+
+#ifdef CONFIG_ASH_MATH_SUPPORT
+
+/* Copyright (c) 2001 Aaron Lehmann <aaronl@vitelus.com>
+
+ Permission is hereby granted, free of charge, to any person obtaining
+ a copy of this software and associated documentation files (the
+ "Software"), to deal in the Software without restriction, including
+ without limitation the rights to use, copy, modify, merge, publish,
+ distribute, sublicense, and/or sell copies of the Software, and to
+ permit persons to whom the Software is furnished to do so, subject to
+ the following conditions:
+
+ The above copyright notice and this permission notice shall be
+ included in all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+/* This is my infix parser/evaluator. It is optimized for size, intended
+ * as a replacement for yacc-based parsers. However, it may well be faster
+ * than a comparable parser written in yacc. The supported operators are
+ * listed in #defines below. Parens, order of operations, and error handling
+ * are supported. This code is thread safe. The exact expression format should
+ * be that which POSIX specifies for shells. */
+
+/* The code uses a simple two-stack algorithm. See
+ * http://www.onthenet.com.au/~grahamis/int2008/week02/lect02.html
+ * for a detailed explanation of the infix-to-postfix algorithm on which
+ * this is based (this code differs in that it applies operators immediately
+ * to the stack instead of adding them to a queue to end up with an
+ * expression). */
+
+/* To use the routine, call it with an expression string and error return
+ * pointer */
+
+/*
+ * Aug 24, 2001 Manuel Novoa III
+ *
+ * Reduced the generated code size by about 30% (i386) and fixed several bugs.
+ *
+ * 1) In arith_apply():
+ * a) Cached values of *numptr and &(numptr[-1]).
+ * b) Removed redundant test for zero denominator.
+ *
+ * 2) In arith():
+ * a) Eliminated redundant code for processing operator tokens by moving
+ * to a table-based implementation. Also folded handling of parens
+ * into the table.
+ * b) Combined all 3 loops which called arith_apply to reduce generated
+ * code size at the cost of speed.
+ *
+ * 3) The following expressions were treated as valid by the original code:
+ * 1() , 0! , 1 ( *3 ) .
+ * These bugs have been fixed by internally enclosing the expression in
+ * parens and then checking that all binary ops and right parens are
+ * preceded by a valid expression (NUM_TOKEN).
+ *
+ * Note: It may be desirable to replace Aaron's test for whitespace with
+ * ctype's isspace() if it is used by another busybox applet or if additional
+ * whitespace chars should be considered. Look below the "#include"s for a
+ * precompiler test.
+ */
+
+/*
+ * Aug 26, 2001 Manuel Novoa III
+ *
+ * Return 0 for null expressions. Pointed out by Vladimir Oleynik.
+ *
+ * Merge in Aaron's comments previously posted to the busybox list,
+ * modified slightly to take account of my changes to the code.
+ *
+ */
+
+/*
+ * (C) 2003 Vladimir Oleynik <dzo@simtreas.ru>
+ *
+ * - allow access to variable,
+ * used recursive find value indirection (c=2*2; a="c"; $((a+=2)) produce 6)
+ * - realize assign syntax (VAR=expr, +=, *= etc)
+ * - realize exponentiation (** operator)
+ * - realize comma separated - expr, expr
+ * - realise ++expr --expr expr++ expr--
+ * - realise expr ? expr : expr (but, second expr calculate always)
+ * - allow hexadecimal and octal numbers
+ * - was restored loses XOR operator
+ * - remove one goto label, added three ;-)
+ * - protect $((num num)) as true zero expr (Manuel`s error)
+ * - always use special isspace(), see comment from bash ;-)
+ */
+
+
+#define arith_isspace(arithval) \
+ (arithval == ' ' || arithval == '\n' || arithval == '\t')
+
+
+typedef unsigned char operator;
+
+/* An operator's token id is a bit of a bitfield. The lower 5 bits are the
+ * precedence, and 3 high bits are an ID unique across operators of that
+ * precedence. The ID portion is so that multiple operators can have the
+ * same precedence, ensuring that the leftmost one is evaluated first.
+ * Consider * and /. */
+
+#define tok_decl(prec,id) (((id)<<5)|(prec))
+#define PREC(op) ((op) & 0x1F)
+
+#define TOK_LPAREN tok_decl(0,0)
+
+#define TOK_COMMA tok_decl(1,0)
+
+#define TOK_ASSIGN tok_decl(2,0)
+#define TOK_AND_ASSIGN tok_decl(2,1)
+#define TOK_OR_ASSIGN tok_decl(2,2)
+#define TOK_XOR_ASSIGN tok_decl(2,3)
+#define TOK_PLUS_ASSIGN tok_decl(2,4)
+#define TOK_MINUS_ASSIGN tok_decl(2,5)
+#define TOK_LSHIFT_ASSIGN tok_decl(2,6)
+#define TOK_RSHIFT_ASSIGN tok_decl(2,7)
+
+#define TOK_MUL_ASSIGN tok_decl(3,0)
+#define TOK_DIV_ASSIGN tok_decl(3,1)
+#define TOK_REM_ASSIGN tok_decl(3,2)
+
+/* all assign is right associativity and precedence eq, but (7+3)<<5 > 256 */
+#define convert_prec_is_assing(prec) do { if(prec == 3) prec = 2; } while(0)
+
+/* conditional is right associativity too */
+#define TOK_CONDITIONAL tok_decl(4,0)
+#define TOK_CONDITIONAL_SEP tok_decl(4,1)
+
+#define TOK_OR tok_decl(5,0)
+
+#define TOK_AND tok_decl(6,0)
+
+#define TOK_BOR tok_decl(7,0)
+
+#define TOK_BXOR tok_decl(8,0)
+
+#define TOK_BAND tok_decl(9,0)
+
+#define TOK_EQ tok_decl(10,0)
+#define TOK_NE tok_decl(10,1)
+
+#define TOK_LT tok_decl(11,0)
+#define TOK_GT tok_decl(11,1)
+#define TOK_GE tok_decl(11,2)
+#define TOK_LE tok_decl(11,3)
+
+#define TOK_LSHIFT tok_decl(12,0)
+#define TOK_RSHIFT tok_decl(12,1)
+
+#define TOK_ADD tok_decl(13,0)
+#define TOK_SUB tok_decl(13,1)
+
+#define TOK_MUL tok_decl(14,0)
+#define TOK_DIV tok_decl(14,1)
+#define TOK_REM tok_decl(14,2)
+
+/* exponent is right associativity */
+#define TOK_EXPONENT tok_decl(15,1)
+
+/* For now unary operators. */
+#define UNARYPREC 16
+#define TOK_BNOT tok_decl(UNARYPREC,0)
+#define TOK_NOT tok_decl(UNARYPREC,1)
+
+#define TOK_UMINUS tok_decl(UNARYPREC+1,0)
+#define TOK_UPLUS tok_decl(UNARYPREC+1,1)
+
+#define PREC_PRE (UNARYPREC+2)
+
+#define TOK_PRE_INC tok_decl(PREC_PRE, 0)
+#define TOK_PRE_DEC tok_decl(PREC_PRE, 1)
+
+#define PREC_POST (UNARYPREC+3)
+
+#define TOK_POST_INC tok_decl(PREC_POST, 0)
+#define TOK_POST_DEC tok_decl(PREC_POST, 1)
+
+#define SPEC_PREC (UNARYPREC+4)
+
+#define TOK_NUM tok_decl(SPEC_PREC, 0)
+#define TOK_RPAREN tok_decl(SPEC_PREC, 1)
+
+#define NUMPTR (*numstackptr)
+
+static int tok_have_assign(operator op)
+{
+ operator prec = PREC(op);
+
+ convert_prec_is_assing(prec);
+ return (prec == PREC(TOK_ASSIGN) ||
+ prec == PREC_PRE || prec == PREC_POST);
+}
+
+static int is_right_associativity(operator prec)
+{
+ return (prec == PREC(TOK_ASSIGN) || prec == PREC(TOK_EXPONENT) ||
+ prec == PREC(TOK_CONDITIONAL));
+}
+
+
+typedef struct ARITCH_VAR_NUM {
+ arith_t val;
+ arith_t contidional_second_val;
+ char contidional_second_val_initialized;
+ char *var; /* if NULL then is regular number,
+ else is variable name */
+} v_n_t;
+
+
+typedef struct CHK_VAR_RECURSIVE_LOOPED {
+ const char *var;
+ struct CHK_VAR_RECURSIVE_LOOPED *next;
+} chk_var_recursive_looped_t;
+
+static chk_var_recursive_looped_t *prev_chk_var_recursive;
+
+
+static int arith_lookup_val(v_n_t *t)
+{
+ if(t->var) {
+ const char * p = lookupvar(t->var);
+
+ if(p) {
+ int errcode;
+
+ /* recursive try as expression */
+ chk_var_recursive_looped_t *cur;
+ chk_var_recursive_looped_t cur_save;
+
+ for(cur = prev_chk_var_recursive; cur; cur = cur->next) {
+ if(strcmp(cur->var, t->var) == 0) {
+ /* expression recursion loop detected */
+ return -5;