projects
/
oweals
/
openwrt.git
/ blobdiff
commit
grep
author
committer
pickaxe
?
search:
re
summary
|
shortlog
|
log
|
commit
|
commitdiff
|
tree
raw
|
inline
| side by side
ath79: TP-Link Archer C7 v4 swap usb port leds
[oweals/openwrt.git]
/
target
/
linux
/
ath79
/
dts
/
ar9331_embeddedwireless_dorin.dts
diff --git
a/target/linux/ath79/dts/ar9331_embeddedwireless_dorin.dts
b/target/linux/ath79/dts/ar9331_embeddedwireless_dorin.dts
index 4b204b7561c07f6d9f7d1867a0847006f8f9d7b7..43bec35fa2860fe4d52880ad24ff7c56f5060a0a 100644
(file)
--- a/
target/linux/ath79/dts/ar9331_embeddedwireless_dorin.dts
+++ b/
target/linux/ath79/dts/ar9331_embeddedwireless_dorin.dts
@@
-11,28
+11,24
@@
compatible = "embeddedwireless,dorin", "qca,ar9331";
aliases {
compatible = "embeddedwireless,dorin", "qca,ar9331";
aliases {
+ led-boot = &status;
+ led-failsafe = &status;
+ led-running = &status;
+ led-upgrade = &status;
serial0 = &uart;
};
serial0 = &uart;
};
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x4000000>;
- };
-
leds {
compatible = "gpio-leds";
leds {
compatible = "gpio-leds";
- status {
+ status
: status
{
label = "dorin:green:status";
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
label = "dorin:green:status";
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
- default-state = "off";
};
};
keys {
compatible = "gpio-keys-polled";
};
};
keys {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <100>;
wps {
poll-interval = <100>;
wps {
@@
-70,9
+66,7
@@
num-chipselects = <1>;
status = "okay";
num-chipselects = <1>;
status = "okay";
- spiflash {
- #address-cells = <1>;
- #size-cells = <1>;
+ flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <104000000>;
reg = <0>;
compatible = "jedec,spi-nor";
spi-max-frequency = <104000000>;
reg = <0>;
@@
-94,6
+88,7
@@
};
partition@2 {
};
partition@2 {
+ compatible = "denx,uimage";
label = "firmware";
reg = <0x050000 0xfa0000>;
};
label = "firmware";
reg = <0x050000 0xfa0000>;
};
@@
-111,20
+106,16
@@
status = "okay";
mtd-mac-address = <&art 0x1002>;
status = "okay";
mtd-mac-address = <&art 0x1002>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-
- gmac-config {
- device = <&gmac>;
-
- switch-phy-addr-swap = <1>;
- switch-phy-swap = <1>;
- };
+ mtd-mac-address-increment-byte = <3>;
+ mtd-mac-address-increment = <0x40>;
};
&mdio1 {
status = "okay";
};
};
&mdio1 {
status = "okay";
};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x1002>;
+};