+define KernelPackage/bcma
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=BCMA support
+ DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx
+ KCONFIG:=\
+ CONFIG_BCMA \
+ CONFIG_BCMA_POSSIBLE=y \
+ CONFIG_BCMA_BLOCKIO=y \
+ CONFIG_BCMA_HOST_PCI_POSSIBLE=y \
+ CONFIG_BCMA_HOST_PCI=y \
+ CONFIG_BCMA_DRIVER_MIPS=n \
+ CONFIG_BCMA_DRIVER_PCI_HOSTMODE=n \
+ CONFIG_BCMA_DRIVER_GMAC_CMN=n \
+ CONFIG_BCMA_DEBUG=n
+ FILES:=$(LINUX_DIR)/drivers/bcma/bcma.ko
+ AUTOLOAD:=$(call AutoLoad,29,bcma)
+endef
+
+define KernelPackage/bcma/description
+ Bus driver for Broadcom specific Advanced Microcontroller Bus Architecture.
+endef
+
+$(eval $(call KernelPackage,bcma))
+
+
+define KernelPackage/wdt-omap
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=OMAP Watchdog timer
+ DEPENDS:=@(TARGET_omap24xx||TARGET_omap35xx)
+ KCONFIG:=CONFIG_OMAP_WATCHDOG
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/omap_wdt.ko
+ AUTOLOAD:=$(call AutoLoad,50,omap_wdt.ko)
+endef
+
+define KernelPackage/wdt-omap/description
+ Kernel module for TI omap watchdog timer.
+endef
+
+$(eval $(call KernelPackage,wdt-omap))
+
+
+define KernelPackage/wdt-orion
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Marvell Orion Watchdog timer
+ DEPENDS:=@TARGET_orion||@TARGET_kirkwood
+ KCONFIG:=CONFIG_ORION_WATCHDOG
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/orion_wdt.ko
+ AUTOLOAD:=$(call AutoLoad,50,orion_wdt)
+endef
+
+define KernelPackage/wdt-orion/description
+ Kernel module for Marvell orion watchdog timer.
+endef
+
+$(eval $(call KernelPackage,wdt-orion))
+
+
+define KernelPackage/booke-wdt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=PowerPC Book-E Watchdog Timer
+ DEPENDS:=@(TARGET_mpc85xx||TARGET_ppc40x||TARGET_ppc44x)
+ KCONFIG:=CONFIG_BOOKE_WDT
+ FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/booke_wdt.ko
+ AUTOLOAD:=$(call AutoLoad,50,booke_wdt)
+endef
+
+define KernelPackage/booke-wdt/description
+ Kernel module for PowerPC Book-E Watchdog Timer.
+endef
+
+$(eval $(call KernelPackage,booke-wdt))
+
+
+define KernelPackage/pwm
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=PWM generic API
+ KCONFIG:=CONFIG_GENERIC_PWM
+ FILES:=$(LINUX_DIR)/drivers/pwm/pwm.ko
+ AUTOLOAD:=$(call AutoLoad,50,pwm)
+endef
+
+define KernelPackage/pwm/description
+ Kernel module that implement a generic PWM API
+endef
+
+$(eval $(call KernelPackage,pwm))
+
+
+define KernelPackage/pwm-gpio
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=PWM over GPIO
+ DEPENDS:=+kmod-pwm
+ KCONFIG:=CONFIG_GPIO_PWM
+ FILES:=$(LINUX_DIR)/drivers/pwm/gpio-pwm.ko
+ AUTOLOAD:=$(call AutoLoad,51,gpio-pwm)
+endef
+
+define KernelPackage/pwm-gpio/description
+ Kernel module to models a single-channel PWM device using a timer and a GPIO pin
+endef
+
+$(eval $(call KernelPackage,pwm-gpio))
+
+
+define KernelPackage/rtc-marvell
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Marvell SoC built-in RTC support
+ $(call AddDepends/rtc)
+ DEPENDS+=@TARGET_kirkwood||TARGET_orion
+ KCONFIG:=CONFIG_RTC_DRV_MV
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-mv.ko
+ AUTOLOAD:=$(call AutoLoad,60,rtc-mv)
+endef
+
+define KernelPackage/rtc-marvell/description
+ Kernel module for Marvell SoC built-in RTC.
+endef
+
+$(eval $(call KernelPackage,rtc-marvell))
+
+define KernelPackage/rtc-pcf8563
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Philips PCF8563/Epson RTC8564 RTC support
+ $(call AddDepends/rtc)
+ KCONFIG:=CONFIG_RTC_DRV_PCF8563
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf8563.ko
+ AUTOLOAD:=$(call AutoLoad,60,rtc-pcf8563)
+endef
+
+define KernelPackage/rtc-pcf8563/description
+ Kernel module for Philips PCF8563 RTC chip.
+ The Epson RTC8564 should work as well.
+endef
+
+$(eval $(call KernelPackage,rtc-pcf8563))
+
+
+define KernelPackage/rtc-pcf2123
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Philips PCF2123 RTC support
+ $(call AddDepends/rtc)
+ KCONFIG:=CONFIG_RTC_DRV_PCF2123
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf2123.ko
+ AUTOLOAD:=$(call AutoLoad,60,rtc-pcf2123)
+endef
+
+define KernelPackage/rtc-pcf2123/description
+ Kernel module for Philips PCF2123 RTC chip.
+endef
+
+$(eval $(call KernelPackage,rtc-pcf2123))
+
+define KernelPackage/rtc-pt7c4338
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Pericom PT7C4338 RTC support
+ $(call AddDepends/rtc,+kmod-i2c-core)
+ KCONFIG:=CONFIG_RTC_DRV_PT7C4338
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pt7c4338.ko
+ AUTOLOAD:=$(call AutoLoad,60,rtc-pt7c4338)
+endef
+
+define KernelPackage/rtc-pt7c4338/description
+ Kernel module for Pericom PT7C4338 i2c RTC chip.
+endef
+
+$(eval $(call KernelPackage,rtc-pt7c4338))
+
+
+define KernelPackage/mtdtests
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=MTD subsystem tests
+ KCONFIG:=CONFIG_MTD_TESTS
+ FILES:=\
+ $(LINUX_DIR)/drivers/mtd/tests/mtd_nandecctest.ko \
+ $(LINUX_DIR)/drivers/mtd/tests/mtd_oobtest.ko \
+ $(LINUX_DIR)/drivers/mtd/tests/mtd_pagetest.ko \
+ $(LINUX_DIR)/drivers/mtd/tests/mtd_readtest.ko \
+ $(LINUX_DIR)/drivers/mtd/tests/mtd_speedtest.ko \
+ $(LINUX_DIR)/drivers/mtd/tests/mtd_stresstest.ko \
+ $(LINUX_DIR)/drivers/mtd/tests/mtd_subpagetest.ko \
+ $(LINUX_DIR)/drivers/mtd/tests/mtd_torturetest.ko
+endef
+
+define KernelPackage/mtdtests/description
+ Kernel modules for MTD subsystem/driver testing.
+endef
+
+$(eval $(call KernelPackage,mtdtests))
+
+
+define KernelPackage/nand
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=NAND flash support
+ KCONFIG:=CONFIG_MTD_NAND \
+ CONFIG_MTD_NAND_IDS \
+ CONFIG_MTD_NAND_ECC