-INSERT
-
-#define acpid_trivial_usage \
- "[-d] [-c CONFDIR] [-l LOGFILE] [-e PROC_EVENT_FILE] [EVDEV_EVENT_FILE]..."
-#define acpid_full_usage "\n\n" \
- "Listen to ACPI events and spawn specific helpers on event arrival\n" \
- "\nOptions:" \
- "\n -d Don't daemonize, log to stderr" \
- "\n -c DIR Config directory [/etc/acpi]" \
- "\n -e FILE /proc event file [/proc/acpi/event]" \
- "\n -l FILE Log file [/var/log/acpid]" \
- IF_FEATURE_ACPID_COMPAT( \
- "\n\nAccept and ignore compatibility options -g -m -s -S -v" \
- )
-
-#define acpid_example_usage \
- "# acpid -l /var/log/my-acpi-log\n" \
- "# acpid -d /dev/input/event*\n"
-
-#define addgroup_trivial_usage \
- "[-g GID] " IF_FEATURE_ADDUSER_TO_GROUP("[USER] ") "GROUP"
-#define addgroup_full_usage "\n\n" \
- "Add a group " IF_FEATURE_ADDUSER_TO_GROUP("or add a user to a group") "\n" \
- "\nOptions:" \
- "\n -g GID Group id" \
- "\n -S Create a system group" \
-
-#define adduser_trivial_usage \
- "[OPTIONS] USER"
-#define adduser_full_usage "\n\n" \
- "Add a user\n" \
- "\nOptions:" \
- "\n -h DIR Home directory" \
- "\n -g GECOS GECOS field" \
- "\n -s SHELL Login shell" \
- "\n -G GRP Add user to existing group" \
- "\n -S Create a system user" \
- "\n -D Don't assign a password" \
- "\n -H Don't create home directory" \
- "\n -u UID User id" \
-
-#define adjtimex_trivial_usage \
- "[-q] [-o OFF] [-f FREQ] [-p TCONST] [-t TICK]"
-#define adjtimex_full_usage "\n\n" \
- "Read and optionally set system timebase parameters. See adjtimex(2)\n" \
- "\nOptions:" \
- "\n -q Quiet" \
- "\n -o OFF Time offset, microseconds" \
- "\n -f FREQ Frequency adjust, integer kernel units (65536 is 1ppm)" \
- "\n (positive values make clock run faster)" \
- "\n -t TICK Microseconds per tick, usually 10000" \
- "\n -p TCONST" \
-
-#define ar_trivial_usage \
- "[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES"
-#define ar_full_usage "\n\n" \
- "Extract or list FILES from an ar archive\n" \
- "\nOptions:" \
- "\n -o Preserve original dates" \
- "\n -p Extract to stdout" \
- "\n -t List" \
- "\n -x Extract" \
- "\n -v Verbose" \
-
-#define arp_trivial_usage \
- "\n[-vn] [-H HWTYPE] [-i IF] -a [HOSTNAME]" \
- "\n[-v] [-i IF] -d HOSTNAME [pub]" \
- "\n[-v] [-H HWTYPE] [-i IF] -s HOSTNAME HWADDR [temp]" \
- "\n[-v] [-H HWTYPE] [-i IF] -s HOSTNAME HWADDR [netmask MASK] pub" \
- "\n[-v] [-H HWTYPE] [-i IF] -Ds HOSTNAME IFACE [netmask MASK] pub"
-#define arp_full_usage "\n\n" \
- "Manipulate ARP cache\n" \
- "\nOptions:" \
- "\n -a Display (all) hosts" \
- "\n -s Set new ARP entry" \
- "\n -d Delete a specified entry" \
- "\n -v Verbose" \
- "\n -n Don't resolve names" \
- "\n -i IF Network interface" \
- "\n -D Read <hwaddr> from given device" \
- "\n -A, -p AF Protocol family" \
- "\n -H HWTYPE Hardware address type" \
-
-#define arping_trivial_usage \
- "[-fqbDUA] [-c CNT] [-w TIMEOUT] [-I IFACE] [-s SRC_IP] DST_IP"
-#define arping_full_usage "\n\n" \
- "Send ARP requests/replies\n" \
- "\nOptions:" \
- "\n -f Quit on first ARP reply" \
- "\n -q Quiet" \
- "\n -b Keep broadcasting, don't go unicast" \
- "\n -D Duplicated address detection mode" \
- "\n -U Unsolicited ARP mode, update your neighbors" \
- "\n -A ARP answer mode, update your neighbors" \
- "\n -c N Stop after sending N ARP requests" \
- "\n -w TIMEOUT Time to wait for ARP reply, seconds" \
- "\n -I IFACE Interface to use (default eth0)" \
- "\n -s SRC_IP Sender IP address" \
- "\n DST_IP Target IP address" \
-
-#define sh_trivial_usage NOUSAGE_STR
-#define sh_full_usage ""
-#define ash_trivial_usage NOUSAGE_STR
-#define ash_full_usage ""
-#define hush_trivial_usage NOUSAGE_STR
-#define hush_full_usage ""
-#define lash_trivial_usage NOUSAGE_STR
-#define lash_full_usage ""
-#define msh_trivial_usage NOUSAGE_STR
-#define msh_full_usage ""
-#define bash_trivial_usage NOUSAGE_STR
-#define bash_full_usage ""
-
-#define awk_trivial_usage \
- "[OPTIONS] [AWK_PROGRAM] [FILE]..."
-#define awk_full_usage "\n\n" \
- "Options:" \
- "\n -v VAR=VAL Set variable" \
- "\n -F SEP Use SEP as field separator" \
- "\n -f FILE Read program from FILE" \
-
-#define basename_trivial_usage \
- "FILE [SUFFIX]"
-#define basename_full_usage "\n\n" \
- "Strip directory path and .SUFFIX from FILE\n"
-#define basename_example_usage \
- "$ basename /usr/local/bin/foo\n" \
- "foo\n" \
- "$ basename /usr/local/bin/\n" \
- "bin\n" \
- "$ basename /foo/bar.txt .txt\n" \
- "bar"
-
-#define beep_trivial_usage \
- "-f FREQ -l LEN -d DELAY -r COUNT -n"
-#define beep_full_usage "\n\n" \
- "Options:" \
- "\n -f Frequency in Hz" \
- "\n -l Length in ms" \
- "\n -d Delay in ms" \
- "\n -r Repetitions" \
- "\n -n Start new tone" \
-
-#define blkid_trivial_usage \
- ""
-#define blkid_full_usage "\n\n" \
- "Print UUIDs of all filesystems"
-
-#define bootchartd_trivial_usage \
- "start [PROG ARGS]|stop|init"
-#define bootchartd_full_usage "\n\n" \
- "Create /var/log/bootchart.tgz with boot chart data\n" \
- "\nOptions:" \
- "\nstart: start background logging; with PROG, run PROG, then kill logging with USR1" \
- "\nstop: send USR1 to all bootchartd processes" \
- "\ninit: start background logging; stop when getty/xdm is seen (for init scripts)" \
- "\nUnder PID 1: as init, then exec $bootchart_init, /init, /sbin/init" \
-
-#define brctl_trivial_usage \
- "COMMAND [BRIDGE [INTERFACE]]"
-#define brctl_full_usage "\n\n" \
- "Manage ethernet bridges\n" \
- "\nCommands:" \
- IF_FEATURE_BRCTL_SHOW( \
- "\n show Show a list of bridges" \
- ) \
- "\n addbr BRIDGE Create BRIDGE" \
- "\n delbr BRIDGE Delete BRIDGE" \
- "\n addif BRIDGE IFACE Add IFACE to BRIDGE" \
- "\n delif BRIDGE IFACE Delete IFACE from BRIDGE" \
- IF_FEATURE_BRCTL_FANCY( \
- "\n setageing BRIDGE TIME Set ageing time" \
- "\n setfd BRIDGE TIME Set bridge forward delay" \
- "\n sethello BRIDGE TIME Set hello time" \
- "\n setmaxage BRIDGE TIME Set max message age" \
- "\n setpathcost BRIDGE COST Set path cost" \
- "\n setportprio BRIDGE PRIO Set port priority" \
- "\n setbridgeprio BRIDGE PRIO Set bridge priority" \
- "\n stp BRIDGE [1/yes/on|0/no/off] STP on/off" \
- ) \
-
-#define bzip2_trivial_usage \
- "[OPTIONS] [FILE]..."
-#define bzip2_full_usage "\n\n" \
- "Compress FILEs (or stdin) with bzip2 algorithm\n" \
- "\nOptions:" \
- "\n -1..9 Compression level" \
- "\n -d Decompress" \
- "\n -c Write to stdout" \
- "\n -f Force" \
-
-#define busybox_notes_usage \
- "Hello world!\n"
-
-#define lzop_trivial_usage \
- "[-cfvd123456789CF] [FILE]..."
-#define lzop_full_usage "\n\n" \
- "Options:" \
- "\n -1..9 Compression level" \
- "\n -d Decompress" \
- "\n -c Write to stdout" \
- "\n -f Force" \
- "\n -v Verbose" \
- "\n -F Don't store or verify checksum" \
- "\n -C Also write checksum of compressed block" \
-
-#define lzopcat_trivial_usage \
- "[-vCF] [FILE]..."
-#define lzopcat_full_usage "\n\n" \
- " -v Verbose" \
- "\n -F Don't store or verify checksum" \
-
-#define unlzop_trivial_usage \
- "[-cfvCF] [FILE]..."
-#define unlzop_full_usage "\n\n" \
- "Options:" \
- "\n -c Write to stdout" \
- "\n -f Force" \
- "\n -v Verbose" \
- "\n -F Don't store or verify checksum" \
-
-#define unlzma_trivial_usage \
- "[OPTIONS] [FILE]..."
-#define unlzma_full_usage "\n\n" \
- "Decompress FILE (or stdin)\n" \
- "\nOptions:" \
- "\n -c Write to stdout" \
- "\n -f Force" \
-
-#define lzma_trivial_usage \
- "-d [OPTIONS] [FILE]..."
-#define lzma_full_usage "\n\n" \
- "Decompress FILE (or stdin)\n" \
- "\nOptions:" \
- "\n -d Decompress" \
- "\n -c Write to stdout" \
- "\n -f Force" \
-
-#define lzcat_trivial_usage \
- "FILE"
-#define lzcat_full_usage "\n\n" \
- "Decompress to stdout"
-
-#define unxz_trivial_usage \
- "[OPTIONS] [FILE]..."
-#define unxz_full_usage "\n\n" \
- "Decompress FILE (or stdin)\n" \
- "\nOptions:" \
- "\n -c Write to stdout" \
- "\n -f Force" \
-
-#define xz_trivial_usage \
- "-d [OPTIONS] [FILE]..."
-#define xz_full_usage "\n\n" \
- "Decompress FILE (or stdin)\n" \
- "\nOptions:" \
- "\n -d Decompress" \
- "\n -c Write to stdout" \
- "\n -f Force" \
-
-#define xzcat_trivial_usage \
- "FILE"
-#define xzcat_full_usage "\n\n" \
- "Decompress to stdout"
-
-#define cal_trivial_usage \
- "[-jy] [[MONTH] YEAR]"
-#define cal_full_usage "\n\n" \
- "Display a calendar\n" \
- "\nOptions:" \
- "\n -j Use julian dates" \
- "\n -y Display the entire year" \
-
-#define cat_trivial_usage \
- "[FILE]..."
-#define cat_full_usage "\n\n" \
- "Concatenate FILEs and print them to stdout" \
-
-#define cat_example_usage \
- "$ cat /proc/uptime\n" \
- "110716.72 17.67"
-
-#define catv_trivial_usage \
- "[-etv] [FILE]..."
-#define catv_full_usage "\n\n" \
- "Display nonprinting characters as ^x or M-x\n" \
- "\nOptions:" \
- "\n -e End each line with $" \
- "\n -t Show tabs as ^I" \
- "\n -v Don't use ^x or M-x escapes" \
-
-#define chat_trivial_usage \
- "EXPECT [SEND [EXPECT [SEND...]]]"
-#define chat_full_usage "\n\n" \
- "Useful for interacting with a modem connected to stdin/stdout.\n" \
- "A script consists of one or more \"expect-send\" pairs of strings,\n" \
- "each pair is a pair of arguments. Example:\n" \
- "chat '' ATZ OK ATD123456 CONNECT '' ogin: pppuser word: ppppass '~'" \
-
-#define chattr_trivial_usage \
- "[-R] [-+=AacDdijsStTu] [-v VERSION] [FILE]..."
-#define chattr_full_usage "\n\n" \
- "Change file attributes on an ext2 fs\n" \
- "\nModifiers:" \
- "\n - Remove attributes" \
- "\n + Add attributes" \
- "\n = Set attributes" \
- "\nAttributes:" \
- "\n A Don't track atime" \
- "\n a Append mode only" \
- "\n c Enable compress" \
- "\n D Write dir contents synchronously" \
- "\n d Don't backup with dump" \
- "\n i Cannot be modified (immutable)" \
- "\n j Write all data to journal first" \
- "\n s Zero disk storage when deleted" \
- "\n S Write file contents synchronously" \
- "\n t Disable tail-merging of partial blocks with other files" \
- "\n u Allow file to be undeleted" \
- "\nOptions:" \
- "\n -R Recurse" \
- "\n -v Set the file's version/generation number" \
-
-#define chcon_trivial_usage \
- "[OPTIONS] CONTEXT FILE..." \
- "\n chcon [OPTIONS] [-u USER] [-r ROLE] [-l RANGE] [-t TYPE] FILE..." \
- IF_FEATURE_CHCON_LONG_OPTIONS( \
- "\n chcon [OPTIONS] --reference=RFILE FILE..." \
- )
-#define chcon_full_usage "\n\n" \
- "Change the security context of each FILE to CONTEXT\n" \
- IF_FEATURE_CHCON_LONG_OPTIONS( \
- "\n -v,--verbose Verbose" \
- "\n -c,--changes Report changes made" \
- "\n -h,--no-dereference Affect symlinks instead of their targets" \
- "\n -f,--silent,--quiet Suppress most error messages" \
- "\n --reference=RFILE Use RFILE's group instead of using a CONTEXT value" \
- "\n -u,--user=USER Set user/role/type/range in the target" \
- "\n -r,--role=ROLE security context" \
- "\n -t,--type=TYPE" \
- "\n -l,--range=RANGE" \
- "\n -R,--recursive Recurse" \
- ) \
- IF_NOT_FEATURE_CHCON_LONG_OPTIONS( \
- "\n -v Verbose" \
- "\n -c Report changes made" \
- "\n -h Affect symlinks instead of their targets" \
- "\n -f Suppress most error messages" \
- "\n -u USER Set user/role/type/range in the target security context" \
- "\n -r ROLE" \
- "\n -t TYPE" \
- "\n -l RNG" \
- "\n -R Recurse" \
- )
-
-#define chmod_trivial_usage \
- "[-R"IF_DESKTOP("cvf")"] MODE[,MODE]... FILE..."
-#define chmod_full_usage "\n\n" \
- "Each MODE is one or more of the letters ugoa, one of the\n" \
- "symbols +-= and one or more of the letters rwxst\n" \
- "\nOptions:" \
- "\n -R Recurse" \
- IF_DESKTOP( \
- "\n -c List changed files" \
- "\n -v List all files" \
- "\n -f Hide errors" \
- )
-#define chmod_example_usage \
- "$ ls -l /tmp/foo\n" \
- "-rw-rw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \
- "$ chmod u+x /tmp/foo\n" \
- "$ ls -l /tmp/foo\n" \
- "-rwxrw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo*\n" \
- "$ chmod 444 /tmp/foo\n" \
- "$ ls -l /tmp/foo\n" \
- "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
-
-#define chgrp_trivial_usage \
- "[-RhLHP"IF_DESKTOP("cvf")"]... GROUP FILE..."
-#define chgrp_full_usage "\n\n" \
- "Change the group membership of each FILE to GROUP\n" \
- "\nOptions:" \
- "\n -R Recurse" \
- "\n -h Affect symlinks instead of symlink targets" \
- "\n -L Traverse all symlinks to directories" \
- "\n -H Traverse symlinks on command line only" \
- "\n -P Don't traverse symlinks (default)" \
- IF_DESKTOP( \
- "\n -c List changed files" \
- "\n -v Verbose" \
- "\n -f Hide errors" \
- )
-#define chgrp_example_usage \
- "$ ls -l /tmp/foo\n" \
- "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
- "$ chgrp root /tmp/foo\n" \
- "$ ls -l /tmp/foo\n" \
- "-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n"
-
-#define chown_trivial_usage \
- "[-RhLHP"IF_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..."
-#define chown_full_usage "\n\n" \
- "Change the owner and/or group of each FILE to OWNER and/or GROUP\n" \
- "\nOptions:" \
- "\n -R Recurse" \
- "\n -h Affect symlinks instead of symlink targets" \
- "\n -L Traverse all symlinks to directories" \
- "\n -H Traverse symlinks on command line only" \
- "\n -P Don't traverse symlinks (default)" \
- IF_DESKTOP( \
- "\n -c List changed files" \
- "\n -v List all files" \
- "\n -f Hide errors" \
- )
-#define chown_example_usage \
- "$ ls -l /tmp/foo\n" \
- "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
- "$ chown root /tmp/foo\n" \
- "$ ls -l /tmp/foo\n" \
- "-r--r--r-- 1 root andersen 0 Apr 12 18:25 /tmp/foo\n" \
- "$ chown root.root /tmp/foo\n" \
- "ls -l /tmp/foo\n" \
- "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
-
-#define chpst_trivial_usage \
- "[-vP012] [-u USER[:GRP]] [-U USER[:GRP]] [-e DIR]\n" \
- " [-/ DIR] [-n NICE] [-m BYTES] [-d BYTES] [-o N]\n" \
- " [-p N] [-f BYTES] [-c BYTES] PROG ARGS"
-#define chpst_full_usage "\n\n" \
- "Change the process state and run PROG\n" \
- "\nOptions:" \
- "\n -u USER[:GRP] Set uid and gid" \
- "\n -U USER[:GRP] Set $UID and $GID in environment" \
- "\n -e DIR Set environment variables as specified by files" \
- "\n in DIR: file=1st_line_of_file" \
- "\n -/ DIR Chroot to DIR" \
- "\n -n NICE Add NICE to nice value" \
- "\n -m BYTES Same as -d BYTES -s BYTES -l BYTES" \
- "\n -d BYTES Limit data segment" \
- "\n -o N Limit number of open files per process" \
- "\n -p N Limit number of processes per uid" \
- "\n -f BYTES Limit output file sizes" \
- "\n -c BYTES Limit core file size" \
- "\n -v Verbose" \
- "\n -P Create new process group" \
- "\n -0 Close stdin" \
- "\n -1 Close stdout" \
- "\n -2 Close stderr" \
-
-#define setuidgid_trivial_usage \
- "USER PROG ARGS"
-#define setuidgid_full_usage "\n\n" \
- "Set uid and gid to USER's uid and gid, removing all supplementary\n" \
- "groups and run PROG"
-#define envuidgid_trivial_usage \
- "USER PROG ARGS"
-#define envuidgid_full_usage "\n\n" \
- "Set $UID to USER's uid and $GID to USER's gid and run PROG"
-#define envdir_trivial_usage \
- "DIR PROG ARGS"
-#define envdir_full_usage "\n\n" \
- "Set various environment variables as specified by files\n" \
- "in the directory dir and run PROG"
-#define softlimit_trivial_usage \
- "[-a BYTES] [-m BYTES] [-d BYTES] [-s BYTES] [-l BYTES]\n" \
- " [-f BYTES] [-c BYTES] [-r BYTES] [-o N] [-p N] [-t N]\n" \
- " PROG ARGS"
-#define softlimit_full_usage "\n\n" \
- "Set soft resource limits, then run PROG\n" \
- "\nOptions:" \
- "\n -a BYTES Limit total size of all segments" \
- "\n -m BYTES Same as -d BYTES -s BYTES -l BYTES -a BYTES" \
- "\n -d BYTES Limit data segment" \
- "\n -s BYTES Limit stack segment" \
- "\n -l BYTES Limit locked memory size" \
- "\n -o N Limit number of open files per process" \
- "\n -p N Limit number of processes per uid" \
- "\nOptions controlling file sizes:" \
- "\n -f BYTES Limit output file sizes" \
- "\n -c BYTES Limit core file size" \
- "\nEfficiency opts:" \
- "\n -r BYTES Limit resident set size" \
- "\n -t N Limit CPU time, process receives" \
- "\n a SIGXCPU after N seconds" \
-
-#define chroot_trivial_usage \
- "NEWROOT [PROG ARGS]"
-#define chroot_full_usage "\n\n" \
- "Run PROG with root directory set to NEWROOT"
-#define chroot_example_usage \
- "$ ls -l /bin/ls\n" \
- "lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \
- "# mount /dev/hdc1 /mnt -t minix\n" \
- "# chroot /mnt\n" \
- "# ls -l /bin/ls\n" \
- "-rwxr-xr-x 1 root root 40816 Feb 5 07:45 /bin/ls*\n"
-
-#define chvt_trivial_usage \
- "N"
-#define chvt_full_usage "\n\n" \
- "Change the foreground virtual terminal to /dev/ttyN"
-
-#define cksum_trivial_usage \
- "FILES..."
-#define cksum_full_usage "\n\n" \
- "Calculate the CRC32 checksums of FILES"
-
-#define clear_trivial_usage \
- ""
-#define clear_full_usage "\n\n" \
- "Clear screen"
-
-#define cmp_trivial_usage \
- "[-l] [-s] FILE1 [FILE2" IF_DESKTOP(" [SKIP1 [SKIP2]]") "]"
-#define cmp_full_usage "\n\n" \
- "Compare FILE1 with FILE2 (or stdin)\n" \
- "\nOptions:" \
- "\n -l Write the byte numbers (decimal) and values (octal)" \
- "\n for all differing bytes" \
- "\n -s Quiet" \
-
-#define comm_trivial_usage \
- "[-123] FILE1 FILE2"
-#define comm_full_usage "\n\n" \
- "Compare FILE1 with FILE2\n" \
- "\nOptions:" \
- "\n -1 Suppress lines unique to FILE1" \
- "\n -2 Suppress lines unique to FILE2" \
- "\n -3 Suppress lines common to both files" \
-
-#define bbconfig_trivial_usage \
- ""
-#define bbconfig_full_usage "\n\n" \
- "Print the config file which built busybox"
-
-#define chrt_trivial_usage \
- "[OPTIONS] [PRIO] [PID | PROG ARGS]"
-#define chrt_full_usage "\n\n" \
- "Manipulate real-time attributes of a process\n" \
- "\nOptions:" \
- "\n -p Operate on PID" \
- "\n -r Set SCHED_RR scheduling" \
- "\n -f Set SCHED_FIFO scheduling" \
- "\n -o Set SCHED_OTHER scheduling" \
- "\n -m Show min and max priorities" \
-
-#define chrt_example_usage \
- "$ chrt -r 4 sleep 900; x=$!\n" \
- "$ chrt -f -p 3 $x\n" \
- "You need CAP_SYS_NICE privileges to set scheduling attributes of a process"
-
-#define cp_trivial_usage \
- "[OPTIONS] SOURCE DEST"
-#define cp_full_usage "\n\n" \
- "Copy SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY\n" \
- "\nOptions:" \
- "\n -a Same as -dpR" \
- IF_SELINUX( \
- "\n -c Preserve security context" \
- ) \
- "\n -R,-r Recurse" \
- "\n -d,-P Preserve symlinks (default if -R)" \
- "\n -L Follow all symlinks" \
- "\n -H Follow symlinks on command line" \
- "\n -p Preserve file attributes if possible" \
- "\n -f Overwrite" \
- "\n -i Prompt before overwrite" \
- "\n -l,-s Create (sym)links" \
-
-#define cpio_trivial_usage \
- "[-dmvu] [-F FILE]" IF_FEATURE_CPIO_O(" [-H newc]") \
- " [-ti"IF_FEATURE_CPIO_O("o")"]" IF_FEATURE_CPIO_P(" [-p DIR]")
-#define cpio_full_usage "\n\n" \
- "Extract or list files from a cpio archive" \
- IF_FEATURE_CPIO_O(", or" \
- "\ncreate an archive" IF_FEATURE_CPIO_P(" (-o) or copy files (-p)") \
- " using file list on stdin" \
- ) \
- "\n" \
- "\nMain operation mode:" \
- "\n -t List" \
- "\n -i Extract" \
- IF_FEATURE_CPIO_O( \
- "\n -o Create (requires -H newc)" \
- ) \
- IF_FEATURE_CPIO_P( \
- "\n -p DIR Copy files to DIR" \
- ) \
- "\nOptions:" \
- "\n -d Make leading directories" \
- "\n -m Preserve mtime" \
- "\n -v Verbose" \
- "\n -u Overwrite" \
- "\n -F FILE Input (-t,-i,-p) or output (-o) file" \
- IF_FEATURE_CPIO_O( \
- "\n -H newc Archive format" \
- ) \
-
-#define crond_trivial_usage \
- "-fbS -l N " IF_FEATURE_CROND_D("-d N ") "-L LOGFILE -c DIR"
-#define crond_full_usage "\n\n" \
- " -f Foreground" \
- "\n -b Background (default)" \
- "\n -S Log to syslog (default)" \
- "\n -l Set log level. 0 is the most verbose, default 8" \
- IF_FEATURE_CROND_D( \
- "\n -d Set log level, log to stderr" \
- ) \
- "\n -L Log to file" \
- "\n -c Working dir" \
-
-#define crontab_trivial_usage \
- "[-c DIR] [-u USER] [-ler]|[FILE]"
-#define crontab_full_usage "\n\n" \
- " -c Crontab directory" \
- "\n -u User" \
- "\n -l List crontab" \
- "\n -e Edit crontab" \
- "\n -r Delete crontab" \
- "\n FILE Replace crontab by FILE ('-': stdin)" \
-
-#define cryptpw_trivial_usage \
- "[OPTIONS] [PASSWORD] [SALT]"
-/* We do support -s, we just don't mention it */
-#define cryptpw_full_usage "\n\n" \
- "Crypt the PASSWORD using crypt(3)\n" \
- "\nOptions:" \
- IF_LONG_OPTS( \
- "\n -P,--password-fd=N Read password from fd N" \
-/* "\n -s,--stdin Use stdin; like -P0" */ \
- "\n -m,--method=TYPE Encryption method TYPE" \
- "\n -S,--salt=SALT" \
- ) \
- IF_NOT_LONG_OPTS( \
- "\n -P N Read password from fd N" \
-/* "\n -s Use stdin; like -P0" */ \
- "\n -m TYPE Encryption method TYPE" \
- "\n -S SALT" \
- ) \
-
-/* mkpasswd is an alias to cryptpw */
-
-#define mkpasswd_trivial_usage \
- "[OPTIONS] [PASSWORD] [SALT]"
-/* We do support -s, we just don't mention it */
-#define mkpasswd_full_usage "\n\n" \
- "Crypt the PASSWORD using crypt(3)\n" \
- "\nOptions:" \
- IF_LONG_OPTS( \
- "\n -P,--password-fd=N Read password from fd N" \
-/* "\n -s,--stdin Use stdin; like -P0" */ \
- "\n -m,--method=TYPE Encryption method TYPE" \
- "\n -S,--salt=SALT" \
- ) \
- IF_NOT_LONG_OPTS( \
- "\n -P N Read password from fd N" \
-/* "\n -s Use stdin; like -P0" */ \
- "\n -m TYPE Encryption method TYPE" \
- "\n -S SALT" \
- ) \
-
-#define cttyhack_trivial_usage \
- "PROG ARGS"
-#define cttyhack_full_usage "\n\n" \
- "Give PROG a controlling tty if possible." \
- "\nExample for /etc/inittab (for busybox init):" \
- "\n ::respawn:/bin/cttyhack /bin/sh" \
- "\nGiving controlling tty to shell running with PID 1:" \
- "\n $ exec cttyhack sh" \
- "\nStarting interactive shell from boot shell script:" \
- "\n setsid cttyhack sh" \
-
-#define cut_trivial_usage \
- "[OPTIONS] [FILE]..."
-#define cut_full_usage "\n\n" \
- "Print selected fields from each input FILE to stdout\n" \
- "\nOptions:" \
- "\n -b LIST Output only bytes from LIST" \
- "\n -c LIST Output only characters from LIST" \
- "\n -d CHAR Use CHAR instead of tab as the field delimiter" \
- "\n -s Output only the lines containing delimiter" \
- "\n -f N Print only these fields" \
- "\n -n Ignored" \
-
-#define cut_example_usage \
- "$ echo \"Hello world\" | cut -f 1 -d ' '\n" \
- "Hello\n" \
- "$ echo \"Hello world\" | cut -f 2 -d ' '\n" \
- "world\n"
-
-#define date_trivial_usage \
- "[OPTIONS] [+FMT] [TIME]"
-#define date_full_usage "\n\n" \
- "Display time (using +FMT), or set time\n" \
- "\nOptions:" \
- IF_NOT_LONG_OPTS( \
- "\n [-s] TIME Set time to TIME" \
- "\n -u Work in UTC (don't convert to local time)" \
- "\n -R Output RFC-2822 compliant date string" \
- ) IF_LONG_OPTS( \
- "\n [-s,--set] TIME Set time to TIME" \
- "\n -u,--utc Work in UTC (don't convert to local time)" \
- "\n -R,--rfc-2822 Output RFC-2822 compliant date string" \
- ) \
- IF_FEATURE_DATE_ISOFMT( \
- "\n -I[SPEC] Output ISO-8601 compliant date string" \
- "\n SPEC='date' (default) for date only," \
- "\n 'hours', 'minutes', or 'seconds' for date and" \
- "\n time to the indicated precision" \
- ) IF_NOT_LONG_OPTS( \
- "\n -r FILE Display last modification time of FILE" \
- "\n -d TIME Display TIME, not 'now'" \
- ) IF_LONG_OPTS( \
- "\n -r,--reference FILE Display last modification time of FILE" \
- "\n -d,--date TIME Display TIME, not 'now'" \
- ) \
- IF_FEATURE_DATE_ISOFMT( \
- "\n -D FMT Use FMT for -d TIME conversion" \
- ) \
- "\n" \
- "\nRecognized TIME formats:" \
- "\n hh:mm[:ss]" \
- "\n [YYYY.]MM.DD-hh:mm[:ss]" \
- "\n YYYY-MM-DD hh:mm[:ss]" \
- "\n [[[[[YY]YY]MM]DD]hh]mm[.ss]" \
-
-#define date_example_usage \
- "$ date\n" \
- "Wed Apr 12 18:52:41 MDT 2000\n"
-
-#define dc_trivial_usage \
- "expression..."
-#define dc_full_usage "\n\n" \
- "Tiny RPN calculator. Operations:\n" \
- "+, add, -, sub, *, mul, /, div, %, mod, **, exp, and, or, not, eor,\n" \
- "p - print top of the stack (without altering the stack),\n" \
- "f - print entire stack, o - pop the value and set output radix\n" \
- "(value must be 10 or 16).\n" \
- "Examples: 'dc 2 2 add' -> 4, 'dc 8 8 * 2 2 + /' -> 16\n" \
-
-#define dc_example_usage \
- "$ dc 2 2 + p\n" \
- "4\n" \
- "$ dc 8 8 \\* 2 2 + / p\n" \
- "16\n" \
- "$ dc 0 1 and p\n" \
- "0\n" \
- "$ dc 0 1 or p\n" \
- "1\n" \
- "$ echo 72 9 div 8 mul p | dc\n" \
- "64\n"
-
-#define dd_trivial_usage \
- "[if=FILE] [of=FILE] " IF_FEATURE_DD_IBS_OBS("[ibs=N] [obs=N] ") "[bs=N] [count=N] [skip=N]\n" \
- " [seek=N]" IF_FEATURE_DD_IBS_OBS(" [conv=notrunc|noerror|sync|fsync]")
-#define dd_full_usage "\n\n" \
- "Copy a file with converting and formatting\n" \
- "\nOptions:" \
- "\n if=FILE Read from FILE instead of stdin" \
- "\n of=FILE Write to FILE instead of stdout" \
- "\n bs=N Read and write N bytes at a time" \
- IF_FEATURE_DD_IBS_OBS( \
- "\n ibs=N Read N bytes at a time" \
- ) \
- IF_FEATURE_DD_IBS_OBS( \
- "\n obs=N Write N bytes at a time" \
- ) \
- "\n count=N Copy only N input blocks" \
- "\n skip=N Skip N input blocks" \
- "\n seek=N Skip N output blocks" \
- IF_FEATURE_DD_IBS_OBS( \
- "\n conv=notrunc Don't truncate output file" \
- "\n conv=noerror Continue after read errors" \
- "\n conv=sync Pad blocks with zeros" \
- "\n conv=fsync Physically write data out before finishing" \
- ) \
- "\n" \
- "\nNumbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024)," \
- "\nMD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)" \
-
-#define dd_example_usage \
- "$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \
- "4+0 records in\n" \
- "4+0 records out\n"
-
-#define deallocvt_trivial_usage \
- "[N]"
-#define deallocvt_full_usage "\n\n" \
- "Deallocate unused virtual terminal /dev/ttyN"
-
-#define delgroup_trivial_usage \
- IF_FEATURE_DEL_USER_FROM_GROUP("[USER] ")"GROUP"
-#define delgroup_full_usage "\n\n" \
- "Delete group GROUP from the system" \
- IF_FEATURE_DEL_USER_FROM_GROUP(" or user USER from group GROUP")
-
-#define deluser_trivial_usage \
- "USER"
-#define deluser_full_usage "\n\n" \
- "Delete USER from the system"
-
-#define depmod_trivial_usage NOUSAGE_STR
-#define depmod_full_usage ""
-
-#define devmem_trivial_usage \
- "ADDRESS [WIDTH [VALUE]]"
-
-#define devmem_full_usage "\n\n" \
- "Read/write from physical address\n" \
- "\n ADDRESS Address to act upon" \
- "\n WIDTH Width (8/16/...)" \
- "\n VALUE Data to be written" \
-
-#define devfsd_trivial_usage \
- "mntpnt [-v]" IF_DEVFSD_FG_NP("[-fg][-np]")
-#define devfsd_full_usage "\n\n" \
- "Manage devfs permissions and old device name symlinks\n" \
- "\nOptions:" \
- "\n mntpnt The mount point where devfs is mounted" \
- "\n -v Print the protocol version numbers for devfsd" \
- "\n and the kernel-side protocol version and exit" \
- IF_DEVFSD_FG_NP( \
- "\n -fg Run in foreground" \
- "\n -np Exit after parsing the configuration file" \
- "\n and processing synthetic REGISTER events," \
- "\n don't poll for events" \
- )
-
-#define df_trivial_usage \
- "[-Pk" \
- IF_FEATURE_HUMAN_READABLE("mh") \
- IF_FEATURE_DF_FANCY("ai] [-B SIZE") \
- "] [FILESYSTEM]..."
-#define df_full_usage "\n\n" \
- "Print filesystem usage statistics\n" \
- "\nOptions:" \
- "\n -P POSIX output format" \
- "\n -k 1024-byte blocks (default)" \
- IF_FEATURE_HUMAN_READABLE( \
- "\n -m 1M-byte blocks" \
- "\n -h Human readable (e.g. 1K 243M 2G)" \
- ) \
- IF_FEATURE_DF_FANCY( \
- "\n -a Show all filesystems" \
- "\n -i Inodes" \
- "\n -B SIZE Blocksize" \
- ) \
-
-#define df_example_usage \
- "$ df\n" \
- "Filesystem 1K-blocks Used Available Use% Mounted on\n" \
- "/dev/sda3 8690864 8553540 137324 98% /\n" \
- "/dev/sda1 64216 36364 27852 57% /boot\n" \
- "$ df /dev/sda3\n" \
- "Filesystem 1K-blocks Used Available Use% Mounted on\n" \
- "/dev/sda3 8690864 8553540 137324 98% /\n" \
- "$ POSIXLY_CORRECT=sure df /dev/sda3\n" \
- "Filesystem 512B-blocks Used Available Use% Mounted on\n" \
- "/dev/sda3 17381728 17107080 274648 98% /\n" \
- "$ POSIXLY_CORRECT=yep df -P /dev/sda3\n" \
- "Filesystem 512-blocks Used Available Capacity Mounted on\n" \
- "/dev/sda3 17381728 17107080 274648 98% /\n"
-
-#define dhcprelay_trivial_usage \
- "CLIENT_IFACE[,CLIENT_IFACE2]... SERVER_IFACE [SERVER_IP]"
-#define dhcprelay_full_usage "\n\n" \
- "Relay DHCP requests between clients and server" \
-
-#define diff_trivial_usage \
- "[-abBdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2"
-#define diff_full_usage "\n\n" \
- "Compare files line by line and output the differences between them.\n" \
- "This implementation supports unified diffs only.\n" \
- "\nOptions:" \
- "\n -a Treat all files as text" \
- "\n -b Ignore changes in the amount of whitespace" \
- "\n -B Ignore changes whose lines are all blank" \
- "\n -d Try hard to find a smaller set of changes" \
- "\n -i Ignore case differences" \
- "\n -L Use LABEL instead of the filename in the unified header" \
- "\n -N Treat absent files as empty" \
- "\n -q Output only whether files differ" \
- "\n -r Recurse" \
- "\n -S Start with FILE when comparing directories" \
- "\n -T Make tabs line up by prefixing a tab when necessary" \
- "\n -s Report when two files are the same" \
- "\n -t Expand tabs to spaces in output" \
- "\n -U Output LINES lines of context" \
- "\n -w Ignore all whitespace" \
-
-#define dirname_trivial_usage \
- "FILENAME"
-#define dirname_full_usage "\n\n" \
- "Strip non-directory suffix from FILENAME"
-#define dirname_example_usage \
- "$ dirname /tmp/foo\n" \
- "/tmp\n" \
- "$ dirname /tmp/foo/\n" \
- "/tmp\n"
-
-#define dmesg_trivial_usage \
- "[-c] [-n LEVEL] [-s SIZE]"
-#define dmesg_full_usage "\n\n" \
- "Print or control the kernel ring buffer\n" \
- "\nOptions:" \
- "\n -c Clear ring buffer after printing" \
- "\n -n LEVEL Set console logging level" \
- "\n -s SIZE Buffer size" \
-
-#define dnsd_trivial_usage \
- "[-dvs] [-c CONFFILE] [-t TTL_SEC] [-p PORT] [-i ADDR]"
-#define dnsd_full_usage "\n\n" \
- "Small static DNS server daemon\n" \
- "\nOptions:" \
- "\n -c FILE Config file" \
- "\n -t SEC TTL" \
- "\n -p PORT Listen on PORT" \
- "\n -i ADDR Listen on ADDR" \
- "\n -d Daemonize" \
- "\n -v Verbose" \
- "\n -s Send successful replies only. Use this if you want" \
- "\n to use /etc/resolv.conf with two nameserver lines:" \
- "\n nameserver DNSD_SERVER" \
- "\n nameserver NORNAL_DNS_SERVER" \
-
-#define dos2unix_trivial_usage \
- "[OPTIONS] [FILE]"
-#define dos2unix_full_usage "\n\n" \
- "Convert FILE in-place from DOS to Unix format.\n" \
- "When no file is given, use stdin/stdout.\n" \
- "\nOptions:" \
- "\n -u dos2unix" \
- "\n -d unix2dos" \
-
-#define unix2dos_trivial_usage \
- "[OPTIONS] [FILE]"
-#define unix2dos_full_usage "\n\n" \
- "Convert FILE in-place from Unix to DOS format.\n" \
- "When no file is given, use stdin/stdout.\n" \
- "\nOptions:" \
- "\n -u dos2unix" \
- "\n -d unix2dos" \
-
-#define dpkg_trivial_usage \
- "[-ilCPru] [-F OPT] PACKAGE"
-#define dpkg_full_usage "\n\n" \
- "Install, remove and manage Debian packages\n" \
- "\nOptions:" \
- IF_LONG_OPTS( \
- "\n -i,--install Install the package" \
- "\n -l,--list List of installed packages" \
- "\n --configure Configure an unpackaged package" \
- "\n -P,--purge Purge all files of a package" \
- "\n -r,--remove Remove all but the configuration files for a package" \
- "\n --unpack Unpack a package, but don't configure it" \
- "\n --force-depends Ignore dependency problems" \
- "\n --force-confnew Overwrite existing config files when installing" \
- "\n --force-confold Keep old config files when installing" \
- ) \
- IF_NOT_LONG_OPTS( \
- "\n -i Install the package" \
- "\n -l List of installed packages" \
- "\n -C Configure an unpackaged package" \
- "\n -P Purge all files of a package" \
- "\n -r Remove all but the configuration files for a package" \
- "\n -u Unpack a package, but don't configure it" \
- "\n -F depends Ignore dependency problems" \
- "\n -F confnew Overwrite existing config files when installing" \
- "\n -F confold Keep old config files when installing" \
- )
-
-#define dpkg_deb_trivial_usage \
- "[-cefxX] FILE [argument]"
-#define dpkg_deb_full_usage "\n\n" \
- "Perform actions on Debian packages (.debs)\n" \
- "\nOptions:" \
- "\n -c List contents of filesystem tree" \
- "\n -e Extract control files to [argument] directory" \
- "\n -f Display control field name starting with [argument]" \
- "\n -x Extract packages filesystem tree to directory" \
- "\n -X Verbose extract" \
-
-#define dpkg_deb_example_usage \
- "$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n"
-
-#define du_trivial_usage \
- "[-aHLdclsx" IF_FEATURE_HUMAN_READABLE("hm") "k] [FILE]..."
-#define du_full_usage "\n\n" \
- "Summarize disk space used for each FILE and/or directory.\n" \
- "Disk space is printed in units of " \
- IF_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("1024") \
- IF_NOT_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("512") \
- " bytes.\n" \
- "\nOptions:" \
- "\n -a Show file sizes too" \
- "\n -L Follow all symlinks" \
- "\n -H Follow symlinks on command line" \
- "\n -d N Limit output to directories (and files with -a) of depth < N" \
- "\n -c Show grand total" \
- "\n -l Count sizes many times if hard linked" \
- "\n -s Display only a total for each argument" \
- "\n -x Skip directories on different filesystems" \
- IF_FEATURE_HUMAN_READABLE( \
- "\n -h Sizes in human readable format (e.g., 1K 243M 2G )" \
- "\n -m Sizes in megabytes" \
- ) \
- "\n -k Sizes in kilobytes" \
- IF_FEATURE_DU_DEFAULT_BLOCKSIZE_1K(" (default)") \
-
-#define du_example_usage \
- "$ du\n" \
- "16 ./CVS\n" \
- "12 ./kernel-patches/CVS\n" \
- "80 ./kernel-patches\n" \
- "12 ./tests/CVS\n" \
- "36 ./tests\n" \
- "12 ./scripts/CVS\n" \
- "16 ./scripts\n" \
- "12 ./docs/CVS\n" \
- "104 ./docs\n" \
- "2417 .\n"
-
-#define dumpkmap_trivial_usage \
- "> keymap"
-#define dumpkmap_full_usage "\n\n" \
- "Print a binary keyboard translation table to stdout"
-#define dumpkmap_example_usage \
- "$ dumpkmap > keymap\n"
-
-#define dumpleases_trivial_usage \
- "[-r|-a] [-f LEASEFILE]"
-#define dumpleases_full_usage "\n\n" \
- "Display DHCP leases granted by udhcpd\n" \
- "\nOptions:" \
- IF_LONG_OPTS( \
- "\n -f,--file=FILE Lease file" \
- "\n -r,--remaining Show remaining time" \
- "\n -a,--absolute Show expiration time" \
- ) \
- IF_NOT_LONG_OPTS( \
- "\n -f FILE Lease file" \
- "\n -r Show remaining time" \
- "\n -a Show expiration time" \
- )
-
-/*
-#define e2fsck_trivial_usage \
- "[-panyrcdfvstDFSV] [-b superblock] [-B blocksize] " \
- "[-I inode_buffer_blocks] [-P process_inode_size] " \
- "[-l|-L bad_blocks_file] [-C fd] [-j external_journal] " \
- "[-E extended-options] device"
-#define e2fsck_full_usage "\n\n" \
- "Check ext2/ext3 file system\n" \
- "\nOptions:" \
- "\n -p Automatic repair (no questions)" \
- "\n -n Make no changes to the filesystem" \
- "\n -y Assume 'yes' to all questions" \
- "\n -c Check for bad blocks and add them to the badblock list" \
- "\n -f Force checking even if filesystem is marked clean" \
- "\n -v Verbose" \
- "\n -b superblock Use alternative superblock" \
- "\n -B blocksize Force blocksize when looking for superblock" \
- "\n -j journal Set location of the external journal" \
- "\n -l file Add to badblocks list" \
- "\n -L file Set badblocks list" \
-*/
-
-#define echo_trivial_usage \
- IF_FEATURE_FANCY_ECHO("[-neE] ") "[ARG]..."
-#define echo_full_usage "\n\n" \
- "Print the specified ARGs to stdout" \
- IF_FEATURE_FANCY_ECHO( "\n" \
- "\nOptions:" \
- "\n -n Suppress trailing newline" \
- "\n -e Interpret backslash escapes (i.e., \\t=tab)" \
- "\n -E Don't interpret backslash escapes (default)" \
- )
-#define echo_example_usage \
- "$ echo \"Erik is cool\"\n" \
- "Erik is cool\n" \
- IF_FEATURE_FANCY_ECHO("$ echo -e \"Erik\\nis\\ncool\"\n" \
- "Erik\n" \
- "is\n" \
- "cool\n" \
- "$ echo \"Erik\\nis\\ncool\"\n" \
- "Erik\\nis\\ncool\n")
-
-#define eject_trivial_usage \
- "[-t] [-T] [DEVICE]"
-#define eject_full_usage "\n\n" \
- "Eject DEVICE or default /dev/cdrom\n" \
- "\nOptions:" \
- IF_FEATURE_EJECT_SCSI( \
- "\n -s SCSI device" \
- ) \
- "\n -t Close tray" \
- "\n -T Open/close tray (toggle)" \
-
-#define ed_trivial_usage ""
-#define ed_full_usage ""
-
-#define env_trivial_usage \
- "[-iu] [-] [name=value]... [PROG ARGS]"
-#define env_full_usage "\n\n" \
- "Print the current environment or run PROG after setting up\n" \
- "the specified environment\n" \
- "\nOptions:" \
- "\n -, -i Start with an empty environment" \
- "\n -u Remove variable from the environment" \
-
-#define ether_wake_trivial_usage \
- "[-b] [-i iface] [-p aa:bb:cc:dd[:ee:ff]] MAC"
-#define ether_wake_full_usage "\n\n" \
- "Send a magic packet to wake up sleeping machines.\n" \
- "MAC must be a station address (00:11:22:33:44:55) or\n" \
- "a hostname with a known 'ethers' entry.\n" \
- "\nOptions:" \
- "\n -b Send wake-up packet to the broadcast address" \
- "\n -i iface Interface to use (default eth0)" \
- "\n -p pass Append four or six byte password PW to the packet" \
-
-#define expand_trivial_usage \
- "[-i] [-t N] [FILE]..."
-#define expand_full_usage "\n\n" \
- "Convert tabs to spaces, writing to stdout\n" \
- "\nOptions:" \
- IF_FEATURE_EXPAND_LONG_OPTIONS( \
- "\n -i,--initial Don't convert tabs after non blanks" \
- "\n -t,--tabs=N Tabstops every N chars" \
- ) \
- IF_NOT_FEATURE_EXPAND_LONG_OPTIONS( \
- "\n -i Don't convert tabs after non blanks" \
- "\n -t Tabstops every N chars" \
- )
-
-#define expr_trivial_usage \
- "EXPRESSION"
-#define expr_full_usage "\n\n" \
- "Print the value of EXPRESSION to stdout\n" \
- "\n" \
- "EXPRESSION may be:\n" \
- " ARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \
- " ARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \
- " ARG1 < ARG2 1 if ARG1 is less than ARG2, else 0. Similarly:\n" \
- " ARG1 <= ARG2\n" \
- " ARG1 = ARG2\n" \
- " ARG1 != ARG2\n" \
- " ARG1 >= ARG2\n" \
- " ARG1 > ARG2\n" \
- " ARG1 + ARG2 Sum of ARG1 and ARG2. Similarly:\n" \
- " ARG1 - ARG2\n" \
- " ARG1 * ARG2\n" \
- " ARG1 / ARG2\n" \
- " ARG1 % ARG2\n" \
- " STRING : REGEXP Anchored pattern match of REGEXP in STRING\n" \
- " match STRING REGEXP Same as STRING : REGEXP\n" \
- " substr STRING POS LENGTH Substring of STRING, POS counted from 1\n" \
- " index STRING CHARS Index in STRING where any CHARS is found, or 0\n" \
- " length STRING Length of STRING\n" \
- " quote TOKEN Interpret TOKEN as a string, even if\n" \
- " it is a keyword like 'match' or an\n" \
- " operator like '/'\n" \
- " (EXPRESSION) Value of EXPRESSION\n" \
- "\n" \
- "Beware that many operators need to be escaped or quoted for shells.\n" \
- "Comparisons are arithmetic if both ARGs are numbers, else\n" \
- "lexicographical. Pattern matches return the string matched between\n" \
- "\\( and \\) or null; if \\( and \\) are not used, they return the number\n" \
- "of characters matched or 0."
-
-#define fakeidentd_trivial_usage \
- "[-fiw] [-b ADDR] [STRING]"
-#define fakeidentd_full_usage "\n\n" \
- "Provide fake ident (auth) service\n" \
- "\nOptions:" \
- "\n -f Run in foreground" \
- "\n -i Inetd mode" \
- "\n -w Inetd 'wait' mode" \
- "\n -b ADDR Bind to specified address" \
- "\n STRING Ident answer string (default: nobody)" \
-
-#define false_trivial_usage \
- ""
-#define false_full_usage "\n\n" \
- "Return an exit code of FALSE (1)"
-
-#define false_example_usage \
- "$ false\n" \
- "$ echo $?\n" \
- "1\n"
-
-#define fbsplash_trivial_usage \
- "-s IMGFILE [-c] [-d DEV] [-i INIFILE] [-f CMD]"
-#define fbsplash_full_usage "\n\n" \
- "Options:" \
- "\n -s Image" \
- "\n -c Hide cursor" \
- "\n -d Framebuffer device (default /dev/fb0)" \
- "\n -i Config file (var=value):" \
- "\n BAR_LEFT,BAR_TOP,BAR_WIDTH,BAR_HEIGHT" \
- "\n BAR_R,BAR_G,BAR_B" \
- "\n -f Control pipe (else exit after drawing image)" \
- "\n commands: 'NN' (% for progress bar) or 'exit'" \
-
-#define fbset_trivial_usage \
- "[OPTIONS] [MODE]"
-#define fbset_full_usage "\n\n" \
- "Show and modify frame buffer settings"
-
-#define fbset_example_usage \
- "$ fbset\n" \
- "mode \"1024x768-76\"\n" \
- " # D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" \
- " geometry 1024 768 1024 768 16\n" \
- " timings 12714 128 32 16 4 128 4\n" \
- " accel false\n" \
- " rgba 5/11,6/5,5/0,0/0\n" \
- "endmode\n"
-
-#define fdflush_trivial_usage \
- "DEVICE"
-#define fdflush_full_usage "\n\n" \
- "Force floppy disk drive to detect disk change"
-
-#define fdformat_trivial_usage \
- "[-n] DEVICE"
-#define fdformat_full_usage "\n\n" \
- "Format floppy disk\n" \
- "\nOptions:" \
- "\n -n Don't verify after format" \
-
-/* Looks like someone forgot to add this to config system */
-#ifndef ENABLE_FEATURE_FDISK_BLKSIZE
-# define ENABLE_FEATURE_FDISK_BLKSIZE 0
-# define IF_FEATURE_FDISK_BLKSIZE(a)
-#endif
-
-#define fdisk_trivial_usage \
- "[-ul" IF_FEATURE_FDISK_BLKSIZE("s") "] " \
- "[-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK"
-#define fdisk_full_usage "\n\n" \
- "Change partition table\n" \
- "\nOptions:" \
- "\n -u Start and End are in sectors (instead of cylinders)" \
- "\n -l Show partition table for each DISK, then exit" \
- IF_FEATURE_FDISK_BLKSIZE( \
- "\n -s Show partition sizes in kb for each DISK, then exit" \
- ) \
- "\n -b 2048 (for certain MO disks) use 2048-byte sectors" \
- "\n -C CYLINDERS Set number of cylinders/heads/sectors" \
- "\n -H HEADS" \
- "\n -S SECTORS" \
-
-#define fgconsole_trivial_usage \
- ""
-#define fgconsole_full_usage "\n\n" \
- "Get active console"
-
-#define findfs_trivial_usage \
- "LABEL=label or UUID=uuid"
-#define findfs_full_usage "\n\n" \
- "Find a filesystem device based on a label or UUID"
-#define findfs_example_usage \
- "$ findfs LABEL=MyDevice"
-
-#define find_trivial_usage \
- "[PATH]... [EXPRESSION]"
-#define find_full_usage "\n\n" \
- "Search for files. The default PATH is the current directory,\n" \
- "default EXPRESSION is '-print'\n" \
- "\nEXPRESSION may consist of:" \
- "\n -follow Follow symlinks" \
- IF_FEATURE_FIND_XDEV( \
- "\n -xdev Don't descend directories on other filesystems") \
- IF_FEATURE_FIND_MAXDEPTH( \
- "\n -maxdepth N Descend at most N levels. -maxdepth 0 applies" \
- "\n tests/actions to command line arguments only") \
- "\n -mindepth N Don't act on first N levels" \
- "\n -name PATTERN File name (w/o directory name) matches PATTERN" \
- "\n -iname PATTERN Case insensitive -name" \
- IF_FEATURE_FIND_PATH( \
- "\n -path PATTERN Path matches PATTERN") \
- IF_FEATURE_FIND_REGEX( \
- "\n -regex PATTERN Path matches regex PATTERN") \
- IF_FEATURE_FIND_TYPE( \
- "\n -type X File type is X (X is one of: f,d,l,b,c,...)") \
- IF_FEATURE_FIND_PERM( \
- "\n -perm NNN Permissions match any of (+NNN), all of (-NNN)," \
- "\n or exactly NNN") \
- IF_FEATURE_FIND_MTIME( \
- "\n -mtime DAYS Modified time is greater than (+N), less than (-N)," \
- "\n or exactly N days") \
- IF_FEATURE_FIND_MMIN( \
- "\n -mmin MINS Modified time is greater than (+N), less than (-N)," \
- "\n or exactly N minutes") \
- IF_FEATURE_FIND_NEWER( \
- "\n -newer FILE Modified time is more recent than FILE's") \
- IF_FEATURE_FIND_INUM( \
- "\n -inum N File has inode number N") \
- IF_FEATURE_FIND_USER( \
- "\n -user NAME File is owned by user NAME (numeric user ID allowed)") \
- IF_FEATURE_FIND_GROUP( \
- "\n -group NAME File belongs to group NAME (numeric group ID allowed)") \
- IF_FEATURE_FIND_DEPTH( \
- "\n -depth Process directory name after traversing it") \
- IF_FEATURE_FIND_SIZE( \
- "\n -size N[bck] File size is N (c:bytes,k:kbytes,b:512 bytes(def.))" \
- "\n +/-N: file size is bigger/smaller than N") \
- IF_FEATURE_FIND_LINKS( \
- "\n -links N Number of links is greater than (+N), less than (-N)," \
- "\n or exactly N") \
- "\n -print Print (default and assumed)" \
- IF_FEATURE_FIND_PRINT0( \
- "\n -print0 Delimit output with null characters rather than" \
- "\n newlines") \
- IF_FEATURE_FIND_CONTEXT ( \
- "\n -context File has specified security context") \
- IF_FEATURE_FIND_EXEC( \
- "\n -exec CMD ARG ; Run CMD with all instances of {} replaced by the" \
- "\n matching files") \
- IF_FEATURE_FIND_PRUNE( \
- "\n -prune Stop traversing current subtree") \
- IF_FEATURE_FIND_DELETE( \
- "\n -delete Delete files, turns on -depth option") \
- IF_FEATURE_FIND_PAREN( \
- "\n (EXPR) Group an expression") \
-
-#define find_example_usage \
- "$ find / -name passwd\n" \
- "/etc/passwd\n"
-
-#define flash_lock_trivial_usage \
- "MTD_DEVICE OFFSET SECTORS"
-#define flash_lock_full_usage "\n\n" \
- "Lock part or all of an MTD device. If SECTORS is -1, then all sectors\n" \
- "will be locked, regardless of the value of OFFSET"
-
-#define flash_unlock_trivial_usage \
- "MTD_DEVICE"
-#define flash_unlock_full_usage "\n\n" \
- "Unlock an MTD device"
-
-#define flash_eraseall_trivial_usage \
- "[-jq] MTD_DEVICE"
-#define flash_eraseall_full_usage "\n\n" \
- "Erase an MTD device\n" \
- "\nOptions:" \
- "\n -j Format the device for jffs2" \
- "\n -q Don't display progress messages" \
-
-#define flashcp_trivial_usage \
- "-v FILE MTD_DEVICE"
-#define flashcp_full_usage "\n\n" \
- "Copy an image to MTD device\n" \
- "\nOptions:" \
- "\n -v Verbose" \
-
-#define flock_trivial_usage \
- "[-sxun] FD|{FILE [-c] PROG ARGS}"
-#define flock_full_usage "\n\n" \
- "[Un]lock file descriptor, or lock FILE and run PROG\n" \
- "\nOptions:" \
- "\n -s Shared lock" \
- "\n -x Exclusive lock (default)" \
- "\n -u Unlock FD" \
- "\n -n Fail rather than wait" \
-
-#define fold_trivial_usage \
- "[-bs] [-w WIDTH] [FILE]..."
-#define fold_full_usage "\n\n" \
- "Wrap input lines in each FILE (or stdin), writing to stdout\n" \
- "\nOptions:" \
- "\n -b Count bytes rather than columns" \
- "\n -s Break at spaces" \
- "\n -w Use WIDTH columns instead of 80" \
-
-#define free_trivial_usage \
- ""
-#define free_full_usage "\n\n" \
- "Display the amount of free and used system memory"
-#define free_example_usage \
- "$ free\n" \
- " total used free shared buffers\n" \
- " Mem: 257628 248724 8904 59644 93124\n" \
- " Swap: 128516 8404 120112\n" \
- "Total: 386144 257128 129016\n" \
-
-#define freeramdisk_trivial_usage \
- "DEVICE"
-#define freeramdisk_full_usage "\n\n" \
- "Free all memory used by the specified ramdisk"
-#define freeramdisk_example_usage \
- "$ freeramdisk /dev/ram2\n"
-
-#define fsck_trivial_usage \
- "[-ANPRTV] [-C FD] [-t FSTYPE] [FS_OPTS] [BLOCKDEV]..."
-#define fsck_full_usage "\n\n" \
- "Check and repair filesystems\n" \
- "\nOptions:" \
- "\n -A Walk /etc/fstab and check all filesystems" \
- "\n -N Don't execute, just show what would be done" \
- "\n -P With -A, check filesystems in parallel" \
- "\n -R With -A, skip the root filesystem" \
- "\n -T Don't show title on startup" \
- "\n -V Verbose" \
- "\n -C n Write status information to specified filedescriptor" \
- "\n -t TYPE List of filesystem types to check" \
-
-#define fsck_minix_trivial_usage \
- "[-larvsmf] BLOCKDEV"
-#define fsck_minix_full_usage "\n\n" \
- "Check MINIX filesystem\n" \
- "\nOptions:" \
- "\n -l List all filenames" \
- "\n -r Perform interactive repairs" \
- "\n -a Perform automatic repairs" \
- "\n -v Verbose" \
- "\n -s Output superblock information" \
- "\n -m Show \"mode not cleared\" warnings" \
- "\n -f Force file system check" \
-
-#define ftpd_trivial_usage \
- "[-wvS] [-t N] [-T N] [DIR]"
-#define ftpd_full_usage "\n\n" \
- "Anonymous FTP server\n" \
- "\n" \
- "ftpd should be used as an inetd service.\n" \
- "ftpd's line for inetd.conf:\n" \
- " 21 stream tcp nowait root ftpd ftpd /files/to/serve\n" \
- "It also can be ran from tcpsvd:\n" \
- " tcpsvd -vE 0.0.0.0 21 ftpd /files/to/serve\n" \
- "\nOptions:" \
- "\n -w Allow upload" \
- "\n -v Log to stderr" \
- "\n -S Log to syslog" \
- "\n -t,-T Idle and absolute timeouts" \
- "\n DIR Change root to this directory" \
-
-#define ftpget_trivial_usage \
- "[OPTIONS] HOST [LOCAL_FILE] REMOTE_FILE"
-#define ftpget_full_usage "\n\n" \
- "Retrieve a remote file via FTP\n" \
- "\nOptions:" \
- IF_FEATURE_FTPGETPUT_LONG_OPTIONS( \
- "\n -c,--continue Continue previous transfer" \
- "\n -v,--verbose Verbose" \
- "\n -u,--username Username" \
- "\n -p,--password Password" \
- "\n -P,--port Port number" \
- ) \
- IF_NOT_FEATURE_FTPGETPUT_LONG_OPTIONS( \
- "\n -c Continue previous transfer" \
- "\n -v Verbose" \
- "\n -u Username" \
- "\n -p Password" \
- "\n -P Port number" \
- )
-
-#define ftpput_trivial_usage \
- "[OPTIONS] HOST [REMOTE_FILE] LOCAL_FILE"
-#define ftpput_full_usage "\n\n" \
- "Store a local file on a remote machine via FTP\n" \
- "\nOptions:" \
- IF_FEATURE_FTPGETPUT_LONG_OPTIONS( \
- "\n -v,--verbose Verbose" \
- "\n -u,--username Username" \
- "\n -p,--password Password" \
- "\n -P,--port Port number" \
- ) \
- IF_NOT_FEATURE_FTPGETPUT_LONG_OPTIONS( \
- "\n -v Verbose" \
- "\n -u Username" \
- "\n -p Password" \
- "\n -P Port number" \
- )
-
-#define fuser_trivial_usage \
- "[OPTIONS] FILE or PORT/PROTO"
-#define fuser_full_usage "\n\n" \
- "Find processes which use FILEs or PORTs\n" \
- "\nOptions:" \
- "\n -m Find processes which use same fs as FILEs" \
- "\n -4 Search only IPv4 space" \
- "\n -6 Search only IPv6 space" \
- "\n -s Don't display PIDs" \
- "\n -k Kill found processes" \
- "\n -SIGNAL Signal to send (default: KILL)" \
-
-#define getenforce_trivial_usage NOUSAGE_STR
-#define getenforce_full_usage ""
-
-#define getopt_trivial_usage \
- "[OPTIONS]"
-#define getopt_full_usage "\n\n" \
- "Options:" \
- IF_LONG_OPTS( \
- "\n -a,--alternative Allow long options starting with single -" \
- "\n -l,--longoptions=longopts Long options to be recognized" \
- "\n -n,--name=progname The name under which errors are reported" \
- "\n -o,--options=optstring Short options to be recognized" \
- "\n -q,--quiet Disable error reporting by getopt(3)" \
- "\n -Q,--quiet-output No normal output" \
- "\n -s,--shell=shell Set shell quoting conventions" \
- "\n -T,--test Test for getopt(1) version" \
- "\n -u,--unquoted Don't quote the output" \
- ) \
- IF_NOT_LONG_OPTS( \
- "\n -a Allow long options starting with single -" \
- "\n -l longopts Long options to be recognized" \
- "\n -n progname The name under which errors are reported" \
- "\n -o optstring Short options to be recognized" \
- "\n -q Disable error reporting by getopt(3)" \
- "\n -Q No normal output" \
- "\n -s shell Set shell quoting conventions" \
- "\n -T Test for getopt(1) version" \
- "\n -u Don't quote the output" \
- )
-#define getopt_example_usage \
- "$ cat getopt.test\n" \
- "#!/bin/sh\n" \
- "GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \
- " -n 'example.busybox' -- \"$@\"`\n" \
- "if [ $? != 0 ]; then exit 1; fi\n" \
- "eval set -- \"$GETOPT\"\n" \
- "while true; do\n" \
- " case $1 in\n" \
- " -a|--a-long) echo \"Option a\"; shift;;\n" \
- " -b|--b-long) echo \"Option b, argument '$2'\"; shift 2;;\n" \
- " -c|--c-long)\n" \
- " case \"$2\" in\n" \
- " \"\") echo \"Option c, no argument\"; shift 2;;\n" \
- " *) echo \"Option c, argument '$2'\"; shift 2;;\n" \
- " esac;;\n" \
- " --) shift; break;;\n" \
- " *) echo \"Internal error!\"; exit 1;;\n" \
- " esac\n" \
- "done\n"
-
-#define getsebool_trivial_usage \
- "-a or getsebool boolean..."
-#define getsebool_full_usage "\n\n" \
- " -a Show all selinux booleans"
-
-#define getty_trivial_usage \
- "[OPTIONS] BAUD_RATE TTY [TERMTYPE]"
-#define getty_full_usage "\n\n" \
- "Open a tty, prompt for a login name, then invoke /bin/login\n" \
- "\nOptions:" \
- "\n -h Enable hardware (RTS/CTS) flow control" \
- "\n -i Don't display /etc/issue before running login" \
- "\n -L Local line, don't do carrier detect" \
- "\n -m Get baud rate from modem's CONNECT status message" \
- "\n -w Wait for a CR or LF before sending /etc/issue" \
- "\n -n Don't prompt the user for a login name" \
- "\n -f ISSUE_FILE Display ISSUE_FILE instead of /etc/issue" \
- "\n -l LOGIN Invoke LOGIN instead of /bin/login" \
- "\n -t SEC Terminate after SEC if no username is read" \
- "\n -I INITSTR Send INITSTR before anything else" \
- "\n -H HOST Log HOST into the utmp file as the hostname" \
-
-#define grep_trivial_usage \
- "[-HhnlLoqvsriw" \
- "F" \
- IF_FEATURE_GREP_EGREP_ALIAS("E") \
- IF_EXTRA_COMPAT("z") \
- "] [-m N] " \
- IF_FEATURE_GREP_CONTEXT("[-A/B/C N] ") \
- "PATTERN/-e PATTERN.../-f FILE [FILE]..."
-#define grep_full_usage "\n\n" \
- "Search for PATTERN in FILEs (or stdin)\n" \
- "\nOptions:" \
- "\n -H Add 'filename:' prefix" \
- "\n -h Do not add 'filename:' prefix" \
- "\n -n Add 'line_no:' prefix" \
- "\n -l Show only names of files that match" \
- "\n -L Show only names of files that don't match" \
- "\n -c Show only count of matching lines" \
- "\n -o Show only the matching part of line" \
- "\n -q Quiet. Return 0 if PATTERN is found, 1 otherwise" \
- "\n -v Select non-matching lines" \
- "\n -s Suppress open and read errors" \
- "\n -r Recurse" \
- "\n -i Ignore case" \
- "\n -w Match whole words only" \
- "\n -F PATTERN is a literal (not regexp)" \
- IF_FEATURE_GREP_EGREP_ALIAS( \
- "\n -E PATTERN is an extended regexp" \
- ) \
- IF_EXTRA_COMPAT( \
- "\n -z Input is NUL terminated" \
- ) \
- "\n -m N Match up to N times per file" \
- IF_FEATURE_GREP_CONTEXT( \
- "\n -A N Print N lines of trailing context" \
- "\n -B N Print N lines of leading context" \
- "\n -C N Same as '-A N -B N'" \
- ) \
- "\n -e PTRN Pattern to match" \
- "\n -f FILE Read pattern from file" \
-
-#define grep_example_usage \
- "$ grep root /etc/passwd\n" \
- "root:x:0:0:root:/root:/bin/bash\n" \
- "$ grep ^[rR]oo. /etc/passwd\n" \
- "root:x:0:0:root:/root:/bin/bash\n"
-
-#define egrep_trivial_usage NOUSAGE_STR
-#define egrep_full_usage ""
-
-#define fgrep_trivial_usage NOUSAGE_STR
-#define fgrep_full_usage ""
-
-#define gunzip_trivial_usage \
- "[OPTIONS] [FILE]..."
-#define gunzip_full_usage "\n\n" \
- "Decompress FILEs (or stdin)\n" \
- "\nOptions:" \
- "\n -c Write to stdout" \
- "\n -f Force" \
- "\n -t Test file integrity" \
-
-#define gunzip_example_usage \
- "$ ls -la /tmp/BusyBox*\n" \
- "-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \
- "$ gunzip /tmp/BusyBox-0.43.tar.gz\n" \
- "$ ls -la /tmp/BusyBox*\n" \
- "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar\n"
-
-#define gzip_trivial_usage \
- "[OPTIONS] [FILE]..."
-#define gzip_full_usage "\n\n" \
- "Compress FILEs (or stdin)\n" \
- "\nOptions:" \
- "\n -d Decompress" \
- "\n -c Write to stdout" \
- "\n -f Force" \
-
-#define gzip_example_usage \
- "$ ls -la /tmp/busybox*\n" \
- "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar\n" \
- "$ gzip /tmp/busybox.tar\n" \
- "$ ls -la /tmp/busybox*\n" \
- "-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz\n"
-
-#define halt_trivial_usage \
- "[-d DELAY] [-n] [-f]" IF_FEATURE_WTMP(" [-w]")
-#define halt_full_usage "\n\n" \
- "Halt the system\n" \
- "\nOptions:" \
- "\n -d Delay interval for halting" \
- "\n -n No call to sync()" \
- "\n -f Force halt (don't go through init)" \
- IF_FEATURE_WTMP( \
- "\n -w Only write a wtmp record" \
- )
-
-#define hdparm_trivial_usage \
- "[OPTIONS] [DEVICE]"
-#define hdparm_full_usage "\n\n" \
- "Options:" \
- "\n -a Get/set fs readahead" \
- "\n -A Set drive read-lookahead flag (0/1)" \
- "\n -b Get/set bus state (0 == off, 1 == on, 2 == tristate)" \
- "\n -B Set Advanced Power Management setting (1-255)" \
- "\n -c Get/set IDE 32-bit IO setting" \
- "\n -C Check IDE power mode status" \
- IF_FEATURE_HDPARM_HDIO_GETSET_DMA( \
- "\n -d Get/set using_dma flag") \
- "\n -D Enable/disable drive defect-mgmt" \
- "\n -f Flush buffer cache for device on exit" \
- "\n -g Display drive geometry" \
- "\n -h Display terse usage information" \
- IF_FEATURE_HDPARM_GET_IDENTITY( \
- "\n -i Display drive identification") \
- IF_FEATURE_HDPARM_GET_IDENTITY( \
- "\n -I Detailed/current information directly from drive") \
- "\n -k Get/set keep_settings_over_reset flag (0/1)" \
- "\n -K Set drive keep_features_over_reset flag (0/1)" \
- "\n -L Set drive doorlock (0/1) (removable harddisks only)" \
- "\n -m Get/set multiple sector count" \
- "\n -n Get/set ignore-write-errors flag (0/1)" \
- "\n -p Set PIO mode on IDE interface chipset (0,1,2,3,4,...)" \
- "\n -P Set drive prefetch count" \
-/* "\n -q Change next setting quietly" - not supported ib bbox */ \
- "\n -Q Get/set DMA tagged-queuing depth (if supported)" \
- "\n -r Get/set readonly flag (DANGEROUS to set)" \
- IF_FEATURE_HDPARM_HDIO_SCAN_HWIF( \
- "\n -R Register an IDE interface (DANGEROUS)") \
- "\n -S Set standby (spindown) timeout" \
- "\n -t Perform device read timings" \
- "\n -T Perform cache read timings" \
- "\n -u Get/set unmaskirq flag (0/1)" \
- IF_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF( \
- "\n -U Unregister an IDE interface (DANGEROUS)") \
- "\n -v Defaults; same as -mcudkrag for IDE drives" \
- "\n -V Display program version and exit immediately" \
- IF_FEATURE_HDPARM_HDIO_DRIVE_RESET( \
- "\n -w Perform device reset (DANGEROUS)") \
- "\n -W Set drive write-caching flag (0/1) (DANGEROUS)" \
- IF_FEATURE_HDPARM_HDIO_TRISTATE_HWIF( \
- "\n -x Tristate device for hotswap (0/1) (DANGEROUS)") \
- "\n -X Set IDE xfer mode (DANGEROUS)" \
- "\n -y Put IDE drive in standby mode" \
- "\n -Y Put IDE drive to sleep" \
- "\n -Z Disable Seagate auto-powersaving mode" \
- "\n -z Reread partition table" \
-
-#define head_trivial_usage \
- "[OPTIONS] [FILE]..."
-#define head_full_usage "\n\n" \
- "Print first 10 lines of each FILE (or stdin) to stdout.\n" \
- "With more than one FILE, precede each with a filename header.\n" \
- "\nOptions:" \
- "\n -n N[kbm] Print first N lines" \
- IF_FEATURE_FANCY_HEAD( \
- "\n -c N[kbm] Print first N bytes" \
- "\n -q Never print headers" \
- "\n -v Always print headers" \
- ) \
- "\n" \
- "\nN may be suffixed by k (x1024), b (x512), or m (x1024^2)." \
-
-#define head_example_usage \
- "$ head -n 2 /etc/passwd\n" \
- "root:x:0:0:root:/root:/bin/bash\n" \
- "daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n"
-
-#define tail_trivial_usage \
- "[OPTIONS] [FILE]..."
-#define tail_full_usage "\n\n" \
- "Print last 10 lines of each FILE (or stdin) to stdout.\n" \
- "With more than one FILE, precede each with a filename header.\n" \
- "\nOptions:" \
- "\n -f Print data as file grows" \
- IF_FEATURE_FANCY_TAIL( \
- "\n -s SECONDS Wait SECONDS between reads with -f" \
- ) \
- "\n -n N[kbm] Print last N lines" \
- IF_FEATURE_FANCY_TAIL( \
- "\n -c N[kbm] Print last N bytes" \
- "\n -q Never print headers" \
- "\n -v Always print headers" \
- "\n" \
- "\nN may be suffixed by k (x1024), b (x512), or m (x1024^2)." \
- "\nIf N starts with a '+', output begins with the Nth item from the start" \
- "\nof each file, not from the end." \
- ) \
-
-#define tail_example_usage \
- "$ tail -n 1 /etc/resolv.conf\n" \
- "nameserver 10.0.0.1\n"
-
-#define hexdump_trivial_usage \
- "[-bcCdefnosvx" IF_FEATURE_HEXDUMP_REVERSE("R") "] [FILE]..."
-#define hexdump_full_usage "\n\n" \
- "Display FILEs (or stdin) in a user specified format\n" \
- "\nOptions:" \
- "\n -b One-byte octal display" \
- "\n -c One-byte character display" \
- "\n -C Canonical hex+ASCII, 16 bytes per line" \
- "\n -d Two-byte decimal display" \
- "\n -e FORMAT STRING" \
- "\n -f FORMAT FILE" \
- "\n -n LENGTH Interpret only LENGTH bytes of input" \
- "\n -o Two-byte octal display" \
- "\n -s OFFSET Skip OFFSET bytes" \
- "\n -v Display all input data" \
- "\n -x Two-byte hexadecimal display" \
- IF_FEATURE_HEXDUMP_REVERSE( \
- "\n -R Reverse of 'hexdump -Cv'") \
-
-#define hd_trivial_usage \
- "FILE..."
-#define hd_full_usage "\n\n" \
- "hd is an alias for hexdump -C"
-
-#define hostid_trivial_usage \
- ""
-#define hostid_full_usage "\n\n" \
- "Print out a unique 32-bit identifier for the machine"
-
-#define hostname_trivial_usage \
- "[OPTIONS] [HOSTNAME | -F FILE]"
-#define hostname_full_usage "\n\n" \
- "Get or set hostname or DNS domain name\n" \
- "\nOptions:" \
- "\n -s Short" \
- "\n -i Addresses for the hostname" \
- "\n -d DNS domain name" \
- "\n -f Fully qualified domain name" \
- "\n -F FILE Use FILE's content as hostname" \
-
-#define hostname_example_usage \
- "$ hostname\n" \
- "sage\n"
-
-#define dnsdomainname_trivial_usage NOUSAGE_STR
-#define dnsdomainname_full_usage ""
-
-#define httpd_trivial_usage \
- "[-ifv[v]]" \
- " [-c CONFFILE]" \
- " [-p [IP:]PORT]" \
- IF_FEATURE_HTTPD_SETUID(" [-u USER[:GRP]]") \
- IF_FEATURE_HTTPD_BASIC_AUTH(" [-r REALM]") \
- " [-h HOME]\n" \
- "or httpd -d/-e" IF_FEATURE_HTTPD_AUTH_MD5("/-m") " STRING"
-#define httpd_full_usage "\n\n" \
- "Listen for incoming HTTP requests\n" \
- "\nOptions:" \
- "\n -i Inetd mode" \
- "\n -f Don't daemonize" \
- "\n -v[v] Verbose" \
- "\n -p [IP:]PORT Bind to ip:port (default *:80)" \
- IF_FEATURE_HTTPD_SETUID( \
- "\n -u USER[:GRP] Set uid/gid after binding to port") \
- IF_FEATURE_HTTPD_BASIC_AUTH( \
- "\n -r REALM Authentication Realm for Basic Authentication") \
- "\n -h HOME Home directory (default .)" \
- "\n -c FILE Configuration file (default {/etc,HOME}/httpd.conf)" \
- IF_FEATURE_HTTPD_AUTH_MD5( \
- "\n -m STRING MD5 crypt STRING") \
- "\n -e STRING HTML encode STRING" \
- "\n -d STRING URL decode STRING" \
-
-#define hwclock_trivial_usage \
- IF_FEATURE_HWCLOCK_LONG_OPTIONS( \
- "[-r|--show] [-s|--hctosys] [-w|--systohc]" \
- " [-l|--localtime] [-u|--utc]" \
- " [-f FILE]" \
- ) \
- IF_NOT_FEATURE_HWCLOCK_LONG_OPTIONS( \
- "[-r] [-s] [-w] [-l] [-u] [-f FILE]" \
- )
-#define hwclock_full_usage "\n\n" \
- "Query and set hardware clock (RTC)\n" \
- "\nOptions:" \
- "\n -r Show hardware clock time" \
- "\n -s Set system time from hardware clock" \
- "\n -w Set hardware clock to system time" \
- "\n -u Hardware clock is in UTC" \
- "\n -l Hardware clock is in local time" \
- "\n -f FILE Use specified device (e.g. /dev/rtc2)" \
-
-#define id_trivial_usage \
- "[OPTIONS] [USER]"
-#define id_full_usage "\n\n" \
- "Print information about USER or the current user\n" \
- "\nOptions:" \
- IF_SELINUX( \
- "\n -Z Print the security context" \
- ) \
- "\n -u Print user ID" \
- "\n -g Print group ID" \
- "\n -G Print supplementary group IDs" \
- "\n -n Print name instead of a number" \
- "\n -r Print real user ID instead of effective ID" \
-
-#define id_example_usage \
- "$ id\n" \
- "uid=1000(andersen) gid=1000(andersen)\n"
-
-#define ifconfig_trivial_usage \
- IF_FEATURE_IFCONFIG_STATUS("[-a]") " interface [address]"
-#define ifconfig_full_usage "\n\n" \
- "Configure a network interface\n" \
- "\nOptions:" \
- "\n" \
- IF_FEATURE_IPV6( \
- " [add ADDRESS[/PREFIXLEN]]\n") \
- IF_FEATURE_IPV6( \
- " [del ADDRESS[/PREFIXLEN]]\n") \
- " [[-]broadcast [ADDRESS]] [[-]pointopoint [ADDRESS]]\n" \
- " [netmask ADDRESS] [dstaddr ADDRESS]\n" \
- IF_FEATURE_IFCONFIG_SLIP( \
- " [outfill NN] [keepalive NN]\n") \
- " " IF_FEATURE_IFCONFIG_HW("[hw ether" IF_FEATURE_HWIB("|infiniband")" ADDRESS] ") "[metric NN] [mtu NN]\n" \
- " [[-]trailers] [[-]arp] [[-]allmulti]\n" \
- " [multicast] [[-]promisc] [txqueuelen NN] [[-]dynamic]\n" \
- IF_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ( \
- " [mem_start NN] [io_addr NN] [irq NN]\n") \
- " [up|down] ..."
-
-#define ifenslave_trivial_usage \
- "[-cdf] MASTER_IFACE SLAVE_IFACE..."
-#define ifenslave_full_usage "\n\n" \
- "Configure network interfaces for parallel routing\n" \
- "\nOptions:" \
- "\n -c, --change-active Change active slave" \
- "\n -d, --detach Remove slave interface from bonding device" \
- "\n -f, --force Force, even if interface is not Ethernet" \
-/* "\n -r, --receive-slave Create a receive-only slave" */
-
-#define ifenslave_example_usage \
- "To create a bond device, simply follow these three steps:\n" \
- "- ensure that the required drivers are properly loaded:\n" \
- " # modprobe bonding ; modprobe <3c59x|eepro100|pcnet32|tulip|...>\n" \
- "- assign an IP address to the bond device:\n" \
- " # ifconfig bond0 <addr> netmask <mask> broadcast <bcast>\n" \
- "- attach all the interfaces you need to the bond device:\n" \
- " # ifenslave bond0 eth0 eth1 eth2\n" \
- " If bond0 didn't have a MAC address, it will take eth0's. Then, all\n" \
- " interfaces attached AFTER this assignment will get the same MAC addr.\n\n" \
- " To detach a dead interface without setting the bond device down:\n" \
- " # ifenslave -d bond0 eth1\n\n" \
- " To set the bond device down and automatically release all the slaves:\n" \
- " # ifconfig bond0 down\n\n" \
- " To change active slave:\n" \
- " # ifenslave -c bond0 eth0\n" \
-
-#define ifplugd_trivial_usage \
- "[OPTIONS]"
-#define ifplugd_full_usage "\n\n" \
- "Network interface plug detection daemon\n" \
- "\nOptions:" \
- "\n -n Don't daemonize" \
- "\n -s Don't log to syslog" \
- "\n -i IFACE Interface" \
- "\n -f/-F Treat link detection error as link down/link up" \
- "\n (otherwise exit on error)" \
- "\n -a Don't up interface at each link probe" \
- "\n -M Monitor creation/destruction of interface" \
- "\n (otherwise it must exist)" \
- "\n -r PROG Script to run" \
- "\n -x ARG Extra argument for script" \
- "\n -I Don't exit on nonzero exit code from script" \
- "\n -p Don't run script on daemon startup" \
- "\n -q Don't run script on daemon quit" \
- "\n -l Run script on startup even if no cable is detected" \
- "\n -t SECS Poll time in seconds" \
- "\n -u SECS Delay before running script after link up" \
- "\n -d SECS Delay after link down" \
- "\n -m MODE API mode (mii, priv, ethtool, wlan, iff, auto)" \
- "\n -k Kill running daemon" \
-
-#define ifup_trivial_usage \
- "[-ain"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] IFACE..."
-#define ifup_full_usage "\n\n" \
- "Options:" \
- "\n -a De/configure all interfaces automatically" \
- "\n -i FILE Use FILE for interface definitions" \
- "\n -n Print out what would happen, but don't do it" \
- IF_FEATURE_IFUPDOWN_MAPPING( \
- "\n (note: doesn't disable mappings)" \
- "\n -m Don't run any mappings" \
- ) \
- "\n -v Print out what would happen before doing it" \
- "\n -f Force de/configuration" \
-
-#define ifdown_trivial_usage \
- "[-ain"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] ifaces..."
-#define ifdown_full_usage "\n\n" \
- "Options:" \
- "\n -a De/configure all interfaces automatically" \
- "\n -i FILE Use FILE for interface definitions" \
- "\n -n Print out what would happen, but don't do it" \
- IF_FEATURE_IFUPDOWN_MAPPING( \
- "\n (note: doesn't disable mappings)" \
- "\n -m Don't run any mappings" \
- ) \
- "\n -v Print out what would happen before doing it" \
- "\n -f Force de/configuration" \
-
-#define inetd_trivial_usage \
- "[-fe] [-q N] [-R N] [CONFFILE]"
-#define inetd_full_usage "\n\n" \
- "Listen for network connections and launch programs\n" \
- "\nOptions:" \
- "\n -f Run in foreground" \
- "\n -e Log to stderr" \
- "\n -q N Socket listen queue (default: 128)" \
- "\n -R N Pause services after N connects/min" \
- "\n (default: 0 - disabled)" \
-
-#define init_trivial_usage \
- ""
-#define init_full_usage "\n\n" \
- "Init is the parent of all processes"
-
-#define init_notes_usage \
-"This version of init is designed to be run only by the kernel.\n" \
-"\n" \
-"BusyBox init doesn't support multiple runlevels. The runlevels field of\n" \
-"the /etc/inittab file is completely ignored by BusyBox init. If you want\n" \
-"runlevels, use sysvinit.\n" \
-"\n" \
-"BusyBox init works just fine without an inittab. If no inittab is found,\n" \
-"it has the following default behavior:\n" \
-"\n" \
-" ::sysinit:/etc/init.d/rcS\n" \
-" ::askfirst:/bin/sh\n" \
-" ::ctrlaltdel:/sbin/reboot\n" \
-" ::shutdown:/sbin/swapoff -a\n" \
-" ::shutdown:/bin/umount -a -r\n" \
-" ::restart:/sbin/init\n" \
-"\n" \
-"if it detects that /dev/console is _not_ a serial console, it will also run:\n" \
-"\n" \
-" tty2::askfirst:/bin/sh\n" \
-" tty3::askfirst:/bin/sh\n" \
-" tty4::askfirst:/bin/sh\n" \
-"\n" \
-"If you choose to use an /etc/inittab file, the inittab entry format is as follows:\n" \
-"\n" \
-" <id>:<runlevels>:<action>:<process>\n" \
-"\n" \
-" <id>:\n" \
-"\n" \
-" WARNING: This field has a non-traditional meaning for BusyBox init!\n" \
-" The id field is used by BusyBox init to specify the controlling tty for\n" \
-" the specified process to run on. The contents of this field are\n" \
-" appended to \"/dev/\" and used as-is. There is no need for this field to\n" \
-" be unique, although if it isn't you may have strange results. If this\n" \
-" field is left blank, the controlling tty is set to the console. Also\n" \
-" note that if BusyBox detects that a serial console is in use, then only\n" \
-" entries whose controlling tty is either the serial console or /dev/null\n" \
-" will be run. BusyBox init does nothing with utmp. We don't need no\n" \
-" stinkin' utmp.\n" \
-"\n" \
-" <runlevels>:\n" \
-"\n" \
-" The runlevels field is completely ignored.\n" \
-"\n" \
-" <action>:\n" \
-"\n" \
-" Valid actions include: sysinit, respawn, askfirst, wait,\n" \
-" once, restart, ctrlaltdel, and shutdown.\n" \
-"\n" \
-" The available actions can be classified into two groups: actions\n" \
-" that are run only once, and actions that are re-run when the specified\n" \
-" process exits.\n" \
-"\n" \
-" Run only-once actions:\n" \
-"\n" \
-" 'sysinit' is the first item run on boot. init waits until all\n" \
-" sysinit actions are completed before continuing. Following the\n" \
-" completion of all sysinit actions, all 'wait' actions are run.\n" \
-" 'wait' actions, like 'sysinit' actions, cause init to wait until\n" \
-" the specified task completes. 'once' actions are asynchronous,\n" \
-" therefore, init does not wait for them to complete. 'restart' is\n" \
-" the action taken to restart the init process. By default this should\n" \
-" simply run /sbin/init, but can be a script which runs pivot_root or it\n" \
-" can do all sorts of other interesting things. The 'ctrlaltdel' init\n" \
-" actions are run when the system detects that someone on the system\n" \
-" console has pressed the CTRL-ALT-DEL key combination. Typically one\n" \
-" wants to run 'reboot' at this point to cause the system to reboot.\n" \
-" Finally the 'shutdown' action specifies the actions to taken when\n" \
-" init is told to reboot. Unmounting filesystems and disabling swap\n" \
-" is a very good here.\n" \
-"\n" \
-" Run repeatedly actions:\n" \
-"\n" \
-" 'respawn' actions are run after the 'once' actions. When a process\n" \
-" started with a 'respawn' action exits, init automatically restarts\n" \
-" it. Unlike sysvinit, BusyBox init does not stop processes from\n" \
-" respawning out of control. The 'askfirst' actions acts just like\n" \
-" respawn, except that before running the specified process it\n" \
-" displays the line \"Please press Enter to activate this console.\"\n" \
-" and then waits for the user to press enter before starting the\n" \
-" specified process.\n" \
-"\n" \
-" Unrecognized actions (like initdefault) will cause init to emit an\n" \
-" error message, and then go along with its business. All actions are\n" \
-" run in the order they appear in /etc/inittab.\n" \
-"\n" \
-" <process>:\n" \
-"\n" \
-" Specifies the process to be executed and its command line.\n" \
-"\n" \
-"Example /etc/inittab file:\n" \
-"\n" \
-" # This is run first except when booting in single-user mode\n" \
-" #\n" \
-" ::sysinit:/etc/init.d/rcS\n" \
-" \n" \
-" # /bin/sh invocations on selected ttys\n" \
-" #\n" \
-" # Start an \"askfirst\" shell on the console (whatever that may be)\n" \
-" ::askfirst:-/bin/sh\n" \
-" # Start an \"askfirst\" shell on /dev/tty2-4\n" \
-" tty2::askfirst:-/bin/sh\n" \
-" tty3::askfirst:-/bin/sh\n" \
-" tty4::askfirst:-/bin/sh\n" \
-" \n" \
-" # /sbin/getty invocations for selected ttys\n" \
-" #\n" \
-" tty4::respawn:/sbin/getty 38400 tty4\n" \
-" tty5::respawn:/sbin/getty 38400 tty5\n" \
-" \n" \
-" \n" \
-" # Example of how to put a getty on a serial line (for a terminal)\n" \
-" #\n" \
-" #::respawn:/sbin/getty -L ttyS0 9600 vt100\n" \
-" #::respawn:/sbin/getty -L ttyS1 9600 vt100\n" \
-" #\n" \
-" # Example how to put a getty on a modem line\n" \
-" #::respawn:/sbin/getty 57600 ttyS2\n" \
-" \n" \
-" # Stuff to do when restarting the init process\n" \
-" ::restart:/sbin/init\n" \
-" \n" \
-" # Stuff to do before rebooting\n" \
-" ::ctrlaltdel:/sbin/reboot\n" \
-" ::shutdown:/bin/umount -a -r\n" \
-" ::shutdown:/sbin/swapoff -a\n"
-
-#define inotifyd_trivial_usage \
- "PROG FILE1[:MASK]..."
-#define inotifyd_full_usage "\n\n" \
- "Run PROG on filesystem changes." \
- "\nWhen a filesystem event matching MASK occurs on FILEn," \
- "\nPROG ACTUAL_EVENTS FILEn [SUBFILE] is run." \
- "\nEvents:" \
- "\n a File is accessed" \
- "\n c File is modified" \
- "\n e Metadata changed" \
- "\n w Writable file is closed" \
- "\n 0 Unwritable file is closed" \
- "\n r File is opened" \
- "\n D File is deleted" \
- "\n M File is moved" \
- "\n u Backing fs is unmounted" \
- "\n o Event queue overflowed" \
- "\n x File can't be watched anymore" \
- "\nIf watching a directory:" \
- "\n m Subfile is moved into dir" \
- "\n y Subfile is moved out of dir" \
- "\n n Subfile is created" \
- "\n d Subfile is deleted" \
- "\n" \
- "\ninotifyd waits for PROG to exit." \
- "\nWhen x event happens for all FILEs, inotifyd exits." \
-
-/* 2.6 style insmod has no options and required filename
- * (not module name - .ko can't be omitted) */
-#define insmod_trivial_usage \
- IF_FEATURE_2_4_MODULES("[OPTIONS] MODULE ") \
- IF_NOT_FEATURE_2_4_MODULES("FILE ") \
- "[symbol=value]..."
-#define insmod_full_usage "\n\n" \
- "Load the specified kernel modules into the kernel" \
- IF_FEATURE_2_4_MODULES( "\n" \
- "\nOptions:" \
- "\n -f Force module to load into the wrong kernel version" \
- "\n -k Make module autoclean-able" \
- "\n -v Verbose" \
- "\n -q Quiet" \
- "\n -L Lock to prevent simultaneous loads of a module" \
- IF_FEATURE_INSMOD_LOAD_MAP( \
- "\n -m Output load map to stdout" \
- ) \
- "\n -o NAME Set internal module name to NAME" \
- "\n -x Don't export externs" \
- )
-
-/* -v, -b, -c are ignored */
-#define install_trivial_usage \
- "[-cdDsp] [-o USER] [-g GRP] [-m MODE] [SOURCE]... DEST"
-#define install_full_usage "\n\n" \
- "Copy files and set attributes\n" \
- "\nOptions:" \
- "\n -c Just copy (default)" \
- "\n -d Create directories" \
- "\n -D Create leading target directories" \
- "\n -s Strip symbol table" \
- "\n -p Preserve date" \
- "\n -o USER Set ownership" \
- "\n -g GRP Set group ownership" \
- "\n -m MODE Set permissions" \
- IF_SELINUX( \
- "\n -Z Set security context" \
- )
-
-#define ionice_trivial_usage \
- "[-c 1-3] [-n 0-7] [-p PID] [PROG]"
-#define ionice_full_usage "\n\n" \
- "Change I/O scheduling class and priority\n" \
- "\nOptions:" \
- "\n -c Class. 1:realtime 2:best-effort 3:idle" \
- "\n -n Priority" \
-
-/* would need to make the " | " optional depending on more than one selected: */
-#define ip_trivial_usage \
- "[OPTIONS] {" \
- IF_FEATURE_IP_ADDRESS("address | ") \
- IF_FEATURE_IP_ROUTE("route | ") \
- IF_FEATURE_IP_LINK("link | ") \
- IF_FEATURE_IP_TUNNEL("tunnel | ") \
- IF_FEATURE_IP_RULE("rule") \
- "} {COMMAND}"
-#define ip_full_usage "\n\n" \
- "ip [OPTIONS] OBJECT {COMMAND}\n" \
- "where OBJECT := {" \
- IF_FEATURE_IP_ADDRESS("address | ") \
- IF_FEATURE_IP_ROUTE("route | ") \
- IF_FEATURE_IP_LINK("link | ") \
- IF_FEATURE_IP_TUNNEL("tunnel | ") \
- IF_FEATURE_IP_RULE("rule") \
- "}\n" \
- "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }" \
-
-#define ipaddr_trivial_usage \
- "{ {add|del} IFADDR dev STRING | {show|flush}\n" \
- " [dev STRING] [to PREFIX] }"
-#define ipaddr_full_usage "\n\n" \
- "ipaddr {add|delete} IFADDR dev STRING\n" \
- "ipaddr {show|flush} [dev STRING] [scope SCOPE-ID]\n" \
- " [to PREFIX] [label PATTERN]\n" \
- " IFADDR := PREFIX | ADDR peer PREFIX\n" \
- " [broadcast ADDR] [anycast ADDR]\n" \
- " [label STRING] [scope SCOPE-ID]\n" \
- " SCOPE-ID := [host | link | global | NUMBER]" \
-
-#define ipcalc_trivial_usage \
- "[OPTIONS] ADDRESS[[/]NETMASK] [NETMASK]"
-#define ipcalc_full_usage "\n\n" \
- "Calculate IP network settings from a IP address\n" \
- "\nOptions:" \
- IF_FEATURE_IPCALC_LONG_OPTIONS( \
- "\n -b,--broadcast Display calculated broadcast address" \
- "\n -n,--network Display calculated network address" \
- "\n -m,--netmask Display default netmask for IP" \
- IF_FEATURE_IPCALC_FANCY( \
- "\n -p,--prefix Display the prefix for IP/NETMASK" \
- "\n -h,--hostname Display first resolved host name" \
- "\n -s,--silent Don't ever display error messages" \
- ) \
- ) \
- IF_NOT_FEATURE_IPCALC_LONG_OPTIONS( \
- "\n -b Display calculated broadcast address" \
- "\n -n Display calculated network address" \
- "\n -m Display default netmask for IP" \
- IF_FEATURE_IPCALC_FANCY( \
- "\n -p Display the prefix for IP/NETMASK" \
- "\n -h Display first resolved host name" \
- "\n -s Don't ever display error messages" \
- ) \
- )
-
-#define ipcrm_trivial_usage \
- "[-MQS key] [-mqs id]"
-#define ipcrm_full_usage "\n\n" \
- "Upper-case options MQS remove an object by shmkey value.\n" \
- "Lower-case options remove an object by shmid value.\n" \
- "\nOptions:" \
- "\n -mM Remove memory segment after last detach" \
- "\n -qQ Remove message queue" \
- "\n -sS Remove semaphore" \
-
-#define ipcs_trivial_usage \
- "[[-smq] -i shmid] | [[-asmq] [-tcplu]]"
-#define ipcs_full_usage "\n\n" \
- " -i Show specific resource" \
- "\nResource specification:" \
- "\n -m Shared memory segments" \
- "\n -q Message queues" \
- "\n -s Semaphore arrays" \
- "\n -a All (default)" \
- "\nOutput format:" \
- "\n -t Time" \
- "\n -c Creator" \
- "\n -p Pid" \
- "\n -l Limits" \
- "\n -u Summary" \
-
-#define iplink_trivial_usage \
- "{ set DEVICE { up | down | arp { on | off } | show [DEVICE] }"
-#define iplink_full_usage "\n\n" \
- "iplink set DEVICE { up | down | arp | multicast { on | off } |\n" \
- " dynamic { on | off } |\n" \
- " mtu MTU }\n" \
- "iplink show [DEVICE]" \
-
-#define iproute_trivial_usage \
- "{ list | flush | { add | del | change | append |\n" \
- " replace | monitor } ROUTE }"
-#define iproute_full_usage "\n\n" \
- "iproute { list | flush } SELECTOR\n" \
- "iproute get ADDRESS [from ADDRESS iif STRING]\n" \
- " [oif STRING] [tos TOS]\n" \
- "iproute { add | del | change | append | replace | monitor } ROUTE\n" \
- " SELECTOR := [root PREFIX] [match PREFIX] [proto RTPROTO]\n" \
- " ROUTE := [TYPE] PREFIX [tos TOS] [proto RTPROTO]\n" \
- " [metric METRIC]" \
-
-#define iprule_trivial_usage \
- "{[list | add | del] RULE}"
-#define iprule_full_usage "\n\n" \
- "iprule [list | add | del] SELECTOR ACTION\n" \
- " SELECTOR := [from PREFIX] [to PREFIX] [tos TOS] [fwmark FWMARK]\n" \
- " [dev STRING] [pref NUMBER]\n" \
- " ACTION := [table TABLE_ID] [nat ADDRESS]\n" \
- " [prohibit | reject | unreachable]\n" \
- " [realms [SRCREALM/]DSTREALM]\n" \
- " TABLE_ID := [local | main | default | NUMBER]" \
-
-#define iptunnel_trivial_usage \
- "{ add | change | del | show } [NAME]\n" \
- " [mode { ipip | gre | sit }]\n" \
- " [remote ADDR] [local ADDR] [ttl TTL]"
-#define iptunnel_full_usage "\n\n" \
- "iptunnel { add | change | del | show } [NAME]\n" \
- " [mode { ipip | gre | sit }] [remote ADDR] [local ADDR]\n" \
- " [[i|o]seq] [[i|o]key KEY] [[i|o]csum]\n" \
- " [ttl TTL] [tos TOS] [[no]pmtudisc] [dev PHYS_DEV]" \
-
-#define kbd_mode_trivial_usage \
- "[-a|k|s|u] [-C TTY]"
-#define kbd_mode_full_usage "\n\n" \
- "Report or set the keyboard mode\n" \
- "\nOptions:" \
- "\n -a Default (ASCII)" \
- "\n -k Medium-raw (keyboard)" \
- "\n -s Raw (scancode)" \
- "\n -u Unicode (utf-8)" \
- "\n -C TTY Affect TTY instead of /dev/tty" \
-
-#define kill_trivial_usage \
- "[-l] [-SIG] PID..."
-#define kill_full_usage "\n\n" \
- "Send a signal (default: TERM) to given PIDs\n" \
- "\nOptions:" \
- "\n -l List all signal names and numbers" \
-/* "\n -s SIG Yet another way of specifying SIG" */ \
-
-#define kill_example_usage \
- "$ ps | grep apache\n" \
- "252 root root S [apache]\n" \
- "263 www-data www-data S [apache]\n" \
- "264 www-data www-data S [apache]\n" \
- "265 www-data www-data S [apache]\n" \
- "266 www-data www-data S [apache]\n" \
- "267 www-data www-data S [apache]\n" \
- "$ kill 252\n"
-
-#define killall_trivial_usage \
- "[-l] [-q] [-SIG] PROCESS_NAME..."
-#define killall_full_usage "\n\n" \
- "Send a signal (default: TERM) to given processes\n" \
- "\nOptions:" \
- "\n -l List all signal names and numbers" \
-/* "\n -s SIG Yet another way of specifying SIG" */ \
- "\n -q Don't complain if no processes were killed" \
-
-#define killall_example_usage \
- "$ killall apache\n"
-
-#define killall5_trivial_usage \
- "[-l] [-SIG] [-o PID]..."
-#define killall5_full_usage "\n\n" \
- "Send a signal (default: TERM) to all processes outside current session\n" \
- "\nOptions:" \
- "\n -l List all signal names and numbers" \
- "\n -o PID Don't signal this PID" \
-/* "\n -s SIG Yet another way of specifying SIG" */ \
-
-#define klogd_trivial_usage \
- "[-c N] [-n]"
-#define klogd_full_usage "\n\n" \
- "Kernel logger\n" \
- "\nOptions:" \
- "\n -c N Only messages with level < N are printed to console" \
- "\n -n Run in foreground" \
-
-#define length_trivial_usage \
- "STRING"
-#define length_full_usage "\n\n" \
- "Print STRING's length"
-
-#define length_example_usage \
- "$ length Hello\n" \
- "5\n"
-
-#define less_trivial_usage \
- "[-EMNmh~I?] [FILE]..."
-#define less_full_usage "\n\n" \
- "View FILE (or stdin) one screenful at a time\n" \
- "\nOptions:" \
- "\n -E Quit once the end of a file is reached" \
- "\n -M,-m Display status line with line numbers" \
- "\n and percentage through the file" \
- "\n -N Prefix line number to each line" \
- "\n -I Ignore case in all searches" \
- "\n -~ Suppress ~s displayed past the end of the file" \
-
-#define linux32_trivial_usage NOUSAGE_STR
-#define linux32_full_usage ""
-#define linux64_trivial_usage NOUSAGE_STR
-#define linux64_full_usage ""
-
-#define linuxrc_trivial_usage NOUSAGE_STR
-#define linuxrc_full_usage ""
-
-#define setarch_trivial_usage \
- "personality PROG ARGS"
-#define setarch_full_usage "\n\n" \
- "Personality may be:\n" \
- " linux32 Set 32bit uname emulation\n" \
- " linux64 Set 64bit uname emulation" \
-
-#define ln_trivial_usage \
- "[OPTIONS] TARGET... LINK|DIR"
-#define ln_full_usage "\n\n" \
- "Create a link LINK or DIR/TARGET to the specified TARGET(s)\n" \
- "\nOptions:" \
- "\n -s Make symlinks instead of hardlinks" \
- "\n -f Remove existing destinations" \
- "\n -n Don't dereference symlinks - treat like normal file" \
- "\n -b Make a backup of the target (if exists) before link operation" \
- "\n -S suf Use suffix instead of ~ when making backup files" \
-
-#define ln_example_usage \
- "$ ln -s BusyBox /tmp/ls\n" \
- "$ ls -l /tmp/ls\n" \
- "lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n"
-
-#define load_policy_trivial_usage NOUSAGE_STR
-#define load_policy_full_usage ""
-
-#define loadfont_trivial_usage \
- "< font"
-#define loadfont_full_usage "\n\n" \
- "Load a console font from stdin" \
-/* "\n -C TTY Affect TTY instead of /dev/tty" */ \
-
-#define loadfont_example_usage \
- "$ loadfont < /etc/i18n/fontname\n"
-
-#define loadkmap_trivial_usage \
- "< keymap"
-#define loadkmap_full_usage "\n\n" \
- "Load a binary keyboard translation table from stdin\n" \
-/* "\n -C TTY Affect TTY instead of /dev/tty" */ \
-
-#define loadkmap_example_usage \
- "$ loadkmap < /etc/i18n/lang-keymap\n"
-
-#define logger_trivial_usage \
- "[OPTIONS] [MESSAGE]"
-#define logger_full_usage "\n\n" \
- "Write MESSAGE (or stdin) to syslog\n" \
- "\nOptions:" \
- "\n -s Log to stderr as well as the system log" \
- "\n -t TAG Log using the specified tag (defaults to user name)" \
- "\n -p PRIO Priority (numeric or facility.level pair)" \
-
-#define logger_example_usage \
- "$ logger \"hello\"\n"
-
-#define login_trivial_usage \
- "[-p] [-h HOST] [[-f] USER]"
-#define login_full_usage "\n\n" \
- "Begin a new session on the system\n" \
- "\nOptions:" \
- "\n -f Don't authenticate (user already authenticated)" \
- "\n -h Name of the remote host" \
- "\n -p Preserve environment" \
-
-#define logname_trivial_usage \
- ""
-#define logname_full_usage "\n\n" \
- "Print the name of the current user"
-#define logname_example_usage \
- "$ logname\n" \
- "root\n"
-
-#define logread_trivial_usage \
- "[OPTIONS]"
-#define logread_full_usage "\n\n" \
- "Show messages in syslogd's circular buffer\n" \
- "\nOptions:" \
- "\n -f Output data as log grows" \
-
-#define losetup_trivial_usage \
- "[-o OFS] LOOPDEV FILE - associate loop devices\n" \
- " losetup -d LOOPDEV - disassociate\n" \
- " losetup [-f] - show"
-#define losetup_full_usage "\n\n" \
- "Options:" \
- "\n -o OFS Start OFS bytes into FILE" \
- "\n -f Show first free loop device" \
-
-#define losetup_notes_usage \
- "No arguments will display all current associations.\n" \
- "One argument (losetup /dev/loop1) will display the current association\n" \
- "(if any), or disassociate it (with -d). The display shows the offset\n" \
- "and filename of the file the loop device is currently bound to.\n\n" \
- "Two arguments (losetup /dev/loop1 file.img) create a new association,\n" \
- "with an optional offset (-o 12345). Encryption is not yet supported.\n" \
- "losetup -f will show the first loop free loop device\n\n"
-
-#define lpd_trivial_usage \
- "SPOOLDIR [HELPER [ARGS]]"
-#define lpd_full_usage "\n\n" \
- "SPOOLDIR must contain (symlinks to) device nodes or directories" \
- "\nwith names matching print queue names. In the first case, jobs are" \
- "\nsent directly to the device. Otherwise each job is stored in queue" \
- "\ndirectory and HELPER program is called. Name of file to print" \
- "\nis passed in $DATAFILE variable." \
- "\nExample:" \
- "\n tcpsvd -E 0 515 softlimit -m 999999 lpd /var/spool ./print" \
-
-#define lpq_trivial_usage \
- "[-P queue[@host[:port]]] [-U USERNAME] [-d JOBID]... [-fs]"
-#define lpq_full_usage "\n\n" \
- "Options:" \
- "\n -P lp service to connect to (else uses $PRINTER)" \
- "\n -d Delete jobs" \
- "\n -f Force any waiting job to be printed" \
- "\n -s Short display" \
-
-#define lpr_trivial_usage \
- "-P queue[@host[:port]] -U USERNAME -J TITLE -Vmh [FILE]..."
-/* -C CLASS exists too, not shown.
- * CLASS is supposed to be printed on banner page, if one is requested */
-#define lpr_full_usage "\n\n" \
- "Options:" \
- "\n -P lp service to connect to (else uses $PRINTER)"\
- "\n -m Send mail on completion" \
- "\n -h Print banner page too" \
- "\n -V Verbose" \
-
-#define ls_trivial_usage \
- "[-1Aa" IF_FEATURE_LS_TIMESTAMPS("c") "Cd" \
- IF_FEATURE_LS_TIMESTAMPS("e") IF_FEATURE_LS_FILETYPES("F") "iln" \
- IF_FEATURE_LS_FILETYPES("p") IF_FEATURE_LS_FOLLOWLINKS("L") \
- IF_FEATURE_LS_RECURSIVE("R") IF_FEATURE_LS_SORTFILES("rS") "s" \
- IF_FEATURE_AUTOWIDTH("T") IF_FEATURE_LS_TIMESTAMPS("tu") \
- IF_FEATURE_LS_SORTFILES("v") IF_FEATURE_AUTOWIDTH("w") "x" \
- IF_FEATURE_LS_SORTFILES("X") IF_FEATURE_HUMAN_READABLE("h") "k" \
- IF_SELINUX("K") "] [FILE]..."
-#define ls_full_usage "\n\n" \
- "List directory contents\n" \
- "\nOptions:" \
- "\n -1 List in a single column" \
- "\n -A Don't list . and .." \
- "\n -a Don't hide entries starting with ." \
- "\n -C List by columns" \
- IF_FEATURE_LS_TIMESTAMPS( \
- "\n -c With -l: sort by ctime") \
- IF_FEATURE_LS_COLOR( \
- "\n --color[={always,never,auto}] Control coloring") \
- "\n -d List directory entries instead of contents" \
- IF_FEATURE_LS_TIMESTAMPS( \
- "\n -e List full date and time") \
- IF_FEATURE_LS_FILETYPES( \
- "\n -F Append indicator (one of */=@|) to entries") \
- "\n -i List inode numbers" \
- "\n -l Long listing format" \
- "\n -n List numeric UIDs and GIDs instead of names" \
- IF_FEATURE_LS_FILETYPES( \
- "\n -p Append indicator (one of /=@|) to entries") \
- IF_FEATURE_LS_FOLLOWLINKS( \
- "\n -L List entries pointed to by symlinks") \
- IF_FEATURE_LS_RECURSIVE( \
- "\n -R Recurse") \
- IF_FEATURE_LS_SORTFILES( \
- "\n -r Sort in reverse order") \
- IF_FEATURE_LS_SORTFILES( \
- "\n -S Sort by file size") \
- "\n -s List the size of each file, in blocks" \
- IF_FEATURE_AUTOWIDTH( \
- "\n -T N Assume tabstop every N columns") \
- IF_FEATURE_LS_TIMESTAMPS( \
- "\n -t With -l: sort by modification time") \
- IF_FEATURE_LS_TIMESTAMPS( \
- "\n -u With -l: sort by access time") \
- IF_FEATURE_LS_SORTFILES( \
- "\n -v Sort by version") \
- IF_FEATURE_AUTOWIDTH( \
- "\n -w N Assume the terminal is N columns wide") \
- "\n -x List by lines" \
- IF_FEATURE_LS_SORTFILES( \
- "\n -X Sort by extension") \
- IF_FEATURE_HUMAN_READABLE( \
- "\n -h List sizes in human readable format (1K 243M 2G)") \
- IF_SELINUX( \
- "\n -k List security context") \
- IF_SELINUX( \
- "\n -K List security context in long format") \
- IF_SELINUX( \
- "\n -Z List security context and permission") \
-
-#define lsattr_trivial_usage \
- "[-Radlv] [FILE]..."
-#define lsattr_full_usage "\n\n" \
- "List file attributes on an ext2 fs\n" \
- "\nOptions:" \
- "\n -R Recurse" \
- "\n -a Don't hide entries starting with ." \
- "\n -d List directory entries instead of contents" \
- "\n -l List long flag names" \
- "\n -v List the file's version/generation number" \
-
-#define lsmod_trivial_usage \
- ""
-#define lsmod_full_usage "\n\n" \
- "List the currently loaded kernel modules"
-
-#define lspci_trivial_usage \
- "[-mk]"
-#define lspci_full_usage "\n\n" \
- "List all PCI devices" \
- "\n" \
- "\n -m Parseable output" \
- "\n -k Show driver" \
-
-#define lsusb_trivial_usage NOUSAGE_STR
-#define lsusb_full_usage ""
-
-#if ENABLE_FEATURE_MAKEDEVS_LEAF
-#define makedevs_trivial_usage \
- "NAME TYPE MAJOR MINOR FIRST LAST [s]"
-#define makedevs_full_usage "\n\n" \
- "Create a range of block or character special files" \
- "\n" \
- "\nTYPE is:" \
- "\n b Block device" \
- "\n c Character device" \
- "\n f FIFO, MAJOR and MINOR are ignored" \
- "\n" \
- "\nFIRST..LAST specify numbers appended to NAME." \
- "\nIf 's' is the last argument, the base device is created as well." \
- "\n" \
- "\nExamples:" \
- "\n makedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63" \
- "\n makedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8"
-#define makedevs_example_usage \
- "# makedevs /dev/ttyS c 4 66 2 63\n" \
- "[creates ttyS2-ttyS63]\n" \
- "# makedevs /dev/hda b 3 0 0 8 s\n" \
- "[creates hda,hda1-hda8]\n"
-#endif
-
-#if ENABLE_FEATURE_MAKEDEVS_TABLE
-#define makedevs_trivial_usage \
- "[-d device_table] rootdir"
-#define makedevs_full_usage "\n\n" \
- "Create a range of special files as specified in a device table.\n" \
- "Device table entries take the form of:\n" \
- "<type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>\n" \
- "Where name is the file name, type can be one of:\n" \
- " f Regular file\n" \
- " d Directory\n" \
- " c Character device\n" \
- " b Block device\n" \
- " p Fifo (named pipe)\n" \
- "uid is the user id for the target file, gid is the group id for the\n" \
- "target file. The rest of the entries (major, minor, etc) apply to\n" \
- "to device special files. A '-' may be used for blank entries."
-#define makedevs_example_usage \
- "For example:\n" \
- "<name> <type> <mode><uid><gid><major><minor><start><inc><count>\n" \
- "/dev d 755 0 0 - - - - -\n" \
- "/dev/console c 666 0 0 5 1 - - -\n" \
- "/dev/null c 666 0 0 1 3 0 0 -\n" \
- "/dev/zero c 666 0 0 1 5 0 0 -\n" \
- "/dev/hda b 640 0 0 3 0 0 0 -\n" \
- "/dev/hda b 640 0 0 3 1 1 1 15\n\n" \
- "Will Produce:\n" \
- "/dev\n" \
- "/dev/console\n" \
- "/dev/null\n" \
- "/dev/zero\n" \
- "/dev/hda\n" \
- "/dev/hda[0-15]\n"
-#endif
-
-#define makemime_trivial_usage \
- "[OPTIONS] [FILE]..."
-#define makemime_full_usage "\n\n" \
- "Create multipart MIME-encoded message from FILEs\n" \
-/* "Transfer encoding is base64, disposition is inline (not attachment)\n" */ \
- "\nOptions:" \
- "\n -o FILE Output. Default: stdout" \
- "\n -a HDR Add header. Examples:" \
- "\n \"From: user@host.org\", \"Date: `date -R`\"" \
- "\n -c CT Content type. Default: text/plain" \
- "\n -C CS Charset. Default: " CONFIG_FEATURE_MIME_CHARSET \
-/* "\n -e ENC Transfer encoding. Ignored. base64 is assumed" */ \
- "\n" \
- "\nOther options are silently ignored" \
-
-#define man_trivial_usage \
- "[OPTIONS] [MANPAGE]..."
-#define man_full_usage "\n\n" \
- "Format and display manual page\n" \
- "\nOptions:" \
- "\n -a Display all pages" \
- "\n -w Show page locations" \
-
-#define matchpathcon_trivial_usage \
- "[-n] [-N] [-f file_contexts_file] [-p prefix] [-V]"
-#define matchpathcon_full_usage "\n\n" \
- " -n Don't display path" \
- "\n -N Don't use translations" \
- "\n -f Use alternate file_context file" \
- "\n -p Use prefix to speed translations" \
- "\n -V Verify file context on disk matches defaults" \
-
-#define md5sum_trivial_usage \
- "[OPTIONS] [FILE]..." \
- IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: md5sum [OPTIONS] -c [FILE]")
-#define md5sum_full_usage "\n\n" \
- "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums" \
- IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
- "\nOptions:" \
- "\n -c Check sums against given list" \
- "\n -s Don't output anything, status code shows success" \
- "\n -w Warn about improperly formatted checksum lines" \
- )
-
-#define md5sum_example_usage \
- "$ md5sum < busybox\n" \
- "6fd11e98b98a58f64ff3398d7b324003\n" \
- "$ md5sum busybox\n" \
- "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
- "$ md5sum -c -\n" \
- "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
- "busybox: OK\n" \
- "^D\n"
-
-#define sha1sum_trivial_usage \
- "[OPTIONS] [FILE]..." \
- IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha1sum [OPTIONS] -c [FILE]")
-#define sha1sum_full_usage "\n\n" \
- "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums" \
- IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
- "\nOptions:" \
- "\n -c Check sums against given list" \
- "\n -s Don't output anything, status code shows success" \
- "\n -w Warn about improperly formatted checksum lines" \
- )
-
-#define sha256sum_trivial_usage \
- "[OPTIONS] [FILE]..." \
- IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha256sum [OPTIONS] -c [FILE]")
-#define sha256sum_full_usage "\n\n" \
- "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA256 checksums" \
- IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
- "\nOptions:" \
- "\n -c Check sums against given list" \
- "\n -s Don't output anything, status code shows success" \
- "\n -w Warn about improperly formatted checksum lines" \
- )
-
-#define sha512sum_trivial_usage \
- "[OPTIONS] [FILE]..." \
- IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha512sum [OPTIONS] -c [FILE]")
-#define sha512sum_full_usage "\n\n" \
- "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA512 checksums" \
- IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
- "\nOptions:" \
- "\n -c Check sums against given list" \
- "\n -s Don't output anything, status code shows success" \
- "\n -w Warn about improperly formatted checksum lines" \
- )
-
-#define mdev_trivial_usage \
- "[-s]"
-#define mdev_full_usage "\n\n" \
- " -s Scan /sys and populate /dev during system boot\n" \
- "\n" \
- "It can be run by kernel as a hotplug helper. To activate it:\n" \
- " echo /sbin/mdev > /proc/sys/kernel/hotplug\n" \
- IF_FEATURE_MDEV_CONF( \
- "It uses /etc/mdev.conf with lines\n" \
- "[-]DEVNAME UID:GID PERM" \
- IF_FEATURE_MDEV_RENAME(" [>|=PATH]") \
- IF_FEATURE_MDEV_EXEC(" [@|$|*PROG]") \
- ) \
-
-#define mdev_notes_usage "" \
- IF_FEATURE_MDEV_CONFIG( \
- "The mdev config file contains lines that look like:\n" \
- " hd[a-z][0-9]* 0:3 660\n\n" \
- "That's device name (with regex match), uid:gid, and permissions.\n\n" \
- IF_FEATURE_MDEV_EXEC( \
- "Optionally, that can be followed (on the same line) by a special character\n" \
- "and a command line to run after creating/before deleting the corresponding\n" \
- "device(s). The environment variable $MDEV indicates the active device node\n" \
- "(which is useful if it's a regex match). For example:\n\n" \
- " hdc root:cdrom 660 *ln -s $MDEV cdrom\n\n" \
- "The special characters are @ (run after creating), $ (run before deleting),\n" \
- "and * (run both after creating and before deleting). The commands run in\n" \
- "the /dev directory, and use system() which calls /bin/sh.\n\n" \
- ) \
- "Config file parsing stops on the first matching line. If no config\n" \
- "entry is matched, devices are created with default 0:0 660. (Make\n" \
- "the last line match .* to override this.)\n\n" \
- )
-
-#define mesg_trivial_usage \
- "[y|n]"
-#define mesg_full_usage "\n\n" \
- "Control write access to your terminal\n" \
- " y Allow write access to your terminal\n" \
- " n Disallow write access to your terminal"
-
-#define microcom_trivial_usage \
- "[-d DELAY] [-t TIMEOUT] [-s SPEED] [-X] TTY"
-#define microcom_full_usage "\n\n" \
- "Copy bytes for stdin to TTY and from TTY to stdout\n" \
- "\nOptions:" \
- "\n -d Wait up to DELAY ms for TTY output before sending every" \
- "\n next byte to it" \
- "\n -t Exit if both stdin and TTY are silent for TIMEOUT ms" \
- "\n -s Set serial line to SPEED" \
- "\n -X Disable special meaning of NUL and Ctrl-X from stdin" \
-
-#define mkdir_trivial_usage \
- "[OPTIONS] DIRECTORY..."
-#define mkdir_full_usage "\n\n" \
- "Create DIRECTORY\n" \
- "\nOptions:" \
- "\n -m Mode" \
- "\n -p No error if exists; make parent directories as needed" \
- IF_SELINUX( \
- "\n -Z Set security context" \
- )
-
-#define mkdir_example_usage \
- "$ mkdir /tmp/foo\n" \
- "$ mkdir /tmp/foo\n" \
- "/tmp/foo: File exists\n" \
- "$ mkdir /tmp/foo/bar/baz\n" \
- "/tmp/foo/bar/baz: No such file or directory\n" \
- "$ mkdir -p /tmp/foo/bar/baz\n"
-
-#define mkfifo_trivial_usage \
- "[OPTIONS] name"
-#define mkfifo_full_usage "\n\n" \
- "Create named pipe (identical to 'mknod name p')\n" \
- "\nOptions:" \
- "\n -m MODE Mode (default a=rw)" \
- IF_SELINUX( \
- "\n -Z Set security context" \
- )
-
-#define mkfs_ext2_trivial_usage \
- "[-Fn] " \
- /* "[-c|-l filename] " */ \
- "[-b BLK_SIZE] " \
- /* "[-f fragment-size] [-g blocks-per-group] " */ \
- "[-i INODE_RATIO] [-I INODE_SIZE] " \
- /* "[-j] [-J journal-options] [-N number-of-inodes] " */ \
- "[-m RESERVED_PERCENT] " \
- /* "[-o creator-os] [-O feature[,...]] [-q] " */ \
- /* "[r fs-revision-level] [-E extended-options] [-v] [-F] " */ \
- "[-L LABEL] " \
- /* "[-M last-mounted-directory] [-S] [-T filesystem-type] " */ \
- "BLOCKDEV [KBYTES]"
-#define mkfs_ext2_full_usage "\n\n" \
- " -b BLK_SIZE Block size, bytes" \
-/* "\n -c Check device for bad blocks" */ \
-/* "\n -E opts Set extended options" */ \
-/* "\n -f size Fragment size in bytes" */ \
- "\n -F Force" \
-/* "\n -g N Number of blocks in a block group" */ \
- "\n -i RATIO Max number of files is filesystem_size / RATIO" \
- "\n -I BYTES Inode size (min 128)" \
-/* "\n -j Create a journal (ext3)" */ \
-/* "\n -J opts Set journal options (size/device)" */ \
-/* "\n -l file Read bad blocks list from file" */ \
- "\n -L LBL Volume label" \
- "\n -m PERCENT Percent of blocks to reserve for admin" \
-/* "\n -M dir Set last mounted directory" */ \
- "\n -n Dry run" \
-/* "\n -N N Number of inodes to create" */ \
-/* "\n -o os Set the 'creator os' field" */ \
-/* "\n -O features Dir_index/filetype/has_journal/journal_dev/sparse_super" */ \
-/* "\n -q Quiet" */ \
-/* "\n -r rev Set filesystem revision" */ \
-/* "\n -S Write superblock and group descriptors only" */ \
-/* "\n -T fs-type Set usage type (news/largefile/largefile4)" */ \
-/* "\n -v Verbose" */ \
-
-#define mkfs_minix_trivial_usage \
- "[-c | -l FILE] [-nXX] [-iXX] BLOCKDEV [KBYTES]"
-#define mkfs_minix_full_usage "\n\n" \
- "Make a MINIX filesystem\n" \
- "\nOptions:" \
- "\n -c Check device for bad blocks" \
- "\n -n [14|30] Maximum length of filenames" \
- "\n -i INODES Number of inodes for the filesystem" \
- "\n -l FILE Read bad blocks list from FILE" \
- "\n -v Make version 2 filesystem" \
-
-#define mkfs_reiser_trivial_usage \
- "[-f] [-l LABEL] BLOCKDEV [4K-BLOCKS]"
-
-#define mkfs_reiser_full_usage "\n\n" \
- "Make a ReiserFS V3 filesystem\n" \
- "\nOptions:" \
- "\n -f Force" \
- "\n -l LBL Volume label" \
-
-#define mkfs_vfat_trivial_usage \
- "[-v] [-n LABEL] BLOCKDEV [KBYTES]"
-/* Accepted but ignored:
- "[-c] [-C] [-I] [-l bad-block-file] [-b backup-boot-sector] "
- "[-m boot-msg-file] [-i volume-id] "
- "[-s sectors-per-cluster] [-S logical-sector-size] [-f number-of-FATs] "
- "[-h hidden-sectors] [-F fat-size] [-r root-dir-entries] [-R reserved-sectors] "
-*/
-#define mkfs_vfat_full_usage "\n\n" \
- "Make a FAT32 filesystem\n" \
- "\nOptions:" \
-/* "\n -c Check device for bad blocks" */ \
- "\n -v Verbose" \
-/* "\n -I Allow to use entire disk device (e.g. /dev/hda)" */ \
- "\n -n LBL Volume label" \
-
-#define mknod_trivial_usage \
- "[OPTIONS] NAME TYPE MAJOR MINOR"
-#define mknod_full_usage "\n\n" \
- "Create a special file (block, character, or pipe)\n" \
- "\nOptions:" \
- "\n -m Create the special file using the specified mode (default a=rw)" \
- "\nTYPEs include:" \
- "\n b: Make a block device" \
- "\n c or u: Make a character device" \
- "\n p: Make a named pipe (MAJOR and MINOR are ignored)" \
- IF_SELINUX( \
- "\n -Z Set security context" \
- )
-
-#define mknod_example_usage \
- "$ mknod /dev/fd0 b 2 0\n" \
- "$ mknod -m 644 /tmp/pipe p\n"
-
-#define mkswap_trivial_usage \
- "[OPTIONS] BLOCKDEV [KBYTES]"
-#define mkswap_full_usage "\n\n" \
- "Prepare BLOCKDEV to be used as swap partition\n" \
- "\nOptions:" \
- "\n -L LBL Label" \
-
-#define mktemp_trivial_usage \
- "[-dt] [-p DIR] [TEMPLATE]"
-#define mktemp_full_usage "\n\n" \
- "Create a temporary file with name based on TEMPLATE and print its name.\n" \
- "TEMPLATE must end with XXXXXX (e.g. [/dir/]nameXXXXXX).\n" \
- "\nOptions:" \
- "\n -d Make a directory instead of a file" \
-/* "\n -q Fail silently if an error occurs" - we ignore it */ \
- "\n -t Generate a path rooted in temporary directory" \
- "\n -p DIR Use DIR as a temporary directory (implies -t)" \
- "\n" \
- "\nFor -t or -p, directory is chosen as follows:" \
- "\n$TMPDIR if set, else -p DIR, else /tmp" \
-
-#define mktemp_example_usage \
- "$ mktemp /tmp/temp.XXXXXX\n" \
- "/tmp/temp.mWiLjM\n" \
- "$ ls -la /tmp/temp.mWiLjM\n" \
- "-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n"
-
-#define modprobe_trivial_usage \
- IF_MODPROBE_SMALL("[-qfwrsv] MODULE [symbol=value]...") \
- IF_NOT_MODPROBE_SMALL("[-" \
- IF_FEATURE_2_4_MODULES("k")"nqrsv" \
- IF_FEATURE_MODPROBE_BLACKLIST("b")"] MODULE [symbol=value]...")
-#define modprobe_full_usage "\n\n" \
- "Options:" \
- IF_MODPROBE_SMALL( \
- "\n -q Quiet" \
- "\n -f Force" \
- "\n -w Wait for unload" \
- "\n -r Remove module (stacks) or do autoclean" \
- "\n -s Report via syslog instead of stderr" \
- "\n -v Verbose" \
- ) \
- IF_NOT_MODPROBE_SMALL( \
- IF_FEATURE_2_4_MODULES( \
- "\n -k Make module autoclean-able" \
- ) \
- "\n -n Dry run" \
- "\n -q Quiet" \
- "\n -r Remove module (stacks) or do autoclean" \
- "\n -s Report via syslog instead of stderr" \
- "\n -v Verbose" \
- IF_FEATURE_MODPROBE_BLACKLIST( \
- "\n -b Apply blacklist to module names too" \
- ) \
- )
-
-#define modprobe_notes_usage \
-"modprobe can (un)load a stack of modules, passing each module options (when\n" \
-"loading). modprobe uses a configuration file to determine what option(s) to\n" \
-"pass each module it loads.\n" \
-"\n" \
-"The configuration file is searched (in this order):\n" \
-"\n" \
-" /etc/modprobe.conf (2.6 only)\n" \
-" /etc/modules.conf\n" \
-" /etc/conf.modules (deprecated)\n" \
-"\n" \
-"They all have the same syntax (see below). If none is present, it is\n" \
-"_not_ an error; each loaded module is then expected to load without\n" \
-"options. Once a file is found, the others are tested for.\n" \
-"\n" \
-"/etc/modules.conf entry format:\n" \
-"\n" \
-" alias <alias_name> <mod_name>\n" \
-" Makes it possible to modprobe alias_name, when there is no such module.\n" \
-" It makes sense if your mod_name is long, or you want a more representative\n" \
-" name for that module (eg. 'scsi' in place of 'aha7xxx').\n" \
-" This makes it also possible to use a different set of options (below) for\n" \
-" the module and the alias.\n" \
-" A module can be aliased more than once.\n" \
-"\n" \
-" options <mod_name|alias_name> <symbol=value...>\n" \
-" When loading module mod_name (or the module aliased by alias_name), pass\n" \
-" the \"symbol=value\" pairs as option to that module.\n" \
-"\n" \
-"Sample /etc/modules.conf file:\n" \
-"\n" \
-" options tulip irq=3\n" \
-" alias tulip tulip2\n" \
-" options tulip2 irq=4 io=0x308\n" \
-"\n" \
-"Other functionality offered by 'classic' modprobe is not available in\n" \
-"this implementation.\n" \
-"\n" \
-"If module options are present both in the config file, and on the command line,\n" \
-"then the options from the command line will be passed to the module _after_\n" \
-"the options from the config file. That way, you can have defaults in the config\n" \
-"file, and override them for a specific usage from the command line.\n"
-#define modprobe_example_usage \
- "(with the above /etc/modules.conf):\n\n" \
- "$ modprobe tulip\n" \
- " will load the module 'tulip' with default option 'irq=3'\n\n" \
- "$ modprobe tulip irq=5\n" \
- " will load the module 'tulip' with option 'irq=5', thus overriding the default\n\n" \
- "$ modprobe tulip2\n" \
- " will load the module 'tulip' with default options 'irq=4 io=0x308',\n" \
- " which are the default for alias 'tulip2'\n\n" \
- "$ modprobe tulip2 irq=8\n" \
- " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=8',\n" \
- " which are the default for alias 'tulip2' overridden by the option 'irq=8'\n\n" \
- " from the command line\n\n" \
- "$ modprobe tulip2 irq=2 io=0x210\n" \
- " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=4 io=0x210',\n" \
- " which are the default for alias 'tulip2' overridden by the options 'irq=2 io=0x210'\n\n" \
- " from the command line\n"
-
-#define more_trivial_usage \
- "[FILE]..."
-#define more_full_usage "\n\n" \
- "View FILE (or stdin) one screenful at a time"
-
-#define more_example_usage \
- "$ dmesg | more\n"
-
-#define mount_trivial_usage \
- "[OPTIONS] [-o OPTS] DEVICE NODE"
-#define mount_full_usage "\n\n" \
- "Mount a filesystem. Filesystem autodetection requires /proc.\n" \
- "\nOptions:" \
- "\n -a Mount all filesystems in fstab" \
- IF_FEATURE_MOUNT_FAKE( \
- IF_FEATURE_MTAB_SUPPORT( \
- "\n -f Update /etc/mtab, but don't mount" \
- ) \
- IF_NOT_FEATURE_MTAB_SUPPORT( \
- "\n -f Dry run" \
- ) \
- ) \
- IF_FEATURE_MOUNT_HELPERS( \
- "\n -i Don't run mount helper" \
- ) \
- IF_FEATURE_MTAB_SUPPORT( \
- "\n -n Don't update /etc/mtab" \
- ) \
- "\n -r Read-only mount" \
- "\n -w Read-write mount (default)" \
- "\n -t FSTYPE Filesystem type" \
- "\n -O OPT Mount only filesystems with option OPT (-a only)" \
- "\n-o OPT:" \
- IF_FEATURE_MOUNT_LOOP( \
- "\n loop Ignored (loop devices are autodetected)" \
- ) \
- IF_FEATURE_MOUNT_FLAGS( \
- "\n [a]sync Writes are [a]synchronous" \
- "\n [no]atime Disable/enable updates to inode access times" \
- "\n [no]diratime Disable/enable atime updates to directories" \
- "\n [no]relatime Disable/enable atime updates relative to modification time" \
- "\n [no]dev (Dis)allow use of special device files" \
- "\n [no]exec (Dis)allow use of executable files" \
- "\n [no]suid (Dis)allow set-user-id-root programs" \
- "\n [r]shared Convert [recursively] to a shared subtree" \
- "\n [r]slave Convert [recursively] to a slave subtree" \
- "\n [r]private Convert [recursively] to a private subtree" \
- "\n [un]bindable Make mount point [un]able to be bind mounted" \
- "\n bind Bind a file or directory to another location" \
- "\n move Relocate an existing mount point" \
- ) \
- "\n remount Remount a mounted filesystem, changing flags" \
- "\n ro/rw Same as -r/-w" \
- "\n" \
- "\nThere are filesystem-specific -o flags." \
-
-#define mount_example_usage \
- "$ mount\n" \
- "/dev/hda3 on / type minix (rw)\n" \
- "proc on /proc type proc (rw)\n" \
- "devpts on /dev/pts type devpts (rw)\n" \
- "$ mount /dev/fd0 /mnt -t msdos -o ro\n" \
- "$ mount /tmp/diskimage /opt -t ext2 -o loop\n" \
- "$ mount cd_image.iso mydir\n"
-#define mount_notes_usage \
- "Returns 0 for success, number of failed mounts for -a, or errno for one mount."
-
-#define mountpoint_trivial_usage \
- "[-q] <[-dn] DIR | -x DEVICE>"
-#define mountpoint_full_usage "\n\n" \
- "Check if the directory is a mountpoint\n" \
- "\nOptions:" \
- "\n -q Quiet" \
- "\n -d Print major/minor device number of the filesystem" \
- "\n -n Print device name of the filesystem" \
- "\n -x Print major/minor device number of the blockdevice" \
-
-#define mountpoint_example_usage \
- "$ mountpoint /proc\n" \
- "/proc is not a mountpoint\n" \
- "$ mountpoint /sys\n" \
- "/sys is a mountpoint\n"
-
-#define mt_trivial_usage \
- "[-f device] opcode value"
-#define mt_full_usage "\n\n" \
- "Control magnetic tape drive operation\n" \
- "\n" \
- "Available Opcodes:\n" \
- "\n" \
- "bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \
- "fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \
- "ras3 reset retension rewind rewoffline seek setblk setdensity\n" \
- "setpart tell unload unlock weof wset" \
-
-#define mv_trivial_usage \
- "[OPTIONS] SOURCE DEST\n" \
- "or: mv [OPTIONS] SOURCE... DIRECTORY"
-#define mv_full_usage "\n\n" \
- "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY\n" \
- "\nOptions:" \
- "\n -f Don't prompt before overwriting" \
- "\n -i Interactive, prompt before overwrite" \
-
-#define mv_example_usage \
- "$ mv /tmp/foo /bin/bar\n"
-
-#define nameif_trivial_usage \
- "[-s] [-c FILE] [{IFNAME MACADDR}]"
-#define nameif_full_usage "\n\n" \
- "Rename network interface while it in the down state\n" \
- "\nOptions:" \
- "\n -c FILE Use configuration file (default: /etc/mactab)" \
- "\n -s Use syslog (LOCAL0 facility)" \
- "\n IFNAME MACADDR new_interface_name interface_mac_address" \
-
-#define nameif_example_usage \
- "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \
- " or\n" \
- "$ nameif -c /etc/my_mactab_file\n" \
-
-#if !ENABLE_DESKTOP
-
-#if ENABLE_NC_SERVER || ENABLE_NC_EXTRA
-#define NC_OPTIONS_STR "\n\nOptions:"
-#else
-#define NC_OPTIONS_STR
-#endif
-
-#define nc_trivial_usage \
- IF_NC_EXTRA("[-iN] [-wN] ")IF_NC_SERVER("[-l] [-p PORT] ") \
- "["IF_NC_EXTRA("-f FILENAME|")"IPADDR PORT]"IF_NC_EXTRA(" [-e PROG]")
-#define nc_full_usage "\n\n" \
- "Open a pipe to IP:port" IF_NC_EXTRA(" or file") \
- NC_OPTIONS_STR \
- IF_NC_EXTRA( \
- "\n -e PROG Run PROG after connect" \
- "\n -i SEC Delay interval for lines sent" \
- "\n -w SEC Timeout for connect" \
- "\n -f FILE Use file (ala /dev/ttyS0) instead of network" \
- ) \
- IF_NC_SERVER( \
- "\n -l Listen mode, for inbound connects" \
- IF_NC_EXTRA( \
- "\n (use -l twice with -e for persistent server)") \
- "\n -p PORT Local port" \
- )
-
-#define nc_notes_usage "" \
- IF_NC_EXTRA( \
- "To use netcat as a terminal emulator on a serial port:\n\n" \
- "$ stty 115200 -F /dev/ttyS0\n" \
- "$ stty raw -echo -ctlecho && nc -f /dev/ttyS0\n" \
- )
-
-#define nc_example_usage \
- "$ nc foobar.somedomain.com 25\n" \
- "220 foobar ESMTP Exim 3.12 #1 Sat, 15 Apr 2000 00:03:02 -0600\n" \
- "help\n" \
- "214-Commands supported:\n" \
- "214- HELO EHLO MAIL RCPT DATA AUTH\n" \
- "214 NOOP QUIT RSET HELP\n" \
- "quit\n" \
- "221 foobar closing connection\n"
-
-#else /* DESKTOP nc - much more compatible with nc 1.10 */
-
-#define nc_trivial_usage \
- "[OPTIONS] HOST PORT - connect" \
- IF_NC_SERVER("\n" \
- "nc [OPTIONS] -l -p PORT [HOST] [PORT] - listen")
-#define nc_full_usage "\n\n" \
- "Options:" \
- "\n -e PROG Run PROG after connect (must be last)" \
- IF_NC_SERVER( \
- "\n -l Listen mode, for inbound connects" \
- ) \
- "\n -n Don't do DNS resolution" \
- "\n -s ADDR Local address" \
- "\n -p PORT Local port" \
- "\n -u UDP mode" \
- "\n -v Verbose" \
- "\n -w SEC Timeout for connects and final net reads" \
- IF_NC_EXTRA( \
- "\n -i SEC Delay interval for lines sent" /* ", ports scanned" */ \
- "\n -o FILE Hex dump traffic" \
- "\n -z Zero-I/O mode (scanning)" \
- ) \
-/* "\n -r Randomize local and remote ports" */
-/* "\n -g gateway Source-routing hop point[s], up to 8" */
-/* "\n -G num Source-routing pointer: 4, 8, 12, ..." */
-/* "\nport numbers can be individual or ranges: lo-hi [inclusive]" */
-
-/* -e PROG can take ARGS too: "nc ... -e ls -l", but we don't document it
- * in help text: nc 1.10 does not allow that. We don't want to entice
- * users to use this incompatibility */
-
-#endif
-
-#define netstat_trivial_usage \
- "[-laentuwxr"IF_FEATURE_NETSTAT_WIDE("W")IF_FEATURE_NETSTAT_PRG("p")"]"
-#define netstat_full_usage "\n\n" \
- "Display networking information\n" \
- "\nOptions:" \
- "\n -l Display listening server sockets" \
- "\n -a Display all sockets (default: connected)" \
- "\n -e Display other/more information" \
- "\n -n Don't resolve names" \
- "\n -t Tcp sockets" \
- "\n -u Udp sockets" \
- "\n -w Raw sockets" \
- "\n -x Unix sockets" \
- "\n -r Display routing table" \
- IF_FEATURE_NETSTAT_WIDE( \
- "\n -W Display with no column truncation" \
- ) \
- IF_FEATURE_NETSTAT_PRG( \
- "\n -p Display PID/Program name for sockets" \
- )
-
-#define nice_trivial_usage \
- "[-n ADJUST] [PROG ARGS]"
-#define nice_full_usage "\n\n" \
- "Run PROG with modified scheduling priority\n" \
- "\nOptions:" \
- "\n -n ADJUST Adjust priority by ADJUST" \
-
-#define nmeter_trivial_usage \
- "format_string"
-#define nmeter_full_usage "\n\n" \
- "Monitor system in real time\n\n" \
- "Format specifiers:\n" \
- " %Nc or %[cN] Monitor CPU. N - bar size, default 10\n" \
- " (displays: S:system U:user N:niced D:iowait I:irq i:softirq)\n" \
- " %[niface] Monitor network interface 'iface'\n" \
- " %m Monitor allocated memory\n" \
- " %[mf] Monitor free memory\n" \
- " %[mt] Monitor total memory\n" \
- " %s Monitor allocated swap\n" \
- " %f Monitor number of used file descriptors\n" \
- " %Ni Monitor total/specific IRQ rate\n" \
- " %x Monitor context switch rate\n" \
- " %p Monitor forks\n" \
- " %[pn] Monitor # of processes\n" \
- " %b Monitor block io\n" \
- " %Nt Show time (with N decimal points)\n" \
- " %Nd Milliseconds between updates (default:1000)\n" \
- " %r Print <cr> instead of <lf> at EOL" \
-
-#define nmeter_example_usage \
- "nmeter '%250d%t %20c int %i bio %b mem %m forks%p'"
-
-#define nohup_trivial_usage \
- "PROG ARGS"
-#define nohup_full_usage "\n\n" \
- "Run PROG immune to hangups, with output to a non-tty"
-#define nohup_example_usage \
- "$ nohup make &"
-
-#define nslookup_trivial_usage \
- "[HOST] [SERVER]"
-#define nslookup_full_usage "\n\n" \
- "Query the nameserver for the IP address of the given HOST\n" \
- "optionally using a specified DNS server"
-#define nslookup_example_usage \
- "$ nslookup localhost\n" \
- "Server: default\n" \
- "Address: default\n" \
- "\n" \
- "Name: debian\n" \
- "Address: 127.0.0.1\n"
-
-#define ntpd_trivial_usage \
- "[-dnqwl] [-S PROG] [-p PEER]..."
-#define ntpd_full_usage "\n\n" \
- "NTP client/server\n" \
- "\nOptions:" \
- "\n -d Verbose" \
- "\n -n Do not daemonize" \
- "\n -q Quit after clock is set" \
-/* -N exists for mostly compat reasons, thus not essential to inform */ \
-/* the user that it exists: user may use nice as well */ \
-/* "\n -N Run at high priority" */ \
- "\n -w Do not set time (only query peers), implies -n" \
- "\n -l Run as server on port 123" \
- "\n -S PROG Run PROG after stepping time, stratum change, and every 11 mins" \
- "\n -p PEER Obtain time from PEER (may be repeated)" \
-
-#define od_trivial_usage \
- "[-aBbcDdeFfHhIiLlOovXx] " IF_DESKTOP("[-t TYPE] ") "[FILE]"
-#define od_full_usage "\n\n" \
- "Write an unambiguous representation, octal bytes by default, of FILE\n" \
- "(or stdin) to stdout"
-
-#define openvt_trivial_usage \
- "[-c N] [-sw] [PROG ARGS]"
-#define openvt_full_usage "\n\n" \
- "Start PROG on a new virtual terminal\n" \
- "\nOptions:" \
- "\n -c N Use specified VT" \
- "\n -s Switch to the VT" \
-/* "\n -l Run PROG as login shell (by prepending '-')" */ \
- "\n -w Wait for PROG to exit" \
-
-#define openvt_example_usage \
- "openvt 2 /bin/ash\n"
-
-/*
-#define parse_trivial_usage \
- "[-n MAXTOKENS] [-m MINTOKENS] [-d DELIMS] [-f FLAGS] FILE..."
-#define parse_full_usage ""
-*/
-
-#define passwd_trivial_usage \
- "[OPTIONS] [USER]"
-#define passwd_full_usage "\n\n" \
- "Change USER's password. If no USER is specified,\n" \
- "changes the password for the current user.\n" \
- "\nOptions:" \
- "\n -a Algorithm to use for password (des, md5)" /* ", sha1)" */ \
- "\n -d Delete password for the account" \
- "\n -l Lock (disable) account" \
- "\n -u Unlock (re-enable) account" \
-
-#define chpasswd_trivial_usage \
- IF_LONG_OPTS("[--md5|--encrypted]") IF_NOT_LONG_OPTS("[-m|-e]")
-#define chpasswd_full_usage "\n\n" \
- "Read user:password from stdin and update /etc/passwd\n" \
- "\nOptions:" \
- IF_LONG_OPTS( \
- "\n -e,--encrypted Supplied passwords are in encrypted form" \
- "\n -m,--md5 Use MD5 encryption instead of DES" \
- ) \
- IF_NOT_LONG_OPTS( \
- "\n -e Supplied passwords are in encrypted form" \
- "\n -m Use MD5 encryption instead of DES" \
- )
-
-#define patch_trivial_usage \
- "[OPTIONS] [ORIGFILE [PATCHFILE]]"
-#define patch_full_usage "\n\n" \
- IF_LONG_OPTS( \
- " -p,--strip N Strip N leading components from file names" \
- "\n -i,--input DIFF Read DIFF instead of stdin" \
- "\n -R,--reverse Reverse patch" \
- "\n -N,--forward Ignore already applied patches" \
- "\n --dry-run Don't actually change files" \
- ) \
- IF_NOT_LONG_OPTS( \
- " -p N Strip N leading components from file names" \
- "\n -i DIFF Read DIFF instead of stdin" \
- "\n -R Reverse patch" \
- "\n -N Ignore already applied patches" \
- )
-
-#define patch_example_usage \
- "$ patch -p1 < example.diff\n" \
- "$ patch -p0 -i example.diff"
-
-#define pgrep_trivial_usage \
- "[-flnovx] [-s SID|-P PPID|PATTERN]"
-#define pgrep_full_usage "\n\n" \
- "Display process(es) selected by regex PATTERN\n" \
- "\nOptions:" \
- "\n -l Show command name too" \
- "\n -f Match against entire command line" \
- "\n -n Show the newest process only" \
- "\n -o Show the oldest process only" \
- "\n -v Negate the match" \
- "\n -x Match whole name (not substring)" \
- "\n -s Match session ID (0 for current)" \
- "\n -P Match parent process ID" \
-
-#if (ENABLE_FEATURE_PIDOF_SINGLE || ENABLE_FEATURE_PIDOF_OMIT)
-#define pidof_trivial_usage \
- "[OPTIONS] [NAME]..."
-#define USAGE_PIDOF "\n\nOptions:"