root-complex/endpoint setup as configured via the "pcie_mode"
+ environment variable will now get passed to the Linux kernel by setting
+ the device_type property of the PCIe device tree node. For normal root-
+ complex configuration it will keep its defaults value of "pci" and for
+ endpoint configuration it will get changed to "pci-endpoint".
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit eb0615bf600d2caf5aa2958f47f5ba364c52d5e7
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Thu Apr 24 10:30:53 2008 +0200
+
+ lwmon5: watchdog POST fix
+
+ Use the GPT0_MASKx registers as the temporary storage for watch-dog
+ timer POST test instead of GPT0_COMPx. The latter
+ (GPT0_COMP1..GPT0_COMP5) are used for the log-buffer header.
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 78e488298824bc150b5f3ebf7958cd71fa2af1b9
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Mon Apr 21 18:10:14 2008 -0500
+
+ lib_ppc: Revert "Make MPC83xx one step closer to full relocation."
+
+ This reverts commit 70431e8a7393b6b793f77957f95b999fc9a269b8 which has
+ proven problematic getting right from the start at least on 83xx and
+ 4xx.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit a99715b8ebfc500f3f40e01b36b64d473938443d
+Author: Detlev Zundel <dzu@denx.de>
+Date: Fri Apr 18 14:50:01 2008 +0200
+
+ Realining some header definitions.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 4acbc6c7f993cae409c424615415a3e76820f13d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Apr 24 07:57:16 2008 +0200
+
+ NE2000: coding style cleanup
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit b4aff1ffaf7120032c653357c007faa14f74d29d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Apr 23 00:11:47 2008 +0900
+
+ qemu-mips.h: Add CFI support
+
+ CONFIG_ENV_OVERWRITE is also added.
+
+ This patch is originally created by Jean-Christophe PLAGNIOL-VILLARD.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 4a1f11b45a82908e5b0df602d703082413a6b7ed
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Tue Apr 22 22:47:27 2008 +0900
+
+ doc/README.mips: Add MIPS notes
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 215b01bba8bc662d35f72b084700b192d367dfb4
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue Apr 22 12:27:56 2008 +0200
+
+ Add support for calculating hashes with watchdog triggering
+
+ Implement watchodg-aware variants of hash calculation functions:
+ - crc32_wd()
+ - md5_wd()
+ - sha1_csum_wd()
+ The above functions calculate the hash of the input buffer in chunks,
+ triggering the watchdog after processing each chunk. The chunk size
+ is given as a function call parameter.
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 8875e3abab986df930167ce5c1ac4f95dcacc81c
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Wed Apr 23 11:02:12 2008 +0900
+
+ qemu-mips: Cleanup whitespace, indentation, etc.
+
+ No functional change.
+
+ This patch was originally submitted by Jean-Christophe PLAGNIOL-VILLARD.
+ Then I re-created from scratch, and changed more lines than the original.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 386563197e3a50b0e97ad9aae87f57d9aab909ab
+Author: Vlad Lungu <vlad@comsys.ro>
+Date: Wed Oct 10 23:02:09 2007 +0300
+
+ Fixed pcnet io_base
+
+ Bus and phys address are not always the same
+
+ Signed-off-by: Vlad Lungu <vlad@comsys.ro>
+
+commit 11ea26fd1cb63c91403fe04a6eea975cd418603f
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Apr 24 23:44:26 2008 +0200
+
+ drivers/net/pcnet.c: Coding Style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 899ef7b84578b7cafadfd78488c2fd2aac93f636
+Author: Vlad Lungu <vlad@comsys.ro>
+Date: Wed Oct 10 23:04:23 2007 +0300
+
+ Added Am79C970A chip id to pcnet
+
+ Signed-off-by: Vlad Lungu <vlad@comsys.ro>
+
+commit 17c9de6bb33f676eb776dcbfc46fc1b14c3871a5
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Sun Apr 20 10:35:03 2008 +0200
+
+ i.MX31: Fix architecture numbers for ADS and Litekit boards
+
+ Correct the Linux architecture number for i.MX31 Litekit and ADS boards.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit e7ae84d6c7288790e88639f57cb60daf89c11369
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Sun Apr 20 10:36:36 2008 +0200
+
+ i.MX31: Use symbolic names for Litekit membases.
+
+ Use symbolic names instead of hard coded addresses for Litekit membases.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit 2ef1d9b6030d02f576b1bcd9fec948e602522012
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Apr 19 17:59:20 2008 +0200
+
+ Fix show_boot_progress prototype
+
+ in commit fad634071 "make show_boot_progress () weak."
+ show_boot_progress is supposed to be declared as weak but declared as
+ inline instead.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit edbed247a14d70b94958010f736621212285de91
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Fri Apr 18 12:39:23 2008 +0200
+
+ Memory footprint optimizations
+
+ As suggested by Wolfgang Denk:
+ - image printing functions:
+ - remove wrappers
+ - remove indentation prefix from functions' signatures
+ - merge getenv_verify and getenv_autostart into one parametrized function
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 0a0b606faaec4afb3f750b09aa4df1e40a39dcb8
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Tue Apr 15 13:33:11 2008 +0200
+
+ MX31ADS environment variable update, spi and rtc support
+
+ Update MX31ADS default environment to better match the flash layout and
+ the memory map, support SPI and RTC.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 022f12163595b9a55380c6d77c3119b93d6a9a4b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Apr 21 09:28:36 2008 -0500
+
+ 85xx: Round up frequency calculations to get reasonable output
+
+ eg. because of rounding error we can get 799Mhz instead of 800Mhz.
+
+ Introduced DIV_ROUND_UP and roundup taken from linux kernel.
+
+ Signed-off-by: Dejan Minic <minic@freescale.com>
+ Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit 876b8f978982216ab4a22dcd9efddfcd9b0e04e6
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Apr 23 16:58:04 2008 -0500
+
+ fsl_pci: Only modify registers if we have them
+
+ pme_msg_det exists only on PCIe controllers only set it if we are a "bridge".
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 83fe32334337def160b302aa9d152d808bfcc68e
+Author: Markus Klotzbücher <mk@denx.de>
+Date: Wed Apr 23 10:57:33 2008 +0200
+
+ USB: remove a cpu bug workaround for an unsupported architecture.
+
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit f957576cb53e6cfab412709cfc8db1afd39d21c3
+Author: Markus Klotzbücher <mk@denx.de>
+Date: Wed Apr 23 10:53:23 2008 +0200
+
+ USB: fix those pesky aliasing warnings issued by gcc-4.2
+
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 89cdab788f3716b335fefb60b836ebcf975aceab
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Mar 31 11:02:01 2008 -0400
+
+ crc32: use uint32_t rather than unsigned long
+
+ The envcrc.c does sizeof(unsigned long) when calculating the crc, but
+ this is done with the build toolchain instead of the target tool
+ chain, so if the build is a 64bit system but the target is 32bits,
+ the size will obviously be wrong. This converts all unsigned long
+ stuff related to crc32 to uint32_t types. Compile tested only: output
+ of ./tools/envcrc when run on a 32bit build system matches that of a
+ 64bit build system.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 80c40b765b3642ddb9f3392b7898715aab44a29c
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Wed Mar 26 09:53:29 2008 +0100
+
+ ARM: Davinci: Fix DM644x timer overflow handling and cleanup
+
+ Fix ARM based DaVinci DM644x timer overflow handling and cleanup timer code.
+
+ Changes:
+
+ - Remove *_masked() functions as noted by Wolfgang
+
+ - Adapt register naming to recent TI spec (sprue26, March 2007)
+
+ - Fix reset_timer() handling
+
+ - As reported by Pieter [1] the overflow fix introduced a delay of factor 16 (e.g 2 seconds became 32). While the overflow fix is basically okay, it missed to divide udelay by 16, too. Fix this.
+
+ [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179
+
+ - Remove software division of timer count value (DIV(x) macro) and do it in hardware (TIM_CLK_DIV).
+
+ Many thanks to Troy Kisky <troy.kisky@boundarydevices.com> and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for the hints & testing!
+
+ Patch is compile tested with davinci_dvevm & sonata & schmoogie configuration and tested by Pieter on DaVinci EVM hardware.
+
+ Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+ Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl>
+
+commit a6e6fc610e39dec41b79680413d4ed38145bd3c8
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Wed Apr 9 16:09:41 2008 +0200
+
+ Added watchdog triggering calls in the "mtest" test function.
+
+ Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit d32a874b9b4c1e949ee38be7790f6bf6d6143451
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Sun Apr 6 19:19:14 2008 +0200
+
+ lwmon5 watchdog: limit trigger rate
+
+ Limit the rate of h/w watch-dog triggering on the LWMON5 board by
+ the CONFIG_WD_MAX_RATE value.
+
+ Note that an earlier version of this patch which used microseconds
+ instead of ticks dis not work. The problem was that we used
+ usec2ticks() to convert microseconds into ticks. usec2ticks() uses
+ get_tbclk(), which in turn calls get_sys_info(). It turns out that
+ this function does a lot of prolonged operations (like divisions)
+ which take too much time so we do not trigger the watchdog in time,
+ and it resets the system.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 2d2b994a30bb100774dc747ae9865b7f95285a88
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Mon Mar 31 10:51:37 2008 +0200
+
+ POST: move CONFIG_POST to Makefiles
+
+ Introduce the new logical option CONFIG_HAS_POST which is set when the
+ platform has CONFIG_POST set. Use CONFIG_HAS_POST in the post/ Makefiles
+ to determine should the POST libs be compiled for the selected target
+ platform, or not.
+
+ To avoid breaking u-boot linking process, the empty post/libpost.a file is
+ created for platforms which do not have POSTs.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0a51e9248e2d27e0a02ef1e740c576ce90a39ee1
+Author: Yuri Tikhonov <yur@emcraft.com>
+Date: Mon Mar 31 10:49:34 2008 +0200
+
+ POST: preparations for moving CONFIG_POST to Makefiles
+
+ Remove CONFIG_POST ifdefs from the post/ source files.
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5d40d4430d9ebc8434c6f0798594836e1efa7a1e
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 22 14:14:20 2008 +0200
+
+ ppc4xx: Fix Canyonlands and Glacier default environment for fdt usage
+
+ This patch fixes the Canyonlands and Glacier default environment to better
+ fit to the arch/powerpc device-tree kernels. The variables dealing with
+ arch/ppc booting are removed, since these boards are supported only in
+ arch/powerpc. Glacier uses the same config file as Canyonlands.
+
+ Also, the Glacier now uses non-FPU rootpath, since 460GT has no FPU.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b789cb4a4c0c1deff82053539cfe29a9c6e23f8b
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 22 14:06:42 2008 +0200
+
+ ppc4xx: Small coding style cleanup for the latest esd patches
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 79941d63bc03aed8c48d7602f18217cc200ee931
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Apr 21 18:01:07 2008 +0200
+
+ ppc4xx: Update CPU strapping for PMC440 boards
+
+ This patch removes the temporary 'test' strapping option
+ of the sbe command. The '667' strapping option now uses
+ a PLB/PCI divider of 3.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit f00cf3193a6635355b121e90debb2f54e777e7da
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Apr 21 14:42:21 2008 +0200
+
+ ppc4xx: Remove unused APC405 strataflash driver
+
+ The APC405 board support has been migrated to use the common
+ CFI flash driver.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 1c686676a86473bbd92151f0544e109413f6ed06
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Apr 21 14:42:17 2008 +0200
+
+ ppc4xx: Update APC405 configuration
+
+ - enable esd's auto_update mechanism
+ - support alternative flash layout on rev. 1.8 boards
+ - update default environment
+ - use common CFI flash driver
+ - coding style cleanup
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 0b9872515a521bf7866dc24b85ddce708e60d702
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Apr 21 14:42:11 2008 +0200
+
+ ppc4xx: Update APC405 board support
+
+ - enable esd's auto_update mechanism
+ - fix LCD support on latest hardware revision (uses other LCD controller)
+ - support alternative flash layout on rev. 1.8 boards
+ - coding style cleanup
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 83975d02e225e231960784972e7820a8b303756b
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Apr 21 14:42:06 2008 +0200
+
+ ppc4xx: update esd's common auto_update code for 405 boards
+
+ - Coding style cleanup (long lines)
+ - improve handling of protected flash regions
+ - remove dead code
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit b9233fe5d59cb25d975071616bd1035d6f4c2285
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Apr 21 14:41:59 2008 +0200
+
+ ppc4xx: Update esd's common LCD code for 405 boards
+
+ - Coding style cleanup (long lines)
+ - Add s1d13505 support
+ - Make some functions return a result code instead of void
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit dea68189424c3f1242427a8146a3861bf093173c
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Apr 21 11:36:55 2008 +0200
+
+ ppc4xx: Update FPGA image for APC405 boards
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 2a05b152924acfcec3b037693329e517e6d3578f
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Apr 21 11:36:08 2008 +0200
+
+ ppc4xx: Update bootlogo for APC405 boards
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 8deafdc6ad368368cf03b58cab4bd39f45d64b5c
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Apr 18 16:41:31 2008 +0200
+
+ ppc4xx: Add dcache_enable() for 440
+
+ dcache_enable() was missing for 440 and the patch
+ 017e9b7925f74878d0e9475388cca9bda5ef9482 ["allow ports to override bootelf
+ "] behavior uses this function.
+
+ Note: Currently the cache handling functions like
+ d/icache_disable/enable() are NOP's on 440. This may be changed in the
+ future.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a49e0d177a0749614b316ec847fb623f09c82c07
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Mon Apr 21 11:19:04 2008 +0200
+
+ video: Add missing free for logo memory
+
+ This patch adds two missing free()s.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 84c01d3a05ae3aca5f7c0c13a31ca72ba1199a42
+Author: Troy Kisky <troy.kisky@boundarydevices.com>
+Date: Mon Sep 24 16:41:43 2007 -0700
+
+ PATCH - Fix oob data copied into supplied buffer
+
+ This patch correctly sets the oobavail variable
+ and fixes a bug where the oob data was not valid when
+ there where multiple groups in oobfree.
+
+ First segment fixes a typo
+ Second segment fixes a bug where oob data may be copied incorrectly.
+ Third segment adds an error message when exiting due to write protect.
+ Forth segment fixes a bug where oobavail may be set incorrectly.
+
+ Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
+
+commit e1d09680f64b452adde89ed9fe28a77c56bedc9a
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Apr 18 17:24:32 2008 +0200
+
+ ppc4xx: Fix sys_get_info() for 405GP(r)
+
+ This patch assigns the correct EBC clock for 405GP(r) CPUs
+ to PPC4xx_SYS_INFO structure. Without this patch U-Boot
+ uses an uninitialized EBC clock in its startup message.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit dc7746d86d2a3dfe01ab9a70cb427f92adc303c7
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Apr 20 15:39:38 2008 -0700
+
+ Makefile: remove nand_spl/System.map when cleaning up.
+
+commit d9a42c0ace4d4f9cb061d62a7265d1780f90447b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Apr 20 15:35:52 2008 -0700
+
+ MAKEALL: sort entries / lists.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0878af169b181868a105b5c33f3a6423e2c9fd60
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Apr 18 11:29:01 2008 -0500
+
+ 85xx: Fix size of cpu-release-addr property
+
+ The cpu-release-addr is defined as always being a 64-bit quanity regardless
+ if we are running on a 32-bit or 64-bit machine.
+
+commit 88353a985109562a639b2f8a0c90d77011bfe374
+Author: Timur Tabi <timur@freescale.com>
+Date: Fri Apr 4 11:15:58 2008 -0500
+
+ Fix calculation of I2C clock for some 85xx chips
+
+ Some 85xx chips use CCB as the base clock for the I2C. Some use CCB/2, and
+ some use CCB/3. There is no pattern that can be used to determine which
+ chips use which frequency, so the only way to determine is to look up the
+ actual SOC designation and use the right value for that SOC.
+
+ Update immap_85xx.h to include the GUTS PORDEVSR2 register.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+
+commit 1e01477aeaf409ddb97e2633aab9cf8c9c60612e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Apr 18 11:44:27 2008 -0700
+
+ Fix build breakage casued by commit c0559be371b2
+
+ Change env_get_char from a global function ptr to a function.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 268a804d7e2fa07b64211fd2f9a9615db4539f23
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Apr 18 10:53:41 2008 -0700
+
+ Coding Style cleanup, update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 92bad20ad74b70adf3839df9a0a47cce000ac3d7
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Apr 8 14:00:57 2008 -0400
+
+ Add support for u-boot in svn and localversion-* files
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d23ff6827decf121461fbc5622612fd7effe207e
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Thu Apr 3 17:04:22 2008 +0200
+
+ MX31ADS network and flash updates
+
+ This patch allows U-Boot to use buffered writes to the Spansion NOR
+ flash installed on this board, and eliminates long delays in network
+ transfers after the board startup.
+
+ Also modify flash layout to embed main and redundant environment
+ blocks in the U-Boot image.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit b5dc9b304d289831f291843ff88a45cbdf1a6290
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Mon Apr 14 10:53:12 2008 +0200
+
+ Support for the MX31ADS evaluation board from Freescale
+
+ This patch adds support for the MX31ADS evaluation board from Freescale,
+ initialization code is copied from RedBoot sources, also provided by
+ Freescale.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 499e7831e1baaac6bfb959213f1950c216fbc5ba
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 8 10:33:29 2008 +0200
+
+ ppc4xx: Change Canyonlands to support booting from 2k page NAND devices
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5e182dce04d68cc94407a1b1fa09307f2bb96719
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 8 10:33:28 2008 +0200
+
+ ppc4xx: Adjust Canyonlands fixed DDR2 setup (NAND booting) to 512MB SODIMM
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit fe7c0db6b2a9004f96c2a2d4fff2849e19c2d825
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 8 10:33:27 2008 +0200
+
+ ppc4xx: Add Glacier NAND booting target
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 46f373838e384a4c23d13581b1dfa5acb66b5810
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 8 10:31:00 2008 +0200
+
+ nand_spl: Update nand_spl to support 2k page size NAND devices
+
+ This patch adds support for booting from 2k page sized NAND device
+ (e.g. Micron 29F2G08AAC).
+
+ Tested on AMCC Canyonlands.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5e3dca577b7c1bf58bd2b48449b18b7e7dcd8e04
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Thu Apr 17 18:18:00 2008 +0200
+
+ Fix crash on sequoia in ppc_4xx_eth_init
+
+ Currently U-Boot crashes in ppc_4xx_eth_init on sequoia
+ with cache enabled (TLB Parity exeption). This patch
+ fixes the problem.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit accf7355767dc7f6b85d88bb1c75c9d95e84ba5b
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Thu Apr 17 18:15:27 2008 +0200
+
+ ppc4xx: Fix crash on sequoia with cache enabled
+
+ Currently U-Boot crashes on sequoia board in CPU POST if
+ cache is enabled (CONFIG_4xx_DCACHE defined). The cache
+ won't be disabled by change_tlb before CPU POST because
+ there is an insufficient adress range check since
+ CFG_MEM_TOP_HIDE was introduced. This patch tries to fix
+ this problem.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 43c509254fab375c49936498da944658117ed07c
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date: Thu Apr 17 23:35:13 2008 +0900
+
+ Use jr as register jump instruction
+
+ Current assembler codes are inconsistent in the way of register jump
+ instruction usage; some use jr, some use j. Of course GNU as allows both
+ usages, but as can be expected from `Jump Register' the mnemonic `jr' is
+ more intuitive than `j'. For example, Linux doesn't have `j <reg>' usage
+ at all.
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 7ce63709828d37b08866e537339a169bd0db2bd3
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Tue Apr 15 14:15:30 2008 +0200
+
+ RTC driver for MC13783
+
+ MC13783 is a multifunction IS with an SPI interface to the host. This
+ driver handles the RTC controller in this chip.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 38254f45b0b412332726c90d3184ad47479fcffb
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Tue Apr 15 14:14:25 2008 +0200
+
+ New i.MX31 SPI driver
+
+ This is an SPI driver for i.MX and MXC based SoCs from Freescale. So far
+ only implemented and tested on i.MX31, can with a modified register layout
+ and definitions be used for i.MX27, I think, MXC CPUs have similar SPI
+ controllers too.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 7064122c2eef92f02a03ef37a1a1c07e70cd4e38
+Author: Magnus Lilja <lilja.magnus@gmail.com>
+Date: Tue Apr 15 19:09:10 2008 +0200
+
+ Fix name of i.MX31 boards in config file header
+
+ Correct the name of the i.MX31 Litekit and phyCORE boards in config files.
+
+ Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
+
+commit a49864593e083a5d0779fb9ca98e5a0f2053183d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Apr 13 19:42:19 2008 -0400
+
+ allow ports to override go behavior
+
+ Split the arch-specific logic out of the common go code and into a dedicated
+ weak function called do_go_exec() that lives in cpu directories. This will
+ need review from i386/nios people to make sure I didn't break them.
+
+commit 017e9b7925f74878d0e9475388cca9bda5ef9482
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Apr 13 19:42:18 2008 -0400
+
+ allow ports to override bootelf behavior
+
+ Change the bootelf setup function into a dedicated weak function called
+ do_bootelf_exec. This way ports can control the behavior however they
+ like before/after calling the ELF entry point.
+
+commit a4b46ed6b3502335c3f3a5d672abe0bcb44f20b7
+Author: Ulf Samuelsson <ulf@atmel.com>
+Date: Sat Apr 12 20:56:03 2008 +0200
+
+ Reorder ARM boards in Makefile
+
+ Rearrange ARM boards in Makefile so that ARM926EJ-S boards
+ are no longer under ARM92xT header.
+
+ Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
+ Ack-By Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c3a60cb3bd67e120fc99b6ba88d9295c3c07f688
+Author: Ulf Samuelsson <ulf@atmel.com>
+Date: Sat Apr 12 20:29:44 2008 +0200
+
+ Clean up dataflash partitioning
+
+ This patch removes the board dependent parts from
+ "drivers/mtd/dataflash.c".
+ Each board relying on this, will have the appropriate
+ code in a new file, "partition.c" in the board directory.
+ board Makefiles updated to use the file.
+
+ The dataflash partitions are aligned on sector/page boundaries.
+
+ The CONFIG_NEW_DF_PARTITION was used to create named partitions
+ This is now the default operation, and the CONFIG variable is removed.
+
+ Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
+
+commit 51ecde946fec511a16346e498204ca10ad71080d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Apr 12 14:08:45 2008 +0200
+
+ gitignore: udpate stgit generated and .patch file
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 66e39818e95f51ee1c1dd2094407a8929543fa6d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Apr 18 00:15:36 2008 -0700
+
+ Get rid of redundant copy of renamed header file.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c3aafd8cf814e33a77de81c2f22b8c772216a3cc
+Author: Vlad Lungu <vlad@comsys.ro>
+Date: Fri Apr 11 21:20:14 2008 +0300
+
+ Fix dependency generation for older gcc versions
+
+ With gcc 3.3.3 at least, compilation fails with
+
+ Generating include/autoconf.mk
+ gcc: compilation of header file requested
+ make: *** [include/autoconf.mk] Error 1
+
+ since commit 16fe77752eee099b9fb61ed73460e51cc94b37ba.
+
+ Signed-off-by: Vlad Lungu <vlad@comsys.ro>
+
+commit cb1c4896905ab22fcd982e6a8a539f0031942e71
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Fri Apr 11 11:07:49 2008 +0200
+
+ Restore the ability to continue booting after legacy image overwrite
+
+ Before new uImage code was merged, bootm code allowed for the kernel image to
+ get overwritten during decompresion. new uImage introduced a check for image
+ overwrites and refused to boot the image that got overwritten. This patch
+ restores the old behavior. It also adds a warning when the image overwriten is
+ a multi-image file, because in such case accessing componentes other than the
+ first one will fail.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit de2b3216e6b4f3b2fe93759c05b17504f9dfe036
+Author: Marian Balakowicz <m8@semihalf.com>
+Date: Fri Apr 11 11:07:43 2008 +0200
+
+ ppc: Fix ftd_blob variable init when processing raw blob
+
+ Set fdt_blob variable before its value is printed out.
+
+ Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 3d36be030043cd841a2551d00a395135e363a64b
+Author: Jason Wessel <jason.wessel@windriver.com>
+Date: Thu Apr 10 14:30:16 2008 -0500
+
+ Remove all the search paths from the .lds files.
+
+ The cross compiler is responsible for providing the correct libraries
+ and the logic to find the linking libraries.
+
+ Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
+
+commit 7d721e34ae6be7d7db63e8d060a246278bb7ae58
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Mon Apr 14 15:44:16 2008 +0200
+
+ Boot-related documentation update
+
+ - document 'bootm_low' and 'bootm_size' environment variables
+ - update inaccurate CFG_BOOTMAPSZ entry
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit a6f0bd9f2b1971e2a61ac0fd1fc2c96cb7a4b67a
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Wed Apr 9 17:34:08 2008 +0200
+
+ Fix regression introduced by a typo in "Tidied other cpu/arm920t/start.S code"
+
+ Restore logic reverted by commit
+
+ commit 80767a6cead9990d9e77e62be947843c2c72f469
+ Author: Peter Pearse <peter.pearse@arm.com>
+ Date: Wed Sep 5 16:04:41 2007 +0100
+
+ Changed API name to coloured_led.h
+ Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
+ Tidied other cpu/arm920t/start.S code
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit e25cb8d3f4fcc265a9cdf8e9d577b59bdb64bbaf
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Apr 8 10:24:24 2008 -0400
+
+ Remove conflicting NAND ID
+
+ There are two NAND entries with ID 0xDC and this obviously causes problems.
+ In the kernel, they punted the first entry, so we should do the same.
+
+ See this upstream e-mail for more info:
+ http://lists.infradead.org/pipermail/linux-mtd/2007-July/018795.html
+
+ Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 188e94c370621708d13547d58dbc6ed3c5602aa8
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Tue Apr 8 16:20:35 2008 +0900
+
+ cpu/mips/cpu.c: Fix flush_cache bug
+
+ Cache operations have to take line address (addr), not start_addr.
+ I noticed this bug when debugging ping failure.
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit 8f2a68a07c058fca1d413e54f71c2e7e78a74ed4
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Thu Apr 3 14:29:01 2008 +0200
+
+ TQM5200: fix default IDE reset level
+
+ Before the first call of ide_reset(), the level of the IDE reset
+ signal on the TQM5200 is low (reset asserted). This patch sets the
+ default value to high (reset not asserted).
+
+ Currently this patch fixes no real problem, but it is cleaner to
+ assert the reset signal only on demand, and not permanently.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit c61e033d6e8abb7b4060ee36060961e1399f6079
+Author: Detlev Zundel <dzu@denx.de>
+Date: Thu Apr 3 14:18:48 2008 +0200
+
+ mgcoge, mgsuv: realign CONFIG_EXTRA_ENV_SETTING
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit f308572e19eb7fe63aa3d41f214cde4c23c9800f
+Author: Detlev Zundel <dzu@denx.de>
+Date: Thu Apr 3 14:18:47 2008 +0200
+
+ mgcoge, mgsuv: rename 'addcon' to 'addcons'
+
+ The latter name with 13 users is already established, so we will use
+ that.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit e175eacc87c3a9e4dad0799fee0e95732520afc7
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Thu Apr 3 13:37:56 2008 +0200
+
+ IDE: fix bug in reset sequence
+
+ According to the ata (ata5) specification the RESET- signal
+ shall be asserted for at least 25 us. Without this patch,
+ the RESET- signal is asserted on some boards for only < 1 us
+ (e. g. on the TQM5200). This patch adds a general delay of
+ 25 us to the RESET- signal.
+
+ Without this patch a Platinum 4 GiB CF card is not recognised
+ properly on boards with a TQM5200 (STK52xx, TB5200).
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 813bea96a960916c72b4a3a7df840151529c26ce
+Author: Sascha Laue <Sascha.Laue@gmx.biz>
+Date: Thu Apr 3 14:43:11 2008 +0200
+
+ lwmon5: disable CONFIG_ZERO_BOOTDELAY
+
+ Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
+
+commit 53eec6f1d25932e76d63ccb14082792b0b96bf41
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Apr 2 08:03:58 2008 +0200
+
+ ds174x: Fix warning on return in rtc_get and rtc_set functions
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit a253b38bf50c85227c33ca0febc870ee49d1588e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Apr 2 08:03:57 2008 +0200
+
+ cmd_log.c: Fix assignment differ in signedness
+
+ In function 'logbuff_init_ptrs':
+ cmd_log.c:79: warning: pointer targets in assignment differ in signedness
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6c0e9a8f1cc090fbfbc6f86b6b4fd17a1628f3df
+Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
+Date: Wed Apr 2 11:04:43 2008 +0530
+
+ Remove duplicate #undef SHOW_INFO in drivers/usb/usb_ohci.c
+
+ Signed-off-by: gururaja hebbar <gururajakr@sanyo.co.in>
+
+commit 478d5ec9ae3cbcc6040241d2d73dbbc61fe9b49d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Apr 1 14:07:10 2008 +0200
+
+ s3c4510b_eth: fix 'packed' attribute ignored for fields of MACFrame
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit c08fb3ea36d19b1640b7906264581e9105534399
+Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+Date: Tue Apr 15 10:24:14 2008 +0200
+
+ Additional PCI IDs for IDE and network controllers
+
+ These PCI IDs are required by the Linkstation platforms.
+
+ Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+
+commit c0559be371b2a64b1a817088c3308688e2182f93
+Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
+Date: Mon Apr 14 23:01:50 2008 +0200
+
+ Change env_get_char from a global function ptr to a function.
+
+ This avoids an early global data reference.
+
+ Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+
+commit 3e0f331c05d72f140715c1e9fca991927e44d422
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Tue Apr 29 12:35:08 2008 +0000
+
+ Clean up smsc911x driver
+
+ Replace direct register address derefencing with accessor functions.
+ Restrict explicitly 32-bit bus-width, extend affected configurations
+ respectively.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit de1b686b763aa8b87a86f6748ce9169e7fc0e4cd
+Author: Sascha Hauer <s.hauer@pengutronix.de>
+Date: Tue Apr 15 00:08:20 2008 -0400
+
+ This patch adds a driver for the following smsc network controllers:
+ LAN9115
+ LAN9116
+ LAN9117
+ LAN9215
+ LAN9216
+ LAN9217
+
+ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+ Signed-off-by: Guennadi Liakhovetski<lg@denx.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3dfd4aab929cccddb63d9ea509967861e1333b52
+Author: Sascha Laue <Sascha.Laue@gmx.biz>
+Date: Tue Apr 1 15:13:03 2008 +0200
+
+ Fix watchdog POST for lwmon5
+
+ If the hardware watchdog detects a voltage error, the watchdog sets
+ GPIO62 to low. The watchdog POST has to detect this low level.
+
+ Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i>
+
+commit 24b448448a917e52806f82660a5c9d47608894fb
+Author: Dave Liu <r63238@freescale.com>
+Date: Tue Apr 1 15:22:11 2008 +0800
+
+ ata: update the libata.h from ata.h of linux kernel
+
+ Current libata.h of u-boot is out of sync from linux kernel,
+ this patch make it be consistent with linux kernel.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Tor Krill <tor@excito.com>
+
+commit f8f9dc98883f66f59eb0601da65808e6b139c87c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Mar 31 11:59:27 2008 -0500
+
+ Allow use of ARCH=powerpc when building
+
+ The linux kernel is now mostly ARCH=powerpc, so to make life easier
+ allow use to use ARCH=powerpc and convert it to ARCH=ppc.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8af657d2c6d1ca4f2f76973531394d4578ba2ef0
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Mon Mar 31 10:40:54 2008 +0900
+
+ Add apollon board MAINTAINERS entry
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 77e475cc0ed1832160017d364be32a0be9ff02a9
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Mon Mar 31 10:40:36 2008 +0900
+
+ Fix OneNAND read
+
+ It should access with 16-bit instead of 8-bit
+
+ Now it uses the generic memcpy with 8-bit access. It means it reads wrong data from OneNAND.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit a9da2b41079d230db3a5641625311983f85ce1fb
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Mon Mar 31 10:40:19 2008 +0900
+
+ Fix OneNAND erase command
+
+ It mis-calculates the block address.
+ Also fix DECLARE_GLOBAL_DATA_PTR in env_onenand.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 61525f2ffa156665a66908fda47dbf29d65ea579
+Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+Date: Mon Mar 31 01:32:15 2008 +0200
+
+ Support for LinkStation / KuroBox HD and HG PPC models
+
+ This patch is based on the port by Mihai Georgian (see linkstation.c for
+ Copyright information) and implements support for LinkStation / KuroBox HD
+ and HG PPC models from Buffalo Technology, whereby HD is deactivated at
+ the moment, pending network driver fixing.
+
+ Notice to users: this is pretty much a barebone port. Support for network
+ on HG models is already in the U-Boot mainline, but you might also want
+ patches to switch fan / phy modes depending on the negotiated ethernet
+ parameters. This patch also doesn't support console switching, booting EM
+ mode, Buffalo specific ext2 magic number. So, if you want to use any of
+ those, you need additional patches. Otherwise this patche provides a fully
+ functional u-boot with a network console on your system.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 0f3ba7e9783f352318f197a3148f6d5cc3d75bea
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Sun Mar 30 01:22:13 2008 -0500
+
+ Add CONFIG_MII_INIT support to related boards
+
+ Replace CONFIG_8xx and CONFIG_MCF532x to CONFIG_MII_INIT in
+ cmd_init.c. Add CONFIG_MII_INIT to board configuration files
+ that use mii_init() in cmd_init.c.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit f33fca22e76f20e4e4793810ca7a06a4805a6cf4
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Sun Mar 30 01:19:06 2008 -0500
+
+ Update CONFIG_PCIAUTO_SKIP_HOST_BRIDGE to related boards
+
+ Remove test for CONFIG_MPC5200 in drivers/pci/pci_auto.c and define
+ CONFIG_PCIAUTO_SKIP_HOST_BRIDGE in related board configuration files.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit e99ccb488181d012248c6be30b2093e950319fc5
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Mar 27 11:46:38 2008 -0500
+
+ Introduce phys_size_t and move phys_addr_t into asm/types.h
+
+ Also add CONFIG_PHYS_64BIT on powerpc to deal with 32-bit ppc's
+ that have larger physical addresses like 44x, 85xx, and 86xx.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 20a14a42a25f72e379f38460b8a8484667536795
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Apr 2 16:19:07 2008 -0500
+
+ Rename include/md5.h to include/u-boot/md5.h
+
+ Some systems have md5.h installed in /usr/include/. This isn't the
+ desired file (we want the one in include/md5.h). This will avoid the
+ conflict. This fixes the host tools building problem by creating a new
+ directory for U-Boot specific header files.
+
+ [Patch by Andy Fleming, modified to use separate directory by Wolfgang
+ Denk]
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+ Acked-by: Timur Tabi <timur@freescale.com>
+
+commit f297b7a1ec87433f66320d89d993e1bc738c66b8
+Author: Dave Liu <r63238@freescale.com>
+Date: Thu Mar 27 18:51:17 2008 +0800
+
+ drivers: code clean up
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 0ff7cba4a2e51c90827f6d21a0b28b4d67109597
+Author: Dave Liu <r63238@freescale.com>
+Date: Thu Mar 27 18:50:41 2008 +0800
+
+ drivers: clean up the ata_piix.h
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit e8f7ba404f1409606962815ecc955a06984b08b3
+Author: Dave Liu <r63238@freescale.com>
+Date: Thu Mar 27 18:49:56 2008 +0800
+
+ doc: english polishing for README.sata
+
+ according to gvb's suggestion, polishing for the doc.
+
+ Signed-off-by: Jerry Van Baren <gerald.vanbaren@ge.com>
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 3e3f766a5274d204780460e1879723b565296d34
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Mar 26 18:53:28 2008 -0500
+
+ Fix warnings introduced by I2C bus speed setting patch
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3c735e7437150e8615f26930c7819db85634276d
+Author: eran liberty <eran.liberty@gmail.com>
+Date: Thu Mar 27 00:50:49 2008 +0100
+
+ Altera Stratix II support
+
+ Adds Support for Altera's Stratix II.
+
+ Within your board specific init file you will have to call
+
+ 1. fpga_init (/* relocated code offset. usually => */ gd->reloc_off);
+ 2. fpga_add (fpga_altera, (Altera_desc*)&altera_desc);
+
+ Altera_desc* contines (for example):
+ {
+ Altera_StratixII, /* part type */
+ passive_serial, /* interface type */
+ 1, /* bytes of data part can accept */
+ (void *)(&funcs), /* interface function table */
+ 0L, /* base interface address */
+ 0 /* implementation specific cookie */
+ }
+
+ funcs is the interface. It is of type altera_board_specific_func.
+ It looks like this:
+ altera_board_specific_func func = {
+ pre_fn,
+ config_fn,
+ status_fn,
+ done_fn,
+ clk_fn,
+ data_fn,
+ abort_fn,
+ post_fn,
+ };
+
+ you will have to implement these functions, which is usually bit
+ banging some gpio.
+
+ Signed-off-by: Eran Liberty <liberty@extricom.com>
+
+commit 5ece9ec9f6cd52950ab848e2fe422dacf1d3a335
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Apr 13 14:32:54 2008 -0700
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5ad862166aa24d62a69aa9c708f6b2f5c0d28fb7
+Author: Sascha Hauer <s.hauer@pengutronix.de>
+Date: Wed Mar 26 20:41:17 2008 +0100
+
+ Phytec Phycore-i.MX31 support
+
+ This patch adds support for the Phytec Phycore-i.MX31 board
+
+ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit caebc95be3b42e5147b5fac7672ac4b2693ef7e1
+Author: Sascha Hauer <s.hauer@pengutronix.de>
+Date: Wed Mar 26 20:41:09 2008 +0100
+
+ mx31 litekit support
+
+ This patch adds support for the mx31 litekit board
+
+ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit cdace0661208754a53019ea0dc7b803a040e0939
+Author: Sascha Hauer <s.hauer@pengutronix.de>
+Date: Wed Mar 26 20:40:49 2008 +0100
+
+ add an i2c driver for mx31
+
+ This patch adds an i2c driver for Freescale i.MX processors
+
+ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 9b56f4f0306f3940b0aafd823ed6ecfc2d75d6c6
+Author: Sascha Hauer <s.hauer@pengutronix.de>
+Date: Wed Mar 26 20:40:42 2008 +0100
+
+ core support for Freescale mx31
+
+ This patch adds the core support for Freescale mx31
+
+ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 7ec68862a27c8f6f6d566228de8f6724d964a939
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Apr 13 14:19:23 2008 -0700
+
+ Fix compile error
+
+ ...as suggested by Peter Pearse
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 5252ed95204bdf55bec5a90ea69860bf2f78c643
+Author: Sascha Hauer <s.hauer@pengutronix.de>
+Date: Wed Mar 26 20:40:36 2008 +0100
+
+ Separate omap24xx specific code from arm1136
+
+ Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136
+ to cpu/arm1136/omap24xx.
+
+ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 1f1d88dd40815332df32982e739f2ddd2da6fe1a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Jan 29 18:21:05 2008 -0500
+
+ disable caches before booting an app for Blackfin apps
+
+ It isn't generally save to execute applications outside of U-Boot with caches
+ enabled due to the way the Blackfin processor handles caches (requires
+ software assistance). This patch disables caches before booting an ELF or
+ just booting raw code. The previous discussion on the patch was that we
+ wanted to use weaks instead, but that proved to not be feasible when multiple
+ symbols are involved, which puts us back at the ifdef solution. I've
+ minimized the ugliness by moving the setup step outside of the main function.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit e6dfed705efa44ebf00d21bb1588c6ccc8f3ad32
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Apr 13 10:03:54 2008 -0700
+
+ ppc: Get rid of unused machine type definitions
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 1aeed8d71acb3290cf2446f316d6ba437e7881c4
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Apr 13 09:59:26 2008 -0700
+
+ Coding Style cleanup; update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 7754f33c6fb7a2c050388d20bf3847038558bdcf
+Author: Larry Johnson <lrj@acm.org>
+Date: Thu Feb 21 13:58:11 2008 -0500
+
+ LM73 bug fix for negative temperatures and cleanup
+
+ When the LM73 temperature sensor measures a temperature below 0 C, the
+ current driver does not perform sign extension, so the result returned is
+ 512 C too high. This patch fixes the problem, and does general cleanup
+ of the code.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 96ef831f713289afba19da0c8f905e99da2b23e0
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Thu Apr 3 13:36:02 2008 +0200
+
+ cfi_flash: Support buffered writes on non-standard Spansion NOR flash
+
+ Some NOR flash chip from Spansion, for example, the s29ws-n MirrorBit
+ series require different addresses for buffered write commands. Define a
+ configuration option to support buffered writes on those chips. A more
+ elegant solution would be to automatically detect those chips by parsing
+ their CFI records, but that would require introduction of a fixup table
+ into the cfi_flash driver.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 3f9c542d3d69b1a10a5e193e779133a0454d1f44
+Author: Lee Nipper <lee.nipper@freescale.com>
+Date: Thu Apr 10 09:35:06 2008 -0500
+
+ mpc83xx: Update DIMM data bus width test to support 40-bit width
+
+ 32-bit wide ECC memory modules report 40-bit width.
+ Changed the DIMM data bus width test to 'less than 64' instead of 'equal 32'.
+
+ Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 5fb5a689d822ca61e814bd523fc930af335242fa
+Author: Dave Liu <r63238@freescale.com>
+Date: Mon Mar 31 17:05:12 2008 +0800
+
+ mpc83xx: Fix the bug of serdes initialization
+
+ Currently the serdes will not be initializated due to the
+ partid's error.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 2000784818f043db7ca60e2846a72d097766b894
+Author: Dave Liu <r63238@freescale.com>
+Date: Thu Apr 3 16:28:29 2008 +0800
+
+ mpc83xx: Fix the SATA clock setting of 837x targets
+
+ Currently the SATA controller clock is configured as CSB clock,
+ usually the CSB clock is 400/333/266MHz.
+
+ However, The SATA IP block is only guaranteed to operate up to
+ 200 MHz as stated in the HW spec.
+
+ The bug is reported by Joe D'Abbraccio <ljd015@freescale.com>
+
+ This patch makes the SATA clock as half of CSB clock.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 1ac4f320bf0b593aa0a741f2d649a8ece8838672
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Apr 2 13:41:21 2008 +0200
+
+ mpc837xerdb: Fix warning: implicit declaration of function 'fdt_fixup_dr_usb'
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 97b3ecb575a92fa34c1765229dbc06f2b662f139
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Apr 9 04:20:57 2008 -0500
+
+ 85xx: Fix detection of MP cpu spin up
+
+ We were looking at the wrong memory offset to determine of a secondary
+ cpu had been spun up or not. Also added a warning message if the
+ all the secondary cpus we expect don't spin up.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f3e04bdc3f360c66801a9048956e61e41a16edba
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Apr 8 10:45:50 2008 -0500
+
+ 85xx: Use SVR_SOC_VER instead of SVR_VER
+
+ The recent change introduced by 'Update SVR numbers to expand support'
+ now requires that we use SVR_SOC_VER instead of SVR_VER if we want
+ to compare against a particular processor id.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 5b2052e5f5fcce5dbd4d2750a29c0e45bce806e7
+Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
+Date: Fri Apr 11 10:00:35 2008 -0400
+
+ ppc4xx: Fix power mgt definitions for PPC440
+
+ Corrected DCR addresses of PPC440EP power management registers.
+
+ Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
+
+commit 950a392464e616b4590bc4501be46e2d7d162dea
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri Apr 11 15:11:26 2008 +0200
+
+ Revert merge of git://www.denx.de/git/u-boot-arm, commit 62479b18:
+
+ Reverting became necessary after it turned out that the patches in
+ the u-boot-arm repo were modified, and in some cases corrupted.
+
+ This reverts the following commits:
+
+ 066bebd6353e33af3adefc3404560871699e9961
+ 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
+ c88ae20580b2b01487b4cdcc8b2a113f551aee36
+ a147e56f03871bba4f05058d5e04ce7deb010b04
+ d6674e0e2a6a1f033945f78838566210d3f28c95
+ 8c8463cce44d849e37744749b32d38e1dfb12e50
+ c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
+ 8bf69d81782619187933a605f1a95ee1d069478d
+ 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
+ a574a73852a527779234e73e17e7597fd8128882
+ 1377b5583a48021d983e1fd565f7d40c89e84d63
+ 1704dc20917b4f71e373e2c888497ee666d40380
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 64e541f4c1b413dd84c7e409f5c2bf328db2ac13
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Apr 11 07:02:29 2008 +0200
+
+ ppc4xx: Update Kilauea defconfig to use device-tree booting as default
+
+ This patch reworks the default environment on Kilauea/Haleakala. Now
+ "net_nfs" for exmaple uses the device-tree style booting formerly know
+ as "net_nfs_fdt". Also the addresses in RAM were changed because of the
+ new image booting support, which check for image overwriting. So the
+ addresses needed togeet adjusted.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 756f5dacda3810b094b94bcceffd3ce6c7ff9a28
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 9 11:58:02 2008 +0200
+
+ ppc4xx: Fix Canyonlands default environment to work with new image support
+
+ Since the new image support checks for image overwriting, the default
+ environment needs to get adjusted to use correct addresses.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit dfc6c7b647dba7ab86749616f0e9e5740deed422
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 9 11:54:11 2008 +0200
+
+ ppc: Revert patch 70431e8a that used _start instead of CFG_MONITOR_BASE
+
+ The patch 70431e8a7393b6b793f77957f95b999fc9a269b8 (Make MPC83xx one step
+ closer to full relocation.) doesn't use CFG_MONITOR_BASE anymore. But
+ on 4xx systems _start currently cannot be used for this calculation.
+ So revert back to the original version for now.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f91374f65eae8b42cac329e06ba1c54728278efb
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Mar 28 12:49:52 2008 +0100
+
+ microblaze: Sort microblaze boards in MAKEALL script
+
+commit 62032deb7214c6d9b4396297e2aaa559bc2f8495
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Mar 28 11:58:45 2008 +0100
+
+ microblaze: clean microblaze_config.mk
+
+ FLAGS are generated by U-BOOT generator.
+ Board specific FLAGS are in board directory
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit cf5c679ca04a6b54bf53a55b8b9c29335b387287
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Mar 28 12:47:19 2008 +0100
+
+ microblaze: xupv2p fix config file for supporting FDT
+
+commit 188dc16b189143573b1ed90e584bf866d75cdd12
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Mar 28 11:53:02 2008 +0100
+
+ microblaze: ml401 fix config file for supporting FDT
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 4c6a6f02e239236261333759997eeaf86b30b54c
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Mar 28 11:22:48 2008 +0100
+
+ microblaze: ml401 - add ifdef for GPIO
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit af7ae1a411c67ee9d17a66d17ce50b374f3dd4e7
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Mar 28 12:13:03 2008 +0100
+
+ microblaze: clean uart16550 and uartlite handling
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 0b20f250877441460fb79d72192954abe8498834
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Mar 28 11:08:31 2008 +0100
+
+ microblaze: Add Emaclite driver to Makefile
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 868cde5310f88234b774878e4f06e79df10a88b3
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Mar 28 11:08:01 2008 +0100
+
+ microblaze: Add Emac driver to Makefile
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 6f961b4f461f6cbb83a467d468a02e6078c2b327
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Mar 28 12:42:29 2008 +0100
+
+ microblaze: add Emac ethernet driver
+
+commit 89c53891b18cbafd29ab8931b40e27ad231b6085
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Mar 28 12:41:56 2008 +0100
+
+ microblaze: add Emaclite ethernet driver
+
+commit e5845e21224dbe2fe47b11f1cdf95de7f84be7cb
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Mar 28 11:04:01 2008 +0100
+
+ microblaze: ML401 and XUPV2P remove emac and emaclite reference
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 6bf3e982aefdb1daf9f5462d482c8f9d1cc90a57
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Mar 28 10:59:32 2008 +0100
+
+ microblaze: remove old setting for emac driver
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit cd2b75efb9cc037c74ecee9b3586f9bf9e1d4e57
+Author: Michal Simek <monstr@monstr.eu>
+Date: Fri Mar 28 10:58:15 2008 +0100
+
+ microblaze: Clean Makefile from ancient emac driver
+
+ Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit ab68f921d9c741830f721c3d879c13a0c5597183
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Fri Mar 28 10:20:43 2008 +0100
+
+ SPARC/LEON2: added support for Gaisler simulator GRSIM/TSIM for SPARC/LEON2 targets. See www.gaisler.com for information.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+
+commit 6ed8a43a19bb0275501bc286007daafa923552cf
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Wed Mar 26 23:38:48 2008 +0100
+
+ SPARC/LEON3: added support for GR-CPCI-AX2000 FPGA AX board. The FPGA is exchangeable but a standard LEON3 design is assumed. See www.gaisler.com for information.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+
+commit 6940383d9ec1bfe2f13e339e6f723e8d34af2b12
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Wed Mar 26 23:34:47 2008 +0100
+
+ SPARC/LEON3: added support for Altera NIOS Development kit (STRATIX II Edition) with GRLIB template design. See www.gaisler.com for information.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+
+commit 823edd8a66ed50af5aaba0c79567f67061e4d79a
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Fri Mar 28 10:06:52 2008 +0100
+
+ SPARC/LEON3: added support for Gaisler GRSIM/TSIM2 SPARC/LEON3 simulatorn. See www.gaisler.com for information.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+
+commit 71d7e4c0489e5ed8fc69382236aaa2a1e510c135
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Wed Mar 26 23:26:48 2008 +0100
+
+ SPARC/LEON3: added support for GR-XC3S-1500 board with GRLIB template design. See www.gaisler.com for board information.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+
+commit b330990c2f36ee4a8bb318360e1c8ba965269ab6
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Fri Mar 28 10:00:33 2008 +0100
+
+ SPARC: Added support for SPARC LEON2 SOC Processor.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+
+commit 2a2fa797e63b1e3cd4d570318ca5fbf8723ef53a
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Wed Mar 26 23:00:38 2008 +0100
+
+ SPARC/LEON3: Added AMBA Bus Plug&Play information print command (ambapp). It can print available cores (type: AHB Master, AHB Slave, APB Slave), their address ranges, IRQ number and version.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+
+commit 1e9a164e22976933002c5e4b0b79b09fcede9cd4
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Wed Mar 26 22:51:29 2008 +0100
+
+ SPARC: Added support for SPARC LEON3 SOC processor.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+
+commit bf3d8b31169546fcddb4737391e1893fb12d033a
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Fri Mar 28 08:29:26 2008 +0100
+
+ SPARC: added SPARC support for new uimage in common code.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+
+commit 00ab32c85405a4fe65fd4128243086210fc90a21
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Wed Mar 26 22:36:03 2008 +0100
+
+ SPARC: added SPARC board information to the command bdinfo.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+
+commit c2f02da21a3f37f0878554eebc785e04fdc4e128
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Fri Mar 28 09:47:00 2008 +0100
+
+ SPARC: Added generic support for SPARC architecture.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+
+commit e54ec0f016803e4d9524ff71f7971bda0c51b287
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Apr 3 14:50:34 2008 +0200
+
+ ppc4xx: Fix 4xx enet driver to support 460GT EMAC2+3
+
+ This patch fixes a problem with the RGMII setup of the 460GT. The 460GT
+ has 2 RGMII instances and we need to configure the 2nd RGMII instance
+ for the EMAC2+3 channels.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c2a545ce33b26d80337f80b533828839249fb1c9
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Apr 2 08:03:56 2008 +0200
+
+ MPC8xx: Fix libfdt support introduced in commit 77ff7b74
+
+ fdt.c: In function 'ft_cpu_setup':
+ fdt.c:33: warning: implicit declaration of function 'do_fixup_by_prop_u32'
+ fdt.c:39: warning: implicit declaration of function 'do_fixup_by_compat_u32'
+ fdt.c:43: warning: implicit declaration of function 'fdt_fixup_ethernet'
+ fdt.c:45: warning: implicit declaration of function 'fdt_fixup_memory'
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 4abd844d8eb108736e1cf8fbf3dbf61f2d5fc11b
+Author: Andy Fleming <afleming@freescale.com>
+Date: Mon Mar 31 20:45:56 2008 -0500
+
+ Fix fdt set command to conform to dts spec
+
+ The fdt set command was treating properties specified as <00> and <0011>
+ as byte streams, rather than as an array of cells. As we already have
+ syntax for expressing the desire for a stream of bytes ([ xx xx ...]),
+ we should use the <> syntax to describe arrays of cells, which are always
+ 32-bits per element. If we imagine this likely (IMHO) scenario:
+
+ > fdt set /ethernet-phy@1 reg <1>
+
+ With the old code, this would create a bad fdt, since the reg cell would be
+ made to be one byte in length. But the cell must be 4 bytes, so this would
+ break mysteriously.
+
+ Also, the dts spec calls for constants inside the angle brackets (<>)
+ to conform to C constant standards as they pertain to base.
+ Take this scenario:
+
+ > fdt set /ethernet@f00 reg <0xe250000\ 0x1000>
+
+ The old fdt command would complain that it couldn't parse that. Or, if you
+ wanted to specify that a certain clock ran at 33 MHz, you'd be required to
+ do this:
+
+ > fdt set /mydev clock <1f78a40>
+
+ Whereas the new code will accept decimal numbers.
+
+ While I was in there, I extended the fdt command parser to handle property
+ strings which are split across multiple arguments:
+
+ > fdt set /ethernet@f00 interrupts < 33 2 34 2 36 2 >
+ > fdt p /ethernet@f00
+ ethernet@f00 {
+ interrupts = <0x21 0x2 0x22 0x2 0x24 0x2>;
+ };
+
+ Lastly, the fdt print code was rearranged slightly to print arrays of cells
+ if the length of the property is a multiple of 4 bytes, and to not print
+ leading zeros.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 1c2926abdd7db89296a8cc7f224dd9d5d4e37a56
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 2 08:39:33 2008 +0200
+
+ ppc4xx: Canyonlands: Init SATA/PCIe port correctly
+
+ Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
+ interface. This usage can be configured with the jumper J6. This patch
+ correctly configures the SATA/PCIe PHY for SATA usage when this jumper
+ is installed.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6fe2946f198481254a6ee9600d7456b8316a4083
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Mar 28 17:37:49 2008 -0500
+
+ remove remaining CONFIG_OF_HAS_{UBOOT_ENV,BD_T} code
+
+ finish off what commit 43ddd9c820fec44816188f53346b464e20b3142d,
+ "Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T"
+ started.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit b5873f1732b92a25690e1513b90dfb0d644f6697
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Apr 1 07:30:51 2008 +0200
+
+ dataflash: Move CONFIG_HAS_DATAFLASH to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2d934ea51f276522b532f870a820e844ff480b5b
+Author: Tor Krill <tor@excito.com>
+Date: Fri Mar 28 15:29:45 2008 +0100
+
+ Add Vitesse 8601 support to TSEC driver
+
+ Add phy_info for Vitesse VSC8601.
+ Add config option, CFG_VSC8601_SKEWFIX, to enable RGMII skew timing compensation.
+
+ Signed-off-by: Tor Krill <tor@excito.com>
+ Reviewed-by: Kim Phillips <kim.phillips@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3eac6402a508b0f68a21cc9cbc2cc49347de0c31
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Mon Mar 31 14:25:00 2008 +0000
+
+ SPARC: added SMC91111 driver in and out macros for LEON processors.
+
+ This patch makes SPARC/LEON processors able to read and write
+ to the SMC91111 chip using the chip external I/O bus of the memory
+ controller. This patchs defines the standard in and out macros
+ expected by the SMC9111 driver.
+
+ To access that I/O bus one must set up the memory controller
+ (MCTRL or FTMCTRL) correctly. It is assumed that the user sets
+ up this correctly when the other MCTRL parameters are set up. It
+ can be set up from the board configuration header file.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3ca7c558eba36332556bc470d45e2f5d42bd0ca6
+Author: Stelian Pop <stelian@popies.net>
+Date: Wed Mar 26 18:52:34 2008 +0100
+
+ Add maintainership information for AT91CAP9ADK and AT91SAM9260EK boards
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit 4e03dde84dd2c91e327cdc23ae119d432559a7a3
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Mar 31 21:31:04 2008 +0200
+
+ AT91SAM9260EK: Move CONFIG_CMD_NAND to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0176d43e759a6e00cacc85eff26fd60f74b4f6b7
+Author: Stelian Pop <stelian@popies.net>
+Date: Wed Mar 26 18:52:33 2008 +0100
+
+ Add support for AT91SAM9260EK
+
+ Support for booting from internal DataFlash, external DataFlash card
+ or NAND flash is available.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit 1762f13b4aab88b685b1722f17dada247945624b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Mar 31 21:20:49 2008 +0200
+
+ AT91SAM9: Move CONFIG_HAS_DATAFLASH to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 761712188b353494defb2b644491ff73d0daaa6f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Mar 31 21:12:17 2008 +0200
+
+ AT91CAP9ADK: Move CONFIG_CMD_NAND to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 983c1db04c1dd0f92e02f06d29f0c65a3d9a2687
+Author: Stelian Pop <stelian@popies.net>
+Date: Wed Mar 26 20:52:32 2008 +0100
+
+ Port AT91CAP9 to the new headers
+
+ Adapt the existing AT91CAP9 code to the new headers and APIs.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit 177e8a5ac81bbc531a1d54abdb47f2860266c3aa
+Author: Stelian Pop <stelian@popies.net>
+Date: Wed Mar 26 19:52:31 2008 +0100
+
+ Finish header files reworking
+
+ Replace AT91CAP9.h file with several splitted header files coming
+ from the Linux kernel.
+
+ This is part 2 of the replacement: more header imports and edits.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit 6d1dbbbf9fdf727384002e553e615c15d8b967f4
+Author: Stelian Pop <stelian@popies.net>
+Date: Wed Mar 26 19:52:30 2008 +0100
+
+ Import several header files from Linux
+
+ Replace AT91CAP9.h file with several splitted header files coming
+ from the Linux kernel.
+
+ This is part 1 of the replacement: pristine header files import.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit a8a78f2d99dc1bd30dc3595da118539b506c6118
+Author: Stelian Pop <stelian@popies.net>
+Date: Wed Mar 26 20:52:28 2008 +0100
+
+ Move at91cap9 specific files to at91sam9 directory
+
+ AT91CAP9 and AT91SAM9 SoCs are very close hardware wise, so a
+ common infrastructure can be used. Let this infrastructure be
+ named after the AT91SAM9 family, and move the existing AT91CAP9
+ files to the new place.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit 61106a565870ff503f92b251b94bd7afef889a04
+Author: Stelian Pop <stelian@popies.net>
+Date: Wed Mar 26 21:52:27 2008 +0100
+
+ Use timer_init() instead of board supplied interrupt_init()
+
+ The timer on AT91CAP9/AT91SAM9 is supplied by the SoC, and not by
+ the board, so use timer_init() instead of interrupt_init().
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit 5604e2178c5218fbfdba2e4293ca7652e829ac25
+Author: Stelian Pop <stelian@popies.net>
+Date: Wed Mar 26 21:52:36 2008 +0100
+
+ Cleanup DataFlash partition handling
+
+ DataFlash partition information has become a mess. This patch
+ defines a single partition scheme for Atmel DataFlashes. This partition
+ scheme will be used by all AT91CAP9 and AT91SAM9 boards.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit 9b46432fc65ce0f0826b32e4f15c15b33ccb8d42
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Fri Mar 28 08:47:45 2008 -0500
+
+ ColdFire: Fix alignment issue after CONFIG_IDENT_STRING in start.S
+
+ When the version_string function in start.S is not 4-byte align,
+ it will cause the compiler generates "unaligned opcodes detected
+ in executable segment". This issue affects all ColdFire CPUs.
+ By adding .align 4 after CONFIG_IDENT_STRING, it will pad 0's if
+ it is not aligned.
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Acked-by: John Rigby <jrigby@freescale.com>
+
+commit bae61eefe15b4d454060a7140e49ae58322be803
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Mar 25 15:41:15 2008 -0500
+
+ ColdFire: Add dspi and serial flash support for MCF5445x
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Acked-by: John Rigby <jrigby@freescale.com>
+
+commit 48ead7a7a922fceaf494e352abfab8216a41b417
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Tue Mar 18 17:37:01 2008 -0500
+
+ ColdFire: Remove R5200 board
+
+ This board never went into production
+
+ Signed-off-by: Zachary P. Landau <zachary.landau@labxtechnologies.com>
+ Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Acked-by: John Rigby <jrigby@freescale.com>
+
+commit 545c8e0a7cd3ca9d3846668f69b0d201250abea8
+Author: Matthew Fettke <[matthew.fettke@gmail.com]>
+Date: Thu Jan 24 14:02:32 2008 -0600
+
+ ColdFire: Added M5275EVB support.
+
+ Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Acked-by: John Rigby <jrigby@freescale.com>
+
+commit f71d9d91a2cd9c30b2b6369f15c1a46c11537c2b
+Author: Matthew Fettke <[matthew.fettke@gmail.com]>
+Date: Mon Feb 4 15:38:20 2008 -0600
+
+ ColdFire: Added MCF5275 cpu support.
+
+ Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Acked-by: John Rigby <jrigby@freescale.com>
+
+commit 44e5b9edab077aba6e9b849afa4b7fbd8fd7b02b
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Mar 17 12:14:11 2008 -0500
+
+ ColdFire: Define bootdelay in configuration file for M52277EVB
+
+ Signed-off-by: Matt Wadel <Matt.Waddel@freescale.com>
+ Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Acked-by: John Rigby <jrigby@freescale.com>
+
+commit 77878f16cedee17161ff2336990970fffc6cea35
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Mar 17 12:09:07 2008 -0500
+
+ ColdFire: Fix second memory Chipselect for M5475EVB
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Acked-by: John Rigby <jrigby@freescale.com>
+
+commit 43d60642395a550956cb21d287c8cfa563913d28
+Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Thu Mar 13 14:26:32 2008 -0500
+
+ ColdFire: Update correct FLASHBAR and RAMBAR1 for MCF5282
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Acked-by: John Rigby <jrigby@freescale.com>
+
+commit eb14ebe813a0cb5d47905228da446a5ad692473b
+Author: Larry Johnson <lrj@acm.org>
+Date: Sun Mar 30 20:33:04 2008 -0500
+
+ ppc4xx: Add CFG_MEM_TOP_HIDE to Denali SPD-based SDRAM setup
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 02e3892021112f21067d9ed1d04ae4182725ba52
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Mar 31 12:20:48 2008 +0200
+
+ ppc4xx: Small whitespace fix of esd patches
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 034394abb524785047c815f00dde8cdbdc1593c5
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Sun Mar 30 18:52:44 2008 +0200
+
+ ppc4xx: Cleanup PMC440 board support
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit a6cc6c37188d85c25d167a4515da86f48d9a583e
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Sun Mar 30 18:52:06 2008 +0200
+
+ ppc4xx: Add ptm configuration variables for PMC440
+
+ Add support for the ptm1la, ptm1ms, ptm2la and ptm2ms
+ environment variables.
+
+ Cleanup pci_target_init.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 7c91f51a2fe296909147f1646a1412729dd10b1d
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Sun Mar 30 18:01:15 2008 +0200
+
+ ppc4xx: Minor updates for DU440 boards
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit d5bffeb868d6b4d462f558dac43011027b6644b7
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Feb 19 00:54:20 2008 -0500
+
+ Blackfin: cleanup and overhaul common board init functions
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b86b3416f874358acaf07519e7620cdb2145f75b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Feb 19 00:50:58 2008 -0500
+
+ Blackfin: cleanup lib_blackfin/cache.c
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 9171fc81722c20fdb5a829a58b17c9eaadd5fb44
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Mar 30 15:46:13 2008 -0400
+
+ Blackfin: unify cpu and boot modes
+
+ All of the duplicated code for Blackfin processors and boot modes have been
+ unified. After all, the core is the same for all processors, just the
+ peripheral set differs (which gets handled in the drivers).
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 880cc4381ea8360248cddcdf87a64566745a5724
+Author: Stelian Pop <stelian@popies.net>
+Date: Wed Mar 26 22:52:35 2008 +0100
+
+ Fix CFG_NO_FLASH compilation.
+
+ Many Atmel boards have no "real" (NOR) flash on board, and rely only
+ on DataFlash and NAND memories. This patch enables CFG_NO_FLASH to
+ be present in a board configuration file, while still enabling flash
+ commands like 'flinfo', 'protect', etc.
+
+ Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit 9ce7e53abd039decea1af67aec81bbd5df7a2593
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Feb 19 00:58:13 2008 -0500
+
+ Blackfin: BF537-stamp: cleanup spi flash driver
+
+ This punts the old spi flash driver for a new/generalized one until the
+ common one can be integrated.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit bb8e3cf25bc0b04936c0c1a075985dd8700a244b
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Sun Mar 30 11:34:34 2008 -0400
+
+ Fix macro typo in common/cmd_mii.c
+
+ This typo was introduced in commit 233a8bcd94997f3f345833a3b82e836222f2a206. I
+ actually applied the wrong patch.
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit f1b985f2d724ccaa4d3def07917f0caaf18fa77d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 30 16:39:53 2008 +0200
+
+ use correct at91rm9200 register name in m501sk board
+
+ This fixes a naming bug for at91rm9200 lowlevel init code:
+ NOR boot flash is on chipselect 0, not chipselect 2. This
+ makes code use the register name from chip datasheets.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 480ed1dea103a1c8f4591afc77d2de3c7868d983
+Author: David Brownell <david-b@pacbell.net>
+Date: Fri Jan 18 12:55:00 2008 -0800
+
+ use correct at91rm9200 register name
+
+ This fixes a naming bug for at91rm9200 lowlevel init code:
+ NOR boot flash is on chipselect 0, not chipselect 2. This
+ makes code use the register name from chip datasheets.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit a3543d6dc52b0ba9c64016687cf32d600b31a476
+Author: David Brownell <david-b@pacbell.net>
+Date: Fri Jan 18 12:45:45 2008 -0800
+
+ add missing ARM boards to MAKEALL
+
+ Add some missing ARM boards to MAKEALL. These build correctly,
+ unlike several of the boards already listed.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit 066bebd6353e33af3adefc3404560871699e9961
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Sun Mar 30 11:34:09 2008 +0100
+
+ Bracket READ_TIMER macro in cpu/arm1136/omap24xx/interrupts.c
+ to prevent compilation error.
+
+ Signed-off-by: Peter Pearse <peter.pearse@arm.com>
+
+commit 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
+Author: Guennadi Liakhovetski <[lg@denx.de]>
+Date: Sun Mar 30 11:32:30 2008 +0100
+
+ Support for the MX31ADS evaluation board from Freescale
+
+ This patch adds support for the MX31ADS evaluation board from Freescale,
+ initialization code is copied from RedBoot sources, also provided by Freescale.
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit c88ae20580b2b01487b4cdcc8b2a113f551aee36
+Author: Sascha Hauer <s.hauer@pengutronix.de>
+Date: Sun Mar 30 11:32:27 2008 +0100
+
+ Phytec Phycore-i.MX31 support
+
+ This patch adds support for the Phytec Phycore-i.MX31 board
+
+ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit a147e56f03871bba4f05058d5e04ce7deb010b04
+Author: Sascha Hauer <s.hauer@pengutronix.de>
+Date: Sun Mar 30 11:32:24 2008 +0100
+
+ mx31 litekit support
+
+ This patch adds support for the mx31 litekit board
+
+ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit d6674e0e2a6a1f033945f78838566210d3f28c95
+Author: Sascha Hauer <s.hauer@pengutronix.de>
+Date: Sun Mar 30 11:32:21 2008 +0100
+
+ add SMSC LAN9x1x Network driver
+
+ This patch adds a driver for the following smsc network controllers:
+ LAN9115
+ LAN9116
+ LAN9117
+ LAN9215
+ LAN9216
+ LAN9217
+
+ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 8c8463cce44d849e37744749b32d38e1dfb12e50
+Author: Sascha Hauer <s.hauer@pengutronix.de>
+Date: Sun Mar 30 11:32:16 2008 +0100
+
+ add an i2c driver for mx31
+
+ This patch adds an i2c driver for Freescale i.MX processors
+
+ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
+Author: Sascha Hauer <s.hauer@pengutronix.de>
+Date: Sun Mar 30 11:30:43 2008 +0100
+
+ core support for Freescale mx31
+
+ This patch adds the core support for Freescale mx31
+
+ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 8bf69d81782619187933a605f1a95ee1d069478d
+Author: Sascha Hauer <s.hauer@pengutronix.de>
+Date: Sun Mar 30 11:28:46 2008 +0100
+
+ Separate omap24xx specific code from arm1136
+
+ Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 to cpu/arm1136/omap24xx.
+
+ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
+Author: Peter Pearse <peter.pearse@arm.com>
+Date: Sun Mar 30 11:23:05 2008 +0100
+
+ Add pmdra into MAKEALL
+
+ Signed-off-by: Peter Pearse <peter.pearse@arm.com>
+
+commit a574a73852a527779234e73e17e7597fd8128882
+Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]>
+Date: Sun Mar 30 11:21:58 2008 +0100
+
+ Adds support for the Prodrive PMDRA board, based on a DM6441
+
+ Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
+
+commit 1377b5583a48021d983e1fd565f7d40c89e84d63
+Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]>
+Date: Sun Mar 30 11:11:34 2008 +0100
+
+ Removes all board specific code from the arch. part for DM644x (DaVinci) boards
+
+ Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
+
+commit 1704dc20917b4f71e373e2c888497ee666d40380
+Author: Dirk Behme <dirk.behme@gmail.com>
+Date: Sun Mar 30 11:09:01 2008 +0100
+
+ - Remove *_masked() functions as noted by Wolfgang
+ - Adapt register naming to recent TI spec (sprue26, March 2007)
+ - Fix reset_timer() handling
+ - As reported by Pieter [1] the overflow fix introduced a
+ delay of factor 16 (e.g 2 seconds became 32). While the
+ overflow fix is basically okay, it missed to divide udelay by
+ 16, too. Fix this.
+ [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179
+ - Remove software division of timer count value (DIV(x)
+ macro) and do it in hardware (TIM_CLK_DIV).
+ Many thanks to Troy Kisky <troy.kisky@boundarydevices.com>
+ and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for
+ the hints & testing!
+
+ Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
+
+ Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl>
+
+commit ac3315c26e143c31680750c9c13f027efbcc887e
+Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
+Date: Thu Mar 6 16:45:44 2008 +0100
+
+ new PHY @ e1000 - 2nd try
+
+ Add 82541ER device with latest integrated IGP2 PHY.
+ Introduced CONFIG_E1000_FALLBACK_MAC for NIC bring-up with empty eeprom.
+
+ Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit c2b7da552293b50c9c9e46ed71267b02c2de9ea8
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Fri Mar 28 20:22:53 2008 +0100
+
+ SPARC/LEON3: Added GRETH Ethernet 10/100/1000 driver.
+
+ GRETH is an Ethernet 10/100 or 10/100/1000 MAC with out without
+ a debug link (EDCL). The GRETH core is documented in GRIP.pdf
+ available at www.gaisler.com.
+
+ If the GRETH has GigaBit support (GBIT, Scatter gather, checksum
+ offloading etc.) can be determined by a bit in the control register.
+ The GBIT MAC is supported by operating in GRTEH 10/100 legacy mode.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 233a8bcd94997f3f345833a3b82e836222f2a206
+Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Mar 17 17:08:22 2008 -0500
+
+ Add CONFIG_MII_INIT in cmd_mii.c
+
+ Provide common configuration in do_mii() to execute mii_init()
+ for all cpu architectures
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit f605479de2deb11e834f31dfdb0af107c86aced6
+Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com>
+Date: Mon Mar 17 17:08:16 2008 -0500
+
+ ColdFire: Fix FEC transmit issue for MCF5275
+
+ Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d9a2f416d6ac6058cd7845033ae4dc32ef1c0746
+Author: Aras Vaichas <arasv@magtech.com.au>
+Date: Wed Mar 26 09:43:57 2008 +1100
+
+ DHCP request fix for Windows Server 2003
+
+ Added option CONFIG_BOOTP_DHCP_REQUEST_DELAY. This provides an optional
+ delay before sending "DHCP Request" in net/bootp.c. Required to overcome
+ interoperability problems with Windows Server 200x DHCP server when U-Boot
+ client responds too fast for server to handle.
+
+ Signed-off-by: Aras Vaichas <arasv@magtech.com.au>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 97bf85d784fbed485e652eb907589ad0d5cb7262
+Author: Daniel Hellstrom <daniel@gaisler.com>
+Date: Fri Mar 28 20:40:19 2008 +0100
+
+ MTD/CFI: flash_read64 is defined a weak function (for SPARC)
+
+ SPARC has implemented __raw_readq, it reads 64-bit from any 32-bit address.
+ SPARC CPUs implement flash_read64 which calls __raw_readq.
+
+ For current SPARC architectures (LEON2 and LEON3) each read from the
+ FLASH must lead to a cache miss. This is because FLASH can not be set
+ non-cacheable since program code resides there, and alternatively disabling
+ cache is poor from performance view, or doing a cache flush between each
+ read is even poorer.
+
+ Forcing a cache miss on a SPARC is done by a special instruction "lda" -
+ load alternative space, the alternative space number (ASI) is processor
+ implementation spcific and can be found by including <asm/processor.h>.
+
+ Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
+
+commit 70431e8a7393b6b793f77957f95b999fc9a269b8
+Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+Date: Fri Mar 28 15:41:25 2008 +0100
+
+ Make MPC83xx one step closer to full relocation.
+
+ Remove a few absolute references to CFG_MONITOR_BASE for ppc/mpc83xx
+ and use GOT relative reference.
+
+ Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 5b2793a3f3de34d439232b05acc8af67a028fd35
+Author: Michael Barkowski <michael.barkowski@freescale.com>
+Date: Thu Mar 27 14:34:43 2008 -0400
+
+ mpc8323erdb: fix EEPROM page size and get MAC from EEPROM
+
+ This patch fixes eeprom page size so that you can now write more than
+ 64 bytes at a time.
+
+ It also makes the board take MAC addresses, if found, from EEPROM.
+
+ User should place up to 4 addresses at offset 0x7f00, for
+ eth{,1,2,3}addr. Any unused addresses should be zero. This group of
+ four six-byte values should have it's CRC at the end. crc32 and
+ eeprom commands can be used to accomplish this.
+
+ If CRC fails, MAC addresses come from the environment. If CRC
+ succeeds, the environment is overwritten at startup.
+
+ Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8f325cff31f6e745e6540014b131b9a97f61944c
+Author: Michael Barkowski <michael.barkowski@freescale.com>
+Date: Fri Mar 28 15:15:38 2008 -0400
+
+ mpc8323erdb: define CONFIG_PCI_SKIP_HOST_BRIDGE
+
+ Commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2 broke the onboard USB
+ controller on the PCI bus in Linux on the MPC8323ERDB.
+
+ This fixes it by defining CONFIG_PCI_SKIP_HOST_BRIDGE in the board's
+ config file.
+
+ Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit e5c4ade4db1e16d3e5d4a7887f34e10e516ed3a9
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Mar 28 10:19:07 2008 -0500
+
+ mpc83xx: cleanup System Part and Revision ID Register (SPRIDR) code
+
+ in the spirit of commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6,
+ 85xx's "Update SVR numbers to expand support", simplify SPRIDR processing
+ and processor ID display. Add REVID_{MAJ,MIN}OR macros to make
+ REVID dependent code simpler. Also added PARTID_NO_E and IS_E_PROCESSOR
+ convenience macros.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 81fd52c6c8fd19f0b7856b98217ce37c46c521af
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Mar 28 10:18:53 2008 -0500
+
+ mpc83xx: display ddr frequency in board_add_ram_info banner
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 35cf155c5ec1ceab2849fa5b6aa3d9a3e9e6f482
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Mar 28 10:18:40 2008 -0500
+
+ mpc83xx: unreinvent mem_clk
+
+ delete ddr_clk and use mem_clk instead. Rename other ddr_*_clk to
+ mem_*_clk for consistency's sake.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 730e792926ca3fe4dd1b734a3bf44e55afa6f536
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Fri Mar 28 14:31:23 2008 -0500
+
+ mpc83xx: enable the SATA interface on mpc8315 rdb and mpc837x rdb boards
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 2eeb3e4fc54ef2f5d574dafd42c6ce93afa30393
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Mar 26 22:57:19 2008 +0800
+
+ mpc83xx: enable the SATA interface on mpc837xemds board
+
+ Enable the first two SATA interfaces on MPC837xEMDS board,
+ The two SATA ports are on LYNX1. (SATA0/1 on J4/5)
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 6f8c85e8d1865730c158d9ef5a06c70c3a10600a
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Mar 26 22:56:36 2008 +0800
+
+ mpc83xx: initialize serdes for MPC837xEMDS boards
+
+ This patch is stolen from Anton Vorontsov's patch
+ for mpc837xerdb boards.
+
+ The reference clk and xcorevdd voltage of serdes1/2
+ is same between mpc837xemds and mpc837xerdb.
+
+ 8377E: LYNX1- 2 SATA LYNX2- 2 PCIE
+ 8378E: LYNX1- 2 SGMII LYNX2- 2 PCIE
+ 8379E: LYNX1- 2 SATA LYNX2- 2 SATA
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit cc8e839abc80887ae832767b5930d40edd6d7eb7
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Mar 28 14:09:04 2008 +0100
+
+ ppc4xx: Canyonlands: Print SATA/PCIe configuration and board revision
+
+ Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
+ interface. This usage can be configured with the jumper J6. This patch
+ displays the current configuration upon bootup and changes the PCIe
+ init loop, to only initialize the availabel PCIe slots.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 90447ecbbac8572457b6d8903073ac3f120995ba
+Author: Tor Krill <tor@excito.com>
+Date: Fri Mar 28 11:29:10 2008 +0100
+
+ MTD/CFI: Add support for 16bit legacy AMD flash
+
+ Add entry for 512Kx16 AMD flash to jedec_table.
+ Read out 16bit device id if chipwidth is 16bit.
+ Fixed coding style after Stefans feedback
+
+ Signed-off-by: Tor Krill <tor@excito.com>
+
+commit 5e12e75d17c4b15a310a45cd78fe71b7698a8a8e
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Mar 28 11:02:53 2008 +0100
+
+ ppc: Small change to CFG_MEM_TOP_HIDE description
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 280df59a8d62c6e74c281b1cb7e2052df4d6cb00
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Thu Mar 27 15:44:12 2008 +0900
+
+ sh: Add support stat structure and stat.h
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 4be9eb789e72b845d6693cc36b70a0b3529b3f09
+Author: Mark Jonas <toertel@gmail.com>
+Date: Sat Mar 22 19:27:52 2008 +0100
+
+ sh: Removed warning when compiling drivers/serial/serial_sh.c.
+
+ Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit f309fa38929ffba71230c02330ffa42f4bba6333
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Wed Mar 12 18:02:57 2008 +0900
+
+ sh: Remove disable_ctrlc function from R7780MP
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 6f4b266ff2a4fcc2bff985d6a217852469afddb3
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Wed Mar 12 17:55:15 2008 +0900
+
+ sh: Add maintainer of R7780MP to MAINTAINER file
+
+ Update MAINTAINER entry for R7780MP. And fix maintainer's name.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit f5e2466f7baa887a7df0c536333eea8231333497
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Tue Mar 25 17:11:24 2008 +0900
+
+ sh: Add support Renesas Solutions R2D plus board
+
+ R2D plus is SH reference board used with SH7751R.
+ This board has 266Mhz CPU, 64MB SDRAM, Cardbus, CF interface,
+ one PCI bus, VGA, and two Ethernet controller.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit e92c95180bb5bc5fd4051598a9d60beaba48988d
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Wed Mar 12 12:15:29 2008 +0900
+
+ sh: Add support SH4 cache control
+
+ Add support SH4 cache control and flash_cache function
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 28e5efde4d925fcb34901d0030d0648de2da7e89
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Mon Mar 24 01:53:01 2008 +0900
+
+ sh: Add support PCI host driver for SH7751/SH7751R
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit ab8f4d40d069cd3cbe7563ddfe3e5f03b0c7c721
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Mon Mar 24 02:11:26 2008 +0900
+
+ sh: Move SuperH PCI driver from cpu/sh4 to drivers/pci
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 566933278101c144d75361ea682678a326c1290d
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Wed Mar 12 12:10:28 2008 +0900
+
+ sh: Add support SuperH SH7751/SH7751R
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 3313e0e26224fc9a0c445124f3455058c696df84
+Author: Mark Jonas <toertel@gmail.com>
+Date: Mon Mar 10 11:37:10 2008 +0100
+
+ sh: Added support for SH7720 based board MPR2.
+
+ Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 3ecff1d70ae93e628fe65b3fe1fc7c9c76cdf99f
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Thu Mar 6 14:05:53 2008 +0900
+
+ sh: Fix receive FIFO level register of SH4A
+
+ Receive FIFO level register is different in SH4A.
+ Because register is different, cannot occasionally receive data.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c133c1fb0b590662206b0eba70f4478ee0300a9a
+Author: Yusuke Goda <goda.yusuke@renesas.com>
+Date: Tue Mar 11 12:55:12 2008 +0900
+
+ sh: Add support Renesas Solutions R7780MP
+
+ Renesas Solutions R7780MP is a reference board on SH7780.
+ This board has serial, 10/100 base Ethernet deivice, CF slot
+ and VGA devices. This board can set extension board.
+ Extension board has 10/100/1000 base Ethernet device, PCI slot,
+ S-ATA, iDVR slot.
+
+ Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 1a2334a4eb6386d7cd35d9de5fa39af2c764ad28
+Author: Yusuke Goda <goda.yusuke@renesas.com>
+Date: Wed Mar 5 14:30:02 2008 +0900
+
+ sh: Add support PCI of SuperH and SH7780
+
+ This patch add support PCI of SuperH base code and SH7780 specific code.
+
+ Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit b55523efff2ae11f0b9ae3cc405893c32eb78156
+Author: Yusuke Goda <goda.yusuke@renesas.com>
+Date: Wed Mar 5 14:23:26 2008 +0900
+
+ sh: Add support SH7780
+
+ SH7780 is CPU of Renesas Technology.
+ This CPU has
+ - CPU clock 400MHz
+ - PCI support
+ - DDR-SDRAM controller
+ - etc ...
+
+ Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c2042f5952a686c414031309b8f244513bf578f0
+Author: goda.yusuke <goda.yusuke@renesas.com>
+Date: Fri Jan 25 20:46:36 2008 +0900
+
+ sh: Add support Renesas Solutions Migo-R board
+
+ Migo-R is a board based on SH7722 and has may devices.
+ In this patch, supported SCIF, NOR flash and Ethernet.
+
+ Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 74d1e66d22dac91388bc538b2fe19f735edc5b82
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Thu Mar 27 15:06:40 2008 +0100
+
+ Fix host tool build breakage, take two
+
+ Revert commit 87c8431f and fix build breakage so that the build continues
+ to work on FC systems.
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 7e4a0d25ed18f6437bdf59ebfa49bb0edc2f24e6
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 19 09:36:47 2008 +0100
+
+ ppc4xx: Enable ECC on LWMON5
+
+ Since all ECC related problems seem to be resolved on LWMON5, this patch
+ now enables ECC support.
+
+ We have to write the ECC bytes by zeroing and flushing in smaller
+ steps, since the whole 256MByte takes too long for the external
+ watchdog.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6433fa202a91a6594dd48f06807ac38ba27fa0bb
+Author: Larry Johnson <lrj@acm.org>
+Date: Mon Mar 17 11:10:35 2008 -0500
+
+ ppc4xx: Updates to Korat-specific code
+
+ This patch contains updates for changes for the Korat PPC440EPx board.
+ These changes include:
+
+ (1) Support for "permanent" and "upgradable" copies of U-Boot, as
+ described in the new "doc/README.korat" file;
+
+ (2) a new memory map for the registers in the board's CPLD;
+
+ (3) a revised format for manufacturer's data in serial EEPROM; and
+
+ (4) changes to track updates to U-Boot for the Sequoia board.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit f766cdf89b3a2a7634b8c5869f606150e332036c
+Author: Markus Brunner <super.firetwister@gmail.com>
+Date: Thu Mar 27 10:46:25 2008 +0100
+
+ ppc4xx: PPC405EP Set EMAC noise filter bits
+
+ This bug was introduced with commit aee747f19b460a0e9da20ff21e90fdaac1cec359
+ which enabled CFG_4xx_GPIO_TABLE for PPC405 and unintentionally
+ disabled the setting of the emac noise filter bits for PPC405EP when CFG_4xx_GPIO_TABLE is set.
+
+ Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f66e2c8b25c04b79e5fb385bc8989c2de7f63991
+Author: Mike Nuss <mike@terascala.com>
+Date: Wed Feb 20 11:54:20 2008 -0500
+
+ ppc4xx: Reconfigure PLL for 667MHz processor for PPC440EPx
+
+ On PPC440EPx without a bootstrap I2C EEPROM, the PLL can be reconfigured
+ after startup to change the speed of the clocks. This patch adds the
+ option CFG_PLL_RECONFIG. If this option is set to 667, the CPU
+ initialization code will reconfigure the PLL to run the system with a CPU
+ frequency of 667MHz and PLB frequency of 166MHz, without the need for an
+ external EEPROM.
+
+ Signed-off-by: Mike Nuss <mike@terascala.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 87c8431fe24d48121f053fe67cff4ccfe097d4d1
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Thu Mar 27 09:12:40 2008 +0100
+
+ new-image: Fix host tool build breakage
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 6fb4b640562a10daff0dbe537638d511b5b48650
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Mar 27 10:24:03 2008 +0100
+
+ ppc: Set CFG_MEM_TOP_HIDE to 0 if not already defined
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9462732a3ec551c11862450902cd8ee1bedea6d9
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 19 10:23:43 2008 +0100
+
+ ppc4xx: Add fdt support to Prodrive alpr
+
+ Since this board will probably be ported to arch/powerpc in the
+ near future, we add device tree support now. This way we are
+ "ready" for arch/powerpc from now on.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 511e4f9e7f7b6719e4d91d7f0fc89412b13b5150
+Author: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl>
+Date: Mon Mar 17 09:27:56 2008 +0100
+
+ ppc4xx: Enable cache support on the ALPR board
+
+ Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
+
+commit 14f73ca679f6fdb44cff0b7304d419db41a0ab69
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 26 10:14:11 2008 +0100
+
+ ppc: Add CFG_MEM_TOP_HIDE option to hide memory area that doesn't get "touched"
+
+ If CFG_MEM_TOP_HIDE is defined in the board config header, this specified
+ memory area will get subtracted from the top (end) of ram and won't get
+ "touched" at all by U-Boot. By fixing up gd->ram_size the Linux kernel
+ should gets passed the now "corrected" memory size and won't touch it
+ either. This should work for arch/ppc and arch/powerpc. Only Linux board
+ ports in arch/powerpc with bootwrapper support, which recalculate the
+ memory size from the SDRAM controller setup, will have to get fixed
+ in Linux additionally.
+
+ This patch enables this config option on some PPC440EPx boards as a workaround
+ for the CHIP 11 errata. Here the description from the AMCC documentation:
+
+ CHIP_11: End of memory range area restricted access.
+ Category: 3
+
+ Overview:
+ The 440EPx DDR controller does not acknowledge any
+ transaction which is determined to be crossing over the
+ end-of-memory-range boundary, even if the starting address is
+ within valid memory space. Any such transaction from any PLB4
+ master will result in a PLB time-out on PLB4 bus.
+
+ Impact:
+ In case of such misaligned bursts, PLB4 masters will not
+ retrieve any data at all, just the available data up to the
+ end of memory, especially the 440 CPU. For example, if a CPU
+ instruction required an operand located in memory within the
+ last 7 words of memory, the DCU master would burst read 8
+ words to update the data cache and cross over the
+ end-of-memory-range boundary. Such a DCU read would not be
+ answered by the DDR controller, resulting in a PLB4 time-out
+ and ultimately in a Machine Check interrupt. The data would
+ be inaccessible to the CPU.
+
+ Workaround:
+ Forbid any application to access the last 256 bytes of DDR
+ memory. For example, make your operating system believe that
+ the last 256 bytes of DDR memory are absent. AMCC has a patch
+ that does this, available for Linux.
+
+ This patch sets CFG_MEM_TOP_HIDE for the following 440EPx boards:
+ lwmon5, korat, sequoia
+
+ The other remaining 440EPx board were intentionally not included
+ since it is not clear to me, if they use the end of ram for some
+ other purpose. This is unclear, since these boards have CONFIG_PRAM
+ defined and even comments like this:
+
+ PMC440.h:
+ /* esd expects pram at end of physical memory.
+ * So no logbuffer at the moment.
+ */
+
+ It is strongly recommended to not use the last 256 bytes on those
+ boards too. Patches from the board maintainers are welcome.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c664bf8c3c9bb9e236891f0d8dfda883e86d159b
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Mar 27 10:09:05 2008 +0100
+
+ ppc4xx: Fix Canyonlands linker script (remove bogus ASSERT)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d56a3ce179688cde61073a3690e21703d68fafd7
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Mar 25 17:51:13 2008 +0100
+
+ ppc4xx: Correctly pass phyiscal FLASH base address into dtb
+
+ The routine ft_board_setup() configures the EBC NOR mappings for the
+ Linux physmap_of driver. Since on 460EX/GT we remap the FLASH from
+ 0x4.fc00.0000 to 0x4.cc00.0000 because of the max. 16MByte boot-CS
+ problem, we need to pass the corrected address here too.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9ad31989de12ce5c67b07c4867ead47465655c4b
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 19 16:35:12 2008 +0100
+
+ ppc4xx: Fix compilation warning in 4xx_enet.c
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4c9e855734c523900322a7c3cdd9099b4f51b51d
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 19 16:20:49 2008 +0100
+
+ ppc4xx: Add AMCC Glacier 406GT eval board support
+
+ This patch adds support for the AMCC Glacier 460GT eval board.
+ The main difference to the Canyonlands board are listed here:
+
+ - 4 ethernet ports instead of 2
+ - no SATA port
+ - no USB port
+
+ Currently EMAC2+3 are not working. This will be fixed in a later
+ release.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d8bd643141af4710d7f1b69bbab6b760de0af0a1
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Mar 27 08:47:26 2008 +0100
+
+ ppc4xx: Mask 'vec' with 0x1f in uic_interrupt() for bit set/clear
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b9670dd85be6e0496ef2e231043c23cad9b1d903
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Wed Mar 26 21:05:43 2008 +0100
+
+ Fix out of tree building issue
+
+ Currently U-Boot building in some external directory
+ doesn't work. This patch tries to fix the problem.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit d4ee711d8a5c366ee3f857c26b927d12e66614ff
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Wed Mar 26 18:13:33 2008 +0100
+
+ README: update documentation (availability, links, etc.)
+
+ Fix typo in README
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit e813eae3bfeba9c0bda9d1bf9fc3d081f790972f
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Wed Mar 26 17:47:44 2008 +0100
+
+ Fix compilation error in cmd_usb.c
+
+ This patch fixes compilation error
+ cmd_usb.c: In function 'do_usb':
+ cmd_usb.c:552: error: void value not ignored as it ought to be
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit d8c82db482d6b535d12b419d6440b88bf7091c9b
+Author: Timur Tabi <timur@freescale.com>
+Date: Fri Mar 14 17:45:29 2008 -0500
+
+ Add support for setting the I2C bus speed in fsl_i2c.c
+
+ Add support to the Freescale I2C driver (fsl_i2c.c) for setting and querying
+ the I2C bus speed. Current 8[356]xx boards define the CFG_I2C_SPEED macro,
+ but fsl_i2c.c ignores it and uses conservative value when programming the
+ I2C bus speed.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Acked-by: Andy Fleming <afleming@freescale.com>
+
+commit d049cc7f71c0d875e8f5099d1ed23666a82b8f8e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Mar 27 00:03:57 2008 +0100
+
+ Coding style cleanup, update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit fd0b1fe3c388a77e8fe00cdd930ca317a91198d4
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Mar 26 22:55:32 2008 +0800
+
+ drivers: add the support for Freescale SATA controller
+
+ Add the Freescale on-chip SATA controller driver to u-boot,
+ The SATA controller is used on the 837x and 8315 targets,
+ The driver can be used to load kernel, fs and dtb.
+
+ The features list:
+ - 1.5/3 Gbps link speed
+ - LBA48, LBA28 support
+ - DMA and FPDMA support
+ - Two ports support
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit bede87f4c87c3ccd868cc60ebf792e0560c6d024
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Mar 26 22:54:44 2008 +0800
+
+ ata: add the readme for SATA command line
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit cd54081cd479e542fc399b8a40651ff11a1ad849
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Mar 26 22:53:24 2008 +0800
+
+ ata: enable the sata initialize on boot up
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 69386383c5c2b323c66495b0b0cef6a9714d83bf
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Mar 26 22:52:36 2008 +0800
+
+ ata: add the fis struct for SATA
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit ffc664e80dfb2e17de0df5ad39e91a02e9c361bc
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Mar 26 22:51:44 2008 +0800
+
+ ata: add the libata support
+
+ add simple libata support in u-boot
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 8e9bb43429e50df55fa41932cbe65841ff579220
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Mar 26 22:50:45 2008 +0800
+
+ ata: make the ata_piix driver using new SATA framework
+
+ original ata_piix driver is using IDE framework, not real
+ SATA framework. For now, the ata_piix driver is only used
+ by x86 sc520_cdp board. This patch makes the ata_piix driver
+ use the new SATA framework, so
+
+ - remove the duplicated command stuff
+ - remove the CONFIG_CMD_IDE define in the sc520_cdp.h
+ - add the CONFIG_CMD_SATA define to sc520_cdp.h
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit c7057b529c3c3cb9c0ac9060686a4068f1491bbe
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Mar 26 22:49:44 2008 +0800
+
+ ata: add the support for SATA framework
+
+ - add the SATA framework
+ - add the SATA command line
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 83c7f470a4ce94f33600f11ae85ce4dcf00aa90c
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Mar 26 22:48:18 2008 +0800
+
+ ata: merge the header of ata_piix driver
+
+ move the sata.h from include/ to drivers/block/ata_piix.h
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 9eef62804d9695425b24c87b46a61a7fa74afee0
+Author: Dave Liu <r63238@freescale.com>
+Date: Wed Mar 26 22:47:06 2008 +0800
+
+ ata: merge the ata_piix driver
+
+ move the cmd_sata.c from common/ to drivers/ata_piix.c,
+ the cmd_sata.c have some part of ata_piix controller drivers.
+ consolidate the driver to have better framework.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit b9e749e95354f33eb5dc6653c6db7d502adb95fe
+Author: Markus Klotzbuecher <mk@denx.de>
+Date: Wed Mar 26 18:26:43 2008 +0100
+
+ USB, Storage: fix a bug introduced in commit
+ f6b44e0e4d18fe507833a0f76d24a9aa72c123f1 that will cause usb_stor_info
+ to only print only information on one storage device, but not for
+ multiple.
+
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit 841e5edd1623f3fecb6bffc5c2f938ed7a947360
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Wed Mar 26 17:47:44 2008 +0100
+
+ Fix compilation error in cmd_usb.c
+
+ This patch fixes compilation error
+ cmd_usb.c: In function 'do_usb':
+ cmd_usb.c:552: error: void value not ignored as it ought to be
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+
+commit dd6c910aadf27c822f17b87eae1a9bd0b2e3aa15
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Mar 26 08:53:53 2008 -0500
+
+ 85xx: Add cpu_mp_lmb_reserve helper to reserve boot page
+
+ Provide a board_lmb_reserve helper function to ensure we reserve
+ the page of memory we are using for the boot page translation code.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 79679d80021ab095e639e250ca472fe526da02e2
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Mar 26 08:34:25 2008 -0500
+
+ 85xx: Update multicore boot mechanism to ePAPR v0.81 spec
+
+ The following changes are needed to be inline with ePAPR v0.81:
+
+ * r4, r5 and now always set to 0 on boot release
+ * r7 is used to pass the size of the initial map area (IMA)
+ * EPAPR_MAGIC value changed for book-e processors
+ * changes in the spin table layout
+ * spin table supports a 64-bit physical release address
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 25eedb2c1958a13110c7de1fc809b624053cc69c
+Author: Jon Loeliger <jdl@freescale.com>
+Date: Wed Mar 19 15:02:07 2008 -0500
+
+ FSL: Clean up board/freescale/common/Makefile
+
+ Each file that can be built here now follows some
+ CONFIG_ option so that they are appropriately built
+ or not, as needed. And CONFIG_ defines were added
+ to various board config files to make sure that happens.
+
+ The other board/freescale/*/Makefiles no longer need
+ to reach up and over into ../common to build their
+ individually needed files any more.
+
+ Boards that are CDS specific were renamed with cds_ prefix.
+
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit a5af4b358a7caa9c0aa374d4d894bf762ec37669
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Feb 27 22:00:27 2008 -0600
+
+ 85xx: Fix merge duplication
+
+ ft_fixup_cpu() got duplicated in some merge snafu. Remove the duplicate.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 5893b3d0a4084f87a06a5d3dc03db91206818941
+Author: James Yang <James.Yang@freescale.com>
+Date: Tue Feb 12 16:35:07 2008 -0600
+
+ 85xx: Expand CCSR space with more DDR controller registers.
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Signed-off-by: Jon Loeliger <jdl@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a3e77fa5359b3f9f59e4e946b46d57a53057cc85
+Author: James Yang <James.Yang@freescale.com>
+Date: Fri Feb 8 18:05:08 2008 -0600
+
+ 85xx: Speed up get_ddr_freq() and get_bus_freq()
+
+ get_ddr_freq() and get_bus_freq() used get_sys_info() each time they were
+ called. However, get_sys_info() recalculates extraneous information when
+ called each time. Have get_ddr_freq() and get_bus_freq() return memoized
+ values from global_data instead.
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e9ea679918fbc9a53fa2f2a904aac874ea736036
+Author: James Yang <James.Yang@freescale.com>
+Date: Fri Feb 8 16:46:27 2008 -0600
+
+ 85xx: Show DDR memory data rate in addition to the memory clock frequency.
+
+ Show the DDR memory data rate in addition to the memory clock
+ frequency. For DDR/DDR2 memories the memory data rate is 2x the
+ memory clock.
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 591933ca6eabc440e6ed6967233aaf56fce464a3
+Author: James Yang <James.Yang@freescale.com>
+Date: Fri Feb 8 16:44:53 2008 -0600
+
+ 85xx: get_tbclk() speed up and rounding fix
+
+ Speed up get_tbclk() by referencing pre-computed bus clock
+ frequency value from global data instead of sys_info_t. Fix
+ rounding of result to nearest; previously it was rounding
+ upwards.
+
+ Signed-off-by: James Yang <James.Yang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Feb 6 01:19:40 2008 -0600
+
+ Update SVR numbers to expand support
+
+ FSL has taken to using SVR[16:23] as an SOC sub-version field. This
+ is used to distinguish certain variants within an SOC family. To
+ account for this, we add the SVR_SOC_VER() macro, and update the SVR_*
+ constants to reflect the larger value. We also add SVR numbers for all
+ of the current variants. Finally, to make things neater, rather than
+ use an enormous switch statement to print out the CPU type, we create
+ and array of SVR/name pairs (using a macro), and print out the CPU name
+ that matches the SVR SOC version.
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit b83eef440cf3cef816172ccbb5897ccd8e403cf3
+Author: Andy Fleming <afleming@freescale.com>
+Date: Wed Feb 6 01:12:57 2008 -0600
+
+ Add the Freescale PCI device IDs
+
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 7aff0c051ad0613171cf2b9941ee48675c62e7cd
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Feb 14 11:04:23 2008 -0600
+
+ 85xx: Added support for multicore boot mechanism
+
+ Added the cpu command that provides a generic mechanism to get status,
+ reset, and release secondary cores in multicore processors.
+
+ Added support for using the ePAPR defined spin-table mechanism on 85xx.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit ec2b74ffd36f02c6123725e7c2533dd2deaf4b64
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Jan 17 16:48:33 2008 -0600
+
+ 85xx: Added support for multicore boot mechanism
+
+ Added the cpu command that provides a generic mechanism to get status,
+ reset, and release secondary cores in multicore processors.
+
+ Added support for using the ePAPR defined spin-table mechanism on 85xx.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f69766e4b5d47ecd3aa58677a8da875694f364f2
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Jan 30 14:55:14 2008 -0600
+
+ 85xx: Add the concept of CFG_CCSRBAR_PHYS
+
+ When we go to 36-bit physical addresses we need to keep the concept of
+ the physical CCSRBAR address seperate from the virtual one.
+
+ For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 5b5eb9ca5b778f763bcf332697b35cc1e747626e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Mar 26 15:38:47 2008 +0100
+
+ Coding style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit da8808df7a9cef5a3d2ee286ef9ebf9de1780660
+Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+Date: Wed Mar 26 13:02:13 2008 +0100
+
+ Add CFG_RTC_DS1337_NOOSC to turn off OSC output
+
+ The default settings for RTC DS1337 keeps the OSC
+ output, 32,768 Hz, on. This add CFG_RTC_DS1337_NOOSC to
+ turn it off.
+
+ Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+
+commit 438a4c11260b4ea9805039b0b4f92f9df5306b02
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Mar 26 11:48:46 2008 +0100
+
+ Cleanup coding style, update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
commit 218ca724c08ca8a649f0917cf201cf23d4b33f39
Author: Wolfgang Denk <wd@denx.de>
Date: Wed Mar 26 10:40:12 2008 +0100
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+commit 3a5d1e7f1309998791702b2a559e3126781746b9
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Tue Mar 18 13:33:30 2008 +0100
+
+ lwmon5: Fix register test logic to match the specific GDC h/w.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 0f855a1f056a8c22116a2103a3900cbfb669df0b
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Tue Mar 18 13:27:57 2008 +0100
+
+ Fix backlight in the lwmon5 POST.
+
+ Backlight was switcehd on even when temperature was too low.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 2d991958b1e420fbfe17b128bd26ade74be5efcc
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Wed Feb 6 18:48:36 2008 +0100
+
+ The patch introduces the alternative configuration of the log buffer for
+ the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory),
+ the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ...,
+ PPC440EPX_GPT0_COMP5).
+
+ To enable this, alternative, configuration the U-Boot board configuration
+ file for lwmon5 includes the definitions of alternative addresses for header
+ (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).
+
+ The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
+ and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
+ lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).
+
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit ff818b21b069f4bc9cb73373cc5a16014be101b7
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 17:11:53 2008 +0100
+
+ Add support for the lwmon5 board reset via GPIO58.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 603f194e5ad81bb2ef42d6d8aaa74de175bcb411
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 17:09:55 2008 +0100
+
+ Some fixes to dspic, fpga, and gdc post tests for lwmon5.
+ Disable external watch-dog for now.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit e262efe35742c1ad4b0966ff501efc26f34a0aec
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 14:11:03 2008 +0100
+
+ The patch introduces the CRITICAL feature of POST tests. If the test
+ marked as POST_CRITICAL fails then the alternative, post_critical,
+ boot-command is used. If this command is not defined then U-Boot
+ enters into interactive mode.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 65b20dcefc89618193fa51947968dada91e4c778
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 14:10:42 2008 +0100
+
+ The patch adds new POST tests for the Lwmon5 board.
+ These are:
+
+ * External Watchdog test;
+ * dsPIC tests;
+ * FPGA test;
+ * GDC test;
+ * Sysmon tests.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+ Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
+
+commit 8dc3b2303d2b57c774b609ca0e7043ed8f9b88c1
+Author: Yuri Tikhonov <yur@pollux.denx.de>
+Date: Mon Feb 4 14:10:01 2008 +0100
+
+ Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
+
+ Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
+
commit 3515fd18d4e8e44f863ac7142b55e22b109e9af2
Author: Wolfgang Denk <wd@denx.de>
Date: Tue Mar 18 17:35:51 2008 +0100