+ /*
+ * For a client, this contains the list of supported protocols in wire
+ * format.
+ */
+ unsigned char *alpn_client_proto_list;
+ unsigned alpn_client_proto_list_len;
+
+ /* SRTP profiles we are willing to do from RFC 5764 */
+ STACK_OF(SRTP_PROTECTION_PROFILE) *srtp_profiles;
+# endif
+ /*
+ * Callback for disabling session caching and ticket support on a session
+ * basis, depending on the chosen cipher.
+ */
+ int (*not_resumable_session_cb) (SSL *ssl, int is_forward_secure);
+# ifndef OPENSSL_NO_EC
+ /* EC extension values inherited by SSL structure */
+ size_t tlsext_ecpointformatlist_length;
+ unsigned char *tlsext_ecpointformatlist;
+ size_t tlsext_ellipticcurvelist_length;
+ unsigned char *tlsext_ellipticcurvelist;
+# endif /* OPENSSL_NO_EC */
+};
+
+
+struct ssl_st {
+ /*
+ * protocol version (one of SSL2_VERSION, SSL3_VERSION, TLS1_VERSION,
+ * DTLS1_VERSION)
+ */
+ int version;
+ /* SSL_ST_CONNECT or SSL_ST_ACCEPT */
+ int type;
+ /* SSLv3 */
+ const SSL_METHOD *method;
+ /*
+ * There are 2 BIO's even though they are normally both the same. This
+ * is so data can be read and written to different handlers
+ */
+ /* used by SSL_read */
+ BIO *rbio;
+ /* used by SSL_write */
+ BIO *wbio;
+ /* used during session-id reuse to concatenate messages */
+ BIO *bbio;
+ /*
+ * This holds a variable that indicates what we were doing when a 0 or -1
+ * is returned. This is needed for non-blocking IO so we know what
+ * request needs re-doing when in SSL_accept or SSL_connect
+ */
+ int rwstate;
+ /* true when we are actually in SSL_accept() or SSL_connect() */
+ int in_handshake;
+ int (*handshake_func) (SSL *);
+ /*
+ * Imagine that here's a boolean member "init" that is switched as soon
+ * as SSL_set_{accept/connect}_state is called for the first time, so
+ * that "state" and "handshake_func" are properly initialized. But as
+ * handshake_func is == 0 until then, we use this test instead of an
+ * "init" member.
+ */
+ /* are we the server side? - mostly used by SSL_clear */
+ int server;
+ /*
+ * Generate a new session or reuse an old one.
+ * NB: For servers, the 'new' session may actually be a previously
+ * cached session or even the previous session unless
+ * SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION is set
+ */
+ int new_session;
+ /* don't send shutdown packets */
+ int quiet_shutdown;
+ /* we have shut things down, 0x01 sent, 0x02 for received */
+ int shutdown;
+ /* where we are */
+ int state;
+ BUF_MEM *init_buf; /* buffer used during init */
+ void *init_msg; /* pointer to handshake message body, set by
+ * ssl3_get_message() */
+ int init_num; /* amount read/written */
+ int init_off; /* amount read/written */
+
+ struct ssl3_state_st *s3; /* SSLv3 variables */
+ struct dtls1_state_st *d1; /* DTLSv1 variables */
+
+ /* callback that allows applications to peek at protocol messages */
+ void (*msg_callback) (int write_p, int version, int content_type,
+ const void *buf, size_t len, SSL *ssl, void *arg);
+ void *msg_callback_arg;
+ int hit; /* reusing a previous session */
+ X509_VERIFY_PARAM *param;
+ /* crypto */
+ STACK_OF(SSL_CIPHER) *cipher_list;
+ STACK_OF(SSL_CIPHER) *cipher_list_by_id;
+ /*
+ * These are the ones being used, the ones in SSL_SESSION are the ones to
+ * be 'copied' into these ones
+ */
+ int mac_flags;
+ EVP_CIPHER_CTX *enc_read_ctx; /* cryptographic state */
+ EVP_MD_CTX *read_hash; /* used for mac generation */
+# ifndef OPENSSL_NO_COMP
+ COMP_CTX *expand; /* uncompress */
+# else
+ char *expand;
+# endif
+ EVP_CIPHER_CTX *enc_write_ctx; /* cryptographic state */
+ EVP_MD_CTX *write_hash; /* used for mac generation */
+# ifndef OPENSSL_NO_COMP
+ COMP_CTX *compress; /* compression */
+# else
+ char *compress;
+# endif
+ /* session info */
+ /* client cert? */
+ /* This is used to hold the server certificate used */
+ struct cert_st /* CERT */ *cert;
+ /*
+ * the session_id_context is used to ensure sessions are only reused in
+ * the appropriate context
+ */
+ unsigned int sid_ctx_length;
+ unsigned char sid_ctx[SSL_MAX_SID_CTX_LENGTH];
+ /* This can also be in the session once a session is established */
+ SSL_SESSION *session;
+ /* Default generate session ID callback. */
+ GEN_SESSION_CB generate_session_id;
+ /* Used in SSL3 */
+ /*
+ * 0 don't care about verify failure.
+ * 1 fail if verify fails
+ */
+ int verify_mode;
+ /* fail if callback returns 0 */
+ int (*verify_callback) (int ok, X509_STORE_CTX *ctx);
+ /* optional informational callback */
+ void (*info_callback) (const SSL *ssl, int type, int val);
+ /* error bytes to be written */
+ int error;
+ /* actual code */
+ int error_code;
+# ifndef OPENSSL_NO_KRB5
+ /* Kerberos 5 context */
+ KSSL_CTX *kssl_ctx;
+# endif /* OPENSSL_NO_KRB5 */
+# ifndef OPENSSL_NO_PSK
+ unsigned int (*psk_client_callback) (SSL *ssl, const char *hint,
+ char *identity,
+ unsigned int max_identity_len,
+ unsigned char *psk,
+ unsigned int max_psk_len);
+ unsigned int (*psk_server_callback) (SSL *ssl, const char *identity,
+ unsigned char *psk,
+ unsigned int max_psk_len);
+# endif
+ SSL_CTX *ctx;
+ /*
+ * set this flag to 1 and a sleep(1) is put into all SSL_read() and
+ * SSL_write() calls, good for nbio debuging :-)
+ */
+ int debug;
+ /* extra application data */
+ long verify_result;
+ CRYPTO_EX_DATA ex_data;
+ /* for server side, keep the list of CA_dn we can use */
+ STACK_OF(X509_NAME) *client_CA;
+ int references;
+ /* protocol behaviour */
+ unsigned long options;
+ /* API behaviour */
+ unsigned long mode;
+ long max_cert_list;
+ int first_packet;
+ /* what was passed, used for SSLv3/TLS rollback check */
+ int client_version;
+ unsigned int max_send_fragment;
+# ifndef OPENSSL_NO_TLSEXT
+ /* TLS extension debug callback */
+ void (*tlsext_debug_cb) (SSL *s, int client_server, int type,
+ unsigned char *data, int len, void *arg);
+ void *tlsext_debug_arg;
+ char *tlsext_hostname;
+ /*-
+ * no further mod of servername
+ * 0 : call the servername extension callback.
+ * 1 : prepare 2, allow last ack just after in server callback.
+ * 2 : don't call servername callback, no ack in server hello
+ */
+ int servername_done;
+ /* certificate status request info */
+ /* Status type or -1 if no status type */
+ int tlsext_status_type;
+ /* Expect OCSP CertificateStatus message */
+ int tlsext_status_expected;
+ /* OCSP status request only */
+ STACK_OF(OCSP_RESPID) *tlsext_ocsp_ids;
+ X509_EXTENSIONS *tlsext_ocsp_exts;
+ /* OCSP response received or to be sent */
+ unsigned char *tlsext_ocsp_resp;
+ int tlsext_ocsp_resplen;
+ /* RFC4507 session ticket expected to be received or sent */
+ int tlsext_ticket_expected;
+# ifndef OPENSSL_NO_EC
+ size_t tlsext_ecpointformatlist_length;
+ /* our list */
+ unsigned char *tlsext_ecpointformatlist;
+ size_t tlsext_ellipticcurvelist_length;
+ /* our list */
+ unsigned char *tlsext_ellipticcurvelist;
+# endif /* OPENSSL_NO_EC */
+ /* TLS Session Ticket extension override */
+ TLS_SESSION_TICKET_EXT *tlsext_session_ticket;
+ /* TLS Session Ticket extension callback */
+ tls_session_ticket_ext_cb_fn tls_session_ticket_ext_cb;
+ void *tls_session_ticket_ext_cb_arg;
+ /* TLS pre-shared secret session resumption */
+ tls_session_secret_cb_fn tls_session_secret_cb;
+ void *tls_session_secret_cb_arg;
+ SSL_CTX *initial_ctx; /* initial ctx, used to store sessions */
+# ifndef OPENSSL_NO_NEXTPROTONEG
+ /*
+ * Next protocol negotiation. For the client, this is the protocol that
+ * we sent in NextProtocol and is set when handling ServerHello
+ * extensions. For a server, this is the client's selected_protocol from
+ * NextProtocol and is set when handling the NextProtocol message, before
+ * the Finished message.
+ */
+ unsigned char *next_proto_negotiated;
+ unsigned char next_proto_negotiated_len;
+# endif
+# define session_ctx initial_ctx
+ /* What we'll do */
+ STACK_OF(SRTP_PROTECTION_PROFILE) *srtp_profiles;
+ /* What's been chosen */
+ SRTP_PROTECTION_PROFILE *srtp_profile;
+ /*-
+ * Is use of the Heartbeat extension negotiated?
+ * 0: disabled
+ * 1: enabled
+ * 2: enabled, but not allowed to send Requests
+ */
+ unsigned int tlsext_heartbeat;
+ /* Indicates if a HeartbeatRequest is in flight */
+ unsigned int tlsext_hb_pending;
+ /* HeartbeatRequest sequence number */
+ unsigned int tlsext_hb_seq;
+ /*
+ * For a client, this contains the list of supported protocols in wire
+ * format.
+ */
+ unsigned char *alpn_client_proto_list;
+ unsigned alpn_client_proto_list_len;
+# else
+# define session_ctx ctx
+# endif /* OPENSSL_NO_TLSEXT */
+ /*-
+ * 1 if we are renegotiating.
+ * 2 if we are a server and are inside a handshake
+ * (i.e. not just sending a HelloRequest)
+ */
+ int renegotiate;
+# ifndef OPENSSL_NO_SRP
+ /* ctx for SRP authentication */
+ SRP_CTX srp_ctx;
+# endif
+ /*
+ * Callback for disabling session caching and ticket support on a session
+ * basis, depending on the chosen cipher.
+ */
+ int (*not_resumable_session_cb) (SSL *ssl, int is_forward_secure);
+
+ RECORD_LAYER rlayer;
+};
+
+
+typedef struct ssl3_state_st {
+ long flags;
+ int delay_buf_pop_ret;
+ int read_mac_secret_size;
+ unsigned char read_mac_secret[EVP_MAX_MD_SIZE];
+ int write_mac_secret_size;
+ unsigned char write_mac_secret[EVP_MAX_MD_SIZE];
+ unsigned char server_random[SSL3_RANDOM_SIZE];
+ unsigned char client_random[SSL3_RANDOM_SIZE];
+ /* flags for countermeasure against known-IV weakness */
+ int need_empty_fragments;
+ int empty_fragment_done;
+ /* The value of 'extra' when the buffers were initialized */
+ int init_extra;
+ /* used during startup, digest all incoming/outgoing packets */
+ BIO *handshake_buffer;
+ /*
+ * When set of handshake digests is determined, buffer is hashed and
+ * freed and MD_CTX-es for all required digests are stored in this array
+ */
+ EVP_MD_CTX **handshake_dgst;
+ /*
+ * Set whenever an expected ChangeCipherSpec message is processed.
+ * Unset when the peer's Finished message is received.
+ * Unexpected ChangeCipherSpec messages trigger a fatal alert.
+ */
+ int change_cipher_spec;
+ int warn_alert;
+ int fatal_alert;
+ /*
+ * we allow one fatal and one warning alert to be outstanding, send close
+ * alert via the warning alert
+ */
+ int alert_dispatch;
+ unsigned char send_alert[2];
+ /*
+ * This flag is set when we should renegotiate ASAP, basically when there
+ * is no more data in the read or write buffers
+ */
+ int renegotiate;
+ int total_renegotiations;
+ int num_renegotiations;
+ int in_read_app_data;
+ struct {
+ /* actually only needs to be 16+20 */
+ unsigned char cert_verify_md[EVP_MAX_MD_SIZE * 2];
+ /* actually only need to be 16+20 for SSLv3 and 12 for TLS */
+ unsigned char finish_md[EVP_MAX_MD_SIZE * 2];
+ int finish_md_len;
+ unsigned char peer_finish_md[EVP_MAX_MD_SIZE * 2];
+ int peer_finish_md_len;
+ unsigned long message_size;
+ int message_type;
+ /* used to hold the new cipher we are going to use */
+ const SSL_CIPHER *new_cipher;
+# ifndef OPENSSL_NO_DH
+ DH *dh;
+# endif
+# ifndef OPENSSL_NO_EC
+ EC_KEY *ecdh; /* holds short lived ECDH key */
+# endif
+ /* used when SSL_ST_FLUSH_DATA is entered */
+ int next_state;
+ int reuse_message;
+ /* used for certificate requests */
+ int cert_req;
+ int ctype_num;
+ char ctype[SSL3_CT_NUMBER];
+ STACK_OF(X509_NAME) *ca_names;
+ int use_rsa_tmp;
+ int key_block_length;
+ unsigned char *key_block;
+ const EVP_CIPHER *new_sym_enc;
+ const EVP_MD *new_hash;
+ int new_mac_pkey_type;
+ int new_mac_secret_size;
+# ifndef OPENSSL_NO_COMP
+ const SSL_COMP *new_compression;
+# else
+ char *new_compression;
+# endif
+ int cert_request;
+ } tmp;
+
+ /* Connection binding to prevent renegotiation attacks */
+ unsigned char previous_client_finished[EVP_MAX_MD_SIZE];
+ unsigned char previous_client_finished_len;
+ unsigned char previous_server_finished[EVP_MAX_MD_SIZE];
+ unsigned char previous_server_finished_len;
+ int send_connection_binding; /* TODOEKR */
+
+# ifndef OPENSSL_NO_NEXTPROTONEG
+ /*
+ * Set if we saw the Next Protocol Negotiation extension from our peer.
+ */
+ int next_proto_neg_seen;
+# endif
+
+# ifndef OPENSSL_NO_TLSEXT
+
+ /*
+ * ALPN information (we are in the process of transitioning from NPN to
+ * ALPN.)
+ */
+
+ /*
+ * In a server these point to the selected ALPN protocol after the
+ * ClientHello has been processed. In a client these contain the protocol
+ * that the server selected once the ServerHello has been processed.
+ */
+ unsigned char *alpn_selected;
+ unsigned alpn_selected_len;
+
+# ifndef OPENSSL_NO_EC
+ /*
+ * This is set to true if we believe that this is a version of Safari
+ * running on OS X 10.6 or newer. We wish to know this because Safari on
+ * 10.8 .. 10.8.3 has broken ECDHE-ECDSA support.
+ */
+ char is_probably_safari;
+# endif /* !OPENSSL_NO_EC */
+
+# endif /* !OPENSSL_NO_TLSEXT */
+} SSL3_STATE;
+
+
+/* DTLS structures */
+
+# ifndef OPENSSL_NO_SCTP
+# define DTLS1_SCTP_AUTH_LABEL "EXPORTER_DTLS_OVER_SCTP"
+# endif
+
+/* Max MTU overhead we know about so far is 40 for IPv6 + 8 for UDP */
+# define DTLS1_MAX_MTU_OVERHEAD 48
+
+struct dtls1_retransmit_state {
+ EVP_CIPHER_CTX *enc_write_ctx; /* cryptographic state */
+ EVP_MD_CTX *write_hash; /* used for mac generation */
+# ifndef OPENSSL_NO_COMP
+ COMP_CTX *compress; /* compression */
+# else
+ char *compress;
+# endif
+ SSL_SESSION *session;
+ unsigned short epoch;
+};
+
+struct hm_header_st {
+ unsigned char type;
+ unsigned long msg_len;
+ unsigned short seq;
+ unsigned long frag_off;
+ unsigned long frag_len;
+ unsigned int is_ccs;
+ struct dtls1_retransmit_state saved_retransmit_state;
+};
+
+struct ccs_header_st {
+ unsigned char type;
+ unsigned short seq;
+};
+
+struct dtls1_timeout_st {
+ /* Number of read timeouts so far */
+ unsigned int read_timeouts;
+ /* Number of write timeouts so far */
+ unsigned int write_timeouts;
+ /* Number of alerts received so far */
+ unsigned int num_alerts;
+};
+
+typedef struct hm_fragment_st {
+ struct hm_header_st msg_header;
+ unsigned char *fragment;
+ unsigned char *reassembly;
+} hm_fragment;
+
+typedef struct dtls1_state_st {
+ unsigned int send_cookie;
+ unsigned char cookie[DTLS1_COOKIE_LENGTH];
+ unsigned char rcvd_cookie[DTLS1_COOKIE_LENGTH];
+ unsigned int cookie_len;
+
+ /* handshake message numbers */
+ unsigned short handshake_write_seq;
+ unsigned short next_handshake_write_seq;
+ unsigned short handshake_read_seq;
+
+ /* Buffered handshake messages */
+ pqueue buffered_messages;
+ /* Buffered (sent) handshake records */
+ pqueue sent_messages;
+
+ /* Is set when listening for new connections with dtls1_listen() */
+ unsigned int listen;
+ unsigned int link_mtu; /* max on-the-wire DTLS packet size */
+ unsigned int mtu; /* max DTLS packet size */
+ struct hm_header_st w_msg_hdr;
+ struct hm_header_st r_msg_hdr;
+ struct dtls1_timeout_st timeout;
+ /*
+ * Indicates when the last handshake msg or heartbeat sent will timeout
+ */
+ struct timeval next_timeout;
+ /* Timeout duration */
+ unsigned short timeout_duration;
+
+ unsigned int retransmitting;
+ /*
+ * Set when the handshake is ready to process peer's ChangeCipherSpec message.
+ * Cleared after the message has been processed.
+ */
+ unsigned int change_cipher_spec_ok;
+# ifndef OPENSSL_NO_SCTP
+ /* used when SSL_ST_XX_FLUSH is entered */
+ int next_state;
+ int shutdown_received;
+# endif
+} DTLS1_STATE;
+
+
+
+# ifndef OPENSSL_NO_EC
+/*
+ * From ECC-TLS draft, used in encoding the curve type in ECParameters
+ */
+# define EXPLICIT_PRIME_CURVE_TYPE 1
+# define EXPLICIT_CHAR2_CURVE_TYPE 2
+# define NAMED_CURVE_TYPE 3
+# endif /* OPENSSL_NO_EC */
+
+typedef struct cert_pkey_st {
+ X509 *x509;
+ EVP_PKEY *privatekey;
+ /* Digest to use when signing */
+ const EVP_MD *digest;
+ /* Chain for this certificate */
+ STACK_OF(X509) *chain;
+# ifndef OPENSSL_NO_TLSEXT
+ /*-
+ * serverinfo data for this certificate. The data is in TLS Extension
+ * wire format, specifically it's a series of records like:
+ * uint16_t extension_type; // (RFC 5246, 7.4.1.4, Extension)
+ * uint16_t length;
+ * uint8_t data[length];
+ */
+ unsigned char *serverinfo;
+ size_t serverinfo_length;
+# endif
+ /*
+ * Set if CERT_PKEY can be used with current SSL session: e.g.
+ * appropriate curve, signature algorithms etc. If zero it can't be used
+ * at all.
+ */
+ int valid_flags;
+} CERT_PKEY;
+/* Retrieve Suite B flags */
+# define tls1_suiteb(s) (s->cert->cert_flags & SSL_CERT_FLAG_SUITEB_128_LOS)
+/* Uses to check strict mode: suite B modes are always strict */
+# define SSL_CERT_FLAGS_CHECK_TLS_STRICT \
+ (SSL_CERT_FLAG_SUITEB_128_LOS|SSL_CERT_FLAG_TLS_STRICT)
+
+typedef struct {
+ unsigned short ext_type;
+ /*
+ * Per-connection flags relating to this extension type: not used if
+ * part of an SSL_CTX structure.
+ */
+ unsigned short ext_flags;
+ custom_ext_add_cb add_cb;
+ custom_ext_free_cb free_cb;
+ void *add_arg;
+ custom_ext_parse_cb parse_cb;
+ void *parse_arg;
+} custom_ext_method;
+
+/* ext_flags values */
+
+/*
+ * Indicates an extension has been received. Used to check for unsolicited or
+ * duplicate extensions.
+ */
+# define SSL_EXT_FLAG_RECEIVED 0x1
+/*
+ * Indicates an extension has been sent: used to enable sending of
+ * corresponding ServerHello extension.
+ */
+# define SSL_EXT_FLAG_SENT 0x2
+
+typedef struct {
+ custom_ext_method *meths;
+ size_t meths_count;
+} custom_ext_methods;
+
+typedef struct cert_st {
+ /* Current active set */
+ /*
+ * ALWAYS points to an element of the pkeys array
+ * Probably it would make more sense to store
+ * an index, not a pointer.
+ */
+ CERT_PKEY *key;
+ /*
+ * For servers the following masks are for the key and auth algorithms
+ * that are supported by the certs below. For clients they are masks of
+ * *disabled* algorithms based on the current session.
+ */
+ int valid;
+ unsigned long mask_k;
+ unsigned long mask_a;
+ unsigned long export_mask_k;
+ unsigned long export_mask_a;
+ /* Client only */
+ unsigned long mask_ssl;
+# ifndef OPENSSL_NO_RSA
+ RSA *rsa_tmp;
+ RSA *(*rsa_tmp_cb) (SSL *ssl, int is_export, int keysize);
+# endif
+# ifndef OPENSSL_NO_DH
+ DH *dh_tmp;
+ DH *(*dh_tmp_cb) (SSL *ssl, int is_export, int keysize);
+ int dh_tmp_auto;
+# endif
+# ifndef OPENSSL_NO_EC
+ EC_KEY *ecdh_tmp;
+ /* Callback for generating ephemeral ECDH keys */
+ EC_KEY *(*ecdh_tmp_cb) (SSL *ssl, int is_export, int keysize);
+ /* Select ECDH parameters automatically */
+ int ecdh_tmp_auto;
+# endif
+ /* Flags related to certificates */
+ unsigned int cert_flags;
+ CERT_PKEY pkeys[SSL_PKEY_NUM];
+ /*
+ * Certificate types (received or sent) in certificate request message.
+ * On receive this is only set if number of certificate types exceeds
+ * SSL3_CT_NUMBER.
+ */
+ unsigned char *ctypes;
+ size_t ctype_num;
+ /* Temporary storage for premaster secret */
+ unsigned char *pms;
+ size_t pmslen;
+ /*
+ * signature algorithms peer reports: e.g. supported signature algorithms
+ * extension for server or as part of a certificate request for client.
+ */
+ unsigned char *peer_sigalgs;
+ /* Size of above array */
+ size_t peer_sigalgslen;
+ /*
+ * suppported signature algorithms. When set on a client this is sent in
+ * the client hello as the supported signature algorithms extension. For
+ * servers it represents the signature algorithms we are willing to use.
+ */
+ unsigned char *conf_sigalgs;
+ /* Size of above array */
+ size_t conf_sigalgslen;
+ /*
+ * Client authentication signature algorithms, if not set then uses
+ * conf_sigalgs. On servers these will be the signature algorithms sent
+ * to the client in a cerificate request for TLS 1.2. On a client this
+ * represents the signature algortithms we are willing to use for client
+ * authentication.
+ */
+ unsigned char *client_sigalgs;
+ /* Size of above array */
+ size_t client_sigalgslen;
+ /*
+ * Signature algorithms shared by client and server: cached because these
+ * are used most often.
+ */
+ TLS_SIGALGS *shared_sigalgs;
+ size_t shared_sigalgslen;
+ /*
+ * Certificate setup callback: if set is called whenever a certificate
+ * may be required (client or server). the callback can then examine any
+ * appropriate parameters and setup any certificates required. This
+ * allows advanced applications to select certificates on the fly: for
+ * example based on supported signature algorithms or curves.
+ */
+ int (*cert_cb) (SSL *ssl, void *arg);
+ void *cert_cb_arg;
+ /*
+ * Optional X509_STORE for chain building or certificate validation If
+ * NULL the parent SSL_CTX store is used instead.
+ */
+ X509_STORE *chain_store;
+ X509_STORE *verify_store;
+ /* Raw values of the cipher list from a client */
+ unsigned char *ciphers_raw;
+ size_t ciphers_rawlen;
+ /* Custom extension methods for server and client */
+ custom_ext_methods cli_ext;
+ custom_ext_methods srv_ext;
+ /* Security callback */
+ int (*sec_cb) (SSL *s, SSL_CTX *ctx, int op, int bits, int nid,
+ void *other, void *ex);
+ /* Security level */
+ int sec_level;
+ void *sec_ex;
+ int references; /* >1 only if SSL_copy_session_id is used */
+} CERT;
+
+typedef struct sess_cert_st {
+ STACK_OF(X509) *cert_chain; /* as received from peer */
+ /* The 'peer_...' members are used only by clients. */
+ int peer_cert_type;
+ CERT_PKEY *peer_key; /* points to an element of peer_pkeys (never
+ * NULL!) */
+ CERT_PKEY peer_pkeys[SSL_PKEY_NUM];
+ /*
+ * Obviously we don't have the private keys of these, so maybe we
+ * shouldn't even use the CERT_PKEY type here.
+ */
+# ifndef OPENSSL_NO_RSA
+ RSA *peer_rsa_tmp; /* not used for SSL 2 */
+# endif
+# ifndef OPENSSL_NO_DH
+ DH *peer_dh_tmp; /* not used for SSL 2 */
+# endif
+# ifndef OPENSSL_NO_EC
+ EC_KEY *peer_ecdh_tmp;
+# endif
+ int references; /* actually always 1 at the moment */
+} SESS_CERT;
+/* Structure containing decoded values of signature algorithms extension */
+struct tls_sigalgs_st {
+ /* NID of hash algorithm */
+ int hash_nid;
+ /* NID of signature algorithm */
+ int sign_nid;
+ /* Combined hash and signature NID */
+ int signandhash_nid;
+ /* Raw values used in extension */
+ unsigned char rsign;
+ unsigned char rhash;
+};
+
+/*
+ * #define MAC_DEBUG
+ */
+
+/*
+ * #define ERR_DEBUG
+ */
+/*
+ * #define ABORT_DEBUG
+ */
+/*
+ * #define PKT_DEBUG 1
+ */
+/*
+ * #define DES_DEBUG
+ */
+/*
+ * #define DES_OFB_DEBUG
+ */
+/*
+ * #define SSL_DEBUG
+ */
+/*
+ * #define RSA_DEBUG
+ */
+/*
+ * #define IDEA_DEBUG
+ */
+
+# define FP_ICC (int (*)(const void *,const void *))
+# define ssl_put_cipher_by_char(ssl,ciph,ptr) \
+ ((ssl)->method->put_cipher_by_char((ciph),(ptr)))
+
+/*
+ * This is for the SSLv3/TLSv1.0 differences in crypto/hash stuff It is a bit
+ * of a mess of functions, but hell, think of it as an opaque structure :-)
+ */
+typedef struct ssl3_enc_method {
+ int (*enc) (SSL *, int);
+ int (*mac) (SSL *, unsigned char *, int);
+ int (*setup_key_block) (SSL *);
+ int (*generate_master_secret) (SSL *, unsigned char *, unsigned char *,
+ int);
+ int (*change_cipher_state) (SSL *, int);
+ int (*final_finish_mac) (SSL *, const char *, int, unsigned char *);
+ int finish_mac_length;
+ int (*cert_verify_mac) (SSL *, int, unsigned char *);
+ const char *client_finished_label;
+ int client_finished_label_len;
+ const char *server_finished_label;
+ int server_finished_label_len;
+ int (*alert_value) (int);
+ int (*export_keying_material) (SSL *, unsigned char *, size_t,
+ const char *, size_t,
+ const unsigned char *, size_t,
+ int use_context);
+ /* Various flags indicating protocol version requirements */
+ unsigned int enc_flags;
+ /* Handshake header length */
+ unsigned int hhlen;
+ /* Set the handshake header */
+ int (*set_handshake_header) (SSL *s, int type, unsigned long len);
+ /* Write out handshake message */
+ int (*do_write) (SSL *s);
+} SSL3_ENC_METHOD;
+
+# define SSL_HM_HEADER_LENGTH(s) s->method->ssl3_enc->hhlen
+# define ssl_handshake_start(s) \
+ (((unsigned char *)s->init_buf->data) + s->method->ssl3_enc->hhlen)
+# define ssl_set_handshake_header(s, htype, len) \
+ s->method->ssl3_enc->set_handshake_header(s, htype, len)
+# define ssl_do_write(s) s->method->ssl3_enc->do_write(s)
+
+/* Values for enc_flags */
+
+/* Uses explicit IV for CBC mode */
+# define SSL_ENC_FLAG_EXPLICIT_IV 0x1
+/* Uses signature algorithms extension */
+# define SSL_ENC_FLAG_SIGALGS 0x2
+/* Uses SHA256 default PRF */
+# define SSL_ENC_FLAG_SHA256_PRF 0x4
+/* Is DTLS */
+# define SSL_ENC_FLAG_DTLS 0x8
+/*
+ * Allow TLS 1.2 ciphersuites: applies to DTLS 1.2 as well as TLS 1.2: may
+ * apply to others in future.
+ */
+# define SSL_ENC_FLAG_TLS1_2_CIPHERS 0x10
+
+# ifndef OPENSSL_NO_COMP
+/* Used for holding the relevant compression methods loaded into SSL_CTX */
+typedef struct ssl3_comp_st {
+ int comp_id; /* The identifier byte for this compression
+ * type */
+ char *name; /* Text name used for the compression type */
+ COMP_METHOD *method; /* The method :-) */
+} SSL3_COMP;
+# endif
+
+extern SSL3_ENC_METHOD ssl3_undef_enc_method;
+OPENSSL_EXTERN const SSL_CIPHER ssl3_ciphers[];