-define KernelPackage/ath10k/config
- if PACKAGE_kmod-ath10k
-
- config ATH10K_STA_FW
- bool "Firmware optimized for STA operation"
- default n
- help
- Use the ath10k firmware optimized for wireless client instead
- of access point operation.
-
- endif
-endef
-
-define KernelPackage/carl9170
- $(call KernelPackage/mac80211/Default)
- TITLE:=Driver for Atheros AR9170 USB sticks
- DEPENDS:=@USB_SUPPORT +kmod-mac80211 +kmod-ath +kmod-usb-core +kmod-input-core +@DRIVER_11N_SUPPORT
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/carl9170/carl9170.ko
- AUTOLOAD:=$(call AutoProbe,carl9170)
-endef
-
-define KernelPackage/lib80211
- $(call KernelPackage/mac80211/Default)
- TITLE:=802.11 Networking stack
- DEPENDS:=+kmod-cfg80211
- FILES:= \
- $(PKG_BUILD_DIR)/net/wireless/lib80211.ko \
- $(PKG_BUILD_DIR)/net/wireless/lib80211_crypt_wep.ko \
- $(PKG_BUILD_DIR)/net/wireless/lib80211_crypt_ccmp.ko \
- $(PKG_BUILD_DIR)/net/wireless/lib80211_crypt_tkip.ko
- AUTOLOAD:=$(call AutoProbe, \
- lib80211 \
- lib80211_crypt_wep \
- lib80211_crypt_ccmp \
- lib80211_crypt_tkip \
- )
-endef
-
-define KernelPackage/lib80211/description
- Kernel modules for 802.11 Networking stack
- Includes:
- - lib80211
- - lib80211_crypt_wep
- - lib80211_crypt_tkip
- - lib80211_crytp_ccmp
-endef
-
-define KernelPackage/libertas-usb
- $(call KernelPackage/mac80211/Default)
- DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +kmod-usb-core +kmod-lib80211 +@DRIVER_WEXT_SUPPORT
- TITLE:=Marvell 88W8015 Wireless Driver
- FILES:= \
- $(PKG_BUILD_DIR)/drivers/net/wireless/libertas/libertas.ko \
- $(PKG_BUILD_DIR)/drivers/net/wireless/libertas/usb8xxx.ko
- AUTOLOAD:=$(call AutoProbe,libertas usb8xxx)
-endef
-
-define KernelPackage/libertas-sdio
- $(call KernelPackage/mac80211/Default)
- DEPENDS+= +kmod-cfg80211 +kmod-lib80211 +kmod-mmc +@DRIVER_WEXT_SUPPORT @!TARGET_uml
- TITLE:=Marvell 88W8686 Wireless Driver
- FILES:= \
- $(PKG_BUILD_DIR)/drivers/net/wireless/libertas/libertas.ko \
- $(PKG_BUILD_DIR)/drivers/net/wireless/libertas/libertas_sdio.ko
- AUTOLOAD:=$(call AutoProbe,libertas libertas_sdio)
-endef
-
-define KernelPackage/mac80211-hwsim
- $(call KernelPackage/mac80211/Default)
- TITLE:=mac80211 HW simulation device
- DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/mac80211_hwsim.ko
- AUTOLOAD:=$(call AutoProbe,mac80211_hwsim)
-endef
-
-define KernelPackage/net-libipw
- $(call KernelPackage/mac80211/Default)
- TITLE:=libipw for ipw2100 and ipw2200
- DEPENDS:=@PCI_SUPPORT +kmod-crypto-core +kmod-crypto-arc4 +kmod-crypto-aes +kmod-crypto-michael-mic +kmod-lib80211 +kmod-cfg80211 +@DRIVER_WEXT_SUPPORT
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ipw2x00/libipw.ko
- AUTOLOAD:=$(call AutoProbe,libipw)
-endef
-
-define KernelPackage/net-libipw/description
- Hardware independent IEEE 802.11 networking stack for ipw2100 and ipw2200.
-endef
-
-IPW2100_NAME:=ipw2100-fw
-IPW2100_VERSION:=1.3
-
-define Download/net-ipw2100
- URL:=http://bughost.org/firmware/
- FILE:=$(IPW2100_NAME)-$(IPW2100_VERSION).tgz
- MD5SUM=46aa75bcda1a00efa841f9707bbbd113
-endef
-$(eval $(call Download,net-ipw2100))
-
-define KernelPackage/net-ipw2100
- $(call KernelPackage/mac80211/Default)
- TITLE:=Intel IPW2100 driver
- DEPENDS:=@PCI_SUPPORT +kmod-net-libipw
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ipw2x00/ipw2100.ko
- AUTOLOAD:=$(call AutoProbe,ipw2100)
-endef
-
-define KernelPackage/net-ipw2100/description
- Kernel support for Intel IPW2100
- Includes:
- - ipw2100
-endef
-
-IPW2200_NAME:=ipw2200-fw
-IPW2200_VERSION:=3.1
-
-define Download/net-ipw2200
- URL:=http://bughost.org/firmware/
- FILE:=$(IPW2200_NAME)-$(IPW2200_VERSION).tgz
- MD5SUM=eaba788643c7cc7483dd67ace70f6e99
-endef
-$(eval $(call Download,net-ipw2200))
-
-define KernelPackage/net-ipw2200
- $(call KernelPackage/mac80211/Default)
- TITLE:=Intel IPW2200 driver
- DEPENDS:=@PCI_SUPPORT +kmod-net-libipw
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ipw2x00/ipw2200.ko
- AUTOLOAD:=$(call AutoProbe,ipw2200)
-endef
-
-define KernelPackage/net-ipw2200/description
- Kernel support for Intel IPW2200
- Includes:
- - ipw2200
-endef
-
-
-define KernelPackage/net-hermes
- $(call KernelPackage/mac80211/Default)
- TITLE:=Hermes 802.11b chipset support
- DEPENDS:=@PCI_SUPPORT||PCMCIA_SUPPORT +kmod-cfg80211 +@DRIVER_WEXT_SUPPORT
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/orinoco/orinoco.ko
- AUTOLOAD:=$(call AutoProbe,orinoco)
-endef
-
-define KernelPackage/net-hermes/description
- Kernel support for Hermes 802.11b chipsets
-endef
-
-define KernelPackage/net-hermes-pci
- $(call KernelPackage/mac80211/Default)
- TITLE:=Intersil Prism 2.5 PCI support
- DEPENDS:=@PCI_SUPPORT +kmod-net-hermes
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/orinoco/orinoco_pci.ko
- AUTOLOAD:=$(call AutoProbe,orinoco_pci)
-endef
-
-define KernelPackage/net-hermes-pci/description
- Kernel modules for Intersil Prism 2.5 PCI support
-endef
-
-define KernelPackage/net-hermes-plx
- $(call KernelPackage/mac80211/Default)
- TITLE:=PLX9052 based PCI adaptor
- DEPENDS:=@PCI_SUPPORT +kmod-net-hermes
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/orinoco/orinoco_plx.ko
- AUTOLOAD:=$(call AutoProbe,orinoco_plx)
-endef
-
-define KernelPackage/net-hermes-plx/description
- Kernel modules for Hermes in PLX9052 based PCI adaptors
-endef
-
-define KernelPackage/net-hermes-pcmcia
- $(call KernelPackage/mac80211/Default)
- TITLE:=Hermes based PCMCIA adaptors
- DEPENDS:=@PCMCIA_SUPPORT +kmod-net-hermes @BROKEN
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/orinoco/orinoco_cs.ko
- AUTOLOAD:=$(call AutoProbe,orinoco_cs)
-endef
-
-define KernelPackage/net-hermes-pcmcia/description
- Kernel modules for Hermes based PCMCIA adaptors
-endef
-
-define KernelPackage/iwlagn
- $(call KernelPackage/mac80211/Default)
- DEPENDS:= +kmod-mac80211 @PCI_SUPPORT +@DRIVER_11N_SUPPORT
- TITLE:=Intel AGN Wireless support
- FILES:= \
- $(PKG_BUILD_DIR)/drivers/net/wireless/iwlwifi/iwlwifi.ko \
- $(PKG_BUILD_DIR)/drivers/net/wireless/iwlwifi/dvm/iwldvm.ko
- AUTOLOAD:=$(call AutoProbe,iwlwifi iwldvm)
- MENU:=1
-endef
-
-define KernelPackage/iwlagn/description
- iwlagn kernel module for Intel 5000/5150/1000/6000/6050/6005/6030/100 support
-endef
-
-define KernelPackage/iwlagn/config
- if PACKAGE_kmod-iwlagn
-
- config IWL5000_FW
- bool "Intel 5000 Firmware"
- default y
- help
- Download and install firmware for:
- Intel Wireless WiFi 5100AGN, 5300AGN, and 5350AGN
-
- config IWL5150_FW
- bool "Intel 5150 Firmware"
- default y
- help
- Download and install firmware for:
- Intel Wireless WiFi 5150AGN
-
- config IWL1000_FW
- bool "Intel 1000 Firmware"
- default y
- help
- Download and install firmware for:
- Intel Centrino Wireless-N 1000
-
- config IWL6000_FW
- bool "Intel 6000 Firmware"
- default y
- help
- Download and install firmware for:
- Intel Centrino Ultimate-N 6300 and Advanced-N 6200
-
- config IWL6050_FW
- bool "Intel 6050 Firmware"
- default y
- help
- Download and install firmware for:
- Intel Centrino Advanced-N + WiMAX 6250 and Wireless-N + WiMAX 6150
-
- config IWL6005_FW
- bool "Intel 6005 Firmware"
- default y
- help
- Download and install firmware for:
- Intel Centrino Advanced-N 6205
-
- config IWL6030_FW
- bool "Intel 6030 Firmware"
- default y
- help
- Download and install firmware for:
- Intel Centrino Advanced-N 6230, Wireless-N 1030, Wireless-N 130 and Advanced-N 6235
-
- config IWL7260_FW
- bool "Intel 7260 Firmware"
- default y
- help
- Download and install firmware for:
- Intel Dual Band Wireless-N 7260 and Intel Dual Band Wireless-AC 7260
-
- config IWL7265_FW
- bool "Intel 7265 Firmware"
- default y
- help
- Download and install firmware for:
- Intel Wireless 7265
-
- config IWL100_FW
- bool "Intel 100 Firmware"
- default y
- help
- Download and install firmware for:
- Intel Centrino Wireless-N 100
-
- config IWL2000_FW
- bool "Intel 2000 Firmware"
- default y
- help
- Download and install firmware for:
- Intel Centrino Wireless-N 2200
-
- config IWL2030_FW
- bool "Intel 2030 Firmware"
- default y
- help
- Download and install firmware for:
- Intel Centrino Wireless-N 2230
-
- config IWL105_FW
- bool "Intel 105 Firmware"
- default y
- help
- Download and install firmware for:
- Intel Centrino Wireless-N 105
-
- config IWL135_FW
- bool "Intel 135 Firmware"
- default y
- help
- Download and install firmware for:
- Intel Centrino Wireless-N 135
-
- config IWL3160_FW
- bool "Intel 3160 Firmware"
- default y
- help
- Download and install firmware for:
- Intel Wireless 3160
- endif
-endef
-
-define KernelPackage/iwl-legacy
- $(call KernelPackage/mac80211/Default)
- DEPENDS:= +kmod-mac80211 @PCI_SUPPORT
- TITLE:=Intel legacy Wireless support
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/iwlegacy/iwlegacy.ko
- AUTOLOAD:=$(call AutoProbe,iwlegacy)
-endef
-
-define KernelPackage/iwl-legacy/description
- iwl-legacy kernel module for legacy Intel wireless support
-endef
-
-define KernelPackage/iwl3945
- $(call KernelPackage/mac80211/Default)
- DEPENDS:= +kmod-mac80211 +kmod-iwl-legacy
- TITLE:=Intel iwl3945 Wireless support
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/iwlegacy/iwl3945.ko
- AUTOLOAD:=$(call AutoProbe,iwl3945)
-endef
-
-define KernelPackage/iwl3945/description
- iwl3945 kernel module for Intel 3945 support
-endef
-
-define KernelPackage/iwl4965
- $(call KernelPackage/mac80211/Default)
- DEPENDS:= +kmod-mac80211 +kmod-iwl-legacy +@DRIVER_11N_SUPPORT
- TITLE:=Intel iwl4965 Wireless support
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/iwlegacy/iwl4965.ko
- AUTOLOAD:=$(call AutoProbe,iwl4965)
-endef
-
-define KernelPackage/iwl4965/description
- iwl4965 kernel module for Intel 4965 support
-endef
-
-
-define KernelPackage/mwl8k
- $(call KernelPackage/mac80211/Default)
- TITLE:=Driver for Marvell TOPDOG 802.11 Wireless cards
- URL:=http://wireless.kernel.org/en/users/Drivers/mwl8k
- DEPENDS+= @PCI_SUPPORT +kmod-mac80211 +@DRIVER_11N_SUPPORT
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/mwl8k.ko
- AUTOLOAD:=$(call AutoProbe,mwl8k)
-endef
-
-define KernelPackage/mwl8k/description
- Kernel modules for Marvell TOPDOG 802.11 Wireless cards
-endef
-
-
-define KernelPackage/mwifiex-pcie
- $(call KernelPackage/mac80211/Default)
- TITLE:=Driver for Marvell 802.11n/802.11ac PCIe Wireless cards
- URL:=http://wireless.kernel.org/en/users/Drivers/mwifiex
- DEPENDS+= @PCI_SUPPORT +kmod-mac80211 +@DRIVER_11N_SUPPORT
- FILES:= \
- $(PKG_BUILD_DIR)/drivers/net/wireless/mwifiex/mwifiex.ko \
- $(PKG_BUILD_DIR)/drivers/net/wireless/mwifiex/mwifiex_pcie.ko
- AUTOLOAD:=$(call AutoProbe,mwifiex_pcie)
-endef
-
-define KernelPackage/mwifiex-pcie/description
- Kernel modules for Marvell 802.11n/802.11ac PCIe Wireless cards
-endef
-
-
-define KernelPackage/wlcore
- $(call KernelPackage/mac80211/Default)
- TITLE:=TI common driver part
- DEPENDS+= @TARGET_omap +kmod-mac80211 +@DRIVER_11N_SUPPORT
- FILES:= \
- $(PKG_BUILD_DIR)/drivers/net/wireless/ti/wlcore/wlcore.ko \
- $(PKG_BUILD_DIR)/drivers/net/wireless/ti/wlcore/wlcore_sdio.ko
- AUTOLOAD:=$(call AutoProbe,wlcore wlcore_sdio)
-endef
-
-define KernelPackage/wlcore/description
- This module contains some common parts needed by TI Wireless drivers.
-endef
-
-define KernelPackage/wl12xx
- $(call KernelPackage/mac80211/Default)
- TITLE:=Driver for TI WL12xx
- URL:=http://wireless.kernel.org/en/users/Drivers/wl12xx
- DEPENDS+= +kmod-wlcore
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ti/wl12xx/wl12xx.ko
- AUTOLOAD:=$(call AutoProbe,wl12xx)
-endef
-
-define KernelPackage/wl12xx/description
- Kernel modules for TI WL12xx
-endef
-
-define KernelPackage/wl18xx
- $(call KernelPackage/mac80211/Default)
- TITLE:=Driver for TI WL18xx
- URL:=http://wireless.kernel.org/en/users/Drivers/wl18xx
- DEPENDS+= +kmod-wlcore
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ti/wl18xx/wl18xx.ko
- AUTOLOAD:=$(call AutoProbe,wl18xx)
-endef
-
-define KernelPackage/wl18xx/description
- Kernel modules for TI WL18xx
-endef
-
-
-#Broadcom firmware
-ifneq ($(CONFIG_B43_FW_6_30),)
- PKG_B43_FWV4_NAME:=broadcom-wl
- PKG_B43_FWV4_VERSION:=6.30.163.46
- PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).wl_apsta.o
- PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
- PKG_B43_FWV4_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/
- PKG_B43_FWV4_MD5SUM:=6fe97e9368d25342a1ab943d3cf3496d
-else
-ifneq ($(CONFIG_B43_FW_5_10),)
- PKG_B43_FWV4_NAME:=broadcom-wl
- PKG_B43_FWV4_VERSION:=5.10.56.27.3
- PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/driver/wl_apsta/wl_prebuilt.o
- PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)_mipsel.tar.bz2
- PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/
- PKG_B43_FWV4_MD5SUM:=3363e3a6b3d9d73c49dea870c7834eac
-else
-ifneq ($(CONFIG_B43_FW_4_178),)
- PKG_B43_FWV4_NAME:=broadcom-wl
- PKG_B43_FWV4_VERSION:=4.178.10.4
- PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl_apsta.o
- PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
- PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/
- PKG_B43_FWV4_MD5SUM:=14477e8cbbb91b11896affac9b219fdb
-else
-ifneq ($(CONFIG_B43_FW_5_100_138),)
- PKG_B43_FWV4_NAME:=broadcom-wl
- PKG_B43_FWV4_VERSION:=5.100.138
- PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl_apsta.o
- PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
- PKG_B43_FWV4_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/
- PKG_B43_FWV4_MD5SUM:=f4e357b09eaf5d8b1f1920cf3493a555
-else
- PKG_B43_FWV4_NAME:=broadcom-wl
- PKG_B43_FWV4_VERSION:=4.150.10.5
- PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/driver/wl_apsta_mimo.o
- PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
- PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/
- PKG_B43_FWV4_MD5SUM:=0c6ba9687114c6b598e8019e262d9a60
-endif
-endif
-endif
-endif
-ifneq ($(CONFIG_B43_OPENFIRMWARE),)
- PKG_B43_FWV4_NAME:=broadcom-wl
- PKG_B43_FWV4_VERSION:=5.2
- PKG_B43_FWV4_OBJECT:=openfwwf-$(PKG_B43_FWV4_VERSION)
- PKG_B43_FWV4_SOURCE:=openfwwf-$(PKG_B43_FWV4_VERSION).tar.gz
- PKG_B43_FWV4_SOURCE_URL:=http://www.ing.unibs.it/openfwwf/firmware/
- PKG_B43_FWV4_MD5SUM:=e045a135453274e439ae183f8498b0fa
-endif
-
-
-PKG_B43_FWV3_NAME:=wl_apsta
-PKG_B43_FWV3_VERSION:=3.130.20.0
-PKG_B43_FWV3_SOURCE:=$(PKG_B43_FWV3_NAME)-$(PKG_B43_FWV3_VERSION).o
-PKG_B43_FWV3_SOURCE_URL:=http://downloads.openwrt.org/sources/
-PKG_B43_FWV3_MD5SUM:=e08665c5c5b66beb9c3b2dd54aa80cb3
-
-define Download/b43
- FILE:=$(PKG_B43_FWV4_SOURCE)
- URL:=$(PKG_B43_FWV4_SOURCE_URL)
- MD5SUM:=$(PKG_B43_FWV4_MD5SUM)
-endef
-$(eval $(call Download,b43))
-
-define Download/b43legacy
- FILE:=$(PKG_B43_FWV3_SOURCE)
- URL:=$(PKG_B43_FWV3_SOURCE_URL)
- MD5SUM:=$(PKG_B43_FWV3_MD5SUM)
-endef
-$(eval $(call Download,b43legacy))
-
-
-define KernelPackage/b43
- $(call KernelPackage/mac80211/Default)
- TITLE:=Broadcom 43xx wireless support
- URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43
- KCONFIG:= \
- CONFIG_HW_RANDOM=y
- # Depend on PCI_SUPPORT to make sure we can select kmod-bcma or kmod-ssb
- DEPENDS += \
- @PCI_SUPPORT +kmod-mac80211 \
- $(if $(CONFIG_PACKAGE_B43_USE_SSB),+kmod-ssb) \
- $(if $(CONFIG_PACKAGE_B43_USE_BCMA),+kmod-bcma)
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/b43/b43.ko
- AUTOLOAD:=$(call AutoProbe,b43)
- MENU:=1
-endef
-
-define KernelPackage/b43/config
-
-config PACKAGE_B43_USE_SSB
- select PACKAGE_kmod-ssb
- tristate
- depends on !TARGET_brcm47xx && !TARGET_brcm63xx
- default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB
- default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_SSB
-
-config PACKAGE_B43_USE_BCMA
- select PACKAGE_kmod-bcma
- tristate
- depends on !TARGET_brcm47xx
- default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB
- default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA
-
- if PACKAGE_kmod-b43
-
- choice
- prompt "b43 firmware version"
- default B43_FW_5_100_138
- help
- This option allows you to select the version of the b43 firmware.
-
- config B43_FW_4_150
- bool "Firmware 410.2160 from driver 4.150.10.5 (old stable)"
- help
- Old stable firmware for BCM43xx devices.
-
- If unsure, select this.
-
- config B43_FW_4_178
- bool "Firmware 478.104 from driver 4.178.10.4"
- help
- Older firmware for BCM43xx devices.
-
- If unsure, select the "stable" firmware.
-
- config B43_FW_5_10
- bool "Firmware 508.1084 from driver 5.10.56.27"
- help
- Older firmware for BCM43xx devices.
-
- If unsure, select the "stable" firmware.
-
- config B43_FW_5_100_138
- bool "Firmware 666.2 from driver 5.100.138 (stable)"
- help
- The currently default firmware for BCM43xx devices.
-
- This firmware currently gets most of the testing and is needed for some N-PHY devices.
-
- If unsure, select the this firmware.
-
- config B43_FW_6_30
- bool "Firmware 784.2 from driver 6.30.163.46 (experimental)"
- help
- Newer experimental firmware for BCM43xx devices.
-
- This firmware is mostly untested.
-
- If unsure, select the "stable" firmware.
-
- config B43_OPENFIRMWARE
- bool "Open FirmWare for WiFi networks"
- help
- Opensource firmware for BCM43xx devices.
-
- Do _not_ select this, unless you know what you are doing.
- The Opensource firmware is not suitable for embedded devices, yet.
- It does not support QoS, which is bad for AccessPoints.
- It does not support hardware crypto acceleration, which is a showstopper
- for embedded devices with low CPU resources.
-
- If unsure, select the "stable" firmware.
-
- endchoice
-
- config B43_FW_SQUASH
- bool "Remove unnecessary firmware files"
- depends on !B43_OPENFIRMWARE
- default y
- help
- This options allows you to remove unnecessary b43 firmware files
- from the final rootfs image. This can reduce the rootfs size by
- up to 200k.
-
- If unsure, say Y.
-
- config B43_FW_SQUASH_COREREVS
- string "Core revisions to include"
- depends on B43_FW_SQUASH
- default "5,6,7,8,9,10,11,13,15" if TARGET_brcm47xx_legacy
- default "16,28,29,30" if TARGET_brcm47xx_mips74k
- default "5,6,7,8,9,10,11,13,15,16,28,29,30"
- help
- This is a comma seperated list of core revision numbers.
-
- Example (keep files for rev5 only):
- 5
-
- Example (keep files for rev5 and rev11):
- 5,11
-
- config B43_FW_SQUASH_PHYTYPES
- string "PHY types to include"
- depends on B43_FW_SQUASH
- default "G,LP" if TARGET_brcm47xx_legacy
- default "N,HT" if TARGET_brcm47xx_mips74k
- default "G,LP,N,HT"
- help
- This is a comma seperated list of PHY types:
- A => A-PHY
- AG => Dual A-PHY G-PHY
- G => G-PHY
- LP => LP-PHY
- N => N-PHY
- HT => HT-PHY
- LCN => LCN-PHY
- LCN40 => LCN40-PHY
- AC => AC-PHY
-
- Example (keep files for G-PHY only):
- G
-
- Example (keep files for G-PHY and N-PHY):
- G,N
-
- choice
- prompt "Supported buses"
- default PACKAGE_B43_BUSES_BCMA_AND_SSB
- help
- This allows choosing buses that b43 should support.
-
- config PACKAGE_B43_BUSES_BCMA_AND_SSB
- depends on !TARGET_brcm47xx_legacy && !TARGET_brcm47xx_mips74k
- bool "BCMA and SSB"
-
- config PACKAGE_B43_BUSES_BCMA
- depends on !TARGET_brcm47xx_legacy
- bool "BCMA only"
-
- config PACKAGE_B43_BUSES_SSB
- depends on !TARGET_brcm47xx_mips74k
- bool "SSB only"
-
- endchoice
-
- config PACKAGE_B43_DEBUG
- bool "Enable debug output and debugfs for b43"
- default n
- help
- Enable additional debug output and runtime sanity checks for b43
- and enables the debugfs interface.
-
- If unsure, say N.
-
- config PACKAGE_B43_PIO
- bool "Enable support for PIO transfer mode"
- default n
- help
- Enable support for using PIO instead of DMA. Unless you have DMA
- transfer problems you don't need this.
-
- If unsure, say N.
-
- config PACKAGE_B43_PHY_G
- bool "Enable support for G-PHYs"
- default n if TARGET_brcm47xx_mips74k
- default y
- help
- Enable support for G-PHY. This includes support for the following devices:
- PCI: BCM4306, BCM4311, BCM4318
- SoC: BCM5352E, BCM4712
-
- If unsure, say Y.
-
- config PACKAGE_B43_PHY_N
- bool "Enable support for N-PHYs"
- default n if TARGET_brcm47xx_legacy
- default y
- help
- Enable support for N-PHY. This includes support for the following devices:
- PCI: BCM4321, BCM4322, BCM43222, BCM43224, BCM43225
- SoC: BCM4716, BCM4717, BCM4718
-
- Currently only 11g speed is available.
-
- If unsure, say Y.
-
- config PACKAGE_B43_PHY_LP
- bool "Enable support for LP-PHYs"
- default n if TARGET_brcm47xx_mips74k
- default y
- help
- Enable support for LP-PHY. This includes support for the following devices:
- PCI: BCM4312
- SoC: BCM5354
-
- If unsure, say Y.
-
- config PACKAGE_B43_PHY_HT
- bool "Enable support for HT-PHYs"
- default n if TARGET_brcm47xx_legacy
- default y
- help
- Enable support for HT-PHY. This includes support for the following devices:
- PCI: BCM4331
-
- Currently only 11g speed is available.
-
- If unsure, say Y.
-
- config PACKAGE_B43_PHY_LCN
- bool "Enable support for LCN-PHYs"
- depends on BROKEN
- default n
- help
- Currently broken.
-
- If unsure, say N.
-
- endif
-endef
-
-define KernelPackage/b43/description
-Kernel module for Broadcom 43xx wireless support (mac80211 stack) new
-endef
-
-define KernelPackage/b43legacy
- $(call KernelPackage/mac80211/Default)
- TITLE:=Broadcom 43xx-legacy wireless support
- URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43
- KCONFIG:= \
- CONFIG_HW_RANDOM=y
- DEPENDS+= +kmod-mac80211 +!(TARGET_brcm47xx||TARGET_brcm63xx):kmod-ssb
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/b43legacy/b43legacy.ko
- AUTOLOAD:=$(call AutoProbe,b43legacy)
- MENU:=1
-endef
-
-define KernelPackage/b43legacy/config
- if PACKAGE_kmod-b43legacy
-
- config B43LEGACY_FW_SQUASH
- bool "Remove unnecessary firmware files"
- default y
- help
- This options allows you to remove unnecessary b43legacy firmware files
- from the final rootfs image. This can reduce the rootfs size by
- up to 50k.
-
- If unsure, say Y.
-
- config B43LEGACY_FW_SQUASH_COREREVS
- string "Core revisions to include"
- depends on B43LEGACY_FW_SQUASH
- default "1,2,3,4"
- help
- This is a comma seperated list of core revision numbers.
-
- Example (keep files for rev4 only):
- 4
-
- Example (keep files for rev2 and rev4):
- 2,4
-
- endif
-endef
-
-define KernelPackage/b43legacy/description
-Kernel module for Broadcom 43xx-legacy wireless support (mac80211 stack) new
-endef
-
-
-define KernelPackage/brcmutil
- $(call KernelPackage/mac80211/Default)
- TITLE:=Broadcom IEEE802.11n common driver parts
- URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
- DEPENDS+=@PCI_SUPPORT||USB_SUPPORT
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/brcm80211/brcmutil/brcmutil.ko
- AUTOLOAD:=$(call AutoProbe,brcmutil)
- MENU:=1
-endef
-
-define KernelPackage/brcmutil/description
- This module contains some common parts needed by Broadcom Wireless drivers brcmsmac and brcmfmac.
-endef
-
-define KernelPackage/brcmutil/config
- if PACKAGE_kmod-brcmutil
-
- config PACKAGE_BRCM80211_DEBUG
- bool "Broadcom wireless driver debugging"
- help
- Say Y, if you want to debug brcmsmac and brcmfmac wireless driver.
-
- endif
-endef
-
-PKG_BRCMSMAC_FW_NAME:=broadcom-wl
-PKG_BRCMSMAC_FW_VERSION:=5.100.138
-PKG_BRCMSMAC_FW_OBJECT:=$(PKG_BRCMSMAC_FW_NAME)-$(PKG_BRCMSMAC_FW_VERSION)/linux/wl_apsta.o
-PKG_BRCMSMAC_FW_SOURCE:=$(PKG_BRCMSMAC_FW_NAME)-$(PKG_BRCMSMAC_FW_VERSION).tar.bz2
-PKG_BRCMSMAC_FW_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/
-PKG_BRCMSMAC_FW_MD5SUM:=f4e357b09eaf5d8b1f1920cf3493a555
-
-define Download/brcmsmac
- FILE:=$(PKG_BRCMSMAC_FW_SOURCE)
- URL:=$(PKG_BRCMSMAC_FW_SOURCE_URL)
- MD5SUM:=$(PKG_BRCMSMAC_FW_MD5SUM)
-endef
-$(eval $(call Download,brcmsmac))
-
-define KernelPackage/brcmsmac
- $(call KernelPackage/mac80211/Default)
- TITLE:=Broadcom IEEE802.11n PCIe SoftMAC WLAN driver
- URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
- DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT +!TARGET_brcm47xx:kmod-bcma +kmod-lib-cordic +kmod-lib-crc8 +kmod-brcmutil
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/brcm80211/brcmsmac/brcmsmac.ko
- AUTOLOAD:=$(call AutoProbe,brcmsmac)
- MENU:=1
-endef
-
-define KernelPackage/brcmsmac/description
- Kernel module for Broadcom IEEE802.11n PCIe Wireless cards
-endef
-
-define KernelPackage/brcmsmac/config
- if PACKAGE_kmod-brcmsmac
-
- config BRCMSMAC_USE_FW_FROM_WL
- bool "Use firmware extracted from broadcom proprietary driver"
- default y
- help
- Instead of using the official brcmsmac firmware a firmware
- version 666.2 extracted from the proprietary Broadcom driver
- is used. This is needed to get core rev 17 used in bcm4716
- to work.
-
- If unsure, say Y.
-
- endif
-endef
-
-
-define KernelPackage/brcmfmac
- $(call KernelPackage/mac80211/Default)
- TITLE:=Broadcom IEEE802.11n USB FullMAC WLAN driver
- URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
- DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +@DRIVER_11N_SUPPORT +kmod-brcmutil +BRCMFMAC_SDIO:kmod-mmc +BRCMFMAC_USB:kmod-usb-core
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/brcm80211/brcmfmac/brcmfmac.ko
- AUTOLOAD:=$(call AutoProbe,brcmfmac)
-endef
-
-define KernelPackage/brcmfmac/description
- Kernel module for Broadcom IEEE802.11n USB Wireless cards
-endef
-
-define KernelPackage/brcmfmac/config
- if PACKAGE_kmod-brcmfmac
-
- config BRCMFMAC_SDIO
- bool "Enable SDIO bus interface support"
- default n
- help
- Enable support for cards attached to an SDIO bus.
- Select this option only if you are sure that your
- board has a Broadcom wireless chip atacched to
- that bus.
-
- config BRCMFMAC_USB
- bool "Enable USB bus interface support"
- depends on USB_SUPPORT
- default y
- help
- Supported USB connected chipsets:
- BCM43235, BCM43236, BCM43238 (all in revision 3 only)
- BCM43143, BCM43242, BCM43566, BCM43569
-
- config BRCMFMAC_PCIE
- bool "Enable PCIE bus interface support"
- depends on PCI_SUPPORT
- default y
- help
- Supported PCIe connected chipsets:
- BCM4354, BCM4356, BCM43567, BCM43570, BCM43602
-
- endif
-endef
-
-config_package=$(if $(CONFIG_PACKAGE_kmod-$(1)),m)
-
-config-y:= \
- WLAN \
- NL80211_TESTMODE \
- CFG80211_WEXT \
- CFG80211_INTERNAL_REGDB \
- CFG80211_CERTIFICATION_ONUS \
- MAC80211_RC_MINSTREL \
- MAC80211_RC_MINSTREL_HT \
- MAC80211_RC_MINSTREL_VHT \
- MAC80211_RC_DEFAULT_MINSTREL \
-
-config-$(call config_package,cfg80211) += CFG80211
-
-config-$(call config_package,mac80211) += MAC80211
-config-$(CONFIG_PACKAGE_MAC80211_MESH) += MAC80211_MESH
-ifdef CONFIG_PACKAGE_MAC80211_DEBUGFS
- config-y += \
- CFG80211_DEBUGFS \
- MAC80211_DEBUGFS \
- ATH9K_DEBUGFS \
- ATH9K_HTC_DEBUGFS \
- ATH10K_DEBUGFS \
- CARL9170_DEBUGFS \
- ATH5K_DEBUG
-endif
-
-config-$(call config_package,lib80211) += LIB80211 LIB80211_CRYPT_WEP LIB80211_CRYPT_CCMP LIB80211_CRYPT_TKIP
-
-config-$(call config_package,ath) += ATH_CARDS ATH_COMMON
-config-$(CONFIG_PACKAGE_ATH_DEBUG) += ATH_DEBUG ATH10K_DEBUG
-config-$(CONFIG_PACKAGE_ATH_DFS) += ATH9K_DFS_CERTIFIED ATH10K_DFS_CERTIFIED
-
-config-$(call config_package,ath9k) += ATH9K
-config-$(call config_package,ath9k-common) += ATH9K_COMMON
-config-$(CONFIG_TARGET_ar71xx) += ATH9K_AHB
-config-$(CONFIG_PCI) += ATH9K_PCI
-config-$(CONFIG_ATH_USER_REGD) += ATH_USER_REGD
-config-$(CONFIG_ATH9K_SUPPORT_PCOEM) += ATH9K_PCOEM
-
-config-$(call config_package,ath9k-htc) += ATH9K_HTC
-config-$(call config_package,ath10k) += ATH10K ATH10K_PCI
-
-config-$(call config_package,ath5k) += ATH5K
-ifdef CONFIG_TARGET_ath25
- config-y += ATH5K_AHB
-else
- config-y += ATH5K_PCI
-endif
-
-config-$(call config_package,carl9170) += CARL9170
-
-config-$(call config_package,b43) += B43
-config-$(CONFIG_PACKAGE_B43_BUSES_BCMA_AND_SSB) += B43_BUSES_BCMA_AND_SSB
-config-$(CONFIG_PACKAGE_B43_BUSES_BCMA) += B43_BUSES_BCMA
-config-$(CONFIG_PACKAGE_B43_BUSES_SSB) += B43_BUSES_SSB
-config-$(CONFIG_PACKAGE_B43_PHY_G) += B43_PHY_G
-config-$(CONFIG_PACKAGE_B43_PHY_N) += B43_PHY_N
-config-$(CONFIG_PACKAGE_B43_PHY_LP) += B43_PHY_LP
-config-$(CONFIG_PACKAGE_B43_PHY_HT) += B43_PHY_HT
-config-$(CONFIG_PACKAGE_B43_PIO) += B43_PIO
-config-$(CONFIG_PACKAGE_B43_DEBUG) += B43_DEBUG
-
-config-$(call config_package,b43legacy) += B43LEGACY
-config-y += B43LEGACY_DMA_MODE
-
-config-$(call config_package,brcmutil) += BRCMUTIL
-config-$(call config_package,brcmsmac) += BRCMSMAC
-config-$(call config_package,brcmfmac) += BRCMFMAC
-config-$(CONFIG_BRCMFMAC_SDIO) += BRCMFMAC_SDIO
-config-$(CONFIG_BRCMFMAC_USB) += BRCMFMAC_USB
-config-$(CONFIG_BRCMFMAC_PCIE) += BRCMFMAC_PCIE
-config-$(CONFIG_PACKAGE_BRCM80211_DEBUG) += BRCMDBG
-
-config-$(call config_package,mac80211-hwsim) += MAC80211_HWSIM
-
-config-$(call config_package,rt2x00-lib) += RT2X00 RT2X00_LIB
-config-$(call config_package,rt2x00-pci) += RT2X00_LIB_PCI
-config-$(call config_package,rt2x00-mmio) += RT2X00_LIB_MMIO
-config-$(call config_package,rt2x00-usb) += RT2X00_LIB_USB
-config-$(CONFIG_PACKAGE_RT2X00_LIB_DEBUGFS) += RT2X00_LIB_DEBUGFS
-config-$(CONFIG_PACKAGE_RT2X00_DEBUG) += RT2X00_DEBUG
-
-config-$(call config_package,rt2400-pci) += RT2400PCI
-config-$(call config_package,rt2500-pci) += RT2500PCI
-config-$(call config_package,rt2500-usb) += RT2500USB
-config-$(call config_package,rt61-pci) += RT61PCI
-config-$(call config_package,rt73-usb) += RT73USB
-
-config-$(call config_package,rt2800-lib) += RT2800_LIB
-
-config-$(call config_package,rt2800-soc) += RT2800SOC
-config-$(call config_package,rt2800-pci) += RT2800PCI
-config-y += RT2800PCI_RT33XX RT2800PCI_RT35XX RT2800PCI_RT53XX RT2800PCI_RT3290
-
-config-$(call config_package,rt2800-usb) += RT2800USB
-config-y += RT2800USB_RT33XX RT2800USB_RT35XX RT2800USB_RT3573 RT2800USB_RT53XX RT2800USB_RT55XX
-
-config-$(call config_package,iwl-legacy) += IWLEGACY
-config-$(call config_package,iwl3945) += IWL3945
-config-$(call config_package,iwl4965) += IWL4965
-config-$(call config_package,iwlagn) += IWLWIFI IWLDVM
-
-config-$(call config_package,net-libipw) += LIBIPW
-config-$(call config_package,net-ipw2100) += IPW2100
-config-$(call config_package,net-ipw2200) += IPW2200
-
-config-$(call config_package,p54-common) += P54_COMMON
-config-$(call config_package,p54-pci) += P54_PCI
-config-$(call config_package,p54-usb) += P54_USB
-config-$(call config_package,p54-spi) += P54_SPI
-
-config-$(call config_package,net-hermes) += HERMES
-config-$(call config_package,net-hermes-pci) += PCI_HERMES
-config-$(call config_package,net-hermes-plx) += PLX_HERMES
-config-$(call config_package,net-hermes-pcmcia) += PCMCIA_HERMES
-config-y += HERMES_PRISM
-
-config-$(call config_package,adm8211) += ADM8211
-config-$(call config_package,libertas-sdio) += LIBERTAS LIBERTAS_SDIO
-config-$(call config_package,libertas-usb) += LIBERTAS LIBERTAS_USB
-config-$(call config_package,mwl8k) += MWL8K
-config-$(call config_package,mwifiex-pcie) += MWIFIEX MWIFIEX_PCIE
-config-$(call config_package,rtl8180) += RTL8180
-config-$(call config_package,rtl8187) += RTL8187
-config-$(call config_package,wlcore) += WLCORE WLCORE_SDIO
-config-$(call config_package,wl12xx) += WL12XX
-config-$(call config_package,wl18xx) += WL18XX
-config-y += WL_TI WILINK_PLATFORM_DATA
-config-$(call config_package,zd1211rw) += ZD1211RW
-
-config-$(call config_package,rtlwifi) += RTL_CARDS RTLWIFI
-config-$(call config_package,rtlwifi-pci) += RTLWIFI_PCI
-config-$(call config_package,rtlwifi-usb) += RTLWIFI_USB
-config-$(call config_package,rtl8192c-common) += RTL8192C_COMMON
-config-$(call config_package,rtl8192ce) += RTL8192CE
-config-$(call config_package,rtl8192se) += RTL8192SE
-config-$(call config_package,rtl8192de) += RTL8192DE
-config-$(call config_package,rtl8192cu) += RTL8192CU
-config-$(CONFIG_PACKAGE_RTLWIFI_DEBUG) += RTLWIFI_DEBUG
-
-config-$(CONFIG_LEDS_TRIGGERS) += MAC80211_LEDS B43_LEDS B43LEGACY_LEDS
-
-MAKE_OPTS:= -C "$(PKG_BUILD_DIR)" \
- CROSS_COMPILE="$(KERNEL_CROSS)" \
- ARCH="$(LINUX_KARCH)" \
- EXTRA_CFLAGS="-I$(PKG_BUILD_DIR)/include" \
- KLIB_BUILD="$(LINUX_DIR)" \
- MODPROBE=true \
- KLIB=$(TARGET_MODULES_DIR) \
- KERNEL_SUBLEVEL=$(lastword $(subst ., ,$(KERNEL_PATCHVER))) \
- KBUILD_LDFLAGS_MODULE_PREREQ=
-
-ifneq ($(findstring c,$(OPENWRT_VERBOSE)),)
- MAKE_OPTS += V=1
-endif
-
-define ConfigVars
-$(subst $(space),,$(foreach opt,$(config-$(1)),CPTCFG_$(opt)=$(1)
-))
-endef
-
-define mac80211_config
-$(call ConfigVars,m)$(call ConfigVars,y)
-endef
-$(eval $(call shexport,mac80211_config))
-
-define Build/Prepare
- rm -rf $(PKG_BUILD_DIR)
- mkdir -p $(PKG_BUILD_DIR)
- $(PKG_UNPACK)
- $(Build/Patch)
- $(TAR) -C $(PKG_BUILD_DIR) -xzf $(DL_DIR)/$(IPW2100_NAME)-$(IPW2100_VERSION).tgz
- $(TAR) -C $(PKG_BUILD_DIR) -xzf $(DL_DIR)/$(IPW2200_NAME)-$(IPW2200_VERSION).tgz
- $(TAR) -C $(PKG_BUILD_DIR) -xjf $(DL_DIR)/$(ZD1211FW_NAME)-$(ZD1211FW_VERSION).tar.bz2
- $(TAR) -C $(PKG_BUILD_DIR) -xjf $(DL_DIR)/$(PKG_LINUX_FIRMWARE_SOURCE)
- $(TAR) -C $(PKG_BUILD_DIR) -xjf $(DL_DIR)/$(PKG_ATH10K_LINUX_FIRMWARE_SOURCE)
- rm -rf \
- $(PKG_BUILD_DIR)/include/linux/ssb \
- $(PKG_BUILD_DIR)/include/linux/bcma \
- $(PKG_BUILD_DIR)/include/net/bluetooth
-
- rm -f \
- $(PKG_BUILD_DIR)/include/linux/cordic.h \
- $(PKG_BUILD_DIR)/include/linux/crc8.h \
- $(PKG_BUILD_DIR)/include/linux/eeprom_93cx6.h \
- $(PKG_BUILD_DIR)/include/linux/wl12xx.h \
- $(PKG_BUILD_DIR)/include/linux/spi/libertas_spi.h \
- $(PKG_BUILD_DIR)/include/net/ieee80211.h
-
- echo 'compat-wireless-$(PKG_VERSION)-$(PKG_RELEASE)-$(REVISION)' > $(PKG_BUILD_DIR)/compat_version
- $(CP) ./files/regdb.txt $(PKG_BUILD_DIR)/net/wireless/db.txt
-endef
-
-ifneq ($(CONFIG_PACKAGE_kmod-cfg80211)$(CONFIG_PACKAGE_kmod-lib80211),)
- define Build/Compile/kmod
- rm -rf $(PKG_BUILD_DIR)/modules
- +$(MAKE) $(PKG_JOBS) $(MAKE_OPTS) modules
- endef
-endif
-
-define Build/Configure
- cmp $(PKG_BUILD_DIR)/include/linux/ath9k_platform.h $(LINUX_DIR)/include/linux/ath9k_platform.h
- cmp $(PKG_BUILD_DIR)/include/linux/ath5k_platform.h $(LINUX_DIR)/include/linux/ath5k_platform.h
- cmp $(PKG_BUILD_DIR)/include/linux/rt2x00_platform.h $(LINUX_DIR)/include/linux/rt2x00_platform.h
-endef
-
-define Build/Compile
- $(SH_FUNC) var2file "$(call shvar,mac80211_config)" $(PKG_BUILD_DIR)/.config
- $(MAKE) $(MAKE_OPTS) allnoconfig
- $(call Build/Compile/kmod)